drivers/scsi/lpfc/lpfc_sli.c

   1 /*******************************************************************
   2  * This file is part of the Emulex Linux Device Driver for         *
   3  * Fibre Channel Host Bus Adapters.                                *
   4  * Copyright (C) 2004-2007 Emulex.  All rights reserved.           *
   5  * EMULEX and SLI are trademarks of Emulex.                        *
   6  * www.emulex.com                                                  *
   7  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
   8  *                                                                 *
   9  * This program is free software; you can redistribute it and/or   *
  10  * modify it under the terms of version 2 of the GNU General       *
  11  * Public License as published by the Free Software Foundation.    *
  12  * This program is distributed in the hope that it will be useful. *
  13  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
  14  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
  15  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
  16  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
  17  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
  18  * more details, a copy of which can be found in the file COPYING  *
  19  * included with this package.                                     *
  20  *******************************************************************/
  21
  22 #include <linux/blkdev.h>
  23 #include <linux/pci.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/delay.h>
  26
  27 #include <scsi/scsi.h>
  28 #include <scsi/scsi_cmnd.h>
  29 #include <scsi/scsi_device.h>
  30 #include <scsi/scsi_host.h>
  31 #include <scsi/scsi_transport_fc.h>
  32
  33 #include "lpfc_hw.h"
  34 #include "lpfc_sli.h"
  35 #include "lpfc_disc.h"
  36 #include "lpfc_scsi.h"
  37 #include "lpfc.h"
  38 #include "lpfc_crtn.h"
  39 #include "lpfc_logmsg.h"
  40 #include "lpfc_compat.h"
  41
  42 /*
  43  * Define macro to log: Mailbox command x%x cannot issue Data
  44  * This allows multiple uses of lpfc_msgBlk0311
  45  * w/o perturbing log msg utility.
  46  */
  47 #define LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag) \
  48                         lpfc_printf_log(phba, \
  49                                 KERN_INFO, \
  50                                 LOG_MBOX | LOG_SLI, \
  51                                 "%d:0311 Mailbox command x%x cannot issue " \
  52                                 "Data: x%x x%x x%x\n", \
  53                                 phba->brd_no, \
  54                                 mb->mbxCommand,         \
  55                                 phba->hba_state,        \
  56                                 psli->sli_flag, \
  57                                 flag);
  58
  59
  60 /* There are only four IOCB completion types. */
  61 typedef enum _lpfc_iocb_type {
  62         LPFC_UNKNOWN_IOCB,
  63         LPFC_UNSOL_IOCB,
  64         LPFC_SOL_IOCB,
  65         LPFC_ABORT_IOCB
  66 } lpfc_iocb_type;
  67
  68 struct lpfc_iocbq *
  69 lpfc_sli_get_iocbq(struct lpfc_hba * phba)
  70 {
  71         struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
  72         struct lpfc_iocbq * iocbq = NULL;
  73
  74         list_remove_head(lpfc_iocb_list, iocbq, struct lpfc_iocbq, list);
  75         return iocbq;
  76 }
  77
  78 void
  79 lpfc_sli_release_iocbq(struct lpfc_hba * phba, struct lpfc_iocbq * iocbq)
  80 {
  81         size_t start_clean = (size_t)(&((struct lpfc_iocbq *)NULL)->iocb);
  82
  83         /*
  84          * Clean all volatile data fields, preserve iotag and node struct.
  85          */
  86         memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
  87         list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
  88 }
  89
  90 /*
  91  * Translate the iocb command to an iocb command type used to decide the final
  92  * disposition of each completed IOCB.
  93  */
  94 static lpfc_iocb_type
  95 lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
  96 {
  97         lpfc_iocb_type type = LPFC_UNKNOWN_IOCB;
  98
  99         if (iocb_cmnd > CMD_MAX_IOCB_CMD)
 100                 return 0;
 101
 102         switch (iocb_cmnd) {
 103         case CMD_XMIT_SEQUENCE_CR:
 104         case CMD_XMIT_SEQUENCE_CX:
 105         case CMD_XMIT_BCAST_CN:
 106         case CMD_XMIT_BCAST_CX:
 107         case CMD_ELS_REQUEST_CR:
 108         case CMD_ELS_REQUEST_CX:
 109         case CMD_CREATE_XRI_CR:
 110         case CMD_CREATE_XRI_CX:
 111         case CMD_GET_RPI_CN:
 112         case CMD_XMIT_ELS_RSP_CX:
 113         case CMD_GET_RPI_CR:
 114         case CMD_FCP_IWRITE_CR:
 115         case CMD_FCP_IWRITE_CX:
 116         case CMD_FCP_IREAD_CR:
 117         case CMD_FCP_IREAD_CX:
 118         case CMD_FCP_ICMND_CR:
 119         case CMD_FCP_ICMND_CX:
 120         case CMD_FCP_TSEND_CX:
 121         case CMD_FCP_TRSP_CX:
 122         case CMD_FCP_TRECEIVE_CX:
 123         case CMD_FCP_AUTO_TRSP_CX:
 124         case CMD_ADAPTER_MSG:
 125         case CMD_ADAPTER_DUMP:
 126         case CMD_XMIT_SEQUENCE64_CR:
 127         case CMD_XMIT_SEQUENCE64_CX:
 128         case CMD_XMIT_BCAST64_CN:
 129         case CMD_XMIT_BCAST64_CX:
 130         case CMD_ELS_REQUEST64_CR:
 131         case CMD_ELS_REQUEST64_CX:
 132         case CMD_FCP_IWRITE64_CR:
 133         case CMD_FCP_IWRITE64_CX:
 134         case CMD_FCP_IREAD64_CR:
 135         case CMD_FCP_IREAD64_CX:
 136         case CMD_FCP_ICMND64_CR:
 137         case CMD_FCP_ICMND64_CX:
 138         case CMD_FCP_TSEND64_CX:
 139         case CMD_FCP_TRSP64_CX:
 140         case CMD_FCP_TRECEIVE64_CX:
 141         case CMD_GEN_REQUEST64_CR:
 142         case CMD_GEN_REQUEST64_CX:
 143         case CMD_XMIT_ELS_RSP64_CX:
 144                 type = LPFC_SOL_IOCB;
 145                 break;
 146         case CMD_ABORT_XRI_CN:
 147         case CMD_ABORT_XRI_CX:
 148         case CMD_CLOSE_XRI_CN:
 149         case CMD_CLOSE_XRI_CX:
 150         case CMD_XRI_ABORTED_CX:
 151         case CMD_ABORT_MXRI64_CN:
 152                 type = LPFC_ABORT_IOCB;
 153                 break;
 154         case CMD_RCV_SEQUENCE_CX:
 155         case CMD_RCV_ELS_REQ_CX:
 156         case CMD_RCV_SEQUENCE64_CX:
 157         case CMD_RCV_ELS_REQ64_CX:
 158                 type = LPFC_UNSOL_IOCB;
 159                 break;
 160         default:
 161                 type = LPFC_UNKNOWN_IOCB;
 162                 break;
 163         }
 164
 165         return type;
 166 }
 167
 168 static int
 169 lpfc_sli_ring_map(struct lpfc_hba * phba, LPFC_MBOXQ_t *pmb)
 170 {
 171         struct lpfc_sli *psli = &phba->sli;
 172         MAILBOX_t *pmbox = &pmb->mb;
 173         int i, rc;
 174
 175         for (i = 0; i < psli->num_rings; i++) {
 176                 phba->hba_state = LPFC_INIT_MBX_CMDS;
 177                 lpfc_config_ring(phba, i, pmb);
 178                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
 179                 if (rc != MBX_SUCCESS) {
 180                         lpfc_printf_log(phba,
 181                                         KERN_ERR,
 182                                         LOG_INIT,
 183                                         "%d:0446 Adapter failed to init, "
 184                                         "mbxCmd x%x CFG_RING, mbxStatus x%x, "
 185                                         "ring %d\n",
 186                                         phba->brd_no,
 187                                         pmbox->mbxCommand,
 188                                         pmbox->mbxStatus,
 189                                         i);
 190                         phba->hba_state = LPFC_HBA_ERROR;
 191                         return -ENXIO;
 192                 }
 193         }
 194         return 0;
 195 }
 196
 197 static int
 198 lpfc_sli_ringtxcmpl_put(struct lpfc_hba * phba,
 199                         struct lpfc_sli_ring * pring, struct lpfc_iocbq * piocb)
 200 {
 201         list_add_tail(&piocb->list, &pring->txcmplq);
 202         pring->txcmplq_cnt++;
 203         if (unlikely(pring->ringno == LPFC_ELS_RING))
 204                 mod_timer(&phba->els_tmofunc,
 205                                         jiffies + HZ * (phba->fc_ratov << 1));
 206
 207         return (0);
 208 }
 209
 210 static struct lpfc_iocbq *
 211 lpfc_sli_ringtx_get(struct lpfc_hba * phba, struct lpfc_sli_ring * pring)
 212 {
 213         struct list_head *dlp;
 214         struct lpfc_iocbq *cmd_iocb;
 215
 216         dlp = &pring->txq;
 217         cmd_iocb = NULL;
 218         list_remove_head((&pring->txq), cmd_iocb,
 219                          struct lpfc_iocbq,
 220                          list);
 221         if (cmd_iocb) {
 222                 /* If the first ptr is not equal to the list header,
 223                  * deque the IOCBQ_t and return it.
 224                  */
 225                 pring->txq_cnt--;
 226         }
 227         return (cmd_iocb);
 228 }
 229
 230 static IOCB_t *
 231 lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 232 {
 233         struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
 234         uint32_t  max_cmd_idx = pring->numCiocb;
 235         IOCB_t *iocb = NULL;
 236
 237         if ((pring->next_cmdidx == pring->cmdidx) &&
 238            (++pring->next_cmdidx >= max_cmd_idx))
 239                 pring->next_cmdidx = 0;
 240
 241         if (unlikely(pring->local_getidx == pring->next_cmdidx)) {
 242
 243                 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
 244
 245                 if (unlikely(pring->local_getidx >= max_cmd_idx)) {
 246                         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 247                                         "%d:0315 Ring %d issue: portCmdGet %d "
 248                                         "is bigger then cmd ring %d\n",
 249                                         phba->brd_no, pring->ringno,
 250                                         pring->local_getidx, max_cmd_idx);
 251
 252                         phba->hba_state = LPFC_HBA_ERROR;
 253                         /*
 254                          * All error attention handlers are posted to
 255                          * worker thread
 256                          */
 257                         phba->work_ha |= HA_ERATT;
 258                         phba->work_hs = HS_FFER3;
 259                         if (phba->work_wait)
 260                                 wake_up(phba->work_wait);
 261
 262                         return NULL;
 263                 }
 264
 265                 if (pring->local_getidx == pring->next_cmdidx)
 266                         return NULL;
 267         }
 268
 269         iocb = IOCB_ENTRY(pring->cmdringaddr, pring->cmdidx);
 270
 271         return iocb;
 272 }
 273
 274 uint16_t
 275 lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocbq)
 276 {
 277         struct lpfc_iocbq ** new_arr;
 278         struct lpfc_iocbq ** old_arr;
 279         size_t new_len;
 280         struct lpfc_sli *psli = &phba->sli;
 281         uint16_t iotag;
 282
 283         spin_lock_irq(phba->host->host_lock);
 284         iotag = psli->last_iotag;
 285         if(++iotag < psli->iocbq_lookup_len) {
 286                 psli->last_iotag = iotag;
 287                 psli->iocbq_lookup[iotag] = iocbq;
 288                 spin_unlock_irq(phba->host->host_lock);
 289                 iocbq->iotag = iotag;
 290                 return iotag;
 291         }
 292         else if (psli->iocbq_lookup_len < (0xffff
 293                                            - LPFC_IOCBQ_LOOKUP_INCREMENT)) {
 294                 new_len = psli->iocbq_lookup_len + LPFC_IOCBQ_LOOKUP_INCREMENT;
 295                 spin_unlock_irq(phba->host->host_lock);
 296                 new_arr = kmalloc(new_len * sizeof (struct lpfc_iocbq *),
 297                                   GFP_KERNEL);
 298                 if (new_arr) {
 299                         memset((char *)new_arr, 0,
 300                                new_len * sizeof (struct lpfc_iocbq *));
 301                         spin_lock_irq(phba->host->host_lock);
 302                         old_arr = psli->iocbq_lookup;
 303                         if (new_len <= psli->iocbq_lookup_len) {
 304                                 /* highly unprobable case */
 305                                 kfree(new_arr);
 306                                 iotag = psli->last_iotag;
 307                                 if(++iotag < psli->iocbq_lookup_len) {
 308                                         psli->last_iotag = iotag;
 309                                         psli->iocbq_lookup[iotag] = iocbq;
 310                                         spin_unlock_irq(phba->host->host_lock);
 311                                         iocbq->iotag = iotag;
 312                                         return iotag;
 313                                 }
 314                                 spin_unlock_irq(phba->host->host_lock);
 315                                 return 0;
 316                         }
 317                         if (psli->iocbq_lookup)
 318                                 memcpy(new_arr, old_arr,
 319                                        ((psli->last_iotag  + 1) *
 320                                         sizeof (struct lpfc_iocbq *)));
 321                         psli->iocbq_lookup = new_arr;
 322                         psli->iocbq_lookup_len = new_len;
 323                         psli->last_iotag = iotag;
 324                         psli->iocbq_lookup[iotag] = iocbq;
 325                         spin_unlock_irq(phba->host->host_lock);
 326                         iocbq->iotag = iotag;
 327                         kfree(old_arr);
 328                         return iotag;
 329                 }
 330         } else
 331                 spin_unlock_irq(phba->host->host_lock);
 332
 333         lpfc_printf_log(phba, KERN_ERR,LOG_SLI,
 334                         "%d:0318 Failed to allocate IOTAG.last IOTAG is %d\n",
 335                         phba->brd_no, psli->last_iotag);
 336
 337         return 0;
 338 }
 339
 340 static void
 341 lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 342                 IOCB_t *iocb, struct lpfc_iocbq *nextiocb)
 343 {
 344         /*
 345          * Set up an iotag
 346          */
 347         nextiocb->iocb.ulpIoTag = (nextiocb->iocb_cmpl) ? nextiocb->iotag : 0;
 348
 349         /*
 350          * Issue iocb command to adapter
 351          */
 352         lpfc_sli_pcimem_bcopy(&nextiocb->iocb, iocb, sizeof (IOCB_t));
 353         wmb();
 354         pring->stats.iocb_cmd++;
 355
 356         /*
 357          * If there is no completion routine to call, we can release the
 358          * IOCB buffer back right now. For IOCBs, like QUE_RING_BUF,
 359          * that have no rsp ring completion, iocb_cmpl MUST be NULL.
 360          */
 361         if (nextiocb->iocb_cmpl)
 362                 lpfc_sli_ringtxcmpl_put(phba, pring, nextiocb);
 363         else
 364                 lpfc_sli_release_iocbq(phba, nextiocb);
 365
 366         /*
 367          * Let the HBA know what IOCB slot will be the next one the
 368          * driver will put a command into.
 369          */
 370         pring->cmdidx = pring->next_cmdidx;
 371         writel(pring->cmdidx, phba->MBslimaddr
 372                + (SLIMOFF + (pring->ringno * 2)) * 4);
 373 }
 374
 375 static void
 376 lpfc_sli_update_full_ring(struct lpfc_hba * phba,
 377                           struct lpfc_sli_ring *pring)
 378 {
 379         int ringno = pring->ringno;
 380
 381         pring->flag |= LPFC_CALL_RING_AVAILABLE;
 382
 383         wmb();
 384
 385         /*
 386          * Set ring 'ringno' to SET R0CE_REQ in Chip Att register.
 387          * The HBA will tell us when an IOCB entry is available.
 388          */
 389         writel((CA_R0ATT|CA_R0CE_REQ) << (ringno*4), phba->CAregaddr);
 390         readl(phba->CAregaddr); /* flush */
 391
 392         pring->stats.iocb_cmd_full++;
 393 }
 394
 395 static void
 396 lpfc_sli_update_ring(struct lpfc_hba * phba,
 397                      struct lpfc_sli_ring *pring)
 398 {
 399         int ringno = pring->ringno;
 400
 401         /*
 402          * Tell the HBA that there is work to do in this ring.
 403          */
 404         wmb();
 405         writel(CA_R0ATT << (ringno * 4), phba->CAregaddr);
 406         readl(phba->CAregaddr); /* flush */
 407 }
 408
 409 static void
 410 lpfc_sli_resume_iocb(struct lpfc_hba * phba, struct lpfc_sli_ring * pring)
 411 {
 412         IOCB_t *iocb;
 413         struct lpfc_iocbq *nextiocb;
 414
 415         /*
 416          * Check to see if:
 417          *  (a) there is anything on the txq to send
 418          *  (b) link is up
 419          *  (c) link attention events can be processed (fcp ring only)
 420          *  (d) IOCB processing is not blocked by the outstanding mbox command.
 421          */
 422         if (pring->txq_cnt &&
 423             (phba->hba_state > LPFC_LINK_DOWN) &&
 424             (pring->ringno != phba->sli.fcp_ring ||
 425              phba->sli.sli_flag & LPFC_PROCESS_LA) &&
 426             !(pring->flag & LPFC_STOP_IOCB_MBX)) {
 427
 428                 while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
 429                        (nextiocb = lpfc_sli_ringtx_get(phba, pring)))
 430                         lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
 431
 432                 if (iocb)
 433                         lpfc_sli_update_ring(phba, pring);
 434                 else
 435                         lpfc_sli_update_full_ring(phba, pring);
 436         }
 437
 438         return;
 439 }
 440
 441 /* lpfc_sli_turn_on_ring is only called by lpfc_sli_handle_mb_event below */
 442 static void
 443 lpfc_sli_turn_on_ring(struct lpfc_hba * phba, int ringno)
 444 {
 445         struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[ringno];
 446
 447         /* If the ring is active, flag it */
 448         if (phba->sli.ring[ringno].cmdringaddr) {
 449                 if (phba->sli.ring[ringno].flag & LPFC_STOP_IOCB_MBX) {
 450                         phba->sli.ring[ringno].flag &= ~LPFC_STOP_IOCB_MBX;
 451                         /*
 452                          * Force update of the local copy of cmdGetInx
 453                          */
 454                         phba->sli.ring[ringno].local_getidx
 455                                 = le32_to_cpu(pgp->cmdGetInx);
 456                         spin_lock_irq(phba->host->host_lock);
 457                         lpfc_sli_resume_iocb(phba, &phba->sli.ring[ringno]);
 458                         spin_unlock_irq(phba->host->host_lock);
 459                 }
 460         }
 461 }
 462
 463 static int
 464 lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
 465 {
 466         uint8_t ret;
 467
 468         switch (mbxCommand) {
 469         case MBX_LOAD_SM:
 470         case MBX_READ_NV:
 471         case MBX_WRITE_NV:
 472         case MBX_RUN_BIU_DIAG:
 473         case MBX_INIT_LINK:
 474         case MBX_DOWN_LINK:
 475         case MBX_CONFIG_LINK:
 476         case MBX_CONFIG_RING:
 477         case MBX_RESET_RING:
 478         case MBX_READ_CONFIG:
 479         case MBX_READ_RCONFIG:
 480         case MBX_READ_SPARM:
 481         case MBX_READ_STATUS:
 482         case MBX_READ_RPI:
 483         case MBX_READ_XRI:
 484         case MBX_READ_REV:
 485         case MBX_READ_LNK_STAT:
 486         case MBX_REG_LOGIN:
 487         case MBX_UNREG_LOGIN:
 488         case MBX_READ_LA:
 489         case MBX_CLEAR_LA:
 490         case MBX_DUMP_MEMORY:
 491         case MBX_DUMP_CONTEXT:
 492         case MBX_RUN_DIAGS:
 493         case MBX_RESTART:
 494         case MBX_UPDATE_CFG:
 495         case MBX_DOWN_LOAD:
 496         case MBX_DEL_LD_ENTRY:
 497         case MBX_RUN_PROGRAM:
 498         case MBX_SET_MASK:
 499         case MBX_SET_SLIM:
 500         case MBX_UNREG_D_ID:
 501         case MBX_KILL_BOARD:
 502         case MBX_CONFIG_FARP:
 503         case MBX_BEACON:
 504         case MBX_LOAD_AREA:
 505         case MBX_RUN_BIU_DIAG64:
 506         case MBX_CONFIG_PORT:
 507         case MBX_READ_SPARM64:
 508         case MBX_READ_RPI64:
 509         case MBX_REG_LOGIN64:
 510         case MBX_READ_LA64:
 511         case MBX_FLASH_WR_ULA:
 512         case MBX_SET_DEBUG:
 513         case MBX_LOAD_EXP_ROM:
 514                 ret = mbxCommand;
 515                 break;
 516         default:
 517                 ret = MBX_SHUTDOWN;
 518                 break;
 519         }
 520         return (ret);
 521 }
 522 static void
 523 lpfc_sli_wake_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
 524 {
 525         wait_queue_head_t *pdone_q;
 526
 527         /*
 528          * If pdone_q is empty, the driver thread gave up waiting and
 529          * continued running.
 530          */
 531         pmboxq->mbox_flag |= LPFC_MBX_WAKE;
 532         pdone_q = (wait_queue_head_t *) pmboxq->context1;
 533         if (pdone_q)
 534                 wake_up_interruptible(pdone_q);
 535         return;
 536 }
 537
 538 void
 539 lpfc_sli_def_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 540 {
 541         struct lpfc_dmabuf *mp;
 542         uint16_t rpi;
 543         int rc;
 544
 545         mp = (struct lpfc_dmabuf *) (pmb->context1);
 546
 547         if (mp) {
 548                 lpfc_mbuf_free(phba, mp->virt, mp->phys);
 549                 kfree(mp);
 550         }
 551
 552         /*
 553          * If a REG_LOGIN succeeded  after node is destroyed or node
 554          * is in re-discovery driver need to cleanup the RPI.
 555          */
 556         if (!(phba->fc_flag & FC_UNLOADING) &&
 557                 (pmb->mb.mbxCommand == MBX_REG_LOGIN64) &&
 558                 (!pmb->mb.mbxStatus)) {
 559
 560                 rpi = pmb->mb.un.varWords[0];
 561                 lpfc_unreg_login(phba, rpi, pmb);
 562                 pmb->mbox_cmpl=lpfc_sli_def_mbox_cmpl;
 563                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
 564                 if (rc != MBX_NOT_FINISHED)
 565                         return;
 566         }
 567
 568         mempool_free( pmb, phba->mbox_mem_pool);
 569         return;
 570 }
 571
 572 int
 573 lpfc_sli_handle_mb_event(struct lpfc_hba * phba)
 574 {
 575         MAILBOX_t *mbox;
 576         MAILBOX_t *pmbox;
 577         LPFC_MBOXQ_t *pmb;
 578         struct lpfc_sli *psli;
 579         int i, rc;
 580         uint32_t process_next;
 581
 582         psli = &phba->sli;
 583         /* We should only get here if we are in SLI2 mode */
 584         if (!(phba->sli.sli_flag & LPFC_SLI2_ACTIVE)) {
 585                 return (1);
 586         }
 587
 588         phba->sli.slistat.mbox_event++;
 589
 590         /* Get a Mailbox buffer to setup mailbox commands for callback */
 591         if ((pmb = phba->sli.mbox_active)) {
 592                 pmbox = &pmb->mb;
 593                 mbox = &phba->slim2p->mbx;
 594
 595                 /* First check out the status word */
 596                 lpfc_sli_pcimem_bcopy(mbox, pmbox, sizeof (uint32_t));
 597
 598                 /* Sanity check to ensure the host owns the mailbox */
 599                 if (pmbox->mbxOwner != OWN_HOST) {
 600                         /* Lets try for a while */
 601                         for (i = 0; i < 10240; i++) {
 602                                 /* First copy command data */
 603                                 lpfc_sli_pcimem_bcopy(mbox, pmbox,
 604                                                         sizeof (uint32_t));
 605                                 if (pmbox->mbxOwner == OWN_HOST)
 606                                         goto mbout;
 607                         }
 608                         /* Stray Mailbox Interrupt, mbxCommand <cmd> mbxStatus
 609                            <status> */
 610                         lpfc_printf_log(phba,
 611                                         KERN_WARNING,
 612                                         LOG_MBOX | LOG_SLI,
 613                                         "%d:0304 Stray Mailbox Interrupt "
 614                                         "mbxCommand x%x mbxStatus x%x\n",
 615                                         phba->brd_no,
 616                                         pmbox->mbxCommand,
 617                                         pmbox->mbxStatus);
 618
 619                         spin_lock_irq(phba->host->host_lock);
 620                         phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE;
 621                         spin_unlock_irq(phba->host->host_lock);
 622                         return (1);
 623                 }
 624
 625               mbout:
 626                 del_timer_sync(&phba->sli.mbox_tmo);
 627                 phba->work_hba_events &= ~WORKER_MBOX_TMO;
 628
 629                 /*
 630                  * It is a fatal error if unknown mbox command completion.
 631                  */
 632                 if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) ==
 633                     MBX_SHUTDOWN) {
 634
 635                         /* Unknow mailbox command compl */
 636                         lpfc_printf_log(phba,
 637                                 KERN_ERR,
 638                                 LOG_MBOX | LOG_SLI,
 639                                 "%d:0323 Unknown Mailbox command %x Cmpl\n",
 640                                 phba->brd_no,
 641                                 pmbox->mbxCommand);
 642                         phba->hba_state = LPFC_HBA_ERROR;
 643                         phba->work_hs = HS_FFER3;
 644                         lpfc_handle_eratt(phba);
 645                         return (0);
 646                 }
 647
 648                 phba->sli.mbox_active = NULL;
 649                 if (pmbox->mbxStatus) {
 650                         phba->sli.slistat.mbox_stat_err++;
 651                         if (pmbox->mbxStatus == MBXERR_NO_RESOURCES) {
 652                                 /* Mbox cmd cmpl error - RETRYing */
 653                                 lpfc_printf_log(phba,
 654                                         KERN_INFO,
 655                                         LOG_MBOX | LOG_SLI,
 656                                         "%d:0305 Mbox cmd cmpl error - "
 657                                         "RETRYing Data: x%x x%x x%x x%x\n",
 658                                         phba->brd_no,
 659                                         pmbox->mbxCommand,
 660                                         pmbox->mbxStatus,
 661                                         pmbox->un.varWords[0],
 662                                         phba->hba_state);
 663                                 pmbox->mbxStatus = 0;
 664                                 pmbox->mbxOwner = OWN_HOST;
 665                                 spin_lock_irq(phba->host->host_lock);
 666                                 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 667                                 spin_unlock_irq(phba->host->host_lock);
 668                                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
 669                                 if (rc == MBX_SUCCESS)
 670                                         return (0);
 671                         }
 672                 }
 673
 674                 /* Mailbox cmd <cmd> Cmpl <cmpl> */
 675                 lpfc_printf_log(phba,
 676                                 KERN_INFO,
 677                                 LOG_MBOX | LOG_SLI,
 678                                 "%d:0307 Mailbox cmd x%x Cmpl x%p "
 679                                 "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
 680                                 phba->brd_no,
 681                                 pmbox->mbxCommand,
 682                                 pmb->mbox_cmpl,
 683                                 *((uint32_t *) pmbox),
 684                                 pmbox->un.varWords[0],
 685                                 pmbox->un.varWords[1],
 686                                 pmbox->un.varWords[2],
 687                                 pmbox->un.varWords[3],
 688                                 pmbox->un.varWords[4],
 689                                 pmbox->un.varWords[5],
 690                                 pmbox->un.varWords[6],
 691                                 pmbox->un.varWords[7]);
 692
 693                 if (pmb->mbox_cmpl) {
 694                         lpfc_sli_pcimem_bcopy(mbox, pmbox, MAILBOX_CMD_SIZE);
 695                         pmb->mbox_cmpl(phba,pmb);
 696                 }
 697         }
 698
 699
 700         do {
 701                 process_next = 0;       /* by default don't loop */
 702                 spin_lock_irq(phba->host->host_lock);
 703                 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 704
 705                 /* Process next mailbox command if there is one */
 706                 if ((pmb = lpfc_mbox_get(phba))) {
 707                         spin_unlock_irq(phba->host->host_lock);
 708                         rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
 709                         if (rc == MBX_NOT_FINISHED) {
 710                                 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
 711                                 pmb->mbox_cmpl(phba,pmb);
 712                                 process_next = 1;
 713                                 continue;       /* loop back */
 714                         }
 715                 } else {
 716                         spin_unlock_irq(phba->host->host_lock);
 717                         /* Turn on IOCB processing */
 718                         for (i = 0; i < phba->sli.num_rings; i++)
 719                                 lpfc_sli_turn_on_ring(phba, i);
 720                 }
 721
 722         } while (process_next);
 723
 724         return (0);
 725 }
 726 static int
 727 lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 728                             struct lpfc_iocbq *saveq)
 729 {
 730         IOCB_t           * irsp;
 731         WORD5            * w5p;
 732         uint32_t           Rctl, Type;
 733         uint32_t           match, i;
 734
 735         match = 0;
 736         irsp = &(saveq->iocb);
 737         if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX)
 738             || (irsp->ulpCommand == CMD_RCV_ELS_REQ_CX)) {
 739                 Rctl = FC_ELS_REQ;
 740                 Type = FC_ELS_DATA;
 741         } else {
 742                 w5p =
 743                     (WORD5 *) & (saveq->iocb.un.
 744                                  ulpWord[5]);
 745                 Rctl = w5p->hcsw.Rctl;
 746                 Type = w5p->hcsw.Type;
 747
 748                 /* Firmware Workaround */
 749                 if ((Rctl == 0) && (pring->ringno == LPFC_ELS_RING) &&
 750                         (irsp->ulpCommand == CMD_RCV_SEQUENCE64_CX)) {
 751                         Rctl = FC_ELS_REQ;
 752                         Type = FC_ELS_DATA;
 753                         w5p->hcsw.Rctl = Rctl;
 754                         w5p->hcsw.Type = Type;
 755                 }
 756         }
 757         /* unSolicited Responses */
 758         if (pring->prt[0].profile) {
 759                 if (pring->prt[0].lpfc_sli_rcv_unsol_event)
 760                         (pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
 761                                                                         saveq);
 762                 match = 1;
 763         } else {
 764                 /* We must search, based on rctl / type
 765                    for the right routine */
 766                 for (i = 0; i < pring->num_mask;
 767                      i++) {
 768                         if ((pring->prt[i].rctl ==
 769                              Rctl)
 770                             && (pring->prt[i].
 771                                 type == Type)) {
 772                                 if (pring->prt[i].lpfc_sli_rcv_unsol_event)
 773                                         (pring->prt[i].lpfc_sli_rcv_unsol_event)
 774                                                         (phba, pring, saveq);
 775                                 match = 1;
 776                                 break;
 777                         }
 778                 }
 779         }
 780         if (match == 0) {
 781                 /* Unexpected Rctl / Type received */
 782                 /* Ring <ringno> handler: unexpected
 783                    Rctl <Rctl> Type <Type> received */
 784                 lpfc_printf_log(phba,
 785                                 KERN_WARNING,
 786                                 LOG_SLI,
 787                                 "%d:0313 Ring %d handler: unexpected Rctl x%x "
 788                                 "Type x%x received \n",
 789                                 phba->brd_no,
 790                                 pring->ringno,
 791                                 Rctl,
 792                                 Type);
 793         }
 794         return(1);
 795 }
 796
 797 static struct lpfc_iocbq *
 798 lpfc_sli_iocbq_lookup(struct lpfc_hba * phba,
 799                       struct lpfc_sli_ring * pring,
 800                       struct lpfc_iocbq * prspiocb)
 801 {
 802         struct lpfc_iocbq *cmd_iocb = NULL;
 803         uint16_t iotag;
 804
 805         iotag = prspiocb->iocb.ulpIoTag;
 806
 807         if (iotag != 0 && iotag <= phba->sli.last_iotag) {
 808                 cmd_iocb = phba->sli.iocbq_lookup[iotag];
 809                 list_del(&cmd_iocb->list);
 810                 pring->txcmplq_cnt--;
 811                 return cmd_iocb;
 812         }
 813
 814         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 815                         "%d:0317 iotag x%x is out off "
 816                         "range: max iotag x%x wd0 x%x\n",
 817                         phba->brd_no, iotag,
 818                         phba->sli.last_iotag,
 819                         *(((uint32_t *) &prspiocb->iocb) + 7));
 820         return NULL;
 821 }
 822
 823 static int
 824 lpfc_sli_process_sol_iocb(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
 825                           struct lpfc_iocbq *saveq)
 826 {
 827         struct lpfc_iocbq * cmdiocbp;
 828         int rc = 1;
 829         unsigned long iflag;
 830
 831         /* Based on the iotag field, get the cmd IOCB from the txcmplq */
 832         spin_lock_irqsave(phba->host->host_lock, iflag);
 833         cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring, saveq);
 834         if (cmdiocbp) {
 835                 if (cmdiocbp->iocb_cmpl) {
 836                         /*
 837                          * Post all ELS completions to the worker thread.
 838                          * All other are passed to the completion callback.
 839                          */
 840                         if (pring->ringno == LPFC_ELS_RING) {
 841                                 if (cmdiocbp->iocb_flag & LPFC_DRIVER_ABORTED) {
 842                                         cmdiocbp->iocb_flag &=
 843                                                 ~LPFC_DRIVER_ABORTED;
 844                                         saveq->iocb.ulpStatus =
 845                                                 IOSTAT_LOCAL_REJECT;
 846                                         saveq->iocb.un.ulpWord[4] =
 847                                                 IOERR_SLI_ABORTED;
 848                                 }
 849                                 spin_unlock_irqrestore(phba->host->host_lock,
 850                                                        iflag);
 851                                 (cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
 852                                 spin_lock_irqsave(phba->host->host_lock, iflag);
 853                         }
 854                         else {
 855                                 spin_unlock_irqrestore(phba->host->host_lock,
 856                                                        iflag);
 857                                 (cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
 858                                 spin_lock_irqsave(phba->host->host_lock, iflag);
 859                         }
 860                 } else
 861                         lpfc_sli_release_iocbq(phba, cmdiocbp);
 862         } else {
 863                 /*
 864                  * Unknown initiating command based on the response iotag.
 865                  * This could be the case on the ELS ring because of
 866                  * lpfc_els_abort().
 867                  */
 868                 if (pring->ringno != LPFC_ELS_RING) {
 869                         /*
 870                          * Ring <ringno> handler: unexpected completion IoTag
 871                          * <IoTag>
 872                          */
 873                         lpfc_printf_log(phba,
 874                                 KERN_WARNING,
 875                                 LOG_SLI,
 876                                 "%d:0322 Ring %d handler: unexpected "
 877                                 "completion IoTag x%x Data: x%x x%x x%x x%x\n",
 878                                 phba->brd_no,
 879                                 pring->ringno,
 880                                 saveq->iocb.ulpIoTag,
 881                                 saveq->iocb.ulpStatus,
 882                                 saveq->iocb.un.ulpWord[4],
 883                                 saveq->iocb.ulpCommand,
 884                                 saveq->iocb.ulpContext);
 885                 }
 886         }
 887
 888         spin_unlock_irqrestore(phba->host->host_lock, iflag);
 889         return rc;
 890 }
 891
 892 static void lpfc_sli_rsp_pointers_error(struct lpfc_hba * phba,
 893                                         struct lpfc_sli_ring * pring)
 894 {
 895         struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
 896         /*
 897          * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
 898          * rsp ring <portRspMax>
 899          */
 900         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 901                         "%d:0312 Ring %d handler: portRspPut %d "
 902                         "is bigger then rsp ring %d\n",
 903                         phba->brd_no, pring->ringno,
 904                         le32_to_cpu(pgp->rspPutInx),
 905                         pring->numRiocb);
 906
 907         phba->hba_state = LPFC_HBA_ERROR;
 908
 909         /*
 910          * All error attention handlers are posted to
 911          * worker thread
 912          */
 913         phba->work_ha |= HA_ERATT;
 914         phba->work_hs = HS_FFER3;
 915         if (phba->work_wait)
 916                 wake_up(phba->work_wait);
 917
 918         return;
 919 }
 920
 921 void lpfc_sli_poll_fcp_ring(struct lpfc_hba * phba)
 922 {
 923         struct lpfc_sli      * psli   = &phba->sli;
 924         struct lpfc_sli_ring * pring = &psli->ring[LPFC_FCP_RING];
 925         IOCB_t *irsp = NULL;
 926         IOCB_t *entry = NULL;
 927         struct lpfc_iocbq *cmdiocbq = NULL;
 928         struct lpfc_iocbq rspiocbq;
 929         struct lpfc_pgp *pgp;
 930         uint32_t status;
 931         uint32_t portRspPut, portRspMax;
 932         int type;
 933         uint32_t rsp_cmpl = 0;
 934         void __iomem *to_slim;
 935         uint32_t ha_copy;
 936
 937         pring->stats.iocb_event++;
 938
 939         /* The driver assumes SLI-2 mode */
 940         pgp =  &phba->slim2p->mbx.us.s2.port[pring->ringno];
 941
 942         /*
 943          * The next available response entry should never exceed the maximum
 944          * entries.  If it does, treat it as an adapter hardware error.
 945          */
 946         portRspMax = pring->numRiocb;
 947         portRspPut = le32_to_cpu(pgp->rspPutInx);
 948         if (unlikely(portRspPut >= portRspMax)) {
 949                 lpfc_sli_rsp_pointers_error(phba, pring);
 950                 return;
 951         }
 952
 953         rmb();
 954         while (pring->rspidx != portRspPut) {
 955
 956                 entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
 957
 958                 if (++pring->rspidx >= portRspMax)
 959                         pring->rspidx = 0;
 960
 961                 lpfc_sli_pcimem_bcopy((uint32_t *) entry,
 962                                       (uint32_t *) &rspiocbq.iocb,
 963                                       sizeof (IOCB_t));
 964                 irsp = &rspiocbq.iocb;
 965                 type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
 966                 pring->stats.iocb_rsp++;
 967                 rsp_cmpl++;
 968
 969                 if (unlikely(irsp->ulpStatus)) {
 970                         /* Rsp ring <ringno> error: IOCB */
 971                         lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 972                                         "%d:0326 Rsp Ring %d error: IOCB Data: "
 973                                         "x%x x%x x%x x%x x%x x%x x%x x%x\n",
 974                                         phba->brd_no, pring->ringno,
 975                                         irsp->un.ulpWord[0],
 976                                         irsp->un.ulpWord[1],
 977                                         irsp->un.ulpWord[2],
 978                                         irsp->un.ulpWord[3],
 979                                         irsp->un.ulpWord[4],
 980                                         irsp->un.ulpWord[5],
 981                                         *(((uint32_t *) irsp) + 6),
 982                                         *(((uint32_t *) irsp) + 7));
 983                 }
 984
 985                 switch (type) {
 986                 case LPFC_ABORT_IOCB:
 987                 case LPFC_SOL_IOCB:
 988                         /*
 989                          * Idle exchange closed via ABTS from port.  No iocb
 990                          * resources need to be recovered.
 991                          */
 992                         if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
 993                                 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
 994                                                 "%d:0314 IOCB cmd 0x%x"
 995                                                 " processed. Skipping"
 996                                                 " completion", phba->brd_no,
 997                                                 irsp->ulpCommand);
 998                                 break;
 999                         }
1000
1001                         cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
1002                                                          &rspiocbq);
1003                         if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
1004                                 (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
1005                                                       &rspiocbq);
1006                         }
1007                         break;
1008                 default:
1009                         if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
1010                                 char adaptermsg[LPFC_MAX_ADPTMSG];
1011                                 memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
1012                                 memcpy(&adaptermsg[0], (uint8_t *) irsp,
1013                                        MAX_MSG_DATA);
1014                                 dev_warn(&((phba->pcidev)->dev), "lpfc%d: %s",
1015                                          phba->brd_no, adaptermsg);
1016                         } else {
1017                                 /* Unknown IOCB command */
1018                                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
1019                                                 "%d:0321 Unknown IOCB command "
1020                                                 "Data: x%x, x%x x%x x%x x%x\n",
1021                                                 phba->brd_no, type,
1022                                                 irsp->ulpCommand,
1023                                                 irsp->ulpStatus,
1024                                                 irsp->ulpIoTag,
1025                                                 irsp->ulpContext);
1026                         }
1027                         break;
1028                 }
1029
1030                 /*
1031                  * The response IOCB has been processed.  Update the ring
1032                  * pointer in SLIM.  If the port response put pointer has not
1033                  * been updated, sync the pgp->rspPutInx and fetch the new port
1034                  * response put pointer.
1035                  */
1036                 to_slim = phba->MBslimaddr +
1037                         (SLIMOFF + (pring->ringno * 2) + 1) * 4;
1038                 writeb(pring->rspidx, to_slim);
1039
1040                 if (pring->rspidx == portRspPut)
1041                         portRspPut = le32_to_cpu(pgp->rspPutInx);
1042         }
1043
1044         ha_copy = readl(phba->HAregaddr);
1045         ha_copy >>= (LPFC_FCP_RING * 4);
1046
1047         if ((rsp_cmpl > 0) && (ha_copy & HA_R0RE_REQ)) {
1048                 pring->stats.iocb_rsp_full++;
1049                 status = ((CA_R0ATT | CA_R0RE_RSP) << (LPFC_FCP_RING * 4));
1050                 writel(status, phba->CAregaddr);
1051                 readl(phba->CAregaddr);
1052         }
1053         if ((ha_copy & HA_R0CE_RSP) &&
1054             (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
1055                 pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
1056                 pring->stats.iocb_cmd_empty++;
1057
1058                 /* Force update of the local copy of cmdGetInx */
1059                 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
1060                 lpfc_sli_resume_iocb(phba, pring);
1061
1062                 if ((pring->lpfc_sli_cmd_available))
1063                         (pring->lpfc_sli_cmd_available) (phba, pring);
1064
1065         }
1066
1067         return;
1068 }
1069
1070 /*
1071  * This routine presumes LPFC_FCP_RING handling and doesn't bother
1072  * to check it explicitly.
1073  */
1074 static int
1075 lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba,
1076                                 struct lpfc_sli_ring * pring, uint32_t mask)
1077 {
1078         struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
1079         IOCB_t *irsp = NULL;
1080         IOCB_t *entry = NULL;
1081         struct lpfc_iocbq *cmdiocbq = NULL;
1082         struct lpfc_iocbq rspiocbq;
1083         uint32_t status;
1084         uint32_t portRspPut, portRspMax;
1085         int rc = 1;
1086         lpfc_iocb_type type;
1087         unsigned long iflag;
1088         uint32_t rsp_cmpl = 0;
1089         void __iomem  *to_slim;
1090
1091         spin_lock_irqsave(phba->host->host_lock, iflag);
1092         pring->stats.iocb_event++;
1093
1094         /*
1095          * The next available response entry should never exceed the maximum
1096          * entries.  If it does, treat it as an adapter hardware error.
1097          */
1098         portRspMax = pring->numRiocb;
1099         portRspPut = le32_to_cpu(pgp->rspPutInx);
1100         if (unlikely(portRspPut >= portRspMax)) {
1101                 lpfc_sli_rsp_pointers_error(phba, pring);
1102                 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1103                 return 1;
1104         }
1105
1106         rmb();
1107         while (pring->rspidx != portRspPut) {
1108                 /*
1109                  * Fetch an entry off the ring and copy it into a local data
1110                  * structure.  The copy involves a byte-swap since the
1111                  * network byte order and pci byte orders are different.
1112                  */
1113                 entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
1114
1115                 if (++pring->rspidx >= portRspMax)
1116                         pring->rspidx = 0;
1117
1118                 lpfc_sli_pcimem_bcopy((uint32_t *) entry,
1119                                       (uint32_t *) &rspiocbq.iocb,
1120                                       sizeof (IOCB_t));
1121                 INIT_LIST_HEAD(&(rspiocbq.list));
1122                 irsp = &rspiocbq.iocb;
1123
1124                 type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
1125                 pring->stats.iocb_rsp++;
1126                 rsp_cmpl++;
1127
1128                 if (unlikely(irsp->ulpStatus)) {
1129                         /* Rsp ring <ringno> error: IOCB */
1130                         lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
1131                                 "%d:0336 Rsp Ring %d error: IOCB Data: "
1132                                 "x%x x%x x%x x%x x%x x%x x%x x%x\n",
1133                                 phba->brd_no, pring->ringno,
1134                                 irsp->un.ulpWord[0], irsp->un.ulpWord[1],
1135                                 irsp->un.ulpWord[2], irsp->un.ulpWord[3],
1136                                 irsp->un.ulpWord[4], irsp->un.ulpWord[5],
1137                                 *(((uint32_t *) irsp) + 6),
1138                                 *(((uint32_t *) irsp) + 7));
1139                 }
1140
1141                 switch (type) {
1142                 case LPFC_ABORT_IOCB:
1143                 case LPFC_SOL_IOCB:
1144                         /*
1145                          * Idle exchange closed via ABTS from port.  No iocb
1146                          * resources need to be recovered.
1147                          */
1148                         if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
1149                                 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
1150                                                 "%d:0333 IOCB cmd 0x%x"
1151                                                 " processed. Skipping"
1152                                                 " completion\n", phba->brd_no,
1153                                                 irsp->ulpCommand);
1154                                 break;
1155                         }
1156
1157                         cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
1158                                                          &rspiocbq);
1159                         if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
1160                                 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
1161                                         (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
1162                                                               &rspiocbq);
1163                                 } else {
1164                                         spin_unlock_irqrestore(
1165                                                 phba->host->host_lock, iflag);
1166                                         (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
1167                                                               &rspiocbq);
1168                                         spin_lock_irqsave(phba->host->host_lock,
1169                                                           iflag);
1170                                 }
1171                         }
1172                         break;
1173                 case LPFC_UNSOL_IOCB:
1174                         spin_unlock_irqrestore(phba->host->host_lock, iflag);
1175                         lpfc_sli_process_unsol_iocb(phba, pring, &rspiocbq);
1176                         spin_lock_irqsave(phba->host->host_lock, iflag);
1177                         break;
1178                 default:
1179                         if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
1180                                 char adaptermsg[LPFC_MAX_ADPTMSG];
1181                                 memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
1182                                 memcpy(&adaptermsg[0], (uint8_t *) irsp,
1183                                        MAX_MSG_DATA);
1184                                 dev_warn(&((phba->pcidev)->dev), "lpfc%d: %s",
1185                                          phba->brd_no, adaptermsg);
1186                         } else {
1187                                 /* Unknown IOCB command */
1188                                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
1189                                         "%d:0334 Unknown IOCB command "
1190                                         "Data: x%x, x%x x%x x%x x%x\n",
1191                                         phba->brd_no, type, irsp->ulpCommand,
1192                                         irsp->ulpStatus, irsp->ulpIoTag,
1193                                         irsp->ulpContext);
1194                         }
1195                         break;
1196                 }
1197
1198                 /*
1199                  * The response IOCB has been processed.  Update the ring
1200                  * pointer in SLIM.  If the port response put pointer has not
1201                  * been updated, sync the pgp->rspPutInx and fetch the new port
1202                  * response put pointer.
1203                  */
1204                 to_slim = phba->MBslimaddr +
1205                         (SLIMOFF + (pring->ringno * 2) + 1) * 4;
1206                 writel(pring->rspidx, to_slim);
1207
1208                 if (pring->rspidx == portRspPut)
1209                         portRspPut = le32_to_cpu(pgp->rspPutInx);
1210         }
1211
1212         if ((rsp_cmpl > 0) && (mask & HA_R0RE_REQ)) {
1213                 pring->stats.iocb_rsp_full++;
1214                 status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
1215                 writel(status, phba->CAregaddr);
1216                 readl(phba->CAregaddr);
1217         }
1218         if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
1219                 pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
1220                 pring->stats.iocb_cmd_empty++;
1221
1222                 /* Force update of the local copy of cmdGetInx */
1223                 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
1224                 lpfc_sli_resume_iocb(phba, pring);
1225
1226                 if ((pring->lpfc_sli_cmd_available))
1227                         (pring->lpfc_sli_cmd_available) (phba, pring);
1228
1229         }
1230
1231         spin_unlock_irqrestore(phba->host->host_lock, iflag);
1232         return rc;
1233 }
1234
1235
1236 int
1237 lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba,
1238                            struct lpfc_sli_ring * pring, uint32_t mask)
1239 {
1240         IOCB_t *entry;
1241         IOCB_t *irsp = NULL;
1242         struct lpfc_iocbq *rspiocbp = NULL;
1243         struct lpfc_iocbq *next_iocb;
1244         struct lpfc_iocbq *cmdiocbp;
1245         struct lpfc_iocbq *saveq;
1246         struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
1247         uint8_t iocb_cmd_type;
1248         lpfc_iocb_type type;
1249         uint32_t status, free_saveq;
1250         uint32_t portRspPut, portRspMax;
1251         int rc = 1;
1252         unsigned long iflag;
1253         void __iomem  *to_slim;
1254
1255         spin_lock_irqsave(phba->host->host_lock, iflag);
1256         pring->stats.iocb_event++;
1257
1258         /*
1259          * The next available response entry should never exceed the maximum
1260          * entries.  If it does, treat it as an adapter hardware error.
1261          */
1262         portRspMax = pring->numRiocb;
1263         portRspPut = le32_to_cpu(pgp->rspPutInx);
1264         if (portRspPut >= portRspMax) {
1265                 /*
1266                  * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
1267                  * rsp ring <portRspMax>
1268                  */
1269                 lpfc_printf_log(phba,
1270                                 KERN_ERR,
1271                                 LOG_SLI,
1272                                 "%d:0303 Ring %d handler: portRspPut %d "
1273                                 "is bigger then rsp ring %d\n",
1274                                 phba->brd_no,
1275                                 pring->ringno, portRspPut, portRspMax);
1276
1277                 phba->hba_state = LPFC_HBA_ERROR;
1278                 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1279
1280                 phba->work_hs = HS_FFER3;
1281                 lpfc_handle_eratt(phba);
1282
1283                 return 1;
1284         }
1285
1286         rmb();
1287         while (pring->rspidx != portRspPut) {
1288                 /*
1289                  * Build a completion list and call the appropriate handler.
1290                  * The process is to get the next available response iocb, get
1291                  * a free iocb from the list, copy the response data into the
1292                  * free iocb, insert to the continuation list, and update the
1293                  * next response index to slim.  This process makes response
1294                  * iocb's in the ring available to DMA as fast as possible but
1295                  * pays a penalty for a copy operation.  Since the iocb is
1296                  * only 32 bytes, this penalty is considered small relative to
1297                  * the PCI reads for register values and a slim write.  When
1298                  * the ulpLe field is set, the entire Command has been
1299                  * received.
1300                  */
1301                 entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
1302                 rspiocbp = lpfc_sli_get_iocbq(phba);
1303                 if (rspiocbp == NULL) {
1304                         printk(KERN_ERR "%s: out of buffers! Failing "
1305                                "completion.\n", __FUNCTION__);
1306                         break;
1307                 }
1308
1309                 lpfc_sli_pcimem_bcopy(entry, &rspiocbp->iocb, sizeof (IOCB_t));
1310                 irsp = &rspiocbp->iocb;
1311
1312                 if (++pring->rspidx >= portRspMax)
1313                         pring->rspidx = 0;
1314
1315                 to_slim = phba->MBslimaddr + (SLIMOFF + (pring->ringno * 2)
1316                                               + 1) * 4;
1317                 writel(pring->rspidx, to_slim);
1318
1319                 if (list_empty(&(pring->iocb_continueq))) {
1320                         list_add(&rspiocbp->list, &(pring->iocb_continueq));
1321                 } else {
1322                         list_add_tail(&rspiocbp->list,
1323                                       &(pring->iocb_continueq));
1324                 }
1325
1326                 pring->iocb_continueq_cnt++;
1327                 if (irsp->ulpLe) {
1328                         /*
1329                          * By default, the driver expects to free all resources
1330                          * associated with this iocb completion.
1331                          */
1332                         free_saveq = 1;
1333                         saveq = list_get_first(&pring->iocb_continueq,
1334                                                struct lpfc_iocbq, list);
1335                         irsp = &(saveq->iocb);
1336                         list_del_init(&pring->iocb_continueq);
1337                         pring->iocb_continueq_cnt = 0;
1338
1339                         pring->stats.iocb_rsp++;
1340
1341                         if (irsp->ulpStatus) {
1342                                 /* Rsp ring <ringno> error: IOCB */
1343                                 lpfc_printf_log(phba,
1344                                         KERN_WARNING,
1345                                         LOG_SLI,
1346                                         "%d:0328 Rsp Ring %d error: IOCB Data: "
1347                                         "x%x x%x x%x x%x x%x x%x x%x x%x\n",
1348                                         phba->brd_no,
1349                                         pring->ringno,
1350                                         irsp->un.ulpWord[0],
1351                                         irsp->un.ulpWord[1],
1352                                         irsp->un.ulpWord[2],
1353                                         irsp->un.ulpWord[3],
1354                                         irsp->un.ulpWord[4],
1355                                         irsp->un.ulpWord[5],
1356                                         *(((uint32_t *) irsp) + 6),
1357                                         *(((uint32_t *) irsp) + 7));
1358                         }
1359
1360                         /*
1361                          * Fetch the IOCB command type and call the correct
1362                          * completion routine.  Solicited and Unsolicited
1363                          * IOCBs on the ELS ring get freed back to the
1364                          * lpfc_iocb_list by the discovery kernel thread.
1365                          */
1366                         iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
1367                         type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
1368                         if (type == LPFC_SOL_IOCB) {
1369                                 spin_unlock_irqrestore(phba->host->host_lock,
1370                                                        iflag);
1371                                 rc = lpfc_sli_process_sol_iocb(phba, pring,
1372                                         saveq);
1373                                 spin_lock_irqsave(phba->host->host_lock, iflag);
1374                         } else if (type == LPFC_UNSOL_IOCB) {
1375                                 spin_unlock_irqrestore(phba->host->host_lock,
1376                                                        iflag);
1377                                 rc = lpfc_sli_process_unsol_iocb(phba, pring,
1378                                         saveq);
1379                                 spin_lock_irqsave(phba->host->host_lock, iflag);
1380                         } else if (type == LPFC_ABORT_IOCB) {
1381                                 if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) &&
1382                                     ((cmdiocbp =
1383                                       lpfc_sli_iocbq_lookup(phba, pring,
1384                                                             saveq)))) {
1385                                         /* Call the specified completion
1386                                            routine */
1387                                         if (cmdiocbp->iocb_cmpl) {
1388                                                 spin_unlock_irqrestore(
1389                                                        phba->host->host_lock,
1390                                                        iflag);
1391                                                 (cmdiocbp->iocb_cmpl) (phba,
1392                                                              cmdiocbp, saveq);
1393                                                 spin_lock_irqsave(
1394                                                           phba->host->host_lock,
1395                                                           iflag);
1396                                         } else
1397                                                 lpfc_sli_release_iocbq(phba,
1398                                                                       cmdiocbp);
1399                                 }
1400                         } else if (type == LPFC_UNKNOWN_IOCB) {
1401                                 if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
1402
1403                                         char adaptermsg[LPFC_MAX_ADPTMSG];
1404
1405                                         memset(adaptermsg, 0,
1406                                                LPFC_MAX_ADPTMSG);
1407                                         memcpy(&adaptermsg[0], (uint8_t *) irsp,
1408                                                MAX_MSG_DATA);
1409                                         dev_warn(&((phba->pcidev)->dev),
1410                                                  "lpfc%d: %s",
1411                                                  phba->brd_no, adaptermsg);
1412                                 } else {
1413                                         /* Unknown IOCB command */
1414                                         lpfc_printf_log(phba,
1415                                                 KERN_ERR,
1416                                                 LOG_SLI,
1417                                                 "%d:0335 Unknown IOCB command "
1418                                                 "Data: x%x x%x x%x x%x\n",
1419                                                 phba->brd_no,
1420                                                 irsp->ulpCommand,
1421                                                 irsp->ulpStatus,
1422                                                 irsp->ulpIoTag,
1423                                                 irsp->ulpContext);
1424                                 }
1425                         }
1426
1427                         if (free_saveq) {
1428                                 if (!list_empty(&saveq->list)) {
1429                                         list_for_each_entry_safe(rspiocbp,
1430                                                                  next_iocb,
1431                                                                  &saveq->list,
1432                                                                  list) {
1433                                                 list_del(&rspiocbp->list);
1434                                                 lpfc_sli_release_iocbq(phba,
1435                                                                      rspiocbp);
1436                                         }
1437                                 }
1438                                 lpfc_sli_release_iocbq(phba, saveq);
1439                         }
1440                 }
1441
1442                 /*
1443                  * If the port response put pointer has not been updated, sync
1444                  * the pgp->rspPutInx in the MAILBOX_tand fetch the new port
1445                  * response put pointer.
1446                  */
1447                 if (pring->rspidx == portRspPut) {
1448                         portRspPut = le32_to_cpu(pgp->rspPutInx);
1449                 }
1450         } /* while (pring->rspidx != portRspPut) */
1451
1452         if ((rspiocbp != 0) && (mask & HA_R0RE_REQ)) {
1453                 /* At least one response entry has been freed */
1454                 pring->stats.iocb_rsp_full++;
1455                 /* SET RxRE_RSP in Chip Att register */
1456                 status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
1457                 writel(status, phba->CAregaddr);
1458                 readl(phba->CAregaddr); /* flush */
1459         }
1460         if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
1461                 pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
1462                 pring->stats.iocb_cmd_empty++;
1463
1464                 /* Force update of the local copy of cmdGetInx */
1465                 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
1466                 lpfc_sli_resume_iocb(phba, pring);
1467
1468                 if ((pring->lpfc_sli_cmd_available))
1469                         (pring->lpfc_sli_cmd_available) (phba, pring);
1470
1471         }
1472
1473         spin_unlock_irqrestore(phba->host->host_lock, iflag);
1474         return rc;
1475 }
1476
1477 int
1478 lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
1479 {
1480         LIST_HEAD(completions);
1481         struct lpfc_iocbq *iocb, *next_iocb;
1482         IOCB_t *cmd = NULL;
1483         int errcnt;
1484
1485         errcnt = 0;
1486
1487         /* Error everything on txq and txcmplq
1488          * First do the txq.
1489          */
1490         spin_lock_irq(phba->host->host_lock);
1491         list_splice_init(&pring->txq, &completions);
1492         pring->txq_cnt = 0;
1493
1494         /* Next issue ABTS for everything on the txcmplq */
1495         list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list)
1496                 lpfc_sli_issue_abort_iotag(phba, pring, iocb);
1497
1498         spin_unlock_irq(phba->host->host_lock);
1499
1500         while (!list_empty(&completions)) {
1501                 iocb = list_get_first(&completions, struct lpfc_iocbq, list);
1502                 cmd = &iocb->iocb;
1503                 list_del(&iocb->list);
1504
1505                 if (iocb->iocb_cmpl) {
1506                         cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
1507                         cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
1508                         (iocb->iocb_cmpl) (phba, iocb, iocb);
1509                 } else
1510                         lpfc_sli_release_iocbq(phba, iocb);
1511         }
1512
1513         return errcnt;
1514 }
1515
1516 int
1517 lpfc_sli_brdready(struct lpfc_hba * phba, uint32_t mask)
1518 {
1519         uint32_t status;
1520         int i = 0;
1521         int retval = 0;
1522
1523         /* Read the HBA Host Status Register */
1524         status = readl(phba->HSregaddr);
1525
1526         /*
1527          * Check status register every 100ms for 5 retries, then every
1528          * 500ms for 5, then every 2.5 sec for 5, then reset board and
1529          * every 2.5 sec for 4.
1530          * Break our of the loop if errors occurred during init.
1531          */
1532         while (((status & mask) != mask) &&
1533                !(status & HS_FFERM) &&
1534                i++ < 20) {
1535
1536                 if (i <= 5)
1537                         msleep(10);
1538                 else if (i <= 10)
1539                         msleep(500);
1540                 else
1541                         msleep(2500);
1542
1543                 if (i == 15) {
1544                         phba->hba_state = LPFC_STATE_UNKNOWN; /* Do post */
1545                         lpfc_sli_brdrestart(phba);
1546                 }
1547                 /* Read the HBA Host Status Register */
1548                 status = readl(phba->HSregaddr);
1549         }
1550
1551         /* Check to see if any errors occurred during init */
1552         if ((status & HS_FFERM) || (i >= 20)) {
1553                 phba->hba_state = LPFC_HBA_ERROR;
1554                 retval = 1;
1555         }
1556
1557         return retval;
1558 }
1559
1560 #define BARRIER_TEST_PATTERN (0xdeadbeef)
1561
1562 void lpfc_reset_barrier(struct lpfc_hba * phba)
1563 {
1564         uint32_t __iomem *resp_buf;
1565         uint32_t __iomem *mbox_buf;
1566         volatile uint32_t mbox;
1567         uint32_t hc_copy;
1568         int  i;
1569         uint8_t hdrtype;
1570
1571         pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype);
1572         if (hdrtype != 0x80 ||
1573             (FC_JEDEC_ID(phba->vpd.rev.biuRev) != HELIOS_JEDEC_ID &&
1574              FC_JEDEC_ID(phba->vpd.rev.biuRev) != THOR_JEDEC_ID))
1575                 return;
1576
1577         /*
1578          * Tell the other part of the chip to suspend temporarily all
1579          * its DMA activity.
1580          */
1581         resp_buf = phba->MBslimaddr;
1582
1583         /* Disable the error attention */
1584         hc_copy = readl(phba->HCregaddr);
1585         writel((hc_copy & ~HC_ERINT_ENA), phba->HCregaddr);
1586         readl(phba->HCregaddr); /* flush */
1587         phba->fc_flag |= FC_IGNORE_ERATT;
1588
1589         if (readl(phba->HAregaddr) & HA_ERATT) {
1590                 /* Clear Chip error bit */
1591                 writel(HA_ERATT, phba->HAregaddr);
1592                 phba->stopped = 1;
1593         }
1594
1595         mbox = 0;
1596         ((MAILBOX_t *)&mbox)->mbxCommand = MBX_KILL_BOARD;
1597         ((MAILBOX_t *)&mbox)->mbxOwner = OWN_CHIP;
1598
1599         writel(BARRIER_TEST_PATTERN, (resp_buf + 1));
1600         mbox_buf = phba->MBslimaddr;
1601         writel(mbox, mbox_buf);
1602
1603         for (i = 0;
1604              readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN) && i < 50; i++)
1605                 mdelay(1);
1606
1607         if (readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN)) {
1608                 if (phba->sli.sli_flag & LPFC_SLI2_ACTIVE ||
1609                     phba->stopped)
1610                         goto restore_hc;
1611                 else
1612                         goto clear_errat;
1613         }
1614
1615         ((MAILBOX_t *)&mbox)->mbxOwner = OWN_HOST;
1616         for (i = 0; readl(resp_buf) != mbox &&  i < 500; i++)
1617                 mdelay(1);
1618
1619 clear_errat:
1620
1621         while (!(readl(phba->HAregaddr) & HA_ERATT) && ++i < 500)
1622                 mdelay(1);
1623
1624         if (readl(phba->HAregaddr) & HA_ERATT) {
1625                 writel(HA_ERATT, phba->HAregaddr);
1626                 phba->stopped = 1;
1627         }
1628
1629 restore_hc:
1630         phba->fc_flag &= ~FC_IGNORE_ERATT;
1631         writel(hc_copy, phba->HCregaddr);
1632         readl(phba->HCregaddr); /* flush */
1633 }
1634
1635 int
1636 lpfc_sli_brdkill(struct lpfc_hba * phba)
1637 {
1638         struct lpfc_sli *psli;
1639         LPFC_MBOXQ_t *pmb;
1640         uint32_t status;
1641         uint32_t ha_copy;
1642         int retval;
1643         int i = 0;
1644
1645         psli = &phba->sli;
1646
1647         /* Kill HBA */
1648         lpfc_printf_log(phba,
1649                 KERN_INFO,
1650                 LOG_SLI,
1651                 "%d:0329 Kill HBA Data: x%x x%x\n",
1652                 phba->brd_no,
1653                 phba->hba_state,
1654                 psli->sli_flag);
1655
1656         if ((pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
1657                                                   GFP_KERNEL)) == 0)
1658                 return 1;
1659
1660         /* Disable the error attention */
1661         spin_lock_irq(phba->host->host_lock);
1662         status = readl(phba->HCregaddr);
1663         status &= ~HC_ERINT_ENA;
1664         writel(status, phba->HCregaddr);
1665         readl(phba->HCregaddr); /* flush */
1666         phba->fc_flag |= FC_IGNORE_ERATT;
1667         spin_unlock_irq(phba->host->host_lock);
1668
1669         lpfc_kill_board(phba, pmb);
1670         pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
1671         retval = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
1672
1673         if (retval != MBX_SUCCESS) {
1674                 if (retval != MBX_BUSY)
1675                         mempool_free(pmb, phba->mbox_mem_pool);
1676                 spin_lock_irq(phba->host->host_lock);
1677                 phba->fc_flag &= ~FC_IGNORE_ERATT;
1678                 spin_unlock_irq(phba->host->host_lock);
1679                 return 1;
1680         }
1681
1682         psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
1683
1684         mempool_free(pmb, phba->mbox_mem_pool);
1685
1686         /* There is no completion for a KILL_BOARD mbox cmd. Check for an error
1687          * attention every 100ms for 3 seconds. If we don't get ERATT after
1688          * 3 seconds we still set HBA_ERROR state because the status of the
1689          * board is now undefined.
1690          */
1691         ha_copy = readl(phba->HAregaddr);
1692
1693         while ((i++ < 30) && !(ha_copy & HA_ERATT)) {
1694                 mdelay(100);
1695                 ha_copy = readl(phba->HAregaddr);
1696         }
1697
1698         del_timer_sync(&psli->mbox_tmo);
1699         if (ha_copy & HA_ERATT) {
1700                 writel(HA_ERATT, phba->HAregaddr);
1701                 phba->stopped = 1;
1702         }
1703         spin_lock_irq(phba->host->host_lock);
1704         psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
1705         phba->fc_flag &= ~FC_IGNORE_ERATT;
1706         spin_unlock_irq(phba->host->host_lock);
1707
1708         psli->mbox_active = NULL;
1709         lpfc_hba_down_post(phba);
1710         phba->hba_state = LPFC_HBA_ERROR;
1711
1712         return (ha_copy & HA_ERATT ? 0 : 1);
1713 }
1714
1715 int
1716 lpfc_sli_brdreset(struct lpfc_hba * phba)
1717 {
1718         struct lpfc_sli *psli;
1719         struct lpfc_sli_ring *pring;
1720         uint16_t cfg_value;
1721         int i;
1722
1723         psli = &phba->sli;
1724
1725         /* Reset HBA */
1726         lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
1727                         "%d:0325 Reset HBA Data: x%x x%x\n", phba->brd_no,
1728                         phba->hba_state, psli->sli_flag);
1729
1730         /* perform board reset */
1731         phba->fc_eventTag = 0;
1732         phba->fc_myDID = 0;
1733         phba->fc_prevDID = 0;
1734
1735         /* Turn off parity checking and serr during the physical reset */
1736         pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
1737         pci_write_config_word(phba->pcidev, PCI_COMMAND,
1738                               (cfg_value &
1739                                ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
1740
1741         psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA);
1742         /* Now toggle INITFF bit in the Host Control Register */
1743         writel(HC_INITFF, phba->HCregaddr);
1744         mdelay(1);
1745         readl(phba->HCregaddr); /* flush */
1746         writel(0, phba->HCregaddr);
1747         readl(phba->HCregaddr); /* flush */
1748
1749         /* Restore PCI cmd register */
1750         pci_write_config_word(phba->pcidev, PCI_COMMAND, cfg_value);
1751
1752         /* Initialize relevant SLI info */
1753         for (i = 0; i < psli->num_rings; i++) {
1754                 pring = &psli->ring[i];
1755                 pring->flag = 0;
1756                 pring->rspidx = 0;
1757                 pring->next_cmdidx  = 0;
1758                 pring->local_getidx = 0;
1759                 pring->cmdidx = 0;
1760                 pring->missbufcnt = 0;
1761         }
1762
1763         phba->hba_state = LPFC_WARM_START;
1764         return 0;
1765 }
1766
1767 int
1768 lpfc_sli_brdrestart(struct lpfc_hba * phba)
1769 {
1770         MAILBOX_t *mb;
1771         struct lpfc_sli *psli;
1772         uint16_t skip_post;
1773         volatile uint32_t word0;
1774         void __iomem *to_slim;
1775
1776         spin_lock_irq(phba->host->host_lock);
1777
1778         psli = &phba->sli;
1779
1780         /* Restart HBA */
1781         lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
1782                         "%d:0337 Restart HBA Data: x%x x%x\n", phba->brd_no,
1783                         phba->hba_state, psli->sli_flag);
1784
1785         word0 = 0;
1786         mb = (MAILBOX_t *) &word0;
1787         mb->mbxCommand = MBX_RESTART;
1788         mb->mbxHc = 1;
1789
1790         lpfc_reset_barrier(phba);
1791
1792         to_slim = phba->MBslimaddr;
1793         writel(*(uint32_t *) mb, to_slim);
1794         readl(to_slim); /* flush */
1795
1796         /* Only skip post after fc_ffinit is completed */
1797         if (phba->hba_state) {
1798                 skip_post = 1;
1799                 word0 = 1;      /* This is really setting up word1 */
1800         } else {
1801                 skip_post = 0;
1802                 word0 = 0;      /* This is really setting up word1 */
1803         }
1804         to_slim = phba->MBslimaddr + sizeof (uint32_t);
1805         writel(*(uint32_t *) mb, to_slim);
1806         readl(to_slim); /* flush */
1807
1808         lpfc_sli_brdreset(phba);
1809         phba->stopped = 0;
1810         phba->hba_state = LPFC_INIT_START;
1811
1812         spin_unlock_irq(phba->host->host_lock);
1813
1814         memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
1815         psli->stats_start = get_seconds();
1816
1817         if (skip_post)
1818                 mdelay(100);
1819         else
1820                 mdelay(2000);
1821
1822         lpfc_hba_down_post(phba);
1823
1824         return 0;
1825 }
1826
1827 static int
1828 lpfc_sli_chipset_init(struct lpfc_hba *phba)
1829 {
1830         uint32_t status, i = 0;
1831
1832         /* Read the HBA Host Status Register */
1833         status = readl(phba->HSregaddr);
1834
1835         /* Check status register to see what current state is */
1836         i = 0;
1837         while ((status & (HS_FFRDY | HS_MBRDY)) != (HS_FFRDY | HS_MBRDY)) {
1838
1839                 /* Check every 100ms for 5 retries, then every 500ms for 5, then
1840                  * every 2.5 sec for 5, then reset board and every 2.5 sec for
1841                  * 4.
1842                  */
1843                 if (i++ >= 20) {
1844                         /* Adapter failed to init, timeout, status reg
1845                            <status> */
1846                         lpfc_printf_log(phba,
1847                                         KERN_ERR,
1848                                         LOG_INIT,
1849                                         "%d:0436 Adapter failed to init, "
1850                                         "timeout, status reg x%x\n",
1851                                         phba->brd_no,
1852                                         status);
1853                         phba->hba_state = LPFC_HBA_ERROR;
1854                         return -ETIMEDOUT;
1855                 }
1856
1857                 /* Check to see if any errors occurred during init */
1858                 if (status & HS_FFERM) {
1859                         /* ERROR: During chipset initialization */
1860                         /* Adapter failed to init, chipset, status reg
1861                            <status> */
1862                         lpfc_printf_log(phba,
1863                                         KERN_ERR,
1864                                         LOG_INIT,
1865                                         "%d:0437 Adapter failed to init, "
1866                                         "chipset, status reg x%x\n",
1867                                         phba->brd_no,
1868                                         status);
1869                         phba->hba_state = LPFC_HBA_ERROR;
1870                         return -EIO;
1871                 }
1872
1873                 if (i <= 5) {
1874                         msleep(10);
1875                 } else if (i <= 10) {
1876                         msleep(500);
1877                 } else {
1878                         msleep(2500);
1879                 }
1880
1881                 if (i == 15) {
1882                         phba->hba_state = LPFC_STATE_UNKNOWN; /* Do post */
1883                         lpfc_sli_brdrestart(phba);
1884                 }
1885                 /* Read the HBA Host Status Register */
1886                 status = readl(phba->HSregaddr);
1887         }
1888
1889         /* Check to see if any errors occurred during init */
1890         if (status & HS_FFERM) {
1891                 /* ERROR: During chipset initialization */
1892                 /* Adapter failed to init, chipset, status reg <status> */
1893                 lpfc_printf_log(phba,
1894                                 KERN_ERR,
1895                                 LOG_INIT,
1896                                 "%d:0438 Adapter failed to init, chipset, "
1897                                 "status reg x%x\n",
1898                                 phba->brd_no,
1899                                 status);
1900                 phba->hba_state = LPFC_HBA_ERROR;
1901                 return -EIO;
1902         }
1903
1904         /* Clear all interrupt enable conditions */
1905         writel(0, phba->HCregaddr);
1906         readl(phba->HCregaddr); /* flush */
1907
1908         /* setup host attn register */
1909         writel(0xffffffff, phba->HAregaddr);
1910         readl(phba->HAregaddr); /* flush */
1911         return 0;
1912 }
1913
1914 int
1915 lpfc_sli_hba_setup(struct lpfc_hba * phba)
1916 {
1917         LPFC_MBOXQ_t *pmb;
1918         uint32_t resetcount = 0, rc = 0, done = 0;
1919
1920         pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
1921         if (!pmb) {
1922                 phba->hba_state = LPFC_HBA_ERROR;
1923                 return -ENOMEM;
1924         }
1925
1926         while (resetcount < 2 && !done) {
1927                 spin_lock_irq(phba->host->host_lock);
1928                 phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE;
1929                 spin_unlock_irq(phba->host->host_lock);
1930                 phba->hba_state = LPFC_STATE_UNKNOWN;
1931                 lpfc_sli_brdrestart(phba);
1932                 msleep(2500);
1933                 rc = lpfc_sli_chipset_init(phba);
1934                 if (rc)
1935                         break;
1936
1937                 spin_lock_irq(phba->host->host_lock);
1938                 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
1939                 spin_unlock_irq(phba->host->host_lock);
1940                 resetcount++;
1941
1942         /* Call pre CONFIG_PORT mailbox command initialization.  A value of 0
1943          * means the call was successful.  Any other nonzero value is a failure,
1944          * but if ERESTART is returned, the driver may reset the HBA and try
1945          * again.
1946          */
1947                 rc = lpfc_config_port_prep(phba);
1948                 if (rc == -ERESTART) {
1949                         phba->hba_state = 0;
1950                         continue;
1951                 } else if (rc) {
1952                         break;
1953                 }
1954
1955                 phba->hba_state = LPFC_INIT_MBX_CMDS;
1956                 lpfc_config_port(phba, pmb);
1957                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
1958                 if (rc == MBX_SUCCESS)
1959                         done = 1;
1960                 else {
1961                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1962                                 "%d:0442 Adapter failed to init, mbxCmd x%x "
1963                                 "CONFIG_PORT, mbxStatus x%x Data: x%x\n",
1964                                 phba->brd_no, pmb->mb.mbxCommand,
1965                                 pmb->mb.mbxStatus, 0);
1966                         phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
1967                 }
1968         }
1969         if (!done)
1970                 goto lpfc_sli_hba_setup_error;
1971
1972         rc = lpfc_sli_ring_map(phba, pmb);
1973
1974         if (rc)
1975                 goto lpfc_sli_hba_setup_error;
1976
1977         phba->sli.sli_flag |= LPFC_PROCESS_LA;
1978
1979         rc = lpfc_config_port_post(phba);
1980         if (rc)
1981                 goto lpfc_sli_hba_setup_error;
1982
1983         goto lpfc_sli_hba_setup_exit;
1984 lpfc_sli_hba_setup_error:
1985         phba->hba_state = LPFC_HBA_ERROR;
1986 lpfc_sli_hba_setup_exit:
1987         mempool_free(pmb, phba->mbox_mem_pool);
1988         return rc;
1989 }
1990
1991 /*! lpfc_mbox_timeout
1992  *
1993  * \pre
1994  * \post
1995  * \param hba Pointer to per struct lpfc_hba structure
1996  * \param l1  Pointer to the driver's mailbox queue.
1997  * \return
1998  *   void
1999  *
2000  * \b Description:
2001  *
2002  * This routine handles mailbox timeout events at timer interrupt context.
2003  */
2004 void
2005 lpfc_mbox_timeout(unsigned long ptr)
2006 {
2007         struct lpfc_hba *phba;
2008         unsigned long iflag;
2009
2010         phba = (struct lpfc_hba *)ptr;
2011         spin_lock_irqsave(phba->host->host_lock, iflag);
2012         if (!(phba->work_hba_events & WORKER_MBOX_TMO)) {
2013                 phba->work_hba_events |= WORKER_MBOX_TMO;
2014                 if (phba->work_wait)
2015                         wake_up(phba->work_wait);
2016         }
2017         spin_unlock_irqrestore(phba->host->host_lock, iflag);
2018 }
2019
2020 void
2021 lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
2022 {
2023         LPFC_MBOXQ_t *pmbox;
2024         MAILBOX_t *mb;
2025         struct lpfc_sli *psli = &phba->sli;
2026         struct lpfc_sli_ring *pring;
2027
2028         spin_lock_irq(phba->host->host_lock);
2029         if (!(phba->work_hba_events & WORKER_MBOX_TMO)) {
2030                 spin_unlock_irq(phba->host->host_lock);
2031                 return;
2032         }
2033
2034         pmbox = phba->sli.mbox_active;
2035         mb = &pmbox->mb;
2036
2037         /* Mbox cmd <mbxCommand> timeout */
2038         lpfc_printf_log(phba,
2039                 KERN_ERR,
2040                 LOG_MBOX | LOG_SLI,
2041                 "%d:0310 Mailbox command x%x timeout Data: x%x x%x x%p\n",
2042                 phba->brd_no,
2043                 mb->mbxCommand,
2044                 phba->hba_state,
2045                 phba->sli.sli_flag,
2046                 phba->sli.mbox_active);
2047
2048         /* Setting state unknown so lpfc_sli_abort_iocb_ring
2049          * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
2050          * it to fail all oustanding SCSI IO.
2051          */
2052         phba->hba_state = LPFC_STATE_UNKNOWN;
2053         phba->work_hba_events &= ~WORKER_MBOX_TMO;
2054         phba->fc_flag |= FC_ESTABLISH_LINK;
2055         psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
2056         spin_unlock_irq(phba->host->host_lock);
2057
2058         pring = &psli->ring[psli->fcp_ring];
2059         lpfc_sli_abort_iocb_ring(phba, pring);
2060
2061         lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
2062                         "%d:0316 Resetting board due to mailbox timeout\n",
2063                         phba->brd_no);
2064         /*
2065          * lpfc_offline calls lpfc_sli_hba_down which will clean up
2066          * on oustanding mailbox commands.
2067          */
2068         lpfc_offline_prep(phba);
2069         lpfc_offline(phba);
2070         lpfc_sli_brdrestart(phba);
2071         if (lpfc_online(phba) == 0)             /* Initialize the HBA */
2072                 mod_timer(&phba->fc_estabtmo, jiffies + HZ * 60);
2073         lpfc_unblock_mgmt_io(phba);
2074         return;
2075 }
2076
2077 int
2078 lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
2079 {
2080         MAILBOX_t *mb;
2081         struct lpfc_sli *psli;
2082         uint32_t status, evtctr;
2083         uint32_t ha_copy;
2084         int i;
2085         unsigned long drvr_flag = 0;
2086         volatile uint32_t word0, ldata;
2087         void __iomem *to_slim;
2088
2089         /* If the PCI channel is in offline state, do not post mbox. */
2090         if (unlikely(pci_channel_offline(phba->pcidev)))
2091                 return MBX_NOT_FINISHED;
2092
2093         psli = &phba->sli;
2094
2095         spin_lock_irqsave(phba->host->host_lock, drvr_flag);
2096
2097
2098         mb = &pmbox->mb;
2099         status = MBX_SUCCESS;
2100
2101         if (phba->hba_state == LPFC_HBA_ERROR) {
2102                 spin_unlock_irqrestore(phba->host->host_lock, drvr_flag);
2103
2104                 /* Mbox command <mbxCommand> cannot issue */
2105                 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2106                 return (MBX_NOT_FINISHED);
2107         }
2108
2109         if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
2110             !(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
2111                 spin_unlock_irqrestore(phba->host->host_lock, drvr_flag);
2112                 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2113                 return (MBX_NOT_FINISHED);
2114         }
2115
2116         if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
2117                 /* Polling for a mbox command when another one is already active
2118                  * is not allowed in SLI. Also, the driver must have established
2119                  * SLI2 mode to queue and process multiple mbox commands.
2120                  */
2121
2122                 if (flag & MBX_POLL) {
2123                         spin_unlock_irqrestore(phba->host->host_lock,
2124                                                drvr_flag);
2125
2126                         /* Mbox command <mbxCommand> cannot issue */
2127                         LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2128                         return (MBX_NOT_FINISHED);
2129                 }
2130
2131                 if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
2132                         spin_unlock_irqrestore(phba->host->host_lock,
2133                                                drvr_flag);
2134                         /* Mbox command <mbxCommand> cannot issue */
2135                         LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2136                         return (MBX_NOT_FINISHED);
2137                 }
2138
2139                 /* Handle STOP IOCB processing flag. This is only meaningful
2140                  * if we are not polling for mbox completion.
2141                  */
2142                 if (flag & MBX_STOP_IOCB) {
2143                         flag &= ~MBX_STOP_IOCB;
2144                         /* Now flag each ring */
2145                         for (i = 0; i < psli->num_rings; i++) {
2146                                 /* If the ring is active, flag it */
2147                                 if (psli->ring[i].cmdringaddr) {
2148                                         psli->ring[i].flag |=
2149                                             LPFC_STOP_IOCB_MBX;
2150                                 }
2151                         }
2152                 }
2153
2154                 /* Another mailbox command is still being processed, queue this
2155                  * command to be processed later.
2156                  */
2157                 lpfc_mbox_put(phba, pmbox);
2158
2159                 /* Mbox cmd issue - BUSY */
2160                 lpfc_printf_log(phba,
2161                         KERN_INFO,
2162                         LOG_MBOX | LOG_SLI,
2163                         "%d:0308 Mbox cmd issue - BUSY Data: x%x x%x x%x x%x\n",
2164                         phba->brd_no,
2165                         mb->mbxCommand,
2166                         phba->hba_state,
2167                         psli->sli_flag,
2168                         flag);
2169
2170                 psli->slistat.mbox_busy++;
2171                 spin_unlock_irqrestore(phba->host->host_lock,
2172                                        drvr_flag);
2173
2174                 return (MBX_BUSY);
2175         }
2176
2177         /* Handle STOP IOCB processing flag. This is only meaningful
2178          * if we are not polling for mbox completion.
2179          */
2180         if (flag & MBX_STOP_IOCB) {
2181                 flag &= ~MBX_STOP_IOCB;
2182                 if (flag == MBX_NOWAIT) {
2183                         /* Now flag each ring */
2184                         for (i = 0; i < psli->num_rings; i++) {
2185                                 /* If the ring is active, flag it */
2186                                 if (psli->ring[i].cmdringaddr) {
2187                                         psli->ring[i].flag |=
2188                                             LPFC_STOP_IOCB_MBX;
2189                                 }
2190                         }
2191                 }
2192         }
2193
2194         psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
2195
2196         /* If we are not polling, we MUST be in SLI2 mode */
2197         if (flag != MBX_POLL) {
2198                 if (!(psli->sli_flag & LPFC_SLI2_ACTIVE) &&
2199                     (mb->mbxCommand != MBX_KILL_BOARD)) {
2200                         psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2201                         spin_unlock_irqrestore(phba->host->host_lock,
2202                                                drvr_flag);
2203                         /* Mbox command <mbxCommand> cannot issue */
2204                         LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag);
2205                         return (MBX_NOT_FINISHED);
2206                 }
2207                 /* timeout active mbox command */
2208                 mod_timer(&psli->mbox_tmo, (jiffies +
2209                                (HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand))));
2210         }
2211
2212         /* Mailbox cmd <cmd> issue */
2213         lpfc_printf_log(phba,
2214                 KERN_INFO,
2215                 LOG_MBOX | LOG_SLI,
2216                 "%d:0309 Mailbox cmd x%x issue Data: x%x x%x x%x\n",
2217                 phba->brd_no,
2218                 mb->mbxCommand,
2219                 phba->hba_state,
2220                 psli->sli_flag,
2221                 flag);
2222
2223         psli->slistat.mbox_cmd++;
2224         evtctr = psli->slistat.mbox_event;
2225
2226         /* next set own bit for the adapter and copy over command word */
2227         mb->mbxOwner = OWN_CHIP;
2228
2229         if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2230                 /* First copy command data to host SLIM area */
2231                 lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, MAILBOX_CMD_SIZE);
2232         } else {
2233                 if (mb->mbxCommand == MBX_CONFIG_PORT) {
2234                         /* copy command data into host mbox for cmpl */
2235                         lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx,
2236                                         MAILBOX_CMD_SIZE);
2237                 }
2238
2239                 /* First copy mbox command data to HBA SLIM, skip past first
2240                    word */
2241                 to_slim = phba->MBslimaddr + sizeof (uint32_t);
2242                 lpfc_memcpy_to_slim(to_slim, &mb->un.varWords[0],
2243                             MAILBOX_CMD_SIZE - sizeof (uint32_t));
2244
2245                 /* Next copy over first word, with mbxOwner set */
2246                 ldata = *((volatile uint32_t *)mb);
2247                 to_slim = phba->MBslimaddr;
2248                 writel(ldata, to_slim);
2249                 readl(to_slim); /* flush */
2250
2251                 if (mb->mbxCommand == MBX_CONFIG_PORT) {
2252                         /* switch over to host mailbox */
2253                         psli->sli_flag |= LPFC_SLI2_ACTIVE;
2254                 }
2255         }
2256
2257         wmb();
2258         /* interrupt board to doit right away */
2259         writel(CA_MBATT, phba->CAregaddr);
2260         readl(phba->CAregaddr); /* flush */
2261
2262         switch (flag) {
2263         case MBX_NOWAIT:
2264                 /* Don't wait for it to finish, just return */
2265                 psli->mbox_active = pmbox;
2266                 break;
2267
2268         case MBX_POLL:
2269                 psli->mbox_active = NULL;
2270                 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2271                         /* First read mbox status word */
2272                         word0 = *((volatile uint32_t *)&phba->slim2p->mbx);
2273                         word0 = le32_to_cpu(word0);
2274                 } else {
2275                         /* First read mbox status word */
2276                         word0 = readl(phba->MBslimaddr);
2277                 }
2278
2279                 /* Read the HBA Host Attention Register */
2280                 ha_copy = readl(phba->HAregaddr);
2281
2282                 i = lpfc_mbox_tmo_val(phba, mb->mbxCommand);
2283                 i *= 1000; /* Convert to ms */
2284
2285                 /* Wait for command to complete */
2286                 while (((word0 & OWN_CHIP) == OWN_CHIP) ||
2287                        (!(ha_copy & HA_MBATT) &&
2288                         (phba->hba_state > LPFC_WARM_START))) {
2289                         if (i-- <= 0) {
2290                                 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2291                                 spin_unlock_irqrestore(phba->host->host_lock,
2292                                                        drvr_flag);
2293                                 return (MBX_NOT_FINISHED);
2294                         }
2295
2296                         /* Check if we took a mbox interrupt while we were
2297                            polling */
2298                         if (((word0 & OWN_CHIP) != OWN_CHIP)
2299                             && (evtctr != psli->slistat.mbox_event))
2300                                 break;
2301
2302                         spin_unlock_irqrestore(phba->host->host_lock,
2303                                                drvr_flag);
2304
2305                         msleep(1);
2306
2307                         spin_lock_irqsave(phba->host->host_lock, drvr_flag);
2308
2309                         if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2310                                 /* First copy command data */
2311                                 word0 = *((volatile uint32_t *)
2312                                                 &phba->slim2p->mbx);
2313                                 word0 = le32_to_cpu(word0);
2314                                 if (mb->mbxCommand == MBX_CONFIG_PORT) {
2315                                         MAILBOX_t *slimmb;
2316                                         volatile uint32_t slimword0;
2317                                         /* Check real SLIM for any errors */
2318                                         slimword0 = readl(phba->MBslimaddr);
2319                                         slimmb = (MAILBOX_t *) & slimword0;
2320                                         if (((slimword0 & OWN_CHIP) != OWN_CHIP)
2321                                             && slimmb->mbxStatus) {
2322                                                 psli->sli_flag &=
2323                                                     ~LPFC_SLI2_ACTIVE;
2324                                                 word0 = slimword0;
2325                                         }
2326                                 }
2327                         } else {
2328                                 /* First copy command data */
2329                                 word0 = readl(phba->MBslimaddr);
2330                         }
2331                         /* Read the HBA Host Attention Register */
2332                         ha_copy = readl(phba->HAregaddr);
2333                 }
2334
2335                 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2336                         /* copy results back to user */
2337                         lpfc_sli_pcimem_bcopy(&phba->slim2p->mbx, mb,
2338                                         MAILBOX_CMD_SIZE);
2339                 } else {
2340                         /* First copy command data */
2341                         lpfc_memcpy_from_slim(mb, phba->MBslimaddr,
2342                                                         MAILBOX_CMD_SIZE);
2343                         if ((mb->mbxCommand == MBX_DUMP_MEMORY) &&
2344                                 pmbox->context2) {
2345                                 lpfc_memcpy_from_slim((void *)pmbox->context2,
2346                                       phba->MBslimaddr + DMP_RSP_OFFSET,
2347                                                       mb->un.varDmp.word_cnt);
2348                         }
2349                 }
2350
2351                 writel(HA_MBATT, phba->HAregaddr);
2352                 readl(phba->HAregaddr); /* flush */
2353
2354                 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2355                 status = mb->mbxStatus;
2356         }
2357
2358         spin_unlock_irqrestore(phba->host->host_lock, drvr_flag);
2359         return (status);
2360 }
2361
2362 static int
2363 lpfc_sli_ringtx_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
2364                     struct lpfc_iocbq * piocb)
2365 {
2366         /* Insert the caller's iocb in the txq tail for later processing. */
2367         list_add_tail(&piocb->list, &pring->txq);
2368         pring->txq_cnt++;
2369         return (0);
2370 }
2371
2372 static struct lpfc_iocbq *
2373 lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2374                    struct lpfc_iocbq ** piocb)
2375 {
2376         struct lpfc_iocbq * nextiocb;
2377
2378         nextiocb = lpfc_sli_ringtx_get(phba, pring);
2379         if (!nextiocb) {
2380                 nextiocb = *piocb;
2381                 *piocb = NULL;
2382         }
2383
2384         return nextiocb;
2385 }
2386
2387 int
2388 lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2389                     struct lpfc_iocbq *piocb, uint32_t flag)
2390 {
2391         struct lpfc_iocbq *nextiocb;
2392         IOCB_t *iocb;
2393
2394         /* If the PCI channel is in offline state, do not post iocbs. */
2395         if (unlikely(pci_channel_offline(phba->pcidev)))
2396                 return IOCB_ERROR;
2397
2398         /*
2399          * We should never get an IOCB if we are in a < LINK_DOWN state
2400          */
2401         if (unlikely(phba->hba_state < LPFC_LINK_DOWN))
2402                 return IOCB_ERROR;
2403
2404         /*
2405          * Check to see if we are blocking IOCB processing because of a
2406          * outstanding mbox command.
2407          */
2408         if (unlikely(pring->flag & LPFC_STOP_IOCB_MBX))
2409                 goto iocb_busy;
2410
2411         if (unlikely(phba->hba_state == LPFC_LINK_DOWN)) {
2412                 /*
2413                  * Only CREATE_XRI, CLOSE_XRI, and QUE_RING_BUF
2414                  * can be issued if the link is not up.
2415                  */
2416                 switch (piocb->iocb.ulpCommand) {
2417                 case CMD_QUE_RING_BUF_CN:
2418                 case CMD_QUE_RING_BUF64_CN:
2419                         /*
2420                          * For IOCBs, like QUE_RING_BUF, that have no rsp ring
2421                          * completion, iocb_cmpl MUST be 0.
2422                          */
2423                         if (piocb->iocb_cmpl)
2424                                 piocb->iocb_cmpl = NULL;
2425                         /*FALLTHROUGH*/
2426                 case CMD_CREATE_XRI_CR:
2427                 case CMD_CLOSE_XRI_CN:
2428                 case CMD_CLOSE_XRI_CX:
2429                         break;
2430                 default:
2431                         goto iocb_busy;
2432                 }
2433
2434         /*
2435          * For FCP commands, we must be in a state where we can process link
2436          * attention events.
2437          */
2438         } else if (unlikely(pring->ringno == phba->sli.fcp_ring &&
2439                    !(phba->sli.sli_flag & LPFC_PROCESS_LA)))
2440                 goto iocb_busy;
2441
2442         while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
2443                (nextiocb = lpfc_sli_next_iocb(phba, pring, &piocb)))
2444                 lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
2445
2446         if (iocb)
2447                 lpfc_sli_update_ring(phba, pring);
2448         else
2449                 lpfc_sli_update_full_ring(phba, pring);
2450
2451         if (!piocb)
2452                 return IOCB_SUCCESS;
2453
2454         goto out_busy;
2455
2456  iocb_busy:
2457         pring->stats.iocb_cmd_delay++;
2458
2459  out_busy:
2460
2461         if (!(flag & SLI_IOCB_RET_IOCB)) {
2462                 lpfc_sli_ringtx_put(phba, pring, piocb);
2463                 return IOCB_SUCCESS;
2464         }
2465
2466         return IOCB_BUSY;
2467 }
2468
2469 static int
2470 lpfc_extra_ring_setup( struct lpfc_hba *phba)
2471 {
2472         struct lpfc_sli *psli;
2473         struct lpfc_sli_ring *pring;
2474
2475         psli = &phba->sli;
2476
2477         /* Adjust cmd/rsp ring iocb entries more evenly */
2478
2479         /* Take some away from the FCP ring */
2480         pring = &psli->ring[psli->fcp_ring];
2481         pring->numCiocb -= SLI2_IOCB_CMD_R1XTRA_ENTRIES;
2482         pring->numRiocb -= SLI2_IOCB_RSP_R1XTRA_ENTRIES;
2483         pring->numCiocb -= SLI2_IOCB_CMD_R3XTRA_ENTRIES;
2484         pring->numRiocb -= SLI2_IOCB_RSP_R3XTRA_ENTRIES;
2485
2486         /* and give them to the extra ring */
2487         pring = &psli->ring[psli->extra_ring];
2488
2489         pring->numCiocb += SLI2_IOCB_CMD_R1XTRA_ENTRIES;
2490         pring->numRiocb += SLI2_IOCB_RSP_R1XTRA_ENTRIES;
2491         pring->numCiocb += SLI2_IOCB_CMD_R3XTRA_ENTRIES;
2492         pring->numRiocb += SLI2_IOCB_RSP_R3XTRA_ENTRIES;
2493
2494         /* Setup default profile for this ring */
2495         pring->iotag_max = 4096;
2496         pring->num_mask = 1;
2497         pring->prt[0].profile = 0;      /* Mask 0 */
2498         pring->prt[0].rctl = phba->cfg_multi_ring_rctl;
2499         pring->prt[0].type = phba->cfg_multi_ring_type;
2500         pring->prt[0].lpfc_sli_rcv_unsol_event = NULL;
2501         return 0;
2502 }
2503
2504 int
2505 lpfc_sli_setup(struct lpfc_hba *phba)
2506 {
2507         int i, totiocb = 0;
2508         struct lpfc_sli *psli = &phba->sli;
2509         struct lpfc_sli_ring *pring;
2510
2511         psli->num_rings = MAX_CONFIGURED_RINGS;
2512         psli->sli_flag = 0;
2513         psli->fcp_ring = LPFC_FCP_RING;
2514         psli->next_ring = LPFC_FCP_NEXT_RING;
2515         psli->extra_ring = LPFC_EXTRA_RING;
2516
2517         psli->iocbq_lookup = NULL;
2518         psli->iocbq_lookup_len = 0;
2519         psli->last_iotag = 0;
2520
2521         for (i = 0; i < psli->num_rings; i++) {
2522                 pring = &psli->ring[i];
2523                 switch (i) {
2524                 case LPFC_FCP_RING:     /* ring 0 - FCP */
2525                         /* numCiocb and numRiocb are used in config_port */
2526                         pring->numCiocb = SLI2_IOCB_CMD_R0_ENTRIES;
2527                         pring->numRiocb = SLI2_IOCB_RSP_R0_ENTRIES;
2528                         pring->numCiocb += SLI2_IOCB_CMD_R1XTRA_ENTRIES;
2529                         pring->numRiocb += SLI2_IOCB_RSP_R1XTRA_ENTRIES;
2530                         pring->numCiocb += SLI2_IOCB_CMD_R3XTRA_ENTRIES;
2531                         pring->numRiocb += SLI2_IOCB_RSP_R3XTRA_ENTRIES;
2532                         pring->iotag_ctr = 0;
2533                         pring->iotag_max =
2534                             (phba->cfg_hba_queue_depth * 2);
2535                         pring->fast_iotag = pring->iotag_max;
2536                         pring->num_mask = 0;
2537                         break;
2538                 case LPFC_EXTRA_RING:   /* ring 1 - EXTRA */
2539                         /* numCiocb and numRiocb are used in config_port */
2540                         pring->numCiocb = SLI2_IOCB_CMD_R1_ENTRIES;
2541                         pring->numRiocb = SLI2_IOCB_RSP_R1_ENTRIES;
2542                         pring->num_mask = 0;
2543                         break;
2544                 case LPFC_ELS_RING:     /* ring 2 - ELS / CT */
2545                         /* numCiocb and numRiocb are used in config_port */
2546                         pring->numCiocb = SLI2_IOCB_CMD_R2_ENTRIES;
2547                         pring->numRiocb = SLI2_IOCB_RSP_R2_ENTRIES;
2548                         pring->fast_iotag = 0;
2549                         pring->iotag_ctr = 0;
2550                         pring->iotag_max = 4096;
2551                         pring->num_mask = 4;
2552                         pring->prt[0].profile = 0;      /* Mask 0 */
2553                         pring->prt[0].rctl = FC_ELS_REQ;
2554                         pring->prt[0].type = FC_ELS_DATA;
2555                         pring->prt[0].lpfc_sli_rcv_unsol_event =
2556                             lpfc_els_unsol_event;
2557                         pring->prt[1].profile = 0;      /* Mask 1 */
2558                         pring->prt[1].rctl = FC_ELS_RSP;
2559                         pring->prt[1].type = FC_ELS_DATA;
2560                         pring->prt[1].lpfc_sli_rcv_unsol_event =
2561                             lpfc_els_unsol_event;
2562                         pring->prt[2].profile = 0;      /* Mask 2 */
2563                         /* NameServer Inquiry */
2564                         pring->prt[2].rctl = FC_UNSOL_CTL;
2565                         /* NameServer */
2566                         pring->prt[2].type = FC_COMMON_TRANSPORT_ULP;
2567                         pring->prt[2].lpfc_sli_rcv_unsol_event =
2568                             lpfc_ct_unsol_event;
2569                         pring->prt[3].profile = 0;      /* Mask 3 */
2570                         /* NameServer response */
2571                         pring->prt[3].rctl = FC_SOL_CTL;
2572                         /* NameServer */
2573                         pring->prt[3].type = FC_COMMON_TRANSPORT_ULP;
2574                         pring->prt[3].lpfc_sli_rcv_unsol_event =
2575                             lpfc_ct_unsol_event;
2576                         break;
2577                 }
2578                 totiocb += (pring->numCiocb + pring->numRiocb);
2579         }
2580         if (totiocb > MAX_SLI2_IOCB) {
2581                 /* Too many cmd / rsp ring entries in SLI2 SLIM */
2582                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2583                                 "%d:0462 Too many cmd / rsp ring entries in "
2584                                 "SLI2 SLIM Data: x%x x%x\n",
2585                                 phba->brd_no, totiocb, MAX_SLI2_IOCB);
2586         }
2587         if (phba->cfg_multi_ring_support == 2)
2588                 lpfc_extra_ring_setup(phba);
2589
2590         return 0;
2591 }
2592
2593 int
2594 lpfc_sli_queue_setup(struct lpfc_hba * phba)
2595 {
2596         struct lpfc_sli *psli;
2597         struct lpfc_sli_ring *pring;
2598         int i;
2599
2600         psli = &phba->sli;
2601         spin_lock_irq(phba->host->host_lock);
2602         INIT_LIST_HEAD(&psli->mboxq);
2603         /* Initialize list headers for txq and txcmplq as double linked lists */
2604         for (i = 0; i < psli->num_rings; i++) {
2605                 pring = &psli->ring[i];
2606                 pring->ringno = i;
2607                 pring->next_cmdidx  = 0;
2608                 pring->local_getidx = 0;
2609                 pring->cmdidx = 0;
2610                 INIT_LIST_HEAD(&pring->txq);
2611                 INIT_LIST_HEAD(&pring->txcmplq);
2612                 INIT_LIST_HEAD(&pring->iocb_continueq);
2613                 INIT_LIST_HEAD(&pring->postbufq);
2614         }
2615         spin_unlock_irq(phba->host->host_lock);
2616         return (1);
2617 }
2618
2619 int
2620 lpfc_sli_hba_down(struct lpfc_hba * phba)
2621 {
2622         LIST_HEAD(completions);
2623         struct lpfc_sli *psli;
2624         struct lpfc_sli_ring *pring;
2625         LPFC_MBOXQ_t *pmb;
2626         struct lpfc_iocbq *iocb;
2627         IOCB_t *cmd = NULL;
2628         int i;
2629         unsigned long flags = 0;
2630
2631         psli = &phba->sli;
2632         lpfc_hba_down_prep(phba);
2633
2634         spin_lock_irqsave(phba->host->host_lock, flags);
2635         for (i = 0; i < psli->num_rings; i++) {
2636                 pring = &psli->ring[i];
2637                 pring->flag |= LPFC_DEFERRED_RING_EVENT;
2638
2639                 /*
2640                  * Error everything on the txq since these iocbs have not been
2641                  * given to the FW yet.
2642                  */
2643                 list_splice_init(&pring->txq, &completions);
2644                 pring->txq_cnt = 0;
2645
2646         }
2647         spin_unlock_irqrestore(phba->host->host_lock, flags);
2648
2649         while (!list_empty(&completions)) {
2650                 iocb = list_get_first(&completions, struct lpfc_iocbq, list);
2651                 cmd = &iocb->iocb;
2652                 list_del(&iocb->list);
2653
2654                 if (iocb->iocb_cmpl) {
2655                         cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
2656                         cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
2657                         (iocb->iocb_cmpl) (phba, iocb, iocb);
2658                 } else
2659                         lpfc_sli_release_iocbq(phba, iocb);
2660         }
2661
2662         /* Return any active mbox cmds */
2663         del_timer_sync(&psli->mbox_tmo);
2664         spin_lock_irqsave(phba->host->host_lock, flags);
2665         phba->work_hba_events &= ~WORKER_MBOX_TMO;
2666         if (psli->mbox_active) {
2667                 pmb = psli->mbox_active;
2668                 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
2669                 if (pmb->mbox_cmpl) {
2670                         spin_unlock_irqrestore(phba->host->host_lock, flags);
2671                         pmb->mbox_cmpl(phba,pmb);
2672                         spin_lock_irqsave(phba->host->host_lock, flags);
2673                 }
2674         }
2675         psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2676         psli->mbox_active = NULL;
2677
2678         /* Return any pending mbox cmds */
2679         while ((pmb = lpfc_mbox_get(phba)) != NULL) {
2680                 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
2681                 if (pmb->mbox_cmpl) {
2682                         spin_unlock_irqrestore(phba->host->host_lock, flags);
2683                         pmb->mbox_cmpl(phba,pmb);
2684                         spin_lock_irqsave(phba->host->host_lock, flags);
2685                 }
2686         }
2687
2688         INIT_LIST_HEAD(&psli->mboxq);
2689
2690         spin_unlock_irqrestore(phba->host->host_lock, flags);
2691
2692         return 1;
2693 }
2694
2695 void
2696 lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt)
2697 {
2698         uint32_t *src = srcp;
2699         uint32_t *dest = destp;
2700         uint32_t ldata;
2701         int i;
2702
2703         for (i = 0; i < (int)cnt; i += sizeof (uint32_t)) {
2704                 ldata = *src;
2705                 ldata = le32_to_cpu(ldata);
2706                 *dest = ldata;
2707                 src++;
2708                 dest++;
2709         }
2710 }
2711
2712 int
2713 lpfc_sli_ringpostbuf_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
2714                          struct lpfc_dmabuf * mp)
2715 {
2716         /* Stick struct lpfc_dmabuf at end of postbufq so driver can look it up
2717            later */
2718         list_add_tail(&mp->list, &pring->postbufq);
2719
2720         pring->postbufq_cnt++;
2721         return 0;
2722 }
2723
2724
2725 struct lpfc_dmabuf *
2726 lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2727                          dma_addr_t phys)
2728 {
2729         struct lpfc_dmabuf *mp, *next_mp;
2730         struct list_head *slp = &pring->postbufq;
2731
2732         /* Search postbufq, from the begining, looking for a match on phys */
2733         list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
2734                 if (mp->phys == phys) {
2735                         list_del_init(&mp->list);
2736                         pring->postbufq_cnt--;
2737                         return mp;
2738                 }
2739         }
2740
2741         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2742                         "%d:0410 Cannot find virtual addr for mapped buf on "
2743                         "ring %d Data x%llx x%p x%p x%x\n",
2744                         phba->brd_no, pring->ringno, (unsigned long long)phys,
2745                         slp->next, slp->prev, pring->postbufq_cnt);
2746         return NULL;
2747 }
2748
2749 static void
2750 lpfc_sli_abort_els_cmpl(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
2751                         struct lpfc_iocbq * rspiocb)
2752 {
2753         IOCB_t *irsp;
2754         uint16_t abort_iotag, abort_context;
2755         struct lpfc_iocbq *abort_iocb, *rsp_ab_iocb;
2756         struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
2757
2758         abort_iocb = NULL;
2759         irsp = &rspiocb->iocb;
2760
2761         spin_lock_irq(phba->host->host_lock);
2762
2763         if (irsp->ulpStatus) {
2764                 abort_context = cmdiocb->iocb.un.acxri.abortContextTag;
2765                 abort_iotag = cmdiocb->iocb.un.acxri.abortIoTag;
2766
2767                 if (abort_iotag != 0 && abort_iotag <= phba->sli.last_iotag)
2768                         abort_iocb = phba->sli.iocbq_lookup[abort_iotag];
2769
2770                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
2771                                 "%d:0327 Cannot abort els iocb %p"
2772                                 " with tag %x context %x\n",
2773                                 phba->brd_no, abort_iocb,
2774                                 abort_iotag, abort_context);
2775
2776                 /*
2777                  * make sure we have the right iocbq before taking it
2778                  * off the txcmplq and try to call completion routine.
2779                  */
2780                 if (abort_iocb &&
2781                     abort_iocb->iocb.ulpContext == abort_context &&
2782                     abort_iocb->iocb_flag & LPFC_DRIVER_ABORTED) {
2783                         list_del(&abort_iocb->list);
2784                         pring->txcmplq_cnt--;
2785
2786                         rsp_ab_iocb = lpfc_sli_get_iocbq(phba);
2787                         if (rsp_ab_iocb == NULL)
2788                                 lpfc_sli_release_iocbq(phba, abort_iocb);
2789                         else {
2790                                 abort_iocb->iocb_flag &=
2791                                         ~LPFC_DRIVER_ABORTED;
2792                                 rsp_ab_iocb->iocb.ulpStatus =
2793                                         IOSTAT_LOCAL_REJECT;
2794                                 rsp_ab_iocb->iocb.un.ulpWord[4] =
2795                                         IOERR_SLI_ABORTED;
2796                                 spin_unlock_irq(phba->host->host_lock);
2797                                 (abort_iocb->iocb_cmpl)
2798                                         (phba, abort_iocb, rsp_ab_iocb);
2799                                 spin_lock_irq(phba->host->host_lock);
2800                                 lpfc_sli_release_iocbq(phba, rsp_ab_iocb);
2801                         }
2802                 }
2803         }
2804
2805         lpfc_sli_release_iocbq(phba, cmdiocb);
2806         spin_unlock_irq(phba->host->host_lock);
2807         return;
2808 }
2809
2810 int
2811 lpfc_sli_issue_abort_iotag(struct lpfc_hba * phba,
2812                            struct lpfc_sli_ring * pring,
2813                            struct lpfc_iocbq * cmdiocb)
2814 {
2815         struct lpfc_iocbq *abtsiocbp;
2816         IOCB_t *icmd = NULL;
2817         IOCB_t *iabt = NULL;
2818         int retval = IOCB_ERROR;
2819
2820         /* There are certain command types we don't want
2821          * to abort.
2822          */
2823         icmd = &cmdiocb->iocb;
2824         if ((icmd->ulpCommand == CMD_ABORT_XRI_CN) ||
2825             (icmd->ulpCommand == CMD_CLOSE_XRI_CN))
2826                 return 0;
2827
2828         /* If we're unloading, interrupts are disabled so we
2829          * need to cleanup the iocb here.
2830          */
2831         if (phba->fc_flag & FC_UNLOADING)
2832                 goto abort_iotag_exit;
2833
2834         /* issue ABTS for this IOCB based on iotag */
2835         abtsiocbp = lpfc_sli_get_iocbq(phba);
2836         if (abtsiocbp == NULL)
2837                 return 0;
2838
2839         /* This signals the response to set the correct status
2840          * before calling the completion handler.
2841          */
2842         cmdiocb->iocb_flag |= LPFC_DRIVER_ABORTED;
2843
2844         iabt = &abtsiocbp->iocb;
2845         iabt->un.acxri.abortType = ABORT_TYPE_ABTS;
2846         iabt->un.acxri.abortContextTag = icmd->ulpContext;
2847         iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
2848         iabt->ulpLe = 1;
2849         iabt->ulpClass = icmd->ulpClass;
2850
2851         if (phba->hba_state >= LPFC_LINK_UP)
2852                 iabt->ulpCommand = CMD_ABORT_XRI_CN;
2853         else
2854                 iabt->ulpCommand = CMD_CLOSE_XRI_CN;
2855
2856         abtsiocbp->iocb_cmpl = lpfc_sli_abort_els_cmpl;
2857
2858         lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
2859                         "%d:0339 Abort xri x%x, original iotag x%x, abort "
2860                         "cmd iotag x%x\n",
2861                         phba->brd_no, iabt->un.acxri.abortContextTag,
2862                         iabt->un.acxri.abortIoTag, abtsiocbp->iotag);
2863         retval = lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0);
2864
2865 abort_iotag_exit:
2866
2867         /* If we could not issue an abort dequeue the iocb and handle
2868          * the completion here.
2869          */
2870         if (retval == IOCB_ERROR) {
2871                 list_del(&cmdiocb->list);
2872                 pring->txcmplq_cnt--;
2873
2874                 if (cmdiocb->iocb_cmpl) {
2875                         icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
2876                         icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
2877                         spin_unlock_irq(phba->host->host_lock);
2878                         (cmdiocb->iocb_cmpl) (phba, cmdiocb, cmdiocb);
2879                         spin_lock_irq(phba->host->host_lock);
2880                 } else
2881                         lpfc_sli_release_iocbq(phba, cmdiocb);
2882         }
2883
2884         return 1;
2885 }
2886
2887 static int
2888 lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, uint16_t tgt_id,
2889                            uint64_t lun_id, uint32_t ctx,
2890                            lpfc_ctx_cmd ctx_cmd)
2891 {
2892         struct lpfc_scsi_buf *lpfc_cmd;
2893         struct scsi_cmnd *cmnd;
2894         int rc = 1;
2895
2896         if (!(iocbq->iocb_flag &  LPFC_IO_FCP))
2897                 return rc;
2898
2899         lpfc_cmd = container_of(iocbq, struct lpfc_scsi_buf, cur_iocbq);
2900         cmnd = lpfc_cmd->pCmd;
2901
2902         if (cmnd == NULL)
2903                 return rc;
2904
2905         switch (ctx_cmd) {
2906         case LPFC_CTX_LUN:
2907                 if ((cmnd->device->id == tgt_id) &&
2908                     (cmnd->device->lun == lun_id))
2909                         rc = 0;
2910                 break;
2911         case LPFC_CTX_TGT:
2912                 if (cmnd->device->id == tgt_id)
2913                         rc = 0;
2914                 break;
2915         case LPFC_CTX_CTX:
2916                 if (iocbq->iocb.ulpContext == ctx)
2917                         rc = 0;
2918                 break;
2919         case LPFC_CTX_HOST:
2920                 rc = 0;
2921                 break;
2922         default:
2923                 printk(KERN_ERR "%s: Unknown context cmd type, value %d\n",
2924                         __FUNCTION__, ctx_cmd);
2925                 break;
2926         }
2927
2928         return rc;
2929 }
2930
2931 int
2932 lpfc_sli_sum_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2933                 uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd ctx_cmd)
2934 {
2935         struct lpfc_iocbq *iocbq;
2936         int sum, i;
2937
2938         for (i = 1, sum = 0; i <= phba->sli.last_iotag; i++) {
2939                 iocbq = phba->sli.iocbq_lookup[i];
2940
2941                 if (lpfc_sli_validate_fcp_iocb (iocbq, tgt_id, lun_id,
2942                                                 0, ctx_cmd) == 0)
2943                         sum++;
2944         }
2945
2946         return sum;
2947 }
2948
2949 void
2950 lpfc_sli_abort_fcp_cmpl(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
2951                            struct lpfc_iocbq * rspiocb)
2952 {
2953         unsigned long iflags;
2954
2955         spin_lock_irqsave(phba->host->host_lock, iflags);
2956         lpfc_sli_release_iocbq(phba, cmdiocb);
2957         spin_unlock_irqrestore(phba->host->host_lock, iflags);
2958         return;
2959 }
2960
2961 int
2962 lpfc_sli_abort_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2963                     uint16_t tgt_id, uint64_t lun_id, uint32_t ctx,
2964                     lpfc_ctx_cmd abort_cmd)
2965 {
2966         struct lpfc_iocbq *iocbq;
2967         struct lpfc_iocbq *abtsiocb;
2968         IOCB_t *cmd = NULL;
2969         int errcnt = 0, ret_val = 0;
2970         int i;
2971
2972         for (i = 1; i <= phba->sli.last_iotag; i++) {
2973                 iocbq = phba->sli.iocbq_lookup[i];
2974
2975                 if (lpfc_sli_validate_fcp_iocb (iocbq, tgt_id, lun_id,
2976                                                 0, abort_cmd) != 0)
2977                         continue;
2978
2979                 /* issue ABTS for this IOCB based on iotag */
2980                 abtsiocb = lpfc_sli_get_iocbq(phba);
2981                 if (abtsiocb == NULL) {
2982                         errcnt++;
2983                         continue;
2984                 }
2985
2986                 cmd = &iocbq->iocb;
2987                 abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
2988                 abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
2989                 abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
2990                 abtsiocb->iocb.ulpLe = 1;
2991                 abtsiocb->iocb.ulpClass = cmd->ulpClass;
2992
2993                 if (phba->hba_state >= LPFC_LINK_UP)
2994                         abtsiocb->iocb.ulpCommand = CMD_ABORT_XRI_CN;
2995                 else
2996                         abtsiocb->iocb.ulpCommand = CMD_CLOSE_XRI_CN;
2997
2998                 /* Setup callback routine and issue the command. */
2999                 abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
3000                 ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
3001                 if (ret_val == IOCB_ERROR) {
3002                         lpfc_sli_release_iocbq(phba, abtsiocb);
3003                         errcnt++;
3004                         continue;
3005                 }
3006         }
3007
3008         return errcnt;
3009 }
3010
3011 static void
3012 lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
3013                         struct lpfc_iocbq *cmdiocbq,
3014                         struct lpfc_iocbq *rspiocbq)
3015 {
3016         wait_queue_head_t *pdone_q;
3017         unsigned long iflags;
3018
3019         spin_lock_irqsave(phba->host->host_lock, iflags);
3020         cmdiocbq->iocb_flag |= LPFC_IO_WAKE;
3021         if (cmdiocbq->context2 && rspiocbq)
3022                 memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
3023                        &rspiocbq->iocb, sizeof(IOCB_t));
3024
3025         pdone_q = cmdiocbq->context_un.wait_queue;
3026         spin_unlock_irqrestore(phba->host->host_lock, iflags);
3027         if (pdone_q)
3028                 wake_up(pdone_q);
3029         return;
3030 }
3031
3032 /*
3033  * Issue the caller's iocb and wait for its completion, but no longer than the
3034  * caller's timeout.  Note that iocb_flags is cleared before the
3035  * lpfc_sli_issue_call since the wake routine sets a unique value and by
3036  * definition this is a wait function.
3037  */
3038 int
3039 lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba,
3040                          struct lpfc_sli_ring * pring,
3041                          struct lpfc_iocbq * piocb,
3042                          struct lpfc_iocbq * prspiocbq,
3043                          uint32_t timeout)
3044 {
3045         DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_q);
3046         long timeleft, timeout_req = 0;
3047         int retval = IOCB_SUCCESS;
3048         uint32_t creg_val;
3049
3050         /*
3051          * If the caller has provided a response iocbq buffer, then context2
3052          * is NULL or its an error.
3053          */
3054         if (prspiocbq) {
3055                 if (piocb->context2)
3056                         return IOCB_ERROR;
3057                 piocb->context2 = prspiocbq;
3058         }
3059
3060         piocb->iocb_cmpl = lpfc_sli_wake_iocb_wait;
3061         piocb->context_un.wait_queue = &done_q;
3062         piocb->iocb_flag &= ~LPFC_IO_WAKE;
3063
3064         if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
3065                 creg_val = readl(phba->HCregaddr);
3066                 creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
3067                 writel(creg_val, phba->HCregaddr);
3068                 readl(phba->HCregaddr); /* flush */
3069         }
3070
3071         retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
3072         if (retval == IOCB_SUCCESS) {
3073                 timeout_req = timeout * HZ;
3074                 spin_unlock_irq(phba->host->host_lock);
3075                 timeleft = wait_event_timeout(done_q,
3076                                 piocb->iocb_flag & LPFC_IO_WAKE,
3077                                 timeout_req);
3078                 spin_lock_irq(phba->host->host_lock);
3079
3080                 if (piocb->iocb_flag & LPFC_IO_WAKE) {
3081                         lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3082                                         "%d:0331 IOCB wake signaled\n",
3083                                         phba->brd_no);
3084                 } else if (timeleft == 0) {
3085                         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
3086                                         "%d:0338 IOCB wait timeout error - no "
3087                                         "wake response Data x%x\n",
3088                                         phba->brd_no, timeout);
3089                         retval = IOCB_TIMEDOUT;
3090                 } else {
3091                         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
3092                                         "%d:0330 IOCB wake NOT set, "
3093                                         "Data x%x x%lx\n", phba->brd_no,
3094                                         timeout, (timeleft / jiffies));
3095                         retval = IOCB_TIMEDOUT;
3096                 }
3097         } else {
3098                 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3099                                 "%d:0332 IOCB wait issue failed, Data x%x\n",
3100                                 phba->brd_no, retval);
3101                 retval = IOCB_ERROR;
3102         }
3103
3104         if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
3105                 creg_val = readl(phba->HCregaddr);
3106                 creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
3107                 writel(creg_val, phba->HCregaddr);
3108                 readl(phba->HCregaddr); /* flush */
3109         }
3110
3111         if (prspiocbq)
3112                 piocb->context2 = NULL;
3113
3114         piocb->context_un.wait_queue = NULL;
3115         piocb->iocb_cmpl = NULL;
3116         return retval;
3117 }
3118
3119 int
3120 lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq,
3121                          uint32_t timeout)
3122 {
3123         DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_q);
3124         int retval;
3125
3126         /* The caller must leave context1 empty. */
3127         if (pmboxq->context1 != 0) {
3128                 return (MBX_NOT_FINISHED);
3129         }
3130
3131         /* setup wake call as IOCB callback */
3132         pmboxq->mbox_cmpl = lpfc_sli_wake_mbox_wait;
3133         /* setup context field to pass wait_queue pointer to wake function  */
3134         pmboxq->context1 = &done_q;
3135
3136         /* now issue the command */
3137         retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
3138
3139         if (retval == MBX_BUSY || retval == MBX_SUCCESS) {
3140                 wait_event_interruptible_timeout(done_q,
3141                                 pmboxq->mbox_flag & LPFC_MBX_WAKE,
3142                                 timeout * HZ);
3143
3144                 pmboxq->context1 = NULL;
3145                 /*
3146                  * if LPFC_MBX_WAKE flag is set the mailbox is completed
3147                  * else do not free the resources.
3148                  */
3149                 if (pmboxq->mbox_flag & LPFC_MBX_WAKE)
3150                         retval = MBX_SUCCESS;
3151                 else
3152                         retval = MBX_TIMEOUT;
3153         }
3154
3155         return retval;
3156 }
3157
3158 int
3159 lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
3160 {
3161         int i = 0;
3162
3163         while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !phba->stopped) {
3164                 if (i++ > LPFC_MBOX_TMO * 1000)
3165                         return 1;
3166
3167                 if (lpfc_sli_handle_mb_event(phba) == 0)
3168                         i = 0;
3169
3170                 msleep(1);
3171         }
3172
3173         return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0;
3174 }
3175
3176 irqreturn_t
3177 lpfc_intr_handler(int irq, void *dev_id)
3178 {
3179         struct lpfc_hba *phba;
3180         uint32_t ha_copy;
3181         uint32_t work_ha_copy;
3182         unsigned long status;
3183         int i;
3184         uint32_t control;
3185
3186         /*
3187          * Get the driver's phba structure from the dev_id and
3188          * assume the HBA is not interrupting.
3189          */
3190         phba = (struct lpfc_hba *) dev_id;
3191
3192         if (unlikely(!phba))
3193                 return IRQ_NONE;
3194
3195         /* If the pci channel is offline, ignore all the interrupts. */
3196         if (unlikely(pci_channel_offline(phba->pcidev)))
3197                 return IRQ_NONE;
3198
3199         phba->sli.slistat.sli_intr++;
3200
3201         /*
3202          * Call the HBA to see if it is interrupting.  If not, don't claim
3203          * the interrupt
3204          */
3205
3206         /* Ignore all interrupts during initialization. */
3207         if (unlikely(phba->hba_state < LPFC_LINK_DOWN))
3208                 return IRQ_NONE;
3209
3210         /*
3211          * Read host attention register to determine interrupt source
3212          * Clear Attention Sources, except Error Attention (to
3213          * preserve status) and Link Attention
3214          */
3215         spin_lock(phba->host->host_lock);
3216         ha_copy = readl(phba->HAregaddr);
3217         /* If somebody is waiting to handle an eratt don't process it
3218          * here.  The brdkill function will do this.
3219          */
3220         if (phba->fc_flag & FC_IGNORE_ERATT)
3221                 ha_copy &= ~HA_ERATT;
3222         writel((ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
3223         readl(phba->HAregaddr); /* flush */
3224         spin_unlock(phba->host->host_lock);
3225
3226         if (unlikely(!ha_copy))
3227                 return IRQ_NONE;
3228
3229         work_ha_copy = ha_copy & phba->work_ha_mask;
3230
3231         if (unlikely(work_ha_copy)) {
3232                 if (work_ha_copy & HA_LATT) {
3233                         if (phba->sli.sli_flag & LPFC_PROCESS_LA) {
3234                                 /*
3235                                  * Turn off Link Attention interrupts
3236                                  * until CLEAR_LA done
3237                                  */
3238                                 spin_lock(phba->host->host_lock);
3239                                 phba->sli.sli_flag &= ~LPFC_PROCESS_LA;
3240                                 control = readl(phba->HCregaddr);
3241                                 control &= ~HC_LAINT_ENA;
3242                                 writel(control, phba->HCregaddr);
3243                                 readl(phba->HCregaddr); /* flush */
3244                                 spin_unlock(phba->host->host_lock);
3245                         }
3246                         else
3247                                 work_ha_copy &= ~HA_LATT;
3248                 }
3249
3250                 if (work_ha_copy & ~(HA_ERATT|HA_MBATT|HA_LATT)) {
3251                         for (i = 0; i < phba->sli.num_rings; i++) {
3252                                 if (work_ha_copy & (HA_RXATT << (4*i))) {
3253                                         /*
3254                                          * Turn off Slow Rings interrupts
3255                                          */
3256                                         spin_lock(phba->host->host_lock);
3257                                         control = readl(phba->HCregaddr);
3258                                         control &= ~(HC_R0INT_ENA << i);
3259                                         writel(control, phba->HCregaddr);
3260                                         readl(phba->HCregaddr); /* flush */
3261                                         spin_unlock(phba->host->host_lock);
3262                                 }
3263                         }
3264                 }
3265
3266                 if (work_ha_copy & HA_ERATT) {
3267                         phba->hba_state = LPFC_HBA_ERROR;
3268                         /*
3269                          * There was a link/board error.  Read the
3270                          * status register to retrieve the error event
3271                          * and process it.
3272                          */
3273                         phba->sli.slistat.err_attn_event++;
3274                         /* Save status info */
3275                         phba->work_hs = readl(phba->HSregaddr);
3276                         phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
3277                         phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
3278
3279                         /* Clear Chip error bit */
3280                         writel(HA_ERATT, phba->HAregaddr);
3281                         readl(phba->HAregaddr); /* flush */
3282                         phba->stopped = 1;
3283                 }
3284
3285                 spin_lock(phba->host->host_lock);
3286                 phba->work_ha |= work_ha_copy;
3287                 if (phba->work_wait)
3288                         wake_up(phba->work_wait);
3289                 spin_unlock(phba->host->host_lock);
3290         }
3291
3292         ha_copy &= ~(phba->work_ha_mask);
3293
3294         /*
3295          * Process all events on FCP ring.  Take the optimized path for
3296          * FCP IO.  Any other IO is slow path and is handled by
3297          * the worker thread.
3298          */
3299         status = (ha_copy & (HA_RXMASK  << (4*LPFC_FCP_RING)));
3300         status >>= (4*LPFC_FCP_RING);
3301         if (status & HA_RXATT)
3302                 lpfc_sli_handle_fast_ring_event(phba,
3303                                                 &phba->sli.ring[LPFC_FCP_RING],
3304                                                 status);
3305
3306         if (phba->cfg_multi_ring_support == 2) {
3307                 /*
3308                  * Process all events on extra ring.  Take the optimized path
3309                  * for extra ring IO.  Any other IO is slow path and is handled
3310                  * by the worker thread.
3311                  */
3312                 status = (ha_copy & (HA_RXMASK  << (4*LPFC_EXTRA_RING)));
3313                 status >>= (4*LPFC_EXTRA_RING);
3314                 if (status & HA_RXATT) {
3315                         lpfc_sli_handle_fast_ring_event(phba,
3316                                         &phba->sli.ring[LPFC_EXTRA_RING],
3317                                         status);
3318                 }
3319         }
3320         return IRQ_HANDLED;
3321
3322 } /* lpfc_intr_handler */