2 * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
6 * Linux driver for Brocade Fibre Channel Host Bus Adapter.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License (GPL) Version 2 as
10 * published by the Free Software Foundation
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
18 #ifndef __BFA_DEFS_H__
19 #define __BFA_DEFS_H__
24 #define BFA_MFG_SERIALNUM_SIZE 11
25 #define STRSZ(_n) (((_n) + 4) & ~3)
28 * Manufacturing card type
31 BFA_MFG_TYPE_CB_MAX = 825, /* Crossbow card type max */
32 BFA_MFG_TYPE_FC8P2 = 825, /* 8G 2port FC card */
33 BFA_MFG_TYPE_FC8P1 = 815, /* 8G 1port FC card */
34 BFA_MFG_TYPE_FC4P2 = 425, /* 4G 2port FC card */
35 BFA_MFG_TYPE_FC4P1 = 415, /* 4G 1port FC card */
36 BFA_MFG_TYPE_CNA10P2 = 1020, /* 10G 2port CNA card */
37 BFA_MFG_TYPE_CNA10P1 = 1010, /* 10G 1port CNA card */
38 BFA_MFG_TYPE_JAYHAWK = 804, /* Jayhawk mezz card */
39 BFA_MFG_TYPE_WANCHESE = 1007, /* Wanchese mezz card */
40 BFA_MFG_TYPE_ASTRA = 807, /* Astra mezz card */
41 BFA_MFG_TYPE_LIGHTNING_P0 = 902, /* Lightning mezz card - old */
42 BFA_MFG_TYPE_LIGHTNING = 1741, /* Lightning mezz card */
43 BFA_MFG_TYPE_PROWLER_F = 1560, /* Prowler FC only cards */
44 BFA_MFG_TYPE_PROWLER_N = 1410, /* Prowler NIC only cards */
45 BFA_MFG_TYPE_PROWLER_C = 1710, /* Prowler CNA only cards */
46 BFA_MFG_TYPE_PROWLER_D = 1860, /* Prowler Dual cards */
47 BFA_MFG_TYPE_CHINOOK = 1867, /* Chinook cards */
48 BFA_MFG_TYPE_CHINOOK2 = 1869, /*!< Chinook2 cards */
49 BFA_MFG_TYPE_INVALID = 0, /* Invalid card type */
57 #define bfa_mfg_is_mezz(type) (( \
58 (type) == BFA_MFG_TYPE_JAYHAWK || \
59 (type) == BFA_MFG_TYPE_WANCHESE || \
60 (type) == BFA_MFG_TYPE_ASTRA || \
61 (type) == BFA_MFG_TYPE_LIGHTNING_P0 || \
62 (type) == BFA_MFG_TYPE_LIGHTNING || \
63 (type) == BFA_MFG_TYPE_CHINOOK || \
64 (type) == BFA_MFG_TYPE_CHINOOK2))
67 * Check if the card having old wwn/mac handling
69 #define bfa_mfg_is_old_wwn_mac_model(type) (( \
70 (type) == BFA_MFG_TYPE_FC8P2 || \
71 (type) == BFA_MFG_TYPE_FC8P1 || \
72 (type) == BFA_MFG_TYPE_FC4P2 || \
73 (type) == BFA_MFG_TYPE_FC4P1 || \
74 (type) == BFA_MFG_TYPE_CNA10P2 || \
75 (type) == BFA_MFG_TYPE_CNA10P1 || \
76 (type) == BFA_MFG_TYPE_JAYHAWK || \
77 (type) == BFA_MFG_TYPE_WANCHESE))
79 #define bfa_mfg_increment_wwn_mac(m, i) \
81 u32 t = ((u32)(m)[0] << 16) | ((u32)(m)[1] << 8) | \
84 (m)[0] = (t >> 16) & 0xFF; \
85 (m)[1] = (t >> 8) & 0xFF; \
92 #define BFA_MFG_VPD_LEN 512
98 BFA_MFG_VPD_UNKNOWN = 0, /* vendor unknown */
99 BFA_MFG_VPD_IBM = 1, /* vendor IBM */
100 BFA_MFG_VPD_HP = 2, /* vendor HP */
101 BFA_MFG_VPD_DELL = 3, /* vendor DELL */
102 BFA_MFG_VPD_PCI_IBM = 0x08, /* PCI VPD IBM */
103 BFA_MFG_VPD_PCI_HP = 0x10, /* PCI VPD HP */
104 BFA_MFG_VPD_PCI_DELL = 0x20, /* PCI VPD DELL */
105 BFA_MFG_VPD_PCI_BRCD = 0xf8, /* PCI VPD Brocade */
109 * All numerical fields are in big-endian format.
111 struct bfa_mfg_vpd_s {
112 u8 version; /* vpd data version */
113 u8 vpd_sig[3]; /* characters 'V', 'P', 'D' */
114 u8 chksum; /* u8 checksum */
115 u8 vendor; /* vendor */
116 u8 len; /* vpd data length excluding header */
118 u8 data[BFA_MFG_VPD_LEN]; /* vpd data */
124 * Status return values
127 BFA_STATUS_OK = 0, /* Success */
128 BFA_STATUS_FAILED = 1, /* Operation failed */
129 BFA_STATUS_EINVAL = 2, /* Invalid params Check input
131 BFA_STATUS_ENOMEM = 3, /* Out of resources */
132 BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if persists,
134 BFA_STATUS_EPROTOCOL = 6, /* Protocol error */
135 BFA_STATUS_BADFLASH = 9, /* Flash is bad */
136 BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */
137 BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */
138 BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted */
139 BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */
140 BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */
141 BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */
142 BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */
143 BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */
144 BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */
145 BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported limit */
146 BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed setting */
147 BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */
148 BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */
149 BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */
150 BFA_STATUS_UNKNOWN_VWWN = 30, /* VPORT PWWN not found */
151 BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */
152 BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */
153 BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port */
154 BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the rport */
155 BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists
157 BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */
158 BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled */
159 BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational */
160 BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version mismatch */
161 BFA_STATUS_DIAG_BUSY = 71, /* diag busy */
162 BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */
163 BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */
164 BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */
165 BFA_STATUS_ERROR_TRL_ENABLED = 87, /* TRL is enabled */
166 BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */
167 BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */
168 BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */
169 BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */
170 BFA_STATUS_INVALID_MAC = 134, /* Invalid MAC address */
171 BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */
172 BFA_STATUS_PBC = 154, /* Operation not allowed for pre-boot
174 BFA_STATUS_BAD_FWCFG = 156, /* Bad firmware configuration */
175 BFA_STATUS_INVALID_VENDOR = 158, /* Invalid switch vendor */
176 BFA_STATUS_SFP_NOT_READY = 159, /* SFP info is not ready. Retry */
177 BFA_STATUS_TRUNK_ENABLED = 164, /* Trunk is already enabled on
179 BFA_STATUS_TRUNK_DISABLED = 165, /* Trunking is disabled on
181 BFA_STATUS_IOPROFILE_OFF = 175, /* IO profile OFF */
182 BFA_STATUS_PHY_NOT_PRESENT = 183, /* PHY module not present */
183 BFA_STATUS_FEATURE_NOT_SUPPORTED = 192, /* Feature not supported */
184 BFA_STATUS_ENTRY_EXISTS = 193, /* Entry already exists */
185 BFA_STATUS_ENTRY_NOT_EXISTS = 194, /* Entry does not exist */
186 BFA_STATUS_NO_CHANGE = 195, /* Feature already in that state */
187 BFA_STATUS_FAA_ENABLED = 197, /* FAA is already enabled */
188 BFA_STATUS_FAA_DISABLED = 198, /* FAA is already disabled */
189 BFA_STATUS_FAA_ACQUIRED = 199, /* FAA is already acquired */
190 BFA_STATUS_FAA_ACQ_ADDR = 200, /* Acquiring addr */
191 BFA_STATUS_BBCR_FC_ONLY = 201, /*!< BBCredit Recovery is supported for *
193 BFA_STATUS_ERROR_TRUNK_ENABLED = 203, /* Trunk enabled on adapter */
194 BFA_STATUS_MAX_ENTRY_REACHED = 212, /* MAX entry reached */
195 BFA_STATUS_TOPOLOGY_LOOP = 230, /* Topology is set to Loop */
196 BFA_STATUS_LOOP_UNSUPP_MEZZ = 231, /* Loop topology is not supported
198 BFA_STATUS_INVALID_BW = 233, /* Invalid bandwidth value */
199 BFA_STATUS_QOS_BW_INVALID = 234, /* Invalid QOS bandwidth
201 BFA_STATUS_DPORT_ENABLED = 235, /* D-port mode is already enabled */
202 BFA_STATUS_DPORT_DISABLED = 236, /* D-port mode is already disabled */
203 BFA_STATUS_CMD_NOTSUPP_MEZZ = 239, /* Cmd not supported for MEZZ card */
204 BFA_STATUS_FRU_NOT_PRESENT = 240, /* fru module not present */
205 BFA_STATUS_DPORT_NO_SFP = 243, /* SFP is not present.\n D-port will be
206 * enabled but it will be operational
207 * only after inserting a valid SFP. */
208 BFA_STATUS_DPORT_ERR = 245, /* D-port mode is enabled */
209 BFA_STATUS_DPORT_ENOSYS = 254, /* Switch has no D_Port functionality */
210 BFA_STATUS_DPORT_CANT_PERF = 255, /* Switch port is not D_Port capable
211 * or D_Port is disabled */
212 BFA_STATUS_DPORT_LOGICALERR = 256, /* Switch D_Port fail */
213 BFA_STATUS_DPORT_SWBUSY = 257, /* Switch port busy */
214 BFA_STATUS_ERR_BBCR_SPEED_UNSUPPORT = 258, /*!< BB credit recovery is
215 * supported at max port speed alone */
216 BFA_STATUS_ERROR_BBCR_ENABLED = 259, /*!< BB credit recovery
218 BFA_STATUS_INVALID_BBSCN = 260, /*!< Invalid BBSCN value.
219 * Valid range is [1-15] */
220 BFA_STATUS_DDPORT_ERR = 261, /* Dynamic D_Port mode is active.\n To
221 * exit dynamic mode, disable D_Port on
223 BFA_STATUS_DPORT_SFPWRAP_ERR = 262, /* Clear e/o_wrap fail, check or
225 BFA_STATUS_BBCR_CFG_NO_CHANGE = 265, /*!< BBCR is operational.
226 * Disable BBCR and try this operation again. */
227 BFA_STATUS_DPORT_SW_NOTREADY = 268, /* Remote port is not ready to
228 * start dport test. Check remote
230 BFA_STATUS_DPORT_INV_SFP = 271, /* Invalid SFP for D-PORT mode. */
231 BFA_STATUS_DPORT_CMD_NOTSUPP = 273, /* Dport is not supported by
233 BFA_STATUS_MAX_VAL /* Unknown error code */
235 #define bfa_status_t enum bfa_status
237 enum bfa_eproto_status {
238 BFA_EPROTO_BAD_ACCEPT = 0,
239 BFA_EPROTO_UNKNOWN_RSP = 1
241 #define bfa_eproto_status_t enum bfa_eproto_status
247 #define bfa_boolean_t enum bfa_boolean
249 #define BFA_STRING_32 32
250 #define BFA_VERSION_LEN 64
253 * ---------------------- adapter definitions ------------
257 * BFA adapter level attributes.
260 BFA_ADAPTER_SERIAL_NUM_LEN = STRSZ(BFA_MFG_SERIALNUM_SIZE),
262 *!< adapter serial num length
264 BFA_ADAPTER_MODEL_NAME_LEN = 16, /* model name length */
265 BFA_ADAPTER_MODEL_DESCR_LEN = 128, /* model description length */
266 BFA_ADAPTER_MFG_NAME_LEN = 8, /* manufacturer name length */
267 BFA_ADAPTER_SYM_NAME_LEN = 64, /* adapter symbolic name length */
268 BFA_ADAPTER_OS_TYPE_LEN = 64, /* adapter os type length */
269 BFA_ADAPTER_UUID_LEN = 16, /* adapter uuid length */
272 struct bfa_adapter_attr_s {
273 char manufacturer[BFA_ADAPTER_MFG_NAME_LEN];
274 char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
276 char model[BFA_ADAPTER_MODEL_NAME_LEN];
277 char model_descr[BFA_ADAPTER_MODEL_DESCR_LEN];
279 char node_symname[FC_SYMNAME_MAX];
280 char hw_ver[BFA_VERSION_LEN];
281 char fw_ver[BFA_VERSION_LEN];
282 char optrom_ver[BFA_VERSION_LEN];
283 char os_type[BFA_ADAPTER_OS_TYPE_LEN];
284 struct bfa_mfg_vpd_s vpd;
299 u8 mfg_day; /* manufacturing day */
300 u8 mfg_month; /* manufacturing month */
301 u16 mfg_year; /* manufacturing year */
303 u8 uuid[BFA_ADAPTER_UUID_LEN];
307 * ---------------------- IOC definitions ------------
311 BFA_IOC_DRIVER_LEN = 16,
312 BFA_IOC_CHIP_REV_LEN = 8,
316 * Driver and firmware versions.
318 struct bfa_ioc_driver_attr_s {
319 char driver[BFA_IOC_DRIVER_LEN]; /* driver name */
320 char driver_ver[BFA_VERSION_LEN]; /* driver version */
321 char fw_ver[BFA_VERSION_LEN]; /* firmware version */
322 char bios_ver[BFA_VERSION_LEN]; /* bios version */
323 char efi_ver[BFA_VERSION_LEN]; /* EFI version */
324 char ob_ver[BFA_VERSION_LEN]; /* openboot version */
328 * IOC PCI device attributes
330 struct bfa_ioc_pci_attr_s {
331 u16 vendor_id; /* PCI vendor ID */
332 u16 device_id; /* PCI device ID */
333 u16 ssid; /* subsystem ID */
334 u16 ssvid; /* subsystem vendor ID */
335 u32 pcifn; /* PCI device function */
336 u32 rsvd; /* padding */
337 char chip_rev[BFA_IOC_CHIP_REV_LEN]; /* chip revision */
344 BFA_IOC_UNINIT = 1, /* IOC is in uninit state */
345 BFA_IOC_RESET = 2, /* IOC is in reset state */
346 BFA_IOC_SEMWAIT = 3, /* Waiting for IOC h/w semaphore */
347 BFA_IOC_HWINIT = 4, /* IOC h/w is being initialized */
348 BFA_IOC_GETATTR = 5, /* IOC is being configured */
349 BFA_IOC_OPERATIONAL = 6, /* IOC is operational */
350 BFA_IOC_INITFAIL = 7, /* IOC hardware failure */
351 BFA_IOC_FAIL = 8, /* IOC heart-beat failure */
352 BFA_IOC_DISABLING = 9, /* IOC is being disabled */
353 BFA_IOC_DISABLED = 10, /* IOC is disabled */
354 BFA_IOC_FWMISMATCH = 11, /* IOC f/w different from drivers */
355 BFA_IOC_ENABLING = 12, /* IOC is being enabled */
356 BFA_IOC_HWFAIL = 13, /* PCI mapping doesn't exist */
357 BFA_IOC_ACQ_ADDR = 14, /* Acquiring addr from fabric */
363 struct bfa_fw_ioc_stats_s {
375 struct bfa_ioc_drv_stats_s {
393 struct bfa_ioc_stats_s {
394 struct bfa_ioc_drv_stats_s drv_stats; /* driver IOC stats */
395 struct bfa_fw_ioc_stats_s fw_stats; /* firmware IOC stats */
398 enum bfa_ioc_type_e {
400 BFA_IOC_TYPE_FCoE = 2,
405 * IOC attributes returned in queries
407 struct bfa_ioc_attr_s {
408 enum bfa_ioc_type_e ioc_type;
409 enum bfa_ioc_state state; /* IOC state */
410 struct bfa_adapter_attr_s adapter_attr; /* HBA attributes */
411 struct bfa_ioc_driver_attr_s driver_attr; /* driver attr */
412 struct bfa_ioc_pci_attr_s pci_attr;
413 u8 port_id; /* port number */
414 u8 port_mode; /* bfa_mode_s */
415 u8 cap_bm; /* capability */
416 u8 port_mode_cfg; /* bfa_mode_s */
417 u8 def_fn; /* 1 if default fn */
418 u8 rsvd[3]; /* 64bit align */
422 * AEN related definitions
424 enum bfa_aen_category {
425 BFA_AEN_CAT_ADAPTER = 1,
426 BFA_AEN_CAT_PORT = 2,
427 BFA_AEN_CAT_LPORT = 3,
428 BFA_AEN_CAT_RPORT = 4,
429 BFA_AEN_CAT_ITNIM = 5,
430 BFA_AEN_CAT_AUDIT = 8,
434 /* BFA adapter level events */
435 enum bfa_adapter_aen_event {
436 BFA_ADAPTER_AEN_ADD = 1, /* New Adapter found event */
437 BFA_ADAPTER_AEN_REMOVE = 2, /* Adapter removed event */
440 struct bfa_adapter_aen_data_s {
441 char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
442 u32 nports; /* Number of NPorts */
443 wwn_t pwwn; /* WWN of one of its physical port */
446 /* BFA physical port Level events */
447 enum bfa_port_aen_event {
448 BFA_PORT_AEN_ONLINE = 1, /* Physical Port online event */
449 BFA_PORT_AEN_OFFLINE = 2, /* Physical Port offline event */
450 BFA_PORT_AEN_RLIR = 3, /* RLIR event, not supported */
451 BFA_PORT_AEN_SFP_INSERT = 4, /* SFP inserted event */
452 BFA_PORT_AEN_SFP_REMOVE = 5, /* SFP removed event */
453 BFA_PORT_AEN_SFP_POM = 6, /* SFP POM event */
454 BFA_PORT_AEN_ENABLE = 7, /* Physical Port enable event */
455 BFA_PORT_AEN_DISABLE = 8, /* Physical Port disable event */
456 BFA_PORT_AEN_AUTH_ON = 9, /* Physical Port auth success event */
457 BFA_PORT_AEN_AUTH_OFF = 10, /* Physical Port auth fail event */
458 BFA_PORT_AEN_DISCONNECT = 11, /* Physical Port disconnect event */
459 BFA_PORT_AEN_QOS_NEG = 12, /* Base Port QOS negotiation event */
460 BFA_PORT_AEN_FABRIC_NAME_CHANGE = 13, /* Fabric Name/WWN change */
461 BFA_PORT_AEN_SFP_ACCESS_ERROR = 14, /* SFP read error event */
462 BFA_PORT_AEN_SFP_UNSUPPORT = 15, /* Unsupported SFP event */
465 enum bfa_port_aen_sfp_pom {
466 BFA_PORT_AEN_SFP_POM_GREEN = 1, /* Normal */
467 BFA_PORT_AEN_SFP_POM_AMBER = 2, /* Warning */
468 BFA_PORT_AEN_SFP_POM_RED = 3, /* Critical */
469 BFA_PORT_AEN_SFP_POM_MAX = BFA_PORT_AEN_SFP_POM_RED
472 struct bfa_port_aen_data_s {
473 wwn_t pwwn; /* WWN of the physical port */
474 wwn_t fwwn; /* WWN of the fabric port */
475 u32 phy_port_num; /* For SFP related events */
477 u16 level; /* Only transitions will be informed */
478 mac_t mac; /* MAC address of the ethernet port */
482 /* BFA AEN logical port events */
483 enum bfa_lport_aen_event {
484 BFA_LPORT_AEN_NEW = 1, /* LPort created event */
485 BFA_LPORT_AEN_DELETE = 2, /* LPort deleted event */
486 BFA_LPORT_AEN_ONLINE = 3, /* LPort online event */
487 BFA_LPORT_AEN_OFFLINE = 4, /* LPort offline event */
488 BFA_LPORT_AEN_DISCONNECT = 5, /* LPort disconnect event */
489 BFA_LPORT_AEN_NEW_PROP = 6, /* VPort created event */
490 BFA_LPORT_AEN_DELETE_PROP = 7, /* VPort deleted event */
491 BFA_LPORT_AEN_NEW_STANDARD = 8, /* VPort created event */
492 BFA_LPORT_AEN_DELETE_STANDARD = 9, /* VPort deleted event */
493 BFA_LPORT_AEN_NPIV_DUP_WWN = 10, /* VPort with duplicate WWN */
494 BFA_LPORT_AEN_NPIV_FABRIC_MAX = 11, /* Max NPIV in fabric/fport */
495 BFA_LPORT_AEN_NPIV_UNKNOWN = 12, /* Unknown NPIV Error code */
498 struct bfa_lport_aen_data_s {
499 u16 vf_id; /* vf_id of this logical port */
500 u16 roles; /* Logical port mode,IM/TM/IP etc */
502 wwn_t ppwwn; /* WWN of its physical port */
503 wwn_t lpwwn; /* WWN of this logical port */
506 /* BFA ITNIM events */
507 enum bfa_itnim_aen_event {
508 BFA_ITNIM_AEN_ONLINE = 1, /* Target online */
509 BFA_ITNIM_AEN_OFFLINE = 2, /* Target offline */
510 BFA_ITNIM_AEN_DISCONNECT = 3, /* Target disconnected */
513 struct bfa_itnim_aen_data_s {
514 u16 vf_id; /* vf_id of the IT nexus */
516 wwn_t ppwwn; /* WWN of its physical port */
517 wwn_t lpwwn; /* WWN of logical port */
518 wwn_t rpwwn; /* WWN of remote(target) port */
521 /* BFA audit events */
522 enum bfa_audit_aen_event {
523 BFA_AUDIT_AEN_AUTH_ENABLE = 1,
524 BFA_AUDIT_AEN_AUTH_DISABLE = 2,
525 BFA_AUDIT_AEN_FLASH_ERASE = 3,
526 BFA_AUDIT_AEN_FLASH_UPDATE = 4,
529 struct bfa_audit_aen_data_s {
535 /* BFA IOC level events */
536 enum bfa_ioc_aen_event {
537 BFA_IOC_AEN_HBGOOD = 1, /* Heart Beat restore event */
538 BFA_IOC_AEN_HBFAIL = 2, /* Heart Beat failure event */
539 BFA_IOC_AEN_ENABLE = 3, /* IOC enabled event */
540 BFA_IOC_AEN_DISABLE = 4, /* IOC disabled event */
541 BFA_IOC_AEN_FWMISMATCH = 5, /* IOC firmware mismatch */
542 BFA_IOC_AEN_FWCFG_ERROR = 6, /* IOC firmware config error */
543 BFA_IOC_AEN_INVALID_VENDOR = 7,
544 BFA_IOC_AEN_INVALID_NWWN = 8, /* Zero NWWN */
545 BFA_IOC_AEN_INVALID_PWWN = 9 /* Zero PWWN */
548 struct bfa_ioc_aen_data_s {
555 * ---------------------- mfg definitions ------------
561 #define BFA_MFG_CHKSUM_SIZE 16
563 #define BFA_MFG_PARTNUM_SIZE 14
564 #define BFA_MFG_SUPPLIER_ID_SIZE 10
565 #define BFA_MFG_SUPPLIER_PARTNUM_SIZE 20
566 #define BFA_MFG_SUPPLIER_SERIALNUM_SIZE 20
567 #define BFA_MFG_SUPPLIER_REVISION_SIZE 4
569 * Initial capability definition
571 #define BFA_MFG_IC_FC 0x01
572 #define BFA_MFG_IC_ETH 0x02
575 * Adapter capability mask definition
577 #define BFA_CM_HBA 0x01
578 #define BFA_CM_CNA 0x02
579 #define BFA_CM_NIC 0x04
580 #define BFA_CM_FC16G 0x08
581 #define BFA_CM_SRIOV 0x10
582 #define BFA_CM_MEZZ 0x20
587 * All numerical fields are in big-endian format.
589 struct bfa_mfg_block_s {
590 u8 version; /*!< manufacturing block version */
591 u8 mfg_sig[3]; /*!< characters 'M', 'F', 'G' */
592 u16 mfgsize; /*!< mfg block size */
593 u16 u16_chksum; /*!< old u16 checksum */
594 char brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)];
595 char brcd_partnum[STRSZ(BFA_MFG_PARTNUM_SIZE)];
596 u8 mfg_day; /*!< manufacturing day */
597 u8 mfg_month; /*!< manufacturing month */
598 u16 mfg_year; /*!< manufacturing year */
599 wwn_t mfg_wwn; /*!< wwn base for this adapter */
600 u8 num_wwn; /*!< number of wwns assigned */
601 u8 mfg_speeds; /*!< speeds allowed for this adapter */
603 char supplier_id[STRSZ(BFA_MFG_SUPPLIER_ID_SIZE)];
604 char supplier_partnum[STRSZ(BFA_MFG_SUPPLIER_PARTNUM_SIZE)];
605 char supplier_serialnum[STRSZ(BFA_MFG_SUPPLIER_SERIALNUM_SIZE)];
606 char supplier_revision[STRSZ(BFA_MFG_SUPPLIER_REVISION_SIZE)];
607 mac_t mfg_mac; /*!< base mac address */
608 u8 num_mac; /*!< number of mac addresses */
610 u32 card_type; /*!< card type */
611 char cap_nic; /*!< capability nic */
612 char cap_cna; /*!< capability cna */
613 char cap_hba; /*!< capability hba */
614 char cap_fc16g; /*!< capability fc 16g */
615 char cap_sriov; /*!< capability sriov */
616 char cap_mezz; /*!< capability mezz */
618 u8 mfg_nports; /*!< number of ports */
619 char media[8]; /*!< xfi/xaui */
620 char initial_mode[8]; /*!< initial mode: hba/cna/nic */
622 u8 md5_chksum[BFA_MFG_CHKSUM_SIZE]; /*!< md5 checksum */
628 * ---------------------- pci definitions ------------
632 * PCI device and vendor ID information
635 BFA_PCI_VENDOR_ID_BROCADE = 0x1657,
636 BFA_PCI_DEVICE_ID_FC_8G2P = 0x13,
637 BFA_PCI_DEVICE_ID_FC_8G1P = 0x17,
638 BFA_PCI_DEVICE_ID_CT = 0x14,
639 BFA_PCI_DEVICE_ID_CT_FC = 0x21,
640 BFA_PCI_DEVICE_ID_CT2 = 0x22,
641 BFA_PCI_DEVICE_ID_CT2_QUAD = 0x23,
644 #define bfa_asic_id_cb(__d) \
645 ((__d) == BFA_PCI_DEVICE_ID_FC_8G2P || \
646 (__d) == BFA_PCI_DEVICE_ID_FC_8G1P)
647 #define bfa_asic_id_ct(__d) \
648 ((__d) == BFA_PCI_DEVICE_ID_CT || \
649 (__d) == BFA_PCI_DEVICE_ID_CT_FC)
650 #define bfa_asic_id_ct2(__d) \
651 ((__d) == BFA_PCI_DEVICE_ID_CT2 || \
652 (__d) == BFA_PCI_DEVICE_ID_CT2_QUAD)
653 #define bfa_asic_id_ctc(__d) \
654 (bfa_asic_id_ct(__d) || bfa_asic_id_ct2(__d))
657 * PCI sub-system device and vendor ID information
660 BFA_PCI_FCOE_SSDEVICE_ID = 0x14,
661 BFA_PCI_CT2_SSID_FCoE = 0x22,
662 BFA_PCI_CT2_SSID_ETH = 0x23,
663 BFA_PCI_CT2_SSID_FC = 0x24,
667 * Maximum number of device address ranges mapped through different BAR(s)
669 #define BFA_PCI_ACCESS_RANGES 1
672 * Port speed settings. Each specific speed is a bit field. Use multiple
673 * bits to specify speeds to be selected for auto-negotiation.
675 enum bfa_port_speed {
676 BFA_PORT_SPEED_UNKNOWN = 0,
677 BFA_PORT_SPEED_1GBPS = 1,
678 BFA_PORT_SPEED_2GBPS = 2,
679 BFA_PORT_SPEED_4GBPS = 4,
680 BFA_PORT_SPEED_8GBPS = 8,
681 BFA_PORT_SPEED_10GBPS = 10,
682 BFA_PORT_SPEED_16GBPS = 16,
683 BFA_PORT_SPEED_AUTO = 0xf,
685 #define bfa_port_speed_t enum bfa_port_speed
688 BFA_BOOT_BOOTLUN_MAX = 4, /* maximum boot lun per IOC */
689 BFA_PREBOOT_BOOTLUN_MAX = 8, /* maximum preboot lun per IOC */
692 #define BOOT_CFG_REV1 1
693 #define BOOT_CFG_VLAN 1
696 * Boot options setting. Boot options setting determines from where
697 * to get the boot lun information
699 enum bfa_boot_bootopt {
700 BFA_BOOT_AUTO_DISCOVER = 0, /* Boot from blun provided by fabric */
701 BFA_BOOT_STORED_BLUN = 1, /* Boot from bluns stored in flash */
702 BFA_BOOT_FIRST_LUN = 2, /* Boot from first discovered blun */
703 BFA_BOOT_PBC = 3, /* Boot from pbc configured blun */
708 * Boot lun information.
710 struct bfa_boot_bootlun_s {
711 wwn_t pwwn; /* port wwn of target */
712 struct scsi_lun lun; /* 64-bit lun */
717 * BOOT boot configuraton
719 struct bfa_boot_cfg_s {
723 u8 enable; /* enable/disable SAN boot */
724 u8 speed; /* boot speed settings */
725 u8 topology; /* boot topology setting */
726 u8 bootopt; /* bfa_boot_bootopt_t */
727 u32 nbluns; /* number of boot luns */
729 struct bfa_boot_bootlun_s blun[BFA_BOOT_BOOTLUN_MAX];
730 struct bfa_boot_bootlun_s blun_disc[BFA_BOOT_BOOTLUN_MAX];
733 struct bfa_boot_pbc_s {
734 u8 enable; /* enable/disable SAN boot */
735 u8 speed; /* boot speed settings */
736 u8 topology; /* boot topology setting */
738 u32 nbluns; /* number of boot luns */
739 struct bfa_boot_bootlun_s pblun[BFA_PREBOOT_BOOTLUN_MAX];
742 struct bfa_ethboot_cfg_s {
746 u8 enable; /* enable/disable Eth/PXE boot */
752 * ASIC block configuration related structures
754 #define BFA_ABLK_MAX_PORTS 2
755 #define BFA_ABLK_MAX_PFS 16
756 #define BFA_ABLK_MAX 2
765 struct bfa_adapter_cfg_mode_s {
768 enum bfa_mode_s mode;
771 struct bfa_ablk_cfg_pf_s {
785 struct bfa_ablk_cfg_port_s {
792 struct bfa_ablk_cfg_inst_s {
796 struct bfa_ablk_cfg_pf_s pf_cfg[BFA_ABLK_MAX_PFS];
797 struct bfa_ablk_cfg_port_s port_cfg[BFA_ABLK_MAX_PORTS];
800 struct bfa_ablk_cfg_s {
801 struct bfa_ablk_cfg_inst_s inst[BFA_ABLK_MAX];
806 * SFP module specific
808 #define SFP_DIAGMON_SIZE 10 /* num bytes of diag monitor data */
810 /* SFP state change notification event */
811 #define BFA_SFP_SCN_REMOVED 0
812 #define BFA_SFP_SCN_INSERTED 1
813 #define BFA_SFP_SCN_POM 2
814 #define BFA_SFP_SCN_FAILED 3
815 #define BFA_SFP_SCN_UNSUPPORT 4
816 #define BFA_SFP_SCN_VALID 5
818 enum bfa_defs_sfp_media_e {
819 BFA_SFP_MEDIA_UNKNOWN = 0x00,
820 BFA_SFP_MEDIA_CU = 0x01,
821 BFA_SFP_MEDIA_LW = 0x02,
822 BFA_SFP_MEDIA_SW = 0x03,
823 BFA_SFP_MEDIA_EL = 0x04,
824 BFA_SFP_MEDIA_UNSUPPORT = 0x05,
828 * values for xmtr_tech above
831 SFP_XMTR_TECH_CU = (1 << 0), /* copper FC-BaseT */
832 SFP_XMTR_TECH_CP = (1 << 1), /* copper passive */
833 SFP_XMTR_TECH_CA = (1 << 2), /* copper active */
834 SFP_XMTR_TECH_LL = (1 << 3), /* longwave laser */
835 SFP_XMTR_TECH_SL = (1 << 4), /* shortwave laser w/ OFC */
836 SFP_XMTR_TECH_SN = (1 << 5), /* shortwave laser w/o OFC */
837 SFP_XMTR_TECH_EL_INTRA = (1 << 6), /* elec intra-enclosure */
838 SFP_XMTR_TECH_EL_INTER = (1 << 7), /* elec inter-enclosure */
839 SFP_XMTR_TECH_LC = (1 << 8), /* longwave laser */
840 SFP_XMTR_TECH_SA = (1 << 9)
844 * Serial ID: Data Fields -- Address A0h
845 * Basic ID field total 64 bytes
847 struct sfp_srlid_base_s {
848 u8 id; /* 00: Identifier */
849 u8 extid; /* 01: Extended Identifier */
850 u8 connector; /* 02: Connector */
851 u8 xcvr[8]; /* 03-10: Transceiver */
852 u8 encoding; /* 11: Encoding */
853 u8 br_norm; /* 12: BR, Nominal */
854 u8 rate_id; /* 13: Rate Identifier */
855 u8 len_km; /* 14: Length single mode km */
856 u8 len_100m; /* 15: Length single mode 100m */
857 u8 len_om2; /* 16: Length om2 fiber 10m */
858 u8 len_om1; /* 17: Length om1 fiber 10m */
859 u8 len_cu; /* 18: Length copper 1m */
860 u8 len_om3; /* 19: Length om3 fiber 10m */
861 u8 vendor_name[16];/* 20-35 */
863 u8 vendor_oui[3]; /* 37-39 */
864 u8 vendor_pn[16]; /* 40-55 */
865 u8 vendor_rev[4]; /* 56-59 */
866 u8 wavelen[2]; /* 60-61 */
868 u8 cc_base; /* 63: check code for base id field */
872 * Serial ID: Data Fields -- Address A0h
873 * Extended id field total 32 bytes
875 struct sfp_srlid_ext_s {
881 u8 diag_mon_type; /* 92: Diagnostic Monitoring type */
888 * Diagnostic: Data Fields -- Address A2h
889 * Diagnostic and control/status base field total 96 bytes
891 struct sfp_diag_base_s {
893 * Alarm and warning Thresholds 40 bytes
895 u8 temp_high_alarm[2]; /* 00-01 */
896 u8 temp_low_alarm[2]; /* 02-03 */
897 u8 temp_high_warning[2]; /* 04-05 */
898 u8 temp_low_warning[2]; /* 06-07 */
900 u8 volt_high_alarm[2]; /* 08-09 */
901 u8 volt_low_alarm[2]; /* 10-11 */
902 u8 volt_high_warning[2]; /* 12-13 */
903 u8 volt_low_warning[2]; /* 14-15 */
905 u8 bias_high_alarm[2]; /* 16-17 */
906 u8 bias_low_alarm[2]; /* 18-19 */
907 u8 bias_high_warning[2]; /* 20-21 */
908 u8 bias_low_warning[2]; /* 22-23 */
910 u8 tx_pwr_high_alarm[2]; /* 24-25 */
911 u8 tx_pwr_low_alarm[2]; /* 26-27 */
912 u8 tx_pwr_high_warning[2]; /* 28-29 */
913 u8 tx_pwr_low_warning[2]; /* 30-31 */
915 u8 rx_pwr_high_alarm[2]; /* 32-33 */
916 u8 rx_pwr_low_alarm[2]; /* 34-35 */
917 u8 rx_pwr_high_warning[2]; /* 36-37 */
918 u8 rx_pwr_low_warning[2]; /* 38-39 */
935 * Diagnostic: Data Fields -- Address A2h
936 * Diagnostic and control/status extended field total 24 bytes
938 struct sfp_diag_ext_s {
939 u8 diag[SFP_DIAGMON_SIZE];
946 u8 ext_status_ctl[2];
950 * Diagnostic: Data Fields -- Address A2h
951 * General Use Fields: User Writable Table - Features's Control Registers
954 struct sfp_usr_eeprom_s {
955 u8 rsvd1[2]; /* 128-129 */
960 u8 prbs; /* 136: PRBS 7 generator */
962 u8 tx_eqz_16; /* 139: TX Equalizer (16xFC) */
963 u8 tx_eqz_8; /* 140: TX Equalizer (8xFC) */
965 u8 rx_emp_16; /* 143: RX Emphasis (16xFC) */
966 u8 rx_emp_8; /* 144: RX Emphasis (8xFC) */
968 u8 tx_eye_adj; /* 147: TX eye Threshold Adjust */
970 u8 tx_eye_qctl; /* 151: TX eye Quality Control */
971 u8 tx_eye_qres; /* 152: TX eye Quality Result */
973 u8 poh[3]; /* 155-157: Power On Hours */
978 struct sfp_srlid_base_s srlid_base;
979 struct sfp_srlid_ext_s srlid_ext;
980 struct sfp_diag_base_s diag_base;
981 struct sfp_diag_ext_s diag_ext;
982 struct sfp_usr_eeprom_s usr_eeprom;
986 * transceiver codes (SFF-8472 Rev 10.2 Table 3.5)
988 union sfp_xcvr_e10g_code_u {
992 u8 e10g_unall:1; /* 10G Ethernet compliance */
996 u8 ib_sx:1; /* Infiniband compliance */
1004 u8 ib_sx:1; /* Infiniband compliance */
1008 u8 e10g_unall:1; /* 10G Ethernet compliance */
1013 union sfp_xcvr_so1_code_u {
1016 u8 escon:2; /* ESCON compliance code */
1017 u8 oc192_reach:1; /* SONET compliance code */
1023 union sfp_xcvr_so2_code_u {
1027 u8 oc12_reach:3; /* OC12 reach */
1029 u8 oc3_reach:3; /* OC3 reach */
1033 union sfp_xcvr_eth_code_u {
1047 struct sfp_xcvr_fc1_code_s {
1048 u8 link_len:5; /* FC link length */
1050 u8 xmtr_tech1:7; /* FC transmitter technology */
1054 union sfp_xcvr_fc2_code_u {
1057 u8 tw_media:1; /* twin axial pair (tw) */
1058 u8 tp_media:1; /* shielded twisted pair (sp) */
1059 u8 mi_media:1; /* miniature coax (mi) */
1060 u8 tv_media:1; /* video coax (tv) */
1061 u8 m6_media:1; /* multimode, 62.5m (m6) */
1062 u8 m5_media:1; /* multimode, 50m (m5) */
1064 u8 sm_media:1; /* single mode (sm) */
1068 union sfp_xcvr_fc3_code_u {
1073 u8 mb800:1; /* 800 Mbytes/sec */
1074 u8 mb1600:1; /* 1600 Mbytes/sec */
1075 u8 mb400:1; /* 400 Mbytes/sec */
1077 u8 mb200:1; /* 200 Mbytes/sec */
1079 u8 mb100:1; /* 100 Mbytes/sec */
1081 u8 mb100:1; /* 100 Mbytes/sec */
1083 u8 mb200:1; /* 200 Mbytes/sec */
1085 u8 mb400:1; /* 400 Mbytes/sec */
1086 u8 mb1600:1; /* 1600 Mbytes/sec */
1087 u8 mb800:1; /* 800 Mbytes/sec */
1094 union sfp_xcvr_e10g_code_u e10g;
1095 union sfp_xcvr_so1_code_u so1;
1096 union sfp_xcvr_so2_code_u so2;
1097 union sfp_xcvr_eth_code_u eth;
1098 struct sfp_xcvr_fc1_code_s fc1;
1099 union sfp_xcvr_fc2_code_u fc2;
1100 union sfp_xcvr_fc3_code_u fc3;
1104 * Flash module specific
1106 #define BFA_FLASH_PART_ENTRY_SIZE 32 /* partition entry size */
1107 #define BFA_FLASH_PART_MAX 32 /* maximal # of partitions */
1109 enum bfa_flash_part_type {
1110 BFA_FLASH_PART_OPTROM = 1, /* option rom partition */
1111 BFA_FLASH_PART_FWIMG = 2, /* firmware image partition */
1112 BFA_FLASH_PART_FWCFG = 3, /* firmware tuneable config */
1113 BFA_FLASH_PART_DRV = 4, /* IOC driver config */
1114 BFA_FLASH_PART_BOOT = 5, /* boot config */
1115 BFA_FLASH_PART_ASIC = 6, /* asic bootstrap configuration */
1116 BFA_FLASH_PART_MFG = 7, /* manufacturing block partition */
1117 BFA_FLASH_PART_OPTROM2 = 8, /* 2nd option rom partition */
1118 BFA_FLASH_PART_VPD = 9, /* vpd data of OEM info */
1119 BFA_FLASH_PART_PBC = 10, /* pre-boot config */
1120 BFA_FLASH_PART_BOOTOVL = 11, /* boot overlay partition */
1121 BFA_FLASH_PART_LOG = 12, /* firmware log partition */
1122 BFA_FLASH_PART_PXECFG = 13, /* pxe boot config partition */
1123 BFA_FLASH_PART_PXEOVL = 14, /* pxe boot overlay partition */
1124 BFA_FLASH_PART_PORTCFG = 15, /* port cfg partition */
1125 BFA_FLASH_PART_ASICBK = 16, /* asic backup partition */
1129 * flash partition attributes
1131 struct bfa_flash_part_attr_s {
1132 u32 part_type; /* partition type */
1133 u32 part_instance; /* partition instance */
1134 u32 part_off; /* partition offset */
1135 u32 part_size; /* partition size */
1136 u32 part_len; /* partition content length */
1137 u32 part_status; /* partition status */
1138 char rsv[BFA_FLASH_PART_ENTRY_SIZE - 24];
1144 struct bfa_flash_attr_s {
1145 u32 status; /* flash overall status */
1146 u32 npart; /* num of partitions */
1147 struct bfa_flash_part_attr_s part[BFA_FLASH_PART_MAX];
1151 * DIAG module specific
1153 #define LB_PATTERN_DEFAULT 0xB5B5B5B5
1154 #define QTEST_CNT_DEFAULT 10
1155 #define QTEST_PAT_DEFAULT LB_PATTERN_DEFAULT
1156 #define DPORT_ENABLE_LOOPCNT_DEFAULT (1024 * 1024)
1158 struct bfa_diag_memtest_s {
1163 struct bfa_diag_memtest_result {
1166 u32 exp; /* expect value read from reg */
1167 u32 act; /* actually value read */
1168 u32 err_status; /* error status reg */
1169 u32 err_status1; /* extra error info reg */
1170 u32 err_addr; /* error address reg */
1175 struct bfa_diag_loopback_result_s {
1176 u32 numtxmfrm; /* no. of transmit frame */
1177 u32 numosffrm; /* no. of outstanding frame */
1178 u32 numrcvfrm; /* no. of received good frame */
1179 u32 badfrminf; /* mis-match info */
1180 u32 badfrmnum; /* mis-match fram number */
1181 u8 status; /* loopback test result */
1185 enum bfa_diag_dport_test_status {
1186 DPORT_TEST_ST_IDLE = 0, /* the test has not started yet. */
1187 DPORT_TEST_ST_FINAL = 1, /* the test done successfully */
1188 DPORT_TEST_ST_SKIP = 2, /* the test skipped */
1189 DPORT_TEST_ST_FAIL = 3, /* the test failed */
1190 DPORT_TEST_ST_INPRG = 4, /* the testing is in progress */
1191 DPORT_TEST_ST_RESPONDER = 5, /* test triggered from remote port */
1192 DPORT_TEST_ST_STOPPED = 6, /* the test stopped by user. */
1196 enum bfa_diag_dport_test_type {
1197 DPORT_TEST_ELOOP = 0,
1198 DPORT_TEST_OLOOP = 1,
1199 DPORT_TEST_ROLOOP = 2,
1200 DPORT_TEST_LINK = 3,
1204 enum bfa_diag_dport_test_opmode {
1205 BFA_DPORT_OPMODE_AUTO = 0,
1206 BFA_DPORT_OPMODE_MANU = 1,
1209 struct bfa_diag_dport_subtest_result_s {
1210 u8 status; /* bfa_diag_dport_test_status */
1211 u8 rsvd[7]; /* 64bit align */
1212 u64 start_time; /* timestamp */
1215 struct bfa_diag_dport_result_s {
1216 wwn_t rp_pwwn; /* switch port wwn */
1217 wwn_t rp_nwwn; /* switch node wwn */
1218 u64 start_time; /* user/sw start time */
1219 u64 end_time; /* timestamp */
1220 u8 status; /* bfa_diag_dport_test_status */
1221 u8 mode; /* bfa_diag_dport_test_opmode */
1222 u8 rsvd; /* 64bit align */
1223 u8 speed; /* link speed for buf_reqd */
1224 u16 buffer_required;
1225 u16 frmsz; /* frame size for buf_reqd */
1226 u32 lpcnt; /* Frame count */
1227 u32 pat; /* Pattern */
1228 u32 roundtrip_latency; /* in nano sec */
1229 u32 est_cable_distance; /* in meter */
1230 struct bfa_diag_dport_subtest_result_s subtest[DPORT_TEST_MAX];
1233 struct bfa_diag_ledtest_s {
1234 u32 cmd; /* bfa_led_op_t */
1235 u32 color; /* bfa_led_color_t */
1236 u16 freq; /* no. of blinks every 10 secs */
1237 u8 led; /* bitmap of LEDs to be tested */
1241 struct bfa_diag_loopback_s {
1244 u8 lb_mode; /* bfa_port_opmode_t */
1245 u8 speed; /* bfa_port_speed_t */
1250 * PHY module specific
1252 enum bfa_phy_status_e {
1253 BFA_PHY_STATUS_GOOD = 0, /* phy is good */
1254 BFA_PHY_STATUS_NOT_PRESENT = 1, /* phy does not exist */
1255 BFA_PHY_STATUS_BAD = 2, /* phy is bad */
1259 * phy attributes for phy query
1261 struct bfa_phy_attr_s {
1262 u32 status; /* phy present/absent status */
1263 u32 length; /* firmware length */
1264 u32 fw_ver; /* firmware version */
1265 u32 an_status; /* AN status */
1266 u32 pma_pmd_status; /* PMA/PMD link status */
1267 u32 pma_pmd_signal; /* PMA/PMD signal detect */
1268 u32 pcs_status; /* PCS link status */
1274 struct bfa_phy_stats_s {
1275 u32 status; /* phy stats status */
1276 u32 link_breaks; /* Num of link breaks after linkup */
1277 u32 pma_pmd_fault; /* NPMA/PMD fault */
1278 u32 pcs_fault; /* PCS fault */
1279 u32 speed_neg; /* Num of speed negotiation */
1280 u32 tx_eq_training; /* Num of TX EQ training */
1281 u32 tx_eq_timeout; /* Num of TX EQ timeout */
1282 u32 crc_error; /* Num of CRC errors */
1287 #endif /* __BFA_DEFS_H__ */