drivers/media/video/tm6000/tm6000-cards.c

   1 /*
   2  *  tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices
   3  *
   4  *  Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation version 2
   9  *
  10  *  This program is distributed in the hope that it will be useful,
  11  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  *  GNU General Public License for more details.
  14  *
  15  *  You should have received a copy of the GNU General Public License
  16  *  along with this program; if not, write to the Free Software
  17  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18  */
  19
  20 #include <linux/init.h>
  21 #include <linux/module.h>
  22 #include <linux/pci.h>
  23 #include <linux/delay.h>
  24 #include <linux/i2c.h>
  25 #include <linux/usb.h>
  26 #include <linux/slab.h>
  27 #include <media/v4l2-common.h>
  28 #include <media/tuner.h>
  29 #include <media/tvaudio.h>
  30 #include <media/i2c-addr.h>
  31 #include <media/rc-map.h>
  32
  33 #include "tm6000.h"
  34 #include "tm6000-regs.h"
  35 #include "tuner-xc2028.h"
  36 #include "xc5000.h"
  37
  38 #define TM6000_BOARD_UNKNOWN                    0
  39 #define TM5600_BOARD_GENERIC                    1
  40 #define TM6000_BOARD_GENERIC                    2
  41 #define TM6010_BOARD_GENERIC                    3
  42 #define TM5600_BOARD_10MOONS_UT821              4
  43 #define TM5600_BOARD_10MOONS_UT330              5
  44 #define TM6000_BOARD_ADSTECH_DUAL_TV            6
  45 #define TM6000_BOARD_FREECOM_AND_SIMILAR        7
  46 #define TM6000_BOARD_ADSTECH_MINI_DUAL_TV       8
  47 #define TM6010_BOARD_HAUPPAUGE_900H             9
  48 #define TM6010_BOARD_BEHOLD_WANDER              10
  49 #define TM6010_BOARD_BEHOLD_VOYAGER             11
  50 #define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
  51 #define TM6010_BOARD_TWINHAN_TU501              13
  52 #define TM6010_BOARD_BEHOLD_WANDER_LITE         14
  53 #define TM6010_BOARD_BEHOLD_VOYAGER_LITE        15
  54 #define TM5600_BOARD_TERRATEC_GRABSTER          16
  55
  56 #define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \
  57                            (model == TM5600_BOARD_GENERIC) || \
  58                            (model == TM6000_BOARD_GENERIC) || \
  59                            (model == TM6010_BOARD_GENERIC))
  60
  61 #define TM6000_MAXBOARDS        16
  62 static unsigned int card[]     = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
  63
  64 module_param_array(card,  int, NULL, 0444);
  65
  66 static unsigned long tm6000_devused;
  67
  68
  69 struct tm6000_board {
  70         char            *name;
  71         char            eename[16];             /* EEPROM name */
  72         unsigned        eename_size;            /* size of EEPROM name */
  73         unsigned        eename_pos;             /* Position where it appears at ROM */
  74
  75         struct tm6000_capabilities caps;
  76
  77         enum            tm6000_devtype type;    /* variant of the chipset */
  78         int             tuner_type;     /* type of the tuner */
  79         int             tuner_addr;     /* tuner address */
  80         int             demod_addr;     /* demodulator address */
  81
  82         struct tm6000_gpio gpio;
  83
  84         struct tm6000_input     vinput[3];
  85         struct tm6000_input     rinput;
  86
  87         char            *ir_codes;
  88 };
  89
  90 static struct tm6000_board tm6000_boards[] = {
  91         [TM6000_BOARD_UNKNOWN] = {
  92                 .name         = "Unknown tm6000 video grabber",
  93                 .caps = {
  94                         .has_tuner      = 1,
  95                         .has_eeprom     = 1,
  96                 },
  97                 .gpio = {
  98                         .tuner_reset    = TM6000_GPIO_1,
  99                 },
 100                 .vinput = { {
 101                         .type   = TM6000_INPUT_TV,
 102                         .vmux   = TM6000_VMUX_VIDEO_B,
 103                         .amux   = TM6000_AMUX_ADC1,
 104                         }, {
 105                         .type   = TM6000_INPUT_COMPOSITE1,
 106                         .vmux   = TM6000_VMUX_VIDEO_A,
 107                         .amux   = TM6000_AMUX_ADC2,
 108                         }, {
 109                         .type   = TM6000_INPUT_SVIDEO,
 110                         .vmux   = TM6000_VMUX_VIDEO_AB,
 111                         .amux   = TM6000_AMUX_ADC2,
 112                         },
 113                 },
 114         },
 115         [TM5600_BOARD_GENERIC] = {
 116                 .name         = "Generic tm5600 board",
 117                 .type         = TM5600,
 118                 .tuner_type   = TUNER_XC2028,
 119                 .tuner_addr   = 0xc2 >> 1,
 120                 .caps = {
 121                         .has_tuner      = 1,
 122                         .has_eeprom     = 1,
 123                 },
 124                 .gpio = {
 125                         .tuner_reset    = TM6000_GPIO_1,
 126                 },
 127                 .vinput = { {
 128                         .type   = TM6000_INPUT_TV,
 129                         .vmux   = TM6000_VMUX_VIDEO_B,
 130                         .amux   = TM6000_AMUX_ADC1,
 131                         }, {
 132                         .type   = TM6000_INPUT_COMPOSITE1,
 133                         .vmux   = TM6000_VMUX_VIDEO_A,
 134                         .amux   = TM6000_AMUX_ADC2,
 135                         }, {
 136                         .type   = TM6000_INPUT_SVIDEO,
 137                         .vmux   = TM6000_VMUX_VIDEO_AB,
 138                         .amux   = TM6000_AMUX_ADC2,
 139                         },
 140                 },
 141         },
 142         [TM6000_BOARD_GENERIC] = {
 143                 .name         = "Generic tm6000 board",
 144                 .tuner_type   = TUNER_XC2028,
 145                 .tuner_addr   = 0xc2 >> 1,
 146                 .caps = {
 147                         .has_tuner      = 1,
 148                         .has_eeprom     = 1,
 149                 },
 150                 .gpio = {
 151                         .tuner_reset    = TM6000_GPIO_1,
 152                 },
 153                 .vinput = { {
 154                         .type   = TM6000_INPUT_TV,
 155                         .vmux   = TM6000_VMUX_VIDEO_B,
 156                         .amux   = TM6000_AMUX_ADC1,
 157                         }, {
 158                         .type   = TM6000_INPUT_COMPOSITE1,
 159                         .vmux   = TM6000_VMUX_VIDEO_A,
 160                         .amux   = TM6000_AMUX_ADC2,
 161                         }, {
 162                         .type   = TM6000_INPUT_SVIDEO,
 163                         .vmux   = TM6000_VMUX_VIDEO_AB,
 164                         .amux   = TM6000_AMUX_ADC2,
 165                         },
 166                 },
 167         },
 168         [TM6010_BOARD_GENERIC] = {
 169                 .name         = "Generic tm6010 board",
 170                 .type         = TM6010,
 171                 .tuner_type   = TUNER_XC2028,
 172                 .tuner_addr   = 0xc2 >> 1,
 173                 .demod_addr   = 0x1e >> 1,
 174                 .caps = {
 175                         .has_tuner      = 1,
 176                         .has_dvb        = 1,
 177                         .has_zl10353    = 1,
 178                         .has_eeprom     = 1,
 179                         .has_remote     = 1,
 180                 },
 181                 .gpio = {
 182                         .tuner_reset    = TM6010_GPIO_2,
 183                         .tuner_on       = TM6010_GPIO_3,
 184                         .demod_reset    = TM6010_GPIO_1,
 185                         .demod_on       = TM6010_GPIO_4,
 186                         .power_led      = TM6010_GPIO_7,
 187                         .dvb_led        = TM6010_GPIO_5,
 188                         .ir             = TM6010_GPIO_0,
 189                 },
 190                 .vinput = { {
 191                         .type   = TM6000_INPUT_TV,
 192                         .vmux   = TM6000_VMUX_VIDEO_B,
 193                         .amux   = TM6000_AMUX_SIF1,
 194                         }, {
 195                         .type   = TM6000_INPUT_COMPOSITE1,
 196                         .vmux   = TM6000_VMUX_VIDEO_A,
 197                         .amux   = TM6000_AMUX_ADC2,
 198                         }, {
 199                         .type   = TM6000_INPUT_SVIDEO,
 200                         .vmux   = TM6000_VMUX_VIDEO_AB,
 201                         .amux   = TM6000_AMUX_ADC2,
 202                         },
 203                 },
 204         },
 205         [TM5600_BOARD_10MOONS_UT821] = {
 206                 .name         = "10Moons UT 821",
 207                 .tuner_type   = TUNER_XC2028,
 208                 .eename       = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b},
 209                 .eename_size  = 14,
 210                 .eename_pos   = 0x14,
 211                 .type         = TM5600,
 212                 .tuner_addr   = 0xc2 >> 1,
 213                 .caps = {
 214                         .has_tuner    = 1,
 215                         .has_eeprom   = 1,
 216                 },
 217                 .gpio = {
 218                         .tuner_reset    = TM6000_GPIO_1,
 219                 },
 220                 .vinput = { {
 221                         .type   = TM6000_INPUT_TV,
 222                         .vmux   = TM6000_VMUX_VIDEO_B,
 223                         .amux   = TM6000_AMUX_ADC1,
 224                         }, {
 225                         .type   = TM6000_INPUT_COMPOSITE1,
 226                         .vmux   = TM6000_VMUX_VIDEO_A,
 227                         .amux   = TM6000_AMUX_ADC2,
 228                         }, {
 229                         .type   = TM6000_INPUT_SVIDEO,
 230                         .vmux   = TM6000_VMUX_VIDEO_AB,
 231                         .amux   = TM6000_AMUX_ADC2,
 232                         },
 233                 },
 234         },
 235         [TM5600_BOARD_10MOONS_UT330] = {
 236                 .name         = "10Moons UT 330",
 237                 .tuner_type   = TUNER_PHILIPS_FQ1216AME_MK4,
 238                 .tuner_addr   = 0xc8 >> 1,
 239                 .caps = {
 240                         .has_tuner    = 1,
 241                         .has_dvb      = 0,
 242                         .has_zl10353  = 0,
 243                         .has_eeprom   = 1,
 244                 },
 245                 .vinput = { {
 246                         .type   = TM6000_INPUT_TV,
 247                         .vmux   = TM6000_VMUX_VIDEO_B,
 248                         .amux   = TM6000_AMUX_ADC1,
 249                         }, {
 250                         .type   = TM6000_INPUT_COMPOSITE1,
 251                         .vmux   = TM6000_VMUX_VIDEO_A,
 252                         .amux   = TM6000_AMUX_ADC2,
 253                         }, {
 254                         .type   = TM6000_INPUT_SVIDEO,
 255                         .vmux   = TM6000_VMUX_VIDEO_AB,
 256                         .amux   = TM6000_AMUX_ADC2,
 257                         },
 258                 },
 259         },
 260         [TM6000_BOARD_ADSTECH_DUAL_TV] = {
 261                 .name         = "ADSTECH Dual TV USB",
 262                 .tuner_type   = TUNER_XC2028,
 263                 .tuner_addr   = 0xc8 >> 1,
 264                 .caps = {
 265                         .has_tuner    = 1,
 266                         .has_tda9874  = 1,
 267                         .has_dvb      = 1,
 268                         .has_zl10353  = 1,
 269                         .has_eeprom   = 1,
 270                 },
 271                 .vinput = { {
 272                         .type   = TM6000_INPUT_TV,
 273                         .vmux   = TM6000_VMUX_VIDEO_B,
 274                         .amux   = TM6000_AMUX_ADC1,
 275                         }, {
 276                         .type   = TM6000_INPUT_COMPOSITE1,
 277                         .vmux   = TM6000_VMUX_VIDEO_A,
 278                         .amux   = TM6000_AMUX_ADC2,
 279                         }, {
 280                         .type   = TM6000_INPUT_SVIDEO,
 281                         .vmux   = TM6000_VMUX_VIDEO_AB,
 282                         .amux   = TM6000_AMUX_ADC2,
 283                         },
 284                 },
 285         },
 286         [TM6000_BOARD_FREECOM_AND_SIMILAR] = {
 287                 .name         = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
 288                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 289                 .tuner_addr   = 0xc2 >> 1,
 290                 .demod_addr   = 0x1e >> 1,
 291                 .caps = {
 292                         .has_tuner    = 1,
 293                         .has_dvb      = 1,
 294                         .has_zl10353  = 1,
 295                         .has_eeprom   = 0,
 296                         .has_remote   = 1,
 297                 },
 298                 .gpio = {
 299                         .tuner_reset    = TM6000_GPIO_4,
 300                 },
 301                 .vinput = { {
 302                         .type   = TM6000_INPUT_TV,
 303                         .vmux   = TM6000_VMUX_VIDEO_B,
 304                         .amux   = TM6000_AMUX_ADC1,
 305                         }, {
 306                         .type   = TM6000_INPUT_COMPOSITE1,
 307                         .vmux   = TM6000_VMUX_VIDEO_A,
 308                         .amux   = TM6000_AMUX_ADC2,
 309                         }, {
 310                         .type   = TM6000_INPUT_SVIDEO,
 311                         .vmux   = TM6000_VMUX_VIDEO_AB,
 312                         .amux   = TM6000_AMUX_ADC2,
 313                         },
 314                 },
 315         },
 316         [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
 317                 .name         = "ADSTECH Mini Dual TV USB",
 318                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 319                 .tuner_addr   = 0xc8 >> 1,
 320                 .demod_addr   = 0x1e >> 1,
 321                 .caps = {
 322                         .has_tuner    = 1,
 323                         .has_dvb      = 1,
 324                         .has_zl10353  = 1,
 325                         .has_eeprom   = 0,
 326                 },
 327                 .gpio = {
 328                         .tuner_reset    = TM6000_GPIO_4,
 329                 },
 330                 .vinput = { {
 331                         .type   = TM6000_INPUT_TV,
 332                         .vmux   = TM6000_VMUX_VIDEO_B,
 333                         .amux   = TM6000_AMUX_ADC1,
 334                         }, {
 335                         .type   = TM6000_INPUT_COMPOSITE1,
 336                         .vmux   = TM6000_VMUX_VIDEO_A,
 337                         .amux   = TM6000_AMUX_ADC2,
 338                         }, {
 339                         .type   = TM6000_INPUT_SVIDEO,
 340                         .vmux   = TM6000_VMUX_VIDEO_AB,
 341                         .amux   = TM6000_AMUX_ADC2,
 342                         },
 343                 },
 344         },
 345         [TM6010_BOARD_HAUPPAUGE_900H] = {
 346                 .name         = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
 347                 .eename       = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 },
 348                 .eename_size  = 14,
 349                 .eename_pos   = 0x42,
 350                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 351                 .tuner_addr   = 0xc2 >> 1,
 352                 .demod_addr   = 0x1e >> 1,
 353                 .type         = TM6010,
 354                 .caps = {
 355                         .has_tuner    = 1,
 356                         .has_dvb      = 1,
 357                         .has_zl10353  = 1,
 358                         .has_eeprom   = 1,
 359                         .has_remote   = 1,
 360                 },
 361                 .gpio = {
 362                         .tuner_reset    = TM6010_GPIO_2,
 363                         .tuner_on       = TM6010_GPIO_3,
 364                         .demod_reset    = TM6010_GPIO_1,
 365                         .demod_on       = TM6010_GPIO_4,
 366                         .power_led      = TM6010_GPIO_7,
 367                         .dvb_led        = TM6010_GPIO_5,
 368                         .ir             = TM6010_GPIO_0,
 369                 },
 370                 .vinput = { {
 371                         .type   = TM6000_INPUT_TV,
 372                         .vmux   = TM6000_VMUX_VIDEO_B,
 373                         .amux   = TM6000_AMUX_SIF1,
 374                         }, {
 375                         .type   = TM6000_INPUT_COMPOSITE1,
 376                         .vmux   = TM6000_VMUX_VIDEO_A,
 377                         .amux   = TM6000_AMUX_ADC2,
 378                         }, {
 379                         .type   = TM6000_INPUT_SVIDEO,
 380                         .vmux   = TM6000_VMUX_VIDEO_AB,
 381                         .amux   = TM6000_AMUX_ADC2,
 382                         },
 383                 },
 384         },
 385         [TM6010_BOARD_BEHOLD_WANDER] = {
 386                 .name         = "Beholder Wander DVB-T/TV/FM USB2.0",
 387                 .tuner_type   = TUNER_XC5000,
 388                 .tuner_addr   = 0xc2 >> 1,
 389                 .demod_addr   = 0x1e >> 1,
 390                 .type         = TM6010,
 391                 .caps = {
 392                         .has_tuner      = 1,
 393                         .has_dvb        = 1,
 394                         .has_zl10353    = 1,
 395                         .has_eeprom     = 1,
 396                         .has_remote     = 1,
 397                         .has_radio      = 1,
 398                 },
 399                 .gpio = {
 400                         .tuner_reset    = TM6010_GPIO_0,
 401                         .demod_reset    = TM6010_GPIO_1,
 402                         .power_led      = TM6010_GPIO_6,
 403                 },
 404                 .vinput = { {
 405                         .type   = TM6000_INPUT_TV,
 406                         .vmux   = TM6000_VMUX_VIDEO_B,
 407                         .amux   = TM6000_AMUX_SIF1,
 408                         }, {
 409                         .type   = TM6000_INPUT_COMPOSITE1,
 410                         .vmux   = TM6000_VMUX_VIDEO_A,
 411                         .amux   = TM6000_AMUX_ADC2,
 412                         }, {
 413                         .type   = TM6000_INPUT_SVIDEO,
 414                         .vmux   = TM6000_VMUX_VIDEO_AB,
 415                         .amux   = TM6000_AMUX_ADC2,
 416                         },
 417                 },
 418                 .rinput = {
 419                         .type   = TM6000_INPUT_RADIO,
 420                         .amux   = TM6000_AMUX_ADC1,
 421                 },
 422         },
 423         [TM6010_BOARD_BEHOLD_VOYAGER] = {
 424                 .name         = "Beholder Voyager TV/FM USB2.0",
 425                 .tuner_type   = TUNER_XC5000,
 426                 .tuner_addr   = 0xc2 >> 1,
 427                 .type         = TM6010,
 428                 .caps = {
 429                         .has_tuner      = 1,
 430                         .has_dvb        = 0,
 431                         .has_zl10353    = 0,
 432                         .has_eeprom     = 1,
 433                         .has_remote     = 1,
 434                         .has_radio      = 1,
 435                 },
 436                 .gpio = {
 437                         .tuner_reset    = TM6010_GPIO_0,
 438                         .power_led      = TM6010_GPIO_6,
 439                 },
 440                 .vinput = { {
 441                         .type   = TM6000_INPUT_TV,
 442                         .vmux   = TM6000_VMUX_VIDEO_B,
 443                         .amux   = TM6000_AMUX_SIF1,
 444                         }, {
 445                         .type   = TM6000_INPUT_COMPOSITE1,
 446                         .vmux   = TM6000_VMUX_VIDEO_A,
 447                         .amux   = TM6000_AMUX_ADC2,
 448                         }, {
 449                         .type   = TM6000_INPUT_SVIDEO,
 450                         .vmux   = TM6000_VMUX_VIDEO_AB,
 451                         .amux   = TM6000_AMUX_ADC2,
 452                         },
 453                 },
 454                 .rinput = {
 455                         .type   = TM6000_INPUT_RADIO,
 456                         .amux   = TM6000_AMUX_ADC1,
 457                 },
 458         },
 459         [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
 460                 .name         = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
 461                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 462                 .tuner_addr   = 0xc2 >> 1,
 463                 .demod_addr   = 0x1e >> 1,
 464                 .type         = TM6010,
 465                 .caps = {
 466                         .has_tuner    = 1,
 467                         .has_dvb      = 1,
 468                         .has_zl10353  = 1,
 469                         .has_eeprom   = 1,
 470                         .has_remote   = 1,
 471                         .has_radio    = 1,
 472                 },
 473                 .gpio = {
 474                         .tuner_reset    = TM6010_GPIO_2,
 475                         .tuner_on       = TM6010_GPIO_3,
 476                         .demod_reset    = TM6010_GPIO_1,
 477                         .demod_on       = TM6010_GPIO_4,
 478                         .power_led      = TM6010_GPIO_7,
 479                         .dvb_led        = TM6010_GPIO_5,
 480                         .ir             = TM6010_GPIO_0,
 481                 },
 482                 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
 483                 .vinput = { {
 484                         .type   = TM6000_INPUT_TV,
 485                         .vmux   = TM6000_VMUX_VIDEO_B,
 486                         .amux   = TM6000_AMUX_SIF1,
 487                         }, {
 488                         .type   = TM6000_INPUT_COMPOSITE1,
 489                         .vmux   = TM6000_VMUX_VIDEO_A,
 490                         .amux   = TM6000_AMUX_ADC2,
 491                         }, {
 492                         .type   = TM6000_INPUT_SVIDEO,
 493                         .vmux   = TM6000_VMUX_VIDEO_AB,
 494                         .amux   = TM6000_AMUX_ADC2,
 495                         },
 496                 },
 497                 .rinput = {
 498                         .type = TM6000_INPUT_RADIO,
 499                         .amux = TM6000_AMUX_SIF1,
 500                 },
 501         },
 502         [TM5600_BOARD_TERRATEC_GRABSTER] = {
 503                 .name         = "Terratec Grabster AV 150/250 MX",
 504                 .type         = TM5600,
 505                 .tuner_type   = TUNER_ABSENT,
 506                 .vinput = { {
 507                         .type   = TM6000_INPUT_TV,
 508                         .vmux   = TM6000_VMUX_VIDEO_B,
 509                         .amux   = TM6000_AMUX_ADC1,
 510                         }, {
 511                         .type   = TM6000_INPUT_COMPOSITE1,
 512                         .vmux   = TM6000_VMUX_VIDEO_A,
 513                         .amux   = TM6000_AMUX_ADC2,
 514                         }, {
 515                         .type   = TM6000_INPUT_SVIDEO,
 516                         .vmux   = TM6000_VMUX_VIDEO_AB,
 517                         .amux   = TM6000_AMUX_ADC2,
 518                         },
 519                 },
 520         },
 521         [TM6010_BOARD_TWINHAN_TU501] = {
 522                 .name         = "Twinhan TU501(704D1)",
 523                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 524                 .tuner_addr   = 0xc2 >> 1,
 525                 .demod_addr   = 0x1e >> 1,
 526                 .type         = TM6010,
 527                 .caps = {
 528                         .has_tuner    = 1,
 529                         .has_dvb      = 1,
 530                         .has_zl10353  = 1,
 531                         .has_eeprom   = 1,
 532                         .has_remote   = 1,
 533                 },
 534                 .gpio = {
 535                         .tuner_reset    = TM6010_GPIO_2,
 536                         .tuner_on       = TM6010_GPIO_3,
 537                         .demod_reset    = TM6010_GPIO_1,
 538                         .demod_on       = TM6010_GPIO_4,
 539                         .power_led      = TM6010_GPIO_7,
 540                         .dvb_led        = TM6010_GPIO_5,
 541                         .ir             = TM6010_GPIO_0,
 542                 },
 543                 .vinput = { {
 544                         .type   = TM6000_INPUT_TV,
 545                         .vmux   = TM6000_VMUX_VIDEO_B,
 546                         .amux   = TM6000_AMUX_SIF1,
 547                         }, {
 548                         .type   = TM6000_INPUT_COMPOSITE1,
 549                         .vmux   = TM6000_VMUX_VIDEO_A,
 550                         .amux   = TM6000_AMUX_ADC2,
 551                         }, {
 552                         .type   = TM6000_INPUT_SVIDEO,
 553                         .vmux   = TM6000_VMUX_VIDEO_AB,
 554                         .amux   = TM6000_AMUX_ADC2,
 555                         },
 556                 },
 557         },
 558         [TM6010_BOARD_BEHOLD_WANDER_LITE] = {
 559                 .name         = "Beholder Wander Lite DVB-T/TV/FM USB2.0",
 560                 .tuner_type   = TUNER_XC5000,
 561                 .tuner_addr   = 0xc2 >> 1,
 562                 .demod_addr   = 0x1e >> 1,
 563                 .type         = TM6010,
 564                 .caps = {
 565                         .has_tuner      = 1,
 566                         .has_dvb        = 1,
 567                         .has_zl10353    = 1,
 568                         .has_eeprom     = 1,
 569                         .has_remote     = 0,
 570                         .has_radio      = 1,
 571                 },
 572                 .gpio = {
 573                         .tuner_reset    = TM6010_GPIO_0,
 574                         .demod_reset    = TM6010_GPIO_1,
 575                         .power_led      = TM6010_GPIO_6,
 576                 },
 577                 .vinput = { {
 578                         .type   = TM6000_INPUT_TV,
 579                         .vmux   = TM6000_VMUX_VIDEO_B,
 580                         .amux   = TM6000_AMUX_SIF1,
 581                         },
 582                 },
 583                 .rinput = {
 584                         .type   = TM6000_INPUT_RADIO,
 585                         .amux   = TM6000_AMUX_ADC1,
 586                 },
 587         },
 588         [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = {
 589                 .name         = "Beholder Voyager Lite TV/FM USB2.0",
 590                 .tuner_type   = TUNER_XC5000,
 591                 .tuner_addr   = 0xc2 >> 1,
 592                 .type         = TM6010,
 593                 .caps = {
 594                         .has_tuner      = 1,
 595                         .has_dvb        = 0,
 596                         .has_zl10353    = 0,
 597                         .has_eeprom     = 1,
 598                         .has_remote     = 0,
 599                         .has_radio      = 1,
 600                 },
 601                 .gpio = {
 602                         .tuner_reset    = TM6010_GPIO_0,
 603                         .power_led      = TM6010_GPIO_6,
 604                 },
 605                 .vinput = { {
 606                         .type   = TM6000_INPUT_TV,
 607                         .vmux   = TM6000_VMUX_VIDEO_B,
 608                         .amux   = TM6000_AMUX_SIF1,
 609                         },
 610                 },
 611                 .rinput = {
 612                         .type   = TM6000_INPUT_RADIO,
 613                         .amux   = TM6000_AMUX_ADC1,
 614                 },
 615         },
 616 };
 617
 618 /* table of devices that work with this driver */
 619 static struct usb_device_id tm6000_id_table[] = {
 620         { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC },
 621         { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
 622         { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
 623         { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
 624         { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
 625         { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 626         { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 627         { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 628         { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 629         { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
 630         { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
 631         { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
 632         { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
 633         { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER },
 634         { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 635         { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 636         { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 637         { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 638         { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE },
 639         { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE },
 640         { }
 641 };
 642
 643 /* Control power led for show some activity */
 644 void tm6000_flash_led(struct tm6000_core *dev, u8 state)
 645 {
 646         /* Power LED unconfigured */
 647         if (!dev->gpio.power_led)
 648                 return;
 649
 650         /* ON Power LED */
 651         if (state) {
 652                 switch (dev->model) {
 653                 case TM6010_BOARD_HAUPPAUGE_900H:
 654                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 655                 case TM6010_BOARD_TWINHAN_TU501:
 656                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 657                                 dev->gpio.power_led, 0x00);
 658                         break;
 659                 case TM6010_BOARD_BEHOLD_WANDER:
 660                 case TM6010_BOARD_BEHOLD_VOYAGER:
 661                 case TM6010_BOARD_BEHOLD_WANDER_LITE:
 662                 case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
 663                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 664                                 dev->gpio.power_led, 0x01);
 665                         break;
 666                 }
 667         }
 668         /* OFF Power LED */
 669         else {
 670                 switch (dev->model) {
 671                 case TM6010_BOARD_HAUPPAUGE_900H:
 672                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 673                 case TM6010_BOARD_TWINHAN_TU501:
 674                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 675                                 dev->gpio.power_led, 0x01);
 676                         break;
 677                 case TM6010_BOARD_BEHOLD_WANDER:
 678                 case TM6010_BOARD_BEHOLD_VOYAGER:
 679                 case TM6010_BOARD_BEHOLD_WANDER_LITE:
 680                 case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
 681                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 682                                 dev->gpio.power_led, 0x00);
 683                         break;
 684                 }
 685         }
 686 }
 687
 688 /* Tuner callback to provide the proper gpio changes needed for xc5000 */
 689 int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
 690 {
 691         int rc = 0;
 692         struct tm6000_core *dev = ptr;
 693
 694         if (dev->tuner_type != TUNER_XC5000)
 695                 return 0;
 696
 697         switch (command) {
 698         case XC5000_TUNER_RESET:
 699                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 700                                dev->gpio.tuner_reset, 0x01);
 701                 msleep(15);
 702                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 703                                dev->gpio.tuner_reset, 0x00);
 704                 msleep(15);
 705                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 706                                dev->gpio.tuner_reset, 0x01);
 707                 break;
 708         }
 709         return rc;
 710 }
 711 EXPORT_SYMBOL_GPL(tm6000_xc5000_callback);
 712
 713 /* Tuner callback to provide the proper gpio changes needed for xc2028 */
 714
 715 int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
 716 {
 717         int rc = 0;
 718         struct tm6000_core *dev = ptr;
 719
 720         if (dev->tuner_type != TUNER_XC2028)
 721                 return 0;
 722
 723         switch (command) {
 724         case XC2028_RESET_CLK:
 725                 tm6000_ir_wait(dev, 0);
 726
 727                 tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
 728                                         0x02, arg);
 729                 msleep(10);
 730                 rc = tm6000_i2c_reset(dev, 10);
 731                 break;
 732         case XC2028_TUNER_RESET:
 733                 /* Reset codes during load firmware */
 734                 switch (arg) {
 735                 case 0:
 736                         /* newer tuner can faster reset */
 737                         switch (dev->model) {
 738                         case TM5600_BOARD_10MOONS_UT821:
 739                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 740                                                dev->gpio.tuner_reset, 0x01);
 741                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 742                                                0x300, 0x01);
 743                                 msleep(10);
 744                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 745                                                dev->gpio.tuner_reset, 0x00);
 746                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 747                                                0x300, 0x00);
 748                                 msleep(10);
 749                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 750                                                dev->gpio.tuner_reset, 0x01);
 751                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 752                                                0x300, 0x01);
 753                                 break;
 754                         case TM6010_BOARD_HAUPPAUGE_900H:
 755                         case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 756                         case TM6010_BOARD_TWINHAN_TU501:
 757                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 758                                                dev->gpio.tuner_reset, 0x01);
 759                                 msleep(60);
 760                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 761                                                dev->gpio.tuner_reset, 0x00);
 762                                 msleep(75);
 763                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 764                                                dev->gpio.tuner_reset, 0x01);
 765                                 msleep(60);
 766                                 break;
 767                         default:
 768                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 769                                                dev->gpio.tuner_reset, 0x00);
 770                                 msleep(130);
 771                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 772                                                dev->gpio.tuner_reset, 0x01);
 773                                 msleep(130);
 774                                 break;
 775                         }
 776
 777                         tm6000_ir_wait(dev, 1);
 778                         break;
 779                 case 1:
 780                         tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
 781                                                 0x02, 0x01);
 782                         msleep(10);
 783                         break;
 784                 case 2:
 785                         rc = tm6000_i2c_reset(dev, 100);
 786                         break;
 787                 }
 788                 break;
 789         case XC2028_I2C_FLUSH:
 790                 tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
 791                 tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
 792                 break;
 793         }
 794         return rc;
 795 }
 796 EXPORT_SYMBOL_GPL(tm6000_tuner_callback);
 797
 798 int tm6000_cards_setup(struct tm6000_core *dev)
 799 {
 800         /*
 801          * Board-specific initialization sequence. Handles all GPIO
 802          * initialization sequences that are board-specific.
 803          * Up to now, all found devices use GPIO1 and GPIO4 at the same way.
 804          * Probably, they're all based on some reference device. Due to that,
 805          * there's a common routine at the end to handle those GPIO's. Devices
 806          * that use different pinups or init sequences can just return at
 807          * the board-specific session.
 808          */
 809         switch (dev->model) {
 810         case TM6010_BOARD_HAUPPAUGE_900H:
 811         case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 812         case TM6010_BOARD_TWINHAN_TU501:
 813         case TM6010_BOARD_GENERIC:
 814                 /* Turn xceive 3028 on */
 815                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
 816                 msleep(15);
 817                 /* Turn zarlink zl10353 on */
 818                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
 819                 msleep(15);
 820                 /* Reset zarlink zl10353 */
 821                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
 822                 msleep(50);
 823                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
 824                 msleep(15);
 825                 /* Turn zarlink zl10353 off */
 826                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
 827                 msleep(15);
 828                 /* ir ? */
 829                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
 830                 msleep(15);
 831                 /* Power led on (blue) */
 832                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
 833                 msleep(15);
 834                 /* DVB led off (orange) */
 835                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
 836                 msleep(15);
 837                 /* Turn zarlink zl10353 on */
 838                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
 839                 msleep(15);
 840                 break;
 841         case TM6010_BOARD_BEHOLD_WANDER:
 842         case TM6010_BOARD_BEHOLD_WANDER_LITE:
 843                 /* Power led on (blue) */
 844                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
 845                 msleep(15);
 846                 /* Reset zarlink zl10353 */
 847                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
 848                 msleep(50);
 849                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
 850                 msleep(15);
 851                 break;
 852         case TM6010_BOARD_BEHOLD_VOYAGER:
 853         case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
 854                 /* Power led on (blue) */
 855                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
 856                 msleep(15);
 857                 break;
 858         default:
 859                 break;
 860         }
 861
 862         /*
 863          * Default initialization. Most of the devices seem to use GPIO1
 864          * and GPIO4.on the same way, so, this handles the common sequence
 865          * used by most devices.
 866          * If a device uses a different sequence or different GPIO pins for
 867          * reset, just add the code at the board-specific part
 868          */
 869
 870         if (dev->gpio.tuner_reset) {
 871                 int rc;
 872                 int i;
 873
 874                 for (i = 0; i < 2; i++) {
 875                         rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 876                                                 dev->gpio.tuner_reset, 0x00);
 877                         if (rc < 0) {
 878                                 printk(KERN_ERR "Error %i doing tuner reset\n", rc);
 879                                 return rc;
 880                         }
 881
 882                         msleep(10); /* Just to be conservative */
 883                         rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 884                                                 dev->gpio.tuner_reset, 0x01);
 885                         if (rc < 0) {
 886                                 printk(KERN_ERR "Error %i doing tuner reset\n", rc);
 887                                 return rc;
 888                         }
 889                 }
 890         } else {
 891                 printk(KERN_ERR "Tuner reset is not configured\n");
 892                 return -1;
 893         }
 894
 895         msleep(50);
 896
 897         return 0;
 898 };
 899
 900 static void tm6000_config_tuner(struct tm6000_core *dev)
 901 {
 902         struct tuner_setup tun_setup;
 903
 904         /* Load tuner module */
 905         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 906                 "tuner", dev->tuner_addr, NULL);
 907
 908         memset(&tun_setup, 0, sizeof(tun_setup));
 909         tun_setup.type = dev->tuner_type;
 910         tun_setup.addr = dev->tuner_addr;
 911
 912         tun_setup.mode_mask = 0;
 913         if (dev->caps.has_tuner)
 914                 tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
 915
 916         switch (dev->tuner_type) {
 917         case TUNER_XC2028:
 918                 tun_setup.tuner_callback = tm6000_tuner_callback;
 919                 break;
 920         case TUNER_XC5000:
 921                 tun_setup.tuner_callback = tm6000_xc5000_callback;
 922                 break;
 923         }
 924
 925         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
 926
 927         switch (dev->tuner_type) {
 928         case TUNER_XC2028: {
 929                 struct v4l2_priv_tun_config xc2028_cfg;
 930                 struct xc2028_ctrl ctl;
 931
 932                 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
 933                 memset(&ctl, 0, sizeof(ctl));
 934
 935                 ctl.demod = XC3028_FE_ZARLINK456;
 936
 937                 xc2028_cfg.tuner = TUNER_XC2028;
 938                 xc2028_cfg.priv  = &ctl;
 939
 940                 switch (dev->model) {
 941                 case TM6010_BOARD_HAUPPAUGE_900H:
 942                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 943                 case TM6010_BOARD_TWINHAN_TU501:
 944                         ctl.fname = "xc3028L-v36.fw";
 945                         break;
 946                 default:
 947                         if (dev->dev_type == TM6010)
 948                                 ctl.fname = "xc3028-v27.fw";
 949                         else
 950                                 ctl.fname = "xc3028-v24.fw";
 951                 }
 952
 953                 printk(KERN_INFO "Setting firmware parameters for xc2028\n");
 954                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
 955                                      &xc2028_cfg);
 956
 957                 }
 958                 break;
 959         case TUNER_XC5000:
 960                 {
 961                 struct v4l2_priv_tun_config  xc5000_cfg;
 962                 struct xc5000_config ctl = {
 963                         .i2c_address = dev->tuner_addr,
 964                         .if_khz      = 4570,
 965                         .radio_input = XC5000_RADIO_FM1_MONO,
 966                         };
 967
 968                 xc5000_cfg.tuner = TUNER_XC5000;
 969                 xc5000_cfg.priv  = &ctl;
 970
 971                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
 972                                      &xc5000_cfg);
 973                 }
 974                 break;
 975         default:
 976                 printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
 977                 break;
 978         }
 979 }
 980
 981 static int fill_board_specific_data(struct tm6000_core *dev)
 982 {
 983         int rc;
 984
 985         dev->dev_type   = tm6000_boards[dev->model].type;
 986         dev->tuner_type = tm6000_boards[dev->model].tuner_type;
 987         dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
 988
 989         dev->gpio = tm6000_boards[dev->model].gpio;
 990
 991         dev->ir_codes = tm6000_boards[dev->model].ir_codes;
 992
 993         dev->demod_addr = tm6000_boards[dev->model].demod_addr;
 994
 995         dev->caps = tm6000_boards[dev->model].caps;
 996
 997         dev->vinput[0] = tm6000_boards[dev->model].vinput[0];
 998         dev->vinput[1] = tm6000_boards[dev->model].vinput[1];
 999         dev->vinput[2] = tm6000_boards[dev->model].vinput[2];
1000         dev->rinput = tm6000_boards[dev->model].rinput;
1001
1002         /* setup per-model quirks */
1003         switch (dev->model) {
1004         case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
1005                 dev->quirks |= TM6000_QUIRK_NO_USB_DELAY;
1006                 break;
1007
1008         default:
1009                 break;
1010         }
1011
1012         /* initialize hardware */
1013         rc = tm6000_init(dev);
1014         if (rc < 0)
1015                 return rc;
1016
1017         return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
1018 }
1019
1020
1021 static void use_alternative_detection_method(struct tm6000_core *dev)
1022 {
1023         int i, model = -1;
1024
1025         if (!dev->eedata_size)
1026                 return;
1027
1028         for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) {
1029                 if (!tm6000_boards[i].eename_size)
1030                         continue;
1031                 if (dev->eedata_size < tm6000_boards[i].eename_pos +
1032                                        tm6000_boards[i].eename_size)
1033                         continue;
1034
1035                 if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos],
1036                             tm6000_boards[i].eename,
1037                             tm6000_boards[i].eename_size)) {
1038                         model = i;
1039                         break;
1040                 }
1041         }
1042         if (model < 0) {
1043                 printk(KERN_INFO "Device has eeprom but is currently unknown\n");
1044                 return;
1045         }
1046
1047         dev->model = model;
1048
1049         printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n",
1050                tm6000_boards[model].name, model);
1051 }
1052
1053 static int tm6000_init_dev(struct tm6000_core *dev)
1054 {
1055         struct v4l2_frequency f;
1056         int rc = 0;
1057
1058         mutex_init(&dev->lock);
1059         mutex_lock(&dev->lock);
1060
1061         if (!is_generic(dev->model)) {
1062                 rc = fill_board_specific_data(dev);
1063                 if (rc < 0)
1064                         goto err;
1065
1066                 /* register i2c bus */
1067                 rc = tm6000_i2c_register(dev);
1068                 if (rc < 0)
1069                         goto err;
1070         } else {
1071                 /* register i2c bus */
1072                 rc = tm6000_i2c_register(dev);
1073                 if (rc < 0)
1074                         goto err;
1075
1076                 use_alternative_detection_method(dev);
1077
1078                 rc = fill_board_specific_data(dev);
1079                 if (rc < 0)
1080                         goto err;
1081         }
1082
1083         /* Default values for STD and resolutions */
1084         dev->width = 720;
1085         dev->height = 480;
1086         dev->norm = V4L2_STD_PAL_M;
1087
1088         /* Configure tuner */
1089         tm6000_config_tuner(dev);
1090
1091         /* Set video standard */
1092         v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
1093
1094         /* Set tuner frequency - also loads firmware on xc2028/xc3028 */
1095         f.tuner = 0;
1096         f.type = V4L2_TUNER_ANALOG_TV;
1097         f.frequency = 3092;     /* 193.25 MHz */
1098         dev->freq = f.frequency;
1099         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
1100
1101         if (dev->caps.has_tda9874)
1102                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
1103                         "tvaudio", I2C_ADDR_TDA9874, NULL);
1104
1105         /* register and initialize V4L2 */
1106         rc = tm6000_v4l2_register(dev);
1107         if (rc < 0)
1108                 goto err;
1109
1110         tm6000_add_into_devlist(dev);
1111         tm6000_init_extension(dev);
1112
1113         tm6000_ir_init(dev);
1114
1115         mutex_unlock(&dev->lock);
1116         return 0;
1117
1118 err:
1119         mutex_unlock(&dev->lock);
1120         return rc;
1121 }
1122
1123 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
1124 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
1125
1126 static void get_max_endpoint(struct usb_device *udev,
1127                              struct usb_host_interface *alt,
1128                              char *msgtype,
1129                              struct usb_host_endpoint *curr_e,
1130                              struct tm6000_endpoint *tm_ep)
1131 {
1132         u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
1133         unsigned int size = tmp & 0x7ff;
1134
1135         if (udev->speed == USB_SPEED_HIGH)
1136                 size = size * hb_mult(tmp);
1137
1138         if (size > tm_ep->maxsize) {
1139                 tm_ep->endp = curr_e;
1140                 tm_ep->maxsize = size;
1141                 tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber;
1142                 tm_ep->bAlternateSetting = alt->desc.bAlternateSetting;
1143
1144                 printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
1145                                         msgtype, curr_e->desc.bEndpointAddress,
1146                                         size);
1147         }
1148 }
1149
1150 /*
1151  * tm6000_usb_probe()
1152  * checks for supported devices
1153  */
1154 static int tm6000_usb_probe(struct usb_interface *interface,
1155                             const struct usb_device_id *id)
1156 {
1157         struct usb_device *usbdev;
1158         struct tm6000_core *dev = NULL;
1159         int i, rc = 0;
1160         int nr = 0;
1161         char *speed;
1162
1163         usbdev = usb_get_dev(interface_to_usbdev(interface));
1164
1165         /* Selects the proper interface */
1166         rc = usb_set_interface(usbdev, 0, 1);
1167         if (rc < 0)
1168                 goto err;
1169
1170         /* Check to see next free device and mark as used */
1171         nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS);
1172         if (nr >= TM6000_MAXBOARDS) {
1173                 printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS);
1174                 usb_put_dev(usbdev);
1175                 return -ENOMEM;
1176         }
1177
1178         /* Create and initialize dev struct */
1179         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1180         if (dev == NULL) {
1181                 printk(KERN_ERR "tm6000" ": out of memory!\n");
1182                 usb_put_dev(usbdev);
1183                 return -ENOMEM;
1184         }
1185         spin_lock_init(&dev->slock);
1186         mutex_init(&dev->usb_lock);
1187
1188         /* Increment usage count */
1189         set_bit(nr, &tm6000_devused);
1190         snprintf(dev->name, 29, "tm6000 #%d", nr);
1191
1192         dev->model = id->driver_info;
1193         if (card[nr] < ARRAY_SIZE(tm6000_boards))
1194                 dev->model = card[nr];
1195
1196         dev->udev = usbdev;
1197         dev->devno = nr;
1198
1199         switch (usbdev->speed) {
1200         case USB_SPEED_LOW:
1201                 speed = "1.5";
1202                 break;
1203         case USB_SPEED_UNKNOWN:
1204         case USB_SPEED_FULL:
1205                 speed = "12";
1206                 break;
1207         case USB_SPEED_HIGH:
1208                 speed = "480";
1209                 break;
1210         default:
1211                 speed = "unknown";
1212         }
1213
1214         /* Get endpoints */
1215         for (i = 0; i < interface->num_altsetting; i++) {
1216                 int ep;
1217
1218                 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
1219                         struct usb_host_endpoint        *e;
1220                         int dir_out;
1221
1222                         e = &interface->altsetting[i].endpoint[ep];
1223
1224                         dir_out = ((e->desc.bEndpointAddress &
1225                                         USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
1226
1227                         printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n",
1228                                i,
1229                                interface->altsetting[i].desc.bInterfaceNumber,
1230                                interface->altsetting[i].desc.bInterfaceClass);
1231
1232                         switch (e->desc.bmAttributes) {
1233                         case USB_ENDPOINT_XFER_BULK:
1234                                 if (!dir_out) {
1235                                         get_max_endpoint(usbdev,
1236                                                          &interface->altsetting[i],
1237                                                          "Bulk IN", e,
1238                                                          &dev->bulk_in);
1239                                 } else {
1240                                         get_max_endpoint(usbdev,
1241                                                          &interface->altsetting[i],
1242                                                          "Bulk OUT", e,
1243                                                          &dev->bulk_out);
1244                                 }
1245                                 break;
1246                         case USB_ENDPOINT_XFER_ISOC:
1247                                 if (!dir_out) {
1248                                         get_max_endpoint(usbdev,
1249                                                          &interface->altsetting[i],
1250                                                          "ISOC IN", e,
1251                                                          &dev->isoc_in);
1252                                 } else {
1253                                         get_max_endpoint(usbdev,
1254                                                          &interface->altsetting[i],
1255                                                          "ISOC OUT", e,
1256                                                          &dev->isoc_out);
1257                                 }
1258                                 break;
1259                         case USB_ENDPOINT_XFER_INT:
1260                                 if (!dir_out) {
1261                                         get_max_endpoint(usbdev,
1262                                                         &interface->altsetting[i],
1263                                                         "INT IN", e,
1264                                                         &dev->int_in);
1265                                 } else {
1266                                         get_max_endpoint(usbdev,
1267                                                         &interface->altsetting[i],
1268                                                         "INT OUT", e,
1269                                                         &dev->int_out);
1270                                 }
1271                                 break;
1272                         }
1273                 }
1274         }
1275
1276
1277         printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
1278                 speed,
1279                 le16_to_cpu(dev->udev->descriptor.idVendor),
1280                 le16_to_cpu(dev->udev->descriptor.idProduct),
1281                 interface->altsetting->desc.bInterfaceNumber);
1282
1283 /* check if the the device has the iso in endpoint at the correct place */
1284         if (!dev->isoc_in.endp) {
1285                 printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
1286                 rc = -ENODEV;
1287
1288                 goto err;
1289         }
1290
1291         /* save our data pointer in this interface device */
1292         usb_set_intfdata(interface, dev);
1293
1294         printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name);
1295
1296         rc = tm6000_init_dev(dev);
1297         if (rc < 0)
1298                 goto err;
1299
1300         return 0;
1301
1302 err:
1303         printk(KERN_ERR "tm6000: Error %d while registering\n", rc);
1304
1305         clear_bit(nr, &tm6000_devused);
1306         usb_put_dev(usbdev);
1307
1308         kfree(dev);
1309         return rc;
1310 }
1311
1312 /*
1313  * tm6000_usb_disconnect()
1314  * called when the device gets diconencted
1315  * video device will be unregistered on v4l2_close in case it is still open
1316  */
1317 static void tm6000_usb_disconnect(struct usb_interface *interface)
1318 {
1319         struct tm6000_core *dev = usb_get_intfdata(interface);
1320         usb_set_intfdata(interface, NULL);
1321
1322         if (!dev)
1323                 return;
1324
1325         printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name);
1326
1327         tm6000_ir_fini(dev);
1328
1329         if (dev->gpio.power_led) {
1330                 switch (dev->model) {
1331                 case TM6010_BOARD_HAUPPAUGE_900H:
1332                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
1333                 case TM6010_BOARD_TWINHAN_TU501:
1334                         /* Power led off */
1335                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
1336                                 dev->gpio.power_led, 0x01);
1337                         msleep(15);
1338                         break;
1339                 case TM6010_BOARD_BEHOLD_WANDER:
1340                 case TM6010_BOARD_BEHOLD_VOYAGER:
1341                 case TM6010_BOARD_BEHOLD_WANDER_LITE:
1342                 case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
1343                         /* Power led off */
1344                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
1345                                 dev->gpio.power_led, 0x00);
1346                         msleep(15);
1347                         break;
1348                 }
1349         }
1350         tm6000_v4l2_unregister(dev);
1351
1352         tm6000_i2c_unregister(dev);
1353
1354         v4l2_device_unregister(&dev->v4l2_dev);
1355
1356         dev->state |= DEV_DISCONNECTED;
1357
1358         usb_put_dev(dev->udev);
1359
1360         tm6000_close_extension(dev);
1361         tm6000_remove_from_devlist(dev);
1362
1363         clear_bit(dev->devno, &tm6000_devused);
1364         kfree(dev);
1365 }
1366
1367 static struct usb_driver tm6000_usb_driver = {
1368                 .name = "tm6000",
1369                 .probe = tm6000_usb_probe,
1370                 .disconnect = tm6000_usb_disconnect,
1371                 .id_table = tm6000_id_table,
1372 };
1373
1374 static int __init tm6000_module_init(void)
1375 {
1376         int result;
1377
1378         printk(KERN_INFO "tm6000" " v4l2 driver version %d.%d.%d loaded\n",
1379                (TM6000_VERSION  >> 16) & 0xff,
1380                (TM6000_VERSION  >> 8) & 0xff, TM6000_VERSION  & 0xff);
1381
1382         /* register this driver with the USB subsystem */
1383         result = usb_register(&tm6000_usb_driver);
1384         if (result)
1385                 printk(KERN_ERR "tm6000"
1386                            " usb_register failed. Error number %d.\n", result);
1387
1388         return result;
1389 }
1390
1391 static void __exit tm6000_module_exit(void)
1392 {
1393         /* deregister at USB subsystem */
1394         usb_deregister(&tm6000_usb_driver);
1395 }
1396
1397 module_init(tm6000_module_init);
1398 module_exit(tm6000_module_exit);
1399
1400 MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter");
1401 MODULE_AUTHOR("Mauro Carvalho Chehab");
1402 MODULE_LICENSE("GPL");