2 * Copyright (c) 2010 Broadcom Corporation
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
19 #include <linux/types.h>
20 #include <linux/kernel.h>
21 #include <linux/kthread.h>
22 #include <linux/printk.h>
23 #include <linux/pci_ids.h>
24 #include <linux/netdevice.h>
25 #include <linux/interrupt.h>
26 #include <linux/sched.h>
27 #include <linux/mmc/sdio.h>
28 #include <linux/mmc/sdio_func.h>
29 #include <linux/mmc/card.h>
30 #include <linux/semaphore.h>
31 #include <linux/firmware.h>
32 #include <linux/module.h>
33 #include <linux/bcma/bcma.h>
34 #include <asm/unaligned.h>
36 #include <brcmu_wifi.h>
37 #include <brcmu_utils.h>
38 #include <brcm_hw_ids.h>
40 #include "sdio_host.h"
41 #include "sdio_chip.h"
43 #define DCMD_RESP_TIMEOUT 2000 /* In milli second */
47 #define BRCMF_TRAP_INFO_SIZE 80
49 #define CBUF_LEN (128)
52 __le32 buf; /* Can't be pointer on (64-bit) hosts */
55 char *_buf_compat; /* Redundant pointer for backward compat. */
60 * When there is no UART (e.g. Quickturn),
61 * the host should write a complete
62 * input line directly into cbuf and then write
63 * the length into vcons_in.
64 * This may also be used when there is a real UART
65 * (at risk of conflicting with
66 * the real UART). vcons_out is currently unused.
71 /* Output (logging) buffer
72 * Console output is written to a ring buffer log_buf at index log_idx.
73 * The host may read the output when it sees log_idx advance.
74 * Output will be lost if the output wraps around faster than the host
77 struct rte_log_le log_le;
79 /* Console input line buffer
80 * Characters are read one at a time into cbuf
81 * until <CR> is received, then
82 * the buffer is processed as a command line.
83 * Also used for virtual UART.
90 #include <chipcommon.h>
95 #define TXQLEN 2048 /* bulk tx queue length */
96 #define TXHI (TXQLEN - 256) /* turn on flow control above TXHI */
97 #define TXLOW (TXHI - 256) /* turn off flow control below TXLOW */
100 #define TXRETRIES 2 /* # of retries for tx frames */
102 #define BRCMF_RXBOUND 50 /* Default for max rx frames in
105 #define BRCMF_TXBOUND 20 /* Default for max tx frames in
108 #define BRCMF_TXMINMAX 1 /* Max tx frames if rx still pending */
110 #define MEMBLOCK 2048 /* Block size used for downloading
112 #define MAX_DATA_BUF (32 * 1024) /* Must be large enough to hold
113 biggest possible glom */
115 #define BRCMF_FIRSTREAD (1 << 6)
118 /* SBSDIO_DEVICE_CTL */
120 /* 1: device will assert busy signal when receiving CMD53 */
121 #define SBSDIO_DEVCTL_SETBUSY 0x01
122 /* 1: assertion of sdio interrupt is synchronous to the sdio clock */
123 #define SBSDIO_DEVCTL_SPI_INTR_SYNC 0x02
124 /* 1: mask all interrupts to host except the chipActive (rev 8) */
125 #define SBSDIO_DEVCTL_CA_INT_ONLY 0x04
126 /* 1: isolate internal sdio signals, put external pads in tri-state; requires
127 * sdio bus power cycle to clear (rev 9) */
128 #define SBSDIO_DEVCTL_PADS_ISO 0x08
129 /* Force SD->SB reset mapping (rev 11) */
130 #define SBSDIO_DEVCTL_SB_RST_CTL 0x30
131 /* Determined by CoreControl bit */
132 #define SBSDIO_DEVCTL_RST_CORECTL 0x00
133 /* Force backplane reset */
134 #define SBSDIO_DEVCTL_RST_BPRESET 0x10
135 /* Force no backplane reset */
136 #define SBSDIO_DEVCTL_RST_NOBPRESET 0x20
138 /* direct(mapped) cis space */
140 /* MAPPED common CIS address */
141 #define SBSDIO_CIS_BASE_COMMON 0x1000
142 /* maximum bytes in one CIS */
143 #define SBSDIO_CIS_SIZE_LIMIT 0x200
144 /* cis offset addr is < 17 bits */
145 #define SBSDIO_CIS_OFT_ADDR_MASK 0x1FFFF
147 /* manfid tuple length, include tuple, link bytes */
148 #define SBSDIO_CIS_MANFID_TUPLE_LEN 6
151 #define I_SMB_SW0 (1 << 0) /* To SB Mail S/W interrupt 0 */
152 #define I_SMB_SW1 (1 << 1) /* To SB Mail S/W interrupt 1 */
153 #define I_SMB_SW2 (1 << 2) /* To SB Mail S/W interrupt 2 */
154 #define I_SMB_SW3 (1 << 3) /* To SB Mail S/W interrupt 3 */
155 #define I_SMB_SW_MASK 0x0000000f /* To SB Mail S/W interrupts mask */
156 #define I_SMB_SW_SHIFT 0 /* To SB Mail S/W interrupts shift */
157 #define I_HMB_SW0 (1 << 4) /* To Host Mail S/W interrupt 0 */
158 #define I_HMB_SW1 (1 << 5) /* To Host Mail S/W interrupt 1 */
159 #define I_HMB_SW2 (1 << 6) /* To Host Mail S/W interrupt 2 */
160 #define I_HMB_SW3 (1 << 7) /* To Host Mail S/W interrupt 3 */
161 #define I_HMB_SW_MASK 0x000000f0 /* To Host Mail S/W interrupts mask */
162 #define I_HMB_SW_SHIFT 4 /* To Host Mail S/W interrupts shift */
163 #define I_WR_OOSYNC (1 << 8) /* Write Frame Out Of Sync */
164 #define I_RD_OOSYNC (1 << 9) /* Read Frame Out Of Sync */
165 #define I_PC (1 << 10) /* descriptor error */
166 #define I_PD (1 << 11) /* data error */
167 #define I_DE (1 << 12) /* Descriptor protocol Error */
168 #define I_RU (1 << 13) /* Receive descriptor Underflow */
169 #define I_RO (1 << 14) /* Receive fifo Overflow */
170 #define I_XU (1 << 15) /* Transmit fifo Underflow */
171 #define I_RI (1 << 16) /* Receive Interrupt */
172 #define I_BUSPWR (1 << 17) /* SDIO Bus Power Change (rev 9) */
173 #define I_XMTDATA_AVAIL (1 << 23) /* bits in fifo */
174 #define I_XI (1 << 24) /* Transmit Interrupt */
175 #define I_RF_TERM (1 << 25) /* Read Frame Terminate */
176 #define I_WF_TERM (1 << 26) /* Write Frame Terminate */
177 #define I_PCMCIA_XU (1 << 27) /* PCMCIA Transmit FIFO Underflow */
178 #define I_SBINT (1 << 28) /* sbintstatus Interrupt */
179 #define I_CHIPACTIVE (1 << 29) /* chip from doze to active state */
180 #define I_SRESET (1 << 30) /* CCCR RES interrupt */
181 #define I_IOE2 (1U << 31) /* CCCR IOE2 Bit Changed */
182 #define I_ERRORS (I_PC | I_PD | I_DE | I_RU | I_RO | I_XU)
183 #define I_DMA (I_RI | I_XI | I_ERRORS)
186 #define CC_CISRDY (1 << 0) /* CIS Ready */
187 #define CC_BPRESEN (1 << 1) /* CCCR RES signal */
188 #define CC_F2RDY (1 << 2) /* set CCCR IOR2 bit */
189 #define CC_CLRPADSISO (1 << 3) /* clear SDIO pads isolation */
190 #define CC_XMTDATAAVAIL_MODE (1 << 4)
191 #define CC_XMTDATAAVAIL_CTRL (1 << 5)
194 #define SFC_RF_TERM (1 << 0) /* Read Frame Terminate */
195 #define SFC_WF_TERM (1 << 1) /* Write Frame Terminate */
196 #define SFC_CRC4WOOS (1 << 2) /* CRC error for write out of sync */
197 #define SFC_ABORTALL (1 << 3) /* Abort all in-progress frames */
200 #define SDPCM_FRAMETAG_LEN 4 /* 2 bytes len, 2 bytes check val */
202 /* Total length of frame header for dongle protocol */
203 #define SDPCM_HDRLEN (SDPCM_FRAMETAG_LEN + SDPCM_SWHEADER_LEN)
204 #define SDPCM_RESERVE (SDPCM_HDRLEN + BRCMF_SDALIGN)
207 * Software allocation of To SB Mailbox resources
210 /* tosbmailbox bits corresponding to intstatus bits */
211 #define SMB_NAK (1 << 0) /* Frame NAK */
212 #define SMB_INT_ACK (1 << 1) /* Host Interrupt ACK */
213 #define SMB_USE_OOB (1 << 2) /* Use OOB Wakeup */
214 #define SMB_DEV_INT (1 << 3) /* Miscellaneous Interrupt */
216 /* tosbmailboxdata */
217 #define SMB_DATA_VERSION_SHIFT 16 /* host protocol version */
220 * Software allocation of To Host Mailbox resources
224 #define I_HMB_FC_STATE I_HMB_SW0 /* Flow Control State */
225 #define I_HMB_FC_CHANGE I_HMB_SW1 /* Flow Control State Changed */
226 #define I_HMB_FRAME_IND I_HMB_SW2 /* Frame Indication */
227 #define I_HMB_HOST_INT I_HMB_SW3 /* Miscellaneous Interrupt */
229 /* tohostmailboxdata */
230 #define HMB_DATA_NAKHANDLED 1 /* retransmit NAK'd frame */
231 #define HMB_DATA_DEVREADY 2 /* talk to host after enable */
232 #define HMB_DATA_FC 4 /* per prio flowcontrol update flag */
233 #define HMB_DATA_FWREADY 8 /* fw ready for protocol activity */
235 #define HMB_DATA_FCDATA_MASK 0xff000000
236 #define HMB_DATA_FCDATA_SHIFT 24
238 #define HMB_DATA_VERSION_MASK 0x00ff0000
239 #define HMB_DATA_VERSION_SHIFT 16
242 * Software-defined protocol header
245 /* Current protocol version */
246 #define SDPCM_PROT_VERSION 4
248 /* SW frame header */
249 #define SDPCM_PACKET_SEQUENCE(p) (((u8 *)p)[0] & 0xff)
251 #define SDPCM_CHANNEL_MASK 0x00000f00
252 #define SDPCM_CHANNEL_SHIFT 8
253 #define SDPCM_PACKET_CHANNEL(p) (((u8 *)p)[1] & 0x0f)
255 #define SDPCM_NEXTLEN_OFFSET 2
257 /* Data Offset from SOF (HW Tag, SW Tag, Pad) */
258 #define SDPCM_DOFFSET_OFFSET 3 /* Data Offset */
259 #define SDPCM_DOFFSET_VALUE(p) (((u8 *)p)[SDPCM_DOFFSET_OFFSET] & 0xff)
260 #define SDPCM_DOFFSET_MASK 0xff000000
261 #define SDPCM_DOFFSET_SHIFT 24
262 #define SDPCM_FCMASK_OFFSET 4 /* Flow control */
263 #define SDPCM_FCMASK_VALUE(p) (((u8 *)p)[SDPCM_FCMASK_OFFSET] & 0xff)
264 #define SDPCM_WINDOW_OFFSET 5 /* Credit based fc */
265 #define SDPCM_WINDOW_VALUE(p) (((u8 *)p)[SDPCM_WINDOW_OFFSET] & 0xff)
267 #define SDPCM_SWHEADER_LEN 8 /* SW header is 64 bits */
269 /* logical channel numbers */
270 #define SDPCM_CONTROL_CHANNEL 0 /* Control channel Id */
271 #define SDPCM_EVENT_CHANNEL 1 /* Asyc Event Indication Channel Id */
272 #define SDPCM_DATA_CHANNEL 2 /* Data Xmit/Recv Channel Id */
273 #define SDPCM_GLOM_CHANNEL 3 /* For coalesced packets */
274 #define SDPCM_TEST_CHANNEL 15 /* Reserved for test/debug packets */
276 #define SDPCM_SEQUENCE_WRAP 256 /* wrap-around val for 8bit frame seq */
278 #define SDPCM_GLOMDESC(p) (((u8 *)p)[1] & 0x80)
281 * Shared structure between dongle and the host.
282 * The structure contains pointers to trap or assert information.
284 #define SDPCM_SHARED_VERSION 0x0002
285 #define SDPCM_SHARED_VERSION_MASK 0x00FF
286 #define SDPCM_SHARED_ASSERT_BUILT 0x0100
287 #define SDPCM_SHARED_ASSERT 0x0200
288 #define SDPCM_SHARED_TRAP 0x0400
290 /* Space for header read, limit for data packets */
291 #define MAX_HDR_READ (1 << 6)
292 #define MAX_RX_DATASZ 2048
294 /* Maximum milliseconds to wait for F2 to come up */
295 #define BRCMF_WAIT_F2RDY 3000
297 /* Bump up limit on waiting for HT to account for first startup;
298 * if the image is doing a CRC calculation before programming the PMU
299 * for HT availability, it could take a couple hundred ms more, so
300 * max out at a 1 second (1000000us).
302 #undef PMU_MAX_TRANSITION_DLY
303 #define PMU_MAX_TRANSITION_DLY 1000000
305 /* Value for ChipClockCSR during initial setup */
306 #define BRCMF_INIT_CLKCTL1 (SBSDIO_FORCE_HW_CLKREQ_OFF | \
307 SBSDIO_ALP_AVAIL_REQ)
309 /* Flags for SDH calls */
310 #define F2SYNC (SDIO_REQ_4BYTE | SDIO_REQ_FIXED)
312 #define BRCMF_SDIO_FW_NAME "brcm/brcmfmac-sdio.bin"
313 #define BRCMF_SDIO_NV_NAME "brcm/brcmfmac-sdio.txt"
314 MODULE_FIRMWARE(BRCMF_SDIO_FW_NAME);
315 MODULE_FIRMWARE(BRCMF_SDIO_NV_NAME);
317 #define BRCMF_IDLE_IMMEDIATE (-1) /* Enter idle immediately */
318 #define BRCMF_IDLE_ACTIVE 0 /* Do not request any SD clock change
321 #define BRCMF_IDLE_INTERVAL 1
324 * Conversion of 802.1D priority to precedence level
326 static uint prio2prec(u32 prio)
328 return (prio == PRIO_8021D_NONE || prio == PRIO_8021D_BE) ?
334 u32 corecontrol; /* 0x00, rev8 */
335 u32 corestatus; /* rev8 */
337 u32 biststatus; /* rev8 */
340 u16 pcmciamesportaladdr; /* 0x010, rev8 */
342 u16 pcmciamesportalmask; /* rev8 */
344 u16 pcmciawrframebc; /* rev8 */
346 u16 pcmciaunderflowtimer; /* rev8 */
350 u32 intstatus; /* 0x020, rev8 */
351 u32 hostintmask; /* rev8 */
352 u32 intmask; /* rev8 */
353 u32 sbintstatus; /* rev8 */
354 u32 sbintmask; /* rev8 */
355 u32 funcintmask; /* rev4 */
357 u32 tosbmailbox; /* 0x040, rev8 */
358 u32 tohostmailbox; /* rev8 */
359 u32 tosbmailboxdata; /* rev8 */
360 u32 tohostmailboxdata; /* rev8 */
362 /* synchronized access to registers in SDIO clock domain */
363 u32 sdioaccess; /* 0x050, rev8 */
366 /* PCMCIA frame control */
367 u8 pcmciaframectrl; /* 0x060, rev8 */
369 u8 pcmciawatermark; /* rev8 */
372 /* interrupt batching control */
373 u32 intrcvlazy; /* 0x100, rev8 */
377 u32 cmd52rd; /* 0x110, rev8 */
378 u32 cmd52wr; /* rev8 */
379 u32 cmd53rd; /* rev8 */
380 u32 cmd53wr; /* rev8 */
381 u32 abort; /* rev8 */
382 u32 datacrcerror; /* rev8 */
383 u32 rdoutofsync; /* rev8 */
384 u32 wroutofsync; /* rev8 */
385 u32 writebusy; /* rev8 */
386 u32 readwait; /* rev8 */
387 u32 readterm; /* rev8 */
388 u32 writeterm; /* rev8 */
390 u32 clockctlstatus; /* rev8 */
393 u32 PAD[128]; /* DMA engines */
395 /* SDIO/PCMCIA CIS region */
396 char cis[512]; /* 0x400-0x5ff, rev6 */
398 /* PCMCIA function control registers */
399 char pcmciafcr[256]; /* 0x600-6ff, rev6 */
402 /* PCMCIA backplane access */
403 u16 backplanecsr; /* 0x76E, rev6 */
404 u16 backplaneaddr0; /* rev6 */
405 u16 backplaneaddr1; /* rev6 */
406 u16 backplaneaddr2; /* rev6 */
407 u16 backplaneaddr3; /* rev6 */
408 u16 backplanedata0; /* rev6 */
409 u16 backplanedata1; /* rev6 */
410 u16 backplanedata2; /* rev6 */
411 u16 backplanedata3; /* rev6 */
414 /* sprom "size" & "blank" info */
415 u16 spromstatus; /* 0x7BE, rev2 */
422 /* Device console log buffer state */
423 struct brcmf_console {
424 uint count; /* Poll interval msec counter */
425 uint log_addr; /* Log struct address (fixed) */
426 struct rte_log_le log_le; /* Log struct (host copy) */
427 uint bufsize; /* Size of log buffer */
428 u8 *buf; /* Log buffer (host copy) */
429 uint last; /* Last buffer read index */
433 struct sdpcm_shared {
437 u32 assert_file_addr;
439 u32 console_addr; /* Address of struct rte_console */
444 struct sdpcm_shared_le {
447 __le32 assert_exp_addr;
448 __le32 assert_file_addr;
450 __le32 console_addr; /* Address of struct rte_console */
451 __le32 msgtrace_addr;
456 /* misc chip info needed by some of the routines */
457 /* Private data for SDIO bus interaction */
459 struct brcmf_sdio_dev *sdiodev; /* sdio device handler */
460 struct chip_info *ci; /* Chip info struct */
461 char *vars; /* Variables (from CIS and/or other) */
462 uint varsz; /* Size of variables buffer */
464 u32 ramsize; /* Size of RAM in SOCRAM (bytes) */
466 u32 hostintmask; /* Copy of Host Interrupt Mask */
467 u32 intstatus; /* Intstatus bits (events) pending */
468 bool dpc_sched; /* Indicates DPC schedule (intrpt rcvd) */
469 bool fcstate; /* State of dongle flow-control */
471 uint blocksize; /* Block size of SDIO transfers */
472 uint roundup; /* Max roundup limit */
474 struct pktq txq; /* Queue length used for flow-control */
475 u8 flowcontrol; /* per prio flow control bitmask */
476 u8 tx_seq; /* Transmit sequence number (next) */
477 u8 tx_max; /* Maximum transmit sequence allowed */
479 u8 hdrbuf[MAX_HDR_READ + BRCMF_SDALIGN];
480 u8 *rxhdr; /* Header of current rx frame (in hdrbuf) */
481 u16 nextlen; /* Next Read Len from last header */
482 u8 rx_seq; /* Receive sequence number (expected) */
483 bool rxskip; /* Skip receive (awaiting NAK ACK) */
485 uint rxbound; /* Rx frames to read before resched */
486 uint txbound; /* Tx frames to send before resched */
489 struct sk_buff *glomd; /* Packet containing glomming descriptor */
490 struct sk_buff_head glom; /* Packet list for glommed superframe */
491 uint glomerr; /* Glom packet read errors */
493 u8 *rxbuf; /* Buffer for receiving control packets */
494 uint rxblen; /* Allocated length of rxbuf */
495 u8 *rxctl; /* Aligned pointer into rxbuf */
496 u8 *databuf; /* Buffer for receiving big glom packet */
497 u8 *dataptr; /* Aligned pointer into databuf */
498 uint rxlen; /* Length of valid data in buffer */
500 u8 sdpcm_ver; /* Bus protocol reported by dongle */
502 bool intr; /* Use interrupts */
503 bool poll; /* Use polling */
504 bool ipend; /* Device interrupt is pending */
505 uint intrcount; /* Count of device interrupt callbacks */
506 uint lastintrs; /* Count as of last watchdog timer */
507 uint spurious; /* Count of spurious interrupts */
508 uint pollrate; /* Ticks between device polls */
509 uint polltick; /* Tick counter */
510 uint pollcnt; /* Count of active polls */
513 uint console_interval;
514 struct brcmf_console console; /* Console output polling support */
515 uint console_addr; /* Console address from shared struct */
518 uint regfails; /* Count of R_REG failures */
520 uint clkstate; /* State of sd and backplane clock(s) */
521 bool activity; /* Activity flag for clock down */
522 s32 idletime; /* Control for activity timeout */
523 s32 idlecount; /* Activity timeout counter */
524 s32 idleclock; /* How to set bus driver when idle */
526 bool use_rxchain; /* If brcmf should use PKT chains */
527 bool sleeping; /* Is SDIO bus sleeping? */
528 bool rxflow_mode; /* Rx flow control mode */
529 bool rxflow; /* Is rx flow control on */
530 bool alp_only; /* Don't use HT clock (ALP only) */
531 /* Field to decide if rx of control frames happen in rxbuf or lb-pool */
534 /* Some additional counters */
535 uint tx_sderrs; /* Count of tx attempts with sd errors */
536 uint fcqueued; /* Tx packets that got queued */
537 uint rxrtx; /* Count of rtx requests (NAK to dongle) */
538 uint rx_toolong; /* Receive frames too long to receive */
539 uint rxc_errors; /* SDIO errors when reading control frames */
540 uint rx_hdrfail; /* SDIO errors on header reads */
541 uint rx_badhdr; /* Bad received headers (roosync?) */
542 uint rx_badseq; /* Mismatched rx sequence number */
543 uint fc_rcvd; /* Number of flow-control events received */
544 uint fc_xoff; /* Number which turned on flow-control */
545 uint fc_xon; /* Number which turned off flow-control */
546 uint rxglomfail; /* Failed deglom attempts */
547 uint rxglomframes; /* Number of glom frames (superframes) */
548 uint rxglompkts; /* Number of packets from glom frames */
549 uint f2rxhdrs; /* Number of header reads */
550 uint f2rxdata; /* Number of frame data reads */
551 uint f2txdata; /* Number of f2 frame writes */
552 uint f1regdata; /* Number of f1 register accesses */
553 uint tickcnt; /* Number of watchdog been schedule */
554 unsigned long tx_ctlerrs; /* Err of sending ctrl frames */
555 unsigned long tx_ctlpkts; /* Ctrl frames sent to dongle */
556 unsigned long rx_ctlerrs; /* Err of processing rx ctrl frames */
557 unsigned long rx_ctlpkts; /* Ctrl frames processed from dongle */
558 unsigned long rx_readahead_cnt; /* Number of packets where header
559 * read-ahead was used. */
563 bool ctrl_frame_stat;
566 wait_queue_head_t ctrl_wait;
567 wait_queue_head_t dcmd_resp_wait;
569 struct timer_list timer;
570 struct completion watchdog_wait;
571 struct task_struct *watchdog_tsk;
575 struct task_struct *dpc_tsk;
576 struct completion dpc_wait;
577 struct list_head dpc_tsklst;
578 spinlock_t dpc_tl_lock;
580 struct semaphore sdsem;
582 const struct firmware *firmware;
585 bool txoff; /* Transmit flow-controlled */
591 #define CLK_PENDING 2 /* Not used yet */
595 static int qcount[NUMPRIO];
596 static int tx_packets[NUMPRIO];
599 #define SDIO_DRIVE_STRENGTH 6 /* in milliamps */
601 #define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL)
603 /* Retry count for register access failures */
604 static const uint retry_limit = 2;
606 /* Limit on rounding up frames */
607 static const uint max_roundup = 512;
611 static void pkt_align(struct sk_buff *p, int len, int align)
614 datalign = (unsigned long)(p->data);
615 datalign = roundup(datalign, (align)) - datalign;
617 skb_pull(p, datalign);
621 /* To check if there's window offered */
622 static bool data_ok(struct brcmf_sdio *bus)
624 return (u8)(bus->tx_max - bus->tx_seq) != 0 &&
625 ((u8)(bus->tx_max - bus->tx_seq) & 0x80) == 0;
629 * Reads a register in the SDIO hardware block. This block occupies a series of
630 * adresses on the 32 bit backplane bus.
633 r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
635 u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
638 *regvar = brcmf_sdio_regrl(bus->sdiodev,
639 bus->ci->c_inf[idx].base + offset, &ret);
645 w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
647 u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
650 brcmf_sdio_regwl(bus->sdiodev,
651 bus->ci->c_inf[idx].base + reg_offset,
657 #define PKT_AVAILABLE() (intstatus & I_HMB_FRAME_IND)
659 #define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE)
661 /* Packet free applicable unconditionally for sdio and sdspi.
662 * Conditional if bufpool was present for gspi bus.
664 static void brcmf_sdbrcm_pktfree2(struct brcmf_sdio *bus, struct sk_buff *pkt)
667 brcmu_pkt_buf_free_skb(pkt);
670 /* Turn backplane clock on or off */
671 static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
674 u8 clkctl, clkreq, devctl;
675 unsigned long timeout;
677 brcmf_dbg(TRACE, "Enter\n");
682 /* Request HT Avail */
684 bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
686 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
689 brcmf_dbg(ERROR, "HT Avail request error: %d\n", err);
693 /* Check current status */
694 clkctl = brcmf_sdio_regrb(bus->sdiodev,
695 SBSDIO_FUNC1_CHIPCLKCSR, &err);
697 brcmf_dbg(ERROR, "HT Avail read error: %d\n", err);
701 /* Go to pending and await interrupt if appropriate */
702 if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
703 /* Allow only clock-available interrupt */
704 devctl = brcmf_sdio_regrb(bus->sdiodev,
705 SBSDIO_DEVICE_CTL, &err);
707 brcmf_dbg(ERROR, "Devctl error setting CA: %d\n",
712 devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
713 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
715 brcmf_dbg(INFO, "CLKCTL: set PENDING\n");
716 bus->clkstate = CLK_PENDING;
719 } else if (bus->clkstate == CLK_PENDING) {
720 /* Cancel CA-only interrupt filter */
721 devctl = brcmf_sdio_regrb(bus->sdiodev,
722 SBSDIO_DEVICE_CTL, &err);
723 devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
724 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
728 /* Otherwise, wait here (polling) for HT Avail */
730 msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
731 while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
732 clkctl = brcmf_sdio_regrb(bus->sdiodev,
733 SBSDIO_FUNC1_CHIPCLKCSR,
735 if (time_after(jiffies, timeout))
738 usleep_range(5000, 10000);
741 brcmf_dbg(ERROR, "HT Avail request error: %d\n", err);
744 if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
745 brcmf_dbg(ERROR, "HT Avail timeout (%d): clkctl 0x%02x\n",
746 PMU_MAX_TRANSITION_DLY, clkctl);
750 /* Mark clock available */
751 bus->clkstate = CLK_AVAIL;
752 brcmf_dbg(INFO, "CLKCTL: turned ON\n");
755 if (!bus->alp_only) {
756 if (SBSDIO_ALPONLY(clkctl))
757 brcmf_dbg(ERROR, "HT Clock should be on\n");
759 #endif /* defined (DEBUG) */
761 bus->activity = true;
765 if (bus->clkstate == CLK_PENDING) {
766 /* Cancel CA-only interrupt filter */
767 devctl = brcmf_sdio_regrb(bus->sdiodev,
768 SBSDIO_DEVICE_CTL, &err);
769 devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
770 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
774 bus->clkstate = CLK_SDONLY;
775 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
777 brcmf_dbg(INFO, "CLKCTL: turned OFF\n");
779 brcmf_dbg(ERROR, "Failed access turning clock off: %d\n",
787 /* Change idle/active SD state */
788 static int brcmf_sdbrcm_sdclk(struct brcmf_sdio *bus, bool on)
790 brcmf_dbg(TRACE, "Enter\n");
793 bus->clkstate = CLK_SDONLY;
795 bus->clkstate = CLK_NONE;
800 /* Transition SD and backplane clock readiness */
801 static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
804 uint oldstate = bus->clkstate;
807 brcmf_dbg(TRACE, "Enter\n");
809 /* Early exit if we're already there */
810 if (bus->clkstate == target) {
811 if (target == CLK_AVAIL) {
812 brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
813 bus->activity = true;
820 /* Make sure SD clock is available */
821 if (bus->clkstate == CLK_NONE)
822 brcmf_sdbrcm_sdclk(bus, true);
823 /* Now request HT Avail on the backplane */
824 brcmf_sdbrcm_htclk(bus, true, pendok);
825 brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
826 bus->activity = true;
830 /* Remove HT request, or bring up SD clock */
831 if (bus->clkstate == CLK_NONE)
832 brcmf_sdbrcm_sdclk(bus, true);
833 else if (bus->clkstate == CLK_AVAIL)
834 brcmf_sdbrcm_htclk(bus, false, false);
836 brcmf_dbg(ERROR, "request for %d -> %d\n",
837 bus->clkstate, target);
838 brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
842 /* Make sure to remove HT request */
843 if (bus->clkstate == CLK_AVAIL)
844 brcmf_sdbrcm_htclk(bus, false, false);
845 /* Now remove the SD clock */
846 brcmf_sdbrcm_sdclk(bus, false);
847 brcmf_sdbrcm_wd_timer(bus, 0);
851 brcmf_dbg(INFO, "%d -> %d\n", oldstate, bus->clkstate);
857 static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep)
861 brcmf_dbg(INFO, "request %s (currently %s)\n",
862 sleep ? "SLEEP" : "WAKE",
863 bus->sleeping ? "SLEEP" : "WAKE");
865 /* Done if we're already in the requested state */
866 if (sleep == bus->sleeping)
869 /* Going to sleep: set the alarm and turn off the lights... */
871 /* Don't sleep if something is pending */
872 if (bus->dpc_sched || bus->rxskip || pktq_len(&bus->txq))
875 /* Make sure the controller has the bus up */
876 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
878 /* Tell device to start using OOB wakeup */
879 ret = w_sdreg32(bus, SMB_USE_OOB,
880 offsetof(struct sdpcmd_regs, tosbmailbox));
882 brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP, WILL NOT WAKE UP!!\n");
884 /* Turn off our contribution to the HT clock request */
885 brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
887 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
888 SBSDIO_FORCE_HW_CLKREQ_OFF, NULL);
890 /* Isolate the bus */
891 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
892 SBSDIO_DEVCTL_PADS_ISO, NULL);
895 bus->sleeping = true;
898 /* Waking up: bus power up is ok, set local state */
900 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
903 /* Make sure the controller has the bus up */
904 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
906 /* Send misc interrupt to indicate OOB not needed */
907 ret = w_sdreg32(bus, 0,
908 offsetof(struct sdpcmd_regs, tosbmailboxdata));
910 ret = w_sdreg32(bus, SMB_DEV_INT,
911 offsetof(struct sdpcmd_regs, tosbmailbox));
914 brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP TO CLEAR OOB!!\n");
916 /* Make sure we have SD bus access */
917 brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
920 bus->sleeping = false;
926 static void bus_wake(struct brcmf_sdio *bus)
929 brcmf_sdbrcm_bussleep(bus, false);
932 static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus)
939 brcmf_dbg(TRACE, "Enter\n");
941 /* Read mailbox data and ack that we did so */
942 ret = r_sdreg32(bus, &hmb_data,
943 offsetof(struct sdpcmd_regs, tohostmailboxdata));
946 w_sdreg32(bus, SMB_INT_ACK,
947 offsetof(struct sdpcmd_regs, tosbmailbox));
950 /* Dongle recomposed rx frames, accept them again */
951 if (hmb_data & HMB_DATA_NAKHANDLED) {
952 brcmf_dbg(INFO, "Dongle reports NAK handled, expect rtx of %d\n",
955 brcmf_dbg(ERROR, "unexpected NAKHANDLED!\n");
958 intstatus |= I_HMB_FRAME_IND;
962 * DEVREADY does not occur with gSPI.
964 if (hmb_data & (HMB_DATA_DEVREADY | HMB_DATA_FWREADY)) {
966 (hmb_data & HMB_DATA_VERSION_MASK) >>
967 HMB_DATA_VERSION_SHIFT;
968 if (bus->sdpcm_ver != SDPCM_PROT_VERSION)
969 brcmf_dbg(ERROR, "Version mismatch, dongle reports %d, "
971 bus->sdpcm_ver, SDPCM_PROT_VERSION);
973 brcmf_dbg(INFO, "Dongle ready, protocol version %d\n",
978 * Flow Control has been moved into the RX headers and this out of band
979 * method isn't used any more.
980 * remaining backward compatible with older dongles.
982 if (hmb_data & HMB_DATA_FC) {
983 fcbits = (hmb_data & HMB_DATA_FCDATA_MASK) >>
984 HMB_DATA_FCDATA_SHIFT;
986 if (fcbits & ~bus->flowcontrol)
989 if (bus->flowcontrol & ~fcbits)
993 bus->flowcontrol = fcbits;
996 /* Shouldn't be any others */
997 if (hmb_data & ~(HMB_DATA_DEVREADY |
998 HMB_DATA_NAKHANDLED |
1001 HMB_DATA_FCDATA_MASK | HMB_DATA_VERSION_MASK))
1002 brcmf_dbg(ERROR, "Unknown mailbox data content: 0x%02x\n",
1008 static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
1015 brcmf_dbg(ERROR, "%sterminate frame%s\n",
1016 abort ? "abort command, " : "",
1017 rtx ? ", send NAK" : "");
1020 brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
1022 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
1026 /* Wait until the packet has been flushed (device/FIFO stable) */
1027 for (lastrbc = retries = 0xffff; retries > 0; retries--) {
1028 hi = brcmf_sdio_regrb(bus->sdiodev,
1029 SBSDIO_FUNC1_RFRAMEBCHI, &err);
1030 lo = brcmf_sdio_regrb(bus->sdiodev,
1031 SBSDIO_FUNC1_RFRAMEBCLO, &err);
1032 bus->f1regdata += 2;
1034 if ((hi == 0) && (lo == 0))
1037 if ((hi > (lastrbc >> 8)) && (lo > (lastrbc & 0x00ff))) {
1038 brcmf_dbg(ERROR, "count growing: last 0x%04x now 0x%04x\n",
1039 lastrbc, (hi << 8) + lo);
1041 lastrbc = (hi << 8) + lo;
1045 brcmf_dbg(ERROR, "count never zeroed: last 0x%04x\n", lastrbc);
1047 brcmf_dbg(INFO, "flush took %d iterations\n", 0xffff - retries);
1051 err = w_sdreg32(bus, SMB_NAK,
1052 offsetof(struct sdpcmd_regs, tosbmailbox));
1059 /* Clear partial in any case */
1062 /* If we can't reach the device, signal failure */
1064 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
1067 /* copy a buffer into a pkt buffer chain */
1068 static uint brcmf_sdbrcm_glom_from_buf(struct brcmf_sdio *bus, uint len)
1077 skb_queue_walk(&bus->glom, p) {
1078 n = min_t(uint, p->len, len);
1079 memcpy(p->data, buf, n);
1090 /* return total length of buffer chain */
1091 static uint brcmf_sdbrcm_glom_len(struct brcmf_sdio *bus)
1097 skb_queue_walk(&bus->glom, p)
1102 static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus)
1104 struct sk_buff *cur, *next;
1106 skb_queue_walk_safe(&bus->glom, cur, next) {
1107 skb_unlink(cur, &bus->glom);
1108 brcmu_pkt_buf_free_skb(cur);
1112 static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
1118 struct sk_buff *pfirst, *pnext;
1121 u8 chan, seq, doff, sfdoff;
1125 bool usechain = bus->use_rxchain;
1127 /* If packets, issue read(s) and send up packet chain */
1128 /* Return sequence numbers consumed? */
1130 brcmf_dbg(TRACE, "start: glomd %p glom %p\n",
1131 bus->glomd, skb_peek(&bus->glom));
1133 /* If there's a descriptor, generate the packet chain */
1135 pfirst = pnext = NULL;
1136 dlen = (u16) (bus->glomd->len);
1137 dptr = bus->glomd->data;
1138 if (!dlen || (dlen & 1)) {
1139 brcmf_dbg(ERROR, "bad glomd len(%d), ignore descriptor\n",
1144 for (totlen = num = 0; dlen; num++) {
1145 /* Get (and move past) next length */
1146 sublen = get_unaligned_le16(dptr);
1147 dlen -= sizeof(u16);
1148 dptr += sizeof(u16);
1149 if ((sublen < SDPCM_HDRLEN) ||
1150 ((num == 0) && (sublen < (2 * SDPCM_HDRLEN)))) {
1151 brcmf_dbg(ERROR, "descriptor len %d bad: %d\n",
1156 if (sublen % BRCMF_SDALIGN) {
1157 brcmf_dbg(ERROR, "sublen %d not multiple of %d\n",
1158 sublen, BRCMF_SDALIGN);
1163 /* For last frame, adjust read len so total
1164 is a block multiple */
1167 (roundup(totlen, bus->blocksize) - totlen);
1168 totlen = roundup(totlen, bus->blocksize);
1171 /* Allocate/chain packet for next subframe */
1172 pnext = brcmu_pkt_buf_get_skb(sublen + BRCMF_SDALIGN);
1173 if (pnext == NULL) {
1174 brcmf_dbg(ERROR, "bcm_pkt_buf_get_skb failed, num %d len %d\n",
1178 skb_queue_tail(&bus->glom, pnext);
1180 /* Adhere to start alignment requirements */
1181 pkt_align(pnext, sublen, BRCMF_SDALIGN);
1184 /* If all allocations succeeded, save packet chain
1187 brcmf_dbg(GLOM, "allocated %d-byte packet chain for %d subframes\n",
1189 if (BRCMF_GLOM_ON() && bus->nextlen &&
1190 totlen != bus->nextlen) {
1191 brcmf_dbg(GLOM, "glomdesc mismatch: nextlen %d glomdesc %d rxseq %d\n",
1192 bus->nextlen, totlen, rxseq);
1194 pfirst = pnext = NULL;
1196 brcmf_sdbrcm_free_glom(bus);
1200 /* Done with descriptor packet */
1201 brcmu_pkt_buf_free_skb(bus->glomd);
1206 /* Ok -- either we just generated a packet chain,
1207 or had one from before */
1208 if (!skb_queue_empty(&bus->glom)) {
1209 if (BRCMF_GLOM_ON()) {
1210 brcmf_dbg(GLOM, "try superframe read, packet chain:\n");
1211 skb_queue_walk(&bus->glom, pnext) {
1212 brcmf_dbg(GLOM, " %p: %p len 0x%04x (%d)\n",
1213 pnext, (u8 *) (pnext->data),
1214 pnext->len, pnext->len);
1218 pfirst = skb_peek(&bus->glom);
1219 dlen = (u16) brcmf_sdbrcm_glom_len(bus);
1221 /* Do an SDIO read for the superframe. Configurable iovar to
1222 * read directly into the chained packet, or allocate a large
1223 * packet and and copy into the chain.
1226 errcode = brcmf_sdcard_recv_chain(bus->sdiodev,
1227 bus->sdiodev->sbwad,
1228 SDIO_FUNC_2, F2SYNC, &bus->glom);
1229 } else if (bus->dataptr) {
1230 errcode = brcmf_sdcard_recv_buf(bus->sdiodev,
1231 bus->sdiodev->sbwad,
1232 SDIO_FUNC_2, F2SYNC,
1233 bus->dataptr, dlen);
1234 sublen = (u16) brcmf_sdbrcm_glom_from_buf(bus, dlen);
1235 if (sublen != dlen) {
1236 brcmf_dbg(ERROR, "FAILED TO COPY, dlen %d sublen %d\n",
1242 brcmf_dbg(ERROR, "COULDN'T ALLOC %d-BYTE GLOM, FORCE FAILURE\n",
1248 /* On failure, kill the superframe, allow a couple retries */
1250 brcmf_dbg(ERROR, "glom read of %d bytes failed: %d\n",
1252 bus->sdiodev->bus_if->dstats.rx_errors++;
1254 if (bus->glomerr++ < 3) {
1255 brcmf_sdbrcm_rxfail(bus, true, true);
1258 brcmf_sdbrcm_rxfail(bus, true, false);
1260 brcmf_sdbrcm_free_glom(bus);
1265 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1266 pfirst->data, min_t(int, pfirst->len, 48),
1269 /* Validate the superframe header */
1270 dptr = (u8 *) (pfirst->data);
1271 sublen = get_unaligned_le16(dptr);
1272 check = get_unaligned_le16(dptr + sizeof(u16));
1274 chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
1275 seq = SDPCM_PACKET_SEQUENCE(&dptr[SDPCM_FRAMETAG_LEN]);
1276 bus->nextlen = dptr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
1277 if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
1278 brcmf_dbg(INFO, "nextlen too large (%d) seq %d\n",
1282 doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
1283 txmax = SDPCM_WINDOW_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
1286 if ((u16)~(sublen ^ check)) {
1287 brcmf_dbg(ERROR, "(superframe): HW hdr error: len/check 0x%04x/0x%04x\n",
1290 } else if (roundup(sublen, bus->blocksize) != dlen) {
1291 brcmf_dbg(ERROR, "(superframe): len 0x%04x, rounded 0x%04x, expect 0x%04x\n",
1292 sublen, roundup(sublen, bus->blocksize),
1295 } else if (SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]) !=
1296 SDPCM_GLOM_CHANNEL) {
1297 brcmf_dbg(ERROR, "(superframe): bad channel %d\n",
1298 SDPCM_PACKET_CHANNEL(
1299 &dptr[SDPCM_FRAMETAG_LEN]));
1301 } else if (SDPCM_GLOMDESC(&dptr[SDPCM_FRAMETAG_LEN])) {
1302 brcmf_dbg(ERROR, "(superframe): got 2nd descriptor?\n");
1304 } else if ((doff < SDPCM_HDRLEN) ||
1305 (doff > (pfirst->len - SDPCM_HDRLEN))) {
1306 brcmf_dbg(ERROR, "(superframe): Bad data offset %d: HW %d pkt %d min %d\n",
1307 doff, sublen, pfirst->len, SDPCM_HDRLEN);
1311 /* Check sequence number of superframe SW header */
1313 brcmf_dbg(INFO, "(superframe) rx_seq %d, expected %d\n",
1319 /* Check window for sanity */
1320 if ((u8) (txmax - bus->tx_seq) > 0x40) {
1321 brcmf_dbg(ERROR, "unlikely tx max %d with tx_seq %d\n",
1322 txmax, bus->tx_seq);
1323 txmax = bus->tx_seq + 2;
1325 bus->tx_max = txmax;
1327 /* Remove superframe header, remember offset */
1328 skb_pull(pfirst, doff);
1332 /* Validate all the subframe headers */
1333 skb_queue_walk(&bus->glom, pnext) {
1334 /* leave when invalid subframe is found */
1338 dptr = (u8 *) (pnext->data);
1339 dlen = (u16) (pnext->len);
1340 sublen = get_unaligned_le16(dptr);
1341 check = get_unaligned_le16(dptr + sizeof(u16));
1342 chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
1343 doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
1344 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1345 dptr, 32, "subframe:\n");
1347 if ((u16)~(sublen ^ check)) {
1348 brcmf_dbg(ERROR, "(subframe %d): HW hdr error: len/check 0x%04x/0x%04x\n",
1349 num, sublen, check);
1351 } else if ((sublen > dlen) || (sublen < SDPCM_HDRLEN)) {
1352 brcmf_dbg(ERROR, "(subframe %d): length mismatch: len 0x%04x, expect 0x%04x\n",
1355 } else if ((chan != SDPCM_DATA_CHANNEL) &&
1356 (chan != SDPCM_EVENT_CHANNEL)) {
1357 brcmf_dbg(ERROR, "(subframe %d): bad channel %d\n",
1360 } else if ((doff < SDPCM_HDRLEN) || (doff > sublen)) {
1361 brcmf_dbg(ERROR, "(subframe %d): Bad data offset %d: HW %d min %d\n",
1362 num, doff, sublen, SDPCM_HDRLEN);
1365 /* increase the subframe count */
1370 /* Terminate frame on error, request
1372 if (bus->glomerr++ < 3) {
1373 /* Restore superframe header space */
1374 skb_push(pfirst, sfdoff);
1375 brcmf_sdbrcm_rxfail(bus, true, true);
1378 brcmf_sdbrcm_rxfail(bus, true, false);
1380 brcmf_sdbrcm_free_glom(bus);
1386 /* Basic SD framing looks ok - process each packet (header) */
1388 skb_queue_walk_safe(&bus->glom, pfirst, pnext) {
1389 dptr = (u8 *) (pfirst->data);
1390 sublen = get_unaligned_le16(dptr);
1391 chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
1392 seq = SDPCM_PACKET_SEQUENCE(&dptr[SDPCM_FRAMETAG_LEN]);
1393 doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
1395 brcmf_dbg(GLOM, "Get subframe %d, %p(%p/%d), sublen %d chan %d seq %d\n",
1396 num, pfirst, pfirst->data,
1397 pfirst->len, sublen, chan, seq);
1399 /* precondition: chan == SDPCM_DATA_CHANNEL ||
1400 chan == SDPCM_EVENT_CHANNEL */
1403 brcmf_dbg(GLOM, "rx_seq %d, expected %d\n",
1410 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
1411 dptr, dlen, "Rx Subframe Data:\n");
1413 __skb_trim(pfirst, sublen);
1414 skb_pull(pfirst, doff);
1416 if (pfirst->len == 0) {
1417 skb_unlink(pfirst, &bus->glom);
1418 brcmu_pkt_buf_free_skb(pfirst);
1420 } else if (brcmf_proto_hdrpull(bus->sdiodev->dev,
1421 &ifidx, pfirst) != 0) {
1422 brcmf_dbg(ERROR, "rx protocol error\n");
1423 bus->sdiodev->bus_if->dstats.rx_errors++;
1424 skb_unlink(pfirst, &bus->glom);
1425 brcmu_pkt_buf_free_skb(pfirst);
1429 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1431 min_t(int, pfirst->len, 32),
1432 "subframe %d to stack, %p (%p/%d) nxt/lnk %p/%p\n",
1433 bus->glom.qlen, pfirst, pfirst->data,
1434 pfirst->len, pfirst->next,
1437 /* sent any remaining packets up */
1438 if (bus->glom.qlen) {
1440 brcmf_rx_frame(bus->sdiodev->dev, ifidx, &bus->glom);
1444 bus->rxglomframes++;
1445 bus->rxglompkts += bus->glom.qlen;
1450 static int brcmf_sdbrcm_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition,
1453 DECLARE_WAITQUEUE(wait, current);
1454 int timeout = msecs_to_jiffies(DCMD_RESP_TIMEOUT);
1456 /* Wait until control frame is available */
1457 add_wait_queue(&bus->dcmd_resp_wait, &wait);
1458 set_current_state(TASK_INTERRUPTIBLE);
1460 while (!(*condition) && (!signal_pending(current) && timeout))
1461 timeout = schedule_timeout(timeout);
1463 if (signal_pending(current))
1466 set_current_state(TASK_RUNNING);
1467 remove_wait_queue(&bus->dcmd_resp_wait, &wait);
1472 static int brcmf_sdbrcm_dcmd_resp_wake(struct brcmf_sdio *bus)
1474 if (waitqueue_active(&bus->dcmd_resp_wait))
1475 wake_up_interruptible(&bus->dcmd_resp_wait);
1480 brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
1486 brcmf_dbg(TRACE, "Enter\n");
1488 /* Set rxctl for frame (w/optional alignment) */
1489 bus->rxctl = bus->rxbuf;
1490 bus->rxctl += BRCMF_FIRSTREAD;
1491 pad = ((unsigned long)bus->rxctl % BRCMF_SDALIGN);
1493 bus->rxctl += (BRCMF_SDALIGN - pad);
1494 bus->rxctl -= BRCMF_FIRSTREAD;
1496 /* Copy the already-read portion over */
1497 memcpy(bus->rxctl, hdr, BRCMF_FIRSTREAD);
1498 if (len <= BRCMF_FIRSTREAD)
1501 /* Raise rdlen to next SDIO block to avoid tail command */
1502 rdlen = len - BRCMF_FIRSTREAD;
1503 if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) {
1504 pad = bus->blocksize - (rdlen % bus->blocksize);
1505 if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
1506 ((len + pad) < bus->sdiodev->bus_if->maxctl))
1508 } else if (rdlen % BRCMF_SDALIGN) {
1509 rdlen += BRCMF_SDALIGN - (rdlen % BRCMF_SDALIGN);
1512 /* Satisfy length-alignment requirements */
1513 if (rdlen & (ALIGNMENT - 1))
1514 rdlen = roundup(rdlen, ALIGNMENT);
1516 /* Drop if the read is too big or it exceeds our maximum */
1517 if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) {
1518 brcmf_dbg(ERROR, "%d-byte control read exceeds %d-byte buffer\n",
1519 rdlen, bus->sdiodev->bus_if->maxctl);
1520 bus->sdiodev->bus_if->dstats.rx_errors++;
1521 brcmf_sdbrcm_rxfail(bus, false, false);
1525 if ((len - doff) > bus->sdiodev->bus_if->maxctl) {
1526 brcmf_dbg(ERROR, "%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
1527 len, len - doff, bus->sdiodev->bus_if->maxctl);
1528 bus->sdiodev->bus_if->dstats.rx_errors++;
1530 brcmf_sdbrcm_rxfail(bus, false, false);
1534 /* Read remainder of frame body into the rxctl buffer */
1535 sdret = brcmf_sdcard_recv_buf(bus->sdiodev,
1536 bus->sdiodev->sbwad,
1538 F2SYNC, (bus->rxctl + BRCMF_FIRSTREAD), rdlen);
1541 /* Control frame failures need retransmission */
1543 brcmf_dbg(ERROR, "read %d control bytes failed: %d\n",
1546 brcmf_sdbrcm_rxfail(bus, true, true);
1552 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
1553 bus->rxctl, len, "RxCtrl:\n");
1555 /* Point to valid data and indicate its length */
1557 bus->rxlen = len - doff;
1560 /* Awake any waiters */
1561 brcmf_sdbrcm_dcmd_resp_wake(bus);
1564 /* Pad read to blocksize for efficiency */
1565 static void brcmf_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen)
1567 if (bus->roundup && bus->blocksize && *rdlen > bus->blocksize) {
1568 *pad = bus->blocksize - (*rdlen % bus->blocksize);
1569 if (*pad <= bus->roundup && *pad < bus->blocksize &&
1570 *rdlen + *pad + BRCMF_FIRSTREAD < MAX_RX_DATASZ)
1572 } else if (*rdlen % BRCMF_SDALIGN) {
1573 *rdlen += BRCMF_SDALIGN - (*rdlen % BRCMF_SDALIGN);
1578 brcmf_alloc_pkt_and_read(struct brcmf_sdio *bus, u16 rdlen,
1579 struct sk_buff **pkt, u8 **rxbuf)
1581 int sdret; /* Return code from calls */
1583 *pkt = brcmu_pkt_buf_get_skb(rdlen + BRCMF_SDALIGN);
1587 pkt_align(*pkt, rdlen, BRCMF_SDALIGN);
1588 *rxbuf = (u8 *) ((*pkt)->data);
1589 /* Read the entire frame */
1590 sdret = brcmf_sdcard_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
1591 SDIO_FUNC_2, F2SYNC, *pkt);
1595 brcmf_dbg(ERROR, "(nextlen): read %d bytes failed: %d\n",
1597 brcmu_pkt_buf_free_skb(*pkt);
1598 bus->sdiodev->bus_if->dstats.rx_errors++;
1599 /* Force retry w/normal header read.
1600 * Don't attempt NAK for
1603 brcmf_sdbrcm_rxfail(bus, true, true);
1608 /* Checks the header */
1610 brcmf_check_rxbuf(struct brcmf_sdio *bus, struct sk_buff *pkt, u8 *rxbuf,
1611 u8 rxseq, u16 nextlen, u16 *len)
1614 bool len_consistent; /* Result of comparing readahead len and
1617 memcpy(bus->rxhdr, rxbuf, SDPCM_HDRLEN);
1619 /* Extract hardware header fields */
1620 *len = get_unaligned_le16(bus->rxhdr);
1621 check = get_unaligned_le16(bus->rxhdr + sizeof(u16));
1623 /* All zeros means readahead info was bad */
1624 if (!(*len | check)) {
1625 brcmf_dbg(INFO, "(nextlen): read zeros in HW header???\n");
1629 /* Validate check bytes */
1630 if ((u16)~(*len ^ check)) {
1631 brcmf_dbg(ERROR, "(nextlen): HW hdr error: nextlen/len/check 0x%04x/0x%04x/0x%04x\n",
1632 nextlen, *len, check);
1634 brcmf_sdbrcm_rxfail(bus, false, false);
1638 /* Validate frame length */
1639 if (*len < SDPCM_HDRLEN) {
1640 brcmf_dbg(ERROR, "(nextlen): HW hdr length invalid: %d\n",
1645 /* Check for consistency with readahead info */
1646 len_consistent = (nextlen != (roundup(*len, 16) >> 4));
1647 if (len_consistent) {
1648 /* Mismatch, force retry w/normal
1649 header (may be >4K) */
1650 brcmf_dbg(ERROR, "(nextlen): mismatch, nextlen %d len %d rnd %d; expected rxseq %d\n",
1651 nextlen, *len, roundup(*len, 16),
1653 brcmf_sdbrcm_rxfail(bus, true, true);
1660 brcmf_sdbrcm_pktfree2(bus, pkt);
1664 /* Return true if there may be more frames to read */
1666 brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
1668 u16 len, check; /* Extracted hardware header fields */
1669 u8 chan, seq, doff; /* Extracted software header fields */
1670 u8 fcbits; /* Extracted fcbits from software header */
1672 struct sk_buff *pkt; /* Packet for event or data frames */
1673 u16 pad; /* Number of pad bytes to read */
1674 u16 rdlen; /* Total number of bytes to read */
1675 u8 rxseq; /* Next sequence number to expect */
1676 uint rxleft = 0; /* Remaining number of frames allowed */
1677 int sdret; /* Return code from calls */
1678 u8 txmax; /* Maximum tx sequence offered */
1681 uint rxcount = 0; /* Total frames read */
1683 brcmf_dbg(TRACE, "Enter\n");
1685 /* Not finished unless we encounter no more frames indication */
1688 for (rxseq = bus->rx_seq, rxleft = maxframes;
1689 !bus->rxskip && rxleft &&
1690 bus->sdiodev->bus_if->state != BRCMF_BUS_DOWN;
1691 rxseq++, rxleft--) {
1693 /* Handle glomming separately */
1694 if (bus->glomd || !skb_queue_empty(&bus->glom)) {
1696 brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n",
1697 bus->glomd, skb_peek(&bus->glom));
1698 cnt = brcmf_sdbrcm_rxglom(bus, rxseq);
1699 brcmf_dbg(GLOM, "rxglom returned %d\n", cnt);
1701 rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1;
1705 /* Try doing single read if we can */
1707 u16 nextlen = bus->nextlen;
1710 rdlen = len = nextlen << 4;
1711 brcmf_pad(bus, &pad, &rdlen);
1714 * After the frame is received we have to
1715 * distinguish whether it is data
1716 * or non-data frame.
1718 brcmf_alloc_pkt_and_read(bus, rdlen, &pkt, &rxbuf);
1720 /* Give up on data, request rtx of events */
1721 brcmf_dbg(ERROR, "(nextlen): brcmf_alloc_pkt_and_read failed: len %d rdlen %d expected rxseq %d\n",
1726 if (brcmf_check_rxbuf(bus, pkt, rxbuf, rxseq, nextlen,
1730 /* Extract software header fields */
1731 chan = SDPCM_PACKET_CHANNEL(
1732 &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1733 seq = SDPCM_PACKET_SEQUENCE(
1734 &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1735 doff = SDPCM_DOFFSET_VALUE(
1736 &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1737 txmax = SDPCM_WINDOW_VALUE(
1738 &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1741 bus->rxhdr[SDPCM_FRAMETAG_LEN +
1742 SDPCM_NEXTLEN_OFFSET];
1743 if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
1744 brcmf_dbg(INFO, "(nextlen): got frame w/nextlen too large (%d), seq %d\n",
1749 bus->rx_readahead_cnt++;
1751 /* Handle Flow Control */
1752 fcbits = SDPCM_FCMASK_VALUE(
1753 &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1755 if (bus->flowcontrol != fcbits) {
1756 if (~bus->flowcontrol & fcbits)
1759 if (bus->flowcontrol & ~fcbits)
1763 bus->flowcontrol = fcbits;
1766 /* Check and update sequence number */
1768 brcmf_dbg(INFO, "(nextlen): rx_seq %d, expected %d\n",
1774 /* Check window for sanity */
1775 if ((u8) (txmax - bus->tx_seq) > 0x40) {
1776 brcmf_dbg(ERROR, "got unlikely tx max %d with tx_seq %d\n",
1777 txmax, bus->tx_seq);
1778 txmax = bus->tx_seq + 2;
1780 bus->tx_max = txmax;
1782 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
1783 rxbuf, len, "Rx Data:\n");
1784 brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() &&
1787 bus->rxhdr, SDPCM_HDRLEN,
1790 if (chan == SDPCM_CONTROL_CHANNEL) {
1791 brcmf_dbg(ERROR, "(nextlen): readahead on control packet %d?\n",
1793 /* Force retry w/normal header read */
1795 brcmf_sdbrcm_rxfail(bus, false, true);
1796 brcmf_sdbrcm_pktfree2(bus, pkt);
1800 /* Validate data offset */
1801 if ((doff < SDPCM_HDRLEN) || (doff > len)) {
1802 brcmf_dbg(ERROR, "(nextlen): bad data offset %d: HW len %d min %d\n",
1803 doff, len, SDPCM_HDRLEN);
1804 brcmf_sdbrcm_rxfail(bus, false, false);
1805 brcmf_sdbrcm_pktfree2(bus, pkt);
1809 /* All done with this one -- now deliver the packet */
1813 /* Read frame header (hardware and software) */
1814 sdret = brcmf_sdcard_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
1815 SDIO_FUNC_2, F2SYNC, bus->rxhdr,
1820 brcmf_dbg(ERROR, "RXHEADER FAILED: %d\n", sdret);
1822 brcmf_sdbrcm_rxfail(bus, true, true);
1825 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() || BRCMF_HDRS_ON(),
1826 bus->rxhdr, SDPCM_HDRLEN, "RxHdr:\n");
1829 /* Extract hardware header fields */
1830 len = get_unaligned_le16(bus->rxhdr);
1831 check = get_unaligned_le16(bus->rxhdr + sizeof(u16));
1833 /* All zeros means no more frames */
1834 if (!(len | check)) {
1839 /* Validate check bytes */
1840 if ((u16) ~(len ^ check)) {
1841 brcmf_dbg(ERROR, "HW hdr err: len/check 0x%04x/0x%04x\n",
1844 brcmf_sdbrcm_rxfail(bus, false, false);
1848 /* Validate frame length */
1849 if (len < SDPCM_HDRLEN) {
1850 brcmf_dbg(ERROR, "HW hdr length invalid: %d\n", len);
1854 /* Extract software header fields */
1855 chan = SDPCM_PACKET_CHANNEL(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1856 seq = SDPCM_PACKET_SEQUENCE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1857 doff = SDPCM_DOFFSET_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1858 txmax = SDPCM_WINDOW_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1860 /* Validate data offset */
1861 if ((doff < SDPCM_HDRLEN) || (doff > len)) {
1862 brcmf_dbg(ERROR, "Bad data offset %d: HW len %d, min %d seq %d\n",
1863 doff, len, SDPCM_HDRLEN, seq);
1865 brcmf_sdbrcm_rxfail(bus, false, false);
1869 /* Save the readahead length if there is one */
1871 bus->rxhdr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
1872 if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
1873 brcmf_dbg(INFO, "(nextlen): got frame w/nextlen too large (%d), seq %d\n",
1878 /* Handle Flow Control */
1879 fcbits = SDPCM_FCMASK_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1881 if (bus->flowcontrol != fcbits) {
1882 if (~bus->flowcontrol & fcbits)
1885 if (bus->flowcontrol & ~fcbits)
1889 bus->flowcontrol = fcbits;
1892 /* Check and update sequence number */
1894 brcmf_dbg(INFO, "rx_seq %d, expected %d\n", seq, rxseq);
1899 /* Check window for sanity */
1900 if ((u8) (txmax - bus->tx_seq) > 0x40) {
1901 brcmf_dbg(ERROR, "unlikely tx max %d with tx_seq %d\n",
1902 txmax, bus->tx_seq);
1903 txmax = bus->tx_seq + 2;
1905 bus->tx_max = txmax;
1907 /* Call a separate function for control frames */
1908 if (chan == SDPCM_CONTROL_CHANNEL) {
1909 brcmf_sdbrcm_read_control(bus, bus->rxhdr, len, doff);
1913 /* precondition: chan is either SDPCM_DATA_CHANNEL,
1914 SDPCM_EVENT_CHANNEL, SDPCM_TEST_CHANNEL or
1915 SDPCM_GLOM_CHANNEL */
1917 /* Length to read */
1918 rdlen = (len > BRCMF_FIRSTREAD) ? (len - BRCMF_FIRSTREAD) : 0;
1920 /* May pad read to blocksize for efficiency */
1921 if (bus->roundup && bus->blocksize &&
1922 (rdlen > bus->blocksize)) {
1923 pad = bus->blocksize - (rdlen % bus->blocksize);
1924 if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
1925 ((rdlen + pad + BRCMF_FIRSTREAD) < MAX_RX_DATASZ))
1927 } else if (rdlen % BRCMF_SDALIGN) {
1928 rdlen += BRCMF_SDALIGN - (rdlen % BRCMF_SDALIGN);
1931 /* Satisfy length-alignment requirements */
1932 if (rdlen & (ALIGNMENT - 1))
1933 rdlen = roundup(rdlen, ALIGNMENT);
1935 if ((rdlen + BRCMF_FIRSTREAD) > MAX_RX_DATASZ) {
1936 /* Too long -- skip this frame */
1937 brcmf_dbg(ERROR, "too long: len %d rdlen %d\n",
1939 bus->sdiodev->bus_if->dstats.rx_errors++;
1941 brcmf_sdbrcm_rxfail(bus, false, false);
1945 pkt = brcmu_pkt_buf_get_skb(rdlen +
1946 BRCMF_FIRSTREAD + BRCMF_SDALIGN);
1948 /* Give up on data, request rtx of events */
1949 brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: rdlen %d chan %d\n",
1951 bus->sdiodev->bus_if->dstats.rx_dropped++;
1952 brcmf_sdbrcm_rxfail(bus, false, RETRYCHAN(chan));
1956 /* Leave room for what we already read, and align remainder */
1957 skb_pull(pkt, BRCMF_FIRSTREAD);
1958 pkt_align(pkt, rdlen, BRCMF_SDALIGN);
1960 /* Read the remaining frame data */
1961 sdret = brcmf_sdcard_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
1962 SDIO_FUNC_2, F2SYNC, pkt);
1966 brcmf_dbg(ERROR, "read %d %s bytes failed: %d\n", rdlen,
1967 ((chan == SDPCM_EVENT_CHANNEL) ? "event"
1968 : ((chan == SDPCM_DATA_CHANNEL) ? "data"
1970 brcmu_pkt_buf_free_skb(pkt);
1971 bus->sdiodev->bus_if->dstats.rx_errors++;
1972 brcmf_sdbrcm_rxfail(bus, true, RETRYCHAN(chan));
1976 /* Copy the already-read portion */
1977 skb_push(pkt, BRCMF_FIRSTREAD);
1978 memcpy(pkt->data, bus->rxhdr, BRCMF_FIRSTREAD);
1980 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
1981 pkt->data, len, "Rx Data:\n");
1984 /* Save superframe descriptor and allocate packet frame */
1985 if (chan == SDPCM_GLOM_CHANNEL) {
1986 if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_FRAMETAG_LEN])) {
1987 brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n",
1989 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1992 __skb_trim(pkt, len);
1993 skb_pull(pkt, SDPCM_HDRLEN);
1996 brcmf_dbg(ERROR, "%s: glom superframe w/o "
1997 "descriptor!\n", __func__);
1998 brcmf_sdbrcm_rxfail(bus, false, false);
2003 /* Fill in packet len and prio, deliver upward */
2004 __skb_trim(pkt, len);
2005 skb_pull(pkt, doff);
2007 if (pkt->len == 0) {
2008 brcmu_pkt_buf_free_skb(pkt);
2010 } else if (brcmf_proto_hdrpull(bus->sdiodev->dev, &ifidx,
2012 brcmf_dbg(ERROR, "rx protocol error\n");
2013 brcmu_pkt_buf_free_skb(pkt);
2014 bus->sdiodev->bus_if->dstats.rx_errors++;
2018 /* Unlock during rx call */
2020 brcmf_rx_packet(bus->sdiodev->dev, ifidx, pkt);
2023 rxcount = maxframes - rxleft;
2024 /* Message if we hit the limit */
2026 brcmf_dbg(DATA, "hit rx limit of %d frames\n",
2029 brcmf_dbg(DATA, "processed %d frames\n", rxcount);
2030 /* Back off rxseq if awaiting rtx, update rx_seq */
2033 bus->rx_seq = rxseq;
2039 brcmf_sdbrcm_wait_for_event(struct brcmf_sdio *bus, bool *lockvar)
2042 wait_event_interruptible_timeout(bus->ctrl_wait, !*lockvar, HZ * 2);
2048 brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus)
2050 if (waitqueue_active(&bus->ctrl_wait))
2051 wake_up_interruptible(&bus->ctrl_wait);
2055 /* Writes a HW/SW header into the packet and sends it. */
2056 /* Assumes: (a) header space already there, (b) caller holds lock */
2057 static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,
2058 uint chan, bool free_pkt)
2064 struct sk_buff *new;
2067 brcmf_dbg(TRACE, "Enter\n");
2069 frame = (u8 *) (pkt->data);
2071 /* Add alignment padding, allocate new packet if needed */
2072 pad = ((unsigned long)frame % BRCMF_SDALIGN);
2074 if (skb_headroom(pkt) < pad) {
2075 brcmf_dbg(INFO, "insufficient headroom %d for %d pad\n",
2076 skb_headroom(pkt), pad);
2077 bus->sdiodev->bus_if->tx_realloc++;
2078 new = brcmu_pkt_buf_get_skb(pkt->len + BRCMF_SDALIGN);
2080 brcmf_dbg(ERROR, "couldn't allocate new %d-byte packet\n",
2081 pkt->len + BRCMF_SDALIGN);
2086 pkt_align(new, pkt->len, BRCMF_SDALIGN);
2087 memcpy(new->data, pkt->data, pkt->len);
2089 brcmu_pkt_buf_free_skb(pkt);
2090 /* free the pkt if canned one is not used */
2093 frame = (u8 *) (pkt->data);
2094 /* precondition: (frame % BRCMF_SDALIGN) == 0) */
2098 frame = (u8 *) (pkt->data);
2099 /* precondition: pad + SDPCM_HDRLEN <= pkt->len */
2100 memset(frame, 0, pad + SDPCM_HDRLEN);
2103 /* precondition: pad < BRCMF_SDALIGN */
2105 /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */
2106 len = (u16) (pkt->len);
2107 *(__le16 *) frame = cpu_to_le16(len);
2108 *(((__le16 *) frame) + 1) = cpu_to_le16(~len);
2110 /* Software tag: channel, sequence number, data offset */
2112 ((chan << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK) | bus->tx_seq |
2114 SDPCM_HDRLEN) << SDPCM_DOFFSET_SHIFT) & SDPCM_DOFFSET_MASK);
2116 put_unaligned_le32(swheader, frame + SDPCM_FRAMETAG_LEN);
2117 put_unaligned_le32(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader));
2120 tx_packets[pkt->priority]++;
2123 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() &&
2124 ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) ||
2125 (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL)),
2126 frame, len, "Tx Frame:\n");
2127 brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() &&
2129 chan == SDPCM_CONTROL_CHANNEL) ||
2131 chan != SDPCM_CONTROL_CHANNEL))) &&
2133 frame, min_t(u16, len, 16), "TxHdr:\n");
2135 /* Raise len to next SDIO block to eliminate tail command */
2136 if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
2137 u16 pad = bus->blocksize - (len % bus->blocksize);
2138 if ((pad <= bus->roundup) && (pad < bus->blocksize))
2140 } else if (len % BRCMF_SDALIGN) {
2141 len += BRCMF_SDALIGN - (len % BRCMF_SDALIGN);
2144 /* Some controllers have trouble with odd bytes -- round to even */
2145 if (len & (ALIGNMENT - 1))
2146 len = roundup(len, ALIGNMENT);
2148 ret = brcmf_sdcard_send_pkt(bus->sdiodev, bus->sdiodev->sbwad,
2149 SDIO_FUNC_2, F2SYNC, pkt);
2153 /* On failure, abort the command and terminate the frame */
2154 brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
2158 brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
2159 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
2163 for (i = 0; i < 3; i++) {
2165 hi = brcmf_sdio_regrb(bus->sdiodev,
2166 SBSDIO_FUNC1_WFRAMEBCHI, NULL);
2167 lo = brcmf_sdio_regrb(bus->sdiodev,
2168 SBSDIO_FUNC1_WFRAMEBCLO, NULL);
2169 bus->f1regdata += 2;
2170 if ((hi == 0) && (lo == 0))
2176 bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
2179 /* restore pkt buffer pointer before calling tx complete routine */
2180 skb_pull(pkt, SDPCM_HDRLEN + pad);
2182 brcmf_txcomplete(bus->sdiodev->dev, pkt, ret != 0);
2186 brcmu_pkt_buf_free_skb(pkt);
2191 static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes)
2193 struct sk_buff *pkt;
2195 int ret = 0, prec_out;
2200 brcmf_dbg(TRACE, "Enter\n");
2202 tx_prec_map = ~bus->flowcontrol;
2204 /* Send frames until the limit or some other event */
2205 for (cnt = 0; (cnt < maxframes) && data_ok(bus); cnt++) {
2206 spin_lock_bh(&bus->txqlock);
2207 pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, &prec_out);
2209 spin_unlock_bh(&bus->txqlock);
2212 spin_unlock_bh(&bus->txqlock);
2213 datalen = pkt->len - SDPCM_HDRLEN;
2215 ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL, true);
2217 bus->sdiodev->bus_if->dstats.tx_errors++;
2219 bus->sdiodev->bus_if->dstats.tx_bytes += datalen;
2221 /* In poll mode, need to check for other events */
2222 if (!bus->intr && cnt) {
2223 /* Check device status, signal pending interrupt */
2224 ret = r_sdreg32(bus, &intstatus,
2225 offsetof(struct sdpcmd_regs,
2230 if (intstatus & bus->hostintmask)
2235 /* Deflow-control stack if needed */
2236 if (bus->sdiodev->bus_if->drvr_up &&
2237 (bus->sdiodev->bus_if->state == BRCMF_BUS_DATA) &&
2238 bus->txoff && (pktq_len(&bus->txq) < TXLOW)) {
2240 brcmf_txflowcontrol(bus->sdiodev->dev, 0, OFF);
2246 static void brcmf_sdbrcm_bus_stop(struct device *dev)
2248 u32 local_hostintmask;
2251 struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2252 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2253 struct brcmf_sdio *bus = sdiodev->bus;
2255 brcmf_dbg(TRACE, "Enter\n");
2257 if (bus->watchdog_tsk) {
2258 send_sig(SIGTERM, bus->watchdog_tsk, 1);
2259 kthread_stop(bus->watchdog_tsk);
2260 bus->watchdog_tsk = NULL;
2263 if (bus->dpc_tsk && bus->dpc_tsk != current) {
2264 send_sig(SIGTERM, bus->dpc_tsk, 1);
2265 kthread_stop(bus->dpc_tsk);
2266 bus->dpc_tsk = NULL;
2273 /* Enable clock for device interrupts */
2274 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
2276 /* Disable and clear interrupts at the chip level also */
2277 w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask));
2278 local_hostintmask = bus->hostintmask;
2279 bus->hostintmask = 0;
2281 /* Change our idea of bus state */
2282 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
2284 /* Force clocks on backplane to be sure F2 interrupt propagates */
2285 saveclk = brcmf_sdio_regrb(bus->sdiodev,
2286 SBSDIO_FUNC1_CHIPCLKCSR, &err);
2288 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
2289 (saveclk | SBSDIO_FORCE_HT), &err);
2292 brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
2294 /* Turn off the bus (F2), free any pending packets */
2295 brcmf_dbg(INTR, "disable SDIO interrupts\n");
2296 brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1,
2299 /* Clear any pending interrupts now that F2 is disabled */
2300 w_sdreg32(bus, local_hostintmask,
2301 offsetof(struct sdpcmd_regs, intstatus));
2303 /* Turn off the backplane clock (only) */
2304 brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
2306 /* Clear the data packet queues */
2307 brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
2309 /* Clear any held glomming stuff */
2311 brcmu_pkt_buf_free_skb(bus->glomd);
2312 brcmf_sdbrcm_free_glom(bus);
2314 /* Clear rx control and wake any waiters */
2316 brcmf_sdbrcm_dcmd_resp_wake(bus);
2318 /* Reset some F2 state stuff */
2319 bus->rxskip = false;
2320 bus->tx_seq = bus->rx_seq = 0;
2325 #ifdef CONFIG_BRCMFMAC_SDIO_OOB
2326 static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
2328 unsigned long flags;
2330 spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags);
2331 if (!bus->sdiodev->irq_en && !bus->ipend) {
2332 enable_irq(bus->sdiodev->irq);
2333 bus->sdiodev->irq_en = true;
2335 spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags);
2338 static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
2341 #endif /* CONFIG_BRCMFMAC_SDIO_OOB */
2343 static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
2345 u32 intstatus, newstatus = 0;
2346 uint rxlimit = bus->rxbound; /* Rx frames to read before resched */
2347 uint txlimit = bus->txbound; /* Tx frames to send before resched */
2348 uint framecnt = 0; /* Temporary counter of tx/rx frames */
2349 bool rxdone = true; /* Flag for no more read data */
2350 bool resched = false; /* Flag indicating resched wanted */
2353 brcmf_dbg(TRACE, "Enter\n");
2355 /* Start with leftover status bits */
2356 intstatus = bus->intstatus;
2360 /* If waiting for HTAVAIL, check status */
2361 if (bus->clkstate == CLK_PENDING) {
2362 u8 clkctl, devctl = 0;
2365 /* Check for inconsistent device control */
2366 devctl = brcmf_sdio_regrb(bus->sdiodev,
2367 SBSDIO_DEVICE_CTL, &err);
2369 brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err);
2370 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
2374 /* Read CSR, if clock on switch to AVAIL, else ignore */
2375 clkctl = brcmf_sdio_regrb(bus->sdiodev,
2376 SBSDIO_FUNC1_CHIPCLKCSR, &err);
2378 brcmf_dbg(ERROR, "error reading CSR: %d\n",
2380 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
2383 brcmf_dbg(INFO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",
2386 if (SBSDIO_HTAV(clkctl)) {
2387 devctl = brcmf_sdio_regrb(bus->sdiodev,
2388 SBSDIO_DEVICE_CTL, &err);
2390 brcmf_dbg(ERROR, "error reading DEVCTL: %d\n",
2392 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
2394 devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
2395 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
2398 brcmf_dbg(ERROR, "error writing DEVCTL: %d\n",
2400 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
2402 bus->clkstate = CLK_AVAIL;
2410 /* Make sure backplane clock is on */
2411 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, true);
2412 if (bus->clkstate == CLK_PENDING)
2415 /* Pending interrupt indicates new device status */
2418 err = r_sdreg32(bus, &newstatus,
2419 offsetof(struct sdpcmd_regs, intstatus));
2423 newstatus &= bus->hostintmask;
2424 bus->fcstate = !!(newstatus & I_HMB_FC_STATE);
2426 err = w_sdreg32(bus, newstatus,
2427 offsetof(struct sdpcmd_regs,
2433 /* Merge new bits with previous */
2434 intstatus |= newstatus;
2437 /* Handle flow-control change: read new state in case our ack
2438 * crossed another change interrupt. If change still set, assume
2439 * FC ON for safety, let next loop through do the debounce.
2441 if (intstatus & I_HMB_FC_CHANGE) {
2442 intstatus &= ~I_HMB_FC_CHANGE;
2443 err = w_sdreg32(bus, I_HMB_FC_CHANGE,
2444 offsetof(struct sdpcmd_regs, intstatus));
2446 err = r_sdreg32(bus, &newstatus,
2447 offsetof(struct sdpcmd_regs, intstatus));
2448 bus->f1regdata += 2;
2450 !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE));
2451 intstatus |= (newstatus & bus->hostintmask);
2454 /* Handle host mailbox indication */
2455 if (intstatus & I_HMB_HOST_INT) {
2456 intstatus &= ~I_HMB_HOST_INT;
2457 intstatus |= brcmf_sdbrcm_hostmail(bus);
2460 /* Generally don't ask for these, can get CRC errors... */
2461 if (intstatus & I_WR_OOSYNC) {
2462 brcmf_dbg(ERROR, "Dongle reports WR_OOSYNC\n");
2463 intstatus &= ~I_WR_OOSYNC;
2466 if (intstatus & I_RD_OOSYNC) {
2467 brcmf_dbg(ERROR, "Dongle reports RD_OOSYNC\n");
2468 intstatus &= ~I_RD_OOSYNC;
2471 if (intstatus & I_SBINT) {
2472 brcmf_dbg(ERROR, "Dongle reports SBINT\n");
2473 intstatus &= ~I_SBINT;
2476 /* Would be active due to wake-wlan in gSPI */
2477 if (intstatus & I_CHIPACTIVE) {
2478 brcmf_dbg(INFO, "Dongle reports CHIPACTIVE\n");
2479 intstatus &= ~I_CHIPACTIVE;
2482 /* Ignore frame indications if rxskip is set */
2484 intstatus &= ~I_HMB_FRAME_IND;
2486 /* On frame indication, read available frames */
2487 if (PKT_AVAILABLE()) {
2488 framecnt = brcmf_sdbrcm_readframes(bus, rxlimit, &rxdone);
2489 if (rxdone || bus->rxskip)
2490 intstatus &= ~I_HMB_FRAME_IND;
2491 rxlimit -= min(framecnt, rxlimit);
2494 /* Keep still-pending events for next scheduling */
2495 bus->intstatus = intstatus;
2498 brcmf_sdbrcm_clrintr(bus);
2500 if (data_ok(bus) && bus->ctrl_frame_stat &&
2501 (bus->clkstate == CLK_AVAIL)) {
2504 ret = brcmf_sdcard_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
2505 SDIO_FUNC_2, F2SYNC, (u8 *) bus->ctrl_frame_buf,
2506 (u32) bus->ctrl_frame_len);
2509 /* On failure, abort the command and
2510 terminate the frame */
2511 brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
2515 brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
2517 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
2521 for (i = 0; i < 3; i++) {
2523 hi = brcmf_sdio_regrb(bus->sdiodev,
2524 SBSDIO_FUNC1_WFRAMEBCHI,
2526 lo = brcmf_sdio_regrb(bus->sdiodev,
2527 SBSDIO_FUNC1_WFRAMEBCLO,
2529 bus->f1regdata += 2;
2530 if ((hi == 0) && (lo == 0))
2536 bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
2538 brcmf_dbg(INFO, "Return_dpc value is : %d\n", ret);
2539 bus->ctrl_frame_stat = false;
2540 brcmf_sdbrcm_wait_event_wakeup(bus);
2542 /* Send queued frames (limit 1 if rx may still be pending) */
2543 else if ((bus->clkstate == CLK_AVAIL) && !bus->fcstate &&
2544 brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit
2546 framecnt = rxdone ? txlimit : min(txlimit, bus->txminmax);
2547 framecnt = brcmf_sdbrcm_sendfromq(bus, framecnt);
2548 txlimit -= framecnt;
2551 /* Resched if events or tx frames are pending,
2552 else await next interrupt */
2553 /* On failed register access, all bets are off:
2554 no resched or interrupts */
2555 if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || (err != 0)) {
2556 brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation\n");
2557 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
2559 } else if (bus->clkstate == CLK_PENDING) {
2560 brcmf_dbg(INFO, "rescheduled due to CLK_PENDING awaiting I_CHIPACTIVE interrupt\n");
2562 } else if (bus->intstatus || bus->ipend ||
2563 (!bus->fcstate && brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol)
2564 && data_ok(bus)) || PKT_AVAILABLE()) {
2568 bus->dpc_sched = resched;
2570 /* If we're done for now, turn off clock request. */
2571 if ((bus->clkstate != CLK_PENDING)
2572 && bus->idletime == BRCMF_IDLE_IMMEDIATE) {
2573 bus->activity = false;
2574 brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
2582 static inline void brcmf_sdbrcm_adddpctsk(struct brcmf_sdio *bus)
2584 struct list_head *new_hd;
2585 unsigned long flags;
2588 new_hd = kzalloc(sizeof(struct list_head), GFP_ATOMIC);
2590 new_hd = kzalloc(sizeof(struct list_head), GFP_KERNEL);
2594 spin_lock_irqsave(&bus->dpc_tl_lock, flags);
2595 list_add_tail(new_hd, &bus->dpc_tsklst);
2596 spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
2599 static int brcmf_sdbrcm_dpc_thread(void *data)
2601 struct brcmf_sdio *bus = (struct brcmf_sdio *) data;
2602 struct list_head *cur_hd, *tmp_hd;
2603 unsigned long flags;
2605 allow_signal(SIGTERM);
2606 /* Run until signal received */
2608 if (kthread_should_stop())
2611 if (list_empty(&bus->dpc_tsklst))
2612 if (wait_for_completion_interruptible(&bus->dpc_wait))
2615 spin_lock_irqsave(&bus->dpc_tl_lock, flags);
2616 list_for_each_safe(cur_hd, tmp_hd, &bus->dpc_tsklst) {
2617 spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
2619 if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
2620 /* after stopping the bus, exit thread */
2621 brcmf_sdbrcm_bus_stop(bus->sdiodev->dev);
2622 bus->dpc_tsk = NULL;
2623 spin_lock_irqsave(&bus->dpc_tl_lock, flags);
2627 if (brcmf_sdbrcm_dpc(bus))
2628 brcmf_sdbrcm_adddpctsk(bus);
2630 spin_lock_irqsave(&bus->dpc_tl_lock, flags);
2634 spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
2639 static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
2643 struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2644 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2645 struct brcmf_sdio *bus = sdiodev->bus;
2647 brcmf_dbg(TRACE, "Enter\n");
2651 /* Add space for the header */
2652 skb_push(pkt, SDPCM_HDRLEN);
2653 /* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */
2655 prec = prio2prec((pkt->priority & PRIOMASK));
2657 /* Check for existing queue, current flow-control,
2658 pending event, or pending clock */
2659 brcmf_dbg(TRACE, "deferring pktq len %d\n", pktq_len(&bus->txq));
2662 /* Priority based enq */
2663 spin_lock_bh(&bus->txqlock);
2664 if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) {
2665 skb_pull(pkt, SDPCM_HDRLEN);
2666 brcmf_txcomplete(bus->sdiodev->dev, pkt, false);
2667 brcmu_pkt_buf_free_skb(pkt);
2668 brcmf_dbg(ERROR, "out of bus->txq !!!\n");
2673 spin_unlock_bh(&bus->txqlock);
2675 if (pktq_len(&bus->txq) >= TXHI) {
2677 brcmf_txflowcontrol(bus->sdiodev->dev, 0, ON);
2681 if (pktq_plen(&bus->txq, prec) > qcount[prec])
2682 qcount[prec] = pktq_plen(&bus->txq, prec);
2684 /* Schedule DPC if needed to send queued packet(s) */
2685 if (!bus->dpc_sched) {
2686 bus->dpc_sched = true;
2688 brcmf_sdbrcm_adddpctsk(bus);
2689 complete(&bus->dpc_wait);
2697 brcmf_sdbrcm_membytes(struct brcmf_sdio *bus, bool write, u32 address, u8 *data,
2704 /* Determine initial transfer parameters */
2705 sdaddr = address & SBSDIO_SB_OFT_ADDR_MASK;
2706 if ((sdaddr + size) & SBSDIO_SBWINDOW_MASK)
2707 dsize = (SBSDIO_SB_OFT_ADDR_LIMIT - sdaddr);
2711 /* Set the backplane window to include the start address */
2712 bcmerror = brcmf_sdcard_set_sbaddr_window(bus->sdiodev, address);
2714 brcmf_dbg(ERROR, "window change failed\n");
2718 /* Do the transfer(s) */
2720 brcmf_dbg(INFO, "%s %d bytes at offset 0x%08x in window 0x%08x\n",
2721 write ? "write" : "read", dsize,
2722 sdaddr, address & SBSDIO_SBWINDOW_MASK);
2723 bcmerror = brcmf_sdcard_rwdata(bus->sdiodev, write,
2724 sdaddr, data, dsize);
2726 brcmf_dbg(ERROR, "membytes transfer failed\n");
2730 /* Adjust for next transfer (if any) */
2735 bcmerror = brcmf_sdcard_set_sbaddr_window(bus->sdiodev,
2738 brcmf_dbg(ERROR, "window change failed\n");
2742 dsize = min_t(uint, SBSDIO_SB_OFT_ADDR_LIMIT, size);
2747 /* Return the window to backplane enumeration space for core access */
2748 if (brcmf_sdcard_set_sbaddr_window(bus->sdiodev, bus->sdiodev->sbwad))
2749 brcmf_dbg(ERROR, "FAILED to set window back to 0x%x\n",
2750 bus->sdiodev->sbwad);
2756 #define CONSOLE_LINE_MAX 192
2758 static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus)
2760 struct brcmf_console *c = &bus->console;
2761 u8 line[CONSOLE_LINE_MAX], ch;
2765 /* Don't do anything until FWREADY updates console address */
2766 if (bus->console_addr == 0)
2769 /* Read console log struct */
2770 addr = bus->console_addr + offsetof(struct rte_console, log_le);
2771 rv = brcmf_sdbrcm_membytes(bus, false, addr, (u8 *)&c->log_le,
2776 /* Allocate console buffer (one time only) */
2777 if (c->buf == NULL) {
2778 c->bufsize = le32_to_cpu(c->log_le.buf_size);
2779 c->buf = kmalloc(c->bufsize, GFP_ATOMIC);
2784 idx = le32_to_cpu(c->log_le.idx);
2786 /* Protect against corrupt value */
2787 if (idx > c->bufsize)
2790 /* Skip reading the console buffer if the index pointer
2795 /* Read the console buffer */
2796 addr = le32_to_cpu(c->log_le.buf);
2797 rv = brcmf_sdbrcm_membytes(bus, false, addr, c->buf, c->bufsize);
2801 while (c->last != idx) {
2802 for (n = 0; n < CONSOLE_LINE_MAX - 2; n++) {
2803 if (c->last == idx) {
2804 /* This would output a partial line.
2806 * the buffer pointer and output this
2807 * line next time around.
2812 c->last = c->bufsize - n;
2815 ch = c->buf[c->last];
2816 c->last = (c->last + 1) % c->bufsize;
2823 if (line[n - 1] == '\r')
2826 pr_debug("CONSOLE: %s\n", line);
2835 static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
2840 bus->ctrl_frame_stat = false;
2841 ret = brcmf_sdcard_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
2842 SDIO_FUNC_2, F2SYNC, frame, len);
2845 /* On failure, abort the command and terminate the frame */
2846 brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
2850 brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
2852 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
2856 for (i = 0; i < 3; i++) {
2858 hi = brcmf_sdio_regrb(bus->sdiodev,
2859 SBSDIO_FUNC1_WFRAMEBCHI, NULL);
2860 lo = brcmf_sdio_regrb(bus->sdiodev,
2861 SBSDIO_FUNC1_WFRAMEBCLO, NULL);
2862 bus->f1regdata += 2;
2863 if (hi == 0 && lo == 0)
2869 bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
2875 brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
2883 struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2884 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2885 struct brcmf_sdio *bus = sdiodev->bus;
2887 brcmf_dbg(TRACE, "Enter\n");
2889 /* Back the pointer to make a room for bus header */
2890 frame = msg - SDPCM_HDRLEN;
2891 len = (msglen += SDPCM_HDRLEN);
2893 /* Add alignment padding (optional for ctl frames) */
2894 doff = ((unsigned long)frame % BRCMF_SDALIGN);
2899 memset(frame, 0, doff + SDPCM_HDRLEN);
2901 /* precondition: doff < BRCMF_SDALIGN */
2902 doff += SDPCM_HDRLEN;
2904 /* Round send length to next SDIO block */
2905 if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
2906 u16 pad = bus->blocksize - (len % bus->blocksize);
2907 if ((pad <= bus->roundup) && (pad < bus->blocksize))
2909 } else if (len % BRCMF_SDALIGN) {
2910 len += BRCMF_SDALIGN - (len % BRCMF_SDALIGN);
2913 /* Satisfy length-alignment requirements */
2914 if (len & (ALIGNMENT - 1))
2915 len = roundup(len, ALIGNMENT);
2917 /* precondition: IS_ALIGNED((unsigned long)frame, 2) */
2919 /* Need to lock here to protect txseq and SDIO tx calls */
2924 /* Make sure backplane clock is on */
2925 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
2927 /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */
2928 *(__le16 *) frame = cpu_to_le16((u16) msglen);
2929 *(((__le16 *) frame) + 1) = cpu_to_le16(~msglen);
2931 /* Software tag: channel, sequence number, data offset */
2933 ((SDPCM_CONTROL_CHANNEL << SDPCM_CHANNEL_SHIFT) &
2935 | bus->tx_seq | ((doff << SDPCM_DOFFSET_SHIFT) &
2936 SDPCM_DOFFSET_MASK);
2937 put_unaligned_le32(swheader, frame + SDPCM_FRAMETAG_LEN);
2938 put_unaligned_le32(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader));
2940 if (!data_ok(bus)) {
2941 brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n",
2942 bus->tx_max, bus->tx_seq);
2943 bus->ctrl_frame_stat = true;
2945 bus->ctrl_frame_buf = frame;
2946 bus->ctrl_frame_len = len;
2948 brcmf_sdbrcm_wait_for_event(bus, &bus->ctrl_frame_stat);
2950 if (!bus->ctrl_frame_stat) {
2951 brcmf_dbg(INFO, "ctrl_frame_stat == false\n");
2954 brcmf_dbg(INFO, "ctrl_frame_stat == true\n");
2960 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
2961 frame, len, "Tx Frame:\n");
2962 brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) &&
2964 frame, min_t(u16, len, 16), "TxHdr:\n");
2967 ret = brcmf_tx_frame(bus, frame, len);
2968 } while (ret < 0 && retries++ < TXRETRIES);
2971 if ((bus->idletime == BRCMF_IDLE_IMMEDIATE) && !bus->dpc_sched) {
2972 bus->activity = false;
2973 brcmf_sdbrcm_clkctl(bus, CLK_NONE, true);
2983 return ret ? -EIO : 0;
2987 brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
2992 struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2993 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2994 struct brcmf_sdio *bus = sdiodev->bus;
2996 brcmf_dbg(TRACE, "Enter\n");
2998 /* Wait until control frame is available */
2999 timeleft = brcmf_sdbrcm_dcmd_resp_wait(bus, &bus->rxlen, &pending);
3003 memcpy(msg, bus->rxctl, min(msglen, rxlen));
3008 brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n",
3010 } else if (timeleft == 0) {
3011 brcmf_dbg(ERROR, "resumed on timeout\n");
3012 } else if (pending) {
3013 brcmf_dbg(CTL, "cancelled\n");
3014 return -ERESTARTSYS;
3016 brcmf_dbg(CTL, "resumed for unknown reason?\n");
3024 return rxlen ? (int)rxlen : -ETIMEDOUT;
3027 static int brcmf_sdbrcm_downloadvars(struct brcmf_sdio *bus, void *arg, int len)
3031 brcmf_dbg(TRACE, "Enter\n");
3033 /* Basic sanity checks */
3034 if (bus->sdiodev->bus_if->drvr_up) {
3035 bcmerror = -EISCONN;
3039 bcmerror = -EOVERFLOW;
3043 /* Free the old ones and replace with passed variables */
3046 bus->vars = kmalloc(len, GFP_ATOMIC);
3047 bus->varsz = bus->vars ? len : 0;
3048 if (bus->vars == NULL) {
3053 /* Copy the passed variables, which should include the
3054 terminating double-null */
3055 memcpy(bus->vars, arg, bus->varsz);
3060 static int brcmf_sdbrcm_write_vars(struct brcmf_sdio *bus)
3069 char *nvram_ularray;
3072 /* Even if there are no vars are to be written, we still
3073 need to set the ramsize. */
3074 varsize = bus->varsz ? roundup(bus->varsz, 4) : 0;
3075 varaddr = (bus->ramsize - 4) - varsize;
3078 vbuffer = kzalloc(varsize, GFP_ATOMIC);
3082 memcpy(vbuffer, bus->vars, bus->varsz);
3084 /* Write the vars list */
3086 brcmf_sdbrcm_membytes(bus, true, varaddr, vbuffer, varsize);
3088 /* Verify NVRAM bytes */
3089 brcmf_dbg(INFO, "Compare NVRAM dl & ul; varsize=%d\n", varsize);
3090 nvram_ularray = kmalloc(varsize, GFP_ATOMIC);
3091 if (!nvram_ularray) {
3096 /* Upload image to verify downloaded contents. */
3097 memset(nvram_ularray, 0xaa, varsize);
3099 /* Read the vars list to temp buffer for comparison */
3101 brcmf_sdbrcm_membytes(bus, false, varaddr, nvram_ularray,
3104 brcmf_dbg(ERROR, "error %d on reading %d nvram bytes at 0x%08x\n",
3105 bcmerror, varsize, varaddr);
3107 /* Compare the org NVRAM with the one read from RAM */
3108 if (memcmp(vbuffer, nvram_ularray, varsize))
3109 brcmf_dbg(ERROR, "Downloaded NVRAM image is corrupted\n");
3111 brcmf_dbg(ERROR, "Download/Upload/Compare of NVRAM ok\n");
3113 kfree(nvram_ularray);
3119 /* adjust to the user specified RAM */
3120 brcmf_dbg(INFO, "Physical memory size: %d\n", bus->ramsize);
3121 brcmf_dbg(INFO, "Vars are at %d, orig varsize is %d\n",
3123 varsize = ((bus->ramsize - 4) - varaddr);
3126 * Determine the length token:
3127 * Varsize, converted to words, in lower 16-bits, checksum
3132 varsizew_le = cpu_to_le32(0);
3134 varsizew = varsize / 4;
3135 varsizew = (~varsizew << 16) | (varsizew & 0x0000FFFF);
3136 varsizew_le = cpu_to_le32(varsizew);
3139 brcmf_dbg(INFO, "New varsize is %d, length token=0x%08x\n",
3142 /* Write the length token to the last word */
3143 bcmerror = brcmf_sdbrcm_membytes(bus, true, (bus->ramsize - 4),
3144 (u8 *)&varsizew_le, 4);
3149 static int brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter)
3152 struct chip_info *ci = bus->ci;
3154 /* To enter download state, disable ARM and reset SOCRAM.
3155 * To exit download state, simply reset ARM (default is RAM boot).
3158 bus->alp_only = true;
3160 ci->coredisable(bus->sdiodev, ci, BCMA_CORE_ARM_CM3);
3162 ci->resetcore(bus->sdiodev, ci, BCMA_CORE_INTERNAL_MEM);
3164 /* Clear the top bit of memory */
3167 brcmf_sdbrcm_membytes(bus, true, bus->ramsize - 4,
3171 if (!ci->iscoreup(bus->sdiodev, ci, BCMA_CORE_INTERNAL_MEM)) {
3172 brcmf_dbg(ERROR, "SOCRAM core is down after reset?\n");
3177 bcmerror = brcmf_sdbrcm_write_vars(bus);
3179 brcmf_dbg(ERROR, "no vars written to RAM\n");
3183 w_sdreg32(bus, 0xFFFFFFFF,
3184 offsetof(struct sdpcmd_regs, intstatus));
3186 ci->resetcore(bus->sdiodev, ci, BCMA_CORE_ARM_CM3);
3188 /* Allow HT Clock now that the ARM is running. */
3189 bus->alp_only = false;
3191 bus->sdiodev->bus_if->state = BRCMF_BUS_LOAD;
3197 static int brcmf_sdbrcm_get_image(char *buf, int len, struct brcmf_sdio *bus)
3199 if (bus->firmware->size < bus->fw_ptr + len)
3200 len = bus->firmware->size - bus->fw_ptr;
3202 memcpy(buf, &bus->firmware->data[bus->fw_ptr], len);
3207 static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus)
3211 u8 *memblock = NULL, *memptr;
3214 brcmf_dbg(INFO, "Enter\n");
3216 ret = request_firmware(&bus->firmware, BRCMF_SDIO_FW_NAME,
3217 &bus->sdiodev->func[2]->dev);
3219 brcmf_dbg(ERROR, "Fail to request firmware %d\n", ret);
3224 memptr = memblock = kmalloc(MEMBLOCK + BRCMF_SDALIGN, GFP_ATOMIC);
3225 if (memblock == NULL) {
3229 if ((u32)(unsigned long)memblock % BRCMF_SDALIGN)
3230 memptr += (BRCMF_SDALIGN -
3231 ((u32)(unsigned long)memblock % BRCMF_SDALIGN));
3233 /* Download image */
3235 brcmf_sdbrcm_get_image((char *)memptr, MEMBLOCK, bus))) {
3236 ret = brcmf_sdbrcm_membytes(bus, true, offset, memptr, len);
3238 brcmf_dbg(ERROR, "error %d on writing %d membytes at 0x%08x\n",
3239 ret, MEMBLOCK, offset);
3249 release_firmware(bus->firmware);
3256 * ProcessVars:Takes a buffer of "<var>=<value>\n" lines read from a file
3257 * and ending in a NUL.
3258 * Removes carriage returns, empty lines, comment lines, and converts
3260 * Shortens buffer as needed and pads with NULs. End of buffer is marked
3264 static uint brcmf_process_nvram_vars(char *varbuf, uint len)
3273 findNewline = false;
3276 for (n = 0; n < len; n++) {
3279 if (varbuf[n] == '\r')
3281 if (findNewline && varbuf[n] != '\n')
3283 findNewline = false;
3284 if (varbuf[n] == '#') {
3288 if (varbuf[n] == '\n') {
3298 buf_len = dp - varbuf;
3300 while (dp < varbuf + n)
3306 static int brcmf_sdbrcm_download_nvram(struct brcmf_sdio *bus)
3309 char *memblock = NULL;
3313 ret = request_firmware(&bus->firmware, BRCMF_SDIO_NV_NAME,
3314 &bus->sdiodev->func[2]->dev);
3316 brcmf_dbg(ERROR, "Fail to request nvram %d\n", ret);
3321 memblock = kmalloc(MEMBLOCK, GFP_ATOMIC);
3322 if (memblock == NULL) {
3327 len = brcmf_sdbrcm_get_image(memblock, MEMBLOCK, bus);
3329 if (len > 0 && len < MEMBLOCK) {
3330 bufp = (char *)memblock;
3332 len = brcmf_process_nvram_vars(bufp, len);
3336 ret = brcmf_sdbrcm_downloadvars(bus, memblock, len + 1);
3338 brcmf_dbg(ERROR, "error downloading vars: %d\n", ret);
3340 brcmf_dbg(ERROR, "error reading nvram file: %d\n", len);
3347 release_firmware(bus->firmware);
3353 static int _brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
3357 /* Keep arm in reset */
3358 if (brcmf_sdbrcm_download_state(bus, true)) {
3359 brcmf_dbg(ERROR, "error placing ARM core in reset\n");
3363 /* External image takes precedence if specified */
3364 if (brcmf_sdbrcm_download_code_file(bus)) {
3365 brcmf_dbg(ERROR, "dongle image file download failed\n");
3369 /* External nvram takes precedence if specified */
3370 if (brcmf_sdbrcm_download_nvram(bus))
3371 brcmf_dbg(ERROR, "dongle nvram file download failed\n");
3373 /* Take arm out of reset */
3374 if (brcmf_sdbrcm_download_state(bus, false)) {
3375 brcmf_dbg(ERROR, "error getting out of ARM core reset\n");
3386 brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
3390 /* Download the firmware */
3391 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3393 ret = _brcmf_sdbrcm_download_firmware(bus) == 0;
3395 brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
3400 static int brcmf_sdbrcm_bus_init(struct device *dev)
3402 struct brcmf_bus *bus_if = dev_get_drvdata(dev);
3403 struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
3404 struct brcmf_sdio *bus = sdiodev->bus;
3405 unsigned long timeout;
3410 brcmf_dbg(TRACE, "Enter\n");
3412 /* try to download image and nvram to the dongle */
3413 if (bus_if->state == BRCMF_BUS_DOWN) {
3414 if (!(brcmf_sdbrcm_download_firmware(bus)))
3418 if (!bus->sdiodev->bus_if->drvr)
3421 /* Start the watchdog timer */
3423 brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
3427 /* Make sure backplane clock is on, needed to generate F2 interrupt */
3428 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3429 if (bus->clkstate != CLK_AVAIL)
3432 /* Force clocks on backplane to be sure F2 interrupt propagates */
3433 saveclk = brcmf_sdio_regrb(bus->sdiodev,
3434 SBSDIO_FUNC1_CHIPCLKCSR, &err);
3436 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
3437 (saveclk | SBSDIO_FORCE_HT), &err);
3440 brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
3444 /* Enable function 2 (frame transfers) */
3445 w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
3446 offsetof(struct sdpcmd_regs, tosbmailboxdata));
3447 enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2);
3449 brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
3451 timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY);
3453 while (enable != ready) {
3454 ready = brcmf_sdio_regrb(bus->sdiodev,
3455 SDIO_CCCR_IORx, NULL);
3456 if (time_after(jiffies, timeout))
3458 else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50))
3459 /* prevent busy waiting if it takes too long */
3460 msleep_interruptible(20);
3463 brcmf_dbg(INFO, "enable 0x%02x, ready 0x%02x\n", enable, ready);
3465 /* If F2 successfully enabled, set core and enable interrupts */
3466 if (ready == enable) {
3467 /* Set up the interrupt mask and enable interrupts */
3468 bus->hostintmask = HOSTINTMASK;
3469 w_sdreg32(bus, bus->hostintmask,
3470 offsetof(struct sdpcmd_regs, hostintmask));
3472 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err);
3474 /* Disable F2 again */
3475 enable = SDIO_FUNC_ENABLE_1;
3476 brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx, enable, NULL);
3480 /* Restore previous clock setting */
3481 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
3484 ret = brcmf_sdio_intr_register(bus->sdiodev);
3486 brcmf_dbg(ERROR, "intr register failed:%d\n", ret);
3489 /* If we didn't come up, turn off backplane clock */
3490 if (bus_if->state != BRCMF_BUS_DATA)
3491 brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
3499 void brcmf_sdbrcm_isr(void *arg)
3501 struct brcmf_sdio *bus = (struct brcmf_sdio *) arg;
3503 brcmf_dbg(TRACE, "Enter\n");
3506 brcmf_dbg(ERROR, "bus is null pointer, exiting\n");
3510 if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
3511 brcmf_dbg(ERROR, "bus is down. we have nothing to do\n");
3514 /* Count the interrupt call */
3518 /* Shouldn't get this interrupt if we're sleeping? */
3519 if (bus->sleeping) {
3520 brcmf_dbg(ERROR, "INTERRUPT WHILE SLEEPING??\n");
3524 /* Disable additional interrupts (is this needed now)? */
3526 brcmf_dbg(ERROR, "isr w/o interrupt configured!\n");
3528 bus->dpc_sched = true;
3530 brcmf_sdbrcm_adddpctsk(bus);
3531 complete(&bus->dpc_wait);
3535 static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
3538 struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev);
3541 brcmf_dbg(TIMER, "Enter\n");
3543 /* Ignore the timer if simulating bus down */
3549 /* Poll period: check device if appropriate. */
3550 if (bus->poll && (++bus->polltick >= bus->pollrate)) {
3553 /* Reset poll tick */
3556 /* Check device if no interrupts */
3557 if (!bus->intr || (bus->intrcount == bus->lastintrs)) {
3559 if (!bus->dpc_sched) {
3561 devpend = brcmf_sdio_regrb(bus->sdiodev,
3565 devpend & (INTR_STATUS_FUNC1 |
3569 /* If there is something, make like the ISR and
3575 bus->dpc_sched = true;
3577 brcmf_sdbrcm_adddpctsk(bus);
3578 complete(&bus->dpc_wait);
3583 /* Update interrupt tracking */
3584 bus->lastintrs = bus->intrcount;
3587 /* Poll for console output periodically */
3588 if (bus_if->state == BRCMF_BUS_DATA &&
3589 bus->console_interval != 0) {
3590 bus->console.count += BRCMF_WD_POLL_MS;
3591 if (bus->console.count >= bus->console_interval) {
3592 bus->console.count -= bus->console_interval;
3593 /* Make sure backplane clock is on */
3594 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3595 if (brcmf_sdbrcm_readconsole(bus) < 0)
3597 bus->console_interval = 0;
3602 /* On idle timeout clear activity flag and/or turn off clock */
3603 if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
3604 if (++bus->idlecount >= bus->idletime) {
3606 if (bus->activity) {
3607 bus->activity = false;
3608 brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
3610 brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
3620 static bool brcmf_sdbrcm_chipmatch(u16 chipid)
3622 if (chipid == BCM4329_CHIP_ID)
3624 if (chipid == BCM4330_CHIP_ID)
3629 static void brcmf_sdbrcm_release_malloc(struct brcmf_sdio *bus)
3631 brcmf_dbg(TRACE, "Enter\n");
3634 bus->rxctl = bus->rxbuf = NULL;
3637 kfree(bus->databuf);
3638 bus->databuf = NULL;
3641 static bool brcmf_sdbrcm_probe_malloc(struct brcmf_sdio *bus)
3643 brcmf_dbg(TRACE, "Enter\n");
3645 if (bus->sdiodev->bus_if->maxctl) {
3647 roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN),
3648 ALIGNMENT) + BRCMF_SDALIGN;
3649 bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC);
3654 /* Allocate buffer to receive glomed packet */
3655 bus->databuf = kmalloc(MAX_DATA_BUF, GFP_ATOMIC);
3656 if (!(bus->databuf)) {
3657 /* release rxbuf which was already located as above */
3663 /* Align the buffer */
3664 if ((unsigned long)bus->databuf % BRCMF_SDALIGN)
3665 bus->dataptr = bus->databuf + (BRCMF_SDALIGN -
3666 ((unsigned long)bus->databuf % BRCMF_SDALIGN));
3668 bus->dataptr = bus->databuf;
3677 brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
3685 bus->alp_only = true;
3687 pr_debug("F1 signature read @0x18000000=0x%4x\n",
3688 brcmf_sdio_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
3691 * Force PLL off until brcmf_sdio_chip_attach()
3692 * programs PLL control regs
3695 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
3696 BRCMF_INIT_CLKCTL1, &err);
3698 clkctl = brcmf_sdio_regrb(bus->sdiodev,
3699 SBSDIO_FUNC1_CHIPCLKCSR, &err);
3701 if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
3702 brcmf_dbg(ERROR, "ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
3703 err, BRCMF_INIT_CLKCTL1, clkctl);
3707 if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci, regsva)) {
3708 brcmf_dbg(ERROR, "brcmf_sdio_chip_attach failed!\n");
3712 if (!brcmf_sdbrcm_chipmatch((u16) bus->ci->chip)) {
3713 brcmf_dbg(ERROR, "unsupported chip: 0x%04x\n", bus->ci->chip);
3717 brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci,
3718 SDIO_DRIVE_STRENGTH);
3720 /* Get info on the SOCRAM cores... */
3721 bus->ramsize = bus->ci->ramsize;
3722 if (!(bus->ramsize)) {
3723 brcmf_dbg(ERROR, "failed to find SOCRAM memory!\n");
3727 /* Set core control so an SDIO reset does a backplane reset */
3728 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
3729 reg_addr = bus->ci->c_inf[idx].base +
3730 offsetof(struct sdpcmd_regs, corecontrol);
3731 reg_val = brcmf_sdio_regrl(bus->sdiodev, reg_addr, NULL);
3732 brcmf_sdio_regwl(bus->sdiodev, reg_addr, reg_val | CC_BPRESEN, NULL);
3734 brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
3736 /* Locate an appropriately-aligned portion of hdrbuf */
3737 bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0],
3740 /* Set the poll and/or interrupt flags */
3752 static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus)
3754 brcmf_dbg(TRACE, "Enter\n");
3756 /* Disable F2 to clear any intermediate frame state on the dongle */
3757 brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_IOEx,
3758 SDIO_FUNC_ENABLE_1, NULL);
3760 bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
3761 bus->sleeping = false;
3762 bus->rxflow = false;
3764 /* Done with backplane-dependent accesses, can drop clock... */
3765 brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
3767 /* ...and initialize clock/power states */
3768 bus->clkstate = CLK_SDONLY;
3769 bus->idletime = BRCMF_IDLE_INTERVAL;
3770 bus->idleclock = BRCMF_IDLE_ACTIVE;
3772 /* Query the F2 block size, set roundup accordingly */
3773 bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
3774 bus->roundup = min(max_roundup, bus->blocksize);
3776 /* bus module does not support packet chaining */
3777 bus->use_rxchain = false;
3778 bus->sd_rxchain = false;
3784 brcmf_sdbrcm_watchdog_thread(void *data)
3786 struct brcmf_sdio *bus = (struct brcmf_sdio *)data;
3788 allow_signal(SIGTERM);
3789 /* Run until signal received */
3791 if (kthread_should_stop())
3793 if (!wait_for_completion_interruptible(&bus->watchdog_wait)) {
3794 brcmf_sdbrcm_bus_watchdog(bus);
3795 /* Count the tick for reference */
3804 brcmf_sdbrcm_watchdog(unsigned long data)
3806 struct brcmf_sdio *bus = (struct brcmf_sdio *)data;
3808 if (bus->watchdog_tsk) {
3809 complete(&bus->watchdog_wait);
3810 /* Reschedule the watchdog */
3811 if (bus->wd_timer_valid)
3812 mod_timer(&bus->timer,
3813 jiffies + BRCMF_WD_POLL_MS * HZ / 1000);
3817 static void brcmf_sdbrcm_release_dongle(struct brcmf_sdio *bus)
3819 brcmf_dbg(TRACE, "Enter\n");
3822 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3823 brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
3824 brcmf_sdio_chip_detach(&bus->ci);
3825 if (bus->vars && bus->varsz)
3830 brcmf_dbg(TRACE, "Disconnected\n");
3833 /* Detach and free everything */
3834 static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
3836 brcmf_dbg(TRACE, "Enter\n");
3839 /* De-register interrupt handler */
3840 brcmf_sdio_intr_unregister(bus->sdiodev);
3842 if (bus->sdiodev->bus_if->drvr) {
3843 brcmf_detach(bus->sdiodev->dev);
3844 brcmf_sdbrcm_release_dongle(bus);
3847 brcmf_sdbrcm_release_malloc(bus);
3852 brcmf_dbg(TRACE, "Disconnected\n");
3855 void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
3858 struct brcmf_sdio *bus;
3860 brcmf_dbg(TRACE, "Enter\n");
3862 /* We make an assumption about address window mappings:
3863 * regsva == SI_ENUM_BASE*/
3865 /* Allocate private bus interface state */
3866 bus = kzalloc(sizeof(struct brcmf_sdio), GFP_ATOMIC);
3870 bus->sdiodev = sdiodev;
3872 skb_queue_head_init(&bus->glom);
3873 bus->txbound = BRCMF_TXBOUND;
3874 bus->rxbound = BRCMF_RXBOUND;
3875 bus->txminmax = BRCMF_TXMINMAX;
3876 bus->tx_seq = SDPCM_SEQUENCE_WRAP - 1;
3877 bus->usebufpool = false; /* Use bufpool if allocated,
3878 else use locally malloced rxbuf */
3880 /* attempt to attach to the dongle */
3881 if (!(brcmf_sdbrcm_probe_attach(bus, regsva))) {
3882 brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_attach failed\n");
3886 spin_lock_init(&bus->txqlock);
3887 init_waitqueue_head(&bus->ctrl_wait);
3888 init_waitqueue_head(&bus->dcmd_resp_wait);
3890 /* Set up the watchdog timer */
3891 init_timer(&bus->timer);
3892 bus->timer.data = (unsigned long)bus;
3893 bus->timer.function = brcmf_sdbrcm_watchdog;
3895 /* Initialize thread based operation and lock */
3896 sema_init(&bus->sdsem, 1);
3898 /* Initialize watchdog thread */
3899 init_completion(&bus->watchdog_wait);
3900 bus->watchdog_tsk = kthread_run(brcmf_sdbrcm_watchdog_thread,
3901 bus, "brcmf_watchdog");
3902 if (IS_ERR(bus->watchdog_tsk)) {
3903 pr_warn("brcmf_watchdog thread failed to start\n");
3904 bus->watchdog_tsk = NULL;
3906 /* Initialize DPC thread */
3907 init_completion(&bus->dpc_wait);
3908 INIT_LIST_HEAD(&bus->dpc_tsklst);
3909 spin_lock_init(&bus->dpc_tl_lock);
3910 bus->dpc_tsk = kthread_run(brcmf_sdbrcm_dpc_thread,
3912 if (IS_ERR(bus->dpc_tsk)) {
3913 pr_warn("brcmf_dpc thread failed to start\n");
3914 bus->dpc_tsk = NULL;
3917 /* Assign bus interface call back */
3918 bus->sdiodev->bus_if->brcmf_bus_stop = brcmf_sdbrcm_bus_stop;
3919 bus->sdiodev->bus_if->brcmf_bus_init = brcmf_sdbrcm_bus_init;
3920 bus->sdiodev->bus_if->brcmf_bus_txdata = brcmf_sdbrcm_bus_txdata;
3921 bus->sdiodev->bus_if->brcmf_bus_txctl = brcmf_sdbrcm_bus_txctl;
3922 bus->sdiodev->bus_if->brcmf_bus_rxctl = brcmf_sdbrcm_bus_rxctl;
3923 /* Attach to the brcmf/OS/network interface */
3924 ret = brcmf_attach(SDPCM_RESERVE, bus->sdiodev->dev);
3926 brcmf_dbg(ERROR, "brcmf_attach failed\n");
3930 /* Allocate buffers */
3931 if (!(brcmf_sdbrcm_probe_malloc(bus))) {
3932 brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_malloc failed\n");
3936 if (!(brcmf_sdbrcm_probe_init(bus))) {
3937 brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_init failed\n");
3941 brcmf_dbg(INFO, "completed!!\n");
3943 /* if firmware path present try to download and bring up bus */
3944 ret = brcmf_bus_start(bus->sdiodev->dev);
3946 if (ret == -ENOLINK) {
3947 brcmf_dbg(ERROR, "dongle is not responding\n");
3955 brcmf_sdbrcm_release(bus);
3959 void brcmf_sdbrcm_disconnect(void *ptr)
3961 struct brcmf_sdio *bus = (struct brcmf_sdio *)ptr;
3963 brcmf_dbg(TRACE, "Enter\n");
3966 brcmf_sdbrcm_release(bus);
3968 brcmf_dbg(TRACE, "Disconnected\n");
3972 brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick)
3974 /* Totally stop the timer */
3975 if (!wdtick && bus->wd_timer_valid) {
3976 del_timer_sync(&bus->timer);
3977 bus->wd_timer_valid = false;
3978 bus->save_ms = wdtick;
3982 /* don't start the wd until fw is loaded */
3983 if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN)
3987 if (bus->save_ms != BRCMF_WD_POLL_MS) {
3988 if (bus->wd_timer_valid)
3989 /* Stop timer and restart at new value */
3990 del_timer_sync(&bus->timer);
3992 /* Create timer again when watchdog period is
3993 dynamically changed or in the first instance
3995 bus->timer.expires =
3996 jiffies + BRCMF_WD_POLL_MS * HZ / 1000;
3997 add_timer(&bus->timer);
4000 /* Re arm the timer, at last watchdog period */
4001 mod_timer(&bus->timer,
4002 jiffies + BRCMF_WD_POLL_MS * HZ / 1000);
4005 bus->wd_timer_valid = true;
4006 bus->save_ms = wdtick;
projects / firefly-linux-kernel-4.4.55.git / blob