2 * Synopsys DesignWare Multimedia Card Interface driver
3 * (Based on NXP driver for lpc 31xx)
5 * Copyright (C) 2009 NXP Semiconductors
6 * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
14 #include <linux/blkdev.h>
15 #include <linux/clk.h>
16 #include <linux/debugfs.h>
17 #include <linux/device.h>
18 #include <linux/dma-mapping.h>
19 #include <linux/err.h>
20 #include <linux/init.h>
21 #include <linux/interrupt.h>
22 #include <linux/ioport.h>
23 #include <linux/module.h>
24 #include <linux/platform_device.h>
25 #include <linux/seq_file.h>
26 #include <linux/slab.h>
27 #include <linux/stat.h>
28 #include <linux/delay.h>
29 #include <linux/irq.h>
30 #include <linux/mmc/card.h>
31 #include <linux/mmc/host.h>
32 #include <linux/mmc/mmc.h>
33 #include <linux/mmc/sd.h>
34 #include <linux/mmc/sdio.h>
35 #include <linux/mmc/dw_mmc.h>
36 #include <linux/bitops.h>
37 #include <linux/regulator/consumer.h>
39 #include <linux/of_gpio.h>
40 #include <linux/mmc/slot-gpio.h>
44 /* Common flag combinations */
45 #define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DRTO | SDMMC_INT_DCRC | \
46 SDMMC_INT_HTO | SDMMC_INT_SBE | \
48 #define DW_MCI_CMD_ERROR_FLAGS (SDMMC_INT_RTO | SDMMC_INT_RCRC | \
50 #define DW_MCI_ERROR_FLAGS (DW_MCI_DATA_ERROR_FLAGS | \
51 DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_HLE)
52 #define DW_MCI_SEND_STATUS 1
53 #define DW_MCI_RECV_STATUS 2
54 #define DW_MCI_DMA_THRESHOLD 16
56 #define DW_MCI_FREQ_MAX 200000000 /* unit: HZ */
57 #define DW_MCI_FREQ_MIN 400000 /* unit: HZ */
59 #define IDMAC_INT_CLR (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
60 SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
61 SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
64 struct idmac_desc_64addr {
65 u32 des0; /* Control Descriptor */
67 u32 des1; /* Reserved */
69 u32 des2; /*Buffer sizes */
70 #define IDMAC_64ADDR_SET_BUFFER1_SIZE(d, s) \
71 ((d)->des2 = ((d)->des2 & cpu_to_le32(0x03ffe000)) | \
72 ((cpu_to_le32(s)) & cpu_to_le32(0x1fff)))
74 u32 des3; /* Reserved */
76 u32 des4; /* Lower 32-bits of Buffer Address Pointer 1*/
77 u32 des5; /* Upper 32-bits of Buffer Address Pointer 1*/
79 u32 des6; /* Lower 32-bits of Next Descriptor Address */
80 u32 des7; /* Upper 32-bits of Next Descriptor Address */
84 __le32 des0; /* Control Descriptor */
85 #define IDMAC_DES0_DIC BIT(1)
86 #define IDMAC_DES0_LD BIT(2)
87 #define IDMAC_DES0_FD BIT(3)
88 #define IDMAC_DES0_CH BIT(4)
89 #define IDMAC_DES0_ER BIT(5)
90 #define IDMAC_DES0_CES BIT(30)
91 #define IDMAC_DES0_OWN BIT(31)
93 __le32 des1; /* Buffer sizes */
94 #define IDMAC_SET_BUFFER1_SIZE(d, s) \
95 ((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
97 __le32 des2; /* buffer 1 physical address */
99 __le32 des3; /* buffer 2 physical address */
102 /* Each descriptor can transfer up to 4KB of data in chained mode */
103 #define DW_MCI_DESC_DATA_LENGTH 0x1000
105 static bool dw_mci_reset(struct dw_mci *host);
106 static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
107 static int dw_mci_card_busy(struct mmc_host *mmc);
109 #if defined(CONFIG_DEBUG_FS)
110 static int dw_mci_req_show(struct seq_file *s, void *v)
112 struct dw_mci_slot *slot = s->private;
113 struct mmc_request *mrq;
114 struct mmc_command *cmd;
115 struct mmc_command *stop;
116 struct mmc_data *data;
118 /* Make sure we get a consistent snapshot */
119 spin_lock_bh(&slot->host->lock);
129 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
130 cmd->opcode, cmd->arg, cmd->flags,
131 cmd->resp[0], cmd->resp[1], cmd->resp[2],
132 cmd->resp[2], cmd->error);
134 seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
135 data->bytes_xfered, data->blocks,
136 data->blksz, data->flags, data->error);
139 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
140 stop->opcode, stop->arg, stop->flags,
141 stop->resp[0], stop->resp[1], stop->resp[2],
142 stop->resp[2], stop->error);
145 spin_unlock_bh(&slot->host->lock);
150 static int dw_mci_req_open(struct inode *inode, struct file *file)
152 return single_open(file, dw_mci_req_show, inode->i_private);
155 static const struct file_operations dw_mci_req_fops = {
156 .owner = THIS_MODULE,
157 .open = dw_mci_req_open,
160 .release = single_release,
163 static int dw_mci_regs_show(struct seq_file *s, void *v)
165 seq_printf(s, "STATUS:\t0x%08x\n", SDMMC_STATUS);
166 seq_printf(s, "RINTSTS:\t0x%08x\n", SDMMC_RINTSTS);
167 seq_printf(s, "CMD:\t0x%08x\n", SDMMC_CMD);
168 seq_printf(s, "CTRL:\t0x%08x\n", SDMMC_CTRL);
169 seq_printf(s, "INTMASK:\t0x%08x\n", SDMMC_INTMASK);
170 seq_printf(s, "CLKENA:\t0x%08x\n", SDMMC_CLKENA);
175 static int dw_mci_regs_open(struct inode *inode, struct file *file)
177 return single_open(file, dw_mci_regs_show, inode->i_private);
180 static const struct file_operations dw_mci_regs_fops = {
181 .owner = THIS_MODULE,
182 .open = dw_mci_regs_open,
185 .release = single_release,
188 static void dw_mci_init_debugfs(struct dw_mci_slot *slot)
190 struct mmc_host *mmc = slot->mmc;
191 struct dw_mci *host = slot->host;
195 root = mmc->debugfs_root;
199 node = debugfs_create_file("regs", S_IRUSR, root, host,
204 node = debugfs_create_file("req", S_IRUSR, root, slot,
209 node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
213 node = debugfs_create_x32("pending_events", S_IRUSR, root,
214 (u32 *)&host->pending_events);
218 node = debugfs_create_x32("completed_events", S_IRUSR, root,
219 (u32 *)&host->completed_events);
226 dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
228 #endif /* defined(CONFIG_DEBUG_FS) */
230 static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg);
232 static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
234 struct mmc_data *data;
235 struct dw_mci_slot *slot = mmc_priv(mmc);
236 struct dw_mci *host = slot->host;
237 const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
240 cmd->error = -EINPROGRESS;
243 if (cmd->opcode == MMC_STOP_TRANSMISSION ||
244 cmd->opcode == MMC_GO_IDLE_STATE ||
245 cmd->opcode == MMC_GO_INACTIVE_STATE ||
246 (cmd->opcode == SD_IO_RW_DIRECT &&
247 ((cmd->arg >> 9) & 0x1FFFF) == SDIO_CCCR_ABORT))
248 cmdr |= SDMMC_CMD_STOP;
249 else if (cmd->opcode != MMC_SEND_STATUS && cmd->data)
250 cmdr |= SDMMC_CMD_PRV_DAT_WAIT;
252 if (cmd->opcode == SD_SWITCH_VOLTAGE) {
255 /* Special bit makes CMD11 not die */
256 cmdr |= SDMMC_CMD_VOLT_SWITCH;
258 /* Change state to continue to handle CMD11 weirdness */
259 WARN_ON(slot->host->state != STATE_SENDING_CMD);
260 slot->host->state = STATE_SENDING_CMD11;
263 * We need to disable low power mode (automatic clock stop)
264 * while doing voltage switch so we don't confuse the card,
265 * since stopping the clock is a specific part of the UHS
266 * voltage change dance.
268 * Note that low power mode (SDMMC_CLKEN_LOW_PWR) will be
269 * unconditionally turned back on in dw_mci_setup_bus() if it's
270 * ever called with a non-zero clock. That shouldn't happen
271 * until the voltage change is all done.
273 clk_en_a = mci_readl(host, CLKENA);
274 clk_en_a &= ~(SDMMC_CLKEN_LOW_PWR << slot->id);
275 mci_writel(host, CLKENA, clk_en_a);
276 mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
277 SDMMC_CMD_PRV_DAT_WAIT, 0);
280 if (cmd->flags & MMC_RSP_PRESENT) {
281 /* We expect a response, so set this bit */
282 cmdr |= SDMMC_CMD_RESP_EXP;
283 if (cmd->flags & MMC_RSP_136)
284 cmdr |= SDMMC_CMD_RESP_LONG;
287 if (cmd->flags & MMC_RSP_CRC)
288 cmdr |= SDMMC_CMD_RESP_CRC;
292 cmdr |= SDMMC_CMD_DAT_EXP;
293 if (data->flags & MMC_DATA_STREAM)
294 cmdr |= SDMMC_CMD_STRM_MODE;
295 if (data->flags & MMC_DATA_WRITE)
296 cmdr |= SDMMC_CMD_DAT_WR;
299 if (drv_data && drv_data->prepare_command)
300 drv_data->prepare_command(slot->host, &cmdr);
305 static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
307 struct mmc_command *stop;
313 stop = &host->stop_abort;
315 memset(stop, 0, sizeof(struct mmc_command));
317 if (cmdr == MMC_READ_SINGLE_BLOCK ||
318 cmdr == MMC_READ_MULTIPLE_BLOCK ||
319 cmdr == MMC_WRITE_BLOCK ||
320 cmdr == MMC_WRITE_MULTIPLE_BLOCK ||
321 cmdr == MMC_SEND_TUNING_BLOCK ||
322 cmdr == MMC_SEND_TUNING_BLOCK_HS200) {
323 stop->opcode = MMC_STOP_TRANSMISSION;
325 stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
326 } else if (cmdr == SD_IO_RW_EXTENDED) {
327 stop->opcode = SD_IO_RW_DIRECT;
328 stop->arg |= (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) |
329 ((cmd->arg >> 28) & 0x7);
330 stop->flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
335 cmdr = stop->opcode | SDMMC_CMD_STOP |
336 SDMMC_CMD_RESP_CRC | SDMMC_CMD_RESP_EXP;
341 static void dw_mci_wait_while_busy(struct dw_mci *host, u32 cmd_flags)
343 unsigned long timeout = jiffies + msecs_to_jiffies(500);
346 * Databook says that before issuing a new data transfer command
347 * we need to check to see if the card is busy. Data transfer commands
348 * all have SDMMC_CMD_PRV_DAT_WAIT set, so we'll key off that.
350 * ...also allow sending for SDMMC_CMD_VOLT_SWITCH where busy is
353 if ((cmd_flags & SDMMC_CMD_PRV_DAT_WAIT) &&
354 !(cmd_flags & SDMMC_CMD_VOLT_SWITCH)) {
355 while (mci_readl(host, STATUS) & SDMMC_STATUS_BUSY) {
356 if (time_after(jiffies, timeout)) {
357 /* Command will fail; we'll pass error then */
358 dev_err(host->dev, "Busy; trying anyway\n");
366 static void dw_mci_start_command(struct dw_mci *host,
367 struct mmc_command *cmd, u32 cmd_flags)
371 "start command: ARGR=0x%08x CMDR=0x%08x\n",
372 cmd->arg, cmd_flags);
374 mci_writel(host, CMDARG, cmd->arg);
375 wmb(); /* drain writebuffer */
376 dw_mci_wait_while_busy(host, cmd_flags);
378 mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
381 static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data)
383 struct mmc_command *stop = data->stop ? data->stop : &host->stop_abort;
385 dw_mci_start_command(host, stop, host->stop_cmdr);
388 /* DMA interface functions */
389 static void dw_mci_stop_dma(struct dw_mci *host)
391 if (host->using_dma) {
392 host->dma_ops->stop(host);
393 host->dma_ops->cleanup(host);
396 /* Data transfer was stopped by the interrupt handler */
397 set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
400 static int dw_mci_get_dma_dir(struct mmc_data *data)
402 if (data->flags & MMC_DATA_WRITE)
403 return DMA_TO_DEVICE;
405 return DMA_FROM_DEVICE;
408 static void dw_mci_dma_cleanup(struct dw_mci *host)
410 struct mmc_data *data = host->data;
413 if (!data->host_cookie)
414 dma_unmap_sg(host->dev,
417 dw_mci_get_dma_dir(data));
420 static void dw_mci_idmac_reset(struct dw_mci *host)
422 u32 bmod = mci_readl(host, BMOD);
423 /* Software reset of DMA */
424 bmod |= SDMMC_IDMAC_SWRESET;
425 mci_writel(host, BMOD, bmod);
428 static void dw_mci_idmac_stop_dma(struct dw_mci *host)
432 /* Disable and reset the IDMAC interface */
433 temp = mci_readl(host, CTRL);
434 temp &= ~SDMMC_CTRL_USE_IDMAC;
435 temp |= SDMMC_CTRL_DMA_RESET;
436 mci_writel(host, CTRL, temp);
438 /* Stop the IDMAC running */
439 temp = mci_readl(host, BMOD);
440 temp &= ~(SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB);
441 temp |= SDMMC_IDMAC_SWRESET;
442 mci_writel(host, BMOD, temp);
445 static void dw_mci_dmac_complete_dma(void *arg)
447 struct dw_mci *host = arg;
448 struct mmc_data *data = host->data;
450 dev_vdbg(host->dev, "DMA complete\n");
452 if ((host->use_dma == TRANS_MODE_EDMAC) &&
453 data && (data->flags & MMC_DATA_READ))
454 /* Invalidate cache after read */
455 dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
460 host->dma_ops->cleanup(host);
463 * If the card was removed, data will be NULL. No point in trying to
464 * send the stop command or waiting for NBUSY in this case.
467 set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
468 tasklet_schedule(&host->tasklet);
472 static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
475 unsigned int desc_len;
478 if (host->dma_64bit_address == 1) {
479 struct idmac_desc_64addr *desc_first, *desc_last, *desc;
481 desc_first = desc_last = desc = host->sg_cpu;
483 for (i = 0; i < sg_len; i++) {
484 unsigned int length = sg_dma_len(&data->sg[i]);
486 u64 mem_addr = sg_dma_address(&data->sg[i]);
488 for ( ; length ; desc++) {
489 desc_len = (length <= DW_MCI_DESC_DATA_LENGTH) ?
490 length : DW_MCI_DESC_DATA_LENGTH;
495 * Set the OWN bit and disable interrupts
496 * for this descriptor
498 desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
502 IDMAC_64ADDR_SET_BUFFER1_SIZE(desc, desc_len);
504 /* Physical address to DMA to/from */
505 desc->des4 = mem_addr & 0xffffffff;
506 desc->des5 = mem_addr >> 32;
508 /* Update physical address for the next desc */
509 mem_addr += desc_len;
511 /* Save pointer to the last descriptor */
516 /* Set first descriptor */
517 desc_first->des0 |= IDMAC_DES0_FD;
519 /* Set last descriptor */
520 desc_last->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
521 desc_last->des0 |= IDMAC_DES0_LD;
524 struct idmac_desc *desc_first, *desc_last, *desc;
526 desc_first = desc_last = desc = host->sg_cpu;
528 for (i = 0; i < sg_len; i++) {
529 unsigned int length = sg_dma_len(&data->sg[i]);
531 u32 mem_addr = sg_dma_address(&data->sg[i]);
533 for ( ; length ; desc++) {
534 desc_len = (length <= DW_MCI_DESC_DATA_LENGTH) ?
535 length : DW_MCI_DESC_DATA_LENGTH;
540 * Set the OWN bit and disable interrupts
541 * for this descriptor
543 desc->des0 = cpu_to_le32(IDMAC_DES0_OWN |
548 IDMAC_SET_BUFFER1_SIZE(desc, desc_len);
550 /* Physical address to DMA to/from */
551 desc->des2 = cpu_to_le32(mem_addr);
553 /* Update physical address for the next desc */
554 mem_addr += desc_len;
556 /* Save pointer to the last descriptor */
561 /* Set first descriptor */
562 desc_first->des0 |= cpu_to_le32(IDMAC_DES0_FD);
564 /* Set last descriptor */
565 desc_last->des0 &= cpu_to_le32(~(IDMAC_DES0_CH |
567 desc_last->des0 |= cpu_to_le32(IDMAC_DES0_LD);
570 wmb(); /* drain writebuffer */
573 static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
577 dw_mci_translate_sglist(host, host->data, sg_len);
579 /* Make sure to reset DMA in case we did PIO before this */
580 dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET);
581 dw_mci_idmac_reset(host);
583 /* Select IDMAC interface */
584 temp = mci_readl(host, CTRL);
585 temp |= SDMMC_CTRL_USE_IDMAC;
586 mci_writel(host, CTRL, temp);
588 /* drain writebuffer */
591 /* Enable the IDMAC */
592 temp = mci_readl(host, BMOD);
593 temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB;
594 mci_writel(host, BMOD, temp);
596 /* Start it running */
597 mci_writel(host, PLDMND, 1);
602 static int dw_mci_idmac_init(struct dw_mci *host)
606 if (host->dma_64bit_address == 1) {
607 struct idmac_desc_64addr *p;
608 /* Number of descriptors in the ring buffer */
609 host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc_64addr);
611 /* Forward link the descriptor list */
612 for (i = 0, p = host->sg_cpu; i < host->ring_size - 1;
614 p->des6 = (host->sg_dma +
615 (sizeof(struct idmac_desc_64addr) *
616 (i + 1))) & 0xffffffff;
618 p->des7 = (u64)(host->sg_dma +
619 (sizeof(struct idmac_desc_64addr) *
621 /* Initialize reserved and buffer size fields to "0" */
627 /* Set the last descriptor as the end-of-ring descriptor */
628 p->des6 = host->sg_dma & 0xffffffff;
629 p->des7 = (u64)host->sg_dma >> 32;
630 p->des0 = IDMAC_DES0_ER;
633 struct idmac_desc *p;
634 /* Number of descriptors in the ring buffer */
635 host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
637 /* Forward link the descriptor list */
638 for (i = 0, p = host->sg_cpu;
639 i < host->ring_size - 1;
641 p->des3 = cpu_to_le32(host->sg_dma +
642 (sizeof(struct idmac_desc) * (i + 1)));
646 /* Set the last descriptor as the end-of-ring descriptor */
647 p->des3 = cpu_to_le32(host->sg_dma);
648 p->des0 = cpu_to_le32(IDMAC_DES0_ER);
651 dw_mci_idmac_reset(host);
653 if (host->dma_64bit_address == 1) {
654 /* Mask out interrupts - get Tx & Rx complete only */
655 mci_writel(host, IDSTS64, IDMAC_INT_CLR);
656 mci_writel(host, IDINTEN64, SDMMC_IDMAC_INT_NI |
657 SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
659 /* Set the descriptor base address */
660 mci_writel(host, DBADDRL, host->sg_dma & 0xffffffff);
661 mci_writel(host, DBADDRU, (u64)host->sg_dma >> 32);
664 /* Mask out interrupts - get Tx & Rx complete only */
665 mci_writel(host, IDSTS, IDMAC_INT_CLR);
666 mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI |
667 SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
669 /* Set the descriptor base address */
670 mci_writel(host, DBADDR, host->sg_dma);
676 static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
677 .init = dw_mci_idmac_init,
678 .start = dw_mci_idmac_start_dma,
679 .stop = dw_mci_idmac_stop_dma,
680 .complete = dw_mci_dmac_complete_dma,
681 .cleanup = dw_mci_dma_cleanup,
684 static void dw_mci_edmac_stop_dma(struct dw_mci *host)
686 dmaengine_terminate_all(host->dms->ch);
689 static int dw_mci_edmac_start_dma(struct dw_mci *host,
692 struct dma_slave_config cfg;
693 struct dma_async_tx_descriptor *desc = NULL;
694 struct scatterlist *sgl = host->data->sg;
695 const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
696 u32 sg_elems = host->data->sg_len;
698 u32 fifo_offset = host->fifo_reg - host->regs;
701 /* Set external dma config: burst size, burst width */
702 cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
703 cfg.src_addr = cfg.dst_addr;
704 cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
705 cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
707 /* Match burst msize with external dma config */
708 fifoth_val = mci_readl(host, FIFOTH);
709 cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7];
710 cfg.src_maxburst = cfg.dst_maxburst;
712 if (host->data->flags & MMC_DATA_WRITE)
713 cfg.direction = DMA_MEM_TO_DEV;
715 cfg.direction = DMA_DEV_TO_MEM;
717 ret = dmaengine_slave_config(host->dms->ch, &cfg);
719 dev_err(host->dev, "Failed to config edmac.\n");
723 desc = dmaengine_prep_slave_sg(host->dms->ch, sgl,
724 sg_len, cfg.direction,
725 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
727 dev_err(host->dev, "Can't prepare slave sg.\n");
731 /* Set dw_mci_dmac_complete_dma as callback */
732 desc->callback = dw_mci_dmac_complete_dma;
733 desc->callback_param = (void *)host;
734 dmaengine_submit(desc);
736 /* Flush cache before write */
737 if (host->data->flags & MMC_DATA_WRITE)
738 dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl,
739 sg_elems, DMA_TO_DEVICE);
741 dma_async_issue_pending(host->dms->ch);
746 static int dw_mci_edmac_init(struct dw_mci *host)
748 /* Request external dma channel */
749 host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
753 host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
754 if (!host->dms->ch) {
755 dev_err(host->dev, "Failed to get external DMA channel.\n");
764 static void dw_mci_edmac_exit(struct dw_mci *host)
768 dma_release_channel(host->dms->ch);
769 host->dms->ch = NULL;
776 static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
777 .init = dw_mci_edmac_init,
778 .exit = dw_mci_edmac_exit,
779 .start = dw_mci_edmac_start_dma,
780 .stop = dw_mci_edmac_stop_dma,
781 .complete = dw_mci_dmac_complete_dma,
782 .cleanup = dw_mci_dma_cleanup,
785 static int dw_mci_pre_dma_transfer(struct dw_mci *host,
786 struct mmc_data *data,
789 struct scatterlist *sg;
790 unsigned int i, sg_len;
792 if (!next && data->host_cookie)
793 return data->host_cookie;
796 * We don't do DMA on "complex" transfers, i.e. with
797 * non-word-aligned buffers or lengths. Also, we don't bother
798 * with all the DMA setup overhead for short transfers.
800 if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD)
806 for_each_sg(data->sg, sg, data->sg_len, i) {
807 if (sg->offset & 3 || sg->length & 3)
811 sg_len = dma_map_sg(host->dev,
814 dw_mci_get_dma_dir(data));
819 data->host_cookie = sg_len;
824 static void dw_mci_pre_req(struct mmc_host *mmc,
825 struct mmc_request *mrq,
828 struct dw_mci_slot *slot = mmc_priv(mmc);
829 struct mmc_data *data = mrq->data;
831 if (!slot->host->use_dma || !data)
834 if (data->host_cookie) {
835 data->host_cookie = 0;
839 if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0)
840 data->host_cookie = 0;
843 static void dw_mci_post_req(struct mmc_host *mmc,
844 struct mmc_request *mrq,
847 struct dw_mci_slot *slot = mmc_priv(mmc);
848 struct mmc_data *data = mrq->data;
850 if (!slot->host->use_dma || !data)
853 if (data->host_cookie)
854 dma_unmap_sg(slot->host->dev,
857 dw_mci_get_dma_dir(data));
858 data->host_cookie = 0;
861 static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
863 unsigned int blksz = data->blksz;
864 const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
865 u32 fifo_width = 1 << host->data_shift;
866 u32 blksz_depth = blksz / fifo_width, fifoth_val;
867 u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
868 int idx = ARRAY_SIZE(mszs) - 1;
870 /* pio should ship this scenario */
874 tx_wmark = (host->fifo_depth) / 2;
875 tx_wmark_invers = host->fifo_depth - tx_wmark;
879 * if blksz is not a multiple of the FIFO width
881 if (blksz % fifo_width) {
888 if (!((blksz_depth % mszs[idx]) ||
889 (tx_wmark_invers % mszs[idx]))) {
891 rx_wmark = mszs[idx] - 1;
896 * If idx is '0', it won't be tried
897 * Thus, initial values are uesed
900 fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
901 mci_writel(host, FIFOTH, fifoth_val);
904 static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
906 unsigned int blksz = data->blksz;
907 u32 blksz_depth, fifo_depth;
910 WARN_ON(!(data->flags & MMC_DATA_READ));
913 * CDTHRCTL doesn't exist prior to 240A (in fact that register offset is
914 * in the FIFO region, so we really shouldn't access it).
916 if (host->verid < DW_MMC_240A)
919 if (host->timing != MMC_TIMING_MMC_HS200 &&
920 host->timing != MMC_TIMING_MMC_HS400 &&
921 host->timing != MMC_TIMING_UHS_SDR104)
924 blksz_depth = blksz / (1 << host->data_shift);
925 fifo_depth = host->fifo_depth;
927 if (blksz_depth > fifo_depth)
931 * If (blksz_depth) >= (fifo_depth >> 1), should be 'thld_size <= blksz'
932 * If (blksz_depth) < (fifo_depth >> 1), should be thld_size = blksz
933 * Currently just choose blksz.
936 mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(thld_size, 1));
940 mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(0, 0));
943 static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
945 unsigned long irqflags;
951 /* If we don't have a channel, we can't do DMA */
955 sg_len = dw_mci_pre_dma_transfer(host, data, 0);
957 host->dma_ops->stop(host);
963 if (host->use_dma == TRANS_MODE_IDMAC)
965 "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
966 (unsigned long)host->sg_cpu,
967 (unsigned long)host->sg_dma,
971 * Decide the MSIZE and RX/TX Watermark.
972 * If current block size is same with previous size,
973 * no need to update fifoth.
975 if (host->prev_blksz != data->blksz)
976 dw_mci_adjust_fifoth(host, data);
978 /* Enable the DMA interface */
979 temp = mci_readl(host, CTRL);
980 temp |= SDMMC_CTRL_DMA_ENABLE;
981 mci_writel(host, CTRL, temp);
983 /* Disable RX/TX IRQs, let DMA handle it */
984 spin_lock_irqsave(&host->irq_lock, irqflags);
985 temp = mci_readl(host, INTMASK);
986 temp &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR);
987 mci_writel(host, INTMASK, temp);
988 spin_unlock_irqrestore(&host->irq_lock, irqflags);
990 if (host->dma_ops->start(host, sg_len)) {
991 /* We can't do DMA */
992 dev_err(host->dev, "%s: failed to start DMA.\n", __func__);
999 static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
1001 unsigned long irqflags;
1002 int flags = SG_MITER_ATOMIC;
1005 data->error = -EINPROGRESS;
1007 WARN_ON(host->data);
1011 if (data->flags & MMC_DATA_READ) {
1012 host->dir_status = DW_MCI_RECV_STATUS;
1013 dw_mci_ctrl_rd_thld(host, data);
1015 host->dir_status = DW_MCI_SEND_STATUS;
1018 if (dw_mci_submit_data_dma(host, data)) {
1019 if (host->data->flags & MMC_DATA_READ)
1020 flags |= SG_MITER_TO_SG;
1022 flags |= SG_MITER_FROM_SG;
1024 sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
1025 host->sg = data->sg;
1026 host->part_buf_start = 0;
1027 host->part_buf_count = 0;
1029 mci_writel(host, RINTSTS, SDMMC_INT_TXDR | SDMMC_INT_RXDR);
1031 spin_lock_irqsave(&host->irq_lock, irqflags);
1032 temp = mci_readl(host, INTMASK);
1033 temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR;
1034 mci_writel(host, INTMASK, temp);
1035 spin_unlock_irqrestore(&host->irq_lock, irqflags);
1037 temp = mci_readl(host, CTRL);
1038 temp &= ~SDMMC_CTRL_DMA_ENABLE;
1039 mci_writel(host, CTRL, temp);
1042 * Use the initial fifoth_val for PIO mode.
1043 * If next issued data may be transfered by DMA mode,
1044 * prev_blksz should be invalidated.
1046 mci_writel(host, FIFOTH, host->fifoth_val);
1047 host->prev_blksz = 0;
1050 * Keep the current block size.
1051 * It will be used to decide whether to update
1052 * fifoth register next time.
1054 host->prev_blksz = data->blksz;
1058 static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
1060 struct dw_mci *host = slot->host;
1061 unsigned long timeout = jiffies + msecs_to_jiffies(500);
1062 unsigned int cmd_status = 0;
1064 mci_writel(host, CMDARG, arg);
1065 wmb(); /* drain writebuffer */
1066 dw_mci_wait_while_busy(host, cmd);
1067 mci_writel(host, CMD, SDMMC_CMD_START | cmd);
1069 while (time_before(jiffies, timeout)) {
1070 cmd_status = mci_readl(host, CMD);
1071 if (!(cmd_status & SDMMC_CMD_START))
1074 dev_err(&slot->mmc->class_dev,
1075 "Timeout sending command (cmd %#x arg %#x status %#x)\n",
1076 cmd, arg, cmd_status);
1079 static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
1081 struct dw_mci *host = slot->host;
1082 unsigned int clock = slot->clock;
1085 u32 sdmmc_cmd_bits = SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT;
1087 /* We must continue to set bit 28 in CMD until the change is complete */
1088 if (host->state == STATE_WAITING_CMD11_DONE)
1089 sdmmc_cmd_bits |= SDMMC_CMD_VOLT_SWITCH;
1092 mci_writel(host, CLKENA, 0);
1093 mci_send_cmd(slot, sdmmc_cmd_bits, 0);
1094 } else if (clock != host->current_speed || force_clkinit) {
1095 div = host->bus_hz / clock;
1096 if (host->bus_hz % clock && host->bus_hz > clock)
1098 * move the + 1 after the divide to prevent
1099 * over-clocking the card.
1103 div = (host->bus_hz != clock) ? DIV_ROUND_UP(div, 2) : 0;
1105 if ((clock << div) != slot->__clk_old || force_clkinit)
1106 dev_info(&slot->mmc->class_dev,
1107 "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
1108 slot->id, host->bus_hz, clock,
1109 div ? ((host->bus_hz / div) >> 1) :
1113 mci_writel(host, CLKENA, 0);
1114 mci_writel(host, CLKSRC, 0);
1117 mci_send_cmd(slot, sdmmc_cmd_bits, 0);
1119 /* set clock to desired speed */
1120 mci_writel(host, CLKDIV, div);
1123 mci_send_cmd(slot, sdmmc_cmd_bits, 0);
1125 /* enable clock; only low power if no SDIO */
1126 clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
1127 if (!test_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags))
1128 clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
1129 mci_writel(host, CLKENA, clk_en_a);
1132 mci_send_cmd(slot, sdmmc_cmd_bits, 0);
1134 /* keep the clock with reflecting clock dividor */
1135 slot->__clk_old = clock << div;
1138 host->current_speed = clock;
1140 /* Set the current slot bus width */
1141 mci_writel(host, CTYPE, (slot->ctype << slot->id));
1144 static void __dw_mci_start_request(struct dw_mci *host,
1145 struct dw_mci_slot *slot,
1146 struct mmc_command *cmd)
1148 struct mmc_request *mrq;
1149 struct mmc_data *data;
1154 host->cur_slot = slot;
1157 host->pending_events = 0;
1158 host->completed_events = 0;
1159 host->cmd_status = 0;
1160 host->data_status = 0;
1161 host->dir_status = 0;
1165 mci_writel(host, TMOUT, 0xFFFFFFFF);
1166 mci_writel(host, BYTCNT, data->blksz*data->blocks);
1167 mci_writel(host, BLKSIZ, data->blksz);
1170 cmdflags = dw_mci_prepare_command(slot->mmc, cmd);
1172 /* this is the first command, send the initialization clock */
1173 if (test_and_clear_bit(DW_MMC_CARD_NEED_INIT, &slot->flags))
1174 cmdflags |= SDMMC_CMD_INIT;
1177 dw_mci_submit_data(host, data);
1178 wmb(); /* drain writebuffer */
1181 dw_mci_start_command(host, cmd, cmdflags);
1183 if (cmd->opcode == SD_SWITCH_VOLTAGE) {
1184 unsigned long irqflags;
1187 * Databook says to fail after 2ms w/ no response, but evidence
1188 * shows that sometimes the cmd11 interrupt takes over 130ms.
1189 * We'll set to 500ms, plus an extra jiffy just in case jiffies
1190 * is just about to roll over.
1192 * We do this whole thing under spinlock and only if the
1193 * command hasn't already completed (indicating the the irq
1194 * already ran so we don't want the timeout).
1196 spin_lock_irqsave(&host->irq_lock, irqflags);
1197 if (!test_bit(EVENT_CMD_COMPLETE, &host->pending_events))
1198 mod_timer(&host->cmd11_timer,
1199 jiffies + msecs_to_jiffies(500) + 1);
1200 spin_unlock_irqrestore(&host->irq_lock, irqflags);
1204 host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
1206 host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
1209 static void dw_mci_start_request(struct dw_mci *host,
1210 struct dw_mci_slot *slot)
1212 struct mmc_request *mrq = slot->mrq;
1213 struct mmc_command *cmd;
1215 cmd = mrq->sbc ? mrq->sbc : mrq->cmd;
1216 __dw_mci_start_request(host, slot, cmd);
1219 /* must be called with host->lock held */
1220 static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot,
1221 struct mmc_request *mrq)
1223 dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
1228 if (host->state == STATE_WAITING_CMD11_DONE) {
1229 dev_warn(&slot->mmc->class_dev,
1230 "Voltage change didn't complete\n");
1232 * this case isn't expected to happen, so we can
1233 * either crash here or just try to continue on
1234 * in the closest possible state
1236 host->state = STATE_IDLE;
1239 if (host->state == STATE_IDLE) {
1240 host->state = STATE_SENDING_CMD;
1241 dw_mci_start_request(host, slot);
1243 list_add_tail(&slot->queue_node, &host->queue);
1247 static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1249 struct dw_mci_slot *slot = mmc_priv(mmc);
1250 struct dw_mci *host = slot->host;
1255 * The check for card presence and queueing of the request must be
1256 * atomic, otherwise the card could be removed in between and the
1257 * request wouldn't fail until another card was inserted.
1259 spin_lock_bh(&host->lock);
1261 if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
1262 spin_unlock_bh(&host->lock);
1263 mrq->cmd->error = -ENOMEDIUM;
1264 mmc_request_done(mmc, mrq);
1268 dw_mci_queue_request(host, slot, mrq);
1270 spin_unlock_bh(&host->lock);
1273 static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1275 struct dw_mci_slot *slot = mmc_priv(mmc);
1276 const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
1280 switch (ios->bus_width) {
1281 case MMC_BUS_WIDTH_4:
1282 slot->ctype = SDMMC_CTYPE_4BIT;
1284 case MMC_BUS_WIDTH_8:
1285 slot->ctype = SDMMC_CTYPE_8BIT;
1288 /* set default 1 bit mode */
1289 slot->ctype = SDMMC_CTYPE_1BIT;
1292 regs = mci_readl(slot->host, UHS_REG);
1295 if (ios->timing == MMC_TIMING_MMC_DDR52 ||
1296 ios->timing == MMC_TIMING_UHS_DDR50 ||
1297 ios->timing == MMC_TIMING_MMC_HS400)
1298 regs |= ((0x1 << slot->id) << 16);
1300 regs &= ~((0x1 << slot->id) << 16);
1302 mci_writel(slot->host, UHS_REG, regs);
1303 slot->host->timing = ios->timing;
1306 * Use mirror of ios->clock to prevent race with mmc
1307 * core ios update when finding the minimum.
1309 slot->clock = ios->clock;
1311 if (drv_data && drv_data->set_ios)
1312 drv_data->set_ios(slot->host, ios);
1314 switch (ios->power_mode) {
1316 if (!IS_ERR(mmc->supply.vmmc)) {
1317 ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
1320 dev_err(slot->host->dev,
1321 "failed to enable vmmc regulator\n");
1322 /*return, if failed turn on vmmc*/
1326 set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
1327 regs = mci_readl(slot->host, PWREN);
1328 regs |= (1 << slot->id);
1329 mci_writel(slot->host, PWREN, regs);
1332 if (!slot->host->vqmmc_enabled) {
1333 if (!IS_ERR(mmc->supply.vqmmc)) {
1334 ret = regulator_enable(mmc->supply.vqmmc);
1336 dev_err(slot->host->dev,
1337 "failed to enable vqmmc\n");
1339 slot->host->vqmmc_enabled = true;
1342 /* Keep track so we don't reset again */
1343 slot->host->vqmmc_enabled = true;
1346 /* Reset our state machine after powering on */
1347 dw_mci_ctrl_reset(slot->host,
1348 SDMMC_CTRL_ALL_RESET_FLAGS);
1351 /* Adjust clock / bus width after power is up */
1352 dw_mci_setup_bus(slot, false);
1356 /* Turn clock off before power goes down */
1357 dw_mci_setup_bus(slot, false);
1359 if (!IS_ERR(mmc->supply.vmmc))
1360 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
1362 if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled)
1363 regulator_disable(mmc->supply.vqmmc);
1364 slot->host->vqmmc_enabled = false;
1366 regs = mci_readl(slot->host, PWREN);
1367 regs &= ~(1 << slot->id);
1368 mci_writel(slot->host, PWREN, regs);
1374 if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
1375 slot->host->state = STATE_IDLE;
1378 static int dw_mci_card_busy(struct mmc_host *mmc)
1380 struct dw_mci_slot *slot = mmc_priv(mmc);
1384 * Check the busy bit which is low when DAT[3:0]
1385 * (the data lines) are 0000
1387 status = mci_readl(slot->host, STATUS);
1389 return !!(status & SDMMC_STATUS_BUSY);
1392 static int dw_mci_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
1394 struct dw_mci_slot *slot = mmc_priv(mmc);
1395 struct dw_mci *host = slot->host;
1396 const struct dw_mci_drv_data *drv_data = host->drv_data;
1398 u32 v18 = SDMMC_UHS_18V << slot->id;
1401 if (drv_data && drv_data->switch_voltage)
1402 return drv_data->switch_voltage(mmc, ios);
1405 * Program the voltage. Note that some instances of dw_mmc may use
1406 * the UHS_REG for this. For other instances (like exynos) the UHS_REG
1407 * does no harm but you need to set the regulator directly. Try both.
1409 uhs = mci_readl(host, UHS_REG);
1410 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
1415 if (!IS_ERR(mmc->supply.vqmmc)) {
1416 ret = mmc_regulator_set_vqmmc(mmc, ios);
1419 dev_dbg(&mmc->class_dev,
1420 "Regulator set error %d - %s V\n",
1421 ret, uhs & v18 ? "1.8" : "3.3");
1425 mci_writel(host, UHS_REG, uhs);
1430 static int dw_mci_get_ro(struct mmc_host *mmc)
1433 struct dw_mci_slot *slot = mmc_priv(mmc);
1434 int gpio_ro = mmc_gpio_get_ro(mmc);
1436 /* Use platform get_ro function, else try on board write protect */
1437 if (!IS_ERR_VALUE(gpio_ro))
1438 read_only = gpio_ro;
1441 mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
1443 dev_dbg(&mmc->class_dev, "card is %s\n",
1444 read_only ? "read-only" : "read-write");
1449 static int dw_mci_set_sdio_status(struct mmc_host *mmc, int val)
1451 struct dw_mci_slot *slot = mmc_priv(mmc);
1452 struct dw_mci *host = slot->host;
1454 if (!(mmc->restrict_caps & RESTRICT_CARD_TYPE_SDIO))
1457 spin_lock_bh(&host->lock);
1460 set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
1462 clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
1464 spin_unlock_bh(&host->lock);
1466 mmc_detect_change(slot->mmc, 20);
1471 static int dw_mci_get_cd(struct mmc_host *mmc)
1474 struct dw_mci_slot *slot = mmc_priv(mmc);
1475 struct dw_mci_board *brd = slot->host->pdata;
1476 struct dw_mci *host = slot->host;
1477 int gpio_cd = mmc_gpio_get_cd(mmc);
1479 /* Use platform get_cd function, else try onboard card detect */
1480 if ((brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) ||
1481 (mmc->caps & MMC_CAP_NONREMOVABLE))
1483 else if (!IS_ERR_VALUE(gpio_cd))
1486 present = (mci_readl(slot->host, CDETECT) & (1 << slot->id))
1489 spin_lock_bh(&host->lock);
1491 set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
1492 dev_dbg(&mmc->class_dev, "card is present\n");
1494 clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
1495 dev_dbg(&mmc->class_dev, "card is not present\n");
1497 spin_unlock_bh(&host->lock);
1502 static void dw_mci_init_card(struct mmc_host *mmc, struct mmc_card *card)
1504 struct dw_mci_slot *slot = mmc_priv(mmc);
1505 struct dw_mci *host = slot->host;
1508 * Low power mode will stop the card clock when idle. According to the
1509 * description of the CLKENA register we should disable low power mode
1510 * for SDIO cards if we need SDIO interrupts to work.
1512 if (mmc->caps & MMC_CAP_SDIO_IRQ) {
1513 const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
1517 clk_en_a_old = mci_readl(host, CLKENA);
1519 if (card->type == MMC_TYPE_SDIO ||
1520 card->type == MMC_TYPE_SD_COMBO) {
1521 set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
1522 clk_en_a = clk_en_a_old & ~clken_low_pwr;
1524 clear_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
1525 clk_en_a = clk_en_a_old | clken_low_pwr;
1528 if (clk_en_a != clk_en_a_old) {
1529 mci_writel(host, CLKENA, clk_en_a);
1530 mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
1531 SDMMC_CMD_PRV_DAT_WAIT, 0);
1536 static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
1538 struct dw_mci_slot *slot = mmc_priv(mmc);
1539 struct dw_mci *host = slot->host;
1540 unsigned long irqflags;
1543 spin_lock_irqsave(&host->irq_lock, irqflags);
1545 /* Enable/disable Slot Specific SDIO interrupt */
1546 int_mask = mci_readl(host, INTMASK);
1548 int_mask |= SDMMC_INT_SDIO(slot->sdio_id);
1550 int_mask &= ~SDMMC_INT_SDIO(slot->sdio_id);
1551 mci_writel(host, INTMASK, int_mask);
1553 spin_unlock_irqrestore(&host->irq_lock, irqflags);
1556 static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
1558 struct dw_mci_slot *slot = mmc_priv(mmc);
1559 struct dw_mci *host = slot->host;
1560 const struct dw_mci_drv_data *drv_data = host->drv_data;
1563 if (drv_data && drv_data->execute_tuning)
1564 err = drv_data->execute_tuning(slot, opcode);
1568 static int dw_mci_prepare_hs400_tuning(struct mmc_host *mmc,
1569 struct mmc_ios *ios)
1571 struct dw_mci_slot *slot = mmc_priv(mmc);
1572 struct dw_mci *host = slot->host;
1573 const struct dw_mci_drv_data *drv_data = host->drv_data;
1575 if (drv_data && drv_data->prepare_hs400_tuning)
1576 return drv_data->prepare_hs400_tuning(host, ios);
1581 static const struct mmc_host_ops dw_mci_ops = {
1582 .request = dw_mci_request,
1583 .pre_req = dw_mci_pre_req,
1584 .post_req = dw_mci_post_req,
1585 .set_ios = dw_mci_set_ios,
1586 .set_sdio_status = dw_mci_set_sdio_status,
1587 .get_ro = dw_mci_get_ro,
1588 .get_cd = dw_mci_get_cd,
1589 .enable_sdio_irq = dw_mci_enable_sdio_irq,
1590 .execute_tuning = dw_mci_execute_tuning,
1591 .card_busy = dw_mci_card_busy,
1592 .start_signal_voltage_switch = dw_mci_switch_voltage,
1593 .init_card = dw_mci_init_card,
1594 .prepare_hs400_tuning = dw_mci_prepare_hs400_tuning,
1597 static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
1598 __releases(&host->lock)
1599 __acquires(&host->lock)
1601 struct dw_mci_slot *slot;
1602 struct mmc_host *prev_mmc = host->cur_slot->mmc;
1604 WARN_ON(host->cmd || host->data);
1606 host->cur_slot->mrq = NULL;
1608 if (!list_empty(&host->queue)) {
1609 slot = list_entry(host->queue.next,
1610 struct dw_mci_slot, queue_node);
1611 list_del(&slot->queue_node);
1612 dev_vdbg(host->dev, "list not empty: %s is next\n",
1613 mmc_hostname(slot->mmc));
1614 host->state = STATE_SENDING_CMD;
1615 dw_mci_start_request(host, slot);
1617 dev_vdbg(host->dev, "list empty\n");
1619 if (host->state == STATE_SENDING_CMD11)
1620 host->state = STATE_WAITING_CMD11_DONE;
1622 host->state = STATE_IDLE;
1625 spin_unlock(&host->lock);
1626 mmc_request_done(prev_mmc, mrq);
1627 spin_lock(&host->lock);
1630 static int dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd)
1632 u32 status = host->cmd_status;
1634 host->cmd_status = 0;
1636 /* Read the response from the card (up to 16 bytes) */
1637 if (cmd->flags & MMC_RSP_PRESENT) {
1638 if (cmd->flags & MMC_RSP_136) {
1639 cmd->resp[3] = mci_readl(host, RESP0);
1640 cmd->resp[2] = mci_readl(host, RESP1);
1641 cmd->resp[1] = mci_readl(host, RESP2);
1642 cmd->resp[0] = mci_readl(host, RESP3);
1644 cmd->resp[0] = mci_readl(host, RESP0);
1651 if (status & SDMMC_INT_RTO)
1652 cmd->error = -ETIMEDOUT;
1653 else if ((cmd->flags & MMC_RSP_CRC) && (status & SDMMC_INT_RCRC))
1654 cmd->error = -EILSEQ;
1655 else if (status & SDMMC_INT_RESP_ERR)
1661 /* newer ip versions need a delay between retries */
1662 if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY)
1669 static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
1671 u32 status = host->data_status;
1673 if (status & DW_MCI_DATA_ERROR_FLAGS) {
1674 if (status & SDMMC_INT_DRTO) {
1675 data->error = -ETIMEDOUT;
1676 } else if (status & SDMMC_INT_DCRC) {
1677 data->error = -EILSEQ;
1678 } else if (status & SDMMC_INT_EBE) {
1679 if (host->dir_status ==
1680 DW_MCI_SEND_STATUS) {
1682 * No data CRC status was returned.
1683 * The number of bytes transferred
1684 * will be exaggerated in PIO mode.
1686 data->bytes_xfered = 0;
1687 data->error = -ETIMEDOUT;
1688 } else if (host->dir_status ==
1689 DW_MCI_RECV_STATUS) {
1693 /* SDMMC_INT_SBE is included */
1697 dev_dbg(host->dev, "data error, status 0x%08x\n", status);
1700 * After an error, there may be data lingering
1705 data->bytes_xfered = data->blocks * data->blksz;
1712 static void dw_mci_set_drto(struct dw_mci *host)
1714 unsigned int drto_clks;
1715 unsigned int drto_ms;
1717 drto_clks = mci_readl(host, TMOUT) >> 8;
1718 drto_ms = DIV_ROUND_UP(drto_clks, host->bus_hz / 1000);
1720 /* add a bit spare time */
1723 mod_timer(&host->dto_timer, jiffies + msecs_to_jiffies(drto_ms));
1726 static void dw_mci_tasklet_func(unsigned long priv)
1728 struct dw_mci *host = (struct dw_mci *)priv;
1729 struct mmc_data *data;
1730 struct mmc_command *cmd;
1731 struct mmc_request *mrq;
1732 enum dw_mci_state state;
1733 enum dw_mci_state prev_state;
1736 spin_lock(&host->lock);
1738 state = host->state;
1747 case STATE_WAITING_CMD11_DONE:
1750 case STATE_SENDING_CMD11:
1751 case STATE_SENDING_CMD:
1752 if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
1753 &host->pending_events))
1758 set_bit(EVENT_CMD_COMPLETE, &host->completed_events);
1759 err = dw_mci_command_complete(host, cmd);
1760 if (cmd == mrq->sbc && !err) {
1761 prev_state = state = STATE_SENDING_CMD;
1762 __dw_mci_start_request(host, host->cur_slot,
1767 if (cmd->data && err) {
1768 dw_mci_stop_dma(host);
1769 send_stop_abort(host, data);
1770 state = STATE_SENDING_STOP;
1774 if (!cmd->data || err) {
1775 dw_mci_request_end(host, mrq);
1779 prev_state = state = STATE_SENDING_DATA;
1782 case STATE_SENDING_DATA:
1784 * We could get a data error and never a transfer
1785 * complete so we'd better check for it here.
1787 * Note that we don't really care if we also got a
1788 * transfer complete; stopping the DMA and sending an
1791 if (test_and_clear_bit(EVENT_DATA_ERROR,
1792 &host->pending_events)) {
1793 dw_mci_stop_dma(host);
1795 !(host->data_status & (SDMMC_INT_DRTO |
1797 send_stop_abort(host, data);
1798 state = STATE_DATA_ERROR;
1802 if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
1803 &host->pending_events)) {
1805 * If all data-related interrupts don't come
1806 * within the given time in reading data state.
1808 if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
1809 (host->dir_status == DW_MCI_RECV_STATUS))
1810 dw_mci_set_drto(host);
1814 set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
1817 * Handle an EVENT_DATA_ERROR that might have shown up
1818 * before the transfer completed. This might not have
1819 * been caught by the check above because the interrupt
1820 * could have gone off between the previous check and
1821 * the check for transfer complete.
1823 * Technically this ought not be needed assuming we
1824 * get a DATA_COMPLETE eventually (we'll notice the
1825 * error and end the request), but it shouldn't hurt.
1827 * This has the advantage of sending the stop command.
1829 if (test_and_clear_bit(EVENT_DATA_ERROR,
1830 &host->pending_events)) {
1831 dw_mci_stop_dma(host);
1833 !(host->data_status & (SDMMC_INT_DRTO |
1835 send_stop_abort(host, data);
1836 state = STATE_DATA_ERROR;
1839 prev_state = state = STATE_DATA_BUSY;
1843 case STATE_DATA_BUSY:
1844 if (!test_and_clear_bit(EVENT_DATA_COMPLETE,
1845 &host->pending_events)) {
1847 * If data error interrupt comes but data over
1848 * interrupt doesn't come within the given time.
1849 * in reading data state.
1851 if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
1852 (host->dir_status == DW_MCI_RECV_STATUS))
1853 dw_mci_set_drto(host);
1858 set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
1859 err = dw_mci_data_complete(host, data);
1862 if (!data->stop || mrq->sbc) {
1863 if (mrq->sbc && data->stop)
1864 data->stop->error = 0;
1865 dw_mci_request_end(host, mrq);
1869 /* stop command for open-ended transfer*/
1871 send_stop_abort(host, data);
1874 * If we don't have a command complete now we'll
1875 * never get one since we just reset everything;
1876 * better end the request.
1878 * If we do have a command complete we'll fall
1879 * through to the SENDING_STOP command and
1880 * everything will be peachy keen.
1882 if (!test_bit(EVENT_CMD_COMPLETE,
1883 &host->pending_events)) {
1885 dw_mci_request_end(host, mrq);
1891 * If err has non-zero,
1892 * stop-abort command has been already issued.
1894 prev_state = state = STATE_SENDING_STOP;
1898 case STATE_SENDING_STOP:
1899 if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
1900 &host->pending_events))
1903 /* CMD error in data command */
1904 if (mrq->cmd->error && mrq->data)
1911 dw_mci_command_complete(host, mrq->stop);
1913 host->cmd_status = 0;
1915 dw_mci_request_end(host, mrq);
1918 case STATE_DATA_ERROR:
1919 if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
1920 &host->pending_events))
1923 state = STATE_DATA_BUSY;
1926 } while (state != prev_state);
1928 host->state = state;
1930 spin_unlock(&host->lock);
1934 /* push final bytes to part_buf, only use during push */
1935 static void dw_mci_set_part_bytes(struct dw_mci *host, void *buf, int cnt)
1937 memcpy((void *)&host->part_buf, buf, cnt);
1938 host->part_buf_count = cnt;
1941 /* append bytes to part_buf, only use during push */
1942 static int dw_mci_push_part_bytes(struct dw_mci *host, void *buf, int cnt)
1944 cnt = min(cnt, (1 << host->data_shift) - host->part_buf_count);
1945 memcpy((void *)&host->part_buf + host->part_buf_count, buf, cnt);
1946 host->part_buf_count += cnt;
1950 /* pull first bytes from part_buf, only use during pull */
1951 static int dw_mci_pull_part_bytes(struct dw_mci *host, void *buf, int cnt)
1953 cnt = min_t(int, cnt, host->part_buf_count);
1955 memcpy(buf, (void *)&host->part_buf + host->part_buf_start,
1957 host->part_buf_count -= cnt;
1958 host->part_buf_start += cnt;
1963 /* pull final bytes from the part_buf, assuming it's just been filled */
1964 static void dw_mci_pull_final_bytes(struct dw_mci *host, void *buf, int cnt)
1966 memcpy(buf, &host->part_buf, cnt);
1967 host->part_buf_start = cnt;
1968 host->part_buf_count = (1 << host->data_shift) - cnt;
1971 static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt)
1973 struct mmc_data *data = host->data;
1976 /* try and push anything in the part_buf */
1977 if (unlikely(host->part_buf_count)) {
1978 int len = dw_mci_push_part_bytes(host, buf, cnt);
1982 if (host->part_buf_count == 2) {
1983 mci_fifo_writew(host->fifo_reg, host->part_buf16);
1984 host->part_buf_count = 0;
1987 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
1988 if (unlikely((unsigned long)buf & 0x1)) {
1990 u16 aligned_buf[64];
1991 int len = min(cnt & -2, (int)sizeof(aligned_buf));
1992 int items = len >> 1;
1994 /* memcpy from input buffer into aligned buffer */
1995 memcpy(aligned_buf, buf, len);
1998 /* push data from aligned buffer into fifo */
1999 for (i = 0; i < items; ++i)
2000 mci_fifo_writew(host->fifo_reg, aligned_buf[i]);
2007 for (; cnt >= 2; cnt -= 2)
2008 mci_fifo_writew(host->fifo_reg, *pdata++);
2011 /* put anything remaining in the part_buf */
2013 dw_mci_set_part_bytes(host, buf, cnt);
2014 /* Push data if we have reached the expected data length */
2015 if ((data->bytes_xfered + init_cnt) ==
2016 (data->blksz * data->blocks))
2017 mci_fifo_writew(host->fifo_reg, host->part_buf16);
2021 static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt)
2023 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2024 if (unlikely((unsigned long)buf & 0x1)) {
2026 /* pull data from fifo into aligned buffer */
2027 u16 aligned_buf[64];
2028 int len = min(cnt & -2, (int)sizeof(aligned_buf));
2029 int items = len >> 1;
2032 for (i = 0; i < items; ++i)
2033 aligned_buf[i] = mci_fifo_readw(host->fifo_reg);
2034 /* memcpy from aligned buffer into output buffer */
2035 memcpy(buf, aligned_buf, len);
2044 for (; cnt >= 2; cnt -= 2)
2045 *pdata++ = mci_fifo_readw(host->fifo_reg);
2049 host->part_buf16 = mci_fifo_readw(host->fifo_reg);
2050 dw_mci_pull_final_bytes(host, buf, cnt);
2054 static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt)
2056 struct mmc_data *data = host->data;
2059 /* try and push anything in the part_buf */
2060 if (unlikely(host->part_buf_count)) {
2061 int len = dw_mci_push_part_bytes(host, buf, cnt);
2065 if (host->part_buf_count == 4) {
2066 mci_fifo_writel(host->fifo_reg, host->part_buf32);
2067 host->part_buf_count = 0;
2070 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2071 if (unlikely((unsigned long)buf & 0x3)) {
2073 u32 aligned_buf[32];
2074 int len = min(cnt & -4, (int)sizeof(aligned_buf));
2075 int items = len >> 2;
2077 /* memcpy from input buffer into aligned buffer */
2078 memcpy(aligned_buf, buf, len);
2081 /* push data from aligned buffer into fifo */
2082 for (i = 0; i < items; ++i)
2083 mci_fifo_writel(host->fifo_reg, aligned_buf[i]);
2090 for (; cnt >= 4; cnt -= 4)
2091 mci_fifo_writel(host->fifo_reg, *pdata++);
2094 /* put anything remaining in the part_buf */
2096 dw_mci_set_part_bytes(host, buf, cnt);
2097 /* Push data if we have reached the expected data length */
2098 if ((data->bytes_xfered + init_cnt) ==
2099 (data->blksz * data->blocks))
2100 mci_fifo_writel(host->fifo_reg, host->part_buf32);
2104 static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt)
2106 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2107 if (unlikely((unsigned long)buf & 0x3)) {
2109 /* pull data from fifo into aligned buffer */
2110 u32 aligned_buf[32];
2111 int len = min(cnt & -4, (int)sizeof(aligned_buf));
2112 int items = len >> 2;
2115 for (i = 0; i < items; ++i)
2116 aligned_buf[i] = mci_fifo_readl(host->fifo_reg);
2117 /* memcpy from aligned buffer into output buffer */
2118 memcpy(buf, aligned_buf, len);
2127 for (; cnt >= 4; cnt -= 4)
2128 *pdata++ = mci_fifo_readl(host->fifo_reg);
2132 host->part_buf32 = mci_fifo_readl(host->fifo_reg);
2133 dw_mci_pull_final_bytes(host, buf, cnt);
2137 static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt)
2139 struct mmc_data *data = host->data;
2142 /* try and push anything in the part_buf */
2143 if (unlikely(host->part_buf_count)) {
2144 int len = dw_mci_push_part_bytes(host, buf, cnt);
2149 if (host->part_buf_count == 8) {
2150 mci_fifo_writeq(host->fifo_reg, host->part_buf);
2151 host->part_buf_count = 0;
2154 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2155 if (unlikely((unsigned long)buf & 0x7)) {
2157 u64 aligned_buf[16];
2158 int len = min(cnt & -8, (int)sizeof(aligned_buf));
2159 int items = len >> 3;
2161 /* memcpy from input buffer into aligned buffer */
2162 memcpy(aligned_buf, buf, len);
2165 /* push data from aligned buffer into fifo */
2166 for (i = 0; i < items; ++i)
2167 mci_fifo_writeq(host->fifo_reg, aligned_buf[i]);
2174 for (; cnt >= 8; cnt -= 8)
2175 mci_fifo_writeq(host->fifo_reg, *pdata++);
2178 /* put anything remaining in the part_buf */
2180 dw_mci_set_part_bytes(host, buf, cnt);
2181 /* Push data if we have reached the expected data length */
2182 if ((data->bytes_xfered + init_cnt) ==
2183 (data->blksz * data->blocks))
2184 mci_fifo_writeq(host->fifo_reg, host->part_buf);
2188 static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt)
2190 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2191 if (unlikely((unsigned long)buf & 0x7)) {
2193 /* pull data from fifo into aligned buffer */
2194 u64 aligned_buf[16];
2195 int len = min(cnt & -8, (int)sizeof(aligned_buf));
2196 int items = len >> 3;
2199 for (i = 0; i < items; ++i)
2200 aligned_buf[i] = mci_fifo_readq(host->fifo_reg);
2202 /* memcpy from aligned buffer into output buffer */
2203 memcpy(buf, aligned_buf, len);
2212 for (; cnt >= 8; cnt -= 8)
2213 *pdata++ = mci_fifo_readq(host->fifo_reg);
2217 host->part_buf = mci_fifo_readq(host->fifo_reg);
2218 dw_mci_pull_final_bytes(host, buf, cnt);
2222 static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt)
2226 /* get remaining partial bytes */
2227 len = dw_mci_pull_part_bytes(host, buf, cnt);
2228 if (unlikely(len == cnt))
2233 /* get the rest of the data */
2234 host->pull_data(host, buf, cnt);
2237 static void dw_mci_read_data_pio(struct dw_mci *host, bool dto)
2239 struct sg_mapping_iter *sg_miter = &host->sg_miter;
2241 unsigned int offset;
2242 struct mmc_data *data = host->data;
2243 int shift = host->data_shift;
2246 unsigned int remain, fcnt;
2249 if (!sg_miter_next(sg_miter))
2252 host->sg = sg_miter->piter.sg;
2253 buf = sg_miter->addr;
2254 remain = sg_miter->length;
2258 fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
2259 << shift) + host->part_buf_count;
2260 len = min(remain, fcnt);
2263 dw_mci_pull_data(host, (void *)(buf + offset), len);
2264 data->bytes_xfered += len;
2269 sg_miter->consumed = offset;
2270 status = mci_readl(host, MINTSTS);
2271 mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
2272 /* if the RXDR is ready read again */
2273 } while ((status & SDMMC_INT_RXDR) ||
2274 (dto && SDMMC_GET_FCNT(mci_readl(host, STATUS))));
2277 if (!sg_miter_next(sg_miter))
2279 sg_miter->consumed = 0;
2281 sg_miter_stop(sg_miter);
2285 sg_miter_stop(sg_miter);
2287 smp_wmb(); /* drain writebuffer */
2288 set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
2291 static void dw_mci_write_data_pio(struct dw_mci *host)
2293 struct sg_mapping_iter *sg_miter = &host->sg_miter;
2295 unsigned int offset;
2296 struct mmc_data *data = host->data;
2297 int shift = host->data_shift;
2300 unsigned int fifo_depth = host->fifo_depth;
2301 unsigned int remain, fcnt;
2304 if (!sg_miter_next(sg_miter))
2307 host->sg = sg_miter->piter.sg;
2308 buf = sg_miter->addr;
2309 remain = sg_miter->length;
2313 fcnt = ((fifo_depth -
2314 SDMMC_GET_FCNT(mci_readl(host, STATUS)))
2315 << shift) - host->part_buf_count;
2316 len = min(remain, fcnt);
2319 host->push_data(host, (void *)(buf + offset), len);
2320 data->bytes_xfered += len;
2325 sg_miter->consumed = offset;
2326 status = mci_readl(host, MINTSTS);
2327 mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
2328 } while (status & SDMMC_INT_TXDR); /* if TXDR write again */
2331 if (!sg_miter_next(sg_miter))
2333 sg_miter->consumed = 0;
2335 sg_miter_stop(sg_miter);
2339 sg_miter_stop(sg_miter);
2341 smp_wmb(); /* drain writebuffer */
2342 set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
2345 static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
2347 if (!host->cmd_status)
2348 host->cmd_status = status;
2350 smp_wmb(); /* drain writebuffer */
2352 set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
2353 tasklet_schedule(&host->tasklet);
2356 static void dw_mci_handle_cd(struct dw_mci *host)
2360 for (i = 0; i < host->num_slots; i++) {
2361 struct dw_mci_slot *slot = host->slot[i];
2366 if (slot->mmc->ops->card_event)
2367 slot->mmc->ops->card_event(slot->mmc);
2368 mmc_detect_change(slot->mmc,
2369 msecs_to_jiffies(host->pdata->detect_delay_ms));
2373 static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
2375 struct dw_mci *host = dev_id;
2379 pending = mci_readl(host, MINTSTS); /* read-only mask reg */
2382 * DTO fix - version 2.10a and below, and only if internal DMA
2385 if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) {
2387 ((mci_readl(host, STATUS) >> 17) & 0x1fff))
2388 pending |= SDMMC_INT_DATA_OVER;
2392 /* Check volt switch first, since it can look like an error */
2393 if ((host->state == STATE_SENDING_CMD11) &&
2394 (pending & SDMMC_INT_VOLT_SWITCH)) {
2395 unsigned long irqflags;
2397 mci_writel(host, RINTSTS, SDMMC_INT_VOLT_SWITCH);
2398 pending &= ~SDMMC_INT_VOLT_SWITCH;
2401 * Hold the lock; we know cmd11_timer can't be kicked
2402 * off after the lock is released, so safe to delete.
2404 spin_lock_irqsave(&host->irq_lock, irqflags);
2405 dw_mci_cmd_interrupt(host, pending);
2406 spin_unlock_irqrestore(&host->irq_lock, irqflags);
2408 del_timer(&host->cmd11_timer);
2411 if (pending & DW_MCI_CMD_ERROR_FLAGS) {
2412 mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
2413 host->cmd_status = pending;
2414 smp_wmb(); /* drain writebuffer */
2415 set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
2418 if (pending & DW_MCI_DATA_ERROR_FLAGS) {
2419 /* if there is an error report DATA_ERROR */
2420 mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
2421 host->data_status = pending;
2422 smp_wmb(); /* drain writebuffer */
2423 set_bit(EVENT_DATA_ERROR, &host->pending_events);
2424 tasklet_schedule(&host->tasklet);
2427 if (pending & SDMMC_INT_DATA_OVER) {
2428 if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
2429 del_timer(&host->dto_timer);
2431 mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
2432 if (!host->data_status)
2433 host->data_status = pending;
2434 smp_wmb(); /* drain writebuffer */
2435 if (host->dir_status == DW_MCI_RECV_STATUS) {
2436 if (host->sg != NULL)
2437 dw_mci_read_data_pio(host, true);
2439 set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
2440 tasklet_schedule(&host->tasklet);
2443 if (pending & SDMMC_INT_RXDR) {
2444 mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
2445 if (host->dir_status == DW_MCI_RECV_STATUS && host->sg)
2446 dw_mci_read_data_pio(host, false);
2449 if (pending & SDMMC_INT_TXDR) {
2450 mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
2451 if (host->dir_status == DW_MCI_SEND_STATUS && host->sg)
2452 dw_mci_write_data_pio(host);
2455 if (pending & SDMMC_INT_CMD_DONE) {
2456 mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
2457 dw_mci_cmd_interrupt(host, pending);
2460 if (pending & SDMMC_INT_CD) {
2461 mci_writel(host, RINTSTS, SDMMC_INT_CD);
2462 dw_mci_handle_cd(host);
2465 /* Handle SDIO Interrupts */
2466 for (i = 0; i < host->num_slots; i++) {
2467 struct dw_mci_slot *slot = host->slot[i];
2472 if (pending & SDMMC_INT_SDIO(slot->sdio_id)) {
2473 mci_writel(host, RINTSTS,
2474 SDMMC_INT_SDIO(slot->sdio_id));
2475 mmc_signal_sdio_irq(slot->mmc);
2481 if (host->use_dma != TRANS_MODE_IDMAC)
2484 /* Handle IDMA interrupts */
2485 if (host->dma_64bit_address == 1) {
2486 pending = mci_readl(host, IDSTS64);
2487 if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
2488 mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
2489 SDMMC_IDMAC_INT_RI);
2490 mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
2491 host->dma_ops->complete((void *)host);
2494 pending = mci_readl(host, IDSTS);
2495 if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
2496 mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
2497 SDMMC_IDMAC_INT_RI);
2498 mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
2499 host->dma_ops->complete((void *)host);
2507 /* given a slot, find out the device node representing that slot */
2508 static struct device_node *dw_mci_of_find_slot_node(struct dw_mci_slot *slot)
2510 struct device *dev = slot->mmc->parent;
2511 struct device_node *np;
2515 if (!dev || !dev->of_node)
2518 for_each_child_of_node(dev->of_node, np) {
2519 addr = of_get_property(np, "reg", &len);
2520 if (!addr || (len < sizeof(int)))
2522 if (be32_to_cpup(addr) == slot->id)
2528 static void dw_mci_slot_of_parse(struct dw_mci_slot *slot)
2530 struct device_node *np = dw_mci_of_find_slot_node(slot);
2535 if (of_property_read_bool(np, "disable-wp")) {
2536 slot->mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
2537 dev_warn(slot->mmc->parent,
2538 "Slot quirk 'disable-wp' is deprecated\n");
2541 #else /* CONFIG_OF */
2542 static void dw_mci_slot_of_parse(struct dw_mci_slot *slot)
2545 #endif /* CONFIG_OF */
2547 static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
2549 struct mmc_host *mmc;
2550 struct dw_mci_slot *slot;
2551 const struct dw_mci_drv_data *drv_data = host->drv_data;
2555 mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
2559 slot = mmc_priv(mmc);
2561 slot->sdio_id = host->sdio_id0 + id;
2564 host->slot[id] = slot;
2566 mmc->ops = &dw_mci_ops;
2567 if (of_property_read_u32_array(host->dev->of_node,
2568 "clock-freq-min-max", freq, 2)) {
2569 mmc->f_min = DW_MCI_FREQ_MIN;
2570 mmc->f_max = DW_MCI_FREQ_MAX;
2572 mmc->f_min = freq[0];
2573 mmc->f_max = freq[1];
2576 /*if there are external regulators, get them*/
2577 ret = mmc_regulator_get_supply(mmc);
2578 if (ret == -EPROBE_DEFER)
2579 goto err_host_allocated;
2581 if (!mmc->ocr_avail)
2582 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
2584 if (host->pdata->caps)
2585 mmc->caps = host->pdata->caps;
2587 if (host->pdata->pm_caps)
2588 mmc->pm_caps = host->pdata->pm_caps;
2590 if (host->dev->of_node) {
2591 ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
2595 ctrl_id = to_platform_device(host->dev)->id;
2597 if (drv_data && drv_data->caps)
2598 mmc->caps |= drv_data->caps[ctrl_id];
2600 if (host->pdata->caps2)
2601 mmc->caps2 = host->pdata->caps2;
2603 dw_mci_slot_of_parse(slot);
2605 ret = mmc_of_parse(mmc);
2607 goto err_host_allocated;
2609 /* Useful defaults if platform data is unset. */
2610 if (host->use_dma == TRANS_MODE_IDMAC) {
2611 mmc->max_segs = host->ring_size;
2612 mmc->max_blk_size = 65536;
2613 mmc->max_seg_size = 0x1000;
2614 mmc->max_req_size = mmc->max_seg_size * host->ring_size;
2615 mmc->max_blk_count = mmc->max_req_size / 512;
2616 } else if (host->use_dma == TRANS_MODE_EDMAC) {
2618 mmc->max_blk_size = 65536;
2619 mmc->max_blk_count = 65535;
2621 mmc->max_blk_size * mmc->max_blk_count;
2622 mmc->max_seg_size = mmc->max_req_size;
2624 /* TRANS_MODE_PIO */
2626 mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
2627 mmc->max_blk_count = 512;
2628 mmc->max_req_size = mmc->max_blk_size *
2630 mmc->max_seg_size = mmc->max_req_size;
2633 if (dw_mci_get_cd(mmc))
2634 set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
2636 clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
2638 ret = mmc_add_host(mmc);
2640 goto err_host_allocated;
2642 #if defined(CONFIG_DEBUG_FS)
2643 dw_mci_init_debugfs(slot);
2653 static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
2655 /* Debugfs stuff is cleaned up by mmc core */
2656 mmc_remove_host(slot->mmc);
2657 slot->host->slot[id] = NULL;
2658 mmc_free_host(slot->mmc);
2661 static void dw_mci_init_dma(struct dw_mci *host)
2664 struct device *dev = host->dev;
2665 struct device_node *np = dev->of_node;
2668 * Check tansfer mode from HCON[17:16]
2669 * Clear the ambiguous description of dw_mmc databook:
2670 * 2b'00: No DMA Interface -> Actually means using Internal DMA block
2671 * 2b'01: DesignWare DMA Interface -> Synopsys DW-DMA block
2672 * 2b'10: Generic DMA Interface -> non-Synopsys generic DMA block
2673 * 2b'11: Non DW DMA Interface -> pio only
2674 * Compared to DesignWare DMA Interface, Generic DMA Interface has a
2675 * simpler request/acknowledge handshake mechanism and both of them
2676 * are regarded as external dma master for dw_mmc.
2678 host->use_dma = SDMMC_GET_TRANS_MODE(mci_readl(host, HCON));
2679 if (host->use_dma == DMA_INTERFACE_IDMA) {
2680 host->use_dma = TRANS_MODE_IDMAC;
2681 } else if (host->use_dma == DMA_INTERFACE_DWDMA ||
2682 host->use_dma == DMA_INTERFACE_GDMA) {
2683 host->use_dma = TRANS_MODE_EDMAC;
2688 /* Determine which DMA interface to use */
2689 if (host->use_dma == TRANS_MODE_IDMAC) {
2691 * Check ADDR_CONFIG bit in HCON to find
2692 * IDMAC address bus width
2694 addr_config = SDMMC_GET_ADDR_CONFIG(mci_readl(host, HCON));
2696 if (addr_config == 1) {
2697 /* host supports IDMAC in 64-bit address mode */
2698 host->dma_64bit_address = 1;
2700 "IDMAC supports 64-bit address mode.\n");
2701 if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
2702 dma_set_coherent_mask(host->dev,
2705 /* host supports IDMAC in 32-bit address mode */
2706 host->dma_64bit_address = 0;
2708 "IDMAC supports 32-bit address mode.\n");
2711 /* Alloc memory for sg translation */
2712 host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
2713 &host->sg_dma, GFP_KERNEL);
2714 if (!host->sg_cpu) {
2716 "%s: could not alloc DMA memory\n",
2721 host->dma_ops = &dw_mci_idmac_ops;
2722 dev_info(host->dev, "Using internal DMA controller.\n");
2724 /* TRANS_MODE_EDMAC: check dma bindings again */
2725 if ((of_property_count_strings(np, "dma-names") < 0) ||
2726 (!of_find_property(np, "dmas", NULL))) {
2729 host->dma_ops = &dw_mci_edmac_ops;
2730 dev_info(host->dev, "Using external DMA controller.\n");
2733 if (host->dma_ops->init && host->dma_ops->start &&
2734 host->dma_ops->stop && host->dma_ops->cleanup) {
2735 if (host->dma_ops->init(host)) {
2736 dev_err(host->dev, "%s: Unable to initialize DMA Controller.\n",
2741 dev_err(host->dev, "DMA initialization not found.\n");
2748 dev_info(host->dev, "Using PIO mode.\n");
2749 host->use_dma = TRANS_MODE_PIO;
2752 static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
2754 unsigned long timeout = jiffies + msecs_to_jiffies(500);
2757 ctrl = mci_readl(host, CTRL);
2759 mci_writel(host, CTRL, ctrl);
2761 /* wait till resets clear */
2763 ctrl = mci_readl(host, CTRL);
2764 if (!(ctrl & reset))
2766 } while (time_before(jiffies, timeout));
2769 "Timeout resetting block (ctrl reset %#x)\n",
2775 static bool dw_mci_reset(struct dw_mci *host)
2777 u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
2781 * Reseting generates a block interrupt, hence setting
2782 * the scatter-gather pointer to NULL.
2785 sg_miter_stop(&host->sg_miter);
2790 flags |= SDMMC_CTRL_DMA_RESET;
2792 if (dw_mci_ctrl_reset(host, flags)) {
2794 * In all cases we clear the RAWINTS register to clear any
2797 mci_writel(host, RINTSTS, 0xFFFFFFFF);
2799 /* if using dma we wait for dma_req to clear */
2800 if (host->use_dma) {
2801 unsigned long timeout = jiffies + msecs_to_jiffies(500);
2805 status = mci_readl(host, STATUS);
2806 if (!(status & SDMMC_STATUS_DMA_REQ))
2809 } while (time_before(jiffies, timeout));
2811 if (status & SDMMC_STATUS_DMA_REQ) {
2813 "%s: Timeout waiting for dma_req to clear during reset\n",
2818 /* when using DMA next we reset the fifo again */
2819 if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET))
2823 /* if the controller reset bit did clear, then set clock regs */
2824 if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET)) {
2826 "%s: fifo/dma reset bits didn't clear but ciu was reset, doing clock update\n",
2832 if (host->use_dma == TRANS_MODE_IDMAC)
2833 /* It is also recommended that we reset and reprogram idmac */
2834 dw_mci_idmac_reset(host);
2839 /* After a CTRL reset we need to have CIU set clock registers */
2840 mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0);
2845 static void dw_mci_cmd11_timer(unsigned long arg)
2847 struct dw_mci *host = (struct dw_mci *)arg;
2849 if (host->state != STATE_SENDING_CMD11) {
2850 dev_warn(host->dev, "Unexpected CMD11 timeout\n");
2854 host->cmd_status = SDMMC_INT_RTO;
2855 set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
2856 tasklet_schedule(&host->tasklet);
2859 static void dw_mci_dto_timer(unsigned long arg)
2861 struct dw_mci *host = (struct dw_mci *)arg;
2863 switch (host->state) {
2864 case STATE_SENDING_DATA:
2865 case STATE_DATA_BUSY:
2867 * If DTO interrupt does NOT come in sending data state,
2868 * we should notify the driver to terminate current transfer
2869 * and report a data timeout to the core.
2871 host->data_status = SDMMC_INT_DRTO;
2872 set_bit(EVENT_DATA_ERROR, &host->pending_events);
2873 set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
2874 tasklet_schedule(&host->tasklet);
2882 static struct dw_mci_of_quirks {
2887 .quirk = "broken-cd",
2888 .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
2892 static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
2894 struct dw_mci_board *pdata;
2895 struct device *dev = host->dev;
2896 struct device_node *np = dev->of_node;
2897 const struct dw_mci_drv_data *drv_data = host->drv_data;
2899 u32 clock_frequency;
2901 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
2903 return ERR_PTR(-ENOMEM);
2905 /* find out number of slots supported */
2906 if (of_property_read_u32(dev->of_node, "num-slots",
2907 &pdata->num_slots)) {
2909 "num-slots property not found, assuming 1 slot is available\n");
2910 pdata->num_slots = 1;
2914 for (idx = 0; idx < ARRAY_SIZE(of_quirks); idx++)
2915 if (of_get_property(np, of_quirks[idx].quirk, NULL))
2916 pdata->quirks |= of_quirks[idx].id;
2918 if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
2920 "fifo-depth property not found, using value of FIFOTH register as default\n");
2922 of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
2924 if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
2925 pdata->bus_hz = clock_frequency;
2927 if (drv_data && drv_data->parse_dt) {
2928 ret = drv_data->parse_dt(host);
2930 return ERR_PTR(ret);
2933 if (of_find_property(np, "supports-highspeed", NULL)) {
2934 dev_info(dev, "supports-highspeed property is deprecated.\n");
2935 pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
2941 #else /* CONFIG_OF */
2942 static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
2944 return ERR_PTR(-EINVAL);
2946 #endif /* CONFIG_OF */
2948 static void dw_mci_enable_cd(struct dw_mci *host)
2950 struct dw_mci_board *brd = host->pdata;
2951 unsigned long irqflags;
2955 /* No need for CD if broken card detection */
2956 if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
2959 /* No need for CD if all slots have a non-error GPIO */
2960 for (i = 0; i < host->num_slots; i++) {
2961 struct dw_mci_slot *slot = host->slot[i];
2963 if (IS_ERR_VALUE(mmc_gpio_get_cd(slot->mmc)))
2966 if (i == host->num_slots)
2969 spin_lock_irqsave(&host->irq_lock, irqflags);
2970 temp = mci_readl(host, INTMASK);
2971 temp |= SDMMC_INT_CD;
2972 mci_writel(host, INTMASK, temp);
2973 spin_unlock_irqrestore(&host->irq_lock, irqflags);
2976 int dw_mci_probe(struct dw_mci *host)
2978 const struct dw_mci_drv_data *drv_data = host->drv_data;
2979 int width, i, ret = 0;
2984 host->pdata = dw_mci_parse_dt(host);
2985 if (IS_ERR(host->pdata)) {
2986 dev_err(host->dev, "platform data not available\n");
2991 if (host->pdata->num_slots < 1) {
2993 "Platform data must supply num_slots.\n");
2997 host->biu_clk = devm_clk_get(host->dev, "biu");
2998 if (IS_ERR(host->biu_clk)) {
2999 dev_dbg(host->dev, "biu clock not available\n");
3001 ret = clk_prepare_enable(host->biu_clk);
3003 dev_err(host->dev, "failed to enable biu clock\n");
3008 host->ciu_clk = devm_clk_get(host->dev, "ciu");
3009 if (IS_ERR(host->ciu_clk)) {
3010 dev_dbg(host->dev, "ciu clock not available\n");
3011 host->bus_hz = host->pdata->bus_hz;
3013 ret = clk_prepare_enable(host->ciu_clk);
3015 dev_err(host->dev, "failed to enable ciu clock\n");
3019 if (host->pdata->bus_hz) {
3020 ret = clk_set_rate(host->ciu_clk, host->pdata->bus_hz);
3023 "Unable to set bus rate to %uHz\n",
3024 host->pdata->bus_hz);
3026 host->bus_hz = clk_get_rate(host->ciu_clk);
3029 if (!host->bus_hz) {
3031 "Platform data must supply bus speed\n");
3036 if (drv_data && drv_data->init) {
3037 ret = drv_data->init(host);
3040 "implementation specific init failed\n");
3045 if (drv_data && drv_data->setup_clock) {
3046 ret = drv_data->setup_clock(host);
3049 "implementation specific clock setup failed\n");
3054 setup_timer(&host->cmd11_timer,
3055 dw_mci_cmd11_timer, (unsigned long)host);
3057 host->quirks = host->pdata->quirks;
3059 if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
3060 setup_timer(&host->dto_timer,
3061 dw_mci_dto_timer, (unsigned long)host);
3063 spin_lock_init(&host->lock);
3064 spin_lock_init(&host->irq_lock);
3065 INIT_LIST_HEAD(&host->queue);
3068 * Get the host data width - this assumes that HCON has been set with
3069 * the correct values.
3071 i = SDMMC_GET_HDATA_WIDTH(mci_readl(host, HCON));
3073 host->push_data = dw_mci_push_data16;
3074 host->pull_data = dw_mci_pull_data16;
3076 host->data_shift = 1;
3077 } else if (i == 2) {
3078 host->push_data = dw_mci_push_data64;
3079 host->pull_data = dw_mci_pull_data64;
3081 host->data_shift = 3;
3083 /* Check for a reserved value, and warn if it is */
3085 "HCON reports a reserved host data width!\n"
3086 "Defaulting to 32-bit access.\n");
3087 host->push_data = dw_mci_push_data32;
3088 host->pull_data = dw_mci_pull_data32;
3090 host->data_shift = 2;
3093 /* Reset all blocks */
3094 if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS))
3097 host->dma_ops = host->pdata->dma_ops;
3098 dw_mci_init_dma(host);
3100 /* Clear the interrupts for the host controller */
3101 mci_writel(host, RINTSTS, 0xFFFFFFFF);
3102 mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
3104 /* Put in max timeout */
3105 mci_writel(host, TMOUT, 0xFFFFFFFF);
3108 * FIFO threshold settings RxMark = fifo_size / 2 - 1,
3109 * Tx Mark = fifo_size / 2 DMA Size = 8
3111 if (!host->pdata->fifo_depth) {
3113 * Power-on value of RX_WMark is FIFO_DEPTH-1, but this may
3114 * have been overwritten by the bootloader, just like we're
3115 * about to do, so if you know the value for your hardware, you
3116 * should put it in the platform data.
3118 fifo_size = mci_readl(host, FIFOTH);
3119 fifo_size = 1 + ((fifo_size >> 16) & 0xfff);
3121 fifo_size = host->pdata->fifo_depth;
3123 host->fifo_depth = fifo_size;
3125 SDMMC_SET_FIFOTH(0x2, fifo_size / 2 - 1, fifo_size / 2);
3126 mci_writel(host, FIFOTH, host->fifoth_val);
3128 /* disable clock to CIU */
3129 mci_writel(host, CLKENA, 0);
3130 mci_writel(host, CLKSRC, 0);
3133 * In 2.40a spec, Data offset is changed.
3134 * Need to check the version-id and set data-offset for DATA register.
3136 host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
3137 dev_info(host->dev, "Version ID is %04x\n", host->verid);
3139 if (host->verid < DW_MMC_240A)
3140 host->fifo_reg = host->regs + DATA_OFFSET;
3142 host->fifo_reg = host->regs + DATA_240A_OFFSET;
3144 tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
3145 ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
3146 host->irq_flags, "dw-mci", host);
3150 if (host->pdata->num_slots)
3151 host->num_slots = host->pdata->num_slots;
3153 host->num_slots = SDMMC_GET_SLOT_NUM(mci_readl(host, HCON));
3156 * Enable interrupts for command done, data over, data empty,
3157 * receive ready and error such as transmit, receive timeout, crc error
3159 mci_writel(host, RINTSTS, 0xFFFFFFFF);
3160 mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
3161 SDMMC_INT_TXDR | SDMMC_INT_RXDR |
3162 DW_MCI_ERROR_FLAGS);
3163 /* Enable mci interrupt */
3164 mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
3167 "DW MMC controller at irq %d,%d bit host data width,%u deep fifo\n",
3168 host->irq, width, fifo_size);
3170 /* We need at least one slot to succeed */
3171 for (i = 0; i < host->num_slots; i++) {
3172 ret = dw_mci_init_slot(host, i);
3174 dev_dbg(host->dev, "slot %d init failed\n", i);
3180 dev_info(host->dev, "%d slots initialized\n", init_slots);
3183 "attempted to initialize %d slots, but failed on all\n",
3188 /* Now that slots are all setup, we can enable card detect */
3189 dw_mci_enable_cd(host);
3191 if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
3192 dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
3197 if (host->use_dma && host->dma_ops->exit)
3198 host->dma_ops->exit(host);
3201 if (!IS_ERR(host->ciu_clk))
3202 clk_disable_unprepare(host->ciu_clk);
3205 if (!IS_ERR(host->biu_clk))
3206 clk_disable_unprepare(host->biu_clk);
3210 EXPORT_SYMBOL(dw_mci_probe);
3212 void dw_mci_remove(struct dw_mci *host)
3216 for (i = 0; i < host->num_slots; i++) {
3217 dev_dbg(host->dev, "remove slot %d\n", i);
3219 dw_mci_cleanup_slot(host->slot[i], i);
3222 mci_writel(host, RINTSTS, 0xFFFFFFFF);
3223 mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
3225 /* disable clock to CIU */
3226 mci_writel(host, CLKENA, 0);
3227 mci_writel(host, CLKSRC, 0);
3229 if (host->use_dma && host->dma_ops->exit)
3230 host->dma_ops->exit(host);
3232 if (!IS_ERR(host->ciu_clk))
3233 clk_disable_unprepare(host->ciu_clk);
3235 if (!IS_ERR(host->biu_clk))
3236 clk_disable_unprepare(host->biu_clk);
3238 EXPORT_SYMBOL(dw_mci_remove);
3242 #ifdef CONFIG_PM_SLEEP
3244 * TODO: we should probably disable the clock to the card in the suspend path.
3246 int dw_mci_suspend(struct dw_mci *host)
3248 if (host->use_dma && host->dma_ops->exit)
3249 host->dma_ops->exit(host);
3253 EXPORT_SYMBOL(dw_mci_suspend);
3255 int dw_mci_resume(struct dw_mci *host)
3259 if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
3264 if (host->use_dma && host->dma_ops->init)
3265 host->dma_ops->init(host);
3268 * Restore the initial value at FIFOTH register
3269 * And Invalidate the prev_blksz with zero
3271 mci_writel(host, FIFOTH, host->fifoth_val);
3272 host->prev_blksz = 0;
3274 /* Put in max timeout */
3275 mci_writel(host, TMOUT, 0xFFFFFFFF);
3277 mci_writel(host, RINTSTS, 0xFFFFFFFF);
3278 mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
3279 SDMMC_INT_TXDR | SDMMC_INT_RXDR |
3280 DW_MCI_ERROR_FLAGS);
3281 mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
3283 for (i = 0; i < host->num_slots; i++) {
3284 struct dw_mci_slot *slot = host->slot[i];
3288 if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
3289 dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
3290 dw_mci_setup_bus(slot, true);
3294 /* Now that slots are all setup, we can enable card detect */
3295 dw_mci_enable_cd(host);
3299 EXPORT_SYMBOL(dw_mci_resume);
3300 #endif /* CONFIG_PM_SLEEP */
3302 static int __init dw_mci_init(void)
3304 pr_info("Synopsys Designware Multimedia Card Interface Driver\n");
3308 static void __exit dw_mci_exit(void)
3312 module_init(dw_mci_init);
3313 module_exit(dw_mci_exit);
3315 MODULE_DESCRIPTION("DW Multimedia Card Interface driver");
3316 MODULE_AUTHOR("NXP Semiconductor VietNam");
3317 MODULE_AUTHOR("Imagination Technologies Ltd");
3318 MODULE_LICENSE("GPL v2");