2 # 8390 device configuration
6 bool "National Semi-conductor 8390 devices"
8 depends on NET_VENDOR_NATSEMI
10 If you have a network (Ethernet) card belonging to this class, say Y
11 and read the Ethernet-HOWTO, available from
12 <http://www.tldp.org/docs.html#howto>.
14 Note that the answer to this question doesn't directly affect the
15 kernel: saying N will just cause the configurator to skip all
16 the questions about Western Digital cards. If you say Y, you will be
17 asked for your specific card in the following questions.
22 tristate "Asix AX88190 PCMCIA support"
25 Say Y here if you intend to attach an Asix AX88190-based PCMCIA
26 (PC-card) Fast Ethernet card to your computer. These cards are
27 nearly NE2000 compatible but need a separate driver due to a few
30 To compile this driver as a module, choose M here: the module will be
31 called axnet_cs. If unsure, say N.
34 tristate "ASIX AX88796 NE2000 clone support"
35 depends on (ARM || MIPS || SUPERH)
40 AX88796 driver, using platform bus to provide
41 chip detection and resources
44 bool "ASIX AX88796 external 93CX6 eeprom support"
48 Select this if your platform comes with an external 93CX6 eeprom.
51 tristate "Hydra support"
55 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
57 To compile this driver as a module, choose M here: the module
61 tristate "I-cubed EtherH/ANT EtherM support"
62 depends on ARM && ARCH_ACORN
65 If you have an Acorn system with one of these network cards, you
66 should say Y to this option if you wish to use it with Linux.
69 bool "Macintosh NS 8390 based ethernet cards"
73 If you want to include a driver to support Nubus or LC-PDS
74 Ethernet cards using an NS8390 chipset or its equivalent, say Y
75 and read the Ethernet-HOWTO, available from
76 <http://www.tldp.org/docs.html#howto>.
79 tristate "ColdFire NS8390 based Ethernet support"
83 This driver is for Ethernet devices using an NS8390-compatible
84 chipset on many common ColdFire CPU based boards. Many of the older
85 Freescale dev boards use this, and some other common boards like
86 some SnapGear routers do as well.
88 If you have one of these boards and want to use the network interface
89 on them then choose Y. To compile this driver as a module, choose M
90 here, the module will be called mcf8390.
93 tristate "NE2000/NE1000 support"
94 depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \
98 If you have a network (Ethernet) card of this type, say Y and read
99 the Ethernet-HOWTO, available from
100 <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
101 without a specific driver are compatible with NE2000.
103 If you have a PCI NE2000 card however, say N here and Y to "PCI
104 NE2000 and clone support" below.
106 To compile this driver as a module, choose M here. The module
110 tristate "PCI NE2000 and clones support (see help)"
114 This driver is for NE2000 compatible PCI cards. It will not work
115 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
116 support" below). If you have a PCI NE2000 network (Ethernet) card,
117 say Y and read the Ethernet-HOWTO, available from
118 <http://www.tldp.org/docs.html#howto>.
120 This driver also works for the following NE2000 clone cards:
121 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
122 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
123 Holtek HT80232 Holtek HT80229
125 To compile this driver as a module, choose M here. The module
126 will be called ne2k-pci.
129 tristate "PCMCIA NE2000 support"
130 depends on AMIGA_PCMCIA
133 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
136 To compile this driver as a module, choose M here: the module
140 tristate "NE2000 compatible PCMCIA support"
144 Say Y here if you intend to attach an NE2000 compatible PCMCIA
145 (PC-card) Ethernet or Fast Ethernet card to your computer.
147 To compile this driver as a module, choose M here: the module will be
148 called pcnet_cs. If unsure, say N.
151 tristate "National DP83902AV support"
155 Support for cards based on the National Semiconductor DP83902AV
156 ST-NIC Serial Network Interface Controller for Twisted Pair. This
157 is a 10Mbit/sec Ethernet controller. Product overview and specs at
158 <http://www.national.com/pf/DP/DP83902A.html>.
163 tristate "SMC Ultra support"
167 If you have a network (Ethernet) card of this type, say Y and read
168 the Ethernet-HOWTO, available from
169 <http://www.tldp.org/docs.html#howto>.
171 Important: There have been many reports that, with some motherboards
172 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
173 such as some BusLogic models) causes corruption problems with many
174 operating systems. The Linux smc-ultra driver has a work-around for
175 this but keep it in mind if you have such a SCSI card and have
178 To compile this driver as a module, choose M here. The module
179 will be called smc-ultra.
182 tristate "WD80*3 support"
186 If you have a network (Ethernet) card of this type, say Y and read
187 the Ethernet-HOWTO, available from
188 <http://www.tldp.org/docs.html#howto>.
190 To compile this driver as a module, choose M here. The module
194 tristate "Zorro NS8390-based Ethernet support"
198 This driver is for Zorro Ethernet cards using an NS8390-compatible
199 chipset, like the Village Tronic Ariadne II and the Individual
200 Computers X-Surf Ethernet cards. If you have such a card, say Y.
203 To compile this driver as a module, choose M here: the module
204 will be called zorro8390.
206 endif # NET_VENDOR_8390