[SCSI] libfc: cache align struct fc_fcp_pkt fields
[firefly-linux-kernel-4.4.55.git] / drivers / scsi / libfc / fc_fcp.c
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37
38 #include <scsi/fc/fc_fc2.h>
39
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42
43 #include "fc_libfc.h"
44
45 static struct kmem_cache *scsi_pkt_cachep;
46
47 /* SRB state definitions */
48 #define FC_SRB_FREE             0               /* cmd is free */
49 #define FC_SRB_CMD_SENT         (1 << 0)        /* cmd has been sent */
50 #define FC_SRB_RCV_STATUS       (1 << 1)        /* response has arrived */
51 #define FC_SRB_ABORT_PENDING    (1 << 2)        /* cmd abort sent to device */
52 #define FC_SRB_ABORTED          (1 << 3)        /* abort acknowledged */
53 #define FC_SRB_DISCONTIG        (1 << 4)        /* non-sequential data recvd */
54 #define FC_SRB_COMPL            (1 << 5)        /* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)      /* timer function processing */
56
57 #define FC_SRB_READ             (1 << 1)
58 #define FC_SRB_WRITE            (1 << 0)
59
60 /*
61  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
62  */
63 #define CMD_SP(Cmnd)                ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
64 #define CMD_ENTRY_STATUS(Cmnd)      ((Cmnd)->SCp.have_data_in)
65 #define CMD_COMPL_STATUS(Cmnd)      ((Cmnd)->SCp.this_residual)
66 #define CMD_SCSI_STATUS(Cmnd)       ((Cmnd)->SCp.Status)
67 #define CMD_RESID_LEN(Cmnd)         ((Cmnd)->SCp.buffers_residual)
68
69 /**
70  * struct fc_fcp_internal - FCP layer internal data
71  * @scsi_pkt_pool: Memory pool to draw FCP packets from
72  * @scsi_queue_lock: Protects the scsi_pkt_queue
73  * @scsi_pkt_queue: Current FCP packets
74  * @last_can_queue_ramp_down_time: ramp down time
75  * @last_can_queue_ramp_up_time: ramp up time
76  * @max_can_queue: max can_queue size
77  */
78 struct fc_fcp_internal {
79         mempool_t               *scsi_pkt_pool;
80         spinlock_t              scsi_queue_lock;
81         struct list_head        scsi_pkt_queue;
82         unsigned long           last_can_queue_ramp_down_time;
83         unsigned long           last_can_queue_ramp_up_time;
84         int                     max_can_queue;
85 };
86
87 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
88
89 /*
90  * function prototypes
91  * FC scsi I/O related functions
92  */
93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
100 static void fc_fcp_timeout(unsigned long);
101 static void fc_fcp_rec(struct fc_fcp_pkt *);
102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
104 static void fc_io_compl(struct fc_fcp_pkt *);
105
106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
109
110 /*
111  * command status codes
112  */
113 #define FC_COMPLETE             0
114 #define FC_CMD_ABORTED          1
115 #define FC_CMD_RESET            2
116 #define FC_CMD_PLOGO            3
117 #define FC_SNS_RCV              4
118 #define FC_TRANS_ERR            5
119 #define FC_DATA_OVRRUN          6
120 #define FC_DATA_UNDRUN          7
121 #define FC_ERROR                8
122 #define FC_HRD_ERROR            9
123 #define FC_CRC_ERROR            10
124 #define FC_TIMED_OUT            11
125
126 /*
127  * Error recovery timeout values.
128  */
129 #define FC_SCSI_TM_TOV          (10 * HZ)
130 #define FC_HOST_RESET_TIMEOUT   (30 * HZ)
131 #define FC_CAN_QUEUE_PERIOD     (60 * HZ)
132
133 #define FC_MAX_ERROR_CNT        5
134 #define FC_MAX_RECOV_RETRY      3
135
136 #define FC_FCP_DFLT_QUEUE_DEPTH 32
137
138 /**
139  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
140  * @lport: The local port that the FCP packet is for
141  * @gfp:   GFP flags for allocation
142  *
143  * Return value: fcp_pkt structure or null on allocation failure.
144  * Context:      Can be called from process context, no lock is required.
145  */
146 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
147 {
148         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
149         struct fc_fcp_pkt *fsp;
150
151         fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
152         if (fsp) {
153                 memset(fsp, 0, sizeof(*fsp));
154                 fsp->lp = lport;
155                 fsp->xfer_ddp = FC_XID_UNKNOWN;
156                 atomic_set(&fsp->ref_cnt, 1);
157                 init_timer(&fsp->timer);
158                 INIT_LIST_HEAD(&fsp->list);
159                 spin_lock_init(&fsp->scsi_pkt_lock);
160         }
161         return fsp;
162 }
163
164 /**
165  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
166  * @fsp: The FCP packet to be released
167  *
168  * Context: Can be called from process or interrupt context,
169  *          no lock is required.
170  */
171 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
172 {
173         if (atomic_dec_and_test(&fsp->ref_cnt)) {
174                 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
175
176                 mempool_free(fsp, si->scsi_pkt_pool);
177         }
178 }
179
180 /**
181  * fc_fcp_pkt_hold() - Hold a fcp_pkt
182  * @fsp: The FCP packet to be held
183  */
184 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
185 {
186         atomic_inc(&fsp->ref_cnt);
187 }
188
189 /**
190  * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
191  * @seq: The sequence that the FCP packet is on (required by destructor API)
192  * @fsp: The FCP packet to be released
193  *
194  * This routine is called by a destructor callback in the exch_seq_send()
195  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
196  * argument even though it is not used by this routine.
197  *
198  * Context: No locking required.
199  */
200 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
201 {
202         fc_fcp_pkt_release(fsp);
203 }
204
205 /**
206  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
207  * @fsp: The FCP packet to be locked and incremented
208  *
209  * We should only return error if we return a command to SCSI-ml before
210  * getting a response. This can happen in cases where we send a abort, but
211  * do not wait for the response and the abort and command can be passing
212  * each other on the wire/network-layer.
213  *
214  * Note: this function locks the packet and gets a reference to allow
215  * callers to call the completion function while the lock is held and
216  * not have to worry about the packets refcount.
217  *
218  * TODO: Maybe we should just have callers grab/release the lock and
219  * have a function that they call to verify the fsp and grab a ref if
220  * needed.
221  */
222 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
223 {
224         spin_lock_bh(&fsp->scsi_pkt_lock);
225         if (fsp->state & FC_SRB_COMPL) {
226                 spin_unlock_bh(&fsp->scsi_pkt_lock);
227                 return -EPERM;
228         }
229
230         fc_fcp_pkt_hold(fsp);
231         return 0;
232 }
233
234 /**
235  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
236  *                       reference count
237  * @fsp: The FCP packet to be unlocked and decremented
238  */
239 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
240 {
241         spin_unlock_bh(&fsp->scsi_pkt_lock);
242         fc_fcp_pkt_release(fsp);
243 }
244
245 /**
246  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
247  * @fsp:   The FCP packet to start a timer for
248  * @delay: The timeout period in jiffies
249  */
250 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
251 {
252         if (!(fsp->state & FC_SRB_COMPL))
253                 mod_timer(&fsp->timer, jiffies + delay);
254 }
255
256 /**
257  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
258  *                       fcp_pkt
259  * @fsp: The FCP packet to abort exchanges on
260  */
261 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
262 {
263         if (!fsp->seq_ptr)
264                 return -EINVAL;
265
266         fsp->state |= FC_SRB_ABORT_PENDING;
267         return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
268 }
269
270 /**
271  * fc_fcp_retry_cmd() - Retry a fcp_pkt
272  * @fsp: The FCP packet to be retried
273  *
274  * Sets the status code to be FC_ERROR and then calls
275  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
276  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
277  * The SCSI-ml will retry the command.
278  */
279 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
280 {
281         if (fsp->seq_ptr) {
282                 fsp->lp->tt.exch_done(fsp->seq_ptr);
283                 fsp->seq_ptr = NULL;
284         }
285
286         fsp->state &= ~FC_SRB_ABORT_PENDING;
287         fsp->io_status = 0;
288         fsp->status_code = FC_ERROR;
289         fc_fcp_complete_locked(fsp);
290 }
291
292 /**
293  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
294  * @fsp: The FCP packet that will manage the DDP frames
295  * @xid: The XID that will be used for the DDP exchange
296  */
297 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
298 {
299         struct fc_lport *lport;
300
301         lport = fsp->lp;
302         if ((fsp->req_flags & FC_SRB_READ) &&
303             (lport->lro_enabled) && (lport->tt.ddp_setup)) {
304                 if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
305                                         scsi_sg_count(fsp->cmd)))
306                         fsp->xfer_ddp = xid;
307         }
308 }
309
310 /**
311  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
312  *                     DDP related resources for a fcp_pkt
313  * @fsp: The FCP packet that DDP had been used on
314  */
315 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
316 {
317         struct fc_lport *lport;
318
319         if (!fsp)
320                 return;
321
322         if (fsp->xfer_ddp == FC_XID_UNKNOWN)
323                 return;
324
325         lport = fsp->lp;
326         if (lport->tt.ddp_done) {
327                 fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
328                 fsp->xfer_ddp = FC_XID_UNKNOWN;
329         }
330 }
331
332 /**
333  * fc_fcp_can_queue_ramp_up() - increases can_queue
334  * @lport: lport to ramp up can_queue
335  */
336 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
337 {
338         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
339         unsigned long flags;
340         int can_queue;
341
342         spin_lock_irqsave(lport->host->host_lock, flags);
343
344         if (si->last_can_queue_ramp_up_time &&
345             (time_before(jiffies, si->last_can_queue_ramp_up_time +
346                          FC_CAN_QUEUE_PERIOD)))
347                 goto unlock;
348
349         if (time_before(jiffies, si->last_can_queue_ramp_down_time +
350                         FC_CAN_QUEUE_PERIOD))
351                 goto unlock;
352
353         si->last_can_queue_ramp_up_time = jiffies;
354
355         can_queue = lport->host->can_queue << 1;
356         if (can_queue >= si->max_can_queue) {
357                 can_queue = si->max_can_queue;
358                 si->last_can_queue_ramp_down_time = 0;
359         }
360         lport->host->can_queue = can_queue;
361         shost_printk(KERN_ERR, lport->host, "libfc: increased "
362                      "can_queue to %d.\n", can_queue);
363
364 unlock:
365         spin_unlock_irqrestore(lport->host->host_lock, flags);
366 }
367
368 /**
369  * fc_fcp_can_queue_ramp_down() - reduces can_queue
370  * @lport: lport to reduce can_queue
371  *
372  * If we are getting memory allocation failures, then we may
373  * be trying to execute too many commands. We let the running
374  * commands complete or timeout, then try again with a reduced
375  * can_queue. Eventually we will hit the point where we run
376  * on all reserved structs.
377  */
378 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
379 {
380         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
381         unsigned long flags;
382         int can_queue;
383
384         spin_lock_irqsave(lport->host->host_lock, flags);
385
386         if (si->last_can_queue_ramp_down_time &&
387             (time_before(jiffies, si->last_can_queue_ramp_down_time +
388                          FC_CAN_QUEUE_PERIOD)))
389                 goto unlock;
390
391         si->last_can_queue_ramp_down_time = jiffies;
392
393         can_queue = lport->host->can_queue;
394         can_queue >>= 1;
395         if (!can_queue)
396                 can_queue = 1;
397         lport->host->can_queue = can_queue;
398         shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
399                      "Reducing can_queue to %d.\n", can_queue);
400
401 unlock:
402         spin_unlock_irqrestore(lport->host->host_lock, flags);
403 }
404
405 /*
406  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
407  * @lport:      fc lport struct
408  * @len:        payload length
409  *
410  * Allocates fc_frame structure and buffer but if fails to allocate
411  * then reduce can_queue.
412  */
413 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
414                                                   size_t len)
415 {
416         struct fc_frame *fp;
417
418         fp = fc_frame_alloc(lport, len);
419         if (likely(fp))
420                 return fp;
421
422         /* error case */
423         fc_fcp_can_queue_ramp_down(lport);
424         return NULL;
425 }
426
427 /**
428  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
429  * @fsp: The FCP packet the data is on
430  * @fp:  The data frame
431  */
432 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
433 {
434         struct scsi_cmnd *sc = fsp->cmd;
435         struct fc_lport *lport = fsp->lp;
436         struct fcoe_dev_stats *stats;
437         struct fc_frame_header *fh;
438         size_t start_offset;
439         size_t offset;
440         u32 crc;
441         u32 copy_len = 0;
442         size_t len;
443         void *buf;
444         struct scatterlist *sg;
445         u32 nents;
446         u8 host_bcode = FC_COMPLETE;
447
448         fh = fc_frame_header_get(fp);
449         offset = ntohl(fh->fh_parm_offset);
450         start_offset = offset;
451         len = fr_len(fp) - sizeof(*fh);
452         buf = fc_frame_payload_get(fp, 0);
453
454         /*
455          * if this I/O is ddped then clear it and initiate recovery since data
456          * frames are expected to be placed directly in that case.
457          *
458          * Indicate error to scsi-ml because something went wrong with the
459          * ddp handling to get us here.
460          */
461         if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
462                 fc_fcp_ddp_done(fsp);
463                 FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
464                 host_bcode = FC_ERROR;
465                 goto err;
466         }
467         if (offset + len > fsp->data_len) {
468                 /* this should never happen */
469                 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
470                     fc_frame_crc_check(fp))
471                         goto crc_err;
472                 FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
473                            "data_len %x\n", len, offset, fsp->data_len);
474
475                 /* Data is corrupted indicate scsi-ml should retry */
476                 host_bcode = FC_DATA_OVRRUN;
477                 goto err;
478         }
479         if (offset != fsp->xfer_len)
480                 fsp->state |= FC_SRB_DISCONTIG;
481
482         sg = scsi_sglist(sc);
483         nents = scsi_sg_count(sc);
484
485         if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
486                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
487                                                     &offset, KM_SOFTIRQ0, NULL);
488         } else {
489                 crc = crc32(~0, (u8 *) fh, sizeof(*fh));
490                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
491                                                     &offset, KM_SOFTIRQ0, &crc);
492                 buf = fc_frame_payload_get(fp, 0);
493                 if (len % 4)
494                         crc = crc32(crc, buf + len, 4 - (len % 4));
495
496                 if (~crc != le32_to_cpu(fr_crc(fp))) {
497 crc_err:
498                         stats = per_cpu_ptr(lport->dev_stats, get_cpu());
499                         stats->ErrorFrames++;
500                         /* per cpu count, not total count, but OK for limit */
501                         if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
502                                 printk(KERN_WARNING "libfc: CRC error on data "
503                                        "frame for port (%6.6x)\n",
504                                        lport->port_id);
505                         put_cpu();
506                         /*
507                          * Assume the frame is total garbage.
508                          * We may have copied it over the good part
509                          * of the buffer.
510                          * If so, we need to retry the entire operation.
511                          * Otherwise, ignore it.
512                          */
513                         if (fsp->state & FC_SRB_DISCONTIG) {
514                                 host_bcode = FC_CRC_ERROR;
515                                 goto err;
516                         }
517                         return;
518                 }
519         }
520
521         if (fsp->xfer_contig_end == start_offset)
522                 fsp->xfer_contig_end += copy_len;
523         fsp->xfer_len += copy_len;
524
525         /*
526          * In the very rare event that this data arrived after the response
527          * and completes the transfer, call the completion handler.
528          */
529         if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
530             fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
531                 fc_fcp_complete_locked(fsp);
532         return;
533 err:
534         fc_fcp_recovery(fsp, host_bcode);
535 }
536
537 /**
538  * fc_fcp_send_data() - Send SCSI data to a target
539  * @fsp:      The FCP packet the data is on
540  * @sp:       The sequence the data is to be sent on
541  * @offset:   The starting offset for this data request
542  * @seq_blen: The burst length for this data request
543  *
544  * Called after receiving a Transfer Ready data descriptor.
545  * If the LLD is capable of sequence offload then send down the
546  * seq_blen amount of data in single frame, otherwise send
547  * multiple frames of the maximum frame payload supported by
548  * the target port.
549  */
550 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
551                             size_t offset, size_t seq_blen)
552 {
553         struct fc_exch *ep;
554         struct scsi_cmnd *sc;
555         struct scatterlist *sg;
556         struct fc_frame *fp = NULL;
557         struct fc_lport *lport = fsp->lp;
558         struct page *page;
559         size_t remaining;
560         size_t t_blen;
561         size_t tlen;
562         size_t sg_bytes;
563         size_t frame_offset, fh_parm_offset;
564         size_t off;
565         int error;
566         void *data = NULL;
567         void *page_addr;
568         int using_sg = lport->sg_supp;
569         u32 f_ctl;
570
571         WARN_ON(seq_blen <= 0);
572         if (unlikely(offset + seq_blen > fsp->data_len)) {
573                 /* this should never happen */
574                 FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
575                            "offset %zx\n", seq_blen, offset);
576                 fc_fcp_send_abort(fsp);
577                 return 0;
578         } else if (offset != fsp->xfer_len) {
579                 /* Out of Order Data Request - no problem, but unexpected. */
580                 FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
581                            "seq_blen %zx offset %zx\n", seq_blen, offset);
582         }
583
584         /*
585          * if LLD is capable of seq_offload then set transport
586          * burst length (t_blen) to seq_blen, otherwise set t_blen
587          * to max FC frame payload previously set in fsp->max_payload.
588          */
589         t_blen = fsp->max_payload;
590         if (lport->seq_offload) {
591                 t_blen = min(seq_blen, (size_t)lport->lso_max);
592                 FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
593                            fsp, seq_blen, lport->lso_max, t_blen);
594         }
595
596         if (t_blen > 512)
597                 t_blen &= ~(512 - 1);   /* round down to block size */
598         sc = fsp->cmd;
599
600         remaining = seq_blen;
601         fh_parm_offset = frame_offset = offset;
602         tlen = 0;
603         seq = lport->tt.seq_start_next(seq);
604         f_ctl = FC_FC_REL_OFF;
605         WARN_ON(!seq);
606
607         sg = scsi_sglist(sc);
608
609         while (remaining > 0 && sg) {
610                 if (offset >= sg->length) {
611                         offset -= sg->length;
612                         sg = sg_next(sg);
613                         continue;
614                 }
615                 if (!fp) {
616                         tlen = min(t_blen, remaining);
617
618                         /*
619                          * TODO.  Temporary workaround.  fc_seq_send() can't
620                          * handle odd lengths in non-linear skbs.
621                          * This will be the final fragment only.
622                          */
623                         if (tlen % 4)
624                                 using_sg = 0;
625                         fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
626                         if (!fp)
627                                 return -ENOMEM;
628
629                         data = fc_frame_header_get(fp) + 1;
630                         fh_parm_offset = frame_offset;
631                         fr_max_payload(fp) = fsp->max_payload;
632                 }
633
634                 off = offset + sg->offset;
635                 sg_bytes = min(tlen, sg->length - offset);
636                 sg_bytes = min(sg_bytes,
637                                (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
638                 page = sg_page(sg) + (off >> PAGE_SHIFT);
639                 if (using_sg) {
640                         get_page(page);
641                         skb_fill_page_desc(fp_skb(fp),
642                                            skb_shinfo(fp_skb(fp))->nr_frags,
643                                            page, off & ~PAGE_MASK, sg_bytes);
644                         fp_skb(fp)->data_len += sg_bytes;
645                         fr_len(fp) += sg_bytes;
646                         fp_skb(fp)->truesize += PAGE_SIZE;
647                 } else {
648                         /*
649                          * The scatterlist item may be bigger than PAGE_SIZE,
650                          * but we must not cross pages inside the kmap.
651                          */
652                         page_addr = kmap_atomic(page, KM_SOFTIRQ0);
653                         memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
654                                sg_bytes);
655                         kunmap_atomic(page_addr, KM_SOFTIRQ0);
656                         data += sg_bytes;
657                 }
658                 offset += sg_bytes;
659                 frame_offset += sg_bytes;
660                 tlen -= sg_bytes;
661                 remaining -= sg_bytes;
662
663                 if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
664                     (tlen))
665                         continue;
666
667                 /*
668                  * Send sequence with transfer sequence initiative in case
669                  * this is last FCP frame of the sequence.
670                  */
671                 if (remaining == 0)
672                         f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
673
674                 ep = fc_seq_exch(seq);
675                 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
676                                FC_TYPE_FCP, f_ctl, fh_parm_offset);
677
678                 /*
679                  * send fragment using for a sequence.
680                  */
681                 error = lport->tt.seq_send(lport, seq, fp);
682                 if (error) {
683                         WARN_ON(1);             /* send error should be rare */
684                         return error;
685                 }
686                 fp = NULL;
687         }
688         fsp->xfer_len += seq_blen;      /* premature count? */
689         return 0;
690 }
691
692 /**
693  * fc_fcp_abts_resp() - Receive an ABTS response
694  * @fsp: The FCP packet that is being aborted
695  * @fp:  The response frame
696  */
697 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
698 {
699         int ba_done = 1;
700         struct fc_ba_rjt *brp;
701         struct fc_frame_header *fh;
702
703         fh = fc_frame_header_get(fp);
704         switch (fh->fh_r_ctl) {
705         case FC_RCTL_BA_ACC:
706                 break;
707         case FC_RCTL_BA_RJT:
708                 brp = fc_frame_payload_get(fp, sizeof(*brp));
709                 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
710                         break;
711                 /* fall thru */
712         default:
713                 /*
714                  * we will let the command timeout
715                  * and scsi-ml recover in this case,
716                  * therefore cleared the ba_done flag.
717                  */
718                 ba_done = 0;
719         }
720
721         if (ba_done) {
722                 fsp->state |= FC_SRB_ABORTED;
723                 fsp->state &= ~FC_SRB_ABORT_PENDING;
724
725                 if (fsp->wait_for_comp)
726                         complete(&fsp->tm_done);
727                 else
728                         fc_fcp_complete_locked(fsp);
729         }
730 }
731
732 /**
733  * fc_fcp_recv() - Receive an FCP frame
734  * @seq: The sequence the frame is on
735  * @fp:  The received frame
736  * @arg: The related FCP packet
737  *
738  * Context: Called from Soft IRQ context. Can not be called
739  *          holding the FCP packet list lock.
740  */
741 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
742 {
743         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
744         struct fc_lport *lport = fsp->lp;
745         struct fc_frame_header *fh;
746         struct fcp_txrdy *dd;
747         u8 r_ctl;
748         int rc = 0;
749
750         if (IS_ERR(fp)) {
751                 fc_fcp_error(fsp, fp);
752                 return;
753         }
754
755         fh = fc_frame_header_get(fp);
756         r_ctl = fh->fh_r_ctl;
757
758         if (lport->state != LPORT_ST_READY)
759                 goto out;
760         if (fc_fcp_lock_pkt(fsp))
761                 goto out;
762
763         if (fh->fh_type == FC_TYPE_BLS) {
764                 fc_fcp_abts_resp(fsp, fp);
765                 goto unlock;
766         }
767
768         if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
769                 goto unlock;
770
771         if (r_ctl == FC_RCTL_DD_DATA_DESC) {
772                 /*
773                  * received XFER RDY from the target
774                  * need to send data to the target
775                  */
776                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
777                 dd = fc_frame_payload_get(fp, sizeof(*dd));
778                 WARN_ON(!dd);
779
780                 rc = fc_fcp_send_data(fsp, seq,
781                                       (size_t) ntohl(dd->ft_data_ro),
782                                       (size_t) ntohl(dd->ft_burst_len));
783                 if (!rc)
784                         seq->rec_data = fsp->xfer_len;
785         } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
786                 /*
787                  * received a DATA frame
788                  * next we will copy the data to the system buffer
789                  */
790                 WARN_ON(fr_len(fp) < sizeof(*fh));      /* len may be 0 */
791                 fc_fcp_recv_data(fsp, fp);
792                 seq->rec_data = fsp->xfer_contig_end;
793         } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
794                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
795
796                 fc_fcp_resp(fsp, fp);
797         } else {
798                 FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
799         }
800 unlock:
801         fc_fcp_unlock_pkt(fsp);
802 out:
803         fc_frame_free(fp);
804 }
805
806 /**
807  * fc_fcp_resp() - Handler for FCP responses
808  * @fsp: The FCP packet the response is for
809  * @fp:  The response frame
810  */
811 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
812 {
813         struct fc_frame_header *fh;
814         struct fcp_resp *fc_rp;
815         struct fcp_resp_ext *rp_ex;
816         struct fcp_resp_rsp_info *fc_rp_info;
817         u32 plen;
818         u32 expected_len;
819         u32 respl = 0;
820         u32 snsl = 0;
821         u8 flags = 0;
822
823         plen = fr_len(fp);
824         fh = (struct fc_frame_header *)fr_hdr(fp);
825         if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
826                 goto len_err;
827         plen -= sizeof(*fh);
828         fc_rp = (struct fcp_resp *)(fh + 1);
829         fsp->cdb_status = fc_rp->fr_status;
830         flags = fc_rp->fr_flags;
831         fsp->scsi_comp_flags = flags;
832         expected_len = fsp->data_len;
833
834         /* if ddp, update xfer len */
835         fc_fcp_ddp_done(fsp);
836
837         if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
838                 rp_ex = (void *)(fc_rp + 1);
839                 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
840                         if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
841                                 goto len_err;
842                         fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
843                         if (flags & FCP_RSP_LEN_VAL) {
844                                 respl = ntohl(rp_ex->fr_rsp_len);
845                                 if (respl != sizeof(*fc_rp_info))
846                                         goto len_err;
847                                 if (fsp->wait_for_comp) {
848                                         /* Abuse cdb_status for rsp code */
849                                         fsp->cdb_status = fc_rp_info->rsp_code;
850                                         complete(&fsp->tm_done);
851                                         /*
852                                          * tmfs will not have any scsi cmd so
853                                          * exit here
854                                          */
855                                         return;
856                                 }
857                         }
858                         if (flags & FCP_SNS_LEN_VAL) {
859                                 snsl = ntohl(rp_ex->fr_sns_len);
860                                 if (snsl > SCSI_SENSE_BUFFERSIZE)
861                                         snsl = SCSI_SENSE_BUFFERSIZE;
862                                 memcpy(fsp->cmd->sense_buffer,
863                                        (char *)fc_rp_info + respl, snsl);
864                         }
865                 }
866                 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
867                         if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
868                                 goto len_err;
869                         if (flags & FCP_RESID_UNDER) {
870                                 fsp->scsi_resid = ntohl(rp_ex->fr_resid);
871                                 /*
872                                  * The cmnd->underflow is the minimum number of
873                                  * bytes that must be transferred for this
874                                  * command.  Provided a sense condition is not
875                                  * present, make sure the actual amount
876                                  * transferred is at least the underflow value
877                                  * or fail.
878                                  */
879                                 if (!(flags & FCP_SNS_LEN_VAL) &&
880                                     (fc_rp->fr_status == 0) &&
881                                     (scsi_bufflen(fsp->cmd) -
882                                      fsp->scsi_resid) < fsp->cmd->underflow)
883                                         goto err;
884                                 expected_len -= fsp->scsi_resid;
885                         } else {
886                                 fsp->status_code = FC_ERROR;
887                         }
888                 }
889         }
890         fsp->state |= FC_SRB_RCV_STATUS;
891
892         /*
893          * Check for missing or extra data frames.
894          */
895         if (unlikely(fsp->xfer_len != expected_len)) {
896                 if (fsp->xfer_len < expected_len) {
897                         /*
898                          * Some data may be queued locally,
899                          * Wait a at least one jiffy to see if it is delivered.
900                          * If this expires without data, we may do SRR.
901                          */
902                         fc_fcp_timer_set(fsp, 2);
903                         return;
904                 }
905                 fsp->status_code = FC_DATA_OVRRUN;
906                 FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
907                            "len %x, data len %x\n",
908                            fsp->rport->port_id,
909                            fsp->xfer_len, expected_len, fsp->data_len);
910         }
911         fc_fcp_complete_locked(fsp);
912         return;
913
914 len_err:
915         FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
916                    "snsl %u\n", flags, fr_len(fp), respl, snsl);
917 err:
918         fsp->status_code = FC_ERROR;
919         fc_fcp_complete_locked(fsp);
920 }
921
922 /**
923  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
924  *                            fcp_pkt lock held
925  * @fsp: The FCP packet to be completed
926  *
927  * This function may sleep if a timer is pending. The packet lock must be
928  * held, and the host lock must not be held.
929  */
930 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
931 {
932         struct fc_lport *lport = fsp->lp;
933         struct fc_seq *seq;
934         struct fc_exch *ep;
935         u32 f_ctl;
936
937         if (fsp->state & FC_SRB_ABORT_PENDING)
938                 return;
939
940         if (fsp->state & FC_SRB_ABORTED) {
941                 if (!fsp->status_code)
942                         fsp->status_code = FC_CMD_ABORTED;
943         } else {
944                 /*
945                  * Test for transport underrun, independent of response
946                  * underrun status.
947                  */
948                 if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
949                     (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
950                      fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
951                         fsp->status_code = FC_DATA_UNDRUN;
952                         fsp->io_status = 0;
953                 }
954         }
955
956         seq = fsp->seq_ptr;
957         if (seq) {
958                 fsp->seq_ptr = NULL;
959                 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
960                         struct fc_frame *conf_frame;
961                         struct fc_seq *csp;
962
963                         csp = lport->tt.seq_start_next(seq);
964                         conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
965                         if (conf_frame) {
966                                 f_ctl = FC_FC_SEQ_INIT;
967                                 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
968                                 ep = fc_seq_exch(seq);
969                                 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
970                                                ep->did, ep->sid,
971                                                FC_TYPE_FCP, f_ctl, 0);
972                                 lport->tt.seq_send(lport, csp, conf_frame);
973                         }
974                 }
975                 lport->tt.exch_done(seq);
976         }
977         /*
978          * Some resets driven by SCSI are not I/Os and do not have
979          * SCSI commands associated with the requests. We should not
980          * call I/O completion if we do not have a SCSI command.
981          */
982         if (fsp->cmd)
983                 fc_io_compl(fsp);
984 }
985
986 /**
987  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
988  * @fsp:   The FCP packet whose exchanges should be canceled
989  * @error: The reason for the cancellation
990  */
991 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
992 {
993         struct fc_lport *lport = fsp->lp;
994
995         if (fsp->seq_ptr) {
996                 lport->tt.exch_done(fsp->seq_ptr);
997                 fsp->seq_ptr = NULL;
998         }
999         fsp->status_code = error;
1000 }
1001
1002 /**
1003  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1004  * @lport: The local port whose exchanges should be canceled
1005  * @id:    The target's ID
1006  * @lun:   The LUN
1007  * @error: The reason for cancellation
1008  *
1009  * If lun or id is -1, they are ignored.
1010  */
1011 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1012                                     unsigned int lun, int error)
1013 {
1014         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1015         struct fc_fcp_pkt *fsp;
1016         struct scsi_cmnd *sc_cmd;
1017         unsigned long flags;
1018
1019         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1020 restart:
1021         list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1022                 sc_cmd = fsp->cmd;
1023                 if (id != -1 && scmd_id(sc_cmd) != id)
1024                         continue;
1025
1026                 if (lun != -1 && sc_cmd->device->lun != lun)
1027                         continue;
1028
1029                 fc_fcp_pkt_hold(fsp);
1030                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1031
1032                 if (!fc_fcp_lock_pkt(fsp)) {
1033                         fc_fcp_cleanup_cmd(fsp, error);
1034                         fc_io_compl(fsp);
1035                         fc_fcp_unlock_pkt(fsp);
1036                 }
1037
1038                 fc_fcp_pkt_release(fsp);
1039                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1040                 /*
1041                  * while we dropped the lock multiple pkts could
1042                  * have been released, so we have to start over.
1043                  */
1044                 goto restart;
1045         }
1046         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1047 }
1048
1049 /**
1050  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1051  * @lport: The local port whose exchanges are to be aborted
1052  */
1053 static void fc_fcp_abort_io(struct fc_lport *lport)
1054 {
1055         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1056 }
1057
1058 /**
1059  * fc_fcp_pkt_send() - Send a fcp_pkt
1060  * @lport: The local port to send the FCP packet on
1061  * @fsp:   The FCP packet to send
1062  *
1063  * Return:  Zero for success and -1 for failure
1064  * Locks:   Called without locks held
1065  */
1066 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1067 {
1068         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1069         unsigned long flags;
1070         int rc;
1071
1072         fsp->cmd->SCp.ptr = (char *)fsp;
1073         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1074         fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1075
1076         int_to_scsilun(fsp->cmd->device->lun,
1077                        (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1078         memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1079
1080         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1081         list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1082         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1083         rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1084         if (unlikely(rc)) {
1085                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1086                 fsp->cmd->SCp.ptr = NULL;
1087                 list_del(&fsp->list);
1088                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1089         }
1090
1091         return rc;
1092 }
1093
1094 /**
1095  * get_fsp_rec_tov() - Helper function to get REC_TOV
1096  * @fsp: the FCP packet
1097  *
1098  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
1099  */
1100 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
1101 {
1102         struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
1103
1104         return msecs_to_jiffies(rpriv->e_d_tov) + HZ;
1105 }
1106
1107 /**
1108  * fc_fcp_cmd_send() - Send a FCP command
1109  * @lport: The local port to send the command on
1110  * @fsp:   The FCP packet the command is on
1111  * @resp:  The handler for the response
1112  */
1113 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1114                            void (*resp)(struct fc_seq *,
1115                                         struct fc_frame *fp,
1116                                         void *arg))
1117 {
1118         struct fc_frame *fp;
1119         struct fc_seq *seq;
1120         struct fc_rport *rport;
1121         struct fc_rport_libfc_priv *rpriv;
1122         const size_t len = sizeof(fsp->cdb_cmd);
1123         int rc = 0;
1124
1125         if (fc_fcp_lock_pkt(fsp))
1126                 return 0;
1127
1128         fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1129         if (!fp) {
1130                 rc = -1;
1131                 goto unlock;
1132         }
1133
1134         memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1135         fr_fsp(fp) = fsp;
1136         rport = fsp->rport;
1137         fsp->max_payload = rport->maxframe_size;
1138         rpriv = rport->dd_data;
1139
1140         fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1141                        rpriv->local_port->port_id, FC_TYPE_FCP,
1142                        FC_FCTL_REQ, 0);
1143
1144         seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1145                                       fsp, 0);
1146         if (!seq) {
1147                 rc = -1;
1148                 goto unlock;
1149         }
1150         fsp->seq_ptr = seq;
1151         fc_fcp_pkt_hold(fsp);   /* hold for fc_fcp_pkt_destroy */
1152
1153         setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1154         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1155                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1156
1157 unlock:
1158         fc_fcp_unlock_pkt(fsp);
1159         return rc;
1160 }
1161
1162 /**
1163  * fc_fcp_error() - Handler for FCP layer errors
1164  * @fsp: The FCP packet the error is on
1165  * @fp:  The frame that has errored
1166  */
1167 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1168 {
1169         int error = PTR_ERR(fp);
1170
1171         if (fc_fcp_lock_pkt(fsp))
1172                 return;
1173
1174         if (error == -FC_EX_CLOSED) {
1175                 fc_fcp_retry_cmd(fsp);
1176                 goto unlock;
1177         }
1178
1179         /*
1180          * clear abort pending, because the lower layer
1181          * decided to force completion.
1182          */
1183         fsp->state &= ~FC_SRB_ABORT_PENDING;
1184         fsp->status_code = FC_CMD_PLOGO;
1185         fc_fcp_complete_locked(fsp);
1186 unlock:
1187         fc_fcp_unlock_pkt(fsp);
1188 }
1189
1190 /**
1191  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1192  * @fsp:   The FCP packet to abort on
1193  *
1194  * Called to send an abort and then wait for abort completion
1195  */
1196 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1197 {
1198         int rc = FAILED;
1199         unsigned long ticks_left;
1200
1201         if (fc_fcp_send_abort(fsp))
1202                 return FAILED;
1203
1204         init_completion(&fsp->tm_done);
1205         fsp->wait_for_comp = 1;
1206
1207         spin_unlock_bh(&fsp->scsi_pkt_lock);
1208         ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1209                                                         FC_SCSI_TM_TOV);
1210         spin_lock_bh(&fsp->scsi_pkt_lock);
1211         fsp->wait_for_comp = 0;
1212
1213         if (!ticks_left) {
1214                 FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1215         } else if (fsp->state & FC_SRB_ABORTED) {
1216                 FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1217                 rc = SUCCESS;
1218                 fc_fcp_complete_locked(fsp);
1219         }
1220
1221         return rc;
1222 }
1223
1224 /**
1225  * fc_lun_reset_send() - Send LUN reset command
1226  * @data: The FCP packet that identifies the LUN to be reset
1227  */
1228 static void fc_lun_reset_send(unsigned long data)
1229 {
1230         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1231         struct fc_lport *lport = fsp->lp;
1232
1233         if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1234                 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1235                         return;
1236                 if (fc_fcp_lock_pkt(fsp))
1237                         return;
1238                 setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1239                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1240                 fc_fcp_unlock_pkt(fsp);
1241         }
1242 }
1243
1244 /**
1245  * fc_lun_reset() - Send a LUN RESET command to a device
1246  *                  and wait for the reply
1247  * @lport: The local port to sent the command on
1248  * @fsp:   The FCP packet that identifies the LUN to be reset
1249  * @id:    The SCSI command ID
1250  * @lun:   The LUN ID to be reset
1251  */
1252 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1253                         unsigned int id, unsigned int lun)
1254 {
1255         int rc;
1256
1257         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1258         fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1259         int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1260
1261         fsp->wait_for_comp = 1;
1262         init_completion(&fsp->tm_done);
1263
1264         fc_lun_reset_send((unsigned long)fsp);
1265
1266         /*
1267          * wait for completion of reset
1268          * after that make sure all commands are terminated
1269          */
1270         rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1271
1272         spin_lock_bh(&fsp->scsi_pkt_lock);
1273         fsp->state |= FC_SRB_COMPL;
1274         spin_unlock_bh(&fsp->scsi_pkt_lock);
1275
1276         del_timer_sync(&fsp->timer);
1277
1278         spin_lock_bh(&fsp->scsi_pkt_lock);
1279         if (fsp->seq_ptr) {
1280                 lport->tt.exch_done(fsp->seq_ptr);
1281                 fsp->seq_ptr = NULL;
1282         }
1283         fsp->wait_for_comp = 0;
1284         spin_unlock_bh(&fsp->scsi_pkt_lock);
1285
1286         if (!rc) {
1287                 FC_SCSI_DBG(lport, "lun reset failed\n");
1288                 return FAILED;
1289         }
1290
1291         /* cdb_status holds the tmf's rsp code */
1292         if (fsp->cdb_status != FCP_TMF_CMPL)
1293                 return FAILED;
1294
1295         FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1296         fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1297         return SUCCESS;
1298 }
1299
1300 /**
1301  * fc_tm_done() - Task Management response handler
1302  * @seq: The sequence that the response is on
1303  * @fp:  The response frame
1304  * @arg: The FCP packet the response is for
1305  */
1306 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1307 {
1308         struct fc_fcp_pkt *fsp = arg;
1309         struct fc_frame_header *fh;
1310
1311         if (IS_ERR(fp)) {
1312                 /*
1313                  * If there is an error just let it timeout or wait
1314                  * for TMF to be aborted if it timedout.
1315                  *
1316                  * scsi-eh will escalate for when either happens.
1317                  */
1318                 return;
1319         }
1320
1321         if (fc_fcp_lock_pkt(fsp))
1322                 goto out;
1323
1324         /*
1325          * raced with eh timeout handler.
1326          */
1327         if (!fsp->seq_ptr || !fsp->wait_for_comp)
1328                 goto out_unlock;
1329
1330         fh = fc_frame_header_get(fp);
1331         if (fh->fh_type != FC_TYPE_BLS)
1332                 fc_fcp_resp(fsp, fp);
1333         fsp->seq_ptr = NULL;
1334         fsp->lp->tt.exch_done(seq);
1335 out_unlock:
1336         fc_fcp_unlock_pkt(fsp);
1337 out:
1338         fc_frame_free(fp);
1339 }
1340
1341 /**
1342  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1343  * @lport: The local port to be cleaned up
1344  */
1345 static void fc_fcp_cleanup(struct fc_lport *lport)
1346 {
1347         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1348 }
1349
1350 /**
1351  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1352  * @data: The FCP packet that has timed out
1353  *
1354  * If REC is supported then just issue it and return. The REC exchange will
1355  * complete or time out and recovery can continue at that point. Otherwise,
1356  * if the response has been received without all the data it has been
1357  * ER_TIMEOUT since the response was received. If the response has not been
1358  * received we see if data was received recently. If it has been then we
1359  * continue waiting, otherwise, we abort the command.
1360  */
1361 static void fc_fcp_timeout(unsigned long data)
1362 {
1363         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1364         struct fc_rport *rport = fsp->rport;
1365         struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1366
1367         if (fc_fcp_lock_pkt(fsp))
1368                 return;
1369
1370         if (fsp->cdb_cmd.fc_tm_flags)
1371                 goto unlock;
1372
1373         fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1374
1375         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1376                 fc_fcp_rec(fsp);
1377         else if (fsp->state & FC_SRB_RCV_STATUS)
1378                 fc_fcp_complete_locked(fsp);
1379         else
1380                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1381         fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1382 unlock:
1383         fc_fcp_unlock_pkt(fsp);
1384 }
1385
1386 /**
1387  * fc_fcp_rec() - Send a REC ELS request
1388  * @fsp: The FCP packet to send the REC request on
1389  */
1390 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1391 {
1392         struct fc_lport *lport;
1393         struct fc_frame *fp;
1394         struct fc_rport *rport;
1395         struct fc_rport_libfc_priv *rpriv;
1396
1397         lport = fsp->lp;
1398         rport = fsp->rport;
1399         rpriv = rport->dd_data;
1400         if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1401                 fsp->status_code = FC_HRD_ERROR;
1402                 fsp->io_status = 0;
1403                 fc_fcp_complete_locked(fsp);
1404                 return;
1405         }
1406
1407         fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1408         if (!fp)
1409                 goto retry;
1410
1411         fr_seq(fp) = fsp->seq_ptr;
1412         fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1413                        rpriv->local_port->port_id, FC_TYPE_ELS,
1414                        FC_FCTL_REQ, 0);
1415         if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1416                                  fc_fcp_rec_resp, fsp,
1417                                  2 * lport->r_a_tov)) {
1418                 fc_fcp_pkt_hold(fsp);           /* hold while REC outstanding */
1419                 return;
1420         }
1421 retry:
1422         if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1423                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1424         else
1425                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1426 }
1427
1428 /**
1429  * fc_fcp_rec_resp() - Handler for REC ELS responses
1430  * @seq: The sequence the response is on
1431  * @fp:  The response frame
1432  * @arg: The FCP packet the response is on
1433  *
1434  * If the response is a reject then the scsi layer will handle
1435  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1436  * set the timeout and return. If the I/O was completed then complete the
1437  * exchange and tell the SCSI layer.
1438  */
1439 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1440 {
1441         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1442         struct fc_els_rec_acc *recp;
1443         struct fc_els_ls_rjt *rjt;
1444         u32 e_stat;
1445         u8 opcode;
1446         u32 offset;
1447         enum dma_data_direction data_dir;
1448         enum fc_rctl r_ctl;
1449         struct fc_rport_libfc_priv *rpriv;
1450
1451         if (IS_ERR(fp)) {
1452                 fc_fcp_rec_error(fsp, fp);
1453                 return;
1454         }
1455
1456         if (fc_fcp_lock_pkt(fsp))
1457                 goto out;
1458
1459         fsp->recov_retry = 0;
1460         opcode = fc_frame_payload_op(fp);
1461         if (opcode == ELS_LS_RJT) {
1462                 rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1463                 switch (rjt->er_reason) {
1464                 default:
1465                         FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1466                                    "reason %d expl %d\n",
1467                                    fsp->rport->port_id, rjt->er_reason,
1468                                    rjt->er_explan);
1469                         /* fall through */
1470                 case ELS_RJT_UNSUP:
1471                         FC_FCP_DBG(fsp, "device does not support REC\n");
1472                         rpriv = fsp->rport->dd_data;
1473                         /*
1474                          * if we do not spport RECs or got some bogus
1475                          * reason then resetup timer so we check for
1476                          * making progress.
1477                          */
1478                         rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1479                         break;
1480                 case ELS_RJT_LOGIC:
1481                 case ELS_RJT_UNAB:
1482                         /*
1483                          * If no data transfer, the command frame got dropped
1484                          * so we just retry.  If data was transferred, we
1485                          * lost the response but the target has no record,
1486                          * so we abort and retry.
1487                          */
1488                         if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1489                             fsp->xfer_len == 0) {
1490                                 fc_fcp_retry_cmd(fsp);
1491                                 break;
1492                         }
1493                         fc_fcp_recovery(fsp, FC_ERROR);
1494                         break;
1495                 }
1496         } else if (opcode == ELS_LS_ACC) {
1497                 if (fsp->state & FC_SRB_ABORTED)
1498                         goto unlock_out;
1499
1500                 data_dir = fsp->cmd->sc_data_direction;
1501                 recp = fc_frame_payload_get(fp, sizeof(*recp));
1502                 offset = ntohl(recp->reca_fc4value);
1503                 e_stat = ntohl(recp->reca_e_stat);
1504
1505                 if (e_stat & ESB_ST_COMPLETE) {
1506
1507                         /*
1508                          * The exchange is complete.
1509                          *
1510                          * For output, we must've lost the response.
1511                          * For input, all data must've been sent.
1512                          * We lost may have lost the response
1513                          * (and a confirmation was requested) and maybe
1514                          * some data.
1515                          *
1516                          * If all data received, send SRR
1517                          * asking for response.  If partial data received,
1518                          * or gaps, SRR requests data at start of gap.
1519                          * Recovery via SRR relies on in-order-delivery.
1520                          */
1521                         if (data_dir == DMA_TO_DEVICE) {
1522                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1523                         } else if (fsp->xfer_contig_end == offset) {
1524                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1525                         } else {
1526                                 offset = fsp->xfer_contig_end;
1527                                 r_ctl = FC_RCTL_DD_SOL_DATA;
1528                         }
1529                         fc_fcp_srr(fsp, r_ctl, offset);
1530                 } else if (e_stat & ESB_ST_SEQ_INIT) {
1531                         /*
1532                          * The remote port has the initiative, so just
1533                          * keep waiting for it to complete.
1534                          */
1535                         fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1536                 } else {
1537
1538                         /*
1539                          * The exchange is incomplete, we have seq. initiative.
1540                          * Lost response with requested confirmation,
1541                          * lost confirmation, lost transfer ready or
1542                          * lost write data.
1543                          *
1544                          * For output, if not all data was received, ask
1545                          * for transfer ready to be repeated.
1546                          *
1547                          * If we received or sent all the data, send SRR to
1548                          * request response.
1549                          *
1550                          * If we lost a response, we may have lost some read
1551                          * data as well.
1552                          */
1553                         r_ctl = FC_RCTL_DD_SOL_DATA;
1554                         if (data_dir == DMA_TO_DEVICE) {
1555                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1556                                 if (offset < fsp->data_len)
1557                                         r_ctl = FC_RCTL_DD_DATA_DESC;
1558                         } else if (offset == fsp->xfer_contig_end) {
1559                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1560                         } else if (fsp->xfer_contig_end < offset) {
1561                                 offset = fsp->xfer_contig_end;
1562                         }
1563                         fc_fcp_srr(fsp, r_ctl, offset);
1564                 }
1565         }
1566 unlock_out:
1567         fc_fcp_unlock_pkt(fsp);
1568 out:
1569         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1570         fc_frame_free(fp);
1571 }
1572
1573 /**
1574  * fc_fcp_rec_error() - Handler for REC errors
1575  * @fsp: The FCP packet the error is on
1576  * @fp:  The REC frame
1577  */
1578 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1579 {
1580         int error = PTR_ERR(fp);
1581
1582         if (fc_fcp_lock_pkt(fsp))
1583                 goto out;
1584
1585         switch (error) {
1586         case -FC_EX_CLOSED:
1587                 fc_fcp_retry_cmd(fsp);
1588                 break;
1589
1590         default:
1591                 FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1592                            fsp, fsp->rport->port_id, error);
1593                 fsp->status_code = FC_CMD_PLOGO;
1594                 /* fall through */
1595
1596         case -FC_EX_TIMEOUT:
1597                 /*
1598                  * Assume REC or LS_ACC was lost.
1599                  * The exchange manager will have aborted REC, so retry.
1600                  */
1601                 FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1602                            fsp->rport->port_id, error, fsp->recov_retry,
1603                            FC_MAX_RECOV_RETRY);
1604                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1605                         fc_fcp_rec(fsp);
1606                 else
1607                         fc_fcp_recovery(fsp, FC_ERROR);
1608                 break;
1609         }
1610         fc_fcp_unlock_pkt(fsp);
1611 out:
1612         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1613 }
1614
1615 /**
1616  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1617  * @fsp: The FCP pkt that needs to be aborted
1618  */
1619 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1620 {
1621         fsp->status_code = code;
1622         fsp->cdb_status = 0;
1623         fsp->io_status = 0;
1624         /*
1625          * if this fails then we let the scsi command timer fire and
1626          * scsi-ml escalate.
1627          */
1628         fc_fcp_send_abort(fsp);
1629 }
1630
1631 /**
1632  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1633  * @fsp:   The FCP packet the SRR is to be sent on
1634  * @r_ctl: The R_CTL field for the SRR request
1635  * This is called after receiving status but insufficient data, or
1636  * when expecting status but the request has timed out.
1637  */
1638 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1639 {
1640         struct fc_lport *lport = fsp->lp;
1641         struct fc_rport *rport;
1642         struct fc_rport_libfc_priv *rpriv;
1643         struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1644         struct fc_seq *seq;
1645         struct fcp_srr *srr;
1646         struct fc_frame *fp;
1647         unsigned int rec_tov;
1648
1649         rport = fsp->rport;
1650         rpriv = rport->dd_data;
1651
1652         if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1653             rpriv->rp_state != RPORT_ST_READY)
1654                 goto retry;                     /* shouldn't happen */
1655         fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1656         if (!fp)
1657                 goto retry;
1658
1659         srr = fc_frame_payload_get(fp, sizeof(*srr));
1660         memset(srr, 0, sizeof(*srr));
1661         srr->srr_op = ELS_SRR;
1662         srr->srr_ox_id = htons(ep->oxid);
1663         srr->srr_rx_id = htons(ep->rxid);
1664         srr->srr_r_ctl = r_ctl;
1665         srr->srr_rel_off = htonl(offset);
1666
1667         fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1668                        rpriv->local_port->port_id, FC_TYPE_FCP,
1669                        FC_FCTL_REQ, 0);
1670
1671         rec_tov = get_fsp_rec_tov(fsp);
1672         seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp,
1673                                       fc_fcp_pkt_destroy,
1674                                       fsp, jiffies_to_msecs(rec_tov));
1675         if (!seq)
1676                 goto retry;
1677
1678         fsp->recov_seq = seq;
1679         fsp->xfer_len = offset;
1680         fsp->xfer_contig_end = offset;
1681         fsp->state &= ~FC_SRB_RCV_STATUS;
1682         fc_fcp_pkt_hold(fsp);           /* hold for outstanding SRR */
1683         return;
1684 retry:
1685         fc_fcp_retry_cmd(fsp);
1686 }
1687
1688 /**
1689  * fc_fcp_srr_resp() - Handler for SRR response
1690  * @seq: The sequence the SRR is on
1691  * @fp:  The SRR frame
1692  * @arg: The FCP packet the SRR is on
1693  */
1694 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1695 {
1696         struct fc_fcp_pkt *fsp = arg;
1697         struct fc_frame_header *fh;
1698
1699         if (IS_ERR(fp)) {
1700                 fc_fcp_srr_error(fsp, fp);
1701                 return;
1702         }
1703
1704         if (fc_fcp_lock_pkt(fsp))
1705                 goto out;
1706
1707         fh = fc_frame_header_get(fp);
1708         /*
1709          * BUG? fc_fcp_srr_error calls exch_done which would release
1710          * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1711          * then fc_exch_timeout would be sending an abort. The exch_done
1712          * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1713          * an abort response though.
1714          */
1715         if (fh->fh_type == FC_TYPE_BLS) {
1716                 fc_fcp_unlock_pkt(fsp);
1717                 return;
1718         }
1719
1720         switch (fc_frame_payload_op(fp)) {
1721         case ELS_LS_ACC:
1722                 fsp->recov_retry = 0;
1723                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1724                 break;
1725         case ELS_LS_RJT:
1726         default:
1727                 fc_fcp_recovery(fsp, FC_ERROR);
1728                 break;
1729         }
1730         fc_fcp_unlock_pkt(fsp);
1731 out:
1732         fsp->lp->tt.exch_done(seq);
1733         fc_frame_free(fp);
1734 }
1735
1736 /**
1737  * fc_fcp_srr_error() - Handler for SRR errors
1738  * @fsp: The FCP packet that the SRR error is on
1739  * @fp:  The SRR frame
1740  */
1741 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1742 {
1743         if (fc_fcp_lock_pkt(fsp))
1744                 goto out;
1745         switch (PTR_ERR(fp)) {
1746         case -FC_EX_TIMEOUT:
1747                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1748                         fc_fcp_rec(fsp);
1749                 else
1750                         fc_fcp_recovery(fsp, FC_TIMED_OUT);
1751                 break;
1752         case -FC_EX_CLOSED:                     /* e.g., link failure */
1753                 /* fall through */
1754         default:
1755                 fc_fcp_retry_cmd(fsp);
1756                 break;
1757         }
1758         fc_fcp_unlock_pkt(fsp);
1759 out:
1760         fsp->lp->tt.exch_done(fsp->recov_seq);
1761 }
1762
1763 /**
1764  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1765  * @lport: The local port to be checked
1766  */
1767 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1768 {
1769         /* lock ? */
1770         return (lport->state == LPORT_ST_READY) &&
1771                 lport->link_up && !lport->qfull;
1772 }
1773
1774 /**
1775  * fc_queuecommand() - The queuecommand function of the SCSI template
1776  * @shost: The Scsi_Host that the command was issued to
1777  * @cmd:   The scsi_cmnd to be executed
1778  *
1779  * This is the i/o strategy routine, called by the SCSI layer.
1780  */
1781 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1782 {
1783         struct fc_lport *lport = shost_priv(shost);
1784         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1785         struct fc_fcp_pkt *fsp;
1786         struct fc_rport_libfc_priv *rpriv;
1787         int rval;
1788         int rc = 0;
1789         struct fcoe_dev_stats *stats;
1790
1791         rval = fc_remote_port_chkready(rport);
1792         if (rval) {
1793                 sc_cmd->result = rval;
1794                 sc_cmd->scsi_done(sc_cmd);
1795                 return 0;
1796         }
1797
1798         if (!*(struct fc_remote_port **)rport->dd_data) {
1799                 /*
1800                  * rport is transitioning from blocked/deleted to
1801                  * online
1802                  */
1803                 sc_cmd->result = DID_IMM_RETRY << 16;
1804                 sc_cmd->scsi_done(sc_cmd);
1805                 goto out;
1806         }
1807
1808         rpriv = rport->dd_data;
1809
1810         if (!fc_fcp_lport_queue_ready(lport)) {
1811                 if (lport->qfull)
1812                         fc_fcp_can_queue_ramp_down(lport);
1813                 rc = SCSI_MLQUEUE_HOST_BUSY;
1814                 goto out;
1815         }
1816
1817         fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1818         if (fsp == NULL) {
1819                 rc = SCSI_MLQUEUE_HOST_BUSY;
1820                 goto out;
1821         }
1822
1823         /*
1824          * build the libfc request pkt
1825          */
1826         fsp->cmd = sc_cmd;      /* save the cmd */
1827         fsp->rport = rport;     /* set the remote port ptr */
1828
1829         /*
1830          * set up the transfer length
1831          */
1832         fsp->data_len = scsi_bufflen(sc_cmd);
1833         fsp->xfer_len = 0;
1834
1835         /*
1836          * setup the data direction
1837          */
1838         stats = per_cpu_ptr(lport->dev_stats, get_cpu());
1839         if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1840                 fsp->req_flags = FC_SRB_READ;
1841                 stats->InputRequests++;
1842                 stats->InputBytes += fsp->data_len;
1843         } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1844                 fsp->req_flags = FC_SRB_WRITE;
1845                 stats->OutputRequests++;
1846                 stats->OutputBytes += fsp->data_len;
1847         } else {
1848                 fsp->req_flags = 0;
1849                 stats->ControlRequests++;
1850         }
1851         put_cpu();
1852
1853         init_timer(&fsp->timer);
1854         fsp->timer.data = (unsigned long)fsp;
1855
1856         /*
1857          * send it to the lower layer
1858          * if we get -1 return then put the request in the pending
1859          * queue.
1860          */
1861         rval = fc_fcp_pkt_send(lport, fsp);
1862         if (rval != 0) {
1863                 fsp->state = FC_SRB_FREE;
1864                 fc_fcp_pkt_release(fsp);
1865                 rc = SCSI_MLQUEUE_HOST_BUSY;
1866         }
1867 out:
1868         return rc;
1869 }
1870 EXPORT_SYMBOL(fc_queuecommand);
1871
1872 /**
1873  * fc_io_compl() - Handle responses for completed commands
1874  * @fsp: The FCP packet that is complete
1875  *
1876  * Translates fcp_pkt errors to a Linux SCSI errors.
1877  * The fcp packet lock must be held when calling.
1878  */
1879 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1880 {
1881         struct fc_fcp_internal *si;
1882         struct scsi_cmnd *sc_cmd;
1883         struct fc_lport *lport;
1884         unsigned long flags;
1885
1886         /* release outstanding ddp context */
1887         fc_fcp_ddp_done(fsp);
1888
1889         fsp->state |= FC_SRB_COMPL;
1890         if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1891                 spin_unlock_bh(&fsp->scsi_pkt_lock);
1892                 del_timer_sync(&fsp->timer);
1893                 spin_lock_bh(&fsp->scsi_pkt_lock);
1894         }
1895
1896         lport = fsp->lp;
1897         si = fc_get_scsi_internal(lport);
1898
1899         /*
1900          * if can_queue ramp down is done then try can_queue ramp up
1901          * since commands are completing now.
1902          */
1903         if (si->last_can_queue_ramp_down_time)
1904                 fc_fcp_can_queue_ramp_up(lport);
1905
1906         sc_cmd = fsp->cmd;
1907         CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1908         switch (fsp->status_code) {
1909         case FC_COMPLETE:
1910                 if (fsp->cdb_status == 0) {
1911                         /*
1912                          * good I/O status
1913                          */
1914                         sc_cmd->result = DID_OK << 16;
1915                         if (fsp->scsi_resid)
1916                                 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1917                 } else {
1918                         /*
1919                          * transport level I/O was ok but scsi
1920                          * has non zero status
1921                          */
1922                         sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1923                 }
1924                 break;
1925         case FC_ERROR:
1926                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1927                            "due to FC_ERROR\n");
1928                 sc_cmd->result = DID_ERROR << 16;
1929                 break;
1930         case FC_DATA_UNDRUN:
1931                 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1932                         /*
1933                          * scsi status is good but transport level
1934                          * underrun.
1935                          */
1936                         if (fsp->state & FC_SRB_RCV_STATUS) {
1937                                 sc_cmd->result = DID_OK << 16;
1938                         } else {
1939                                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1940                                            " due to FC_DATA_UNDRUN (trans)\n");
1941                                 sc_cmd->result = DID_ERROR << 16;
1942                         }
1943                 } else {
1944                         /*
1945                          * scsi got underrun, this is an error
1946                          */
1947                         FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1948                                    "due to FC_DATA_UNDRUN (scsi)\n");
1949                         CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1950                         sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1951                 }
1952                 break;
1953         case FC_DATA_OVRRUN:
1954                 /*
1955                  * overrun is an error
1956                  */
1957                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1958                            "due to FC_DATA_OVRRUN\n");
1959                 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1960                 break;
1961         case FC_CMD_ABORTED:
1962                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1963                           "due to FC_CMD_ABORTED\n");
1964                 sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1965                 break;
1966         case FC_CMD_RESET:
1967                 FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
1968                            "due to FC_CMD_RESET\n");
1969                 sc_cmd->result = (DID_RESET << 16);
1970                 break;
1971         case FC_HRD_ERROR:
1972                 FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
1973                            "due to FC_HRD_ERROR\n");
1974                 sc_cmd->result = (DID_NO_CONNECT << 16);
1975                 break;
1976         case FC_CRC_ERROR:
1977                 FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
1978                            "due to FC_CRC_ERROR\n");
1979                 sc_cmd->result = (DID_PARITY << 16);
1980                 break;
1981         case FC_TIMED_OUT:
1982                 FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
1983                            "due to FC_TIMED_OUT\n");
1984                 sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1985                 break;
1986         default:
1987                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1988                            "due to unknown error\n");
1989                 sc_cmd->result = (DID_ERROR << 16);
1990                 break;
1991         }
1992
1993         if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
1994                 sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
1995
1996         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1997         list_del(&fsp->list);
1998         sc_cmd->SCp.ptr = NULL;
1999         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2000         sc_cmd->scsi_done(sc_cmd);
2001
2002         /* release ref from initial allocation in queue command */
2003         fc_fcp_pkt_release(fsp);
2004 }
2005
2006 /**
2007  * fc_eh_abort() - Abort a command
2008  * @sc_cmd: The SCSI command to abort
2009  *
2010  * From SCSI host template.
2011  * Send an ABTS to the target device and wait for the response.
2012  */
2013 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2014 {
2015         struct fc_fcp_pkt *fsp;
2016         struct fc_lport *lport;
2017         struct fc_fcp_internal *si;
2018         int rc = FAILED;
2019         unsigned long flags;
2020
2021         lport = shost_priv(sc_cmd->device->host);
2022         if (lport->state != LPORT_ST_READY)
2023                 return rc;
2024         else if (!lport->link_up)
2025                 return rc;
2026
2027         si = fc_get_scsi_internal(lport);
2028         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2029         fsp = CMD_SP(sc_cmd);
2030         if (!fsp) {
2031                 /* command completed while scsi eh was setting up */
2032                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2033                 return SUCCESS;
2034         }
2035         /* grab a ref so the fsp and sc_cmd cannot be relased from under us */
2036         fc_fcp_pkt_hold(fsp);
2037         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2038
2039         if (fc_fcp_lock_pkt(fsp)) {
2040                 /* completed while we were waiting for timer to be deleted */
2041                 rc = SUCCESS;
2042                 goto release_pkt;
2043         }
2044
2045         rc = fc_fcp_pkt_abort(fsp);
2046         fc_fcp_unlock_pkt(fsp);
2047
2048 release_pkt:
2049         fc_fcp_pkt_release(fsp);
2050         return rc;
2051 }
2052 EXPORT_SYMBOL(fc_eh_abort);
2053
2054 /**
2055  * fc_eh_device_reset() - Reset a single LUN
2056  * @sc_cmd: The SCSI command which identifies the device whose
2057  *          LUN is to be reset
2058  *
2059  * Set from SCSI host template.
2060  */
2061 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2062 {
2063         struct fc_lport *lport;
2064         struct fc_fcp_pkt *fsp;
2065         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2066         int rc = FAILED;
2067         int rval;
2068
2069         rval = fc_remote_port_chkready(rport);
2070         if (rval)
2071                 goto out;
2072
2073         lport = shost_priv(sc_cmd->device->host);
2074
2075         if (lport->state != LPORT_ST_READY)
2076                 return rc;
2077
2078         FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2079
2080         fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2081         if (fsp == NULL) {
2082                 printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2083                 goto out;
2084         }
2085
2086         /*
2087          * Build the libfc request pkt. Do not set the scsi cmnd, because
2088          * the sc passed in is not setup for execution like when sent
2089          * through the queuecommand callout.
2090          */
2091         fsp->rport = rport;     /* set the remote port ptr */
2092
2093         /*
2094          * flush outstanding commands
2095          */
2096         rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2097         fsp->state = FC_SRB_FREE;
2098         fc_fcp_pkt_release(fsp);
2099
2100 out:
2101         return rc;
2102 }
2103 EXPORT_SYMBOL(fc_eh_device_reset);
2104
2105 /**
2106  * fc_eh_host_reset() - Reset a Scsi_Host.
2107  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2108  */
2109 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2110 {
2111         struct Scsi_Host *shost = sc_cmd->device->host;
2112         struct fc_lport *lport = shost_priv(shost);
2113         unsigned long wait_tmo;
2114
2115         FC_SCSI_DBG(lport, "Resetting host\n");
2116
2117         lport->tt.lport_reset(lport);
2118         wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2119         while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2120                                                                wait_tmo))
2121                 msleep(1000);
2122
2123         if (fc_fcp_lport_queue_ready(lport)) {
2124                 shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2125                              "on port (%6.6x)\n", lport->port_id);
2126                 return SUCCESS;
2127         } else {
2128                 shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2129                              "port (%6.6x) is not ready.\n",
2130                              lport->port_id);
2131                 return FAILED;
2132         }
2133 }
2134 EXPORT_SYMBOL(fc_eh_host_reset);
2135
2136 /**
2137  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2138  * @sdev: The SCSI device that identifies the SCSI host
2139  *
2140  * Configures queue depth based on host's cmd_per_len. If not set
2141  * then we use the libfc default.
2142  */
2143 int fc_slave_alloc(struct scsi_device *sdev)
2144 {
2145         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2146
2147         if (!rport || fc_remote_port_chkready(rport))
2148                 return -ENXIO;
2149
2150         if (sdev->tagged_supported)
2151                 scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2152         else
2153                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
2154                                         FC_FCP_DFLT_QUEUE_DEPTH);
2155
2156         return 0;
2157 }
2158 EXPORT_SYMBOL(fc_slave_alloc);
2159
2160 /**
2161  * fc_change_queue_depth() - Change a device's queue depth
2162  * @sdev:   The SCSI device whose queue depth is to change
2163  * @qdepth: The new queue depth
2164  * @reason: The resason for the change
2165  */
2166 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2167 {
2168         switch (reason) {
2169         case SCSI_QDEPTH_DEFAULT:
2170                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2171                 break;
2172         case SCSI_QDEPTH_QFULL:
2173                 scsi_track_queue_full(sdev, qdepth);
2174                 break;
2175         case SCSI_QDEPTH_RAMP_UP:
2176                 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2177                 break;
2178         default:
2179                 return -EOPNOTSUPP;
2180         }
2181         return sdev->queue_depth;
2182 }
2183 EXPORT_SYMBOL(fc_change_queue_depth);
2184
2185 /**
2186  * fc_change_queue_type() - Change a device's queue type
2187  * @sdev:     The SCSI device whose queue depth is to change
2188  * @tag_type: Identifier for queue type
2189  */
2190 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2191 {
2192         if (sdev->tagged_supported) {
2193                 scsi_set_tag_type(sdev, tag_type);
2194                 if (tag_type)
2195                         scsi_activate_tcq(sdev, sdev->queue_depth);
2196                 else
2197                         scsi_deactivate_tcq(sdev, sdev->queue_depth);
2198         } else
2199                 tag_type = 0;
2200
2201         return tag_type;
2202 }
2203 EXPORT_SYMBOL(fc_change_queue_type);
2204
2205 /**
2206  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2207  * @lport: The local port that no longer needs the FCP layer
2208  */
2209 void fc_fcp_destroy(struct fc_lport *lport)
2210 {
2211         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2212
2213         if (!list_empty(&si->scsi_pkt_queue))
2214                 printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2215                        "port (%6.6x)\n", lport->port_id);
2216
2217         mempool_destroy(si->scsi_pkt_pool);
2218         kfree(si);
2219         lport->scsi_priv = NULL;
2220 }
2221 EXPORT_SYMBOL(fc_fcp_destroy);
2222
2223 int fc_setup_fcp(void)
2224 {
2225         int rc = 0;
2226
2227         scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2228                                             sizeof(struct fc_fcp_pkt),
2229                                             0, SLAB_HWCACHE_ALIGN, NULL);
2230         if (!scsi_pkt_cachep) {
2231                 printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2232                        "module load failed!");
2233                 rc = -ENOMEM;
2234         }
2235
2236         return rc;
2237 }
2238
2239 void fc_destroy_fcp(void)
2240 {
2241         if (scsi_pkt_cachep)
2242                 kmem_cache_destroy(scsi_pkt_cachep);
2243 }
2244
2245 /**
2246  * fc_fcp_init() - Initialize the FCP layer for a local port
2247  * @lport: The local port to initialize the exchange layer for
2248  */
2249 int fc_fcp_init(struct fc_lport *lport)
2250 {
2251         int rc;
2252         struct fc_fcp_internal *si;
2253
2254         if (!lport->tt.fcp_cmd_send)
2255                 lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2256
2257         if (!lport->tt.fcp_cleanup)
2258                 lport->tt.fcp_cleanup = fc_fcp_cleanup;
2259
2260         if (!lport->tt.fcp_abort_io)
2261                 lport->tt.fcp_abort_io = fc_fcp_abort_io;
2262
2263         si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2264         if (!si)
2265                 return -ENOMEM;
2266         lport->scsi_priv = si;
2267         si->max_can_queue = lport->host->can_queue;
2268         INIT_LIST_HEAD(&si->scsi_pkt_queue);
2269         spin_lock_init(&si->scsi_queue_lock);
2270
2271         si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2272         if (!si->scsi_pkt_pool) {
2273                 rc = -ENOMEM;
2274                 goto free_internal;
2275         }
2276         return 0;
2277
2278 free_internal:
2279         kfree(si);
2280         return rc;
2281 }
2282 EXPORT_SYMBOL(fc_fcp_init);