drivers/scsi/3w-xxxx.c

   1 /*
   2    3w-xxxx.c -- 3ware Storage Controller device driver for Linux.
   3
   4    Written By: Adam Radford <linuxraid@lsi.com>
   5    Modifications By: Joel Jacobson <linux@3ware.com>
   6                      Arnaldo Carvalho de Melo <acme@conectiva.com.br>
   7                      Brad Strand <linux@3ware.com>
   8
   9    Copyright (C) 1999-2010 3ware Inc.
  10
  11    Kernel compatibility By:     Andre Hedrick <andre@suse.com>
  12    Non-Copyright (C) 2000       Andre Hedrick <andre@suse.com>
  13
  14    Further tiny build fixes and trivial hoovering    Alan Cox
  15
  16    This program is free software; you can redistribute it and/or modify
  17    it under the terms of the GNU General Public License as published by
  18    the Free Software Foundation; version 2 of the License.
  19
  20    This program is distributed in the hope that it will be useful,
  21    but WITHOUT ANY WARRANTY; without even the implied warranty of
  22    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23    GNU General Public License for more details.
  24
  25    NO WARRANTY
  26    THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  27    CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  28    LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  29    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  30    solely responsible for determining the appropriateness of using and
  31    distributing the Program and assumes all risks associated with its
  32    exercise of rights under this Agreement, including but not limited to
  33    the risks and costs of program errors, damage to or loss of data,
  34    programs or equipment, and unavailability or interruption of operations.
  35
  36    DISCLAIMER OF LIABILITY
  37    NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  38    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  39    DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  40    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  41    TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  42    USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  43    HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  44
  45    You should have received a copy of the GNU General Public License
  46    along with this program; if not, write to the Free Software
  47    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  48
  49    Bugs/Comments/Suggestions should be mailed to:
  50    linuxraid@lsi.com
  51
  52    For more information, goto:
  53    http://www.lsi.com
  54
  55    History
  56    -------
  57    0.1.000 -     Initial release.
  58    0.4.000 -     Added support for Asynchronous Event Notification through
  59                  ioctls for 3DM.
  60    1.0.000 -     Added DPO & FUA bit support for WRITE_10 & WRITE_6 cdb
  61                  to disable drive write-cache before writes.
  62    1.1.000 -     Fixed performance bug with DPO & FUA not existing for WRITE_6.
  63    1.2.000 -     Added support for clean shutdown notification/feature table.
  64    1.02.00.001 - Added support for full command packet posts through ioctls
  65                  for 3DM.
  66                  Bug fix so hot spare drives don't show up.
  67    1.02.00.002 - Fix bug with tw_setfeature() call that caused oops on some
  68                  systems.
  69    08/21/00    - release previously allocated resources on failure at
  70                  tw_allocate_memory (acme)
  71    1.02.00.003 - Fix tw_interrupt() to report error to scsi layer when
  72                  controller status is non-zero.
  73                  Added handling of request_sense opcode.
  74                  Fix possible null pointer dereference in
  75                  tw_reset_device_extension()
  76    1.02.00.004 - Add support for device id of 3ware 7000 series controllers.
  77                  Make tw_setfeature() call with interrupts disabled.
  78                  Register interrupt handler before enabling interrupts.
  79                  Clear attention interrupt before draining aen queue.
  80    1.02.00.005 - Allocate bounce buffers and custom queue depth for raid5 for
  81                  6000 and 5000 series controllers.
  82                  Reduce polling mdelays causing problems on some systems.
  83                  Fix use_sg = 1 calculation bug.
  84                  Check for scsi_register returning NULL.
  85                  Add aen count to /proc/scsi/3w-xxxx.
  86                  Remove aen code unit masking in tw_aen_complete().
  87    1.02.00.006 - Remove unit from printk in tw_scsi_eh_abort(), causing
  88                  possible oops.
  89                  Fix possible null pointer dereference in tw_scsi_queue()
  90                  if done function pointer was invalid.
  91    1.02.00.007 - Fix possible null pointer dereferences in tw_ioctl().
  92                  Remove check for invalid done function pointer from
  93                  tw_scsi_queue().
  94    1.02.00.008 - Set max sectors per io to TW_MAX_SECTORS in tw_findcards().
  95                  Add tw_decode_error() for printing readable error messages.
  96                  Print some useful information on certain aen codes.
  97                  Add tw_decode_bits() for interpreting status register output.
  98                  Make scsi_set_pci_device() for kernels >= 2.4.4
  99                  Fix bug where aen's could be lost before a reset.
 100                  Re-add spinlocks in tw_scsi_detect().
 101                  Fix possible null pointer dereference in tw_aen_drain_queue()
 102                  during initialization.
 103                  Clear pci parity errors during initialization and during io.
 104    1.02.00.009 - Remove redundant increment in tw_state_request_start().
 105                  Add ioctl support for direct ATA command passthru.
 106                  Add entire aen code string list.
 107    1.02.00.010 - Cleanup queueing code, fix jbod thoughput.
 108                  Fix get_param for specific units.
 109    1.02.00.011 - Fix bug in tw_aen_complete() where aen's could be lost.
 110                  Fix tw_aen_drain_queue() to display useful info at init.
 111                  Set tw_host->max_id for 12 port cards.
 112                  Add ioctl support for raw command packet post from userspace
 113                  with sglist fragments (parameter and io).
 114    1.02.00.012 - Fix read capacity to under report by 1 sector to fix get
 115                  last sector ioctl.
 116    1.02.00.013 - Fix bug where more AEN codes weren't coming out during
 117                  driver initialization.
 118                  Improved handling of PCI aborts.
 119    1.02.00.014 - Fix bug in tw_findcards() where AEN code could be lost.
 120                  Increase timeout in tw_aen_drain_queue() to 30 seconds.
 121    1.02.00.015 - Re-write raw command post with data ioctl method.
 122                  Remove raid5 bounce buffers for raid5 for 6XXX for kernel 2.5
 123                  Add tw_map/unmap_scsi_sg/single_data() for kernel 2.5
 124                  Replace io_request_lock with host_lock for kernel 2.5
 125                  Set max_cmd_len to 16 for 3dm for kernel 2.5
 126    1.02.00.016 - Set host->max_sectors back up to 256.
 127    1.02.00.017 - Modified pci parity error handling/clearing from config space
 128                  during initialization.
 129    1.02.00.018 - Better handling of request sense opcode and sense information
 130                  for failed commands.  Add tw_decode_sense().
 131                  Replace all mdelay()'s with scsi_sleep().
 132    1.02.00.019 - Revert mdelay's and scsi_sleep's, this caused problems on
 133                  some SMP systems.
 134    1.02.00.020 - Add pci_set_dma_mask(), rewrite kmalloc()/virt_to_bus() to
 135                  pci_alloc/free_consistent().
 136                  Better alignment checking in tw_allocate_memory().
 137                  Cleanup tw_initialize_device_extension().
 138    1.02.00.021 - Bump cmd_per_lun in SHT to 255 for better jbod performance.
 139                  Improve handling of errors in tw_interrupt().
 140                  Add handling/clearing of controller queue error.
 141                  Empty stale responses before draining aen queue.
 142                  Fix tw_scsi_eh_abort() to not reset on every io abort.
 143                  Set can_queue in SHT to 255 to prevent hang from AEN.
 144    1.02.00.022 - Fix possible null pointer dereference in tw_scsi_release().
 145    1.02.00.023 - Fix bug in tw_aen_drain_queue() where unit # was always zero.
 146    1.02.00.024 - Add severity levels to AEN strings.
 147    1.02.00.025 - Fix command interrupt spurious error messages.
 148                  Fix bug in raw command post with data ioctl method.
 149                  Fix bug where rollcall sometimes failed with cable errors.
 150                  Print unit # on all command timeouts.
 151    1.02.00.026 - Fix possible infinite retry bug with power glitch induced
 152                  drive timeouts.
 153                  Cleanup some AEN severity levels.
 154    1.02.00.027 - Add drive not supported AEN code for SATA controllers.
 155                  Remove spurious unknown ioctl error message.
 156    1.02.00.028 - Fix bug where multiple controllers with no units were the
 157                  same card number.
 158                  Fix bug where cards were being shut down more than once.
 159    1.02.00.029 - Add missing pci_free_consistent() in tw_allocate_memory().
 160                  Replace pci_map_single() with pci_map_page() for highmem.
 161                  Check for tw_setfeature() failure.
 162    1.02.00.030 - Make driver 64-bit clean.
 163    1.02.00.031 - Cleanup polling timeouts/routines in several places.
 164                  Add support for mode sense opcode.
 165                  Add support for cache mode page.
 166                  Add support for synchronize cache opcode.
 167    1.02.00.032 - Fix small multicard rollcall bug.
 168                  Make driver stay loaded with no units for hot add/swap.
 169                  Add support for "twe" character device for ioctls.
 170                  Clean up request_id queueing code.
 171                  Fix tw_scsi_queue() spinlocks.
 172    1.02.00.033 - Fix tw_aen_complete() to not queue 'queue empty' AEN's.
 173                  Initialize queues correctly when loading with no valid units.
 174    1.02.00.034 - Fix tw_decode_bits() to handle multiple errors.
 175                  Add support for user configurable cmd_per_lun.
 176                  Add support for sht->slave_configure().
 177    1.02.00.035 - Improve tw_allocate_memory() memory allocation.
 178                  Fix tw_chrdev_ioctl() to sleep correctly.
 179    1.02.00.036 - Increase character ioctl timeout to 60 seconds.
 180    1.02.00.037 - Fix tw_ioctl() to handle all non-data ATA passthru cmds
 181                  for 'smartmontools' support.
 182    1.26.00.038 - Roll driver minor version to 26 to denote kernel 2.6.
 183                  Add support for cmds_per_lun module parameter.
 184    1.26.00.039 - Fix bug in tw_chrdev_ioctl() polling code.
 185                  Fix data_buffer_length usage in tw_chrdev_ioctl().
 186                  Update contact information.
 187    1.26.02.000 - Convert driver to pci_driver format.
 188    1.26.02.001 - Increase max ioctl buffer size to 512 sectors.
 189                  Make tw_scsi_queue() return 0 for 'Unknown scsi opcode'.
 190                  Fix tw_remove() to free irq handler/unregister_chrdev()
 191                  before shutting down card.
 192                  Change to new 'change_queue_depth' api.
 193                  Fix 'handled=1' ISR usage, remove bogus IRQ check.
 194    1.26.02.002 - Free irq handler in __tw_shutdown().
 195                  Turn on RCD bit for caching mode page.
 196                  Serialize reset code.
 197    1.26.02.003 - Force 60 second timeout default.
 198 */
 199
 200 #include <linux/module.h>
 201 #include <linux/reboot.h>
 202 #include <linux/smp_lock.h>
 203 #include <linux/spinlock.h>
 204 #include <linux/interrupt.h>
 205 #include <linux/moduleparam.h>
 206 #include <linux/errno.h>
 207 #include <linux/types.h>
 208 #include <linux/delay.h>
 209 #include <linux/gfp.h>
 210 #include <linux/pci.h>
 211 #include <linux/time.h>
 212 #include <linux/mutex.h>
 213 #include <asm/io.h>
 214 #include <asm/irq.h>
 215 #include <asm/uaccess.h>
 216 #include <scsi/scsi.h>
 217 #include <scsi/scsi_host.h>
 218 #include <scsi/scsi_tcq.h>
 219 #include <scsi/scsi_cmnd.h>
 220 #include "3w-xxxx.h"
 221
 222 /* Globals */
 223 #define TW_DRIVER_VERSION "1.26.02.003"
 224 static TW_Device_Extension *tw_device_extension_list[TW_MAX_SLOT];
 225 static int tw_device_extension_count = 0;
 226 static int twe_major = -1;
 227
 228 /* Module parameters */
 229 MODULE_AUTHOR("LSI");
 230 MODULE_DESCRIPTION("3ware Storage Controller Linux Driver");
 231 MODULE_LICENSE("GPL");
 232 MODULE_VERSION(TW_DRIVER_VERSION);
 233
 234 /* Function prototypes */
 235 static int tw_reset_device_extension(TW_Device_Extension *tw_dev);
 236
 237 /* Functions */
 238
 239 /* This function will check the status register for unexpected bits */
 240 static int tw_check_bits(u32 status_reg_value)
 241 {
 242         if ((status_reg_value & TW_STATUS_EXPECTED_BITS) != TW_STATUS_EXPECTED_BITS) {
 243                 dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): No expected bits (0x%x).\n", status_reg_value);
 244                 return 1;
 245         }
 246         if ((status_reg_value & TW_STATUS_UNEXPECTED_BITS) != 0) {
 247                 dprintk(KERN_WARNING "3w-xxxx: tw_check_bits(): Found unexpected bits (0x%x).\n", status_reg_value);
 248                 return 1;
 249         }
 250
 251         return 0;
 252 } /* End tw_check_bits() */
 253
 254 /* This function will print readable messages from status register errors */
 255 static int tw_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value, int print_host)
 256 {
 257         char host[16];
 258
 259         dprintk(KERN_WARNING "3w-xxxx: tw_decode_bits()\n");
 260
 261         if (print_host)
 262                 sprintf(host, " scsi%d:", tw_dev->host->host_no);
 263         else
 264                 host[0] = '\0';
 265
 266         if (status_reg_value & TW_STATUS_PCI_PARITY_ERROR) {
 267                 printk(KERN_WARNING "3w-xxxx:%s PCI Parity Error: clearing.\n", host);
 268                 outl(TW_CONTROL_CLEAR_PARITY_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
 269         }
 270
 271         if (status_reg_value & TW_STATUS_PCI_ABORT) {
 272                 printk(KERN_WARNING "3w-xxxx:%s PCI Abort: clearing.\n", host);
 273                 outl(TW_CONTROL_CLEAR_PCI_ABORT, TW_CONTROL_REG_ADDR(tw_dev));
 274                 pci_write_config_word(tw_dev->tw_pci_dev, PCI_STATUS, TW_PCI_CLEAR_PCI_ABORT);
 275         }
 276
 277         if (status_reg_value & TW_STATUS_QUEUE_ERROR) {
 278                 printk(KERN_WARNING "3w-xxxx:%s Controller Queue Error: clearing.\n", host);
 279                 outl(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
 280         }
 281
 282         if (status_reg_value & TW_STATUS_SBUF_WRITE_ERROR) {
 283                 printk(KERN_WARNING "3w-xxxx:%s SBUF Write Error: clearing.\n", host);
 284                 outl(TW_CONTROL_CLEAR_SBUF_WRITE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
 285         }
 286
 287         if (status_reg_value & TW_STATUS_MICROCONTROLLER_ERROR) {
 288                 if (tw_dev->reset_print == 0) {
 289                         printk(KERN_WARNING "3w-xxxx:%s Microcontroller Error: clearing.\n", host);
 290                         tw_dev->reset_print = 1;
 291                 }
 292                 return 1;
 293         }
 294
 295         return 0;
 296 } /* End tw_decode_bits() */
 297
 298 /* This function will poll the status register for a flag */
 299 static int tw_poll_status(TW_Device_Extension *tw_dev, u32 flag, int seconds)
 300 {
 301         u32 status_reg_value;
 302         unsigned long before;
 303         int retval = 1;
 304
 305         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 306         before = jiffies;
 307
 308         if (tw_check_bits(status_reg_value))
 309                 tw_decode_bits(tw_dev, status_reg_value, 0);
 310
 311         while ((status_reg_value & flag) != flag) {
 312                 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 313
 314                 if (tw_check_bits(status_reg_value))
 315                         tw_decode_bits(tw_dev, status_reg_value, 0);
 316
 317                 if (time_after(jiffies, before + HZ * seconds))
 318                         goto out;
 319
 320                 msleep(50);
 321         }
 322         retval = 0;
 323 out:
 324         return retval;
 325 } /* End tw_poll_status() */
 326
 327 /* This function will poll the status register for disappearance of a flag */
 328 static int tw_poll_status_gone(TW_Device_Extension *tw_dev, u32 flag, int seconds)
 329 {
 330         u32 status_reg_value;
 331         unsigned long before;
 332         int retval = 1;
 333
 334         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 335         before = jiffies;
 336
 337         if (tw_check_bits(status_reg_value))
 338                 tw_decode_bits(tw_dev, status_reg_value, 0);
 339
 340         while ((status_reg_value & flag) != 0) {
 341                 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 342
 343                 if (tw_check_bits(status_reg_value))
 344                         tw_decode_bits(tw_dev, status_reg_value, 0);
 345
 346                 if (time_after(jiffies, before + HZ * seconds))
 347                         goto out;
 348
 349                 msleep(50);
 350         }
 351         retval = 0;
 352 out:
 353         return retval;
 354 } /* End tw_poll_status_gone() */
 355
 356 /* This function will attempt to post a command packet to the board */
 357 static int tw_post_command_packet(TW_Device_Extension *tw_dev, int request_id)
 358 {
 359         u32 status_reg_value;
 360         unsigned long command_que_value;
 361
 362         dprintk(KERN_NOTICE "3w-xxxx: tw_post_command_packet()\n");
 363         command_que_value = tw_dev->command_packet_physical_address[request_id];
 364         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 365
 366         if (tw_check_bits(status_reg_value)) {
 367                 dprintk(KERN_WARNING "3w-xxxx: tw_post_command_packet(): Unexpected bits.\n");
 368                 tw_decode_bits(tw_dev, status_reg_value, 1);
 369         }
 370
 371         if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) {
 372                 /* We successfully posted the command packet */
 373                 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
 374                 tw_dev->state[request_id] = TW_S_POSTED;
 375                 tw_dev->posted_request_count++;
 376                 if (tw_dev->posted_request_count > tw_dev->max_posted_request_count) {
 377                         tw_dev->max_posted_request_count = tw_dev->posted_request_count;
 378                 }
 379         } else {
 380                 /* Couldn't post the command packet, so we do it in the isr */
 381                 if (tw_dev->state[request_id] != TW_S_PENDING) {
 382                         tw_dev->state[request_id] = TW_S_PENDING;
 383                         tw_dev->pending_request_count++;
 384                         if (tw_dev->pending_request_count > tw_dev->max_pending_request_count) {
 385                                 tw_dev->max_pending_request_count = tw_dev->pending_request_count;
 386                         }
 387                         tw_dev->pending_queue[tw_dev->pending_tail] = request_id;
 388                         if (tw_dev->pending_tail == TW_Q_LENGTH-1) {
 389                                 tw_dev->pending_tail = TW_Q_START;
 390                         } else {
 391                                 tw_dev->pending_tail = tw_dev->pending_tail + 1;
 392                         }
 393                 }
 394                 TW_UNMASK_COMMAND_INTERRUPT(tw_dev);
 395                 return 1;
 396         }
 397         return 0;
 398 } /* End tw_post_command_packet() */
 399
 400 /* This function will return valid sense buffer information for failed cmds */
 401 static int tw_decode_sense(TW_Device_Extension *tw_dev, int request_id, int fill_sense)
 402 {
 403         int i;
 404         TW_Command *command;
 405
 406         dprintk(KERN_WARNING "3w-xxxx: tw_decode_sense()\n");
 407         command = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
 408
 409         printk(KERN_WARNING "3w-xxxx: scsi%d: Command failed: status = 0x%x, flags = 0x%x, unit #%d.\n", tw_dev->host->host_no, command->status, command->flags, TW_UNIT_OUT(command->unit__hostid));
 410
 411         /* Attempt to return intelligent sense information */
 412         if (fill_sense) {
 413                 if ((command->status == 0xc7) || (command->status == 0xcb)) {
 414                         for (i = 0; i < ARRAY_SIZE(tw_sense_table); i++) {
 415                                 if (command->flags == tw_sense_table[i][0]) {
 416
 417                                         /* Valid bit and 'current errors' */
 418                                         tw_dev->srb[request_id]->sense_buffer[0] = (0x1 << 7 | 0x70);
 419
 420                                         /* Sense key */
 421                                         tw_dev->srb[request_id]->sense_buffer[2] = tw_sense_table[i][1];
 422
 423                                         /* Additional sense length */
 424                                         tw_dev->srb[request_id]->sense_buffer[7] = 0xa; /* 10 bytes */
 425
 426                                         /* Additional sense code */
 427                                         tw_dev->srb[request_id]->sense_buffer[12] = tw_sense_table[i][2];
 428
 429                                         /* Additional sense code qualifier */
 430                                         tw_dev->srb[request_id]->sense_buffer[13] = tw_sense_table[i][3];
 431
 432                                         tw_dev->srb[request_id]->result = (DID_OK << 16) | (CHECK_CONDITION << 1);
 433                                         return TW_ISR_DONT_RESULT; /* Special case for isr to not over-write result */
 434                                 }
 435                         }
 436                 }
 437
 438                 /* If no table match, error so we get a reset */
 439                 return 1;
 440         }
 441
 442         return 0;
 443 } /* End tw_decode_sense() */
 444
 445 /* This function will report controller error status */
 446 static int tw_check_errors(TW_Device_Extension *tw_dev)
 447 {
 448         u32 status_reg_value;
 449
 450         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 451
 452         if (TW_STATUS_ERRORS(status_reg_value) || tw_check_bits(status_reg_value)) {
 453                 tw_decode_bits(tw_dev, status_reg_value, 0);
 454                 return 1;
 455         }
 456
 457         return 0;
 458 } /* End tw_check_errors() */
 459
 460 /* This function will empty the response que */
 461 static void tw_empty_response_que(TW_Device_Extension *tw_dev)
 462 {
 463         u32 status_reg_value, response_que_value;
 464
 465         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 466
 467         while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
 468                 response_que_value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
 469                 status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 470         }
 471 } /* End tw_empty_response_que() */
 472
 473 /* This function will free a request_id */
 474 static void tw_state_request_finish(TW_Device_Extension *tw_dev, int request_id)
 475 {
 476         tw_dev->free_queue[tw_dev->free_tail] = request_id;
 477         tw_dev->state[request_id] = TW_S_FINISHED;
 478         tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
 479 } /* End tw_state_request_finish() */
 480
 481 /* This function will assign an available request_id */
 482 static void tw_state_request_start(TW_Device_Extension *tw_dev, int *request_id)
 483 {
 484         *request_id = tw_dev->free_queue[tw_dev->free_head];
 485         tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH;
 486         tw_dev->state[*request_id] = TW_S_STARTED;
 487 } /* End tw_state_request_start() */
 488
 489 /* Show some statistics about the card */
 490 static ssize_t tw_show_stats(struct device *dev, struct device_attribute *attr,
 491                              char *buf)
 492 {
 493         struct Scsi_Host *host = class_to_shost(dev);
 494         TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
 495         unsigned long flags = 0;
 496         ssize_t len;
 497
 498         spin_lock_irqsave(tw_dev->host->host_lock, flags);
 499         len = snprintf(buf, PAGE_SIZE, "3w-xxxx Driver version: %s\n"
 500                        "Current commands posted:   %4d\n"
 501                        "Max commands posted:       %4d\n"
 502                        "Current pending commands:  %4d\n"
 503                        "Max pending commands:      %4d\n"
 504                        "Last sgl length:           %4d\n"
 505                        "Max sgl length:            %4d\n"
 506                        "Last sector count:         %4d\n"
 507                        "Max sector count:          %4d\n"
 508                        "SCSI Host Resets:          %4d\n"
 509                        "AEN's:                     %4d\n",
 510                        TW_DRIVER_VERSION,
 511                        tw_dev->posted_request_count,
 512                        tw_dev->max_posted_request_count,
 513                        tw_dev->pending_request_count,
 514                        tw_dev->max_pending_request_count,
 515                        tw_dev->sgl_entries,
 516                        tw_dev->max_sgl_entries,
 517                        tw_dev->sector_count,
 518                        tw_dev->max_sector_count,
 519                        tw_dev->num_resets,
 520                        tw_dev->aen_count);
 521         spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
 522         return len;
 523 } /* End tw_show_stats() */
 524
 525 /* This function will set a devices queue depth */
 526 static int tw_change_queue_depth(struct scsi_device *sdev, int queue_depth,
 527                                  int reason)
 528 {
 529         if (reason != SCSI_QDEPTH_DEFAULT)
 530                 return -EOPNOTSUPP;
 531
 532         if (queue_depth > TW_Q_LENGTH-2)
 533                 queue_depth = TW_Q_LENGTH-2;
 534         scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
 535         return queue_depth;
 536 } /* End tw_change_queue_depth() */
 537
 538 /* Create sysfs 'stats' entry */
 539 static struct device_attribute tw_host_stats_attr = {
 540         .attr = {
 541                 .name =         "stats",
 542                 .mode =         S_IRUGO,
 543         },
 544         .show = tw_show_stats
 545 };
 546
 547 /* Host attributes initializer */
 548 static struct device_attribute *tw_host_attrs[] = {
 549         &tw_host_stats_attr,
 550         NULL,
 551 };
 552
 553 /* This function will read the aen queue from the isr */
 554 static int tw_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
 555 {
 556         TW_Command *command_packet;
 557         TW_Param *param;
 558         unsigned long command_que_value;
 559         u32 status_reg_value;
 560         unsigned long param_value = 0;
 561
 562         dprintk(KERN_NOTICE "3w-xxxx: tw_aen_read_queue()\n");
 563
 564         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
 565         if (tw_check_bits(status_reg_value)) {
 566                 dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Unexpected bits.\n");
 567                 tw_decode_bits(tw_dev, status_reg_value, 1);
 568                 return 1;
 569         }
 570         if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
 571                 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet virtual address.\n");
 572                 return 1;
 573         }
 574         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
 575         memset(command_packet, 0, sizeof(TW_Sector));
 576         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
 577         command_packet->size = 4;
 578         command_packet->request_id = request_id;
 579         command_packet->status = 0;
 580         command_packet->flags = 0;
 581         command_packet->byte6.parameter_count = 1;
 582         command_que_value = tw_dev->command_packet_physical_address[request_id];
 583         if (command_que_value == 0) {
 584                 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet physical address.\n");
 585                 return 1;
 586         }
 587         /* Now setup the param */
 588         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
 589                 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment virtual address.\n");
 590                 return 1;
 591         }
 592         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
 593         memset(param, 0, sizeof(TW_Sector));
 594         param->table_id = 0x401; /* AEN table */
 595         param->parameter_id = 2; /* Unit code */
 596         param->parameter_size_bytes = 2;
 597         param_value = tw_dev->alignment_physical_address[request_id];
 598         if (param_value == 0) {
 599                 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment physical address.\n");
 600                 return 1;
 601         }
 602         command_packet->byte8.param.sgl[0].address = param_value;
 603         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
 604
 605         /* Now post the command packet */
 606         if ((status_reg_value & TW_STATUS_COMMAND_QUEUE_FULL) == 0) {
 607                 dprintk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post succeeded.\n");
 608                 tw_dev->srb[request_id] = NULL; /* Flag internal command */
 609                 tw_dev->state[request_id] = TW_S_POSTED;
 610                 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
 611         } else {
 612                 printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post failed, will retry.\n");
 613                 return 1;
 614         }
 615
 616         return 0;
 617 } /* End tw_aen_read_queue() */
 618
 619 /* This function will complete an aen request from the isr */
 620 static int tw_aen_complete(TW_Device_Extension *tw_dev, int request_id)
 621 {
 622         TW_Param *param;
 623         unsigned short aen;
 624         int error = 0, table_max = 0;
 625
 626         dprintk(KERN_WARNING "3w-xxxx: tw_aen_complete()\n");
 627         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
 628                 printk(KERN_WARNING "3w-xxxx: tw_aen_complete(): Bad alignment virtual address.\n");
 629                 return 1;
 630         }
 631         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
 632         aen = *(unsigned short *)(param->data);
 633         dprintk(KERN_NOTICE "3w-xxxx: tw_aen_complete(): Queue'd code 0x%x\n", aen);
 634
 635         /* Print some useful info when certain aen codes come out */
 636         if (aen == 0x0ff) {
 637                 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: INFO: AEN queue overflow.\n", tw_dev->host->host_no);
 638         } else {
 639                 table_max = ARRAY_SIZE(tw_aen_string);
 640                 if ((aen & 0x0ff) < table_max) {
 641                         if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') {
 642                                 printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s%d.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff], aen >> 8);
 643                         } else {
 644                                 if (aen != 0x0)
 645                                         printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff]);
 646                         }
 647                 } else {
 648                         printk(KERN_WARNING "3w-xxxx: scsi%d: Received AEN %d.\n", tw_dev->host->host_no, aen);
 649                 }
 650         }
 651         if (aen != TW_AEN_QUEUE_EMPTY) {
 652                 tw_dev->aen_count++;
 653
 654                 /* Now queue the code */
 655                 tw_dev->aen_queue[tw_dev->aen_tail] = aen;
 656                 if (tw_dev->aen_tail == TW_Q_LENGTH - 1) {
 657                         tw_dev->aen_tail = TW_Q_START;
 658                 } else {
 659                         tw_dev->aen_tail = tw_dev->aen_tail + 1;
 660                 }
 661                 if (tw_dev->aen_head == tw_dev->aen_tail) {
 662                         if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
 663                                 tw_dev->aen_head = TW_Q_START;
 664                         } else {
 665                                 tw_dev->aen_head = tw_dev->aen_head + 1;
 666                         }
 667                 }
 668
 669                 error = tw_aen_read_queue(tw_dev, request_id);
 670                 if (error) {
 671                         printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing AEN.\n", tw_dev->host->host_no);
 672                         tw_dev->state[request_id] = TW_S_COMPLETED;
 673                         tw_state_request_finish(tw_dev, request_id);
 674                 }
 675         } else {
 676                 tw_dev->state[request_id] = TW_S_COMPLETED;
 677                 tw_state_request_finish(tw_dev, request_id);
 678         }
 679
 680         return 0;
 681 } /* End tw_aen_complete() */
 682
 683 /* This function will drain the aen queue after a soft reset */
 684 static int tw_aen_drain_queue(TW_Device_Extension *tw_dev)
 685 {
 686         TW_Command *command_packet;
 687         TW_Param *param;
 688         int request_id = 0;
 689         unsigned long command_que_value;
 690         unsigned long param_value;
 691         TW_Response_Queue response_queue;
 692         unsigned short aen;
 693         unsigned short aen_code;
 694         int finished = 0;
 695         int first_reset = 0;
 696         int queue = 0;
 697         int found = 0, table_max = 0;
 698
 699         dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue()\n");
 700
 701         if (tw_poll_status(tw_dev, TW_STATUS_ATTENTION_INTERRUPT | TW_STATUS_MICROCONTROLLER_READY, 30)) {
 702                 dprintk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): No attention interrupt for card %d.\n", tw_device_extension_count);
 703                 return 1;
 704         }
 705         TW_CLEAR_ATTENTION_INTERRUPT(tw_dev);
 706
 707         /* Empty response queue */
 708         tw_empty_response_que(tw_dev);
 709
 710         /* Initialize command packet */
 711         if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
 712                 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet virtual address.\n");
 713                 return 1;
 714         }
 715         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
 716         memset(command_packet, 0, sizeof(TW_Sector));
 717         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
 718         command_packet->size = 4;
 719         command_packet->request_id = request_id;
 720         command_packet->status = 0;
 721         command_packet->flags = 0;
 722         command_packet->byte6.parameter_count = 1;
 723         command_que_value = tw_dev->command_packet_physical_address[request_id];
 724         if (command_que_value == 0) {
 725                 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet physical address.\n");
 726                 return 1;
 727         }
 728
 729         /* Now setup the param */
 730         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
 731                 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment virtual address.\n");
 732                 return 1;
 733         }
 734         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
 735         memset(param, 0, sizeof(TW_Sector));
 736         param->table_id = 0x401; /* AEN table */
 737         param->parameter_id = 2; /* Unit code */
 738         param->parameter_size_bytes = 2;
 739         param_value = tw_dev->alignment_physical_address[request_id];
 740         if (param_value == 0) {
 741                 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment physical address.\n");
 742                 return 1;
 743         }
 744         command_packet->byte8.param.sgl[0].address = param_value;
 745         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
 746
 747         /* Now drain the controller's aen queue */
 748         do {
 749                 /* Post command packet */
 750                 outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
 751
 752                 /* Now poll for completion */
 753                 if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
 754                         response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
 755                         request_id = TW_RESID_OUT(response_queue.response_id);
 756
 757                         if (request_id != 0) {
 758                                 /* Unexpected request id */
 759                                 printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Unexpected request id.\n");
 760                                 return 1;
 761                         }
 762
 763                         if (command_packet->status != 0) {
 764                                 if (command_packet->flags != TW_AEN_TABLE_UNDEFINED) {
 765                                         /* Bad response */
 766                                         tw_decode_sense(tw_dev, request_id, 0);
 767                                         return 1;
 768                                 } else {
 769                                         /* We know this is a 3w-1x00, and doesn't support aen's */
 770                                         return 0;
 771                                 }
 772                         }
 773
 774                         /* Now check the aen */
 775                         aen = *(unsigned short *)(param->data);
 776                         aen_code = (aen & 0x0ff);
 777                         queue = 0;
 778                         switch (aen_code) {
 779                                 case TW_AEN_QUEUE_EMPTY:
 780                                         dprintk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
 781                                         if (first_reset != 1) {
 782                                                 return 1;
 783                                         } else {
 784                                                 finished = 1;
 785                                         }
 786                                         break;
 787                                 case TW_AEN_SOFT_RESET:
 788                                         if (first_reset == 0) {
 789                                                 first_reset = 1;
 790                                         } else {
 791                                                 printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
 792                                                 tw_dev->aen_count++;
 793                                                 queue = 1;
 794                                         }
 795                                         break;
 796                                 default:
 797                                         if (aen == 0x0ff) {
 798                                                 printk(KERN_WARNING "3w-xxxx: AEN: INFO: AEN queue overflow.\n");
 799                                         } else {
 800                                                 table_max = ARRAY_SIZE(tw_aen_string);
 801                                                 if ((aen & 0x0ff) < table_max) {
 802                                                         if ((tw_aen_string[aen & 0xff][strlen(tw_aen_string[aen & 0xff])-1]) == '#') {
 803                                                                 printk(KERN_WARNING "3w-xxxx: AEN: %s%d.\n", tw_aen_string[aen & 0xff], aen >> 8);
 804                                                         } else {
 805                                                                 printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
 806                                                         }
 807                                                 } else
 808                                                         printk(KERN_WARNING "3w-xxxx: Received AEN %d.\n", aen);
 809                                         }
 810                                         tw_dev->aen_count++;
 811                                         queue = 1;
 812                         }
 813
 814                         /* Now put the aen on the aen_queue */
 815                         if (queue == 1) {
 816                                 tw_dev->aen_queue[tw_dev->aen_tail] = aen;
 817                                 if (tw_dev->aen_tail == TW_Q_LENGTH - 1) {
 818                                         tw_dev->aen_tail = TW_Q_START;
 819                                 } else {
 820                                         tw_dev->aen_tail = tw_dev->aen_tail + 1;
 821                                 }
 822                                 if (tw_dev->aen_head == tw_dev->aen_tail) {
 823                                         if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
 824                                                 tw_dev->aen_head = TW_Q_START;
 825                                         } else {
 826                                                 tw_dev->aen_head = tw_dev->aen_head + 1;
 827                                         }
 828                                 }
 829                         }
 830                         found = 1;
 831                 }
 832                 if (found == 0) {
 833                         printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Response never received.\n");
 834                         return 1;
 835                 }
 836         } while (finished == 0);
 837
 838         return 0;
 839 } /* End tw_aen_drain_queue() */
 840
 841 /* This function will allocate memory */
 842 static int tw_allocate_memory(TW_Device_Extension *tw_dev, int size, int which)
 843 {
 844         int i;
 845         dma_addr_t dma_handle;
 846         unsigned long *cpu_addr = NULL;
 847
 848         dprintk(KERN_NOTICE "3w-xxxx: tw_allocate_memory()\n");
 849
 850         cpu_addr = pci_alloc_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, &dma_handle);
 851         if (cpu_addr == NULL) {
 852                 printk(KERN_WARNING "3w-xxxx: pci_alloc_consistent() failed.\n");
 853                 return 1;
 854         }
 855
 856         if ((unsigned long)cpu_addr % (tw_dev->tw_pci_dev->device == TW_DEVICE_ID ? TW_ALIGNMENT_6000 : TW_ALIGNMENT_7000)) {
 857                 printk(KERN_WARNING "3w-xxxx: Couldn't allocate correctly aligned memory.\n");
 858                 pci_free_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, cpu_addr, dma_handle);
 859                 return 1;
 860         }
 861
 862         memset(cpu_addr, 0, size*TW_Q_LENGTH);
 863
 864         for (i=0;i<TW_Q_LENGTH;i++) {
 865                 switch(which) {
 866                 case 0:
 867                         tw_dev->command_packet_physical_address[i] = dma_handle+(i*size);
 868                         tw_dev->command_packet_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
 869                         break;
 870                 case 1:
 871                         tw_dev->alignment_physical_address[i] = dma_handle+(i*size);
 872                         tw_dev->alignment_virtual_address[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
 873                         break;
 874                 default:
 875                         printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): case slip in tw_allocate_memory()\n");
 876                         return 1;
 877                 }
 878         }
 879
 880         return 0;
 881 } /* End tw_allocate_memory() */
 882
 883 /* This function handles ioctl for the character device */
 884 static long tw_chrdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 885 {
 886         int request_id;
 887         dma_addr_t dma_handle;
 888         unsigned short tw_aen_code;
 889         unsigned long flags;
 890         unsigned int data_buffer_length = 0;
 891         unsigned long data_buffer_length_adjusted = 0;
 892         struct inode *inode = file->f_dentry->d_inode;
 893         unsigned long *cpu_addr;
 894         long timeout;
 895         TW_New_Ioctl *tw_ioctl;
 896         TW_Passthru *passthru;
 897         TW_Device_Extension *tw_dev = tw_device_extension_list[iminor(inode)];
 898         int retval = -EFAULT;
 899         void __user *argp = (void __user *)arg;
 900
 901         dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl()\n");
 902
 903         lock_kernel();
 904         /* Only let one of these through at a time */
 905         if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) {
 906                 unlock_kernel();
 907                 return -EINTR;
 908         }
 909
 910         /* First copy down the buffer length */
 911         if (copy_from_user(&data_buffer_length, argp, sizeof(unsigned int)))
 912                 goto out;
 913
 914         /* Check size */
 915         if (data_buffer_length > TW_MAX_IOCTL_SECTORS * 512) {
 916                 retval = -EINVAL;
 917                 goto out;
 918         }
 919
 920         /* Hardware can only do multiple of 512 byte transfers */
 921         data_buffer_length_adjusted = (data_buffer_length + 511) & ~511;
 922
 923         /* Now allocate ioctl buf memory */
 924         cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, &dma_handle, GFP_KERNEL);
 925         if (cpu_addr == NULL) {
 926                 retval = -ENOMEM;
 927                 goto out;
 928         }
 929
 930         tw_ioctl = (TW_New_Ioctl *)cpu_addr;
 931
 932         /* Now copy down the entire ioctl */
 933         if (copy_from_user(tw_ioctl, argp, data_buffer_length + sizeof(TW_New_Ioctl) - 1))
 934                 goto out2;
 935
 936         passthru = (TW_Passthru *)&tw_ioctl->firmware_command;
 937
 938         /* See which ioctl we are doing */
 939         switch (cmd) {
 940                 case TW_OP_NOP:
 941                         dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_OP_NOP.\n");
 942                         break;
 943                 case TW_OP_AEN_LISTEN:
 944                         dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_AEN_LISTEN.\n");
 945                         memset(tw_ioctl->data_buffer, 0, data_buffer_length);
 946
 947                         spin_lock_irqsave(tw_dev->host->host_lock, flags);
 948                         if (tw_dev->aen_head == tw_dev->aen_tail) {
 949                                 tw_aen_code = TW_AEN_QUEUE_EMPTY;
 950                         } else {
 951                                 tw_aen_code = tw_dev->aen_queue[tw_dev->aen_head];
 952                                 if (tw_dev->aen_head == TW_Q_LENGTH - 1) {
 953                                         tw_dev->aen_head = TW_Q_START;
 954                                 } else {
 955                                         tw_dev->aen_head = tw_dev->aen_head + 1;
 956                                 }
 957                         }
 958                         spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
 959                         memcpy(tw_ioctl->data_buffer, &tw_aen_code, sizeof(tw_aen_code));
 960                         break;
 961                 case TW_CMD_PACKET_WITH_DATA:
 962                         dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_CMD_PACKET_WITH_DATA.\n");
 963                         spin_lock_irqsave(tw_dev->host->host_lock, flags);
 964
 965                         tw_state_request_start(tw_dev, &request_id);
 966
 967                         /* Flag internal command */
 968                         tw_dev->srb[request_id] = NULL;
 969
 970                         /* Flag chrdev ioctl */
 971                         tw_dev->chrdev_request_id = request_id;
 972
 973                         tw_ioctl->firmware_command.request_id = request_id;
 974
 975                         /* Load the sg list */
 976                         switch (TW_SGL_OUT(tw_ioctl->firmware_command.opcode__sgloffset)) {
 977                         case 2:
 978                                 tw_ioctl->firmware_command.byte8.param.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
 979                                 tw_ioctl->firmware_command.byte8.param.sgl[0].length = data_buffer_length_adjusted;
 980                                 break;
 981                         case 3:
 982                                 tw_ioctl->firmware_command.byte8.io.sgl[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
 983                                 tw_ioctl->firmware_command.byte8.io.sgl[0].length = data_buffer_length_adjusted;
 984                                 break;
 985                         case 5:
 986                                 passthru->sg_list[0].address = dma_handle + sizeof(TW_New_Ioctl) - 1;
 987                                 passthru->sg_list[0].length = data_buffer_length_adjusted;
 988                                 break;
 989                         }
 990
 991                         memcpy(tw_dev->command_packet_virtual_address[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command));
 992
 993                         /* Now post the command packet to the controller */
 994                         tw_post_command_packet(tw_dev, request_id);
 995                         spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
 996
 997                         timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ;
 998
 999                         /* Now wait for the command to complete */
1000                         timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
1001
1002                         /* We timed out, and didn't get an interrupt */
1003                         if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
1004                                 /* Now we need to reset the board */
1005                                 printk(KERN_WARNING "3w-xxxx: scsi%d: Character ioctl (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, cmd);
1006                                 retval = -EIO;
1007                                 if (tw_reset_device_extension(tw_dev)) {
1008                                         printk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): Reset failed for card %d.\n", tw_dev->host->host_no);
1009                                 }
1010                                 goto out2;
1011                         }
1012
1013                         /* Now copy in the command packet response */
1014                         memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virtual_address[request_id], sizeof(TW_Command));
1015
1016                         /* Now complete the io */
1017                         spin_lock_irqsave(tw_dev->host->host_lock, flags);
1018                         tw_dev->posted_request_count--;
1019                         tw_dev->state[request_id] = TW_S_COMPLETED;
1020                         tw_state_request_finish(tw_dev, request_id);
1021                         spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
1022                         break;
1023                 default:
1024                         retval = -ENOTTY;
1025                         goto out2;
1026         }
1027
1028         /* Now copy the response to userspace */
1029         if (copy_to_user(argp, tw_ioctl, sizeof(TW_New_Ioctl) + data_buffer_length - 1))
1030                 goto out2;
1031         retval = 0;
1032 out2:
1033         /* Now free ioctl buf memory */
1034         dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_New_Ioctl) - 1, cpu_addr, dma_handle);
1035 out:
1036         mutex_unlock(&tw_dev->ioctl_lock);
1037         unlock_kernel();
1038         return retval;
1039 } /* End tw_chrdev_ioctl() */
1040
1041 /* This function handles open for the character device */
1042 /* NOTE that this function races with remove. */
1043 static int tw_chrdev_open(struct inode *inode, struct file *file)
1044 {
1045         unsigned int minor_number;
1046
1047         cycle_kernel_lock();
1048         dprintk(KERN_WARNING "3w-xxxx: tw_ioctl_open()\n");
1049
1050         minor_number = iminor(inode);
1051         if (minor_number >= tw_device_extension_count)
1052                 return -ENODEV;
1053
1054         return 0;
1055 } /* End tw_chrdev_open() */
1056
1057 /* File operations struct for character device */
1058 static const struct file_operations tw_fops = {
1059         .owner          = THIS_MODULE,
1060         .unlocked_ioctl = tw_chrdev_ioctl,
1061         .open           = tw_chrdev_open,
1062         .release        = NULL
1063 };
1064
1065 /* This function will free up device extension resources */
1066 static void tw_free_device_extension(TW_Device_Extension *tw_dev)
1067 {
1068         dprintk(KERN_NOTICE "3w-xxxx: tw_free_device_extension()\n");
1069
1070         /* Free command packet and generic buffer memory */
1071         if (tw_dev->command_packet_virtual_address[0])
1072                 pci_free_consistent(tw_dev->tw_pci_dev, sizeof(TW_Command)*TW_Q_LENGTH, tw_dev->command_packet_virtual_address[0], tw_dev->command_packet_physical_address[0]);
1073
1074         if (tw_dev->alignment_virtual_address[0])
1075                 pci_free_consistent(tw_dev->tw_pci_dev, sizeof(TW_Sector)*TW_Q_LENGTH, tw_dev->alignment_virtual_address[0], tw_dev->alignment_physical_address[0]);
1076 } /* End tw_free_device_extension() */
1077
1078 /* This function will send an initconnection command to controller */
1079 static int tw_initconnection(TW_Device_Extension *tw_dev, int message_credits)
1080 {
1081         unsigned long command_que_value;
1082         TW_Command  *command_packet;
1083         TW_Response_Queue response_queue;
1084         int request_id = 0;
1085
1086         dprintk(KERN_NOTICE "3w-xxxx: tw_initconnection()\n");
1087
1088         /* Initialize InitConnection command packet */
1089         if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
1090                 printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet virtual address.\n");
1091                 return 1;
1092         }
1093
1094         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1095         memset(command_packet, 0, sizeof(TW_Sector));
1096         command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_INIT_CONNECTION);
1097         command_packet->size = TW_INIT_COMMAND_PACKET_SIZE;
1098         command_packet->request_id = request_id;
1099         command_packet->status = 0x0;
1100         command_packet->flags = 0x0;
1101         command_packet->byte6.message_credits = message_credits;
1102         command_packet->byte8.init_connection.response_queue_pointer = 0x0;
1103         command_que_value = tw_dev->command_packet_physical_address[request_id];
1104
1105         if (command_que_value == 0) {
1106                 printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet physical address.\n");
1107                 return 1;
1108         }
1109
1110         /* Send command packet to the board */
1111         outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
1112
1113         /* Poll for completion */
1114         if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
1115                 response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
1116                 request_id = TW_RESID_OUT(response_queue.response_id);
1117
1118                 if (request_id != 0) {
1119                         /* unexpected request id */
1120                         printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Unexpected request id.\n");
1121                         return 1;
1122                 }
1123                 if (command_packet->status != 0) {
1124                         /* bad response */
1125                         tw_decode_sense(tw_dev, request_id, 0);
1126                         return 1;
1127                 }
1128         }
1129         return 0;
1130 } /* End tw_initconnection() */
1131
1132 /* Set a value in the features table */
1133 static int tw_setfeature(TW_Device_Extension *tw_dev, int parm, int param_size,
1134                   unsigned char *val)
1135 {
1136         TW_Param *param;
1137         TW_Command  *command_packet;
1138         TW_Response_Queue response_queue;
1139         int request_id = 0;
1140         unsigned long command_que_value;
1141         unsigned long param_value;
1142
1143         /* Initialize SetParam command packet */
1144         if (tw_dev->command_packet_virtual_address[request_id] == NULL) {
1145                 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet virtual address.\n");
1146                 return 1;
1147         }
1148         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1149         memset(command_packet, 0, sizeof(TW_Sector));
1150         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1151
1152         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM);
1153         param->table_id = 0x404;  /* Features table */
1154         param->parameter_id = parm;
1155         param->parameter_size_bytes = param_size;
1156         memcpy(param->data, val, param_size);
1157
1158         param_value = tw_dev->alignment_physical_address[request_id];
1159         if (param_value == 0) {
1160                 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad alignment physical address.\n");
1161                 tw_dev->state[request_id] = TW_S_COMPLETED;
1162                 tw_state_request_finish(tw_dev, request_id);
1163                 tw_dev->srb[request_id]->result = (DID_OK << 16);
1164                 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1165         }
1166         command_packet->byte8.param.sgl[0].address = param_value;
1167         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1168
1169         command_packet->size = 4;
1170         command_packet->request_id = request_id;
1171         command_packet->byte6.parameter_count = 1;
1172
1173         command_que_value = tw_dev->command_packet_physical_address[request_id];
1174         if (command_que_value == 0) {
1175                 printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet physical address.\n");
1176         return 1;
1177         }
1178
1179         /* Send command packet to the board */
1180         outl(command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
1181
1182         /* Poll for completion */
1183         if (tw_poll_status_gone(tw_dev, TW_STATUS_RESPONSE_QUEUE_EMPTY, 30) == 0) {
1184                 response_queue.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
1185                 request_id = TW_RESID_OUT(response_queue.response_id);
1186
1187                 if (request_id != 0) {
1188                         /* unexpected request id */
1189                         printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Unexpected request id.\n");
1190                         return 1;
1191                 }
1192                 if (command_packet->status != 0) {
1193                         /* bad response */
1194                         tw_decode_sense(tw_dev, request_id, 0);
1195                         return 1;
1196                 }
1197         }
1198
1199         return 0;
1200 } /* End tw_setfeature() */
1201
1202 /* This function will reset a controller */
1203 static int tw_reset_sequence(TW_Device_Extension *tw_dev)
1204 {
1205         int error = 0;
1206         int tries = 0;
1207         unsigned char c = 1;
1208
1209         /* Reset the board */
1210         while (tries < TW_MAX_RESET_TRIES) {
1211                 TW_SOFT_RESET(tw_dev);
1212
1213                 error = tw_aen_drain_queue(tw_dev);
1214                 if (error) {
1215                         printk(KERN_WARNING "3w-xxxx: scsi%d: AEN drain failed, retrying.\n", tw_dev->host->host_no);
1216                         tries++;
1217                         continue;
1218                 }
1219
1220                 /* Check for controller errors */
1221                 if (tw_check_errors(tw_dev)) {
1222                         printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors found, retrying.\n", tw_dev->host->host_no);
1223                         tries++;
1224                         continue;
1225                 }
1226
1227                 /* Now the controller is in a good state */
1228                 break;
1229         }
1230
1231         if (tries >= TW_MAX_RESET_TRIES) {
1232                 printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors, card not responding, check all cabling.\n", tw_dev->host->host_no);
1233                 return 1;
1234         }
1235
1236         error = tw_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS);
1237         if (error) {
1238                 printk(KERN_WARNING "3w-xxxx: scsi%d: Connection initialization failed.\n", tw_dev->host->host_no);
1239                 return 1;
1240         }
1241
1242         error = tw_setfeature(tw_dev, 2, 1, &c);
1243         if (error) {
1244                 printk(KERN_WARNING "3w-xxxx: Unable to set features for card, probable old firmware or card.\n");
1245         }
1246
1247         return 0;
1248 } /* End tw_reset_sequence() */
1249
1250 /* This function will initialize the fields of a device extension */
1251 static int tw_initialize_device_extension(TW_Device_Extension *tw_dev)
1252 {
1253         int i, error=0;
1254
1255         dprintk(KERN_NOTICE "3w-xxxx: tw_initialize_device_extension()\n");
1256
1257         /* Initialize command packet buffers */
1258         error = tw_allocate_memory(tw_dev, sizeof(TW_Command), 0);
1259         if (error) {
1260                 printk(KERN_WARNING "3w-xxxx: Command packet memory allocation failed.\n");
1261                 return 1;
1262         }
1263
1264         /* Initialize generic buffer */
1265         error = tw_allocate_memory(tw_dev, sizeof(TW_Sector), 1);
1266         if (error) {
1267                 printk(KERN_WARNING "3w-xxxx: Generic memory allocation failed.\n");
1268                 return 1;
1269         }
1270
1271         for (i=0;i<TW_Q_LENGTH;i++) {
1272                 tw_dev->free_queue[i] = i;
1273                 tw_dev->state[i] = TW_S_INITIAL;
1274         }
1275
1276         tw_dev->pending_head = TW_Q_START;
1277         tw_dev->pending_tail = TW_Q_START;
1278         tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
1279
1280         mutex_init(&tw_dev->ioctl_lock);
1281         init_waitqueue_head(&tw_dev->ioctl_wqueue);
1282
1283         return 0;
1284 } /* End tw_initialize_device_extension() */
1285
1286 static int tw_map_scsi_sg_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
1287 {
1288         int use_sg;
1289
1290         dprintk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data()\n");
1291
1292         use_sg = scsi_dma_map(cmd);
1293         if (use_sg < 0) {
1294                 printk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data(): pci_map_sg() failed.\n");
1295                 return 0;
1296         }
1297
1298         cmd->SCp.phase = TW_PHASE_SGLIST;
1299         cmd->SCp.have_data_in = use_sg;
1300
1301         return use_sg;
1302 } /* End tw_map_scsi_sg_data() */
1303
1304 static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
1305 {
1306         dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n");
1307
1308         if (cmd->SCp.phase == TW_PHASE_SGLIST)
1309                 scsi_dma_unmap(cmd);
1310 } /* End tw_unmap_scsi_data() */
1311
1312 /* This function will reset a device extension */
1313 static int tw_reset_device_extension(TW_Device_Extension *tw_dev)
1314 {
1315         int i = 0;
1316         struct scsi_cmnd *srb;
1317         unsigned long flags = 0;
1318
1319         dprintk(KERN_NOTICE "3w-xxxx: tw_reset_device_extension()\n");
1320
1321         set_bit(TW_IN_RESET, &tw_dev->flags);
1322         TW_DISABLE_INTERRUPTS(tw_dev);
1323         TW_MASK_COMMAND_INTERRUPT(tw_dev);
1324         spin_lock_irqsave(tw_dev->host->host_lock, flags);
1325
1326         /* Abort all requests that are in progress */
1327         for (i=0;i<TW_Q_LENGTH;i++) {
1328                 if ((tw_dev->state[i] != TW_S_FINISHED) &&
1329                     (tw_dev->state[i] != TW_S_INITIAL) &&
1330                     (tw_dev->state[i] != TW_S_COMPLETED)) {
1331                         srb = tw_dev->srb[i];
1332                         if (srb != NULL) {
1333                                 srb->result = (DID_RESET << 16);
1334                                 tw_dev->srb[i]->scsi_done(tw_dev->srb[i]);
1335                                 tw_unmap_scsi_data(tw_dev->tw_pci_dev, tw_dev->srb[i]);
1336                         }
1337                 }
1338         }
1339
1340         /* Reset queues and counts */
1341         for (i=0;i<TW_Q_LENGTH;i++) {
1342                 tw_dev->free_queue[i] = i;
1343                 tw_dev->state[i] = TW_S_INITIAL;
1344         }
1345         tw_dev->free_head = TW_Q_START;
1346         tw_dev->free_tail = TW_Q_START;
1347         tw_dev->posted_request_count = 0;
1348         tw_dev->pending_request_count = 0;
1349         tw_dev->pending_head = TW_Q_START;
1350         tw_dev->pending_tail = TW_Q_START;
1351         tw_dev->reset_print = 0;
1352
1353         spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
1354
1355         if (tw_reset_sequence(tw_dev)) {
1356                 printk(KERN_WARNING "3w-xxxx: scsi%d: Reset sequence failed.\n", tw_dev->host->host_no);
1357                 return 1;
1358         }
1359
1360         TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
1361         clear_bit(TW_IN_RESET, &tw_dev->flags);
1362         tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
1363
1364         return 0;
1365 } /* End tw_reset_device_extension() */
1366
1367 /* This funciton returns unit geometry in cylinders/heads/sectors */
1368 static int tw_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1369                 sector_t capacity, int geom[])
1370 {
1371         int heads, sectors, cylinders;
1372         TW_Device_Extension *tw_dev;
1373
1374         dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam()\n");
1375         tw_dev = (TW_Device_Extension *)sdev->host->hostdata;
1376
1377         heads = 64;
1378         sectors = 32;
1379         cylinders = sector_div(capacity, heads * sectors);
1380
1381         if (capacity >= 0x200000) {
1382                 heads = 255;
1383                 sectors = 63;
1384                 cylinders = sector_div(capacity, heads * sectors);
1385         }
1386
1387         dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam(): heads = %d, sectors = %d, cylinders = %d\n", heads, sectors, cylinders);
1388         geom[0] = heads;
1389         geom[1] = sectors;
1390         geom[2] = cylinders;
1391
1392         return 0;
1393 } /* End tw_scsi_biosparam() */
1394
1395 /* This is the new scsi eh reset function */
1396 static int tw_scsi_eh_reset(struct scsi_cmnd *SCpnt)
1397 {
1398         TW_Device_Extension *tw_dev=NULL;
1399         int retval = FAILED;
1400
1401         tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
1402
1403         tw_dev->num_resets++;
1404
1405         sdev_printk(KERN_WARNING, SCpnt->device,
1406                 "WARNING: Command (0x%x) timed out, resetting card.\n",
1407                 SCpnt->cmnd[0]);
1408
1409         /* Make sure we are not issuing an ioctl or resetting from ioctl */
1410         mutex_lock(&tw_dev->ioctl_lock);
1411
1412         /* Now reset the card and some of the device extension data */
1413         if (tw_reset_device_extension(tw_dev)) {
1414                 printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no);
1415                 goto out;
1416         }
1417
1418         retval = SUCCESS;
1419 out:
1420         mutex_unlock(&tw_dev->ioctl_lock);
1421         return retval;
1422 } /* End tw_scsi_eh_reset() */
1423
1424 /* This function handles scsi inquiry commands */
1425 static int tw_scsiop_inquiry(TW_Device_Extension *tw_dev, int request_id)
1426 {
1427         TW_Param *param;
1428         TW_Command *command_packet;
1429         unsigned long command_que_value;
1430         unsigned long param_value;
1431
1432         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry()\n");
1433
1434         /* Initialize command packet */
1435         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1436         if (command_packet == NULL) {
1437                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet virtual address.\n");
1438                 return 1;
1439         }
1440         memset(command_packet, 0, sizeof(TW_Sector));
1441         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1442         command_packet->size = 4;
1443         command_packet->request_id = request_id;
1444         command_packet->status = 0;
1445         command_packet->flags = 0;
1446         command_packet->byte6.parameter_count = 1;
1447
1448         /* Now setup the param */
1449         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1450                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment virtual address.\n");
1451                 return 1;
1452         }
1453         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1454         memset(param, 0, sizeof(TW_Sector));
1455         param->table_id = 3;     /* unit summary table */
1456         param->parameter_id = 3; /* unitsstatus parameter */
1457         param->parameter_size_bytes = TW_MAX_UNITS;
1458         param_value = tw_dev->alignment_physical_address[request_id];
1459         if (param_value == 0) {
1460                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment physical address.\n");
1461                 return 1;
1462         }
1463
1464         command_packet->byte8.param.sgl[0].address = param_value;
1465         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1466         command_que_value = tw_dev->command_packet_physical_address[request_id];
1467         if (command_que_value == 0) {
1468                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet physical address.\n");
1469                 return 1;
1470         }
1471
1472         /* Now try to post the command packet */
1473         tw_post_command_packet(tw_dev, request_id);
1474
1475         return 0;
1476 } /* End tw_scsiop_inquiry() */
1477
1478 static void tw_transfer_internal(TW_Device_Extension *tw_dev, int request_id,
1479                                  void *data, unsigned int len)
1480 {
1481         scsi_sg_copy_from_buffer(tw_dev->srb[request_id], data, len);
1482 }
1483
1484 /* This function is called by the isr to complete an inquiry command */
1485 static int tw_scsiop_inquiry_complete(TW_Device_Extension *tw_dev, int request_id)
1486 {
1487         unsigned char *is_unit_present;
1488         unsigned char request_buffer[36];
1489         TW_Param *param;
1490
1491         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry_complete()\n");
1492
1493         memset(request_buffer, 0, sizeof(request_buffer));
1494         request_buffer[0] = TYPE_DISK; /* Peripheral device type */
1495         request_buffer[1] = 0;         /* Device type modifier */
1496         request_buffer[2] = 0;         /* No ansi/iso compliance */
1497         request_buffer[4] = 31;        /* Additional length */
1498         memcpy(&request_buffer[8], "3ware   ", 8);       /* Vendor ID */
1499         sprintf(&request_buffer[16], "Logical Disk %-2d ", tw_dev->srb[request_id]->device->id);
1500         memcpy(&request_buffer[32], TW_DRIVER_VERSION, 3);
1501         tw_transfer_internal(tw_dev, request_id, request_buffer,
1502                              sizeof(request_buffer));
1503
1504         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1505         if (param == NULL) {
1506                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry_complete(): Bad alignment virtual address.\n");
1507                 return 1;
1508         }
1509         is_unit_present = &(param->data[0]);
1510
1511         if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) {
1512                 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1;
1513         } else {
1514                 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0;
1515                 tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16);
1516                 return TW_ISR_DONT_RESULT;
1517         }
1518
1519         return 0;
1520 } /* End tw_scsiop_inquiry_complete() */
1521
1522 /* This function handles scsi mode_sense commands */
1523 static int tw_scsiop_mode_sense(TW_Device_Extension *tw_dev, int request_id)
1524 {
1525         TW_Param *param;
1526         TW_Command *command_packet;
1527         unsigned long command_que_value;
1528         unsigned long param_value;
1529
1530         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense()\n");
1531
1532         /* Only page control = 0, page code = 0x8 (cache page) supported */
1533         if (tw_dev->srb[request_id]->cmnd[2] != 0x8) {
1534                 tw_dev->state[request_id] = TW_S_COMPLETED;
1535                 tw_state_request_finish(tw_dev, request_id);
1536                 tw_dev->srb[request_id]->result = (DID_OK << 16);
1537                 tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1538                 return 0;
1539         }
1540
1541         /* Now read firmware cache setting for this unit */
1542         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1543         if (command_packet == NULL) {
1544                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet virtual address.\n");
1545                 return 1;
1546         }
1547
1548         /* Setup the command packet */
1549         memset(command_packet, 0, sizeof(TW_Sector));
1550         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1551         command_packet->size = 4;
1552         command_packet->request_id = request_id;
1553         command_packet->status = 0;
1554         command_packet->flags = 0;
1555         command_packet->byte6.parameter_count = 1;
1556
1557         /* Setup the param */
1558         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1559                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment virtual address.\n");
1560                 return 1;
1561         }
1562
1563         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1564         memset(param, 0, sizeof(TW_Sector));
1565         param->table_id = TW_UNIT_INFORMATION_TABLE_BASE + tw_dev->srb[request_id]->device->id;
1566         param->parameter_id = 7; /* unit flags */
1567         param->parameter_size_bytes = 1;
1568         param_value = tw_dev->alignment_physical_address[request_id];
1569         if (param_value == 0) {
1570                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment physical address.\n");
1571                 return 1;
1572         }
1573
1574         command_packet->byte8.param.sgl[0].address = param_value;
1575         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1576         command_que_value = tw_dev->command_packet_physical_address[request_id];
1577         if (command_que_value == 0) {
1578                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet physical address.\n");
1579                 return 1;
1580         }
1581
1582         /* Now try to post the command packet */
1583         tw_post_command_packet(tw_dev, request_id);
1584
1585         return 0;
1586 } /* End tw_scsiop_mode_sense() */
1587
1588 /* This function is called by the isr to complete a mode sense command */
1589 static int tw_scsiop_mode_sense_complete(TW_Device_Extension *tw_dev, int request_id)
1590 {
1591         TW_Param *param;
1592         unsigned char *flags;
1593         unsigned char request_buffer[8];
1594
1595         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense_complete()\n");
1596
1597         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1598         if (param == NULL) {
1599                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense_complete(): Bad alignment virtual address.\n");
1600                 return 1;
1601         }
1602         flags = (char *)&(param->data[0]);
1603         memset(request_buffer, 0, sizeof(request_buffer));
1604
1605         request_buffer[0] = 0xf;        /* mode data length */
1606         request_buffer[1] = 0;          /* default medium type */
1607         request_buffer[2] = 0x10;       /* dpo/fua support on */
1608         request_buffer[3] = 0;          /* no block descriptors */
1609         request_buffer[4] = 0x8;        /* caching page */
1610         request_buffer[5] = 0xa;        /* page length */
1611         if (*flags & 0x1)
1612                 request_buffer[6] = 0x5;        /* WCE on, RCD on */
1613         else
1614                 request_buffer[6] = 0x1;        /* WCE off, RCD on */
1615         tw_transfer_internal(tw_dev, request_id, request_buffer,
1616                              sizeof(request_buffer));
1617
1618         return 0;
1619 } /* End tw_scsiop_mode_sense_complete() */
1620
1621 /* This function handles scsi read_capacity commands */
1622 static int tw_scsiop_read_capacity(TW_Device_Extension *tw_dev, int request_id)
1623 {
1624         TW_Param *param;
1625         TW_Command *command_packet;
1626         unsigned long command_que_value;
1627         unsigned long param_value;
1628
1629         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity()\n");
1630
1631         /* Initialize command packet */
1632         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1633
1634         if (command_packet == NULL) {
1635                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet virtual address.\n");
1636                 return 1;
1637         }
1638         memset(command_packet, 0, sizeof(TW_Sector));
1639         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1640         command_packet->size = 4;
1641         command_packet->request_id = request_id;
1642         command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id);
1643         command_packet->status = 0;
1644         command_packet->flags = 0;
1645         command_packet->byte6.block_count = 1;
1646
1647         /* Now setup the param */
1648         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1649                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment virtual address.\n");
1650                 return 1;
1651         }
1652         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1653         memset(param, 0, sizeof(TW_Sector));
1654         param->table_id = TW_UNIT_INFORMATION_TABLE_BASE +
1655         tw_dev->srb[request_id]->device->id;
1656         param->parameter_id = 4;        /* unitcapacity parameter */
1657         param->parameter_size_bytes = 4;
1658         param_value = tw_dev->alignment_physical_address[request_id];
1659         if (param_value == 0) {
1660                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment physical address.\n");
1661                 return 1;
1662         }
1663
1664         command_packet->byte8.param.sgl[0].address = param_value;
1665         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1666         command_que_value = tw_dev->command_packet_physical_address[request_id];
1667         if (command_que_value == 0) {
1668                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet physical address.\n");
1669                 return 1;
1670         }
1671
1672         /* Now try to post the command to the board */
1673         tw_post_command_packet(tw_dev, request_id);
1674
1675         return 0;
1676 } /* End tw_scsiop_read_capacity() */
1677
1678 /* This function is called by the isr to complete a readcapacity command */
1679 static int tw_scsiop_read_capacity_complete(TW_Device_Extension *tw_dev, int request_id)
1680 {
1681         unsigned char *param_data;
1682         u32 capacity;
1683         char buff[8];
1684         TW_Param *param;
1685
1686         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete()\n");
1687
1688         memset(buff, 0, sizeof(buff));
1689         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1690         if (param == NULL) {
1691                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_capacity_complete(): Bad alignment virtual address.\n");
1692                 return 1;
1693         }
1694         param_data = &(param->data[0]);
1695
1696         capacity = (param_data[3] << 24) | (param_data[2] << 16) |
1697                    (param_data[1] << 8) | param_data[0];
1698
1699         /* Subtract one sector to fix get last sector ioctl */
1700         capacity -= 1;
1701
1702         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete(): Capacity = 0x%x.\n", capacity);
1703
1704         /* Number of LBA's */
1705         buff[0] = (capacity >> 24);
1706         buff[1] = (capacity >> 16) & 0xff;
1707         buff[2] = (capacity >> 8) & 0xff;
1708         buff[3] = capacity & 0xff;
1709
1710         /* Block size in bytes (512) */
1711         buff[4] = (TW_BLOCK_SIZE >> 24);
1712         buff[5] = (TW_BLOCK_SIZE >> 16) & 0xff;
1713         buff[6] = (TW_BLOCK_SIZE >> 8) & 0xff;
1714         buff[7] = TW_BLOCK_SIZE & 0xff;
1715
1716         tw_transfer_internal(tw_dev, request_id, buff, sizeof(buff));
1717
1718         return 0;
1719 } /* End tw_scsiop_read_capacity_complete() */
1720
1721 /* This function handles scsi read or write commands */
1722 static int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id)
1723 {
1724         TW_Command *command_packet;
1725         unsigned long command_que_value;
1726         u32 lba = 0x0, num_sectors = 0x0;
1727         int i, use_sg;
1728         struct scsi_cmnd *srb;
1729         struct scatterlist *sglist, *sg;
1730
1731         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write()\n");
1732
1733         srb = tw_dev->srb[request_id];
1734
1735         sglist = scsi_sglist(srb);
1736         if (!sglist) {
1737                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Request buffer NULL.\n");
1738                 return 1;
1739         }
1740
1741         /* Initialize command packet */
1742         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1743         if (command_packet == NULL) {
1744                 dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): Bad command packet virtual address.\n");
1745                 return 1;
1746         }
1747
1748         if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == READ_10) {
1749                 command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_READ);
1750         } else {
1751                 command_packet->opcode__sgloffset = TW_OPSGL_IN(3, TW_OP_WRITE);
1752         }
1753
1754         command_packet->size = 3;
1755         command_packet->request_id = request_id;
1756         command_packet->unit__hostid = TW_UNITHOST_IN(0, srb->device->id);
1757         command_packet->status = 0;
1758         command_packet->flags = 0;
1759
1760         if (srb->cmnd[0] == WRITE_10) {
1761                 if ((srb->cmnd[1] & 0x8) || (srb->cmnd[1] & 0x10))
1762                         command_packet->flags = 1;
1763         }
1764
1765         if (srb->cmnd[0] == READ_6 || srb->cmnd[0] == WRITE_6) {
1766                 lba = ((u32)srb->cmnd[1] << 16) | ((u32)srb->cmnd[2] << 8) | (u32)srb->cmnd[3];
1767                 num_sectors = (u32)srb->cmnd[4];
1768         } else {
1769                 lba = ((u32)srb->cmnd[2] << 24) | ((u32)srb->cmnd[3] << 16) | ((u32)srb->cmnd[4] << 8) | (u32)srb->cmnd[5];
1770                 num_sectors = (u32)srb->cmnd[8] | ((u32)srb->cmnd[7] << 8);
1771         }
1772
1773         /* Update sector statistic */
1774         tw_dev->sector_count = num_sectors;
1775         if (tw_dev->sector_count > tw_dev->max_sector_count)
1776                 tw_dev->max_sector_count = tw_dev->sector_count;
1777
1778         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): lba = 0x%x num_sectors = 0x%x\n", lba, num_sectors);
1779         command_packet->byte8.io.lba = lba;
1780         command_packet->byte6.block_count = num_sectors;
1781
1782         use_sg = tw_map_scsi_sg_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]);
1783         if (!use_sg)
1784                 return 1;
1785
1786         scsi_for_each_sg(tw_dev->srb[request_id], sg, use_sg, i) {
1787                 command_packet->byte8.io.sgl[i].address = sg_dma_address(sg);
1788                 command_packet->byte8.io.sgl[i].length = sg_dma_len(sg);
1789                 command_packet->size+=2;
1790         }
1791
1792         /* Update SG statistics */
1793         tw_dev->sgl_entries = scsi_sg_count(tw_dev->srb[request_id]);
1794         if (tw_dev->sgl_entries > tw_dev->max_sgl_entries)
1795                 tw_dev->max_sgl_entries = tw_dev->sgl_entries;
1796
1797         command_que_value = tw_dev->command_packet_physical_address[request_id];
1798         if (command_que_value == 0) {
1799                 dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Bad command packet physical address.\n");
1800                 return 1;
1801         }
1802
1803         /* Now try to post the command to the board */
1804         tw_post_command_packet(tw_dev, request_id);
1805
1806         return 0;
1807 } /* End tw_scsiop_read_write() */
1808
1809 /* This function will handle the request sense scsi command */
1810 static int tw_scsiop_request_sense(TW_Device_Extension *tw_dev, int request_id)
1811 {
1812         char request_buffer[18];
1813
1814         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_request_sense()\n");
1815
1816         memset(request_buffer, 0, sizeof(request_buffer));
1817         request_buffer[0] = 0x70; /* Immediate fixed format */
1818         request_buffer[7] = 10; /* minimum size per SPC: 18 bytes */
1819         /* leave all other fields zero, giving effectively NO_SENSE return */
1820         tw_transfer_internal(tw_dev, request_id, request_buffer,
1821                              sizeof(request_buffer));
1822
1823         tw_dev->state[request_id] = TW_S_COMPLETED;
1824         tw_state_request_finish(tw_dev, request_id);
1825
1826         /* If we got a request_sense, we probably want a reset, return error */
1827         tw_dev->srb[request_id]->result = (DID_ERROR << 16);
1828         tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
1829
1830         return 0;
1831 } /* End tw_scsiop_request_sense() */
1832
1833 /* This function will handle synchronize cache scsi command */
1834 static int tw_scsiop_synchronize_cache(TW_Device_Extension *tw_dev, int request_id)
1835 {
1836         TW_Command *command_packet;
1837         unsigned long command_que_value;
1838
1839         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_synchronize_cache()\n");
1840
1841         /* Send firmware flush command for this unit */
1842         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1843         if (command_packet == NULL) {
1844                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet virtual address.\n");
1845                 return 1;
1846         }
1847
1848         /* Setup the command packet */
1849         memset(command_packet, 0, sizeof(TW_Sector));
1850         command_packet->opcode__sgloffset = TW_OPSGL_IN(0, TW_OP_FLUSH_CACHE);
1851         command_packet->size = 2;
1852         command_packet->request_id = request_id;
1853         command_packet->unit__hostid = TW_UNITHOST_IN(0, tw_dev->srb[request_id]->device->id);
1854         command_packet->status = 0;
1855         command_packet->flags = 0;
1856         command_packet->byte6.parameter_count = 1;
1857         command_que_value = tw_dev->command_packet_physical_address[request_id];
1858         if (command_que_value == 0) {
1859                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet physical address.\n");
1860                 return 1;
1861         }
1862
1863         /* Now try to post the command packet */
1864         tw_post_command_packet(tw_dev, request_id);
1865
1866         return 0;
1867 } /* End tw_scsiop_synchronize_cache() */
1868
1869 /* This function will handle test unit ready scsi command */
1870 static int tw_scsiop_test_unit_ready(TW_Device_Extension *tw_dev, int request_id)
1871 {
1872         TW_Param *param;
1873         TW_Command *command_packet;
1874         unsigned long command_que_value;
1875         unsigned long param_value;
1876
1877         dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_test_unit_ready()\n");
1878
1879         /* Initialize command packet */
1880         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
1881         if (command_packet == NULL) {
1882                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet virtual address.\n");
1883                 return 1;
1884         }
1885         memset(command_packet, 0, sizeof(TW_Sector));
1886         command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
1887         command_packet->size = 4;
1888         command_packet->request_id = request_id;
1889         command_packet->status = 0;
1890         command_packet->flags = 0;
1891         command_packet->byte6.parameter_count = 1;
1892
1893         /* Now setup the param */
1894         if (tw_dev->alignment_virtual_address[request_id] == NULL) {
1895                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment virtual address.\n");
1896                 return 1;
1897         }
1898         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1899         memset(param, 0, sizeof(TW_Sector));
1900         param->table_id = 3;     /* unit summary table */
1901         param->parameter_id = 3; /* unitsstatus parameter */
1902         param->parameter_size_bytes = TW_MAX_UNITS;
1903         param_value = tw_dev->alignment_physical_address[request_id];
1904         if (param_value == 0) {
1905                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment physical address.\n");
1906                 return 1;
1907         }
1908
1909         command_packet->byte8.param.sgl[0].address = param_value;
1910         command_packet->byte8.param.sgl[0].length = sizeof(TW_Sector);
1911         command_que_value = tw_dev->command_packet_physical_address[request_id];
1912         if (command_que_value == 0) {
1913                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet physical address.\n");
1914                 return 1;
1915         }
1916
1917         /* Now try to post the command packet */
1918         tw_post_command_packet(tw_dev, request_id);
1919
1920         return 0;
1921 } /* End tw_scsiop_test_unit_ready() */
1922
1923 /* This function is called by the isr to complete a testunitready command */
1924 static int tw_scsiop_test_unit_ready_complete(TW_Device_Extension *tw_dev, int request_id)
1925 {
1926         unsigned char *is_unit_present;
1927         TW_Param *param;
1928
1929         dprintk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete()\n");
1930
1931         param = (TW_Param *)tw_dev->alignment_virtual_address[request_id];
1932         if (param == NULL) {
1933                 printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete(): Bad alignment virtual address.\n");
1934                 return 1;
1935         }
1936         is_unit_present = &(param->data[0]);
1937
1938         if (is_unit_present[tw_dev->srb[request_id]->device->id] & TW_UNIT_ONLINE) {
1939                 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 1;
1940         } else {
1941                 tw_dev->is_unit_present[tw_dev->srb[request_id]->device->id] = 0;
1942                 tw_dev->srb[request_id]->result = (DID_BAD_TARGET << 16);
1943                 return TW_ISR_DONT_RESULT;
1944         }
1945
1946         return 0;
1947 } /* End tw_scsiop_test_unit_ready_complete() */
1948
1949 /* This is the main scsi queue function to handle scsi opcodes */
1950 static int tw_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
1951 {
1952         unsigned char *command = SCpnt->cmnd;
1953         int request_id = 0;
1954         int retval = 1;
1955         TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
1956
1957         /* If we are resetting due to timed out ioctl, report as busy */
1958         if (test_bit(TW_IN_RESET, &tw_dev->flags))
1959                 return SCSI_MLQUEUE_HOST_BUSY;
1960
1961         /* Save done function into Scsi_Cmnd struct */
1962         SCpnt->scsi_done = done;
1963
1964         /* Queue the command and get a request id */
1965         tw_state_request_start(tw_dev, &request_id);
1966
1967         /* Save the scsi command for use by the ISR */
1968         tw_dev->srb[request_id] = SCpnt;
1969
1970         /* Initialize phase to zero */
1971         SCpnt->SCp.phase = TW_PHASE_INITIAL;
1972
1973         switch (*command) {
1974                 case READ_10:
1975                 case READ_6:
1976                 case WRITE_10:
1977                 case WRITE_6:
1978                         dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ/WRITE.\n");
1979                         retval = tw_scsiop_read_write(tw_dev, request_id);
1980                         break;
1981                 case TEST_UNIT_READY:
1982                         dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught TEST_UNIT_READY.\n");
1983                         retval = tw_scsiop_test_unit_ready(tw_dev, request_id);
1984                         break;
1985                 case INQUIRY:
1986                         dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught INQUIRY.\n");
1987                         retval = tw_scsiop_inquiry(tw_dev, request_id);
1988                         break;
1989                 case READ_CAPACITY:
1990                         dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ_CAPACITY.\n");
1991                         retval = tw_scsiop_read_capacity(tw_dev, request_id);
1992                         break;
1993                 case REQUEST_SENSE:
1994                         dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught REQUEST_SENSE.\n");
1995                         retval = tw_scsiop_request_sense(tw_dev, request_id);
1996                         break;
1997                 case MODE_SENSE:
1998                         dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught MODE_SENSE.\n");
1999                         retval = tw_scsiop_mode_sense(tw_dev, request_id);
2000                         break;
2001                 case SYNCHRONIZE_CACHE:
2002                         dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught SYNCHRONIZE_CACHE.\n");
2003                         retval = tw_scsiop_synchronize_cache(tw_dev, request_id);
2004                         break;
2005                 case TW_IOCTL:
2006                         printk(KERN_WARNING "3w-xxxx: SCSI_IOCTL_SEND_COMMAND deprecated, please update your 3ware tools.\n");
2007                         break;
2008                 default:
2009                         printk(KERN_NOTICE "3w-xxxx: scsi%d: Unknown scsi opcode: 0x%x\n", tw_dev->host->host_no, *command);
2010                         tw_dev->state[request_id] = TW_S_COMPLETED;
2011                         tw_state_request_finish(tw_dev, request_id);
2012                         SCpnt->result = (DID_BAD_TARGET << 16);
2013                         done(SCpnt);
2014                         retval = 0;
2015         }
2016         if (retval) {
2017                 tw_dev->state[request_id] = TW_S_COMPLETED;
2018                 tw_state_request_finish(tw_dev, request_id);
2019                 SCpnt->result = (DID_ERROR << 16);
2020                 done(SCpnt);
2021                 retval = 0;
2022         }
2023         return retval;
2024 } /* End tw_scsi_queue() */
2025
2026 /* This function is the interrupt service routine */
2027 static irqreturn_t tw_interrupt(int irq, void *dev_instance)
2028 {
2029         int request_id;
2030         u32 status_reg_value;
2031         TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance;
2032         TW_Response_Queue response_que;
2033         int error = 0, retval = 0;
2034         TW_Command *command_packet;
2035         int handled = 0;
2036
2037         /* Get the host lock for io completions */
2038         spin_lock(tw_dev->host->host_lock);
2039
2040         /* Read the registers */
2041         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
2042
2043         /* Check if this is our interrupt, otherwise bail */
2044         if (!(status_reg_value & TW_STATUS_VALID_INTERRUPT))
2045                 goto tw_interrupt_bail;
2046
2047         handled = 1;
2048
2049         /* If we are resetting, bail */
2050         if (test_bit(TW_IN_RESET, &tw_dev->flags))
2051                 goto tw_interrupt_bail;
2052
2053         /* Check controller for errors */
2054         if (tw_check_bits(status_reg_value)) {
2055                 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
2056                 if (tw_decode_bits(tw_dev, status_reg_value, 1)) {
2057                         TW_CLEAR_ALL_INTERRUPTS(tw_dev);
2058                         goto tw_interrupt_bail;
2059                 }
2060         }
2061
2062         /* Handle host interrupt */
2063         if (status_reg_value & TW_STATUS_HOST_INTERRUPT) {
2064                 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received host interrupt.\n");
2065                 TW_CLEAR_HOST_INTERRUPT(tw_dev);
2066         }
2067
2068         /* Handle attention interrupt */
2069         if (status_reg_value & TW_STATUS_ATTENTION_INTERRUPT) {
2070                 dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received attention interrupt.\n");
2071                 TW_CLEAR_ATTENTION_INTERRUPT(tw_dev);
2072                 tw_state_request_start(tw_dev, &request_id);
2073                 error = tw_aen_read_queue(tw_dev, request_id);
2074                 if (error) {
2075                         printk(KERN_WARNING "3w-xxxx: scsi%d: Error reading aen queue.\n", tw_dev->host->host_no);
2076                         tw_dev->state[request_id] = TW_S_COMPLETED;
2077                         tw_state_request_finish(tw_dev, request_id);
2078                 }
2079         }
2080
2081         /* Handle command interrupt */
2082         if (status_reg_value & TW_STATUS_COMMAND_INTERRUPT) {
2083                 /* Drain as many pending commands as we can */
2084                 while (tw_dev->pending_request_count > 0) {
2085                         request_id = tw_dev->pending_queue[tw_dev->pending_head];
2086                         if (tw_dev->state[request_id] != TW_S_PENDING) {
2087                                 printk(KERN_WARNING "3w-xxxx: scsi%d: Found request id that wasn't pending.\n", tw_dev->host->host_no);
2088                                 break;
2089                         }
2090                         if (tw_post_command_packet(tw_dev, request_id)==0) {
2091                                 if (tw_dev->pending_head == TW_Q_LENGTH-1) {
2092                                         tw_dev->pending_head = TW_Q_START;
2093                                 } else {
2094                                         tw_dev->pending_head = tw_dev->pending_head + 1;
2095                                 }
2096                                 tw_dev->pending_request_count--;
2097                         } else {
2098                                 /* If we get here, we will continue re-posting on the next command interrupt */
2099                                 break;
2100                         }
2101                 }
2102                 /* If there are no more pending requests, we mask command interrupt */
2103                 if (tw_dev->pending_request_count == 0)
2104                         TW_MASK_COMMAND_INTERRUPT(tw_dev);
2105         }
2106
2107         /* Handle response interrupt */
2108         if (status_reg_value & TW_STATUS_RESPONSE_INTERRUPT) {
2109                 /* Drain the response queue from the board */
2110                 while ((status_reg_value & TW_STATUS_RESPONSE_QUEUE_EMPTY) == 0) {
2111                         /* Read response queue register */
2112                         response_que.value = inl(TW_RESPONSE_QUEUE_REG_ADDR(tw_dev));
2113                         request_id = TW_RESID_OUT(response_que.response_id);
2114                         command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
2115                         error = 0;
2116
2117                         /* Check for bad response */
2118                         if (command_packet->status != 0) {
2119                                 /* If internal command, don't error, don't fill sense */
2120                                 if (tw_dev->srb[request_id] == NULL) {
2121                                         tw_decode_sense(tw_dev, request_id, 0);
2122                                 } else {
2123                                         error = tw_decode_sense(tw_dev, request_id, 1);
2124                                 }
2125                         }
2126
2127                         /* Check for correct state */
2128                         if (tw_dev->state[request_id] != TW_S_POSTED) {
2129                                 if (tw_dev->srb[request_id] != NULL) {
2130                                         printk(KERN_WARNING "3w-xxxx: scsi%d: Received a request id that wasn't posted.\n", tw_dev->host->host_no);
2131                                         error = 1;
2132                                 }
2133                         }
2134
2135                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Response queue request id: %d.\n", request_id);
2136
2137                         /* Check for internal command completion */
2138                         if (tw_dev->srb[request_id] == NULL) {
2139                                 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Found internally posted command.\n");
2140                                 /* Check for chrdev ioctl completion */
2141                                 if (request_id != tw_dev->chrdev_request_id) {
2142                                         retval = tw_aen_complete(tw_dev, request_id);
2143                                         if (retval) {
2144                                                 printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing aen.\n", tw_dev->host->host_no);
2145                                         }
2146                                 } else {
2147                                         tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
2148                                         wake_up(&tw_dev->ioctl_wqueue);
2149                                 }
2150                         } else {
2151                                 switch (tw_dev->srb[request_id]->cmnd[0]) {
2152                                 case READ_10:
2153                                 case READ_6:
2154                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_10/READ_6\n");
2155                                         break;
2156                                 case WRITE_10:
2157                                 case WRITE_6:
2158                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught WRITE_10/WRITE_6\n");
2159                                         break;
2160                                 case TEST_UNIT_READY:
2161                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught TEST_UNIT_READY\n");
2162                                         error = tw_scsiop_test_unit_ready_complete(tw_dev, request_id);
2163                                         break;
2164                                 case INQUIRY:
2165                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught INQUIRY\n");
2166                                         error = tw_scsiop_inquiry_complete(tw_dev, request_id);
2167                                         break;
2168                                 case READ_CAPACITY:
2169                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_CAPACITY\n");
2170                                         error = tw_scsiop_read_capacity_complete(tw_dev, request_id);
2171                                         break;
2172                                 case MODE_SENSE:
2173                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught MODE_SENSE\n");
2174                                         error = tw_scsiop_mode_sense_complete(tw_dev, request_id);
2175                                         break;
2176                                 case SYNCHRONIZE_CACHE:
2177                                         dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught SYNCHRONIZE_CACHE\n");
2178                                         break;
2179                                 default:
2180                                         printk(KERN_WARNING "3w-xxxx: case slip in tw_interrupt()\n");
2181                                         error = 1;
2182                                 }
2183
2184                                 /* If no error command was a success */
2185                                 if (error == 0) {
2186                                         tw_dev->srb[request_id]->result = (DID_OK << 16);
2187                                 }
2188
2189                                 /* If error, command failed */
2190                                 if (error == 1) {
2191                                         /* Ask for a host reset */
2192                                         tw_dev->srb[request_id]->result = (DID_OK << 16) | (CHECK_CONDITION << 1);
2193                                 }
2194
2195                                 /* Now complete the io */
2196                                 if ((error != TW_ISR_DONT_COMPLETE)) {
2197                                         tw_dev->state[request_id] = TW_S_COMPLETED;
2198                                         tw_state_request_finish(tw_dev, request_id);
2199                                         tw_dev->posted_request_count--;
2200                                         tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
2201
2202                                         tw_unmap_scsi_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]);
2203                                 }
2204                         }
2205
2206                         /* Check for valid status after each drain */
2207                         status_reg_value = inl(TW_STATUS_REG_ADDR(tw_dev));
2208                         if (tw_check_bits(status_reg_value)) {
2209                                 dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
2210                                 if (tw_decode_bits(tw_dev, status_reg_value, 1)) {
2211                                         TW_CLEAR_ALL_INTERRUPTS(tw_dev);
2212                                         goto tw_interrupt_bail;
2213                                 }
2214                         }
2215                 }
2216         }
2217
2218 tw_interrupt_bail:
2219         spin_unlock(tw_dev->host->host_lock);
2220         return IRQ_RETVAL(handled);
2221 } /* End tw_interrupt() */
2222
2223 /* This function tells the controller to shut down */
2224 static void __tw_shutdown(TW_Device_Extension *tw_dev)
2225 {
2226         /* Disable interrupts */
2227         TW_DISABLE_INTERRUPTS(tw_dev);
2228
2229         /* Free up the IRQ */
2230         free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
2231
2232         printk(KERN_WARNING "3w-xxxx: Shutting down host %d.\n", tw_dev->host->host_no);
2233
2234         /* Tell the card we are shutting down */
2235         if (tw_initconnection(tw_dev, 1)) {
2236                 printk(KERN_WARNING "3w-xxxx: Connection shutdown failed.\n");
2237         } else {
2238                 printk(KERN_WARNING "3w-xxxx: Shutdown complete.\n");
2239         }
2240
2241         /* Clear all interrupts just before exit */
2242         TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
2243 } /* End __tw_shutdown() */
2244
2245 /* Wrapper for __tw_shutdown */
2246 static void tw_shutdown(struct pci_dev *pdev)
2247 {
2248         struct Scsi_Host *host = pci_get_drvdata(pdev);
2249         TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
2250
2251         __tw_shutdown(tw_dev);
2252 } /* End tw_shutdown() */
2253
2254 /* This function gets called when a disk is coming online */
2255 static int tw_slave_configure(struct scsi_device *sdev)
2256 {
2257         /* Force 60 second timeout */
2258         blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
2259
2260         return 0;
2261 } /* End tw_slave_configure() */
2262
2263 static struct scsi_host_template driver_template = {
2264         .module                 = THIS_MODULE,
2265         .name                   = "3ware Storage Controller",
2266         .queuecommand           = tw_scsi_queue,
2267         .eh_host_reset_handler  = tw_scsi_eh_reset,
2268         .bios_param             = tw_scsi_biosparam,
2269         .change_queue_depth     = tw_change_queue_depth,
2270         .can_queue              = TW_Q_LENGTH-2,
2271         .slave_configure        = tw_slave_configure,
2272         .this_id                = -1,
2273         .sg_tablesize           = TW_MAX_SGL_LENGTH,
2274         .max_sectors            = TW_MAX_SECTORS,
2275         .cmd_per_lun            = TW_MAX_CMDS_PER_LUN,
2276         .use_clustering         = ENABLE_CLUSTERING,
2277         .shost_attrs            = tw_host_attrs,
2278         .emulated               = 1
2279 };
2280
2281 /* This function will probe and initialize a card */
2282 static int __devinit tw_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
2283 {
2284         struct Scsi_Host *host = NULL;
2285         TW_Device_Extension *tw_dev;
2286         int retval = -ENODEV;
2287
2288         retval = pci_enable_device(pdev);
2289         if (retval) {
2290                 printk(KERN_WARNING "3w-xxxx: Failed to enable pci device.");
2291                 goto out_disable_device;
2292         }
2293
2294         pci_set_master(pdev);
2295
2296         retval = pci_set_dma_mask(pdev, TW_DMA_MASK);
2297         if (retval) {
2298                 printk(KERN_WARNING "3w-xxxx: Failed to set dma mask.");
2299                 goto out_disable_device;
2300         }
2301
2302         host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension));
2303         if (!host) {
2304                 printk(KERN_WARNING "3w-xxxx: Failed to allocate memory for device extension.");
2305                 retval = -ENOMEM;
2306                 goto out_disable_device;
2307         }
2308         tw_dev = (TW_Device_Extension *)host->hostdata;
2309
2310         /* Save values to device extension */
2311         tw_dev->host = host;
2312         tw_dev->tw_pci_dev = pdev;
2313
2314         if (tw_initialize_device_extension(tw_dev)) {
2315                 printk(KERN_WARNING "3w-xxxx: Failed to initialize device extension.");
2316                 goto out_free_device_extension;
2317         }
2318
2319         /* Request IO regions */
2320         retval = pci_request_regions(pdev, "3w-xxxx");
2321         if (retval) {
2322                 printk(KERN_WARNING "3w-xxxx: Failed to get mem region.");
2323                 goto out_free_device_extension;
2324         }
2325
2326         /* Save base address */
2327         tw_dev->base_addr = pci_resource_start(pdev, 0);
2328         if (!tw_dev->base_addr) {
2329                 printk(KERN_WARNING "3w-xxxx: Failed to get io address.");
2330                 goto out_release_mem_region;
2331         }
2332
2333         /* Disable interrupts on the card */
2334         TW_DISABLE_INTERRUPTS(tw_dev);
2335
2336         /* Initialize the card */
2337         if (tw_reset_sequence(tw_dev))
2338                 goto out_release_mem_region;
2339
2340         /* Set host specific parameters */
2341         host->max_id = TW_MAX_UNITS;
2342         host->max_cmd_len = TW_MAX_CDB_LEN;
2343
2344         /* Luns and channels aren't supported by adapter */
2345         host->max_lun = 0;
2346         host->max_channel = 0;
2347
2348         /* Register the card with the kernel SCSI layer */
2349         retval = scsi_add_host(host, &pdev->dev);
2350         if (retval) {
2351                 printk(KERN_WARNING "3w-xxxx: scsi add host failed");
2352                 goto out_release_mem_region;
2353         }
2354
2355         pci_set_drvdata(pdev, host);
2356
2357         printk(KERN_WARNING "3w-xxxx: scsi%d: Found a 3ware Storage Controller at 0x%x, IRQ: %d.\n", host->host_no, tw_dev->base_addr, pdev->irq);
2358
2359         /* Now setup the interrupt handler */
2360         retval = request_irq(pdev->irq, tw_interrupt, IRQF_SHARED, "3w-xxxx", tw_dev);
2361         if (retval) {
2362                 printk(KERN_WARNING "3w-xxxx: Error requesting IRQ.");
2363                 goto out_remove_host;
2364         }
2365
2366         tw_device_extension_list[tw_device_extension_count] = tw_dev;
2367         tw_device_extension_count++;
2368
2369         /* Re-enable interrupts on the card */
2370         TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
2371
2372         /* Finally, scan the host */
2373         scsi_scan_host(host);
2374
2375         if (twe_major == -1) {
2376                 if ((twe_major = register_chrdev (0, "twe", &tw_fops)) < 0)
2377                         printk(KERN_WARNING "3w-xxxx: Failed to register character device.");
2378         }
2379         return 0;
2380
2381 out_remove_host:
2382         scsi_remove_host(host);
2383 out_release_mem_region:
2384         pci_release_regions(pdev);
2385 out_free_device_extension:
2386         tw_free_device_extension(tw_dev);
2387         scsi_host_put(host);
2388 out_disable_device:
2389         pci_disable_device(pdev);
2390
2391         return retval;
2392 } /* End tw_probe() */
2393
2394 /* This function is called to remove a device */
2395 static void tw_remove(struct pci_dev *pdev)
2396 {
2397         struct Scsi_Host *host = pci_get_drvdata(pdev);
2398         TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
2399
2400         scsi_remove_host(tw_dev->host);
2401
2402         /* Unregister character device */
2403         if (twe_major >= 0) {
2404                 unregister_chrdev(twe_major, "twe");
2405                 twe_major = -1;
2406         }
2407
2408         /* Shutdown the card */
2409         __tw_shutdown(tw_dev);
2410
2411         /* Free up the mem region */
2412         pci_release_regions(pdev);
2413
2414         /* Free up device extension resources */
2415         tw_free_device_extension(tw_dev);
2416
2417         scsi_host_put(tw_dev->host);
2418         pci_disable_device(pdev);
2419         tw_device_extension_count--;
2420 } /* End tw_remove() */
2421
2422 /* PCI Devices supported by this driver */
2423 static struct pci_device_id tw_pci_tbl[] __devinitdata = {
2424         { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_1000,
2425           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2426         { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_7000,
2427           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2428         { }
2429 };
2430 MODULE_DEVICE_TABLE(pci, tw_pci_tbl);
2431
2432 /* pci_driver initializer */
2433 static struct pci_driver tw_driver = {
2434         .name           = "3w-xxxx",
2435         .id_table       = tw_pci_tbl,
2436         .probe          = tw_probe,
2437         .remove         = tw_remove,
2438         .shutdown       = tw_shutdown,
2439 };
2440
2441 /* This function is called on driver initialization */
2442 static int __init tw_init(void)
2443 {
2444         printk(KERN_WARNING "3ware Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
2445
2446         return pci_register_driver(&tw_driver);
2447 } /* End tw_init() */
2448
2449 /* This function is called on driver exit */
2450 static void __exit tw_exit(void)
2451 {
2452         pci_unregister_driver(&tw_driver);
2453 } /* End tw_exit() */
2454
2455 module_init(tw_init);
2456 module_exit(tw_exit);
2457