1 /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
2 * Xircom CreditCard Ethernet Adapter IIps driver
3 * Xircom Realport 10/100 (RE-100) driver
5 * This driver supports various Xircom CreditCard Ethernet adapters
6 * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
7 * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
9 * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
10 * autodetect the media properly. In this case use the
11 * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
12 * to force the media type.
14 * Written originally by Werner Koch based on David Hinds' skeleton of the
17 * Copyright (c) 1997,1998 Werner Koch (dd9jn)
19 * This driver is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * It is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
34 * ALTERNATIVELY, this driver may be distributed under the terms of
35 * the following license, in which case the provisions of this license
36 * are required INSTEAD OF the GNU General Public License. (This clause
37 * is necessary due to a potential bad interaction between the GPL and
38 * the restrictions contained in a BSD-style copyright.)
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, and the entire permission notice in its entirety,
45 * including the disclaimer of warranties.
46 * 2. Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in the
48 * documentation and/or other materials provided with the distribution.
49 * 3. The name of the author may not be used to endorse or promote
50 * products derived from this software without specific prior
53 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
54 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
55 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
56 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
57 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
58 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
59 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
61 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
62 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
63 * OF THE POSSIBILITY OF SUCH DAMAGE.
66 #include <linux/module.h>
67 #include <linux/kernel.h>
68 #include <linux/init.h>
69 #include <linux/ptrace.h>
70 #include <linux/slab.h>
71 #include <linux/string.h>
72 #include <linux/timer.h>
73 #include <linux/interrupt.h>
75 #include <linux/delay.h>
76 #include <linux/ethtool.h>
77 #include <linux/netdevice.h>
78 #include <linux/etherdevice.h>
79 #include <linux/skbuff.h>
80 #include <linux/if_arp.h>
81 #include <linux/ioport.h>
82 #include <linux/bitops.h>
83 #include <linux/mii.h>
85 #include <pcmcia/cs_types.h>
86 #include <pcmcia/cs.h>
87 #include <pcmcia/cistpl.h>
88 #include <pcmcia/cisreg.h>
89 #include <pcmcia/ciscode.h>
92 #include <asm/system.h>
93 #include <asm/uaccess.h>
96 #define MANFID_COMPAQ 0x0138
97 #define MANFID_COMPAQ2 0x0183 /* is this correct? */
100 #include <pcmcia/ds.h>
102 /* Time in jiffies before concluding Tx hung */
103 #define TX_TIMEOUT ((400*HZ)/1000)
106 * Some constants used to access the hardware
109 /* Register offsets and value constans */
110 #define XIRCREG_CR 0 /* Command register (wr) */
112 TransmitPacket = 0x01,
120 #define XIRCREG_ESR 0 /* Ethernet status register (rd) */
122 FullPktRcvd = 0x01, /* full packet in receive buffer */
123 PktRejected = 0x04, /* a packet has been rejected */
124 TxPktPend = 0x08, /* TX Packet Pending */
125 IncorPolarity = 0x10,
126 MediaSelect = 0x20 /* set if TP, clear if AUI */
128 #define XIRCREG_PR 1 /* Page Register select */
129 #define XIRCREG_EDP 4 /* Ethernet Data Port Register */
130 #define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */
132 TxBufOvr = 0x01, /* TX Buffer Overflow */
133 PktTxed = 0x02, /* Packet Transmitted */
134 MACIntr = 0x04, /* MAC Interrupt occurred */
135 TxResGrant = 0x08, /* Tx Reservation Granted */
136 RxFullPkt = 0x20, /* Rx Full Packet */
137 RxPktRej = 0x40, /* Rx Packet Rejected */
138 ForcedIntr= 0x80 /* Forced Interrupt */
140 #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
141 #define XIRCREG1_IMR1 13
142 #define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/
143 #define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/
144 #define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */
145 #define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */
147 PhyPkt = 0x01, /* set:physical packet, clear: multicast packet */
148 BrdcstPkt = 0x02, /* set if it is a broadcast packet */
149 PktTooLong = 0x04, /* set if packet length > 1518 */
150 AlignErr = 0x10, /* incorrect CRC and last octet not complete */
151 CRCErr = 0x20, /* incorrect CRC and last octet is complete */
152 PktRxOk = 0x80 /* received ok */
154 #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
155 #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
156 #define XIRCREG1_ECR 14 /* ethernet configurationn register */
158 FullDuplex = 0x04, /* enable full duplex mode */
159 LongTPMode = 0x08, /* adjust for longer lengths of TP cable */
160 DisablePolCor = 0x10,/* disable auto polarity correction */
161 DisableLinkPulse = 0x20, /* disable link pulse generation */
162 DisableAutoTx = 0x40, /* disable auto-transmit */
164 #define XIRCREG2_RBS 8 /* receive buffer start register */
165 #define XIRCREG2_LED 10 /* LED Configuration register */
166 /* values for the leds: Bits 2-0 for led 1
167 * 0 disabled Bits 5-3 for led 2
176 #define XIRCREG2_MSR 12 /* Mohawk specific register */
178 #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
179 #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
180 #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
181 #define XIRCREG4_BOV 10 /* Bonding Version Register */
182 #define XIRCREG4_LMA 12 /* Local Memory Address Register */
183 #define XIRCREG4_LMD 14 /* Local Memory Data Port */
184 /* MAC register can only by accessed with 8 bit operations */
185 #define XIRCREG40_CMD0 8 /* Command Register (wr) */
186 enum xirc_cmd { /* Commands */
195 #define XIRCREG5_RHSA0 10 /* Rx Host Start Address */
196 #define XIRCREG40_RXST0 9 /* Receive Status Register */
197 #define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */
198 #define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */
199 #define XIRCREG40_RMASK0 13 /* Receive Mask Register */
200 #define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */
201 #define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */
202 #define XIRCREG42_SWC0 8 /* Software Configuration 0 */
203 #define XIRCREG42_SWC1 9 /* Software Configuration 1 */
204 #define XIRCREG42_BOC 10 /* Back-Off Configuration */
205 #define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */
206 #define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */
207 #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
208 #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
209 #define XIRCREG45_REV 15 /* Revision Register (rd) */
210 #define XIRCREG50_IA 8 /* Individual Address (8-13) */
212 static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
215 * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
216 * you do not define PCMCIA_DEBUG at all, all the debug code will be
217 * left out. If you compile with PCMCIA_DEBUG=0, the debug code will
218 * be present but disabled -- but it can then be enabled for specific
219 * modules at load time with a 'pc_debug=#' option to insmod.
222 static int pc_debug = PCMCIA_DEBUG;
223 module_param(pc_debug, int, 0);
224 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KDBG_XIRC args)
226 #define DEBUG(n, args...)
229 #define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
230 #define KERR_XIRC KERN_ERR "xirc2ps_cs: "
231 #define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
232 #define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
233 #define KINF_XIRC KERN_INFO "xirc2ps_cs: "
236 #define XIR_UNKNOWN 0 /* unknown: not supported */
237 #define XIR_CE 1 /* (prodid 1) different hardware: not supported */
238 #define XIR_CE2 2 /* (prodid 2) */
239 #define XIR_CE3 3 /* (prodid 3) */
240 #define XIR_CEM 4 /* (prodid 1) different hardware: not supported */
241 #define XIR_CEM2 5 /* (prodid 2) */
242 #define XIR_CEM3 6 /* (prodid 3) */
243 #define XIR_CEM33 7 /* (prodid 4) */
244 #define XIR_CEM56M 8 /* (prodid 5) */
245 #define XIR_CEM56 9 /* (prodid 6) */
246 #define XIR_CM28 10 /* (prodid 3) modem only: not supported here */
247 #define XIR_CM33 11 /* (prodid 4) modem only: not supported here */
248 #define XIR_CM56 12 /* (prodid 5) modem only: not supported here */
249 #define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */
250 #define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */
251 /*====================================================================*/
253 /* Module parameters */
255 MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
256 MODULE_LICENSE("Dual MPL/GPL");
258 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
260 INT_MODULE_PARM(if_port, 0);
261 INT_MODULE_PARM(full_duplex, 0);
262 INT_MODULE_PARM(do_sound, 1);
263 INT_MODULE_PARM(lockup_hack, 0); /* anti lockup hack */
265 /*====================================================================*/
267 /* We do not process more than these number of bytes during one
268 * interrupt. (Of course we receive complete packets, so this is not
270 * Something between 2000..22000; first value gives best interrupt latency,
271 * the second enables the usage of the complete on-chip buffer. We use the
272 * high value as the initial value.
274 static unsigned maxrx_bytes = 22000;
276 /* MII management prototypes */
277 static void mii_idle(unsigned int ioaddr);
278 static void mii_putbit(unsigned int ioaddr, unsigned data);
279 static int mii_getbit(unsigned int ioaddr);
280 static void mii_wbits(unsigned int ioaddr, unsigned data, int len);
281 static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg);
282 static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg,
283 unsigned data, int len);
286 * The event() function is this driver's Card Services event handler.
287 * It will be called by Card Services when an appropriate card status
288 * event is received. The config() and release() entry points are
289 * used to configure or release a socket, in response to card insertion
290 * and ejection events. They are invoked from the event handler.
293 static int has_ce2_string(struct pcmcia_device * link);
294 static int xirc2ps_config(struct pcmcia_device * link);
295 static void xirc2ps_release(struct pcmcia_device * link);
298 * The attach() and detach() entry points are used to create and destroy
299 * "instances" of the driver, where each instance represents everything
300 * needed to manage one actual PCMCIA card.
303 static void xirc2ps_detach(struct pcmcia_device *p_dev);
306 * You'll also need to prototype all the functions that will actually
307 * be used to talk to your device. See 'pcmem_cs' for a good example
308 * of a fully self-sufficient driver; the other drivers rely more or
309 * less on other parts of the kernel.
312 static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
315 * A linked list of "instances" of the device. Each actual
316 * PCMCIA card corresponds to one device instance, and is described
317 * by one struct pcmcia_device structure (defined in ds.h).
319 * You may not want to use a linked list for this -- for example, the
320 * memory card driver uses an array of struct pcmcia_device pointers, where minor
321 * device numbers are used to derive the corresponding array index.
325 * A driver needs to provide a dev_node_t structure for each device
326 * on a card. In some cases, there is only one device per card (for
327 * example, ethernet cards, modems). In other cases, there may be
328 * many actual or logical devices (SCSI adapters, memory cards with
329 * multiple partitions). The dev_node_t structures need to be kept
330 * in a linked list starting at the 'dev' field of a struct pcmcia_device
331 * structure. We allocate them in the card's private data structure,
332 * because they generally can't be allocated dynamically.
335 typedef struct local_info_t {
336 struct net_device *dev;
337 struct pcmcia_device *p_dev;
342 int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
343 int mohawk; /* a CE3 type card */
344 int dingo; /* a CEM56 type card */
345 int new_mii; /* has full 10baseT/100baseT MII */
346 int modem; /* is a multi function card (i.e with a modem) */
347 void __iomem *dingo_ccr; /* only used for CEM56 cards */
348 unsigned last_ptr_value; /* last packets transmitted value */
349 const char *manf_str;
350 struct work_struct tx_timeout_task;
354 * Some more prototypes
356 static netdev_tx_t do_start_xmit(struct sk_buff *skb,
357 struct net_device *dev);
358 static void xirc_tx_timeout(struct net_device *dev);
359 static void xirc2ps_tx_timeout_task(struct work_struct *work);
360 static void set_addresses(struct net_device *dev);
361 static void set_multicast_list(struct net_device *dev);
362 static int set_card_type(struct pcmcia_device *link, const void *s);
363 static int do_config(struct net_device *dev, struct ifmap *map);
364 static int do_open(struct net_device *dev);
365 static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
366 static const struct ethtool_ops netdev_ethtool_ops;
367 static void hardreset(struct net_device *dev);
368 static void do_reset(struct net_device *dev, int full);
369 static int init_mii(struct net_device *dev);
370 static void do_powerdown(struct net_device *dev);
371 static int do_stop(struct net_device *dev);
373 /*=============== Helper functions =========================*/
375 first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
379 if ((err = pcmcia_get_first_tuple(handle, tuple)) == 0 &&
380 (err = pcmcia_get_tuple_data(handle, tuple)) == 0)
381 err = pcmcia_parse_tuple(tuple, parse);
386 next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
390 if ((err = pcmcia_get_next_tuple(handle, tuple)) == 0 &&
391 (err = pcmcia_get_tuple_data(handle, tuple)) == 0)
392 err = pcmcia_parse_tuple(tuple, parse);
396 #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR)
397 #define GetByte(reg) ((unsigned)inb(ioaddr + (reg)))
398 #define GetWord(reg) ((unsigned)inw(ioaddr + (reg)))
399 #define PutByte(reg,value) outb((value), ioaddr+(reg))
400 #define PutWord(reg,value) outw((value), ioaddr+(reg))
402 /*====== Functions used for debugging =================================*/
403 #if defined(PCMCIA_DEBUG) && 0 /* reading regs may change system status */
405 PrintRegisters(struct net_device *dev)
407 unsigned int ioaddr = dev->base_addr;
412 printk(KDBG_XIRC "Register common: ");
413 for (i = 0; i < 8; i++)
414 printk(" %2.2x", GetByte(i));
416 for (page = 0; page <= 8; page++) {
417 printk(KDBG_XIRC "Register page %2x: ", page);
419 for (i = 8; i < 16; i++)
420 printk(" %2.2x", GetByte(i));
423 for (page=0x40 ; page <= 0x5f; page++) {
424 if (page == 0x43 || (page >= 0x46 && page <= 0x4f)
425 || (page >= 0x51 && page <=0x5e))
427 printk(KDBG_XIRC "Register page %2x: ", page);
429 for (i = 8; i < 16; i++)
430 printk(" %2.2x", GetByte(i));
435 #endif /* PCMCIA_DEBUG */
437 /*============== MII Management functions ===============*/
440 * Turn around for read
443 mii_idle(unsigned int ioaddr)
445 PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */
447 PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */
452 * Write a bit to MDI/O
455 mii_putbit(unsigned int ioaddr, unsigned data)
459 PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */
461 PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */
464 PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */
466 PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */
471 PutWord(XIRCREG2_GPR2-1, 0x0e0e);
473 PutWord(XIRCREG2_GPR2-1, 0x0f0f);
476 PutWord(XIRCREG2_GPR2-1, 0x0c0c);
478 PutWord(XIRCREG2_GPR2-1, 0x0d0d);
485 * Get a bit from MDI/O
488 mii_getbit(unsigned int ioaddr)
492 PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */
494 d = GetByte(XIRCREG2_GPR2); /* read MDIO */
495 PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */
497 return d & 0x20; /* read MDIO */
501 mii_wbits(unsigned int ioaddr, unsigned data, int len)
503 unsigned m = 1 << (len-1);
505 mii_putbit(ioaddr, data & m);
509 mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg)
515 for (i=0; i < 32; i++) /* 32 bit preamble */
516 mii_putbit(ioaddr, 1);
517 mii_wbits(ioaddr, 0x06, 4); /* Start and opcode for read */
518 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
519 mii_wbits(ioaddr, phyreg, 5); /* PHY register to read */
520 mii_idle(ioaddr); /* turn around */
523 for (m = 1<<15; m; m >>= 1)
524 if (mii_getbit(ioaddr))
531 mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data,
537 for (i=0; i < 32; i++) /* 32 bit preamble */
538 mii_putbit(ioaddr, 1);
539 mii_wbits(ioaddr, 0x05, 4); /* Start and opcode for write */
540 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
541 mii_wbits(ioaddr, phyreg, 5); /* PHY Register to write */
542 mii_putbit(ioaddr, 1); /* turn around */
543 mii_putbit(ioaddr, 0);
544 mii_wbits(ioaddr, data, len); /* And write the data */
548 /*============= Main bulk of functions =========================*/
550 static const struct net_device_ops netdev_ops = {
553 .ndo_start_xmit = do_start_xmit,
554 .ndo_tx_timeout = xirc_tx_timeout,
555 .ndo_set_config = do_config,
556 .ndo_do_ioctl = do_ioctl,
557 .ndo_set_multicast_list = set_multicast_list,
558 .ndo_change_mtu = eth_change_mtu,
559 .ndo_set_mac_address = eth_mac_addr,
560 .ndo_validate_addr = eth_validate_addr,
564 * xirc2ps_attach() creates an "instance" of the driver, allocating
565 * local data structures for one device. The device is registered
566 * with Card Services.
568 * The dev_link structure is initialized, but we don't actually
569 * configure the card at this point -- we wait until we receive a
570 * card insertion event.
574 xirc2ps_probe(struct pcmcia_device *link)
576 struct net_device *dev;
579 DEBUG(0, "attach()\n");
581 /* Allocate the device structure */
582 dev = alloc_etherdev(sizeof(local_info_t));
585 local = netdev_priv(dev);
590 /* General socket configuration */
591 link->conf.Attributes = CONF_ENABLE_IRQ;
592 link->conf.IntType = INT_MEMORY_AND_IO;
593 link->conf.ConfigIndex = 1;
594 link->irq.Handler = xirc2ps_interrupt;
595 link->irq.Instance = dev;
597 /* Fill in card specific entries */
598 dev->netdev_ops = &netdev_ops;
599 dev->ethtool_ops = &netdev_ethtool_ops;
600 dev->watchdog_timeo = TX_TIMEOUT;
601 INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task);
603 return xirc2ps_config(link);
604 } /* xirc2ps_attach */
607 * This deletes a driver "instance". The device is de-registered
608 * with Card Services. If it has been released, all local data
609 * structures are freed. Otherwise, the structures will be freed
610 * when the device is released.
614 xirc2ps_detach(struct pcmcia_device *link)
616 struct net_device *dev = link->priv;
618 DEBUG(0, "detach(0x%p)\n", link);
621 unregister_netdev(dev);
623 xirc2ps_release(link);
626 } /* xirc2ps_detach */
629 * Detect the type of the card. s is the buffer with the data of tuple 0x20
630 * Returns: 0 := not supported
631 * mediaid=11 and prodid=47
647 set_card_type(struct pcmcia_device *link, const void *s)
649 struct net_device *dev = link->priv;
650 local_info_t *local = netdev_priv(dev);
652 unsigned cisrev = ((const unsigned char *)s)[2];
654 unsigned mediaid= ((const unsigned char *)s)[3];
655 unsigned prodid = ((const unsigned char *)s)[4];
657 DEBUG(0, "cisrev=%02x mediaid=%02x prodid=%02x\n",
658 cisrev, mediaid, prodid);
663 local->card_type = XIR_UNKNOWN;
664 if (!(prodid & 0x40)) {
665 printk(KNOT_XIRC "Ooops: Not a creditcard\n");
668 if (!(mediaid & 0x01)) {
669 printk(KNOT_XIRC "Not an Ethernet card\n");
672 if (mediaid & 0x10) {
674 switch(prodid & 15) {
675 case 1: local->card_type = XIR_CEM ; break;
676 case 2: local->card_type = XIR_CEM2 ; break;
677 case 3: local->card_type = XIR_CEM3 ; break;
678 case 4: local->card_type = XIR_CEM33 ; break;
679 case 5: local->card_type = XIR_CEM56M;
683 case 7: /* 7 is the RealPort 10/56 */
684 local->card_type = XIR_CEM56 ;
690 switch(prodid & 15) {
691 case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ;
693 case 2: local->card_type = XIR_CE2; break;
694 case 3: local->card_type = XIR_CE3;
699 if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
700 printk(KNOT_XIRC "Sorry, this is an old CE card\n");
703 if (local->card_type == XIR_UNKNOWN)
704 printk(KNOT_XIRC "unknown card (mediaid=%02x prodid=%02x)\n",
711 * There are some CE2 cards out which claim to be a CE card.
712 * This function looks for a "CE2" in the 3rd version field.
713 * Returns: true if this is a CE2
716 has_ce2_string(struct pcmcia_device * p_dev)
718 if (p_dev->prod_id[2] && strstr(p_dev->prod_id[2], "CE2"))
724 xirc2ps_config_modem(struct pcmcia_device *p_dev,
725 cistpl_cftable_entry_t *cf,
726 cistpl_cftable_entry_t *dflt,
732 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
733 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
734 p_dev->io.BasePort2 = cf->io.win[0].base;
735 p_dev->io.BasePort1 = ioaddr;
736 if (!pcmcia_request_io(p_dev, &p_dev->io))
744 xirc2ps_config_check(struct pcmcia_device *p_dev,
745 cistpl_cftable_entry_t *cf,
746 cistpl_cftable_entry_t *dflt,
750 int *pass = priv_data;
752 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
753 p_dev->io.BasePort2 = cf->io.win[0].base;
754 p_dev->io.BasePort1 = p_dev->io.BasePort2
755 + (*pass ? (cf->index & 0x20 ? -24:8)
756 : (cf->index & 0x20 ? 8:-24));
757 if (!pcmcia_request_io(p_dev, &p_dev->io))
765 * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
766 * is received, to configure the PCMCIA socket, and to make the
767 * ethernet device available to the system.
770 xirc2ps_config(struct pcmcia_device * link)
772 struct net_device *dev = link->priv;
773 local_info_t *local = netdev_priv(dev);
779 cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data;
781 local->dingo_ccr = NULL;
783 DEBUG(0, "config(0x%p)\n", link);
786 * This reads the card's CONFIG tuple to find its configuration
789 tuple.Attributes = 0;
790 tuple.TupleData = buf;
791 tuple.TupleDataMax = 64;
792 tuple.TupleOffset = 0;
794 /* Is this a valid card */
795 tuple.DesiredTuple = CISTPL_MANFID;
796 if ((err=first_tuple(link, &tuple, &parse))) {
797 printk(KNOT_XIRC "manfid not found in CIS\n");
801 switch(parse.manfid.manf) {
803 local->manf_str = "Xircom";
806 local->manf_str = "Accton";
810 local->manf_str = "Compaq";
813 local->manf_str = "Intel";
816 local->manf_str = "Toshiba";
819 printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n",
820 (unsigned)parse.manfid.manf);
823 DEBUG(0, "found %s card\n", local->manf_str);
825 if (!set_card_type(link, buf)) {
826 printk(KNOT_XIRC "this card is not supported\n");
830 /* get the ethernet address from the CIS */
831 tuple.DesiredTuple = CISTPL_FUNCE;
832 for (err = first_tuple(link, &tuple, &parse); !err;
833 err = next_tuple(link, &tuple, &parse)) {
834 /* Once I saw two CISTPL_FUNCE_LAN_NODE_ID entries:
835 * the first one with a length of zero the second correct -
836 * so I skip all entries with length 0 */
837 if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID
838 && ((cistpl_lan_node_id_t *)parse.funce.data)->nb)
841 if (err) { /* not found: try to get the node-id from tuple 0x89 */
842 tuple.DesiredTuple = 0x89; /* data layout looks like tuple 0x22 */
843 if ((err = pcmcia_get_first_tuple(link, &tuple)) == 0 &&
844 (err = pcmcia_get_tuple_data(link, &tuple)) == 0) {
845 if (tuple.TupleDataLen == 8 && *buf == CISTPL_FUNCE_LAN_NODE_ID)
846 memcpy(&parse, buf, 8);
851 if (err) { /* another try (James Lehmer's CE2 version 4.1)*/
852 tuple.DesiredTuple = CISTPL_FUNCE;
853 for (err = first_tuple(link, &tuple, &parse); !err;
854 err = next_tuple(link, &tuple, &parse)) {
855 if (parse.funce.type == 0x02 && parse.funce.data[0] == 1
856 && parse.funce.data[1] == 6 && tuple.TupleDataLen == 13) {
858 memcpy(&parse, buf+1, 8);
864 printk(KNOT_XIRC "node-id not found in CIS\n");
867 node_id = (cistpl_lan_node_id_t *)parse.funce.data;
868 if (node_id->nb != 6) {
869 printk(KNOT_XIRC "malformed node-id in CIS\n");
872 for (i=0; i < 6; i++)
873 dev->dev_addr[i] = node_id->id[i];
875 link->io.IOAddrLines =10;
876 link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
877 link->irq.Attributes = IRQ_HANDLE_PRESENT;
878 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
883 link->conf.Attributes |= CONF_ENABLE_SPKR;
884 link->conf.Status |= CCSR_AUDIO_ENA;
886 link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED ;
887 link->io.NumPorts2 = 8;
888 link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
890 /* Take the Modem IO port from the CIS and scan for a free
892 link->io.NumPorts1 = 16; /* no Mako stuff anymore */
893 if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
896 link->io.NumPorts1 = 18;
897 /* We do 2 passes here: The first one uses the regular mapping and
898 * the second tries again, thereby considering that the 32 ports are
899 * mirrored every 32 bytes. Actually we use a mirrored port for
900 * the Mako if (on the first pass) the COR bit 5 is set.
902 for (pass=0; pass < 2; pass++)
903 if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass))
905 /* if special option:
906 * try to configure as Ethernet only.
909 printk(KNOT_XIRC "no ports available\n");
911 link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
912 link->io.NumPorts1 = 16;
913 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
914 link->io.BasePort1 = ioaddr;
915 if (!(err=pcmcia_request_io(link, &link->io)))
918 link->io.BasePort1 = 0; /* let CS decide */
919 if ((err=pcmcia_request_io(link, &link->io))) {
920 cs_error(link, RequestIO, err);
929 * Now allocate an interrupt line. Note that this does not
930 * actually assign a handler to the interrupt.
932 if ((err=pcmcia_request_irq(link, &link->irq))) {
933 cs_error(link, RequestIRQ, err);
938 * This actually configures the PCMCIA socket -- setting up
939 * the I/O windows and the interrupt mapping.
941 if ((err=pcmcia_request_configuration(link, &link->conf))) {
942 cs_error(link, RequestConfiguration, err);
951 /* Reset the modem's BAR to the correct value
952 * This is necessary because in the RequestConfiguration call,
953 * the base address of the ethernet port (BasePort1) is written
954 * to the BAR registers of the modem.
956 reg.Action = CS_WRITE;
957 reg.Offset = CISREG_IOBASE_0;
958 reg.Value = link->io.BasePort2 & 0xff;
959 if ((err = pcmcia_access_configuration_register(link, ®))) {
960 cs_error(link, AccessConfigurationRegister, err);
963 reg.Action = CS_WRITE;
964 reg.Offset = CISREG_IOBASE_1;
965 reg.Value = (link->io.BasePort2 >> 8) & 0xff;
966 if ((err = pcmcia_access_configuration_register(link, ®))) {
967 cs_error(link, AccessConfigurationRegister, err);
971 /* There is no config entry for the Ethernet part which
972 * is at 0x0800. So we allocate a window into the attribute
973 * memory and write direct to the CIS registers
975 req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
976 req.Base = req.Size = 0;
978 if ((err = pcmcia_request_window(&link, &req, &link->win))) {
979 cs_error(link, RequestWindow, err);
982 local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
983 mem.CardOffset = 0x0;
985 if ((err = pcmcia_map_mem_page(link->win, &mem))) {
986 cs_error(link, MapMemPage, err);
990 /* Setup the CCRs; there are no infos in the CIS about the Ethernet
993 writeb(0x47, local->dingo_ccr + CISREG_COR);
994 ioaddr = link->io.BasePort1;
995 writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0);
996 writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
1001 printk(KERN_INFO "ECOR:");
1002 for (i=0; i < 7; i++) {
1003 tmp = readb(local->dingo_ccr + i*2);
1004 printk(" %02x", tmp);
1007 printk(KERN_INFO "DCOR:");
1008 for (i=0; i < 4; i++) {
1009 tmp = readb(local->dingo_ccr + 0x20 + i*2);
1010 printk(" %02x", tmp);
1013 printk(KERN_INFO "SCOR:");
1014 for (i=0; i < 10; i++) {
1015 tmp = readb(local->dingo_ccr + 0x40 + i*2);
1016 printk(" %02x", tmp);
1022 writeb(0x01, local->dingo_ccr + 0x20);
1023 writeb(0x0c, local->dingo_ccr + 0x22);
1024 writeb(0x00, local->dingo_ccr + 0x24);
1025 writeb(0x00, local->dingo_ccr + 0x26);
1026 writeb(0x00, local->dingo_ccr + 0x28);
1029 /* The if_port symbol can be set when the module is loaded */
1030 local->probe_port=0;
1032 local->probe_port = dev->if_port = 1;
1033 } else if ((if_port >= 1 && if_port <= 2) ||
1034 (local->mohawk && if_port==4))
1035 dev->if_port = if_port;
1037 printk(KNOT_XIRC "invalid if_port requested\n");
1039 /* we can now register the device with the net subsystem */
1040 dev->irq = link->irq.AssignedIRQ;
1041 dev->base_addr = link->io.BasePort1;
1044 do_reset(dev, 1); /* a kludge to make the cem56 work */
1046 link->dev_node = &local->node;
1047 SET_NETDEV_DEV(dev, &handle_to_dev(link));
1049 if ((err=register_netdev(dev))) {
1050 printk(KNOT_XIRC "register_netdev() failed\n");
1051 link->dev_node = NULL;
1055 strcpy(local->node.dev_name, dev->name);
1057 /* give some infos about the hardware */
1058 printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %pM\n",
1059 dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq,
1065 xirc2ps_release(link);
1070 } /* xirc2ps_config */
1073 * After a card is removed, xirc2ps_release() will unregister the net
1074 * device, and release the PCMCIA configuration. If the device is
1075 * still open, this will be postponed until it is closed.
1078 xirc2ps_release(struct pcmcia_device *link)
1080 DEBUG(0, "release(0x%p)\n", link);
1083 struct net_device *dev = link->priv;
1084 local_info_t *local = netdev_priv(dev);
1086 iounmap(local->dingo_ccr - 0x0800);
1088 pcmcia_disable_device(link);
1089 } /* xirc2ps_release */
1091 /*====================================================================*/
1094 static int xirc2ps_suspend(struct pcmcia_device *link)
1096 struct net_device *dev = link->priv;
1099 netif_device_detach(dev);
1106 static int xirc2ps_resume(struct pcmcia_device *link)
1108 struct net_device *dev = link->priv;
1112 netif_device_attach(dev);
1119 /*====================================================================*/
1122 * This is the Interrupt service route.
1125 xirc2ps_interrupt(int irq, void *dev_id)
1127 struct net_device *dev = (struct net_device *)dev_id;
1128 local_info_t *lp = netdev_priv(dev);
1129 unsigned int ioaddr;
1131 unsigned bytes_rcvd;
1132 unsigned int_status, eth_status, rx_status, tx_status;
1133 unsigned rsr, pktlen;
1134 ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days
1135 * is this something to worry about?
1139 if (!netif_device_present(dev))
1142 ioaddr = dev->base_addr;
1143 if (lp->mohawk) { /* must disable the interrupt */
1144 PutByte(XIRCREG_CR, 0);
1147 DEBUG(6, "%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
1149 saved_page = GetByte(XIRCREG_PR);
1150 /* Read the ISR to see whats the cause for the interrupt.
1151 * This also clears the interrupt flags on CE2 cards
1153 int_status = GetByte(XIRCREG_ISR);
1156 if (int_status == 0xff) { /* card may be ejected */
1157 DEBUG(3, "%s: interrupt %d for dead card\n", dev->name, irq);
1160 eth_status = GetByte(XIRCREG_ESR);
1163 rx_status = GetByte(XIRCREG40_RXST0);
1164 PutByte(XIRCREG40_RXST0, (~rx_status & 0xff));
1165 tx_status = GetByte(XIRCREG40_TXST0);
1166 tx_status |= GetByte(XIRCREG40_TXST1) << 8;
1167 PutByte(XIRCREG40_TXST0, 0);
1168 PutByte(XIRCREG40_TXST1, 0);
1170 DEBUG(3, "%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
1171 dev->name, int_status, eth_status, rx_status, tx_status);
1173 /***** receive section ******/
1175 while (eth_status & FullPktRcvd) {
1176 rsr = GetByte(XIRCREG0_RSR);
1177 if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) {
1178 /* too many bytes received during this int, drop the rest of the
1180 dev->stats.rx_dropped++;
1181 DEBUG(2, "%s: RX drop, too much done\n", dev->name);
1182 } else if (rsr & PktRxOk) {
1183 struct sk_buff *skb;
1185 pktlen = GetWord(XIRCREG0_RBC);
1186 bytes_rcvd += pktlen;
1188 DEBUG(5, "rsr=%#02x packet_length=%u\n", rsr, pktlen);
1190 skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
1192 printk(KNOT_XIRC "low memory, packet dropped (size=%u)\n",
1194 dev->stats.rx_dropped++;
1195 } else { /* okay get the packet */
1196 skb_reserve(skb, 2);
1197 if (lp->silicon == 0 ) { /* work around a hardware bug */
1198 unsigned rhsa; /* receive start address */
1201 rhsa = GetWord(XIRCREG5_RHSA0);
1203 rhsa += 3; /* skip control infos */
1206 if (rhsa + pktlen > 0x8000) {
1208 u_char *buf = skb_put(skb, pktlen);
1209 for (i=0; i < pktlen ; i++, rhsa++) {
1210 buf[i] = GetByte(XIRCREG_EDP);
1211 if (rhsa == 0x8000) {
1217 insw(ioaddr+XIRCREG_EDP,
1218 skb_put(skb, pktlen), (pktlen+1)>>1);
1222 else if (lp->mohawk) {
1223 /* To use this 32 bit access we should use
1224 * a manual optimized loop
1225 * Also the words are swapped, we can get more
1226 * performance by using 32 bit access and swapping
1227 * the words in a register. Will need this for cardbus
1229 * Note: don't forget to change the ALLOC_SKB to .. +3
1232 u_long *p = skb_put(skb, pktlen);
1234 unsigned int edpreg = ioaddr+XIRCREG_EDP-2;
1235 for (i=0; i < len ; i += 4, p++) {
1237 __asm__("rorl $16,%0\n\t"
1245 insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen),
1248 skb->protocol = eth_type_trans(skb, dev);
1250 dev->stats.rx_packets++;
1251 dev->stats.rx_bytes += pktlen;
1252 if (!(rsr & PhyPkt))
1253 dev->stats.multicast++;
1255 } else { /* bad packet */
1256 DEBUG(5, "rsr=%#02x\n", rsr);
1258 if (rsr & PktTooLong) {
1259 dev->stats.rx_frame_errors++;
1260 DEBUG(3, "%s: Packet too long\n", dev->name);
1263 dev->stats.rx_crc_errors++;
1264 DEBUG(3, "%s: CRC error\n", dev->name);
1266 if (rsr & AlignErr) {
1267 dev->stats.rx_fifo_errors++; /* okay ? */
1268 DEBUG(3, "%s: Alignment error\n", dev->name);
1271 /* clear the received/dropped/error packet */
1272 PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */
1274 /* get the new ethernet status */
1275 eth_status = GetByte(XIRCREG_ESR);
1277 if (rx_status & 0x10) { /* Receive overrun */
1278 dev->stats.rx_over_errors++;
1279 PutByte(XIRCREG_CR, ClearRxOvrun);
1280 DEBUG(3, "receive overrun cleared\n");
1283 /***** transmit section ******/
1284 if (int_status & PktTxed) {
1287 n = lp->last_ptr_value;
1288 nn = GetByte(XIRCREG0_PTR);
1289 lp->last_ptr_value = nn;
1290 if (nn < n) /* rollover */
1291 dev->stats.tx_packets += 256 - n;
1292 else if (n == nn) { /* happens sometimes - don't know why */
1293 DEBUG(0, "PTR not changed?\n");
1295 dev->stats.tx_packets += lp->last_ptr_value - n;
1296 netif_wake_queue(dev);
1298 if (tx_status & 0x0002) { /* Execessive collissions */
1299 DEBUG(0, "tx restarted due to execssive collissions\n");
1300 PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */
1302 if (tx_status & 0x0040)
1303 dev->stats.tx_aborted_errors++;
1305 /* recalculate our work chunk so that we limit the duration of this
1306 * ISR to about 1/10 of a second.
1307 * Calculate only if we received a reasonable amount of bytes.
1309 if (bytes_rcvd > 1000) {
1310 u_long duration = jiffies - start_ticks;
1312 if (duration >= HZ/10) { /* if more than about 1/10 second */
1313 maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration;
1314 if (maxrx_bytes < 2000)
1316 else if (maxrx_bytes > 22000)
1317 maxrx_bytes = 22000;
1318 DEBUG(1, "set maxrx=%u (rcvd=%u ticks=%lu)\n",
1319 maxrx_bytes, bytes_rcvd, duration);
1320 } else if (!duration && maxrx_bytes < 22000) {
1321 /* now much faster */
1322 maxrx_bytes += 2000;
1323 if (maxrx_bytes > 22000)
1324 maxrx_bytes = 22000;
1325 DEBUG(1, "set maxrx=%u\n", maxrx_bytes);
1331 if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0)
1334 SelectPage(saved_page);
1335 PutByte(XIRCREG_CR, EnableIntr); /* re-enable interrupts */
1336 /* Instead of dropping packets during a receive, we could
1337 * force an interrupt with this command:
1338 * PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
1341 } /* xirc2ps_interrupt */
1343 /*====================================================================*/
1346 xirc2ps_tx_timeout_task(struct work_struct *work)
1348 local_info_t *local =
1349 container_of(work, local_info_t, tx_timeout_task);
1350 struct net_device *dev = local->dev;
1351 /* reset the card */
1353 dev->trans_start = jiffies;
1354 netif_wake_queue(dev);
1358 xirc_tx_timeout(struct net_device *dev)
1360 local_info_t *lp = netdev_priv(dev);
1361 dev->stats.tx_errors++;
1362 printk(KERN_NOTICE "%s: transmit timed out\n", dev->name);
1363 schedule_work(&lp->tx_timeout_task);
1367 do_start_xmit(struct sk_buff *skb, struct net_device *dev)
1369 local_info_t *lp = netdev_priv(dev);
1370 unsigned int ioaddr = dev->base_addr;
1373 unsigned pktlen = skb->len;
1375 DEBUG(1, "do_start_xmit(skb=%p, dev=%p) len=%u\n",
1379 /* adjust the packet length to min. required
1380 * and hope that the buffer is large enough
1381 * to provide some random data.
1382 * fixme: For Mohawk we can change this by sending
1383 * a larger packetlen than we actually have; the chip will
1384 * pad this in his buffer with random bytes
1386 if (pktlen < ETH_ZLEN)
1388 if (skb_padto(skb, ETH_ZLEN))
1389 return NETDEV_TX_OK;
1393 netif_stop_queue(dev);
1395 PutWord(XIRCREG0_TRS, (u_short)pktlen+2);
1396 freespace = GetWord(XIRCREG0_TSO);
1397 okay = freespace & 0x8000;
1398 freespace &= 0x7fff;
1399 /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
1400 okay = pktlen +2 < freespace;
1401 DEBUG(2 + (okay ? 2 : 0), "%s: avail. tx space=%u%s\n",
1402 dev->name, freespace, okay ? " (okay)":" (not enough)");
1403 if (!okay) { /* not enough space */
1404 return NETDEV_TX_BUSY; /* upper layer may decide to requeue this packet */
1406 /* send the packet */
1407 PutWord(XIRCREG_EDP, (u_short)pktlen);
1408 outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1);
1410 PutByte(XIRCREG_EDP, skb->data[pktlen-1]);
1413 PutByte(XIRCREG_CR, TransmitPacket|EnableIntr);
1415 dev_kfree_skb (skb);
1416 dev->trans_start = jiffies;
1417 dev->stats.tx_bytes += pktlen;
1418 netif_start_queue(dev);
1419 return NETDEV_TX_OK;
1423 * Set all addresses: This first one is the individual address,
1424 * the next 9 addresses are taken from the multicast list and
1425 * the rest is filled with the individual address.
1428 set_addresses(struct net_device *dev)
1430 unsigned int ioaddr = dev->base_addr;
1431 local_info_t *lp = netdev_priv(dev);
1432 struct dev_mc_list *dmi = dev->mc_list;
1433 unsigned char *addr;
1437 for (i=0,j=8,n=0; ; i++, j++) {
1442 if (n > 1 && n <= dev->mc_count && dmi) {
1452 if (n && n <= dev->mc_count && dmi)
1453 addr = dmi->dmi_addr;
1455 addr = dev->dev_addr;
1458 PutByte(j, addr[5-i]);
1460 PutByte(j, addr[i]);
1466 * Set or clear the multicast filter for this adaptor.
1467 * We can filter up to 9 addresses, if more are requested we set
1468 * multicast promiscuous mode.
1472 set_multicast_list(struct net_device *dev)
1474 unsigned int ioaddr = dev->base_addr;
1478 value = GetByte(XIRCREG42_SWC1) & 0xC0;
1480 if (dev->flags & IFF_PROMISC) { /* snoop */
1481 PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */
1482 } else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) {
1483 PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */
1484 } else if (dev->mc_count) {
1485 /* the chip can filter 9 addresses perfectly */
1486 PutByte(XIRCREG42_SWC1, value | 0x01);
1488 PutByte(XIRCREG40_CMD0, Offline);
1491 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1492 } else { /* standard usage */
1493 PutByte(XIRCREG42_SWC1, value | 0x00);
1499 do_config(struct net_device *dev, struct ifmap *map)
1501 local_info_t *local = netdev_priv(dev);
1503 DEBUG(0, "do_config(%p)\n", dev);
1504 if (map->port != 255 && map->port != dev->if_port) {
1508 local->probe_port = 1;
1511 local->probe_port = 0;
1512 dev->if_port = map->port;
1514 printk(KERN_INFO "%s: switching to %s port\n",
1515 dev->name, if_names[dev->if_port]);
1516 do_reset(dev,1); /* not the fine way :-) */
1525 do_open(struct net_device *dev)
1527 local_info_t *lp = netdev_priv(dev);
1528 struct pcmcia_device *link = lp->p_dev;
1530 DEBUG(0, "do_open(%p)\n", dev);
1532 /* Check that the PCMCIA card is still here. */
1533 /* Physical device present signature. */
1534 if (!pcmcia_dev_present(link))
1540 netif_start_queue(dev);
1546 static void netdev_get_drvinfo(struct net_device *dev,
1547 struct ethtool_drvinfo *info)
1549 strcpy(info->driver, "xirc2ps_cs");
1550 sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
1553 static const struct ethtool_ops netdev_ethtool_ops = {
1554 .get_drvinfo = netdev_get_drvinfo,
1558 do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1560 local_info_t *local = netdev_priv(dev);
1561 unsigned int ioaddr = dev->base_addr;
1562 struct mii_ioctl_data *data = if_mii(rq);
1564 DEBUG(1, "%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
1565 dev->name, rq->ifr_ifrn.ifrn_name, cmd,
1566 data->phy_id, data->reg_num, data->val_in, data->val_out);
1572 case SIOCGMIIPHY: /* Get the address of the PHY in use. */
1573 data->phy_id = 0; /* we have only this address */
1575 case SIOCGMIIREG: /* Read the specified MII register. */
1576 data->val_out = mii_rd(ioaddr, data->phy_id & 0x1f,
1577 data->reg_num & 0x1f);
1579 case SIOCSMIIREG: /* Write the specified MII register */
1580 mii_wr(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in,
1590 hardreset(struct net_device *dev)
1592 local_info_t *local = netdev_priv(dev);
1593 unsigned int ioaddr = dev->base_addr;
1597 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1598 msleep(40); /* wait 40 msec */
1600 PutByte(XIRCREG4_GPR1, 1); /* set bit 0: power up */
1602 PutByte(XIRCREG4_GPR1, 1 | 4); /* set bit 0: power up, bit 2: AIC */
1603 msleep(20); /* wait 20 msec */
1607 do_reset(struct net_device *dev, int full)
1609 local_info_t *local = netdev_priv(dev);
1610 unsigned int ioaddr = dev->base_addr;
1613 DEBUG(0, "%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
1616 PutByte(XIRCREG_CR, SoftReset); /* set */
1617 msleep(20); /* wait 20 msec */
1618 PutByte(XIRCREG_CR, 0); /* clear */
1619 msleep(40); /* wait 40 msec */
1620 if (local->mohawk) {
1622 /* set pin GP1 and GP2 to output (0x0c)
1623 * set GP1 to low to power up the ML6692 (0x00)
1624 * set GP2 to high to power up the 10Mhz chip (0x02)
1626 PutByte(XIRCREG4_GPR0, 0x0e);
1629 /* give the circuits some time to power up */
1630 msleep(500); /* about 500ms */
1632 local->last_ptr_value = 0;
1633 local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4
1634 : (GetByte(XIRCREG4_BOV) & 0x30) >> 4;
1636 if (local->probe_port) {
1637 if (!local->mohawk) {
1639 PutByte(XIRCREG4_GPR0, 4);
1640 local->probe_port = 0;
1642 } else if (dev->if_port == 2) { /* enable 10Base2 */
1644 PutByte(XIRCREG42_SWC1, 0xC0);
1645 } else { /* enable 10BaseT */
1647 PutByte(XIRCREG42_SWC1, 0x80);
1649 msleep(40); /* wait 40 msec to let it complete */
1654 value = GetByte(XIRCREG_ESR); /* read the ESR */
1655 printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value);
1661 PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */
1662 PutByte(XIRCREG1_IMR1, 1 ); /* and Set TxUnderrunDetect */
1663 value = GetByte(XIRCREG1_ECR);
1666 value |= DisableLinkPulse;
1667 PutByte(XIRCREG1_ECR, value);
1669 DEBUG(0, "%s: ECR is: %#02x\n", dev->name, value);
1672 PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */
1674 if (local->silicon != 1) {
1675 /* set the local memory dividing line.
1676 * The comments in the sample code say that this is only
1677 * settable with the scipper version 2 which is revision 0.
1678 * Always for CE3 cards
1681 PutWord(XIRCREG2_RBS, 0x2000);
1687 /* Hardware workaround:
1688 * The receive byte pointer after reset is off by 1 so we need
1689 * to move the offset pointer back to 0.
1692 PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */
1694 /* setup MAC IMRs and clear status registers */
1695 SelectPage(0x40); /* Bit 7 ... bit 0 */
1696 PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
1697 PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1698 PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
1699 PutByte(XIRCREG40_RXST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
1700 PutByte(XIRCREG40_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1701 PutByte(XIRCREG40_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
1703 if (full && local->mohawk && init_mii(dev)) {
1704 if (dev->if_port == 4 || local->dingo || local->new_mii) {
1705 printk(KERN_INFO "%s: MII selected\n", dev->name);
1707 PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08);
1710 printk(KERN_INFO "%s: MII detected; using 10mbs\n",
1713 if (dev->if_port == 2) /* enable 10Base2 */
1714 PutByte(XIRCREG42_SWC1, 0xC0);
1715 else /* enable 10BaseT */
1716 PutByte(XIRCREG42_SWC1, 0x80);
1717 msleep(40); /* wait 40 msec to let it complete */
1720 PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex));
1721 } else { /* No MII */
1723 value = GetByte(XIRCREG_ESR); /* read the ESR */
1724 dev->if_port = (value & MediaSelect) ? 1 : 2;
1727 /* configure the LEDs */
1729 if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */
1730 PutByte(XIRCREG2_LED, 0x3b);
1731 else /* Coax: Not-Collision and Activity */
1732 PutByte(XIRCREG2_LED, 0x3a);
1735 PutByte(0x0b, 0x04); /* 100 Mbit LED */
1737 /* enable receiver and put the mac online */
1739 set_multicast_list(dev);
1741 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1744 /* setup Ethernet IMR and enable interrupts */
1746 PutByte(XIRCREG1_IMR0, 0xff);
1749 PutByte(XIRCREG_CR, EnableIntr);
1750 if (local->modem && !local->dingo) { /* do some magic */
1751 if (!(GetByte(0x10) & 0x01))
1752 PutByte(0x10, 0x11); /* unmask master-int bit */
1756 printk(KERN_INFO "%s: media %s, silicon revision %d\n",
1757 dev->name, if_names[dev->if_port], local->silicon);
1758 /* We should switch back to page 0 to avoid a bug in revision 0
1759 * where regs with offset below 8 can't be read after an access
1760 * to the MAC registers */
1765 * Initialize the Media-Independent-Interface
1766 * Returns: True if we have a good MII
1769 init_mii(struct net_device *dev)
1771 local_info_t *local = netdev_priv(dev);
1772 unsigned int ioaddr = dev->base_addr;
1773 unsigned control, status, linkpartner;
1776 if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */
1777 dev->if_port = if_port;
1778 local->probe_port = 0;
1782 status = mii_rd(ioaddr, 0, 1);
1783 if ((status & 0xff00) != 0x7800)
1784 return 0; /* No MII */
1786 local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff);
1788 if (local->probe_port)
1789 control = 0x1000; /* auto neg */
1790 else if (dev->if_port == 4)
1791 control = 0x2000; /* no auto neg, 100mbs mode */
1793 control = 0x0000; /* no auto neg, 10mbs mode */
1794 mii_wr(ioaddr, 0, 0, control, 16);
1796 control = mii_rd(ioaddr, 0, 0);
1798 if (control & 0x0400) {
1799 printk(KERN_NOTICE "%s can't take PHY out of isolation mode\n",
1801 local->probe_port = 0;
1805 if (local->probe_port) {
1806 /* according to the DP83840A specs the auto negotiation process
1807 * may take up to 3.5 sec, so we use this also for our ML6692
1808 * Fixme: Better to use a timer here!
1810 for (i=0; i < 35; i++) {
1811 msleep(100); /* wait 100 msec */
1812 status = mii_rd(ioaddr, 0, 1);
1813 if ((status & 0x0020) && (status & 0x0004))
1817 if (!(status & 0x0020)) {
1818 printk(KERN_INFO "%s: autonegotiation failed;"
1819 " using 10mbs\n", dev->name);
1820 if (!local->new_mii) {
1822 mii_wr(ioaddr, 0, 0, control, 16);
1825 dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2;
1828 linkpartner = mii_rd(ioaddr, 0, 5);
1829 printk(KERN_INFO "%s: MII link partner: %04x\n",
1830 dev->name, linkpartner);
1831 if (linkpartner & 0x0080) {
1842 do_powerdown(struct net_device *dev)
1845 unsigned int ioaddr = dev->base_addr;
1847 DEBUG(0, "do_powerdown(%p)\n", dev);
1850 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1855 do_stop(struct net_device *dev)
1857 unsigned int ioaddr = dev->base_addr;
1858 local_info_t *lp = netdev_priv(dev);
1859 struct pcmcia_device *link = lp->p_dev;
1861 DEBUG(0, "do_stop(%p)\n", dev);
1866 netif_stop_queue(dev);
1869 PutByte(XIRCREG_CR, 0); /* disable interrupts */
1871 PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */
1873 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1880 static struct pcmcia_device_id xirc2ps_ids[] = {
1881 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a),
1882 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a),
1883 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
1884 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
1885 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
1886 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
1887 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
1888 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
1889 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
1890 PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
1891 PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
1892 PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073),
1893 PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3),
1894 PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609),
1895 PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46),
1896 PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2),
1897 PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769),
1898 PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db),
1899 PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf),
1900 /* also matches CFE-10 cards! */
1901 /* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */
1904 MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids);
1907 static struct pcmcia_driver xirc2ps_cs_driver = {
1908 .owner = THIS_MODULE,
1910 .name = "xirc2ps_cs",
1912 .probe = xirc2ps_probe,
1913 .remove = xirc2ps_detach,
1914 .id_table = xirc2ps_ids,
1915 .suspend = xirc2ps_suspend,
1916 .resume = xirc2ps_resume,
1920 init_xirc2ps_cs(void)
1922 return pcmcia_register_driver(&xirc2ps_cs_driver);
1926 exit_xirc2ps_cs(void)
1928 pcmcia_unregister_driver(&xirc2ps_cs_driver);
1931 module_init(init_xirc2ps_cs);
1932 module_exit(exit_xirc2ps_cs);
1935 static int __init setup_xirc2ps_cs(char *str)
1937 /* if_port, full_duplex, do_sound, lockup_hack
1939 int ints[10] = { -1 };
1941 str = get_options(str, 9, ints);
1943 #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
1944 MAYBE_SET(if_port, 3);
1945 MAYBE_SET(full_duplex, 4);
1946 MAYBE_SET(do_sound, 5);
1947 MAYBE_SET(lockup_hack, 6);
1953 __setup("xirc2ps_cs=", setup_xirc2ps_cs);