1 /*******************************************************************************
3 Intel 10 Gigabit PCI Express Linux driver
4 Copyright(c) 1999 - 2014 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
29 #include <linux/pci.h>
30 #include <linux/delay.h>
31 #include <linux/sched.h>
34 #include "ixgbe_phy.h"
35 #include "ixgbe_mbx.h"
37 #define IXGBE_82599_MAX_TX_QUEUES 128
38 #define IXGBE_82599_MAX_RX_QUEUES 128
39 #define IXGBE_82599_RAR_ENTRIES 128
40 #define IXGBE_82599_MC_TBL_SIZE 128
41 #define IXGBE_82599_VFT_TBL_SIZE 128
42 #define IXGBE_82599_RX_PB_SIZE 512
44 static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
45 static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
46 static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
47 static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
48 ixgbe_link_speed speed,
49 bool autoneg_wait_to_complete);
50 static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
51 ixgbe_link_speed speed,
52 bool autoneg_wait_to_complete);
53 static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw);
54 static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
55 bool autoneg_wait_to_complete);
56 static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
57 ixgbe_link_speed speed,
58 bool autoneg_wait_to_complete);
59 static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
60 ixgbe_link_speed speed,
61 bool autoneg_wait_to_complete);
62 static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
63 static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
64 u8 dev_addr, u8 *data);
65 static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
66 u8 dev_addr, u8 data);
67 static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
68 static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
70 bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
72 u32 fwsm, manc, factps;
74 fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw));
75 if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT)
78 manc = IXGBE_READ_REG(hw, IXGBE_MANC);
79 if (!(manc & IXGBE_MANC_RCV_TCO_EN))
82 factps = IXGBE_READ_REG(hw, IXGBE_FACTPS(hw));
83 if (factps & IXGBE_FACTPS_MNGCG)
89 static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
91 struct ixgbe_mac_info *mac = &hw->mac;
93 /* enable the laser control functions for SFP+ fiber
96 if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
97 !ixgbe_mng_enabled(hw)) {
98 mac->ops.disable_tx_laser =
99 &ixgbe_disable_tx_laser_multispeed_fiber;
100 mac->ops.enable_tx_laser =
101 &ixgbe_enable_tx_laser_multispeed_fiber;
102 mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
104 mac->ops.disable_tx_laser = NULL;
105 mac->ops.enable_tx_laser = NULL;
106 mac->ops.flap_tx_laser = NULL;
109 if (hw->phy.multispeed_fiber) {
110 /* Set up dual speed SFP+ support */
111 mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
113 if ((mac->ops.get_media_type(hw) ==
114 ixgbe_media_type_backplane) &&
115 (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
116 hw->phy.smart_speed == ixgbe_smart_speed_on) &&
117 !ixgbe_verify_lesm_fw_enabled_82599(hw))
118 mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
120 mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
124 static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
127 u16 list_offset, data_offset, data_value;
129 if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
130 ixgbe_init_mac_link_ops_82599(hw);
132 hw->phy.ops.reset = NULL;
134 ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
139 /* PHY config will finish before releasing the semaphore */
140 ret_val = hw->mac.ops.acquire_swfw_sync(hw,
141 IXGBE_GSSR_MAC_CSR_SM);
143 return IXGBE_ERR_SWFW_SYNC;
145 if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
147 while (data_value != 0xffff) {
148 IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
149 IXGBE_WRITE_FLUSH(hw);
150 if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
154 /* Release the semaphore */
155 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
157 * Delay obtaining semaphore again to allow FW access,
158 * semaphore_delay is in ms usleep_range needs us.
160 usleep_range(hw->eeprom.semaphore_delay * 1000,
161 hw->eeprom.semaphore_delay * 2000);
163 /* Restart DSP and set SFI mode */
164 ret_val = hw->mac.ops.prot_autoc_write(hw,
165 hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL,
169 hw_dbg(hw, " sfp module setup not complete\n");
170 return IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
177 /* Release the semaphore */
178 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
179 /* Delay obtaining semaphore again to allow FW access,
180 * semaphore_delay is in ms usleep_range needs us.
182 usleep_range(hw->eeprom.semaphore_delay * 1000,
183 hw->eeprom.semaphore_delay * 2000);
184 hw_err(hw, "eeprom read at offset %d failed\n", data_offset);
185 return IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
189 * prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read
190 * @hw: pointer to hardware structure
191 * @locked: Return the if we locked for this read.
192 * @reg_val: Value we read from AUTOC
194 * For this part (82599) we need to wrap read-modify-writes with a possible
195 * FW/SW lock. It is assumed this lock will be freed with the next
196 * prot_autoc_write_82599(). Note, that locked can only be true in cases
197 * where this function doesn't return an error.
199 static s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked,
205 /* If LESM is on then we need to hold the SW/FW semaphore. */
206 if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
207 ret_val = hw->mac.ops.acquire_swfw_sync(hw,
208 IXGBE_GSSR_MAC_CSR_SM);
210 return IXGBE_ERR_SWFW_SYNC;
215 *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
220 * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
221 * @hw: pointer to hardware structure
222 * @reg_val: value to write to AUTOC
223 * @locked: bool to indicate whether the SW/FW lock was already taken by
224 * previous proc_autoc_read_82599.
226 * This part (82599) may need to hold a the SW/FW lock around all writes to
227 * AUTOC. Likewise after a write we need to do a pipeline reset.
229 static s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
233 /* Blocked by MNG FW so bail */
234 if (ixgbe_check_reset_blocked(hw))
237 /* We only need to get the lock if:
238 * - We didn't do it already (in the read part of a read-modify-write)
241 if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) {
242 ret_val = hw->mac.ops.acquire_swfw_sync(hw,
243 IXGBE_GSSR_MAC_CSR_SM);
245 return IXGBE_ERR_SWFW_SYNC;
250 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
251 ret_val = ixgbe_reset_pipeline_82599(hw);
254 /* Free the SW/FW semaphore as we either grabbed it here or
255 * already had it when this function was called.
258 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
263 static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
265 struct ixgbe_mac_info *mac = &hw->mac;
267 ixgbe_init_mac_link_ops_82599(hw);
269 mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
270 mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
271 mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
272 mac->rx_pb_size = IXGBE_82599_RX_PB_SIZE;
273 mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
274 mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
275 mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
281 * ixgbe_init_phy_ops_82599 - PHY/SFP specific init
282 * @hw: pointer to hardware structure
284 * Initialize any function pointers that were not able to be
285 * set during get_invariants because the PHY/SFP type was
286 * not known. Perform the SFP init if necessary.
289 static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
291 struct ixgbe_mac_info *mac = &hw->mac;
292 struct ixgbe_phy_info *phy = &hw->phy;
296 if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) {
297 /* Store flag indicating I2C bus access control unit. */
298 hw->phy.qsfp_shared_i2c_bus = true;
300 /* Initialize access to QSFP+ I2C bus */
301 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
302 esdp |= IXGBE_ESDP_SDP0_DIR;
303 esdp &= ~IXGBE_ESDP_SDP1_DIR;
304 esdp &= ~IXGBE_ESDP_SDP0;
305 esdp &= ~IXGBE_ESDP_SDP0_NATIVE;
306 esdp &= ~IXGBE_ESDP_SDP1_NATIVE;
307 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
308 IXGBE_WRITE_FLUSH(hw);
310 phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599;
311 phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599;
314 /* Identify the PHY or SFP module */
315 ret_val = phy->ops.identify(hw);
317 /* Setup function pointers based on detected SFP module and speeds */
318 ixgbe_init_mac_link_ops_82599(hw);
320 /* If copper media, overwrite with copper function pointers */
321 if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
322 mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
323 mac->ops.get_link_capabilities =
324 &ixgbe_get_copper_link_capabilities_generic;
327 /* Set necessary function pointers based on phy type */
328 switch (hw->phy.type) {
330 phy->ops.check_link = &ixgbe_check_phy_link_tnx;
331 phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
332 phy->ops.get_firmware_version =
333 &ixgbe_get_phy_firmware_version_tnx;
343 * ixgbe_get_link_capabilities_82599 - Determines link capabilities
344 * @hw: pointer to hardware structure
345 * @speed: pointer to link speed
346 * @autoneg: true when autoneg or autotry is enabled
348 * Determines the link capabilities by reading the AUTOC register.
350 static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
351 ixgbe_link_speed *speed,
356 /* Determine 1G link capabilities off of SFP+ type */
357 if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
358 hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
359 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
360 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
361 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
362 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
363 *speed = IXGBE_LINK_SPEED_1GB_FULL;
369 * Determine link capabilities based on the stored value of AUTOC,
370 * which represents EEPROM defaults. If AUTOC value has not been
371 * stored, use the current register value.
373 if (hw->mac.orig_link_settings_stored)
374 autoc = hw->mac.orig_autoc;
376 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
378 switch (autoc & IXGBE_AUTOC_LMS_MASK) {
379 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
380 *speed = IXGBE_LINK_SPEED_1GB_FULL;
384 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
385 *speed = IXGBE_LINK_SPEED_10GB_FULL;
389 case IXGBE_AUTOC_LMS_1G_AN:
390 *speed = IXGBE_LINK_SPEED_1GB_FULL;
394 case IXGBE_AUTOC_LMS_10G_SERIAL:
395 *speed = IXGBE_LINK_SPEED_10GB_FULL;
399 case IXGBE_AUTOC_LMS_KX4_KX_KR:
400 case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
401 *speed = IXGBE_LINK_SPEED_UNKNOWN;
402 if (autoc & IXGBE_AUTOC_KR_SUPP)
403 *speed |= IXGBE_LINK_SPEED_10GB_FULL;
404 if (autoc & IXGBE_AUTOC_KX4_SUPP)
405 *speed |= IXGBE_LINK_SPEED_10GB_FULL;
406 if (autoc & IXGBE_AUTOC_KX_SUPP)
407 *speed |= IXGBE_LINK_SPEED_1GB_FULL;
411 case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
412 *speed = IXGBE_LINK_SPEED_100_FULL;
413 if (autoc & IXGBE_AUTOC_KR_SUPP)
414 *speed |= IXGBE_LINK_SPEED_10GB_FULL;
415 if (autoc & IXGBE_AUTOC_KX4_SUPP)
416 *speed |= IXGBE_LINK_SPEED_10GB_FULL;
417 if (autoc & IXGBE_AUTOC_KX_SUPP)
418 *speed |= IXGBE_LINK_SPEED_1GB_FULL;
422 case IXGBE_AUTOC_LMS_SGMII_1G_100M:
423 *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
428 return IXGBE_ERR_LINK_SETUP;
431 if (hw->phy.multispeed_fiber) {
432 *speed |= IXGBE_LINK_SPEED_10GB_FULL |
433 IXGBE_LINK_SPEED_1GB_FULL;
435 /* QSFP must not enable auto-negotiation */
436 if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
446 * ixgbe_get_media_type_82599 - Get media type
447 * @hw: pointer to hardware structure
449 * Returns the media type (fiber, copper, backplane)
451 static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
453 /* Detect if there is a copper PHY attached. */
454 switch (hw->phy.type) {
455 case ixgbe_phy_cu_unknown:
457 return ixgbe_media_type_copper;
463 switch (hw->device_id) {
464 case IXGBE_DEV_ID_82599_KX4:
465 case IXGBE_DEV_ID_82599_KX4_MEZZ:
466 case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
467 case IXGBE_DEV_ID_82599_KR:
468 case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
469 case IXGBE_DEV_ID_82599_XAUI_LOM:
470 /* Default device ID is mezzanine card KX/KX4 */
471 return ixgbe_media_type_backplane;
473 case IXGBE_DEV_ID_82599_SFP:
474 case IXGBE_DEV_ID_82599_SFP_FCOE:
475 case IXGBE_DEV_ID_82599_SFP_EM:
476 case IXGBE_DEV_ID_82599_SFP_SF2:
477 case IXGBE_DEV_ID_82599_SFP_SF_QP:
478 case IXGBE_DEV_ID_82599EN_SFP:
479 return ixgbe_media_type_fiber;
481 case IXGBE_DEV_ID_82599_CX4:
482 return ixgbe_media_type_cx4;
484 case IXGBE_DEV_ID_82599_T3_LOM:
485 return ixgbe_media_type_copper;
487 case IXGBE_DEV_ID_82599_LS:
488 return ixgbe_media_type_fiber_lco;
490 case IXGBE_DEV_ID_82599_QSFP_SF_QP:
491 return ixgbe_media_type_fiber_qsfp;
494 return ixgbe_media_type_unknown;
499 * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3
500 * @hw: pointer to hardware structure
502 * Disables link, should be called during D3 power down sequence.
505 static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
507 u32 autoc2_reg, fwsm;
510 hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2);
512 /* Check to see if MNG FW could be enabled */
513 fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw));
515 if (((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT) &&
517 ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) {
518 autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
519 autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
520 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
525 * ixgbe_start_mac_link_82599 - Setup MAC link settings
526 * @hw: pointer to hardware structure
527 * @autoneg_wait_to_complete: true when waiting for completion is needed
529 * Configures link settings based on values in the ixgbe_hw struct.
530 * Restarts the link. Performs autonegotiation if needed.
532 static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
533 bool autoneg_wait_to_complete)
539 bool got_lock = false;
541 if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
542 status = hw->mac.ops.acquire_swfw_sync(hw,
543 IXGBE_GSSR_MAC_CSR_SM);
551 ixgbe_reset_pipeline_82599(hw);
554 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
556 /* Only poll for autoneg to complete if specified to do so */
557 if (autoneg_wait_to_complete) {
558 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
559 if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
560 IXGBE_AUTOC_LMS_KX4_KX_KR ||
561 (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
562 IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
563 (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
564 IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
565 links_reg = 0; /* Just in case Autoneg time = 0 */
566 for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
567 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
568 if (links_reg & IXGBE_LINKS_KX_AN_COMP)
572 if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
573 status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
574 hw_dbg(hw, "Autoneg did not complete.\n");
579 /* Add delay to filter out noises during initial link setup */
586 * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
587 * @hw: pointer to hardware structure
589 * The base drivers may require better control over SFP+ module
590 * PHY states. This includes selectively shutting down the Tx
591 * laser on the PHY, effectively halting physical link.
593 static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
595 u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
597 /* Blocked by MNG FW so bail */
598 if (ixgbe_check_reset_blocked(hw))
601 /* Disable tx laser; allow 100us to go dark per spec */
602 esdp_reg |= IXGBE_ESDP_SDP3;
603 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
604 IXGBE_WRITE_FLUSH(hw);
609 * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
610 * @hw: pointer to hardware structure
612 * The base drivers may require better control over SFP+ module
613 * PHY states. This includes selectively turning on the Tx
614 * laser on the PHY, effectively starting physical link.
616 static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
618 u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
620 /* Enable tx laser; allow 100ms to light up */
621 esdp_reg &= ~IXGBE_ESDP_SDP3;
622 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
623 IXGBE_WRITE_FLUSH(hw);
628 * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
629 * @hw: pointer to hardware structure
631 * When the driver changes the link speeds that it can support,
632 * it sets autotry_restart to true to indicate that we need to
633 * initiate a new autotry session with the link partner. To do
634 * so, we set the speed then disable and re-enable the tx laser, to
635 * alert the link partner that it also needs to restart autotry on its
636 * end. This is consistent with true clause 37 autoneg, which also
637 * involves a loss of signal.
639 static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
641 /* Blocked by MNG FW so bail */
642 if (ixgbe_check_reset_blocked(hw))
645 if (hw->mac.autotry_restart) {
646 ixgbe_disable_tx_laser_multispeed_fiber(hw);
647 ixgbe_enable_tx_laser_multispeed_fiber(hw);
648 hw->mac.autotry_restart = false;
653 * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
654 * @hw: pointer to hardware structure
655 * @speed: new link speed
656 * @autoneg_wait_to_complete: true when waiting for completion is needed
658 * Set the link speed in the AUTOC register and restarts link.
660 static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
661 ixgbe_link_speed speed,
662 bool autoneg_wait_to_complete)
665 ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
666 ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
668 u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
670 bool link_up = false;
671 bool autoneg = false;
673 /* Mask off requested but non-supported speeds */
674 status = hw->mac.ops.get_link_capabilities(hw, &link_speed,
682 * Try each speed one by one, highest priority first. We do this in
683 * software because 10gb fiber doesn't support speed autonegotiation.
685 if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
687 highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
689 /* If we already have link at this speed, just jump out */
690 status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
695 if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
698 /* Set the module link speed */
699 switch (hw->phy.media_type) {
700 case ixgbe_media_type_fiber:
701 esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
702 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
703 IXGBE_WRITE_FLUSH(hw);
705 case ixgbe_media_type_fiber_qsfp:
706 /* QSFP module automatically detects MAC link speed */
709 hw_dbg(hw, "Unexpected media type.\n");
713 /* Allow module to change analog characteristics (1G->10G) */
716 status = ixgbe_setup_mac_link_82599(hw,
717 IXGBE_LINK_SPEED_10GB_FULL,
718 autoneg_wait_to_complete);
722 /* Flap the tx laser if it has not already been done */
723 if (hw->mac.ops.flap_tx_laser)
724 hw->mac.ops.flap_tx_laser(hw);
727 * Wait for the controller to acquire link. Per IEEE 802.3ap,
728 * Section 73.10.2, we may have to wait up to 500ms if KR is
729 * attempted. 82599 uses the same timing for 10g SFI.
731 for (i = 0; i < 5; i++) {
732 /* Wait for the link partner to also set speed */
735 /* If we have link, just jump out */
736 status = hw->mac.ops.check_link(hw, &link_speed,
746 if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
748 if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
749 highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
751 /* If we already have link at this speed, just jump out */
752 status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
757 if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
760 /* Set the module link speed */
761 switch (hw->phy.media_type) {
762 case ixgbe_media_type_fiber:
763 esdp_reg &= ~IXGBE_ESDP_SDP5;
764 esdp_reg |= IXGBE_ESDP_SDP5_DIR;
765 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
766 IXGBE_WRITE_FLUSH(hw);
768 case ixgbe_media_type_fiber_qsfp:
769 /* QSFP module automatically detects MAC link speed */
772 hw_dbg(hw, "Unexpected media type.\n");
776 /* Allow module to change analog characteristics (10G->1G) */
779 status = ixgbe_setup_mac_link_82599(hw,
780 IXGBE_LINK_SPEED_1GB_FULL,
781 autoneg_wait_to_complete);
785 /* Flap the tx laser if it has not already been done */
786 if (hw->mac.ops.flap_tx_laser)
787 hw->mac.ops.flap_tx_laser(hw);
789 /* Wait for the link partner to also set speed */
792 /* If we have link, just jump out */
793 status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
803 * We didn't get link. Configure back to the highest speed we tried,
804 * (if there was more than one). We call ourselves back with just the
805 * single highest speed that the user requested.
808 status = ixgbe_setup_mac_link_multispeed_fiber(hw,
810 autoneg_wait_to_complete);
813 /* Set autoneg_advertised value based on input link speed */
814 hw->phy.autoneg_advertised = 0;
816 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
817 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
819 if (speed & IXGBE_LINK_SPEED_1GB_FULL)
820 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
826 * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
827 * @hw: pointer to hardware structure
828 * @speed: new link speed
829 * @autoneg_wait_to_complete: true when waiting for completion is needed
831 * Implements the Intel SmartSpeed algorithm.
833 static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
834 ixgbe_link_speed speed,
835 bool autoneg_wait_to_complete)
838 ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
840 bool link_up = false;
841 u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
843 /* Set autoneg_advertised value based on input link speed */
844 hw->phy.autoneg_advertised = 0;
846 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
847 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
849 if (speed & IXGBE_LINK_SPEED_1GB_FULL)
850 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
852 if (speed & IXGBE_LINK_SPEED_100_FULL)
853 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
856 * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the
857 * autoneg advertisement if link is unable to be established at the
858 * highest negotiated rate. This can sometimes happen due to integrity
859 * issues with the physical media connection.
862 /* First, try to get link with full advertisement */
863 hw->phy.smart_speed_active = false;
864 for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
865 status = ixgbe_setup_mac_link_82599(hw, speed,
866 autoneg_wait_to_complete);
871 * Wait for the controller to acquire link. Per IEEE 802.3ap,
872 * Section 73.10.2, we may have to wait up to 500ms if KR is
873 * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per
874 * Table 9 in the AN MAS.
876 for (i = 0; i < 5; i++) {
879 /* If we have link, just jump out */
880 status = hw->mac.ops.check_link(hw, &link_speed,
891 * We didn't get link. If we advertised KR plus one of KX4/KX
892 * (or BX4/BX), then disable KR and try again.
894 if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) ||
895 ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0))
898 /* Turn SmartSpeed on to disable KR support */
899 hw->phy.smart_speed_active = true;
900 status = ixgbe_setup_mac_link_82599(hw, speed,
901 autoneg_wait_to_complete);
906 * Wait for the controller to acquire link. 600ms will allow for
907 * the AN link_fail_inhibit_timer as well for multiple cycles of
908 * parallel detect, both 10g and 1g. This allows for the maximum
909 * connect attempts as defined in the AN MAS table 73-7.
911 for (i = 0; i < 6; i++) {
914 /* If we have link, just jump out */
915 status = hw->mac.ops.check_link(hw, &link_speed,
924 /* We didn't get link. Turn SmartSpeed back off. */
925 hw->phy.smart_speed_active = false;
926 status = ixgbe_setup_mac_link_82599(hw, speed,
927 autoneg_wait_to_complete);
930 if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
931 hw_dbg(hw, "Smartspeed has downgraded the link speed from the maximum advertised\n");
936 * ixgbe_setup_mac_link_82599 - Set MAC link speed
937 * @hw: pointer to hardware structure
938 * @speed: new link speed
939 * @autoneg_wait_to_complete: true when waiting for completion is needed
941 * Set the link speed in the AUTOC register and restarts link.
943 static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
944 ixgbe_link_speed speed,
945 bool autoneg_wait_to_complete)
947 bool autoneg = false;
949 u32 pma_pmd_1g, link_mode, links_reg, i;
950 u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
951 u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
952 ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
954 /* holds the value of AUTOC register at this current point in time */
955 u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
956 /* holds the cached value of AUTOC register */
958 /* temporary variable used for comparison purposes */
959 u32 autoc = current_autoc;
961 /* Check to see if speed passed in is supported. */
962 status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities,
967 speed &= link_capabilities;
969 if (speed == IXGBE_LINK_SPEED_UNKNOWN)
970 return IXGBE_ERR_LINK_SETUP;
972 /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
973 if (hw->mac.orig_link_settings_stored)
974 orig_autoc = hw->mac.orig_autoc;
978 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
979 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
981 if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
982 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
983 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
984 /* Set KX4/KX/KR support according to speed requested */
985 autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
986 if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
987 if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
988 autoc |= IXGBE_AUTOC_KX4_SUPP;
989 if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
990 (hw->phy.smart_speed_active == false))
991 autoc |= IXGBE_AUTOC_KR_SUPP;
993 if (speed & IXGBE_LINK_SPEED_1GB_FULL)
994 autoc |= IXGBE_AUTOC_KX_SUPP;
995 } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
996 (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
997 link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
998 /* Switch from 1G SFI to 10G SFI if requested */
999 if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
1000 (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
1001 autoc &= ~IXGBE_AUTOC_LMS_MASK;
1002 autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
1004 } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
1005 (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
1006 /* Switch from 10G SFI to 1G SFI if requested */
1007 if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
1008 (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
1009 autoc &= ~IXGBE_AUTOC_LMS_MASK;
1011 autoc |= IXGBE_AUTOC_LMS_1G_AN;
1013 autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
1017 if (autoc != current_autoc) {
1019 status = hw->mac.ops.prot_autoc_write(hw, autoc, false);
1023 /* Only poll for autoneg to complete if specified to do so */
1024 if (autoneg_wait_to_complete) {
1025 if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
1026 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
1027 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
1028 links_reg = 0; /*Just in case Autoneg time=0*/
1029 for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
1031 IXGBE_READ_REG(hw, IXGBE_LINKS);
1032 if (links_reg & IXGBE_LINKS_KX_AN_COMP)
1036 if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
1038 IXGBE_ERR_AUTONEG_NOT_COMPLETE;
1039 hw_dbg(hw, "Autoneg did not complete.\n");
1044 /* Add delay to filter out noises during initial link setup */
1052 * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
1053 * @hw: pointer to hardware structure
1054 * @speed: new link speed
1055 * @autoneg_wait_to_complete: true if waiting is needed to complete
1057 * Restarts link on PHY and MAC based on settings passed in.
1059 static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
1060 ixgbe_link_speed speed,
1061 bool autoneg_wait_to_complete)
1065 /* Setup the PHY according to input speed */
1066 status = hw->phy.ops.setup_link_speed(hw, speed,
1067 autoneg_wait_to_complete);
1069 ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
1075 * ixgbe_reset_hw_82599 - Perform hardware reset
1076 * @hw: pointer to hardware structure
1078 * Resets the hardware by resetting the transmit and receive units, masks
1079 * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
1082 static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
1084 ixgbe_link_speed link_speed;
1086 u32 ctrl, i, autoc, autoc2;
1088 bool link_up = false;
1090 /* Call adapter stop to disable tx/rx and clear interrupts */
1091 status = hw->mac.ops.stop_adapter(hw);
1095 /* flush pending Tx transactions */
1096 ixgbe_clear_tx_pending(hw);
1098 /* PHY ops must be identified and initialized prior to reset */
1100 /* Identify PHY and related function pointers */
1101 status = hw->phy.ops.init(hw);
1103 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
1106 /* Setup SFP module if there is one present. */
1107 if (hw->phy.sfp_setup_needed) {
1108 status = hw->mac.ops.setup_sfp(hw);
1109 hw->phy.sfp_setup_needed = false;
1112 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
1116 if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
1117 hw->phy.ops.reset(hw);
1119 /* remember AUTOC from before we reset */
1120 curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK;
1124 * Issue global reset to the MAC. Needs to be SW reset if link is up.
1125 * If link reset is used when link is up, it might reset the PHY when
1126 * mng is using it. If link is down or the flag to force full link
1127 * reset is set, then perform link reset.
1129 ctrl = IXGBE_CTRL_LNK_RST;
1130 if (!hw->force_full_reset) {
1131 hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
1133 ctrl = IXGBE_CTRL_RST;
1136 ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
1137 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
1138 IXGBE_WRITE_FLUSH(hw);
1140 /* Poll for reset bit to self-clear indicating reset is complete */
1141 for (i = 0; i < 10; i++) {
1143 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
1144 if (!(ctrl & IXGBE_CTRL_RST_MASK))
1148 if (ctrl & IXGBE_CTRL_RST_MASK) {
1149 status = IXGBE_ERR_RESET_FAILED;
1150 hw_dbg(hw, "Reset polling failed to complete.\n");
1156 * Double resets are required for recovery from certain error
1157 * conditions. Between resets, it is necessary to stall to allow time
1158 * for any pending HW events to complete.
1160 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
1161 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
1166 * Store the original AUTOC/AUTOC2 values if they have not been
1167 * stored off yet. Otherwise restore the stored original
1168 * values since the reset operation sets back to defaults.
1170 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
1171 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
1173 /* Enable link if disabled in NVM */
1174 if (autoc2 & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
1175 autoc2 &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
1176 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
1177 IXGBE_WRITE_FLUSH(hw);
1180 if (hw->mac.orig_link_settings_stored == false) {
1181 hw->mac.orig_autoc = autoc;
1182 hw->mac.orig_autoc2 = autoc2;
1183 hw->mac.orig_link_settings_stored = true;
1186 /* If MNG FW is running on a multi-speed device that
1187 * doesn't autoneg with out driver support we need to
1188 * leave LMS in the state it was before we MAC reset.
1189 * Likewise if we support WoL we don't want change the
1192 if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) ||
1194 hw->mac.orig_autoc =
1195 (hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
1198 if (autoc != hw->mac.orig_autoc) {
1199 status = hw->mac.ops.prot_autoc_write(hw,
1206 if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
1207 (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
1208 autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
1209 autoc2 |= (hw->mac.orig_autoc2 &
1210 IXGBE_AUTOC2_UPPER_MASK);
1211 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
1215 /* Store the permanent mac address */
1216 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
1219 * Store MAC address from RAR0, clear receive address registers, and
1220 * clear the multicast table. Also reset num_rar_entries to 128,
1221 * since we modify this value when programming the SAN MAC address.
1223 hw->mac.num_rar_entries = 128;
1224 hw->mac.ops.init_rx_addrs(hw);
1226 /* Store the permanent SAN mac address */
1227 hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
1229 /* Add the SAN MAC address to the RAR only if it's a valid address */
1230 if (is_valid_ether_addr(hw->mac.san_addr)) {
1231 hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
1232 hw->mac.san_addr, 0, IXGBE_RAH_AV);
1234 /* Save the SAN MAC RAR index */
1235 hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
1237 /* Reserve the last RAR for the SAN MAC address */
1238 hw->mac.num_rar_entries--;
1241 /* Store the alternative WWNN/WWPN prefix */
1242 hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
1243 &hw->mac.wwpn_prefix);
1249 * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
1250 * @hw: pointer to hardware structure
1252 s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
1255 u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
1257 fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
1260 * Before starting reinitialization process,
1261 * FDIRCMD.CMD must be zero.
1263 for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
1264 if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
1265 IXGBE_FDIRCMD_CMD_MASK))
1269 if (i >= IXGBE_FDIRCMD_CMD_POLL) {
1270 hw_dbg(hw, "Flow Director previous command isn't complete, aborting table re-initialization.\n");
1271 return IXGBE_ERR_FDIR_REINIT_FAILED;
1274 IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
1275 IXGBE_WRITE_FLUSH(hw);
1277 * 82599 adapters flow director init flow cannot be restarted,
1278 * Workaround 82599 silicon errata by performing the following steps
1279 * before re-writing the FDIRCTRL control register with the same value.
1280 * - write 1 to bit 8 of FDIRCMD register &
1281 * - write 0 to bit 8 of FDIRCMD register
1283 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
1284 (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
1285 IXGBE_FDIRCMD_CLEARHT));
1286 IXGBE_WRITE_FLUSH(hw);
1287 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
1288 (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
1289 ~IXGBE_FDIRCMD_CLEARHT));
1290 IXGBE_WRITE_FLUSH(hw);
1292 * Clear FDIR Hash register to clear any leftover hashes
1293 * waiting to be programmed.
1295 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00);
1296 IXGBE_WRITE_FLUSH(hw);
1298 IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
1299 IXGBE_WRITE_FLUSH(hw);
1301 /* Poll init-done after we write FDIRCTRL register */
1302 for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
1303 if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
1304 IXGBE_FDIRCTRL_INIT_DONE)
1306 usleep_range(1000, 2000);
1308 if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
1309 hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
1310 return IXGBE_ERR_FDIR_REINIT_FAILED;
1313 /* Clear FDIR statistics registers (read to clear) */
1314 IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
1315 IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
1316 IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
1317 IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
1318 IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
1324 * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
1325 * @hw: pointer to hardware structure
1326 * @fdirctrl: value to write to flow director control register
1328 static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
1332 /* Prime the keys for hashing */
1333 IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
1334 IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
1337 * Poll init-done after we write the register. Estimated times:
1338 * 10G: PBALLOC = 11b, timing is 60us
1339 * 1G: PBALLOC = 11b, timing is 600us
1340 * 100M: PBALLOC = 11b, timing is 6ms
1342 * Multiple these timings by 4 if under full Rx load
1344 * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
1345 * 1 msec per poll time. If we're at line rate and drop to 100M, then
1346 * this might not finish in our poll time, but we can live with that
1349 IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
1350 IXGBE_WRITE_FLUSH(hw);
1351 for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
1352 if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
1353 IXGBE_FDIRCTRL_INIT_DONE)
1355 usleep_range(1000, 2000);
1358 if (i >= IXGBE_FDIR_INIT_DONE_POLL)
1359 hw_dbg(hw, "Flow Director poll time exceeded!\n");
1363 * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
1364 * @hw: pointer to hardware structure
1365 * @fdirctrl: value to write to flow director control register, initially
1366 * contains just the value of the Rx packet buffer allocation
1368 s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
1371 * Continue setup of fdirctrl register bits:
1372 * Move the flexible bytes to use the ethertype - shift 6 words
1373 * Set the maximum length per hash bucket to 0xA filters
1374 * Send interrupt when 64 filters are left
1376 fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
1377 (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
1378 (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
1380 /* write hashes and fdirctrl register, poll for completion */
1381 ixgbe_fdir_enable_82599(hw, fdirctrl);
1387 * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
1388 * @hw: pointer to hardware structure
1389 * @fdirctrl: value to write to flow director control register, initially
1390 * contains just the value of the Rx packet buffer allocation
1392 s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
1395 * Continue setup of fdirctrl register bits:
1396 * Turn perfect match filtering on
1397 * Initialize the drop queue
1398 * Move the flexible bytes to use the ethertype - shift 6 words
1399 * Set the maximum length per hash bucket to 0xA filters
1400 * Send interrupt when 64 (0x4 * 16) filters are left
1402 fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH |
1403 (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) |
1404 (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
1405 (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
1406 (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
1408 /* write hashes and fdirctrl register, poll for completion */
1409 ixgbe_fdir_enable_82599(hw, fdirctrl);
1415 * These defines allow us to quickly generate all of the necessary instructions
1416 * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
1417 * for values 0 through 15
1419 #define IXGBE_ATR_COMMON_HASH_KEY \
1420 (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
1421 #define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
1424 if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
1425 common_hash ^= lo_hash_dword >> n; \
1426 else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
1427 bucket_hash ^= lo_hash_dword >> n; \
1428 else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
1429 sig_hash ^= lo_hash_dword << (16 - n); \
1430 if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
1431 common_hash ^= hi_hash_dword >> n; \
1432 else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
1433 bucket_hash ^= hi_hash_dword >> n; \
1434 else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
1435 sig_hash ^= hi_hash_dword << (16 - n); \
1439 * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
1440 * @stream: input bitstream to compute the hash on
1442 * This function is almost identical to the function above but contains
1443 * several optomizations such as unwinding all of the loops, letting the
1444 * compiler work out all of the conditional ifs since the keys are static
1445 * defines, and computing two keys at once since the hashed dword stream
1446 * will be the same for both keys.
1448 static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
1449 union ixgbe_atr_hash_dword common)
1451 u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
1452 u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
1454 /* record the flow_vm_vlan bits as they are a key part to the hash */
1455 flow_vm_vlan = ntohl(input.dword);
1457 /* generate common hash dword */
1458 hi_hash_dword = ntohl(common.dword);
1460 /* low dword is word swapped version of common */
1461 lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
1463 /* apply flow ID/VM pool/VLAN ID bits to hash words */
1464 hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
1466 /* Process bits 0 and 16 */
1467 IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
1470 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
1471 * delay this because bit 0 of the stream should not be processed
1472 * so we do not add the vlan until after bit 0 was processed
1474 lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
1476 /* Process remaining 30 bit of the key */
1477 IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
1478 IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
1479 IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
1480 IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
1481 IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
1482 IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
1483 IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
1484 IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
1485 IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
1486 IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
1487 IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
1488 IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
1489 IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
1490 IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
1491 IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
1493 /* combine common_hash result with signature and bucket hashes */
1494 bucket_hash ^= common_hash;
1495 bucket_hash &= IXGBE_ATR_HASH_MASK;
1497 sig_hash ^= common_hash << 16;
1498 sig_hash &= IXGBE_ATR_HASH_MASK << 16;
1500 /* return completed signature hash */
1501 return sig_hash ^ bucket_hash;
1505 * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
1506 * @hw: pointer to hardware structure
1507 * @input: unique input dword
1508 * @common: compressed common input dword
1509 * @queue: queue index to direct traffic to
1511 s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
1512 union ixgbe_atr_hash_dword input,
1513 union ixgbe_atr_hash_dword common,
1520 * Get the flow_type in order to program FDIRCMD properly
1521 * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
1523 switch (input.formatted.flow_type) {
1524 case IXGBE_ATR_FLOW_TYPE_TCPV4:
1525 case IXGBE_ATR_FLOW_TYPE_UDPV4:
1526 case IXGBE_ATR_FLOW_TYPE_SCTPV4:
1527 case IXGBE_ATR_FLOW_TYPE_TCPV6:
1528 case IXGBE_ATR_FLOW_TYPE_UDPV6:
1529 case IXGBE_ATR_FLOW_TYPE_SCTPV6:
1532 hw_dbg(hw, " Error on flow type input\n");
1533 return IXGBE_ERR_CONFIG;
1536 /* configure FDIRCMD register */
1537 fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
1538 IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
1539 fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
1540 fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
1543 * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
1544 * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH.
1546 fdirhashcmd = (u64)fdircmd << 32;
1547 fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
1548 IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
1550 hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
1555 #define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \
1558 if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
1559 bucket_hash ^= lo_hash_dword >> n; \
1560 if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
1561 bucket_hash ^= hi_hash_dword >> n; \
1565 * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
1566 * @atr_input: input bitstream to compute the hash on
1567 * @input_mask: mask for the input bitstream
1569 * This function serves two main purposes. First it applys the input_mask
1570 * to the atr_input resulting in a cleaned up atr_input data stream.
1571 * Secondly it computes the hash and stores it in the bkt_hash field at
1572 * the end of the input byte stream. This way it will be available for
1573 * future use without needing to recompute the hash.
1575 void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
1576 union ixgbe_atr_input *input_mask)
1579 u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
1580 u32 bucket_hash = 0, hi_dword = 0;
1583 /* Apply masks to input data */
1584 for (i = 0; i <= 10; i++)
1585 input->dword_stream[i] &= input_mask->dword_stream[i];
1587 /* record the flow_vm_vlan bits as they are a key part to the hash */
1588 flow_vm_vlan = ntohl(input->dword_stream[0]);
1590 /* generate common hash dword */
1591 for (i = 1; i <= 10; i++)
1592 hi_dword ^= input->dword_stream[i];
1593 hi_hash_dword = ntohl(hi_dword);
1595 /* low dword is word swapped version of common */
1596 lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
1598 /* apply flow ID/VM pool/VLAN ID bits to hash words */
1599 hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
1601 /* Process bits 0 and 16 */
1602 IXGBE_COMPUTE_BKT_HASH_ITERATION(0);
1605 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
1606 * delay this because bit 0 of the stream should not be processed
1607 * so we do not add the vlan until after bit 0 was processed
1609 lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
1611 /* Process remaining 30 bit of the key */
1612 for (i = 1; i <= 15; i++)
1613 IXGBE_COMPUTE_BKT_HASH_ITERATION(i);
1616 * Limit hash to 13 bits since max bucket count is 8K.
1617 * Store result at the end of the input stream.
1619 input->formatted.bkt_hash = bucket_hash & 0x1FFF;
1623 * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
1624 * @input_mask: mask to be bit swapped
1626 * The source and destination port masks for flow director are bit swapped
1627 * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to
1628 * generate a correctly swapped value we need to bit swap the mask and that
1629 * is what is accomplished by this function.
1631 static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
1633 u32 mask = ntohs(input_mask->formatted.dst_port);
1635 mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
1636 mask |= ntohs(input_mask->formatted.src_port);
1637 mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
1638 mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
1639 mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
1640 return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
1644 * These two macros are meant to address the fact that we have registers
1645 * that are either all or in part big-endian. As a result on big-endian
1646 * systems we will end up byte swapping the value to little-endian before
1647 * it is byte swapped again and written to the hardware in the original
1648 * big-endian format.
1650 #define IXGBE_STORE_AS_BE32(_value) \
1651 (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
1652 (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
1654 #define IXGBE_WRITE_REG_BE32(a, reg, value) \
1655 IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))
1657 #define IXGBE_STORE_AS_BE16(_value) \
1658 ntohs(((u16)(_value) >> 8) | ((u16)(_value) << 8))
1660 s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
1661 union ixgbe_atr_input *input_mask)
1663 /* mask IPv6 since it is currently not supported */
1664 u32 fdirm = IXGBE_FDIRM_DIPv6;
1668 * Program the relevant mask registers. If src/dst_port or src/dst_addr
1669 * are zero, then assume a full mask for that field. Also assume that
1670 * a VLAN of 0 is unspecified, so mask that out as well. L4type
1671 * cannot be masked out in this implementation.
1673 * This also assumes IPv4 only. IPv6 masking isn't supported at this
1677 /* verify bucket hash is cleared on hash generation */
1678 if (input_mask->formatted.bkt_hash)
1679 hw_dbg(hw, " bucket hash should always be 0 in mask\n");
1681 /* Program FDIRM and verify partial masks */
1682 switch (input_mask->formatted.vm_pool & 0x7F) {
1684 fdirm |= IXGBE_FDIRM_POOL;
1688 hw_dbg(hw, " Error on vm pool mask\n");
1689 return IXGBE_ERR_CONFIG;
1692 switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) {
1694 fdirm |= IXGBE_FDIRM_L4P;
1695 if (input_mask->formatted.dst_port ||
1696 input_mask->formatted.src_port) {
1697 hw_dbg(hw, " Error on src/dst port mask\n");
1698 return IXGBE_ERR_CONFIG;
1700 case IXGBE_ATR_L4TYPE_MASK:
1703 hw_dbg(hw, " Error on flow type mask\n");
1704 return IXGBE_ERR_CONFIG;
1707 switch (ntohs(input_mask->formatted.vlan_id) & 0xEFFF) {
1709 /* mask VLAN ID, fall through to mask VLAN priority */
1710 fdirm |= IXGBE_FDIRM_VLANID;
1712 /* mask VLAN priority */
1713 fdirm |= IXGBE_FDIRM_VLANP;
1716 /* mask VLAN ID only, fall through */
1717 fdirm |= IXGBE_FDIRM_VLANID;
1719 /* no VLAN fields masked */
1722 hw_dbg(hw, " Error on VLAN mask\n");
1723 return IXGBE_ERR_CONFIG;
1726 switch (input_mask->formatted.flex_bytes & 0xFFFF) {
1728 /* Mask Flex Bytes, fall through */
1729 fdirm |= IXGBE_FDIRM_FLEX;
1733 hw_dbg(hw, " Error on flexible byte mask\n");
1734 return IXGBE_ERR_CONFIG;
1737 /* Now mask VM pool and destination IPv6 - bits 5 and 2 */
1738 IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
1740 /* store the TCP/UDP port masks, bit reversed from port layout */
1741 fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask);
1743 /* write both the same so that UDP and TCP use the same mask */
1744 IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
1745 IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
1747 /* store source and destination IP masks (big-enian) */
1748 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
1749 ~input_mask->formatted.src_ip[0]);
1750 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
1751 ~input_mask->formatted.dst_ip[0]);
1756 s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
1757 union ixgbe_atr_input *input,
1758 u16 soft_id, u8 queue)
1760 u32 fdirport, fdirvlan, fdirhash, fdircmd;
1762 /* currently IPv6 is not supported, must be programmed with 0 */
1763 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0),
1764 input->formatted.src_ip[0]);
1765 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1),
1766 input->formatted.src_ip[1]);
1767 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2),
1768 input->formatted.src_ip[2]);
1770 /* record the source address (big-endian) */
1771 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
1773 /* record the first 32 bits of the destination address (big-endian) */
1774 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
1776 /* record source and destination port (little-endian)*/
1777 fdirport = ntohs(input->formatted.dst_port);
1778 fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
1779 fdirport |= ntohs(input->formatted.src_port);
1780 IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
1782 /* record vlan (little-endian) and flex_bytes(big-endian) */
1783 fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
1784 fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
1785 fdirvlan |= ntohs(input->formatted.vlan_id);
1786 IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
1788 /* configure FDIRHASH register */
1789 fdirhash = input->formatted.bkt_hash;
1790 fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
1791 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
1794 * flush all previous writes to make certain registers are
1795 * programmed prior to issuing the command
1797 IXGBE_WRITE_FLUSH(hw);
1799 /* configure FDIRCMD register */
1800 fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
1801 IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
1802 if (queue == IXGBE_FDIR_DROP_QUEUE)
1803 fdircmd |= IXGBE_FDIRCMD_DROP;
1804 fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
1805 fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
1806 fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
1808 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
1813 s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
1814 union ixgbe_atr_input *input,
1822 /* configure FDIRHASH register */
1823 fdirhash = input->formatted.bkt_hash;
1824 fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
1825 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
1827 /* flush hash to HW */
1828 IXGBE_WRITE_FLUSH(hw);
1830 /* Query if filter is present */
1831 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
1833 for (retry_count = 10; retry_count; retry_count--) {
1834 /* allow 10us for query to process */
1836 /* verify query completed successfully */
1837 fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
1838 if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK))
1843 err = IXGBE_ERR_FDIR_REINIT_FAILED;
1845 /* if filter exists in hardware then remove it */
1846 if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
1847 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
1848 IXGBE_WRITE_FLUSH(hw);
1849 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
1850 IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
1857 * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
1858 * @hw: pointer to hardware structure
1859 * @reg: analog register to read
1862 * Performs read operation to Omer analog register specified.
1864 static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
1868 IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD |
1870 IXGBE_WRITE_FLUSH(hw);
1872 core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL);
1873 *val = (u8)core_ctl;
1879 * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
1880 * @hw: pointer to hardware structure
1881 * @reg: atlas register to write
1882 * @val: value to write
1884 * Performs write operation to Omer analog register specified.
1886 static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
1890 core_ctl = (reg << 8) | val;
1891 IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl);
1892 IXGBE_WRITE_FLUSH(hw);
1899 * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
1900 * @hw: pointer to hardware structure
1902 * Starts the hardware using the generic start_hw function
1903 * and the generation start_hw function.
1904 * Then performs revision-specific operations, if any.
1906 static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
1910 ret_val = ixgbe_start_hw_generic(hw);
1914 ret_val = ixgbe_start_hw_gen2(hw);
1918 /* We need to run link autotry after the driver loads */
1919 hw->mac.autotry_restart = true;
1924 return ixgbe_verify_fw_version_82599(hw);
1928 * ixgbe_identify_phy_82599 - Get physical layer module
1929 * @hw: pointer to hardware structure
1931 * Determines the physical layer module found on the current adapter.
1932 * If PHY already detected, maintains current PHY type in hw struct,
1933 * otherwise executes the PHY detection routine.
1935 static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
1939 /* Detect PHY if not unknown - returns success if already detected. */
1940 status = ixgbe_identify_phy_generic(hw);
1942 /* 82599 10GBASE-T requires an external PHY */
1943 if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
1945 status = ixgbe_identify_module_generic(hw);
1948 /* Set PHY type none if no PHY detected */
1949 if (hw->phy.type == ixgbe_phy_unknown) {
1950 hw->phy.type = ixgbe_phy_none;
1954 /* Return error if SFP module has been detected but is not supported */
1955 if (hw->phy.type == ixgbe_phy_sfp_unsupported)
1956 return IXGBE_ERR_SFP_NOT_SUPPORTED;
1962 * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
1963 * @hw: pointer to hardware structure
1964 * @regval: register value to write to RXCTRL
1966 * Enables the Rx DMA unit for 82599
1968 static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
1971 * Workaround for 82599 silicon errata when enabling the Rx datapath.
1972 * If traffic is incoming before we enable the Rx unit, it could hang
1973 * the Rx DMA unit. Therefore, make sure the security engine is
1974 * completely disabled prior to enabling the Rx unit.
1976 hw->mac.ops.disable_rx_buff(hw);
1978 if (regval & IXGBE_RXCTRL_RXEN)
1979 hw->mac.ops.enable_rx(hw);
1981 hw->mac.ops.disable_rx(hw);
1983 hw->mac.ops.enable_rx_buff(hw);
1989 * ixgbe_verify_fw_version_82599 - verify fw version for 82599
1990 * @hw: pointer to hardware structure
1992 * Verifies that installed the firmware version is 0.6 or higher
1993 * for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
1995 * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
1996 * if the FW version is not supported.
1998 static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
2000 s32 status = IXGBE_ERR_EEPROM_VERSION;
2001 u16 fw_offset, fw_ptp_cfg_offset;
2005 /* firmware check is only necessary for SFI devices */
2006 if (hw->phy.media_type != ixgbe_media_type_fiber)
2009 /* get the offset to the Firmware Module block */
2010 offset = IXGBE_FW_PTR;
2011 if (hw->eeprom.ops.read(hw, offset, &fw_offset))
2012 goto fw_version_err;
2014 if (fw_offset == 0 || fw_offset == 0xFFFF)
2015 return IXGBE_ERR_EEPROM_VERSION;
2017 /* get the offset to the Pass Through Patch Configuration block */
2018 offset = fw_offset + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR;
2019 if (hw->eeprom.ops.read(hw, offset, &fw_ptp_cfg_offset))
2020 goto fw_version_err;
2022 if (fw_ptp_cfg_offset == 0 || fw_ptp_cfg_offset == 0xFFFF)
2023 return IXGBE_ERR_EEPROM_VERSION;
2025 /* get the firmware version */
2026 offset = fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4;
2027 if (hw->eeprom.ops.read(hw, offset, &fw_version))
2028 goto fw_version_err;
2030 if (fw_version > 0x5)
2036 hw_err(hw, "eeprom read at offset %d failed\n", offset);
2037 return IXGBE_ERR_EEPROM_VERSION;
2041 * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
2042 * @hw: pointer to hardware structure
2044 * Returns true if the LESM FW module is present and enabled. Otherwise
2045 * returns false. Smart Speed must be disabled if LESM FW module is enabled.
2047 static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
2049 u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
2052 /* get the offset to the Firmware Module block */
2053 status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
2055 if (status || fw_offset == 0 || fw_offset == 0xFFFF)
2058 /* get the offset to the LESM Parameters block */
2059 status = hw->eeprom.ops.read(hw, (fw_offset +
2060 IXGBE_FW_LESM_PARAMETERS_PTR),
2061 &fw_lesm_param_offset);
2064 fw_lesm_param_offset == 0 || fw_lesm_param_offset == 0xFFFF)
2067 /* get the lesm state word */
2068 status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
2069 IXGBE_FW_LESM_STATE_1),
2072 if (!status && (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
2079 * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
2080 * fastest available method
2082 * @hw: pointer to hardware structure
2083 * @offset: offset of word in EEPROM to read
2084 * @words: number of words
2085 * @data: word(s) read from the EEPROM
2087 * Retrieves 16 bit word(s) read from EEPROM
2089 static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
2090 u16 words, u16 *data)
2092 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
2094 /* If EEPROM is detected and can be addressed using 14 bits,
2095 * use EERD otherwise use bit bang
2097 if (eeprom->type == ixgbe_eeprom_spi &&
2098 offset + (words - 1) <= IXGBE_EERD_MAX_ADDR)
2099 return ixgbe_read_eerd_buffer_generic(hw, offset, words, data);
2101 return ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, words,
2106 * ixgbe_read_eeprom_82599 - Read EEPROM word using
2107 * fastest available method
2109 * @hw: pointer to hardware structure
2110 * @offset: offset of word in the EEPROM to read
2111 * @data: word read from the EEPROM
2113 * Reads a 16 bit word from the EEPROM
2115 static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
2116 u16 offset, u16 *data)
2118 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
2121 * If EEPROM is detected and can be addressed using 14 bits,
2122 * use EERD otherwise use bit bang
2124 if (eeprom->type == ixgbe_eeprom_spi && offset <= IXGBE_EERD_MAX_ADDR)
2125 return ixgbe_read_eerd_generic(hw, offset, data);
2127 return ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
2131 * ixgbe_reset_pipeline_82599 - perform pipeline reset
2133 * @hw: pointer to hardware structure
2135 * Reset pipeline by asserting Restart_AN together with LMS change to ensure
2136 * full pipeline reset. Note - We must hold the SW/FW semaphore before writing
2137 * to AUTOC, so this function assumes the semaphore is held.
2139 static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
2143 u32 i, autoc_reg, autoc2_reg;
2145 /* Enable link if disabled in NVM */
2146 autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
2147 if (autoc2_reg & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
2148 autoc2_reg &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
2149 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
2150 IXGBE_WRITE_FLUSH(hw);
2153 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
2154 autoc_reg |= IXGBE_AUTOC_AN_RESTART;
2156 /* Write AUTOC register with toggled LMS[2] bit and Restart_AN */
2157 IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
2158 autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT));
2160 /* Wait for AN to leave state 0 */
2161 for (i = 0; i < 10; i++) {
2162 usleep_range(4000, 8000);
2163 anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
2164 if (anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)
2168 if (!(anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)) {
2169 hw_dbg(hw, "auto negotiation not completed\n");
2170 ret_val = IXGBE_ERR_RESET_FAILED;
2171 goto reset_pipeline_out;
2177 /* Write AUTOC register with original LMS field and Restart_AN */
2178 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
2179 IXGBE_WRITE_FLUSH(hw);
2185 * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
2186 * @hw: pointer to hardware structure
2187 * @byte_offset: byte offset to read
2190 * Performs byte read operation to SFP module's EEPROM over I2C interface at
2191 * a specified device address.
2193 static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
2194 u8 dev_addr, u8 *data)
2200 if (hw->phy.qsfp_shared_i2c_bus == true) {
2201 /* Acquire I2C bus ownership. */
2202 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2203 esdp |= IXGBE_ESDP_SDP0;
2204 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
2205 IXGBE_WRITE_FLUSH(hw);
2208 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2209 if (esdp & IXGBE_ESDP_SDP1)
2212 usleep_range(5000, 10000);
2217 hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
2218 status = IXGBE_ERR_I2C;
2219 goto release_i2c_access;
2223 status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data);
2226 if (hw->phy.qsfp_shared_i2c_bus == true) {
2227 /* Release I2C bus ownership. */
2228 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2229 esdp &= ~IXGBE_ESDP_SDP0;
2230 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
2231 IXGBE_WRITE_FLUSH(hw);
2238 * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
2239 * @hw: pointer to hardware structure
2240 * @byte_offset: byte offset to write
2241 * @data: value to write
2243 * Performs byte write operation to SFP module's EEPROM over I2C interface at
2244 * a specified device address.
2246 static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
2247 u8 dev_addr, u8 data)
2253 if (hw->phy.qsfp_shared_i2c_bus == true) {
2254 /* Acquire I2C bus ownership. */
2255 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2256 esdp |= IXGBE_ESDP_SDP0;
2257 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
2258 IXGBE_WRITE_FLUSH(hw);
2261 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2262 if (esdp & IXGBE_ESDP_SDP1)
2265 usleep_range(5000, 10000);
2270 hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
2271 status = IXGBE_ERR_I2C;
2272 goto release_i2c_access;
2276 status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data);
2279 if (hw->phy.qsfp_shared_i2c_bus == true) {
2280 /* Release I2C bus ownership. */
2281 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2282 esdp &= ~IXGBE_ESDP_SDP0;
2283 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
2284 IXGBE_WRITE_FLUSH(hw);
2290 static struct ixgbe_mac_operations mac_ops_82599 = {
2291 .init_hw = &ixgbe_init_hw_generic,
2292 .reset_hw = &ixgbe_reset_hw_82599,
2293 .start_hw = &ixgbe_start_hw_82599,
2294 .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
2295 .get_media_type = &ixgbe_get_media_type_82599,
2296 .enable_rx_dma = &ixgbe_enable_rx_dma_82599,
2297 .disable_rx_buff = &ixgbe_disable_rx_buff_generic,
2298 .enable_rx_buff = &ixgbe_enable_rx_buff_generic,
2299 .get_mac_addr = &ixgbe_get_mac_addr_generic,
2300 .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
2301 .get_device_caps = &ixgbe_get_device_caps_generic,
2302 .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
2303 .stop_adapter = &ixgbe_stop_adapter_generic,
2304 .get_bus_info = &ixgbe_get_bus_info_generic,
2305 .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie,
2306 .read_analog_reg8 = &ixgbe_read_analog_reg8_82599,
2307 .write_analog_reg8 = &ixgbe_write_analog_reg8_82599,
2308 .stop_link_on_d3 = &ixgbe_stop_mac_link_on_d3_82599,
2309 .setup_link = &ixgbe_setup_mac_link_82599,
2310 .set_rxpba = &ixgbe_set_rxpba_generic,
2311 .check_link = &ixgbe_check_mac_link_generic,
2312 .get_link_capabilities = &ixgbe_get_link_capabilities_82599,
2313 .led_on = &ixgbe_led_on_generic,
2314 .led_off = &ixgbe_led_off_generic,
2315 .blink_led_start = &ixgbe_blink_led_start_generic,
2316 .blink_led_stop = &ixgbe_blink_led_stop_generic,
2317 .set_rar = &ixgbe_set_rar_generic,
2318 .clear_rar = &ixgbe_clear_rar_generic,
2319 .set_vmdq = &ixgbe_set_vmdq_generic,
2320 .set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic,
2321 .clear_vmdq = &ixgbe_clear_vmdq_generic,
2322 .init_rx_addrs = &ixgbe_init_rx_addrs_generic,
2323 .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
2324 .enable_mc = &ixgbe_enable_mc_generic,
2325 .disable_mc = &ixgbe_disable_mc_generic,
2326 .clear_vfta = &ixgbe_clear_vfta_generic,
2327 .set_vfta = &ixgbe_set_vfta_generic,
2328 .fc_enable = &ixgbe_fc_enable_generic,
2329 .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic,
2330 .init_uta_tables = &ixgbe_init_uta_tables_generic,
2331 .setup_sfp = &ixgbe_setup_sfp_modules_82599,
2332 .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing,
2333 .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
2334 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync,
2335 .release_swfw_sync = &ixgbe_release_swfw_sync,
2336 .get_thermal_sensor_data = &ixgbe_get_thermal_sensor_data_generic,
2337 .init_thermal_sensor_thresh = &ixgbe_init_thermal_sensor_thresh_generic,
2338 .prot_autoc_read = &prot_autoc_read_82599,
2339 .prot_autoc_write = &prot_autoc_write_82599,
2340 .enable_rx = &ixgbe_enable_rx_generic,
2341 .disable_rx = &ixgbe_disable_rx_generic,
2344 static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
2345 .init_params = &ixgbe_init_eeprom_params_generic,
2346 .read = &ixgbe_read_eeprom_82599,
2347 .read_buffer = &ixgbe_read_eeprom_buffer_82599,
2348 .write = &ixgbe_write_eeprom_generic,
2349 .write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic,
2350 .calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
2351 .validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
2352 .update_checksum = &ixgbe_update_eeprom_checksum_generic,
2355 static struct ixgbe_phy_operations phy_ops_82599 = {
2356 .identify = &ixgbe_identify_phy_82599,
2357 .identify_sfp = &ixgbe_identify_module_generic,
2358 .init = &ixgbe_init_phy_ops_82599,
2359 .reset = &ixgbe_reset_phy_generic,
2360 .read_reg = &ixgbe_read_phy_reg_generic,
2361 .write_reg = &ixgbe_write_phy_reg_generic,
2362 .setup_link = &ixgbe_setup_phy_link_generic,
2363 .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
2364 .read_i2c_byte = &ixgbe_read_i2c_byte_generic,
2365 .write_i2c_byte = &ixgbe_write_i2c_byte_generic,
2366 .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic,
2367 .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic,
2368 .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic,
2369 .check_overtemp = &ixgbe_tn_check_overtemp,
2372 struct ixgbe_info ixgbe_82599_info = {
2373 .mac = ixgbe_mac_82599EB,
2374 .get_invariants = &ixgbe_get_invariants_82599,
2375 .mac_ops = &mac_ops_82599,
2376 .eeprom_ops = &eeprom_ops_82599,
2377 .phy_ops = &phy_ops_82599,
2378 .mbx_ops = &mbx_ops_generic,
2379 .mvals = ixgbe_mvals_8259X,