1 /*******************************************************************************
2 This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers.
3 ST Ethernet IPs are built around a Synopsys IP Core.
5 Copyright(C) 2007-2011 STMicroelectronics Ltd
7 This program is free software; you can redistribute it and/or modify it
8 under the terms and conditions of the GNU General Public License,
9 version 2, as published by the Free Software Foundation.
11 This program is distributed in the hope it will be useful, but WITHOUT
12 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 You should have received a copy of the GNU General Public License along with
17 this program; if not, write to the Free Software Foundation, Inc.,
18 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
20 The full GNU General Public License is included in this distribution in
21 the file called "COPYING".
23 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
25 Documentation available at:
26 http://www.stlinux.com
28 https://bugzilla.stlinux.com/
29 *******************************************************************************/
31 #include <linux/kernel.h>
32 #include <linux/interrupt.h>
34 #include <linux/tcp.h>
35 #include <linux/skbuff.h>
36 #include <linux/ethtool.h>
37 #include <linux/if_ether.h>
38 #include <linux/crc32.h>
39 #include <linux/mii.h>
41 #include <linux/if_vlan.h>
42 #include <linux/dma-mapping.h>
43 #include <linux/slab.h>
44 #include <linux/prefetch.h>
45 #ifdef CONFIG_STMMAC_DEBUG_FS
46 #include <linux/debugfs.h>
47 #include <linux/seq_file.h>
52 /*#define STMMAC_DEBUG*/
54 #define DBG(nlevel, klevel, fmt, args...) \
55 ((void)(netif_msg_##nlevel(priv) && \
56 printk(KERN_##klevel fmt, ## args)))
58 #define DBG(nlevel, klevel, fmt, args...) do { } while (0)
61 #undef STMMAC_RX_DEBUG
62 /*#define STMMAC_RX_DEBUG*/
63 #ifdef STMMAC_RX_DEBUG
64 #define RX_DBG(fmt, args...) printk(fmt, ## args)
66 #define RX_DBG(fmt, args...) do { } while (0)
69 #undef STMMAC_XMIT_DEBUG
70 /*#define STMMAC_XMIT_DEBUG*/
71 #ifdef STMMAC_TX_DEBUG
72 #define TX_DBG(fmt, args...) printk(fmt, ## args)
74 #define TX_DBG(fmt, args...) do { } while (0)
77 #define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
78 #define JUMBO_LEN 9000
80 /* Module parameters */
81 #define TX_TIMEO 5000 /* default 5 seconds */
82 static int watchdog = TX_TIMEO;
83 module_param(watchdog, int, S_IRUGO | S_IWUSR);
84 MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds");
86 static int debug = -1; /* -1: default, 0: no output, 16: all */
87 module_param(debug, int, S_IRUGO | S_IWUSR);
88 MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)");
91 module_param(phyaddr, int, S_IRUGO);
92 MODULE_PARM_DESC(phyaddr, "Physical device address");
94 #define DMA_TX_SIZE 256
95 static int dma_txsize = DMA_TX_SIZE;
96 module_param(dma_txsize, int, S_IRUGO | S_IWUSR);
97 MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list");
99 #define DMA_RX_SIZE 256
100 static int dma_rxsize = DMA_RX_SIZE;
101 module_param(dma_rxsize, int, S_IRUGO | S_IWUSR);
102 MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list");
104 static int flow_ctrl = FLOW_OFF;
105 module_param(flow_ctrl, int, S_IRUGO | S_IWUSR);
106 MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]");
108 static int pause = PAUSE_TIME;
109 module_param(pause, int, S_IRUGO | S_IWUSR);
110 MODULE_PARM_DESC(pause, "Flow Control Pause Time");
112 #define TC_DEFAULT 64
113 static int tc = TC_DEFAULT;
114 module_param(tc, int, S_IRUGO | S_IWUSR);
115 MODULE_PARM_DESC(tc, "DMA threshold control value");
117 /* Pay attention to tune this parameter; take care of both
118 * hardware capability and network stabitily/performance impact.
119 * Many tests showed that ~4ms latency seems to be good enough. */
120 #ifdef CONFIG_STMMAC_TIMER
121 #define DEFAULT_PERIODIC_RATE 256
122 static int tmrate = DEFAULT_PERIODIC_RATE;
123 module_param(tmrate, int, S_IRUGO | S_IWUSR);
124 MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)");
127 #define DMA_BUFFER_SIZE BUF_SIZE_2KiB
128 static int buf_sz = DMA_BUFFER_SIZE;
129 module_param(buf_sz, int, S_IRUGO | S_IWUSR);
130 MODULE_PARM_DESC(buf_sz, "DMA buffer size");
132 static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
133 NETIF_MSG_LINK | NETIF_MSG_IFUP |
134 NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
136 static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
138 #ifdef CONFIG_STMMAC_DEBUG_FS
139 static int stmmac_init_fs(struct net_device *dev);
140 static void stmmac_exit_fs(void);
144 * stmmac_verify_args - verify the driver parameters.
145 * Description: it verifies if some wrong parameter is passed to the driver.
146 * Note that wrong parameters are replaced with the default values.
148 static void stmmac_verify_args(void)
150 if (unlikely(watchdog < 0))
152 if (unlikely(dma_rxsize < 0))
153 dma_rxsize = DMA_RX_SIZE;
154 if (unlikely(dma_txsize < 0))
155 dma_txsize = DMA_TX_SIZE;
156 if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB)))
157 buf_sz = DMA_BUFFER_SIZE;
158 if (unlikely(flow_ctrl > 1))
159 flow_ctrl = FLOW_AUTO;
160 else if (likely(flow_ctrl < 0))
161 flow_ctrl = FLOW_OFF;
162 if (unlikely((pause < 0) || (pause > 0xffff)))
166 static void stmmac_clk_csr_set(struct stmmac_priv *priv)
168 #ifdef CONFIG_HAVE_CLK
171 if (IS_ERR(priv->stmmac_clk))
174 clk_rate = clk_get_rate(priv->stmmac_clk);
176 /* Platform provided default clk_csr would be assumed valid
177 * for all other cases except for the below mentioned ones. */
178 if (!(priv->clk_csr & MAC_CSR_H_FRQ_MASK)) {
179 if (clk_rate < CSR_F_35M)
180 priv->clk_csr = STMMAC_CSR_20_35M;
181 else if ((clk_rate >= CSR_F_35M) && (clk_rate < CSR_F_60M))
182 priv->clk_csr = STMMAC_CSR_35_60M;
183 else if ((clk_rate >= CSR_F_60M) && (clk_rate < CSR_F_100M))
184 priv->clk_csr = STMMAC_CSR_60_100M;
185 else if ((clk_rate >= CSR_F_100M) && (clk_rate < CSR_F_150M))
186 priv->clk_csr = STMMAC_CSR_100_150M;
187 else if ((clk_rate >= CSR_F_150M) && (clk_rate < CSR_F_250M))
188 priv->clk_csr = STMMAC_CSR_150_250M;
189 else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M))
190 priv->clk_csr = STMMAC_CSR_250_300M;
191 } /* For values higher than the IEEE 802.3 specified frequency
192 * we can not estimate the proper divider as it is not known
193 * the frequency of clk_csr_i. So we do not change the default
198 #if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
199 static void print_pkt(unsigned char *buf, int len)
202 pr_info("len = %d byte, buf addr: 0x%p", len, buf);
203 for (j = 0; j < len; j++) {
205 pr_info("\n %03x:", j);
206 pr_info(" %02x", buf[j]);
212 /* minimum number of free TX descriptors required to wake up TX process */
213 #define STMMAC_TX_THRESH(x) (x->dma_tx_size/4)
215 static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
217 return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1;
220 /* On some ST platforms, some HW system configuraton registers have to be
221 * set according to the link speed negotiated.
223 static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
225 struct phy_device *phydev = priv->phydev;
227 if (likely(priv->plat->fix_mac_speed))
228 priv->plat->fix_mac_speed(priv->plat->bsp_priv,
234 * @dev: net device structure
235 * Description: it adjusts the link parameters.
237 static void stmmac_adjust_link(struct net_device *dev)
239 struct stmmac_priv *priv = netdev_priv(dev);
240 struct phy_device *phydev = priv->phydev;
243 unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
248 DBG(probe, DEBUG, "stmmac_adjust_link: called. address %d link %d\n",
249 phydev->addr, phydev->link);
251 spin_lock_irqsave(&priv->lock, flags);
253 u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
255 /* Now we make sure that we can be in full duplex mode.
256 * If not, we operate in half-duplex mode. */
257 if (phydev->duplex != priv->oldduplex) {
259 if (!(phydev->duplex))
260 ctrl &= ~priv->hw->link.duplex;
262 ctrl |= priv->hw->link.duplex;
263 priv->oldduplex = phydev->duplex;
265 /* Flow Control operation */
267 priv->hw->mac->flow_ctrl(priv->ioaddr, phydev->duplex,
270 if (phydev->speed != priv->speed) {
272 switch (phydev->speed) {
274 if (likely(priv->plat->has_gmac))
275 ctrl &= ~priv->hw->link.port;
276 stmmac_hw_fix_mac_speed(priv);
280 if (priv->plat->has_gmac) {
281 ctrl |= priv->hw->link.port;
282 if (phydev->speed == SPEED_100) {
283 ctrl |= priv->hw->link.speed;
285 ctrl &= ~(priv->hw->link.speed);
288 ctrl &= ~priv->hw->link.port;
290 stmmac_hw_fix_mac_speed(priv);
293 if (netif_msg_link(priv))
294 pr_warning("%s: Speed (%d) is not 10"
295 " or 100!\n", dev->name, phydev->speed);
299 priv->speed = phydev->speed;
302 writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
304 if (!priv->oldlink) {
308 } else if (priv->oldlink) {
312 priv->oldduplex = -1;
315 if (new_state && netif_msg_link(priv))
316 phy_print_status(phydev);
318 spin_unlock_irqrestore(&priv->lock, flags);
320 DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n");
324 * stmmac_init_phy - PHY initialization
325 * @dev: net device structure
326 * Description: it initializes the driver's PHY state, and attaches the PHY
331 static int stmmac_init_phy(struct net_device *dev)
333 struct stmmac_priv *priv = netdev_priv(dev);
334 struct phy_device *phydev;
335 char phy_id[MII_BUS_ID_SIZE + 3];
336 char bus_id[MII_BUS_ID_SIZE];
337 int interface = priv->plat->interface;
340 priv->oldduplex = -1;
342 if (priv->plat->phy_bus_name)
343 snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
344 priv->plat->phy_bus_name, priv->plat->bus_id);
346 snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
349 snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
350 priv->plat->phy_addr);
351 pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id);
353 phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0, interface);
355 if (IS_ERR(phydev)) {
356 pr_err("%s: Could not attach to PHY\n", dev->name);
357 return PTR_ERR(phydev);
360 /* Stop Advertising 1000BASE Capability if interface is not GMII */
361 if ((interface == PHY_INTERFACE_MODE_MII) ||
362 (interface == PHY_INTERFACE_MODE_RMII))
363 phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
364 SUPPORTED_1000baseT_Full);
367 * Broken HW is sometimes missing the pull-up resistor on the
368 * MDIO line, which results in reads to non-existent devices returning
369 * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
371 * Note: phydev->phy_id is the result of reading the UID PHY registers.
373 if (phydev->phy_id == 0) {
374 phy_disconnect(phydev);
377 pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)"
378 " Link = %d\n", dev->name, phydev->phy_id, phydev->link);
380 priv->phydev = phydev;
387 * @p: pointer to the ring.
388 * @size: size of the ring.
389 * Description: display all the descriptors within the ring.
391 static void display_ring(struct dma_desc *p, int size)
399 for (i = 0; i < size; i++) {
400 struct tmp_s *x = (struct tmp_s *)(p + i);
401 pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x",
402 i, (unsigned int)virt_to_phys(&p[i]),
403 (unsigned int)(x->a), (unsigned int)((x->a) >> 32),
409 static int stmmac_set_bfsize(int mtu, int bufsize)
413 if (mtu >= BUF_SIZE_4KiB)
415 else if (mtu >= BUF_SIZE_2KiB)
417 else if (mtu >= DMA_BUFFER_SIZE)
420 ret = DMA_BUFFER_SIZE;
426 * init_dma_desc_rings - init the RX/TX descriptor rings
427 * @dev: net device structure
428 * Description: this function initializes the DMA RX/TX descriptors
429 * and allocates the socket buffers. It suppors the chained and ring
432 static void init_dma_desc_rings(struct net_device *dev)
435 struct stmmac_priv *priv = netdev_priv(dev);
437 unsigned int txsize = priv->dma_tx_size;
438 unsigned int rxsize = priv->dma_rx_size;
441 int des3_as_data_buf = 0;
443 /* Set the max buffer size according to the DESC mode
444 * and the MTU. Note that RING mode allows 16KiB bsize. */
445 bfsize = priv->hw->ring->set_16kib_bfsize(dev->mtu);
447 if (bfsize == BUF_SIZE_16KiB)
448 des3_as_data_buf = 1;
450 bfsize = stmmac_set_bfsize(dev->mtu, priv->dma_buf_sz);
452 #ifdef CONFIG_STMMAC_TIMER
453 /* Disable interrupts on completion for the reception if timer is on */
454 if (likely(priv->tm->enable))
458 DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n",
459 txsize, rxsize, bfsize);
461 priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL);
463 kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL);
465 (struct dma_desc *)dma_alloc_coherent(priv->device,
467 sizeof(struct dma_desc),
470 priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize,
473 (struct dma_desc *)dma_alloc_coherent(priv->device,
475 sizeof(struct dma_desc),
479 if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) {
480 pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__);
484 DBG(probe, INFO, "stmmac (%s) DMA desc: virt addr (Rx %p, "
485 "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n",
486 dev->name, priv->dma_rx, priv->dma_tx,
487 (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy);
489 /* RX INITIALIZATION */
490 DBG(probe, INFO, "stmmac: SKB addresses:\n"
491 "skb\t\tskb data\tdma data\n");
493 for (i = 0; i < rxsize; i++) {
494 struct dma_desc *p = priv->dma_rx + i;
496 skb = __netdev_alloc_skb(dev, bfsize + NET_IP_ALIGN,
498 if (unlikely(skb == NULL)) {
499 pr_err("%s: Rx init fails; skb is NULL\n", __func__);
502 skb_reserve(skb, NET_IP_ALIGN);
503 priv->rx_skbuff[i] = skb;
504 priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
505 bfsize, DMA_FROM_DEVICE);
507 p->des2 = priv->rx_skbuff_dma[i];
509 priv->hw->ring->init_desc3(des3_as_data_buf, p);
511 DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i],
512 priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]);
515 priv->dirty_rx = (unsigned int)(i - rxsize);
516 priv->dma_buf_sz = bfsize;
519 /* TX INITIALIZATION */
520 for (i = 0; i < txsize; i++) {
521 priv->tx_skbuff[i] = NULL;
522 priv->dma_tx[i].des2 = 0;
525 /* In case of Chained mode this sets the des3 to the next
526 * element in the chain */
527 priv->hw->ring->init_dma_chain(priv->dma_rx, priv->dma_rx_phy, rxsize);
528 priv->hw->ring->init_dma_chain(priv->dma_tx, priv->dma_tx_phy, txsize);
533 /* Clear the Rx/Tx descriptors */
534 priv->hw->desc->init_rx_desc(priv->dma_rx, rxsize, dis_ic);
535 priv->hw->desc->init_tx_desc(priv->dma_tx, txsize);
537 if (netif_msg_hw(priv)) {
538 pr_info("RX descriptor ring:\n");
539 display_ring(priv->dma_rx, rxsize);
540 pr_info("TX descriptor ring:\n");
541 display_ring(priv->dma_tx, txsize);
545 static void dma_free_rx_skbufs(struct stmmac_priv *priv)
549 for (i = 0; i < priv->dma_rx_size; i++) {
550 if (priv->rx_skbuff[i]) {
551 dma_unmap_single(priv->device, priv->rx_skbuff_dma[i],
552 priv->dma_buf_sz, DMA_FROM_DEVICE);
553 dev_kfree_skb_any(priv->rx_skbuff[i]);
555 priv->rx_skbuff[i] = NULL;
559 static void dma_free_tx_skbufs(struct stmmac_priv *priv)
563 for (i = 0; i < priv->dma_tx_size; i++) {
564 if (priv->tx_skbuff[i] != NULL) {
565 struct dma_desc *p = priv->dma_tx + i;
567 dma_unmap_single(priv->device, p->des2,
568 priv->hw->desc->get_tx_len(p),
570 dev_kfree_skb_any(priv->tx_skbuff[i]);
571 priv->tx_skbuff[i] = NULL;
576 static void free_dma_desc_resources(struct stmmac_priv *priv)
578 /* Release the DMA TX/RX socket buffers */
579 dma_free_rx_skbufs(priv);
580 dma_free_tx_skbufs(priv);
582 /* Free the region of consistent memory previously allocated for
584 dma_free_coherent(priv->device,
585 priv->dma_tx_size * sizeof(struct dma_desc),
586 priv->dma_tx, priv->dma_tx_phy);
587 dma_free_coherent(priv->device,
588 priv->dma_rx_size * sizeof(struct dma_desc),
589 priv->dma_rx, priv->dma_rx_phy);
590 kfree(priv->rx_skbuff_dma);
591 kfree(priv->rx_skbuff);
592 kfree(priv->tx_skbuff);
596 * stmmac_dma_operation_mode - HW DMA operation mode
597 * @priv : pointer to the private device structure.
598 * Description: it sets the DMA operation mode: tx/rx DMA thresholds
599 * or Store-And-Forward capability.
601 static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
603 if (likely(priv->plat->force_sf_dma_mode ||
604 ((priv->plat->tx_coe) && (!priv->no_csum_insertion)))) {
606 * In case of GMAC, SF mode can be enabled
607 * to perform the TX COE in HW. This depends on:
608 * 1) TX COE if actually supported
609 * 2) There is no bugged Jumbo frame support
610 * that needs to not insert csum in the TDES.
612 priv->hw->dma->dma_mode(priv->ioaddr,
613 SF_DMA_MODE, SF_DMA_MODE);
616 priv->hw->dma->dma_mode(priv->ioaddr, tc, SF_DMA_MODE);
621 * @priv: private driver structure
622 * Description: it reclaims resources after transmission completes.
624 static void stmmac_tx(struct stmmac_priv *priv)
626 unsigned int txsize = priv->dma_tx_size;
628 spin_lock(&priv->tx_lock);
630 while (priv->dirty_tx != priv->cur_tx) {
632 unsigned int entry = priv->dirty_tx % txsize;
633 struct sk_buff *skb = priv->tx_skbuff[entry];
634 struct dma_desc *p = priv->dma_tx + entry;
636 /* Check if the descriptor is owned by the DMA. */
637 if (priv->hw->desc->get_tx_owner(p))
640 /* Verify tx error by looking at the last segment */
641 last = priv->hw->desc->get_tx_ls(p);
644 priv->hw->desc->tx_status(&priv->dev->stats,
647 if (likely(tx_error == 0)) {
648 priv->dev->stats.tx_packets++;
649 priv->xstats.tx_pkt_n++;
651 priv->dev->stats.tx_errors++;
653 TX_DBG("%s: curr %d, dirty %d\n", __func__,
654 priv->cur_tx, priv->dirty_tx);
657 dma_unmap_single(priv->device, p->des2,
658 priv->hw->desc->get_tx_len(p),
660 priv->hw->ring->clean_desc3(p);
662 if (likely(skb != NULL)) {
664 * If there's room in the queue (limit it to size)
665 * we add this skb back into the pool,
666 * if it's the right size.
668 if ((skb_queue_len(&priv->rx_recycle) <
669 priv->dma_rx_size) &&
670 skb_recycle_check(skb, priv->dma_buf_sz))
671 __skb_queue_head(&priv->rx_recycle, skb);
675 priv->tx_skbuff[entry] = NULL;
678 priv->hw->desc->release_tx_desc(p);
680 entry = (++priv->dirty_tx) % txsize;
682 if (unlikely(netif_queue_stopped(priv->dev) &&
683 stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) {
684 netif_tx_lock(priv->dev);
685 if (netif_queue_stopped(priv->dev) &&
686 stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) {
687 TX_DBG("%s: restart transmit\n", __func__);
688 netif_wake_queue(priv->dev);
690 netif_tx_unlock(priv->dev);
692 spin_unlock(&priv->tx_lock);
695 static inline void stmmac_enable_irq(struct stmmac_priv *priv)
697 #ifdef CONFIG_STMMAC_TIMER
698 if (likely(priv->tm->enable))
699 priv->tm->timer_start(tmrate);
702 priv->hw->dma->enable_dma_irq(priv->ioaddr);
705 static inline void stmmac_disable_irq(struct stmmac_priv *priv)
707 #ifdef CONFIG_STMMAC_TIMER
708 if (likely(priv->tm->enable))
709 priv->tm->timer_stop();
712 priv->hw->dma->disable_dma_irq(priv->ioaddr);
715 static int stmmac_has_work(struct stmmac_priv *priv)
717 unsigned int has_work = 0;
718 int rxret, tx_work = 0;
720 rxret = priv->hw->desc->get_rx_owner(priv->dma_rx +
721 (priv->cur_rx % priv->dma_rx_size));
723 if (priv->dirty_tx != priv->cur_tx)
726 if (likely(!rxret || tx_work))
732 static inline void _stmmac_schedule(struct stmmac_priv *priv)
734 if (likely(stmmac_has_work(priv))) {
735 stmmac_disable_irq(priv);
736 napi_schedule(&priv->napi);
740 #ifdef CONFIG_STMMAC_TIMER
741 void stmmac_schedule(struct net_device *dev)
743 struct stmmac_priv *priv = netdev_priv(dev);
745 priv->xstats.sched_timer_n++;
747 _stmmac_schedule(priv);
750 static void stmmac_no_timer_started(unsigned int x)
754 static void stmmac_no_timer_stopped(void)
761 * @priv: pointer to the private device structure
762 * Description: it cleans the descriptors and restarts the transmission
765 static void stmmac_tx_err(struct stmmac_priv *priv)
767 netif_stop_queue(priv->dev);
769 priv->hw->dma->stop_tx(priv->ioaddr);
770 dma_free_tx_skbufs(priv);
771 priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
774 priv->hw->dma->start_tx(priv->ioaddr);
776 priv->dev->stats.tx_errors++;
777 netif_wake_queue(priv->dev);
781 static void stmmac_dma_interrupt(struct stmmac_priv *priv)
785 status = priv->hw->dma->dma_interrupt(priv->ioaddr, &priv->xstats);
786 if (likely(status == handle_tx_rx))
787 _stmmac_schedule(priv);
789 else if (unlikely(status == tx_hard_error_bump_tc)) {
790 /* Try to bump up the dma threshold on this failure */
791 if (unlikely(tc != SF_DMA_MODE) && (tc <= 256)) {
793 priv->hw->dma->dma_mode(priv->ioaddr, tc, SF_DMA_MODE);
794 priv->xstats.threshold = tc;
796 } else if (unlikely(status == tx_hard_error))
800 static void stmmac_mmc_setup(struct stmmac_priv *priv)
802 unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET |
803 MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET;
805 /* Mask MMC irq, counters are managed in SW and registers
806 * are cleared on each READ eventually. */
807 dwmac_mmc_intr_all_mask(priv->ioaddr);
809 if (priv->dma_cap.rmon) {
810 dwmac_mmc_ctrl(priv->ioaddr, mode);
811 memset(&priv->mmc, 0, sizeof(struct stmmac_counters));
813 pr_info(" No MAC Management Counters available\n");
816 static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv)
818 u32 hwid = priv->hw->synopsys_uid;
820 /* Only check valid Synopsys Id because old MAC chips
821 * have no HW registers where get the ID */
823 u32 uid = ((hwid & 0x0000ff00) >> 8);
824 u32 synid = (hwid & 0x000000ff);
826 pr_info("stmmac - user ID: 0x%x, Synopsys ID: 0x%x\n",
835 * stmmac_selec_desc_mode
836 * @priv : private structure
837 * Description: select the Enhanced/Alternate or Normal descriptors
839 static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
841 if (priv->plat->enh_desc) {
842 pr_info(" Enhanced/Alternate descriptors\n");
843 priv->hw->desc = &enh_desc_ops;
845 pr_info(" Normal descriptors\n");
846 priv->hw->desc = &ndesc_ops;
851 * stmmac_get_hw_features
852 * @priv : private device pointer
854 * new GMAC chip generations have a new register to indicate the
855 * presence of the optional feature/functions.
856 * This can be also used to override the value passed through the
857 * platform and necessary for old MAC10/100 and GMAC chips.
859 static int stmmac_get_hw_features(struct stmmac_priv *priv)
863 if (priv->hw->dma->get_hw_feature) {
864 hw_cap = priv->hw->dma->get_hw_feature(priv->ioaddr);
866 priv->dma_cap.mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
867 priv->dma_cap.mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
868 priv->dma_cap.half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
869 priv->dma_cap.hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4;
870 priv->dma_cap.multi_addr =
871 (hw_cap & DMA_HW_FEAT_ADDMACADRSEL) >> 5;
872 priv->dma_cap.pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6;
873 priv->dma_cap.sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8;
874 priv->dma_cap.pmt_remote_wake_up =
875 (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
876 priv->dma_cap.pmt_magic_frame =
877 (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
879 priv->dma_cap.rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
881 priv->dma_cap.time_stamp =
882 (hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12;
884 priv->dma_cap.atime_stamp =
885 (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13;
886 /* 802.3az - Energy-Efficient Ethernet (EEE) */
887 priv->dma_cap.eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14;
888 priv->dma_cap.av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15;
890 priv->dma_cap.tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16;
891 priv->dma_cap.rx_coe_type1 =
892 (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17;
893 priv->dma_cap.rx_coe_type2 =
894 (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18;
895 priv->dma_cap.rxfifo_over_2048 =
896 (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19;
897 /* TX and RX number of channels */
898 priv->dma_cap.number_rx_channel =
899 (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20;
900 priv->dma_cap.number_tx_channel =
901 (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22;
902 /* Alternate (enhanced) DESC mode*/
903 priv->dma_cap.enh_desc =
904 (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
911 static void stmmac_check_ether_addr(struct stmmac_priv *priv)
913 /* verify if the MAC address is valid, in case of failures it
914 * generates a random MAC address */
915 if (!is_valid_ether_addr(priv->dev->dev_addr)) {
916 priv->hw->mac->get_umac_addr((void __iomem *)
917 priv->dev->base_addr,
918 priv->dev->dev_addr, 0);
919 if (!is_valid_ether_addr(priv->dev->dev_addr))
920 eth_hw_addr_random(priv->dev);
922 pr_warning("%s: device MAC address %pM\n", priv->dev->name,
923 priv->dev->dev_addr);
926 static int stmmac_init_dma_engine(struct stmmac_priv *priv)
928 int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_len = 0;
931 /* Some DMA parameters can be passed from the platform;
932 * in case of these are not passed we keep a default
933 * (good for all the chips) and init the DMA! */
934 if (priv->plat->dma_cfg) {
935 pbl = priv->plat->dma_cfg->pbl;
936 fixed_burst = priv->plat->dma_cfg->fixed_burst;
937 mixed_burst = priv->plat->dma_cfg->mixed_burst;
938 burst_len = priv->plat->dma_cfg->burst_len;
941 return priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst,
942 burst_len, priv->dma_tx_phy,
947 * stmmac_open - open entry point of the driver
948 * @dev : pointer to the device structure.
950 * This function is the open entry point of the driver.
952 * 0 on success and an appropriate (-)ve integer as defined in errno.h
955 static int stmmac_open(struct net_device *dev)
957 struct stmmac_priv *priv = netdev_priv(dev);
960 #ifdef CONFIG_STMMAC_TIMER
961 priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
962 if (unlikely(priv->tm == NULL))
965 priv->tm->freq = tmrate;
967 /* Test if the external timer can be actually used.
968 * In case of failure continue without timer. */
969 if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) {
970 pr_warning("stmmaceth: cannot attach the external timer.\n");
972 priv->tm->timer_start = stmmac_no_timer_started;
973 priv->tm->timer_stop = stmmac_no_timer_stopped;
975 priv->tm->enable = 1;
977 stmmac_clk_enable(priv);
979 stmmac_check_ether_addr(priv);
981 ret = stmmac_init_phy(dev);
983 pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret);
987 /* Create and initialize the TX/RX descriptors chains. */
988 priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
989 priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
990 priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
991 init_dma_desc_rings(dev);
993 /* DMA initialization and SW reset */
994 ret = stmmac_init_dma_engine(priv);
996 pr_err("%s: DMA initialization failed\n", __func__);
1000 /* Copy the MAC addr into the HW */
1001 priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
1003 /* If required, perform hw setup of the bus. */
1004 if (priv->plat->bus_setup)
1005 priv->plat->bus_setup(priv->ioaddr);
1007 /* Initialize the MAC Core */
1008 priv->hw->mac->core_init(priv->ioaddr);
1010 /* Request the IRQ lines */
1011 ret = request_irq(dev->irq, stmmac_interrupt,
1012 IRQF_SHARED, dev->name, dev);
1013 if (unlikely(ret < 0)) {
1014 pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
1015 __func__, dev->irq, ret);
1019 /* Request the Wake IRQ in case of another line is used for WoL */
1020 if (priv->wol_irq != dev->irq) {
1021 ret = request_irq(priv->wol_irq, stmmac_interrupt,
1022 IRQF_SHARED, dev->name, dev);
1023 if (unlikely(ret < 0)) {
1024 pr_err("%s: ERROR: allocating the ext WoL IRQ %d "
1025 "(error: %d)\n", __func__, priv->wol_irq, ret);
1026 goto open_error_wolirq;
1030 /* Enable the MAC Rx/Tx */
1031 stmmac_set_mac(priv->ioaddr, true);
1033 /* Set the HW DMA mode and the COE */
1034 stmmac_dma_operation_mode(priv);
1036 /* Extra statistics */
1037 memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
1038 priv->xstats.threshold = tc;
1040 stmmac_mmc_setup(priv);
1042 #ifdef CONFIG_STMMAC_DEBUG_FS
1043 ret = stmmac_init_fs(dev);
1045 pr_warning("%s: failed debugFS registration\n", __func__);
1047 /* Start the ball rolling... */
1048 DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
1049 priv->hw->dma->start_tx(priv->ioaddr);
1050 priv->hw->dma->start_rx(priv->ioaddr);
1052 #ifdef CONFIG_STMMAC_TIMER
1053 priv->tm->timer_start(tmrate);
1056 /* Dump DMA/MAC registers */
1057 if (netif_msg_hw(priv)) {
1058 priv->hw->mac->dump_regs(priv->ioaddr);
1059 priv->hw->dma->dump_regs(priv->ioaddr);
1063 phy_start(priv->phydev);
1065 napi_enable(&priv->napi);
1066 skb_queue_head_init(&priv->rx_recycle);
1067 netif_start_queue(dev);
1072 free_irq(dev->irq, dev);
1075 #ifdef CONFIG_STMMAC_TIMER
1079 phy_disconnect(priv->phydev);
1081 stmmac_clk_disable(priv);
1087 * stmmac_release - close entry point of the driver
1088 * @dev : device pointer.
1090 * This is the stop entry point of the driver.
1092 static int stmmac_release(struct net_device *dev)
1094 struct stmmac_priv *priv = netdev_priv(dev);
1096 /* Stop and disconnect the PHY */
1098 phy_stop(priv->phydev);
1099 phy_disconnect(priv->phydev);
1100 priv->phydev = NULL;
1103 netif_stop_queue(dev);
1105 #ifdef CONFIG_STMMAC_TIMER
1106 /* Stop and release the timer */
1107 stmmac_close_ext_timer();
1108 if (priv->tm != NULL)
1111 napi_disable(&priv->napi);
1112 skb_queue_purge(&priv->rx_recycle);
1114 /* Free the IRQ lines */
1115 free_irq(dev->irq, dev);
1116 if (priv->wol_irq != dev->irq)
1117 free_irq(priv->wol_irq, dev);
1119 /* Stop TX/RX DMA and clear the descriptors */
1120 priv->hw->dma->stop_tx(priv->ioaddr);
1121 priv->hw->dma->stop_rx(priv->ioaddr);
1123 /* Release and free the Rx/Tx resources */
1124 free_dma_desc_resources(priv);
1126 /* Disable the MAC Rx/Tx */
1127 stmmac_set_mac(priv->ioaddr, false);
1129 netif_carrier_off(dev);
1131 #ifdef CONFIG_STMMAC_DEBUG_FS
1134 stmmac_clk_disable(priv);
1141 * @skb : the socket buffer
1142 * @dev : device pointer
1143 * Description : Tx entry point of the driver.
1145 static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
1147 struct stmmac_priv *priv = netdev_priv(dev);
1148 unsigned int txsize = priv->dma_tx_size;
1150 int i, csum_insertion = 0;
1151 int nfrags = skb_shinfo(skb)->nr_frags;
1152 struct dma_desc *desc, *first;
1153 unsigned int nopaged_len = skb_headlen(skb);
1155 if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) {
1156 if (!netif_queue_stopped(dev)) {
1157 netif_stop_queue(dev);
1158 /* This is a hard error, log it. */
1159 pr_err("%s: BUG! Tx Ring full when queue awake\n",
1162 return NETDEV_TX_BUSY;
1165 spin_lock(&priv->tx_lock);
1167 entry = priv->cur_tx % txsize;
1169 #ifdef STMMAC_XMIT_DEBUG
1170 if ((skb->len > ETH_FRAME_LEN) || nfrags)
1171 pr_info("stmmac xmit:\n"
1172 "\tskb addr %p - len: %d - nopaged_len: %d\n"
1173 "\tn_frags: %d - ip_summed: %d - %s gso\n",
1174 skb, skb->len, nopaged_len, nfrags, skb->ip_summed,
1175 !skb_is_gso(skb) ? "isn't" : "is");
1178 csum_insertion = (skb->ip_summed == CHECKSUM_PARTIAL);
1180 desc = priv->dma_tx + entry;
1183 #ifdef STMMAC_XMIT_DEBUG
1184 if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN))
1185 pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n"
1186 "\t\tn_frags: %d, ip_summed: %d\n",
1187 skb->len, nopaged_len, nfrags, skb->ip_summed);
1189 priv->tx_skbuff[entry] = skb;
1191 if (priv->hw->ring->is_jumbo_frm(skb->len, priv->plat->enh_desc)) {
1192 entry = priv->hw->ring->jumbo_frm(priv, skb, csum_insertion);
1193 desc = priv->dma_tx + entry;
1195 desc->des2 = dma_map_single(priv->device, skb->data,
1196 nopaged_len, DMA_TO_DEVICE);
1197 priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len,
1201 for (i = 0; i < nfrags; i++) {
1202 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1203 int len = skb_frag_size(frag);
1205 entry = (++priv->cur_tx) % txsize;
1206 desc = priv->dma_tx + entry;
1208 TX_DBG("\t[entry %d] segment len: %d\n", entry, len);
1209 desc->des2 = skb_frag_dma_map(priv->device, frag, 0, len,
1211 priv->tx_skbuff[entry] = NULL;
1212 priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion);
1214 priv->hw->desc->set_tx_owner(desc);
1218 /* Interrupt on completition only for the latest segment */
1219 priv->hw->desc->close_tx_desc(desc);
1221 #ifdef CONFIG_STMMAC_TIMER
1222 /* Clean IC while using timer */
1223 if (likely(priv->tm->enable))
1224 priv->hw->desc->clear_tx_ic(desc);
1229 /* To avoid raise condition */
1230 priv->hw->desc->set_tx_owner(first);
1235 #ifdef STMMAC_XMIT_DEBUG
1236 if (netif_msg_pktdata(priv)) {
1237 pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, "
1238 "first=%p, nfrags=%d\n",
1239 (priv->cur_tx % txsize), (priv->dirty_tx % txsize),
1240 entry, first, nfrags);
1241 display_ring(priv->dma_tx, txsize);
1242 pr_info(">>> frame to be transmitted: ");
1243 print_pkt(skb->data, skb->len);
1246 if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
1247 TX_DBG("%s: stop transmitted packets\n", __func__);
1248 netif_stop_queue(dev);
1251 dev->stats.tx_bytes += skb->len;
1253 skb_tx_timestamp(skb);
1255 priv->hw->dma->enable_dma_transmission(priv->ioaddr);
1257 spin_unlock(&priv->tx_lock);
1259 return NETDEV_TX_OK;
1262 static inline void stmmac_rx_refill(struct stmmac_priv *priv)
1264 unsigned int rxsize = priv->dma_rx_size;
1265 int bfsize = priv->dma_buf_sz;
1266 struct dma_desc *p = priv->dma_rx;
1268 for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) {
1269 unsigned int entry = priv->dirty_rx % rxsize;
1270 if (likely(priv->rx_skbuff[entry] == NULL)) {
1271 struct sk_buff *skb;
1273 skb = __skb_dequeue(&priv->rx_recycle);
1275 skb = netdev_alloc_skb_ip_align(priv->dev,
1278 if (unlikely(skb == NULL))
1281 priv->rx_skbuff[entry] = skb;
1282 priv->rx_skbuff_dma[entry] =
1283 dma_map_single(priv->device, skb->data, bfsize,
1286 (p + entry)->des2 = priv->rx_skbuff_dma[entry];
1288 if (unlikely(priv->plat->has_gmac))
1289 priv->hw->ring->refill_desc3(bfsize, p + entry);
1291 RX_DBG(KERN_INFO "\trefill entry #%d\n", entry);
1294 priv->hw->desc->set_rx_owner(p + entry);
1299 static int stmmac_rx(struct stmmac_priv *priv, int limit)
1301 unsigned int rxsize = priv->dma_rx_size;
1302 unsigned int entry = priv->cur_rx % rxsize;
1303 unsigned int next_entry;
1304 unsigned int count = 0;
1305 struct dma_desc *p = priv->dma_rx + entry;
1306 struct dma_desc *p_next;
1308 #ifdef STMMAC_RX_DEBUG
1309 if (netif_msg_hw(priv)) {
1310 pr_debug(">>> stmmac_rx: descriptor ring:\n");
1311 display_ring(priv->dma_rx, rxsize);
1315 while (!priv->hw->desc->get_rx_owner(p)) {
1323 next_entry = (++priv->cur_rx) % rxsize;
1324 p_next = priv->dma_rx + next_entry;
1327 /* read the status of the incoming frame */
1328 status = (priv->hw->desc->rx_status(&priv->dev->stats,
1330 if (unlikely(status == discard_frame))
1331 priv->dev->stats.rx_errors++;
1333 struct sk_buff *skb;
1336 frame_len = priv->hw->desc->get_rx_frame_len(p,
1337 priv->plat->rx_coe);
1338 /* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3
1339 * Type frames (LLC/LLC-SNAP) */
1340 if (unlikely(status != llc_snap))
1341 frame_len -= ETH_FCS_LEN;
1342 #ifdef STMMAC_RX_DEBUG
1343 if (frame_len > ETH_FRAME_LEN)
1344 pr_debug("\tRX frame size %d, COE status: %d\n",
1347 if (netif_msg_hw(priv))
1348 pr_debug("\tdesc: %p [entry %d] buff=0x%x\n",
1351 skb = priv->rx_skbuff[entry];
1352 if (unlikely(!skb)) {
1353 pr_err("%s: Inconsistent Rx descriptor chain\n",
1355 priv->dev->stats.rx_dropped++;
1358 prefetch(skb->data - NET_IP_ALIGN);
1359 priv->rx_skbuff[entry] = NULL;
1361 skb_put(skb, frame_len);
1362 dma_unmap_single(priv->device,
1363 priv->rx_skbuff_dma[entry],
1364 priv->dma_buf_sz, DMA_FROM_DEVICE);
1365 #ifdef STMMAC_RX_DEBUG
1366 if (netif_msg_pktdata(priv)) {
1367 pr_info(" frame received (%dbytes)", frame_len);
1368 print_pkt(skb->data, frame_len);
1371 skb->protocol = eth_type_trans(skb, priv->dev);
1373 if (unlikely(!priv->plat->rx_coe)) {
1374 /* No RX COE for old mac10/100 devices */
1375 skb_checksum_none_assert(skb);
1376 netif_receive_skb(skb);
1378 skb->ip_summed = CHECKSUM_UNNECESSARY;
1379 napi_gro_receive(&priv->napi, skb);
1382 priv->dev->stats.rx_packets++;
1383 priv->dev->stats.rx_bytes += frame_len;
1386 p = p_next; /* use prefetched values */
1389 stmmac_rx_refill(priv);
1391 priv->xstats.rx_pkt_n += count;
1397 * stmmac_poll - stmmac poll method (NAPI)
1398 * @napi : pointer to the napi structure.
1399 * @budget : maximum number of packets that the current CPU can receive from
1402 * This function implements the the reception process.
1403 * Also it runs the TX completion thread
1405 static int stmmac_poll(struct napi_struct *napi, int budget)
1407 struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi);
1410 priv->xstats.poll_n++;
1412 work_done = stmmac_rx(priv, budget);
1414 if (work_done < budget) {
1415 napi_complete(napi);
1416 stmmac_enable_irq(priv);
1423 * @dev : Pointer to net device structure
1424 * Description: this function is called when a packet transmission fails to
1425 * complete within a reasonable tmrate. The driver will mark the error in the
1426 * netdev structure and arrange for the device to be reset to a sane state
1427 * in order to transmit a new packet.
1429 static void stmmac_tx_timeout(struct net_device *dev)
1431 struct stmmac_priv *priv = netdev_priv(dev);
1433 /* Clear Tx resources and restart transmitting again */
1434 stmmac_tx_err(priv);
1437 /* Configuration changes (passed on by ifconfig) */
1438 static int stmmac_config(struct net_device *dev, struct ifmap *map)
1440 if (dev->flags & IFF_UP) /* can't act on a running interface */
1443 /* Don't allow changing the I/O address */
1444 if (map->base_addr != dev->base_addr) {
1445 pr_warning("%s: can't change I/O address\n", dev->name);
1449 /* Don't allow changing the IRQ */
1450 if (map->irq != dev->irq) {
1451 pr_warning("%s: can't change IRQ number %d\n",
1452 dev->name, dev->irq);
1456 /* ignore other fields */
1461 * stmmac_set_rx_mode - entry point for multicast addressing
1462 * @dev : pointer to the device structure
1464 * This function is a driver entry point which gets called by the kernel
1465 * whenever multicast addresses must be enabled/disabled.
1469 static void stmmac_set_rx_mode(struct net_device *dev)
1471 struct stmmac_priv *priv = netdev_priv(dev);
1473 spin_lock(&priv->lock);
1474 priv->hw->mac->set_filter(dev, priv->synopsys_id);
1475 spin_unlock(&priv->lock);
1479 * stmmac_change_mtu - entry point to change MTU size for the device.
1480 * @dev : device pointer.
1481 * @new_mtu : the new MTU size for the device.
1482 * Description: the Maximum Transfer Unit (MTU) is used by the network layer
1483 * to drive packet transmission. Ethernet has an MTU of 1500 octets
1484 * (ETH_DATA_LEN). This value can be changed with ifconfig.
1486 * 0 on success and an appropriate (-)ve integer as defined in errno.h
1489 static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
1491 struct stmmac_priv *priv = netdev_priv(dev);
1494 if (netif_running(dev)) {
1495 pr_err("%s: must be stopped to change its MTU\n", dev->name);
1499 if (priv->plat->enh_desc)
1500 max_mtu = JUMBO_LEN;
1502 max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN);
1504 if ((new_mtu < 46) || (new_mtu > max_mtu)) {
1505 pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu);
1510 netdev_update_features(dev);
1515 static netdev_features_t stmmac_fix_features(struct net_device *dev,
1516 netdev_features_t features)
1518 struct stmmac_priv *priv = netdev_priv(dev);
1520 if (priv->plat->rx_coe == STMMAC_RX_COE_NONE)
1521 features &= ~NETIF_F_RXCSUM;
1522 else if (priv->plat->rx_coe == STMMAC_RX_COE_TYPE1)
1523 features &= ~NETIF_F_IPV6_CSUM;
1524 if (!priv->plat->tx_coe)
1525 features &= ~NETIF_F_ALL_CSUM;
1527 /* Some GMAC devices have a bugged Jumbo frame support that
1528 * needs to have the Tx COE disabled for oversized frames
1529 * (due to limited buffer sizes). In this case we disable
1530 * the TX csum insertionin the TDES and not use SF. */
1531 if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN))
1532 features &= ~NETIF_F_ALL_CSUM;
1537 static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
1539 struct net_device *dev = (struct net_device *)dev_id;
1540 struct stmmac_priv *priv = netdev_priv(dev);
1542 if (unlikely(!dev)) {
1543 pr_err("%s: invalid dev pointer\n", __func__);
1547 if (priv->plat->has_gmac)
1548 /* To handle GMAC own interrupts */
1549 priv->hw->mac->host_irq_status((void __iomem *) dev->base_addr);
1551 stmmac_dma_interrupt(priv);
1556 #ifdef CONFIG_NET_POLL_CONTROLLER
1557 /* Polling receive - used by NETCONSOLE and other diagnostic tools
1558 * to allow network I/O with interrupts disabled. */
1559 static void stmmac_poll_controller(struct net_device *dev)
1561 disable_irq(dev->irq);
1562 stmmac_interrupt(dev->irq, dev);
1563 enable_irq(dev->irq);
1568 * stmmac_ioctl - Entry point for the Ioctl
1569 * @dev: Device pointer.
1570 * @rq: An IOCTL specefic structure, that can contain a pointer to
1571 * a proprietary structure used to pass information to the driver.
1572 * @cmd: IOCTL command
1574 * Currently there are no special functionality supported in IOCTL, just the
1575 * phy_mii_ioctl(...) can be invoked.
1577 static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1579 struct stmmac_priv *priv = netdev_priv(dev);
1582 if (!netif_running(dev))
1588 ret = phy_mii_ioctl(priv->phydev, rq, cmd);
1593 #ifdef CONFIG_STMMAC_DEBUG_FS
1594 static struct dentry *stmmac_fs_dir;
1595 static struct dentry *stmmac_rings_status;
1596 static struct dentry *stmmac_dma_cap;
1598 static int stmmac_sysfs_ring_read(struct seq_file *seq, void *v)
1606 struct net_device *dev = seq->private;
1607 struct stmmac_priv *priv = netdev_priv(dev);
1609 seq_printf(seq, "=======================\n");
1610 seq_printf(seq, " RX descriptor ring\n");
1611 seq_printf(seq, "=======================\n");
1613 for (i = 0; i < priv->dma_rx_size; i++) {
1614 struct tmp_s *x = (struct tmp_s *)(priv->dma_rx + i);
1615 seq_printf(seq, "[%d] DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x",
1616 i, (unsigned int)(x->a),
1617 (unsigned int)((x->a) >> 32), x->b, x->c);
1618 seq_printf(seq, "\n");
1621 seq_printf(seq, "\n");
1622 seq_printf(seq, "=======================\n");
1623 seq_printf(seq, " TX descriptor ring\n");
1624 seq_printf(seq, "=======================\n");
1626 for (i = 0; i < priv->dma_tx_size; i++) {
1627 struct tmp_s *x = (struct tmp_s *)(priv->dma_tx + i);
1628 seq_printf(seq, "[%d] DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x",
1629 i, (unsigned int)(x->a),
1630 (unsigned int)((x->a) >> 32), x->b, x->c);
1631 seq_printf(seq, "\n");
1637 static int stmmac_sysfs_ring_open(struct inode *inode, struct file *file)
1639 return single_open(file, stmmac_sysfs_ring_read, inode->i_private);
1642 static const struct file_operations stmmac_rings_status_fops = {
1643 .owner = THIS_MODULE,
1644 .open = stmmac_sysfs_ring_open,
1646 .llseek = seq_lseek,
1647 .release = single_release,
1650 static int stmmac_sysfs_dma_cap_read(struct seq_file *seq, void *v)
1652 struct net_device *dev = seq->private;
1653 struct stmmac_priv *priv = netdev_priv(dev);
1655 if (!priv->hw_cap_support) {
1656 seq_printf(seq, "DMA HW features not supported\n");
1660 seq_printf(seq, "==============================\n");
1661 seq_printf(seq, "\tDMA HW features\n");
1662 seq_printf(seq, "==============================\n");
1664 seq_printf(seq, "\t10/100 Mbps %s\n",
1665 (priv->dma_cap.mbps_10_100) ? "Y" : "N");
1666 seq_printf(seq, "\t1000 Mbps %s\n",
1667 (priv->dma_cap.mbps_1000) ? "Y" : "N");
1668 seq_printf(seq, "\tHalf duple %s\n",
1669 (priv->dma_cap.half_duplex) ? "Y" : "N");
1670 seq_printf(seq, "\tHash Filter: %s\n",
1671 (priv->dma_cap.hash_filter) ? "Y" : "N");
1672 seq_printf(seq, "\tMultiple MAC address registers: %s\n",
1673 (priv->dma_cap.multi_addr) ? "Y" : "N");
1674 seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfatces): %s\n",
1675 (priv->dma_cap.pcs) ? "Y" : "N");
1676 seq_printf(seq, "\tSMA (MDIO) Interface: %s\n",
1677 (priv->dma_cap.sma_mdio) ? "Y" : "N");
1678 seq_printf(seq, "\tPMT Remote wake up: %s\n",
1679 (priv->dma_cap.pmt_remote_wake_up) ? "Y" : "N");
1680 seq_printf(seq, "\tPMT Magic Frame: %s\n",
1681 (priv->dma_cap.pmt_magic_frame) ? "Y" : "N");
1682 seq_printf(seq, "\tRMON module: %s\n",
1683 (priv->dma_cap.rmon) ? "Y" : "N");
1684 seq_printf(seq, "\tIEEE 1588-2002 Time Stamp: %s\n",
1685 (priv->dma_cap.time_stamp) ? "Y" : "N");
1686 seq_printf(seq, "\tIEEE 1588-2008 Advanced Time Stamp:%s\n",
1687 (priv->dma_cap.atime_stamp) ? "Y" : "N");
1688 seq_printf(seq, "\t802.3az - Energy-Efficient Ethernet (EEE) %s\n",
1689 (priv->dma_cap.eee) ? "Y" : "N");
1690 seq_printf(seq, "\tAV features: %s\n", (priv->dma_cap.av) ? "Y" : "N");
1691 seq_printf(seq, "\tChecksum Offload in TX: %s\n",
1692 (priv->dma_cap.tx_coe) ? "Y" : "N");
1693 seq_printf(seq, "\tIP Checksum Offload (type1) in RX: %s\n",
1694 (priv->dma_cap.rx_coe_type1) ? "Y" : "N");
1695 seq_printf(seq, "\tIP Checksum Offload (type2) in RX: %s\n",
1696 (priv->dma_cap.rx_coe_type2) ? "Y" : "N");
1697 seq_printf(seq, "\tRXFIFO > 2048bytes: %s\n",
1698 (priv->dma_cap.rxfifo_over_2048) ? "Y" : "N");
1699 seq_printf(seq, "\tNumber of Additional RX channel: %d\n",
1700 priv->dma_cap.number_rx_channel);
1701 seq_printf(seq, "\tNumber of Additional TX channel: %d\n",
1702 priv->dma_cap.number_tx_channel);
1703 seq_printf(seq, "\tEnhanced descriptors: %s\n",
1704 (priv->dma_cap.enh_desc) ? "Y" : "N");
1709 static int stmmac_sysfs_dma_cap_open(struct inode *inode, struct file *file)
1711 return single_open(file, stmmac_sysfs_dma_cap_read, inode->i_private);
1714 static const struct file_operations stmmac_dma_cap_fops = {
1715 .owner = THIS_MODULE,
1716 .open = stmmac_sysfs_dma_cap_open,
1718 .llseek = seq_lseek,
1719 .release = single_release,
1722 static int stmmac_init_fs(struct net_device *dev)
1724 /* Create debugfs entries */
1725 stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL);
1727 if (!stmmac_fs_dir || IS_ERR(stmmac_fs_dir)) {
1728 pr_err("ERROR %s, debugfs create directory failed\n",
1729 STMMAC_RESOURCE_NAME);
1734 /* Entry to report DMA RX/TX rings */
1735 stmmac_rings_status = debugfs_create_file("descriptors_status",
1736 S_IRUGO, stmmac_fs_dir, dev,
1737 &stmmac_rings_status_fops);
1739 if (!stmmac_rings_status || IS_ERR(stmmac_rings_status)) {
1740 pr_info("ERROR creating stmmac ring debugfs file\n");
1741 debugfs_remove(stmmac_fs_dir);
1746 /* Entry to report the DMA HW features */
1747 stmmac_dma_cap = debugfs_create_file("dma_cap", S_IRUGO, stmmac_fs_dir,
1748 dev, &stmmac_dma_cap_fops);
1750 if (!stmmac_dma_cap || IS_ERR(stmmac_dma_cap)) {
1751 pr_info("ERROR creating stmmac MMC debugfs file\n");
1752 debugfs_remove(stmmac_rings_status);
1753 debugfs_remove(stmmac_fs_dir);
1761 static void stmmac_exit_fs(void)
1763 debugfs_remove(stmmac_rings_status);
1764 debugfs_remove(stmmac_dma_cap);
1765 debugfs_remove(stmmac_fs_dir);
1767 #endif /* CONFIG_STMMAC_DEBUG_FS */
1769 static const struct net_device_ops stmmac_netdev_ops = {
1770 .ndo_open = stmmac_open,
1771 .ndo_start_xmit = stmmac_xmit,
1772 .ndo_stop = stmmac_release,
1773 .ndo_change_mtu = stmmac_change_mtu,
1774 .ndo_fix_features = stmmac_fix_features,
1775 .ndo_set_rx_mode = stmmac_set_rx_mode,
1776 .ndo_tx_timeout = stmmac_tx_timeout,
1777 .ndo_do_ioctl = stmmac_ioctl,
1778 .ndo_set_config = stmmac_config,
1779 #ifdef CONFIG_NET_POLL_CONTROLLER
1780 .ndo_poll_controller = stmmac_poll_controller,
1782 .ndo_set_mac_address = eth_mac_addr,
1786 * stmmac_hw_init - Init the MAC device
1787 * @priv : pointer to the private device structure.
1788 * Description: this function detects which MAC device
1789 * (GMAC/MAC10-100) has to attached, checks the HW capability
1790 * (if supported) and sets the driver's features (for example
1791 * to use the ring or chaine mode or support the normal/enh
1792 * descriptor structure).
1794 static int stmmac_hw_init(struct stmmac_priv *priv)
1797 struct mac_device_info *mac;
1799 /* Identify the MAC HW device */
1800 if (priv->plat->has_gmac) {
1801 priv->dev->priv_flags |= IFF_UNICAST_FLT;
1802 mac = dwmac1000_setup(priv->ioaddr);
1804 mac = dwmac100_setup(priv->ioaddr);
1811 /* To use the chained or ring mode */
1812 priv->hw->ring = &ring_mode_ops;
1814 /* Get and dump the chip ID */
1815 priv->synopsys_id = stmmac_get_synopsys_id(priv);
1817 /* Get the HW capability (new GMAC newer than 3.50a) */
1818 priv->hw_cap_support = stmmac_get_hw_features(priv);
1819 if (priv->hw_cap_support) {
1820 pr_info(" DMA HW capability register supported");
1822 /* We can override some gmac/dma configuration fields: e.g.
1823 * enh_desc, tx_coe (e.g. that are passed through the
1824 * platform) with the values from the HW capability
1825 * register (if supported).
1827 priv->plat->enh_desc = priv->dma_cap.enh_desc;
1828 priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
1830 priv->plat->tx_coe = priv->dma_cap.tx_coe;
1832 if (priv->dma_cap.rx_coe_type2)
1833 priv->plat->rx_coe = STMMAC_RX_COE_TYPE2;
1834 else if (priv->dma_cap.rx_coe_type1)
1835 priv->plat->rx_coe = STMMAC_RX_COE_TYPE1;
1838 pr_info(" No HW DMA feature register supported");
1840 /* Select the enhnaced/normal descriptor structures */
1841 stmmac_selec_desc_mode(priv);
1843 /* Enable the IPC (Checksum Offload) and check if the feature has been
1844 * enabled during the core configuration. */
1845 ret = priv->hw->mac->rx_ipc(priv->ioaddr);
1847 pr_warning(" RX IPC Checksum Offload not configured.\n");
1848 priv->plat->rx_coe = STMMAC_RX_COE_NONE;
1851 if (priv->plat->rx_coe)
1852 pr_info(" RX Checksum Offload Engine supported (type %d)\n",
1853 priv->plat->rx_coe);
1854 if (priv->plat->tx_coe)
1855 pr_info(" TX Checksum insertion supported\n");
1857 if (priv->plat->pmt) {
1858 pr_info(" Wake-Up On Lan supported\n");
1859 device_set_wakeup_capable(priv->device, 1);
1867 * @device: device pointer
1868 * @plat_dat: platform data pointer
1869 * @addr: iobase memory address
1870 * Description: this is the main probe function used to
1871 * call the alloc_etherdev, allocate the priv structure.
1873 struct stmmac_priv *stmmac_dvr_probe(struct device *device,
1874 struct plat_stmmacenet_data *plat_dat,
1878 struct net_device *ndev = NULL;
1879 struct stmmac_priv *priv;
1881 ndev = alloc_etherdev(sizeof(struct stmmac_priv));
1885 SET_NETDEV_DEV(ndev, device);
1887 priv = netdev_priv(ndev);
1888 priv->device = device;
1893 stmmac_set_ethtool_ops(ndev);
1894 priv->pause = pause;
1895 priv->plat = plat_dat;
1896 priv->ioaddr = addr;
1897 priv->dev->base_addr = (unsigned long)addr;
1899 /* Verify driver arguments */
1900 stmmac_verify_args();
1902 /* Override with kernel parameters if supplied XXX CRS XXX
1903 * this needs to have multiple instances */
1904 if ((phyaddr >= 0) && (phyaddr <= 31))
1905 priv->plat->phy_addr = phyaddr;
1907 /* Init MAC and get the capabilities */
1908 stmmac_hw_init(priv);
1910 ndev->netdev_ops = &stmmac_netdev_ops;
1912 ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
1914 ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
1915 ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
1916 #ifdef STMMAC_VLAN_TAG_USED
1917 /* Both mac100 and gmac support receive VLAN tag detection */
1918 ndev->features |= NETIF_F_HW_VLAN_RX;
1920 priv->msg_enable = netif_msg_init(debug, default_msg_level);
1923 priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */
1925 netif_napi_add(ndev, &priv->napi, stmmac_poll, 64);
1927 spin_lock_init(&priv->lock);
1928 spin_lock_init(&priv->tx_lock);
1930 ret = register_netdev(ndev);
1932 pr_err("%s: ERROR %i registering the device\n", __func__, ret);
1936 if (stmmac_clk_get(priv))
1937 pr_warning("%s: warning: cannot get CSR clock\n", __func__);
1939 /* If a specific clk_csr value is passed from the platform
1940 * this means that the CSR Clock Range selection cannot be
1941 * changed at run-time and it is fixed. Viceversa the driver'll try to
1942 * set the MDC clock dynamically according to the csr actual
1945 if (!priv->plat->clk_csr)
1946 stmmac_clk_csr_set(priv);
1948 priv->clk_csr = priv->plat->clk_csr;
1950 /* MDIO bus Registration */
1951 ret = stmmac_mdio_register(ndev);
1953 pr_debug("%s: MDIO bus (id: %d) registration failed",
1954 __func__, priv->plat->bus_id);
1961 netif_napi_del(&priv->napi);
1963 unregister_netdev(ndev);
1971 * @ndev: net device pointer
1972 * Description: this function resets the TX/RX processes, disables the MAC RX/TX
1973 * changes the link status, releases the DMA descriptor rings.
1975 int stmmac_dvr_remove(struct net_device *ndev)
1977 struct stmmac_priv *priv = netdev_priv(ndev);
1979 pr_info("%s:\n\tremoving driver", __func__);
1981 priv->hw->dma->stop_rx(priv->ioaddr);
1982 priv->hw->dma->stop_tx(priv->ioaddr);
1984 stmmac_set_mac(priv->ioaddr, false);
1985 stmmac_mdio_unregister(ndev);
1986 netif_carrier_off(ndev);
1987 unregister_netdev(ndev);
1994 int stmmac_suspend(struct net_device *ndev)
1996 struct stmmac_priv *priv = netdev_priv(ndev);
1998 unsigned long flags;
2000 if (!ndev || !netif_running(ndev))
2004 phy_stop(priv->phydev);
2006 spin_lock_irqsave(&priv->lock, flags);
2008 netif_device_detach(ndev);
2009 netif_stop_queue(ndev);
2011 #ifdef CONFIG_STMMAC_TIMER
2012 priv->tm->timer_stop();
2013 if (likely(priv->tm->enable))
2016 napi_disable(&priv->napi);
2018 /* Stop TX/RX DMA */
2019 priv->hw->dma->stop_tx(priv->ioaddr);
2020 priv->hw->dma->stop_rx(priv->ioaddr);
2021 /* Clear the Rx/Tx descriptors */
2022 priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size,
2024 priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
2026 /* Enable Power down mode by programming the PMT regs */
2027 if (device_may_wakeup(priv->device))
2028 priv->hw->mac->pmt(priv->ioaddr, priv->wolopts);
2030 stmmac_set_mac(priv->ioaddr, false);
2031 /* Disable clock in case of PWM is off */
2032 stmmac_clk_disable(priv);
2034 spin_unlock_irqrestore(&priv->lock, flags);
2038 int stmmac_resume(struct net_device *ndev)
2040 struct stmmac_priv *priv = netdev_priv(ndev);
2041 unsigned long flags;
2043 if (!netif_running(ndev))
2046 spin_lock_irqsave(&priv->lock, flags);
2048 /* Power Down bit, into the PM register, is cleared
2049 * automatically as soon as a magic packet or a Wake-up frame
2050 * is received. Anyway, it's better to manually clear
2051 * this bit because it can generate problems while resuming
2052 * from another devices (e.g. serial console). */
2053 if (device_may_wakeup(priv->device))
2054 priv->hw->mac->pmt(priv->ioaddr, 0);
2056 /* enable the clk prevously disabled */
2057 stmmac_clk_enable(priv);
2059 netif_device_attach(ndev);
2061 /* Enable the MAC and DMA */
2062 stmmac_set_mac(priv->ioaddr, true);
2063 priv->hw->dma->start_tx(priv->ioaddr);
2064 priv->hw->dma->start_rx(priv->ioaddr);
2066 #ifdef CONFIG_STMMAC_TIMER
2067 if (likely(priv->tm->enable))
2068 priv->tm->timer_start(tmrate);
2070 napi_enable(&priv->napi);
2072 netif_start_queue(ndev);
2074 spin_unlock_irqrestore(&priv->lock, flags);
2077 phy_start(priv->phydev);
2082 int stmmac_freeze(struct net_device *ndev)
2084 if (!ndev || !netif_running(ndev))
2087 return stmmac_release(ndev);
2090 int stmmac_restore(struct net_device *ndev)
2092 if (!ndev || !netif_running(ndev))
2095 return stmmac_open(ndev);
2097 #endif /* CONFIG_PM */
2099 /* Driver can be configured w/ and w/ both PCI and Platf drivers
2100 * depending on the configuration selected.
2102 static int __init stmmac_init(void)
2107 err_plt = stmmac_register_platform();
2108 err_pci = stmmac_register_pci();
2110 if ((err_pci) && (err_plt)) {
2111 pr_err("stmmac: driver registration failed\n");
2118 static void __exit stmmac_exit(void)
2120 stmmac_unregister_platform();
2121 stmmac_unregister_pci();
2124 module_init(stmmac_init);
2125 module_exit(stmmac_exit);
2128 static int __init stmmac_cmdline_opt(char *str)
2134 while ((opt = strsep(&str, ",")) != NULL) {
2135 if (!strncmp(opt, "debug:", 6)) {
2136 if (strict_strtoul(opt + 6, 0, (unsigned long *)&debug))
2138 } else if (!strncmp(opt, "phyaddr:", 8)) {
2139 if (strict_strtoul(opt + 8, 0,
2140 (unsigned long *)&phyaddr))
2142 } else if (!strncmp(opt, "dma_txsize:", 11)) {
2143 if (strict_strtoul(opt + 11, 0,
2144 (unsigned long *)&dma_txsize))
2146 } else if (!strncmp(opt, "dma_rxsize:", 11)) {
2147 if (strict_strtoul(opt + 11, 0,
2148 (unsigned long *)&dma_rxsize))
2150 } else if (!strncmp(opt, "buf_sz:", 7)) {
2151 if (strict_strtoul(opt + 7, 0,
2152 (unsigned long *)&buf_sz))
2154 } else if (!strncmp(opt, "tc:", 3)) {
2155 if (strict_strtoul(opt + 3, 0, (unsigned long *)&tc))
2157 } else if (!strncmp(opt, "watchdog:", 9)) {
2158 if (strict_strtoul(opt + 9, 0,
2159 (unsigned long *)&watchdog))
2161 } else if (!strncmp(opt, "flow_ctrl:", 10)) {
2162 if (strict_strtoul(opt + 10, 0,
2163 (unsigned long *)&flow_ctrl))
2165 } else if (!strncmp(opt, "pause:", 6)) {
2166 if (strict_strtoul(opt + 6, 0, (unsigned long *)&pause))
2168 #ifdef CONFIG_STMMAC_TIMER
2169 } else if (!strncmp(opt, "tmrate:", 7)) {
2170 if (strict_strtoul(opt + 7, 0,
2171 (unsigned long *)&tmrate))
2179 pr_err("%s: ERROR broken module parameter conversion", __func__);
2183 __setup("stmmaceth=", stmmac_cmdline_opt);
2186 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet device driver");
2187 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
2188 MODULE_LICENSE("GPL");