3 * This is a driver for SMSC's 91C9x/91C1xx single-chip Ethernet devices.
5 * Copyright (C) 1996 by Erik Stahlman
6 * Copyright (C) 2001 Standard Microsystems Corporation
7 * Developed by Simple Network Magic Corporation
8 * Copyright (C) 2003 Monta Vista Software, Inc.
9 * Unified SMC91x driver by Nicolas Pitre
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, see <http://www.gnu.org/licenses/>.
25 * io = for the base address
27 * nowait = 0 for normal wait states, 1 eliminates additional wait states
30 * Erik Stahlman <erik@vt.edu>
32 * hardware multicast code:
33 * Peter Cammaert <pc@denkart.be>
36 * Daris A Nevil <dnevil@snmc.com>
37 * Nicolas Pitre <nico@fluxnic.net>
38 * Russell King <rmk@arm.linux.org.uk>
41 * 08/20/00 Arnaldo Melo fix kfree(skb) in smc_hardware_send_packet
42 * 12/15/00 Christian Jullien fix "Warning: kfree_skb on hard IRQ"
43 * 03/16/01 Daris A Nevil modified smc9194.c for use with LAN91C111
44 * 08/22/01 Scott Anderson merge changes from smc9194 to smc91111
45 * 08/21/01 Pramod B Bhardwaj added support for RevB of LAN91C111
46 * 12/20/01 Jeff Sutherland initial port to Xscale PXA with DMA support
47 * 04/07/03 Nicolas Pitre unified SMC91x driver, killed irq races,
48 * more bus abstraction, big cleanup, etc.
49 * 29/09/03 Russell King - add driver model support
51 * - convert to use generic MII interface
52 * - add link up/down notification
53 * - don't try to handle full negotiation in
55 * - clean up (and fix stack overrun) in PHY
56 * MII read/write functions
57 * 22/09/04 Nicolas Pitre big update (see commit log for details)
59 static const char version[] =
60 "smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>";
68 #include <linux/module.h>
69 #include <linux/kernel.h>
70 #include <linux/sched.h>
71 #include <linux/delay.h>
72 #include <linux/interrupt.h>
73 #include <linux/irq.h>
74 #include <linux/errno.h>
75 #include <linux/ioport.h>
76 #include <linux/crc32.h>
77 #include <linux/platform_device.h>
78 #include <linux/spinlock.h>
79 #include <linux/ethtool.h>
80 #include <linux/mii.h>
81 #include <linux/workqueue.h>
83 #include <linux/of_device.h>
84 #include <linux/of_gpio.h>
86 #include <linux/netdevice.h>
87 #include <linux/etherdevice.h>
88 #include <linux/skbuff.h>
97 static int nowait = SMC_NOWAIT;
98 module_param(nowait, int, 0400);
99 MODULE_PARM_DESC(nowait, "set to 1 for no wait state");
102 * Transmit timeout, default 5 seconds.
104 static int watchdog = 1000;
105 module_param(watchdog, int, 0400);
106 MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
108 MODULE_LICENSE("GPL");
109 MODULE_ALIAS("platform:smc91x");
112 * The internal workings of the driver. If you are changing anything
113 * here with the SMC stuff, you should have the datasheet and know
114 * what you are doing.
116 #define CARDNAME "smc91x"
119 * Use power-down feature of the chip
124 * Wait time for memory to be free. This probably shouldn't be
125 * tuned that much, as waiting for this means nothing else happens
128 #define MEMORY_WAIT_TIME 16
131 * The maximum number of processing loops allowed for each call to the
134 #define MAX_IRQ_LOOPS 8
137 * This selects whether TX packets are sent one by one to the SMC91x internal
138 * memory and throttled until transmission completes. This may prevent
139 * RX overruns a litle by keeping much of the memory free for RX packets
140 * but to the expense of reduced TX throughput and increased IRQ overhead.
141 * Note this is not a cure for a too slow data bus or too high IRQ latency.
143 #define THROTTLE_TX_PKTS 0
146 * The MII clock high/low times. 2x this number gives the MII clock period
147 * in microseconds. (was 50, but this gives 6.4ms for each MII transaction!)
151 #define DBG(n, dev, fmt, ...) \
153 if (SMC_DEBUG >= (n)) \
154 netdev_dbg(dev, fmt, ##__VA_ARGS__); \
157 #define PRINTK(dev, fmt, ...) \
160 netdev_info(dev, fmt, ##__VA_ARGS__); \
162 netdev_dbg(dev, fmt, ##__VA_ARGS__); \
166 static void PRINT_PKT(u_char *buf, int length)
173 remainder = length % 16;
175 for (i = 0; i < lines ; i ++) {
178 for (cur = 0; cur < 8; cur++) {
182 pr_cont("%02x%02x ", a, b);
187 for (i = 0; i < remainder/2 ; i++) {
191 pr_cont("%02x%02x ", a, b);
196 static inline void PRINT_PKT(u_char *buf, int length) { }
200 /* this enables an interrupt in the interrupt mask register */
201 #define SMC_ENABLE_INT(lp, x) do { \
202 unsigned char mask; \
203 unsigned long smc_enable_flags; \
204 spin_lock_irqsave(&lp->lock, smc_enable_flags); \
205 mask = SMC_GET_INT_MASK(lp); \
207 SMC_SET_INT_MASK(lp, mask); \
208 spin_unlock_irqrestore(&lp->lock, smc_enable_flags); \
211 /* this disables an interrupt from the interrupt mask register */
212 #define SMC_DISABLE_INT(lp, x) do { \
213 unsigned char mask; \
214 unsigned long smc_disable_flags; \
215 spin_lock_irqsave(&lp->lock, smc_disable_flags); \
216 mask = SMC_GET_INT_MASK(lp); \
218 SMC_SET_INT_MASK(lp, mask); \
219 spin_unlock_irqrestore(&lp->lock, smc_disable_flags); \
223 * Wait while MMU is busy. This is usually in the order of a few nanosecs
224 * if at all, but let's avoid deadlocking the system if the hardware
225 * decides to go south.
227 #define SMC_WAIT_MMU_BUSY(lp) do { \
228 if (unlikely(SMC_GET_MMU_CMD(lp) & MC_BUSY)) { \
229 unsigned long timeout = jiffies + 2; \
230 while (SMC_GET_MMU_CMD(lp) & MC_BUSY) { \
231 if (time_after(jiffies, timeout)) { \
232 netdev_dbg(dev, "timeout %s line %d\n", \
233 __FILE__, __LINE__); \
243 * this does a soft reset on the device
245 static void smc_reset(struct net_device *dev)
247 struct smc_local *lp = netdev_priv(dev);
248 void __iomem *ioaddr = lp->base;
249 unsigned int ctl, cfg;
250 struct sk_buff *pending_skb;
252 DBG(2, dev, "%s\n", __func__);
254 /* Disable all interrupts, block TX tasklet */
255 spin_lock_irq(&lp->lock);
256 SMC_SELECT_BANK(lp, 2);
257 SMC_SET_INT_MASK(lp, 0);
258 pending_skb = lp->pending_tx_skb;
259 lp->pending_tx_skb = NULL;
260 spin_unlock_irq(&lp->lock);
262 /* free any pending tx skb */
264 dev_kfree_skb(pending_skb);
265 dev->stats.tx_errors++;
266 dev->stats.tx_aborted_errors++;
270 * This resets the registers mostly to defaults, but doesn't
271 * affect EEPROM. That seems unnecessary
273 SMC_SELECT_BANK(lp, 0);
274 SMC_SET_RCR(lp, RCR_SOFTRST);
277 * Setup the Configuration Register
278 * This is necessary because the CONFIG_REG is not affected
281 SMC_SELECT_BANK(lp, 1);
283 cfg = CONFIG_DEFAULT;
286 * Setup for fast accesses if requested. If the card/system
287 * can't handle it then there will be no recovery except for
288 * a hard reset or power cycle
290 if (lp->cfg.flags & SMC91X_NOWAIT)
291 cfg |= CONFIG_NO_WAIT;
294 * Release from possible power-down state
295 * Configuration register is not affected by Soft Reset
297 cfg |= CONFIG_EPH_POWER_EN;
299 SMC_SET_CONFIG(lp, cfg);
301 /* this should pause enough for the chip to be happy */
303 * elaborate? What does the chip _need_? --jgarzik
305 * This seems to be undocumented, but something the original
306 * driver(s) have always done. Suspect undocumented timing
307 * info/determined empirically. --rmk
311 /* Disable transmit and receive functionality */
312 SMC_SELECT_BANK(lp, 0);
313 SMC_SET_RCR(lp, RCR_CLEAR);
314 SMC_SET_TCR(lp, TCR_CLEAR);
316 SMC_SELECT_BANK(lp, 1);
317 ctl = SMC_GET_CTL(lp) | CTL_LE_ENABLE;
320 * Set the control register to automatically release successfully
321 * transmitted packets, to make the best use out of our limited
324 if(!THROTTLE_TX_PKTS)
325 ctl |= CTL_AUTO_RELEASE;
327 ctl &= ~CTL_AUTO_RELEASE;
328 SMC_SET_CTL(lp, ctl);
331 SMC_SELECT_BANK(lp, 2);
332 SMC_SET_MMU_CMD(lp, MC_RESET);
333 SMC_WAIT_MMU_BUSY(lp);
337 * Enable Interrupts, Receive, and Transmit
339 static void smc_enable(struct net_device *dev)
341 struct smc_local *lp = netdev_priv(dev);
342 void __iomem *ioaddr = lp->base;
345 DBG(2, dev, "%s\n", __func__);
347 /* see the header file for options in TCR/RCR DEFAULT */
348 SMC_SELECT_BANK(lp, 0);
349 SMC_SET_TCR(lp, lp->tcr_cur_mode);
350 SMC_SET_RCR(lp, lp->rcr_cur_mode);
352 SMC_SELECT_BANK(lp, 1);
353 SMC_SET_MAC_ADDR(lp, dev->dev_addr);
355 /* now, enable interrupts */
356 mask = IM_EPH_INT|IM_RX_OVRN_INT|IM_RCV_INT;
357 if (lp->version >= (CHIP_91100 << 4))
359 SMC_SELECT_BANK(lp, 2);
360 SMC_SET_INT_MASK(lp, mask);
363 * From this point the register bank must _NOT_ be switched away
364 * to something else than bank 2 without proper locking against
365 * races with any tasklet or interrupt handlers until smc_shutdown()
366 * or smc_reset() is called.
371 * this puts the device in an inactive state
373 static void smc_shutdown(struct net_device *dev)
375 struct smc_local *lp = netdev_priv(dev);
376 void __iomem *ioaddr = lp->base;
377 struct sk_buff *pending_skb;
379 DBG(2, dev, "%s: %s\n", CARDNAME, __func__);
381 /* no more interrupts for me */
382 spin_lock_irq(&lp->lock);
383 SMC_SELECT_BANK(lp, 2);
384 SMC_SET_INT_MASK(lp, 0);
385 pending_skb = lp->pending_tx_skb;
386 lp->pending_tx_skb = NULL;
387 spin_unlock_irq(&lp->lock);
389 dev_kfree_skb(pending_skb);
391 /* and tell the card to stay away from that nasty outside world */
392 SMC_SELECT_BANK(lp, 0);
393 SMC_SET_RCR(lp, RCR_CLEAR);
394 SMC_SET_TCR(lp, TCR_CLEAR);
397 /* finally, shut the chip down */
398 SMC_SELECT_BANK(lp, 1);
399 SMC_SET_CONFIG(lp, SMC_GET_CONFIG(lp) & ~CONFIG_EPH_POWER_EN);
404 * This is the procedure to handle the receipt of a packet.
406 static inline void smc_rcv(struct net_device *dev)
408 struct smc_local *lp = netdev_priv(dev);
409 void __iomem *ioaddr = lp->base;
410 unsigned int packet_number, status, packet_len;
412 DBG(3, dev, "%s\n", __func__);
414 packet_number = SMC_GET_RXFIFO(lp);
415 if (unlikely(packet_number & RXFIFO_REMPTY)) {
416 PRINTK(dev, "smc_rcv with nothing on FIFO.\n");
420 /* read from start of packet */
421 SMC_SET_PTR(lp, PTR_READ | PTR_RCV | PTR_AUTOINC);
423 /* First two words are status and packet length */
424 SMC_GET_PKT_HDR(lp, status, packet_len);
425 packet_len &= 0x07ff; /* mask off top bits */
426 DBG(2, dev, "RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n",
427 packet_number, status, packet_len, packet_len);
430 if (unlikely(packet_len < 6 || status & RS_ERRORS)) {
431 if (status & RS_TOOLONG && packet_len <= (1514 + 4 + 6)) {
432 /* accept VLAN packets */
433 status &= ~RS_TOOLONG;
436 if (packet_len < 6) {
437 /* bloody hardware */
438 netdev_err(dev, "fubar (rxlen %u status %x\n",
440 status |= RS_TOOSHORT;
442 SMC_WAIT_MMU_BUSY(lp);
443 SMC_SET_MMU_CMD(lp, MC_RELEASE);
444 dev->stats.rx_errors++;
445 if (status & RS_ALGNERR)
446 dev->stats.rx_frame_errors++;
447 if (status & (RS_TOOSHORT | RS_TOOLONG))
448 dev->stats.rx_length_errors++;
449 if (status & RS_BADCRC)
450 dev->stats.rx_crc_errors++;
454 unsigned int data_len;
456 /* set multicast stats */
457 if (status & RS_MULTICAST)
458 dev->stats.multicast++;
461 * Actual payload is packet_len - 6 (or 5 if odd byte).
462 * We want skb_reserve(2) and the final ctrl word
463 * (2 bytes, possibly containing the payload odd byte).
464 * Furthermore, we add 2 bytes to allow rounding up to
465 * multiple of 4 bytes on 32 bit buses.
466 * Hence packet_len - 6 + 2 + 2 + 2.
468 skb = netdev_alloc_skb(dev, packet_len);
469 if (unlikely(skb == NULL)) {
470 SMC_WAIT_MMU_BUSY(lp);
471 SMC_SET_MMU_CMD(lp, MC_RELEASE);
472 dev->stats.rx_dropped++;
476 /* Align IP header to 32 bits */
479 /* BUG: the LAN91C111 rev A never sets this bit. Force it. */
480 if (lp->version == 0x90)
481 status |= RS_ODDFRAME;
484 * If odd length: packet_len - 5,
485 * otherwise packet_len - 6.
486 * With the trailing ctrl byte it's packet_len - 4.
488 data_len = packet_len - ((status & RS_ODDFRAME) ? 5 : 6);
489 data = skb_put(skb, data_len);
490 SMC_PULL_DATA(lp, data, packet_len - 4);
492 SMC_WAIT_MMU_BUSY(lp);
493 SMC_SET_MMU_CMD(lp, MC_RELEASE);
495 PRINT_PKT(data, packet_len - 4);
497 skb->protocol = eth_type_trans(skb, dev);
499 dev->stats.rx_packets++;
500 dev->stats.rx_bytes += data_len;
506 * On SMP we have the following problem:
508 * A = smc_hardware_send_pkt()
509 * B = smc_hard_start_xmit()
510 * C = smc_interrupt()
512 * A and B can never be executed simultaneously. However, at least on UP,
513 * it is possible (and even desirable) for C to interrupt execution of
514 * A or B in order to have better RX reliability and avoid overruns.
515 * C, just like A and B, must have exclusive access to the chip and
516 * each of them must lock against any other concurrent access.
517 * Unfortunately this is not possible to have C suspend execution of A or
518 * B taking place on another CPU. On UP this is no an issue since A and B
519 * are run from softirq context and C from hard IRQ context, and there is
520 * no other CPU where concurrent access can happen.
521 * If ever there is a way to force at least B and C to always be executed
522 * on the same CPU then we could use read/write locks to protect against
523 * any other concurrent access and C would always interrupt B. But life
524 * isn't that easy in a SMP world...
526 #define smc_special_trylock(lock, flags) \
529 local_irq_save(flags); \
530 __ret = spin_trylock(lock); \
532 local_irq_restore(flags); \
535 #define smc_special_lock(lock, flags) spin_lock_irqsave(lock, flags)
536 #define smc_special_unlock(lock, flags) spin_unlock_irqrestore(lock, flags)
538 #define smc_special_trylock(lock, flags) (flags == flags)
539 #define smc_special_lock(lock, flags) do { flags = 0; } while (0)
540 #define smc_special_unlock(lock, flags) do { flags = 0; } while (0)
544 * This is called to actually send a packet to the chip.
546 static void smc_hardware_send_pkt(unsigned long data)
548 struct net_device *dev = (struct net_device *)data;
549 struct smc_local *lp = netdev_priv(dev);
550 void __iomem *ioaddr = lp->base;
552 unsigned int packet_no, len;
556 DBG(3, dev, "%s\n", __func__);
558 if (!smc_special_trylock(&lp->lock, flags)) {
559 netif_stop_queue(dev);
560 tasklet_schedule(&lp->tx_task);
564 skb = lp->pending_tx_skb;
565 if (unlikely(!skb)) {
566 smc_special_unlock(&lp->lock, flags);
569 lp->pending_tx_skb = NULL;
571 packet_no = SMC_GET_AR(lp);
572 if (unlikely(packet_no & AR_FAILED)) {
573 netdev_err(dev, "Memory allocation failed.\n");
574 dev->stats.tx_errors++;
575 dev->stats.tx_fifo_errors++;
576 smc_special_unlock(&lp->lock, flags);
580 /* point to the beginning of the packet */
581 SMC_SET_PN(lp, packet_no);
582 SMC_SET_PTR(lp, PTR_AUTOINC);
586 DBG(2, dev, "TX PNR 0x%x LENGTH 0x%04x (%d) BUF 0x%p\n",
587 packet_no, len, len, buf);
591 * Send the packet length (+6 for status words, length, and ctl.
592 * The card will pad to 64 bytes with zeroes if packet is too small.
594 SMC_PUT_PKT_HDR(lp, 0, len + 6);
596 /* send the actual data */
597 SMC_PUSH_DATA(lp, buf, len & ~1);
599 /* Send final ctl word with the last byte if there is one */
600 SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG(lp));
603 * If THROTTLE_TX_PKTS is set, we stop the queue here. This will
604 * have the effect of having at most one packet queued for TX
605 * in the chip's memory at all time.
607 * If THROTTLE_TX_PKTS is not set then the queue is stopped only
608 * when memory allocation (MC_ALLOC) does not succeed right away.
610 if (THROTTLE_TX_PKTS)
611 netif_stop_queue(dev);
613 /* queue the packet for TX */
614 SMC_SET_MMU_CMD(lp, MC_ENQUEUE);
615 smc_special_unlock(&lp->lock, flags);
617 dev->trans_start = jiffies;
618 dev->stats.tx_packets++;
619 dev->stats.tx_bytes += len;
621 SMC_ENABLE_INT(lp, IM_TX_INT | IM_TX_EMPTY_INT);
623 done: if (!THROTTLE_TX_PKTS)
624 netif_wake_queue(dev);
626 dev_consume_skb_any(skb);
630 * Since I am not sure if I will have enough room in the chip's ram
631 * to store the packet, I call this routine which either sends it
632 * now, or set the card to generates an interrupt when ready
635 static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
637 struct smc_local *lp = netdev_priv(dev);
638 void __iomem *ioaddr = lp->base;
639 unsigned int numPages, poll_count, status;
642 DBG(3, dev, "%s\n", __func__);
644 BUG_ON(lp->pending_tx_skb != NULL);
647 * The MMU wants the number of pages to be the number of 256 bytes
648 * 'pages', minus 1 (since a packet can't ever have 0 pages :))
650 * The 91C111 ignores the size bits, but earlier models don't.
652 * Pkt size for allocating is data length +6 (for additional status
653 * words, length and ctl)
655 * If odd size then last byte is included in ctl word.
657 numPages = ((skb->len & ~1) + (6 - 1)) >> 8;
658 if (unlikely(numPages > 7)) {
659 netdev_warn(dev, "Far too big packet error.\n");
660 dev->stats.tx_errors++;
661 dev->stats.tx_dropped++;
662 dev_kfree_skb_any(skb);
666 smc_special_lock(&lp->lock, flags);
668 /* now, try to allocate the memory */
669 SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages);
672 * Poll the chip for a short amount of time in case the
673 * allocation succeeds quickly.
675 poll_count = MEMORY_WAIT_TIME;
677 status = SMC_GET_INT(lp);
678 if (status & IM_ALLOC_INT) {
679 SMC_ACK_INT(lp, IM_ALLOC_INT);
682 } while (--poll_count);
684 smc_special_unlock(&lp->lock, flags);
686 lp->pending_tx_skb = skb;
688 /* oh well, wait until the chip finds memory later */
689 netif_stop_queue(dev);
690 DBG(2, dev, "TX memory allocation deferred.\n");
691 SMC_ENABLE_INT(lp, IM_ALLOC_INT);
694 * Allocation succeeded: push packet to the chip's own memory
697 smc_hardware_send_pkt((unsigned long)dev);
704 * This handles a TX interrupt, which is only called when:
705 * - a TX error occurred, or
706 * - CTL_AUTO_RELEASE is not set and TX of a packet completed.
708 static void smc_tx(struct net_device *dev)
710 struct smc_local *lp = netdev_priv(dev);
711 void __iomem *ioaddr = lp->base;
712 unsigned int saved_packet, packet_no, tx_status, pkt_len;
714 DBG(3, dev, "%s\n", __func__);
716 /* If the TX FIFO is empty then nothing to do */
717 packet_no = SMC_GET_TXFIFO(lp);
718 if (unlikely(packet_no & TXFIFO_TEMPTY)) {
719 PRINTK(dev, "smc_tx with nothing on FIFO.\n");
723 /* select packet to read from */
724 saved_packet = SMC_GET_PN(lp);
725 SMC_SET_PN(lp, packet_no);
727 /* read the first word (status word) from this packet */
728 SMC_SET_PTR(lp, PTR_AUTOINC | PTR_READ);
729 SMC_GET_PKT_HDR(lp, tx_status, pkt_len);
730 DBG(2, dev, "TX STATUS 0x%04x PNR 0x%02x\n",
731 tx_status, packet_no);
733 if (!(tx_status & ES_TX_SUC))
734 dev->stats.tx_errors++;
736 if (tx_status & ES_LOSTCARR)
737 dev->stats.tx_carrier_errors++;
739 if (tx_status & (ES_LATCOL | ES_16COL)) {
740 PRINTK(dev, "%s occurred on last xmit\n",
741 (tx_status & ES_LATCOL) ?
742 "late collision" : "too many collisions");
743 dev->stats.tx_window_errors++;
744 if (!(dev->stats.tx_window_errors & 63) && net_ratelimit()) {
745 netdev_info(dev, "unexpectedly large number of bad collisions. Please check duplex setting.\n");
749 /* kill the packet */
750 SMC_WAIT_MMU_BUSY(lp);
751 SMC_SET_MMU_CMD(lp, MC_FREEPKT);
753 /* Don't restore Packet Number Reg until busy bit is cleared */
754 SMC_WAIT_MMU_BUSY(lp);
755 SMC_SET_PN(lp, saved_packet);
757 /* re-enable transmit */
758 SMC_SELECT_BANK(lp, 0);
759 SMC_SET_TCR(lp, lp->tcr_cur_mode);
760 SMC_SELECT_BANK(lp, 2);
764 /*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
766 static void smc_mii_out(struct net_device *dev, unsigned int val, int bits)
768 struct smc_local *lp = netdev_priv(dev);
769 void __iomem *ioaddr = lp->base;
770 unsigned int mii_reg, mask;
772 mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO);
775 for (mask = 1 << (bits - 1); mask; mask >>= 1) {
781 SMC_SET_MII(lp, mii_reg);
783 SMC_SET_MII(lp, mii_reg | MII_MCLK);
788 static unsigned int smc_mii_in(struct net_device *dev, int bits)
790 struct smc_local *lp = netdev_priv(dev);
791 void __iomem *ioaddr = lp->base;
792 unsigned int mii_reg, mask, val;
794 mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO);
795 SMC_SET_MII(lp, mii_reg);
797 for (mask = 1 << (bits - 1), val = 0; mask; mask >>= 1) {
798 if (SMC_GET_MII(lp) & MII_MDI)
801 SMC_SET_MII(lp, mii_reg);
803 SMC_SET_MII(lp, mii_reg | MII_MCLK);
811 * Reads a register from the MII Management serial interface
813 static int smc_phy_read(struct net_device *dev, int phyaddr, int phyreg)
815 struct smc_local *lp = netdev_priv(dev);
816 void __iomem *ioaddr = lp->base;
817 unsigned int phydata;
819 SMC_SELECT_BANK(lp, 3);
822 smc_mii_out(dev, 0xffffffff, 32);
824 /* Start code (01) + read (10) + phyaddr + phyreg */
825 smc_mii_out(dev, 6 << 10 | phyaddr << 5 | phyreg, 14);
827 /* Turnaround (2bits) + phydata */
828 phydata = smc_mii_in(dev, 18);
830 /* Return to idle state */
831 SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
833 DBG(3, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
834 __func__, phyaddr, phyreg, phydata);
836 SMC_SELECT_BANK(lp, 2);
841 * Writes a register to the MII Management serial interface
843 static void smc_phy_write(struct net_device *dev, int phyaddr, int phyreg,
846 struct smc_local *lp = netdev_priv(dev);
847 void __iomem *ioaddr = lp->base;
849 SMC_SELECT_BANK(lp, 3);
852 smc_mii_out(dev, 0xffffffff, 32);
854 /* Start code (01) + write (01) + phyaddr + phyreg + turnaround + phydata */
855 smc_mii_out(dev, 5 << 28 | phyaddr << 23 | phyreg << 18 | 2 << 16 | phydata, 32);
857 /* Return to idle state */
858 SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
860 DBG(3, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
861 __func__, phyaddr, phyreg, phydata);
863 SMC_SELECT_BANK(lp, 2);
867 * Finds and reports the PHY address
869 static void smc_phy_detect(struct net_device *dev)
871 struct smc_local *lp = netdev_priv(dev);
874 DBG(2, dev, "%s\n", __func__);
879 * Scan all 32 PHY addresses if necessary, starting at
880 * PHY#1 to PHY#31, and then PHY#0 last.
882 for (phyaddr = 1; phyaddr < 33; ++phyaddr) {
883 unsigned int id1, id2;
885 /* Read the PHY identifiers */
886 id1 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID1);
887 id2 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID2);
889 DBG(3, dev, "phy_id1=0x%x, phy_id2=0x%x\n",
892 /* Make sure it is a valid identifier */
893 if (id1 != 0x0000 && id1 != 0xffff && id1 != 0x8000 &&
894 id2 != 0x0000 && id2 != 0xffff && id2 != 0x8000) {
895 /* Save the PHY's address */
896 lp->mii.phy_id = phyaddr & 31;
897 lp->phy_type = id1 << 16 | id2;
904 * Sets the PHY to a configuration as determined by the user
906 static int smc_phy_fixed(struct net_device *dev)
908 struct smc_local *lp = netdev_priv(dev);
909 void __iomem *ioaddr = lp->base;
910 int phyaddr = lp->mii.phy_id;
913 DBG(3, dev, "%s\n", __func__);
915 /* Enter Link Disable state */
916 cfg1 = smc_phy_read(dev, phyaddr, PHY_CFG1_REG);
917 cfg1 |= PHY_CFG1_LNKDIS;
918 smc_phy_write(dev, phyaddr, PHY_CFG1_REG, cfg1);
921 * Set our fixed capabilities
922 * Disable auto-negotiation
927 bmcr |= BMCR_FULLDPLX;
929 if (lp->ctl_rspeed == 100)
930 bmcr |= BMCR_SPEED100;
932 /* Write our capabilities to the phy control register */
933 smc_phy_write(dev, phyaddr, MII_BMCR, bmcr);
935 /* Re-Configure the Receive/Phy Control register */
936 SMC_SELECT_BANK(lp, 0);
937 SMC_SET_RPC(lp, lp->rpc_cur_mode);
938 SMC_SELECT_BANK(lp, 2);
944 * smc_phy_reset - reset the phy
948 * Issue a software reset for the specified PHY and
949 * wait up to 100ms for the reset to complete. We should
950 * not access the PHY for 50ms after issuing the reset.
952 * The time to wait appears to be dependent on the PHY.
954 * Must be called with lp->lock locked.
956 static int smc_phy_reset(struct net_device *dev, int phy)
958 struct smc_local *lp = netdev_priv(dev);
962 smc_phy_write(dev, phy, MII_BMCR, BMCR_RESET);
964 for (timeout = 2; timeout; timeout--) {
965 spin_unlock_irq(&lp->lock);
967 spin_lock_irq(&lp->lock);
969 bmcr = smc_phy_read(dev, phy, MII_BMCR);
970 if (!(bmcr & BMCR_RESET))
974 return bmcr & BMCR_RESET;
978 * smc_phy_powerdown - powerdown phy
981 * Power down the specified PHY
983 static void smc_phy_powerdown(struct net_device *dev)
985 struct smc_local *lp = netdev_priv(dev);
987 int phy = lp->mii.phy_id;
989 if (lp->phy_type == 0)
992 /* We need to ensure that no calls to smc_phy_configure are
995 cancel_work_sync(&lp->phy_configure);
997 bmcr = smc_phy_read(dev, phy, MII_BMCR);
998 smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN);
1002 * smc_phy_check_media - check the media status and adjust TCR
1004 * @init: set true for initialisation
1006 * Select duplex mode depending on negotiation state. This
1007 * also updates our carrier state.
1009 static void smc_phy_check_media(struct net_device *dev, int init)
1011 struct smc_local *lp = netdev_priv(dev);
1012 void __iomem *ioaddr = lp->base;
1014 if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
1015 /* duplex state has changed */
1016 if (lp->mii.full_duplex) {
1017 lp->tcr_cur_mode |= TCR_SWFDUP;
1019 lp->tcr_cur_mode &= ~TCR_SWFDUP;
1022 SMC_SELECT_BANK(lp, 0);
1023 SMC_SET_TCR(lp, lp->tcr_cur_mode);
1028 * Configures the specified PHY through the MII management interface
1029 * using Autonegotiation.
1030 * Calls smc_phy_fixed() if the user has requested a certain config.
1031 * If RPC ANEG bit is set, the media selection is dependent purely on
1032 * the selection by the MII (either in the MII BMCR reg or the result
1033 * of autonegotiation.) If the RPC ANEG bit is cleared, the selection
1034 * is controlled by the RPC SPEED and RPC DPLX bits.
1036 static void smc_phy_configure(struct work_struct *work)
1038 struct smc_local *lp =
1039 container_of(work, struct smc_local, phy_configure);
1040 struct net_device *dev = lp->dev;
1041 void __iomem *ioaddr = lp->base;
1042 int phyaddr = lp->mii.phy_id;
1043 int my_phy_caps; /* My PHY capabilities */
1044 int my_ad_caps; /* My Advertised capabilities */
1047 DBG(3, dev, "smc_program_phy()\n");
1049 spin_lock_irq(&lp->lock);
1052 * We should not be called if phy_type is zero.
1054 if (lp->phy_type == 0)
1055 goto smc_phy_configure_exit;
1057 if (smc_phy_reset(dev, phyaddr)) {
1058 netdev_info(dev, "PHY reset timed out\n");
1059 goto smc_phy_configure_exit;
1063 * Enable PHY Interrupts (for register 18)
1064 * Interrupts listed here are disabled
1066 smc_phy_write(dev, phyaddr, PHY_MASK_REG,
1067 PHY_INT_LOSSSYNC | PHY_INT_CWRD | PHY_INT_SSD |
1068 PHY_INT_ESD | PHY_INT_RPOL | PHY_INT_JAB |
1069 PHY_INT_SPDDET | PHY_INT_DPLXDET);
1071 /* Configure the Receive/Phy Control register */
1072 SMC_SELECT_BANK(lp, 0);
1073 SMC_SET_RPC(lp, lp->rpc_cur_mode);
1075 /* If the user requested no auto neg, then go set his request */
1076 if (lp->mii.force_media) {
1078 goto smc_phy_configure_exit;
1081 /* Copy our capabilities from MII_BMSR to MII_ADVERTISE */
1082 my_phy_caps = smc_phy_read(dev, phyaddr, MII_BMSR);
1084 if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
1085 netdev_info(dev, "Auto negotiation NOT supported\n");
1087 goto smc_phy_configure_exit;
1090 my_ad_caps = ADVERTISE_CSMA; /* I am CSMA capable */
1092 if (my_phy_caps & BMSR_100BASE4)
1093 my_ad_caps |= ADVERTISE_100BASE4;
1094 if (my_phy_caps & BMSR_100FULL)
1095 my_ad_caps |= ADVERTISE_100FULL;
1096 if (my_phy_caps & BMSR_100HALF)
1097 my_ad_caps |= ADVERTISE_100HALF;
1098 if (my_phy_caps & BMSR_10FULL)
1099 my_ad_caps |= ADVERTISE_10FULL;
1100 if (my_phy_caps & BMSR_10HALF)
1101 my_ad_caps |= ADVERTISE_10HALF;
1103 /* Disable capabilities not selected by our user */
1104 if (lp->ctl_rspeed != 100)
1105 my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF);
1107 if (!lp->ctl_rfduplx)
1108 my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL);
1110 /* Update our Auto-Neg Advertisement Register */
1111 smc_phy_write(dev, phyaddr, MII_ADVERTISE, my_ad_caps);
1112 lp->mii.advertising = my_ad_caps;
1115 * Read the register back. Without this, it appears that when
1116 * auto-negotiation is restarted, sometimes it isn't ready and
1117 * the link does not come up.
1119 status = smc_phy_read(dev, phyaddr, MII_ADVERTISE);
1121 DBG(2, dev, "phy caps=%x\n", my_phy_caps);
1122 DBG(2, dev, "phy advertised caps=%x\n", my_ad_caps);
1124 /* Restart auto-negotiation process in order to advertise my caps */
1125 smc_phy_write(dev, phyaddr, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
1127 smc_phy_check_media(dev, 1);
1129 smc_phy_configure_exit:
1130 SMC_SELECT_BANK(lp, 2);
1131 spin_unlock_irq(&lp->lock);
1137 * Purpose: Handle interrupts relating to PHY register 18. This is
1138 * called from the "hard" interrupt handler under our private spinlock.
1140 static void smc_phy_interrupt(struct net_device *dev)
1142 struct smc_local *lp = netdev_priv(dev);
1143 int phyaddr = lp->mii.phy_id;
1146 DBG(2, dev, "%s\n", __func__);
1148 if (lp->phy_type == 0)
1152 smc_phy_check_media(dev, 0);
1154 /* Read PHY Register 18, Status Output */
1155 phy18 = smc_phy_read(dev, phyaddr, PHY_INT_REG);
1156 if ((phy18 & PHY_INT_INT) == 0)
1161 /*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/
1163 static void smc_10bt_check_media(struct net_device *dev, int init)
1165 struct smc_local *lp = netdev_priv(dev);
1166 void __iomem *ioaddr = lp->base;
1167 unsigned int old_carrier, new_carrier;
1169 old_carrier = netif_carrier_ok(dev) ? 1 : 0;
1171 SMC_SELECT_BANK(lp, 0);
1172 new_carrier = (SMC_GET_EPH_STATUS(lp) & ES_LINK_OK) ? 1 : 0;
1173 SMC_SELECT_BANK(lp, 2);
1175 if (init || (old_carrier != new_carrier)) {
1177 netif_carrier_off(dev);
1179 netif_carrier_on(dev);
1181 if (netif_msg_link(lp))
1182 netdev_info(dev, "link %s\n",
1183 new_carrier ? "up" : "down");
1187 static void smc_eph_interrupt(struct net_device *dev)
1189 struct smc_local *lp = netdev_priv(dev);
1190 void __iomem *ioaddr = lp->base;
1193 smc_10bt_check_media(dev, 0);
1195 SMC_SELECT_BANK(lp, 1);
1196 ctl = SMC_GET_CTL(lp);
1197 SMC_SET_CTL(lp, ctl & ~CTL_LE_ENABLE);
1198 SMC_SET_CTL(lp, ctl);
1199 SMC_SELECT_BANK(lp, 2);
1203 * This is the main routine of the driver, to handle the device when
1204 * it needs some attention.
1206 static irqreturn_t smc_interrupt(int irq, void *dev_id)
1208 struct net_device *dev = dev_id;
1209 struct smc_local *lp = netdev_priv(dev);
1210 void __iomem *ioaddr = lp->base;
1211 int status, mask, timeout, card_stats;
1214 DBG(3, dev, "%s\n", __func__);
1216 spin_lock(&lp->lock);
1218 /* A preamble may be used when there is a potential race
1219 * between the interruptible transmit functions and this
1221 SMC_INTERRUPT_PREAMBLE;
1223 saved_pointer = SMC_GET_PTR(lp);
1224 mask = SMC_GET_INT_MASK(lp);
1225 SMC_SET_INT_MASK(lp, 0);
1227 /* set a timeout value, so I don't stay here forever */
1228 timeout = MAX_IRQ_LOOPS;
1231 status = SMC_GET_INT(lp);
1233 DBG(2, dev, "INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n",
1235 ({ int meminfo; SMC_SELECT_BANK(lp, 0);
1236 meminfo = SMC_GET_MIR(lp);
1237 SMC_SELECT_BANK(lp, 2); meminfo; }),
1244 if (status & IM_TX_INT) {
1245 /* do this before RX as it will free memory quickly */
1246 DBG(3, dev, "TX int\n");
1248 SMC_ACK_INT(lp, IM_TX_INT);
1249 if (THROTTLE_TX_PKTS)
1250 netif_wake_queue(dev);
1251 } else if (status & IM_RCV_INT) {
1252 DBG(3, dev, "RX irq\n");
1254 } else if (status & IM_ALLOC_INT) {
1255 DBG(3, dev, "Allocation irq\n");
1256 tasklet_hi_schedule(&lp->tx_task);
1257 mask &= ~IM_ALLOC_INT;
1258 } else if (status & IM_TX_EMPTY_INT) {
1259 DBG(3, dev, "TX empty\n");
1260 mask &= ~IM_TX_EMPTY_INT;
1263 SMC_SELECT_BANK(lp, 0);
1264 card_stats = SMC_GET_COUNTER(lp);
1265 SMC_SELECT_BANK(lp, 2);
1267 /* single collisions */
1268 dev->stats.collisions += card_stats & 0xF;
1271 /* multiple collisions */
1272 dev->stats.collisions += card_stats & 0xF;
1273 } else if (status & IM_RX_OVRN_INT) {
1274 DBG(1, dev, "RX overrun (EPH_ST 0x%04x)\n",
1275 ({ int eph_st; SMC_SELECT_BANK(lp, 0);
1276 eph_st = SMC_GET_EPH_STATUS(lp);
1277 SMC_SELECT_BANK(lp, 2); eph_st; }));
1278 SMC_ACK_INT(lp, IM_RX_OVRN_INT);
1279 dev->stats.rx_errors++;
1280 dev->stats.rx_fifo_errors++;
1281 } else if (status & IM_EPH_INT) {
1282 smc_eph_interrupt(dev);
1283 } else if (status & IM_MDINT) {
1284 SMC_ACK_INT(lp, IM_MDINT);
1285 smc_phy_interrupt(dev);
1286 } else if (status & IM_ERCV_INT) {
1287 SMC_ACK_INT(lp, IM_ERCV_INT);
1288 PRINTK(dev, "UNSUPPORTED: ERCV INTERRUPT\n");
1290 } while (--timeout);
1292 /* restore register states */
1293 SMC_SET_PTR(lp, saved_pointer);
1294 SMC_SET_INT_MASK(lp, mask);
1295 spin_unlock(&lp->lock);
1297 #ifndef CONFIG_NET_POLL_CONTROLLER
1298 if (timeout == MAX_IRQ_LOOPS)
1299 PRINTK(dev, "spurious interrupt (mask = 0x%02x)\n",
1302 DBG(3, dev, "Interrupt done (%d loops)\n",
1303 MAX_IRQ_LOOPS - timeout);
1306 * We return IRQ_HANDLED unconditionally here even if there was
1307 * nothing to do. There is a possibility that a packet might
1308 * get enqueued into the chip right after TX_EMPTY_INT is raised
1309 * but just before the CPU acknowledges the IRQ.
1310 * Better take an unneeded IRQ in some occasions than complexifying
1311 * the code for all cases.
1316 #ifdef CONFIG_NET_POLL_CONTROLLER
1318 * Polling receive - used by netconsole and other diagnostic tools
1319 * to allow network i/o with interrupts disabled.
1321 static void smc_poll_controller(struct net_device *dev)
1323 disable_irq(dev->irq);
1324 smc_interrupt(dev->irq, dev);
1325 enable_irq(dev->irq);
1329 /* Our watchdog timed out. Called by the networking layer */
1330 static void smc_timeout(struct net_device *dev)
1332 struct smc_local *lp = netdev_priv(dev);
1333 void __iomem *ioaddr = lp->base;
1334 int status, mask, eph_st, meminfo, fifo;
1336 DBG(2, dev, "%s\n", __func__);
1338 spin_lock_irq(&lp->lock);
1339 status = SMC_GET_INT(lp);
1340 mask = SMC_GET_INT_MASK(lp);
1341 fifo = SMC_GET_FIFO(lp);
1342 SMC_SELECT_BANK(lp, 0);
1343 eph_st = SMC_GET_EPH_STATUS(lp);
1344 meminfo = SMC_GET_MIR(lp);
1345 SMC_SELECT_BANK(lp, 2);
1346 spin_unlock_irq(&lp->lock);
1347 PRINTK(dev, "TX timeout (INT 0x%02x INTMASK 0x%02x MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n",
1348 status, mask, meminfo, fifo, eph_st);
1354 * Reconfiguring the PHY doesn't seem like a bad idea here, but
1355 * smc_phy_configure() calls msleep() which calls schedule_timeout()
1356 * which calls schedule(). Hence we use a work queue.
1358 if (lp->phy_type != 0)
1359 schedule_work(&lp->phy_configure);
1361 /* We can accept TX packets again */
1362 dev->trans_start = jiffies; /* prevent tx timeout */
1363 netif_wake_queue(dev);
1367 * This routine will, depending on the values passed to it,
1368 * either make it accept multicast packets, go into
1369 * promiscuous mode (for TCPDUMP and cousins) or accept
1370 * a select set of multicast packets
1372 static void smc_set_multicast_list(struct net_device *dev)
1374 struct smc_local *lp = netdev_priv(dev);
1375 void __iomem *ioaddr = lp->base;
1376 unsigned char multicast_table[8];
1377 int update_multicast = 0;
1379 DBG(2, dev, "%s\n", __func__);
1381 if (dev->flags & IFF_PROMISC) {
1382 DBG(2, dev, "RCR_PRMS\n");
1383 lp->rcr_cur_mode |= RCR_PRMS;
1386 /* BUG? I never disable promiscuous mode if multicasting was turned on.
1387 Now, I turn off promiscuous mode, but I don't do anything to multicasting
1388 when promiscuous mode is turned on.
1392 * Here, I am setting this to accept all multicast packets.
1393 * I don't need to zero the multicast table, because the flag is
1394 * checked before the table is
1396 else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) {
1397 DBG(2, dev, "RCR_ALMUL\n");
1398 lp->rcr_cur_mode |= RCR_ALMUL;
1402 * This sets the internal hardware table to filter out unwanted
1403 * multicast packets before they take up memory.
1405 * The SMC chip uses a hash table where the high 6 bits of the CRC of
1406 * address are the offset into the table. If that bit is 1, then the
1407 * multicast packet is accepted. Otherwise, it's dropped silently.
1409 * To use the 6 bits as an offset into the table, the high 3 bits are
1410 * the number of the 8 bit register, while the low 3 bits are the bit
1411 * within that register.
1413 else if (!netdev_mc_empty(dev)) {
1414 struct netdev_hw_addr *ha;
1416 /* table for flipping the order of 3 bits */
1417 static const unsigned char invert3[] = {0, 4, 2, 6, 1, 5, 3, 7};
1419 /* start with a table of all zeros: reject all */
1420 memset(multicast_table, 0, sizeof(multicast_table));
1422 netdev_for_each_mc_addr(ha, dev) {
1425 /* only use the low order bits */
1426 position = crc32_le(~0, ha->addr, 6) & 0x3f;
1428 /* do some messy swapping to put the bit in the right spot */
1429 multicast_table[invert3[position&7]] |=
1430 (1<<invert3[(position>>3)&7]);
1433 /* be sure I get rid of flags I might have set */
1434 lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL);
1436 /* now, the table can be loaded into the chipset */
1437 update_multicast = 1;
1439 DBG(2, dev, "~(RCR_PRMS|RCR_ALMUL)\n");
1440 lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL);
1443 * since I'm disabling all multicast entirely, I need to
1444 * clear the multicast list
1446 memset(multicast_table, 0, sizeof(multicast_table));
1447 update_multicast = 1;
1450 spin_lock_irq(&lp->lock);
1451 SMC_SELECT_BANK(lp, 0);
1452 SMC_SET_RCR(lp, lp->rcr_cur_mode);
1453 if (update_multicast) {
1454 SMC_SELECT_BANK(lp, 3);
1455 SMC_SET_MCAST(lp, multicast_table);
1457 SMC_SELECT_BANK(lp, 2);
1458 spin_unlock_irq(&lp->lock);
1463 * Open and Initialize the board
1465 * Set up everything, reset the card, etc..
1468 smc_open(struct net_device *dev)
1470 struct smc_local *lp = netdev_priv(dev);
1472 DBG(2, dev, "%s\n", __func__);
1474 /* Setup the default Register Modes */
1475 lp->tcr_cur_mode = TCR_DEFAULT;
1476 lp->rcr_cur_mode = RCR_DEFAULT;
1477 lp->rpc_cur_mode = RPC_DEFAULT |
1478 lp->cfg.leda << RPC_LSXA_SHFT |
1479 lp->cfg.ledb << RPC_LSXB_SHFT;
1482 * If we are not using a MII interface, we need to
1483 * monitor our own carrier signal to detect faults.
1485 if (lp->phy_type == 0)
1486 lp->tcr_cur_mode |= TCR_MON_CSN;
1488 /* reset the hardware */
1492 /* Configure the PHY, initialize the link state */
1493 if (lp->phy_type != 0)
1494 smc_phy_configure(&lp->phy_configure);
1496 spin_lock_irq(&lp->lock);
1497 smc_10bt_check_media(dev, 1);
1498 spin_unlock_irq(&lp->lock);
1501 netif_start_queue(dev);
1508 * this makes the board clean up everything that it can
1509 * and not talk to the outside world. Caused by
1510 * an 'ifconfig ethX down'
1512 static int smc_close(struct net_device *dev)
1514 struct smc_local *lp = netdev_priv(dev);
1516 DBG(2, dev, "%s\n", __func__);
1518 netif_stop_queue(dev);
1519 netif_carrier_off(dev);
1521 /* clear everything */
1523 tasklet_kill(&lp->tx_task);
1524 smc_phy_powerdown(dev);
1532 smc_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
1534 struct smc_local *lp = netdev_priv(dev);
1540 if (lp->phy_type != 0) {
1541 spin_lock_irq(&lp->lock);
1542 ret = mii_ethtool_gset(&lp->mii, cmd);
1543 spin_unlock_irq(&lp->lock);
1545 cmd->supported = SUPPORTED_10baseT_Half |
1546 SUPPORTED_10baseT_Full |
1547 SUPPORTED_TP | SUPPORTED_AUI;
1549 if (lp->ctl_rspeed == 10)
1550 ethtool_cmd_speed_set(cmd, SPEED_10);
1551 else if (lp->ctl_rspeed == 100)
1552 ethtool_cmd_speed_set(cmd, SPEED_100);
1554 cmd->autoneg = AUTONEG_DISABLE;
1555 cmd->transceiver = XCVR_INTERNAL;
1557 cmd->duplex = lp->tcr_cur_mode & TCR_SWFDUP ? DUPLEX_FULL : DUPLEX_HALF;
1566 smc_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
1568 struct smc_local *lp = netdev_priv(dev);
1571 if (lp->phy_type != 0) {
1572 spin_lock_irq(&lp->lock);
1573 ret = mii_ethtool_sset(&lp->mii, cmd);
1574 spin_unlock_irq(&lp->lock);
1576 if (cmd->autoneg != AUTONEG_DISABLE ||
1577 cmd->speed != SPEED_10 ||
1578 (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) ||
1579 (cmd->port != PORT_TP && cmd->port != PORT_AUI))
1582 // lp->port = cmd->port;
1583 lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL;
1585 // if (netif_running(dev))
1586 // smc_set_port(dev);
1595 smc_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1597 strlcpy(info->driver, CARDNAME, sizeof(info->driver));
1598 strlcpy(info->version, version, sizeof(info->version));
1599 strlcpy(info->bus_info, dev_name(dev->dev.parent),
1600 sizeof(info->bus_info));
1603 static int smc_ethtool_nwayreset(struct net_device *dev)
1605 struct smc_local *lp = netdev_priv(dev);
1608 if (lp->phy_type != 0) {
1609 spin_lock_irq(&lp->lock);
1610 ret = mii_nway_restart(&lp->mii);
1611 spin_unlock_irq(&lp->lock);
1617 static u32 smc_ethtool_getmsglevel(struct net_device *dev)
1619 struct smc_local *lp = netdev_priv(dev);
1620 return lp->msg_enable;
1623 static void smc_ethtool_setmsglevel(struct net_device *dev, u32 level)
1625 struct smc_local *lp = netdev_priv(dev);
1626 lp->msg_enable = level;
1629 static int smc_write_eeprom_word(struct net_device *dev, u16 addr, u16 word)
1632 struct smc_local *lp = netdev_priv(dev);
1633 void __iomem *ioaddr = lp->base;
1635 spin_lock_irq(&lp->lock);
1636 /* load word into GP register */
1637 SMC_SELECT_BANK(lp, 1);
1638 SMC_SET_GP(lp, word);
1639 /* set the address to put the data in EEPROM */
1640 SMC_SELECT_BANK(lp, 2);
1641 SMC_SET_PTR(lp, addr);
1642 /* tell it to write */
1643 SMC_SELECT_BANK(lp, 1);
1644 ctl = SMC_GET_CTL(lp);
1645 SMC_SET_CTL(lp, ctl | (CTL_EEPROM_SELECT | CTL_STORE));
1646 /* wait for it to finish */
1649 } while (SMC_GET_CTL(lp) & CTL_STORE);
1651 SMC_SET_CTL(lp, ctl);
1652 SMC_SELECT_BANK(lp, 2);
1653 spin_unlock_irq(&lp->lock);
1657 static int smc_read_eeprom_word(struct net_device *dev, u16 addr, u16 *word)
1660 struct smc_local *lp = netdev_priv(dev);
1661 void __iomem *ioaddr = lp->base;
1663 spin_lock_irq(&lp->lock);
1664 /* set the EEPROM address to get the data from */
1665 SMC_SELECT_BANK(lp, 2);
1666 SMC_SET_PTR(lp, addr | PTR_READ);
1667 /* tell it to load */
1668 SMC_SELECT_BANK(lp, 1);
1669 SMC_SET_GP(lp, 0xffff); /* init to known */
1670 ctl = SMC_GET_CTL(lp);
1671 SMC_SET_CTL(lp, ctl | (CTL_EEPROM_SELECT | CTL_RELOAD));
1672 /* wait for it to finish */
1675 } while (SMC_GET_CTL(lp) & CTL_RELOAD);
1676 /* read word from GP register */
1677 *word = SMC_GET_GP(lp);
1679 SMC_SET_CTL(lp, ctl);
1680 SMC_SELECT_BANK(lp, 2);
1681 spin_unlock_irq(&lp->lock);
1685 static int smc_ethtool_geteeprom_len(struct net_device *dev)
1690 static int smc_ethtool_geteeprom(struct net_device *dev,
1691 struct ethtool_eeprom *eeprom, u8 *data)
1696 DBG(1, dev, "Reading %d bytes at %d(0x%x)\n",
1697 eeprom->len, eeprom->offset, eeprom->offset);
1698 imax = smc_ethtool_geteeprom_len(dev);
1699 for (i = 0; i < eeprom->len; i += 2) {
1702 int offset = i + eeprom->offset;
1705 ret = smc_read_eeprom_word(dev, offset >> 1, &wbuf);
1708 DBG(2, dev, "Read 0x%x from 0x%x\n", wbuf, offset >> 1);
1709 data[i] = (wbuf >> 8) & 0xff;
1710 data[i+1] = wbuf & 0xff;
1715 static int smc_ethtool_seteeprom(struct net_device *dev,
1716 struct ethtool_eeprom *eeprom, u8 *data)
1721 DBG(1, dev, "Writing %d bytes to %d(0x%x)\n",
1722 eeprom->len, eeprom->offset, eeprom->offset);
1723 imax = smc_ethtool_geteeprom_len(dev);
1724 for (i = 0; i < eeprom->len; i += 2) {
1727 int offset = i + eeprom->offset;
1730 wbuf = (data[i] << 8) | data[i + 1];
1731 DBG(2, dev, "Writing 0x%x to 0x%x\n", wbuf, offset >> 1);
1732 ret = smc_write_eeprom_word(dev, offset >> 1, wbuf);
1740 static const struct ethtool_ops smc_ethtool_ops = {
1741 .get_settings = smc_ethtool_getsettings,
1742 .set_settings = smc_ethtool_setsettings,
1743 .get_drvinfo = smc_ethtool_getdrvinfo,
1745 .get_msglevel = smc_ethtool_getmsglevel,
1746 .set_msglevel = smc_ethtool_setmsglevel,
1747 .nway_reset = smc_ethtool_nwayreset,
1748 .get_link = ethtool_op_get_link,
1749 .get_eeprom_len = smc_ethtool_geteeprom_len,
1750 .get_eeprom = smc_ethtool_geteeprom,
1751 .set_eeprom = smc_ethtool_seteeprom,
1754 static const struct net_device_ops smc_netdev_ops = {
1755 .ndo_open = smc_open,
1756 .ndo_stop = smc_close,
1757 .ndo_start_xmit = smc_hard_start_xmit,
1758 .ndo_tx_timeout = smc_timeout,
1759 .ndo_set_rx_mode = smc_set_multicast_list,
1760 .ndo_change_mtu = eth_change_mtu,
1761 .ndo_validate_addr = eth_validate_addr,
1762 .ndo_set_mac_address = eth_mac_addr,
1763 #ifdef CONFIG_NET_POLL_CONTROLLER
1764 .ndo_poll_controller = smc_poll_controller,
1771 * This routine has a simple purpose -- make the SMC chip generate an
1772 * interrupt, so an auto-detect routine can detect it, and find the IRQ,
1775 * does this still work?
1777 * I just deleted auto_irq.c, since it was never built...
1780 static int smc_findirq(struct smc_local *lp)
1782 void __iomem *ioaddr = lp->base;
1784 unsigned long cookie;
1786 DBG(2, lp->dev, "%s: %s\n", CARDNAME, __func__);
1788 cookie = probe_irq_on();
1791 * What I try to do here is trigger an ALLOC_INT. This is done
1792 * by allocating a small chunk of memory, which will give an interrupt
1795 /* enable ALLOCation interrupts ONLY */
1796 SMC_SELECT_BANK(lp, 2);
1797 SMC_SET_INT_MASK(lp, IM_ALLOC_INT);
1800 * Allocate 512 bytes of memory. Note that the chip was just
1801 * reset so all the memory is available
1803 SMC_SET_MMU_CMD(lp, MC_ALLOC | 1);
1806 * Wait until positive that the interrupt has been generated
1811 int_status = SMC_GET_INT(lp);
1812 if (int_status & IM_ALLOC_INT)
1813 break; /* got the interrupt */
1814 } while (--timeout);
1817 * there is really nothing that I can do here if timeout fails,
1818 * as autoirq_report will return a 0 anyway, which is what I
1819 * want in this case. Plus, the clean up is needed in both
1823 /* and disable all interrupts again */
1824 SMC_SET_INT_MASK(lp, 0);
1826 /* and return what I found */
1827 return probe_irq_off(cookie);
1831 * Function: smc_probe(unsigned long ioaddr)
1834 * Tests to see if a given ioaddr points to an SMC91x chip.
1835 * Returns a 0 on success
1838 * (1) see if the high byte of BANK_SELECT is 0x33
1839 * (2) compare the ioaddr with the base register's address
1840 * (3) see if I recognize the chip ID in the appropriate register
1842 * Here I do typical initialization tasks.
1844 * o Initialize the structure if needed
1845 * o print out my vanity message if not done so already
1846 * o print out what type of hardware is detected
1847 * o print out the ethernet address
1849 * o set up my private data
1850 * o configure the dev structure with my subroutines
1851 * o actually GRAB the irq.
1854 static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
1855 unsigned long irq_flags)
1857 struct smc_local *lp = netdev_priv(dev);
1859 unsigned int val, revision_register;
1860 const char *version_string;
1862 DBG(2, dev, "%s: %s\n", CARDNAME, __func__);
1864 /* First, see if the high byte is 0x33 */
1865 val = SMC_CURRENT_BANK(lp);
1866 DBG(2, dev, "%s: bank signature probe returned 0x%04x\n",
1868 if ((val & 0xFF00) != 0x3300) {
1869 if ((val & 0xFF) == 0x33) {
1871 "%s: Detected possible byte-swapped interface at IOADDR %p\n",
1879 * The above MIGHT indicate a device, but I need to write to
1880 * further test this.
1882 SMC_SELECT_BANK(lp, 0);
1883 val = SMC_CURRENT_BANK(lp);
1884 if ((val & 0xFF00) != 0x3300) {
1890 * well, we've already written once, so hopefully another
1891 * time won't hurt. This time, I need to switch the bank
1892 * register to bank 1, so I can access the base address
1895 SMC_SELECT_BANK(lp, 1);
1896 val = SMC_GET_BASE(lp);
1897 val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT;
1898 if (((unsigned long)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) {
1899 netdev_warn(dev, "%s: IOADDR %p doesn't match configuration (%x).\n",
1900 CARDNAME, ioaddr, val);
1904 * check if the revision register is something that I
1905 * recognize. These might need to be added to later,
1906 * as future revisions could be added.
1908 SMC_SELECT_BANK(lp, 3);
1909 revision_register = SMC_GET_REV(lp);
1910 DBG(2, dev, "%s: revision = 0x%04x\n", CARDNAME, revision_register);
1911 version_string = chip_ids[ (revision_register >> 4) & 0xF];
1912 if (!version_string || (revision_register & 0xff00) != 0x3300) {
1913 /* I don't recognize this chip, so... */
1914 netdev_warn(dev, "%s: IO %p: Unrecognized revision register 0x%04x, Contact author.\n",
1915 CARDNAME, ioaddr, revision_register);
1921 /* At this point I'll assume that the chip is an SMC91x. */
1922 pr_info_once("%s\n", version);
1924 /* fill in some of the fields */
1925 dev->base_addr = (unsigned long)ioaddr;
1927 lp->version = revision_register & 0xff;
1928 spin_lock_init(&lp->lock);
1930 /* Get the MAC address */
1931 SMC_SELECT_BANK(lp, 1);
1932 SMC_GET_MAC_ADDR(lp, dev->dev_addr);
1934 /* now, reset the chip, and put it into a known state */
1938 * If dev->irq is 0, then the device has to be banged on to see
1941 * This banging doesn't always detect the IRQ, for unknown reasons.
1942 * a workaround is to reset the chip and try again.
1944 * Interestingly, the DOS packet driver *SETS* the IRQ on the card to
1945 * be what is requested on the command line. I don't do that, mostly
1946 * because the card that I have uses a non-standard method of accessing
1947 * the IRQs, and because this _should_ work in most configurations.
1949 * Specifying an IRQ is done with the assumption that the user knows
1950 * what (s)he is doing. No checking is done!!!!
1957 dev->irq = smc_findirq(lp);
1960 /* kick the card and try again */
1964 if (dev->irq == 0) {
1965 netdev_warn(dev, "Couldn't autodetect your IRQ. Use irq=xx.\n");
1969 dev->irq = irq_canonicalize(dev->irq);
1971 dev->watchdog_timeo = msecs_to_jiffies(watchdog);
1972 dev->netdev_ops = &smc_netdev_ops;
1973 dev->ethtool_ops = &smc_ethtool_ops;
1975 tasklet_init(&lp->tx_task, smc_hardware_send_pkt, (unsigned long)dev);
1976 INIT_WORK(&lp->phy_configure, smc_phy_configure);
1978 lp->mii.phy_id_mask = 0x1f;
1979 lp->mii.reg_num_mask = 0x1f;
1980 lp->mii.force_media = 0;
1981 lp->mii.full_duplex = 0;
1983 lp->mii.mdio_read = smc_phy_read;
1984 lp->mii.mdio_write = smc_phy_write;
1987 * Locate the phy, if any.
1989 if (lp->version >= (CHIP_91100 << 4))
1990 smc_phy_detect(dev);
1992 /* then shut everything down to save power */
1994 smc_phy_powerdown(dev);
1996 /* Set default parameters */
1997 lp->msg_enable = NETIF_MSG_LINK;
1998 lp->ctl_rfduplx = 0;
1999 lp->ctl_rspeed = 10;
2001 if (lp->version >= (CHIP_91100 << 4)) {
2002 lp->ctl_rfduplx = 1;
2003 lp->ctl_rspeed = 100;
2007 retval = request_irq(dev->irq, smc_interrupt, irq_flags, dev->name, dev);
2011 #ifdef CONFIG_ARCH_PXA
2012 # ifdef SMC_USE_PXA_DMA
2013 lp->cfg.flags |= SMC91X_USE_DMA;
2015 if (lp->cfg.flags & SMC91X_USE_DMA) {
2016 int dma = pxa_request_dma(dev->name, DMA_PRIO_LOW,
2017 smc_pxa_dma_irq, NULL);
2023 retval = register_netdev(dev);
2025 /* now, print out the card info, in a short format.. */
2026 netdev_info(dev, "%s (rev %d) at %p IRQ %d",
2027 version_string, revision_register & 0x0f,
2028 lp->base, dev->irq);
2030 if (dev->dma != (unsigned char)-1)
2031 pr_cont(" DMA %d", dev->dma);
2034 lp->cfg.flags & SMC91X_NOWAIT ? " [nowait]" : "",
2035 THROTTLE_TX_PKTS ? " [throttle_tx]" : "");
2037 if (!is_valid_ether_addr(dev->dev_addr)) {
2038 netdev_warn(dev, "Invalid ethernet MAC address. Please set using ifconfig\n");
2040 /* Print the Ethernet address */
2041 netdev_info(dev, "Ethernet addr: %pM\n",
2045 if (lp->phy_type == 0) {
2046 PRINTK(dev, "No PHY found\n");
2047 } else if ((lp->phy_type & 0xfffffff0) == 0x0016f840) {
2048 PRINTK(dev, "PHY LAN83C183 (LAN91C111 Internal)\n");
2049 } else if ((lp->phy_type & 0xfffffff0) == 0x02821c50) {
2050 PRINTK(dev, "PHY LAN83C180\n");
2055 #ifdef CONFIG_ARCH_PXA
2056 if (retval && dev->dma != (unsigned char)-1)
2057 pxa_free_dma(dev->dma);
2062 static int smc_enable_device(struct platform_device *pdev)
2064 struct net_device *ndev = platform_get_drvdata(pdev);
2065 struct smc_local *lp = netdev_priv(ndev);
2066 unsigned long flags;
2067 unsigned char ecor, ecsr;
2069 struct resource * res;
2071 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
2076 * Map the attribute space. This is overkill, but clean.
2078 addr = ioremap(res->start, ATTRIB_SIZE);
2083 * Reset the device. We must disable IRQs around this
2084 * since a reset causes the IRQ line become active.
2086 local_irq_save(flags);
2087 ecor = readb(addr + (ECOR << SMC_IO_SHIFT)) & ~ECOR_RESET;
2088 writeb(ecor | ECOR_RESET, addr + (ECOR << SMC_IO_SHIFT));
2089 readb(addr + (ECOR << SMC_IO_SHIFT));
2092 * Wait 100us for the chip to reset.
2097 * The device will ignore all writes to the enable bit while
2098 * reset is asserted, even if the reset bit is cleared in the
2099 * same write. Must clear reset first, then enable the device.
2101 writeb(ecor, addr + (ECOR << SMC_IO_SHIFT));
2102 writeb(ecor | ECOR_ENABLE, addr + (ECOR << SMC_IO_SHIFT));
2105 * Set the appropriate byte/word mode.
2107 ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8;
2110 writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT));
2111 local_irq_restore(flags);
2116 * Wait for the chip to wake up. We could poll the control
2117 * register in the main register space, but that isn't mapped
2118 * yet. We know this is going to take 750us.
2125 static int smc_request_attrib(struct platform_device *pdev,
2126 struct net_device *ndev)
2128 struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
2129 struct smc_local *lp __maybe_unused = netdev_priv(ndev);
2134 if (!request_mem_region(res->start, ATTRIB_SIZE, CARDNAME))
2140 static void smc_release_attrib(struct platform_device *pdev,
2141 struct net_device *ndev)
2143 struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
2144 struct smc_local *lp __maybe_unused = netdev_priv(ndev);
2147 release_mem_region(res->start, ATTRIB_SIZE);
2150 static inline void smc_request_datacs(struct platform_device *pdev, struct net_device *ndev)
2152 if (SMC_CAN_USE_DATACS) {
2153 struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32");
2154 struct smc_local *lp = netdev_priv(ndev);
2159 if(!request_mem_region(res->start, SMC_DATA_EXTENT, CARDNAME)) {
2160 netdev_info(ndev, "%s: failed to request datacs memory region.\n",
2165 lp->datacs = ioremap(res->start, SMC_DATA_EXTENT);
2169 static void smc_release_datacs(struct platform_device *pdev, struct net_device *ndev)
2171 if (SMC_CAN_USE_DATACS) {
2172 struct smc_local *lp = netdev_priv(ndev);
2173 struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32");
2176 iounmap(lp->datacs);
2181 release_mem_region(res->start, SMC_DATA_EXTENT);
2185 #if IS_BUILTIN(CONFIG_OF)
2186 static const struct of_device_id smc91x_match[] = {
2187 { .compatible = "smsc,lan91c94", },
2188 { .compatible = "smsc,lan91c111", },
2191 MODULE_DEVICE_TABLE(of, smc91x_match);
2194 * of_try_set_control_gpio - configure a gpio if it exists
2196 static int try_toggle_control_gpio(struct device *dev,
2197 struct gpio_desc **desc,
2198 const char *name, int index,
2199 int value, unsigned int nsdelay)
2201 struct gpio_desc *gpio = *desc;
2204 gpio = devm_gpiod_get_index(dev, name, index);
2206 if (PTR_ERR(gpio) == -ENOENT) {
2211 return PTR_ERR(gpio);
2213 res = gpiod_direction_output(gpio, !value);
2215 dev_err(dev, "unable to toggle gpio %s: %i\n", name, res);
2216 devm_gpiod_put(dev, gpio);
2221 usleep_range(nsdelay, 2 * nsdelay);
2222 gpiod_set_value_cansleep(gpio, value);
2232 * dev->base_addr == 0, try to find all possible locations
2233 * dev->base_addr > 0x1ff, this is the address to check
2234 * dev->base_addr == <anything else>, return failure code
2237 * 0 --> there is a device
2238 * anything else, error
2240 static int smc_drv_probe(struct platform_device *pdev)
2242 struct smc91x_platdata *pd = dev_get_platdata(&pdev->dev);
2243 const struct of_device_id *match = NULL;
2244 struct smc_local *lp;
2245 struct net_device *ndev;
2246 struct resource *res;
2247 unsigned int __iomem *addr;
2248 unsigned long irq_flags = SMC_IRQ_FLAGS;
2249 unsigned long irq_resflags;
2252 ndev = alloc_etherdev(sizeof(struct smc_local));
2257 SET_NETDEV_DEV(ndev, &pdev->dev);
2259 /* get configuration from platform data, only allow use of
2260 * bus width if both SMC_CAN_USE_xxx and SMC91X_USE_xxx are set.
2263 lp = netdev_priv(ndev);
2267 memcpy(&lp->cfg, pd, sizeof(lp->cfg));
2268 lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags);
2271 #if IS_BUILTIN(CONFIG_OF)
2272 match = of_match_device(of_match_ptr(smc91x_match), &pdev->dev);
2274 struct device_node *np = pdev->dev.of_node;
2277 /* Optional pwrdwn GPIO configured? */
2278 ret = try_toggle_control_gpio(&pdev->dev, &lp->power_gpio,
2279 "power", 0, 0, 100);
2284 * Optional reset GPIO configured? Minimum 100 ns reset needed
2285 * according to LAN91C96 datasheet page 14.
2287 ret = try_toggle_control_gpio(&pdev->dev, &lp->reset_gpio,
2288 "reset", 0, 0, 100);
2293 * Need to wait for optional EEPROM to load, max 750 us according
2294 * to LAN91C96 datasheet page 55.
2297 usleep_range(750, 1000);
2299 /* Combination of IO widths supported, default to 16-bit */
2300 if (!of_property_read_u32(np, "reg-io-width", &val)) {
2302 lp->cfg.flags |= SMC91X_USE_8BIT;
2303 if ((val == 0) || (val & 2))
2304 lp->cfg.flags |= SMC91X_USE_16BIT;
2306 lp->cfg.flags |= SMC91X_USE_32BIT;
2308 lp->cfg.flags |= SMC91X_USE_16BIT;
2313 if (!pd && !match) {
2314 lp->cfg.flags |= (SMC_CAN_USE_8BIT) ? SMC91X_USE_8BIT : 0;
2315 lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0;
2316 lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0;
2317 lp->cfg.flags |= (nowait) ? SMC91X_NOWAIT : 0;
2320 if (!lp->cfg.leda && !lp->cfg.ledb) {
2321 lp->cfg.leda = RPC_LSA_DEFAULT;
2322 lp->cfg.ledb = RPC_LSB_DEFAULT;
2325 ndev->dma = (unsigned char)-1;
2327 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
2329 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2332 goto out_free_netdev;
2336 if (!request_mem_region(res->start, SMC_IO_EXTENT, CARDNAME)) {
2338 goto out_free_netdev;
2341 ndev->irq = platform_get_irq(pdev, 0);
2342 if (ndev->irq <= 0) {
2344 goto out_release_io;
2347 * If this platform does not specify any special irqflags, or if
2348 * the resource supplies a trigger, override the irqflags with
2349 * the trigger flags from the resource.
2351 irq_resflags = irqd_get_trigger_type(irq_get_irq_data(ndev->irq));
2352 if (irq_flags == -1 || irq_resflags & IRQF_TRIGGER_MASK)
2353 irq_flags = irq_resflags & IRQF_TRIGGER_MASK;
2355 ret = smc_request_attrib(pdev, ndev);
2357 goto out_release_io;
2358 #if defined(CONFIG_SA1100_ASSABET)
2359 neponset_ncr_set(NCR_ENET_OSC_EN);
2361 platform_set_drvdata(pdev, ndev);
2362 ret = smc_enable_device(pdev);
2364 goto out_release_attrib;
2366 addr = ioremap(res->start, SMC_IO_EXTENT);
2369 goto out_release_attrib;
2372 #ifdef CONFIG_ARCH_PXA
2374 struct smc_local *lp = netdev_priv(ndev);
2375 lp->device = &pdev->dev;
2376 lp->physaddr = res->start;
2380 ret = smc_probe(ndev, addr, irq_flags);
2384 smc_request_datacs(pdev, ndev);
2391 smc_release_attrib(pdev, ndev);
2393 release_mem_region(res->start, SMC_IO_EXTENT);
2397 pr_info("%s: not found (%d).\n", CARDNAME, ret);
2402 static int smc_drv_remove(struct platform_device *pdev)
2404 struct net_device *ndev = platform_get_drvdata(pdev);
2405 struct smc_local *lp = netdev_priv(ndev);
2406 struct resource *res;
2408 unregister_netdev(ndev);
2410 free_irq(ndev->irq, ndev);
2412 #ifdef CONFIG_ARCH_PXA
2413 if (ndev->dma != (unsigned char)-1)
2414 pxa_free_dma(ndev->dma);
2418 smc_release_datacs(pdev,ndev);
2419 smc_release_attrib(pdev,ndev);
2421 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
2423 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2424 release_mem_region(res->start, SMC_IO_EXTENT);
2431 static int smc_drv_suspend(struct device *dev)
2433 struct platform_device *pdev = to_platform_device(dev);
2434 struct net_device *ndev = platform_get_drvdata(pdev);
2437 if (netif_running(ndev)) {
2438 netif_device_detach(ndev);
2440 smc_phy_powerdown(ndev);
2446 static int smc_drv_resume(struct device *dev)
2448 struct platform_device *pdev = to_platform_device(dev);
2449 struct net_device *ndev = platform_get_drvdata(pdev);
2452 struct smc_local *lp = netdev_priv(ndev);
2453 smc_enable_device(pdev);
2454 if (netif_running(ndev)) {
2457 if (lp->phy_type != 0)
2458 smc_phy_configure(&lp->phy_configure);
2459 netif_device_attach(ndev);
2465 static struct dev_pm_ops smc_drv_pm_ops = {
2466 .suspend = smc_drv_suspend,
2467 .resume = smc_drv_resume,
2470 static struct platform_driver smc_driver = {
2471 .probe = smc_drv_probe,
2472 .remove = smc_drv_remove,
2475 .owner = THIS_MODULE,
2476 .pm = &smc_drv_pm_ops,
2477 .of_match_table = of_match_ptr(smc91x_match),
2481 module_platform_driver(smc_driver);