5 /* we are configuring for 2 SCUs */
6 static const int num_elements = 2;
9 * For all defined arrays:
10 * elements 0-3 are for SCU0, ports 0-3
11 * elements 4-7 are for SCU1, ports 0-3
13 * valid configurations for one SCU are:
16 * 0xF,0x0,0x0,0x0 # 1 x4 port
17 * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
19 * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
21 * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
22 * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
24 * if there is a port/phy on which you do not wish to override the default
25 * values, use the value assigned to UNINIT_PARAM (255).
28 static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
30 #else /* APC (default) */
31 static const __u8 phy_mask[2][4];
34 /* discovery mode type (port auto config mode by default ) */
35 static const int mode_type;
37 /* Maximum number of concurrent device spin up */
38 static const int max_num_concurrent_dev_spin_up = 1;
40 /* enable of ssc operation */
41 static const int enable_ssc;
43 /* AFE_TX_AMP_CONTROL */
44 static const unsigned int afe_tx_amp_control0 = 0x000e7c03;
45 static const unsigned int afe_tx_amp_control1 = 0x000e7c03;
46 static const unsigned int afe_tx_amp_control2 = 0x000e7c03;
47 static const unsigned int afe_tx_amp_control3 = 0x000e7c03;
50 * if there is a port/phy on which you do not wish to override the default
51 * values, use the value "0000000000000000". SAS address of zero's is
52 * considered invalid and will not be used.
54 static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000000ULL,
55 0x5FCFFFFFF1000000ULL,
56 0x5FCFFFFFF2000000ULL,
57 0x5FCFFFFFF3000000ULL },
58 { 0x5FCFFFFFF4000000ULL,
59 0x5FCFFFFFF5000000ULL,
60 0x5FCFFFFFF6000000ULL,
61 0x5FCFFFFFF7000000ULL } };
63 static const char blob_name[] = "isci_firmware.bin";
64 static const char sig[] = "ISCUOEMB";
65 static const unsigned char version = 1;