2 * Marvell Wireless LAN device driver: CFG80211
4 * Copyright (C) 2011, Marvell International Ltd.
6 * This software file (the "File") is distributed by Marvell International
7 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
8 * (the "License"). You may use, redistribute and/or modify this File in
9 * accordance with the terms and conditions of the License, a copy of which
10 * is available by writing to the Free Software Foundation, Inc.,
11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
16 * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
17 * this warranty disclaimer.
24 * This function maps the nl802.11 channel type into driver channel type.
26 * The mapping is as follows -
27 * NL80211_CHAN_NO_HT -> IEEE80211_HT_PARAM_CHA_SEC_NONE
28 * NL80211_CHAN_HT20 -> IEEE80211_HT_PARAM_CHA_SEC_NONE
29 * NL80211_CHAN_HT40PLUS -> IEEE80211_HT_PARAM_CHA_SEC_ABOVE
30 * NL80211_CHAN_HT40MINUS -> IEEE80211_HT_PARAM_CHA_SEC_BELOW
31 * Others -> IEEE80211_HT_PARAM_CHA_SEC_NONE
34 mwifiex_cfg80211_channel_type_to_sec_chan_offset(enum nl80211_channel_type
37 switch (channel_type) {
38 case NL80211_CHAN_NO_HT:
39 case NL80211_CHAN_HT20:
40 return IEEE80211_HT_PARAM_CHA_SEC_NONE;
41 case NL80211_CHAN_HT40PLUS:
42 return IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
43 case NL80211_CHAN_HT40MINUS:
44 return IEEE80211_HT_PARAM_CHA_SEC_BELOW;
46 return IEEE80211_HT_PARAM_CHA_SEC_NONE;
51 * This function checks whether WEP is set.
54 mwifiex_is_alg_wep(u32 cipher)
57 case WLAN_CIPHER_SUITE_WEP40:
58 case WLAN_CIPHER_SUITE_WEP104:
68 * This function retrieves the private structure from kernel wiphy structure.
70 static void *mwifiex_cfg80211_get_priv(struct wiphy *wiphy)
72 return (void *) (*(unsigned long *) wiphy_priv(wiphy));
76 * CFG802.11 operation handler to delete a network key.
79 mwifiex_cfg80211_del_key(struct wiphy *wiphy, struct net_device *netdev,
80 u8 key_index, bool pairwise, const u8 *mac_addr)
82 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
84 if (mwifiex_set_encode(priv, NULL, 0, key_index, 1)) {
85 wiphy_err(wiphy, "deleting the crypto keys\n");
89 wiphy_dbg(wiphy, "info: crypto keys deleted\n");
94 * CFG802.11 operation handler to set Tx power.
97 mwifiex_cfg80211_set_tx_power(struct wiphy *wiphy,
98 enum nl80211_tx_power_setting type,
101 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
102 struct mwifiex_power_cfg power_cfg;
103 int dbm = MBM_TO_DBM(mbm);
105 if (type == NL80211_TX_POWER_FIXED) {
106 power_cfg.is_power_auto = 0;
107 power_cfg.power_level = dbm;
109 power_cfg.is_power_auto = 1;
112 return mwifiex_set_tx_power(priv, &power_cfg);
116 * CFG802.11 operation handler to set Power Save option.
118 * The timeout value, if provided, is currently ignored.
121 mwifiex_cfg80211_set_power_mgmt(struct wiphy *wiphy,
122 struct net_device *dev,
123 bool enabled, int timeout)
125 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
130 "info: ignoring the timeout value"
131 " for IEEE power save\n");
135 return mwifiex_drv_set_power(priv, &ps_mode);
139 * CFG802.11 operation handler to set the default network key.
142 mwifiex_cfg80211_set_default_key(struct wiphy *wiphy, struct net_device *netdev,
143 u8 key_index, bool unicast,
146 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
148 /* Return if WEP key not configured */
149 if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED)
152 if (mwifiex_set_encode(priv, NULL, 0, key_index, 0)) {
153 wiphy_err(wiphy, "set default Tx key index\n");
161 * CFG802.11 operation handler to add a network key.
164 mwifiex_cfg80211_add_key(struct wiphy *wiphy, struct net_device *netdev,
165 u8 key_index, bool pairwise, const u8 *mac_addr,
166 struct key_params *params)
168 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
170 if (mwifiex_set_encode(priv, params->key, params->key_len,
172 wiphy_err(wiphy, "crypto keys added\n");
180 * This function sends domain information to the firmware.
182 * The following information are passed to the firmware -
184 * - Sub bands (first channel, number of channels, maximum Tx power)
186 static int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy)
188 u8 no_of_triplet = 0;
189 struct ieee80211_country_ie_triplet *t;
190 u8 no_of_parsed_chan = 0;
191 u8 first_chan = 0, next_chan = 0, max_pwr = 0;
193 enum ieee80211_band band;
194 struct ieee80211_supported_band *sband;
195 struct ieee80211_channel *ch;
196 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
197 struct mwifiex_adapter *adapter = priv->adapter;
198 struct mwifiex_802_11d_domain_reg *domain_info = &adapter->domain_reg;
200 /* Set country code */
201 domain_info->country_code[0] = priv->country_code[0];
202 domain_info->country_code[1] = priv->country_code[1];
203 domain_info->country_code[2] = ' ';
205 band = mwifiex_band_to_radio_type(adapter->config_bands);
206 if (!wiphy->bands[band]) {
207 wiphy_err(wiphy, "11D: setting domain info in FW\n");
211 sband = wiphy->bands[band];
213 for (i = 0; i < sband->n_channels ; i++) {
214 ch = &sband->channels[i];
215 if (ch->flags & IEEE80211_CHAN_DISABLED)
220 first_chan = (u32) ch->hw_value;
221 next_chan = first_chan;
222 max_pwr = ch->max_power;
223 no_of_parsed_chan = 1;
227 if (ch->hw_value == next_chan + 1 &&
228 ch->max_power == max_pwr) {
232 t = &domain_info->triplet[no_of_triplet];
233 t->chans.first_channel = first_chan;
234 t->chans.num_channels = no_of_parsed_chan;
235 t->chans.max_power = max_pwr;
237 first_chan = (u32) ch->hw_value;
238 next_chan = first_chan;
239 max_pwr = ch->max_power;
240 no_of_parsed_chan = 1;
245 t = &domain_info->triplet[no_of_triplet];
246 t->chans.first_channel = first_chan;
247 t->chans.num_channels = no_of_parsed_chan;
248 t->chans.max_power = max_pwr;
252 domain_info->no_of_triplet = no_of_triplet;
254 if (mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
255 HostCmd_ACT_GEN_SET, 0, NULL)) {
256 wiphy_err(wiphy, "11D: setting domain info in FW\n");
264 * CFG802.11 regulatory domain callback function.
266 * This function is called when the regulatory domain is changed due to the
267 * following reasons -
269 * - Set by system core
271 * - Set bt Country IE
273 static int mwifiex_reg_notifier(struct wiphy *wiphy,
274 struct regulatory_request *request)
276 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
278 wiphy_dbg(wiphy, "info: cfg80211 regulatory domain callback for domain"
279 " %c%c\n", request->alpha2[0], request->alpha2[1]);
281 memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2));
283 switch (request->initiator) {
284 case NL80211_REGDOM_SET_BY_DRIVER:
285 case NL80211_REGDOM_SET_BY_CORE:
286 case NL80211_REGDOM_SET_BY_USER:
288 /* Todo: apply driver specific changes in channel flags based
289 on the request initiator if necessary. */
290 case NL80211_REGDOM_SET_BY_COUNTRY_IE:
293 mwifiex_send_domain_info_cmd_fw(wiphy);
299 * This function sets the RF channel.
301 * This function creates multiple IOCTL requests, populates them accordingly
302 * and issues them to set the band/channel and frequency.
305 mwifiex_set_rf_channel(struct mwifiex_private *priv,
306 struct ieee80211_channel *chan,
307 enum nl80211_channel_type channel_type)
309 struct mwifiex_chan_freq_power cfp;
310 u32 config_bands = 0;
311 struct wiphy *wiphy = priv->wdev->wiphy;
312 struct mwifiex_adapter *adapter = priv->adapter;
315 /* Set appropriate bands */
316 if (chan->band == IEEE80211_BAND_2GHZ) {
317 if (channel_type == NL80211_CHAN_NO_HT)
318 if (priv->adapter->config_bands == BAND_B ||
319 priv->adapter->config_bands == BAND_G)
321 priv->adapter->config_bands;
323 config_bands = BAND_B | BAND_G;
325 config_bands = BAND_B | BAND_G | BAND_GN;
327 if (channel_type == NL80211_CHAN_NO_HT)
328 config_bands = BAND_A;
330 config_bands = BAND_AN | BAND_A;
333 if (!((config_bands | adapter->fw_bands) &
334 ~adapter->fw_bands)) {
335 adapter->config_bands = config_bands;
336 if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
337 adapter->adhoc_start_band = config_bands;
338 if ((config_bands & BAND_GN) ||
339 (config_bands & BAND_AN))
340 adapter->adhoc_11n_enabled = true;
342 adapter->adhoc_11n_enabled = false;
345 adapter->sec_chan_offset =
346 mwifiex_cfg80211_channel_type_to_sec_chan_offset
348 adapter->channel_type = channel_type;
350 mwifiex_send_domain_info_cmd_fw(wiphy);
353 wiphy_dbg(wiphy, "info: setting band %d, channel offset %d and "
354 "mode %d\n", config_bands, adapter->sec_chan_offset,
359 memset(&cfp, 0, sizeof(cfp));
360 cfp.freq = chan->center_freq;
361 cfp.channel = ieee80211_frequency_to_channel(chan->center_freq);
363 if (mwifiex_bss_set_channel(priv, &cfp))
366 return mwifiex_drv_change_adhoc_chan(priv, cfp.channel);
370 * CFG802.11 operation handler to set channel.
372 * This function can only be used when station is not connected.
375 mwifiex_cfg80211_set_channel(struct wiphy *wiphy, struct net_device *dev,
376 struct ieee80211_channel *chan,
377 enum nl80211_channel_type channel_type)
379 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
381 if (priv->media_connected) {
382 wiphy_err(wiphy, "This setting is valid only when station "
383 "is not connected\n");
387 return mwifiex_set_rf_channel(priv, chan, channel_type);
391 * This function sets the fragmentation threshold.
393 * The fragmentation threshold value must lie between MWIFIEX_FRAG_MIN_VALUE
394 * and MWIFIEX_FRAG_MAX_VALUE.
397 mwifiex_set_frag(struct mwifiex_private *priv, u32 frag_thr)
401 if (frag_thr < MWIFIEX_FRAG_MIN_VALUE
402 || frag_thr > MWIFIEX_FRAG_MAX_VALUE)
405 /* Send request to firmware */
406 ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
407 HostCmd_ACT_GEN_SET, FRAG_THRESH_I,
414 * This function sets the RTS threshold.
416 * The rts value must lie between MWIFIEX_RTS_MIN_VALUE
417 * and MWIFIEX_RTS_MAX_VALUE.
420 mwifiex_set_rts(struct mwifiex_private *priv, u32 rts_thr)
422 if (rts_thr < MWIFIEX_RTS_MIN_VALUE || rts_thr > MWIFIEX_RTS_MAX_VALUE)
423 rts_thr = MWIFIEX_RTS_MAX_VALUE;
425 return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_SNMP_MIB,
426 HostCmd_ACT_GEN_SET, RTS_THRESH_I,
431 * CFG802.11 operation handler to set wiphy parameters.
433 * This function can be used to set the RTS threshold and the
434 * Fragmentation threshold of the driver.
437 mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
439 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
442 if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
443 ret = mwifiex_set_rts(priv, wiphy->rts_threshold);
448 if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
449 ret = mwifiex_set_frag(priv, wiphy->frag_threshold);
455 * CFG802.11 operation handler to change interface type.
458 mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
459 struct net_device *dev,
460 enum nl80211_iftype type, u32 *flags,
461 struct vif_params *params)
464 struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
466 if (priv->bss_mode == type) {
467 wiphy_warn(wiphy, "already set to required type\n");
471 priv->bss_mode = type;
474 case NL80211_IFTYPE_ADHOC:
475 dev->ieee80211_ptr->iftype = NL80211_IFTYPE_ADHOC;
476 wiphy_dbg(wiphy, "info: setting interface type to adhoc\n");
478 case NL80211_IFTYPE_STATION:
479 dev->ieee80211_ptr->iftype = NL80211_IFTYPE_STATION;
480 wiphy_dbg(wiphy, "info: setting interface type to managed\n");
482 case NL80211_IFTYPE_UNSPECIFIED:
483 dev->ieee80211_ptr->iftype = NL80211_IFTYPE_STATION;
484 wiphy_dbg(wiphy, "info: setting interface type to auto\n");
487 wiphy_err(wiphy, "unknown interface type: %d\n", type);
491 mwifiex_deauthenticate(priv, NULL);
493 priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM;
495 ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_SET_BSS_MODE,
496 HostCmd_ACT_GEN_SET, 0, NULL);
502 * This function dumps the station information on a buffer.
504 * The following information are shown -
505 * - Total bytes transmitted
506 * - Total bytes received
507 * - Total packets transmitted
508 * - Total packets received
509 * - Signal quality level
510 * - Transmission rate
513 mwifiex_dump_station_info(struct mwifiex_private *priv,
514 struct station_info *sinfo)
516 struct mwifiex_ds_get_signal signal;
517 struct mwifiex_rate_cfg rate;
520 sinfo->filled = STATION_INFO_RX_BYTES | STATION_INFO_TX_BYTES |
521 STATION_INFO_RX_PACKETS |
522 STATION_INFO_TX_PACKETS
523 | STATION_INFO_SIGNAL | STATION_INFO_TX_BITRATE;
525 /* Get signal information from the firmware */
526 memset(&signal, 0, sizeof(struct mwifiex_ds_get_signal));
527 if (mwifiex_get_signal_info(priv, &signal)) {
528 dev_err(priv->adapter->dev, "getting signal information\n");
532 if (mwifiex_drv_get_data_rate(priv, &rate)) {
533 dev_err(priv->adapter->dev, "getting data rate\n");
538 * Bit 0 in tx_htinfo indicates that current Tx rate is 11n rate. Valid
539 * MCS index values for us are 0 to 7.
541 if ((priv->tx_htinfo & BIT(0)) && (priv->tx_rate < 8)) {
542 sinfo->txrate.mcs = priv->tx_rate;
543 sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
545 if (priv->tx_htinfo & BIT(1))
546 sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
548 if (priv->tx_htinfo & BIT(2))
549 sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
552 sinfo->rx_bytes = priv->stats.rx_bytes;
553 sinfo->tx_bytes = priv->stats.tx_bytes;
554 sinfo->rx_packets = priv->stats.rx_packets;
555 sinfo->tx_packets = priv->stats.tx_packets;
556 sinfo->signal = priv->qual_level;
557 /* bit rate is in 500 kb/s units. Convert it to 100kb/s units */
558 sinfo->txrate.legacy = rate.rate * 5;
564 * CFG802.11 operation handler to get station information.
566 * This function only works in connected mode, and dumps the
567 * requested station information, if available.
570 mwifiex_cfg80211_get_station(struct wiphy *wiphy, struct net_device *dev,
571 u8 *mac, struct station_info *sinfo)
573 struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
575 if (!priv->media_connected)
577 if (memcmp(mac, priv->cfg_bssid, ETH_ALEN))
580 return mwifiex_dump_station_info(priv, sinfo);
583 /* Supported rates to be advertised to the cfg80211 */
585 static struct ieee80211_rate mwifiex_rates[] = {
586 {.bitrate = 10, .hw_value = 2, },
587 {.bitrate = 20, .hw_value = 4, },
588 {.bitrate = 55, .hw_value = 11, },
589 {.bitrate = 110, .hw_value = 22, },
590 {.bitrate = 220, .hw_value = 44, },
591 {.bitrate = 60, .hw_value = 12, },
592 {.bitrate = 90, .hw_value = 18, },
593 {.bitrate = 120, .hw_value = 24, },
594 {.bitrate = 180, .hw_value = 36, },
595 {.bitrate = 240, .hw_value = 48, },
596 {.bitrate = 360, .hw_value = 72, },
597 {.bitrate = 480, .hw_value = 96, },
598 {.bitrate = 540, .hw_value = 108, },
599 {.bitrate = 720, .hw_value = 144, },
602 /* Channel definitions to be advertised to cfg80211 */
604 static struct ieee80211_channel mwifiex_channels_2ghz[] = {
605 {.center_freq = 2412, .hw_value = 1, },
606 {.center_freq = 2417, .hw_value = 2, },
607 {.center_freq = 2422, .hw_value = 3, },
608 {.center_freq = 2427, .hw_value = 4, },
609 {.center_freq = 2432, .hw_value = 5, },
610 {.center_freq = 2437, .hw_value = 6, },
611 {.center_freq = 2442, .hw_value = 7, },
612 {.center_freq = 2447, .hw_value = 8, },
613 {.center_freq = 2452, .hw_value = 9, },
614 {.center_freq = 2457, .hw_value = 10, },
615 {.center_freq = 2462, .hw_value = 11, },
616 {.center_freq = 2467, .hw_value = 12, },
617 {.center_freq = 2472, .hw_value = 13, },
618 {.center_freq = 2484, .hw_value = 14, },
621 static struct ieee80211_supported_band mwifiex_band_2ghz = {
622 .channels = mwifiex_channels_2ghz,
623 .n_channels = ARRAY_SIZE(mwifiex_channels_2ghz),
624 .bitrates = mwifiex_rates,
628 static struct ieee80211_channel mwifiex_channels_5ghz[] = {
629 {.center_freq = 5040, .hw_value = 8, },
630 {.center_freq = 5060, .hw_value = 12, },
631 {.center_freq = 5080, .hw_value = 16, },
632 {.center_freq = 5170, .hw_value = 34, },
633 {.center_freq = 5190, .hw_value = 38, },
634 {.center_freq = 5210, .hw_value = 42, },
635 {.center_freq = 5230, .hw_value = 46, },
636 {.center_freq = 5180, .hw_value = 36, },
637 {.center_freq = 5200, .hw_value = 40, },
638 {.center_freq = 5220, .hw_value = 44, },
639 {.center_freq = 5240, .hw_value = 48, },
640 {.center_freq = 5260, .hw_value = 52, },
641 {.center_freq = 5280, .hw_value = 56, },
642 {.center_freq = 5300, .hw_value = 60, },
643 {.center_freq = 5320, .hw_value = 64, },
644 {.center_freq = 5500, .hw_value = 100, },
645 {.center_freq = 5520, .hw_value = 104, },
646 {.center_freq = 5540, .hw_value = 108, },
647 {.center_freq = 5560, .hw_value = 112, },
648 {.center_freq = 5580, .hw_value = 116, },
649 {.center_freq = 5600, .hw_value = 120, },
650 {.center_freq = 5620, .hw_value = 124, },
651 {.center_freq = 5640, .hw_value = 128, },
652 {.center_freq = 5660, .hw_value = 132, },
653 {.center_freq = 5680, .hw_value = 136, },
654 {.center_freq = 5700, .hw_value = 140, },
655 {.center_freq = 5745, .hw_value = 149, },
656 {.center_freq = 5765, .hw_value = 153, },
657 {.center_freq = 5785, .hw_value = 157, },
658 {.center_freq = 5805, .hw_value = 161, },
659 {.center_freq = 5825, .hw_value = 165, },
662 static struct ieee80211_supported_band mwifiex_band_5ghz = {
663 .channels = mwifiex_channels_5ghz,
664 .n_channels = ARRAY_SIZE(mwifiex_channels_5ghz),
665 .bitrates = mwifiex_rates - 4,
666 .n_bitrates = ARRAY_SIZE(mwifiex_rates) + 4,
670 /* Supported crypto cipher suits to be advertised to cfg80211 */
672 static const u32 mwifiex_cipher_suites[] = {
673 WLAN_CIPHER_SUITE_WEP40,
674 WLAN_CIPHER_SUITE_WEP104,
675 WLAN_CIPHER_SUITE_TKIP,
676 WLAN_CIPHER_SUITE_CCMP,
680 * CFG802.11 operation handler for setting bit rates.
682 * Function selects legacy bang B/G/BG from corresponding bitrates selection.
683 * Currently only 2.4GHz band is supported.
685 static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy *wiphy,
686 struct net_device *dev,
688 const struct cfg80211_bitrate_mask *mask)
690 struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
691 int index = 0, mode = 0, i;
692 struct mwifiex_adapter *adapter = priv->adapter;
694 /* Currently only 2.4GHz is supported */
695 for (i = 0; i < mwifiex_band_2ghz.n_bitrates; i++) {
697 * Rates below 6 Mbps in the table are CCK rates; 802.11b
698 * and from 6 they are OFDM; 802.11G
700 if (mwifiex_rates[i].bitrate == 60) {
706 if (mask->control[IEEE80211_BAND_2GHZ].legacy < index) {
710 if (mask->control[IEEE80211_BAND_2GHZ].legacy % index)
714 if (!((mode | adapter->fw_bands) & ~adapter->fw_bands)) {
715 adapter->config_bands = mode;
716 if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
717 adapter->adhoc_start_band = mode;
718 adapter->adhoc_11n_enabled = false;
721 adapter->sec_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
722 adapter->channel_type = NL80211_CHAN_NO_HT;
724 wiphy_debug(wiphy, "info: device configured in 802.11%s%s mode\n",
725 (mode & BAND_B) ? "b" : "",
726 (mode & BAND_G) ? "g" : "");
732 * CFG802.11 operation handler for disconnection request.
734 * This function does not work when there is already a disconnection
735 * procedure going on.
738 mwifiex_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev,
741 struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
743 if (mwifiex_deauthenticate(priv, NULL))
746 wiphy_dbg(wiphy, "info: successfully disconnected from %pM:"
747 " reason code %d\n", priv->cfg_bssid, reason_code);
749 memset(priv->cfg_bssid, 0, ETH_ALEN);
755 * This function informs the CFG802.11 subsystem of a new IBSS.
757 * The following information are sent to the CFG802.11 subsystem
758 * to register the new IBSS. If we do not register the new IBSS,
759 * a kernel panic will result.
765 static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv)
767 struct ieee80211_channel *chan;
768 struct mwifiex_bss_info bss_info;
769 struct cfg80211_bss *bss;
771 u8 ie_buf[IEEE80211_MAX_SSID_LEN + sizeof(struct ieee_types_header)];
772 enum ieee80211_band band;
774 if (mwifiex_get_bss_info(priv, &bss_info))
777 ie_buf[0] = WLAN_EID_SSID;
778 ie_buf[1] = bss_info.ssid.ssid_len;
780 memcpy(&ie_buf[sizeof(struct ieee_types_header)],
782 bss_info.ssid.ssid_len);
783 ie_len = ie_buf[1] + sizeof(struct ieee_types_header);
785 band = mwifiex_band_to_radio_type(priv->curr_bss_params.band);
786 chan = __ieee80211_get_channel(priv->wdev->wiphy,
787 ieee80211_channel_to_frequency(bss_info.bss_chan,
790 bss = cfg80211_inform_bss(priv->wdev->wiphy, chan,
791 bss_info.bssid, 0, WLAN_CAPABILITY_IBSS,
792 0, ie_buf, ie_len, 0, GFP_KERNEL);
793 cfg80211_put_bss(bss);
794 memcpy(priv->cfg_bssid, bss_info.bssid, ETH_ALEN);
800 * This function connects with a BSS.
802 * This function handles both Infra and Ad-Hoc modes. It also performs
803 * validity checking on the provided parameters, disconnects from the
804 * current BSS (if any), sets up the association/scan parameters,
805 * including security settings, and performs specific SSID scan before
808 * For Infra mode, the function returns failure if the specified SSID
809 * is not found in scan table. However, for Ad-Hoc mode, it can create
810 * the IBSS if it does not exist. On successful completion in either case,
811 * the function notifies the CFG802.11 subsystem of the new BSS connection.
814 mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid,
815 u8 *bssid, int mode, struct ieee80211_channel *channel,
816 struct cfg80211_connect_params *sme, bool privacy)
818 struct mwifiex_802_11_ssid req_ssid;
819 int ret, auth_type = 0;
820 struct cfg80211_bss *bss = NULL;
821 u8 is_scanning_required = 0;
823 memset(&req_ssid, 0, sizeof(struct mwifiex_802_11_ssid));
825 req_ssid.ssid_len = ssid_len;
826 if (ssid_len > IEEE80211_MAX_SSID_LEN) {
827 dev_err(priv->adapter->dev, "invalid SSID - aborting\n");
831 memcpy(req_ssid.ssid, ssid, ssid_len);
832 if (!req_ssid.ssid_len || req_ssid.ssid[0] < 0x20) {
833 dev_err(priv->adapter->dev, "invalid SSID - aborting\n");
837 /* disconnect before try to associate */
838 mwifiex_deauthenticate(priv, NULL);
841 ret = mwifiex_set_rf_channel(priv, channel,
842 priv->adapter->channel_type);
844 ret = mwifiex_set_encode(priv, NULL, 0, 0, 1); /* Disable keys */
846 if (mode == NL80211_IFTYPE_ADHOC) {
847 /* "privacy" is set only for ad-hoc mode */
850 * Keep WLAN_CIPHER_SUITE_WEP104 for now so that
851 * the firmware can find a matching network from the
852 * scan. The cfg80211 does not give us the encryption
853 * mode at this stage so just setting it to WEP here.
855 priv->sec_info.encryption_mode =
856 WLAN_CIPHER_SUITE_WEP104;
857 priv->sec_info.authentication_mode =
858 NL80211_AUTHTYPE_OPEN_SYSTEM;
864 /* Now handle infra mode. "sme" is valid for infra mode only */
865 if (sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC
866 || sme->auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM)
867 auth_type = NL80211_AUTHTYPE_OPEN_SYSTEM;
868 else if (sme->auth_type == NL80211_AUTHTYPE_SHARED_KEY)
869 auth_type = NL80211_AUTHTYPE_SHARED_KEY;
871 if (sme->crypto.n_ciphers_pairwise) {
872 priv->sec_info.encryption_mode =
873 sme->crypto.ciphers_pairwise[0];
874 priv->sec_info.authentication_mode = auth_type;
877 if (sme->crypto.cipher_group) {
878 priv->sec_info.encryption_mode = sme->crypto.cipher_group;
879 priv->sec_info.authentication_mode = auth_type;
882 ret = mwifiex_set_gen_ie(priv, sme->ie, sme->ie_len);
885 if (mwifiex_is_alg_wep(priv->sec_info.encryption_mode)) {
886 dev_dbg(priv->adapter->dev,
887 "info: setting wep encryption"
888 " with key len %d\n", sme->key_len);
889 ret = mwifiex_set_encode(priv, sme->key, sme->key_len,
894 /* Do specific SSID scanning */
895 if (mwifiex_request_scan(priv, &req_ssid)) {
896 dev_err(priv->adapter->dev, "scan error\n");
901 * Scan entries are valid for some time (15 sec). So we can save one
902 * active scan time if we just try cfg80211_get_bss first. If it fails
903 * then request scan and cfg80211_get_bss() again for final output.
906 if (is_scanning_required) {
907 /* Do specific SSID scanning */
908 if (mwifiex_request_scan(priv, &req_ssid)) {
909 dev_err(priv->adapter->dev, "scan error\n");
914 /* Find the BSS we want using available scan results */
915 if (mode == NL80211_IFTYPE_ADHOC)
916 bss = cfg80211_get_bss(priv->wdev->wiphy, channel,
917 bssid, ssid, ssid_len,
918 WLAN_CAPABILITY_IBSS,
919 WLAN_CAPABILITY_IBSS);
921 bss = cfg80211_get_bss(priv->wdev->wiphy, channel,
922 bssid, ssid, ssid_len,
924 WLAN_CAPABILITY_ESS);
927 if (is_scanning_required) {
928 dev_warn(priv->adapter->dev, "assoc: requested "
929 "bss not found in scan results\n");
932 is_scanning_required = 1;
934 dev_dbg(priv->adapter->dev, "info: trying to associate to %s and bssid %pM\n",
935 (char *) req_ssid.ssid, bss->bssid);
936 memcpy(&priv->cfg_bssid, bss->bssid, ETH_ALEN);
941 if (mwifiex_bss_start(priv, bss, &req_ssid))
944 if (mode == NL80211_IFTYPE_ADHOC) {
945 /* Inform the BSS information to kernel, otherwise
946 * kernel will give a panic after successful assoc */
947 if (mwifiex_cfg80211_inform_ibss_bss(priv))
955 * CFG802.11 operation handler for association request.
957 * This function does not work when the current mode is set to Ad-Hoc, or
958 * when there is already an association procedure going on. The given BSS
959 * information is used to associate.
962 mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
963 struct cfg80211_connect_params *sme)
965 struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
968 if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
969 wiphy_err(wiphy, "received infra assoc request "
970 "when station is in ibss mode\n");
974 wiphy_dbg(wiphy, "info: Trying to associate to %s and bssid %pM\n",
975 (char *) sme->ssid, sme->bssid);
977 ret = mwifiex_cfg80211_assoc(priv, sme->ssid_len, sme->ssid, sme->bssid,
978 priv->bss_mode, sme->channel, sme, 0);
981 cfg80211_connect_result(priv->netdev, priv->cfg_bssid, NULL, 0,
982 NULL, 0, WLAN_STATUS_SUCCESS,
984 dev_dbg(priv->adapter->dev,
985 "info: associated to bssid %pM successfully\n",
988 dev_dbg(priv->adapter->dev,
989 "info: association to bssid %pM failed\n",
991 memset(priv->cfg_bssid, 0, ETH_ALEN);
998 * CFG802.11 operation handler to join an IBSS.
1000 * This function does not work in any mode other than Ad-Hoc, or if
1001 * a join operation is already in progress.
1004 mwifiex_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
1005 struct cfg80211_ibss_params *params)
1007 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
1010 if (priv->bss_mode != NL80211_IFTYPE_ADHOC) {
1011 wiphy_err(wiphy, "request to join ibss received "
1012 "when station is not in ibss mode\n");
1016 wiphy_dbg(wiphy, "info: trying to join to %s and bssid %pM\n",
1017 (char *) params->ssid, params->bssid);
1019 ret = mwifiex_cfg80211_assoc(priv, params->ssid_len, params->ssid,
1020 params->bssid, priv->bss_mode,
1021 params->channel, NULL, params->privacy);
1024 cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid, GFP_KERNEL);
1025 dev_dbg(priv->adapter->dev,
1026 "info: joined/created adhoc network with bssid"
1027 " %pM successfully\n", priv->cfg_bssid);
1029 dev_dbg(priv->adapter->dev,
1030 "info: failed creating/joining adhoc network\n");
1037 * CFG802.11 operation handler to leave an IBSS.
1039 * This function does not work if a leave operation is
1040 * already in progress.
1043 mwifiex_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
1045 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
1047 wiphy_dbg(wiphy, "info: disconnecting from essid %pM\n",
1049 if (mwifiex_deauthenticate(priv, NULL))
1052 memset(priv->cfg_bssid, 0, ETH_ALEN);
1058 * CFG802.11 operation handler for scan request.
1060 * This function issues a scan request to the firmware based upon
1061 * the user specified scan configuration. On successfull completion,
1062 * it also informs the results.
1065 mwifiex_cfg80211_scan(struct wiphy *wiphy, struct net_device *dev,
1066 struct cfg80211_scan_request *request)
1068 struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
1070 struct ieee80211_channel *chan;
1072 wiphy_dbg(wiphy, "info: received scan request on %s\n", dev->name);
1074 priv->scan_request = request;
1076 priv->user_scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg),
1078 if (!priv->user_scan_cfg) {
1079 dev_err(priv->adapter->dev, "failed to alloc scan_req\n");
1082 for (i = 0; i < request->n_ssids; i++) {
1083 memcpy(priv->user_scan_cfg->ssid_list[i].ssid,
1084 request->ssids[i].ssid, request->ssids[i].ssid_len);
1085 priv->user_scan_cfg->ssid_list[i].max_len =
1086 request->ssids[i].ssid_len;
1088 for (i = 0; i < request->n_channels; i++) {
1089 chan = request->channels[i];
1090 priv->user_scan_cfg->chan_list[i].chan_number = chan->hw_value;
1091 priv->user_scan_cfg->chan_list[i].radio_type = chan->band;
1093 if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
1094 priv->user_scan_cfg->chan_list[i].scan_type =
1095 MWIFIEX_SCAN_TYPE_PASSIVE;
1097 priv->user_scan_cfg->chan_list[i].scan_type =
1098 MWIFIEX_SCAN_TYPE_ACTIVE;
1100 priv->user_scan_cfg->chan_list[i].scan_time = 0;
1102 if (mwifiex_set_user_scan_ioctl(priv, priv->user_scan_cfg))
1109 * This function sets up the CFG802.11 specific HT capability fields
1110 * with default values.
1112 * The following default values are set -
1113 * - HT Supported = True
1114 * - Maximum AMPDU length factor = IEEE80211_HT_MAX_AMPDU_64K
1115 * - Minimum AMPDU spacing = IEEE80211_HT_MPDU_DENSITY_NONE
1116 * - HT Capabilities supported by firmware
1117 * - MCS information, Rx mask = 0xff
1118 * - MCD information, Tx parameters = IEEE80211_HT_MCS_TX_DEFINED (0x01)
1121 mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info,
1122 struct mwifiex_private *priv)
1125 struct ieee80211_mcs_info mcs_set;
1126 u8 *mcs = (u8 *)&mcs_set;
1127 struct mwifiex_adapter *adapter = priv->adapter;
1129 ht_info->ht_supported = true;
1130 ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
1131 ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE;
1133 memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
1135 /* Fill HT capability information */
1136 if (ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap))
1137 ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
1139 ht_info->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
1141 if (ISSUPP_SHORTGI20(adapter->hw_dot_11n_dev_cap))
1142 ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
1144 ht_info->cap &= ~IEEE80211_HT_CAP_SGI_20;
1146 if (ISSUPP_SHORTGI40(adapter->hw_dot_11n_dev_cap))
1147 ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
1149 ht_info->cap &= ~IEEE80211_HT_CAP_SGI_40;
1151 if (ISSUPP_RXSTBC(adapter->hw_dot_11n_dev_cap))
1152 ht_info->cap |= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT;
1154 ht_info->cap &= ~(3 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
1156 if (ISSUPP_TXSTBC(adapter->hw_dot_11n_dev_cap))
1157 ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
1159 ht_info->cap &= ~IEEE80211_HT_CAP_TX_STBC;
1161 ht_info->cap &= ~IEEE80211_HT_CAP_MAX_AMSDU;
1162 ht_info->cap |= IEEE80211_HT_CAP_SM_PS;
1164 rx_mcs_supp = GET_RXMCSSUPP(adapter->hw_dev_mcs_support);
1165 /* Set MCS for 1x1 */
1166 memset(mcs, 0xff, rx_mcs_supp);
1167 /* Clear all the other values */
1168 memset(&mcs[rx_mcs_supp], 0,
1169 sizeof(struct ieee80211_mcs_info) - rx_mcs_supp);
1170 if (priv->bss_mode == NL80211_IFTYPE_STATION ||
1171 ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap))
1172 /* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */
1173 SETHT_MCS32(mcs_set.rx_mask);
1175 memcpy((u8 *) &ht_info->mcs, mcs, sizeof(struct ieee80211_mcs_info));
1177 ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
1181 * create a new virtual interface with the given name
1183 struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy,
1185 enum nl80211_iftype type,
1187 struct vif_params *params)
1189 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
1190 struct mwifiex_adapter *adapter;
1191 struct net_device *dev;
1197 adapter = priv->adapter;
1202 case NL80211_IFTYPE_UNSPECIFIED:
1203 case NL80211_IFTYPE_STATION:
1204 case NL80211_IFTYPE_ADHOC:
1205 if (priv->bss_mode) {
1206 wiphy_err(wiphy, "cannot create multiple"
1207 " station/adhoc interfaces\n");
1211 if (type == NL80211_IFTYPE_UNSPECIFIED)
1212 priv->bss_mode = NL80211_IFTYPE_STATION;
1214 priv->bss_mode = type;
1216 priv->bss_type = MWIFIEX_BSS_TYPE_STA;
1217 priv->frame_type = MWIFIEX_DATA_FRAME_TYPE_ETH_II;
1218 priv->bss_priority = 0;
1219 priv->bss_role = MWIFIEX_BSS_ROLE_STA;
1220 priv->bss_index = 0;
1225 wiphy_err(wiphy, "type not supported\n");
1229 dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), name,
1232 wiphy_err(wiphy, "no memory available for netdevice\n");
1236 dev_net_set(dev, wiphy_net(wiphy));
1237 dev->ieee80211_ptr = priv->wdev;
1238 dev->ieee80211_ptr->iftype = priv->bss_mode;
1239 memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN);
1240 memcpy(dev->perm_addr, wiphy->perm_addr, ETH_ALEN);
1241 SET_NETDEV_DEV(dev, wiphy_dev(wiphy));
1243 dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
1244 dev->watchdog_timeo = MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT;
1245 dev->hard_header_len += MWIFIEX_MIN_DATA_HEADER_LEN;
1247 mdev_priv = netdev_priv(dev);
1248 *((unsigned long *) mdev_priv) = (unsigned long) priv;
1251 mwifiex_init_priv_params(priv, dev);
1253 SET_NETDEV_DEV(dev, adapter->dev);
1255 /* Register network device */
1256 if (register_netdevice(dev)) {
1257 wiphy_err(wiphy, "cannot register virtual network device\n");
1261 sema_init(&priv->async_sem, 1);
1262 priv->scan_pending_on_block = false;
1264 dev_dbg(adapter->dev, "info: %s: Marvell 802.11 Adapter\n", dev->name);
1266 #ifdef CONFIG_DEBUG_FS
1267 mwifiex_dev_debugfs_init(priv);
1271 if (dev && (dev->reg_state == NETREG_UNREGISTERED))
1273 priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
1277 EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf);
1280 * del_virtual_intf: remove the virtual interface determined by dev
1282 int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct net_device *dev)
1284 struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy);
1289 #ifdef CONFIG_DEBUG_FS
1290 mwifiex_dev_debugfs_remove(priv);
1293 if (!netif_queue_stopped(priv->netdev))
1294 netif_stop_queue(priv->netdev);
1296 if (netif_carrier_ok(priv->netdev))
1297 netif_carrier_off(priv->netdev);
1299 if (dev->reg_state == NETREG_REGISTERED)
1300 unregister_netdevice(dev);
1302 if (dev->reg_state == NETREG_UNREGISTERED)
1305 /* Clear the priv in adapter */
1306 priv->netdev = NULL;
1308 priv->media_connected = false;
1310 priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
1314 EXPORT_SYMBOL_GPL(mwifiex_del_virtual_intf);
1316 /* station cfg80211 operations */
1317 static struct cfg80211_ops mwifiex_cfg80211_ops = {
1318 .add_virtual_intf = mwifiex_add_virtual_intf,
1319 .del_virtual_intf = mwifiex_del_virtual_intf,
1320 .change_virtual_intf = mwifiex_cfg80211_change_virtual_intf,
1321 .scan = mwifiex_cfg80211_scan,
1322 .connect = mwifiex_cfg80211_connect,
1323 .disconnect = mwifiex_cfg80211_disconnect,
1324 .get_station = mwifiex_cfg80211_get_station,
1325 .set_wiphy_params = mwifiex_cfg80211_set_wiphy_params,
1326 .set_channel = mwifiex_cfg80211_set_channel,
1327 .join_ibss = mwifiex_cfg80211_join_ibss,
1328 .leave_ibss = mwifiex_cfg80211_leave_ibss,
1329 .add_key = mwifiex_cfg80211_add_key,
1330 .del_key = mwifiex_cfg80211_del_key,
1331 .set_default_key = mwifiex_cfg80211_set_default_key,
1332 .set_power_mgmt = mwifiex_cfg80211_set_power_mgmt,
1333 .set_tx_power = mwifiex_cfg80211_set_tx_power,
1334 .set_bitrate_mask = mwifiex_cfg80211_set_bitrate_mask,
1338 * This function registers the device with CFG802.11 subsystem.
1340 * The function creates the wireless device/wiphy, populates it with
1341 * default parameters and handler function pointers, and finally
1342 * registers the device.
1344 int mwifiex_register_cfg80211(struct mwifiex_private *priv)
1348 struct wireless_dev *wdev;
1350 wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
1352 dev_err(priv->adapter->dev, "%s: allocating wireless device\n",
1357 wiphy_new(&mwifiex_cfg80211_ops,
1358 sizeof(struct mwifiex_private *));
1363 wdev->iftype = NL80211_IFTYPE_STATION;
1364 wdev->wiphy->max_scan_ssids = 10;
1365 wdev->wiphy->interface_modes =
1366 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
1368 wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &mwifiex_band_2ghz;
1369 mwifiex_setup_ht_caps(
1370 &wdev->wiphy->bands[IEEE80211_BAND_2GHZ]->ht_cap, priv);
1372 if (priv->adapter->config_bands & BAND_A) {
1373 wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &mwifiex_band_5ghz;
1374 mwifiex_setup_ht_caps(
1375 &wdev->wiphy->bands[IEEE80211_BAND_5GHZ]->ht_cap, priv);
1377 wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
1380 /* Initialize cipher suits */
1381 wdev->wiphy->cipher_suites = mwifiex_cipher_suites;
1382 wdev->wiphy->n_cipher_suites = ARRAY_SIZE(mwifiex_cipher_suites);
1384 memcpy(wdev->wiphy->perm_addr, priv->curr_addr, ETH_ALEN);
1385 wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
1387 /* Reserve space for bss band information */
1388 wdev->wiphy->bss_priv_size = sizeof(u8);
1390 wdev->wiphy->reg_notifier = mwifiex_reg_notifier;
1392 /* Set struct mwifiex_private pointer in wiphy_priv */
1393 wdev_priv = wiphy_priv(wdev->wiphy);
1395 *(unsigned long *) wdev_priv = (unsigned long) priv;
1397 set_wiphy_dev(wdev->wiphy, (struct device *) priv->adapter->dev);
1399 ret = wiphy_register(wdev->wiphy);
1401 dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n",
1403 wiphy_free(wdev->wiphy);
1407 dev_dbg(priv->adapter->dev,
1408 "info: successfully registered wiphy device\n");