drivers/staging/comedi/drivers/cb_pcidas64.c

   1 /*
   2     comedi/drivers/cb_pcidas64.c
   3     This is a driver for the ComputerBoards/MeasurementComputing PCI-DAS
   4     64xx, 60xx, and 4020 cards.
   5
   6     Author:  Frank Mori Hess <fmhess@users.sourceforge.net>
   7     Copyright (C) 2001, 2002 Frank Mori Hess
   8
   9     Thanks also go to the following people:
  10
  11     Steve Rosenbluth, for providing the source code for
  12     his pci-das6402 driver, and source code for working QNX pci-6402
  13     drivers by Greg Laird and Mariusz Bogacz.  None of the code was
  14     used directly here, but it was useful as an additional source of
  15     documentation on how to program the boards.
  16
  17     John Sims, for much testing and feedback on pcidas-4020 support.
  18
  19     COMEDI - Linux Control and Measurement Device Interface
  20     Copyright (C) 1997-8 David A. Schleef <ds@schleef.org>
  21
  22     This program is free software; you can redistribute it and/or modify
  23     it under the terms of the GNU General Public License as published by
  24     the Free Software Foundation; either version 2 of the License, or
  25     (at your option) any later version.
  26
  27     This program is distributed in the hope that it will be useful,
  28     but WITHOUT ANY WARRANTY; without even the implied warranty of
  29     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  30     GNU General Public License for more details.
  31 */
  32
  33 /*
  34  * Driver: cb_pcidas64
  35  * Description: MeasurementComputing PCI-DAS64xx, 60XX, and 4020 series
  36  *   with the PLX 9080 PCI controller
  37  * Author: Frank Mori Hess <fmhess@users.sourceforge.net>
  38  * Status: works
  39  * Updated: Fri, 02 Nov 2012 18:58:55 +0000
  40  * Devices: [Measurement Computing] PCI-DAS6402/16 (cb_pcidas64),
  41  *   PCI-DAS6402/12, PCI-DAS64/M1/16, PCI-DAS64/M2/16,
  42  *   PCI-DAS64/M3/16, PCI-DAS6402/16/JR, PCI-DAS64/M1/16/JR,
  43  *   PCI-DAS64/M2/16/JR, PCI-DAS64/M3/16/JR, PCI-DAS64/M1/14,
  44  *   PCI-DAS64/M2/14, PCI-DAS64/M3/14, PCI-DAS6013, PCI-DAS6014,
  45  *   PCI-DAS6023, PCI-DAS6025, PCI-DAS6030,
  46  *   PCI-DAS6031, PCI-DAS6032, PCI-DAS6033, PCI-DAS6034,
  47  *   PCI-DAS6035, PCI-DAS6036, PCI-DAS6040, PCI-DAS6052,
  48  *   PCI-DAS6070, PCI-DAS6071, PCI-DAS4020/12
  49  *
  50  * Configuration options:
  51  *   None.
  52  *
  53  * Manual attachment of PCI cards with the comedi_config utility is not
  54  * supported by this driver; they are attached automatically.
  55  *
  56  * These boards may be autocalibrated with the comedi_calibrate utility.
  57  *
  58  * To select the bnc trigger input on the 4020 (instead of the dio input),
  59  * specify a nonzero channel in the chanspec.  If you wish to use an external
  60  * master clock on the 4020, you may do so by setting the scan_begin_src
  61  * to TRIG_OTHER, and using an INSN_CONFIG_TIMER_1 configuration insn
  62  * to configure the divisor to use for the external clock.
  63  *
  64  * Some devices are not identified because the PCI device IDs are not yet
  65  * known. If you have such a board, please let the maintainers know.
  66  */
  67
  68 /*
  69
  70 TODO:
  71         make it return error if user attempts an ai command that uses the
  72         external queue, and an ao command simultaneously user counter subdevice
  73         there are a number of boards this driver will support when they are
  74         fully released, but does not yet since the pci device id numbers
  75         are not yet available.
  76
  77         support prescaled 100khz clock for slow pacing (not available on 6000
  78         series?)
  79
  80         make ao fifo size adjustable like ai fifo
  81 */
  82
  83 #include <linux/module.h>
  84 #include <linux/pci.h>
  85 #include <linux/delay.h>
  86 #include <linux/interrupt.h>
  87
  88 #include "../comedidev.h"
  89
  90 #include "8253.h"
  91 #include "8255.h"
  92 #include "plx9080.h"
  93 #include "comedi_fc.h"
  94
  95 #define TIMER_BASE 25           /*  40MHz master clock */
  96 /* 100kHz 'prescaled' clock for slow acquisition,
  97  * maybe I'll support this someday */
  98 #define PRESCALED_TIMER_BASE    10000
  99 #define DMA_BUFFER_SIZE 0x1000
 100
 101 /* maximum value that can be loaded into board's 24-bit counters*/
 102 static const int max_counter_value = 0xffffff;
 103
 104 /* PCI-DAS64xxx base addresses */
 105
 106 /* devpriv->main_iobase registers */
 107 enum write_only_registers {
 108         INTR_ENABLE_REG = 0x0,  /*  interrupt enable register */
 109         HW_CONFIG_REG = 0x2,    /*  hardware config register */
 110         DAQ_SYNC_REG = 0xc,
 111         DAQ_ATRIG_LOW_4020_REG = 0xc,
 112         ADC_CONTROL0_REG = 0x10,        /*  adc control register 0 */
 113         ADC_CONTROL1_REG = 0x12,        /*  adc control register 1 */
 114         CALIBRATION_REG = 0x14,
 115         /*  lower 16 bits of adc sample interval counter */
 116         ADC_SAMPLE_INTERVAL_LOWER_REG = 0x16,
 117         /*  upper 8 bits of adc sample interval counter */
 118         ADC_SAMPLE_INTERVAL_UPPER_REG = 0x18,
 119         /*  lower 16 bits of delay interval counter */
 120         ADC_DELAY_INTERVAL_LOWER_REG = 0x1a,
 121         /*  upper 8 bits of delay interval counter */
 122         ADC_DELAY_INTERVAL_UPPER_REG = 0x1c,
 123         /*  lower 16 bits of hardware conversion/scan counter */
 124         ADC_COUNT_LOWER_REG = 0x1e,
 125         /*  upper 8 bits of hardware conversion/scan counter */
 126         ADC_COUNT_UPPER_REG = 0x20,
 127         ADC_START_REG = 0x22,   /*  software trigger to start acquisition */
 128         ADC_CONVERT_REG = 0x24, /*  initiates single conversion */
 129         ADC_QUEUE_CLEAR_REG = 0x26,     /*  clears adc queue */
 130         ADC_QUEUE_LOAD_REG = 0x28,      /*  loads adc queue */
 131         ADC_BUFFER_CLEAR_REG = 0x2a,
 132         /*  high channel for internal queue, use adc_chan_bits() inline above */
 133         ADC_QUEUE_HIGH_REG = 0x2c,
 134         DAC_CONTROL0_REG = 0x50,        /*  dac control register 0 */
 135         DAC_CONTROL1_REG = 0x52,        /*  dac control register 0 */
 136         /*  lower 16 bits of dac sample interval counter */
 137         DAC_SAMPLE_INTERVAL_LOWER_REG = 0x54,
 138         /*  upper 8 bits of dac sample interval counter */
 139         DAC_SAMPLE_INTERVAL_UPPER_REG = 0x56,
 140         DAC_SELECT_REG = 0x60,
 141         DAC_START_REG = 0x64,
 142         DAC_BUFFER_CLEAR_REG = 0x66,    /*  clear dac buffer */
 143 };
 144
 145 static inline unsigned int dac_convert_reg(unsigned int channel)
 146 {
 147         return 0x70 + (2 * (channel & 0x1));
 148 }
 149
 150 static inline unsigned int dac_lsb_4020_reg(unsigned int channel)
 151 {
 152         return 0x70 + (4 * (channel & 0x1));
 153 }
 154
 155 static inline unsigned int dac_msb_4020_reg(unsigned int channel)
 156 {
 157         return 0x72 + (4 * (channel & 0x1));
 158 }
 159
 160 enum read_only_registers {
 161         /*  hardware status register,
 162          *  reading this apparently clears pending interrupts as well */
 163         HW_STATUS_REG = 0x0,
 164         PIPE1_READ_REG = 0x4,
 165         ADC_READ_PNTR_REG = 0x8,
 166         LOWER_XFER_REG = 0x10,
 167         ADC_WRITE_PNTR_REG = 0xc,
 168         PREPOST_REG = 0x14,
 169 };
 170
 171 enum read_write_registers {
 172         I8255_4020_REG = 0x48,  /*  8255 offset, for 4020 only */
 173         /*  external channel/gain queue, uses same bits as ADC_QUEUE_LOAD_REG */
 174         ADC_QUEUE_FIFO_REG = 0x100,
 175         ADC_FIFO_REG = 0x200,   /* adc data fifo */
 176         /* dac data fifo, has weird interactions with external channel queue */
 177         DAC_FIFO_REG = 0x300,
 178 };
 179
 180 /* dev->mmio registers */
 181 enum dio_counter_registers {
 182         DIO_8255_OFFSET = 0x0,
 183         DO_REG = 0x20,
 184         DI_REG = 0x28,
 185         DIO_DIRECTION_60XX_REG = 0x40,
 186         DIO_DATA_60XX_REG = 0x48,
 187 };
 188
 189 /* bit definitions for write-only registers */
 190
 191 enum intr_enable_contents {
 192         ADC_INTR_SRC_MASK = 0x3,        /*  adc interrupt source mask */
 193         ADC_INTR_QFULL_BITS = 0x0,      /*  interrupt fifo quarter full */
 194         ADC_INTR_EOC_BITS = 0x1,        /*  interrupt end of conversion */
 195         ADC_INTR_EOSCAN_BITS = 0x2,     /*  interrupt end of scan */
 196         ADC_INTR_EOSEQ_BITS = 0x3,      /*  interrupt end of sequence mask */
 197         EN_ADC_INTR_SRC_BIT = 0x4,      /*  enable adc interrupt source */
 198         EN_ADC_DONE_INTR_BIT = 0x8,     /*  enable adc acquisition done intr */
 199         DAC_INTR_SRC_MASK = 0x30,
 200         DAC_INTR_QEMPTY_BITS = 0x0,
 201         DAC_INTR_HIGH_CHAN_BITS = 0x10,
 202         EN_DAC_INTR_SRC_BIT = 0x40,     /*  enable dac interrupt source */
 203         EN_DAC_DONE_INTR_BIT = 0x80,
 204         EN_ADC_ACTIVE_INTR_BIT = 0x200, /*  enable adc active interrupt */
 205         EN_ADC_STOP_INTR_BIT = 0x400,   /*  enable adc stop trigger interrupt */
 206         EN_DAC_ACTIVE_INTR_BIT = 0x800, /*  enable dac active interrupt */
 207         EN_DAC_UNDERRUN_BIT = 0x4000,   /*  enable dac underrun status bit */
 208         EN_ADC_OVERRUN_BIT = 0x8000,    /*  enable adc overrun status bit */
 209 };
 210
 211 enum hw_config_contents {
 212         MASTER_CLOCK_4020_MASK = 0x3,   /*  master clock source mask for 4020 */
 213         INTERNAL_CLOCK_4020_BITS = 0x1, /*  use 40 MHz internal master clock */
 214         BNC_CLOCK_4020_BITS = 0x2,      /*  use BNC input for master clock */
 215         EXT_CLOCK_4020_BITS = 0x3,      /*  use dio input for master clock */
 216         EXT_QUEUE_BIT = 0x200,          /*  use external channel/gain queue */
 217         /*  use 225 nanosec strobe when loading dac instead of 50 nanosec */
 218         SLOW_DAC_BIT = 0x400,
 219         /*  bit with unknown function yet given as default value in pci-das64
 220          *  manual */
 221         HW_CONFIG_DUMMY_BITS = 0x2000,
 222         /*  bit selects channels 1/0 for analog input/output, otherwise 0/1 */
 223         DMA_CH_SELECT_BIT = 0x8000,
 224         FIFO_SIZE_REG = 0x4,            /*  allows adjustment of fifo sizes */
 225         DAC_FIFO_SIZE_MASK = 0xff00,    /*  bits that set dac fifo size */
 226         DAC_FIFO_BITS = 0xf800,         /*  8k sample ao fifo */
 227 };
 228 #define DAC_FIFO_SIZE 0x2000
 229
 230 enum daq_atrig_low_4020_contents {
 231         /*  use trig/ext clk bnc input for analog gate signal */
 232         EXT_AGATE_BNC_BIT = 0x8000,
 233         /*  use trig/ext clk bnc input for external stop trigger signal */
 234         EXT_STOP_TRIG_BNC_BIT = 0x4000,
 235         /*  use trig/ext clk bnc input for external start trigger signal */
 236         EXT_START_TRIG_BNC_BIT = 0x2000,
 237 };
 238
 239 static inline uint16_t analog_trig_low_threshold_bits(uint16_t threshold)
 240 {
 241         return threshold & 0xfff;
 242 }
 243
 244 enum adc_control0_contents {
 245         ADC_GATE_SRC_MASK = 0x3,        /*  bits that select gate */
 246         ADC_SOFT_GATE_BITS = 0x1,       /*  software gate */
 247         ADC_EXT_GATE_BITS = 0x2,        /*  external digital gate */
 248         ADC_ANALOG_GATE_BITS = 0x3,     /*  analog level gate */
 249         ADC_GATE_LEVEL_BIT = 0x4,       /*  level-sensitive gate (for digital) */
 250         ADC_GATE_POLARITY_BIT = 0x8,    /*  gate active low */
 251         ADC_START_TRIG_SOFT_BITS = 0x10,
 252         ADC_START_TRIG_EXT_BITS = 0x20,
 253         ADC_START_TRIG_ANALOG_BITS = 0x30,
 254         ADC_START_TRIG_MASK = 0x30,
 255         ADC_START_TRIG_FALLING_BIT = 0x40,      /*  trig 1 uses falling edge */
 256         /*  external pacing uses falling edge */
 257         ADC_EXT_CONV_FALLING_BIT = 0x800,
 258         /*  enable hardware scan counter */
 259         ADC_SAMPLE_COUNTER_EN_BIT = 0x1000,
 260         ADC_DMA_DISABLE_BIT = 0x4000,   /*  disables dma */
 261         ADC_ENABLE_BIT = 0x8000,        /*  master adc enable */
 262 };
 263
 264 enum adc_control1_contents {
 265         /*  should be set for boards with > 16 channels */
 266         ADC_QUEUE_CONFIG_BIT = 0x1,
 267         CONVERT_POLARITY_BIT = 0x10,
 268         EOC_POLARITY_BIT = 0x20,
 269         ADC_SW_GATE_BIT = 0x40, /*  software gate of adc */
 270         ADC_DITHER_BIT = 0x200, /*  turn on extra noise for dithering */
 271         RETRIGGER_BIT = 0x800,
 272         ADC_LO_CHANNEL_4020_MASK = 0x300,
 273         ADC_HI_CHANNEL_4020_MASK = 0xc00,
 274         TWO_CHANNEL_4020_BITS = 0x1000, /*  two channel mode for 4020 */
 275         FOUR_CHANNEL_4020_BITS = 0x2000, /*  four channel mode for 4020 */
 276         CHANNEL_MODE_4020_MASK = 0x3000,
 277         ADC_MODE_MASK = 0xf000,
 278 };
 279
 280 static inline uint16_t adc_lo_chan_4020_bits(unsigned int channel)
 281 {
 282         return (channel & 0x3) << 8;
 283 };
 284
 285 static inline uint16_t adc_hi_chan_4020_bits(unsigned int channel)
 286 {
 287         return (channel & 0x3) << 10;
 288 };
 289
 290 static inline uint16_t adc_mode_bits(unsigned int mode)
 291 {
 292         return (mode & 0xf) << 12;
 293 };
 294
 295 enum calibration_contents {
 296         SELECT_8800_BIT = 0x1,
 297         SELECT_8402_64XX_BIT = 0x2,
 298         SELECT_1590_60XX_BIT = 0x2,
 299         CAL_EN_64XX_BIT = 0x40, /*  calibration enable for 64xx series */
 300         SERIAL_DATA_IN_BIT = 0x80,
 301         SERIAL_CLOCK_BIT = 0x100,
 302         CAL_EN_60XX_BIT = 0x200, /*  calibration enable for 60xx series */
 303         CAL_GAIN_BIT = 0x800,
 304 };
 305
 306 /* calibration sources for 6025 are:
 307  *  0 : ground
 308  *  1 : 10V
 309  *  2 : 5V
 310  *  3 : 0.5V
 311  *  4 : 0.05V
 312  *  5 : ground
 313  *  6 : dac channel 0
 314  *  7 : dac channel 1
 315  */
 316
 317 static inline uint16_t adc_src_bits(unsigned int source)
 318 {
 319         return (source & 0xf) << 3;
 320 };
 321
 322 static inline uint16_t adc_convert_chan_4020_bits(unsigned int channel)
 323 {
 324         return (channel & 0x3) << 8;
 325 };
 326
 327 enum adc_queue_load_contents {
 328         UNIP_BIT = 0x800,       /*  unipolar/bipolar bit */
 329         ADC_SE_DIFF_BIT = 0x1000,       /*  single-ended/ differential bit */
 330         /*  non-referenced single-ended (common-mode input) */
 331         ADC_COMMON_BIT = 0x2000,
 332         QUEUE_EOSEQ_BIT = 0x4000,       /*  queue end of sequence */
 333         QUEUE_EOSCAN_BIT = 0x8000,      /*  queue end of scan */
 334 };
 335
 336 static inline uint16_t adc_chan_bits(unsigned int channel)
 337 {
 338         return channel & 0x3f;
 339 };
 340
 341 enum dac_control0_contents {
 342         DAC_ENABLE_BIT = 0x8000,        /*  dac controller enable bit */
 343         DAC_CYCLIC_STOP_BIT = 0x4000,
 344         DAC_WAVEFORM_MODE_BIT = 0x100,
 345         DAC_EXT_UPDATE_FALLING_BIT = 0x80,
 346         DAC_EXT_UPDATE_ENABLE_BIT = 0x40,
 347         WAVEFORM_TRIG_MASK = 0x30,
 348         WAVEFORM_TRIG_DISABLED_BITS = 0x0,
 349         WAVEFORM_TRIG_SOFT_BITS = 0x10,
 350         WAVEFORM_TRIG_EXT_BITS = 0x20,
 351         WAVEFORM_TRIG_ADC1_BITS = 0x30,
 352         WAVEFORM_TRIG_FALLING_BIT = 0x8,
 353         WAVEFORM_GATE_LEVEL_BIT = 0x4,
 354         WAVEFORM_GATE_ENABLE_BIT = 0x2,
 355         WAVEFORM_GATE_SELECT_BIT = 0x1,
 356 };
 357
 358 enum dac_control1_contents {
 359         DAC_WRITE_POLARITY_BIT = 0x800, /* board-dependent setting */
 360         DAC1_EXT_REF_BIT = 0x200,
 361         DAC0_EXT_REF_BIT = 0x100,
 362         DAC_OUTPUT_ENABLE_BIT = 0x80,   /*  dac output enable bit */
 363         DAC_UPDATE_POLARITY_BIT = 0x40, /* board-dependent setting */
 364         DAC_SW_GATE_BIT = 0x20,
 365         DAC1_UNIPOLAR_BIT = 0x8,
 366         DAC0_UNIPOLAR_BIT = 0x2,
 367 };
 368
 369 /* bit definitions for read-only registers */
 370 enum hw_status_contents {
 371         DAC_UNDERRUN_BIT = 0x1,
 372         ADC_OVERRUN_BIT = 0x2,
 373         DAC_ACTIVE_BIT = 0x4,
 374         ADC_ACTIVE_BIT = 0x8,
 375         DAC_INTR_PENDING_BIT = 0x10,
 376         ADC_INTR_PENDING_BIT = 0x20,
 377         DAC_DONE_BIT = 0x40,
 378         ADC_DONE_BIT = 0x80,
 379         EXT_INTR_PENDING_BIT = 0x100,
 380         ADC_STOP_BIT = 0x200,
 381 };
 382
 383 static inline uint16_t pipe_full_bits(uint16_t hw_status_bits)
 384 {
 385         return (hw_status_bits >> 10) & 0x3;
 386 };
 387
 388 static inline unsigned int dma_chain_flag_bits(uint16_t prepost_bits)
 389 {
 390         return (prepost_bits >> 6) & 0x3;
 391 }
 392
 393 static inline unsigned int adc_upper_read_ptr_code(uint16_t prepost_bits)
 394 {
 395         return (prepost_bits >> 12) & 0x3;
 396 }
 397
 398 static inline unsigned int adc_upper_write_ptr_code(uint16_t prepost_bits)
 399 {
 400         return (prepost_bits >> 14) & 0x3;
 401 }
 402
 403 /* I2C addresses for 4020 */
 404 enum i2c_addresses {
 405         RANGE_CAL_I2C_ADDR = 0x20,
 406         CALDAC0_I2C_ADDR = 0xc,
 407         CALDAC1_I2C_ADDR = 0xd,
 408 };
 409
 410 enum range_cal_i2c_contents {
 411         /*  bits that set what source the adc converter measures */
 412         ADC_SRC_4020_MASK = 0x70,
 413         /*  make bnc trig/ext clock threshold 0V instead of 2.5V */
 414         BNC_TRIG_THRESHOLD_0V_BIT = 0x80,
 415 };
 416
 417 static inline uint8_t adc_src_4020_bits(unsigned int source)
 418 {
 419         return (source << 4) & ADC_SRC_4020_MASK;
 420 };
 421
 422 static inline uint8_t attenuate_bit(unsigned int channel)
 423 {
 424         /*  attenuate channel (+-5V input range) */
 425         return 1 << (channel & 0x3);
 426 };
 427
 428 /* analog input ranges for 64xx boards */
 429 static const struct comedi_lrange ai_ranges_64xx = {
 430         8, {
 431                 BIP_RANGE(10),
 432                 BIP_RANGE(5),
 433                 BIP_RANGE(2.5),
 434                 BIP_RANGE(1.25),
 435                 UNI_RANGE(10),
 436                 UNI_RANGE(5),
 437                 UNI_RANGE(2.5),
 438                 UNI_RANGE(1.25)
 439         }
 440 };
 441
 442 /* analog input ranges for 60xx boards */
 443 static const struct comedi_lrange ai_ranges_60xx = {
 444         4, {
 445                 BIP_RANGE(10),
 446                 BIP_RANGE(5),
 447                 BIP_RANGE(0.5),
 448                 BIP_RANGE(0.05)
 449         }
 450 };
 451
 452 /* analog input ranges for 6030, etc boards */
 453 static const struct comedi_lrange ai_ranges_6030 = {
 454         14, {
 455                 BIP_RANGE(10),
 456                 BIP_RANGE(5),
 457                 BIP_RANGE(2),
 458                 BIP_RANGE(1),
 459                 BIP_RANGE(0.5),
 460                 BIP_RANGE(0.2),
 461                 BIP_RANGE(0.1),
 462                 UNI_RANGE(10),
 463                 UNI_RANGE(5),
 464                 UNI_RANGE(2),
 465                 UNI_RANGE(1),
 466                 UNI_RANGE(0.5),
 467                 UNI_RANGE(0.2),
 468                 UNI_RANGE(0.1)
 469         }
 470 };
 471
 472 /* analog input ranges for 6052, etc boards */
 473 static const struct comedi_lrange ai_ranges_6052 = {
 474         15, {
 475                 BIP_RANGE(10),
 476                 BIP_RANGE(5),
 477                 BIP_RANGE(2.5),
 478                 BIP_RANGE(1),
 479                 BIP_RANGE(0.5),
 480                 BIP_RANGE(0.25),
 481                 BIP_RANGE(0.1),
 482                 BIP_RANGE(0.05),
 483                 UNI_RANGE(10),
 484                 UNI_RANGE(5),
 485                 UNI_RANGE(2),
 486                 UNI_RANGE(1),
 487                 UNI_RANGE(0.5),
 488                 UNI_RANGE(0.2),
 489                 UNI_RANGE(0.1)
 490         }
 491 };
 492
 493 /* analog input ranges for 4020 board */
 494 static const struct comedi_lrange ai_ranges_4020 = {
 495         2, {
 496                 BIP_RANGE(5),
 497                 BIP_RANGE(1)
 498         }
 499 };
 500
 501 /* analog output ranges */
 502 static const struct comedi_lrange ao_ranges_64xx = {
 503         4, {
 504                 BIP_RANGE(5),
 505                 BIP_RANGE(10),
 506                 UNI_RANGE(5),
 507                 UNI_RANGE(10)
 508         }
 509 };
 510
 511 static const int ao_range_code_64xx[] = {
 512         0x0,
 513         0x1,
 514         0x2,
 515         0x3,
 516 };
 517
 518 static const int ao_range_code_60xx[] = {
 519         0x0,
 520 };
 521
 522 static const struct comedi_lrange ao_ranges_6030 = {
 523         2, {
 524                 BIP_RANGE(10),
 525                 UNI_RANGE(10)
 526         }
 527 };
 528
 529 static const int ao_range_code_6030[] = {
 530         0x0,
 531         0x2,
 532 };
 533
 534 static const struct comedi_lrange ao_ranges_4020 = {
 535         2, {
 536                 BIP_RANGE(5),
 537                 BIP_RANGE(10)
 538         }
 539 };
 540
 541 static const int ao_range_code_4020[] = {
 542         0x1,
 543         0x0,
 544 };
 545
 546 enum register_layout {
 547         LAYOUT_60XX,
 548         LAYOUT_64XX,
 549         LAYOUT_4020,
 550 };
 551
 552 struct hw_fifo_info {
 553         unsigned int num_segments;
 554         unsigned int max_segment_length;
 555         unsigned int sample_packing_ratio;
 556         uint16_t fifo_size_reg_mask;
 557 };
 558
 559 enum pcidas64_boardid {
 560         BOARD_PCIDAS6402_16,
 561         BOARD_PCIDAS6402_12,
 562         BOARD_PCIDAS64_M1_16,
 563         BOARD_PCIDAS64_M2_16,
 564         BOARD_PCIDAS64_M3_16,
 565         BOARD_PCIDAS6013,
 566         BOARD_PCIDAS6014,
 567         BOARD_PCIDAS6023,
 568         BOARD_PCIDAS6025,
 569         BOARD_PCIDAS6030,
 570         BOARD_PCIDAS6031,
 571         BOARD_PCIDAS6032,
 572         BOARD_PCIDAS6033,
 573         BOARD_PCIDAS6034,
 574         BOARD_PCIDAS6035,
 575         BOARD_PCIDAS6036,
 576         BOARD_PCIDAS6040,
 577         BOARD_PCIDAS6052,
 578         BOARD_PCIDAS6070,
 579         BOARD_PCIDAS6071,
 580         BOARD_PCIDAS4020_12,
 581         BOARD_PCIDAS6402_16_JR,
 582         BOARD_PCIDAS64_M1_16_JR,
 583         BOARD_PCIDAS64_M2_16_JR,
 584         BOARD_PCIDAS64_M3_16_JR,
 585         BOARD_PCIDAS64_M1_14,
 586         BOARD_PCIDAS64_M2_14,
 587         BOARD_PCIDAS64_M3_14,
 588 };
 589
 590 struct pcidas64_board {
 591         const char *name;
 592         int ai_se_chans;        /*  number of ai inputs in single-ended mode */
 593         int ai_bits;            /*  analog input resolution */
 594         int ai_speed;           /*  fastest conversion period in ns */
 595         const struct comedi_lrange *ai_range_table;
 596         int ao_nchan;           /*  number of analog out channels */
 597         int ao_bits;            /*  analog output resolution */
 598         int ao_scan_speed;      /*  analog output scan speed */
 599         const struct comedi_lrange *ao_range_table;
 600         const int *ao_range_code;
 601         const struct hw_fifo_info *const ai_fifo;
 602         /*  different board families have slightly different registers */
 603         enum register_layout layout;
 604         unsigned has_8255:1;
 605 };
 606
 607 static const struct hw_fifo_info ai_fifo_4020 = {
 608         .num_segments = 2,
 609         .max_segment_length = 0x8000,
 610         .sample_packing_ratio = 2,
 611         .fifo_size_reg_mask = 0x7f,
 612 };
 613
 614 static const struct hw_fifo_info ai_fifo_64xx = {
 615         .num_segments = 4,
 616         .max_segment_length = 0x800,
 617         .sample_packing_ratio = 1,
 618         .fifo_size_reg_mask = 0x3f,
 619 };
 620
 621 static const struct hw_fifo_info ai_fifo_60xx = {
 622         .num_segments = 4,
 623         .max_segment_length = 0x800,
 624         .sample_packing_ratio = 1,
 625         .fifo_size_reg_mask = 0x7f,
 626 };
 627
 628 /* maximum number of dma transfers we will chain together into a ring
 629  * (and the maximum number of dma buffers we maintain) */
 630 #define MAX_AI_DMA_RING_COUNT (0x80000 / DMA_BUFFER_SIZE)
 631 #define MIN_AI_DMA_RING_COUNT (0x10000 / DMA_BUFFER_SIZE)
 632 #define AO_DMA_RING_COUNT (0x10000 / DMA_BUFFER_SIZE)
 633 static inline unsigned int ai_dma_ring_count(const struct pcidas64_board *board)
 634 {
 635         if (board->layout == LAYOUT_4020)
 636                 return MAX_AI_DMA_RING_COUNT;
 637
 638         return MIN_AI_DMA_RING_COUNT;
 639 }
 640
 641 static const int bytes_in_sample = 2;
 642
 643 static const struct pcidas64_board pcidas64_boards[] = {
 644         [BOARD_PCIDAS6402_16] = {
 645                 .name           = "pci-das6402/16",
 646                 .ai_se_chans    = 64,
 647                 .ai_bits        = 16,
 648                 .ai_speed       = 5000,
 649                 .ao_nchan       = 2,
 650                 .ao_bits        = 16,
 651                 .ao_scan_speed  = 10000,
 652                 .layout         = LAYOUT_64XX,
 653                 .ai_range_table = &ai_ranges_64xx,
 654                 .ao_range_table = &ao_ranges_64xx,
 655                 .ao_range_code  = ao_range_code_64xx,
 656                 .ai_fifo        = &ai_fifo_64xx,
 657                 .has_8255       = 1,
 658         },
 659         [BOARD_PCIDAS6402_12] = {
 660                 .name           = "pci-das6402/12",     /*  XXX check */
 661                 .ai_se_chans    = 64,
 662                 .ai_bits        = 12,
 663                 .ai_speed       = 5000,
 664                 .ao_nchan       = 2,
 665                 .ao_bits        = 12,
 666                 .ao_scan_speed  = 10000,
 667                 .layout         = LAYOUT_64XX,
 668                 .ai_range_table = &ai_ranges_64xx,
 669                 .ao_range_table = &ao_ranges_64xx,
 670                 .ao_range_code  = ao_range_code_64xx,
 671                 .ai_fifo        = &ai_fifo_64xx,
 672                 .has_8255       = 1,
 673         },
 674         [BOARD_PCIDAS64_M1_16] = {
 675                 .name           = "pci-das64/m1/16",
 676                 .ai_se_chans    = 64,
 677                 .ai_bits        = 16,
 678                 .ai_speed       = 1000,
 679                 .ao_nchan       = 2,
 680                 .ao_bits        = 16,
 681                 .ao_scan_speed  = 10000,
 682                 .layout         = LAYOUT_64XX,
 683                 .ai_range_table = &ai_ranges_64xx,
 684                 .ao_range_table = &ao_ranges_64xx,
 685                 .ao_range_code  = ao_range_code_64xx,
 686                 .ai_fifo        = &ai_fifo_64xx,
 687                 .has_8255       = 1,
 688         },
 689         [BOARD_PCIDAS64_M2_16] = {
 690                 .name = "pci-das64/m2/16",
 691                 .ai_se_chans    = 64,
 692                 .ai_bits        = 16,
 693                 .ai_speed       = 500,
 694                 .ao_nchan       = 2,
 695                 .ao_bits        = 16,
 696                 .ao_scan_speed  = 10000,
 697                 .layout         = LAYOUT_64XX,
 698                 .ai_range_table = &ai_ranges_64xx,
 699                 .ao_range_table = &ao_ranges_64xx,
 700                 .ao_range_code  = ao_range_code_64xx,
 701                 .ai_fifo        = &ai_fifo_64xx,
 702                 .has_8255       = 1,
 703         },
 704         [BOARD_PCIDAS64_M3_16] = {
 705                 .name           = "pci-das64/m3/16",
 706                 .ai_se_chans    = 64,
 707                 .ai_bits        = 16,
 708                 .ai_speed       = 333,
 709                 .ao_nchan       = 2,
 710                 .ao_bits        = 16,
 711                 .ao_scan_speed  = 10000,
 712                 .layout         = LAYOUT_64XX,
 713                 .ai_range_table = &ai_ranges_64xx,
 714                 .ao_range_table = &ao_ranges_64xx,
 715                 .ao_range_code  = ao_range_code_64xx,
 716                 .ai_fifo        = &ai_fifo_64xx,
 717                 .has_8255       = 1,
 718         },
 719         [BOARD_PCIDAS6013] = {
 720                 .name           = "pci-das6013",
 721                 .ai_se_chans    = 16,
 722                 .ai_bits        = 16,
 723                 .ai_speed       = 5000,
 724                 .ao_nchan       = 0,
 725                 .ao_bits        = 16,
 726                 .layout         = LAYOUT_60XX,
 727                 .ai_range_table = &ai_ranges_60xx,
 728                 .ao_range_table = &range_bipolar10,
 729                 .ao_range_code  = ao_range_code_60xx,
 730                 .ai_fifo        = &ai_fifo_60xx,
 731                 .has_8255       = 0,
 732         },
 733         [BOARD_PCIDAS6014] = {
 734                 .name           = "pci-das6014",
 735                 .ai_se_chans    = 16,
 736                 .ai_bits        = 16,
 737                 .ai_speed       = 5000,
 738                 .ao_nchan       = 2,
 739                 .ao_bits        = 16,
 740                 .ao_scan_speed  = 100000,
 741                 .layout         = LAYOUT_60XX,
 742                 .ai_range_table = &ai_ranges_60xx,
 743                 .ao_range_table = &range_bipolar10,
 744                 .ao_range_code  = ao_range_code_60xx,
 745                 .ai_fifo        = &ai_fifo_60xx,
 746                 .has_8255       = 0,
 747         },
 748         [BOARD_PCIDAS6023] = {
 749                 .name           = "pci-das6023",
 750                 .ai_se_chans    = 16,
 751                 .ai_bits        = 12,
 752                 .ai_speed       = 5000,
 753                 .ao_nchan       = 0,
 754                 .ao_scan_speed  = 100000,
 755                 .layout         = LAYOUT_60XX,
 756                 .ai_range_table = &ai_ranges_60xx,
 757                 .ao_range_table = &range_bipolar10,
 758                 .ao_range_code  = ao_range_code_60xx,
 759                 .ai_fifo        = &ai_fifo_60xx,
 760                 .has_8255       = 1,
 761         },
 762         [BOARD_PCIDAS6025] = {
 763                 .name           = "pci-das6025",
 764                 .ai_se_chans    = 16,
 765                 .ai_bits        = 12,
 766                 .ai_speed       = 5000,
 767                 .ao_nchan       = 2,
 768                 .ao_bits        = 12,
 769                 .ao_scan_speed  = 100000,
 770                 .layout         = LAYOUT_60XX,
 771                 .ai_range_table = &ai_ranges_60xx,
 772                 .ao_range_table = &range_bipolar10,
 773                 .ao_range_code  = ao_range_code_60xx,
 774                 .ai_fifo        = &ai_fifo_60xx,
 775                 .has_8255       = 1,
 776         },
 777         [BOARD_PCIDAS6030] = {
 778                 .name           = "pci-das6030",
 779                 .ai_se_chans    = 16,
 780                 .ai_bits        = 16,
 781                 .ai_speed       = 10000,
 782                 .ao_nchan       = 2,
 783                 .ao_bits        = 16,
 784                 .ao_scan_speed  = 10000,
 785                 .layout         = LAYOUT_60XX,
 786                 .ai_range_table = &ai_ranges_6030,
 787                 .ao_range_table = &ao_ranges_6030,
 788                 .ao_range_code  = ao_range_code_6030,
 789                 .ai_fifo        = &ai_fifo_60xx,
 790                 .has_8255       = 0,
 791         },
 792         [BOARD_PCIDAS6031] = {
 793                 .name           = "pci-das6031",
 794                 .ai_se_chans    = 64,
 795                 .ai_bits        = 16,
 796                 .ai_speed       = 10000,
 797                 .ao_nchan       = 2,
 798                 .ao_bits        = 16,
 799                 .ao_scan_speed  = 10000,
 800                 .layout         = LAYOUT_60XX,
 801                 .ai_range_table = &ai_ranges_6030,
 802                 .ao_range_table = &ao_ranges_6030,
 803                 .ao_range_code  = ao_range_code_6030,
 804                 .ai_fifo        = &ai_fifo_60xx,
 805                 .has_8255       = 0,
 806         },
 807         [BOARD_PCIDAS6032] = {
 808                 .name           = "pci-das6032",
 809                 .ai_se_chans    = 16,
 810                 .ai_bits        = 16,
 811                 .ai_speed       = 10000,
 812                 .ao_nchan       = 0,
 813                 .layout         = LAYOUT_60XX,
 814                 .ai_range_table = &ai_ranges_6030,
 815                 .ai_fifo        = &ai_fifo_60xx,
 816                 .has_8255       = 0,
 817         },
 818         [BOARD_PCIDAS6033] = {
 819                 .name           = "pci-das6033",
 820                 .ai_se_chans    = 64,
 821                 .ai_bits        = 16,
 822                 .ai_speed       = 10000,
 823                 .ao_nchan       = 0,
 824                 .layout         = LAYOUT_60XX,
 825                 .ai_range_table = &ai_ranges_6030,
 826                 .ai_fifo        = &ai_fifo_60xx,
 827                 .has_8255       = 0,
 828         },
 829         [BOARD_PCIDAS6034] = {
 830                 .name           = "pci-das6034",
 831                 .ai_se_chans    = 16,
 832                 .ai_bits        = 16,
 833                 .ai_speed       = 5000,
 834                 .ao_nchan       = 0,
 835                 .ao_scan_speed  = 0,
 836                 .layout         = LAYOUT_60XX,
 837                 .ai_range_table = &ai_ranges_60xx,
 838                 .ai_fifo        = &ai_fifo_60xx,
 839                 .has_8255       = 0,
 840         },
 841         [BOARD_PCIDAS6035] = {
 842                 .name           = "pci-das6035",
 843                 .ai_se_chans    = 16,
 844                 .ai_bits        = 16,
 845                 .ai_speed       = 5000,
 846                 .ao_nchan       = 2,
 847                 .ao_bits        = 12,
 848                 .ao_scan_speed  = 100000,
 849                 .layout         = LAYOUT_60XX,
 850                 .ai_range_table = &ai_ranges_60xx,
 851                 .ao_range_table = &range_bipolar10,
 852                 .ao_range_code  = ao_range_code_60xx,
 853                 .ai_fifo        = &ai_fifo_60xx,
 854                 .has_8255       = 0,
 855         },
 856         [BOARD_PCIDAS6036] = {
 857                 .name           = "pci-das6036",
 858                 .ai_se_chans    = 16,
 859                 .ai_bits        = 16,
 860                 .ai_speed       = 5000,
 861                 .ao_nchan       = 2,
 862                 .ao_bits        = 16,
 863                 .ao_scan_speed  = 100000,
 864                 .layout         = LAYOUT_60XX,
 865                 .ai_range_table = &ai_ranges_60xx,
 866                 .ao_range_table = &range_bipolar10,
 867                 .ao_range_code  = ao_range_code_60xx,
 868                 .ai_fifo        = &ai_fifo_60xx,
 869                 .has_8255       = 0,
 870         },
 871         [BOARD_PCIDAS6040] = {
 872                 .name           = "pci-das6040",
 873                 .ai_se_chans    = 16,
 874                 .ai_bits        = 12,
 875                 .ai_speed       = 2000,
 876                 .ao_nchan       = 2,
 877                 .ao_bits        = 12,
 878                 .ao_scan_speed  = 1000,
 879                 .layout         = LAYOUT_60XX,
 880                 .ai_range_table = &ai_ranges_6052,
 881                 .ao_range_table = &ao_ranges_6030,
 882                 .ao_range_code  = ao_range_code_6030,
 883                 .ai_fifo        = &ai_fifo_60xx,
 884                 .has_8255       = 0,
 885         },
 886         [BOARD_PCIDAS6052] = {
 887                 .name           = "pci-das6052",
 888                 .ai_se_chans    = 16,
 889                 .ai_bits        = 16,
 890                 .ai_speed       = 3333,
 891                 .ao_nchan       = 2,
 892                 .ao_bits        = 16,
 893                 .ao_scan_speed  = 3333,
 894                 .layout         = LAYOUT_60XX,
 895                 .ai_range_table = &ai_ranges_6052,
 896                 .ao_range_table = &ao_ranges_6030,
 897                 .ao_range_code  = ao_range_code_6030,
 898                 .ai_fifo        = &ai_fifo_60xx,
 899                 .has_8255       = 0,
 900         },
 901         [BOARD_PCIDAS6070] = {
 902                 .name           = "pci-das6070",
 903                 .ai_se_chans    = 16,
 904                 .ai_bits        = 12,
 905                 .ai_speed       = 800,
 906                 .ao_nchan       = 2,
 907                 .ao_bits        = 12,
 908                 .ao_scan_speed  = 1000,
 909                 .layout         = LAYOUT_60XX,
 910                 .ai_range_table = &ai_ranges_6052,
 911                 .ao_range_table = &ao_ranges_6030,
 912                 .ao_range_code  = ao_range_code_6030,
 913                 .ai_fifo        = &ai_fifo_60xx,
 914                 .has_8255       = 0,
 915         },
 916         [BOARD_PCIDAS6071] = {
 917                 .name           = "pci-das6071",
 918                 .ai_se_chans    = 64,
 919                 .ai_bits        = 12,
 920                 .ai_speed       = 800,
 921                 .ao_nchan       = 2,
 922                 .ao_bits        = 12,
 923                 .ao_scan_speed  = 1000,
 924                 .layout         = LAYOUT_60XX,
 925                 .ai_range_table = &ai_ranges_6052,
 926                 .ao_range_table = &ao_ranges_6030,
 927                 .ao_range_code  = ao_range_code_6030,
 928                 .ai_fifo        = &ai_fifo_60xx,
 929                 .has_8255       = 0,
 930         },
 931         [BOARD_PCIDAS4020_12] = {
 932                 .name           = "pci-das4020/12",
 933                 .ai_se_chans    = 4,
 934                 .ai_bits        = 12,
 935                 .ai_speed       = 50,
 936                 .ao_bits        = 12,
 937                 .ao_nchan       = 2,
 938                 .ao_scan_speed  = 0,    /*  no hardware pacing on ao */
 939                 .layout         = LAYOUT_4020,
 940                 .ai_range_table = &ai_ranges_4020,
 941                 .ao_range_table = &ao_ranges_4020,
 942                 .ao_range_code  = ao_range_code_4020,
 943                 .ai_fifo        = &ai_fifo_4020,
 944                 .has_8255       = 1,
 945         },
 946 #if 0
 947         /*
 948          * The device id for these boards is unknown
 949          */
 950
 951         [BOARD_PCIDAS6402_16_JR] = {
 952                 .name           = "pci-das6402/16/jr",
 953                 .ai_se_chans    = 64,
 954                 .ai_bits        = 16,
 955                 .ai_speed       = 5000,
 956                 .ao_nchan       = 0,
 957                 .ao_scan_speed  = 10000,
 958                 .layout         = LAYOUT_64XX,
 959                 .ai_range_table = &ai_ranges_64xx,
 960                 .ai_fifo        = ai_fifo_64xx,
 961                 .has_8255       = 1,
 962         },
 963         [BOARD_PCIDAS64_M1_16_JR] = {
 964                 .name           = "pci-das64/m1/16/jr",
 965                 .ai_se_chans    = 64,
 966                 .ai_bits        = 16,
 967                 .ai_speed       = 1000,
 968                 .ao_nchan       = 0,
 969                 .ao_scan_speed  = 10000,
 970                 .layout         = LAYOUT_64XX,
 971                 .ai_range_table = &ai_ranges_64xx,
 972                 .ai_fifo        = ai_fifo_64xx,
 973                 .has_8255       = 1,
 974         },
 975         [BOARD_PCIDAS64_M2_16_JR] = {
 976                 .name = "pci-das64/m2/16/jr",
 977                 .ai_se_chans    = 64,
 978                 .ai_bits        = 16,
 979                 .ai_speed       = 500,
 980                 .ao_nchan       = 0,
 981                 .ao_scan_speed  = 10000,
 982                 .layout         = LAYOUT_64XX,
 983                 .ai_range_table = &ai_ranges_64xx,
 984                 .ai_fifo        = ai_fifo_64xx,
 985                 .has_8255       = 1,
 986         },
 987         [BOARD_PCIDAS64_M3_16_JR] = {
 988                 .name           = "pci-das64/m3/16/jr",
 989                 .ai_se_chans    = 64,
 990                 .ai_bits        = 16,
 991                 .ai_speed       = 333,
 992                 .ao_nchan       = 0,
 993                 .ao_scan_speed  = 10000,
 994                 .layout         = LAYOUT_64XX,
 995                 .ai_range_table = &ai_ranges_64xx,
 996                 .ai_fifo        = ai_fifo_64xx,
 997                 .has_8255       = 1,
 998         },
 999         [BOARD_PCIDAS64_M1_14] = {
1000                 .name           = "pci-das64/m1/14",
1001                 .ai_se_chans    = 64,
1002                 .ai_bits        = 14,
1003                 .ai_speed       = 1000,
1004                 .ao_nchan       = 2,
1005                 .ao_scan_speed  = 10000,
1006                 .layout         = LAYOUT_64XX,
1007                 .ai_range_table = &ai_ranges_64xx,
1008                 .ai_fifo        = ai_fifo_64xx,
1009                 .has_8255       = 1,
1010         },
1011         [BOARD_PCIDAS64_M2_14] = {
1012                 .name           = "pci-das64/m2/14",
1013                 .ai_se_chans    = 64,
1014                 .ai_bits        = 14,
1015                 .ai_speed       = 500,
1016                 .ao_nchan       = 2,
1017                 .ao_scan_speed  = 10000,
1018                 .layout         = LAYOUT_64XX,
1019                 .ai_range_table = &ai_ranges_64xx,
1020                 .ai_fifo        = ai_fifo_64xx,
1021                 .has_8255       = 1,
1022         },
1023         [BOARD_PCIDAS64_M3_14] = {
1024                 .name           = "pci-das64/m3/14",
1025                 .ai_se_chans    = 64,
1026                 .ai_bits        = 14,
1027                 .ai_speed       = 333,
1028                 .ao_nchan       = 2,
1029                 .ao_scan_speed  = 10000,
1030                 .layout         = LAYOUT_64XX,
1031                 .ai_range_table = &ai_ranges_64xx,
1032                 .ai_fifo        = ai_fifo_64xx,
1033                 .has_8255       = 1,
1034         },
1035 #endif
1036 };
1037
1038 static inline unsigned short se_diff_bit_6xxx(struct comedi_device *dev,
1039                                               int use_differential)
1040 {
1041         const struct pcidas64_board *thisboard = dev->board_ptr;
1042
1043         if ((thisboard->layout == LAYOUT_64XX && !use_differential) ||
1044             (thisboard->layout == LAYOUT_60XX && use_differential))
1045                 return ADC_SE_DIFF_BIT;
1046
1047         return 0;
1048 }
1049
1050 struct ext_clock_info {
1051         /*  master clock divisor to use for scans with external master clock */
1052         unsigned int divisor;
1053         /*  chanspec for master clock input when used as scan begin src */
1054         unsigned int chanspec;
1055 };
1056
1057 /* this structure is for data unique to this hardware driver. */
1058 struct pcidas64_private {
1059         /*  base addresses (physical) */
1060         resource_size_t main_phys_iobase;
1061         resource_size_t dio_counter_phys_iobase;
1062         /*  base addresses (ioremapped) */
1063         void __iomem *plx9080_iobase;
1064         void __iomem *main_iobase;
1065         /*  local address (used by dma controller) */
1066         uint32_t local0_iobase;
1067         uint32_t local1_iobase;
1068         /*  dma buffers for analog input */
1069         uint16_t *ai_buffer[MAX_AI_DMA_RING_COUNT];
1070         /*  physical addresses of ai dma buffers */
1071         dma_addr_t ai_buffer_bus_addr[MAX_AI_DMA_RING_COUNT];
1072         /*  array of ai dma descriptors read by plx9080,
1073          *  allocated to get proper alignment */
1074         struct plx_dma_desc *ai_dma_desc;
1075         /*  physical address of ai dma descriptor array */
1076         dma_addr_t ai_dma_desc_bus_addr;
1077         /*  index of the ai dma descriptor/buffer
1078          *  that is currently being used */
1079         unsigned int ai_dma_index;
1080         /*  dma buffers for analog output */
1081         uint16_t *ao_buffer[AO_DMA_RING_COUNT];
1082         /*  physical addresses of ao dma buffers */
1083         dma_addr_t ao_buffer_bus_addr[AO_DMA_RING_COUNT];
1084         struct plx_dma_desc *ao_dma_desc;
1085         dma_addr_t ao_dma_desc_bus_addr;
1086         /*  keeps track of buffer where the next ao sample should go */
1087         unsigned int ao_dma_index;
1088         unsigned int hw_revision;       /*  stc chip hardware revision number */
1089         /*  last bits sent to INTR_ENABLE_REG register */
1090         unsigned int intr_enable_bits;
1091         /*  last bits sent to ADC_CONTROL1_REG register */
1092         uint16_t adc_control1_bits;
1093         /*  last bits sent to FIFO_SIZE_REG register */
1094         uint16_t fifo_size_bits;
1095         /*  last bits sent to HW_CONFIG_REG register */
1096         uint16_t hw_config_bits;
1097         uint16_t dac_control1_bits;
1098         /*  last bits written to plx9080 control register */
1099         uint32_t plx_control_bits;
1100         /*  last bits written to plx interrupt control and status register */
1101         uint32_t plx_intcsr_bits;
1102         /*  index of calibration source readable through ai ch0 */
1103         int calibration_source;
1104         /*  bits written to i2c calibration/range register */
1105         uint8_t i2c_cal_range_bits;
1106         /*  configure digital triggers to trigger on falling edge */
1107         unsigned int ext_trig_falling;
1108         short ai_cmd_running;
1109         unsigned int ai_fifo_segment_length;
1110         struct ext_clock_info ext_clock;
1111         unsigned short ao_bounce_buffer[DAC_FIFO_SIZE];
1112 };
1113
1114 static unsigned int ai_range_bits_6xxx(const struct comedi_device *dev,
1115                                        unsigned int range_index)
1116 {
1117         const struct pcidas64_board *thisboard = dev->board_ptr;
1118         const struct comedi_krange *range =
1119                 &thisboard->ai_range_table->range[range_index];
1120         unsigned int bits = 0;
1121
1122         switch (range->max) {
1123         case 10000000:
1124                 bits = 0x000;
1125                 break;
1126         case 5000000:
1127                 bits = 0x100;
1128                 break;
1129         case 2000000:
1130         case 2500000:
1131                 bits = 0x200;
1132                 break;
1133         case 1000000:
1134         case 1250000:
1135                 bits = 0x300;
1136                 break;
1137         case 500000:
1138                 bits = 0x400;
1139                 break;
1140         case 200000:
1141         case 250000:
1142                 bits = 0x500;
1143                 break;
1144         case 100000:
1145                 bits = 0x600;
1146                 break;
1147         case 50000:
1148                 bits = 0x700;
1149                 break;
1150         default:
1151                 dev_err(dev->class_dev, "bug! in %s\n", __func__);
1152                 break;
1153         }
1154         if (range->min == 0)
1155                 bits += 0x900;
1156         return bits;
1157 }
1158
1159 static unsigned int hw_revision(const struct comedi_device *dev,
1160                                 uint16_t hw_status_bits)
1161 {
1162         const struct pcidas64_board *thisboard = dev->board_ptr;
1163
1164         if (thisboard->layout == LAYOUT_4020)
1165                 return (hw_status_bits >> 13) & 0x7;
1166
1167         return (hw_status_bits >> 12) & 0xf;
1168 }
1169
1170 static void set_dac_range_bits(struct comedi_device *dev,
1171                                uint16_t *bits, unsigned int channel,
1172                                unsigned int range)
1173 {
1174         const struct pcidas64_board *thisboard = dev->board_ptr;
1175         unsigned int code = thisboard->ao_range_code[range];
1176
1177         if (channel > 1)
1178                 dev_err(dev->class_dev, "bug! bad channel?\n");
1179         if (code & ~0x3)
1180                 dev_err(dev->class_dev, "bug! bad range code?\n");
1181
1182         *bits &= ~(0x3 << (2 * channel));
1183         *bits |= code << (2 * channel);
1184 };
1185
1186 static inline int ao_cmd_is_supported(const struct pcidas64_board *board)
1187 {
1188         return board->ao_nchan && board->layout != LAYOUT_4020;
1189 }
1190
1191 static void abort_dma(struct comedi_device *dev, unsigned int channel)
1192 {
1193         struct pcidas64_private *devpriv = dev->private;
1194         unsigned long flags;
1195
1196         /*  spinlock for plx dma control/status reg */
1197         spin_lock_irqsave(&dev->spinlock, flags);
1198
1199         plx9080_abort_dma(devpriv->plx9080_iobase, channel);
1200
1201         spin_unlock_irqrestore(&dev->spinlock, flags);
1202 }
1203
1204 static void disable_plx_interrupts(struct comedi_device *dev)
1205 {
1206         struct pcidas64_private *devpriv = dev->private;
1207
1208         devpriv->plx_intcsr_bits = 0;
1209         writel(devpriv->plx_intcsr_bits,
1210                devpriv->plx9080_iobase + PLX_INTRCS_REG);
1211 }
1212
1213 static void disable_ai_interrupts(struct comedi_device *dev)
1214 {
1215         struct pcidas64_private *devpriv = dev->private;
1216         unsigned long flags;
1217
1218         spin_lock_irqsave(&dev->spinlock, flags);
1219         devpriv->intr_enable_bits &=
1220                 ~EN_ADC_INTR_SRC_BIT & ~EN_ADC_DONE_INTR_BIT &
1221                 ~EN_ADC_ACTIVE_INTR_BIT & ~EN_ADC_STOP_INTR_BIT &
1222                 ~EN_ADC_OVERRUN_BIT & ~ADC_INTR_SRC_MASK;
1223         writew(devpriv->intr_enable_bits,
1224                devpriv->main_iobase + INTR_ENABLE_REG);
1225         spin_unlock_irqrestore(&dev->spinlock, flags);
1226 }
1227
1228 static void enable_ai_interrupts(struct comedi_device *dev,
1229                                  const struct comedi_cmd *cmd)
1230 {
1231         const struct pcidas64_board *thisboard = dev->board_ptr;
1232         struct pcidas64_private *devpriv = dev->private;
1233         uint32_t bits;
1234         unsigned long flags;
1235
1236         bits = EN_ADC_OVERRUN_BIT | EN_ADC_DONE_INTR_BIT |
1237                EN_ADC_ACTIVE_INTR_BIT | EN_ADC_STOP_INTR_BIT;
1238         /*  Use pio transfer and interrupt on end of conversion
1239          *  if CMDF_WAKE_EOS flag is set. */
1240         if (cmd->flags & CMDF_WAKE_EOS) {
1241                 /*  4020 doesn't support pio transfers except for fifo dregs */
1242                 if (thisboard->layout != LAYOUT_4020)
1243                         bits |= ADC_INTR_EOSCAN_BITS | EN_ADC_INTR_SRC_BIT;
1244         }
1245         spin_lock_irqsave(&dev->spinlock, flags);
1246         devpriv->intr_enable_bits |= bits;
1247         writew(devpriv->intr_enable_bits,
1248                devpriv->main_iobase + INTR_ENABLE_REG);
1249         spin_unlock_irqrestore(&dev->spinlock, flags);
1250 }
1251
1252 /* initialize plx9080 chip */
1253 static void init_plx9080(struct comedi_device *dev)
1254 {
1255         const struct pcidas64_board *thisboard = dev->board_ptr;
1256         struct pcidas64_private *devpriv = dev->private;
1257         uint32_t bits;
1258         void __iomem *plx_iobase = devpriv->plx9080_iobase;
1259
1260         devpriv->plx_control_bits =
1261                 readl(devpriv->plx9080_iobase + PLX_CONTROL_REG);
1262
1263 #ifdef __BIG_ENDIAN
1264         bits = BIGEND_DMA0 | BIGEND_DMA1;
1265 #else
1266         bits = 0;
1267 #endif
1268         writel(bits, devpriv->plx9080_iobase + PLX_BIGEND_REG);
1269
1270         disable_plx_interrupts(dev);
1271
1272         abort_dma(dev, 0);
1273         abort_dma(dev, 1);
1274
1275         /*  configure dma0 mode */
1276         bits = 0;
1277         /*  enable ready input, not sure if this is necessary */
1278         bits |= PLX_DMA_EN_READYIN_BIT;
1279         /*  enable bterm, not sure if this is necessary */
1280         bits |= PLX_EN_BTERM_BIT;
1281         /*  enable dma chaining */
1282         bits |= PLX_EN_CHAIN_BIT;
1283         /*  enable interrupt on dma done
1284          *  (probably don't need this, since chain never finishes) */
1285         bits |= PLX_EN_DMA_DONE_INTR_BIT;
1286         /*  don't increment local address during transfers
1287          *  (we are transferring from a fixed fifo register) */
1288         bits |= PLX_LOCAL_ADDR_CONST_BIT;
1289         /*  route dma interrupt to pci bus */
1290         bits |= PLX_DMA_INTR_PCI_BIT;
1291         /*  enable demand mode */
1292         bits |= PLX_DEMAND_MODE_BIT;
1293         /*  enable local burst mode */
1294         bits |= PLX_DMA_LOCAL_BURST_EN_BIT;
1295         /*  4020 uses 32 bit dma */
1296         if (thisboard->layout == LAYOUT_4020)
1297                 bits |= PLX_LOCAL_BUS_32_WIDE_BITS;
1298         else            /*  localspace0 bus is 16 bits wide */
1299                 bits |= PLX_LOCAL_BUS_16_WIDE_BITS;
1300         writel(bits, plx_iobase + PLX_DMA1_MODE_REG);
1301         if (ao_cmd_is_supported(thisboard))
1302                 writel(bits, plx_iobase + PLX_DMA0_MODE_REG);
1303
1304         /*  enable interrupts on plx 9080 */
1305         devpriv->plx_intcsr_bits |=
1306             ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE |
1307             ICS_DMA0_E | ICS_DMA1_E;
1308         writel(devpriv->plx_intcsr_bits,
1309                devpriv->plx9080_iobase + PLX_INTRCS_REG);
1310 }
1311
1312 static void disable_ai_pacing(struct comedi_device *dev)
1313 {
1314         struct pcidas64_private *devpriv = dev->private;
1315         unsigned long flags;
1316
1317         disable_ai_interrupts(dev);
1318
1319         spin_lock_irqsave(&dev->spinlock, flags);
1320         devpriv->adc_control1_bits &= ~ADC_SW_GATE_BIT;
1321         writew(devpriv->adc_control1_bits,
1322                devpriv->main_iobase + ADC_CONTROL1_REG);
1323         spin_unlock_irqrestore(&dev->spinlock, flags);
1324
1325         /* disable pacing, triggering, etc */
1326         writew(ADC_DMA_DISABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT,
1327                devpriv->main_iobase + ADC_CONTROL0_REG);
1328 }
1329
1330 static int set_ai_fifo_segment_length(struct comedi_device *dev,
1331                                       unsigned int num_entries)
1332 {
1333         const struct pcidas64_board *thisboard = dev->board_ptr;
1334         struct pcidas64_private *devpriv = dev->private;
1335         static const int increment_size = 0x100;
1336         const struct hw_fifo_info *const fifo = thisboard->ai_fifo;
1337         unsigned int num_increments;
1338         uint16_t bits;
1339
1340         if (num_entries < increment_size)
1341                 num_entries = increment_size;
1342         if (num_entries > fifo->max_segment_length)
1343                 num_entries = fifo->max_segment_length;
1344
1345         /*  1 == 256 entries, 2 == 512 entries, etc */
1346         num_increments = (num_entries + increment_size / 2) / increment_size;
1347
1348         bits = (~(num_increments - 1)) & fifo->fifo_size_reg_mask;
1349         devpriv->fifo_size_bits &= ~fifo->fifo_size_reg_mask;
1350         devpriv->fifo_size_bits |= bits;
1351         writew(devpriv->fifo_size_bits,
1352                devpriv->main_iobase + FIFO_SIZE_REG);
1353
1354         devpriv->ai_fifo_segment_length = num_increments * increment_size;
1355
1356         return devpriv->ai_fifo_segment_length;
1357 }
1358
1359 /* adjusts the size of hardware fifo (which determines block size for dma xfers) */
1360 static int set_ai_fifo_size(struct comedi_device *dev, unsigned int num_samples)
1361 {
1362         const struct pcidas64_board *thisboard = dev->board_ptr;
1363         unsigned int num_fifo_entries;
1364         int retval;
1365         const struct hw_fifo_info *const fifo = thisboard->ai_fifo;
1366
1367         num_fifo_entries = num_samples / fifo->sample_packing_ratio;
1368
1369         retval = set_ai_fifo_segment_length(dev,
1370                                             num_fifo_entries /
1371                                             fifo->num_segments);
1372         if (retval < 0)
1373                 return retval;
1374
1375         num_samples = retval * fifo->num_segments * fifo->sample_packing_ratio;
1376
1377         return num_samples;
1378 }
1379
1380 /* query length of fifo */
1381 static unsigned int ai_fifo_size(struct comedi_device *dev)
1382 {
1383         const struct pcidas64_board *thisboard = dev->board_ptr;
1384         struct pcidas64_private *devpriv = dev->private;
1385
1386         return devpriv->ai_fifo_segment_length *
1387                thisboard->ai_fifo->num_segments *
1388                thisboard->ai_fifo->sample_packing_ratio;
1389 }
1390
1391 static void init_stc_registers(struct comedi_device *dev)
1392 {
1393         const struct pcidas64_board *thisboard = dev->board_ptr;
1394         struct pcidas64_private *devpriv = dev->private;
1395         uint16_t bits;
1396         unsigned long flags;
1397
1398         spin_lock_irqsave(&dev->spinlock, flags);
1399
1400         /*  bit should be set for 6025,
1401          *  although docs say boards with <= 16 chans should be cleared XXX */
1402         if (1)
1403                 devpriv->adc_control1_bits |= ADC_QUEUE_CONFIG_BIT;
1404         writew(devpriv->adc_control1_bits,
1405                devpriv->main_iobase + ADC_CONTROL1_REG);
1406
1407         /*  6402/16 manual says this register must be initialized to 0xff? */
1408         writew(0xff, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
1409
1410         bits = SLOW_DAC_BIT | DMA_CH_SELECT_BIT;
1411         if (thisboard->layout == LAYOUT_4020)
1412                 bits |= INTERNAL_CLOCK_4020_BITS;
1413         devpriv->hw_config_bits |= bits;
1414         writew(devpriv->hw_config_bits,
1415                devpriv->main_iobase + HW_CONFIG_REG);
1416
1417         writew(0, devpriv->main_iobase + DAQ_SYNC_REG);
1418         writew(0, devpriv->main_iobase + CALIBRATION_REG);
1419
1420         spin_unlock_irqrestore(&dev->spinlock, flags);
1421
1422         /*  set fifos to maximum size */
1423         devpriv->fifo_size_bits |= DAC_FIFO_BITS;
1424         set_ai_fifo_segment_length(dev,
1425                                    thisboard->ai_fifo->max_segment_length);
1426
1427         devpriv->dac_control1_bits = DAC_OUTPUT_ENABLE_BIT;
1428         devpriv->intr_enable_bits =
1429                 /* EN_DAC_INTR_SRC_BIT | DAC_INTR_QEMPTY_BITS | */
1430                 EN_DAC_DONE_INTR_BIT | EN_DAC_UNDERRUN_BIT;
1431         writew(devpriv->intr_enable_bits,
1432                devpriv->main_iobase + INTR_ENABLE_REG);
1433
1434         disable_ai_pacing(dev);
1435 };
1436
1437 static int alloc_and_init_dma_members(struct comedi_device *dev)
1438 {
1439         const struct pcidas64_board *thisboard = dev->board_ptr;
1440         struct pci_dev *pcidev = comedi_to_pci_dev(dev);
1441         struct pcidas64_private *devpriv = dev->private;
1442         int i;
1443
1444         /*  allocate pci dma buffers */
1445         for (i = 0; i < ai_dma_ring_count(thisboard); i++) {
1446                 devpriv->ai_buffer[i] =
1447                         pci_alloc_consistent(pcidev, DMA_BUFFER_SIZE,
1448                                              &devpriv->ai_buffer_bus_addr[i]);
1449                 if (devpriv->ai_buffer[i] == NULL)
1450                         return -ENOMEM;
1451
1452         }
1453         for (i = 0; i < AO_DMA_RING_COUNT; i++) {
1454                 if (ao_cmd_is_supported(thisboard)) {
1455                         devpriv->ao_buffer[i] =
1456                                 pci_alloc_consistent(pcidev, DMA_BUFFER_SIZE,
1457                                                      &devpriv->
1458                                                       ao_buffer_bus_addr[i]);
1459                         if (devpriv->ao_buffer[i] == NULL)
1460                                 return -ENOMEM;
1461
1462                 }
1463         }
1464         /*  allocate dma descriptors */
1465         devpriv->ai_dma_desc =
1466                 pci_alloc_consistent(pcidev, sizeof(struct plx_dma_desc) *
1467                                      ai_dma_ring_count(thisboard),
1468                                      &devpriv->ai_dma_desc_bus_addr);
1469         if (devpriv->ai_dma_desc == NULL)
1470                 return -ENOMEM;
1471
1472         if (ao_cmd_is_supported(thisboard)) {
1473                 devpriv->ao_dma_desc =
1474                         pci_alloc_consistent(pcidev,
1475                                              sizeof(struct plx_dma_desc) *
1476                                              AO_DMA_RING_COUNT,
1477                                              &devpriv->ao_dma_desc_bus_addr);
1478                 if (devpriv->ao_dma_desc == NULL)
1479                         return -ENOMEM;
1480         }
1481         /*  initialize dma descriptors */
1482         for (i = 0; i < ai_dma_ring_count(thisboard); i++) {
1483                 devpriv->ai_dma_desc[i].pci_start_addr =
1484                         cpu_to_le32(devpriv->ai_buffer_bus_addr[i]);
1485                 if (thisboard->layout == LAYOUT_4020)
1486                         devpriv->ai_dma_desc[i].local_start_addr =
1487                                 cpu_to_le32(devpriv->local1_iobase +
1488                                             ADC_FIFO_REG);
1489                 else
1490                         devpriv->ai_dma_desc[i].local_start_addr =
1491                                 cpu_to_le32(devpriv->local0_iobase +
1492                                             ADC_FIFO_REG);
1493                 devpriv->ai_dma_desc[i].transfer_size = cpu_to_le32(0);
1494                 devpriv->ai_dma_desc[i].next =
1495                         cpu_to_le32((devpriv->ai_dma_desc_bus_addr +
1496                                      ((i + 1) % ai_dma_ring_count(thisboard)) *
1497                                      sizeof(devpriv->ai_dma_desc[0])) |
1498                                     PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT |
1499                                     PLX_XFER_LOCAL_TO_PCI);
1500         }
1501         if (ao_cmd_is_supported(thisboard)) {
1502                 for (i = 0; i < AO_DMA_RING_COUNT; i++) {
1503                         devpriv->ao_dma_desc[i].pci_start_addr =
1504                                 cpu_to_le32(devpriv->ao_buffer_bus_addr[i]);
1505                         devpriv->ao_dma_desc[i].local_start_addr =
1506                                 cpu_to_le32(devpriv->local0_iobase +
1507                                             DAC_FIFO_REG);
1508                         devpriv->ao_dma_desc[i].transfer_size = cpu_to_le32(0);
1509                         devpriv->ao_dma_desc[i].next =
1510                                 cpu_to_le32((devpriv->ao_dma_desc_bus_addr +
1511                                              ((i + 1) % (AO_DMA_RING_COUNT)) *
1512                                              sizeof(devpriv->ao_dma_desc[0])) |
1513                                             PLX_DESC_IN_PCI_BIT |
1514                                             PLX_INTR_TERM_COUNT);
1515                 }
1516         }
1517         return 0;
1518 }
1519
1520 static void cb_pcidas64_free_dma(struct comedi_device *dev)
1521 {
1522         const struct pcidas64_board *thisboard = dev->board_ptr;
1523         struct pci_dev *pcidev = comedi_to_pci_dev(dev);
1524         struct pcidas64_private *devpriv = dev->private;
1525         int i;
1526
1527         if (!devpriv)
1528                 return;
1529
1530         /* free pci dma buffers */
1531         for (i = 0; i < ai_dma_ring_count(thisboard); i++) {
1532                 if (devpriv->ai_buffer[i])
1533                         pci_free_consistent(pcidev,
1534                                             DMA_BUFFER_SIZE,
1535                                             devpriv->ai_buffer[i],
1536                                             devpriv->ai_buffer_bus_addr[i]);
1537         }
1538         for (i = 0; i < AO_DMA_RING_COUNT; i++) {
1539                 if (devpriv->ao_buffer[i])
1540                         pci_free_consistent(pcidev,
1541                                             DMA_BUFFER_SIZE,
1542                                             devpriv->ao_buffer[i],
1543                                             devpriv->ao_buffer_bus_addr[i]);
1544         }
1545         /* free dma descriptors */
1546         if (devpriv->ai_dma_desc)
1547                 pci_free_consistent(pcidev,
1548                                     sizeof(struct plx_dma_desc) *
1549                                     ai_dma_ring_count(thisboard),
1550                                     devpriv->ai_dma_desc,
1551                                     devpriv->ai_dma_desc_bus_addr);
1552         if (devpriv->ao_dma_desc)
1553                 pci_free_consistent(pcidev,
1554                                     sizeof(struct plx_dma_desc) *
1555                                     AO_DMA_RING_COUNT,
1556                                     devpriv->ao_dma_desc,
1557                                     devpriv->ao_dma_desc_bus_addr);
1558 }
1559
1560 static inline void warn_external_queue(struct comedi_device *dev)
1561 {
1562         dev_err(dev->class_dev,
1563                 "AO command and AI external channel queue cannot be used simultaneously\n");
1564         dev_err(dev->class_dev,
1565                 "Use internal AI channel queue (channels must be consecutive and use same range/aref)\n");
1566 }
1567
1568 /* Their i2c requires a huge delay on setting clock or data high for some reason */
1569 static const int i2c_high_udelay = 1000;
1570 static const int i2c_low_udelay = 10;
1571
1572 /* set i2c data line high or low */
1573 static void i2c_set_sda(struct comedi_device *dev, int state)
1574 {
1575         struct pcidas64_private *devpriv = dev->private;
1576         static const int data_bit = CTL_EE_W;
1577         void __iomem *plx_control_addr = devpriv->plx9080_iobase +
1578                                          PLX_CONTROL_REG;
1579
1580         if (state) {
1581                 /*  set data line high */
1582                 devpriv->plx_control_bits &= ~data_bit;
1583                 writel(devpriv->plx_control_bits, plx_control_addr);
1584                 udelay(i2c_high_udelay);
1585         } else {                /*  set data line low */
1586
1587                 devpriv->plx_control_bits |= data_bit;
1588                 writel(devpriv->plx_control_bits, plx_control_addr);
1589                 udelay(i2c_low_udelay);
1590         }
1591 }
1592
1593 /* set i2c clock line high or low */
1594 static void i2c_set_scl(struct comedi_device *dev, int state)
1595 {
1596         struct pcidas64_private *devpriv = dev->private;
1597         static const int clock_bit = CTL_USERO;
1598         void __iomem *plx_control_addr = devpriv->plx9080_iobase +
1599                                          PLX_CONTROL_REG;
1600
1601         if (state) {
1602                 /*  set clock line high */
1603                 devpriv->plx_control_bits &= ~clock_bit;
1604                 writel(devpriv->plx_control_bits, plx_control_addr);
1605                 udelay(i2c_high_udelay);
1606         } else {                /*  set clock line low */
1607
1608                 devpriv->plx_control_bits |= clock_bit;
1609                 writel(devpriv->plx_control_bits, plx_control_addr);
1610                 udelay(i2c_low_udelay);
1611         }
1612 }
1613
1614 static void i2c_write_byte(struct comedi_device *dev, uint8_t byte)
1615 {
1616         uint8_t bit;
1617         unsigned int num_bits = 8;
1618
1619         for (bit = 1 << (num_bits - 1); bit; bit >>= 1) {
1620                 i2c_set_scl(dev, 0);
1621                 if ((byte & bit))
1622                         i2c_set_sda(dev, 1);
1623                 else
1624                         i2c_set_sda(dev, 0);
1625                 i2c_set_scl(dev, 1);
1626         }
1627 }
1628
1629 /* we can't really read the lines, so fake it */
1630 static int i2c_read_ack(struct comedi_device *dev)
1631 {
1632         i2c_set_scl(dev, 0);
1633         i2c_set_sda(dev, 1);
1634         i2c_set_scl(dev, 1);
1635
1636         return 0;               /*  return fake acknowledge bit */
1637 }
1638
1639 /* send start bit */
1640 static void i2c_start(struct comedi_device *dev)
1641 {
1642         i2c_set_scl(dev, 1);
1643         i2c_set_sda(dev, 1);
1644         i2c_set_sda(dev, 0);
1645 }
1646
1647 /* send stop bit */
1648 static void i2c_stop(struct comedi_device *dev)
1649 {
1650         i2c_set_scl(dev, 0);
1651         i2c_set_sda(dev, 0);
1652         i2c_set_scl(dev, 1);
1653         i2c_set_sda(dev, 1);
1654 }
1655
1656 static void i2c_write(struct comedi_device *dev, unsigned int address,
1657                       const uint8_t *data, unsigned int length)
1658 {
1659         struct pcidas64_private *devpriv = dev->private;
1660         unsigned int i;
1661         uint8_t bitstream;
1662         static const int read_bit = 0x1;
1663
1664         /* XXX need mutex to prevent simultaneous attempts to access
1665          * eeprom and i2c bus */
1666
1667         /*  make sure we dont send anything to eeprom */
1668         devpriv->plx_control_bits &= ~CTL_EE_CS;
1669
1670         i2c_stop(dev);
1671         i2c_start(dev);
1672
1673         /*  send address and write bit */
1674         bitstream = (address << 1) & ~read_bit;
1675         i2c_write_byte(dev, bitstream);
1676
1677         /*  get acknowledge */
1678         if (i2c_read_ack(dev) != 0) {
1679                 dev_err(dev->class_dev, "%s failed: no acknowledge\n",
1680                         __func__);
1681                 i2c_stop(dev);
1682                 return;
1683         }
1684         /*  write data bytes */
1685         for (i = 0; i < length; i++) {
1686                 i2c_write_byte(dev, data[i]);
1687                 if (i2c_read_ack(dev) != 0) {
1688                         dev_err(dev->class_dev, "%s failed: no acknowledge\n",
1689                                 __func__);
1690                         i2c_stop(dev);
1691                         return;
1692                 }
1693         }
1694         i2c_stop(dev);
1695 }
1696
1697 static int cb_pcidas64_ai_eoc(struct comedi_device *dev,
1698                               struct comedi_subdevice *s,
1699                               struct comedi_insn *insn,
1700                               unsigned long context)
1701 {
1702         const struct pcidas64_board *thisboard = dev->board_ptr;
1703         struct pcidas64_private *devpriv = dev->private;
1704         unsigned int status;
1705
1706         status = readw(devpriv->main_iobase + HW_STATUS_REG);
1707         if (thisboard->layout == LAYOUT_4020) {
1708                 status = readw(devpriv->main_iobase + ADC_WRITE_PNTR_REG);
1709                 if (status)
1710                         return 0;
1711         } else {
1712                 if (pipe_full_bits(status))
1713                         return 0;
1714         }
1715         return -EBUSY;
1716 }
1717
1718 static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
1719                     struct comedi_insn *insn, unsigned int *data)
1720 {
1721         const struct pcidas64_board *thisboard = dev->board_ptr;
1722         struct pcidas64_private *devpriv = dev->private;
1723         unsigned int bits = 0, n;
1724         unsigned int channel, range, aref;
1725         unsigned long flags;
1726         int ret;
1727
1728         channel = CR_CHAN(insn->chanspec);
1729         range = CR_RANGE(insn->chanspec);
1730         aref = CR_AREF(insn->chanspec);
1731
1732         /*  disable card's analog input interrupt sources and pacing */
1733         /*  4020 generates dac done interrupts even though they are disabled */
1734         disable_ai_pacing(dev);
1735
1736         spin_lock_irqsave(&dev->spinlock, flags);
1737         if (insn->chanspec & CR_ALT_FILTER)
1738                 devpriv->adc_control1_bits |= ADC_DITHER_BIT;
1739         else
1740                 devpriv->adc_control1_bits &= ~ADC_DITHER_BIT;
1741         writew(devpriv->adc_control1_bits,
1742                devpriv->main_iobase + ADC_CONTROL1_REG);
1743         spin_unlock_irqrestore(&dev->spinlock, flags);
1744
1745         if (thisboard->layout != LAYOUT_4020) {
1746                 /*  use internal queue */
1747                 devpriv->hw_config_bits &= ~EXT_QUEUE_BIT;
1748                 writew(devpriv->hw_config_bits,
1749                        devpriv->main_iobase + HW_CONFIG_REG);
1750
1751                 /*  ALT_SOURCE is internal calibration reference */
1752                 if (insn->chanspec & CR_ALT_SOURCE) {
1753                         unsigned int cal_en_bit;
1754
1755                         if (thisboard->layout == LAYOUT_60XX)
1756                                 cal_en_bit = CAL_EN_60XX_BIT;
1757                         else
1758                                 cal_en_bit = CAL_EN_64XX_BIT;
1759                         /*  select internal reference source to connect
1760                          *  to channel 0 */
1761                         writew(cal_en_bit |
1762                                adc_src_bits(devpriv->calibration_source),
1763                                devpriv->main_iobase + CALIBRATION_REG);
1764                 } else {
1765                         /*  make sure internal calibration source
1766                          *  is turned off */
1767                         writew(0, devpriv->main_iobase + CALIBRATION_REG);
1768                 }
1769                 /*  load internal queue */
1770                 bits = 0;
1771                 /*  set gain */
1772                 bits |= ai_range_bits_6xxx(dev, CR_RANGE(insn->chanspec));
1773                 /*  set single-ended / differential */
1774                 bits |= se_diff_bit_6xxx(dev, aref == AREF_DIFF);
1775                 if (aref == AREF_COMMON)
1776                         bits |= ADC_COMMON_BIT;
1777                 bits |= adc_chan_bits(channel);
1778                 /*  set stop channel */
1779                 writew(adc_chan_bits(channel),
1780                        devpriv->main_iobase + ADC_QUEUE_HIGH_REG);
1781                 /*  set start channel, and rest of settings */
1782                 writew(bits, devpriv->main_iobase + ADC_QUEUE_LOAD_REG);
1783         } else {
1784                 uint8_t old_cal_range_bits = devpriv->i2c_cal_range_bits;
1785
1786                 devpriv->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK;
1787                 if (insn->chanspec & CR_ALT_SOURCE) {
1788                         devpriv->i2c_cal_range_bits |=
1789                                 adc_src_4020_bits(devpriv->calibration_source);
1790                 } else {        /* select BNC inputs */
1791                         devpriv->i2c_cal_range_bits |= adc_src_4020_bits(4);
1792                 }
1793                 /*  select range */
1794                 if (range == 0)
1795                         devpriv->i2c_cal_range_bits |= attenuate_bit(channel);
1796                 else
1797                         devpriv->i2c_cal_range_bits &= ~attenuate_bit(channel);
1798                 /*  update calibration/range i2c register only if necessary,
1799                  *  as it is very slow */
1800                 if (old_cal_range_bits != devpriv->i2c_cal_range_bits) {
1801                         uint8_t i2c_data = devpriv->i2c_cal_range_bits;
1802
1803                         i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data,
1804                                   sizeof(i2c_data));
1805                 }
1806
1807                 /* 4020 manual asks that sample interval register to be set
1808                  * before writing to convert register.
1809                  * Using somewhat arbitrary setting of 4 master clock ticks
1810                  * = 0.1 usec */
1811                 writew(0, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
1812                 writew(2, devpriv->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG);
1813         }
1814
1815         for (n = 0; n < insn->n; n++) {
1816
1817                 /*  clear adc buffer (inside loop for 4020 sake) */
1818                 writew(0, devpriv->main_iobase + ADC_BUFFER_CLEAR_REG);
1819
1820                 /* trigger conversion, bits sent only matter for 4020 */
1821                 writew(adc_convert_chan_4020_bits(CR_CHAN(insn->chanspec)),
1822                        devpriv->main_iobase + ADC_CONVERT_REG);
1823
1824                 /*  wait for data */
1825                 ret = comedi_timeout(dev, s, insn, cb_pcidas64_ai_eoc, 0);
1826                 if (ret)
1827                         return ret;
1828
1829                 if (thisboard->layout == LAYOUT_4020)
1830                         data[n] = readl(dev->mmio + ADC_FIFO_REG) & 0xffff;
1831                 else
1832                         data[n] = readw(devpriv->main_iobase + PIPE1_READ_REG);
1833         }
1834
1835         return n;
1836 }
1837
1838 static int ai_config_calibration_source(struct comedi_device *dev,
1839                                         unsigned int *data)
1840 {
1841         const struct pcidas64_board *thisboard = dev->board_ptr;
1842         struct pcidas64_private *devpriv = dev->private;
1843         unsigned int source = data[1];
1844         int num_calibration_sources;
1845
1846         if (thisboard->layout == LAYOUT_60XX)
1847                 num_calibration_sources = 16;
1848         else
1849                 num_calibration_sources = 8;
1850         if (source >= num_calibration_sources) {
1851                 dev_dbg(dev->class_dev, "invalid calibration source: %i\n",
1852                         source);
1853                 return -EINVAL;
1854         }
1855
1856         devpriv->calibration_source = source;
1857
1858         return 2;
1859 }
1860
1861 static int ai_config_block_size(struct comedi_device *dev, unsigned int *data)
1862 {
1863         const struct pcidas64_board *thisboard = dev->board_ptr;
1864         int fifo_size;
1865         const struct hw_fifo_info *const fifo = thisboard->ai_fifo;
1866         unsigned int block_size, requested_block_size;
1867         int retval;
1868
1869         requested_block_size = data[1];
1870
1871         if (requested_block_size) {
1872                 fifo_size = requested_block_size * fifo->num_segments /
1873                             bytes_in_sample;
1874
1875                 retval = set_ai_fifo_size(dev, fifo_size);
1876                 if (retval < 0)
1877                         return retval;
1878
1879         }
1880
1881         block_size = ai_fifo_size(dev) / fifo->num_segments * bytes_in_sample;
1882
1883         data[1] = block_size;
1884
1885         return 2;
1886 }
1887
1888 static int ai_config_master_clock_4020(struct comedi_device *dev,
1889                                        unsigned int *data)
1890 {
1891         struct pcidas64_private *devpriv = dev->private;
1892         unsigned int divisor = data[4];
1893         int retval = 0;
1894
1895         if (divisor < 2) {
1896                 divisor = 2;
1897                 retval = -EAGAIN;
1898         }
1899
1900         switch (data[1]) {
1901         case COMEDI_EV_SCAN_BEGIN:
1902                 devpriv->ext_clock.divisor = divisor;
1903                 devpriv->ext_clock.chanspec = data[2];
1904                 break;
1905         default:
1906                 return -EINVAL;
1907         }
1908
1909         data[4] = divisor;
1910
1911         return retval ? retval : 5;
1912 }
1913
1914 /* XXX could add support for 60xx series */
1915 static int ai_config_master_clock(struct comedi_device *dev, unsigned int *data)
1916 {
1917         const struct pcidas64_board *thisboard = dev->board_ptr;
1918
1919         switch (thisboard->layout) {
1920         case LAYOUT_4020:
1921                 return ai_config_master_clock_4020(dev, data);
1922         default:
1923                 return -EINVAL;
1924         }
1925
1926         return -EINVAL;
1927 }
1928
1929 static int ai_config_insn(struct comedi_device *dev, struct comedi_subdevice *s,
1930                           struct comedi_insn *insn, unsigned int *data)
1931 {
1932         int id = data[0];
1933
1934         switch (id) {
1935         case INSN_CONFIG_ALT_SOURCE:
1936                 return ai_config_calibration_source(dev, data);
1937         case INSN_CONFIG_BLOCK_SIZE:
1938                 return ai_config_block_size(dev, data);
1939         case INSN_CONFIG_TIMER_1:
1940                 return ai_config_master_clock(dev, data);
1941         default:
1942                 return -EINVAL;
1943         }
1944         return -EINVAL;
1945 }
1946
1947 /* Gets nearest achievable timing given master clock speed, does not
1948  * take into account possible minimum/maximum divisor values.  Used
1949  * by other timing checking functions. */
1950 static unsigned int get_divisor(unsigned int ns, unsigned int flags)
1951 {
1952         unsigned int divisor;
1953
1954         switch (flags & CMDF_ROUND_MASK) {
1955         case CMDF_ROUND_UP:
1956                 divisor = (ns + TIMER_BASE - 1) / TIMER_BASE;
1957                 break;
1958         case CMDF_ROUND_DOWN:
1959                 divisor = ns / TIMER_BASE;
1960                 break;
1961         case CMDF_ROUND_NEAREST:
1962         default:
1963                 divisor = (ns + TIMER_BASE / 2) / TIMER_BASE;
1964                 break;
1965         }
1966         return divisor;
1967 }
1968
1969 /* utility function that rounds desired timing to an achievable time, and
1970  * sets cmd members appropriately.
1971  * adc paces conversions from master clock by dividing by (x + 3) where x is 24 bit number
1972  */
1973 static void check_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
1974 {
1975         const struct pcidas64_board *thisboard = dev->board_ptr;
1976         unsigned int convert_divisor = 0, scan_divisor;
1977         static const int min_convert_divisor = 3;
1978         static const int max_convert_divisor =
1979                 max_counter_value + min_convert_divisor;
1980         static const int min_scan_divisor_4020 = 2;
1981         unsigned long long max_scan_divisor, min_scan_divisor;
1982
1983         if (cmd->convert_src == TRIG_TIMER) {
1984                 if (thisboard->layout == LAYOUT_4020) {
1985                         cmd->convert_arg = 0;
1986                 } else {
1987                         convert_divisor = get_divisor(cmd->convert_arg,
1988                                                       cmd->flags);
1989                         if (convert_divisor > max_convert_divisor)
1990                                 convert_divisor = max_convert_divisor;
1991                         if (convert_divisor < min_convert_divisor)
1992                                 convert_divisor = min_convert_divisor;
1993                         cmd->convert_arg = convert_divisor * TIMER_BASE;
1994                 }
1995         } else if (cmd->convert_src == TRIG_NOW) {
1996                 cmd->convert_arg = 0;
1997         }
1998
1999         if (cmd->scan_begin_src == TRIG_TIMER) {
2000                 scan_divisor = get_divisor(cmd->scan_begin_arg, cmd->flags);
2001                 if (cmd->convert_src == TRIG_TIMER) {
2002                         /*  XXX check for integer overflows */
2003                         min_scan_divisor = convert_divisor * cmd->chanlist_len;
2004                         max_scan_divisor =
2005                                 (convert_divisor * cmd->chanlist_len - 1) +
2006                                 max_counter_value;
2007                 } else {
2008                         min_scan_divisor = min_scan_divisor_4020;
2009                         max_scan_divisor = max_counter_value + min_scan_divisor;
2010                 }
2011                 if (scan_divisor > max_scan_divisor)
2012                         scan_divisor = max_scan_divisor;
2013                 if (scan_divisor < min_scan_divisor)
2014                         scan_divisor = min_scan_divisor;
2015                 cmd->scan_begin_arg = scan_divisor * TIMER_BASE;
2016         }
2017 }
2018
2019 static int cb_pcidas64_ai_check_chanlist(struct comedi_device *dev,
2020                                          struct comedi_subdevice *s,
2021                                          struct comedi_cmd *cmd)
2022 {
2023         const struct pcidas64_board *board = dev->board_ptr;
2024         unsigned int aref0 = CR_AREF(cmd->chanlist[0]);
2025         int i;
2026
2027         for (i = 1; i < cmd->chanlist_len; i++) {
2028                 unsigned int aref = CR_AREF(cmd->chanlist[i]);
2029
2030                 if (aref != aref0) {
2031                         dev_dbg(dev->class_dev,
2032                                 "all elements in chanlist must use the same analog reference\n");
2033                         return -EINVAL;
2034                 }
2035         }
2036
2037         if (board->layout == LAYOUT_4020) {
2038                 unsigned int chan0 = CR_CHAN(cmd->chanlist[0]);
2039
2040                 for (i = 1; i < cmd->chanlist_len; i++) {
2041                         unsigned int chan = CR_CHAN(cmd->chanlist[i]);
2042
2043                         if (chan != (chan0 + i)) {
2044                                 dev_dbg(dev->class_dev,
2045                                         "chanlist must use consecutive channels\n");
2046                                 return -EINVAL;
2047                         }
2048                 }
2049                 if (cmd->chanlist_len == 3) {
2050                         dev_dbg(dev->class_dev,
2051                                 "chanlist cannot be 3 channels long, use 1, 2, or 4 channels\n");
2052                         return -EINVAL;
2053                 }
2054         }
2055
2056         return 0;
2057 }
2058
2059 static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
2060                       struct comedi_cmd *cmd)
2061 {
2062         const struct pcidas64_board *thisboard = dev->board_ptr;
2063         int err = 0;
2064         unsigned int tmp_arg, tmp_arg2;
2065         unsigned int triggers;
2066
2067         /* Step 1 : check if triggers are trivially valid */
2068
2069         err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW | TRIG_EXT);
2070
2071         triggers = TRIG_TIMER;
2072         if (thisboard->layout == LAYOUT_4020)
2073                 triggers |= TRIG_OTHER;
2074         else
2075                 triggers |= TRIG_FOLLOW;
2076         err |= cfc_check_trigger_src(&cmd->scan_begin_src, triggers);
2077
2078         triggers = TRIG_TIMER;
2079         if (thisboard->layout == LAYOUT_4020)
2080                 triggers |= TRIG_NOW;
2081         else
2082                 triggers |= TRIG_EXT;
2083         err |= cfc_check_trigger_src(&cmd->convert_src, triggers);
2084         err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
2085         err |= cfc_check_trigger_src(&cmd->stop_src,
2086                                      TRIG_COUNT | TRIG_EXT | TRIG_NONE);
2087
2088         if (err)
2089                 return 1;
2090
2091         /* Step 2a : make sure trigger sources are unique */
2092
2093         err |= cfc_check_trigger_is_unique(cmd->start_src);
2094         err |= cfc_check_trigger_is_unique(cmd->scan_begin_src);
2095         err |= cfc_check_trigger_is_unique(cmd->convert_src);
2096         err |= cfc_check_trigger_is_unique(cmd->stop_src);
2097
2098         /* Step 2b : and mutually compatible */
2099
2100         if (cmd->convert_src == TRIG_EXT && cmd->scan_begin_src == TRIG_TIMER)
2101                 err |= -EINVAL;
2102
2103         if (err)
2104                 return 2;
2105
2106         /* Step 3: check if arguments are trivially valid */
2107
2108         switch (cmd->start_src) {
2109         case TRIG_NOW:
2110                 err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
2111                 break;
2112         case TRIG_EXT:
2113                 /*
2114                  * start_arg is the CR_CHAN | CR_INVERT of the
2115                  * external trigger.
2116                  */
2117                 break;
2118         }
2119
2120         if (cmd->convert_src == TRIG_TIMER) {
2121                 if (thisboard->layout == LAYOUT_4020) {
2122                         err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
2123                 } else {
2124                         err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
2125                                                          thisboard->ai_speed);
2126                         /* if scans are timed faster than conversion rate allows */
2127                         if (cmd->scan_begin_src == TRIG_TIMER)
2128                                 err |= cfc_check_trigger_arg_min(
2129                                                 &cmd->scan_begin_arg,
2130                                                 cmd->convert_arg *
2131                                                 cmd->chanlist_len);
2132                 }
2133         }
2134
2135         err |= cfc_check_trigger_arg_min(&cmd->chanlist_len, 1);
2136         err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
2137
2138         switch (cmd->stop_src) {
2139         case TRIG_EXT:
2140                 break;
2141         case TRIG_COUNT:
2142                 err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
2143                 break;
2144         case TRIG_NONE:
2145                 err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
2146                 break;
2147         default:
2148                 break;
2149         }
2150
2151         if (err)
2152                 return 3;
2153
2154         /* step 4: fix up any arguments */
2155
2156         if (cmd->convert_src == TRIG_TIMER) {
2157                 tmp_arg = cmd->convert_arg;
2158                 tmp_arg2 = cmd->scan_begin_arg;
2159                 check_adc_timing(dev, cmd);
2160                 if (tmp_arg != cmd->convert_arg)
2161                         err++;
2162                 if (tmp_arg2 != cmd->scan_begin_arg)
2163                         err++;
2164         }
2165
2166         if (err)
2167                 return 4;
2168
2169         /* Step 5: check channel list if it exists */
2170         if (cmd->chanlist && cmd->chanlist_len > 0)
2171                 err |= cb_pcidas64_ai_check_chanlist(dev, s, cmd);
2172
2173         if (err)
2174                 return 5;
2175
2176         return 0;
2177 }
2178
2179 static int use_hw_sample_counter(struct comedi_cmd *cmd)
2180 {
2181 /* disable for now until I work out a race */
2182         return 0;
2183
2184         if (cmd->stop_src == TRIG_COUNT && cmd->stop_arg <= max_counter_value)
2185                 return 1;
2186
2187         return 0;
2188 }
2189
2190 static void setup_sample_counters(struct comedi_device *dev,
2191                                   struct comedi_cmd *cmd)
2192 {
2193         struct pcidas64_private *devpriv = dev->private;
2194
2195         /*  load hardware conversion counter */
2196         if (use_hw_sample_counter(cmd)) {
2197                 writew(cmd->stop_arg & 0xffff,
2198                        devpriv->main_iobase + ADC_COUNT_LOWER_REG);
2199                 writew((cmd->stop_arg >> 16) & 0xff,
2200                        devpriv->main_iobase + ADC_COUNT_UPPER_REG);
2201         } else {
2202                 writew(1, devpriv->main_iobase + ADC_COUNT_LOWER_REG);
2203         }
2204 }
2205
2206 static inline unsigned int dma_transfer_size(struct comedi_device *dev)
2207 {
2208         const struct pcidas64_board *thisboard = dev->board_ptr;
2209         struct pcidas64_private *devpriv = dev->private;
2210         unsigned int num_samples;
2211
2212         num_samples = devpriv->ai_fifo_segment_length *
2213                       thisboard->ai_fifo->sample_packing_ratio;
2214         if (num_samples > DMA_BUFFER_SIZE / sizeof(uint16_t))
2215                 num_samples = DMA_BUFFER_SIZE / sizeof(uint16_t);
2216
2217         return num_samples;
2218 }
2219
2220 static uint32_t ai_convert_counter_6xxx(const struct comedi_device *dev,
2221                                         const struct comedi_cmd *cmd)
2222 {
2223         /*  supposed to load counter with desired divisor minus 3 */
2224         return cmd->convert_arg / TIMER_BASE - 3;
2225 }
2226
2227 static uint32_t ai_scan_counter_6xxx(struct comedi_device *dev,
2228                                      struct comedi_cmd *cmd)
2229 {
2230         uint32_t count;
2231
2232         /*  figure out how long we need to delay at end of scan */
2233         switch (cmd->scan_begin_src) {
2234         case TRIG_TIMER:
2235                 count = (cmd->scan_begin_arg -
2236                          (cmd->convert_arg * (cmd->chanlist_len - 1))) /
2237                         TIMER_BASE;
2238                 break;
2239         case TRIG_FOLLOW:
2240                 count = cmd->convert_arg / TIMER_BASE;
2241                 break;
2242         default:
2243                 return 0;
2244         }
2245         return count - 3;
2246 }
2247
2248 static uint32_t ai_convert_counter_4020(struct comedi_device *dev,
2249                                         struct comedi_cmd *cmd)
2250 {
2251         struct pcidas64_private *devpriv = dev->private;
2252         unsigned int divisor;
2253
2254         switch (cmd->scan_begin_src) {
2255         case TRIG_TIMER:
2256                 divisor = cmd->scan_begin_arg / TIMER_BASE;
2257                 break;
2258         case TRIG_OTHER:
2259                 divisor = devpriv->ext_clock.divisor;
2260                 break;
2261         default:                /*  should never happen */
2262                 dev_err(dev->class_dev, "bug! failed to set ai pacing!\n");
2263                 divisor = 1000;
2264                 break;
2265         }
2266
2267         /*  supposed to load counter with desired divisor minus 2 for 4020 */
2268         return divisor - 2;
2269 }
2270
2271 static void select_master_clock_4020(struct comedi_device *dev,
2272                                      const struct comedi_cmd *cmd)
2273 {
2274         struct pcidas64_private *devpriv = dev->private;
2275
2276         /*  select internal/external master clock */
2277         devpriv->hw_config_bits &= ~MASTER_CLOCK_4020_MASK;
2278         if (cmd->scan_begin_src == TRIG_OTHER) {
2279                 int chanspec = devpriv->ext_clock.chanspec;
2280
2281                 if (CR_CHAN(chanspec))
2282                         devpriv->hw_config_bits |= BNC_CLOCK_4020_BITS;
2283                 else
2284                         devpriv->hw_config_bits |= EXT_CLOCK_4020_BITS;
2285         } else {
2286                 devpriv->hw_config_bits |= INTERNAL_CLOCK_4020_BITS;
2287         }
2288         writew(devpriv->hw_config_bits,
2289                devpriv->main_iobase + HW_CONFIG_REG);
2290 }
2291
2292 static void select_master_clock(struct comedi_device *dev,
2293                                 const struct comedi_cmd *cmd)
2294 {
2295         const struct pcidas64_board *thisboard = dev->board_ptr;
2296
2297         switch (thisboard->layout) {
2298         case LAYOUT_4020:
2299                 select_master_clock_4020(dev, cmd);
2300                 break;
2301         default:
2302                 break;
2303         }
2304 }
2305
2306 static inline void dma_start_sync(struct comedi_device *dev,
2307                                   unsigned int channel)
2308 {
2309         struct pcidas64_private *devpriv = dev->private;
2310         unsigned long flags;
2311
2312         /*  spinlock for plx dma control/status reg */
2313         spin_lock_irqsave(&dev->spinlock, flags);
2314         if (channel)
2315                 writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT |
2316                        PLX_CLEAR_DMA_INTR_BIT,
2317                        devpriv->plx9080_iobase + PLX_DMA1_CS_REG);
2318         else
2319                 writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT |
2320                        PLX_CLEAR_DMA_INTR_BIT,
2321                        devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
2322         spin_unlock_irqrestore(&dev->spinlock, flags);
2323 }
2324
2325 static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd)
2326 {
2327         const struct pcidas64_board *thisboard = dev->board_ptr;
2328         struct pcidas64_private *devpriv = dev->private;
2329         uint32_t convert_counter = 0, scan_counter = 0;
2330
2331         check_adc_timing(dev, cmd);
2332
2333         select_master_clock(dev, cmd);
2334
2335         if (thisboard->layout == LAYOUT_4020) {
2336                 convert_counter = ai_convert_counter_4020(dev, cmd);
2337         } else {
2338                 convert_counter = ai_convert_counter_6xxx(dev, cmd);
2339                 scan_counter = ai_scan_counter_6xxx(dev, cmd);
2340         }
2341
2342         /*  load lower 16 bits of convert interval */
2343         writew(convert_counter & 0xffff,
2344                devpriv->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG);
2345         /*  load upper 8 bits of convert interval */
2346         writew((convert_counter >> 16) & 0xff,
2347                devpriv->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
2348         /*  load lower 16 bits of scan delay */
2349         writew(scan_counter & 0xffff,
2350                devpriv->main_iobase + ADC_DELAY_INTERVAL_LOWER_REG);
2351         /*  load upper 8 bits of scan delay */
2352         writew((scan_counter >> 16) & 0xff,
2353                devpriv->main_iobase + ADC_DELAY_INTERVAL_UPPER_REG);
2354 }
2355
2356 static int use_internal_queue_6xxx(const struct comedi_cmd *cmd)
2357 {
2358         int i;
2359
2360         for (i = 0; i + 1 < cmd->chanlist_len; i++) {
2361                 if (CR_CHAN(cmd->chanlist[i + 1]) !=
2362                     CR_CHAN(cmd->chanlist[i]) + 1)
2363                         return 0;
2364                 if (CR_RANGE(cmd->chanlist[i + 1]) !=
2365                     CR_RANGE(cmd->chanlist[i]))
2366                         return 0;
2367                 if (CR_AREF(cmd->chanlist[i + 1]) != CR_AREF(cmd->chanlist[i]))
2368                         return 0;
2369         }
2370         return 1;
2371 }
2372
2373 static int setup_channel_queue(struct comedi_device *dev,
2374                                const struct comedi_cmd *cmd)
2375 {
2376         const struct pcidas64_board *thisboard = dev->board_ptr;
2377         struct pcidas64_private *devpriv = dev->private;
2378         unsigned short bits;
2379         int i;
2380
2381         if (thisboard->layout != LAYOUT_4020) {
2382                 if (use_internal_queue_6xxx(cmd)) {
2383                         devpriv->hw_config_bits &= ~EXT_QUEUE_BIT;
2384                         writew(devpriv->hw_config_bits,
2385                                devpriv->main_iobase + HW_CONFIG_REG);
2386                         bits = 0;
2387                         /*  set channel */
2388                         bits |= adc_chan_bits(CR_CHAN(cmd->chanlist[0]));
2389                         /*  set gain */
2390                         bits |= ai_range_bits_6xxx(dev,
2391                                                    CR_RANGE(cmd->chanlist[0]));
2392                         /*  set single-ended / differential */
2393                         bits |= se_diff_bit_6xxx(dev,
2394                                                  CR_AREF(cmd->chanlist[0]) ==
2395                                                  AREF_DIFF);
2396                         if (CR_AREF(cmd->chanlist[0]) == AREF_COMMON)
2397                                 bits |= ADC_COMMON_BIT;
2398                         /*  set stop channel */
2399                         writew(adc_chan_bits
2400                                (CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1])),
2401                                devpriv->main_iobase + ADC_QUEUE_HIGH_REG);
2402                         /*  set start channel, and rest of settings */
2403                         writew(bits,
2404                                devpriv->main_iobase + ADC_QUEUE_LOAD_REG);
2405                 } else {
2406                         /*  use external queue */
2407                         if (dev->write_subdev && dev->write_subdev->busy) {
2408                                 warn_external_queue(dev);
2409                                 return -EBUSY;
2410                         }
2411                         devpriv->hw_config_bits |= EXT_QUEUE_BIT;
2412                         writew(devpriv->hw_config_bits,
2413                                devpriv->main_iobase + HW_CONFIG_REG);
2414                         /*  clear DAC buffer to prevent weird interactions */
2415                         writew(0,
2416                                devpriv->main_iobase + DAC_BUFFER_CLEAR_REG);
2417                         /*  clear queue pointer */
2418                         writew(0, devpriv->main_iobase + ADC_QUEUE_CLEAR_REG);
2419                         /*  load external queue */
2420                         for (i = 0; i < cmd->chanlist_len; i++) {
2421                                 bits = 0;
2422                                 /*  set channel */
2423                                 bits |= adc_chan_bits(CR_CHAN(cmd->
2424                                                               chanlist[i]));
2425                                 /*  set gain */
2426                                 bits |= ai_range_bits_6xxx(dev,
2427                                                            CR_RANGE(cmd->
2428                                                                     chanlist
2429                                                                     [i]));
2430                                 /*  set single-ended / differential */
2431                                 bits |= se_diff_bit_6xxx(dev,
2432                                                          CR_AREF(cmd->
2433                                                                  chanlist[i]) ==
2434                                                          AREF_DIFF);
2435                                 if (CR_AREF(cmd->chanlist[i]) == AREF_COMMON)
2436                                         bits |= ADC_COMMON_BIT;
2437                                 /*  mark end of queue */
2438                                 if (i == cmd->chanlist_len - 1)
2439                                         bits |= QUEUE_EOSCAN_BIT |
2440                                                 QUEUE_EOSEQ_BIT;
2441                                 writew(bits,
2442                                        devpriv->main_iobase +
2443                                        ADC_QUEUE_FIFO_REG);
2444                         }
2445                         /* doing a queue clear is not specified in board docs,
2446                          * but required for reliable operation */
2447                         writew(0, devpriv->main_iobase + ADC_QUEUE_CLEAR_REG);
2448                         /*  prime queue holding register */
2449                         writew(0, devpriv->main_iobase + ADC_QUEUE_LOAD_REG);
2450                 }
2451         } else {
2452                 unsigned short old_cal_range_bits = devpriv->i2c_cal_range_bits;
2453
2454                 devpriv->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK;
2455                 /* select BNC inputs */
2456                 devpriv->i2c_cal_range_bits |= adc_src_4020_bits(4);
2457                 /*  select ranges */
2458                 for (i = 0; i < cmd->chanlist_len; i++) {
2459                         unsigned int channel = CR_CHAN(cmd->chanlist[i]);
2460                         unsigned int range = CR_RANGE(cmd->chanlist[i]);
2461
2462                         if (range == 0)
2463                                 devpriv->i2c_cal_range_bits |=
2464                                         attenuate_bit(channel);
2465                         else
2466                                 devpriv->i2c_cal_range_bits &=
2467                                         ~attenuate_bit(channel);
2468                 }
2469                 /*  update calibration/range i2c register only if necessary,
2470                  *  as it is very slow */
2471                 if (old_cal_range_bits != devpriv->i2c_cal_range_bits) {
2472                         uint8_t i2c_data = devpriv->i2c_cal_range_bits;
2473
2474                         i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data,
2475                                   sizeof(i2c_data));
2476                 }
2477         }
2478         return 0;
2479 }
2480
2481 static inline void load_first_dma_descriptor(struct comedi_device *dev,
2482                                              unsigned int dma_channel,
2483                                              unsigned int descriptor_bits)
2484 {
2485         struct pcidas64_private *devpriv = dev->private;
2486
2487         /* The transfer size, pci address, and local address registers
2488          * are supposedly unused during chained dma,
2489          * but I have found that left over values from last operation
2490          * occasionally cause problems with transfer of first dma
2491          * block.  Initializing them to zero seems to fix the problem. */
2492         if (dma_channel) {
2493                 writel(0,
2494                        devpriv->plx9080_iobase + PLX_DMA1_TRANSFER_SIZE_REG);
2495                 writel(0, devpriv->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG);
2496                 writel(0,
2497                        devpriv->plx9080_iobase + PLX_DMA1_LOCAL_ADDRESS_REG);
2498                 writel(descriptor_bits,
2499                        devpriv->plx9080_iobase + PLX_DMA1_DESCRIPTOR_REG);
2500         } else {
2501                 writel(0,
2502                        devpriv->plx9080_iobase + PLX_DMA0_TRANSFER_SIZE_REG);
2503                 writel(0, devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG);
2504                 writel(0,
2505                        devpriv->plx9080_iobase + PLX_DMA0_LOCAL_ADDRESS_REG);
2506                 writel(descriptor_bits,
2507                        devpriv->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
2508         }
2509 }
2510
2511 static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
2512 {
2513         const struct pcidas64_board *thisboard = dev->board_ptr;
2514         struct pcidas64_private *devpriv = dev->private;
2515         struct comedi_async *async = s->async;
2516         struct comedi_cmd *cmd = &async->cmd;
2517         uint32_t bits;
2518         unsigned int i;
2519         unsigned long flags;
2520         int retval;
2521
2522         disable_ai_pacing(dev);
2523         abort_dma(dev, 1);
2524
2525         retval = setup_channel_queue(dev, cmd);
2526         if (retval < 0)
2527                 return retval;
2528
2529         /*  make sure internal calibration source is turned off */
2530         writew(0, devpriv->main_iobase + CALIBRATION_REG);
2531
2532         set_ai_pacing(dev, cmd);
2533
2534         setup_sample_counters(dev, cmd);
2535
2536         enable_ai_interrupts(dev, cmd);
2537
2538         spin_lock_irqsave(&dev->spinlock, flags);
2539         /* set mode, allow conversions through software gate */
2540         devpriv->adc_control1_bits |= ADC_SW_GATE_BIT;
2541         devpriv->adc_control1_bits &= ~ADC_DITHER_BIT;
2542         if (thisboard->layout != LAYOUT_4020) {
2543                 devpriv->adc_control1_bits &= ~ADC_MODE_MASK;
2544                 if (cmd->convert_src == TRIG_EXT)
2545                         /*  good old mode 13 */
2546                         devpriv->adc_control1_bits |= adc_mode_bits(13);
2547                 else
2548                         /*  mode 8.  What else could you need? */
2549                         devpriv->adc_control1_bits |= adc_mode_bits(8);
2550         } else {
2551                 devpriv->adc_control1_bits &= ~CHANNEL_MODE_4020_MASK;
2552                 if (cmd->chanlist_len == 4)
2553                         devpriv->adc_control1_bits |= FOUR_CHANNEL_4020_BITS;
2554                 else if (cmd->chanlist_len == 2)
2555                         devpriv->adc_control1_bits |= TWO_CHANNEL_4020_BITS;
2556                 devpriv->adc_control1_bits &= ~ADC_LO_CHANNEL_4020_MASK;
2557                 devpriv->adc_control1_bits |=
2558                         adc_lo_chan_4020_bits(CR_CHAN(cmd->chanlist[0]));
2559                 devpriv->adc_control1_bits &= ~ADC_HI_CHANNEL_4020_MASK;
2560                 devpriv->adc_control1_bits |=
2561                         adc_hi_chan_4020_bits(CR_CHAN(cmd->chanlist
2562                                                       [cmd->chanlist_len - 1]));
2563         }
2564         writew(devpriv->adc_control1_bits,
2565                devpriv->main_iobase + ADC_CONTROL1_REG);
2566         spin_unlock_irqrestore(&dev->spinlock, flags);
2567
2568         /*  clear adc buffer */
2569         writew(0, devpriv->main_iobase + ADC_BUFFER_CLEAR_REG);
2570
2571         if ((cmd->flags & CMDF_WAKE_EOS) == 0 ||
2572             thisboard->layout == LAYOUT_4020) {
2573                 devpriv->ai_dma_index = 0;
2574
2575                 /*  set dma transfer size */
2576                 for (i = 0; i < ai_dma_ring_count(thisboard); i++)
2577                         devpriv->ai_dma_desc[i].transfer_size =
2578                                 cpu_to_le32(dma_transfer_size(dev) *
2579                                             sizeof(uint16_t));
2580
2581                 /*  give location of first dma descriptor */
2582                 load_first_dma_descriptor(dev, 1,
2583                                           devpriv->ai_dma_desc_bus_addr |
2584                                           PLX_DESC_IN_PCI_BIT |
2585                                           PLX_INTR_TERM_COUNT |
2586                                           PLX_XFER_LOCAL_TO_PCI);
2587
2588                 dma_start_sync(dev, 1);
2589         }
2590
2591         if (thisboard->layout == LAYOUT_4020) {
2592                 /* set source for external triggers */
2593                 bits = 0;
2594                 if (cmd->start_src == TRIG_EXT && CR_CHAN(cmd->start_arg))
2595                         bits |= EXT_START_TRIG_BNC_BIT;
2596                 if (cmd->stop_src == TRIG_EXT && CR_CHAN(cmd->stop_arg))
2597                         bits |= EXT_STOP_TRIG_BNC_BIT;
2598                 writew(bits, devpriv->main_iobase + DAQ_ATRIG_LOW_4020_REG);
2599         }
2600
2601         spin_lock_irqsave(&dev->spinlock, flags);
2602
2603         /* enable pacing, triggering, etc */
2604         bits = ADC_ENABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT;
2605         if (cmd->flags & CMDF_WAKE_EOS)
2606                 bits |= ADC_DMA_DISABLE_BIT;
2607         /*  set start trigger */
2608         if (cmd->start_src == TRIG_EXT) {
2609                 bits |= ADC_START_TRIG_EXT_BITS;
2610                 if (cmd->start_arg & CR_INVERT)
2611                         bits |= ADC_START_TRIG_FALLING_BIT;
2612         } else if (cmd->start_src == TRIG_NOW)
2613                 bits |= ADC_START_TRIG_SOFT_BITS;
2614         if (use_hw_sample_counter(cmd))
2615                 bits |= ADC_SAMPLE_COUNTER_EN_BIT;
2616         writew(bits, devpriv->main_iobase + ADC_CONTROL0_REG);
2617
2618         devpriv->ai_cmd_running = 1;
2619
2620         spin_unlock_irqrestore(&dev->spinlock, flags);
2621
2622         /*  start acquisition */
2623         if (cmd->start_src == TRIG_NOW)
2624                 writew(0, devpriv->main_iobase + ADC_START_REG);
2625
2626         return 0;
2627 }
2628
2629 /* read num_samples from 16 bit wide ai fifo */
2630 static void pio_drain_ai_fifo_16(struct comedi_device *dev)
2631 {
2632         struct pcidas64_private *devpriv = dev->private;
2633         struct comedi_subdevice *s = dev->read_subdev;
2634         unsigned int i;
2635         uint16_t prepost_bits;
2636         int read_segment, read_index, write_segment, write_index;
2637         int num_samples;
2638
2639         do {
2640                 /*  get least significant 15 bits */
2641                 read_index = readw(devpriv->main_iobase + ADC_READ_PNTR_REG) &
2642                              0x7fff;
2643                 write_index = readw(devpriv->main_iobase + ADC_WRITE_PNTR_REG) &
2644                               0x7fff;
2645                 /* Get most significant bits (grey code).
2646                  * Different boards use different code so use a scheme
2647                  * that doesn't depend on encoding.  This read must
2648                  * occur after reading least significant 15 bits to avoid race
2649                  * with fifo switching to next segment. */
2650                 prepost_bits = readw(devpriv->main_iobase + PREPOST_REG);
2651
2652                 /* if read and write pointers are not on the same fifo segment,
2653                  * read to the end of the read segment */
2654                 read_segment = adc_upper_read_ptr_code(prepost_bits);
2655                 write_segment = adc_upper_write_ptr_code(prepost_bits);
2656
2657                 if (read_segment != write_segment)
2658                         num_samples =
2659                                 devpriv->ai_fifo_segment_length - read_index;
2660                 else
2661                         num_samples = write_index - read_index;
2662                 if (num_samples < 0) {
2663                         dev_err(dev->class_dev,
2664                                 "cb_pcidas64: bug! num_samples < 0\n");
2665                         break;
2666                 }
2667
2668                 num_samples = comedi_nsamples_left(s, num_samples);
2669                 if (num_samples == 0)
2670                         break;
2671
2672                 for (i = 0; i < num_samples; i++) {
2673                         unsigned short val;
2674
2675                         val = readw(devpriv->main_iobase + ADC_FIFO_REG);
2676                         comedi_buf_write_samples(s, &val, 1);
2677                 }
2678
2679         } while (read_segment != write_segment);
2680 }
2681
2682 /* Read from 32 bit wide ai fifo of 4020 - deal with insane grey coding of
2683  * pointers.  The pci-4020 hardware only supports dma transfers (it only
2684  * supports the use of pio for draining the last remaining points from the
2685  * fifo when a data acquisition operation has completed).
2686  */
2687 static void pio_drain_ai_fifo_32(struct comedi_device *dev)
2688 {
2689         struct pcidas64_private *devpriv = dev->private;
2690         struct comedi_subdevice *s = dev->read_subdev;
2691         unsigned int nsamples;
2692         unsigned int i;
2693         uint32_t fifo_data;
2694         int write_code =
2695                 readw(devpriv->main_iobase + ADC_WRITE_PNTR_REG) & 0x7fff;
2696         int read_code =
2697                 readw(devpriv->main_iobase + ADC_READ_PNTR_REG) & 0x7fff;
2698
2699         nsamples = comedi_nsamples_left(s, 100000);
2700         for (i = 0; read_code != write_code && i < nsamples;) {
2701                 unsigned short val;
2702
2703                 fifo_data = readl(dev->mmio + ADC_FIFO_REG);
2704                 val = fifo_data & 0xffff;
2705                 comedi_buf_write_samples(s, &val, 1);
2706                 i++;
2707                 if (i < nsamples) {
2708                         val = (fifo_data >> 16) & 0xffff;
2709                         comedi_buf_write_samples(s, &val, 1);
2710                         i++;
2711                 }
2712                 read_code = readw(devpriv->main_iobase + ADC_READ_PNTR_REG) &
2713                             0x7fff;
2714         }
2715 }
2716
2717 /* empty fifo */
2718 static void pio_drain_ai_fifo(struct comedi_device *dev)
2719 {
2720         const struct pcidas64_board *thisboard = dev->board_ptr;
2721
2722         if (thisboard->layout == LAYOUT_4020)
2723                 pio_drain_ai_fifo_32(dev);
2724         else
2725                 pio_drain_ai_fifo_16(dev);
2726 }
2727
2728 static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel)
2729 {
2730         const struct pcidas64_board *thisboard = dev->board_ptr;
2731         struct pcidas64_private *devpriv = dev->private;
2732         struct comedi_subdevice *s = dev->read_subdev;
2733         uint32_t next_transfer_addr;
2734         int j;
2735         int num_samples = 0;
2736         void __iomem *pci_addr_reg;
2737
2738         if (channel)
2739                 pci_addr_reg =
2740                     devpriv->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG;
2741         else
2742                 pci_addr_reg =
2743                     devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG;
2744
2745         /*  loop until we have read all the full buffers */
2746         for (j = 0, next_transfer_addr = readl(pci_addr_reg);
2747              (next_transfer_addr <
2748               devpriv->ai_buffer_bus_addr[devpriv->ai_dma_index] ||
2749               next_transfer_addr >=
2750               devpriv->ai_buffer_bus_addr[devpriv->ai_dma_index] +
2751               DMA_BUFFER_SIZE) && j < ai_dma_ring_count(thisboard); j++) {
2752                 /*  transfer data from dma buffer to comedi buffer */
2753                 num_samples = comedi_nsamples_left(s, dma_transfer_size(dev));
2754                 comedi_buf_write_samples(s,
2755                                 devpriv->ai_buffer[devpriv->ai_dma_index],
2756                                 num_samples);
2757                 devpriv->ai_dma_index = (devpriv->ai_dma_index + 1) %
2758                                         ai_dma_ring_count(thisboard);
2759         }
2760         /* XXX check for dma ring buffer overrun
2761          * (use end-of-chain bit to mark last unused buffer) */
2762 }
2763
2764 static void handle_ai_interrupt(struct comedi_device *dev,
2765                                 unsigned short status,
2766                                 unsigned int plx_status)
2767 {
2768         const struct pcidas64_board *thisboard = dev->board_ptr;
2769         struct pcidas64_private *devpriv = dev->private;
2770         struct comedi_subdevice *s = dev->read_subdev;
2771         struct comedi_async *async = s->async;
2772         struct comedi_cmd *cmd = &async->cmd;
2773         uint8_t dma1_status;
2774         unsigned long flags;
2775
2776         /*  check for fifo overrun */
2777         if (status & ADC_OVERRUN_BIT) {
2778                 dev_err(dev->class_dev, "fifo overrun\n");
2779                 async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
2780         }
2781         /*  spin lock makes sure no one else changes plx dma control reg */
2782         spin_lock_irqsave(&dev->spinlock, flags);
2783         dma1_status = readb(devpriv->plx9080_iobase + PLX_DMA1_CS_REG);
2784         if (plx_status & ICS_DMA1_A) {  /*  dma chan 1 interrupt */
2785                 writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
2786                        devpriv->plx9080_iobase + PLX_DMA1_CS_REG);
2787
2788                 if (dma1_status & PLX_DMA_EN_BIT)
2789                         drain_dma_buffers(dev, 1);
2790         }
2791         spin_unlock_irqrestore(&dev->spinlock, flags);
2792
2793         /*  drain fifo with pio */
2794         if ((status & ADC_DONE_BIT) ||
2795             ((cmd->flags & CMDF_WAKE_EOS) &&
2796              (status & ADC_INTR_PENDING_BIT) &&
2797              (thisboard->layout != LAYOUT_4020))) {
2798                 spin_lock_irqsave(&dev->spinlock, flags);
2799                 if (devpriv->ai_cmd_running) {
2800                         spin_unlock_irqrestore(&dev->spinlock, flags);
2801                         pio_drain_ai_fifo(dev);
2802                 } else
2803                         spin_unlock_irqrestore(&dev->spinlock, flags);
2804         }
2805         /*  if we are have all the data, then quit */
2806         if ((cmd->stop_src == TRIG_COUNT &&
2807              async->scans_done >= cmd->stop_arg) ||
2808             (cmd->stop_src == TRIG_EXT && (status & ADC_STOP_BIT)))
2809                 async->events |= COMEDI_CB_EOA;
2810
2811         comedi_handle_events(dev, s);
2812 }
2813
2814 static inline unsigned int prev_ao_dma_index(struct comedi_device *dev)
2815 {
2816         struct pcidas64_private *devpriv = dev->private;
2817         unsigned int buffer_index;
2818
2819         if (devpriv->ao_dma_index == 0)
2820                 buffer_index = AO_DMA_RING_COUNT - 1;
2821         else
2822                 buffer_index = devpriv->ao_dma_index - 1;
2823         return buffer_index;
2824 }
2825
2826 static int last_ao_dma_load_completed(struct comedi_device *dev)
2827 {
2828         struct pcidas64_private *devpriv = dev->private;
2829         unsigned int buffer_index;
2830         unsigned int transfer_address;
2831         unsigned short dma_status;
2832
2833         buffer_index = prev_ao_dma_index(dev);
2834         dma_status = readb(devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
2835         if ((dma_status & PLX_DMA_DONE_BIT) == 0)
2836                 return 0;
2837
2838         transfer_address =
2839                 readl(devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG);
2840         if (transfer_address != devpriv->ao_buffer_bus_addr[buffer_index])
2841                 return 0;
2842
2843         return 1;
2844 }
2845
2846 static inline int ao_dma_needs_restart(struct comedi_device *dev,
2847                                        unsigned short dma_status)
2848 {
2849         if ((dma_status & PLX_DMA_DONE_BIT) == 0 ||
2850             (dma_status & PLX_DMA_EN_BIT) == 0)
2851                 return 0;
2852         if (last_ao_dma_load_completed(dev))
2853                 return 0;
2854
2855         return 1;
2856 }
2857
2858 static void restart_ao_dma(struct comedi_device *dev)
2859 {
2860         struct pcidas64_private *devpriv = dev->private;
2861         unsigned int dma_desc_bits;
2862
2863         dma_desc_bits =
2864                 readl(devpriv->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
2865         dma_desc_bits &= ~PLX_END_OF_CHAIN_BIT;
2866         load_first_dma_descriptor(dev, 0, dma_desc_bits);
2867
2868         dma_start_sync(dev, 0);
2869 }
2870
2871 static unsigned int cb_pcidas64_ao_fill_buffer(struct comedi_device *dev,
2872                                                struct comedi_subdevice *s,
2873                                                unsigned short *dest,
2874                                                unsigned int max_bytes)
2875 {
2876         unsigned int nsamples = comedi_bytes_to_samples(s, max_bytes);
2877         unsigned int actual_bytes;
2878
2879         nsamples = comedi_nsamples_left(s, nsamples);
2880         actual_bytes = comedi_buf_read_samples(s, dest, nsamples);
2881
2882         return comedi_bytes_to_samples(s, actual_bytes);
2883 }
2884
2885 static unsigned int load_ao_dma_buffer(struct comedi_device *dev,
2886                                        const struct comedi_cmd *cmd)
2887 {
2888         struct pcidas64_private *devpriv = dev->private;
2889         struct comedi_subdevice *s = dev->write_subdev;
2890         unsigned int buffer_index = devpriv->ao_dma_index;
2891         unsigned int prev_buffer_index = prev_ao_dma_index(dev);
2892         unsigned int nsamples;
2893         unsigned int nbytes;
2894         unsigned int next_bits;
2895
2896         nsamples = cb_pcidas64_ao_fill_buffer(dev, s,
2897                                               devpriv->ao_buffer[buffer_index],
2898                                               DMA_BUFFER_SIZE);
2899         if (nsamples == 0)
2900                 return 0;
2901
2902         nbytes = comedi_samples_to_bytes(s, nsamples);
2903         devpriv->ao_dma_desc[buffer_index].transfer_size = cpu_to_le32(nbytes);
2904         /* set end of chain bit so we catch underruns */
2905         next_bits = le32_to_cpu(devpriv->ao_dma_desc[buffer_index].next);
2906         next_bits |= PLX_END_OF_CHAIN_BIT;
2907         devpriv->ao_dma_desc[buffer_index].next = cpu_to_le32(next_bits);
2908         /* clear end of chain bit on previous buffer now that we have set it
2909          * for the last buffer */
2910         next_bits = le32_to_cpu(devpriv->ao_dma_desc[prev_buffer_index].next);
2911         next_bits &= ~PLX_END_OF_CHAIN_BIT;
2912         devpriv->ao_dma_desc[prev_buffer_index].next = cpu_to_le32(next_bits);
2913
2914         devpriv->ao_dma_index = (buffer_index + 1) % AO_DMA_RING_COUNT;
2915
2916         return nbytes;
2917 }
2918
2919 static void load_ao_dma(struct comedi_device *dev, const struct comedi_cmd *cmd)
2920 {
2921         struct pcidas64_private *devpriv = dev->private;
2922         unsigned int num_bytes;
2923         unsigned int next_transfer_addr;
2924         void __iomem *pci_addr_reg =
2925                 devpriv->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG;
2926         unsigned int buffer_index;
2927
2928         do {
2929                 buffer_index = devpriv->ao_dma_index;
2930                 /* don't overwrite data that hasn't been transferred yet */
2931                 next_transfer_addr = readl(pci_addr_reg);
2932                 if (next_transfer_addr >=
2933                     devpriv->ao_buffer_bus_addr[buffer_index] &&
2934                     next_transfer_addr <
2935                     devpriv->ao_buffer_bus_addr[buffer_index] +
2936                     DMA_BUFFER_SIZE)
2937                         return;
2938                 num_bytes = load_ao_dma_buffer(dev, cmd);
2939         } while (num_bytes >= DMA_BUFFER_SIZE);
2940 }
2941
2942 static void handle_ao_interrupt(struct comedi_device *dev,
2943                                 unsigned short status, unsigned int plx_status)
2944 {
2945         struct pcidas64_private *devpriv = dev->private;
2946         struct comedi_subdevice *s = dev->write_subdev;
2947         struct comedi_async *async;
2948         struct comedi_cmd *cmd;
2949         uint8_t dma0_status;
2950         unsigned long flags;
2951
2952         /* board might not support ao, in which case write_subdev is NULL */
2953         if (s == NULL)
2954                 return;
2955         async = s->async;
2956         cmd = &async->cmd;
2957
2958         /*  spin lock makes sure no one else changes plx dma control reg */
2959         spin_lock_irqsave(&dev->spinlock, flags);
2960         dma0_status = readb(devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
2961         if (plx_status & ICS_DMA0_A) {  /*  dma chan 0 interrupt */
2962                 if ((dma0_status & PLX_DMA_EN_BIT) &&
2963                     !(dma0_status & PLX_DMA_DONE_BIT))
2964                         writeb(PLX_DMA_EN_BIT | PLX_CLEAR_DMA_INTR_BIT,
2965                                devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
2966                 else
2967                         writeb(PLX_CLEAR_DMA_INTR_BIT,
2968                                devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
2969                 spin_unlock_irqrestore(&dev->spinlock, flags);
2970                 if (dma0_status & PLX_DMA_EN_BIT) {
2971                         load_ao_dma(dev, cmd);
2972                         /* try to recover from dma end-of-chain event */
2973                         if (ao_dma_needs_restart(dev, dma0_status))
2974                                 restart_ao_dma(dev);
2975                 }
2976         } else {
2977                 spin_unlock_irqrestore(&dev->spinlock, flags);
2978         }
2979
2980         if ((status & DAC_DONE_BIT)) {
2981                 if ((cmd->stop_src == TRIG_COUNT &&
2982                      async->scans_done >= cmd->stop_arg) ||
2983                     last_ao_dma_load_completed(dev))
2984                         async->events |= COMEDI_CB_EOA;
2985                 else
2986                         async->events |= COMEDI_CB_ERROR;
2987         }
2988         comedi_handle_events(dev, s);
2989 }
2990
2991 static irqreturn_t handle_interrupt(int irq, void *d)
2992 {
2993         struct comedi_device *dev = d;
2994         struct pcidas64_private *devpriv = dev->private;
2995         unsigned short status;
2996         uint32_t plx_status;
2997         uint32_t plx_bits;
2998
2999         plx_status = readl(devpriv->plx9080_iobase + PLX_INTRCS_REG);
3000         status = readw(devpriv->main_iobase + HW_STATUS_REG);
3001
3002         /* an interrupt before all the postconfig stuff gets done could
3003          * cause a NULL dereference if we continue through the
3004          * interrupt handler */
3005         if (!dev->attached)
3006                 return IRQ_HANDLED;
3007
3008         handle_ai_interrupt(dev, status, plx_status);
3009         handle_ao_interrupt(dev, status, plx_status);
3010
3011         /*  clear possible plx9080 interrupt sources */
3012         if (plx_status & ICS_LDIA) {    /*  clear local doorbell interrupt */
3013                 plx_bits = readl(devpriv->plx9080_iobase + PLX_DBR_OUT_REG);
3014                 writel(plx_bits, devpriv->plx9080_iobase + PLX_DBR_OUT_REG);
3015         }
3016
3017         return IRQ_HANDLED;
3018 }
3019
3020 static int ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
3021 {
3022         struct pcidas64_private *devpriv = dev->private;
3023         unsigned long flags;
3024
3025         spin_lock_irqsave(&dev->spinlock, flags);
3026         if (devpriv->ai_cmd_running == 0) {
3027                 spin_unlock_irqrestore(&dev->spinlock, flags);
3028                 return 0;
3029         }
3030         devpriv->ai_cmd_running = 0;
3031         spin_unlock_irqrestore(&dev->spinlock, flags);
3032
3033         disable_ai_pacing(dev);
3034
3035         abort_dma(dev, 1);
3036
3037         return 0;
3038 }
3039
3040 static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
3041                     struct comedi_insn *insn, unsigned int *data)
3042 {
3043         const struct pcidas64_board *thisboard = dev->board_ptr;
3044         struct pcidas64_private *devpriv = dev->private;
3045         int chan = CR_CHAN(insn->chanspec);
3046         int range = CR_RANGE(insn->chanspec);
3047
3048         /*  do some initializing */
3049         writew(0, devpriv->main_iobase + DAC_CONTROL0_REG);
3050
3051         /*  set range */
3052         set_dac_range_bits(dev, &devpriv->dac_control1_bits, chan, range);
3053         writew(devpriv->dac_control1_bits,
3054                devpriv->main_iobase + DAC_CONTROL1_REG);
3055
3056         /*  write to channel */
3057         if (thisboard->layout == LAYOUT_4020) {
3058                 writew(data[0] & 0xff,
3059                        devpriv->main_iobase + dac_lsb_4020_reg(chan));
3060                 writew((data[0] >> 8) & 0xf,
3061                        devpriv->main_iobase + dac_msb_4020_reg(chan));
3062         } else {
3063                 writew(data[0], devpriv->main_iobase + dac_convert_reg(chan));
3064         }
3065
3066         /*  remember output value */
3067         s->readback[chan] = data[0];
3068
3069         return 1;
3070 }
3071
3072 static void set_dac_control0_reg(struct comedi_device *dev,
3073                                  const struct comedi_cmd *cmd)
3074 {
3075         struct pcidas64_private *devpriv = dev->private;
3076         unsigned int bits = DAC_ENABLE_BIT | WAVEFORM_GATE_LEVEL_BIT |
3077                             WAVEFORM_GATE_ENABLE_BIT | WAVEFORM_GATE_SELECT_BIT;
3078
3079         if (cmd->start_src == TRIG_EXT) {
3080                 bits |= WAVEFORM_TRIG_EXT_BITS;
3081                 if (cmd->start_arg & CR_INVERT)
3082                         bits |= WAVEFORM_TRIG_FALLING_BIT;
3083         } else {
3084                 bits |= WAVEFORM_TRIG_SOFT_BITS;
3085         }
3086         if (cmd->scan_begin_src == TRIG_EXT) {
3087                 bits |= DAC_EXT_UPDATE_ENABLE_BIT;
3088                 if (cmd->scan_begin_arg & CR_INVERT)
3089                         bits |= DAC_EXT_UPDATE_FALLING_BIT;
3090         }
3091         writew(bits, devpriv->main_iobase + DAC_CONTROL0_REG);
3092 }
3093
3094 static void set_dac_control1_reg(struct comedi_device *dev,
3095                                  const struct comedi_cmd *cmd)
3096 {
3097         struct pcidas64_private *devpriv = dev->private;
3098         int i;
3099
3100         for (i = 0; i < cmd->chanlist_len; i++) {
3101                 int channel, range;
3102
3103                 channel = CR_CHAN(cmd->chanlist[i]);
3104                 range = CR_RANGE(cmd->chanlist[i]);
3105                 set_dac_range_bits(dev, &devpriv->dac_control1_bits, channel,
3106                                    range);
3107         }
3108         devpriv->dac_control1_bits |= DAC_SW_GATE_BIT;
3109         writew(devpriv->dac_control1_bits,
3110                devpriv->main_iobase + DAC_CONTROL1_REG);
3111 }
3112
3113 static void set_dac_select_reg(struct comedi_device *dev,
3114                                const struct comedi_cmd *cmd)
3115 {
3116         struct pcidas64_private *devpriv = dev->private;
3117         uint16_t bits;
3118         unsigned int first_channel, last_channel;
3119
3120         first_channel = CR_CHAN(cmd->chanlist[0]);
3121         last_channel = CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1]);
3122         if (last_channel < first_channel)
3123                 dev_err(dev->class_dev,
3124                         "bug! last ao channel < first ao channel\n");
3125
3126         bits = (first_channel & 0x7) | (last_channel & 0x7) << 3;
3127
3128         writew(bits, devpriv->main_iobase + DAC_SELECT_REG);
3129 }
3130
3131 static unsigned int get_ao_divisor(unsigned int ns, unsigned int flags)
3132 {
3133         return get_divisor(ns, flags) - 2;
3134 }
3135
3136 static void set_dac_interval_regs(struct comedi_device *dev,
3137                                   const struct comedi_cmd *cmd)
3138 {
3139         struct pcidas64_private *devpriv = dev->private;
3140         unsigned int divisor;
3141
3142         if (cmd->scan_begin_src != TRIG_TIMER)
3143                 return;
3144
3145         divisor = get_ao_divisor(cmd->scan_begin_arg, cmd->flags);
3146         if (divisor > max_counter_value) {
3147                 dev_err(dev->class_dev, "bug! ao divisor too big\n");
3148                 divisor = max_counter_value;
3149         }
3150         writew(divisor & 0xffff,
3151                devpriv->main_iobase + DAC_SAMPLE_INTERVAL_LOWER_REG);
3152         writew((divisor >> 16) & 0xff,
3153                devpriv->main_iobase + DAC_SAMPLE_INTERVAL_UPPER_REG);
3154 }
3155
3156 static int prep_ao_dma(struct comedi_device *dev, const struct comedi_cmd *cmd)
3157 {
3158         struct pcidas64_private *devpriv = dev->private;
3159         struct comedi_subdevice *s = dev->write_subdev;
3160         unsigned int nsamples;
3161         unsigned int nbytes;
3162         int i;
3163
3164         /* clear queue pointer too, since external queue has
3165          * weird interactions with ao fifo */
3166         writew(0, devpriv->main_iobase + ADC_QUEUE_CLEAR_REG);
3167         writew(0, devpriv->main_iobase + DAC_BUFFER_CLEAR_REG);
3168
3169         nsamples = cb_pcidas64_ao_fill_buffer(dev, s,
3170                                               devpriv->ao_bounce_buffer,
3171                                               DAC_FIFO_SIZE);
3172         if (nsamples == 0)
3173                 return -1;
3174
3175         for (i = 0; i < nsamples; i++) {
3176                 writew(devpriv->ao_bounce_buffer[i],
3177                        devpriv->main_iobase + DAC_FIFO_REG);
3178         }
3179
3180         if (cmd->stop_src == TRIG_COUNT &&
3181             s->async->scans_done >= cmd->stop_arg)
3182                 return 0;
3183
3184         nbytes = load_ao_dma_buffer(dev, cmd);
3185         if (nbytes == 0)
3186                 return -1;
3187         load_ao_dma(dev, cmd);
3188
3189         dma_start_sync(dev, 0);
3190
3191         return 0;
3192 }
3193
3194 static inline int external_ai_queue_in_use(struct comedi_device *dev,
3195                                            struct comedi_subdevice *s,
3196                                            struct comedi_cmd *cmd)
3197 {
3198         const struct pcidas64_board *thisboard = dev->board_ptr;
3199
3200         if (s->busy)
3201                 return 0;
3202         if (thisboard->layout == LAYOUT_4020)
3203                 return 0;
3204         else if (use_internal_queue_6xxx(cmd))
3205                 return 0;
3206         return 1;
3207 }
3208
3209 static int ao_inttrig(struct comedi_device *dev, struct comedi_subdevice *s,
3210                       unsigned int trig_num)
3211 {
3212         struct pcidas64_private *devpriv = dev->private;
3213         struct comedi_cmd *cmd = &s->async->cmd;
3214         int retval;
3215
3216         if (trig_num != cmd->start_arg)
3217                 return -EINVAL;
3218
3219         retval = prep_ao_dma(dev, cmd);
3220         if (retval < 0)
3221                 return -EPIPE;
3222
3223         set_dac_control0_reg(dev, cmd);
3224
3225         if (cmd->start_src == TRIG_INT)
3226                 writew(0, devpriv->main_iobase + DAC_START_REG);
3227
3228         s->async->inttrig = NULL;
3229
3230         return 0;
3231 }
3232
3233 static int ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
3234 {
3235         struct pcidas64_private *devpriv = dev->private;
3236         struct comedi_cmd *cmd = &s->async->cmd;
3237
3238         if (external_ai_queue_in_use(dev, s, cmd)) {
3239                 warn_external_queue(dev);
3240                 return -EBUSY;
3241         }
3242         /* disable analog output system during setup */
3243         writew(0x0, devpriv->main_iobase + DAC_CONTROL0_REG);
3244
3245         devpriv->ao_dma_index = 0;
3246
3247         set_dac_select_reg(dev, cmd);
3248         set_dac_interval_regs(dev, cmd);
3249         load_first_dma_descriptor(dev, 0, devpriv->ao_dma_desc_bus_addr |
3250                                   PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT);
3251
3252         set_dac_control1_reg(dev, cmd);
3253         s->async->inttrig = ao_inttrig;
3254
3255         return 0;
3256 }
3257
3258 static int cb_pcidas64_ao_check_chanlist(struct comedi_device *dev,
3259                                          struct comedi_subdevice *s,
3260                                          struct comedi_cmd *cmd)
3261 {
3262         unsigned int chan0 = CR_CHAN(cmd->chanlist[0]);
3263         int i;
3264
3265         for (i = 1; i < cmd->chanlist_len; i++) {
3266                 unsigned int chan = CR_CHAN(cmd->chanlist[i]);
3267
3268                 if (chan != (chan0 + i)) {
3269                         dev_dbg(dev->class_dev,
3270                                 "chanlist must use consecutive channels\n");
3271                         return -EINVAL;
3272                 }
3273         }
3274
3275         return 0;
3276 }
3277
3278 static int ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
3279                       struct comedi_cmd *cmd)
3280 {
3281         const struct pcidas64_board *thisboard = dev->board_ptr;
3282         int err = 0;
3283         unsigned int tmp_arg;
3284
3285         /* Step 1 : check if triggers are trivially valid */
3286
3287         err |= cfc_check_trigger_src(&cmd->start_src, TRIG_INT | TRIG_EXT);
3288         err |= cfc_check_trigger_src(&cmd->scan_begin_src,
3289                                      TRIG_TIMER | TRIG_EXT);
3290         err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_NOW);
3291         err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
3292         err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_NONE);
3293
3294         if (err)
3295                 return 1;
3296
3297         /* Step 2a : make sure trigger sources are unique */
3298
3299         err |= cfc_check_trigger_is_unique(cmd->start_src);
3300         err |= cfc_check_trigger_is_unique(cmd->scan_begin_src);
3301
3302         /* Step 2b : and mutually compatible */
3303
3304         if (cmd->convert_src == TRIG_EXT && cmd->scan_begin_src == TRIG_TIMER)
3305                 err |= -EINVAL;
3306         if (cmd->stop_src != TRIG_COUNT &&
3307             cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_EXT)
3308                 err |= -EINVAL;
3309
3310         if (err)
3311                 return 2;
3312
3313         /* Step 3: check if arguments are trivially valid */
3314
3315         err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
3316
3317         if (cmd->scan_begin_src == TRIG_TIMER) {
3318                 err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
3319                                                  thisboard->ao_scan_speed);
3320                 if (get_ao_divisor(cmd->scan_begin_arg, cmd->flags) >
3321                     max_counter_value) {
3322                         cmd->scan_begin_arg = (max_counter_value + 2) *
3323                                               TIMER_BASE;
3324                         err |= -EINVAL;
3325                 }
3326         }
3327
3328         err |= cfc_check_trigger_arg_min(&cmd->chanlist_len, 1);
3329         err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
3330
3331         if (err)
3332                 return 3;
3333
3334         /* step 4: fix up any arguments */
3335
3336         if (cmd->scan_begin_src == TRIG_TIMER) {
3337                 tmp_arg = cmd->scan_begin_arg;
3338                 cmd->scan_begin_arg = get_divisor(cmd->scan_begin_arg,
3339                                                   cmd->flags) * TIMER_BASE;
3340                 if (tmp_arg != cmd->scan_begin_arg)
3341                         err++;
3342         }
3343
3344         if (err)
3345                 return 4;
3346
3347         /* Step 5: check channel list if it exists */
3348         if (cmd->chanlist && cmd->chanlist_len > 0)
3349                 err |= cb_pcidas64_ao_check_chanlist(dev, s, cmd);
3350
3351         if (err)
3352                 return 5;
3353
3354         return 0;
3355 }
3356
3357 static int ao_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
3358 {
3359         struct pcidas64_private *devpriv = dev->private;
3360
3361         writew(0x0, devpriv->main_iobase + DAC_CONTROL0_REG);
3362         abort_dma(dev, 0);
3363         return 0;
3364 }
3365
3366 static int dio_callback_4020(struct comedi_device *dev,
3367                              int dir, int port, int data, unsigned long iobase)
3368 {
3369         struct pcidas64_private *devpriv = dev->private;
3370
3371         if (dir) {
3372                 writew(data, devpriv->main_iobase + iobase + 2 * port);
3373                 return 0;
3374         }
3375         return readw(devpriv->main_iobase + iobase + 2 * port);
3376 }
3377
3378 static int di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
3379                     struct comedi_insn *insn, unsigned int *data)
3380 {
3381         unsigned int bits;
3382
3383         bits = readb(dev->mmio + DI_REG);
3384         bits &= 0xf;
3385         data[1] = bits;
3386         data[0] = 0;
3387
3388         return insn->n;
3389 }
3390
3391 static int do_wbits(struct comedi_device *dev,
3392                     struct comedi_subdevice *s,
3393                     struct comedi_insn *insn,
3394                     unsigned int *data)
3395 {
3396         if (comedi_dio_update_state(s, data))
3397                 writeb(s->state, dev->mmio + DO_REG);
3398
3399         data[1] = s->state;
3400
3401         return insn->n;
3402 }
3403
3404 static int dio_60xx_config_insn(struct comedi_device *dev,
3405                                 struct comedi_subdevice *s,
3406                                 struct comedi_insn *insn,
3407                                 unsigned int *data)
3408 {
3409         int ret;
3410
3411         ret = comedi_dio_insn_config(dev, s, insn, data, 0);
3412         if (ret)
3413                 return ret;
3414
3415         writeb(s->io_bits, dev->mmio + DIO_DIRECTION_60XX_REG);
3416
3417         return insn->n;
3418 }
3419
3420 static int dio_60xx_wbits(struct comedi_device *dev,
3421                           struct comedi_subdevice *s,
3422                           struct comedi_insn *insn,
3423                           unsigned int *data)
3424 {
3425         if (comedi_dio_update_state(s, data))
3426                 writeb(s->state, dev->mmio + DIO_DATA_60XX_REG);
3427
3428         data[1] = readb(dev->mmio + DIO_DATA_60XX_REG);
3429
3430         return insn->n;
3431 }
3432
3433 /* pci-6025 8800 caldac:
3434  * address 0 == dac channel 0 offset
3435  * address 1 == dac channel 0 gain
3436  * address 2 == dac channel 1 offset
3437  * address 3 == dac channel 1 gain
3438  * address 4 == fine adc offset
3439  * address 5 == coarse adc offset
3440  * address 6 == coarse adc gain
3441  * address 7 == fine adc gain
3442  */
3443 /* pci-6402/16 uses all 8 channels for dac:
3444  * address 0 == dac channel 0 fine gain
3445  * address 1 == dac channel 0 coarse gain
3446  * address 2 == dac channel 0 coarse offset
3447  * address 3 == dac channel 1 coarse offset
3448  * address 4 == dac channel 1 fine gain
3449  * address 5 == dac channel 1 coarse gain
3450  * address 6 == dac channel 0 fine offset
3451  * address 7 == dac channel 1 fine offset
3452 */
3453
3454 static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
3455                              uint8_t value)
3456 {
3457         struct pcidas64_private *devpriv = dev->private;
3458         static const int num_caldac_channels = 8;
3459         static const int bitstream_length = 11;
3460         unsigned int bitstream = ((address & 0x7) << 8) | value;
3461         unsigned int bit, register_bits;
3462         static const int caldac_8800_udelay = 1;
3463
3464         if (address >= num_caldac_channels) {
3465                 dev_err(dev->class_dev, "illegal caldac channel\n");
3466                 return -1;
3467         }
3468         for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
3469                 register_bits = 0;
3470                 if (bitstream & bit)
3471                         register_bits |= SERIAL_DATA_IN_BIT;
3472                 udelay(caldac_8800_udelay);
3473                 writew(register_bits, devpriv->main_iobase + CALIBRATION_REG);
3474                 register_bits |= SERIAL_CLOCK_BIT;
3475                 udelay(caldac_8800_udelay);
3476                 writew(register_bits, devpriv->main_iobase + CALIBRATION_REG);
3477         }
3478         udelay(caldac_8800_udelay);
3479         writew(SELECT_8800_BIT, devpriv->main_iobase + CALIBRATION_REG);
3480         udelay(caldac_8800_udelay);
3481         writew(0, devpriv->main_iobase + CALIBRATION_REG);
3482         udelay(caldac_8800_udelay);
3483         return 0;
3484 }
3485
3486 /* 4020 caldacs */
3487 static int caldac_i2c_write(struct comedi_device *dev,
3488                             unsigned int caldac_channel, unsigned int value)
3489 {
3490         uint8_t serial_bytes[3];
3491         uint8_t i2c_addr;
3492         enum pointer_bits {
3493                 /*  manual has gain and offset bits switched */
3494                 OFFSET_0_2 = 0x1,
3495                 GAIN_0_2 = 0x2,
3496                 OFFSET_1_3 = 0x4,
3497                 GAIN_1_3 = 0x8,
3498         };
3499         enum data_bits {
3500                 NOT_CLEAR_REGISTERS = 0x20,
3501         };
3502
3503         switch (caldac_channel) {
3504         case 0:         /*  chan 0 offset */
3505                 i2c_addr = CALDAC0_I2C_ADDR;
3506                 serial_bytes[0] = OFFSET_0_2;
3507                 break;
3508         case 1:         /*  chan 1 offset */
3509                 i2c_addr = CALDAC0_I2C_ADDR;
3510                 serial_bytes[0] = OFFSET_1_3;
3511                 break;
3512         case 2:         /*  chan 2 offset */
3513                 i2c_addr = CALDAC1_I2C_ADDR;
3514                 serial_bytes[0] = OFFSET_0_2;
3515                 break;
3516         case 3:         /*  chan 3 offset */
3517                 i2c_addr = CALDAC1_I2C_ADDR;
3518                 serial_bytes[0] = OFFSET_1_3;
3519                 break;
3520         case 4:         /*  chan 0 gain */
3521                 i2c_addr = CALDAC0_I2C_ADDR;
3522                 serial_bytes[0] = GAIN_0_2;
3523                 break;
3524         case 5:         /*  chan 1 gain */
3525                 i2c_addr = CALDAC0_I2C_ADDR;
3526                 serial_bytes[0] = GAIN_1_3;
3527                 break;
3528         case 6:         /*  chan 2 gain */
3529                 i2c_addr = CALDAC1_I2C_ADDR;
3530                 serial_bytes[0] = GAIN_0_2;
3531                 break;
3532         case 7:         /*  chan 3 gain */
3533                 i2c_addr = CALDAC1_I2C_ADDR;
3534                 serial_bytes[0] = GAIN_1_3;
3535                 break;
3536         default:
3537                 dev_err(dev->class_dev, "invalid caldac channel\n");
3538                 return -1;
3539         }
3540         serial_bytes[1] = NOT_CLEAR_REGISTERS | ((value >> 8) & 0xf);
3541         serial_bytes[2] = value & 0xff;
3542         i2c_write(dev, i2c_addr, serial_bytes, 3);
3543         return 0;
3544 }
3545
3546 static void caldac_write(struct comedi_device *dev, unsigned int channel,
3547                          unsigned int value)
3548 {
3549         const struct pcidas64_board *thisboard = dev->board_ptr;
3550
3551         switch (thisboard->layout) {
3552         case LAYOUT_60XX:
3553         case LAYOUT_64XX:
3554                 caldac_8800_write(dev, channel, value);
3555                 break;
3556         case LAYOUT_4020:
3557                 caldac_i2c_write(dev, channel, value);
3558                 break;
3559         default:
3560                 break;
3561         }
3562 }
3563
3564 static int cb_pcidas64_calib_insn_write(struct comedi_device *dev,
3565                                         struct comedi_subdevice *s,
3566                                         struct comedi_insn *insn,
3567                                         unsigned int *data)
3568 {
3569         unsigned int chan = CR_CHAN(insn->chanspec);
3570
3571         /*
3572          * Programming the calib device is slow. Only write the
3573          * last data value if the value has changed.
3574          */
3575         if (insn->n) {
3576                 unsigned int val = data[insn->n - 1];
3577
3578                 if (s->readback[chan] != val) {
3579                         caldac_write(dev, chan, val);
3580                         s->readback[chan] = val;
3581                 }
3582         }
3583
3584         return insn->n;
3585 }
3586
3587 static void ad8402_write(struct comedi_device *dev, unsigned int channel,
3588                          unsigned int value)
3589 {
3590         struct pcidas64_private *devpriv = dev->private;
3591         static const int bitstream_length = 10;
3592         unsigned int bit, register_bits;
3593         unsigned int bitstream = ((channel & 0x3) << 8) | (value & 0xff);
3594         static const int ad8402_udelay = 1;
3595
3596         register_bits = SELECT_8402_64XX_BIT;
3597         udelay(ad8402_udelay);
3598         writew(register_bits, devpriv->main_iobase + CALIBRATION_REG);
3599
3600         for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
3601                 if (bitstream & bit)
3602                         register_bits |= SERIAL_DATA_IN_BIT;
3603                 else
3604                         register_bits &= ~SERIAL_DATA_IN_BIT;
3605                 udelay(ad8402_udelay);
3606                 writew(register_bits, devpriv->main_iobase + CALIBRATION_REG);
3607                 udelay(ad8402_udelay);
3608                 writew(register_bits | SERIAL_CLOCK_BIT,
3609                        devpriv->main_iobase + CALIBRATION_REG);
3610         }
3611
3612         udelay(ad8402_udelay);
3613         writew(0, devpriv->main_iobase + CALIBRATION_REG);
3614 }
3615
3616 /* for pci-das6402/16, channel 0 is analog input gain and channel 1 is offset */
3617 static int cb_pcidas64_ad8402_insn_write(struct comedi_device *dev,
3618                                          struct comedi_subdevice *s,
3619                                          struct comedi_insn *insn,
3620                                          unsigned int *data)
3621 {
3622         unsigned int chan = CR_CHAN(insn->chanspec);
3623
3624         /*
3625          * Programming the calib device is slow. Only write the
3626          * last data value if the value has changed.
3627          */
3628         if (insn->n) {
3629                 unsigned int val = data[insn->n - 1];
3630
3631                 if (s->readback[chan] != val) {
3632                         ad8402_write(dev, chan, val);
3633                         s->readback[chan] = val;
3634                 }
3635         }
3636
3637         return insn->n;
3638 }
3639
3640 static uint16_t read_eeprom(struct comedi_device *dev, uint8_t address)
3641 {
3642         struct pcidas64_private *devpriv = dev->private;
3643         static const int bitstream_length = 11;
3644         static const int read_command = 0x6;
3645         unsigned int bitstream = (read_command << 8) | address;
3646         unsigned int bit;
3647         void __iomem * const plx_control_addr =
3648                 devpriv->plx9080_iobase + PLX_CONTROL_REG;
3649         uint16_t value;
3650         static const int value_length = 16;
3651         static const int eeprom_udelay = 1;
3652
3653         udelay(eeprom_udelay);
3654         devpriv->plx_control_bits &= ~CTL_EE_CLK & ~CTL_EE_CS;
3655         /*  make sure we don't send anything to the i2c bus on 4020 */
3656         devpriv->plx_control_bits |= CTL_USERO;
3657         writel(devpriv->plx_control_bits, plx_control_addr);
3658         /*  activate serial eeprom */
3659         udelay(eeprom_udelay);
3660         devpriv->plx_control_bits |= CTL_EE_CS;
3661         writel(devpriv->plx_control_bits, plx_control_addr);
3662
3663         /*  write read command and desired memory address */
3664         for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
3665                 /*  set bit to be written */
3666                 udelay(eeprom_udelay);
3667                 if (bitstream & bit)
3668                         devpriv->plx_control_bits |= CTL_EE_W;
3669                 else
3670                         devpriv->plx_control_bits &= ~CTL_EE_W;
3671                 writel(devpriv->plx_control_bits, plx_control_addr);
3672                 /*  clock in bit */
3673                 udelay(eeprom_udelay);
3674                 devpriv->plx_control_bits |= CTL_EE_CLK;
3675                 writel(devpriv->plx_control_bits, plx_control_addr);
3676                 udelay(eeprom_udelay);
3677                 devpriv->plx_control_bits &= ~CTL_EE_CLK;
3678                 writel(devpriv->plx_control_bits, plx_control_addr);
3679         }
3680         /*  read back value from eeprom memory location */
3681         value = 0;
3682         for (bit = 1 << (value_length - 1); bit; bit >>= 1) {
3683                 /*  clock out bit */
3684                 udelay(eeprom_udelay);
3685                 devpriv->plx_control_bits |= CTL_EE_CLK;
3686                 writel(devpriv->plx_control_bits, plx_control_addr);
3687                 udelay(eeprom_udelay);
3688                 devpriv->plx_control_bits &= ~CTL_EE_CLK;
3689                 writel(devpriv->plx_control_bits, plx_control_addr);
3690                 udelay(eeprom_udelay);
3691                 if (readl(plx_control_addr) & CTL_EE_R)
3692                         value |= bit;
3693         }
3694
3695         /*  deactivate eeprom serial input */
3696         udelay(eeprom_udelay);
3697         devpriv->plx_control_bits &= ~CTL_EE_CS;
3698         writel(devpriv->plx_control_bits, plx_control_addr);
3699
3700         return value;
3701 }
3702
3703 static int eeprom_read_insn(struct comedi_device *dev,
3704                             struct comedi_subdevice *s,
3705                             struct comedi_insn *insn, unsigned int *data)
3706 {
3707         data[0] = read_eeprom(dev, CR_CHAN(insn->chanspec));
3708
3709         return 1;
3710 }
3711
3712 /* Allocate and initialize the subdevice structures.
3713  */
3714 static int setup_subdevices(struct comedi_device *dev)
3715 {
3716         const struct pcidas64_board *thisboard = dev->board_ptr;
3717         struct pcidas64_private *devpriv = dev->private;
3718         struct comedi_subdevice *s;
3719         int i;
3720         int ret;
3721
3722         ret = comedi_alloc_subdevices(dev, 10);
3723         if (ret)
3724                 return ret;
3725
3726         s = &dev->subdevices[0];
3727         /* analog input subdevice */
3728         dev->read_subdev = s;
3729         s->type = COMEDI_SUBD_AI;
3730         s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DITHER | SDF_CMD_READ;
3731         if (thisboard->layout == LAYOUT_60XX)
3732                 s->subdev_flags |= SDF_COMMON | SDF_DIFF;
3733         else if (thisboard->layout == LAYOUT_64XX)
3734                 s->subdev_flags |= SDF_DIFF;
3735         /* XXX Number of inputs in differential mode is ignored */
3736         s->n_chan = thisboard->ai_se_chans;
3737         s->len_chanlist = 0x2000;
3738         s->maxdata = (1 << thisboard->ai_bits) - 1;
3739         s->range_table = thisboard->ai_range_table;
3740         s->insn_read = ai_rinsn;
3741         s->insn_config = ai_config_insn;
3742         s->do_cmd = ai_cmd;
3743         s->do_cmdtest = ai_cmdtest;
3744         s->cancel = ai_cancel;
3745         if (thisboard->layout == LAYOUT_4020) {
3746                 uint8_t data;
3747                 /*  set adc to read from inputs
3748                  *  (not internal calibration sources) */
3749                 devpriv->i2c_cal_range_bits = adc_src_4020_bits(4);
3750                 /*  set channels to +-5 volt input ranges */
3751                 for (i = 0; i < s->n_chan; i++)
3752                         devpriv->i2c_cal_range_bits |= attenuate_bit(i);
3753                 data = devpriv->i2c_cal_range_bits;
3754                 i2c_write(dev, RANGE_CAL_I2C_ADDR, &data, sizeof(data));
3755         }
3756
3757         /* analog output subdevice */
3758         s = &dev->subdevices[1];
3759         if (thisboard->ao_nchan) {
3760                 s->type = COMEDI_SUBD_AO;
3761                 s->subdev_flags = SDF_READABLE | SDF_WRITABLE |
3762                                   SDF_GROUND | SDF_CMD_WRITE;
3763                 s->n_chan = thisboard->ao_nchan;
3764                 s->maxdata = (1 << thisboard->ao_bits) - 1;
3765                 s->range_table = thisboard->ao_range_table;
3766                 s->insn_write = ao_winsn;
3767
3768                 ret = comedi_alloc_subdev_readback(s);
3769                 if (ret)
3770                         return ret;
3771
3772                 if (ao_cmd_is_supported(thisboard)) {
3773                         dev->write_subdev = s;
3774                         s->do_cmdtest = ao_cmdtest;
3775                         s->do_cmd = ao_cmd;
3776                         s->len_chanlist = thisboard->ao_nchan;
3777                         s->cancel = ao_cancel;
3778                 }
3779         } else {
3780                 s->type = COMEDI_SUBD_UNUSED;
3781         }
3782
3783         /*  digital input */
3784         s = &dev->subdevices[2];
3785         if (thisboard->layout == LAYOUT_64XX) {
3786                 s->type = COMEDI_SUBD_DI;
3787                 s->subdev_flags = SDF_READABLE;
3788                 s->n_chan = 4;
3789                 s->maxdata = 1;
3790                 s->range_table = &range_digital;
3791                 s->insn_bits = di_rbits;
3792         } else
3793                 s->type = COMEDI_SUBD_UNUSED;
3794
3795         /*  digital output */
3796         if (thisboard->layout == LAYOUT_64XX) {
3797                 s = &dev->subdevices[3];
3798                 s->type = COMEDI_SUBD_DO;
3799                 s->subdev_flags = SDF_WRITABLE;
3800                 s->n_chan = 4;
3801                 s->maxdata = 1;
3802                 s->range_table = &range_digital;
3803                 s->insn_bits = do_wbits;
3804         } else
3805                 s->type = COMEDI_SUBD_UNUSED;
3806
3807         /* 8255 */
3808         s = &dev->subdevices[4];
3809         if (thisboard->has_8255) {
3810                 if (thisboard->layout == LAYOUT_4020) {
3811                         ret = subdev_8255_init(dev, s, dio_callback_4020,
3812                                                I8255_4020_REG);
3813                 } else {
3814                         ret = subdev_8255_mm_init(dev, s, NULL,
3815                                                   DIO_8255_OFFSET);
3816                 }
3817                 if (ret)
3818                         return ret;
3819         } else {
3820                 s->type = COMEDI_SUBD_UNUSED;
3821         }
3822
3823         /*  8 channel dio for 60xx */
3824         s = &dev->subdevices[5];
3825         if (thisboard->layout == LAYOUT_60XX) {
3826                 s->type = COMEDI_SUBD_DIO;
3827                 s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
3828                 s->n_chan = 8;
3829                 s->maxdata = 1;
3830                 s->range_table = &range_digital;
3831                 s->insn_config = dio_60xx_config_insn;
3832                 s->insn_bits = dio_60xx_wbits;
3833         } else
3834                 s->type = COMEDI_SUBD_UNUSED;
3835
3836         /*  caldac */
3837         s = &dev->subdevices[6];
3838         s->type = COMEDI_SUBD_CALIB;
3839         s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
3840         s->n_chan = 8;
3841         if (thisboard->layout == LAYOUT_4020)
3842                 s->maxdata = 0xfff;
3843         else
3844                 s->maxdata = 0xff;
3845         s->insn_write = cb_pcidas64_calib_insn_write;
3846
3847         ret = comedi_alloc_subdev_readback(s);
3848         if (ret)
3849                 return ret;
3850
3851         for (i = 0; i < s->n_chan; i++) {
3852                 caldac_write(dev, i, s->maxdata / 2);
3853                 s->readback[i] = s->maxdata / 2;
3854         }
3855
3856         /*  2 channel ad8402 potentiometer */
3857         s = &dev->subdevices[7];
3858         if (thisboard->layout == LAYOUT_64XX) {
3859                 s->type = COMEDI_SUBD_CALIB;
3860                 s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
3861                 s->n_chan = 2;
3862                 s->maxdata = 0xff;
3863                 s->insn_write = cb_pcidas64_ad8402_insn_write;
3864
3865                 ret = comedi_alloc_subdev_readback(s);
3866                 if (ret)
3867                         return ret;
3868
3869                 for (i = 0; i < s->n_chan; i++) {
3870                         ad8402_write(dev, i, s->maxdata / 2);
3871                         s->readback[i] = s->maxdata / 2;
3872                 }
3873         } else
3874                 s->type = COMEDI_SUBD_UNUSED;
3875
3876         /* serial EEPROM, if present */
3877         s = &dev->subdevices[8];
3878         if (readl(devpriv->plx9080_iobase + PLX_CONTROL_REG) & CTL_EECHK) {
3879                 s->type = COMEDI_SUBD_MEMORY;
3880                 s->subdev_flags = SDF_READABLE | SDF_INTERNAL;
3881                 s->n_chan = 128;
3882                 s->maxdata = 0xffff;
3883                 s->insn_read = eeprom_read_insn;
3884         } else
3885                 s->type = COMEDI_SUBD_UNUSED;
3886
3887         /*  user counter subd XXX */
3888         s = &dev->subdevices[9];
3889         s->type = COMEDI_SUBD_UNUSED;
3890
3891         return 0;
3892 }
3893
3894 static int auto_attach(struct comedi_device *dev,
3895                        unsigned long context)
3896 {
3897         struct pci_dev *pcidev = comedi_to_pci_dev(dev);
3898         const struct pcidas64_board *thisboard = NULL;
3899         struct pcidas64_private *devpriv;
3900         uint32_t local_range, local_decode;
3901         int retval;
3902
3903         if (context < ARRAY_SIZE(pcidas64_boards))
3904                 thisboard = &pcidas64_boards[context];
3905         if (!thisboard)
3906                 return -ENODEV;
3907         dev->board_ptr = thisboard;
3908
3909         devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
3910         if (!devpriv)
3911                 return -ENOMEM;
3912
3913         retval = comedi_pci_enable(dev);
3914         if (retval)
3915                 return retval;
3916         pci_set_master(pcidev);
3917
3918         /* Initialize dev->board_name */
3919         dev->board_name = thisboard->name;
3920
3921         devpriv->main_phys_iobase = pci_resource_start(pcidev, 2);
3922         devpriv->dio_counter_phys_iobase = pci_resource_start(pcidev, 3);
3923
3924         devpriv->plx9080_iobase = pci_ioremap_bar(pcidev, 0);
3925         devpriv->main_iobase = pci_ioremap_bar(pcidev, 2);
3926         dev->mmio = pci_ioremap_bar(pcidev, 3);
3927
3928         if (!devpriv->plx9080_iobase || !devpriv->main_iobase || !dev->mmio) {
3929                 dev_warn(dev->class_dev, "failed to remap io memory\n");
3930                 return -ENOMEM;
3931         }
3932
3933         /*  figure out what local addresses are */
3934         local_range = readl(devpriv->plx9080_iobase + PLX_LAS0RNG_REG) &
3935                       LRNG_MEM_MASK;
3936         local_decode = readl(devpriv->plx9080_iobase + PLX_LAS0MAP_REG) &
3937                        local_range & LMAP_MEM_MASK;
3938         devpriv->local0_iobase = ((uint32_t)devpriv->main_phys_iobase &
3939                                   ~local_range) | local_decode;
3940         local_range = readl(devpriv->plx9080_iobase + PLX_LAS1RNG_REG) &
3941                       LRNG_MEM_MASK;
3942         local_decode = readl(devpriv->plx9080_iobase + PLX_LAS1MAP_REG) &
3943                        local_range & LMAP_MEM_MASK;
3944         devpriv->local1_iobase = ((uint32_t)devpriv->dio_counter_phys_iobase &
3945                                   ~local_range) | local_decode;
3946
3947         retval = alloc_and_init_dma_members(dev);
3948         if (retval < 0)
3949                 return retval;
3950
3951         devpriv->hw_revision =
3952                 hw_revision(dev, readw(devpriv->main_iobase + HW_STATUS_REG));
3953         dev_dbg(dev->class_dev, "stc hardware revision %i\n",
3954                 devpriv->hw_revision);
3955         init_plx9080(dev);
3956         init_stc_registers(dev);
3957
3958         retval = request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
3959                              dev->board_name, dev);
3960         if (retval) {
3961                 dev_dbg(dev->class_dev, "unable to allocate irq %u\n",
3962                         pcidev->irq);
3963                 return retval;
3964         }
3965         dev->irq = pcidev->irq;
3966         dev_dbg(dev->class_dev, "irq %u\n", dev->irq);
3967
3968         retval = setup_subdevices(dev);
3969         if (retval < 0)
3970                 return retval;
3971
3972         return 0;
3973 }
3974
3975 static void detach(struct comedi_device *dev)
3976 {
3977         struct pcidas64_private *devpriv = dev->private;
3978
3979         if (dev->irq)
3980                 free_irq(dev->irq, dev);
3981         if (devpriv) {
3982                 if (devpriv->plx9080_iobase) {
3983                         disable_plx_interrupts(dev);
3984                         iounmap(devpriv->plx9080_iobase);
3985                 }
3986                 if (devpriv->main_iobase)
3987                         iounmap(devpriv->main_iobase);
3988                 if (dev->mmio)
3989                         iounmap(dev->mmio);
3990         }
3991         comedi_pci_disable(dev);
3992         cb_pcidas64_free_dma(dev);
3993 }
3994
3995 static struct comedi_driver cb_pcidas64_driver = {
3996         .driver_name    = "cb_pcidas64",
3997         .module         = THIS_MODULE,
3998         .auto_attach    = auto_attach,
3999         .detach         = detach,
4000 };
4001
4002 static int cb_pcidas64_pci_probe(struct pci_dev *dev,
4003                                  const struct pci_device_id *id)
4004 {
4005         return comedi_pci_auto_config(dev, &cb_pcidas64_driver,
4006                                       id->driver_data);
4007 }
4008
4009 static const struct pci_device_id cb_pcidas64_pci_table[] = {
4010         { PCI_VDEVICE(CB, 0x001d), BOARD_PCIDAS6402_16 },
4011         { PCI_VDEVICE(CB, 0x001e), BOARD_PCIDAS6402_12 },
4012         { PCI_VDEVICE(CB, 0x0035), BOARD_PCIDAS64_M1_16 },
4013         { PCI_VDEVICE(CB, 0x0036), BOARD_PCIDAS64_M2_16 },
4014         { PCI_VDEVICE(CB, 0x0037), BOARD_PCIDAS64_M3_16 },
4015         { PCI_VDEVICE(CB, 0x0052), BOARD_PCIDAS4020_12 },
4016         { PCI_VDEVICE(CB, 0x005d), BOARD_PCIDAS6023 },
4017         { PCI_VDEVICE(CB, 0x005e), BOARD_PCIDAS6025 },
4018         { PCI_VDEVICE(CB, 0x005f), BOARD_PCIDAS6030 },
4019         { PCI_VDEVICE(CB, 0x0060), BOARD_PCIDAS6031 },
4020         { PCI_VDEVICE(CB, 0x0061), BOARD_PCIDAS6032 },
4021         { PCI_VDEVICE(CB, 0x0062), BOARD_PCIDAS6033 },
4022         { PCI_VDEVICE(CB, 0x0063), BOARD_PCIDAS6034 },
4023         { PCI_VDEVICE(CB, 0x0064), BOARD_PCIDAS6035 },
4024         { PCI_VDEVICE(CB, 0x0065), BOARD_PCIDAS6040 },
4025         { PCI_VDEVICE(CB, 0x0066), BOARD_PCIDAS6052 },
4026         { PCI_VDEVICE(CB, 0x0067), BOARD_PCIDAS6070 },
4027         { PCI_VDEVICE(CB, 0x0068), BOARD_PCIDAS6071 },
4028         { PCI_VDEVICE(CB, 0x006f), BOARD_PCIDAS6036 },
4029         { PCI_VDEVICE(CB, 0x0078), BOARD_PCIDAS6013 },
4030         { PCI_VDEVICE(CB, 0x0079), BOARD_PCIDAS6014 },
4031         { 0 }
4032 };
4033 MODULE_DEVICE_TABLE(pci, cb_pcidas64_pci_table);
4034
4035 static struct pci_driver cb_pcidas64_pci_driver = {
4036         .name           = "cb_pcidas64",
4037         .id_table       = cb_pcidas64_pci_table,
4038         .probe          = cb_pcidas64_pci_probe,
4039         .remove         = comedi_pci_auto_unconfig,
4040 };
4041 module_comedi_pci_driver(cb_pcidas64_driver, cb_pcidas64_pci_driver);
4042
4043 MODULE_AUTHOR("Comedi http://www.comedi.org");
4044 MODULE_DESCRIPTION("Comedi low-level driver");
4045 MODULE_LICENSE("GPL");