x86, gcc-4.6: Fix set but not read variables
[firefly-linux-kernel-4.4.55.git] / drivers / net / wimax / i2400m / i2400m-usb.h
1 /*
2  * Intel Wireless WiMAX Connection 2400m
3  * USB-specific i2400m driver definitions
4  *
5  *
6  * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  *
12  *   * Redistributions of source code must retain the above copyright
13  *     notice, this list of conditions and the following disclaimer.
14  *   * Redistributions in binary form must reproduce the above copyright
15  *     notice, this list of conditions and the following disclaimer in
16  *     the documentation and/or other materials provided with the
17  *     distribution.
18  *   * Neither the name of Intel Corporation nor the names of its
19  *     contributors may be used to endorse or promote products derived
20  *     from this software without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
25  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
27  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
28  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
32  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33  *
34  *
35  * Intel Corporation <linux-wimax@intel.com>
36  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
37  * Yanir Lubetkin <yanirx.lubetkin@intel.com>
38  *  - Initial implementation
39  *
40  *
41  * This driver implements the bus-specific part of the i2400m for
42  * USB. Check i2400m.h for a generic driver description.
43  *
44  * ARCHITECTURE
45  *
46  * This driver listens to notifications sent from the notification
47  * endpoint (in usb-notif.c); when data is ready to read, the code in
48  * there schedules a read from the device (usb-rx.c) and then passes
49  * the data to the generic RX code (rx.c).
50  *
51  * When the generic driver needs to send data (network or control), it
52  * queues up in the TX FIFO (tx.c) and that will notify the driver
53  * through the i2400m->bus_tx_kick() callback
54  * (usb-tx.c:i2400mu_bus_tx_kick) which will send the items in the
55  * FIFO queue.
56  *
57  * This driver, as well, implements the USB-specific ops for the generic
58  * driver to be able to setup/teardown communication with the device
59  * [i2400m_bus_dev_start() and i2400m_bus_dev_stop()], reseting the
60  * device [i2400m_bus_reset()] and performing firmware upload
61  * [i2400m_bus_bm_cmd() and i2400_bus_bm_wait_for_ack()].
62  */
63
64 #ifndef __I2400M_USB_H__
65 #define __I2400M_USB_H__
66
67 #include "i2400m.h"
68 #include <linux/kthread.h>
69
70
71 /*
72  * Error Density Count: cheapo error density (over time) counter
73  *
74  * Originally by Reinette Chatre <reinette.chatre@intel.com>
75  *
76  * Embed an 'struct edc' somewhere. Each time there is a soft or
77  * retryable error, call edc_inc() and check if the error top
78  * watermark has been reached.
79  */
80 enum {
81         EDC_MAX_ERRORS = 10,
82         EDC_ERROR_TIMEFRAME = HZ,
83 };
84
85 /* error density counter */
86 struct edc {
87         unsigned long timestart;
88         u16 errorcount;
89 };
90
91 struct i2400m_endpoint_cfg {
92         unsigned char bulk_out;
93         unsigned char notification;
94         unsigned char reset_cold;
95         unsigned char bulk_in;
96 };
97
98 static inline void edc_init(struct edc *edc)
99 {
100         edc->timestart = jiffies;
101 }
102
103 /**
104  * edc_inc - report a soft error and check if we are over the watermark
105  *
106  * @edc: pointer to error density counter.
107  * @max_err: maximum number of errors we can accept over the timeframe
108  * @timeframe: lenght of the timeframe (in jiffies).
109  *
110  * Returns: !0 1 if maximum acceptable errors per timeframe has been
111  *     exceeded. 0 otherwise.
112  *
113  * This is way to determine if the number of acceptable errors per time
114  * period has been exceeded. It is not accurate as there are cases in which
115  * this scheme will not work, for example if there are periodic occurences
116  * of errors that straddle updates to the start time. This scheme is
117  * sufficient for our usage.
118  *
119  * To use, embed a 'struct edc' somewhere, initialize it with
120  * edc_init() and when an error hits:
121  *
122  * if (do_something_fails_with_a_soft_error) {
123  *        if (edc_inc(&my->edc, MAX_ERRORS, MAX_TIMEFRAME))
124  *                 Ops, hard error, do something about it
125  *        else
126  *                 Retry or ignore, depending on whatever
127  * }
128  */
129 static inline int edc_inc(struct edc *edc, u16 max_err, u16 timeframe)
130 {
131         unsigned long now;
132
133         now = jiffies;
134         if (now - edc->timestart > timeframe) {
135                 edc->errorcount = 1;
136                 edc->timestart = now;
137         } else if (++edc->errorcount > max_err) {
138                 edc->errorcount = 0;
139                 edc->timestart = now;
140                 return 1;
141         }
142         return 0;
143 }
144
145 /* Host-Device interface for USB */
146 enum {
147         I2400M_USB_BOOT_RETRIES = 3,
148         I2400MU_MAX_NOTIFICATION_LEN = 256,
149         I2400MU_BLK_SIZE = 16,
150         I2400MU_PL_SIZE_MAX = 0x3EFF,
151
152         /* Device IDs */
153         USB_DEVICE_ID_I6050 = 0x0186,
154         USB_DEVICE_ID_I6050_2 = 0x0188,
155 };
156
157
158 /**
159  * struct i2400mu - descriptor for a USB connected i2400m
160  *
161  * @i2400m: bus-generic i2400m implementation; has to be first (see
162  *     it's documentation in i2400m.h).
163  *
164  * @usb_dev: pointer to our USB device
165  *
166  * @usb_iface: pointer to our USB interface
167  *
168  * @urb_edc: error density counter; used to keep a density-on-time tab
169  *     on how many soft (retryable or ignorable) errors we get. If we
170  *     go over the threshold, we consider the bus transport is failing
171  *     too much and reset.
172  *
173  * @notif_urb: URB for receiving notifications from the device.
174  *
175  * @tx_kthread: thread we use for data TX. We use a thread because in
176  *     order to do deep power saving and put the device to sleep, we
177  *     need to call usb_autopm_*() [blocking functions].
178  *
179  * @tx_wq: waitqueue for the TX kthread to sleep when there is no data
180  *     to be sent; when more data is available, it is woken up by
181  *     i2400mu_bus_tx_kick().
182  *
183  * @rx_kthread: thread we use for data RX. We use a thread because in
184  *     order to do deep power saving and put the device to sleep, we
185  *     need to call usb_autopm_*() [blocking functions].
186  *
187  * @rx_wq: waitqueue for the RX kthread to sleep when there is no data
188  *     to receive. When data is available, it is woken up by
189  *     usb-notif.c:i2400mu_notification_grok().
190  *
191  * @rx_pending_count: number of rx-data-ready notifications that were
192  *     still not handled by the RX kthread.
193  *
194  * @rx_size: current RX buffer size that is being used.
195  *
196  * @rx_size_acc: accumulator of the sizes of the previous read
197  *     transactions.
198  *
199  * @rx_size_cnt: number of read transactions accumulated in
200  *     @rx_size_acc.
201  *
202  * @do_autopm: disable(0)/enable(>0) calling the
203  *     usb_autopm_get/put_interface() barriers when executing
204  *     commands. See doc in i2400mu_suspend() for more information.
205  *
206  * @rx_size_auto_shrink: if true, the rx_size is shrinked
207  *     automatically based on the average size of the received
208  *     transactions. This allows the receive code to allocate smaller
209  *     chunks of memory and thus reduce pressure on the memory
210  *     allocator by not wasting so much space. By default it is
211  *     enabled.
212  *
213  * @debugfs_dentry: hookup for debugfs files.
214  *     These have to be in a separate directory, a child of
215  *     (wimax_dev->debugfs_dentry) so they can be removed when the
216  *     module unloads, as we don't keep each dentry.
217  */
218 struct i2400mu {
219         struct i2400m i2400m;           /* FIRST! See doc */
220
221         struct usb_device *usb_dev;
222         struct usb_interface *usb_iface;
223         struct edc urb_edc;             /* Error density counter */
224         struct i2400m_endpoint_cfg endpoint_cfg;
225
226         struct urb *notif_urb;
227         struct task_struct *tx_kthread;
228         wait_queue_head_t tx_wq;
229
230         struct task_struct *rx_kthread;
231         wait_queue_head_t rx_wq;
232         atomic_t rx_pending_count;
233         size_t rx_size, rx_size_acc, rx_size_cnt;
234         atomic_t do_autopm;
235         u8 rx_size_auto_shrink;
236
237         struct dentry *debugfs_dentry;
238         unsigned i6050:1;       /* 1 if this is a 6050 based SKU */
239 };
240
241
242 static inline
243 void i2400mu_init(struct i2400mu *i2400mu)
244 {
245         i2400m_init(&i2400mu->i2400m);
246         edc_init(&i2400mu->urb_edc);
247         init_waitqueue_head(&i2400mu->tx_wq);
248         atomic_set(&i2400mu->rx_pending_count, 0);
249         init_waitqueue_head(&i2400mu->rx_wq);
250         i2400mu->rx_size = PAGE_SIZE - sizeof(struct skb_shared_info);
251         atomic_set(&i2400mu->do_autopm, 1);
252         i2400mu->rx_size_auto_shrink = 1;
253 }
254
255 extern int i2400mu_notification_setup(struct i2400mu *);
256 extern void i2400mu_notification_release(struct i2400mu *);
257
258 extern int i2400mu_rx_setup(struct i2400mu *);
259 extern void i2400mu_rx_release(struct i2400mu *);
260 extern void i2400mu_rx_kick(struct i2400mu *);
261
262 extern int i2400mu_tx_setup(struct i2400mu *);
263 extern void i2400mu_tx_release(struct i2400mu *);
264 extern void i2400mu_bus_tx_kick(struct i2400m *);
265
266 extern ssize_t i2400mu_bus_bm_cmd_send(struct i2400m *,
267                                        const struct i2400m_bootrom_header *,
268                                        size_t, int);
269 extern ssize_t i2400mu_bus_bm_wait_for_ack(struct i2400m *,
270                                            struct i2400m_bootrom_header *,
271                                            size_t);
272 #endif /* #ifndef __I2400M_USB_H__ */