drivers/net/wireless/rt2x00/rt2800lib.c

   1 /*
   2         Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
   3         Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
   4         Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
   5         Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com>
   6
   7         Based on the original rt2800pci.c and rt2800usb.c.
   8           Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
   9           Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
  10           Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
  11           Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
  12           Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
  13           Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
  14           <http://rt2x00.serialmonkey.com>
  15
  16         This program is free software; you can redistribute it and/or modify
  17         it under the terms of the GNU General Public License as published by
  18         the Free Software Foundation; either version 2 of the License, or
  19         (at your option) any later version.
  20
  21         This program is distributed in the hope that it will be useful,
  22         but WITHOUT ANY WARRANTY; without even the implied warranty of
  23         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  24         GNU General Public License for more details.
  25
  26         You should have received a copy of the GNU General Public License
  27         along with this program; if not, write to the
  28         Free Software Foundation, Inc.,
  29         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  30  */
  31
  32 /*
  33         Module: rt2800lib
  34         Abstract: rt2800 generic device routines.
  35  */
  36
  37 #include <linux/crc-ccitt.h>
  38 #include <linux/kernel.h>
  39 #include <linux/module.h>
  40 #include <linux/slab.h>
  41
  42 #include "rt2x00.h"
  43 #include "rt2800lib.h"
  44 #include "rt2800.h"
  45
  46 /*
  47  * Register access.
  48  * All access to the CSR registers will go through the methods
  49  * rt2800_register_read and rt2800_register_write.
  50  * BBP and RF register require indirect register access,
  51  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  52  * These indirect registers work with busy bits,
  53  * and we will try maximal REGISTER_BUSY_COUNT times to access
  54  * the register while taking a REGISTER_BUSY_DELAY us delay
  55  * between each attampt. When the busy bit is still set at that time,
  56  * the access attempt is considered to have failed,
  57  * and we will print an error.
  58  * The _lock versions must be used if you already hold the csr_mutex
  59  */
  60 #define WAIT_FOR_BBP(__dev, __reg) \
  61         rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
  62 #define WAIT_FOR_RFCSR(__dev, __reg) \
  63         rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
  64 #define WAIT_FOR_RF(__dev, __reg) \
  65         rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
  66 #define WAIT_FOR_MCU(__dev, __reg) \
  67         rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \
  68                             H2M_MAILBOX_CSR_OWNER, (__reg))
  69
  70 static inline bool rt2800_is_305x_soc(struct rt2x00_dev *rt2x00dev)
  71 {
  72         /* check for rt2872 on SoC */
  73         if (!rt2x00_is_soc(rt2x00dev) ||
  74             !rt2x00_rt(rt2x00dev, RT2872))
  75                 return false;
  76
  77         /* we know for sure that these rf chipsets are used on rt305x boards */
  78         if (rt2x00_rf(rt2x00dev, RF3020) ||
  79             rt2x00_rf(rt2x00dev, RF3021) ||
  80             rt2x00_rf(rt2x00dev, RF3022))
  81                 return true;
  82
  83         NOTICE(rt2x00dev, "Unknown RF chipset on rt305x\n");
  84         return false;
  85 }
  86
  87 static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
  88                              const unsigned int word, const u8 value)
  89 {
  90         u32 reg;
  91
  92         mutex_lock(&rt2x00dev->csr_mutex);
  93
  94         /*
  95          * Wait until the BBP becomes available, afterwards we
  96          * can safely write the new data into the register.
  97          */
  98         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
  99                 reg = 0;
 100                 rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
 101                 rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
 102                 rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
 103                 rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
 104                 rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
 105
 106                 rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
 107         }
 108
 109         mutex_unlock(&rt2x00dev->csr_mutex);
 110 }
 111
 112 static void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev,
 113                             const unsigned int word, u8 *value)
 114 {
 115         u32 reg;
 116
 117         mutex_lock(&rt2x00dev->csr_mutex);
 118
 119         /*
 120          * Wait until the BBP becomes available, afterwards we
 121          * can safely write the read request into the register.
 122          * After the data has been written, we wait until hardware
 123          * returns the correct value, if at any time the register
 124          * doesn't become available in time, reg will be 0xffffffff
 125          * which means we return 0xff to the caller.
 126          */
 127         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 128                 reg = 0;
 129                 rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
 130                 rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
 131                 rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
 132                 rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
 133
 134                 rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
 135
 136                 WAIT_FOR_BBP(rt2x00dev, &reg);
 137         }
 138
 139         *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
 140
 141         mutex_unlock(&rt2x00dev->csr_mutex);
 142 }
 143
 144 static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev,
 145                                const unsigned int word, const u8 value)
 146 {
 147         u32 reg;
 148
 149         mutex_lock(&rt2x00dev->csr_mutex);
 150
 151         /*
 152          * Wait until the RFCSR becomes available, afterwards we
 153          * can safely write the new data into the register.
 154          */
 155         if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
 156                 reg = 0;
 157                 rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
 158                 rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
 159                 rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
 160                 rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
 161
 162                 rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
 163         }
 164
 165         mutex_unlock(&rt2x00dev->csr_mutex);
 166 }
 167
 168 static void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
 169                               const unsigned int word, u8 *value)
 170 {
 171         u32 reg;
 172
 173         mutex_lock(&rt2x00dev->csr_mutex);
 174
 175         /*
 176          * Wait until the RFCSR becomes available, afterwards we
 177          * can safely write the read request into the register.
 178          * After the data has been written, we wait until hardware
 179          * returns the correct value, if at any time the register
 180          * doesn't become available in time, reg will be 0xffffffff
 181          * which means we return 0xff to the caller.
 182          */
 183         if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
 184                 reg = 0;
 185                 rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
 186                 rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
 187                 rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
 188
 189                 rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
 190
 191                 WAIT_FOR_RFCSR(rt2x00dev, &reg);
 192         }
 193
 194         *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
 195
 196         mutex_unlock(&rt2x00dev->csr_mutex);
 197 }
 198
 199 static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
 200                             const unsigned int word, const u32 value)
 201 {
 202         u32 reg;
 203
 204         mutex_lock(&rt2x00dev->csr_mutex);
 205
 206         /*
 207          * Wait until the RF becomes available, afterwards we
 208          * can safely write the new data into the register.
 209          */
 210         if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 211                 reg = 0;
 212                 rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
 213                 rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
 214                 rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
 215                 rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
 216
 217                 rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
 218                 rt2x00_rf_write(rt2x00dev, word, value);
 219         }
 220
 221         mutex_unlock(&rt2x00dev->csr_mutex);
 222 }
 223
 224 void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 225                         const u8 command, const u8 token,
 226                         const u8 arg0, const u8 arg1)
 227 {
 228         u32 reg;
 229
 230         /*
 231          * SOC devices don't support MCU requests.
 232          */
 233         if (rt2x00_is_soc(rt2x00dev))
 234                 return;
 235
 236         mutex_lock(&rt2x00dev->csr_mutex);
 237
 238         /*
 239          * Wait until the MCU becomes available, afterwards we
 240          * can safely write the new data into the register.
 241          */
 242         if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
 243                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
 244                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
 245                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
 246                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
 247                 rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
 248
 249                 reg = 0;
 250                 rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
 251                 rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
 252         }
 253
 254         mutex_unlock(&rt2x00dev->csr_mutex);
 255 }
 256 EXPORT_SYMBOL_GPL(rt2800_mcu_request);
 257
 258 int rt2800_wait_csr_ready(struct rt2x00_dev *rt2x00dev)
 259 {
 260         unsigned int i = 0;
 261         u32 reg;
 262
 263         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 264                 rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
 265                 if (reg && reg != ~0)
 266                         return 0;
 267                 msleep(1);
 268         }
 269
 270         ERROR(rt2x00dev, "Unstable hardware.\n");
 271         return -EBUSY;
 272 }
 273 EXPORT_SYMBOL_GPL(rt2800_wait_csr_ready);
 274
 275 int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
 276 {
 277         unsigned int i;
 278         u32 reg;
 279
 280         /*
 281          * Some devices are really slow to respond here. Wait a whole second
 282          * before timing out.
 283          */
 284         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 285                 rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 286                 if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
 287                     !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
 288                         return 0;
 289
 290                 msleep(10);
 291         }
 292
 293         ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
 294         return -EACCES;
 295 }
 296 EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready);
 297
 298 static bool rt2800_check_firmware_crc(const u8 *data, const size_t len)
 299 {
 300         u16 fw_crc;
 301         u16 crc;
 302
 303         /*
 304          * The last 2 bytes in the firmware array are the crc checksum itself,
 305          * this means that we should never pass those 2 bytes to the crc
 306          * algorithm.
 307          */
 308         fw_crc = (data[len - 2] << 8 | data[len - 1]);
 309
 310         /*
 311          * Use the crc ccitt algorithm.
 312          * This will return the same value as the legacy driver which
 313          * used bit ordering reversion on the both the firmware bytes
 314          * before input input as well as on the final output.
 315          * Obviously using crc ccitt directly is much more efficient.
 316          */
 317         crc = crc_ccitt(~0, data, len - 2);
 318
 319         /*
 320          * There is a small difference between the crc-itu-t + bitrev and
 321          * the crc-ccitt crc calculation. In the latter method the 2 bytes
 322          * will be swapped, use swab16 to convert the crc to the correct
 323          * value.
 324          */
 325         crc = swab16(crc);
 326
 327         return fw_crc == crc;
 328 }
 329
 330 int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
 331                           const u8 *data, const size_t len)
 332 {
 333         size_t offset = 0;
 334         size_t fw_len;
 335         bool multiple;
 336
 337         /*
 338          * PCI(e) & SOC devices require firmware with a length
 339          * of 8kb. USB devices require firmware files with a length
 340          * of 4kb. Certain USB chipsets however require different firmware,
 341          * which Ralink only provides attached to the original firmware
 342          * file. Thus for USB devices, firmware files have a length
 343          * which is a multiple of 4kb.
 344          */
 345         if (rt2x00_is_usb(rt2x00dev)) {
 346                 fw_len = 4096;
 347                 multiple = true;
 348         } else {
 349                 fw_len = 8192;
 350                 multiple = true;
 351         }
 352
 353         /*
 354          * Validate the firmware length
 355          */
 356         if (len != fw_len && (!multiple || (len % fw_len) != 0))
 357                 return FW_BAD_LENGTH;
 358
 359         /*
 360          * Check if the chipset requires one of the upper parts
 361          * of the firmware.
 362          */
 363         if (rt2x00_is_usb(rt2x00dev) &&
 364             !rt2x00_rt(rt2x00dev, RT2860) &&
 365             !rt2x00_rt(rt2x00dev, RT2872) &&
 366             !rt2x00_rt(rt2x00dev, RT3070) &&
 367             ((len / fw_len) == 1))
 368                 return FW_BAD_VERSION;
 369
 370         /*
 371          * 8kb firmware files must be checked as if it were
 372          * 2 separate firmware files.
 373          */
 374         while (offset < len) {
 375                 if (!rt2800_check_firmware_crc(data + offset, fw_len))
 376                         return FW_BAD_CRC;
 377
 378                 offset += fw_len;
 379         }
 380
 381         return FW_OK;
 382 }
 383 EXPORT_SYMBOL_GPL(rt2800_check_firmware);
 384
 385 int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
 386                          const u8 *data, const size_t len)
 387 {
 388         unsigned int i;
 389         u32 reg;
 390
 391         /*
 392          * If driver doesn't wake up firmware here,
 393          * rt2800_load_firmware will hang forever when interface is up again.
 394          */
 395         rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
 396
 397         /*
 398          * Wait for stable hardware.
 399          */
 400         if (rt2800_wait_csr_ready(rt2x00dev))
 401                 return -EBUSY;
 402
 403         if (rt2x00_is_pci(rt2x00dev)) {
 404                 if (rt2x00_rt(rt2x00dev, RT3572) ||
 405                     rt2x00_rt(rt2x00dev, RT5390)) {
 406                         rt2800_register_read(rt2x00dev, AUX_CTRL, &reg);
 407                         rt2x00_set_field32(&reg, AUX_CTRL_FORCE_PCIE_CLK, 1);
 408                         rt2x00_set_field32(&reg, AUX_CTRL_WAKE_PCIE_EN, 1);
 409                         rt2800_register_write(rt2x00dev, AUX_CTRL, reg);
 410                 }
 411                 rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
 412         }
 413
 414         /*
 415          * Disable DMA, will be reenabled later when enabling
 416          * the radio.
 417          */
 418         rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 419         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
 420         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
 421         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
 422         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
 423         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
 424         rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 425
 426         /*
 427          * Write firmware to the device.
 428          */
 429         rt2800_drv_write_firmware(rt2x00dev, data, len);
 430
 431         /*
 432          * Wait for device to stabilize.
 433          */
 434         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 435                 rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
 436                 if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
 437                         break;
 438                 msleep(1);
 439         }
 440
 441         if (i == REGISTER_BUSY_COUNT) {
 442                 ERROR(rt2x00dev, "PBF system register not ready.\n");
 443                 return -EBUSY;
 444         }
 445
 446         /*
 447          * Initialize firmware.
 448          */
 449         rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
 450         rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 451         msleep(1);
 452
 453         return 0;
 454 }
 455 EXPORT_SYMBOL_GPL(rt2800_load_firmware);
 456
 457 void rt2800_write_tx_data(struct queue_entry *entry,
 458                           struct txentry_desc *txdesc)
 459 {
 460         __le32 *txwi = rt2800_drv_get_txwi(entry);
 461         u32 word;
 462
 463         /*
 464          * Initialize TX Info descriptor
 465          */
 466         rt2x00_desc_read(txwi, 0, &word);
 467         rt2x00_set_field32(&word, TXWI_W0_FRAG,
 468                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
 469         rt2x00_set_field32(&word, TXWI_W0_MIMO_PS,
 470                            test_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags));
 471         rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
 472         rt2x00_set_field32(&word, TXWI_W0_TS,
 473                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
 474         rt2x00_set_field32(&word, TXWI_W0_AMPDU,
 475                            test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
 476         rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY,
 477                            txdesc->u.ht.mpdu_density);
 478         rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->u.ht.txop);
 479         rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->u.ht.mcs);
 480         rt2x00_set_field32(&word, TXWI_W0_BW,
 481                            test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
 482         rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
 483                            test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
 484         rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->u.ht.stbc);
 485         rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
 486         rt2x00_desc_write(txwi, 0, word);
 487
 488         rt2x00_desc_read(txwi, 1, &word);
 489         rt2x00_set_field32(&word, TXWI_W1_ACK,
 490                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
 491         rt2x00_set_field32(&word, TXWI_W1_NSEQ,
 492                            test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
 493         rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->u.ht.ba_size);
 494         rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
 495                            test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
 496                            txdesc->key_idx : txdesc->u.ht.wcid);
 497         rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
 498                            txdesc->length);
 499         rt2x00_set_field32(&word, TXWI_W1_PACKETID_QUEUE, entry->queue->qid);
 500         rt2x00_set_field32(&word, TXWI_W1_PACKETID_ENTRY, (entry->entry_idx % 3) + 1);
 501         rt2x00_desc_write(txwi, 1, word);
 502
 503         /*
 504          * Always write 0 to IV/EIV fields, hardware will insert the IV
 505          * from the IVEIV register when TXD_W3_WIV is set to 0.
 506          * When TXD_W3_WIV is set to 1 it will use the IV data
 507          * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
 508          * crypto entry in the registers should be used to encrypt the frame.
 509          */
 510         _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
 511         _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
 512 }
 513 EXPORT_SYMBOL_GPL(rt2800_write_tx_data);
 514
 515 static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, u32 rxwi_w2)
 516 {
 517         s8 rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0);
 518         s8 rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1);
 519         s8 rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2);
 520         u16 eeprom;
 521         u8 offset0;
 522         u8 offset1;
 523         u8 offset2;
 524
 525         if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
 526                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &eeprom);
 527                 offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0);
 528                 offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1);
 529                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
 530                 offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_OFFSET2);
 531         } else {
 532                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &eeprom);
 533                 offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET0);
 534                 offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET1);
 535                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
 536                 offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_OFFSET2);
 537         }
 538
 539         /*
 540          * Convert the value from the descriptor into the RSSI value
 541          * If the value in the descriptor is 0, it is considered invalid
 542          * and the default (extremely low) rssi value is assumed
 543          */
 544         rssi0 = (rssi0) ? (-12 - offset0 - rt2x00dev->lna_gain - rssi0) : -128;
 545         rssi1 = (rssi1) ? (-12 - offset1 - rt2x00dev->lna_gain - rssi1) : -128;
 546         rssi2 = (rssi2) ? (-12 - offset2 - rt2x00dev->lna_gain - rssi2) : -128;
 547
 548         /*
 549          * mac80211 only accepts a single RSSI value. Calculating the
 550          * average doesn't deliver a fair answer either since -60:-60 would
 551          * be considered equally good as -50:-70 while the second is the one
 552          * which gives less energy...
 553          */
 554         rssi0 = max(rssi0, rssi1);
 555         return (int)max(rssi0, rssi2);
 556 }
 557
 558 void rt2800_process_rxwi(struct queue_entry *entry,
 559                          struct rxdone_entry_desc *rxdesc)
 560 {
 561         __le32 *rxwi = (__le32 *) entry->skb->data;
 562         u32 word;
 563
 564         rt2x00_desc_read(rxwi, 0, &word);
 565
 566         rxdesc->cipher = rt2x00_get_field32(word, RXWI_W0_UDF);
 567         rxdesc->size = rt2x00_get_field32(word, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
 568
 569         rt2x00_desc_read(rxwi, 1, &word);
 570
 571         if (rt2x00_get_field32(word, RXWI_W1_SHORT_GI))
 572                 rxdesc->flags |= RX_FLAG_SHORT_GI;
 573
 574         if (rt2x00_get_field32(word, RXWI_W1_BW))
 575                 rxdesc->flags |= RX_FLAG_40MHZ;
 576
 577         /*
 578          * Detect RX rate, always use MCS as signal type.
 579          */
 580         rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
 581         rxdesc->signal = rt2x00_get_field32(word, RXWI_W1_MCS);
 582         rxdesc->rate_mode = rt2x00_get_field32(word, RXWI_W1_PHYMODE);
 583
 584         /*
 585          * Mask of 0x8 bit to remove the short preamble flag.
 586          */
 587         if (rxdesc->rate_mode == RATE_MODE_CCK)
 588                 rxdesc->signal &= ~0x8;
 589
 590         rt2x00_desc_read(rxwi, 2, &word);
 591
 592         /*
 593          * Convert descriptor AGC value to RSSI value.
 594          */
 595         rxdesc->rssi = rt2800_agc_to_rssi(entry->queue->rt2x00dev, word);
 596
 597         /*
 598          * Remove RXWI descriptor from start of buffer.
 599          */
 600         skb_pull(entry->skb, RXWI_DESC_SIZE);
 601 }
 602 EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
 603
 604 void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
 605 {
 606         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 607         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 608         struct txdone_entry_desc txdesc;
 609         u32 word;
 610         u16 mcs, real_mcs;
 611         int aggr, ampdu;
 612
 613         /*
 614          * Obtain the status about this packet.
 615          */
 616         txdesc.flags = 0;
 617         rt2x00_desc_read(txwi, 0, &word);
 618
 619         mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
 620         ampdu = rt2x00_get_field32(word, TXWI_W0_AMPDU);
 621
 622         real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
 623         aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE);
 624
 625         /*
 626          * If a frame was meant to be sent as a single non-aggregated MPDU
 627          * but ended up in an aggregate the used tx rate doesn't correlate
 628          * with the one specified in the TXWI as the whole aggregate is sent
 629          * with the same rate.
 630          *
 631          * For example: two frames are sent to rt2x00, the first one sets
 632          * AMPDU=1 and requests MCS7 whereas the second frame sets AMDPU=0
 633          * and requests MCS15. If the hw aggregates both frames into one
 634          * AMDPU the tx status for both frames will contain MCS7 although
 635          * the frame was sent successfully.
 636          *
 637          * Hence, replace the requested rate with the real tx rate to not
 638          * confuse the rate control algortihm by providing clearly wrong
 639          * data.
 640          */
 641         if (unlikely(aggr == 1 && ampdu == 0 && real_mcs != mcs)) {
 642                 skbdesc->tx_rate_idx = real_mcs;
 643                 mcs = real_mcs;
 644         }
 645
 646         if (aggr == 1 || ampdu == 1)
 647                 __set_bit(TXDONE_AMPDU, &txdesc.flags);
 648
 649         /*
 650          * Ralink has a retry mechanism using a global fallback
 651          * table. We setup this fallback table to try the immediate
 652          * lower rate for all rates. In the TX_STA_FIFO, the MCS field
 653          * always contains the MCS used for the last transmission, be
 654          * it successful or not.
 655          */
 656         if (rt2x00_get_field32(status, TX_STA_FIFO_TX_SUCCESS)) {
 657                 /*
 658                  * Transmission succeeded. The number of retries is
 659                  * mcs - real_mcs
 660                  */
 661                 __set_bit(TXDONE_SUCCESS, &txdesc.flags);
 662                 txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0);
 663         } else {
 664                 /*
 665                  * Transmission failed. The number of retries is
 666                  * always 7 in this case (for a total number of 8
 667                  * frames sent).
 668                  */
 669                 __set_bit(TXDONE_FAILURE, &txdesc.flags);
 670                 txdesc.retry = rt2x00dev->long_retry;
 671         }
 672
 673         /*
 674          * the frame was retried at least once
 675          * -> hw used fallback rates
 676          */
 677         if (txdesc.retry)
 678                 __set_bit(TXDONE_FALLBACK, &txdesc.flags);
 679
 680         rt2x00lib_txdone(entry, &txdesc);
 681 }
 682 EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
 683
 684 void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
 685 {
 686         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 687         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 688         unsigned int beacon_base;
 689         unsigned int padding_len;
 690         u32 orig_reg, reg;
 691
 692         /*
 693          * Disable beaconing while we are reloading the beacon data,
 694          * otherwise we might be sending out invalid data.
 695          */
 696         rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 697         orig_reg = reg;
 698         rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
 699         rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 700
 701         /*
 702          * Add space for the TXWI in front of the skb.
 703          */
 704         memset(skb_push(entry->skb, TXWI_DESC_SIZE), 0, TXWI_DESC_SIZE);
 705
 706         /*
 707          * Register descriptor details in skb frame descriptor.
 708          */
 709         skbdesc->flags |= SKBDESC_DESC_IN_SKB;
 710         skbdesc->desc = entry->skb->data;
 711         skbdesc->desc_len = TXWI_DESC_SIZE;
 712
 713         /*
 714          * Add the TXWI for the beacon to the skb.
 715          */
 716         rt2800_write_tx_data(entry, txdesc);
 717
 718         /*
 719          * Dump beacon to userspace through debugfs.
 720          */
 721         rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
 722
 723         /*
 724          * Write entire beacon with TXWI and padding to register.
 725          */
 726         padding_len = roundup(entry->skb->len, 4) - entry->skb->len;
 727         if (padding_len && skb_pad(entry->skb, padding_len)) {
 728                 ERROR(rt2x00dev, "Failure padding beacon, aborting\n");
 729                 /* skb freed by skb_pad() on failure */
 730                 entry->skb = NULL;
 731                 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg);
 732                 return;
 733         }
 734
 735         beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
 736         rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data,
 737                                    entry->skb->len + padding_len);
 738
 739         /*
 740          * Enable beaconing again.
 741          */
 742         rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
 743         rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 744
 745         /*
 746          * Clean up beacon skb.
 747          */
 748         dev_kfree_skb_any(entry->skb);
 749         entry->skb = NULL;
 750 }
 751 EXPORT_SYMBOL_GPL(rt2800_write_beacon);
 752
 753 static inline void rt2800_clear_beacon_register(struct rt2x00_dev *rt2x00dev,
 754                                                 unsigned int beacon_base)
 755 {
 756         int i;
 757
 758         /*
 759          * For the Beacon base registers we only need to clear
 760          * the whole TXWI which (when set to 0) will invalidate
 761          * the entire beacon.
 762          */
 763         for (i = 0; i < TXWI_DESC_SIZE; i += sizeof(__le32))
 764                 rt2800_register_write(rt2x00dev, beacon_base + i, 0);
 765 }
 766
 767 void rt2800_clear_beacon(struct queue_entry *entry)
 768 {
 769         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 770         u32 reg;
 771
 772         /*
 773          * Disable beaconing while we are reloading the beacon data,
 774          * otherwise we might be sending out invalid data.
 775          */
 776         rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 777         rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
 778         rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 779
 780         /*
 781          * Clear beacon.
 782          */
 783         rt2800_clear_beacon_register(rt2x00dev,
 784                                      HW_BEACON_OFFSET(entry->entry_idx));
 785
 786         /*
 787          * Enabled beaconing again.
 788          */
 789         rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
 790         rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 791 }
 792 EXPORT_SYMBOL_GPL(rt2800_clear_beacon);
 793
 794 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 795 const struct rt2x00debug rt2800_rt2x00debug = {
 796         .owner  = THIS_MODULE,
 797         .csr    = {
 798                 .read           = rt2800_register_read,
 799                 .write          = rt2800_register_write,
 800                 .flags          = RT2X00DEBUGFS_OFFSET,
 801                 .word_base      = CSR_REG_BASE,
 802                 .word_size      = sizeof(u32),
 803                 .word_count     = CSR_REG_SIZE / sizeof(u32),
 804         },
 805         .eeprom = {
 806                 .read           = rt2x00_eeprom_read,
 807                 .write          = rt2x00_eeprom_write,
 808                 .word_base      = EEPROM_BASE,
 809                 .word_size      = sizeof(u16),
 810                 .word_count     = EEPROM_SIZE / sizeof(u16),
 811         },
 812         .bbp    = {
 813                 .read           = rt2800_bbp_read,
 814                 .write          = rt2800_bbp_write,
 815                 .word_base      = BBP_BASE,
 816                 .word_size      = sizeof(u8),
 817                 .word_count     = BBP_SIZE / sizeof(u8),
 818         },
 819         .rf     = {
 820                 .read           = rt2x00_rf_read,
 821                 .write          = rt2800_rf_write,
 822                 .word_base      = RF_BASE,
 823                 .word_size      = sizeof(u32),
 824                 .word_count     = RF_SIZE / sizeof(u32),
 825         },
 826 };
 827 EXPORT_SYMBOL_GPL(rt2800_rt2x00debug);
 828 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 829
 830 int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 831 {
 832         u32 reg;
 833
 834         rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
 835         return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
 836 }
 837 EXPORT_SYMBOL_GPL(rt2800_rfkill_poll);
 838
 839 #ifdef CONFIG_RT2X00_LIB_LEDS
 840 static void rt2800_brightness_set(struct led_classdev *led_cdev,
 841                                   enum led_brightness brightness)
 842 {
 843         struct rt2x00_led *led =
 844             container_of(led_cdev, struct rt2x00_led, led_dev);
 845         unsigned int enabled = brightness != LED_OFF;
 846         unsigned int bg_mode =
 847             (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
 848         unsigned int polarity =
 849                 rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
 850                                    EEPROM_FREQ_LED_POLARITY);
 851         unsigned int ledmode =
 852                 rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
 853                                    EEPROM_FREQ_LED_MODE);
 854         u32 reg;
 855
 856         /* Check for SoC (SOC devices don't support MCU requests) */
 857         if (rt2x00_is_soc(led->rt2x00dev)) {
 858                 rt2800_register_read(led->rt2x00dev, LED_CFG, &reg);
 859
 860                 /* Set LED Polarity */
 861                 rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, polarity);
 862
 863                 /* Set LED Mode */
 864                 if (led->type == LED_TYPE_RADIO) {
 865                         rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE,
 866                                            enabled ? 3 : 0);
 867                 } else if (led->type == LED_TYPE_ASSOC) {
 868                         rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE,
 869                                            enabled ? 3 : 0);
 870                 } else if (led->type == LED_TYPE_QUALITY) {
 871                         rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE,
 872                                            enabled ? 3 : 0);
 873                 }
 874
 875                 rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
 876
 877         } else {
 878                 if (led->type == LED_TYPE_RADIO) {
 879                         rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
 880                                               enabled ? 0x20 : 0);
 881                 } else if (led->type == LED_TYPE_ASSOC) {
 882                         rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
 883                                               enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
 884                 } else if (led->type == LED_TYPE_QUALITY) {
 885                         /*
 886                          * The brightness is divided into 6 levels (0 - 5),
 887                          * The specs tell us the following levels:
 888                          *      0, 1 ,3, 7, 15, 31
 889                          * to determine the level in a simple way we can simply
 890                          * work with bitshifting:
 891                          *      (1 << level) - 1
 892                          */
 893                         rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
 894                                               (1 << brightness / (LED_FULL / 6)) - 1,
 895                                               polarity);
 896                 }
 897         }
 898 }
 899
 900 static void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
 901                      struct rt2x00_led *led, enum led_type type)
 902 {
 903         led->rt2x00dev = rt2x00dev;
 904         led->type = type;
 905         led->led_dev.brightness_set = rt2800_brightness_set;
 906         led->flags = LED_INITIALIZED;
 907 }
 908 #endif /* CONFIG_RT2X00_LIB_LEDS */
 909
 910 /*
 911  * Configuration handlers.
 912  */
 913 static void rt2800_config_wcid(struct rt2x00_dev *rt2x00dev,
 914                                const u8 *address,
 915                                int wcid)
 916 {
 917         struct mac_wcid_entry wcid_entry;
 918         u32 offset;
 919
 920         offset = MAC_WCID_ENTRY(wcid);
 921
 922         memset(&wcid_entry, 0xff, sizeof(wcid_entry));
 923         if (address)
 924                 memcpy(wcid_entry.mac, address, ETH_ALEN);
 925
 926         rt2800_register_multiwrite(rt2x00dev, offset,
 927                                       &wcid_entry, sizeof(wcid_entry));
 928 }
 929
 930 static void rt2800_delete_wcid_attr(struct rt2x00_dev *rt2x00dev, int wcid)
 931 {
 932         u32 offset;
 933         offset = MAC_WCID_ATTR_ENTRY(wcid);
 934         rt2800_register_write(rt2x00dev, offset, 0);
 935 }
 936
 937 static void rt2800_config_wcid_attr_bssidx(struct rt2x00_dev *rt2x00dev,
 938                                            int wcid, u32 bssidx)
 939 {
 940         u32 offset = MAC_WCID_ATTR_ENTRY(wcid);
 941         u32 reg;
 942
 943         /*
 944          * The BSS Idx numbers is split in a main value of 3 bits,
 945          * and a extended field for adding one additional bit to the value.
 946          */
 947         rt2800_register_read(rt2x00dev, offset, &reg);
 948         rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX, (bssidx & 0x7));
 949         rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX_EXT,
 950                            (bssidx & 0x8) >> 3);
 951         rt2800_register_write(rt2x00dev, offset, reg);
 952 }
 953
 954 static void rt2800_config_wcid_attr_cipher(struct rt2x00_dev *rt2x00dev,
 955                                            struct rt2x00lib_crypto *crypto,
 956                                            struct ieee80211_key_conf *key)
 957 {
 958         struct mac_iveiv_entry iveiv_entry;
 959         u32 offset;
 960         u32 reg;
 961
 962         offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
 963
 964         if (crypto->cmd == SET_KEY) {
 965                 rt2800_register_read(rt2x00dev, offset, &reg);
 966                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
 967                                    !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
 968                 /*
 969                  * Both the cipher as the BSS Idx numbers are split in a main
 970                  * value of 3 bits, and a extended field for adding one additional
 971                  * bit to the value.
 972                  */
 973                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
 974                                    (crypto->cipher & 0x7));
 975                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER_EXT,
 976                                    (crypto->cipher & 0x8) >> 3);
 977                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
 978                 rt2800_register_write(rt2x00dev, offset, reg);
 979         } else {
 980                 /* Delete the cipher without touching the bssidx */
 981                 rt2800_register_read(rt2x00dev, offset, &reg);
 982                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB, 0);
 983                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, 0);
 984                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER_EXT, 0);
 985                 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
 986                 rt2800_register_write(rt2x00dev, offset, reg);
 987         }
 988
 989         offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
 990
 991         memset(&iveiv_entry, 0, sizeof(iveiv_entry));
 992         if ((crypto->cipher == CIPHER_TKIP) ||
 993             (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
 994             (crypto->cipher == CIPHER_AES))
 995                 iveiv_entry.iv[3] |= 0x20;
 996         iveiv_entry.iv[3] |= key->keyidx << 6;
 997         rt2800_register_multiwrite(rt2x00dev, offset,
 998                                       &iveiv_entry, sizeof(iveiv_entry));
 999 }
1000
1001 int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
1002                              struct rt2x00lib_crypto *crypto,
1003                              struct ieee80211_key_conf *key)
1004 {
1005         struct hw_key_entry key_entry;
1006         struct rt2x00_field32 field;
1007         u32 offset;
1008         u32 reg;
1009
1010         if (crypto->cmd == SET_KEY) {
1011                 key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
1012
1013                 memcpy(key_entry.key, crypto->key,
1014                        sizeof(key_entry.key));
1015                 memcpy(key_entry.tx_mic, crypto->tx_mic,
1016                        sizeof(key_entry.tx_mic));
1017                 memcpy(key_entry.rx_mic, crypto->rx_mic,
1018                        sizeof(key_entry.rx_mic));
1019
1020                 offset = SHARED_KEY_ENTRY(key->hw_key_idx);
1021                 rt2800_register_multiwrite(rt2x00dev, offset,
1022                                               &key_entry, sizeof(key_entry));
1023         }
1024
1025         /*
1026          * The cipher types are stored over multiple registers
1027          * starting with SHARED_KEY_MODE_BASE each word will have
1028          * 32 bits and contains the cipher types for 2 bssidx each.
1029          * Using the correct defines correctly will cause overhead,
1030          * so just calculate the correct offset.
1031          */
1032         field.bit_offset = 4 * (key->hw_key_idx % 8);
1033         field.bit_mask = 0x7 << field.bit_offset;
1034
1035         offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
1036
1037         rt2800_register_read(rt2x00dev, offset, &reg);
1038         rt2x00_set_field32(&reg, field,
1039                            (crypto->cmd == SET_KEY) * crypto->cipher);
1040         rt2800_register_write(rt2x00dev, offset, reg);
1041
1042         /*
1043          * Update WCID information
1044          */
1045         rt2800_config_wcid(rt2x00dev, crypto->address, key->hw_key_idx);
1046         rt2800_config_wcid_attr_bssidx(rt2x00dev, key->hw_key_idx,
1047                                        crypto->bssidx);
1048         rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key);
1049
1050         return 0;
1051 }
1052 EXPORT_SYMBOL_GPL(rt2800_config_shared_key);
1053
1054 static inline int rt2800_find_wcid(struct rt2x00_dev *rt2x00dev)
1055 {
1056         struct mac_wcid_entry wcid_entry;
1057         int idx;
1058         u32 offset;
1059
1060         /*
1061          * Search for the first free WCID entry and return the corresponding
1062          * index.
1063          *
1064          * Make sure the WCID starts _after_ the last possible shared key
1065          * entry (>32).
1066          *
1067          * Since parts of the pairwise key table might be shared with
1068          * the beacon frame buffers 6 & 7 we should only write into the
1069          * first 222 entries.
1070          */
1071         for (idx = 33; idx <= 222; idx++) {
1072                 offset = MAC_WCID_ENTRY(idx);
1073                 rt2800_register_multiread(rt2x00dev, offset, &wcid_entry,
1074                                           sizeof(wcid_entry));
1075                 if (is_broadcast_ether_addr(wcid_entry.mac))
1076                         return idx;
1077         }
1078
1079         /*
1080          * Use -1 to indicate that we don't have any more space in the WCID
1081          * table.
1082          */
1083         return -1;
1084 }
1085
1086 int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
1087                                struct rt2x00lib_crypto *crypto,
1088                                struct ieee80211_key_conf *key)
1089 {
1090         struct hw_key_entry key_entry;
1091         u32 offset;
1092
1093         if (crypto->cmd == SET_KEY) {
1094                 /*
1095                  * Allow key configuration only for STAs that are
1096                  * known by the hw.
1097                  */
1098                 if (crypto->wcid < 0)
1099                         return -ENOSPC;
1100                 key->hw_key_idx = crypto->wcid;
1101
1102                 memcpy(key_entry.key, crypto->key,
1103                        sizeof(key_entry.key));
1104                 memcpy(key_entry.tx_mic, crypto->tx_mic,
1105                        sizeof(key_entry.tx_mic));
1106                 memcpy(key_entry.rx_mic, crypto->rx_mic,
1107                        sizeof(key_entry.rx_mic));
1108
1109                 offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
1110                 rt2800_register_multiwrite(rt2x00dev, offset,
1111                                               &key_entry, sizeof(key_entry));
1112         }
1113
1114         /*
1115          * Update WCID information
1116          */
1117         rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key);
1118
1119         return 0;
1120 }
1121 EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key);
1122
1123 int rt2800_sta_add(struct rt2x00_dev *rt2x00dev, struct ieee80211_vif *vif,
1124                    struct ieee80211_sta *sta)
1125 {
1126         int wcid;
1127         struct rt2x00_sta *sta_priv = sta_to_rt2x00_sta(sta);
1128
1129         /*
1130          * Find next free WCID.
1131          */
1132         wcid = rt2800_find_wcid(rt2x00dev);
1133
1134         /*
1135          * Store selected wcid even if it is invalid so that we can
1136          * later decide if the STA is uploaded into the hw.
1137          */
1138         sta_priv->wcid = wcid;
1139
1140         /*
1141          * No space left in the device, however, we can still communicate
1142          * with the STA -> No error.
1143          */
1144         if (wcid < 0)
1145                 return 0;
1146
1147         /*
1148          * Clean up WCID attributes and write STA address to the device.
1149          */
1150         rt2800_delete_wcid_attr(rt2x00dev, wcid);
1151         rt2800_config_wcid(rt2x00dev, sta->addr, wcid);
1152         rt2800_config_wcid_attr_bssidx(rt2x00dev, wcid,
1153                                        rt2x00lib_get_bssidx(rt2x00dev, vif));
1154         return 0;
1155 }
1156 EXPORT_SYMBOL_GPL(rt2800_sta_add);
1157
1158 int rt2800_sta_remove(struct rt2x00_dev *rt2x00dev, int wcid)
1159 {
1160         /*
1161          * Remove WCID entry, no need to clean the attributes as they will
1162          * get renewed when the WCID is reused.
1163          */
1164         rt2800_config_wcid(rt2x00dev, NULL, wcid);
1165
1166         return 0;
1167 }
1168 EXPORT_SYMBOL_GPL(rt2800_sta_remove);
1169
1170 void rt2800_config_filter(struct rt2x00_dev *rt2x00dev,
1171                           const unsigned int filter_flags)
1172 {
1173         u32 reg;
1174
1175         /*
1176          * Start configuration steps.
1177          * Note that the version error will always be dropped
1178          * and broadcast frames will always be accepted since
1179          * there is no filter for it at this time.
1180          */
1181         rt2800_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
1182         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
1183                            !(filter_flags & FIF_FCSFAIL));
1184         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
1185                            !(filter_flags & FIF_PLCPFAIL));
1186         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
1187                            !(filter_flags & FIF_PROMISC_IN_BSS));
1188         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
1189         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
1190         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
1191                            !(filter_flags & FIF_ALLMULTI));
1192         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
1193         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
1194         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
1195                            !(filter_flags & FIF_CONTROL));
1196         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
1197                            !(filter_flags & FIF_CONTROL));
1198         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
1199                            !(filter_flags & FIF_CONTROL));
1200         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
1201                            !(filter_flags & FIF_CONTROL));
1202         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
1203                            !(filter_flags & FIF_CONTROL));
1204         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
1205                            !(filter_flags & FIF_PSPOLL));
1206         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA,
1207                            !(filter_flags & FIF_CONTROL));
1208         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR,
1209                            !(filter_flags & FIF_CONTROL));
1210         rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
1211                            !(filter_flags & FIF_CONTROL));
1212         rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg);
1213 }
1214 EXPORT_SYMBOL_GPL(rt2800_config_filter);
1215
1216 void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
1217                         struct rt2x00intf_conf *conf, const unsigned int flags)
1218 {
1219         u32 reg;
1220         bool update_bssid = false;
1221
1222         if (flags & CONFIG_UPDATE_TYPE) {
1223                 /*
1224                  * Enable synchronisation.
1225                  */
1226                 rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
1227                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
1228                 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
1229
1230                 if (conf->sync == TSF_SYNC_AP_NONE) {
1231                         /*
1232                          * Tune beacon queue transmit parameters for AP mode
1233                          */
1234                         rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG, &reg);
1235                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_CWMIN, 0);
1236                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_AIFSN, 1);
1237                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
1238                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_TBTT_ADJUST, 0);
1239                         rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
1240                 } else {
1241                         rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG, &reg);
1242                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_CWMIN, 4);
1243                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_AIFSN, 2);
1244                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
1245                         rt2x00_set_field32(&reg, TBTT_SYNC_CFG_TBTT_ADJUST, 16);
1246                         rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
1247                 }
1248         }
1249
1250         if (flags & CONFIG_UPDATE_MAC) {
1251                 if (flags & CONFIG_UPDATE_TYPE &&
1252                     conf->sync == TSF_SYNC_AP_NONE) {
1253                         /*
1254                          * The BSSID register has to be set to our own mac
1255                          * address in AP mode.
1256                          */
1257                         memcpy(conf->bssid, conf->mac, sizeof(conf->mac));
1258                         update_bssid = true;
1259                 }
1260
1261                 if (!is_zero_ether_addr((const u8 *)conf->mac)) {
1262                         reg = le32_to_cpu(conf->mac[1]);
1263                         rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
1264                         conf->mac[1] = cpu_to_le32(reg);
1265                 }
1266
1267                 rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
1268                                               conf->mac, sizeof(conf->mac));
1269         }
1270
1271         if ((flags & CONFIG_UPDATE_BSSID) || update_bssid) {
1272                 if (!is_zero_ether_addr((const u8 *)conf->bssid)) {
1273                         reg = le32_to_cpu(conf->bssid[1]);
1274                         rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 3);
1275                         rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 7);
1276                         conf->bssid[1] = cpu_to_le32(reg);
1277                 }
1278
1279                 rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
1280                                               conf->bssid, sizeof(conf->bssid));
1281         }
1282 }
1283 EXPORT_SYMBOL_GPL(rt2800_config_intf);
1284
1285 static void rt2800_config_ht_opmode(struct rt2x00_dev *rt2x00dev,
1286                                     struct rt2x00lib_erp *erp)
1287 {
1288         bool any_sta_nongf = !!(erp->ht_opmode &
1289                                 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
1290         u8 protection = erp->ht_opmode & IEEE80211_HT_OP_MODE_PROTECTION;
1291         u8 mm20_mode, mm40_mode, gf20_mode, gf40_mode;
1292         u16 mm20_rate, mm40_rate, gf20_rate, gf40_rate;
1293         u32 reg;
1294
1295         /* default protection rate for HT20: OFDM 24M */
1296         mm20_rate = gf20_rate = 0x4004;
1297
1298         /* default protection rate for HT40: duplicate OFDM 24M */
1299         mm40_rate = gf40_rate = 0x4084;
1300
1301         switch (protection) {
1302         case IEEE80211_HT_OP_MODE_PROTECTION_NONE:
1303                 /*
1304                  * All STAs in this BSS are HT20/40 but there might be
1305                  * STAs not supporting greenfield mode.
1306                  * => Disable protection for HT transmissions.
1307                  */
1308                 mm20_mode = mm40_mode = gf20_mode = gf40_mode = 0;
1309
1310                 break;
1311         case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
1312                 /*
1313                  * All STAs in this BSS are HT20 or HT20/40 but there
1314                  * might be STAs not supporting greenfield mode.
1315                  * => Protect all HT40 transmissions.
1316                  */
1317                 mm20_mode = gf20_mode = 0;
1318                 mm40_mode = gf40_mode = 2;
1319
1320                 break;
1321         case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER:
1322                 /*
1323                  * Nonmember protection:
1324                  * According to 802.11n we _should_ protect all
1325                  * HT transmissions (but we don't have to).
1326                  *
1327                  * But if cts_protection is enabled we _shall_ protect
1328                  * all HT transmissions using a CCK rate.
1329                  *
1330                  * And if any station is non GF we _shall_ protect
1331                  * GF transmissions.
1332                  *
1333                  * We decide to protect everything
1334                  * -> fall through to mixed mode.
1335                  */
1336         case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED:
1337                 /*
1338                  * Legacy STAs are present
1339                  * => Protect all HT transmissions.
1340                  */
1341                 mm20_mode = mm40_mode = gf20_mode = gf40_mode = 2;
1342
1343                 /*
1344                  * If erp protection is needed we have to protect HT
1345                  * transmissions with CCK 11M long preamble.
1346                  */
1347                 if (erp->cts_protection) {
1348                         /* don't duplicate RTS/CTS in CCK mode */
1349                         mm20_rate = mm40_rate = 0x0003;
1350                         gf20_rate = gf40_rate = 0x0003;
1351                 }
1352                 break;
1353         }
1354
1355         /* check for STAs not supporting greenfield mode */
1356         if (any_sta_nongf)
1357                 gf20_mode = gf40_mode = 2;
1358
1359         /* Update HT protection config */
1360         rt2800_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
1361         rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, mm20_rate);
1362         rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, mm20_mode);
1363         rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
1364
1365         rt2800_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
1366         rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, mm40_rate);
1367         rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, mm40_mode);
1368         rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
1369
1370         rt2800_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
1371         rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, gf20_rate);
1372         rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, gf20_mode);
1373         rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
1374
1375         rt2800_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
1376         rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, gf40_rate);
1377         rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, gf40_mode);
1378         rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
1379 }
1380
1381 void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp,
1382                        u32 changed)
1383 {
1384         u32 reg;
1385
1386         if (changed & BSS_CHANGED_ERP_PREAMBLE) {
1387                 rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
1388                 rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
1389                                    !!erp->short_preamble);
1390                 rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
1391                                    !!erp->short_preamble);
1392                 rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
1393         }
1394
1395         if (changed & BSS_CHANGED_ERP_CTS_PROT) {
1396                 rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
1397                 rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
1398                                    erp->cts_protection ? 2 : 0);
1399                 rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
1400         }
1401
1402         if (changed & BSS_CHANGED_BASIC_RATES) {
1403                 rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE,
1404                                          erp->basic_rates);
1405                 rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
1406         }
1407
1408         if (changed & BSS_CHANGED_ERP_SLOT) {
1409                 rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
1410                 rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME,
1411                                    erp->slot_time);
1412                 rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
1413
1414                 rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
1415                 rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
1416                 rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
1417         }
1418
1419         if (changed & BSS_CHANGED_BEACON_INT) {
1420                 rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
1421                 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
1422                                    erp->beacon_int * 16);
1423                 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
1424         }
1425
1426         if (changed & BSS_CHANGED_HT)
1427                 rt2800_config_ht_opmode(rt2x00dev, erp);
1428 }
1429 EXPORT_SYMBOL_GPL(rt2800_config_erp);
1430
1431 static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev)
1432 {
1433         u32 reg;
1434         u16 eeprom;
1435         u8 led_ctrl, led_g_mode, led_r_mode;
1436
1437         rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
1438         if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
1439                 rt2x00_set_field32(&reg, GPIO_SWITCH_0, 1);
1440                 rt2x00_set_field32(&reg, GPIO_SWITCH_1, 1);
1441         } else {
1442                 rt2x00_set_field32(&reg, GPIO_SWITCH_0, 0);
1443                 rt2x00_set_field32(&reg, GPIO_SWITCH_1, 0);
1444         }
1445         rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
1446
1447         rt2800_register_read(rt2x00dev, LED_CFG, &reg);
1448         led_g_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 3 : 0;
1449         led_r_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 0 : 3;
1450         if (led_g_mode != rt2x00_get_field32(reg, LED_CFG_G_LED_MODE) ||
1451             led_r_mode != rt2x00_get_field32(reg, LED_CFG_R_LED_MODE)) {
1452                 rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
1453                 led_ctrl = rt2x00_get_field16(eeprom, EEPROM_FREQ_LED_MODE);
1454                 if (led_ctrl == 0 || led_ctrl > 0x40) {
1455                         rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, led_g_mode);
1456                         rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, led_r_mode);
1457                         rt2800_register_write(rt2x00dev, LED_CFG, reg);
1458                 } else {
1459                         rt2800_mcu_request(rt2x00dev, MCU_BAND_SELECT, 0xff,
1460                                            (led_g_mode << 2) | led_r_mode, 1);
1461                 }
1462         }
1463 }
1464
1465 static void rt2800_set_ant_diversity(struct rt2x00_dev *rt2x00dev,
1466                                      enum antenna ant)
1467 {
1468         u32 reg;
1469         u8 eesk_pin = (ant == ANTENNA_A) ? 1 : 0;
1470         u8 gpio_bit3 = (ant == ANTENNA_A) ? 0 : 1;
1471
1472         if (rt2x00_is_pci(rt2x00dev)) {
1473                 rt2800_register_read(rt2x00dev, E2PROM_CSR, &reg);
1474                 rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK, eesk_pin);
1475                 rt2800_register_write(rt2x00dev, E2PROM_CSR, reg);
1476         } else if (rt2x00_is_usb(rt2x00dev))
1477                 rt2800_mcu_request(rt2x00dev, MCU_ANT_SELECT, 0xff,
1478                                    eesk_pin, 0);
1479
1480         rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
1481         rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT3, 0);
1482         rt2x00_set_field32(&reg, GPIO_CTRL_CFG_BIT3, gpio_bit3);
1483         rt2800_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
1484 }
1485
1486 void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
1487 {
1488         u8 r1;
1489         u8 r3;
1490         u16 eeprom;
1491
1492         rt2800_bbp_read(rt2x00dev, 1, &r1);
1493         rt2800_bbp_read(rt2x00dev, 3, &r3);
1494
1495         if (rt2x00_rt(rt2x00dev, RT3572) &&
1496             test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags))
1497                 rt2800_config_3572bt_ant(rt2x00dev);
1498
1499         /*
1500          * Configure the TX antenna.
1501          */
1502         switch (ant->tx_chain_num) {
1503         case 1:
1504                 rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
1505                 break;
1506         case 2:
1507                 if (rt2x00_rt(rt2x00dev, RT3572) &&
1508                     test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags))
1509                         rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 1);
1510                 else
1511                         rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
1512                 break;
1513         case 3:
1514                 rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
1515                 break;
1516         }
1517
1518         /*
1519          * Configure the RX antenna.
1520          */
1521         switch (ant->rx_chain_num) {
1522         case 1:
1523                 if (rt2x00_rt(rt2x00dev, RT3070) ||
1524                     rt2x00_rt(rt2x00dev, RT3090) ||
1525                     rt2x00_rt(rt2x00dev, RT3390)) {
1526                         rt2x00_eeprom_read(rt2x00dev,
1527                                            EEPROM_NIC_CONF1, &eeprom);
1528                         if (rt2x00_get_field16(eeprom,
1529                                                 EEPROM_NIC_CONF1_ANT_DIVERSITY))
1530                                 rt2800_set_ant_diversity(rt2x00dev,
1531                                                 rt2x00dev->default_ant.rx);
1532                 }
1533                 rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
1534                 break;
1535         case 2:
1536                 if (rt2x00_rt(rt2x00dev, RT3572) &&
1537                     test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
1538                         rt2x00_set_field8(&r3, BBP3_RX_ADC, 1);
1539                         rt2x00_set_field8(&r3, BBP3_RX_ANTENNA,
1540                                 rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
1541                         rt2800_set_ant_diversity(rt2x00dev, ANTENNA_B);
1542                 } else {
1543                         rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
1544                 }
1545                 break;
1546         case 3:
1547                 rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
1548                 break;
1549         }
1550
1551         rt2800_bbp_write(rt2x00dev, 3, r3);
1552         rt2800_bbp_write(rt2x00dev, 1, r1);
1553 }
1554 EXPORT_SYMBOL_GPL(rt2800_config_ant);
1555
1556 static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev,
1557                                    struct rt2x00lib_conf *libconf)
1558 {
1559         u16 eeprom;
1560         short lna_gain;
1561
1562         if (libconf->rf.channel <= 14) {
1563                 rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
1564                 lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
1565         } else if (libconf->rf.channel <= 64) {
1566                 rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
1567                 lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
1568         } else if (libconf->rf.channel <= 128) {
1569                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
1570                 lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
1571         } else {
1572                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
1573                 lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
1574         }
1575
1576         rt2x00dev->lna_gain = lna_gain;
1577 }
1578
1579 static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev,
1580                                          struct ieee80211_conf *conf,
1581                                          struct rf_channel *rf,
1582                                          struct channel_info *info)
1583 {
1584         rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
1585
1586         if (rt2x00dev->default_ant.tx_chain_num == 1)
1587                 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
1588
1589         if (rt2x00dev->default_ant.rx_chain_num == 1) {
1590                 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
1591                 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
1592         } else if (rt2x00dev->default_ant.rx_chain_num == 2)
1593                 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
1594
1595         if (rf->channel > 14) {
1596                 /*
1597                  * When TX power is below 0, we should increase it by 7 to
1598                  * make it a positive value (Minimum value is -7).
1599                  * However this means that values between 0 and 7 have
1600                  * double meaning, and we should set a 7DBm boost flag.
1601                  */
1602                 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
1603                                    (info->default_power1 >= 0));
1604
1605                 if (info->default_power1 < 0)
1606                         info->default_power1 += 7;
1607
1608                 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, info->default_power1);
1609
1610                 rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
1611                                    (info->default_power2 >= 0));
1612
1613                 if (info->default_power2 < 0)
1614                         info->default_power2 += 7;
1615
1616                 rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, info->default_power2);
1617         } else {
1618                 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, info->default_power1);
1619                 rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, info->default_power2);
1620         }
1621
1622         rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
1623
1624         rt2800_rf_write(rt2x00dev, 1, rf->rf1);
1625         rt2800_rf_write(rt2x00dev, 2, rf->rf2);
1626         rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
1627         rt2800_rf_write(rt2x00dev, 4, rf->rf4);
1628
1629         udelay(200);
1630
1631         rt2800_rf_write(rt2x00dev, 1, rf->rf1);
1632         rt2800_rf_write(rt2x00dev, 2, rf->rf2);
1633         rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
1634         rt2800_rf_write(rt2x00dev, 4, rf->rf4);
1635
1636         udelay(200);
1637
1638         rt2800_rf_write(rt2x00dev, 1, rf->rf1);
1639         rt2800_rf_write(rt2x00dev, 2, rf->rf2);
1640         rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
1641         rt2800_rf_write(rt2x00dev, 4, rf->rf4);
1642 }
1643
1644 static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
1645                                          struct ieee80211_conf *conf,
1646                                          struct rf_channel *rf,
1647                                          struct channel_info *info)
1648 {
1649         u8 rfcsr;
1650
1651         rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
1652         rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3);
1653
1654         rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
1655         rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
1656         rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
1657
1658         rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
1659         rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, info->default_power1);
1660         rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
1661
1662         rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr);
1663         rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->default_power2);
1664         rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
1665
1666         rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
1667         rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
1668         rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
1669
1670         rt2800_rfcsr_write(rt2x00dev, 24,
1671                               rt2x00dev->calibration[conf_is_ht40(conf)]);
1672
1673         rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
1674         rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
1675         rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
1676 }
1677
1678 static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
1679                                          struct ieee80211_conf *conf,
1680                                          struct rf_channel *rf,
1681                                          struct channel_info *info)
1682 {
1683         u8 rfcsr;
1684         u32 reg;
1685
1686         if (rf->channel <= 14) {
1687                 rt2800_bbp_write(rt2x00dev, 25, 0x15);
1688                 rt2800_bbp_write(rt2x00dev, 26, 0x85);
1689         } else {
1690                 rt2800_bbp_write(rt2x00dev, 25, 0x09);
1691                 rt2800_bbp_write(rt2x00dev, 26, 0xff);
1692         }
1693
1694         rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
1695         rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3);
1696
1697         rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
1698         rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
1699         if (rf->channel <= 14)
1700                 rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 2);
1701         else
1702                 rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 1);
1703         rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
1704
1705         rt2800_rfcsr_read(rt2x00dev, 5, &rfcsr);
1706         if (rf->channel <= 14)
1707                 rt2x00_set_field8(&rfcsr, RFCSR5_R1, 1);
1708         else
1709                 rt2x00_set_field8(&rfcsr, RFCSR5_R1, 2);
1710         rt2800_rfcsr_write(rt2x00dev, 5, rfcsr);
1711
1712         rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
1713         if (rf->channel <= 14) {
1714                 rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 3);
1715                 rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
1716                                 (info->default_power1 & 0x3) |
1717                                 ((info->default_power1 & 0xC) << 1));
1718         } else {
1719                 rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 7);
1720                 rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
1721                                 (info->default_power1 & 0x3) |
1722                                 ((info->default_power1 & 0xC) << 1));
1723         }
1724         rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
1725
1726         rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr);
1727         if (rf->channel <= 14) {
1728                 rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 3);
1729                 rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
1730                                 (info->default_power2 & 0x3) |
1731                                 ((info->default_power2 & 0xC) << 1));
1732         } else {
1733                 rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 7);
1734                 rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
1735                                 (info->default_power2 & 0x3) |
1736                                 ((info->default_power2 & 0xC) << 1));
1737         }
1738         rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
1739
1740         rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
1741         rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
1742         rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
1743         rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
1744         rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
1745         rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
1746         if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
1747                 if (rf->channel <= 14) {
1748                         rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
1749                         rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
1750                 }
1751                 rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
1752                 rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
1753         } else {
1754                 switch (rt2x00dev->default_ant.tx_chain_num) {
1755                 case 1:
1756                         rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
1757                 case 2:
1758                         rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
1759                         break;
1760                 }
1761
1762                 switch (rt2x00dev->default_ant.rx_chain_num) {
1763                 case 1:
1764                         rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
1765                 case 2:
1766                         rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
1767                         break;
1768                 }
1769         }
1770         rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
1771
1772         rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
1773         rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
1774         rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
1775
1776         rt2800_rfcsr_write(rt2x00dev, 24,
1777                               rt2x00dev->calibration[conf_is_ht40(conf)]);
1778         rt2800_rfcsr_write(rt2x00dev, 31,
1779                               rt2x00dev->calibration[conf_is_ht40(conf)]);
1780
1781         if (rf->channel <= 14) {
1782                 rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
1783                 rt2800_rfcsr_write(rt2x00dev, 9, 0xc3);
1784                 rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
1785                 rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
1786                 rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
1787                 rt2800_rfcsr_write(rt2x00dev, 16, 0x4c);
1788                 rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
1789                 rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
1790                 rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
1791                 rt2800_rfcsr_write(rt2x00dev, 25, 0x15);
1792                 rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
1793                 rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
1794                 rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
1795         } else {
1796                 rt2800_rfcsr_write(rt2x00dev, 7, 0x14);
1797                 rt2800_rfcsr_write(rt2x00dev, 9, 0xc0);
1798                 rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
1799                 rt2800_rfcsr_write(rt2x00dev, 11, 0x00);
1800                 rt2800_rfcsr_write(rt2x00dev, 15, 0x43);
1801                 rt2800_rfcsr_write(rt2x00dev, 16, 0x7a);
1802                 rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
1803                 if (rf->channel <= 64) {
1804                         rt2800_rfcsr_write(rt2x00dev, 19, 0xb7);
1805                         rt2800_rfcsr_write(rt2x00dev, 20, 0xf6);
1806                         rt2800_rfcsr_write(rt2x00dev, 25, 0x3d);
1807                 } else if (rf->channel <= 128) {
1808                         rt2800_rfcsr_write(rt2x00dev, 19, 0x74);
1809                         rt2800_rfcsr_write(rt2x00dev, 20, 0xf4);
1810                         rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
1811                 } else {
1812                         rt2800_rfcsr_write(rt2x00dev, 19, 0x72);
1813                         rt2800_rfcsr_write(rt2x00dev, 20, 0xf3);
1814                         rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
1815                 }
1816                 rt2800_rfcsr_write(rt2x00dev, 26, 0x87);
1817                 rt2800_rfcsr_write(rt2x00dev, 27, 0x01);
1818                 rt2800_rfcsr_write(rt2x00dev, 29, 0x9f);
1819         }
1820
1821         rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
1822         rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT7, 0);
1823         if (rf->channel <= 14)
1824                 rt2x00_set_field32(&reg, GPIO_CTRL_CFG_BIT7, 1);
1825         else
1826                 rt2x00_set_field32(&reg, GPIO_CTRL_CFG_BIT7, 0);
1827         rt2800_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
1828
1829         rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
1830         rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
1831         rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
1832 }
1833
1834 #define RT5390_POWER_BOUND     0x27
1835 #define RT5390_FREQ_OFFSET_BOUND       0x5f
1836
1837 static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
1838                                          struct ieee80211_conf *conf,
1839                                          struct rf_channel *rf,
1840                                          struct channel_info *info)
1841 {
1842         u8 rfcsr;
1843
1844         rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
1845         rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
1846         rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr);
1847         rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2);
1848         rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
1849
1850         rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr);
1851         if (info->default_power1 > RT5390_POWER_BOUND)
1852                 rt2x00_set_field8(&rfcsr, RFCSR49_TX, RT5390_POWER_BOUND);
1853         else
1854                 rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
1855         rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
1856
1857         rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
1858         rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
1859         rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
1860         rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
1861         rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
1862         rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
1863
1864         rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
1865         if (rt2x00dev->freq_offset > RT5390_FREQ_OFFSET_BOUND)
1866                 rt2x00_set_field8(&rfcsr, RFCSR17_CODE,
1867                                   RT5390_FREQ_OFFSET_BOUND);
1868         else
1869                 rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
1870         rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
1871
1872         if (rf->channel <= 14) {
1873                 int idx = rf->channel-1;
1874
1875                 if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
1876                         if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
1877                                 /* r55/r59 value array of channel 1~14 */
1878                                 static const char r55_bt_rev[] = {0x83, 0x83,
1879                                         0x83, 0x73, 0x73, 0x63, 0x53, 0x53,
1880                                         0x53, 0x43, 0x43, 0x43, 0x43, 0x43};
1881                                 static const char r59_bt_rev[] = {0x0e, 0x0e,
1882                                         0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09,
1883                                         0x07, 0x07, 0x07, 0x07, 0x07, 0x07};
1884
1885                                 rt2800_rfcsr_write(rt2x00dev, 55,
1886                                                    r55_bt_rev[idx]);
1887                                 rt2800_rfcsr_write(rt2x00dev, 59,
1888                                                    r59_bt_rev[idx]);
1889                         } else {
1890                                 static const char r59_bt[] = {0x8b, 0x8b, 0x8b,
1891                                         0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89,
1892                                         0x88, 0x88, 0x86, 0x85, 0x84};
1893
1894                                 rt2800_rfcsr_write(rt2x00dev, 59, r59_bt[idx]);
1895                         }
1896                 } else {
1897                         if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
1898                                 static const char r55_nonbt_rev[] = {0x23, 0x23,
1899                                         0x23, 0x23, 0x13, 0x13, 0x03, 0x03,
1900                                         0x03, 0x03, 0x03, 0x03, 0x03, 0x03};
1901                                 static const char r59_nonbt_rev[] = {0x07, 0x07,
1902                                         0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
1903                                         0x07, 0x07, 0x06, 0x05, 0x04, 0x04};
1904
1905                                 rt2800_rfcsr_write(rt2x00dev, 55,
1906                                                    r55_nonbt_rev[idx]);
1907                                 rt2800_rfcsr_write(rt2x00dev, 59,
1908                                                    r59_nonbt_rev[idx]);
1909                         } else if (rt2x00_rt(rt2x00dev, RT5390)) {
1910                                 static const char r59_non_bt[] = {0x8f, 0x8f,
1911                                         0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
1912                                         0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
1913
1914                                 rt2800_rfcsr_write(rt2x00dev, 59,
1915                                                    r59_non_bt[idx]);
1916                         }
1917                 }
1918         }
1919
1920         rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
1921         rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, 0);
1922         rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, 0);
1923         rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
1924
1925         rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
1926         rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
1927         rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
1928 }
1929
1930 static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
1931                                   struct ieee80211_conf *conf,
1932                                   struct rf_channel *rf,
1933                                   struct channel_info *info)
1934 {
1935         u32 reg;
1936         unsigned int tx_pin;
1937         u8 bbp;
1938
1939         if (rf->channel <= 14) {
1940                 info->default_power1 = TXPOWER_G_TO_DEV(info->default_power1);
1941                 info->default_power2 = TXPOWER_G_TO_DEV(info->default_power2);
1942         } else {
1943                 info->default_power1 = TXPOWER_A_TO_DEV(info->default_power1);
1944                 info->default_power2 = TXPOWER_A_TO_DEV(info->default_power2);
1945         }
1946
1947         switch (rt2x00dev->chip.rf) {
1948         case RF2020:
1949         case RF3020:
1950         case RF3021:
1951         case RF3022:
1952         case RF3320:
1953                 rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info);
1954                 break;
1955         case RF3052:
1956                 rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info);
1957                 break;
1958         case RF5370:
1959         case RF5390:
1960                 rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
1961                 break;
1962         default:
1963                 rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
1964         }
1965
1966         /*
1967          * Change BBP settings
1968          */
1969         rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
1970         rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
1971         rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
1972         rt2800_bbp_write(rt2x00dev, 86, 0);
1973
1974         if (rf->channel <= 14) {
1975                 if (!rt2x00_rt(rt2x00dev, RT5390)) {
1976                         if (test_bit(CAPABILITY_EXTERNAL_LNA_BG,
1977                                      &rt2x00dev->cap_flags)) {
1978                                 rt2800_bbp_write(rt2x00dev, 82, 0x62);
1979                                 rt2800_bbp_write(rt2x00dev, 75, 0x46);
1980                         } else {
1981                                 rt2800_bbp_write(rt2x00dev, 82, 0x84);
1982                                 rt2800_bbp_write(rt2x00dev, 75, 0x50);
1983                         }
1984                 }
1985         } else {
1986                 if (rt2x00_rt(rt2x00dev, RT3572))
1987                         rt2800_bbp_write(rt2x00dev, 82, 0x94);
1988                 else
1989                         rt2800_bbp_write(rt2x00dev, 82, 0xf2);
1990
1991                 if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags))
1992                         rt2800_bbp_write(rt2x00dev, 75, 0x46);
1993                 else
1994                         rt2800_bbp_write(rt2x00dev, 75, 0x50);
1995         }
1996
1997         rt2800_register_read(rt2x00dev, TX_BAND_CFG, &reg);
1998         rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_MINUS, conf_is_ht40_minus(conf));
1999         rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
2000         rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
2001         rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg);
2002
2003         if (rt2x00_rt(rt2x00dev, RT3572))
2004                 rt2800_rfcsr_write(rt2x00dev, 8, 0);
2005
2006         tx_pin = 0;
2007
2008         /* Turn on unused PA or LNA when not using 1T or 1R */
2009         if (rt2x00dev->default_ant.tx_chain_num == 2) {
2010                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN,
2011                                    rf->channel > 14);
2012                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN,
2013                                    rf->channel <= 14);
2014         }
2015
2016         /* Turn on unused PA or LNA when not using 1T or 1R */
2017         if (rt2x00dev->default_ant.rx_chain_num == 2) {
2018                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
2019                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
2020         }
2021
2022         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
2023         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
2024         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
2025         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
2026         if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags))
2027                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
2028         else
2029                 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN,
2030                                    rf->channel <= 14);
2031         rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
2032
2033         rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
2034
2035         if (rt2x00_rt(rt2x00dev, RT3572))
2036                 rt2800_rfcsr_write(rt2x00dev, 8, 0x80);
2037
2038         rt2800_bbp_read(rt2x00dev, 4, &bbp);
2039         rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
2040         rt2800_bbp_write(rt2x00dev, 4, bbp);
2041
2042         rt2800_bbp_read(rt2x00dev, 3, &bbp);
2043         rt2x00_set_field8(&bbp, BBP3_HT40_MINUS, conf_is_ht40_minus(conf));
2044         rt2800_bbp_write(rt2x00dev, 3, bbp);
2045
2046         if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
2047                 if (conf_is_ht40(conf)) {
2048                         rt2800_bbp_write(rt2x00dev, 69, 0x1a);
2049                         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
2050                         rt2800_bbp_write(rt2x00dev, 73, 0x16);
2051                 } else {
2052                         rt2800_bbp_write(rt2x00dev, 69, 0x16);
2053                         rt2800_bbp_write(rt2x00dev, 70, 0x08);
2054                         rt2800_bbp_write(rt2x00dev, 73, 0x11);
2055                 }
2056         }
2057
2058         msleep(1);
2059
2060         /*
2061          * Clear channel statistic counters
2062          */
2063         rt2800_register_read(rt2x00dev, CH_IDLE_STA, &reg);
2064         rt2800_register_read(rt2x00dev, CH_BUSY_STA, &reg);
2065         rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, &reg);
2066 }
2067
2068 static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev)
2069 {
2070         u8 tssi_bounds[9];
2071         u8 current_tssi;
2072         u16 eeprom;
2073         u8 step;
2074         int i;
2075
2076         /*
2077          * Read TSSI boundaries for temperature compensation from
2078          * the EEPROM.
2079          *
2080          * Array idx               0    1    2    3    4    5    6    7    8
2081          * Matching Delta value   -4   -3   -2   -1    0   +1   +2   +3   +4
2082          * Example TSSI bounds  0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00
2083          */
2084         if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
2085                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1, &eeprom);
2086                 tssi_bounds[0] = rt2x00_get_field16(eeprom,
2087                                         EEPROM_TSSI_BOUND_BG1_MINUS4);
2088                 tssi_bounds[1] = rt2x00_get_field16(eeprom,
2089                                         EEPROM_TSSI_BOUND_BG1_MINUS3);
2090
2091                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG2, &eeprom);
2092                 tssi_bounds[2] = rt2x00_get_field16(eeprom,
2093                                         EEPROM_TSSI_BOUND_BG2_MINUS2);
2094                 tssi_bounds[3] = rt2x00_get_field16(eeprom,
2095                                         EEPROM_TSSI_BOUND_BG2_MINUS1);
2096
2097                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG3, &eeprom);
2098                 tssi_bounds[4] = rt2x00_get_field16(eeprom,
2099                                         EEPROM_TSSI_BOUND_BG3_REF);
2100                 tssi_bounds[5] = rt2x00_get_field16(eeprom,
2101                                         EEPROM_TSSI_BOUND_BG3_PLUS1);
2102
2103                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG4, &eeprom);
2104                 tssi_bounds[6] = rt2x00_get_field16(eeprom,
2105                                         EEPROM_TSSI_BOUND_BG4_PLUS2);
2106                 tssi_bounds[7] = rt2x00_get_field16(eeprom,
2107                                         EEPROM_TSSI_BOUND_BG4_PLUS3);
2108
2109                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG5, &eeprom);
2110                 tssi_bounds[8] = rt2x00_get_field16(eeprom,
2111                                         EEPROM_TSSI_BOUND_BG5_PLUS4);
2112
2113                 step = rt2x00_get_field16(eeprom,
2114                                           EEPROM_TSSI_BOUND_BG5_AGC_STEP);
2115         } else {
2116                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A1, &eeprom);
2117                 tssi_bounds[0] = rt2x00_get_field16(eeprom,
2118                                         EEPROM_TSSI_BOUND_A1_MINUS4);
2119                 tssi_bounds[1] = rt2x00_get_field16(eeprom,
2120                                         EEPROM_TSSI_BOUND_A1_MINUS3);
2121
2122                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A2, &eeprom);
2123                 tssi_bounds[2] = rt2x00_get_field16(eeprom,
2124                                         EEPROM_TSSI_BOUND_A2_MINUS2);
2125                 tssi_bounds[3] = rt2x00_get_field16(eeprom,
2126                                         EEPROM_TSSI_BOUND_A2_MINUS1);
2127
2128                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A3, &eeprom);
2129                 tssi_bounds[4] = rt2x00_get_field16(eeprom,
2130                                         EEPROM_TSSI_BOUND_A3_REF);
2131                 tssi_bounds[5] = rt2x00_get_field16(eeprom,
2132                                         EEPROM_TSSI_BOUND_A3_PLUS1);
2133
2134                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A4, &eeprom);
2135                 tssi_bounds[6] = rt2x00_get_field16(eeprom,
2136                                         EEPROM_TSSI_BOUND_A4_PLUS2);
2137                 tssi_bounds[7] = rt2x00_get_field16(eeprom,
2138                                         EEPROM_TSSI_BOUND_A4_PLUS3);
2139
2140                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A5, &eeprom);
2141                 tssi_bounds[8] = rt2x00_get_field16(eeprom,
2142                                         EEPROM_TSSI_BOUND_A5_PLUS4);
2143
2144                 step = rt2x00_get_field16(eeprom,
2145                                           EEPROM_TSSI_BOUND_A5_AGC_STEP);
2146         }
2147
2148         /*
2149          * Check if temperature compensation is supported.
2150          */
2151         if (tssi_bounds[4] == 0xff)
2152                 return 0;
2153
2154         /*
2155          * Read current TSSI (BBP 49).
2156          */
2157         rt2800_bbp_read(rt2x00dev, 49, &current_tssi);
2158
2159         /*
2160          * Compare TSSI value (BBP49) with the compensation boundaries
2161          * from the EEPROM and increase or decrease tx power.
2162          */
2163         for (i = 0; i <= 3; i++) {
2164                 if (current_tssi > tssi_bounds[i])
2165                         break;
2166         }
2167
2168         if (i == 4) {
2169                 for (i = 8; i >= 5; i--) {
2170                         if (current_tssi < tssi_bounds[i])
2171                                 break;
2172                 }
2173         }
2174
2175         return (i - 4) * step;
2176 }
2177
2178 static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
2179                                       enum ieee80211_band band)
2180 {
2181         u16 eeprom;
2182         u8 comp_en;
2183         u8 comp_type;
2184         int comp_value = 0;
2185
2186         rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA, &eeprom);
2187
2188         /*
2189          * HT40 compensation not required.
2190          */
2191         if (eeprom == 0xffff ||
2192             !test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
2193                 return 0;
2194
2195         if (band == IEEE80211_BAND_2GHZ) {
2196                 comp_en = rt2x00_get_field16(eeprom,
2197                                  EEPROM_TXPOWER_DELTA_ENABLE_2G);
2198                 if (comp_en) {
2199                         comp_type = rt2x00_get_field16(eeprom,
2200                                            EEPROM_TXPOWER_DELTA_TYPE_2G);
2201                         comp_value = rt2x00_get_field16(eeprom,
2202                                             EEPROM_TXPOWER_DELTA_VALUE_2G);
2203                         if (!comp_type)
2204                                 comp_value = -comp_value;
2205                 }
2206         } else {
2207                 comp_en = rt2x00_get_field16(eeprom,
2208                                  EEPROM_TXPOWER_DELTA_ENABLE_5G);
2209                 if (comp_en) {
2210                         comp_type = rt2x00_get_field16(eeprom,
2211                                            EEPROM_TXPOWER_DELTA_TYPE_5G);
2212                         comp_value = rt2x00_get_field16(eeprom,
2213                                             EEPROM_TXPOWER_DELTA_VALUE_5G);
2214                         if (!comp_type)
2215                                 comp_value = -comp_value;
2216                 }
2217         }
2218
2219         return comp_value;
2220 }
2221
2222 static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
2223                                    enum ieee80211_band band, int power_level,
2224                                    u8 txpower, int delta)
2225 {
2226         u32 reg;
2227         u16 eeprom;
2228         u8 criterion;
2229         u8 eirp_txpower;
2230         u8 eirp_txpower_criterion;
2231         u8 reg_limit;
2232
2233         if (!((band == IEEE80211_BAND_5GHZ) && is_rate_b))
2234                 return txpower;
2235
2236         if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags)) {
2237                 /*
2238                  * Check if eirp txpower exceed txpower_limit.
2239                  * We use OFDM 6M as criterion and its eirp txpower
2240                  * is stored at EEPROM_EIRP_MAX_TX_POWER.
2241                  * .11b data rate need add additional 4dbm
2242                  * when calculating eirp txpower.
2243                  */
2244                 rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
2245                 criterion = rt2x00_get_field32(reg, TX_PWR_CFG_0_6MBS);
2246
2247                 rt2x00_eeprom_read(rt2x00dev,
2248                                    EEPROM_EIRP_MAX_TX_POWER, &eeprom);
2249
2250                 if (band == IEEE80211_BAND_2GHZ)
2251                         eirp_txpower_criterion = rt2x00_get_field16(eeprom,
2252                                                  EEPROM_EIRP_MAX_TX_POWER_2GHZ);
2253                 else
2254                         eirp_txpower_criterion = rt2x00_get_field16(eeprom,
2255                                                  EEPROM_EIRP_MAX_TX_POWER_5GHZ);
2256
2257                 eirp_txpower = eirp_txpower_criterion + (txpower - criterion) +
2258                                (is_rate_b ? 4 : 0) + delta;
2259
2260                 reg_limit = (eirp_txpower > power_level) ?
2261                                         (eirp_txpower - power_level) : 0;
2262         } else
2263                 reg_limit = 0;
2264
2265         return txpower + delta - reg_limit;
2266 }
2267
2268 static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
2269                                   enum ieee80211_band band,
2270                                   int power_level)
2271 {
2272         u8 txpower;
2273         u16 eeprom;
2274         int i, is_rate_b;
2275         u32 reg;
2276         u8 r1;
2277         u32 offset;
2278         int delta;
2279
2280         /*
2281          * Calculate HT40 compensation delta
2282          */
2283         delta = rt2800_get_txpower_bw_comp(rt2x00dev, band);
2284
2285         /*
2286          * calculate temperature compensation delta
2287          */
2288         delta += rt2800_get_gain_calibration_delta(rt2x00dev);
2289
2290         /*
2291          * set to normal bbp tx power control mode: +/- 0dBm
2292          */
2293         rt2800_bbp_read(rt2x00dev, 1, &r1);
2294         rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, 0);
2295         rt2800_bbp_write(rt2x00dev, 1, r1);
2296         offset = TX_PWR_CFG_0;
2297
2298         for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) {
2299                 /* just to be safe */
2300                 if (offset > TX_PWR_CFG_4)
2301                         break;
2302
2303                 rt2800_register_read(rt2x00dev, offset, &reg);
2304
2305                 /* read the next four txpower values */
2306                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_BYRATE + i,
2307                                    &eeprom);
2308
2309                 is_rate_b = i ? 0 : 1;
2310                 /*
2311                  * TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS,
2312                  * TX_PWR_CFG_2: MCS4, TX_PWR_CFG_3: MCS12,
2313                  * TX_PWR_CFG_4: unknown
2314                  */
2315                 txpower = rt2x00_get_field16(eeprom,
2316                                              EEPROM_TXPOWER_BYRATE_RATE0);
2317                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
2318                                              power_level, txpower, delta);
2319                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE0, txpower);
2320
2321                 /*
2322                  * TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS,
2323                  * TX_PWR_CFG_2: MCS5, TX_PWR_CFG_3: MCS13,
2324                  * TX_PWR_CFG_4: unknown
2325                  */
2326                 txpower = rt2x00_get_field16(eeprom,
2327                                              EEPROM_TXPOWER_BYRATE_RATE1);
2328                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
2329                                              power_level, txpower, delta);
2330                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE1, txpower);
2331
2332                 /*
2333                  * TX_PWR_CFG_0: 5.5MBS, TX_PWR_CFG_1: 48MBS,
2334                  * TX_PWR_CFG_2: MCS6,  TX_PWR_CFG_3: MCS14,
2335                  * TX_PWR_CFG_4: unknown
2336                  */
2337                 txpower = rt2x00_get_field16(eeprom,
2338                                              EEPROM_TXPOWER_BYRATE_RATE2);
2339                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
2340                                              power_level, txpower, delta);
2341                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE2, txpower);
2342
2343                 /*
2344                  * TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS,
2345                  * TX_PWR_CFG_2: MCS7,  TX_PWR_CFG_3: MCS15,
2346                  * TX_PWR_CFG_4: unknown
2347                  */
2348                 txpower = rt2x00_get_field16(eeprom,
2349                                              EEPROM_TXPOWER_BYRATE_RATE3);
2350                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
2351                                              power_level, txpower, delta);
2352                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE3, txpower);
2353
2354                 /* read the next four txpower values */
2355                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_BYRATE + i + 1,
2356                                    &eeprom);
2357
2358                 is_rate_b = 0;
2359                 /*
2360                  * TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0,
2361                  * TX_PWR_CFG_2: MCS8, TX_PWR_CFG_3: unknown,
2362                  * TX_PWR_CFG_4: unknown
2363                  */
2364                 txpower = rt2x00_get_field16(eeprom,
2365                                              EEPROM_TXPOWER_BYRATE_RATE0);
2366                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
2367                                              power_level, txpower, delta);
2368                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE4, txpower);
2369
2370                 /*
2371                  * TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1,
2372                  * TX_PWR_CFG_2: MCS9, TX_PWR_CFG_3: unknown,
2373                  * TX_PWR_CFG_4: unknown
2374                  */
2375                 txpower = rt2x00_get_field16(eeprom,
2376                                              EEPROM_TXPOWER_BYRATE_RATE1);
2377                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
2378                                              power_level, txpower, delta);
2379                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE5, txpower);
2380
2381                 /*
2382                  * TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2,
2383                  * TX_PWR_CFG_2: MCS10, TX_PWR_CFG_3: unknown,
2384                  * TX_PWR_CFG_4: unknown
2385                  */
2386                 txpower = rt2x00_get_field16(eeprom,
2387                                              EEPROM_TXPOWER_BYRATE_RATE2);
2388                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
2389                                              power_level, txpower, delta);
2390                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE6, txpower);
2391
2392                 /*
2393                  * TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3,
2394                  * TX_PWR_CFG_2: MCS11, TX_PWR_CFG_3: unknown,
2395                  * TX_PWR_CFG_4: unknown
2396                  */
2397                 txpower = rt2x00_get_field16(eeprom,
2398                                              EEPROM_TXPOWER_BYRATE_RATE3);
2399                 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
2400                                              power_level, txpower, delta);
2401                 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE7, txpower);
2402
2403                 rt2800_register_write(rt2x00dev, offset, reg);
2404
2405                 /* next TX_PWR_CFG register */
2406                 offset += 4;
2407         }
2408 }
2409
2410 void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev)
2411 {
2412         rt2800_config_txpower(rt2x00dev, rt2x00dev->curr_band,
2413                               rt2x00dev->tx_power);
2414 }
2415 EXPORT_SYMBOL_GPL(rt2800_gain_calibration);
2416
2417 static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
2418                                       struct rt2x00lib_conf *libconf)
2419 {
2420         u32 reg;
2421
2422         rt2800_register_read(rt2x00dev, TX_RTY_CFG, &reg);
2423         rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
2424                            libconf->conf->short_frame_max_tx_count);
2425         rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
2426                            libconf->conf->long_frame_max_tx_count);
2427         rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
2428 }
2429
2430 static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev,
2431                              struct rt2x00lib_conf *libconf)
2432 {
2433         enum dev_state state =
2434             (libconf->conf->flags & IEEE80211_CONF_PS) ?
2435                 STATE_SLEEP : STATE_AWAKE;
2436         u32 reg;
2437
2438         if (state == STATE_SLEEP) {
2439                 rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
2440
2441                 rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
2442                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
2443                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
2444                                    libconf->conf->listen_interval - 1);
2445                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
2446                 rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
2447
2448                 rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
2449         } else {
2450                 rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
2451                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
2452                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
2453                 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
2454                 rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
2455
2456                 rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
2457         }
2458 }
2459
2460 void rt2800_config(struct rt2x00_dev *rt2x00dev,
2461                    struct rt2x00lib_conf *libconf,
2462                    const unsigned int flags)
2463 {
2464         /* Always recalculate LNA gain before changing configuration */
2465         rt2800_config_lna_gain(rt2x00dev, libconf);
2466
2467         if (flags & IEEE80211_CONF_CHANGE_CHANNEL) {
2468                 rt2800_config_channel(rt2x00dev, libconf->conf,
2469                                       &libconf->rf, &libconf->channel);
2470                 rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band,
2471                                       libconf->conf->power_level);
2472         }
2473         if (flags & IEEE80211_CONF_CHANGE_POWER)
2474                 rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band,
2475                                       libconf->conf->power_level);
2476         if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
2477                 rt2800_config_retry_limit(rt2x00dev, libconf);
2478         if (flags & IEEE80211_CONF_CHANGE_PS)
2479                 rt2800_config_ps(rt2x00dev, libconf);
2480 }
2481 EXPORT_SYMBOL_GPL(rt2800_config);
2482
2483 /*
2484  * Link tuning
2485  */
2486 void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
2487 {
2488         u32 reg;
2489
2490         /*
2491          * Update FCS error count from register.
2492          */
2493         rt2800_register_read(rt2x00dev, RX_STA_CNT0, &reg);
2494         qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
2495 }
2496 EXPORT_SYMBOL_GPL(rt2800_link_stats);
2497
2498 static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
2499 {
2500         if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
2501                 if (rt2x00_rt(rt2x00dev, RT3070) ||
2502                     rt2x00_rt(rt2x00dev, RT3071) ||
2503                     rt2x00_rt(rt2x00dev, RT3090) ||
2504                     rt2x00_rt(rt2x00dev, RT3390) ||
2505                     rt2x00_rt(rt2x00dev, RT5390))
2506                         return 0x1c + (2 * rt2x00dev->lna_gain);
2507                 else
2508                         return 0x2e + rt2x00dev->lna_gain;
2509         }
2510
2511         if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
2512                 return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
2513         else
2514                 return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
2515 }
2516
2517 static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev,
2518                                   struct link_qual *qual, u8 vgc_level)
2519 {
2520         if (qual->vgc_level != vgc_level) {
2521                 rt2800_bbp_write(rt2x00dev, 66, vgc_level);
2522                 qual->vgc_level = vgc_level;
2523                 qual->vgc_level_reg = vgc_level;
2524         }
2525 }
2526
2527 void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
2528 {
2529         rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev));
2530 }
2531 EXPORT_SYMBOL_GPL(rt2800_reset_tuner);
2532
2533 void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
2534                        const u32 count)
2535 {
2536         if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C))
2537                 return;
2538
2539         /*
2540          * When RSSI is better then -80 increase VGC level with 0x10
2541          */
2542         rt2800_set_vgc(rt2x00dev, qual,
2543                        rt2800_get_default_vgc(rt2x00dev) +
2544                        ((qual->rssi > -80) * 0x10));
2545 }
2546 EXPORT_SYMBOL_GPL(rt2800_link_tuner);
2547
2548 /*
2549  * Initialization functions.
2550  */
2551 static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
2552 {
2553         u32 reg;
2554         u16 eeprom;
2555         unsigned int i;
2556         int ret;
2557
2558         rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
2559         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
2560         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
2561         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
2562         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
2563         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
2564         rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
2565
2566         ret = rt2800_drv_init_registers(rt2x00dev);
2567         if (ret)
2568                 return ret;
2569
2570         rt2800_register_read(rt2x00dev, BCN_OFFSET0, &reg);
2571         rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
2572         rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
2573         rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
2574         rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
2575         rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg);
2576
2577         rt2800_register_read(rt2x00dev, BCN_OFFSET1, &reg);
2578         rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
2579         rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
2580         rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
2581         rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
2582         rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg);
2583
2584         rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
2585         rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
2586
2587         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
2588
2589         rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
2590         rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 1600);
2591         rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
2592         rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
2593         rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
2594         rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
2595         rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
2596         rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
2597
2598         rt2800_config_filter(rt2x00dev, FIF_ALLMULTI);
2599
2600         rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
2601         rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, 9);
2602         rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
2603         rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
2604
2605         if (rt2x00_rt(rt2x00dev, RT3071) ||
2606             rt2x00_rt(rt2x00dev, RT3090) ||
2607             rt2x00_rt(rt2x00dev, RT3390)) {
2608                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
2609                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
2610                 if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
2611                     rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
2612                     rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
2613                         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
2614                         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
2615                                 rt2800_register_write(rt2x00dev, TX_SW_CFG2,
2616                                                       0x0000002c);
2617                         else
2618                                 rt2800_register_write(rt2x00dev, TX_SW_CFG2,
2619                                                       0x0000000f);
2620                 } else {
2621                         rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
2622                 }
2623         } else if (rt2x00_rt(rt2x00dev, RT3070)) {
2624                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
2625
2626                 if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
2627                         rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
2628                         rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000002c);
2629                 } else {
2630                         rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
2631                         rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
2632                 }
2633         } else if (rt2800_is_305x_soc(rt2x00dev)) {
2634                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
2635                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
2636                 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000030);
2637         } else if (rt2x00_rt(rt2x00dev, RT3572)) {
2638                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
2639                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
2640         } else if (rt2x00_rt(rt2x00dev, RT5390)) {
2641                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
2642                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
2643                 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
2644         } else {
2645                 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
2646                 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
2647         }
2648
2649         rt2800_register_read(rt2x00dev, TX_LINK_CFG, &reg);
2650         rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
2651         rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
2652         rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
2653         rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
2654         rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
2655         rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
2656         rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
2657         rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
2658         rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg);
2659
2660         rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
2661         rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
2662         rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 32);
2663         rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
2664         rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
2665
2666         rt2800_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
2667         rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
2668         if (rt2x00_rt_rev_gte(rt2x00dev, RT2872, REV_RT2872E) ||
2669             rt2x00_rt(rt2x00dev, RT2883) ||
2670             rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070E))
2671                 rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
2672         else
2673                 rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
2674         rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
2675         rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
2676         rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg);
2677
2678         rt2800_register_read(rt2x00dev, LED_CFG, &reg);
2679         rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, 70);
2680         rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, 30);
2681         rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
2682         rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
2683         rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 3);
2684         rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
2685         rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
2686         rt2800_register_write(rt2x00dev, LED_CFG, reg);
2687
2688         rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
2689
2690         rt2800_register_read(rt2x00dev, TX_RTY_CFG, &reg);
2691         rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT, 15);
2692         rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT, 31);
2693         rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
2694         rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
2695         rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
2696         rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
2697         rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
2698
2699         rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
2700         rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
2701         rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY, 1);
2702         rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
2703         rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
2704         rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE, 1);
2705         rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
2706         rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
2707         rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
2708
2709         rt2800_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
2710         rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 3);
2711         rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
2712         rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV_SHORT, 1);
2713         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
2714         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
2715         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
2716         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 0);
2717         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
2718         rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 0);
2719         rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, 1);
2720         rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
2721
2722         rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
2723         rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 3);
2724         rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
2725         rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV_SHORT, 1);
2726         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
2727         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
2728         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
2729         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 0);
2730         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
2731         rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 0);
2732         rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, 1);
2733         rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
2734
2735         rt2800_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
2736         rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
2737         rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
2738         rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV_SHORT, 1);
2739         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
2740         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
2741         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
2742         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
2743         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
2744         rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
2745         rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, 0);
2746         rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
2747
2748         rt2800_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
2749         rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
2750         rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
2751         rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV_SHORT, 1);
2752         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
2753         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
2754         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
2755         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
2756         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
2757         rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
2758         rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, 0);
2759         rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
2760
2761         rt2800_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
2762         rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
2763         rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
2764         rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV_SHORT, 1);
2765         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
2766         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
2767         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
2768         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
2769         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
2770         rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
2771         rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, 0);
2772         rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
2773
2774         rt2800_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
2775         rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
2776         rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
2777         rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV_SHORT, 1);
2778         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
2779         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
2780         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
2781         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
2782         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
2783         rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
2784         rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, 0);
2785         rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
2786
2787         if (rt2x00_is_usb(rt2x00dev)) {
2788                 rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
2789
2790                 rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
2791                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
2792                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
2793                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
2794                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
2795                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
2796                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
2797                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
2798                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
2799                 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
2800                 rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
2801         }
2802
2803         /*
2804          * The legacy driver also sets TXOP_CTRL_CFG_RESERVED_TRUN_EN to 1
2805          * although it is reserved.
2806          */
2807         rt2800_register_read(rt2x00dev, TXOP_CTRL_CFG, &reg);
2808         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_TIMEOUT_TRUN_EN, 1);
2809         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_AC_TRUN_EN, 1);
2810         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN, 1);
2811         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_USER_MODE_TRUN_EN, 1);
2812         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_MIMO_PS_TRUN_EN, 1);
2813         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_RESERVED_TRUN_EN, 1);
2814         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_LSIG_TXOP_EN, 0);
2815         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CCA_EN, 0);
2816         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CCA_DLY, 88);
2817         rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CWMIN, 0);
2818         rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, reg);
2819
2820         rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
2821
2822         rt2800_register_read(rt2x00dev, TX_RTS_CFG, &reg);
2823         rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
2824         rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
2825                            IEEE80211_MAX_RTS_THRESHOLD);
2826         rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
2827         rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
2828
2829         rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
2830
2831         /*
2832          * Usually the CCK SIFS time should be set to 10 and the OFDM SIFS
2833          * time should be set to 16. However, the original Ralink driver uses
2834          * 16 for both and indeed using a value of 10 for CCK SIFS results in
2835          * connection problems with 11g + CTS protection. Hence, use the same
2836          * defaults as the Ralink driver: 16 for both, CCK and OFDM SIFS.
2837          */
2838         rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
2839         rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, 16);
2840         rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, 16);
2841         rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
2842         rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, 314);
2843         rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
2844         rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
2845
2846         rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
2847
2848         /*
2849          * ASIC will keep garbage value after boot, clear encryption keys.
2850          */
2851         for (i = 0; i < 4; i++)
2852                 rt2800_register_write(rt2x00dev,
2853                                          SHARED_KEY_MODE_ENTRY(i), 0);
2854
2855         for (i = 0; i < 256; i++) {
2856                 rt2800_config_wcid(rt2x00dev, NULL, i);
2857                 rt2800_delete_wcid_attr(rt2x00dev, i);
2858                 rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
2859         }
2860
2861         /*
2862          * Clear all beacons
2863          */
2864         rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE0);
2865         rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE1);
2866         rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE2);
2867         rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE3);
2868         rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE4);
2869         rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE5);
2870         rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE6);
2871         rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE7);
2872
2873         if (rt2x00_is_usb(rt2x00dev)) {
2874                 rt2800_register_read(rt2x00dev, US_CYC_CNT, &reg);
2875                 rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 30);
2876                 rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
2877         } else if (rt2x00_is_pcie(rt2x00dev)) {
2878                 rt2800_register_read(rt2x00dev, US_CYC_CNT, &reg);
2879                 rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 125);
2880                 rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
2881         }
2882
2883         rt2800_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
2884         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
2885         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
2886         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
2887         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
2888         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
2889         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
2890         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
2891         rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
2892         rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg);
2893
2894         rt2800_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
2895         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
2896         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
2897         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
2898         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
2899         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
2900         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
2901         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
2902         rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
2903         rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg);
2904
2905         rt2800_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
2906         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
2907         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
2908         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 9);
2909         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
2910         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
2911         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
2912         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
2913         rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
2914         rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg);
2915
2916         rt2800_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
2917         rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
2918         rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
2919         rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
2920         rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
2921         rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg);
2922
2923         /*
2924          * Do not force the BA window size, we use the TXWI to set it
2925          */
2926         rt2800_register_read(rt2x00dev, AMPDU_BA_WINSIZE, &reg);
2927         rt2x00_set_field32(&reg, AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE, 0);
2928         rt2x00_set_field32(&reg, AMPDU_BA_WINSIZE_FORCE_WINSIZE, 0);
2929         rt2800_register_write(rt2x00dev, AMPDU_BA_WINSIZE, reg);
2930
2931         /*
2932          * We must clear the error counters.
2933          * These registers are cleared on read,
2934          * so we may pass a useless variable to store the value.
2935          */
2936         rt2800_register_read(rt2x00dev, RX_STA_CNT0, &reg);
2937         rt2800_register_read(rt2x00dev, RX_STA_CNT1, &reg);
2938         rt2800_register_read(rt2x00dev, RX_STA_CNT2, &reg);
2939         rt2800_register_read(rt2x00dev, TX_STA_CNT0, &reg);
2940         rt2800_register_read(rt2x00dev, TX_STA_CNT1, &reg);
2941         rt2800_register_read(rt2x00dev, TX_STA_CNT2, &reg);
2942
2943         /*
2944          * Setup leadtime for pre tbtt interrupt to 6ms
2945          */
2946         rt2800_register_read(rt2x00dev, INT_TIMER_CFG, &reg);
2947         rt2x00_set_field32(&reg, INT_TIMER_CFG_PRE_TBTT_TIMER, 6 << 4);
2948         rt2800_register_write(rt2x00dev, INT_TIMER_CFG, reg);
2949
2950         /*
2951          * Set up channel statistics timer
2952          */
2953         rt2800_register_read(rt2x00dev, CH_TIME_CFG, &reg);
2954         rt2x00_set_field32(&reg, CH_TIME_CFG_EIFS_BUSY, 1);
2955         rt2x00_set_field32(&reg, CH_TIME_CFG_NAV_BUSY, 1);
2956         rt2x00_set_field32(&reg, CH_TIME_CFG_RX_BUSY, 1);
2957         rt2x00_set_field32(&reg, CH_TIME_CFG_TX_BUSY, 1);
2958         rt2x00_set_field32(&reg, CH_TIME_CFG_TMR_EN, 1);
2959         rt2800_register_write(rt2x00dev, CH_TIME_CFG, reg);
2960
2961         return 0;
2962 }
2963
2964 static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
2965 {
2966         unsigned int i;
2967         u32 reg;
2968
2969         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
2970                 rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
2971                 if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
2972                         return 0;
2973
2974                 udelay(REGISTER_BUSY_DELAY);
2975         }
2976
2977         ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
2978         return -EACCES;
2979 }
2980
2981 static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
2982 {
2983         unsigned int i;
2984         u8 value;
2985
2986         /*
2987          * BBP was enabled after firmware was loaded,
2988          * but we need to reactivate it now.
2989          */
2990         rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
2991         rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
2992         msleep(1);
2993
2994         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
2995                 rt2800_bbp_read(rt2x00dev, 0, &value);
2996                 if ((value != 0xff) && (value != 0x00))
2997                         return 0;
2998                 udelay(REGISTER_BUSY_DELAY);
2999         }
3000
3001         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
3002         return -EACCES;
3003 }
3004
3005 static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
3006 {
3007         unsigned int i;
3008         u16 eeprom;
3009         u8 reg_id;
3010         u8 value;
3011
3012         if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev) ||
3013                      rt2800_wait_bbp_ready(rt2x00dev)))
3014                 return -EACCES;
3015
3016         if (rt2x00_rt(rt2x00dev, RT5390)) {
3017                 rt2800_bbp_read(rt2x00dev, 4, &value);
3018                 rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1);
3019                 rt2800_bbp_write(rt2x00dev, 4, value);
3020         }
3021
3022         if (rt2800_is_305x_soc(rt2x00dev) ||
3023             rt2x00_rt(rt2x00dev, RT3572) ||
3024             rt2x00_rt(rt2x00dev, RT5390))
3025                 rt2800_bbp_write(rt2x00dev, 31, 0x08);
3026
3027         rt2800_bbp_write(rt2x00dev, 65, 0x2c);
3028         rt2800_bbp_write(rt2x00dev, 66, 0x38);
3029
3030         if (rt2x00_rt(rt2x00dev, RT5390))
3031                 rt2800_bbp_write(rt2x00dev, 68, 0x0b);
3032
3033         if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
3034                 rt2800_bbp_write(rt2x00dev, 69, 0x16);
3035                 rt2800_bbp_write(rt2x00dev, 73, 0x12);
3036         } else if (rt2x00_rt(rt2x00dev, RT5390)) {
3037                 rt2800_bbp_write(rt2x00dev, 69, 0x12);
3038                 rt2800_bbp_write(rt2x00dev, 73, 0x13);
3039                 rt2800_bbp_write(rt2x00dev, 75, 0x46);
3040                 rt2800_bbp_write(rt2x00dev, 76, 0x28);
3041                 rt2800_bbp_write(rt2x00dev, 77, 0x59);
3042         } else {
3043                 rt2800_bbp_write(rt2x00dev, 69, 0x12);
3044                 rt2800_bbp_write(rt2x00dev, 73, 0x10);
3045         }
3046
3047         rt2800_bbp_write(rt2x00dev, 70, 0x0a);
3048
3049         if (rt2x00_rt(rt2x00dev, RT3070) ||
3050             rt2x00_rt(rt2x00dev, RT3071) ||
3051             rt2x00_rt(rt2x00dev, RT3090) ||
3052             rt2x00_rt(rt2x00dev, RT3390) ||
3053             rt2x00_rt(rt2x00dev, RT3572) ||
3054             rt2x00_rt(rt2x00dev, RT5390)) {
3055                 rt2800_bbp_write(rt2x00dev, 79, 0x13);
3056                 rt2800_bbp_write(rt2x00dev, 80, 0x05);
3057                 rt2800_bbp_write(rt2x00dev, 81, 0x33);
3058         } else if (rt2800_is_305x_soc(rt2x00dev)) {
3059                 rt2800_bbp_write(rt2x00dev, 78, 0x0e);
3060                 rt2800_bbp_write(rt2x00dev, 80, 0x08);
3061         } else {
3062                 rt2800_bbp_write(rt2x00dev, 81, 0x37);
3063         }
3064
3065         rt2800_bbp_write(rt2x00dev, 82, 0x62);
3066         if (rt2x00_rt(rt2x00dev, RT5390))
3067                 rt2800_bbp_write(rt2x00dev, 83, 0x7a);
3068         else
3069                 rt2800_bbp_write(rt2x00dev, 83, 0x6a);
3070
3071         if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D))
3072                 rt2800_bbp_write(rt2x00dev, 84, 0x19);
3073         else if (rt2x00_rt(rt2x00dev, RT5390))
3074                 rt2800_bbp_write(rt2x00dev, 84, 0x9a);
3075         else
3076                 rt2800_bbp_write(rt2x00dev, 84, 0x99);
3077
3078         if (rt2x00_rt(rt2x00dev, RT5390))
3079                 rt2800_bbp_write(rt2x00dev, 86, 0x38);
3080         else
3081                 rt2800_bbp_write(rt2x00dev, 86, 0x00);
3082
3083         rt2800_bbp_write(rt2x00dev, 91, 0x04);
3084
3085         if (rt2x00_rt(rt2x00dev, RT5390))
3086                 rt2800_bbp_write(rt2x00dev, 92, 0x02);
3087         else
3088                 rt2800_bbp_write(rt2x00dev, 92, 0x00);
3089
3090         if (rt2x00_rt_rev_gte(rt2x00dev, RT3070, REV_RT3070F) ||
3091             rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) ||
3092             rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E) ||
3093             rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E) ||
3094             rt2x00_rt(rt2x00dev, RT3572) ||
3095             rt2x00_rt(rt2x00dev, RT5390) ||
3096             rt2800_is_305x_soc(rt2x00dev))
3097                 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
3098         else
3099                 rt2800_bbp_write(rt2x00dev, 103, 0x00);
3100
3101         if (rt2x00_rt(rt2x00dev, RT5390))
3102                 rt2800_bbp_write(rt2x00dev, 104, 0x92);
3103
3104         if (rt2800_is_305x_soc(rt2x00dev))
3105                 rt2800_bbp_write(rt2x00dev, 105, 0x01);
3106         else if (rt2x00_rt(rt2x00dev, RT5390))
3107                 rt2800_bbp_write(rt2x00dev, 105, 0x3c);
3108         else
3109                 rt2800_bbp_write(rt2x00dev, 105, 0x05);
3110
3111         if (rt2x00_rt(rt2x00dev, RT5390))
3112                 rt2800_bbp_write(rt2x00dev, 106, 0x03);
3113         else
3114                 rt2800_bbp_write(rt2x00dev, 106, 0x35);
3115
3116         if (rt2x00_rt(rt2x00dev, RT5390))
3117                 rt2800_bbp_write(rt2x00dev, 128, 0x12);
3118
3119         if (rt2x00_rt(rt2x00dev, RT3071) ||
3120             rt2x00_rt(rt2x00dev, RT3090) ||
3121             rt2x00_rt(rt2x00dev, RT3390) ||
3122             rt2x00_rt(rt2x00dev, RT3572) ||
3123             rt2x00_rt(rt2x00dev, RT5390)) {
3124                 rt2800_bbp_read(rt2x00dev, 138, &value);
3125
3126                 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
3127                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
3128                         value |= 0x20;
3129                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
3130                         value &= ~0x02;
3131
3132                 rt2800_bbp_write(rt2x00dev, 138, value);
3133         }
3134
3135         if (rt2x00_rt(rt2x00dev, RT5390)) {
3136                 int ant, div_mode;
3137
3138                 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
3139                 div_mode = rt2x00_get_field16(eeprom,
3140                                               EEPROM_NIC_CONF1_ANT_DIVERSITY);
3141                 ant = (div_mode == 3) ? 1 : 0;
3142
3143                 /* check if this is a Bluetooth combo card */
3144                 if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
3145                         u32 reg;
3146
3147                         rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
3148                         rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT3, 0);
3149                         rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT6, 0);
3150                         rt2x00_set_field32(&reg, GPIO_CTRL_CFG_BIT3, 0);
3151                         rt2x00_set_field32(&reg, GPIO_CTRL_CFG_BIT6, 0);
3152                         if (ant == 0)
3153                                 rt2x00_set_field32(&reg, GPIO_CTRL_CFG_BIT3, 1);
3154                         else if (ant == 1)
3155                                 rt2x00_set_field32(&reg, GPIO_CTRL_CFG_BIT6, 1);
3156                         rt2800_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
3157                 }
3158
3159                 rt2800_bbp_read(rt2x00dev, 152, &value);
3160                 if (ant == 0)
3161                         rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1);
3162                 else
3163                         rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0);
3164                 rt2800_bbp_write(rt2x00dev, 152, value);
3165
3166                 /* Init frequency calibration */
3167                 rt2800_bbp_write(rt2x00dev, 142, 1);
3168                 rt2800_bbp_write(rt2x00dev, 143, 57);
3169         }
3170
3171         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
3172                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
3173
3174                 if (eeprom != 0xffff && eeprom != 0x0000) {
3175                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
3176                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
3177                         rt2800_bbp_write(rt2x00dev, reg_id, value);
3178                 }
3179         }
3180
3181         return 0;
3182 }
3183
3184 static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
3185                                 bool bw40, u8 rfcsr24, u8 filter_target)
3186 {
3187         unsigned int i;
3188         u8 bbp;
3189         u8 rfcsr;
3190         u8 passband;
3191         u8 stopband;
3192         u8 overtuned = 0;
3193
3194         rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
3195
3196         rt2800_bbp_read(rt2x00dev, 4, &bbp);
3197         rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
3198         rt2800_bbp_write(rt2x00dev, 4, bbp);
3199
3200         rt2800_rfcsr_read(rt2x00dev, 31, &rfcsr);
3201         rt2x00_set_field8(&rfcsr, RFCSR31_RX_H20M, bw40);
3202         rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
3203
3204         rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
3205         rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
3206         rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
3207
3208         /*
3209          * Set power & frequency of passband test tone
3210          */
3211         rt2800_bbp_write(rt2x00dev, 24, 0);
3212
3213         for (i = 0; i < 100; i++) {
3214                 rt2800_bbp_write(rt2x00dev, 25, 0x90);
3215                 msleep(1);
3216
3217                 rt2800_bbp_read(rt2x00dev, 55, &passband);
3218                 if (passband)
3219                         break;
3220         }
3221
3222         /*
3223          * Set power & frequency of stopband test tone
3224          */
3225         rt2800_bbp_write(rt2x00dev, 24, 0x06);
3226
3227         for (i = 0; i < 100; i++) {
3228                 rt2800_bbp_write(rt2x00dev, 25, 0x90);
3229                 msleep(1);
3230
3231                 rt2800_bbp_read(rt2x00dev, 55, &stopband);
3232
3233                 if ((passband - stopband) <= filter_target) {
3234                         rfcsr24++;
3235                         overtuned += ((passband - stopband) == filter_target);
3236                 } else
3237                         break;
3238
3239                 rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
3240         }
3241
3242         rfcsr24 -= !!overtuned;
3243
3244         rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
3245         return rfcsr24;
3246 }
3247
3248 static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
3249 {
3250         u8 rfcsr;
3251         u8 bbp;
3252         u32 reg;
3253         u16 eeprom;
3254
3255         if (!rt2x00_rt(rt2x00dev, RT3070) &&
3256             !rt2x00_rt(rt2x00dev, RT3071) &&
3257             !rt2x00_rt(rt2x00dev, RT3090) &&
3258             !rt2x00_rt(rt2x00dev, RT3390) &&
3259             !rt2x00_rt(rt2x00dev, RT3572) &&
3260             !rt2x00_rt(rt2x00dev, RT5390) &&
3261             !rt2800_is_305x_soc(rt2x00dev))
3262                 return 0;
3263
3264         /*
3265          * Init RF calibration.
3266          */
3267         if (rt2x00_rt(rt2x00dev, RT5390)) {
3268                 rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr);
3269                 rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
3270                 rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
3271                 msleep(1);
3272                 rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 0);
3273                 rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
3274         } else {
3275                 rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
3276                 rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
3277                 rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
3278                 msleep(1);
3279                 rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
3280                 rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
3281         }
3282
3283         if (rt2x00_rt(rt2x00dev, RT3070) ||
3284             rt2x00_rt(rt2x00dev, RT3071) ||
3285             rt2x00_rt(rt2x00dev, RT3090)) {
3286                 rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
3287                 rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
3288                 rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
3289                 rt2800_rfcsr_write(rt2x00dev, 7, 0x60);
3290                 rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
3291                 rt2800_rfcsr_write(rt2x00dev, 10, 0x41);
3292                 rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
3293                 rt2800_rfcsr_write(rt2x00dev, 12, 0x7b);
3294                 rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
3295                 rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
3296                 rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
3297                 rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
3298                 rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
3299                 rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
3300                 rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
3301                 rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
3302                 rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
3303                 rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
3304                 rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
3305         } else if (rt2x00_rt(rt2x00dev, RT3390)) {
3306                 rt2800_rfcsr_write(rt2x00dev, 0, 0xa0);
3307                 rt2800_rfcsr_write(rt2x00dev, 1, 0xe1);
3308                 rt2800_rfcsr_write(rt2x00dev, 2, 0xf1);
3309                 rt2800_rfcsr_write(rt2x00dev, 3, 0x62);
3310                 rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
3311                 rt2800_rfcsr_write(rt2x00dev, 5, 0x8b);
3312                 rt2800_rfcsr_write(rt2x00dev, 6, 0x42);
3313                 rt2800_rfcsr_write(rt2x00dev, 7, 0x34);
3314                 rt2800_rfcsr_write(rt2x00dev, 8, 0x00);
3315                 rt2800_rfcsr_write(rt2x00dev, 9, 0xc0);
3316                 rt2800_rfcsr_write(rt2x00dev, 10, 0x61);
3317                 rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
3318                 rt2800_rfcsr_write(rt2x00dev, 12, 0x3b);
3319                 rt2800_rfcsr_write(rt2x00dev, 13, 0xe0);
3320                 rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
3321                 rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
3322                 rt2800_rfcsr_write(rt2x00dev, 16, 0xe0);
3323                 rt2800_rfcsr_write(rt2x00dev, 17, 0x94);
3324                 rt2800_rfcsr_write(rt2x00dev, 18, 0x5c);
3325                 rt2800_rfcsr_write(rt2x00dev, 19, 0x4a);
3326                 rt2800_rfcsr_write(rt2x00dev, 20, 0xb2);
3327                 rt2800_rfcsr_write(rt2x00dev, 21, 0xf6);
3328                 rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
3329                 rt2800_rfcsr_write(rt2x00dev, 23, 0x14);
3330                 rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
3331                 rt2800_rfcsr_write(rt2x00dev, 25, 0x3d);
3332                 rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
3333                 rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
3334                 rt2800_rfcsr_write(rt2x00dev, 28, 0x41);
3335                 rt2800_rfcsr_write(rt2x00dev, 29, 0x8f);
3336                 rt2800_rfcsr_write(rt2x00dev, 30, 0x20);
3337                 rt2800_rfcsr_write(rt2x00dev, 31, 0x0f);
3338         } else if (rt2x00_rt(rt2x00dev, RT3572)) {
3339                 rt2800_rfcsr_write(rt2x00dev, 0, 0x70);
3340                 rt2800_rfcsr_write(rt2x00dev, 1, 0x81);
3341                 rt2800_rfcsr_write(rt2x00dev, 2, 0xf1);
3342                 rt2800_rfcsr_write(rt2x00dev, 3, 0x02);
3343                 rt2800_rfcsr_write(rt2x00dev, 4, 0x4c);
3344                 rt2800_rfcsr_write(rt2x00dev, 5, 0x05);
3345                 rt2800_rfcsr_write(rt2x00dev, 6, 0x4a);
3346                 rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
3347                 rt2800_rfcsr_write(rt2x00dev, 9, 0xc3);
3348                 rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
3349                 rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
3350                 rt2800_rfcsr_write(rt2x00dev, 12, 0x70);
3351                 rt2800_rfcsr_write(rt2x00dev, 13, 0x65);
3352                 rt2800_rfcsr_write(rt2x00dev, 14, 0xa0);
3353                 rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
3354                 rt2800_rfcsr_write(rt2x00dev, 16, 0x4c);
3355                 rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
3356                 rt2800_rfcsr_write(rt2x00dev, 18, 0xac);
3357                 rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
3358                 rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
3359                 rt2800_rfcsr_write(rt2x00dev, 21, 0xd0);
3360                 rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
3361                 rt2800_rfcsr_write(rt2x00dev, 23, 0x3c);
3362                 rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
3363                 rt2800_rfcsr_write(rt2x00dev, 25, 0x15);
3364                 rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
3365                 rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
3366                 rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
3367                 rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
3368                 rt2800_rfcsr_write(rt2x00dev, 30, 0x09);
3369                 rt2800_rfcsr_write(rt2x00dev, 31, 0x10);
3370         } else if (rt2800_is_305x_soc(rt2x00dev)) {
3371                 rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
3372                 rt2800_rfcsr_write(rt2x00dev, 1, 0x01);
3373                 rt2800_rfcsr_write(rt2x00dev, 2, 0xf7);
3374                 rt2800_rfcsr_write(rt2x00dev, 3, 0x75);
3375                 rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
3376                 rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
3377                 rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
3378                 rt2800_rfcsr_write(rt2x00dev, 7, 0x50);
3379                 rt2800_rfcsr_write(rt2x00dev, 8, 0x39);
3380                 rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
3381                 rt2800_rfcsr_write(rt2x00dev, 10, 0x60);
3382                 rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
3383                 rt2800_rfcsr_write(rt2x00dev, 12, 0x75);
3384                 rt2800_rfcsr_write(rt2x00dev, 13, 0x75);
3385                 rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
3386                 rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
3387                 rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
3388                 rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
3389                 rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
3390                 rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
3391                 rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
3392                 rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
3393                 rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
3394                 rt2800_rfcsr_write(rt2x00dev, 23, 0x31);
3395                 rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
3396                 rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
3397                 rt2800_rfcsr_write(rt2x00dev, 26, 0x25);
3398                 rt2800_rfcsr_write(rt2x00dev, 27, 0x23);
3399                 rt2800_rfcsr_write(rt2x00dev, 28, 0x13);
3400                 rt2800_rfcsr_write(rt2x00dev, 29, 0x83);
3401                 rt2800_rfcsr_write(rt2x00dev, 30, 0x00);
3402                 rt2800_rfcsr_write(rt2x00dev, 31, 0x00);
3403                 return 0;
3404         } else if (rt2x00_rt(rt2x00dev, RT5390)) {
3405                 rt2800_rfcsr_write(rt2x00dev, 1, 0x0f);
3406                 rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
3407                 rt2800_rfcsr_write(rt2x00dev, 3, 0x88);
3408                 rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
3409                 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
3410                         rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
3411                 else
3412                         rt2800_rfcsr_write(rt2x00dev, 6, 0xa0);
3413                 rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
3414                 rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
3415                 rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
3416                 rt2800_rfcsr_write(rt2x00dev, 12, 0xc6);
3417                 rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
3418                 rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
3419                 rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
3420                 rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
3421                 rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
3422                 rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
3423
3424                 rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
3425                 rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
3426                 rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
3427                 rt2800_rfcsr_write(rt2x00dev, 23, 0x00);
3428                 rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
3429                 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
3430                         rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
3431                 else
3432                         rt2800_rfcsr_write(rt2x00dev, 25, 0xc0);
3433                 rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
3434                 rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
3435                 rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
3436                 rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
3437
3438                 rt2800_rfcsr_write(rt2x00dev, 30, 0x00);
3439                 rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
3440                 rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
3441                 rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
3442                 rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
3443                 rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
3444                 rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
3445                 rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
3446                 rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
3447                 rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
3448
3449                 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
3450                         rt2800_rfcsr_write(rt2x00dev, 40, 0x0b);
3451                 else
3452                         rt2800_rfcsr_write(rt2x00dev, 40, 0x4b);
3453                 rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
3454                 rt2800_rfcsr_write(rt2x00dev, 42, 0xd2);
3455                 rt2800_rfcsr_write(rt2x00dev, 43, 0x9a);
3456                 rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
3457                 rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
3458                 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
3459                         rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
3460                 else
3461                         rt2800_rfcsr_write(rt2x00dev, 46, 0x7b);
3462                 rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
3463                 rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
3464                 rt2800_rfcsr_write(rt2x00dev, 49, 0x94);
3465
3466                 rt2800_rfcsr_write(rt2x00dev, 52, 0x38);
3467                 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
3468                         rt2800_rfcsr_write(rt2x00dev, 53, 0x00);
3469                 else
3470                         rt2800_rfcsr_write(rt2x00dev, 53, 0x84);
3471                 rt2800_rfcsr_write(rt2x00dev, 54, 0x78);
3472                 rt2800_rfcsr_write(rt2x00dev, 55, 0x44);
3473                 rt2800_rfcsr_write(rt2x00dev, 56, 0x22);
3474                 rt2800_rfcsr_write(rt2x00dev, 57, 0x80);
3475                 rt2800_rfcsr_write(rt2x00dev, 58, 0x7f);
3476                 rt2800_rfcsr_write(rt2x00dev, 59, 0x63);
3477
3478                 rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
3479                 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
3480                         rt2800_rfcsr_write(rt2x00dev, 61, 0xd1);
3481                 else
3482                         rt2800_rfcsr_write(rt2x00dev, 61, 0xdd);
3483                 rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
3484                 rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
3485         }
3486
3487         if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
3488                 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
3489                 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
3490                 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
3491                 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
3492         } else if (rt2x00_rt(rt2x00dev, RT3071) ||
3493                    rt2x00_rt(rt2x00dev, RT3090)) {
3494                 rt2800_rfcsr_write(rt2x00dev, 31, 0x14);
3495
3496                 rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
3497                 rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
3498                 rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
3499
3500                 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
3501                 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
3502                 if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
3503                     rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) {
3504                         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
3505                         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
3506                                 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
3507                         else
3508                                 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
3509                 }
3510                 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
3511
3512                 rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
3513                 rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
3514                 rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
3515         } else if (rt2x00_rt(rt2x00dev, RT3390)) {
3516                 rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
3517                 rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
3518                 rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
3519         } else if (rt2x00_rt(rt2x00dev, RT3572)) {
3520                 rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
3521                 rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
3522                 rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
3523
3524                 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
3525                 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
3526                 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
3527                 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
3528                 msleep(1);
3529                 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
3530                 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
3531                 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
3532         }
3533
3534         /*
3535          * Set RX Filter calibration for 20MHz and 40MHz
3536          */
3537         if (rt2x00_rt(rt2x00dev, RT3070)) {
3538                 rt2x00dev->calibration[0] =
3539                         rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
3540                 rt2x00dev->calibration[1] =
3541                         rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
3542         } else if (rt2x00_rt(rt2x00dev, RT3071) ||
3543                    rt2x00_rt(rt2x00dev, RT3090) ||
3544                    rt2x00_rt(rt2x00dev, RT3390) ||
3545                    rt2x00_rt(rt2x00dev, RT3572)) {
3546                 rt2x00dev->calibration[0] =
3547                         rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x13);
3548                 rt2x00dev->calibration[1] =
3549                         rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x15);
3550         }
3551
3552         if (!rt2x00_rt(rt2x00dev, RT5390)) {
3553                 /*
3554                  * Set back to initial state
3555                  */
3556                 rt2800_bbp_write(rt2x00dev, 24, 0);
3557
3558                 rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
3559                 rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
3560                 rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
3561
3562                 /*
3563                  * Set BBP back to BW20
3564                  */
3565                 rt2800_bbp_read(rt2x00dev, 4, &bbp);
3566                 rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
3567                 rt2800_bbp_write(rt2x00dev, 4, bbp);
3568         }
3569
3570         if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) ||
3571             rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
3572             rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
3573             rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E))
3574                 rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
3575
3576         rt2800_register_read(rt2x00dev, OPT_14_CSR, &reg);
3577         rt2x00_set_field32(&reg, OPT_14_CSR_BIT0, 1);
3578         rt2800_register_write(rt2x00dev, OPT_14_CSR, reg);
3579
3580         if (!rt2x00_rt(rt2x00dev, RT5390)) {
3581                 rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
3582                 rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0);
3583                 if (rt2x00_rt(rt2x00dev, RT3070) ||
3584                     rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
3585                     rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
3586                     rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
3587                         if (!test_bit(CAPABILITY_EXTERNAL_LNA_BG,
3588                                       &rt2x00dev->cap_flags))
3589                                 rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
3590                 }
3591                 rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &eeprom);
3592                 if (rt2x00_get_field16(eeprom, EEPROM_TXMIXER_GAIN_BG_VAL) >= 1)
3593                         rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN,
3594                                         rt2x00_get_field16(eeprom,
3595                                                 EEPROM_TXMIXER_GAIN_BG_VAL));
3596                 rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
3597         }
3598
3599         if (rt2x00_rt(rt2x00dev, RT3090)) {
3600                 rt2800_bbp_read(rt2x00dev, 138, &bbp);
3601
3602                 /*  Turn off unused DAC1 and ADC1 to reduce power consumption */
3603                 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
3604                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
3605                         rt2x00_set_field8(&bbp, BBP138_RX_ADC1, 0);
3606                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
3607                         rt2x00_set_field8(&bbp, BBP138_TX_DAC1, 1);
3608
3609                 rt2800_bbp_write(rt2x00dev, 138, bbp);
3610         }
3611
3612         if (rt2x00_rt(rt2x00dev, RT3071) ||
3613             rt2x00_rt(rt2x00dev, RT3090) ||
3614             rt2x00_rt(rt2x00dev, RT3390)) {
3615                 rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
3616                 rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
3617                 rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
3618                 rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
3619                 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
3620                 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
3621                 rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
3622
3623                 rt2800_rfcsr_read(rt2x00dev, 15, &rfcsr);
3624                 rt2x00_set_field8(&rfcsr, RFCSR15_TX_LO2_EN, 0);
3625                 rt2800_rfcsr_write(rt2x00dev, 15, rfcsr);
3626
3627                 rt2800_rfcsr_read(rt2x00dev, 20, &rfcsr);
3628                 rt2x00_set_field8(&rfcsr, RFCSR20_RX_LO1_EN, 0);
3629                 rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
3630
3631                 rt2800_rfcsr_read(rt2x00dev, 21, &rfcsr);
3632                 rt2x00_set_field8(&rfcsr, RFCSR21_RX_LO2_EN, 0);
3633                 rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
3634         }
3635
3636         if (rt2x00_rt(rt2x00dev, RT3070)) {
3637                 rt2800_rfcsr_read(rt2x00dev, 27, &rfcsr);
3638                 if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F))
3639                         rt2x00_set_field8(&rfcsr, RFCSR27_R1, 3);
3640                 else
3641                         rt2x00_set_field8(&rfcsr, RFCSR27_R1, 0);
3642                 rt2x00_set_field8(&rfcsr, RFCSR27_R2, 0);
3643                 rt2x00_set_field8(&rfcsr, RFCSR27_R3, 0);
3644                 rt2x00_set_field8(&rfcsr, RFCSR27_R4, 0);
3645                 rt2800_rfcsr_write(rt2x00dev, 27, rfcsr);
3646         }
3647
3648         if (rt2x00_rt(rt2x00dev, RT5390)) {
3649                 rt2800_rfcsr_read(rt2x00dev, 38, &rfcsr);
3650                 rt2x00_set_field8(&rfcsr, RFCSR38_RX_LO1_EN, 0);
3651                 rt2800_rfcsr_write(rt2x00dev, 38, rfcsr);
3652
3653                 rt2800_rfcsr_read(rt2x00dev, 39, &rfcsr);
3654                 rt2x00_set_field8(&rfcsr, RFCSR39_RX_LO2_EN, 0);
3655                 rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
3656
3657                 rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
3658                 rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2);
3659                 rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
3660         }
3661
3662         return 0;
3663 }
3664
3665 int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev)
3666 {
3667         u32 reg;
3668         u16 word;
3669
3670         /*
3671          * Initialize all registers.
3672          */
3673         if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
3674                      rt2800_init_registers(rt2x00dev) ||
3675                      rt2800_init_bbp(rt2x00dev) ||
3676                      rt2800_init_rfcsr(rt2x00dev)))
3677                 return -EIO;
3678
3679         /*
3680          * Send signal to firmware during boot time.
3681          */
3682         rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
3683
3684         if (rt2x00_is_usb(rt2x00dev) &&
3685             (rt2x00_rt(rt2x00dev, RT3070) ||
3686              rt2x00_rt(rt2x00dev, RT3071) ||
3687              rt2x00_rt(rt2x00dev, RT3572))) {
3688                 udelay(200);
3689                 rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
3690                 udelay(10);
3691         }
3692
3693         /*
3694          * Enable RX.
3695          */
3696         rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
3697         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
3698         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
3699         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
3700
3701         udelay(50);
3702
3703         rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
3704         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
3705         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
3706         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2);
3707         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
3708         rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
3709
3710         rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
3711         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
3712         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
3713         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
3714
3715         /*
3716          * Initialize LED control
3717          */
3718         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED_AG_CONF, &word);
3719         rt2800_mcu_request(rt2x00dev, MCU_LED_AG_CONF, 0xff,
3720                            word & 0xff, (word >> 8) & 0xff);
3721
3722         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED_ACT_CONF, &word);
3723         rt2800_mcu_request(rt2x00dev, MCU_LED_ACT_CONF, 0xff,
3724                            word & 0xff, (word >> 8) & 0xff);
3725
3726         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED_POLARITY, &word);
3727         rt2800_mcu_request(rt2x00dev, MCU_LED_LED_POLARITY, 0xff,
3728                            word & 0xff, (word >> 8) & 0xff);
3729
3730         return 0;
3731 }
3732 EXPORT_SYMBOL_GPL(rt2800_enable_radio);
3733
3734 void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev)
3735 {
3736         u32 reg;
3737
3738         rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
3739         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
3740         rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
3741         rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
3742
3743         /* Wait for DMA, ignore error */
3744         rt2800_wait_wpdma_ready(rt2x00dev);
3745
3746         rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
3747         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 0);
3748         rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
3749         rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
3750 }
3751 EXPORT_SYMBOL_GPL(rt2800_disable_radio);
3752
3753 int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev)
3754 {
3755         u32 reg;
3756
3757         rt2800_register_read(rt2x00dev, EFUSE_CTRL, &reg);
3758
3759         return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT);
3760 }
3761 EXPORT_SYMBOL_GPL(rt2800_efuse_detect);
3762
3763 static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i)
3764 {
3765         u32 reg;
3766
3767         mutex_lock(&rt2x00dev->csr_mutex);
3768
3769         rt2800_register_read_lock(rt2x00dev, EFUSE_CTRL, &reg);
3770         rt2x00_set_field32(&reg, EFUSE_CTRL_ADDRESS_IN, i);
3771         rt2x00_set_field32(&reg, EFUSE_CTRL_MODE, 0);
3772         rt2x00_set_field32(&reg, EFUSE_CTRL_KICK, 1);
3773         rt2800_register_write_lock(rt2x00dev, EFUSE_CTRL, reg);
3774
3775         /* Wait until the EEPROM has been loaded */
3776         rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, &reg);
3777
3778         /* Apparently the data is read from end to start */
3779         rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, &reg);
3780         /* The returned value is in CPU order, but eeprom is le */
3781         *(u32 *)&rt2x00dev->eeprom[i] = cpu_to_le32(reg);
3782         rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, &reg);
3783         *(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg);
3784         rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, &reg);
3785         *(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg);
3786         rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, &reg);
3787         *(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg);
3788
3789         mutex_unlock(&rt2x00dev->csr_mutex);
3790 }
3791
3792 void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
3793 {
3794         unsigned int i;
3795
3796         for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8)
3797                 rt2800_efuse_read(rt2x00dev, i);
3798 }
3799 EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
3800
3801 int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
3802 {
3803         u16 word;
3804         u8 *mac;
3805         u8 default_lna_gain;
3806
3807         /*
3808          * Start validation of the data that has been read.
3809          */
3810         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
3811         if (!is_valid_ether_addr(mac)) {
3812                 random_ether_addr(mac);
3813                 EEPROM(rt2x00dev, "MAC: %pM\n", mac);
3814         }
3815
3816         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &word);
3817         if (word == 0xffff) {
3818                 rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
3819                 rt2x00_set_field16(&word, EEPROM_NIC_CONF0_TXPATH, 1);
3820                 rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820);
3821                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
3822                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
3823         } else if (rt2x00_rt(rt2x00dev, RT2860) ||
3824                    rt2x00_rt(rt2x00dev, RT2872)) {
3825                 /*
3826                  * There is a max of 2 RX streams for RT28x0 series
3827                  */
3828                 if (rt2x00_get_field16(word, EEPROM_NIC_CONF0_RXPATH) > 2)
3829                         rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
3830                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
3831         }
3832
3833         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &word);
3834         if (word == 0xffff) {
3835                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_HW_RADIO, 0);
3836                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC, 0);
3837                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G, 0);
3838                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G, 0);
3839                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_CARDBUS_ACCEL, 0);
3840                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_2G, 0);
3841                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_5G, 0);
3842                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_WPS_PBC, 0);
3843                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_2G, 0);
3844                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_5G, 0);
3845                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BROADBAND_EXT_LNA, 0);
3846                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_ANT_DIVERSITY, 0);
3847                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_INTERNAL_TX_ALC, 0);
3848                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BT_COEXIST, 0);
3849                 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_DAC_TEST, 0);
3850                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC_CONF1, word);
3851                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
3852         }
3853
3854         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
3855         if ((word & 0x00ff) == 0x00ff) {
3856                 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
3857                 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
3858                 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
3859         }
3860         if ((word & 0xff00) == 0xff00) {
3861                 rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
3862                                    LED_MODE_TXRX_ACTIVITY);
3863                 rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
3864                 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
3865                 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED_AG_CONF, 0x5555);
3866                 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED_ACT_CONF, 0x2221);
3867                 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED_POLARITY, 0xa9f8);
3868                 EEPROM(rt2x00dev, "Led Mode: 0x%04x\n", word);
3869         }
3870
3871         /*
3872          * During the LNA validation we are going to use
3873          * lna0 as correct value. Note that EEPROM_LNA
3874          * is never validated.
3875          */
3876         rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
3877         default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
3878
3879         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
3880         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
3881                 rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
3882         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
3883                 rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
3884         rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
3885
3886         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
3887         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
3888                 rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
3889         if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
3890             rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
3891                 rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
3892                                    default_lna_gain);
3893         rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
3894
3895         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
3896         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
3897                 rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
3898         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
3899                 rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
3900         rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
3901
3902         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
3903         if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
3904                 rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
3905         if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
3906             rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
3907                 rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
3908                                    default_lna_gain);
3909         rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
3910
3911         return 0;
3912 }
3913 EXPORT_SYMBOL_GPL(rt2800_validate_eeprom);
3914
3915 int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
3916 {
3917         u32 reg;
3918         u16 value;
3919         u16 eeprom;
3920
3921         /*
3922          * Read EEPROM word for configuration.
3923          */
3924         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
3925
3926         /*
3927          * Identify RF chipset by EEPROM value
3928          * RT28xx/RT30xx: defined in "EEPROM_NIC_CONF0_RF_TYPE" field
3929          * RT53xx: defined in "EEPROM_CHIP_ID" field
3930          */
3931         rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
3932         if (rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5390)
3933                 rt2x00_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &value);
3934         else
3935                 value = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
3936
3937         rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET),
3938                         value, rt2x00_get_field32(reg, MAC_CSR0_REVISION));
3939
3940         switch (rt2x00dev->chip.rt) {
3941         case RT2860:
3942         case RT2872:
3943         case RT2883:
3944         case RT3070:
3945         case RT3071:
3946         case RT3090:
3947         case RT3390:
3948         case RT3572:
3949         case RT5390:
3950                 break;
3951         default:
3952                 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
3953                 return -ENODEV;
3954         }
3955
3956         switch (rt2x00dev->chip.rf) {
3957         case RF2820:
3958         case RF2850:
3959         case RF2720:
3960         case RF2750:
3961         case RF3020:
3962         case RF2020:
3963         case RF3021:
3964         case RF3022:
3965         case RF3052:
3966         case RF3320:
3967         case RF5370:
3968         case RF5390:
3969                 break;
3970         default:
3971                 ERROR(rt2x00dev, "Invalid RF chipset 0x%x detected.\n",
3972                       rt2x00dev->chip.rf);
3973                 return -ENODEV;
3974         }
3975
3976         /*
3977          * Identify default antenna configuration.
3978          */
3979         rt2x00dev->default_ant.tx_chain_num =
3980             rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH);
3981         rt2x00dev->default_ant.rx_chain_num =
3982             rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH);
3983
3984         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
3985
3986         if (rt2x00_rt(rt2x00dev, RT3070) ||
3987             rt2x00_rt(rt2x00dev, RT3090) ||
3988             rt2x00_rt(rt2x00dev, RT3390)) {
3989                 value = rt2x00_get_field16(eeprom,
3990                                 EEPROM_NIC_CONF1_ANT_DIVERSITY);
3991                 switch (value) {
3992                 case 0:
3993                 case 1:
3994                 case 2:
3995                         rt2x00dev->default_ant.tx = ANTENNA_A;
3996                         rt2x00dev->default_ant.rx = ANTENNA_A;
3997                         break;
3998                 case 3:
3999                         rt2x00dev->default_ant.tx = ANTENNA_A;
4000                         rt2x00dev->default_ant.rx = ANTENNA_B;
4001                         break;
4002                 }
4003         } else {
4004                 rt2x00dev->default_ant.tx = ANTENNA_A;
4005                 rt2x00dev->default_ant.rx = ANTENNA_A;
4006         }
4007
4008         /*
4009          * Determine external LNA informations.
4010          */
4011         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G))
4012                 __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
4013         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G))
4014                 __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
4015
4016         /*
4017          * Detect if this device has an hardware controlled radio.
4018          */
4019         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_HW_RADIO))
4020                 __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
4021
4022         /*
4023          * Detect if this device has Bluetooth co-existence.
4024          */
4025         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST))
4026                 __set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
4027
4028         /*
4029          * Read frequency offset and RF programming sequence.
4030          */
4031         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
4032         rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
4033
4034         /*
4035          * Store led settings, for correct led behaviour.
4036          */
4037 #ifdef CONFIG_RT2X00_LIB_LEDS
4038         rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
4039         rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
4040         rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
4041
4042         rt2x00dev->led_mcu_reg = eeprom;
4043 #endif /* CONFIG_RT2X00_LIB_LEDS */
4044
4045         /*
4046          * Check if support EIRP tx power limit feature.
4047          */
4048         rt2x00_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER, &eeprom);
4049
4050         if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) <
4051                                         EIRP_MAX_TX_POWER_LIMIT)
4052                 __set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags);
4053
4054         return 0;
4055 }
4056 EXPORT_SYMBOL_GPL(rt2800_init_eeprom);
4057
4058 /*
4059  * RF value list for rt28xx
4060  * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
4061  */
4062 static const struct rf_channel rf_vals[] = {
4063         { 1,  0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
4064         { 2,  0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
4065         { 3,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
4066         { 4,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
4067         { 5,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
4068         { 6,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
4069         { 7,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
4070         { 8,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
4071         { 9,  0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
4072         { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
4073         { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
4074         { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
4075         { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
4076         { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
4077
4078         /* 802.11 UNI / HyperLan 2 */
4079         { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
4080         { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
4081         { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
4082         { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
4083         { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
4084         { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
4085         { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
4086         { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
4087         { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
4088         { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
4089         { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
4090         { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
4091
4092         /* 802.11 HyperLan 2 */
4093         { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
4094         { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
4095         { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
4096         { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
4097         { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
4098         { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
4099         { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
4100         { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
4101         { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
4102         { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
4103         { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
4104         { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
4105         { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
4106         { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
4107         { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
4108         { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
4109
4110         /* 802.11 UNII */
4111         { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
4112         { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
4113         { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
4114         { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
4115         { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
4116         { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
4117         { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
4118         { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
4119         { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
4120         { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
4121         { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
4122
4123         /* 802.11 Japan */
4124         { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
4125         { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
4126         { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
4127         { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
4128         { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
4129         { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
4130         { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
4131 };
4132
4133 /*
4134  * RF value list for rt3xxx
4135  * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052)
4136  */
4137 static const struct rf_channel rf_vals_3x[] = {
4138         {1,  241, 2, 2 },
4139         {2,  241, 2, 7 },
4140         {3,  242, 2, 2 },
4141         {4,  242, 2, 7 },
4142         {5,  243, 2, 2 },
4143         {6,  243, 2, 7 },
4144         {7,  244, 2, 2 },
4145         {8,  244, 2, 7 },
4146         {9,  245, 2, 2 },
4147         {10, 245, 2, 7 },
4148         {11, 246, 2, 2 },
4149         {12, 246, 2, 7 },
4150         {13, 247, 2, 2 },
4151         {14, 248, 2, 4 },
4152
4153         /* 802.11 UNI / HyperLan 2 */
4154         {36, 0x56, 0, 4},
4155         {38, 0x56, 0, 6},
4156         {40, 0x56, 0, 8},
4157         {44, 0x57, 0, 0},
4158         {46, 0x57, 0, 2},
4159         {48, 0x57, 0, 4},
4160         {52, 0x57, 0, 8},
4161         {54, 0x57, 0, 10},
4162         {56, 0x58, 0, 0},
4163         {60, 0x58, 0, 4},
4164         {62, 0x58, 0, 6},
4165         {64, 0x58, 0, 8},
4166
4167         /* 802.11 HyperLan 2 */
4168         {100, 0x5b, 0, 8},
4169         {102, 0x5b, 0, 10},
4170         {104, 0x5c, 0, 0},
4171         {108, 0x5c, 0, 4},
4172         {110, 0x5c, 0, 6},
4173         {112, 0x5c, 0, 8},
4174         {116, 0x5d, 0, 0},
4175         {118, 0x5d, 0, 2},
4176         {120, 0x5d, 0, 4},
4177         {124, 0x5d, 0, 8},
4178         {126, 0x5d, 0, 10},
4179         {128, 0x5e, 0, 0},
4180         {132, 0x5e, 0, 4},
4181         {134, 0x5e, 0, 6},
4182         {136, 0x5e, 0, 8},
4183         {140, 0x5f, 0, 0},
4184
4185         /* 802.11 UNII */
4186         {149, 0x5f, 0, 9},
4187         {151, 0x5f, 0, 11},
4188         {153, 0x60, 0, 1},
4189         {157, 0x60, 0, 5},
4190         {159, 0x60, 0, 7},
4191         {161, 0x60, 0, 9},
4192         {165, 0x61, 0, 1},
4193         {167, 0x61, 0, 3},
4194         {169, 0x61, 0, 5},
4195         {171, 0x61, 0, 7},
4196         {173, 0x61, 0, 9},
4197 };
4198
4199 int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
4200 {
4201         struct hw_mode_spec *spec = &rt2x00dev->spec;
4202         struct channel_info *info;
4203         char *default_power1;
4204         char *default_power2;
4205         unsigned int i;
4206         u16 eeprom;
4207
4208         /*
4209          * Disable powersaving as default on PCI devices.
4210          */
4211         if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
4212                 rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
4213
4214         /*
4215          * Initialize all hw fields.
4216          */
4217         rt2x00dev->hw->flags =
4218             IEEE80211_HW_SIGNAL_DBM |
4219             IEEE80211_HW_SUPPORTS_PS |
4220             IEEE80211_HW_PS_NULLFUNC_STACK |
4221             IEEE80211_HW_AMPDU_AGGREGATION;
4222         /*
4223          * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices
4224          * unless we are capable of sending the buffered frames out after the
4225          * DTIM transmission using rt2x00lib_beacondone. This will send out
4226          * multicast and broadcast traffic immediately instead of buffering it
4227          * infinitly and thus dropping it after some time.
4228          */
4229         if (!rt2x00_is_usb(rt2x00dev))
4230                 rt2x00dev->hw->flags |=
4231                         IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
4232
4233         SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
4234         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
4235                                 rt2x00_eeprom_addr(rt2x00dev,
4236                                                    EEPROM_MAC_ADDR_0));
4237
4238         /*
4239          * As rt2800 has a global fallback table we cannot specify
4240          * more then one tx rate per frame but since the hw will
4241          * try several rates (based on the fallback table) we should
4242          * initialize max_report_rates to the maximum number of rates
4243          * we are going to try. Otherwise mac80211 will truncate our
4244          * reported tx rates and the rc algortihm will end up with
4245          * incorrect data.
4246          */
4247         rt2x00dev->hw->max_rates = 1;
4248         rt2x00dev->hw->max_report_rates = 7;
4249         rt2x00dev->hw->max_rate_tries = 1;
4250
4251         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
4252
4253         /*
4254          * Initialize hw_mode information.
4255          */
4256         spec->supported_bands = SUPPORT_BAND_2GHZ;
4257         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
4258
4259         if (rt2x00_rf(rt2x00dev, RF2820) ||
4260             rt2x00_rf(rt2x00dev, RF2720)) {
4261                 spec->num_channels = 14;
4262                 spec->channels = rf_vals;
4263         } else if (rt2x00_rf(rt2x00dev, RF2850) ||
4264                    rt2x00_rf(rt2x00dev, RF2750)) {
4265                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
4266                 spec->num_channels = ARRAY_SIZE(rf_vals);
4267                 spec->channels = rf_vals;
4268         } else if (rt2x00_rf(rt2x00dev, RF3020) ||
4269                    rt2x00_rf(rt2x00dev, RF2020) ||
4270                    rt2x00_rf(rt2x00dev, RF3021) ||
4271                    rt2x00_rf(rt2x00dev, RF3022) ||
4272                    rt2x00_rf(rt2x00dev, RF3320) ||
4273                    rt2x00_rf(rt2x00dev, RF5370) ||
4274                    rt2x00_rf(rt2x00dev, RF5390)) {
4275                 spec->num_channels = 14;
4276                 spec->channels = rf_vals_3x;
4277         } else if (rt2x00_rf(rt2x00dev, RF3052)) {
4278                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
4279                 spec->num_channels = ARRAY_SIZE(rf_vals_3x);
4280                 spec->channels = rf_vals_3x;
4281         }
4282
4283         /*
4284          * Initialize HT information.
4285          */
4286         if (!rt2x00_rf(rt2x00dev, RF2020))
4287                 spec->ht.ht_supported = true;
4288         else
4289                 spec->ht.ht_supported = false;
4290
4291         spec->ht.cap =
4292             IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
4293             IEEE80211_HT_CAP_GRN_FLD |
4294             IEEE80211_HT_CAP_SGI_20 |
4295             IEEE80211_HT_CAP_SGI_40;
4296
4297         if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) >= 2)
4298                 spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC;
4299
4300         spec->ht.cap |=
4301             rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) <<
4302                 IEEE80211_HT_CAP_RX_STBC_SHIFT;
4303
4304         spec->ht.ampdu_factor = 3;
4305         spec->ht.ampdu_density = 4;
4306         spec->ht.mcs.tx_params =
4307             IEEE80211_HT_MCS_TX_DEFINED |
4308             IEEE80211_HT_MCS_TX_RX_DIFF |
4309             ((rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) - 1) <<
4310                 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
4311
4312         switch (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH)) {
4313         case 3:
4314                 spec->ht.mcs.rx_mask[2] = 0xff;
4315         case 2:
4316                 spec->ht.mcs.rx_mask[1] = 0xff;
4317         case 1:
4318                 spec->ht.mcs.rx_mask[0] = 0xff;
4319                 spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
4320                 break;
4321         }
4322
4323         /*
4324          * Create channel information array
4325          */
4326         info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL);
4327         if (!info)
4328                 return -ENOMEM;
4329
4330         spec->channels_info = info;
4331
4332         default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
4333         default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
4334
4335         for (i = 0; i < 14; i++) {
4336                 info[i].default_power1 = default_power1[i];
4337                 info[i].default_power2 = default_power2[i];
4338         }
4339
4340         if (spec->num_channels > 14) {
4341                 default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
4342                 default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
4343
4344                 for (i = 14; i < spec->num_channels; i++) {
4345                         info[i].default_power1 = default_power1[i];
4346                         info[i].default_power2 = default_power2[i];
4347                 }
4348         }
4349
4350         return 0;
4351 }
4352 EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode);
4353
4354 /*
4355  * IEEE80211 stack callback functions.
4356  */
4357 void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32,
4358                          u16 *iv16)
4359 {
4360         struct rt2x00_dev *rt2x00dev = hw->priv;
4361         struct mac_iveiv_entry iveiv_entry;
4362         u32 offset;
4363
4364         offset = MAC_IVEIV_ENTRY(hw_key_idx);
4365         rt2800_register_multiread(rt2x00dev, offset,
4366                                       &iveiv_entry, sizeof(iveiv_entry));
4367
4368         memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16));
4369         memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32));
4370 }
4371 EXPORT_SYMBOL_GPL(rt2800_get_tkip_seq);
4372
4373 int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
4374 {
4375         struct rt2x00_dev *rt2x00dev = hw->priv;
4376         u32 reg;
4377         bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
4378
4379         rt2800_register_read(rt2x00dev, TX_RTS_CFG, &reg);
4380         rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
4381         rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
4382
4383         rt2800_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
4384         rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
4385         rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
4386
4387         rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
4388         rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
4389         rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
4390
4391         rt2800_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
4392         rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
4393         rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
4394
4395         rt2800_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
4396         rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
4397         rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
4398
4399         rt2800_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
4400         rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
4401         rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
4402
4403         rt2800_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
4404         rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
4405         rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
4406
4407         return 0;
4408 }
4409 EXPORT_SYMBOL_GPL(rt2800_set_rts_threshold);
4410
4411 int rt2800_conf_tx(struct ieee80211_hw *hw,
4412                    struct ieee80211_vif *vif, u16 queue_idx,
4413                    const struct ieee80211_tx_queue_params *params)
4414 {
4415         struct rt2x00_dev *rt2x00dev = hw->priv;
4416         struct data_queue *queue;
4417         struct rt2x00_field32 field;
4418         int retval;
4419         u32 reg;
4420         u32 offset;
4421
4422         /*
4423          * First pass the configuration through rt2x00lib, that will
4424          * update the queue settings and validate the input. After that
4425          * we are free to update the registers based on the value
4426          * in the queue parameter.
4427          */
4428         retval = rt2x00mac_conf_tx(hw, vif, queue_idx, params);
4429         if (retval)
4430                 return retval;
4431
4432         /*
4433          * We only need to perform additional register initialization
4434          * for WMM queues/
4435          */
4436         if (queue_idx >= 4)
4437                 return 0;
4438
4439         queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx);
4440
4441         /* Update WMM TXOP register */
4442         offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
4443         field.bit_offset = (queue_idx & 1) * 16;
4444         field.bit_mask = 0xffff << field.bit_offset;
4445
4446         rt2800_register_read(rt2x00dev, offset, &reg);
4447         rt2x00_set_field32(&reg, field, queue->txop);
4448         rt2800_register_write(rt2x00dev, offset, reg);
4449
4450         /* Update WMM registers */
4451         field.bit_offset = queue_idx * 4;
4452         field.bit_mask = 0xf << field.bit_offset;
4453
4454         rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
4455         rt2x00_set_field32(&reg, field, queue->aifs);
4456         rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
4457
4458         rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
4459         rt2x00_set_field32(&reg, field, queue->cw_min);
4460         rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
4461
4462         rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
4463         rt2x00_set_field32(&reg, field, queue->cw_max);
4464         rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
4465
4466         /* Update EDCA registers */
4467         offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
4468
4469         rt2800_register_read(rt2x00dev, offset, &reg);
4470         rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
4471         rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
4472         rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
4473         rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
4474         rt2800_register_write(rt2x00dev, offset, reg);
4475
4476         return 0;
4477 }
4478 EXPORT_SYMBOL_GPL(rt2800_conf_tx);
4479
4480 u64 rt2800_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
4481 {
4482         struct rt2x00_dev *rt2x00dev = hw->priv;
4483         u64 tsf;
4484         u32 reg;
4485
4486         rt2800_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
4487         tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
4488         rt2800_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
4489         tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
4490
4491         return tsf;
4492 }
4493 EXPORT_SYMBOL_GPL(rt2800_get_tsf);
4494
4495 int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
4496                         enum ieee80211_ampdu_mlme_action action,
4497                         struct ieee80211_sta *sta, u16 tid, u16 *ssn,
4498                         u8 buf_size)
4499 {
4500         struct rt2x00_sta *sta_priv = (struct rt2x00_sta *)sta->drv_priv;
4501         int ret = 0;
4502
4503         /*
4504          * Don't allow aggregation for stations the hardware isn't aware
4505          * of because tx status reports for frames to an unknown station
4506          * always contain wcid=255 and thus we can't distinguish between
4507          * multiple stations which leads to unwanted situations when the
4508          * hw reorders frames due to aggregation.
4509          */
4510         if (sta_priv->wcid < 0)
4511                 return 1;
4512
4513         switch (action) {
4514         case IEEE80211_AMPDU_RX_START:
4515         case IEEE80211_AMPDU_RX_STOP:
4516                 /*
4517                  * The hw itself takes care of setting up BlockAck mechanisms.
4518                  * So, we only have to allow mac80211 to nagotiate a BlockAck
4519                  * agreement. Once that is done, the hw will BlockAck incoming
4520                  * AMPDUs without further setup.
4521                  */
4522                 break;
4523         case IEEE80211_AMPDU_TX_START:
4524                 ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
4525                 break;
4526         case IEEE80211_AMPDU_TX_STOP:
4527                 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
4528                 break;
4529         case IEEE80211_AMPDU_TX_OPERATIONAL:
4530                 break;
4531         default:
4532                 WARNING((struct rt2x00_dev *)hw->priv, "Unknown AMPDU action\n");
4533         }
4534
4535         return ret;
4536 }
4537 EXPORT_SYMBOL_GPL(rt2800_ampdu_action);
4538
4539 int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
4540                       struct survey_info *survey)
4541 {
4542         struct rt2x00_dev *rt2x00dev = hw->priv;
4543         struct ieee80211_conf *conf = &hw->conf;
4544         u32 idle, busy, busy_ext;
4545
4546         if (idx != 0)
4547                 return -ENOENT;
4548
4549         survey->channel = conf->channel;
4550
4551         rt2800_register_read(rt2x00dev, CH_IDLE_STA, &idle);
4552         rt2800_register_read(rt2x00dev, CH_BUSY_STA, &busy);
4553         rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, &busy_ext);
4554
4555         if (idle || busy) {
4556                 survey->filled = SURVEY_INFO_CHANNEL_TIME |
4557                                  SURVEY_INFO_CHANNEL_TIME_BUSY |
4558                                  SURVEY_INFO_CHANNEL_TIME_EXT_BUSY;
4559
4560                 survey->channel_time = (idle + busy) / 1000;
4561                 survey->channel_time_busy = busy / 1000;
4562                 survey->channel_time_ext_busy = busy_ext / 1000;
4563         }
4564
4565         if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL))
4566                 survey->filled |= SURVEY_INFO_IN_USE;
4567
4568         return 0;
4569
4570 }
4571 EXPORT_SYMBOL_GPL(rt2800_get_survey);
4572
4573 MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz");
4574 MODULE_VERSION(DRV_VERSION);
4575 MODULE_DESCRIPTION("Ralink RT2800 library");
4576 MODULE_LICENSE("GPL");