drivers/net/wireless/b43/main.c

   1 /*
   2
   3   Broadcom B43 wireless driver
   4
   5   Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
   6   Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it>
   7   Copyright (c) 2005-2009 Michael Buesch <m@bues.ch>
   8   Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
   9   Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
  10   Copyright (c) 2010-2011 Rafał Miłecki <zajec5@gmail.com>
  11
  12   SDIO support
  13   Copyright (c) 2009 Albert Herranz <albert_herranz@yahoo.es>
  14
  15   Some parts of the code in this file are derived from the ipw2200
  16   driver  Copyright(c) 2003 - 2004 Intel Corporation.
  17
  18   This program is free software; you can redistribute it and/or modify
  19   it under the terms of the GNU General Public License as published by
  20   the Free Software Foundation; either version 2 of the License, or
  21   (at your option) any later version.
  22
  23   This program is distributed in the hope that it will be useful,
  24   but WITHOUT ANY WARRANTY; without even the implied warranty of
  25   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  26   GNU General Public License for more details.
  27
  28   You should have received a copy of the GNU General Public License
  29   along with this program; see the file COPYING.  If not, write to
  30   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
  31   Boston, MA 02110-1301, USA.
  32
  33 */
  34
  35 #include <linux/delay.h>
  36 #include <linux/init.h>
  37 #include <linux/module.h>
  38 #include <linux/if_arp.h>
  39 #include <linux/etherdevice.h>
  40 #include <linux/firmware.h>
  41 #include <linux/workqueue.h>
  42 #include <linux/skbuff.h>
  43 #include <linux/io.h>
  44 #include <linux/dma-mapping.h>
  45 #include <linux/slab.h>
  46 #include <asm/unaligned.h>
  47
  48 #include "b43.h"
  49 #include "main.h"
  50 #include "debugfs.h"
  51 #include "phy_common.h"
  52 #include "phy_g.h"
  53 #include "phy_n.h"
  54 #include "dma.h"
  55 #include "pio.h"
  56 #include "sysfs.h"
  57 #include "xmit.h"
  58 #include "lo.h"
  59 #include "pcmcia.h"
  60 #include "sdio.h"
  61 #include <linux/mmc/sdio_func.h>
  62
  63 MODULE_DESCRIPTION("Broadcom B43 wireless driver");
  64 MODULE_AUTHOR("Martin Langer");
  65 MODULE_AUTHOR("Stefano Brivio");
  66 MODULE_AUTHOR("Michael Buesch");
  67 MODULE_AUTHOR("Gábor Stefanik");
  68 MODULE_AUTHOR("Rafał Miłecki");
  69 MODULE_LICENSE("GPL");
  70
  71 MODULE_FIRMWARE("b43/ucode11.fw");
  72 MODULE_FIRMWARE("b43/ucode13.fw");
  73 MODULE_FIRMWARE("b43/ucode14.fw");
  74 MODULE_FIRMWARE("b43/ucode15.fw");
  75 MODULE_FIRMWARE("b43/ucode16_mimo.fw");
  76 MODULE_FIRMWARE("b43/ucode5.fw");
  77 MODULE_FIRMWARE("b43/ucode9.fw");
  78
  79 static int modparam_bad_frames_preempt;
  80 module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
  81 MODULE_PARM_DESC(bad_frames_preempt,
  82                  "enable(1) / disable(0) Bad Frames Preemption");
  83
  84 static char modparam_fwpostfix[16];
  85 module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
  86 MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load.");
  87
  88 static int modparam_hwpctl;
  89 module_param_named(hwpctl, modparam_hwpctl, int, 0444);
  90 MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)");
  91
  92 static int modparam_nohwcrypt;
  93 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
  94 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  95
  96 static int modparam_hwtkip;
  97 module_param_named(hwtkip, modparam_hwtkip, int, 0444);
  98 MODULE_PARM_DESC(hwtkip, "Enable hardware tkip.");
  99
 100 static int modparam_qos = 1;
 101 module_param_named(qos, modparam_qos, int, 0444);
 102 MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
 103
 104 static int modparam_btcoex = 1;
 105 module_param_named(btcoex, modparam_btcoex, int, 0444);
 106 MODULE_PARM_DESC(btcoex, "Enable Bluetooth coexistence (default on)");
 107
 108 int b43_modparam_verbose = B43_VERBOSITY_DEFAULT;
 109 module_param_named(verbose, b43_modparam_verbose, int, 0644);
 110 MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");
 111
 112 static int b43_modparam_pio = 0;
 113 module_param_named(pio, b43_modparam_pio, int, 0644);
 114 MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
 115
 116 #ifdef CONFIG_B43_BCMA
 117 static const struct bcma_device_id b43_bcma_tbl[] = {
 118         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x11, BCMA_ANY_CLASS),
 119 #ifdef CONFIG_B43_BCMA_EXTRA
 120         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS),
 121         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS),
 122 #endif
 123         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1D, BCMA_ANY_CLASS),
 124         BCMA_CORETABLE_END
 125 };
 126 MODULE_DEVICE_TABLE(bcma, b43_bcma_tbl);
 127 #endif
 128
 129 #ifdef CONFIG_B43_SSB
 130 static const struct ssb_device_id b43_ssb_tbl[] = {
 131         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
 132         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6),
 133         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7),
 134         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9),
 135         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10),
 136         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 11),
 137         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 12),
 138         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 13),
 139         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 15),
 140         SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 16),
 141         SSB_DEVTABLE_END
 142 };
 143 MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl);
 144 #endif
 145
 146 /* Channel and ratetables are shared for all devices.
 147  * They can't be const, because ieee80211 puts some precalculated
 148  * data in there. This data is the same for all devices, so we don't
 149  * get concurrency issues */
 150 #define RATETAB_ENT(_rateid, _flags) \
 151         {                                                               \
 152                 .bitrate        = B43_RATE_TO_BASE100KBPS(_rateid),     \
 153                 .hw_value       = (_rateid),                            \
 154                 .flags          = (_flags),                             \
 155         }
 156
 157 /*
 158  * NOTE: When changing this, sync with xmit.c's
 159  *       b43_plcp_get_bitrate_idx_* functions!
 160  */
 161 static struct ieee80211_rate __b43_ratetable[] = {
 162         RATETAB_ENT(B43_CCK_RATE_1MB, 0),
 163         RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE),
 164         RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE),
 165         RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE),
 166         RATETAB_ENT(B43_OFDM_RATE_6MB, 0),
 167         RATETAB_ENT(B43_OFDM_RATE_9MB, 0),
 168         RATETAB_ENT(B43_OFDM_RATE_12MB, 0),
 169         RATETAB_ENT(B43_OFDM_RATE_18MB, 0),
 170         RATETAB_ENT(B43_OFDM_RATE_24MB, 0),
 171         RATETAB_ENT(B43_OFDM_RATE_36MB, 0),
 172         RATETAB_ENT(B43_OFDM_RATE_48MB, 0),
 173         RATETAB_ENT(B43_OFDM_RATE_54MB, 0),
 174 };
 175
 176 #define b43_a_ratetable         (__b43_ratetable + 4)
 177 #define b43_a_ratetable_size    8
 178 #define b43_b_ratetable         (__b43_ratetable + 0)
 179 #define b43_b_ratetable_size    4
 180 #define b43_g_ratetable         (__b43_ratetable + 0)
 181 #define b43_g_ratetable_size    12
 182
 183 #define CHAN4G(_channel, _freq, _flags) {                       \
 184         .band                   = IEEE80211_BAND_2GHZ,          \
 185         .center_freq            = (_freq),                      \
 186         .hw_value               = (_channel),                   \
 187         .flags                  = (_flags),                     \
 188         .max_antenna_gain       = 0,                            \
 189         .max_power              = 30,                           \
 190 }
 191 static struct ieee80211_channel b43_2ghz_chantable[] = {
 192         CHAN4G(1, 2412, 0),
 193         CHAN4G(2, 2417, 0),
 194         CHAN4G(3, 2422, 0),
 195         CHAN4G(4, 2427, 0),
 196         CHAN4G(5, 2432, 0),
 197         CHAN4G(6, 2437, 0),
 198         CHAN4G(7, 2442, 0),
 199         CHAN4G(8, 2447, 0),
 200         CHAN4G(9, 2452, 0),
 201         CHAN4G(10, 2457, 0),
 202         CHAN4G(11, 2462, 0),
 203         CHAN4G(12, 2467, 0),
 204         CHAN4G(13, 2472, 0),
 205         CHAN4G(14, 2484, 0),
 206 };
 207 #undef CHAN4G
 208
 209 #define CHAN5G(_channel, _flags) {                              \
 210         .band                   = IEEE80211_BAND_5GHZ,          \
 211         .center_freq            = 5000 + (5 * (_channel)),      \
 212         .hw_value               = (_channel),                   \
 213         .flags                  = (_flags),                     \
 214         .max_antenna_gain       = 0,                            \
 215         .max_power              = 30,                           \
 216 }
 217 static struct ieee80211_channel b43_5ghz_nphy_chantable[] = {
 218         CHAN5G(32, 0),          CHAN5G(34, 0),
 219         CHAN5G(36, 0),          CHAN5G(38, 0),
 220         CHAN5G(40, 0),          CHAN5G(42, 0),
 221         CHAN5G(44, 0),          CHAN5G(46, 0),
 222         CHAN5G(48, 0),          CHAN5G(50, 0),
 223         CHAN5G(52, 0),          CHAN5G(54, 0),
 224         CHAN5G(56, 0),          CHAN5G(58, 0),
 225         CHAN5G(60, 0),          CHAN5G(62, 0),
 226         CHAN5G(64, 0),          CHAN5G(66, 0),
 227         CHAN5G(68, 0),          CHAN5G(70, 0),
 228         CHAN5G(72, 0),          CHAN5G(74, 0),
 229         CHAN5G(76, 0),          CHAN5G(78, 0),
 230         CHAN5G(80, 0),          CHAN5G(82, 0),
 231         CHAN5G(84, 0),          CHAN5G(86, 0),
 232         CHAN5G(88, 0),          CHAN5G(90, 0),
 233         CHAN5G(92, 0),          CHAN5G(94, 0),
 234         CHAN5G(96, 0),          CHAN5G(98, 0),
 235         CHAN5G(100, 0),         CHAN5G(102, 0),
 236         CHAN5G(104, 0),         CHAN5G(106, 0),
 237         CHAN5G(108, 0),         CHAN5G(110, 0),
 238         CHAN5G(112, 0),         CHAN5G(114, 0),
 239         CHAN5G(116, 0),         CHAN5G(118, 0),
 240         CHAN5G(120, 0),         CHAN5G(122, 0),
 241         CHAN5G(124, 0),         CHAN5G(126, 0),
 242         CHAN5G(128, 0),         CHAN5G(130, 0),
 243         CHAN5G(132, 0),         CHAN5G(134, 0),
 244         CHAN5G(136, 0),         CHAN5G(138, 0),
 245         CHAN5G(140, 0),         CHAN5G(142, 0),
 246         CHAN5G(144, 0),         CHAN5G(145, 0),
 247         CHAN5G(146, 0),         CHAN5G(147, 0),
 248         CHAN5G(148, 0),         CHAN5G(149, 0),
 249         CHAN5G(150, 0),         CHAN5G(151, 0),
 250         CHAN5G(152, 0),         CHAN5G(153, 0),
 251         CHAN5G(154, 0),         CHAN5G(155, 0),
 252         CHAN5G(156, 0),         CHAN5G(157, 0),
 253         CHAN5G(158, 0),         CHAN5G(159, 0),
 254         CHAN5G(160, 0),         CHAN5G(161, 0),
 255         CHAN5G(162, 0),         CHAN5G(163, 0),
 256         CHAN5G(164, 0),         CHAN5G(165, 0),
 257         CHAN5G(166, 0),         CHAN5G(168, 0),
 258         CHAN5G(170, 0),         CHAN5G(172, 0),
 259         CHAN5G(174, 0),         CHAN5G(176, 0),
 260         CHAN5G(178, 0),         CHAN5G(180, 0),
 261         CHAN5G(182, 0),         CHAN5G(184, 0),
 262         CHAN5G(186, 0),         CHAN5G(188, 0),
 263         CHAN5G(190, 0),         CHAN5G(192, 0),
 264         CHAN5G(194, 0),         CHAN5G(196, 0),
 265         CHAN5G(198, 0),         CHAN5G(200, 0),
 266         CHAN5G(202, 0),         CHAN5G(204, 0),
 267         CHAN5G(206, 0),         CHAN5G(208, 0),
 268         CHAN5G(210, 0),         CHAN5G(212, 0),
 269         CHAN5G(214, 0),         CHAN5G(216, 0),
 270         CHAN5G(218, 0),         CHAN5G(220, 0),
 271         CHAN5G(222, 0),         CHAN5G(224, 0),
 272         CHAN5G(226, 0),         CHAN5G(228, 0),
 273 };
 274
 275 static struct ieee80211_channel b43_5ghz_aphy_chantable[] = {
 276         CHAN5G(34, 0),          CHAN5G(36, 0),
 277         CHAN5G(38, 0),          CHAN5G(40, 0),
 278         CHAN5G(42, 0),          CHAN5G(44, 0),
 279         CHAN5G(46, 0),          CHAN5G(48, 0),
 280         CHAN5G(52, 0),          CHAN5G(56, 0),
 281         CHAN5G(60, 0),          CHAN5G(64, 0),
 282         CHAN5G(100, 0),         CHAN5G(104, 0),
 283         CHAN5G(108, 0),         CHAN5G(112, 0),
 284         CHAN5G(116, 0),         CHAN5G(120, 0),
 285         CHAN5G(124, 0),         CHAN5G(128, 0),
 286         CHAN5G(132, 0),         CHAN5G(136, 0),
 287         CHAN5G(140, 0),         CHAN5G(149, 0),
 288         CHAN5G(153, 0),         CHAN5G(157, 0),
 289         CHAN5G(161, 0),         CHAN5G(165, 0),
 290         CHAN5G(184, 0),         CHAN5G(188, 0),
 291         CHAN5G(192, 0),         CHAN5G(196, 0),
 292         CHAN5G(200, 0),         CHAN5G(204, 0),
 293         CHAN5G(208, 0),         CHAN5G(212, 0),
 294         CHAN5G(216, 0),
 295 };
 296 #undef CHAN5G
 297
 298 static struct ieee80211_supported_band b43_band_5GHz_nphy = {
 299         .band           = IEEE80211_BAND_5GHZ,
 300         .channels       = b43_5ghz_nphy_chantable,
 301         .n_channels     = ARRAY_SIZE(b43_5ghz_nphy_chantable),
 302         .bitrates       = b43_a_ratetable,
 303         .n_bitrates     = b43_a_ratetable_size,
 304 };
 305
 306 static struct ieee80211_supported_band b43_band_5GHz_aphy = {
 307         .band           = IEEE80211_BAND_5GHZ,
 308         .channels       = b43_5ghz_aphy_chantable,
 309         .n_channels     = ARRAY_SIZE(b43_5ghz_aphy_chantable),
 310         .bitrates       = b43_a_ratetable,
 311         .n_bitrates     = b43_a_ratetable_size,
 312 };
 313
 314 static struct ieee80211_supported_band b43_band_2GHz = {
 315         .band           = IEEE80211_BAND_2GHZ,
 316         .channels       = b43_2ghz_chantable,
 317         .n_channels     = ARRAY_SIZE(b43_2ghz_chantable),
 318         .bitrates       = b43_g_ratetable,
 319         .n_bitrates     = b43_g_ratetable_size,
 320 };
 321
 322 static void b43_wireless_core_exit(struct b43_wldev *dev);
 323 static int b43_wireless_core_init(struct b43_wldev *dev);
 324 static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev);
 325 static int b43_wireless_core_start(struct b43_wldev *dev);
 326 static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
 327                                     struct ieee80211_vif *vif,
 328                                     struct ieee80211_bss_conf *conf,
 329                                     u32 changed);
 330
 331 static int b43_ratelimit(struct b43_wl *wl)
 332 {
 333         if (!wl || !wl->current_dev)
 334                 return 1;
 335         if (b43_status(wl->current_dev) < B43_STAT_STARTED)
 336                 return 1;
 337         /* We are up and running.
 338          * Ratelimit the messages to avoid DoS over the net. */
 339         return net_ratelimit();
 340 }
 341
 342 void b43info(struct b43_wl *wl, const char *fmt, ...)
 343 {
 344         struct va_format vaf;
 345         va_list args;
 346
 347         if (b43_modparam_verbose < B43_VERBOSITY_INFO)
 348                 return;
 349         if (!b43_ratelimit(wl))
 350                 return;
 351
 352         va_start(args, fmt);
 353
 354         vaf.fmt = fmt;
 355         vaf.va = &args;
 356
 357         printk(KERN_INFO "b43-%s: %pV",
 358                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
 359
 360         va_end(args);
 361 }
 362
 363 void b43err(struct b43_wl *wl, const char *fmt, ...)
 364 {
 365         struct va_format vaf;
 366         va_list args;
 367
 368         if (b43_modparam_verbose < B43_VERBOSITY_ERROR)
 369                 return;
 370         if (!b43_ratelimit(wl))
 371                 return;
 372
 373         va_start(args, fmt);
 374
 375         vaf.fmt = fmt;
 376         vaf.va = &args;
 377
 378         printk(KERN_ERR "b43-%s ERROR: %pV",
 379                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
 380
 381         va_end(args);
 382 }
 383
 384 void b43warn(struct b43_wl *wl, const char *fmt, ...)
 385 {
 386         struct va_format vaf;
 387         va_list args;
 388
 389         if (b43_modparam_verbose < B43_VERBOSITY_WARN)
 390                 return;
 391         if (!b43_ratelimit(wl))
 392                 return;
 393
 394         va_start(args, fmt);
 395
 396         vaf.fmt = fmt;
 397         vaf.va = &args;
 398
 399         printk(KERN_WARNING "b43-%s warning: %pV",
 400                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
 401
 402         va_end(args);
 403 }
 404
 405 void b43dbg(struct b43_wl *wl, const char *fmt, ...)
 406 {
 407         struct va_format vaf;
 408         va_list args;
 409
 410         if (b43_modparam_verbose < B43_VERBOSITY_DEBUG)
 411                 return;
 412
 413         va_start(args, fmt);
 414
 415         vaf.fmt = fmt;
 416         vaf.va = &args;
 417
 418         printk(KERN_DEBUG "b43-%s debug: %pV",
 419                (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
 420
 421         va_end(args);
 422 }
 423
 424 static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val)
 425 {
 426         u32 macctl;
 427
 428         B43_WARN_ON(offset % 4 != 0);
 429
 430         macctl = b43_read32(dev, B43_MMIO_MACCTL);
 431         if (macctl & B43_MACCTL_BE)
 432                 val = swab32(val);
 433
 434         b43_write32(dev, B43_MMIO_RAM_CONTROL, offset);
 435         mmiowb();
 436         b43_write32(dev, B43_MMIO_RAM_DATA, val);
 437 }
 438
 439 static inline void b43_shm_control_word(struct b43_wldev *dev,
 440                                         u16 routing, u16 offset)
 441 {
 442         u32 control;
 443
 444         /* "offset" is the WORD offset. */
 445         control = routing;
 446         control <<= 16;
 447         control |= offset;
 448         b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
 449 }
 450
 451 u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
 452 {
 453         u32 ret;
 454
 455         if (routing == B43_SHM_SHARED) {
 456                 B43_WARN_ON(offset & 0x0001);
 457                 if (offset & 0x0003) {
 458                         /* Unaligned access */
 459                         b43_shm_control_word(dev, routing, offset >> 2);
 460                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 461                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 462                         ret |= ((u32)b43_read16(dev, B43_MMIO_SHM_DATA)) << 16;
 463
 464                         goto out;
 465                 }
 466                 offset >>= 2;
 467         }
 468         b43_shm_control_word(dev, routing, offset);
 469         ret = b43_read32(dev, B43_MMIO_SHM_DATA);
 470 out:
 471         return ret;
 472 }
 473
 474 u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
 475 {
 476         u16 ret;
 477
 478         if (routing == B43_SHM_SHARED) {
 479                 B43_WARN_ON(offset & 0x0001);
 480                 if (offset & 0x0003) {
 481                         /* Unaligned access */
 482                         b43_shm_control_word(dev, routing, offset >> 2);
 483                         ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED);
 484
 485                         goto out;
 486                 }
 487                 offset >>= 2;
 488         }
 489         b43_shm_control_word(dev, routing, offset);
 490         ret = b43_read16(dev, B43_MMIO_SHM_DATA);
 491 out:
 492         return ret;
 493 }
 494
 495 void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
 496 {
 497         if (routing == B43_SHM_SHARED) {
 498                 B43_WARN_ON(offset & 0x0001);
 499                 if (offset & 0x0003) {
 500                         /* Unaligned access */
 501                         b43_shm_control_word(dev, routing, offset >> 2);
 502                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED,
 503                                     value & 0xFFFF);
 504                         b43_shm_control_word(dev, routing, (offset >> 2) + 1);
 505                         b43_write16(dev, B43_MMIO_SHM_DATA,
 506                                     (value >> 16) & 0xFFFF);
 507                         return;
 508                 }
 509                 offset >>= 2;
 510         }
 511         b43_shm_control_word(dev, routing, offset);
 512         b43_write32(dev, B43_MMIO_SHM_DATA, value);
 513 }
 514
 515 void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
 516 {
 517         if (routing == B43_SHM_SHARED) {
 518                 B43_WARN_ON(offset & 0x0001);
 519                 if (offset & 0x0003) {
 520                         /* Unaligned access */
 521                         b43_shm_control_word(dev, routing, offset >> 2);
 522                         b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value);
 523                         return;
 524                 }
 525                 offset >>= 2;
 526         }
 527         b43_shm_control_word(dev, routing, offset);
 528         b43_write16(dev, B43_MMIO_SHM_DATA, value);
 529 }
 530
 531 /* Read HostFlags */
 532 u64 b43_hf_read(struct b43_wldev *dev)
 533 {
 534         u64 ret;
 535
 536         ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI);
 537         ret <<= 16;
 538         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI);
 539         ret <<= 16;
 540         ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO);
 541
 542         return ret;
 543 }
 544
 545 /* Write HostFlags */
 546 void b43_hf_write(struct b43_wldev *dev, u64 value)
 547 {
 548         u16 lo, mi, hi;
 549
 550         lo = (value & 0x00000000FFFFULL);
 551         mi = (value & 0x0000FFFF0000ULL) >> 16;
 552         hi = (value & 0xFFFF00000000ULL) >> 32;
 553         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO, lo);
 554         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFMI, mi);
 555         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
 556 }
 557
 558 /* Read the firmware capabilities bitmask (Opensource firmware only) */
 559 static u16 b43_fwcapa_read(struct b43_wldev *dev)
 560 {
 561         B43_WARN_ON(!dev->fw.opensource);
 562         return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA);
 563 }
 564
 565 void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
 566 {
 567         u32 low, high;
 568
 569         B43_WARN_ON(dev->dev->core_rev < 3);
 570
 571         /* The hardware guarantees us an atomic read, if we
 572          * read the low register first. */
 573         low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW);
 574         high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH);
 575
 576         *tsf = high;
 577         *tsf <<= 32;
 578         *tsf |= low;
 579 }
 580
 581 static void b43_time_lock(struct b43_wldev *dev)
 582 {
 583         b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_TBTTHOLD);
 584         /* Commit the write */
 585         b43_read32(dev, B43_MMIO_MACCTL);
 586 }
 587
 588 static void b43_time_unlock(struct b43_wldev *dev)
 589 {
 590         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_TBTTHOLD, 0);
 591         /* Commit the write */
 592         b43_read32(dev, B43_MMIO_MACCTL);
 593 }
 594
 595 static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf)
 596 {
 597         u32 low, high;
 598
 599         B43_WARN_ON(dev->dev->core_rev < 3);
 600
 601         low = tsf;
 602         high = (tsf >> 32);
 603         /* The hardware guarantees us an atomic write, if we
 604          * write the low register first. */
 605         b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, low);
 606         mmiowb();
 607         b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, high);
 608         mmiowb();
 609 }
 610
 611 void b43_tsf_write(struct b43_wldev *dev, u64 tsf)
 612 {
 613         b43_time_lock(dev);
 614         b43_tsf_write_locked(dev, tsf);
 615         b43_time_unlock(dev);
 616 }
 617
 618 static
 619 void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 *mac)
 620 {
 621         static const u8 zero_addr[ETH_ALEN] = { 0 };
 622         u16 data;
 623
 624         if (!mac)
 625                 mac = zero_addr;
 626
 627         offset |= 0x0020;
 628         b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset);
 629
 630         data = mac[0];
 631         data |= mac[1] << 8;
 632         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 633         data = mac[2];
 634         data |= mac[3] << 8;
 635         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 636         data = mac[4];
 637         data |= mac[5] << 8;
 638         b43_write16(dev, B43_MMIO_MACFILTER_DATA, data);
 639 }
 640
 641 static void b43_write_mac_bssid_templates(struct b43_wldev *dev)
 642 {
 643         const u8 *mac;
 644         const u8 *bssid;
 645         u8 mac_bssid[ETH_ALEN * 2];
 646         int i;
 647         u32 tmp;
 648
 649         bssid = dev->wl->bssid;
 650         mac = dev->wl->mac_addr;
 651
 652         b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid);
 653
 654         memcpy(mac_bssid, mac, ETH_ALEN);
 655         memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);
 656
 657         /* Write our MAC address and BSSID to template ram */
 658         for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) {
 659                 tmp = (u32) (mac_bssid[i + 0]);
 660                 tmp |= (u32) (mac_bssid[i + 1]) << 8;
 661                 tmp |= (u32) (mac_bssid[i + 2]) << 16;
 662                 tmp |= (u32) (mac_bssid[i + 3]) << 24;
 663                 b43_ram_write(dev, 0x20 + i, tmp);
 664         }
 665 }
 666
 667 static void b43_upload_card_macaddress(struct b43_wldev *dev)
 668 {
 669         b43_write_mac_bssid_templates(dev);
 670         b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr);
 671 }
 672
 673 static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
 674 {
 675         /* slot_time is in usec. */
 676         /* This test used to exit for all but a G PHY. */
 677         if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
 678                 return;
 679         b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time);
 680         /* Shared memory location 0x0010 is the slot time and should be
 681          * set to slot_time; however, this register is initially 0 and changing
 682          * the value adversely affects the transmit rate for BCM4311
 683          * devices. Until this behavior is unterstood, delete this step
 684          *
 685          * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
 686          */
 687 }
 688
 689 static void b43_short_slot_timing_enable(struct b43_wldev *dev)
 690 {
 691         b43_set_slot_time(dev, 9);
 692 }
 693
 694 static void b43_short_slot_timing_disable(struct b43_wldev *dev)
 695 {
 696         b43_set_slot_time(dev, 20);
 697 }
 698
 699 /* DummyTransmission function, as documented on
 700  * http://bcm-v4.sipsolutions.net/802.11/DummyTransmission
 701  */
 702 void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on)
 703 {
 704         struct b43_phy *phy = &dev->phy;
 705         unsigned int i, max_loop;
 706         u16 value;
 707         u32 buffer[5] = {
 708                 0x00000000,
 709                 0x00D40000,
 710                 0x00000000,
 711                 0x01000000,
 712                 0x00000000,
 713         };
 714
 715         if (ofdm) {
 716                 max_loop = 0x1E;
 717                 buffer[0] = 0x000201CC;
 718         } else {
 719                 max_loop = 0xFA;
 720                 buffer[0] = 0x000B846E;
 721         }
 722
 723         for (i = 0; i < 5; i++)
 724                 b43_ram_write(dev, i * 4, buffer[i]);
 725
 726         b43_write16(dev, B43_MMIO_XMTSEL, 0x0000);
 727
 728         if (dev->dev->core_rev < 11)
 729                 b43_write16(dev, B43_MMIO_WEPCTL, 0x0000);
 730         else
 731                 b43_write16(dev, B43_MMIO_WEPCTL, 0x0100);
 732
 733         value = (ofdm ? 0x41 : 0x40);
 734         b43_write16(dev, B43_MMIO_TXE0_PHYCTL, value);
 735         if (phy->type == B43_PHYTYPE_N || phy->type == B43_PHYTYPE_LP ||
 736             phy->type == B43_PHYTYPE_LCN)
 737                 b43_write16(dev, B43_MMIO_TXE0_PHYCTL1, 0x1A02);
 738
 739         b43_write16(dev, B43_MMIO_TXE0_WM_0, 0x0000);
 740         b43_write16(dev, B43_MMIO_TXE0_WM_1, 0x0000);
 741
 742         b43_write16(dev, B43_MMIO_XMTTPLATETXPTR, 0x0000);
 743         b43_write16(dev, B43_MMIO_XMTTXCNT, 0x0014);
 744         b43_write16(dev, B43_MMIO_XMTSEL, 0x0826);
 745         b43_write16(dev, B43_MMIO_TXE0_CTL, 0x0000);
 746
 747         if (!pa_on && phy->type == B43_PHYTYPE_N)
 748                 ; /*b43_nphy_pa_override(dev, false) */
 749
 750         switch (phy->type) {
 751         case B43_PHYTYPE_N:
 752         case B43_PHYTYPE_LCN:
 753                 b43_write16(dev, B43_MMIO_TXE0_AUX, 0x00D0);
 754                 break;
 755         case B43_PHYTYPE_LP:
 756                 b43_write16(dev, B43_MMIO_TXE0_AUX, 0x0050);
 757                 break;
 758         default:
 759                 b43_write16(dev, B43_MMIO_TXE0_AUX, 0x0030);
 760         }
 761         b43_read16(dev, B43_MMIO_TXE0_AUX);
 762
 763         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 764                 b43_radio_write16(dev, 0x0051, 0x0017);
 765         for (i = 0x00; i < max_loop; i++) {
 766                 value = b43_read16(dev, B43_MMIO_TXE0_STATUS);
 767                 if (value & 0x0080)
 768                         break;
 769                 udelay(10);
 770         }
 771         for (i = 0x00; i < 0x0A; i++) {
 772                 value = b43_read16(dev, B43_MMIO_TXE0_STATUS);
 773                 if (value & 0x0400)
 774                         break;
 775                 udelay(10);
 776         }
 777         for (i = 0x00; i < 0x19; i++) {
 778                 value = b43_read16(dev, B43_MMIO_IFSSTAT);
 779                 if (!(value & 0x0100))
 780                         break;
 781                 udelay(10);
 782         }
 783         if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
 784                 b43_radio_write16(dev, 0x0051, 0x0037);
 785 }
 786
 787 static void key_write(struct b43_wldev *dev,
 788                       u8 index, u8 algorithm, const u8 *key)
 789 {
 790         unsigned int i;
 791         u32 offset;
 792         u16 value;
 793         u16 kidx;
 794
 795         /* Key index/algo block */
 796         kidx = b43_kidx_to_fw(dev, index);
 797         value = ((kidx << 4) | algorithm);
 798         b43_shm_write16(dev, B43_SHM_SHARED,
 799                         B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value);
 800
 801         /* Write the key to the Key Table Pointer offset */
 802         offset = dev->ktp + (index * B43_SEC_KEYSIZE);
 803         for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
 804                 value = key[i];
 805                 value |= (u16) (key[i + 1]) << 8;
 806                 b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value);
 807         }
 808 }
 809
 810 static void keymac_write(struct b43_wldev *dev, u8 index, const u8 *addr)
 811 {
 812         u32 addrtmp[2] = { 0, 0, };
 813         u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
 814
 815         if (b43_new_kidx_api(dev))
 816                 pairwise_keys_start = B43_NR_GROUP_KEYS;
 817
 818         B43_WARN_ON(index < pairwise_keys_start);
 819         /* We have four default TX keys and possibly four default RX keys.
 820          * Physical mac 0 is mapped to physical key 4 or 8, depending
 821          * on the firmware version.
 822          * So we must adjust the index here.
 823          */
 824         index -= pairwise_keys_start;
 825         B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS);
 826
 827         if (addr) {
 828                 addrtmp[0] = addr[0];
 829                 addrtmp[0] |= ((u32) (addr[1]) << 8);
 830                 addrtmp[0] |= ((u32) (addr[2]) << 16);
 831                 addrtmp[0] |= ((u32) (addr[3]) << 24);
 832                 addrtmp[1] = addr[4];
 833                 addrtmp[1] |= ((u32) (addr[5]) << 8);
 834         }
 835
 836         /* Receive match transmitter address (RCMTA) mechanism */
 837         b43_shm_write32(dev, B43_SHM_RCMTA,
 838                         (index * 2) + 0, addrtmp[0]);
 839         b43_shm_write16(dev, B43_SHM_RCMTA,
 840                         (index * 2) + 1, addrtmp[1]);
 841 }
 842
 843 /* The ucode will use phase1 key with TEK key to decrypt rx packets.
 844  * When a packet is received, the iv32 is checked.
 845  * - if it doesn't the packet is returned without modification (and software
 846  *   decryption can be done). That's what happen when iv16 wrap.
 847  * - if it does, the rc4 key is computed, and decryption is tried.
 848  *   Either it will success and B43_RX_MAC_DEC is returned,
 849  *   either it fails and B43_RX_MAC_DEC|B43_RX_MAC_DECERR is returned
 850  *   and the packet is not usable (it got modified by the ucode).
 851  * So in order to never have B43_RX_MAC_DECERR, we should provide
 852  * a iv32 and phase1key that match. Because we drop packets in case of
 853  * B43_RX_MAC_DECERR, if we have a correct iv32 but a wrong phase1key, all
 854  * packets will be lost without higher layer knowing (ie no resync possible
 855  * until next wrap).
 856  *
 857  * NOTE : this should support 50 key like RCMTA because
 858  * (B43_SHM_SH_KEYIDXBLOCK - B43_SHM_SH_TKIPTSCTTAK)/14 = 50
 859  */
 860 static void rx_tkip_phase1_write(struct b43_wldev *dev, u8 index, u32 iv32,
 861                 u16 *phase1key)
 862 {
 863         unsigned int i;
 864         u32 offset;
 865         u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
 866
 867         if (!modparam_hwtkip)
 868                 return;
 869
 870         if (b43_new_kidx_api(dev))
 871                 pairwise_keys_start = B43_NR_GROUP_KEYS;
 872
 873         B43_WARN_ON(index < pairwise_keys_start);
 874         /* We have four default TX keys and possibly four default RX keys.
 875          * Physical mac 0 is mapped to physical key 4 or 8, depending
 876          * on the firmware version.
 877          * So we must adjust the index here.
 878          */
 879         index -= pairwise_keys_start;
 880         B43_WARN_ON(index >= B43_NR_PAIRWISE_KEYS);
 881
 882         if (b43_debug(dev, B43_DBG_KEYS)) {
 883                 b43dbg(dev->wl, "rx_tkip_phase1_write : idx 0x%x, iv32 0x%x\n",
 884                                 index, iv32);
 885         }
 886         /* Write the key to the  RX tkip shared mem */
 887         offset = B43_SHM_SH_TKIPTSCTTAK + index * (10 + 4);
 888         for (i = 0; i < 10; i += 2) {
 889                 b43_shm_write16(dev, B43_SHM_SHARED, offset + i,
 890                                 phase1key ? phase1key[i / 2] : 0);
 891         }
 892         b43_shm_write16(dev, B43_SHM_SHARED, offset + i, iv32);
 893         b43_shm_write16(dev, B43_SHM_SHARED, offset + i + 2, iv32 >> 16);
 894 }
 895
 896 static void b43_op_update_tkip_key(struct ieee80211_hw *hw,
 897                                    struct ieee80211_vif *vif,
 898                                    struct ieee80211_key_conf *keyconf,
 899                                    struct ieee80211_sta *sta,
 900                                    u32 iv32, u16 *phase1key)
 901 {
 902         struct b43_wl *wl = hw_to_b43_wl(hw);
 903         struct b43_wldev *dev;
 904         int index = keyconf->hw_key_idx;
 905
 906         if (B43_WARN_ON(!modparam_hwtkip))
 907                 return;
 908
 909         /* This is only called from the RX path through mac80211, where
 910          * our mutex is already locked. */
 911         B43_WARN_ON(!mutex_is_locked(&wl->mutex));
 912         dev = wl->current_dev;
 913         B43_WARN_ON(!dev || b43_status(dev) < B43_STAT_INITIALIZED);
 914
 915         keymac_write(dev, index, NULL); /* First zero out mac to avoid race */
 916
 917         rx_tkip_phase1_write(dev, index, iv32, phase1key);
 918         /* only pairwise TKIP keys are supported right now */
 919         if (WARN_ON(!sta))
 920                 return;
 921         keymac_write(dev, index, sta->addr);
 922 }
 923
 924 static void do_key_write(struct b43_wldev *dev,
 925                          u8 index, u8 algorithm,
 926                          const u8 *key, size_t key_len, const u8 *mac_addr)
 927 {
 928         u8 buf[B43_SEC_KEYSIZE] = { 0, };
 929         u8 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
 930
 931         if (b43_new_kidx_api(dev))
 932                 pairwise_keys_start = B43_NR_GROUP_KEYS;
 933
 934         B43_WARN_ON(index >= ARRAY_SIZE(dev->key));
 935         B43_WARN_ON(key_len > B43_SEC_KEYSIZE);
 936
 937         if (index >= pairwise_keys_start)
 938                 keymac_write(dev, index, NULL); /* First zero out mac. */
 939         if (algorithm == B43_SEC_ALGO_TKIP) {
 940                 /*
 941                  * We should provide an initial iv32, phase1key pair.
 942                  * We could start with iv32=0 and compute the corresponding
 943                  * phase1key, but this means calling ieee80211_get_tkip_key
 944                  * with a fake skb (or export other tkip function).
 945                  * Because we are lazy we hope iv32 won't start with
 946                  * 0xffffffff and let's b43_op_update_tkip_key provide a
 947                  * correct pair.
 948                  */
 949                 rx_tkip_phase1_write(dev, index, 0xffffffff, (u16*)buf);
 950         } else if (index >= pairwise_keys_start) /* clear it */
 951                 rx_tkip_phase1_write(dev, index, 0, NULL);
 952         if (key)
 953                 memcpy(buf, key, key_len);
 954         key_write(dev, index, algorithm, buf);
 955         if (index >= pairwise_keys_start)
 956                 keymac_write(dev, index, mac_addr);
 957
 958         dev->key[index].algorithm = algorithm;
 959 }
 960
 961 static int b43_key_write(struct b43_wldev *dev,
 962                          int index, u8 algorithm,
 963                          const u8 *key, size_t key_len,
 964                          const u8 *mac_addr,
 965                          struct ieee80211_key_conf *keyconf)
 966 {
 967         int i;
 968         int pairwise_keys_start;
 969
 970         /* For ALG_TKIP the key is encoded as a 256-bit (32 byte) data block:
 971          *      - Temporal Encryption Key (128 bits)
 972          *      - Temporal Authenticator Tx MIC Key (64 bits)
 973          *      - Temporal Authenticator Rx MIC Key (64 bits)
 974          *
 975          *      Hardware only store TEK
 976          */
 977         if (algorithm == B43_SEC_ALGO_TKIP && key_len == 32)
 978                 key_len = 16;
 979         if (key_len > B43_SEC_KEYSIZE)
 980                 return -EINVAL;
 981         for (i = 0; i < ARRAY_SIZE(dev->key); i++) {
 982                 /* Check that we don't already have this key. */
 983                 B43_WARN_ON(dev->key[i].keyconf == keyconf);
 984         }
 985         if (index < 0) {
 986                 /* Pairwise key. Get an empty slot for the key. */
 987                 if (b43_new_kidx_api(dev))
 988                         pairwise_keys_start = B43_NR_GROUP_KEYS;
 989                 else
 990                         pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
 991                 for (i = pairwise_keys_start;
 992                      i < pairwise_keys_start + B43_NR_PAIRWISE_KEYS;
 993                      i++) {
 994                         B43_WARN_ON(i >= ARRAY_SIZE(dev->key));
 995                         if (!dev->key[i].keyconf) {
 996                                 /* found empty */
 997                                 index = i;
 998                                 break;
 999                         }
1000                 }
1001                 if (index < 0) {
1002                         b43warn(dev->wl, "Out of hardware key memory\n");
1003                         return -ENOSPC;
1004                 }
1005         } else
1006                 B43_WARN_ON(index > 3);
1007
1008         do_key_write(dev, index, algorithm, key, key_len, mac_addr);
1009         if ((index <= 3) && !b43_new_kidx_api(dev)) {
1010                 /* Default RX key */
1011                 B43_WARN_ON(mac_addr);
1012                 do_key_write(dev, index + 4, algorithm, key, key_len, NULL);
1013         }
1014         keyconf->hw_key_idx = index;
1015         dev->key[index].keyconf = keyconf;
1016
1017         return 0;
1018 }
1019
1020 static int b43_key_clear(struct b43_wldev *dev, int index)
1021 {
1022         if (B43_WARN_ON((index < 0) || (index >= ARRAY_SIZE(dev->key))))
1023                 return -EINVAL;
1024         do_key_write(dev, index, B43_SEC_ALGO_NONE,
1025                      NULL, B43_SEC_KEYSIZE, NULL);
1026         if ((index <= 3) && !b43_new_kidx_api(dev)) {
1027                 do_key_write(dev, index + 4, B43_SEC_ALGO_NONE,
1028                              NULL, B43_SEC_KEYSIZE, NULL);
1029         }
1030         dev->key[index].keyconf = NULL;
1031
1032         return 0;
1033 }
1034
1035 static void b43_clear_keys(struct b43_wldev *dev)
1036 {
1037         int i, count;
1038
1039         if (b43_new_kidx_api(dev))
1040                 count = B43_NR_GROUP_KEYS + B43_NR_PAIRWISE_KEYS;
1041         else
1042                 count = B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS;
1043         for (i = 0; i < count; i++)
1044                 b43_key_clear(dev, i);
1045 }
1046
1047 static void b43_dump_keymemory(struct b43_wldev *dev)
1048 {
1049         unsigned int i, index, count, offset, pairwise_keys_start;
1050         u8 mac[ETH_ALEN];
1051         u16 algo;
1052         u32 rcmta0;
1053         u16 rcmta1;
1054         u64 hf;
1055         struct b43_key *key;
1056
1057         if (!b43_debug(dev, B43_DBG_KEYS))
1058                 return;
1059
1060         hf = b43_hf_read(dev);
1061         b43dbg(dev->wl, "Hardware key memory dump:  USEDEFKEYS=%u\n",
1062                !!(hf & B43_HF_USEDEFKEYS));
1063         if (b43_new_kidx_api(dev)) {
1064                 pairwise_keys_start = B43_NR_GROUP_KEYS;
1065                 count = B43_NR_GROUP_KEYS + B43_NR_PAIRWISE_KEYS;
1066         } else {
1067                 pairwise_keys_start = B43_NR_GROUP_KEYS * 2;
1068                 count = B43_NR_GROUP_KEYS * 2 + B43_NR_PAIRWISE_KEYS;
1069         }
1070         for (index = 0; index < count; index++) {
1071                 key = &(dev->key[index]);
1072                 printk(KERN_DEBUG "Key slot %02u: %s",
1073                        index, (key->keyconf == NULL) ? " " : "*");
1074                 offset = dev->ktp + (index * B43_SEC_KEYSIZE);
1075                 for (i = 0; i < B43_SEC_KEYSIZE; i += 2) {
1076                         u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i);
1077                         printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF));
1078                 }
1079
1080                 algo = b43_shm_read16(dev, B43_SHM_SHARED,
1081                                       B43_SHM_SH_KEYIDXBLOCK + (index * 2));
1082                 printk("   Algo: %04X/%02X", algo, key->algorithm);
1083
1084                 if (index >= pairwise_keys_start) {
1085                         if (key->algorithm == B43_SEC_ALGO_TKIP) {
1086                                 printk("   TKIP: ");
1087                                 offset = B43_SHM_SH_TKIPTSCTTAK + (index - 4) * (10 + 4);
1088                                 for (i = 0; i < 14; i += 2) {
1089                                         u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, offset + i);
1090                                         printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF));
1091                                 }
1092                         }
1093                         rcmta0 = b43_shm_read32(dev, B43_SHM_RCMTA,
1094                                                 ((index - pairwise_keys_start) * 2) + 0);
1095                         rcmta1 = b43_shm_read16(dev, B43_SHM_RCMTA,
1096                                                 ((index - pairwise_keys_start) * 2) + 1);
1097                         *((__le32 *)(&mac[0])) = cpu_to_le32(rcmta0);
1098                         *((__le16 *)(&mac[4])) = cpu_to_le16(rcmta1);
1099                         printk("   MAC: %pM", mac);
1100                 } else
1101                         printk("   DEFAULT KEY");
1102                 printk("\n");
1103         }
1104 }
1105
1106 void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
1107 {
1108         u32 macctl;
1109         u16 ucstat;
1110         bool hwps;
1111         bool awake;
1112         int i;
1113
1114         B43_WARN_ON((ps_flags & B43_PS_ENABLED) &&
1115                     (ps_flags & B43_PS_DISABLED));
1116         B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP));
1117
1118         if (ps_flags & B43_PS_ENABLED) {
1119                 hwps = true;
1120         } else if (ps_flags & B43_PS_DISABLED) {
1121                 hwps = false;
1122         } else {
1123                 //TODO: If powersave is not off and FIXME is not set and we are not in adhoc
1124                 //      and thus is not an AP and we are associated, set bit 25
1125         }
1126         if (ps_flags & B43_PS_AWAKE) {
1127                 awake = true;
1128         } else if (ps_flags & B43_PS_ASLEEP) {
1129                 awake = false;
1130         } else {
1131                 //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME,
1132                 //      or we are associated, or FIXME, or the latest PS-Poll packet sent was
1133                 //      successful, set bit26
1134         }
1135
1136 /* FIXME: For now we force awake-on and hwps-off */
1137         hwps = false;
1138         awake = true;
1139
1140         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1141         if (hwps)
1142                 macctl |= B43_MACCTL_HWPS;
1143         else
1144                 macctl &= ~B43_MACCTL_HWPS;
1145         if (awake)
1146                 macctl |= B43_MACCTL_AWAKE;
1147         else
1148                 macctl &= ~B43_MACCTL_AWAKE;
1149         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1150         /* Commit write */
1151         b43_read32(dev, B43_MMIO_MACCTL);
1152         if (awake && dev->dev->core_rev >= 5) {
1153                 /* Wait for the microcode to wake up. */
1154                 for (i = 0; i < 100; i++) {
1155                         ucstat = b43_shm_read16(dev, B43_SHM_SHARED,
1156                                                 B43_SHM_SH_UCODESTAT);
1157                         if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP)
1158                                 break;
1159                         udelay(10);
1160                 }
1161         }
1162 }
1163
1164 #ifdef CONFIG_B43_BCMA
1165 static void b43_bcma_phy_reset(struct b43_wldev *dev)
1166 {
1167         u32 flags;
1168
1169         /* Put PHY into reset */
1170         flags = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
1171         flags |= B43_BCMA_IOCTL_PHY_RESET;
1172         flags |= B43_BCMA_IOCTL_PHY_BW_20MHZ; /* Make 20 MHz def */
1173         bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, flags);
1174         udelay(2);
1175
1176         /* Take PHY out of reset */
1177         flags = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
1178         flags &= ~B43_BCMA_IOCTL_PHY_RESET;
1179         flags |= BCMA_IOCTL_FGC;
1180         bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, flags);
1181         udelay(1);
1182
1183         /* Do not force clock anymore */
1184         flags = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
1185         flags &= ~BCMA_IOCTL_FGC;
1186         bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, flags);
1187         udelay(1);
1188 }
1189
1190 static void b43_bcma_wireless_core_reset(struct b43_wldev *dev, bool gmode)
1191 {
1192         b43_device_enable(dev, B43_BCMA_IOCTL_PHY_CLKEN);
1193         bcma_core_set_clockmode(dev->dev->bdev, BCMA_CLKMODE_FAST);
1194         b43_bcma_phy_reset(dev);
1195         bcma_core_pll_ctl(dev->dev->bdev, 0x300, 0x3000000, true);
1196 }
1197 #endif
1198
1199 static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode)
1200 {
1201         struct ssb_device *sdev = dev->dev->sdev;
1202         u32 tmslow;
1203         u32 flags = 0;
1204
1205         if (gmode)
1206                 flags |= B43_TMSLOW_GMODE;
1207         flags |= B43_TMSLOW_PHYCLKEN;
1208         flags |= B43_TMSLOW_PHYRESET;
1209         if (dev->phy.type == B43_PHYTYPE_N)
1210                 flags |= B43_TMSLOW_PHY_BANDWIDTH_20MHZ; /* Make 20 MHz def */
1211         b43_device_enable(dev, flags);
1212         msleep(2);              /* Wait for the PLL to turn on. */
1213
1214         /* Now take the PHY out of Reset again */
1215         tmslow = ssb_read32(sdev, SSB_TMSLOW);
1216         tmslow |= SSB_TMSLOW_FGC;
1217         tmslow &= ~B43_TMSLOW_PHYRESET;
1218         ssb_write32(sdev, SSB_TMSLOW, tmslow);
1219         ssb_read32(sdev, SSB_TMSLOW);   /* flush */
1220         msleep(1);
1221         tmslow &= ~SSB_TMSLOW_FGC;
1222         ssb_write32(sdev, SSB_TMSLOW, tmslow);
1223         ssb_read32(sdev, SSB_TMSLOW);   /* flush */
1224         msleep(1);
1225 }
1226
1227 void b43_wireless_core_reset(struct b43_wldev *dev, bool gmode)
1228 {
1229         u32 macctl;
1230
1231         switch (dev->dev->bus_type) {
1232 #ifdef CONFIG_B43_BCMA
1233         case B43_BUS_BCMA:
1234                 b43_bcma_wireless_core_reset(dev, gmode);
1235                 break;
1236 #endif
1237 #ifdef CONFIG_B43_SSB
1238         case B43_BUS_SSB:
1239                 b43_ssb_wireless_core_reset(dev, gmode);
1240                 break;
1241 #endif
1242         }
1243
1244         /* Turn Analog ON, but only if we already know the PHY-type.
1245          * This protects against very early setup where we don't know the
1246          * PHY-type, yet. wireless_core_reset will be called once again later,
1247          * when we know the PHY-type. */
1248         if (dev->phy.ops)
1249                 dev->phy.ops->switch_analog(dev, 1);
1250
1251         macctl = b43_read32(dev, B43_MMIO_MACCTL);
1252         macctl &= ~B43_MACCTL_GMODE;
1253         if (gmode)
1254                 macctl |= B43_MACCTL_GMODE;
1255         macctl |= B43_MACCTL_IHR_ENABLED;
1256         b43_write32(dev, B43_MMIO_MACCTL, macctl);
1257 }
1258
1259 static void handle_irq_transmit_status(struct b43_wldev *dev)
1260 {
1261         u32 v0, v1;
1262         u16 tmp;
1263         struct b43_txstatus stat;
1264
1265         while (1) {
1266                 v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0);
1267                 if (!(v0 & 0x00000001))
1268                         break;
1269                 v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1);
1270
1271                 stat.cookie = (v0 >> 16);
1272                 stat.seq = (v1 & 0x0000FFFF);
1273                 stat.phy_stat = ((v1 & 0x00FF0000) >> 16);
1274                 tmp = (v0 & 0x0000FFFF);
1275                 stat.frame_count = ((tmp & 0xF000) >> 12);
1276                 stat.rts_count = ((tmp & 0x0F00) >> 8);
1277                 stat.supp_reason = ((tmp & 0x001C) >> 2);
1278                 stat.pm_indicated = !!(tmp & 0x0080);
1279                 stat.intermediate = !!(tmp & 0x0040);
1280                 stat.for_ampdu = !!(tmp & 0x0020);
1281                 stat.acked = !!(tmp & 0x0002);
1282
1283                 b43_handle_txstatus(dev, &stat);
1284         }
1285 }
1286
1287 static void drain_txstatus_queue(struct b43_wldev *dev)
1288 {
1289         u32 dummy;
1290
1291         if (dev->dev->core_rev < 5)
1292                 return;
1293         /* Read all entries from the microcode TXstatus FIFO
1294          * and throw them away.
1295          */
1296         while (1) {
1297                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0);
1298                 if (!(dummy & 0x00000001))
1299                         break;
1300                 dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1);
1301         }
1302 }
1303
1304 static u32 b43_jssi_read(struct b43_wldev *dev)
1305 {
1306         u32 val = 0;
1307
1308         val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A);
1309         val <<= 16;
1310         val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088);
1311
1312         return val;
1313 }
1314
1315 static void b43_jssi_write(struct b43_wldev *dev, u32 jssi)
1316 {
1317         b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF));
1318         b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16);
1319 }
1320
1321 static void b43_generate_noise_sample(struct b43_wldev *dev)
1322 {
1323         b43_jssi_write(dev, 0x7F7F7F7F);
1324         b43_write32(dev, B43_MMIO_MACCMD,
1325                     b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
1326 }
1327
1328 static void b43_calculate_link_quality(struct b43_wldev *dev)
1329 {
1330         /* Top half of Link Quality calculation. */
1331
1332         if (dev->phy.type != B43_PHYTYPE_G)
1333                 return;
1334         if (dev->noisecalc.calculation_running)
1335                 return;
1336         dev->noisecalc.calculation_running = true;
1337         dev->noisecalc.nr_samples = 0;
1338
1339         b43_generate_noise_sample(dev);
1340 }
1341
1342 static void handle_irq_noise(struct b43_wldev *dev)
1343 {
1344         struct b43_phy_g *phy = dev->phy.g;
1345         u16 tmp;
1346         u8 noise[4];
1347         u8 i, j;
1348         s32 average;
1349
1350         /* Bottom half of Link Quality calculation. */
1351
1352         if (dev->phy.type != B43_PHYTYPE_G)
1353                 return;
1354
1355         /* Possible race condition: It might be possible that the user
1356          * changed to a different channel in the meantime since we
1357          * started the calculation. We ignore that fact, since it's
1358          * not really that much of a problem. The background noise is
1359          * an estimation only anyway. Slightly wrong results will get damped
1360          * by the averaging of the 8 sample rounds. Additionally the
1361          * value is shortlived. So it will be replaced by the next noise
1362          * calculation round soon. */
1363
1364         B43_WARN_ON(!dev->noisecalc.calculation_running);
1365         *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
1366         if (noise[0] == 0x7F || noise[1] == 0x7F ||
1367             noise[2] == 0x7F || noise[3] == 0x7F)
1368                 goto generate_new;
1369
1370         /* Get the noise samples. */
1371         B43_WARN_ON(dev->noisecalc.nr_samples >= 8);
1372         i = dev->noisecalc.nr_samples;
1373         noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1374         noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1375         noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1376         noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
1377         dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
1378         dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
1379         dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
1380         dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]];
1381         dev->noisecalc.nr_samples++;
1382         if (dev->noisecalc.nr_samples == 8) {
1383                 /* Calculate the Link Quality by the noise samples. */
1384                 average = 0;
1385                 for (i = 0; i < 8; i++) {
1386                         for (j = 0; j < 4; j++)
1387                                 average += dev->noisecalc.samples[i][j];
1388                 }
1389                 average /= (8 * 4);
1390                 average *= 125;
1391                 average += 64;
1392                 average /= 128;
1393                 tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C);
1394                 tmp = (tmp / 128) & 0x1F;
1395                 if (tmp >= 8)
1396                         average += 2;
1397                 else
1398                         average -= 25;
1399                 if (tmp == 8)
1400                         average -= 72;
1401                 else
1402                         average -= 48;
1403
1404                 dev->stats.link_noise = average;
1405                 dev->noisecalc.calculation_running = false;
1406                 return;
1407         }
1408 generate_new:
1409         b43_generate_noise_sample(dev);
1410 }
1411
1412 static void handle_irq_tbtt_indication(struct b43_wldev *dev)
1413 {
1414         if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) {
1415                 ///TODO: PS TBTT
1416         } else {
1417                 if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
1418                         b43_power_saving_ctl_bits(dev, 0);
1419         }
1420         if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC))
1421                 dev->dfq_valid = true;
1422 }
1423
1424 static void handle_irq_atim_end(struct b43_wldev *dev)
1425 {
1426         if (dev->dfq_valid) {
1427                 b43_write32(dev, B43_MMIO_MACCMD,
1428                             b43_read32(dev, B43_MMIO_MACCMD)
1429                             | B43_MACCMD_DFQ_VALID);
1430                 dev->dfq_valid = false;
1431         }
1432 }
1433
1434 static void handle_irq_pmq(struct b43_wldev *dev)
1435 {
1436         u32 tmp;
1437
1438         //TODO: AP mode.
1439
1440         while (1) {
1441                 tmp = b43_read32(dev, B43_MMIO_PS_STATUS);
1442                 if (!(tmp & 0x00000008))
1443                         break;
1444         }
1445         /* 16bit write is odd, but correct. */
1446         b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002);
1447 }
1448
1449 static void b43_write_template_common(struct b43_wldev *dev,
1450                                       const u8 *data, u16 size,
1451                                       u16 ram_offset,
1452                                       u16 shm_size_offset, u8 rate)
1453 {
1454         u32 i, tmp;
1455         struct b43_plcp_hdr4 plcp;
1456
1457         plcp.data = 0;
1458         b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
1459         b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data));
1460         ram_offset += sizeof(u32);
1461         /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet.
1462          * So leave the first two bytes of the next write blank.
1463          */
1464         tmp = (u32) (data[0]) << 16;
1465         tmp |= (u32) (data[1]) << 24;
1466         b43_ram_write(dev, ram_offset, tmp);
1467         ram_offset += sizeof(u32);
1468         for (i = 2; i < size; i += sizeof(u32)) {
1469                 tmp = (u32) (data[i + 0]);
1470                 if (i + 1 < size)
1471                         tmp |= (u32) (data[i + 1]) << 8;
1472                 if (i + 2 < size)
1473                         tmp |= (u32) (data[i + 2]) << 16;
1474                 if (i + 3 < size)
1475                         tmp |= (u32) (data[i + 3]) << 24;
1476                 b43_ram_write(dev, ram_offset + i - 2, tmp);
1477         }
1478         b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset,
1479                         size + sizeof(struct b43_plcp_hdr6));
1480 }
1481
1482 /* Check if the use of the antenna that ieee80211 told us to
1483  * use is possible. This will fall back to DEFAULT.
1484  * "antenna_nr" is the antenna identifier we got from ieee80211. */
1485 u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
1486                                   u8 antenna_nr)
1487 {
1488         u8 antenna_mask;
1489
1490         if (antenna_nr == 0) {
1491                 /* Zero means "use default antenna". That's always OK. */
1492                 return 0;
1493         }
1494
1495         /* Get the mask of available antennas. */
1496         if (dev->phy.gmode)
1497                 antenna_mask = dev->dev->bus_sprom->ant_available_bg;
1498         else
1499                 antenna_mask = dev->dev->bus_sprom->ant_available_a;
1500
1501         if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
1502                 /* This antenna is not available. Fall back to default. */
1503                 return 0;
1504         }
1505
1506         return antenna_nr;
1507 }
1508
1509 /* Convert a b43 antenna number value to the PHY TX control value. */
1510 static u16 b43_antenna_to_phyctl(int antenna)
1511 {
1512         switch (antenna) {
1513         case B43_ANTENNA0:
1514                 return B43_TXH_PHY_ANT0;
1515         case B43_ANTENNA1:
1516                 return B43_TXH_PHY_ANT1;
1517         case B43_ANTENNA2:
1518                 return B43_TXH_PHY_ANT2;
1519         case B43_ANTENNA3:
1520                 return B43_TXH_PHY_ANT3;
1521         case B43_ANTENNA_AUTO0:
1522         case B43_ANTENNA_AUTO1:
1523                 return B43_TXH_PHY_ANT01AUTO;
1524         }
1525         B43_WARN_ON(1);
1526         return 0;
1527 }
1528
1529 static void b43_write_beacon_template(struct b43_wldev *dev,
1530                                       u16 ram_offset,
1531                                       u16 shm_size_offset)
1532 {
1533         unsigned int i, len, variable_len;
1534         const struct ieee80211_mgmt *bcn;
1535         const u8 *ie;
1536         bool tim_found = false;
1537         unsigned int rate;
1538         u16 ctl;
1539         int antenna;
1540         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
1541
1542         bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
1543         len = min((size_t) dev->wl->current_beacon->len,
1544                   0x200 - sizeof(struct b43_plcp_hdr6));
1545         rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
1546
1547         b43_write_template_common(dev, (const u8 *)bcn,
1548                                   len, ram_offset, shm_size_offset, rate);
1549
1550         /* Write the PHY TX control parameters. */
1551         antenna = B43_ANTENNA_DEFAULT;
1552         antenna = b43_antenna_to_phyctl(antenna);
1553         ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
1554         /* We can't send beacons with short preamble. Would get PHY errors. */
1555         ctl &= ~B43_TXH_PHY_SHORTPRMBL;
1556         ctl &= ~B43_TXH_PHY_ANT;
1557         ctl &= ~B43_TXH_PHY_ENC;
1558         ctl |= antenna;
1559         if (b43_is_cck_rate(rate))
1560                 ctl |= B43_TXH_PHY_ENC_CCK;
1561         else
1562                 ctl |= B43_TXH_PHY_ENC_OFDM;
1563         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);
1564
1565         /* Find the position of the TIM and the DTIM_period value
1566          * and write them to SHM. */
1567         ie = bcn->u.beacon.variable;
1568         variable_len = len - offsetof(struct ieee80211_mgmt, u.beacon.variable);
1569         for (i = 0; i < variable_len - 2; ) {
1570                 uint8_t ie_id, ie_len;
1571
1572                 ie_id = ie[i];
1573                 ie_len = ie[i + 1];
1574                 if (ie_id == 5) {
1575                         u16 tim_position;
1576                         u16 dtim_period;
1577                         /* This is the TIM Information Element */
1578
1579                         /* Check whether the ie_len is in the beacon data range. */
1580                         if (variable_len < ie_len + 2 + i)
1581                                 break;
1582                         /* A valid TIM is at least 4 bytes long. */
1583                         if (ie_len < 4)
1584                                 break;
1585                         tim_found = true;
1586
1587                         tim_position = sizeof(struct b43_plcp_hdr6);
1588                         tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable);
1589                         tim_position += i;
1590
1591                         dtim_period = ie[i + 3];
1592
1593                         b43_shm_write16(dev, B43_SHM_SHARED,
1594                                         B43_SHM_SH_TIMBPOS, tim_position);
1595                         b43_shm_write16(dev, B43_SHM_SHARED,
1596                                         B43_SHM_SH_DTIMPER, dtim_period);
1597                         break;
1598                 }
1599                 i += ie_len + 2;
1600         }
1601         if (!tim_found) {
1602                 /*
1603                  * If ucode wants to modify TIM do it behind the beacon, this
1604                  * will happen, for example, when doing mesh networking.
1605                  */
1606                 b43_shm_write16(dev, B43_SHM_SHARED,
1607                                 B43_SHM_SH_TIMBPOS,
1608                                 len + sizeof(struct b43_plcp_hdr6));
1609                 b43_shm_write16(dev, B43_SHM_SHARED,
1610                                 B43_SHM_SH_DTIMPER, 0);
1611         }
1612         b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset);
1613 }
1614
1615 static void b43_upload_beacon0(struct b43_wldev *dev)
1616 {
1617         struct b43_wl *wl = dev->wl;
1618
1619         if (wl->beacon0_uploaded)
1620                 return;
1621         b43_write_beacon_template(dev, 0x68, 0x18);
1622         wl->beacon0_uploaded = true;
1623 }
1624
1625 static void b43_upload_beacon1(struct b43_wldev *dev)
1626 {
1627         struct b43_wl *wl = dev->wl;
1628
1629         if (wl->beacon1_uploaded)
1630                 return;
1631         b43_write_beacon_template(dev, 0x468, 0x1A);
1632         wl->beacon1_uploaded = true;
1633 }
1634
1635 static void handle_irq_beacon(struct b43_wldev *dev)
1636 {
1637         struct b43_wl *wl = dev->wl;
1638         u32 cmd, beacon0_valid, beacon1_valid;
1639
1640         if (!b43_is_mode(wl, NL80211_IFTYPE_AP) &&
1641             !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) &&
1642             !b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
1643                 return;
1644
1645         /* This is the bottom half of the asynchronous beacon update. */
1646
1647         /* Ignore interrupt in the future. */
1648         dev->irq_mask &= ~B43_IRQ_BEACON;
1649
1650         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1651         beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
1652         beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID);
1653
1654         /* Schedule interrupt manually, if busy. */
1655         if (beacon0_valid && beacon1_valid) {
1656                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON);
1657                 dev->irq_mask |= B43_IRQ_BEACON;
1658                 return;
1659         }
1660
1661         if (unlikely(wl->beacon_templates_virgin)) {
1662                 /* We never uploaded a beacon before.
1663                  * Upload both templates now, but only mark one valid. */
1664                 wl->beacon_templates_virgin = false;
1665                 b43_upload_beacon0(dev);
1666                 b43_upload_beacon1(dev);
1667                 cmd = b43_read32(dev, B43_MMIO_MACCMD);
1668                 cmd |= B43_MACCMD_BEACON0_VALID;
1669                 b43_write32(dev, B43_MMIO_MACCMD, cmd);
1670         } else {
1671                 if (!beacon0_valid) {
1672                         b43_upload_beacon0(dev);
1673                         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1674                         cmd |= B43_MACCMD_BEACON0_VALID;
1675                         b43_write32(dev, B43_MMIO_MACCMD, cmd);
1676                 } else if (!beacon1_valid) {
1677                         b43_upload_beacon1(dev);
1678                         cmd = b43_read32(dev, B43_MMIO_MACCMD);
1679                         cmd |= B43_MACCMD_BEACON1_VALID;
1680                         b43_write32(dev, B43_MMIO_MACCMD, cmd);
1681                 }
1682         }
1683 }
1684
1685 static void b43_do_beacon_update_trigger_work(struct b43_wldev *dev)
1686 {
1687         u32 old_irq_mask = dev->irq_mask;
1688
1689         /* update beacon right away or defer to irq */
1690         handle_irq_beacon(dev);
1691         if (old_irq_mask != dev->irq_mask) {
1692                 /* The handler updated the IRQ mask. */
1693                 B43_WARN_ON(!dev->irq_mask);
1694                 if (b43_read32(dev, B43_MMIO_GEN_IRQ_MASK)) {
1695                         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
1696                 } else {
1697                         /* Device interrupts are currently disabled. That means
1698                          * we just ran the hardirq handler and scheduled the
1699                          * IRQ thread. The thread will write the IRQ mask when
1700                          * it finished, so there's nothing to do here. Writing
1701                          * the mask _here_ would incorrectly re-enable IRQs. */
1702                 }
1703         }
1704 }
1705
1706 static void b43_beacon_update_trigger_work(struct work_struct *work)
1707 {
1708         struct b43_wl *wl = container_of(work, struct b43_wl,
1709                                          beacon_update_trigger);
1710         struct b43_wldev *dev;
1711
1712         mutex_lock(&wl->mutex);
1713         dev = wl->current_dev;
1714         if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
1715                 if (b43_bus_host_is_sdio(dev->dev)) {
1716                         /* wl->mutex is enough. */
1717                         b43_do_beacon_update_trigger_work(dev);
1718                         mmiowb();
1719                 } else {
1720                         spin_lock_irq(&wl->hardirq_lock);
1721                         b43_do_beacon_update_trigger_work(dev);
1722                         mmiowb();
1723                         spin_unlock_irq(&wl->hardirq_lock);
1724                 }
1725         }
1726         mutex_unlock(&wl->mutex);
1727 }
1728
1729 /* Asynchronously update the packet templates in template RAM.
1730  * Locking: Requires wl->mutex to be locked. */
1731 static void b43_update_templates(struct b43_wl *wl)
1732 {
1733         struct sk_buff *beacon;
1734
1735         /* This is the top half of the ansynchronous beacon update.
1736          * The bottom half is the beacon IRQ.
1737          * Beacon update must be asynchronous to avoid sending an
1738          * invalid beacon. This can happen for example, if the firmware
1739          * transmits a beacon while we are updating it. */
1740
1741         /* We could modify the existing beacon and set the aid bit in
1742          * the TIM field, but that would probably require resizing and
1743          * moving of data within the beacon template.
1744          * Simply request a new beacon and let mac80211 do the hard work. */
1745         beacon = ieee80211_beacon_get(wl->hw, wl->vif);
1746         if (unlikely(!beacon))
1747                 return;
1748
1749         if (wl->current_beacon)
1750                 dev_kfree_skb_any(wl->current_beacon);
1751         wl->current_beacon = beacon;
1752         wl->beacon0_uploaded = false;
1753         wl->beacon1_uploaded = false;
1754         ieee80211_queue_work(wl->hw, &wl->beacon_update_trigger);
1755 }
1756
1757 static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
1758 {
1759         b43_time_lock(dev);
1760         if (dev->dev->core_rev >= 3) {
1761                 b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16));
1762                 b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10));
1763         } else {
1764                 b43_write16(dev, 0x606, (beacon_int >> 6));
1765                 b43_write16(dev, 0x610, beacon_int);
1766         }
1767         b43_time_unlock(dev);
1768         b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
1769 }
1770
1771 static void b43_handle_firmware_panic(struct b43_wldev *dev)
1772 {
1773         u16 reason;
1774
1775         /* Read the register that contains the reason code for the panic. */
1776         reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_FWPANIC_REASON_REG);
1777         b43err(dev->wl, "Whoopsy, firmware panic! Reason: %u\n", reason);
1778
1779         switch (reason) {
1780         default:
1781                 b43dbg(dev->wl, "The panic reason is unknown.\n");
1782                 /* fallthrough */
1783         case B43_FWPANIC_DIE:
1784                 /* Do not restart the controller or firmware.
1785                  * The device is nonfunctional from now on.
1786                  * Restarting would result in this panic to trigger again,
1787                  * so we avoid that recursion. */
1788                 break;
1789         case B43_FWPANIC_RESTART:
1790                 b43_controller_restart(dev, "Microcode panic");
1791                 break;
1792         }
1793 }
1794
1795 static void handle_irq_ucode_debug(struct b43_wldev *dev)
1796 {
1797         unsigned int i, cnt;
1798         u16 reason, marker_id, marker_line;
1799         __le16 *buf;
1800
1801         /* The proprietary firmware doesn't have this IRQ. */
1802         if (!dev->fw.opensource)
1803                 return;
1804
1805         /* Read the register that contains the reason code for this IRQ. */
1806         reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_DEBUGIRQ_REASON_REG);
1807
1808         switch (reason) {
1809         case B43_DEBUGIRQ_PANIC:
1810                 b43_handle_firmware_panic(dev);
1811                 break;
1812         case B43_DEBUGIRQ_DUMP_SHM:
1813                 if (!B43_DEBUG)
1814                         break; /* Only with driver debugging enabled. */
1815                 buf = kmalloc(4096, GFP_ATOMIC);
1816                 if (!buf) {
1817                         b43dbg(dev->wl, "SHM-dump: Failed to allocate memory\n");
1818                         goto out;
1819                 }
1820                 for (i = 0; i < 4096; i += 2) {
1821                         u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, i);
1822                         buf[i / 2] = cpu_to_le16(tmp);
1823                 }
1824                 b43info(dev->wl, "Shared memory dump:\n");
1825                 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET,
1826                                16, 2, buf, 4096, 1);
1827                 kfree(buf);
1828                 break;
1829         case B43_DEBUGIRQ_DUMP_REGS:
1830                 if (!B43_DEBUG)
1831                         break; /* Only with driver debugging enabled. */
1832                 b43info(dev->wl, "Microcode register dump:\n");
1833                 for (i = 0, cnt = 0; i < 64; i++) {
1834                         u16 tmp = b43_shm_read16(dev, B43_SHM_SCRATCH, i);
1835                         if (cnt == 0)
1836                                 printk(KERN_INFO);
1837                         printk("r%02u: 0x%04X  ", i, tmp);
1838                         cnt++;
1839                         if (cnt == 6) {
1840                                 printk("\n");
1841                                 cnt = 0;
1842                         }
1843                 }
1844                 printk("\n");
1845                 break;
1846         case B43_DEBUGIRQ_MARKER:
1847                 if (!B43_DEBUG)
1848                         break; /* Only with driver debugging enabled. */
1849                 marker_id = b43_shm_read16(dev, B43_SHM_SCRATCH,
1850                                            B43_MARKER_ID_REG);
1851                 marker_line = b43_shm_read16(dev, B43_SHM_SCRATCH,
1852                                              B43_MARKER_LINE_REG);
1853                 b43info(dev->wl, "The firmware just executed the MARKER(%u) "
1854                         "at line number %u\n",
1855                         marker_id, marker_line);
1856                 break;
1857         default:
1858                 b43dbg(dev->wl, "Debug-IRQ triggered for unknown reason: %u\n",
1859                        reason);
1860         }
1861 out:
1862         /* Acknowledge the debug-IRQ, so the firmware can continue. */
1863         b43_shm_write16(dev, B43_SHM_SCRATCH,
1864                         B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK);
1865 }
1866
1867 static void b43_do_interrupt_thread(struct b43_wldev *dev)
1868 {
1869         u32 reason;
1870         u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
1871         u32 merged_dma_reason = 0;
1872         int i;
1873
1874         if (unlikely(b43_status(dev) != B43_STAT_STARTED))
1875                 return;
1876
1877         reason = dev->irq_reason;
1878         for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
1879                 dma_reason[i] = dev->dma_reason[i];
1880                 merged_dma_reason |= dma_reason[i];
1881         }
1882
1883         if (unlikely(reason & B43_IRQ_MAC_TXERR))
1884                 b43err(dev->wl, "MAC transmission error\n");
1885
1886         if (unlikely(reason & B43_IRQ_PHY_TXERR)) {
1887                 b43err(dev->wl, "PHY transmission error\n");
1888                 rmb();
1889                 if (unlikely(atomic_dec_and_test(&dev->phy.txerr_cnt))) {
1890                         atomic_set(&dev->phy.txerr_cnt,
1891                                    B43_PHY_TX_BADNESS_LIMIT);
1892                         b43err(dev->wl, "Too many PHY TX errors, "
1893                                         "restarting the controller\n");
1894                         b43_controller_restart(dev, "PHY TX errors");
1895                 }
1896         }
1897
1898         if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK |
1899                                           B43_DMAIRQ_NONFATALMASK))) {
1900                 if (merged_dma_reason & B43_DMAIRQ_FATALMASK) {
1901                         b43err(dev->wl, "Fatal DMA error: "
1902                                "0x%08X, 0x%08X, 0x%08X, "
1903                                "0x%08X, 0x%08X, 0x%08X\n",
1904                                dma_reason[0], dma_reason[1],
1905                                dma_reason[2], dma_reason[3],
1906                                dma_reason[4], dma_reason[5]);
1907                         b43err(dev->wl, "This device does not support DMA "
1908                                "on your system. It will now be switched to PIO.\n");
1909                         /* Fall back to PIO transfers if we get fatal DMA errors! */
1910                         dev->use_pio = true;
1911                         b43_controller_restart(dev, "DMA error");
1912                         return;
1913                 }
1914                 if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
1915                         b43err(dev->wl, "DMA error: "
1916                                "0x%08X, 0x%08X, 0x%08X, "
1917                                "0x%08X, 0x%08X, 0x%08X\n",
1918                                dma_reason[0], dma_reason[1],
1919                                dma_reason[2], dma_reason[3],
1920                                dma_reason[4], dma_reason[5]);
1921                 }
1922         }
1923
1924         if (unlikely(reason & B43_IRQ_UCODE_DEBUG))
1925                 handle_irq_ucode_debug(dev);
1926         if (reason & B43_IRQ_TBTT_INDI)
1927                 handle_irq_tbtt_indication(dev);
1928         if (reason & B43_IRQ_ATIM_END)
1929                 handle_irq_atim_end(dev);
1930         if (reason & B43_IRQ_BEACON)
1931                 handle_irq_beacon(dev);
1932         if (reason & B43_IRQ_PMQ)
1933                 handle_irq_pmq(dev);
1934         if (reason & B43_IRQ_TXFIFO_FLUSH_OK)
1935                 ;/* TODO */
1936         if (reason & B43_IRQ_NOISESAMPLE_OK)
1937                 handle_irq_noise(dev);
1938
1939         /* Check the DMA reason registers for received data. */
1940         if (dma_reason[0] & B43_DMAIRQ_RX_DONE) {
1941                 if (b43_using_pio_transfers(dev))
1942                         b43_pio_rx(dev->pio.rx_queue);
1943                 else
1944                         b43_dma_rx(dev->dma.rx_ring);
1945         }
1946         B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE);
1947         B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE);
1948         B43_WARN_ON(dma_reason[3] & B43_DMAIRQ_RX_DONE);
1949         B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE);
1950         B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE);
1951
1952         if (reason & B43_IRQ_TX_OK)
1953                 handle_irq_transmit_status(dev);
1954
1955         /* Re-enable interrupts on the device by restoring the current interrupt mask. */
1956         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
1957
1958 #if B43_DEBUG
1959         if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
1960                 dev->irq_count++;
1961                 for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
1962                         if (reason & (1 << i))
1963                                 dev->irq_bit_count[i]++;
1964                 }
1965         }
1966 #endif
1967 }
1968
1969 /* Interrupt thread handler. Handles device interrupts in thread context. */
1970 static irqreturn_t b43_interrupt_thread_handler(int irq, void *dev_id)
1971 {
1972         struct b43_wldev *dev = dev_id;
1973
1974         mutex_lock(&dev->wl->mutex);
1975         b43_do_interrupt_thread(dev);
1976         mmiowb();
1977         mutex_unlock(&dev->wl->mutex);
1978
1979         return IRQ_HANDLED;
1980 }
1981
1982 static irqreturn_t b43_do_interrupt(struct b43_wldev *dev)
1983 {
1984         u32 reason;
1985
1986         /* This code runs under wl->hardirq_lock, but _only_ on non-SDIO busses.
1987          * On SDIO, this runs under wl->mutex. */
1988
1989         reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
1990         if (reason == 0xffffffff)       /* shared IRQ */
1991                 return IRQ_NONE;
1992         reason &= dev->irq_mask;
1993         if (!reason)
1994                 return IRQ_NONE;
1995
1996         dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
1997             & 0x0001DC00;
1998         dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON)
1999             & 0x0000DC00;
2000         dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON)
2001             & 0x0000DC00;
2002         dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON)
2003             & 0x0001DC00;
2004         dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON)
2005             & 0x0000DC00;
2006 /* Unused ring
2007         dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON)
2008             & 0x0000DC00;
2009 */
2010
2011         /* ACK the interrupt. */
2012         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason);
2013         b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]);
2014         b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]);
2015         b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]);
2016         b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]);
2017         b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]);
2018 /* Unused ring
2019         b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]);
2020 */
2021
2022         /* Disable IRQs on the device. The IRQ thread handler will re-enable them. */
2023         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
2024         /* Save the reason bitmasks for the IRQ thread handler. */
2025         dev->irq_reason = reason;
2026
2027         return IRQ_WAKE_THREAD;
2028 }
2029
2030 /* Interrupt handler top-half. This runs with interrupts disabled. */
2031 static irqreturn_t b43_interrupt_handler(int irq, void *dev_id)
2032 {
2033         struct b43_wldev *dev = dev_id;
2034         irqreturn_t ret;
2035
2036         if (unlikely(b43_status(dev) < B43_STAT_STARTED))
2037                 return IRQ_NONE;
2038
2039         spin_lock(&dev->wl->hardirq_lock);
2040         ret = b43_do_interrupt(dev);
2041         mmiowb();
2042         spin_unlock(&dev->wl->hardirq_lock);
2043
2044         return ret;
2045 }
2046
2047 /* SDIO interrupt handler. This runs in process context. */
2048 static void b43_sdio_interrupt_handler(struct b43_wldev *dev)
2049 {
2050         struct b43_wl *wl = dev->wl;
2051         irqreturn_t ret;
2052
2053         mutex_lock(&wl->mutex);
2054
2055         ret = b43_do_interrupt(dev);
2056         if (ret == IRQ_WAKE_THREAD)
2057                 b43_do_interrupt_thread(dev);
2058
2059         mutex_unlock(&wl->mutex);
2060 }
2061
2062 void b43_do_release_fw(struct b43_firmware_file *fw)
2063 {
2064         release_firmware(fw->data);
2065         fw->data = NULL;
2066         fw->filename = NULL;
2067 }
2068
2069 static void b43_release_firmware(struct b43_wldev *dev)
2070 {
2071         b43_do_release_fw(&dev->fw.ucode);
2072         b43_do_release_fw(&dev->fw.pcm);
2073         b43_do_release_fw(&dev->fw.initvals);
2074         b43_do_release_fw(&dev->fw.initvals_band);
2075 }
2076
2077 static void b43_print_fw_helptext(struct b43_wl *wl, bool error)
2078 {
2079         const char text[] =
2080                 "You must go to " \
2081                 "http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware " \
2082                 "and download the correct firmware for this driver version. " \
2083                 "Please carefully read all instructions on this website.\n";
2084
2085         if (error)
2086                 b43err(wl, text);
2087         else
2088                 b43warn(wl, text);
2089 }
2090
2091 int b43_do_request_fw(struct b43_request_fw_context *ctx,
2092                       const char *name,
2093                       struct b43_firmware_file *fw)
2094 {
2095         const struct firmware *blob;
2096         struct b43_fw_header *hdr;
2097         u32 size;
2098         int err;
2099
2100         if (!name) {
2101                 /* Don't fetch anything. Free possibly cached firmware. */
2102                 /* FIXME: We should probably keep it anyway, to save some headache
2103                  * on suspend/resume with multiband devices. */
2104                 b43_do_release_fw(fw);
2105                 return 0;
2106         }
2107         if (fw->filename) {
2108                 if ((fw->type == ctx->req_type) &&
2109                     (strcmp(fw->filename, name) == 0))
2110                         return 0; /* Already have this fw. */
2111                 /* Free the cached firmware first. */
2112                 /* FIXME: We should probably do this later after we successfully
2113                  * got the new fw. This could reduce headache with multiband devices.
2114                  * We could also redesign this to cache the firmware for all possible
2115                  * bands all the time. */
2116                 b43_do_release_fw(fw);
2117         }
2118
2119         switch (ctx->req_type) {
2120         case B43_FWTYPE_PROPRIETARY:
2121                 snprintf(ctx->fwname, sizeof(ctx->fwname),
2122                          "b43%s/%s.fw",
2123                          modparam_fwpostfix, name);
2124                 break;
2125         case B43_FWTYPE_OPENSOURCE:
2126                 snprintf(ctx->fwname, sizeof(ctx->fwname),
2127                          "b43-open%s/%s.fw",
2128                          modparam_fwpostfix, name);
2129                 break;
2130         default:
2131                 B43_WARN_ON(1);
2132                 return -ENOSYS;
2133         }
2134         err = request_firmware(&blob, ctx->fwname, ctx->dev->dev->dev);
2135         if (err == -ENOENT) {
2136                 snprintf(ctx->errors[ctx->req_type],
2137                          sizeof(ctx->errors[ctx->req_type]),
2138                          "Firmware file \"%s\" not found\n", ctx->fwname);
2139                 return err;
2140         } else if (err) {
2141                 snprintf(ctx->errors[ctx->req_type],
2142                          sizeof(ctx->errors[ctx->req_type]),
2143                          "Firmware file \"%s\" request failed (err=%d)\n",
2144                          ctx->fwname, err);
2145                 return err;
2146         }
2147         if (blob->size < sizeof(struct b43_fw_header))
2148                 goto err_format;
2149         hdr = (struct b43_fw_header *)(blob->data);
2150         switch (hdr->type) {
2151         case B43_FW_TYPE_UCODE:
2152         case B43_FW_TYPE_PCM:
2153                 size = be32_to_cpu(hdr->size);
2154                 if (size != blob->size - sizeof(struct b43_fw_header))
2155                         goto err_format;
2156                 /* fallthrough */
2157         case B43_FW_TYPE_IV:
2158                 if (hdr->ver != 1)
2159                         goto err_format;
2160                 break;
2161         default:
2162                 goto err_format;
2163         }
2164
2165         fw->data = blob;
2166         fw->filename = name;
2167         fw->type = ctx->req_type;
2168
2169         return 0;
2170
2171 err_format:
2172         snprintf(ctx->errors[ctx->req_type],
2173                  sizeof(ctx->errors[ctx->req_type]),
2174                  "Firmware file \"%s\" format error.\n", ctx->fwname);
2175         release_firmware(blob);
2176
2177         return -EPROTO;
2178 }
2179
2180 static int b43_try_request_fw(struct b43_request_fw_context *ctx)
2181 {
2182         struct b43_wldev *dev = ctx->dev;
2183         struct b43_firmware *fw = &ctx->dev->fw;
2184         const u8 rev = ctx->dev->dev->core_rev;
2185         const char *filename;
2186         u32 tmshigh;
2187         int err;
2188
2189         /* Files for HT and LCN were found by trying one by one */
2190
2191         /* Get microcode */
2192         if ((rev >= 5) && (rev <= 10)) {
2193                 filename = "ucode5";
2194         } else if ((rev >= 11) && (rev <= 12)) {
2195                 filename = "ucode11";
2196         } else if (rev == 13) {
2197                 filename = "ucode13";
2198         } else if (rev == 14) {
2199                 filename = "ucode14";
2200         } else if (rev == 15) {
2201                 filename = "ucode15";
2202         } else {
2203                 switch (dev->phy.type) {
2204                 case B43_PHYTYPE_N:
2205                         if (rev >= 16)
2206                                 filename = "ucode16_mimo";
2207                         else
2208                                 goto err_no_ucode;
2209                         break;
2210                 case B43_PHYTYPE_HT:
2211                         if (rev == 29)
2212                                 filename = "ucode29_mimo";
2213                         else
2214                                 goto err_no_ucode;
2215                         break;
2216                 case B43_PHYTYPE_LCN:
2217                         if (rev == 24)
2218                                 filename = "ucode24_mimo";
2219                         else
2220                                 goto err_no_ucode;
2221                         break;
2222                 default:
2223                         goto err_no_ucode;
2224                 }
2225         }
2226         err = b43_do_request_fw(ctx, filename, &fw->ucode);
2227         if (err)
2228                 goto err_load;
2229
2230         /* Get PCM code */
2231         if ((rev >= 5) && (rev <= 10))
2232                 filename = "pcm5";
2233         else if (rev >= 11)
2234                 filename = NULL;
2235         else
2236                 goto err_no_pcm;
2237         fw->pcm_request_failed = false;
2238         err = b43_do_request_fw(ctx, filename, &fw->pcm);
2239         if (err == -ENOENT) {
2240                 /* We did not find a PCM file? Not fatal, but
2241                  * core rev <= 10 must do without hwcrypto then. */
2242                 fw->pcm_request_failed = true;
2243         } else if (err)
2244                 goto err_load;
2245
2246         /* Get initvals */
2247         switch (dev->phy.type) {
2248         case B43_PHYTYPE_A:
2249                 if ((rev >= 5) && (rev <= 10)) {
2250                         tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
2251                         if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
2252                                 filename = "a0g1initvals5";
2253                         else
2254                                 filename = "a0g0initvals5";
2255                 } else
2256                         goto err_no_initvals;
2257                 break;
2258         case B43_PHYTYPE_G:
2259                 if ((rev >= 5) && (rev <= 10))
2260                         filename = "b0g0initvals5";
2261                 else if (rev >= 13)
2262                         filename = "b0g0initvals13";
2263                 else
2264                         goto err_no_initvals;
2265                 break;
2266         case B43_PHYTYPE_N:
2267                 if (rev >= 16)
2268                         filename = "n0initvals16";
2269                 else if ((rev >= 11) && (rev <= 12))
2270                         filename = "n0initvals11";
2271                 else
2272                         goto err_no_initvals;
2273                 break;
2274         case B43_PHYTYPE_LP:
2275                 if (rev == 13)
2276                         filename = "lp0initvals13";
2277                 else if (rev == 14)
2278                         filename = "lp0initvals14";
2279                 else if (rev >= 15)
2280                         filename = "lp0initvals15";
2281                 else
2282                         goto err_no_initvals;
2283                 break;
2284         case B43_PHYTYPE_HT:
2285                 if (rev == 29)
2286                         filename = "ht0initvals29";
2287                 else
2288                         goto err_no_initvals;
2289                 break;
2290         case B43_PHYTYPE_LCN:
2291                 if (rev == 24)
2292                         filename = "lcn0initvals24";
2293                 else
2294                         goto err_no_initvals;
2295                 break;
2296         default:
2297                 goto err_no_initvals;
2298         }
2299         err = b43_do_request_fw(ctx, filename, &fw->initvals);
2300         if (err)
2301                 goto err_load;
2302
2303         /* Get bandswitch initvals */
2304         switch (dev->phy.type) {
2305         case B43_PHYTYPE_A:
2306                 if ((rev >= 5) && (rev <= 10)) {
2307                         tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
2308                         if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY)
2309                                 filename = "a0g1bsinitvals5";
2310                         else
2311                                 filename = "a0g0bsinitvals5";
2312                 } else if (rev >= 11)
2313                         filename = NULL;
2314                 else
2315                         goto err_no_initvals;
2316                 break;
2317         case B43_PHYTYPE_G:
2318                 if ((rev >= 5) && (rev <= 10))
2319                         filename = "b0g0bsinitvals5";
2320                 else if (rev >= 11)
2321                         filename = NULL;
2322                 else
2323                         goto err_no_initvals;
2324                 break;
2325         case B43_PHYTYPE_N:
2326                 if (rev >= 16)
2327                         filename = "n0bsinitvals16";
2328                 else if ((rev >= 11) && (rev <= 12))
2329                         filename = "n0bsinitvals11";
2330                 else
2331                         goto err_no_initvals;
2332                 break;
2333         case B43_PHYTYPE_LP:
2334                 if (rev == 13)
2335                         filename = "lp0bsinitvals13";
2336                 else if (rev == 14)
2337                         filename = "lp0bsinitvals14";
2338                 else if (rev >= 15)
2339                         filename = "lp0bsinitvals15";
2340                 else
2341                         goto err_no_initvals;
2342                 break;
2343         case B43_PHYTYPE_HT:
2344                 if (rev == 29)
2345                         filename = "ht0bsinitvals29";
2346                 else
2347                         goto err_no_initvals;
2348                 break;
2349         case B43_PHYTYPE_LCN:
2350                 if (rev == 24)
2351                         filename = "lcn0bsinitvals24";
2352                 else
2353                         goto err_no_initvals;
2354                 break;
2355         default:
2356                 goto err_no_initvals;
2357         }
2358         err = b43_do_request_fw(ctx, filename, &fw->initvals_band);
2359         if (err)
2360                 goto err_load;
2361
2362         return 0;
2363
2364 err_no_ucode:
2365         err = ctx->fatal_failure = -EOPNOTSUPP;
2366         b43err(dev->wl, "The driver does not know which firmware (ucode) "
2367                "is required for your device (wl-core rev %u)\n", rev);
2368         goto error;
2369
2370 err_no_pcm:
2371         err = ctx->fatal_failure = -EOPNOTSUPP;
2372         b43err(dev->wl, "The driver does not know which firmware (PCM) "
2373                "is required for your device (wl-core rev %u)\n", rev);
2374         goto error;
2375
2376 err_no_initvals:
2377         err = ctx->fatal_failure = -EOPNOTSUPP;
2378         b43err(dev->wl, "The driver does not know which firmware (initvals) "
2379                "is required for your device (wl-core rev %u)\n", rev);
2380         goto error;
2381
2382 err_load:
2383         /* We failed to load this firmware image. The error message
2384          * already is in ctx->errors. Return and let our caller decide
2385          * what to do. */
2386         goto error;
2387
2388 error:
2389         b43_release_firmware(dev);
2390         return err;
2391 }
2392
2393 static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl);
2394 static void b43_one_core_detach(struct b43_bus_dev *dev);
2395
2396 static void b43_request_firmware(struct work_struct *work)
2397 {
2398         struct b43_wl *wl = container_of(work,
2399                             struct b43_wl, firmware_load);
2400         struct b43_wldev *dev = wl->current_dev;
2401         struct b43_request_fw_context *ctx;
2402         unsigned int i;
2403         int err;
2404         const char *errmsg;
2405
2406         ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
2407         if (!ctx)
2408                 return;
2409         ctx->dev = dev;
2410
2411         ctx->req_type = B43_FWTYPE_PROPRIETARY;
2412         err = b43_try_request_fw(ctx);
2413         if (!err)
2414                 goto start_ieee80211; /* Successfully loaded it. */
2415         /* Was fw version known? */
2416         if (ctx->fatal_failure)
2417                 goto out;
2418
2419         /* proprietary fw not found, try open source */
2420         ctx->req_type = B43_FWTYPE_OPENSOURCE;
2421         err = b43_try_request_fw(ctx);
2422         if (!err)
2423                 goto start_ieee80211; /* Successfully loaded it. */
2424         if(ctx->fatal_failure)
2425                 goto out;
2426
2427         /* Could not find a usable firmware. Print the errors. */
2428         for (i = 0; i < B43_NR_FWTYPES; i++) {
2429                 errmsg = ctx->errors[i];
2430                 if (strlen(errmsg))
2431                         b43err(dev->wl, errmsg);
2432         }
2433         b43_print_fw_helptext(dev->wl, 1);
2434         goto out;
2435
2436 start_ieee80211:
2437         err = ieee80211_register_hw(wl->hw);
2438         if (err)
2439                 goto err_one_core_detach;
2440         b43_leds_register(wl->current_dev);
2441         goto out;
2442
2443 err_one_core_detach:
2444         b43_one_core_detach(dev->dev);
2445
2446 out:
2447         kfree(ctx);
2448 }
2449
2450 static int b43_upload_microcode(struct b43_wldev *dev)
2451 {
2452         struct wiphy *wiphy = dev->wl->hw->wiphy;
2453         const size_t hdr_len = sizeof(struct b43_fw_header);
2454         const __be32 *data;
2455         unsigned int i, len;
2456         u16 fwrev, fwpatch, fwdate, fwtime;
2457         u32 tmp, macctl;
2458         int err = 0;
2459
2460         /* Jump the microcode PSM to offset 0 */
2461         macctl = b43_read32(dev, B43_MMIO_MACCTL);
2462         B43_WARN_ON(macctl & B43_MACCTL_PSM_RUN);
2463         macctl |= B43_MACCTL_PSM_JMP0;
2464         b43_write32(dev, B43_MMIO_MACCTL, macctl);
2465         /* Zero out all microcode PSM registers and shared memory. */
2466         for (i = 0; i < 64; i++)
2467                 b43_shm_write16(dev, B43_SHM_SCRATCH, i, 0);
2468         for (i = 0; i < 4096; i += 2)
2469                 b43_shm_write16(dev, B43_SHM_SHARED, i, 0);
2470
2471         /* Upload Microcode. */
2472         data = (__be32 *) (dev->fw.ucode.data->data + hdr_len);
2473         len = (dev->fw.ucode.data->size - hdr_len) / sizeof(__be32);
2474         b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000);
2475         for (i = 0; i < len; i++) {
2476                 b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
2477                 udelay(10);
2478         }
2479
2480         if (dev->fw.pcm.data) {
2481                 /* Upload PCM data. */
2482                 data = (__be32 *) (dev->fw.pcm.data->data + hdr_len);
2483                 len = (dev->fw.pcm.data->size - hdr_len) / sizeof(__be32);
2484                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EA);
2485                 b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000);
2486                 /* No need for autoinc bit in SHM_HW */
2487                 b43_shm_control_word(dev, B43_SHM_HW, 0x01EB);
2488                 for (i = 0; i < len; i++) {
2489                         b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i]));
2490                         udelay(10);
2491                 }
2492         }
2493
2494         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL);
2495
2496         /* Start the microcode PSM */
2497         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PSM_JMP0,
2498                       B43_MACCTL_PSM_RUN);
2499
2500         /* Wait for the microcode to load and respond */
2501         i = 0;
2502         while (1) {
2503                 tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2504                 if (tmp == B43_IRQ_MAC_SUSPENDED)
2505                         break;
2506                 i++;
2507                 if (i >= 20) {
2508                         b43err(dev->wl, "Microcode not responding\n");
2509                         b43_print_fw_helptext(dev->wl, 1);
2510                         err = -ENODEV;
2511                         goto error;
2512                 }
2513                 msleep(50);
2514         }
2515         b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);       /* dummy read */
2516
2517         /* Get and check the revisions. */
2518         fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV);
2519         fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH);
2520         fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE);
2521         fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME);
2522
2523         if (fwrev <= 0x128) {
2524                 b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from "
2525                        "binary drivers older than version 4.x is unsupported. "
2526                        "You must upgrade your firmware files.\n");
2527                 b43_print_fw_helptext(dev->wl, 1);
2528                 err = -EOPNOTSUPP;
2529                 goto error;
2530         }
2531         dev->fw.rev = fwrev;
2532         dev->fw.patch = fwpatch;
2533         if (dev->fw.rev >= 598)
2534                 dev->fw.hdr_format = B43_FW_HDR_598;
2535         else if (dev->fw.rev >= 410)
2536                 dev->fw.hdr_format = B43_FW_HDR_410;
2537         else
2538                 dev->fw.hdr_format = B43_FW_HDR_351;
2539         dev->fw.opensource = (fwdate == 0xFFFF);
2540
2541         /* Default to use-all-queues. */
2542         dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues;
2543         dev->qos_enabled = !!modparam_qos;
2544         /* Default to firmware/hardware crypto acceleration. */
2545         dev->hwcrypto_enabled = true;
2546
2547         if (dev->fw.opensource) {
2548                 u16 fwcapa;
2549
2550                 /* Patchlevel info is encoded in the "time" field. */
2551                 dev->fw.patch = fwtime;
2552                 b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n",
2553                         dev->fw.rev, dev->fw.patch);
2554
2555                 fwcapa = b43_fwcapa_read(dev);
2556                 if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) {
2557                         b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n");
2558                         /* Disable hardware crypto and fall back to software crypto. */
2559                         dev->hwcrypto_enabled = false;
2560                 }
2561                 if (!(fwcapa & B43_FWCAPA_QOS)) {
2562                         b43info(dev->wl, "QoS not supported by firmware\n");
2563                         /* Disable QoS. Tweak hw->queues to 1. It will be restored before
2564                          * ieee80211_unregister to make sure the networking core can
2565                          * properly free possible resources. */
2566                         dev->wl->hw->queues = 1;
2567                         dev->qos_enabled = false;
2568                 }
2569         } else {
2570                 b43info(dev->wl, "Loading firmware version %u.%u "
2571                         "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
2572                         fwrev, fwpatch,
2573                         (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
2574                         (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
2575                 if (dev->fw.pcm_request_failed) {
2576                         b43warn(dev->wl, "No \"pcm5.fw\" firmware file found. "
2577                                 "Hardware accelerated cryptography is disabled.\n");
2578                         b43_print_fw_helptext(dev->wl, 0);
2579                 }
2580         }
2581
2582         snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u",
2583                         dev->fw.rev, dev->fw.patch);
2584         wiphy->hw_version = dev->dev->core_id;
2585
2586         if (dev->fw.hdr_format == B43_FW_HDR_351) {
2587                 /* We're over the deadline, but we keep support for old fw
2588                  * until it turns out to be in major conflict with something new. */
2589                 b43warn(dev->wl, "You are using an old firmware image. "
2590                         "Support for old firmware will be removed soon "
2591                         "(official deadline was July 2008).\n");
2592                 b43_print_fw_helptext(dev->wl, 0);
2593         }
2594
2595         return 0;
2596
2597 error:
2598         /* Stop the microcode PSM. */
2599         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PSM_RUN,
2600                       B43_MACCTL_PSM_JMP0);
2601
2602         return err;
2603 }
2604
2605 static int b43_write_initvals(struct b43_wldev *dev,
2606                               const struct b43_iv *ivals,
2607                               size_t count,
2608                               size_t array_size)
2609 {
2610         const struct b43_iv *iv;
2611         u16 offset;
2612         size_t i;
2613         bool bit32;
2614
2615         BUILD_BUG_ON(sizeof(struct b43_iv) != 6);
2616         iv = ivals;
2617         for (i = 0; i < count; i++) {
2618                 if (array_size < sizeof(iv->offset_size))
2619                         goto err_format;
2620                 array_size -= sizeof(iv->offset_size);
2621                 offset = be16_to_cpu(iv->offset_size);
2622                 bit32 = !!(offset & B43_IV_32BIT);
2623                 offset &= B43_IV_OFFSET_MASK;
2624                 if (offset >= 0x1000)
2625                         goto err_format;
2626                 if (bit32) {
2627                         u32 value;
2628
2629                         if (array_size < sizeof(iv->data.d32))
2630                                 goto err_format;
2631                         array_size -= sizeof(iv->data.d32);
2632
2633                         value = get_unaligned_be32(&iv->data.d32);
2634                         b43_write32(dev, offset, value);
2635
2636                         iv = (const struct b43_iv *)((const uint8_t *)iv +
2637                                                         sizeof(__be16) +
2638                                                         sizeof(__be32));
2639                 } else {
2640                         u16 value;
2641
2642                         if (array_size < sizeof(iv->data.d16))
2643                                 goto err_format;
2644                         array_size -= sizeof(iv->data.d16);
2645
2646                         value = be16_to_cpu(iv->data.d16);
2647                         b43_write16(dev, offset, value);
2648
2649                         iv = (const struct b43_iv *)((const uint8_t *)iv +
2650                                                         sizeof(__be16) +
2651                                                         sizeof(__be16));
2652                 }
2653         }
2654         if (array_size)
2655                 goto err_format;
2656
2657         return 0;
2658
2659 err_format:
2660         b43err(dev->wl, "Initial Values Firmware file-format error.\n");
2661         b43_print_fw_helptext(dev->wl, 1);
2662
2663         return -EPROTO;
2664 }
2665
2666 static int b43_upload_initvals(struct b43_wldev *dev)
2667 {
2668         const size_t hdr_len = sizeof(struct b43_fw_header);
2669         const struct b43_fw_header *hdr;
2670         struct b43_firmware *fw = &dev->fw;
2671         const struct b43_iv *ivals;
2672         size_t count;
2673         int err;
2674
2675         hdr = (const struct b43_fw_header *)(fw->initvals.data->data);
2676         ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len);
2677         count = be32_to_cpu(hdr->size);
2678         err = b43_write_initvals(dev, ivals, count,
2679                                  fw->initvals.data->size - hdr_len);
2680         if (err)
2681                 goto out;
2682         if (fw->initvals_band.data) {
2683                 hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data);
2684                 ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len);
2685                 count = be32_to_cpu(hdr->size);
2686                 err = b43_write_initvals(dev, ivals, count,
2687                                          fw->initvals_band.data->size - hdr_len);
2688                 if (err)
2689                         goto out;
2690         }
2691 out:
2692
2693         return err;
2694 }
2695
2696 /* Initialize the GPIOs
2697  * http://bcm-specs.sipsolutions.net/GPIO
2698  */
2699 static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev)
2700 {
2701         struct ssb_bus *bus = dev->dev->sdev->bus;
2702
2703 #ifdef CONFIG_SSB_DRIVER_PCICORE
2704         return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
2705 #else
2706         return bus->chipco.dev;
2707 #endif
2708 }
2709
2710 static int b43_gpio_init(struct b43_wldev *dev)
2711 {
2712         struct ssb_device *gpiodev;
2713         u32 mask, set;
2714
2715         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0);
2716         b43_maskset16(dev, B43_MMIO_GPIO_MASK, ~0, 0xF);
2717
2718         mask = 0x0000001F;
2719         set = 0x0000000F;
2720         if (dev->dev->chip_id == 0x4301) {
2721                 mask |= 0x0060;
2722                 set |= 0x0060;
2723         }
2724         if (dev->dev->chip_id == 0x5354)
2725                 set &= 0xff02;
2726         if (0 /* FIXME: conditional unknown */ ) {
2727                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2728                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2729                             | 0x0100);
2730                 mask |= 0x0180;
2731                 set |= 0x0180;
2732         }
2733         if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) {
2734                 b43_write16(dev, B43_MMIO_GPIO_MASK,
2735                             b43_read16(dev, B43_MMIO_GPIO_MASK)
2736                             | 0x0200);
2737                 mask |= 0x0200;
2738                 set |= 0x0200;
2739         }
2740         if (dev->dev->core_rev >= 2)
2741                 mask |= 0x0010; /* FIXME: This is redundant. */
2742
2743         switch (dev->dev->bus_type) {
2744 #ifdef CONFIG_B43_BCMA
2745         case B43_BUS_BCMA:
2746                 bcma_cc_write32(&dev->dev->bdev->bus->drv_cc, BCMA_CC_GPIOCTL,
2747                                 (bcma_cc_read32(&dev->dev->bdev->bus->drv_cc,
2748                                         BCMA_CC_GPIOCTL) & mask) | set);
2749                 break;
2750 #endif
2751 #ifdef CONFIG_B43_SSB
2752         case B43_BUS_SSB:
2753                 gpiodev = b43_ssb_gpio_dev(dev);
2754                 if (gpiodev)
2755                         ssb_write32(gpiodev, B43_GPIO_CONTROL,
2756                                     (ssb_read32(gpiodev, B43_GPIO_CONTROL)
2757                                     & mask) | set);
2758                 break;
2759 #endif
2760         }
2761
2762         return 0;
2763 }
2764
2765 /* Turn off all GPIO stuff. Call this on module unload, for example. */
2766 static void b43_gpio_cleanup(struct b43_wldev *dev)
2767 {
2768         struct ssb_device *gpiodev;
2769
2770         switch (dev->dev->bus_type) {
2771 #ifdef CONFIG_B43_BCMA
2772         case B43_BUS_BCMA:
2773                 bcma_cc_write32(&dev->dev->bdev->bus->drv_cc, BCMA_CC_GPIOCTL,
2774                                 0);
2775                 break;
2776 #endif
2777 #ifdef CONFIG_B43_SSB
2778         case B43_BUS_SSB:
2779                 gpiodev = b43_ssb_gpio_dev(dev);
2780                 if (gpiodev)
2781                         ssb_write32(gpiodev, B43_GPIO_CONTROL, 0);
2782                 break;
2783 #endif
2784         }
2785 }
2786
2787 /* http://bcm-specs.sipsolutions.net/EnableMac */
2788 void b43_mac_enable(struct b43_wldev *dev)
2789 {
2790         if (b43_debug(dev, B43_DBG_FIRMWARE)) {
2791                 u16 fwstate;
2792
2793                 fwstate = b43_shm_read16(dev, B43_SHM_SHARED,
2794                                          B43_SHM_SH_UCODESTAT);
2795                 if ((fwstate != B43_SHM_SH_UCODESTAT_SUSP) &&
2796                     (fwstate != B43_SHM_SH_UCODESTAT_SLEEP)) {
2797                         b43err(dev->wl, "b43_mac_enable(): The firmware "
2798                                "should be suspended, but current state is %u\n",
2799                                fwstate);
2800                 }
2801         }
2802
2803         dev->mac_suspended--;
2804         B43_WARN_ON(dev->mac_suspended < 0);
2805         if (dev->mac_suspended == 0) {
2806                 b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_ENABLED);
2807                 b43_write32(dev, B43_MMIO_GEN_IRQ_REASON,
2808                             B43_IRQ_MAC_SUSPENDED);
2809                 /* Commit writes */
2810                 b43_read32(dev, B43_MMIO_MACCTL);
2811                 b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2812                 b43_power_saving_ctl_bits(dev, 0);
2813         }
2814 }
2815
2816 /* http://bcm-specs.sipsolutions.net/SuspendMAC */
2817 void b43_mac_suspend(struct b43_wldev *dev)
2818 {
2819         int i;
2820         u32 tmp;
2821
2822         might_sleep();
2823         B43_WARN_ON(dev->mac_suspended < 0);
2824
2825         if (dev->mac_suspended == 0) {
2826                 b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
2827                 b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_ENABLED, 0);
2828                 /* force pci to flush the write */
2829                 b43_read32(dev, B43_MMIO_MACCTL);
2830                 for (i = 35; i; i--) {
2831                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2832                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2833                                 goto out;
2834                         udelay(10);
2835                 }
2836                 /* Hm, it seems this will take some time. Use msleep(). */
2837                 for (i = 40; i; i--) {
2838                         tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
2839                         if (tmp & B43_IRQ_MAC_SUSPENDED)
2840                                 goto out;
2841                         msleep(1);
2842                 }
2843                 b43err(dev->wl, "MAC suspend failed\n");
2844         }
2845 out:
2846         dev->mac_suspended++;
2847 }
2848
2849 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MacPhyClkSet */
2850 void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on)
2851 {
2852         u32 tmp;
2853
2854         switch (dev->dev->bus_type) {
2855 #ifdef CONFIG_B43_BCMA
2856         case B43_BUS_BCMA:
2857                 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
2858                 if (on)
2859                         tmp |= B43_BCMA_IOCTL_MACPHYCLKEN;
2860                 else
2861                         tmp &= ~B43_BCMA_IOCTL_MACPHYCLKEN;
2862                 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
2863                 break;
2864 #endif
2865 #ifdef CONFIG_B43_SSB
2866         case B43_BUS_SSB:
2867                 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
2868                 if (on)
2869                         tmp |= B43_TMSLOW_MACPHYCLKEN;
2870                 else
2871                         tmp &= ~B43_TMSLOW_MACPHYCLKEN;
2872                 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
2873                 break;
2874 #endif
2875         }
2876 }
2877
2878 static void b43_adjust_opmode(struct b43_wldev *dev)
2879 {
2880         struct b43_wl *wl = dev->wl;
2881         u32 ctl;
2882         u16 cfp_pretbtt;
2883
2884         ctl = b43_read32(dev, B43_MMIO_MACCTL);
2885         /* Reset status to STA infrastructure mode. */
2886         ctl &= ~B43_MACCTL_AP;
2887         ctl &= ~B43_MACCTL_KEEP_CTL;
2888         ctl &= ~B43_MACCTL_KEEP_BADPLCP;
2889         ctl &= ~B43_MACCTL_KEEP_BAD;
2890         ctl &= ~B43_MACCTL_PROMISC;
2891         ctl &= ~B43_MACCTL_BEACPROMISC;
2892         ctl |= B43_MACCTL_INFRA;
2893
2894         if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
2895             b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
2896                 ctl |= B43_MACCTL_AP;
2897         else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
2898                 ctl &= ~B43_MACCTL_INFRA;
2899
2900         if (wl->filter_flags & FIF_CONTROL)
2901                 ctl |= B43_MACCTL_KEEP_CTL;
2902         if (wl->filter_flags & FIF_FCSFAIL)
2903                 ctl |= B43_MACCTL_KEEP_BAD;
2904         if (wl->filter_flags & FIF_PLCPFAIL)
2905                 ctl |= B43_MACCTL_KEEP_BADPLCP;
2906         if (wl->filter_flags & FIF_PROMISC_IN_BSS)
2907                 ctl |= B43_MACCTL_PROMISC;
2908         if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC)
2909                 ctl |= B43_MACCTL_BEACPROMISC;
2910
2911         /* Workaround: On old hardware the HW-MAC-address-filter
2912          * doesn't work properly, so always run promisc in filter
2913          * it in software. */
2914         if (dev->dev->core_rev <= 4)
2915                 ctl |= B43_MACCTL_PROMISC;
2916
2917         b43_write32(dev, B43_MMIO_MACCTL, ctl);
2918
2919         cfp_pretbtt = 2;
2920         if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) {
2921                 if (dev->dev->chip_id == 0x4306 &&
2922                     dev->dev->chip_rev == 3)
2923                         cfp_pretbtt = 100;
2924                 else
2925                         cfp_pretbtt = 50;
2926         }
2927         b43_write16(dev, 0x612, cfp_pretbtt);
2928
2929         /* FIXME: We don't currently implement the PMQ mechanism,
2930          *        so always disable it. If we want to implement PMQ,
2931          *        we need to enable it here (clear DISCPMQ) in AP mode.
2932          */
2933         if (0  /* ctl & B43_MACCTL_AP */)
2934                 b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_DISCPMQ, 0);
2935         else
2936                 b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_DISCPMQ);
2937 }
2938
2939 static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm)
2940 {
2941         u16 offset;
2942
2943         if (is_ofdm) {
2944                 offset = 0x480;
2945                 offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2;
2946         } else {
2947                 offset = 0x4C0;
2948                 offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2;
2949         }
2950         b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20,
2951                         b43_shm_read16(dev, B43_SHM_SHARED, offset));
2952 }
2953
2954 static void b43_rate_memory_init(struct b43_wldev *dev)
2955 {
2956         switch (dev->phy.type) {
2957         case B43_PHYTYPE_A:
2958         case B43_PHYTYPE_G:
2959         case B43_PHYTYPE_N:
2960         case B43_PHYTYPE_LP:
2961         case B43_PHYTYPE_HT:
2962         case B43_PHYTYPE_LCN:
2963                 b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1);
2964                 b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1);
2965                 b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1);
2966                 b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1);
2967                 b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1);
2968                 b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1);
2969                 b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1);
2970                 if (dev->phy.type == B43_PHYTYPE_A)
2971                         break;
2972                 /* fallthrough */
2973         case B43_PHYTYPE_B:
2974                 b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0);
2975                 b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0);
2976                 b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0);
2977                 b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0);
2978                 break;
2979         default:
2980                 B43_WARN_ON(1);
2981         }
2982 }
2983
2984 /* Set the default values for the PHY TX Control Words. */
2985 static void b43_set_phytxctl_defaults(struct b43_wldev *dev)
2986 {
2987         u16 ctl = 0;
2988
2989         ctl |= B43_TXH_PHY_ENC_CCK;
2990         ctl |= B43_TXH_PHY_ANT01AUTO;
2991         ctl |= B43_TXH_PHY_TXPWR;
2992
2993         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, ctl);
2994         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, ctl);
2995         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, ctl);
2996 }
2997
2998 /* Set the TX-Antenna for management frames sent by firmware. */
2999 static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
3000 {
3001         u16 ant;
3002         u16 tmp;
3003
3004         ant = b43_antenna_to_phyctl(antenna);
3005
3006         /* For ACK/CTS */
3007         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL);
3008         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
3009         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp);
3010         /* For Probe Resposes */
3011         tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL);
3012         tmp = (tmp & ~B43_TXH_PHY_ANT) | ant;
3013         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp);
3014 }
3015
3016 /* This is the opposite of b43_chip_init() */
3017 static void b43_chip_exit(struct b43_wldev *dev)
3018 {
3019         b43_phy_exit(dev);
3020         b43_gpio_cleanup(dev);
3021         /* firmware is released later */
3022 }
3023
3024 /* Initialize the chip
3025  * http://bcm-specs.sipsolutions.net/ChipInit
3026  */
3027 static int b43_chip_init(struct b43_wldev *dev)
3028 {
3029         struct b43_phy *phy = &dev->phy;
3030         int err;
3031         u32 macctl;
3032         u16 value16;
3033
3034         /* Initialize the MAC control */
3035         macctl = B43_MACCTL_IHR_ENABLED | B43_MACCTL_SHM_ENABLED;
3036         if (dev->phy.gmode)
3037                 macctl |= B43_MACCTL_GMODE;
3038         macctl |= B43_MACCTL_INFRA;
3039         b43_write32(dev, B43_MMIO_MACCTL, macctl);
3040
3041         err = b43_upload_microcode(dev);
3042         if (err)
3043                 goto out;       /* firmware is released later */
3044
3045         err = b43_gpio_init(dev);
3046         if (err)
3047                 goto out;       /* firmware is released later */
3048
3049         err = b43_upload_initvals(dev);
3050         if (err)
3051                 goto err_gpio_clean;
3052
3053         /* Turn the Analog on and initialize the PHY. */
3054         phy->ops->switch_analog(dev, 1);
3055         err = b43_phy_init(dev);
3056         if (err)
3057                 goto err_gpio_clean;
3058
3059         /* Disable Interference Mitigation. */
3060         if (phy->ops->interf_mitigation)
3061                 phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE);
3062
3063         /* Select the antennae */
3064         if (phy->ops->set_rx_antenna)
3065                 phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
3066         b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);
3067
3068         if (phy->type == B43_PHYTYPE_B) {
3069                 value16 = b43_read16(dev, 0x005E);
3070                 value16 |= 0x0004;
3071                 b43_write16(dev, 0x005E, value16);
3072         }
3073         b43_write32(dev, 0x0100, 0x01000000);
3074         if (dev->dev->core_rev < 5)
3075                 b43_write32(dev, 0x010C, 0x01000000);
3076
3077         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_INFRA, 0);
3078         b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_INFRA);
3079
3080         /* Probe Response Timeout value */
3081         /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
3082         b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000);
3083
3084         /* Initially set the wireless operation mode. */
3085         b43_adjust_opmode(dev);
3086
3087         if (dev->dev->core_rev < 3) {
3088                 b43_write16(dev, 0x060E, 0x0000);
3089                 b43_write16(dev, 0x0610, 0x8000);
3090                 b43_write16(dev, 0x0604, 0x0000);
3091                 b43_write16(dev, 0x0606, 0x0200);
3092         } else {
3093                 b43_write32(dev, 0x0188, 0x80000000);
3094                 b43_write32(dev, 0x018C, 0x02000000);
3095         }
3096         b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000);
3097         b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
3098         b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
3099         b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
3100         b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
3101         b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
3102         b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
3103
3104         b43_mac_phy_clock_set(dev, true);
3105
3106         switch (dev->dev->bus_type) {
3107 #ifdef CONFIG_B43_BCMA
3108         case B43_BUS_BCMA:
3109                 /* FIXME: 0xE74 is quite common, but should be read from CC */
3110                 b43_write16(dev, B43_MMIO_POWERUP_DELAY, 0xE74);
3111                 break;
3112 #endif
3113 #ifdef CONFIG_B43_SSB
3114         case B43_BUS_SSB:
3115                 b43_write16(dev, B43_MMIO_POWERUP_DELAY,
3116                             dev->dev->sdev->bus->chipco.fast_pwrup_delay);
3117                 break;
3118 #endif
3119         }
3120
3121         err = 0;
3122         b43dbg(dev->wl, "Chip initialized\n");
3123 out:
3124         return err;
3125
3126 err_gpio_clean:
3127         b43_gpio_cleanup(dev);
3128         return err;
3129 }
3130
3131 static void b43_periodic_every60sec(struct b43_wldev *dev)
3132 {
3133         const struct b43_phy_operations *ops = dev->phy.ops;
3134
3135         if (ops->pwork_60sec)
3136                 ops->pwork_60sec(dev);
3137
3138         /* Force check the TX power emission now. */
3139         b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME);
3140 }
3141
3142 static void b43_periodic_every30sec(struct b43_wldev *dev)
3143 {
3144         /* Update device statistics. */
3145         b43_calculate_link_quality(dev);
3146 }
3147
3148 static void b43_periodic_every15sec(struct b43_wldev *dev)
3149 {
3150         struct b43_phy *phy = &dev->phy;
3151         u16 wdr;
3152
3153         if (dev->fw.opensource) {
3154                 /* Check if the firmware is still alive.
3155                  * It will reset the watchdog counter to 0 in its idle loop. */
3156                 wdr = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG);
3157                 if (unlikely(wdr)) {
3158                         b43err(dev->wl, "Firmware watchdog: The firmware died!\n");
3159                         b43_controller_restart(dev, "Firmware watchdog");
3160                         return;
3161                 } else {
3162                         b43_shm_write16(dev, B43_SHM_SCRATCH,
3163                                         B43_WATCHDOG_REG, 1);
3164                 }
3165         }
3166
3167         if (phy->ops->pwork_15sec)
3168                 phy->ops->pwork_15sec(dev);
3169
3170         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
3171         wmb();
3172
3173 #if B43_DEBUG
3174         if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
3175                 unsigned int i;
3176
3177                 b43dbg(dev->wl, "Stats: %7u IRQs/sec, %7u TX/sec, %7u RX/sec\n",
3178                        dev->irq_count / 15,
3179                        dev->tx_count / 15,
3180                        dev->rx_count / 15);
3181                 dev->irq_count = 0;
3182                 dev->tx_count = 0;
3183                 dev->rx_count = 0;
3184                 for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
3185                         if (dev->irq_bit_count[i]) {
3186                                 b43dbg(dev->wl, "Stats: %7u IRQ-%02u/sec (0x%08X)\n",
3187                                        dev->irq_bit_count[i] / 15, i, (1 << i));
3188                                 dev->irq_bit_count[i] = 0;
3189                         }
3190                 }
3191         }
3192 #endif
3193 }
3194
3195 static void do_periodic_work(struct b43_wldev *dev)
3196 {
3197         unsigned int state;
3198
3199         state = dev->periodic_state;
3200         if (state % 4 == 0)
3201                 b43_periodic_every60sec(dev);
3202         if (state % 2 == 0)
3203                 b43_periodic_every30sec(dev);
3204         b43_periodic_every15sec(dev);
3205 }
3206
3207 /* Periodic work locking policy:
3208  *      The whole periodic work handler is protected by
3209  *      wl->mutex. If another lock is needed somewhere in the
3210  *      pwork callchain, it's acquired in-place, where it's needed.
3211  */
3212 static void b43_periodic_work_handler(struct work_struct *work)
3213 {
3214         struct b43_wldev *dev = container_of(work, struct b43_wldev,
3215                                              periodic_work.work);
3216         struct b43_wl *wl = dev->wl;
3217         unsigned long delay;
3218
3219         mutex_lock(&wl->mutex);
3220
3221         if (unlikely(b43_status(dev) != B43_STAT_STARTED))
3222                 goto out;
3223         if (b43_debug(dev, B43_DBG_PWORK_STOP))
3224                 goto out_requeue;
3225
3226         do_periodic_work(dev);
3227
3228         dev->periodic_state++;
3229 out_requeue:
3230         if (b43_debug(dev, B43_DBG_PWORK_FAST))
3231                 delay = msecs_to_jiffies(50);
3232         else
3233                 delay = round_jiffies_relative(HZ * 15);
3234         ieee80211_queue_delayed_work(wl->hw, &dev->periodic_work, delay);
3235 out:
3236         mutex_unlock(&wl->mutex);
3237 }
3238
3239 static void b43_periodic_tasks_setup(struct b43_wldev *dev)
3240 {
3241         struct delayed_work *work = &dev->periodic_work;
3242
3243         dev->periodic_state = 0;
3244         INIT_DELAYED_WORK(work, b43_periodic_work_handler);
3245         ieee80211_queue_delayed_work(dev->wl->hw, work, 0);
3246 }
3247
3248 /* Check if communication with the device works correctly. */
3249 static int b43_validate_chipaccess(struct b43_wldev *dev)
3250 {
3251         u32 v, backup0, backup4;
3252
3253         backup0 = b43_shm_read32(dev, B43_SHM_SHARED, 0);
3254         backup4 = b43_shm_read32(dev, B43_SHM_SHARED, 4);
3255
3256         /* Check for read/write and endianness problems. */
3257         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55);
3258         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55)
3259                 goto error;
3260         b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA);
3261         if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA)
3262                 goto error;
3263
3264         /* Check if unaligned 32bit SHM_SHARED access works properly.
3265          * However, don't bail out on failure, because it's noncritical. */
3266         b43_shm_write16(dev, B43_SHM_SHARED, 0, 0x1122);
3267         b43_shm_write16(dev, B43_SHM_SHARED, 2, 0x3344);
3268         b43_shm_write16(dev, B43_SHM_SHARED, 4, 0x5566);
3269         b43_shm_write16(dev, B43_SHM_SHARED, 6, 0x7788);
3270         if (b43_shm_read32(dev, B43_SHM_SHARED, 2) != 0x55663344)
3271                 b43warn(dev->wl, "Unaligned 32bit SHM read access is broken\n");
3272         b43_shm_write32(dev, B43_SHM_SHARED, 2, 0xAABBCCDD);
3273         if (b43_shm_read16(dev, B43_SHM_SHARED, 0) != 0x1122 ||
3274             b43_shm_read16(dev, B43_SHM_SHARED, 2) != 0xCCDD ||
3275             b43_shm_read16(dev, B43_SHM_SHARED, 4) != 0xAABB ||
3276             b43_shm_read16(dev, B43_SHM_SHARED, 6) != 0x7788)
3277                 b43warn(dev->wl, "Unaligned 32bit SHM write access is broken\n");
3278
3279         b43_shm_write32(dev, B43_SHM_SHARED, 0, backup0);
3280         b43_shm_write32(dev, B43_SHM_SHARED, 4, backup4);
3281
3282         if ((dev->dev->core_rev >= 3) && (dev->dev->core_rev <= 10)) {
3283                 /* The 32bit register shadows the two 16bit registers
3284                  * with update sideeffects. Validate this. */
3285                 b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA);
3286                 b43_write32(dev, B43_MMIO_TSF_CFP_START, 0xCCCCBBBB);
3287                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_LOW) != 0xBBBB)
3288                         goto error;
3289                 if (b43_read16(dev, B43_MMIO_TSF_CFP_START_HIGH) != 0xCCCC)
3290                         goto error;
3291         }
3292         b43_write32(dev, B43_MMIO_TSF_CFP_START, 0);
3293
3294         v = b43_read32(dev, B43_MMIO_MACCTL);
3295         v |= B43_MACCTL_GMODE;
3296         if (v != (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED))
3297                 goto error;
3298
3299         return 0;
3300 error:
3301         b43err(dev->wl, "Failed to validate the chipaccess\n");
3302         return -ENODEV;
3303 }
3304
3305 static void b43_security_init(struct b43_wldev *dev)
3306 {
3307         dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP);
3308         /* KTP is a word address, but we address SHM bytewise.
3309          * So multiply by two.
3310          */
3311         dev->ktp *= 2;
3312         /* Number of RCMTA address slots */
3313         b43_write16(dev, B43_MMIO_RCMTA_COUNT, B43_NR_PAIRWISE_KEYS);
3314         /* Clear the key memory. */
3315         b43_clear_keys(dev);
3316 }
3317
3318 #ifdef CONFIG_B43_HWRNG
3319 static int b43_rng_read(struct hwrng *rng, u32 *data)
3320 {
3321         struct b43_wl *wl = (struct b43_wl *)rng->priv;
3322         struct b43_wldev *dev;
3323         int count = -ENODEV;
3324
3325         mutex_lock(&wl->mutex);
3326         dev = wl->current_dev;
3327         if (likely(dev && b43_status(dev) >= B43_STAT_INITIALIZED)) {
3328                 *data = b43_read16(dev, B43_MMIO_RNG);
3329                 count = sizeof(u16);
3330         }
3331         mutex_unlock(&wl->mutex);
3332
3333         return count;
3334 }
3335 #endif /* CONFIG_B43_HWRNG */
3336
3337 static void b43_rng_exit(struct b43_wl *wl)
3338 {
3339 #ifdef CONFIG_B43_HWRNG
3340         if (wl->rng_initialized)
3341                 hwrng_unregister(&wl->rng);
3342 #endif /* CONFIG_B43_HWRNG */
3343 }
3344
3345 static int b43_rng_init(struct b43_wl *wl)
3346 {
3347         int err = 0;
3348
3349 #ifdef CONFIG_B43_HWRNG
3350         snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
3351                  "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
3352         wl->rng.name = wl->rng_name;
3353         wl->rng.data_read = b43_rng_read;
3354         wl->rng.priv = (unsigned long)wl;
3355         wl->rng_initialized = true;
3356         err = hwrng_register(&wl->rng);
3357         if (err) {
3358                 wl->rng_initialized = false;
3359                 b43err(wl, "Failed to register the random "
3360                        "number generator (%d)\n", err);
3361         }
3362 #endif /* CONFIG_B43_HWRNG */
3363
3364         return err;
3365 }
3366
3367 static void b43_tx_work(struct work_struct *work)
3368 {
3369         struct b43_wl *wl = container_of(work, struct b43_wl, tx_work);
3370         struct b43_wldev *dev;
3371         struct sk_buff *skb;
3372         int queue_num;
3373         int err = 0;
3374
3375         mutex_lock(&wl->mutex);
3376         dev = wl->current_dev;
3377         if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED)) {
3378                 mutex_unlock(&wl->mutex);
3379                 return;
3380         }
3381
3382         for (queue_num = 0; queue_num < B43_QOS_QUEUE_NUM; queue_num++) {
3383                 while (skb_queue_len(&wl->tx_queue[queue_num])) {
3384                         skb = skb_dequeue(&wl->tx_queue[queue_num]);
3385                         if (b43_using_pio_transfers(dev))
3386                                 err = b43_pio_tx(dev, skb);
3387                         else
3388                                 err = b43_dma_tx(dev, skb);
3389                         if (err == -ENOSPC) {
3390                                 wl->tx_queue_stopped[queue_num] = 1;
3391                                 ieee80211_stop_queue(wl->hw, queue_num);
3392                                 skb_queue_head(&wl->tx_queue[queue_num], skb);
3393                                 break;
3394                         }
3395                         if (unlikely(err))
3396                                 dev_kfree_skb(skb); /* Drop it */
3397                         err = 0;
3398                 }
3399
3400                 if (!err)
3401                         wl->tx_queue_stopped[queue_num] = 0;
3402         }
3403
3404 #if B43_DEBUG
3405         dev->tx_count++;
3406 #endif
3407         mutex_unlock(&wl->mutex);
3408 }
3409
3410 static void b43_op_tx(struct ieee80211_hw *hw,
3411                      struct sk_buff *skb)
3412 {
3413         struct b43_wl *wl = hw_to_b43_wl(hw);
3414
3415         if (unlikely(skb->len < 2 + 2 + 6)) {
3416                 /* Too short, this can't be a valid frame. */
3417                 dev_kfree_skb_any(skb);
3418                 return;
3419         }
3420         B43_WARN_ON(skb_shinfo(skb)->nr_frags);
3421
3422         skb_queue_tail(&wl->tx_queue[skb->queue_mapping], skb);
3423         if (!wl->tx_queue_stopped[skb->queue_mapping]) {
3424                 ieee80211_queue_work(wl->hw, &wl->tx_work);
3425         } else {
3426                 ieee80211_stop_queue(wl->hw, skb->queue_mapping);
3427         }
3428 }
3429
3430 static void b43_qos_params_upload(struct b43_wldev *dev,
3431                                   const struct ieee80211_tx_queue_params *p,
3432                                   u16 shm_offset)
3433 {
3434         u16 params[B43_NR_QOSPARAMS];
3435         int bslots, tmp;
3436         unsigned int i;
3437
3438         if (!dev->qos_enabled)
3439                 return;
3440
3441         bslots = b43_read16(dev, B43_MMIO_RNG) & p->cw_min;
3442
3443         memset(&params, 0, sizeof(params));
3444
3445         params[B43_QOSPARAM_TXOP] = p->txop * 32;
3446         params[B43_QOSPARAM_CWMIN] = p->cw_min;
3447         params[B43_QOSPARAM_CWMAX] = p->cw_max;
3448         params[B43_QOSPARAM_CWCUR] = p->cw_min;
3449         params[B43_QOSPARAM_AIFS] = p->aifs;
3450         params[B43_QOSPARAM_BSLOTS] = bslots;
3451         params[B43_QOSPARAM_REGGAP] = bslots + p->aifs;
3452
3453         for (i = 0; i < ARRAY_SIZE(params); i++) {
3454                 if (i == B43_QOSPARAM_STATUS) {
3455                         tmp = b43_shm_read16(dev, B43_SHM_SHARED,
3456                                              shm_offset + (i * 2));
3457                         /* Mark the parameters as updated. */
3458                         tmp |= 0x100;
3459                         b43_shm_write16(dev, B43_SHM_SHARED,
3460                                         shm_offset + (i * 2),
3461                                         tmp);
3462                 } else {
3463                         b43_shm_write16(dev, B43_SHM_SHARED,
3464                                         shm_offset + (i * 2),
3465                                         params[i]);
3466                 }
3467         }
3468 }
3469
3470 /* Mapping of mac80211 queue numbers to b43 QoS SHM offsets. */
3471 static const u16 b43_qos_shm_offsets[] = {
3472         /* [mac80211-queue-nr] = SHM_OFFSET, */
3473         [0] = B43_QOS_VOICE,
3474         [1] = B43_QOS_VIDEO,
3475         [2] = B43_QOS_BESTEFFORT,
3476         [3] = B43_QOS_BACKGROUND,
3477 };
3478
3479 /* Update all QOS parameters in hardware. */
3480 static void b43_qos_upload_all(struct b43_wldev *dev)
3481 {
3482         struct b43_wl *wl = dev->wl;
3483         struct b43_qos_params *params;
3484         unsigned int i;
3485
3486         if (!dev->qos_enabled)
3487                 return;
3488
3489         BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
3490                      ARRAY_SIZE(wl->qos_params));
3491
3492         b43_mac_suspend(dev);
3493         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
3494                 params = &(wl->qos_params[i]);
3495                 b43_qos_params_upload(dev, &(params->p),
3496                                       b43_qos_shm_offsets[i]);
3497         }
3498         b43_mac_enable(dev);
3499 }
3500
3501 static void b43_qos_clear(struct b43_wl *wl)
3502 {
3503         struct b43_qos_params *params;
3504         unsigned int i;
3505
3506         /* Initialize QoS parameters to sane defaults. */
3507
3508         BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
3509                      ARRAY_SIZE(wl->qos_params));
3510
3511         for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
3512                 params = &(wl->qos_params[i]);
3513
3514                 switch (b43_qos_shm_offsets[i]) {
3515                 case B43_QOS_VOICE:
3516                         params->p.txop = 0;
3517                         params->p.aifs = 2;
3518                         params->p.cw_min = 0x0001;
3519                         params->p.cw_max = 0x0001;
3520                         break;
3521                 case B43_QOS_VIDEO:
3522                         params->p.txop = 0;
3523                         params->p.aifs = 2;
3524                         params->p.cw_min = 0x0001;
3525                         params->p.cw_max = 0x0001;
3526                         break;
3527                 case B43_QOS_BESTEFFORT:
3528                         params->p.txop = 0;
3529                         params->p.aifs = 3;
3530                         params->p.cw_min = 0x0001;
3531                         params->p.cw_max = 0x03FF;
3532                         break;
3533                 case B43_QOS_BACKGROUND:
3534                         params->p.txop = 0;
3535                         params->p.aifs = 7;
3536                         params->p.cw_min = 0x0001;
3537                         params->p.cw_max = 0x03FF;
3538                         break;
3539                 default:
3540                         B43_WARN_ON(1);
3541                 }
3542         }
3543 }
3544
3545 /* Initialize the core's QOS capabilities */
3546 static void b43_qos_init(struct b43_wldev *dev)
3547 {
3548         if (!dev->qos_enabled) {
3549                 /* Disable QOS support. */
3550                 b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_EDCF);
3551                 b43_write16(dev, B43_MMIO_IFSCTL,
3552                             b43_read16(dev, B43_MMIO_IFSCTL)
3553                             & ~B43_MMIO_IFSCTL_USE_EDCF);
3554                 b43dbg(dev->wl, "QoS disabled\n");
3555                 return;
3556         }
3557
3558         /* Upload the current QOS parameters. */
3559         b43_qos_upload_all(dev);
3560
3561         /* Enable QOS support. */
3562         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF);
3563         b43_write16(dev, B43_MMIO_IFSCTL,
3564                     b43_read16(dev, B43_MMIO_IFSCTL)
3565                     | B43_MMIO_IFSCTL_USE_EDCF);
3566         b43dbg(dev->wl, "QoS enabled\n");
3567 }
3568
3569 static int b43_op_conf_tx(struct ieee80211_hw *hw,
3570                           struct ieee80211_vif *vif, u16 _queue,
3571                           const struct ieee80211_tx_queue_params *params)
3572 {
3573         struct b43_wl *wl = hw_to_b43_wl(hw);
3574         struct b43_wldev *dev;
3575         unsigned int queue = (unsigned int)_queue;
3576         int err = -ENODEV;
3577
3578         if (queue >= ARRAY_SIZE(wl->qos_params)) {
3579                 /* Queue not available or don't support setting
3580                  * params on this queue. Return success to not
3581                  * confuse mac80211. */
3582                 return 0;
3583         }
3584         BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
3585                      ARRAY_SIZE(wl->qos_params));
3586
3587         mutex_lock(&wl->mutex);
3588         dev = wl->current_dev;
3589         if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED)))
3590                 goto out_unlock;
3591
3592         memcpy(&(wl->qos_params[queue].p), params, sizeof(*params));
3593         b43_mac_suspend(dev);
3594         b43_qos_params_upload(dev, &(wl->qos_params[queue].p),
3595                               b43_qos_shm_offsets[queue]);
3596         b43_mac_enable(dev);
3597         err = 0;
3598
3599 out_unlock:
3600         mutex_unlock(&wl->mutex);
3601
3602         return err;
3603 }
3604
3605 static int b43_op_get_stats(struct ieee80211_hw *hw,
3606                             struct ieee80211_low_level_stats *stats)
3607 {
3608         struct b43_wl *wl = hw_to_b43_wl(hw);
3609
3610         mutex_lock(&wl->mutex);
3611         memcpy(stats, &wl->ieee_stats, sizeof(*stats));
3612         mutex_unlock(&wl->mutex);
3613
3614         return 0;
3615 }
3616
3617 static u64 b43_op_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
3618 {
3619         struct b43_wl *wl = hw_to_b43_wl(hw);
3620         struct b43_wldev *dev;
3621         u64 tsf;
3622
3623         mutex_lock(&wl->mutex);
3624         dev = wl->current_dev;
3625
3626         if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED))
3627                 b43_tsf_read(dev, &tsf);
3628         else
3629                 tsf = 0;
3630
3631         mutex_unlock(&wl->mutex);
3632
3633         return tsf;
3634 }
3635
3636 static void b43_op_set_tsf(struct ieee80211_hw *hw,
3637                            struct ieee80211_vif *vif, u64 tsf)
3638 {
3639         struct b43_wl *wl = hw_to_b43_wl(hw);
3640         struct b43_wldev *dev;
3641
3642         mutex_lock(&wl->mutex);
3643         dev = wl->current_dev;
3644
3645         if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED))
3646                 b43_tsf_write(dev, tsf);
3647
3648         mutex_unlock(&wl->mutex);
3649 }
3650
3651 static void b43_put_phy_into_reset(struct b43_wldev *dev)
3652 {
3653         u32 tmp;
3654
3655         switch (dev->dev->bus_type) {
3656 #ifdef CONFIG_B43_BCMA
3657         case B43_BUS_BCMA:
3658                 b43err(dev->wl,
3659                        "Putting PHY into reset not supported on BCMA\n");
3660                 break;
3661 #endif
3662 #ifdef CONFIG_B43_SSB
3663         case B43_BUS_SSB:
3664                 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
3665                 tmp &= ~B43_TMSLOW_GMODE;
3666                 tmp |= B43_TMSLOW_PHYRESET;
3667                 tmp |= SSB_TMSLOW_FGC;
3668                 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
3669                 msleep(1);
3670
3671                 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
3672                 tmp &= ~SSB_TMSLOW_FGC;
3673                 tmp |= B43_TMSLOW_PHYRESET;
3674                 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
3675                 msleep(1);
3676
3677                 break;
3678 #endif
3679         }
3680 }
3681
3682 static const char *band_to_string(enum ieee80211_band band)
3683 {
3684         switch (band) {
3685         case IEEE80211_BAND_5GHZ:
3686                 return "5";
3687         case IEEE80211_BAND_2GHZ:
3688                 return "2.4";
3689         default:
3690                 break;
3691         }
3692         B43_WARN_ON(1);
3693         return "";
3694 }
3695
3696 /* Expects wl->mutex locked */
3697 static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
3698 {
3699         struct b43_wldev *up_dev = NULL;
3700         struct b43_wldev *down_dev;
3701         struct b43_wldev *d;
3702         int err;
3703         bool uninitialized_var(gmode);
3704         int prev_status;
3705
3706         /* Find a device and PHY which supports the band. */
3707         list_for_each_entry(d, &wl->devlist, list) {
3708                 switch (chan->band) {
3709                 case IEEE80211_BAND_5GHZ:
3710                         if (d->phy.supports_5ghz) {
3711                                 up_dev = d;
3712                                 gmode = false;
3713                         }
3714                         break;
3715                 case IEEE80211_BAND_2GHZ:
3716                         if (d->phy.supports_2ghz) {
3717                                 up_dev = d;
3718                                 gmode = true;
3719                         }
3720                         break;
3721                 default:
3722                         B43_WARN_ON(1);
3723                         return -EINVAL;
3724                 }
3725                 if (up_dev)
3726                         break;
3727         }
3728         if (!up_dev) {
3729                 b43err(wl, "Could not find a device for %s-GHz band operation\n",
3730                        band_to_string(chan->band));
3731                 return -ENODEV;
3732         }
3733         if ((up_dev == wl->current_dev) &&
3734             (!!wl->current_dev->phy.gmode == !!gmode)) {
3735                 /* This device is already running. */
3736                 return 0;
3737         }
3738         b43dbg(wl, "Switching to %s-GHz band\n",
3739                band_to_string(chan->band));
3740         down_dev = wl->current_dev;
3741
3742         prev_status = b43_status(down_dev);
3743         /* Shutdown the currently running core. */
3744         if (prev_status >= B43_STAT_STARTED)
3745                 down_dev = b43_wireless_core_stop(down_dev);
3746         if (prev_status >= B43_STAT_INITIALIZED)
3747                 b43_wireless_core_exit(down_dev);
3748
3749         if (down_dev != up_dev) {
3750                 /* We switch to a different core, so we put PHY into
3751                  * RESET on the old core. */
3752                 b43_put_phy_into_reset(down_dev);
3753         }
3754
3755         /* Now start the new core. */
3756         up_dev->phy.gmode = gmode;
3757         if (prev_status >= B43_STAT_INITIALIZED) {
3758                 err = b43_wireless_core_init(up_dev);
3759                 if (err) {
3760                         b43err(wl, "Fatal: Could not initialize device for "
3761                                "selected %s-GHz band\n",
3762                                band_to_string(chan->band));
3763                         goto init_failure;
3764                 }
3765         }
3766         if (prev_status >= B43_STAT_STARTED) {
3767                 err = b43_wireless_core_start(up_dev);
3768                 if (err) {
3769                         b43err(wl, "Fatal: Coult not start device for "
3770                                "selected %s-GHz band\n",
3771                                band_to_string(chan->band));
3772                         b43_wireless_core_exit(up_dev);
3773                         goto init_failure;
3774                 }
3775         }
3776         B43_WARN_ON(b43_status(up_dev) != prev_status);
3777
3778         wl->current_dev = up_dev;
3779
3780         return 0;
3781 init_failure:
3782         /* Whoops, failed to init the new core. No core is operating now. */
3783         wl->current_dev = NULL;
3784         return err;
3785 }
3786
3787 /* Write the short and long frame retry limit values. */
3788 static void b43_set_retry_limits(struct b43_wldev *dev,
3789                                  unsigned int short_retry,
3790                                  unsigned int long_retry)
3791 {
3792         /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
3793          * the chip-internal counter. */
3794         short_retry = min(short_retry, (unsigned int)0xF);
3795         long_retry = min(long_retry, (unsigned int)0xF);
3796
3797         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
3798                         short_retry);
3799         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
3800                         long_retry);
3801 }
3802
3803 static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
3804 {
3805         struct b43_wl *wl = hw_to_b43_wl(hw);
3806         struct b43_wldev *dev;
3807         struct b43_phy *phy;
3808         struct ieee80211_conf *conf = &hw->conf;
3809         int antenna;
3810         int err = 0;
3811         bool reload_bss = false;
3812
3813         mutex_lock(&wl->mutex);
3814
3815         dev = wl->current_dev;
3816
3817         /* Switch the band (if necessary). This might change the active core. */
3818         err = b43_switch_band(wl, conf->channel);
3819         if (err)
3820                 goto out_unlock_mutex;
3821
3822         /* Need to reload all settings if the core changed */
3823         if (dev != wl->current_dev) {
3824                 dev = wl->current_dev;
3825                 changed = ~0;
3826                 reload_bss = true;
3827         }
3828
3829         phy = &dev->phy;
3830
3831         if (conf_is_ht(conf))
3832                 phy->is_40mhz =
3833                         (conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf));
3834         else
3835                 phy->is_40mhz = false;
3836
3837         b43_mac_suspend(dev);
3838
3839         if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
3840                 b43_set_retry_limits(dev, conf->short_frame_max_tx_count,
3841                                           conf->long_frame_max_tx_count);
3842         changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS;
3843         if (!changed)
3844                 goto out_mac_enable;
3845
3846         /* Switch to the requested channel.
3847          * The firmware takes care of races with the TX handler. */
3848         if (conf->channel->hw_value != phy->channel)
3849                 b43_switch_channel(dev, conf->channel->hw_value);
3850
3851         dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR);
3852
3853         /* Adjust the desired TX power level. */
3854         if (conf->power_level != 0) {
3855                 if (conf->power_level != phy->desired_txpower) {
3856                         phy->desired_txpower = conf->power_level;
3857                         b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME |
3858                                                    B43_TXPWR_IGNORE_TSSI);
3859                 }
3860         }
3861
3862         /* Antennas for RX and management frame TX. */
3863         antenna = B43_ANTENNA_DEFAULT;
3864         b43_mgmtframe_txantenna(dev, antenna);
3865         antenna = B43_ANTENNA_DEFAULT;
3866         if (phy->ops->set_rx_antenna)
3867                 phy->ops->set_rx_antenna(dev, antenna);
3868
3869         if (wl->radio_enabled != phy->radio_on) {
3870                 if (wl->radio_enabled) {
3871                         b43_software_rfkill(dev, false);
3872                         b43info(dev->wl, "Radio turned on by software\n");
3873                         if (!dev->radio_hw_enable) {
3874                                 b43info(dev->wl, "The hardware RF-kill button "
3875                                         "still turns the radio physically off. "
3876                                         "Press the button to turn it on.\n");
3877                         }
3878                 } else {
3879                         b43_software_rfkill(dev, true);
3880                         b43info(dev->wl, "Radio turned off by software\n");
3881                 }
3882         }
3883
3884 out_mac_enable:
3885         b43_mac_enable(dev);
3886 out_unlock_mutex:
3887         mutex_unlock(&wl->mutex);
3888
3889         if (wl->vif && reload_bss)
3890                 b43_op_bss_info_changed(hw, wl->vif, &wl->vif->bss_conf, ~0);
3891
3892         return err;
3893 }
3894
3895 static void b43_update_basic_rates(struct b43_wldev *dev, u32 brates)
3896 {
3897         struct ieee80211_supported_band *sband =
3898                 dev->wl->hw->wiphy->bands[b43_current_band(dev->wl)];
3899         struct ieee80211_rate *rate;
3900         int i;
3901         u16 basic, direct, offset, basic_offset, rateptr;
3902
3903         for (i = 0; i < sband->n_bitrates; i++) {
3904                 rate = &sband->bitrates[i];
3905
3906                 if (b43_is_cck_rate(rate->hw_value)) {
3907                         direct = B43_SHM_SH_CCKDIRECT;
3908                         basic = B43_SHM_SH_CCKBASIC;
3909                         offset = b43_plcp_get_ratecode_cck(rate->hw_value);
3910                         offset &= 0xF;
3911                 } else {
3912                         direct = B43_SHM_SH_OFDMDIRECT;
3913                         basic = B43_SHM_SH_OFDMBASIC;
3914                         offset = b43_plcp_get_ratecode_ofdm(rate->hw_value);
3915                         offset &= 0xF;
3916                 }
3917
3918                 rate = ieee80211_get_response_rate(sband, brates, rate->bitrate);
3919
3920                 if (b43_is_cck_rate(rate->hw_value)) {
3921                         basic_offset = b43_plcp_get_ratecode_cck(rate->hw_value);
3922                         basic_offset &= 0xF;
3923                 } else {
3924                         basic_offset = b43_plcp_get_ratecode_ofdm(rate->hw_value);
3925                         basic_offset &= 0xF;
3926                 }
3927
3928                 /*
3929                  * Get the pointer that we need to point to
3930                  * from the direct map
3931                  */
3932                 rateptr = b43_shm_read16(dev, B43_SHM_SHARED,
3933                                          direct + 2 * basic_offset);
3934                 /* and write it to the basic map */
3935                 b43_shm_write16(dev, B43_SHM_SHARED, basic + 2 * offset,
3936                                 rateptr);
3937         }
3938 }
3939
3940 static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
3941                                     struct ieee80211_vif *vif,
3942                                     struct ieee80211_bss_conf *conf,
3943                                     u32 changed)
3944 {
3945         struct b43_wl *wl = hw_to_b43_wl(hw);
3946         struct b43_wldev *dev;
3947
3948         mutex_lock(&wl->mutex);
3949
3950         dev = wl->current_dev;
3951         if (!dev || b43_status(dev) < B43_STAT_STARTED)
3952                 goto out_unlock_mutex;
3953
3954         B43_WARN_ON(wl->vif != vif);
3955
3956         if (changed & BSS_CHANGED_BSSID) {
3957                 if (conf->bssid)
3958                         memcpy(wl->bssid, conf->bssid, ETH_ALEN);
3959                 else
3960                         memset(wl->bssid, 0, ETH_ALEN);
3961         }
3962
3963         if (b43_status(dev) >= B43_STAT_INITIALIZED) {
3964                 if (changed & BSS_CHANGED_BEACON &&
3965                     (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
3966                      b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
3967                      b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
3968                         b43_update_templates(wl);
3969
3970                 if (changed & BSS_CHANGED_BSSID)
3971                         b43_write_mac_bssid_templates(dev);
3972         }
3973
3974         b43_mac_suspend(dev);
3975
3976         /* Update templates for AP/mesh mode. */
3977         if (changed & BSS_CHANGED_BEACON_INT &&
3978             (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
3979              b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
3980              b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) &&
3981             conf->beacon_int)
3982                 b43_set_beacon_int(dev, conf->beacon_int);
3983
3984         if (changed & BSS_CHANGED_BASIC_RATES)
3985                 b43_update_basic_rates(dev, conf->basic_rates);
3986
3987         if (changed & BSS_CHANGED_ERP_SLOT) {
3988                 if (conf->use_short_slot)
3989                         b43_short_slot_timing_enable(dev);
3990                 else
3991                         b43_short_slot_timing_disable(dev);
3992         }
3993
3994         b43_mac_enable(dev);
3995 out_unlock_mutex:
3996         mutex_unlock(&wl->mutex);
3997 }
3998
3999 static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
4000                           struct ieee80211_vif *vif, struct ieee80211_sta *sta,
4001                           struct ieee80211_key_conf *key)
4002 {
4003         struct b43_wl *wl = hw_to_b43_wl(hw);
4004         struct b43_wldev *dev;
4005         u8 algorithm;
4006         u8 index;
4007         int err;
4008         static const u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
4009
4010         if (modparam_nohwcrypt)
4011                 return -ENOSPC; /* User disabled HW-crypto */
4012
4013         if ((vif->type == NL80211_IFTYPE_ADHOC ||
4014              vif->type == NL80211_IFTYPE_MESH_POINT) &&
4015             (key->cipher == WLAN_CIPHER_SUITE_TKIP ||
4016              key->cipher == WLAN_CIPHER_SUITE_CCMP) &&
4017             !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
4018                 /*
4019                  * For now, disable hw crypto for the RSN IBSS group keys. This
4020                  * could be optimized in the future, but until that gets
4021                  * implemented, use of software crypto for group addressed
4022                  * frames is a acceptable to allow RSN IBSS to be used.
4023                  */
4024                 return -EOPNOTSUPP;
4025         }
4026
4027         mutex_lock(&wl->mutex);
4028
4029         dev = wl->current_dev;
4030         err = -ENODEV;
4031         if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
4032                 goto out_unlock;
4033
4034         if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) {
4035                 /* We don't have firmware for the crypto engine.
4036                  * Must use software-crypto. */
4037                 err = -EOPNOTSUPP;
4038                 goto out_unlock;
4039         }
4040
4041         err = -EINVAL;
4042         switch (key->cipher) {
4043         case WLAN_CIPHER_SUITE_WEP40:
4044                 algorithm = B43_SEC_ALGO_WEP40;
4045                 break;
4046         case WLAN_CIPHER_SUITE_WEP104:
4047                 algorithm = B43_SEC_ALGO_WEP104;
4048                 break;
4049         case WLAN_CIPHER_SUITE_TKIP:
4050                 algorithm = B43_SEC_ALGO_TKIP;
4051                 break;
4052         case WLAN_CIPHER_SUITE_CCMP:
4053                 algorithm = B43_SEC_ALGO_AES;
4054                 break;
4055         default:
4056                 B43_WARN_ON(1);
4057                 goto out_unlock;
4058         }
4059         index = (u8) (key->keyidx);
4060         if (index > 3)
4061                 goto out_unlock;
4062
4063         switch (cmd) {
4064         case SET_KEY:
4065                 if (algorithm == B43_SEC_ALGO_TKIP &&
4066                     (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE) ||
4067                     !modparam_hwtkip)) {
4068                         /* We support only pairwise key */
4069                         err = -EOPNOTSUPP;
4070                         goto out_unlock;
4071                 }
4072
4073                 if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
4074                         if (WARN_ON(!sta)) {
4075                                 err = -EOPNOTSUPP;
4076                                 goto out_unlock;
4077                         }
4078                         /* Pairwise key with an assigned MAC address. */
4079                         err = b43_key_write(dev, -1, algorithm,
4080                                             key->key, key->keylen,
4081                                             sta->addr, key);
4082                 } else {
4083                         /* Group key */
4084                         err = b43_key_write(dev, index, algorithm,
4085                                             key->key, key->keylen, NULL, key);
4086                 }
4087                 if (err)
4088                         goto out_unlock;
4089
4090                 if (algorithm == B43_SEC_ALGO_WEP40 ||
4091                     algorithm == B43_SEC_ALGO_WEP104) {
4092                         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS);
4093                 } else {
4094                         b43_hf_write(dev,
4095                                      b43_hf_read(dev) & ~B43_HF_USEDEFKEYS);
4096                 }
4097                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
4098                 if (algorithm == B43_SEC_ALGO_TKIP)
4099                         key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
4100                 break;
4101         case DISABLE_KEY: {
4102                 err = b43_key_clear(dev, key->hw_key_idx);
4103                 if (err)
4104                         goto out_unlock;
4105                 break;
4106         }
4107         default:
4108                 B43_WARN_ON(1);
4109         }
4110
4111 out_unlock:
4112         if (!err) {
4113                 b43dbg(wl, "%s hardware based encryption for keyidx: %d, "
4114                        "mac: %pM\n",
4115                        cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
4116                        sta ? sta->addr : bcast_addr);
4117                 b43_dump_keymemory(dev);
4118         }
4119         mutex_unlock(&wl->mutex);
4120
4121         return err;
4122 }
4123
4124 static void b43_op_configure_filter(struct ieee80211_hw *hw,
4125                                     unsigned int changed, unsigned int *fflags,
4126                                     u64 multicast)
4127 {
4128         struct b43_wl *wl = hw_to_b43_wl(hw);
4129         struct b43_wldev *dev;
4130
4131         mutex_lock(&wl->mutex);
4132         dev = wl->current_dev;
4133         if (!dev) {
4134                 *fflags = 0;
4135                 goto out_unlock;
4136         }
4137
4138         *fflags &= FIF_PROMISC_IN_BSS |
4139                   FIF_ALLMULTI |
4140                   FIF_FCSFAIL |
4141                   FIF_PLCPFAIL |
4142                   FIF_CONTROL |
4143                   FIF_OTHER_BSS |
4144                   FIF_BCN_PRBRESP_PROMISC;
4145
4146         changed &= FIF_PROMISC_IN_BSS |
4147                    FIF_ALLMULTI |
4148                    FIF_FCSFAIL |
4149                    FIF_PLCPFAIL |
4150                    FIF_CONTROL |
4151                    FIF_OTHER_BSS |
4152                    FIF_BCN_PRBRESP_PROMISC;
4153
4154         wl->filter_flags = *fflags;
4155
4156         if (changed && b43_status(dev) >= B43_STAT_INITIALIZED)
4157                 b43_adjust_opmode(dev);
4158
4159 out_unlock:
4160         mutex_unlock(&wl->mutex);
4161 }
4162
4163 /* Locking: wl->mutex
4164  * Returns the current dev. This might be different from the passed in dev,
4165  * because the core might be gone away while we unlocked the mutex. */
4166 static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev)
4167 {
4168         struct b43_wl *wl;
4169         struct b43_wldev *orig_dev;
4170         u32 mask;
4171         int queue_num;
4172
4173         if (!dev)
4174                 return NULL;
4175         wl = dev->wl;
4176 redo:
4177         if (!dev || b43_status(dev) < B43_STAT_STARTED)
4178                 return dev;
4179
4180         /* Cancel work. Unlock to avoid deadlocks. */
4181         mutex_unlock(&wl->mutex);
4182         cancel_delayed_work_sync(&dev->periodic_work);
4183         cancel_work_sync(&wl->tx_work);
4184         cancel_work_sync(&wl->firmware_load);
4185         mutex_lock(&wl->mutex);
4186         dev = wl->current_dev;
4187         if (!dev || b43_status(dev) < B43_STAT_STARTED) {
4188                 /* Whoops, aliens ate up the device while we were unlocked. */
4189                 return dev;
4190         }
4191
4192         /* Disable interrupts on the device. */
4193         b43_set_status(dev, B43_STAT_INITIALIZED);
4194         if (b43_bus_host_is_sdio(dev->dev)) {
4195                 /* wl->mutex is locked. That is enough. */
4196                 b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
4197                 b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
4198         } else {
4199                 spin_lock_irq(&wl->hardirq_lock);
4200                 b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
4201                 b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
4202                 spin_unlock_irq(&wl->hardirq_lock);
4203         }
4204         /* Synchronize and free the interrupt handlers. Unlock to avoid deadlocks. */
4205         orig_dev = dev;
4206         mutex_unlock(&wl->mutex);
4207         if (b43_bus_host_is_sdio(dev->dev)) {
4208                 b43_sdio_free_irq(dev);
4209         } else {
4210                 synchronize_irq(dev->dev->irq);
4211                 free_irq(dev->dev->irq, dev);
4212         }
4213         mutex_lock(&wl->mutex);
4214         dev = wl->current_dev;
4215         if (!dev)
4216                 return dev;
4217         if (dev != orig_dev) {
4218                 if (b43_status(dev) >= B43_STAT_STARTED)
4219                         goto redo;
4220                 return dev;
4221         }
4222         mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
4223         B43_WARN_ON(mask != 0xFFFFFFFF && mask);
4224
4225         /* Drain all TX queues. */
4226         for (queue_num = 0; queue_num < B43_QOS_QUEUE_NUM; queue_num++) {
4227                 while (skb_queue_len(&wl->tx_queue[queue_num]))
4228                         dev_kfree_skb(skb_dequeue(&wl->tx_queue[queue_num]));
4229         }
4230
4231         b43_mac_suspend(dev);
4232         b43_leds_exit(dev);
4233         b43dbg(wl, "Wireless interface stopped\n");
4234
4235         return dev;
4236 }
4237
4238 /* Locking: wl->mutex */
4239 static int b43_wireless_core_start(struct b43_wldev *dev)
4240 {
4241         int err;
4242
4243         B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
4244
4245         drain_txstatus_queue(dev);
4246         if (b43_bus_host_is_sdio(dev->dev)) {
4247                 err = b43_sdio_request_irq(dev, b43_sdio_interrupt_handler);
4248                 if (err) {
4249                         b43err(dev->wl, "Cannot request SDIO IRQ\n");
4250                         goto out;
4251                 }
4252         } else {
4253                 err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
4254                                            b43_interrupt_thread_handler,
4255                                            IRQF_SHARED, KBUILD_MODNAME, dev);
4256                 if (err) {
4257                         b43err(dev->wl, "Cannot request IRQ-%d\n",
4258                                dev->dev->irq);
4259                         goto out;
4260                 }
4261         }
4262
4263         /* We are ready to run. */
4264         ieee80211_wake_queues(dev->wl->hw);
4265         b43_set_status(dev, B43_STAT_STARTED);
4266
4267         /* Start data flow (TX/RX). */
4268         b43_mac_enable(dev);
4269         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
4270
4271         /* Start maintenance work */
4272         b43_periodic_tasks_setup(dev);
4273
4274         b43_leds_init(dev);
4275
4276         b43dbg(dev->wl, "Wireless interface started\n");
4277 out:
4278         return err;
4279 }
4280
4281 /* Get PHY and RADIO versioning numbers */
4282 static int b43_phy_versioning(struct b43_wldev *dev)
4283 {
4284         struct b43_phy *phy = &dev->phy;
4285         u32 tmp;
4286         u8 analog_type;
4287         u8 phy_type;
4288         u8 phy_rev;
4289         u16 radio_manuf;
4290         u16 radio_ver;
4291         u16 radio_rev;
4292         int unsupported = 0;
4293
4294         /* Get PHY versioning */
4295         tmp = b43_read16(dev, B43_MMIO_PHY_VER);
4296         analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT;
4297         phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
4298         phy_rev = (tmp & B43_PHYVER_VERSION);
4299         switch (phy_type) {
4300         case B43_PHYTYPE_A:
4301                 if (phy_rev >= 4)
4302                         unsupported = 1;
4303                 break;
4304         case B43_PHYTYPE_B:
4305                 if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6
4306                     && phy_rev != 7)
4307                         unsupported = 1;
4308                 break;
4309         case B43_PHYTYPE_G:
4310                 if (phy_rev > 9)
4311                         unsupported = 1;
4312                 break;
4313 #ifdef CONFIG_B43_PHY_N
4314         case B43_PHYTYPE_N:
4315                 if (phy_rev > 9)
4316                         unsupported = 1;
4317                 break;
4318 #endif
4319 #ifdef CONFIG_B43_PHY_LP
4320         case B43_PHYTYPE_LP:
4321                 if (phy_rev > 2)
4322                         unsupported = 1;
4323                 break;
4324 #endif
4325 #ifdef CONFIG_B43_PHY_HT
4326         case B43_PHYTYPE_HT:
4327                 if (phy_rev > 1)
4328                         unsupported = 1;
4329                 break;
4330 #endif
4331 #ifdef CONFIG_B43_PHY_LCN
4332         case B43_PHYTYPE_LCN:
4333                 if (phy_rev > 1)
4334                         unsupported = 1;
4335                 break;
4336 #endif
4337         default:
4338                 unsupported = 1;
4339         }
4340         if (unsupported) {
4341                 b43err(dev->wl, "FOUND UNSUPPORTED PHY "
4342                        "(Analog %u, Type %u, Revision %u)\n",
4343                        analog_type, phy_type, phy_rev);
4344                 return -EOPNOTSUPP;
4345         }
4346         b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n",
4347                analog_type, phy_type, phy_rev);
4348
4349         /* Get RADIO versioning */
4350         if (dev->dev->core_rev >= 24) {
4351                 u16 radio24[3];
4352
4353                 for (tmp = 0; tmp < 3; tmp++) {
4354                         b43_write16(dev, B43_MMIO_RADIO24_CONTROL, tmp);
4355                         radio24[tmp] = b43_read16(dev, B43_MMIO_RADIO24_DATA);
4356                 }
4357
4358                 /* Broadcom uses "id" for our "ver" and has separated "ver" */
4359                 /* radio_ver = (radio24[0] & 0xF0) >> 4; */
4360
4361                 radio_manuf = 0x17F;
4362                 radio_ver = (radio24[2] << 8) | radio24[1];
4363                 radio_rev = (radio24[0] & 0xF);
4364         } else {
4365                 if (dev->dev->chip_id == 0x4317) {
4366                         if (dev->dev->chip_rev == 0)
4367                                 tmp = 0x3205017F;
4368                         else if (dev->dev->chip_rev == 1)
4369                                 tmp = 0x4205017F;
4370                         else
4371                                 tmp = 0x5205017F;
4372                 } else {
4373                         b43_write16(dev, B43_MMIO_RADIO_CONTROL,
4374                                     B43_RADIOCTL_ID);
4375                         tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
4376                         b43_write16(dev, B43_MMIO_RADIO_CONTROL,
4377                                     B43_RADIOCTL_ID);
4378                         tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH)
4379                                 << 16;
4380                 }
4381                 radio_manuf = (tmp & 0x00000FFF);
4382                 radio_ver = (tmp & 0x0FFFF000) >> 12;
4383                 radio_rev = (tmp & 0xF0000000) >> 28;
4384         }
4385
4386         if (radio_manuf != 0x17F /* Broadcom */)
4387                 unsupported = 1;
4388         switch (phy_type) {
4389         case B43_PHYTYPE_A:
4390                 if (radio_ver != 0x2060)
4391                         unsupported = 1;
4392                 if (radio_rev != 1)
4393                         unsupported = 1;
4394                 if (radio_manuf != 0x17F)
4395                         unsupported = 1;
4396                 break;
4397         case B43_PHYTYPE_B:
4398                 if ((radio_ver & 0xFFF0) != 0x2050)
4399                         unsupported = 1;
4400                 break;
4401         case B43_PHYTYPE_G:
4402                 if (radio_ver != 0x2050)
4403                         unsupported = 1;
4404                 break;
4405         case B43_PHYTYPE_N:
4406                 if (radio_ver != 0x2055 && radio_ver != 0x2056)
4407                         unsupported = 1;
4408                 break;
4409         case B43_PHYTYPE_LP:
4410                 if (radio_ver != 0x2062 && radio_ver != 0x2063)
4411                         unsupported = 1;
4412                 break;
4413         case B43_PHYTYPE_HT:
4414                 if (radio_ver != 0x2059)
4415                         unsupported = 1;
4416                 break;
4417         case B43_PHYTYPE_LCN:
4418                 if (radio_ver != 0x2064)
4419                         unsupported = 1;
4420                 break;
4421         default:
4422                 B43_WARN_ON(1);
4423         }
4424         if (unsupported) {
4425                 b43err(dev->wl, "FOUND UNSUPPORTED RADIO "
4426                        "(Manuf 0x%X, Version 0x%X, Revision %u)\n",
4427                        radio_manuf, radio_ver, radio_rev);
4428                 return -EOPNOTSUPP;
4429         }
4430         b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n",
4431                radio_manuf, radio_ver, radio_rev);
4432
4433         phy->radio_manuf = radio_manuf;
4434         phy->radio_ver = radio_ver;
4435         phy->radio_rev = radio_rev;
4436
4437         phy->analog = analog_type;
4438         phy->type = phy_type;
4439         phy->rev = phy_rev;
4440
4441         return 0;
4442 }
4443
4444 static void setup_struct_phy_for_init(struct b43_wldev *dev,
4445                                       struct b43_phy *phy)
4446 {
4447         phy->hardware_power_control = !!modparam_hwpctl;
4448         phy->next_txpwr_check_time = jiffies;
4449         /* PHY TX errors counter. */
4450         atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
4451
4452 #if B43_DEBUG
4453         phy->phy_locked = false;
4454         phy->radio_locked = false;
4455 #endif
4456 }
4457
4458 static void setup_struct_wldev_for_init(struct b43_wldev *dev)
4459 {
4460         dev->dfq_valid = false;
4461
4462         /* Assume the radio is enabled. If it's not enabled, the state will
4463          * immediately get fixed on the first periodic work run. */
4464         dev->radio_hw_enable = true;
4465
4466         /* Stats */
4467         memset(&dev->stats, 0, sizeof(dev->stats));
4468
4469         setup_struct_phy_for_init(dev, &dev->phy);
4470
4471         /* IRQ related flags */
4472         dev->irq_reason = 0;
4473         memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
4474         dev->irq_mask = B43_IRQ_MASKTEMPLATE;
4475         if (b43_modparam_verbose < B43_VERBOSITY_DEBUG)
4476                 dev->irq_mask &= ~B43_IRQ_PHY_TXERR;
4477
4478         dev->mac_suspended = 1;
4479
4480         /* Noise calculation context */
4481         memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
4482 }
4483
4484 static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
4485 {
4486         struct ssb_sprom *sprom = dev->dev->bus_sprom;
4487         u64 hf;
4488
4489         if (!modparam_btcoex)
4490                 return;
4491         if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
4492                 return;
4493         if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
4494                 return;
4495
4496         hf = b43_hf_read(dev);
4497         if (sprom->boardflags_lo & B43_BFL_BTCMOD)
4498                 hf |= B43_HF_BTCOEXALT;
4499         else
4500                 hf |= B43_HF_BTCOEX;
4501         b43_hf_write(dev, hf);
4502 }
4503
4504 static void b43_bluetooth_coext_disable(struct b43_wldev *dev)
4505 {
4506         if (!modparam_btcoex)
4507                 return;
4508         //TODO
4509 }
4510
4511 static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
4512 {
4513         struct ssb_bus *bus;
4514         u32 tmp;
4515
4516         if (dev->dev->bus_type != B43_BUS_SSB)
4517                 return;
4518
4519         bus = dev->dev->sdev->bus;
4520
4521         if ((bus->chip_id == 0x4311 && bus->chip_rev == 2) ||
4522             (bus->chip_id == 0x4312)) {
4523                 tmp = ssb_read32(dev->dev->sdev, SSB_IMCFGLO);
4524                 tmp &= ~SSB_IMCFGLO_REQTO;
4525                 tmp &= ~SSB_IMCFGLO_SERTO;
4526                 tmp |= 0x3;
4527                 ssb_write32(dev->dev->sdev, SSB_IMCFGLO, tmp);
4528                 ssb_commit_settings(bus);
4529         }
4530 }
4531
4532 static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
4533 {
4534         u16 pu_delay;
4535
4536         /* The time value is in microseconds. */
4537         if (dev->phy.type == B43_PHYTYPE_A)
4538                 pu_delay = 3700;
4539         else
4540                 pu_delay = 1050;
4541         if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle)
4542                 pu_delay = 500;
4543         if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8))
4544                 pu_delay = max(pu_delay, (u16)2400);
4545
4546         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SPUWKUP, pu_delay);
4547 }
4548
4549 /* Set the TSF CFP pre-TargetBeaconTransmissionTime. */
4550 static void b43_set_pretbtt(struct b43_wldev *dev)
4551 {
4552         u16 pretbtt;
4553
4554         /* The time value is in microseconds. */
4555         if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) {
4556                 pretbtt = 2;
4557         } else {
4558                 if (dev->phy.type == B43_PHYTYPE_A)
4559                         pretbtt = 120;
4560                 else
4561                         pretbtt = 250;
4562         }
4563         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRETBTT, pretbtt);
4564         b43_write16(dev, B43_MMIO_TSF_CFP_PRETBTT, pretbtt);
4565 }
4566
4567 /* Shutdown a wireless core */
4568 /* Locking: wl->mutex */
4569 static void b43_wireless_core_exit(struct b43_wldev *dev)
4570 {
4571         B43_WARN_ON(dev && b43_status(dev) > B43_STAT_INITIALIZED);
4572         if (!dev || b43_status(dev) != B43_STAT_INITIALIZED)
4573                 return;
4574
4575         /* Unregister HW RNG driver */
4576         b43_rng_exit(dev->wl);
4577
4578         b43_set_status(dev, B43_STAT_UNINIT);
4579
4580         /* Stop the microcode PSM. */
4581         b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PSM_RUN,
4582                       B43_MACCTL_PSM_JMP0);
4583
4584         b43_dma_free(dev);
4585         b43_pio_free(dev);
4586         b43_chip_exit(dev);
4587         dev->phy.ops->switch_analog(dev, 0);
4588         if (dev->wl->current_beacon) {
4589                 dev_kfree_skb_any(dev->wl->current_beacon);
4590                 dev->wl->current_beacon = NULL;
4591         }
4592
4593         b43_device_disable(dev, 0);
4594         b43_bus_may_powerdown(dev);
4595 }
4596
4597 /* Initialize a wireless core */
4598 static int b43_wireless_core_init(struct b43_wldev *dev)
4599 {
4600         struct ssb_sprom *sprom = dev->dev->bus_sprom;
4601         struct b43_phy *phy = &dev->phy;
4602         int err;
4603         u64 hf;
4604
4605         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
4606
4607         err = b43_bus_powerup(dev, 0);
4608         if (err)
4609                 goto out;
4610         if (!b43_device_is_enabled(dev))
4611                 b43_wireless_core_reset(dev, phy->gmode);
4612
4613         /* Reset all data structures. */
4614         setup_struct_wldev_for_init(dev);
4615         phy->ops->prepare_structs(dev);
4616
4617         /* Enable IRQ routing to this device. */
4618         switch (dev->dev->bus_type) {
4619 #ifdef CONFIG_B43_BCMA
4620         case B43_BUS_BCMA:
4621                 bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci,
4622                                       dev->dev->bdev, true);
4623                 break;
4624 #endif
4625 #ifdef CONFIG_B43_SSB
4626         case B43_BUS_SSB:
4627                 ssb_pcicore_dev_irqvecs_enable(&dev->dev->sdev->bus->pcicore,
4628                                                dev->dev->sdev);
4629                 break;
4630 #endif
4631         }
4632
4633         b43_imcfglo_timeouts_workaround(dev);
4634         b43_bluetooth_coext_disable(dev);
4635         if (phy->ops->prepare_hardware) {
4636                 err = phy->ops->prepare_hardware(dev);
4637                 if (err)
4638                         goto err_busdown;
4639         }
4640         err = b43_chip_init(dev);
4641         if (err)
4642                 goto err_busdown;
4643         b43_shm_write16(dev, B43_SHM_SHARED,
4644                         B43_SHM_SH_WLCOREREV, dev->dev->core_rev);
4645         hf = b43_hf_read(dev);
4646         if (phy->type == B43_PHYTYPE_G) {
4647                 hf |= B43_HF_SYMW;
4648                 if (phy->rev == 1)
4649                         hf |= B43_HF_GDCW;
4650                 if (sprom->boardflags_lo & B43_BFL_PACTRL)
4651                         hf |= B43_HF_OFDMPABOOST;
4652         }
4653         if (phy->radio_ver == 0x2050) {
4654                 if (phy->radio_rev == 6)
4655                         hf |= B43_HF_4318TSSI;
4656                 if (phy->radio_rev < 6)
4657                         hf |= B43_HF_VCORECALC;
4658         }
4659         if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
4660                 hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
4661 #ifdef CONFIG_SSB_DRIVER_PCICORE
4662         if (dev->dev->bus_type == B43_BUS_SSB &&
4663             dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
4664             dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
4665                 hf |= B43_HF_PCISCW; /* PCI slow clock workaround. */
4666 #endif
4667         hf &= ~B43_HF_SKCFPUP;
4668         b43_hf_write(dev, hf);
4669
4670         b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT,
4671                              B43_DEFAULT_LONG_RETRY_LIMIT);
4672         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3);
4673         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2);
4674
4675         /* Disable sending probe responses from firmware.
4676          * Setting the MaxTime to one usec will always trigger
4677          * a timeout, so we never send any probe resp.
4678          * A timeout of zero is infinite. */
4679         b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1);
4680
4681         b43_rate_memory_init(dev);
4682         b43_set_phytxctl_defaults(dev);
4683
4684         /* Minimum Contention Window */
4685         if (phy->type == B43_PHYTYPE_B)
4686                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F);
4687         else
4688                 b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF);
4689         /* Maximum Contention Window */
4690         b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
4691
4692         if (b43_bus_host_is_pcmcia(dev->dev) ||
4693             b43_bus_host_is_sdio(dev->dev)) {
4694                 dev->__using_pio_transfers = true;
4695                 err = b43_pio_init(dev);
4696         } else if (dev->use_pio) {
4697                 b43warn(dev->wl, "Forced PIO by use_pio module parameter. "
4698                         "This should not be needed and will result in lower "
4699                         "performance.\n");
4700                 dev->__using_pio_transfers = true;
4701                 err = b43_pio_init(dev);
4702         } else {
4703                 dev->__using_pio_transfers = false;
4704                 err = b43_dma_init(dev);
4705         }
4706         if (err)
4707                 goto err_chip_exit;
4708         b43_qos_init(dev);
4709         b43_set_synth_pu_delay(dev, 1);
4710         b43_bluetooth_coext_enable(dev);
4711
4712         b43_bus_powerup(dev, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
4713         b43_upload_card_macaddress(dev);
4714         b43_security_init(dev);
4715
4716         ieee80211_wake_queues(dev->wl->hw);
4717
4718         b43_set_status(dev, B43_STAT_INITIALIZED);
4719
4720         /* Register HW RNG driver */
4721         b43_rng_init(dev->wl);
4722
4723 out:
4724         return err;
4725
4726 err_chip_exit:
4727         b43_chip_exit(dev);
4728 err_busdown:
4729         b43_bus_may_powerdown(dev);
4730         B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
4731         return err;
4732 }
4733
4734 static int b43_op_add_interface(struct ieee80211_hw *hw,
4735                                 struct ieee80211_vif *vif)
4736 {
4737         struct b43_wl *wl = hw_to_b43_wl(hw);
4738         struct b43_wldev *dev;
4739         int err = -EOPNOTSUPP;
4740
4741         /* TODO: allow WDS/AP devices to coexist */
4742
4743         if (vif->type != NL80211_IFTYPE_AP &&
4744             vif->type != NL80211_IFTYPE_MESH_POINT &&
4745             vif->type != NL80211_IFTYPE_STATION &&
4746             vif->type != NL80211_IFTYPE_WDS &&
4747             vif->type != NL80211_IFTYPE_ADHOC)
4748                 return -EOPNOTSUPP;
4749
4750         mutex_lock(&wl->mutex);
4751         if (wl->operating)
4752                 goto out_mutex_unlock;
4753
4754         b43dbg(wl, "Adding Interface type %d\n", vif->type);
4755
4756         dev = wl->current_dev;
4757         wl->operating = true;
4758         wl->vif = vif;
4759         wl->if_type = vif->type;
4760         memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
4761
4762         b43_adjust_opmode(dev);
4763         b43_set_pretbtt(dev);
4764         b43_set_synth_pu_delay(dev, 0);
4765         b43_upload_card_macaddress(dev);
4766
4767         err = 0;
4768  out_mutex_unlock:
4769         mutex_unlock(&wl->mutex);
4770
4771         if (err == 0)
4772                 b43_op_bss_info_changed(hw, vif, &vif->bss_conf, ~0);
4773
4774         return err;
4775 }
4776
4777 static void b43_op_remove_interface(struct ieee80211_hw *hw,
4778                                     struct ieee80211_vif *vif)
4779 {
4780         struct b43_wl *wl = hw_to_b43_wl(hw);
4781         struct b43_wldev *dev = wl->current_dev;
4782
4783         b43dbg(wl, "Removing Interface type %d\n", vif->type);
4784
4785         mutex_lock(&wl->mutex);
4786
4787         B43_WARN_ON(!wl->operating);
4788         B43_WARN_ON(wl->vif != vif);
4789         wl->vif = NULL;
4790
4791         wl->operating = false;
4792
4793         b43_adjust_opmode(dev);
4794         memset(wl->mac_addr, 0, ETH_ALEN);
4795         b43_upload_card_macaddress(dev);
4796
4797         mutex_unlock(&wl->mutex);
4798 }
4799
4800 static int b43_op_start(struct ieee80211_hw *hw)
4801 {
4802         struct b43_wl *wl = hw_to_b43_wl(hw);
4803         struct b43_wldev *dev = wl->current_dev;
4804         int did_init = 0;
4805         int err = 0;
4806
4807         /* Kill all old instance specific information to make sure
4808          * the card won't use it in the short timeframe between start
4809          * and mac80211 reconfiguring it. */
4810         memset(wl->bssid, 0, ETH_ALEN);
4811         memset(wl->mac_addr, 0, ETH_ALEN);
4812         wl->filter_flags = 0;
4813         wl->radiotap_enabled = false;
4814         b43_qos_clear(wl);
4815         wl->beacon0_uploaded = false;
4816         wl->beacon1_uploaded = false;
4817         wl->beacon_templates_virgin = true;
4818         wl->radio_enabled = true;
4819
4820         mutex_lock(&wl->mutex);
4821
4822         if (b43_status(dev) < B43_STAT_INITIALIZED) {
4823                 err = b43_wireless_core_init(dev);
4824                 if (err)
4825                         goto out_mutex_unlock;
4826                 did_init = 1;
4827         }
4828
4829         if (b43_status(dev) < B43_STAT_STARTED) {
4830                 err = b43_wireless_core_start(dev);
4831                 if (err) {
4832                         if (did_init)
4833                                 b43_wireless_core_exit(dev);
4834                         goto out_mutex_unlock;
4835                 }
4836         }
4837
4838         /* XXX: only do if device doesn't support rfkill irq */
4839         wiphy_rfkill_start_polling(hw->wiphy);
4840
4841  out_mutex_unlock:
4842         mutex_unlock(&wl->mutex);
4843
4844         /*
4845          * Configuration may have been overwritten during initialization.
4846          * Reload the configuration, but only if initialization was
4847          * successful. Reloading the configuration after a failed init
4848          * may hang the system.
4849          */
4850         if (!err)
4851                 b43_op_config(hw, ~0);
4852
4853         return err;
4854 }
4855
4856 static void b43_op_stop(struct ieee80211_hw *hw)
4857 {
4858         struct b43_wl *wl = hw_to_b43_wl(hw);
4859         struct b43_wldev *dev = wl->current_dev;
4860
4861         cancel_work_sync(&(wl->beacon_update_trigger));
4862
4863         if (!dev)
4864                 goto out;
4865
4866         mutex_lock(&wl->mutex);
4867         if (b43_status(dev) >= B43_STAT_STARTED) {
4868                 dev = b43_wireless_core_stop(dev);
4869                 if (!dev)
4870                         goto out_unlock;
4871         }
4872         b43_wireless_core_exit(dev);
4873         wl->radio_enabled = false;
4874
4875 out_unlock:
4876         mutex_unlock(&wl->mutex);
4877 out:
4878         cancel_work_sync(&(wl->txpower_adjust_work));
4879 }
4880
4881 static int b43_op_beacon_set_tim(struct ieee80211_hw *hw,
4882                                  struct ieee80211_sta *sta, bool set)
4883 {
4884         struct b43_wl *wl = hw_to_b43_wl(hw);
4885
4886         /* FIXME: add locking */
4887         b43_update_templates(wl);
4888
4889         return 0;
4890 }
4891
4892 static void b43_op_sta_notify(struct ieee80211_hw *hw,
4893                               struct ieee80211_vif *vif,
4894                               enum sta_notify_cmd notify_cmd,
4895                               struct ieee80211_sta *sta)
4896 {
4897         struct b43_wl *wl = hw_to_b43_wl(hw);
4898
4899         B43_WARN_ON(!vif || wl->vif != vif);
4900 }
4901
4902 static void b43_op_sw_scan_start_notifier(struct ieee80211_hw *hw)
4903 {
4904         struct b43_wl *wl = hw_to_b43_wl(hw);
4905         struct b43_wldev *dev;
4906
4907         mutex_lock(&wl->mutex);
4908         dev = wl->current_dev;
4909         if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) {
4910                 /* Disable CFP update during scan on other channels. */
4911                 b43_hf_write(dev, b43_hf_read(dev) | B43_HF_SKCFPUP);
4912         }
4913         mutex_unlock(&wl->mutex);
4914 }
4915
4916 static void b43_op_sw_scan_complete_notifier(struct ieee80211_hw *hw)
4917 {
4918         struct b43_wl *wl = hw_to_b43_wl(hw);
4919         struct b43_wldev *dev;
4920
4921         mutex_lock(&wl->mutex);
4922         dev = wl->current_dev;
4923         if (dev && (b43_status(dev) >= B43_STAT_INITIALIZED)) {
4924                 /* Re-enable CFP update. */
4925                 b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_SKCFPUP);
4926         }
4927         mutex_unlock(&wl->mutex);
4928 }
4929
4930 static int b43_op_get_survey(struct ieee80211_hw *hw, int idx,
4931                              struct survey_info *survey)
4932 {
4933         struct b43_wl *wl = hw_to_b43_wl(hw);
4934         struct b43_wldev *dev = wl->current_dev;
4935         struct ieee80211_conf *conf = &hw->conf;
4936
4937         if (idx != 0)
4938                 return -ENOENT;
4939
4940         survey->channel = conf->channel;
4941         survey->filled = SURVEY_INFO_NOISE_DBM;
4942         survey->noise = dev->stats.link_noise;
4943
4944         return 0;
4945 }
4946
4947 static const struct ieee80211_ops b43_hw_ops = {
4948         .tx                     = b43_op_tx,
4949         .conf_tx                = b43_op_conf_tx,
4950         .add_interface          = b43_op_add_interface,
4951         .remove_interface       = b43_op_remove_interface,
4952         .config                 = b43_op_config,
4953         .bss_info_changed       = b43_op_bss_info_changed,
4954         .configure_filter       = b43_op_configure_filter,
4955         .set_key                = b43_op_set_key,
4956         .update_tkip_key        = b43_op_update_tkip_key,
4957         .get_stats              = b43_op_get_stats,
4958         .get_tsf                = b43_op_get_tsf,
4959         .set_tsf                = b43_op_set_tsf,
4960         .start                  = b43_op_start,
4961         .stop                   = b43_op_stop,
4962         .set_tim                = b43_op_beacon_set_tim,
4963         .sta_notify             = b43_op_sta_notify,
4964         .sw_scan_start          = b43_op_sw_scan_start_notifier,
4965         .sw_scan_complete       = b43_op_sw_scan_complete_notifier,
4966         .get_survey             = b43_op_get_survey,
4967         .rfkill_poll            = b43_rfkill_poll,
4968 };
4969
4970 /* Hard-reset the chip. Do not call this directly.
4971  * Use b43_controller_restart()
4972  */
4973 static void b43_chip_reset(struct work_struct *work)
4974 {
4975         struct b43_wldev *dev =
4976             container_of(work, struct b43_wldev, restart_work);
4977         struct b43_wl *wl = dev->wl;
4978         int err = 0;
4979         int prev_status;
4980
4981         mutex_lock(&wl->mutex);
4982
4983         prev_status = b43_status(dev);
4984         /* Bring the device down... */
4985         if (prev_status >= B43_STAT_STARTED) {
4986                 dev = b43_wireless_core_stop(dev);
4987                 if (!dev) {
4988                         err = -ENODEV;
4989                         goto out;
4990                 }
4991         }
4992         if (prev_status >= B43_STAT_INITIALIZED)
4993                 b43_wireless_core_exit(dev);
4994
4995         /* ...and up again. */
4996         if (prev_status >= B43_STAT_INITIALIZED) {
4997                 err = b43_wireless_core_init(dev);
4998                 if (err)
4999                         goto out;
5000         }
5001         if (prev_status >= B43_STAT_STARTED) {
5002                 err = b43_wireless_core_start(dev);
5003                 if (err) {
5004                         b43_wireless_core_exit(dev);
5005                         goto out;
5006                 }
5007         }
5008 out:
5009         if (err)
5010                 wl->current_dev = NULL; /* Failed to init the dev. */
5011         mutex_unlock(&wl->mutex);
5012
5013         if (err) {
5014                 b43err(wl, "Controller restart FAILED\n");
5015                 return;
5016         }
5017
5018         /* reload configuration */
5019         b43_op_config(wl->hw, ~0);
5020         if (wl->vif)
5021                 b43_op_bss_info_changed(wl->hw, wl->vif, &wl->vif->bss_conf, ~0);
5022
5023         b43info(wl, "Controller restarted\n");
5024 }
5025
5026 static int b43_setup_bands(struct b43_wldev *dev,
5027                            bool have_2ghz_phy, bool have_5ghz_phy)
5028 {
5029         struct ieee80211_hw *hw = dev->wl->hw;
5030
5031         if (have_2ghz_phy)
5032                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &b43_band_2GHz;
5033         if (dev->phy.type == B43_PHYTYPE_N) {
5034                 if (have_5ghz_phy)
5035                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_nphy;
5036         } else {
5037                 if (have_5ghz_phy)
5038                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &b43_band_5GHz_aphy;
5039         }
5040
5041         dev->phy.supports_2ghz = have_2ghz_phy;
5042         dev->phy.supports_5ghz = have_5ghz_phy;
5043
5044         return 0;
5045 }
5046
5047 static void b43_wireless_core_detach(struct b43_wldev *dev)
5048 {
5049         /* We release firmware that late to not be required to re-request
5050          * is all the time when we reinit the core. */
5051         b43_release_firmware(dev);
5052         b43_phy_free(dev);
5053 }
5054
5055 static int b43_wireless_core_attach(struct b43_wldev *dev)
5056 {
5057         struct b43_wl *wl = dev->wl;
5058         struct pci_dev *pdev = NULL;
5059         int err;
5060         u32 tmp;
5061         bool have_2ghz_phy = false, have_5ghz_phy = false;
5062
5063         /* Do NOT do any device initialization here.
5064          * Do it in wireless_core_init() instead.
5065          * This function is for gathering basic information about the HW, only.
5066          * Also some structs may be set up here. But most likely you want to have
5067          * that in core_init(), too.
5068          */
5069
5070 #ifdef CONFIG_B43_SSB
5071         if (dev->dev->bus_type == B43_BUS_SSB &&
5072             dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI)
5073                 pdev = dev->dev->sdev->bus->host_pci;
5074 #endif
5075
5076         err = b43_bus_powerup(dev, 0);
5077         if (err) {
5078                 b43err(wl, "Bus powerup failed\n");
5079                 goto out;
5080         }
5081
5082         /* Get the PHY type. */
5083         switch (dev->dev->bus_type) {
5084 #ifdef CONFIG_B43_BCMA
5085         case B43_BUS_BCMA:
5086                 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOST);
5087                 have_2ghz_phy = !!(tmp & B43_BCMA_IOST_2G_PHY);
5088                 have_5ghz_phy = !!(tmp & B43_BCMA_IOST_5G_PHY);
5089                 break;
5090 #endif
5091 #ifdef CONFIG_B43_SSB
5092         case B43_BUS_SSB:
5093                 if (dev->dev->core_rev >= 5) {
5094                         tmp = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
5095                         have_2ghz_phy = !!(tmp & B43_TMSHIGH_HAVE_2GHZ_PHY);
5096                         have_5ghz_phy = !!(tmp & B43_TMSHIGH_HAVE_5GHZ_PHY);
5097                 } else
5098                         B43_WARN_ON(1);
5099                 break;
5100 #endif
5101         }
5102
5103         dev->phy.gmode = have_2ghz_phy;
5104         dev->phy.radio_on = true;
5105         b43_wireless_core_reset(dev, dev->phy.gmode);
5106
5107         err = b43_phy_versioning(dev);
5108         if (err)
5109                 goto err_powerdown;
5110         /* Check if this device supports multiband. */
5111         if (!pdev ||
5112             (pdev->device != 0x4312 &&
5113              pdev->device != 0x4319 && pdev->device != 0x4324)) {
5114                 /* No multiband support. */
5115                 have_2ghz_phy = false;
5116                 have_5ghz_phy = false;
5117                 switch (dev->phy.type) {
5118                 case B43_PHYTYPE_A:
5119                         have_5ghz_phy = true;
5120                         break;
5121                 case B43_PHYTYPE_LP: //FIXME not always!
5122 #if 0 //FIXME enabling 5GHz causes a NULL pointer dereference
5123                         have_5ghz_phy = 1;
5124 #endif
5125                 case B43_PHYTYPE_G:
5126                 case B43_PHYTYPE_N:
5127                 case B43_PHYTYPE_HT:
5128                 case B43_PHYTYPE_LCN:
5129                         have_2ghz_phy = true;
5130                         break;
5131                 default:
5132                         B43_WARN_ON(1);
5133                 }
5134         }
5135         if (dev->phy.type == B43_PHYTYPE_A) {
5136                 /* FIXME */
5137                 b43err(wl, "IEEE 802.11a devices are unsupported\n");
5138                 err = -EOPNOTSUPP;
5139                 goto err_powerdown;
5140         }
5141         if (1 /* disable A-PHY */) {
5142                 /* FIXME: For now we disable the A-PHY on multi-PHY devices. */
5143                 if (dev->phy.type != B43_PHYTYPE_N &&
5144                     dev->phy.type != B43_PHYTYPE_LP) {
5145                         have_2ghz_phy = true;
5146                         have_5ghz_phy = false;
5147                 }
5148         }
5149
5150         err = b43_phy_allocate(dev);
5151         if (err)
5152                 goto err_powerdown;
5153
5154         dev->phy.gmode = have_2ghz_phy;
5155         b43_wireless_core_reset(dev, dev->phy.gmode);
5156
5157         err = b43_validate_chipaccess(dev);
5158         if (err)
5159                 goto err_phy_free;
5160         err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy);
5161         if (err)
5162                 goto err_phy_free;
5163
5164         /* Now set some default "current_dev" */
5165         if (!wl->current_dev)
5166                 wl->current_dev = dev;
5167         INIT_WORK(&dev->restart_work, b43_chip_reset);
5168
5169         dev->phy.ops->switch_analog(dev, 0);
5170         b43_device_disable(dev, 0);
5171         b43_bus_may_powerdown(dev);
5172
5173 out:
5174         return err;
5175
5176 err_phy_free:
5177         b43_phy_free(dev);
5178 err_powerdown:
5179         b43_bus_may_powerdown(dev);
5180         return err;
5181 }
5182
5183 static void b43_one_core_detach(struct b43_bus_dev *dev)
5184 {
5185         struct b43_wldev *wldev;
5186         struct b43_wl *wl;
5187
5188         /* Do not cancel ieee80211-workqueue based work here.
5189          * See comment in b43_remove(). */
5190
5191         wldev = b43_bus_get_wldev(dev);
5192         wl = wldev->wl;
5193         b43_debugfs_remove_device(wldev);
5194         b43_wireless_core_detach(wldev);
5195         list_del(&wldev->list);
5196         wl->nr_devs--;
5197         b43_bus_set_wldev(dev, NULL);
5198         kfree(wldev);
5199 }
5200
5201 static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl)
5202 {
5203         struct b43_wldev *wldev;
5204         int err = -ENOMEM;
5205
5206         wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
5207         if (!wldev)
5208                 goto out;
5209
5210         wldev->use_pio = b43_modparam_pio;
5211         wldev->dev = dev;
5212         wldev->wl = wl;
5213         b43_set_status(wldev, B43_STAT_UNINIT);
5214         wldev->bad_frames_preempt = modparam_bad_frames_preempt;
5215         INIT_LIST_HEAD(&wldev->list);
5216
5217         err = b43_wireless_core_attach(wldev);
5218         if (err)
5219                 goto err_kfree_wldev;
5220
5221         list_add(&wldev->list, &wl->devlist);
5222         wl->nr_devs++;
5223         b43_bus_set_wldev(dev, wldev);
5224         b43_debugfs_add_device(wldev);
5225
5226       out:
5227         return err;
5228
5229       err_kfree_wldev:
5230         kfree(wldev);
5231         return err;
5232 }
5233
5234 #define IS_PDEV(pdev, _vendor, _device, _subvendor, _subdevice)         ( \
5235         (pdev->vendor == PCI_VENDOR_ID_##_vendor) &&                    \
5236         (pdev->device == _device) &&                                    \
5237         (pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) &&       \
5238         (pdev->subsystem_device == _subdevice)                          )
5239
5240 static void b43_sprom_fixup(struct ssb_bus *bus)
5241 {
5242         struct pci_dev *pdev;
5243
5244         /* boardflags workarounds */
5245         if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
5246             bus->chip_id == 0x4301 && bus->sprom.board_rev == 0x74)
5247                 bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
5248         if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
5249             bus->boardinfo.type == 0x4E && bus->sprom.board_rev > 0x40)
5250                 bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
5251         if (bus->bustype == SSB_BUSTYPE_PCI) {
5252                 pdev = bus->host_pci;
5253                 if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
5254                     IS_PDEV(pdev, BROADCOM, 0x4320,    DELL, 0x0003) ||
5255                     IS_PDEV(pdev, BROADCOM, 0x4320,      HP, 0x12f8) ||
5256                     IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
5257                     IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
5258                     IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) ||
5259                     IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010))
5260                         bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
5261         }
5262 }
5263
5264 static void b43_wireless_exit(struct b43_bus_dev *dev, struct b43_wl *wl)
5265 {
5266         struct ieee80211_hw *hw = wl->hw;
5267
5268         ssb_set_devtypedata(dev->sdev, NULL);
5269         ieee80211_free_hw(hw);
5270 }
5271
5272 static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
5273 {
5274         struct ssb_sprom *sprom = dev->bus_sprom;
5275         struct ieee80211_hw *hw;
5276         struct b43_wl *wl;
5277         char chip_name[6];
5278         int queue_num;
5279
5280         hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops);
5281         if (!hw) {
5282                 b43err(NULL, "Could not allocate ieee80211 device\n");
5283                 return ERR_PTR(-ENOMEM);
5284         }
5285         wl = hw_to_b43_wl(hw);
5286
5287         /* fill hw info */
5288         hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
5289                     IEEE80211_HW_SIGNAL_DBM;
5290
5291         hw->wiphy->interface_modes =
5292                 BIT(NL80211_IFTYPE_AP) |
5293                 BIT(NL80211_IFTYPE_MESH_POINT) |
5294                 BIT(NL80211_IFTYPE_STATION) |
5295                 BIT(NL80211_IFTYPE_WDS) |
5296                 BIT(NL80211_IFTYPE_ADHOC);
5297
5298         hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
5299
5300         hw->queues = modparam_qos ? B43_QOS_QUEUE_NUM : 1;
5301         wl->mac80211_initially_registered_queues = hw->queues;
5302         hw->max_rates = 2;
5303         SET_IEEE80211_DEV(hw, dev->dev);
5304         if (is_valid_ether_addr(sprom->et1mac))
5305                 SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
5306         else
5307                 SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
5308
5309         /* Initialize struct b43_wl */
5310         wl->hw = hw;
5311         mutex_init(&wl->mutex);
5312         spin_lock_init(&wl->hardirq_lock);
5313         INIT_LIST_HEAD(&wl->devlist);
5314         INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
5315         INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work);
5316         INIT_WORK(&wl->tx_work, b43_tx_work);
5317
5318         /* Initialize queues and flags. */
5319         for (queue_num = 0; queue_num < B43_QOS_QUEUE_NUM; queue_num++) {
5320                 skb_queue_head_init(&wl->tx_queue[queue_num]);
5321                 wl->tx_queue_stopped[queue_num] = 0;
5322         }
5323
5324         snprintf(chip_name, ARRAY_SIZE(chip_name),
5325                  (dev->chip_id > 0x9999) ? "%d" : "%04X", dev->chip_id);
5326         b43info(wl, "Broadcom %s WLAN found (core revision %u)\n", chip_name,
5327                 dev->core_rev);
5328         return wl;
5329 }
5330
5331 #ifdef CONFIG_B43_BCMA
5332 static int b43_bcma_probe(struct bcma_device *core)
5333 {
5334         struct b43_bus_dev *dev;
5335         struct b43_wl *wl;
5336         int err;
5337
5338         dev = b43_bus_dev_bcma_init(core);
5339         if (!dev)
5340                 return -ENODEV;
5341
5342         wl = b43_wireless_init(dev);
5343         if (IS_ERR(wl)) {
5344                 err = PTR_ERR(wl);
5345                 goto bcma_out;
5346         }
5347
5348         err = b43_one_core_attach(dev, wl);
5349         if (err)
5350                 goto bcma_err_wireless_exit;
5351
5352         /* setup and start work to load firmware */
5353         INIT_WORK(&wl->firmware_load, b43_request_firmware);
5354         schedule_work(&wl->firmware_load);
5355
5356 bcma_out:
5357         return err;
5358
5359 bcma_err_wireless_exit:
5360         ieee80211_free_hw(wl->hw);
5361         return err;
5362 }
5363
5364 static void b43_bcma_remove(struct bcma_device *core)
5365 {
5366         struct b43_wldev *wldev = bcma_get_drvdata(core);
5367         struct b43_wl *wl = wldev->wl;
5368
5369         /* We must cancel any work here before unregistering from ieee80211,
5370          * as the ieee80211 unreg will destroy the workqueue. */
5371         cancel_work_sync(&wldev->restart_work);
5372
5373         /* Restore the queues count before unregistering, because firmware detect
5374          * might have modified it. Restoring is important, so the networking
5375          * stack can properly free resources. */
5376         wl->hw->queues = wl->mac80211_initially_registered_queues;
5377         b43_leds_stop(wldev);
5378         ieee80211_unregister_hw(wl->hw);
5379
5380         b43_one_core_detach(wldev->dev);
5381
5382         b43_leds_unregister(wl);
5383
5384         ieee80211_free_hw(wl->hw);
5385 }
5386
5387 static struct bcma_driver b43_bcma_driver = {
5388         .name           = KBUILD_MODNAME,
5389         .id_table       = b43_bcma_tbl,
5390         .probe          = b43_bcma_probe,
5391         .remove         = b43_bcma_remove,
5392 };
5393 #endif
5394
5395 #ifdef CONFIG_B43_SSB
5396 static
5397 int b43_ssb_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
5398 {
5399         struct b43_bus_dev *dev;
5400         struct b43_wl *wl;
5401         int err;
5402         int first = 0;
5403
5404         dev = b43_bus_dev_ssb_init(sdev);
5405         if (!dev)
5406                 return -ENOMEM;
5407
5408         wl = ssb_get_devtypedata(sdev);
5409         if (!wl) {
5410                 /* Probing the first core. Must setup common struct b43_wl */
5411                 first = 1;
5412                 b43_sprom_fixup(sdev->bus);
5413                 wl = b43_wireless_init(dev);
5414                 if (IS_ERR(wl)) {
5415                         err = PTR_ERR(wl);
5416                         goto out;
5417                 }
5418                 ssb_set_devtypedata(sdev, wl);
5419                 B43_WARN_ON(ssb_get_devtypedata(sdev) != wl);
5420         }
5421         err = b43_one_core_attach(dev, wl);
5422         if (err)
5423                 goto err_wireless_exit;
5424
5425         /* setup and start work to load firmware */
5426         INIT_WORK(&wl->firmware_load, b43_request_firmware);
5427         schedule_work(&wl->firmware_load);
5428
5429       out:
5430         return err;
5431
5432       err_wireless_exit:
5433         if (first)
5434                 b43_wireless_exit(dev, wl);
5435         return err;
5436 }
5437
5438 static void b43_ssb_remove(struct ssb_device *sdev)
5439 {
5440         struct b43_wl *wl = ssb_get_devtypedata(sdev);
5441         struct b43_wldev *wldev = ssb_get_drvdata(sdev);
5442         struct b43_bus_dev *dev = wldev->dev;
5443
5444         /* We must cancel any work here before unregistering from ieee80211,
5445          * as the ieee80211 unreg will destroy the workqueue. */
5446         cancel_work_sync(&wldev->restart_work);
5447
5448         B43_WARN_ON(!wl);
5449         if (wl->current_dev == wldev) {
5450                 /* Restore the queues count before unregistering, because firmware detect
5451                  * might have modified it. Restoring is important, so the networking
5452                  * stack can properly free resources. */
5453                 wl->hw->queues = wl->mac80211_initially_registered_queues;
5454                 b43_leds_stop(wldev);
5455                 ieee80211_unregister_hw(wl->hw);
5456         }
5457
5458         b43_one_core_detach(dev);
5459
5460         if (list_empty(&wl->devlist)) {
5461                 b43_leds_unregister(wl);
5462                 /* Last core on the chip unregistered.
5463                  * We can destroy common struct b43_wl.
5464                  */
5465                 b43_wireless_exit(dev, wl);
5466         }
5467 }
5468
5469 static struct ssb_driver b43_ssb_driver = {
5470         .name           = KBUILD_MODNAME,
5471         .id_table       = b43_ssb_tbl,
5472         .probe          = b43_ssb_probe,
5473         .remove         = b43_ssb_remove,
5474 };
5475 #endif /* CONFIG_B43_SSB */
5476
5477 /* Perform a hardware reset. This can be called from any context. */
5478 void b43_controller_restart(struct b43_wldev *dev, const char *reason)
5479 {
5480         /* Must avoid requeueing, if we are in shutdown. */
5481         if (b43_status(dev) < B43_STAT_INITIALIZED)
5482                 return;
5483         b43info(dev->wl, "Controller RESET (%s) ...\n", reason);
5484         ieee80211_queue_work(dev->wl->hw, &dev->restart_work);
5485 }
5486
5487 static void b43_print_driverinfo(void)
5488 {
5489         const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
5490                    *feat_leds = "", *feat_sdio = "";
5491
5492 #ifdef CONFIG_B43_PCI_AUTOSELECT
5493         feat_pci = "P";
5494 #endif
5495 #ifdef CONFIG_B43_PCMCIA
5496         feat_pcmcia = "M";
5497 #endif
5498 #ifdef CONFIG_B43_PHY_N
5499         feat_nphy = "N";
5500 #endif
5501 #ifdef CONFIG_B43_LEDS
5502         feat_leds = "L";
5503 #endif
5504 #ifdef CONFIG_B43_SDIO
5505         feat_sdio = "S";
5506 #endif
5507         printk(KERN_INFO "Broadcom 43xx driver loaded "
5508                "[ Features: %s%s%s%s%s ]\n",
5509                feat_pci, feat_pcmcia, feat_nphy,
5510                feat_leds, feat_sdio);
5511 }
5512
5513 static int __init b43_init(void)
5514 {
5515         int err;
5516
5517         b43_debugfs_init();
5518         err = b43_pcmcia_init();
5519         if (err)
5520                 goto err_dfs_exit;
5521         err = b43_sdio_init();
5522         if (err)
5523                 goto err_pcmcia_exit;
5524 #ifdef CONFIG_B43_BCMA
5525         err = bcma_driver_register(&b43_bcma_driver);
5526         if (err)
5527                 goto err_sdio_exit;
5528 #endif
5529 #ifdef CONFIG_B43_SSB
5530         err = ssb_driver_register(&b43_ssb_driver);
5531         if (err)
5532                 goto err_bcma_driver_exit;
5533 #endif
5534         b43_print_driverinfo();
5535
5536         return err;
5537
5538 #ifdef CONFIG_B43_SSB
5539 err_bcma_driver_exit:
5540 #endif
5541 #ifdef CONFIG_B43_BCMA
5542         bcma_driver_unregister(&b43_bcma_driver);
5543 err_sdio_exit:
5544 #endif
5545         b43_sdio_exit();
5546 err_pcmcia_exit:
5547         b43_pcmcia_exit();
5548 err_dfs_exit:
5549         b43_debugfs_exit();
5550         return err;
5551 }
5552
5553 static void __exit b43_exit(void)
5554 {
5555 #ifdef CONFIG_B43_SSB
5556         ssb_driver_unregister(&b43_ssb_driver);
5557 #endif
5558 #ifdef CONFIG_B43_BCMA
5559         bcma_driver_unregister(&b43_bcma_driver);
5560 #endif
5561         b43_sdio_exit();
5562         b43_pcmcia_exit();
5563         b43_debugfs_exit();
5564 }
5565
5566 module_init(b43_init)
5567 module_exit(b43_exit)