drivers/media/video/cx23885/cx23885-dvb.c

   1 /*
   2  *  Driver for the Conexant CX23885 PCIe bridge
   3  *
   4  *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation; either version 2 of the License, or
   9  *  (at your option) any later version.
  10  *
  11  *  This program is distributed in the hope that it will be useful,
  12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  *
  15  *  GNU General Public License for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License
  18  *  along with this program; if not, write to the Free Software
  19  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  */
  21
  22 #include <linux/module.h>
  23 #include <linux/init.h>
  24 #include <linux/device.h>
  25 #include <linux/fs.h>
  26 #include <linux/kthread.h>
  27 #include <linux/file.h>
  28 #include <linux/suspend.h>
  29
  30 #include "cx23885.h"
  31 #include <media/v4l2-common.h>
  32
  33 #include "dvb_ca_en50221.h"
  34 #include "s5h1409.h"
  35 #include "s5h1411.h"
  36 #include "mt2131.h"
  37 #include "tda8290.h"
  38 #include "tda18271.h"
  39 #include "lgdt330x.h"
  40 #include "xc4000.h"
  41 #include "xc5000.h"
  42 #include "max2165.h"
  43 #include "tda10048.h"
  44 #include "tuner-xc2028.h"
  45 #include "tuner-simple.h"
  46 #include "dib7000p.h"
  47 #include "dibx000_common.h"
  48 #include "zl10353.h"
  49 #include "stv0900.h"
  50 #include "stv0900_reg.h"
  51 #include "stv6110.h"
  52 #include "lnbh24.h"
  53 #include "cx24116.h"
  54 #include "cimax2.h"
  55 #include "lgs8gxx.h"
  56 #include "netup-eeprom.h"
  57 #include "netup-init.h"
  58 #include "lgdt3305.h"
  59 #include "atbm8830.h"
  60 #include "ds3000.h"
  61 #include "cx23885-f300.h"
  62 #include "altera-ci.h"
  63 #include "stv0367.h"
  64 #include "drxk.h"
  65 #include "mt2063.h"
  66
  67 static unsigned int debug;
  68
  69 #define dprintk(level, fmt, arg...)\
  70         do { if (debug >= level)\
  71                 printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
  72         } while (0)
  73
  74 /* ------------------------------------------------------------------ */
  75
  76 static unsigned int alt_tuner;
  77 module_param(alt_tuner, int, 0644);
  78 MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
  79
  80 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  81
  82 /* ------------------------------------------------------------------ */
  83
  84 static int dvb_buf_setup(struct videobuf_queue *q,
  85                          unsigned int *count, unsigned int *size)
  86 {
  87         struct cx23885_tsport *port = q->priv_data;
  88
  89         port->ts_packet_size  = 188 * 4;
  90         port->ts_packet_count = 32;
  91
  92         *size  = port->ts_packet_size * port->ts_packet_count;
  93         *count = 32;
  94         return 0;
  95 }
  96
  97 static int dvb_buf_prepare(struct videobuf_queue *q,
  98                            struct videobuf_buffer *vb, enum v4l2_field field)
  99 {
 100         struct cx23885_tsport *port = q->priv_data;
 101         return cx23885_buf_prepare(q, port, (struct cx23885_buffer *)vb, field);
 102 }
 103
 104 static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
 105 {
 106         struct cx23885_tsport *port = q->priv_data;
 107         cx23885_buf_queue(port, (struct cx23885_buffer *)vb);
 108 }
 109
 110 static void dvb_buf_release(struct videobuf_queue *q,
 111                             struct videobuf_buffer *vb)
 112 {
 113         cx23885_free_buffer(q, (struct cx23885_buffer *)vb);
 114 }
 115
 116 static int cx23885_dvb_set_frontend(struct dvb_frontend *fe);
 117
 118 static void cx23885_dvb_gate_ctrl(struct cx23885_tsport  *port, int open)
 119 {
 120         struct videobuf_dvb_frontends *f;
 121         struct videobuf_dvb_frontend *fe;
 122
 123         f = &port->frontends;
 124
 125         if (f->gate <= 1) /* undefined or fe0 */
 126                 fe = videobuf_dvb_get_frontend(f, 1);
 127         else
 128                 fe = videobuf_dvb_get_frontend(f, f->gate);
 129
 130         if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl)
 131                 fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open);
 132
 133         /*
 134          * FIXME: Improve this path to avoid calling the
 135          * cx23885_dvb_set_frontend() every time it passes here.
 136          */
 137         cx23885_dvb_set_frontend(fe->dvb.frontend);
 138 }
 139
 140 static struct videobuf_queue_ops dvb_qops = {
 141         .buf_setup    = dvb_buf_setup,
 142         .buf_prepare  = dvb_buf_prepare,
 143         .buf_queue    = dvb_buf_queue,
 144         .buf_release  = dvb_buf_release,
 145 };
 146
 147 static struct s5h1409_config hauppauge_generic_config = {
 148         .demod_address = 0x32 >> 1,
 149         .output_mode   = S5H1409_SERIAL_OUTPUT,
 150         .gpio          = S5H1409_GPIO_ON,
 151         .qam_if        = 44000,
 152         .inversion     = S5H1409_INVERSION_OFF,
 153         .status_mode   = S5H1409_DEMODLOCKING,
 154         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 155 };
 156
 157 static struct tda10048_config hauppauge_hvr1200_config = {
 158         .demod_address    = 0x10 >> 1,
 159         .output_mode      = TDA10048_SERIAL_OUTPUT,
 160         .fwbulkwritelen   = TDA10048_BULKWRITE_200,
 161         .inversion        = TDA10048_INVERSION_ON,
 162         .dtv6_if_freq_khz = TDA10048_IF_3300,
 163         .dtv7_if_freq_khz = TDA10048_IF_3800,
 164         .dtv8_if_freq_khz = TDA10048_IF_4300,
 165         .clk_freq_khz     = TDA10048_CLK_16000,
 166 };
 167
 168 static struct tda10048_config hauppauge_hvr1210_config = {
 169         .demod_address    = 0x10 >> 1,
 170         .output_mode      = TDA10048_SERIAL_OUTPUT,
 171         .fwbulkwritelen   = TDA10048_BULKWRITE_200,
 172         .inversion        = TDA10048_INVERSION_ON,
 173         .dtv6_if_freq_khz = TDA10048_IF_3300,
 174         .dtv7_if_freq_khz = TDA10048_IF_3500,
 175         .dtv8_if_freq_khz = TDA10048_IF_4000,
 176         .clk_freq_khz     = TDA10048_CLK_16000,
 177 };
 178
 179 static struct s5h1409_config hauppauge_ezqam_config = {
 180         .demod_address = 0x32 >> 1,
 181         .output_mode   = S5H1409_SERIAL_OUTPUT,
 182         .gpio          = S5H1409_GPIO_OFF,
 183         .qam_if        = 4000,
 184         .inversion     = S5H1409_INVERSION_ON,
 185         .status_mode   = S5H1409_DEMODLOCKING,
 186         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 187 };
 188
 189 static struct s5h1409_config hauppauge_hvr1800lp_config = {
 190         .demod_address = 0x32 >> 1,
 191         .output_mode   = S5H1409_SERIAL_OUTPUT,
 192         .gpio          = S5H1409_GPIO_OFF,
 193         .qam_if        = 44000,
 194         .inversion     = S5H1409_INVERSION_OFF,
 195         .status_mode   = S5H1409_DEMODLOCKING,
 196         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 197 };
 198
 199 static struct s5h1409_config hauppauge_hvr1500_config = {
 200         .demod_address = 0x32 >> 1,
 201         .output_mode   = S5H1409_SERIAL_OUTPUT,
 202         .gpio          = S5H1409_GPIO_OFF,
 203         .inversion     = S5H1409_INVERSION_OFF,
 204         .status_mode   = S5H1409_DEMODLOCKING,
 205         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 206 };
 207
 208 static struct mt2131_config hauppauge_generic_tunerconfig = {
 209         0x61
 210 };
 211
 212 static struct lgdt330x_config fusionhdtv_5_express = {
 213         .demod_address = 0x0e,
 214         .demod_chip = LGDT3303,
 215         .serial_mpeg = 0x40,
 216 };
 217
 218 static struct s5h1409_config hauppauge_hvr1500q_config = {
 219         .demod_address = 0x32 >> 1,
 220         .output_mode   = S5H1409_SERIAL_OUTPUT,
 221         .gpio          = S5H1409_GPIO_ON,
 222         .qam_if        = 44000,
 223         .inversion     = S5H1409_INVERSION_OFF,
 224         .status_mode   = S5H1409_DEMODLOCKING,
 225         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 226 };
 227
 228 static struct s5h1409_config dvico_s5h1409_config = {
 229         .demod_address = 0x32 >> 1,
 230         .output_mode   = S5H1409_SERIAL_OUTPUT,
 231         .gpio          = S5H1409_GPIO_ON,
 232         .qam_if        = 44000,
 233         .inversion     = S5H1409_INVERSION_OFF,
 234         .status_mode   = S5H1409_DEMODLOCKING,
 235         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 236 };
 237
 238 static struct s5h1411_config dvico_s5h1411_config = {
 239         .output_mode   = S5H1411_SERIAL_OUTPUT,
 240         .gpio          = S5H1411_GPIO_ON,
 241         .qam_if        = S5H1411_IF_44000,
 242         .vsb_if        = S5H1411_IF_44000,
 243         .inversion     = S5H1411_INVERSION_OFF,
 244         .status_mode   = S5H1411_DEMODLOCKING,
 245         .mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 246 };
 247
 248 static struct s5h1411_config hcw_s5h1411_config = {
 249         .output_mode   = S5H1411_SERIAL_OUTPUT,
 250         .gpio          = S5H1411_GPIO_OFF,
 251         .vsb_if        = S5H1411_IF_44000,
 252         .qam_if        = S5H1411_IF_4000,
 253         .inversion     = S5H1411_INVERSION_ON,
 254         .status_mode   = S5H1411_DEMODLOCKING,
 255         .mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 256 };
 257
 258 static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
 259         .i2c_address      = 0x61,
 260         .if_khz           = 5380,
 261 };
 262
 263 static struct xc5000_config dvico_xc5000_tunerconfig = {
 264         .i2c_address      = 0x64,
 265         .if_khz           = 5380,
 266 };
 267
 268 static struct tda829x_config tda829x_no_probe = {
 269         .probe_tuner = TDA829X_DONT_PROBE,
 270 };
 271
 272 static struct tda18271_std_map hauppauge_tda18271_std_map = {
 273         .atsc_6   = { .if_freq = 5380, .agc_mode = 3, .std = 3,
 274                       .if_lvl = 6, .rfagc_top = 0x37 },
 275         .qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,
 276                       .if_lvl = 6, .rfagc_top = 0x37 },
 277 };
 278
 279 static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
 280         .dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
 281                       .if_lvl = 1, .rfagc_top = 0x37, },
 282         .dvbt_7   = { .if_freq = 3800, .agc_mode = 3, .std = 5,
 283                       .if_lvl = 1, .rfagc_top = 0x37, },
 284         .dvbt_8   = { .if_freq = 4300, .agc_mode = 3, .std = 6,
 285                       .if_lvl = 1, .rfagc_top = 0x37, },
 286 };
 287
 288 static struct tda18271_config hauppauge_tda18271_config = {
 289         .std_map = &hauppauge_tda18271_std_map,
 290         .gate    = TDA18271_GATE_ANALOG,
 291         .output_opt = TDA18271_OUTPUT_LT_OFF,
 292 };
 293
 294 static struct tda18271_config hauppauge_hvr1200_tuner_config = {
 295         .std_map = &hauppauge_hvr1200_tda18271_std_map,
 296         .gate    = TDA18271_GATE_ANALOG,
 297         .output_opt = TDA18271_OUTPUT_LT_OFF,
 298 };
 299
 300 static struct tda18271_config hauppauge_hvr1210_tuner_config = {
 301         .gate    = TDA18271_GATE_DIGITAL,
 302         .output_opt = TDA18271_OUTPUT_LT_OFF,
 303 };
 304
 305 static struct tda18271_std_map hauppauge_hvr127x_std_map = {
 306         .atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 4,
 307                       .if_lvl = 1, .rfagc_top = 0x58 },
 308         .qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 5,
 309                       .if_lvl = 1, .rfagc_top = 0x58 },
 310 };
 311
 312 static struct tda18271_config hauppauge_hvr127x_config = {
 313         .std_map = &hauppauge_hvr127x_std_map,
 314         .output_opt = TDA18271_OUTPUT_LT_OFF,
 315 };
 316
 317 static struct lgdt3305_config hauppauge_lgdt3305_config = {
 318         .i2c_addr           = 0x0e,
 319         .mpeg_mode          = LGDT3305_MPEG_SERIAL,
 320         .tpclk_edge         = LGDT3305_TPCLK_FALLING_EDGE,
 321         .tpvalid_polarity   = LGDT3305_TP_VALID_HIGH,
 322         .deny_i2c_rptr      = 1,
 323         .spectral_inversion = 1,
 324         .qam_if_khz         = 4000,
 325         .vsb_if_khz         = 3250,
 326 };
 327
 328 static struct dibx000_agc_config xc3028_agc_config = {
 329         BAND_VHF | BAND_UHF,    /* band_caps */
 330
 331         /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
 332          * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
 333          * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
 334          * P_agc_nb_est=2, P_agc_write=0
 335          */
 336         (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
 337                 (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
 338
 339         712,    /* inv_gain */
 340         21,     /* time_stabiliz */
 341
 342         0,      /* alpha_level */
 343         118,    /* thlock */
 344
 345         0,      /* wbd_inv */
 346         2867,   /* wbd_ref */
 347         0,      /* wbd_sel */
 348         2,      /* wbd_alpha */
 349
 350         0,      /* agc1_max */
 351         0,      /* agc1_min */
 352         39718,  /* agc2_max */
 353         9930,   /* agc2_min */
 354         0,      /* agc1_pt1 */
 355         0,      /* agc1_pt2 */
 356         0,      /* agc1_pt3 */
 357         0,      /* agc1_slope1 */
 358         0,      /* agc1_slope2 */
 359         0,      /* agc2_pt1 */
 360         128,    /* agc2_pt2 */
 361         29,     /* agc2_slope1 */
 362         29,     /* agc2_slope2 */
 363
 364         17,     /* alpha_mant */
 365         27,     /* alpha_exp */
 366         23,     /* beta_mant */
 367         51,     /* beta_exp */
 368
 369         1,      /* perform_agc_softsplit */
 370 };
 371
 372 /* PLL Configuration for COFDM BW_MHz = 8.000000
 373  * With external clock = 30.000000 */
 374 static struct dibx000_bandwidth_config xc3028_bw_config = {
 375         60000,  /* internal */
 376         30000,  /* sampling */
 377         1,      /* pll_cfg: prediv */
 378         8,      /* pll_cfg: ratio */
 379         3,      /* pll_cfg: range */
 380         1,      /* pll_cfg: reset */
 381         0,      /* pll_cfg: bypass */
 382         0,      /* misc: refdiv */
 383         0,      /* misc: bypclk_div */
 384         1,      /* misc: IO_CLK_en_core */
 385         1,      /* misc: ADClkSrc */
 386         0,      /* misc: modulo */
 387         (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
 388         (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
 389         20452225, /* timf */
 390         30000000  /* xtal_hz */
 391 };
 392
 393 static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
 394         .output_mpeg2_in_188_bytes = 1,
 395         .hostbus_diversity = 1,
 396         .tuner_is_baseband = 0,
 397         .update_lna  = NULL,
 398
 399         .agc_config_count = 1,
 400         .agc = &xc3028_agc_config,
 401         .bw  = &xc3028_bw_config,
 402
 403         .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
 404         .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
 405         .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
 406
 407         .pwm_freq_div = 0,
 408         .agc_control  = NULL,
 409         .spur_protect = 0,
 410
 411         .output_mode = OUTMODE_MPEG2_SERIAL,
 412 };
 413
 414 static struct zl10353_config dvico_fusionhdtv_xc3028 = {
 415         .demod_address = 0x0f,
 416         .if2           = 45600,
 417         .no_tuner      = 1,
 418         .disable_i2c_gate_ctrl = 1,
 419 };
 420
 421 static struct stv0900_reg stv0900_ts_regs[] = {
 422         { R0900_TSGENERAL, 0x00 },
 423         { R0900_P1_TSSPEED, 0x40 },
 424         { R0900_P2_TSSPEED, 0x40 },
 425         { R0900_P1_TSCFGM, 0xc0 },
 426         { R0900_P2_TSCFGM, 0xc0 },
 427         { R0900_P1_TSCFGH, 0xe0 },
 428         { R0900_P2_TSCFGH, 0xe0 },
 429         { R0900_P1_TSCFGL, 0x20 },
 430         { R0900_P2_TSCFGL, 0x20 },
 431         { 0xffff, 0xff }, /* terminate */
 432 };
 433
 434 static struct stv0900_config netup_stv0900_config = {
 435         .demod_address = 0x68,
 436         .demod_mode = 1, /* dual */
 437         .xtal = 8000000,
 438         .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
 439         .diseqc_mode = 2,/* 2/3 PWM */
 440         .ts_config_regs = stv0900_ts_regs,
 441         .tun1_maddress = 0,/* 0x60 */
 442         .tun2_maddress = 3,/* 0x63 */
 443         .tun1_adc = 1,/* 1 Vpp */
 444         .tun2_adc = 1,/* 1 Vpp */
 445 };
 446
 447 static struct stv6110_config netup_stv6110_tunerconfig_a = {
 448         .i2c_address = 0x60,
 449         .mclk = 16000000,
 450         .clk_div = 1,
 451         .gain = 8, /* +16 dB  - maximum gain */
 452 };
 453
 454 static struct stv6110_config netup_stv6110_tunerconfig_b = {
 455         .i2c_address = 0x63,
 456         .mclk = 16000000,
 457         .clk_div = 1,
 458         .gain = 8, /* +16 dB  - maximum gain */
 459 };
 460
 461 static struct cx24116_config tbs_cx24116_config = {
 462         .demod_address = 0x55,
 463 };
 464
 465 static struct ds3000_config tevii_ds3000_config = {
 466         .demod_address = 0x68,
 467 };
 468
 469 static struct cx24116_config dvbworld_cx24116_config = {
 470         .demod_address = 0x05,
 471 };
 472
 473 static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
 474         .prod = LGS8GXX_PROD_LGS8GL5,
 475         .demod_address = 0x19,
 476         .serial_ts = 0,
 477         .ts_clk_pol = 1,
 478         .ts_clk_gated = 1,
 479         .if_clk_freq = 30400, /* 30.4 MHz */
 480         .if_freq = 5380, /* 5.38 MHz */
 481         .if_neg_center = 1,
 482         .ext_adc = 0,
 483         .adc_signed = 0,
 484         .if_neg_edge = 0,
 485 };
 486
 487 static struct xc5000_config mygica_x8506_xc5000_config = {
 488         .i2c_address = 0x61,
 489         .if_khz = 5380,
 490 };
 491
 492 static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
 493 {
 494         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 495         struct cx23885_tsport *port = fe->dvb->priv;
 496         struct cx23885_dev *dev = port->dev;
 497
 498         switch (dev->board) {
 499         case CX23885_BOARD_HAUPPAUGE_HVR1275:
 500                 switch (p->modulation) {
 501                 case VSB_8:
 502                         cx23885_gpio_clear(dev, GPIO_5);
 503                         break;
 504                 case QAM_64:
 505                 case QAM_256:
 506                 default:
 507                         cx23885_gpio_set(dev, GPIO_5);
 508                         break;
 509                 }
 510                 break;
 511         case CX23885_BOARD_MYGICA_X8506:
 512         case CX23885_BOARD_MAGICPRO_PROHDTVE2:
 513                 /* Select Digital TV */
 514                 cx23885_gpio_set(dev, GPIO_0);
 515                 break;
 516         }
 517         return 0;
 518 }
 519
 520 static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
 521         .prod = LGS8GXX_PROD_LGS8G75,
 522         .demod_address = 0x19,
 523         .serial_ts = 0,
 524         .ts_clk_pol = 1,
 525         .ts_clk_gated = 1,
 526         .if_clk_freq = 30400, /* 30.4 MHz */
 527         .if_freq = 6500, /* 6.50 MHz */
 528         .if_neg_center = 1,
 529         .ext_adc = 0,
 530         .adc_signed = 1,
 531         .adc_vpp = 2, /* 1.6 Vpp */
 532         .if_neg_edge = 1,
 533 };
 534
 535 static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
 536         .i2c_address = 0x61,
 537         .if_khz = 6500,
 538 };
 539
 540 static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
 541         .prod = ATBM8830_PROD_8830,
 542         .demod_address = 0x44,
 543         .serial_ts = 0,
 544         .ts_sampling_edge = 1,
 545         .ts_clk_gated = 0,
 546         .osc_clk_freq = 30400, /* in kHz */
 547         .if_freq = 0, /* zero IF */
 548         .zif_swap_iq = 1,
 549         .agc_min = 0x2E,
 550         .agc_max = 0xFF,
 551         .agc_hold_loop = 0,
 552 };
 553
 554 static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
 555         .i2c_address = 0x60,
 556         .osc_clk = 20
 557 };
 558
 559 static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
 560         .prod = ATBM8830_PROD_8830,
 561         .demod_address = 0x44,
 562         .serial_ts = 1,
 563         .ts_sampling_edge = 1,
 564         .ts_clk_gated = 0,
 565         .osc_clk_freq = 30400, /* in kHz */
 566         .if_freq = 0, /* zero IF */
 567         .zif_swap_iq = 1,
 568         .agc_min = 0x2E,
 569         .agc_max = 0xFF,
 570         .agc_hold_loop = 0,
 571 };
 572
 573 static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
 574         .i2c_address = 0x60,
 575         .osc_clk = 20
 576 };
 577 static struct stv0367_config netup_stv0367_config[] = {
 578         {
 579                 .demod_address = 0x1c,
 580                 .xtal = 27000000,
 581                 .if_khz = 4500,
 582                 .if_iq_mode = 0,
 583                 .ts_mode = 1,
 584                 .clk_pol = 0,
 585         }, {
 586                 .demod_address = 0x1d,
 587                 .xtal = 27000000,
 588                 .if_khz = 4500,
 589                 .if_iq_mode = 0,
 590                 .ts_mode = 1,
 591                 .clk_pol = 0,
 592         },
 593 };
 594
 595 static struct xc5000_config netup_xc5000_config[] = {
 596         {
 597                 .i2c_address = 0x61,
 598                 .if_khz = 4500,
 599         }, {
 600                 .i2c_address = 0x64,
 601                 .if_khz = 4500,
 602         },
 603 };
 604
 605 static struct drxk_config terratec_drxk_config[] = {
 606         {
 607                 .adr = 0x29,
 608                 .no_i2c_bridge = 1,
 609         }, {
 610                 .adr = 0x2a,
 611                 .no_i2c_bridge = 1,
 612         },
 613 };
 614
 615 static struct mt2063_config terratec_mt2063_config[] = {
 616         {
 617                 .tuner_address = 0x60,
 618         }, {
 619                 .tuner_address = 0x67,
 620         },
 621 };
 622
 623 int netup_altera_fpga_rw(void *device, int flag, int data, int read)
 624 {
 625         struct cx23885_dev *dev = (struct cx23885_dev *)device;
 626         unsigned long timeout = jiffies + msecs_to_jiffies(1);
 627         uint32_t mem = 0;
 628
 629         mem = cx_read(MC417_RWD);
 630         if (read)
 631                 cx_set(MC417_OEN, ALT_DATA);
 632         else {
 633                 cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */
 634                 mem &= ~ALT_DATA;
 635                 mem |= (data & ALT_DATA);
 636         }
 637
 638         if (flag)
 639                 mem |= ALT_AD_RG;
 640         else
 641                 mem &= ~ALT_AD_RG;
 642
 643         mem &= ~ALT_CS;
 644         if (read)
 645                 mem = (mem & ~ALT_RD) | ALT_WR;
 646         else
 647                 mem = (mem & ~ALT_WR) | ALT_RD;
 648
 649         cx_write(MC417_RWD, mem);  /* start RW cycle */
 650
 651         for (;;) {
 652                 mem = cx_read(MC417_RWD);
 653                 if ((mem & ALT_RDY) == 0)
 654                         break;
 655                 if (time_after(jiffies, timeout))
 656                         break;
 657                 udelay(1);
 658         }
 659
 660         cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS);
 661         if (read)
 662                 return mem & ALT_DATA;
 663
 664         return 0;
 665 };
 666
 667 static int dvb_register(struct cx23885_tsport *port)
 668 {
 669         struct cx23885_dev *dev = port->dev;
 670         struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
 671         struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
 672         int mfe_shared = 0; /* bus not shared by default */
 673         int ret;
 674
 675         /* Get the first frontend */
 676         fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
 677         if (!fe0)
 678                 return -EINVAL;
 679
 680         /* init struct videobuf_dvb */
 681         fe0->dvb.name = dev->name;
 682
 683         /* multi-frontend gate control is undefined or defaults to fe0 */
 684         port->frontends.gate = 0;
 685
 686         /* Sets the gate control callback to be used by i2c command calls */
 687         port->gate_ctrl = cx23885_dvb_gate_ctrl;
 688
 689         /* init frontend */
 690         switch (dev->board) {
 691         case CX23885_BOARD_HAUPPAUGE_HVR1250:
 692                 i2c_bus = &dev->i2c_bus[0];
 693                 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 694                                                 &hauppauge_generic_config,
 695                                                 &i2c_bus->i2c_adap);
 696                 if (fe0->dvb.frontend != NULL) {
 697                         dvb_attach(mt2131_attach, fe0->dvb.frontend,
 698                                    &i2c_bus->i2c_adap,
 699                                    &hauppauge_generic_tunerconfig, 0);
 700                 }
 701                 break;
 702         case CX23885_BOARD_HAUPPAUGE_HVR1270:
 703         case CX23885_BOARD_HAUPPAUGE_HVR1275:
 704                 i2c_bus = &dev->i2c_bus[0];
 705                 fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
 706                                                &hauppauge_lgdt3305_config,
 707                                                &i2c_bus->i2c_adap);
 708                 if (fe0->dvb.frontend != NULL) {
 709                         dvb_attach(tda18271_attach, fe0->dvb.frontend,
 710                                    0x60, &dev->i2c_bus[1].i2c_adap,
 711                                    &hauppauge_hvr127x_config);
 712                 }
 713                 break;
 714         case CX23885_BOARD_HAUPPAUGE_HVR1255:
 715         case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
 716                 i2c_bus = &dev->i2c_bus[0];
 717                 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
 718                                                &hcw_s5h1411_config,
 719                                                &i2c_bus->i2c_adap);
 720                 if (fe0->dvb.frontend != NULL) {
 721                         dvb_attach(tda18271_attach, fe0->dvb.frontend,
 722                                    0x60, &dev->i2c_bus[1].i2c_adap,
 723                                    &hauppauge_tda18271_config);
 724                 }
 725
 726                 tda18271_attach(&dev->ts1.analog_fe,
 727                         0x60, &dev->i2c_bus[1].i2c_adap,
 728                         &hauppauge_tda18271_config);
 729
 730                 break;
 731         case CX23885_BOARD_HAUPPAUGE_HVR1800:
 732                 i2c_bus = &dev->i2c_bus[0];
 733                 switch (alt_tuner) {
 734                 case 1:
 735                         fe0->dvb.frontend =
 736                                 dvb_attach(s5h1409_attach,
 737                                            &hauppauge_ezqam_config,
 738                                            &i2c_bus->i2c_adap);
 739                         if (fe0->dvb.frontend != NULL) {
 740                                 dvb_attach(tda829x_attach, fe0->dvb.frontend,
 741                                            &dev->i2c_bus[1].i2c_adap, 0x42,
 742                                            &tda829x_no_probe);
 743                                 dvb_attach(tda18271_attach, fe0->dvb.frontend,
 744                                            0x60, &dev->i2c_bus[1].i2c_adap,
 745                                            &hauppauge_tda18271_config);
 746                         }
 747                         break;
 748                 case 0:
 749                 default:
 750                         fe0->dvb.frontend =
 751                                 dvb_attach(s5h1409_attach,
 752                                            &hauppauge_generic_config,
 753                                            &i2c_bus->i2c_adap);
 754                         if (fe0->dvb.frontend != NULL)
 755                                 dvb_attach(mt2131_attach, fe0->dvb.frontend,
 756                                            &i2c_bus->i2c_adap,
 757                                            &hauppauge_generic_tunerconfig, 0);
 758                         break;
 759                 }
 760                 break;
 761         case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 762                 i2c_bus = &dev->i2c_bus[0];
 763                 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 764                                                 &hauppauge_hvr1800lp_config,
 765                                                 &i2c_bus->i2c_adap);
 766                 if (fe0->dvb.frontend != NULL) {
 767                         dvb_attach(mt2131_attach, fe0->dvb.frontend,
 768                                    &i2c_bus->i2c_adap,
 769                                    &hauppauge_generic_tunerconfig, 0);
 770                 }
 771                 break;
 772         case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
 773                 i2c_bus = &dev->i2c_bus[0];
 774                 fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
 775                                                 &fusionhdtv_5_express,
 776                                                 &i2c_bus->i2c_adap);
 777                 if (fe0->dvb.frontend != NULL) {
 778                         dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
 779                                    &i2c_bus->i2c_adap, 0x61,
 780                                    TUNER_LG_TDVS_H06XF);
 781                 }
 782                 break;
 783         case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 784                 i2c_bus = &dev->i2c_bus[1];
 785                 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 786                                                 &hauppauge_hvr1500q_config,
 787                                                 &dev->i2c_bus[0].i2c_adap);
 788                 if (fe0->dvb.frontend != NULL)
 789                         dvb_attach(xc5000_attach, fe0->dvb.frontend,
 790                                    &i2c_bus->i2c_adap,
 791                                    &hauppauge_hvr1500q_tunerconfig);
 792                 break;
 793         case CX23885_BOARD_HAUPPAUGE_HVR1500:
 794                 i2c_bus = &dev->i2c_bus[1];
 795                 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 796                                                 &hauppauge_hvr1500_config,
 797                                                 &dev->i2c_bus[0].i2c_adap);
 798                 if (fe0->dvb.frontend != NULL) {
 799                         struct dvb_frontend *fe;
 800                         struct xc2028_config cfg = {
 801                                 .i2c_adap  = &i2c_bus->i2c_adap,
 802                                 .i2c_addr  = 0x61,
 803                         };
 804                         static struct xc2028_ctrl ctl = {
 805                                 .fname       = XC2028_DEFAULT_FIRMWARE,
 806                                 .max_len     = 64,
 807                                 .demod       = XC3028_FE_OREN538,
 808                         };
 809
 810                         fe = dvb_attach(xc2028_attach,
 811                                         fe0->dvb.frontend, &cfg);
 812                         if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
 813                                 fe->ops.tuner_ops.set_config(fe, &ctl);
 814                 }
 815                 break;
 816         case CX23885_BOARD_HAUPPAUGE_HVR1200:
 817         case CX23885_BOARD_HAUPPAUGE_HVR1700:
 818                 i2c_bus = &dev->i2c_bus[0];
 819                 fe0->dvb.frontend = dvb_attach(tda10048_attach,
 820                         &hauppauge_hvr1200_config,
 821                         &i2c_bus->i2c_adap);
 822                 if (fe0->dvb.frontend != NULL) {
 823                         dvb_attach(tda829x_attach, fe0->dvb.frontend,
 824                                 &dev->i2c_bus[1].i2c_adap, 0x42,
 825                                 &tda829x_no_probe);
 826                         dvb_attach(tda18271_attach, fe0->dvb.frontend,
 827                                 0x60, &dev->i2c_bus[1].i2c_adap,
 828                                 &hauppauge_hvr1200_tuner_config);
 829                 }
 830                 break;
 831         case CX23885_BOARD_HAUPPAUGE_HVR1210:
 832                 i2c_bus = &dev->i2c_bus[0];
 833                 fe0->dvb.frontend = dvb_attach(tda10048_attach,
 834                         &hauppauge_hvr1210_config,
 835                         &i2c_bus->i2c_adap);
 836                 if (fe0->dvb.frontend != NULL) {
 837                         dvb_attach(tda18271_attach, fe0->dvb.frontend,
 838                                 0x60, &dev->i2c_bus[1].i2c_adap,
 839                                 &hauppauge_hvr1210_tuner_config);
 840                 }
 841                 break;
 842         case CX23885_BOARD_HAUPPAUGE_HVR1400:
 843                 i2c_bus = &dev->i2c_bus[0];
 844                 fe0->dvb.frontend = dvb_attach(dib7000p_attach,
 845                         &i2c_bus->i2c_adap,
 846                         0x12, &hauppauge_hvr1400_dib7000_config);
 847                 if (fe0->dvb.frontend != NULL) {
 848                         struct dvb_frontend *fe;
 849                         struct xc2028_config cfg = {
 850                                 .i2c_adap  = &dev->i2c_bus[1].i2c_adap,
 851                                 .i2c_addr  = 0x64,
 852                         };
 853                         static struct xc2028_ctrl ctl = {
 854                                 .fname   = XC3028L_DEFAULT_FIRMWARE,
 855                                 .max_len = 64,
 856                                 .demod   = XC3028_FE_DIBCOM52,
 857                                 /* This is true for all demods with
 858                                         v36 firmware? */
 859                                 .type    = XC2028_D2633,
 860                         };
 861
 862                         fe = dvb_attach(xc2028_attach,
 863                                         fe0->dvb.frontend, &cfg);
 864                         if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
 865                                 fe->ops.tuner_ops.set_config(fe, &ctl);
 866                 }
 867                 break;
 868         case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
 869                 i2c_bus = &dev->i2c_bus[port->nr - 1];
 870
 871                 fe0->dvb.frontend = dvb_attach(s5h1409_attach,
 872                                                 &dvico_s5h1409_config,
 873                                                 &i2c_bus->i2c_adap);
 874                 if (fe0->dvb.frontend == NULL)
 875                         fe0->dvb.frontend = dvb_attach(s5h1411_attach,
 876                                                         &dvico_s5h1411_config,
 877                                                         &i2c_bus->i2c_adap);
 878                 if (fe0->dvb.frontend != NULL)
 879                         dvb_attach(xc5000_attach, fe0->dvb.frontend,
 880                                    &i2c_bus->i2c_adap,
 881                                    &dvico_xc5000_tunerconfig);
 882                 break;
 883         case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
 884                 i2c_bus = &dev->i2c_bus[port->nr - 1];
 885
 886                 fe0->dvb.frontend = dvb_attach(zl10353_attach,
 887                                                &dvico_fusionhdtv_xc3028,
 888                                                &i2c_bus->i2c_adap);
 889                 if (fe0->dvb.frontend != NULL) {
 890                         struct dvb_frontend      *fe;
 891                         struct xc2028_config      cfg = {
 892                                 .i2c_adap  = &i2c_bus->i2c_adap,
 893                                 .i2c_addr  = 0x61,
 894                         };
 895                         static struct xc2028_ctrl ctl = {
 896                                 .fname       = XC2028_DEFAULT_FIRMWARE,
 897                                 .max_len     = 64,
 898                                 .demod       = XC3028_FE_ZARLINK456,
 899                         };
 900
 901                         fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
 902                                         &cfg);
 903                         if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
 904                                 fe->ops.tuner_ops.set_config(fe, &ctl);
 905                 }
 906                 break;
 907         }
 908         case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
 909         case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 910         case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 911                 i2c_bus = &dev->i2c_bus[0];
 912
 913                 fe0->dvb.frontend = dvb_attach(zl10353_attach,
 914                         &dvico_fusionhdtv_xc3028,
 915                         &i2c_bus->i2c_adap);
 916                 if (fe0->dvb.frontend != NULL) {
 917                         struct dvb_frontend      *fe;
 918                         struct xc2028_config      cfg = {
 919                                 .i2c_adap  = &dev->i2c_bus[1].i2c_adap,
 920                                 .i2c_addr  = 0x61,
 921                         };
 922                         static struct xc2028_ctrl ctl = {
 923                                 .fname       = XC2028_DEFAULT_FIRMWARE,
 924                                 .max_len     = 64,
 925                                 .demod       = XC3028_FE_ZARLINK456,
 926                         };
 927
 928                         fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
 929                                 &cfg);
 930                         if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
 931                                 fe->ops.tuner_ops.set_config(fe, &ctl);
 932                 }
 933                 break;
 934         case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
 935                 i2c_bus = &dev->i2c_bus[0];
 936
 937                 fe0->dvb.frontend = dvb_attach(zl10353_attach,
 938                                                &dvico_fusionhdtv_xc3028,
 939                                                &i2c_bus->i2c_adap);
 940                 if (fe0->dvb.frontend != NULL) {
 941                         struct dvb_frontend     *fe;
 942                         struct xc4000_config    cfg = {
 943                                 .i2c_address      = 0x61,
 944                                 .default_pm       = 0,
 945                                 .dvb_amplitude    = 134,
 946                                 .set_smoothedcvbs = 1,
 947                                 .if_khz           = 4560
 948                         };
 949
 950                         fe = dvb_attach(xc4000_attach, fe0->dvb.frontend,
 951                                         &dev->i2c_bus[1].i2c_adap, &cfg);
 952                         if (!fe) {
 953                                 printk(KERN_ERR "%s/2: xc4000 attach failed\n",
 954                                        dev->name);
 955                                 goto frontend_detach;
 956                         }
 957                 }
 958                 break;
 959         case CX23885_BOARD_TBS_6920:
 960                 i2c_bus = &dev->i2c_bus[1];
 961
 962                 fe0->dvb.frontend = dvb_attach(cx24116_attach,
 963                                         &tbs_cx24116_config,
 964                                         &i2c_bus->i2c_adap);
 965                 if (fe0->dvb.frontend != NULL)
 966                         fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
 967
 968                 break;
 969         case CX23885_BOARD_TEVII_S470:
 970                 i2c_bus = &dev->i2c_bus[1];
 971
 972                 fe0->dvb.frontend = dvb_attach(ds3000_attach,
 973                                         &tevii_ds3000_config,
 974                                         &i2c_bus->i2c_adap);
 975                 if (fe0->dvb.frontend != NULL)
 976                         fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
 977
 978                 break;
 979         case CX23885_BOARD_DVBWORLD_2005:
 980                 i2c_bus = &dev->i2c_bus[1];
 981
 982                 fe0->dvb.frontend = dvb_attach(cx24116_attach,
 983                         &dvbworld_cx24116_config,
 984                         &i2c_bus->i2c_adap);
 985                 break;
 986         case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
 987                 i2c_bus = &dev->i2c_bus[0];
 988                 switch (port->nr) {
 989                 /* port B */
 990                 case 1:
 991                         fe0->dvb.frontend = dvb_attach(stv0900_attach,
 992                                                         &netup_stv0900_config,
 993                                                         &i2c_bus->i2c_adap, 0);
 994                         if (fe0->dvb.frontend != NULL) {
 995                                 if (dvb_attach(stv6110_attach,
 996                                                 fe0->dvb.frontend,
 997                                                 &netup_stv6110_tunerconfig_a,
 998                                                 &i2c_bus->i2c_adap)) {
 999                                         if (!dvb_attach(lnbh24_attach,
1000                                                         fe0->dvb.frontend,
1001                                                         &i2c_bus->i2c_adap,
1002                                                         LNBH24_PCL | LNBH24_TTX,
1003                                                         LNBH24_TEN, 0x09))
1004                                                 printk(KERN_ERR
1005                                                         "No LNBH24 found!\n");
1006
1007                                 }
1008                         }
1009                         break;
1010                 /* port C */
1011                 case 2:
1012                         fe0->dvb.frontend = dvb_attach(stv0900_attach,
1013                                                         &netup_stv0900_config,
1014                                                         &i2c_bus->i2c_adap, 1);
1015                         if (fe0->dvb.frontend != NULL) {
1016                                 if (dvb_attach(stv6110_attach,
1017                                                 fe0->dvb.frontend,
1018                                                 &netup_stv6110_tunerconfig_b,
1019                                                 &i2c_bus->i2c_adap)) {
1020                                         if (!dvb_attach(lnbh24_attach,
1021                                                         fe0->dvb.frontend,
1022                                                         &i2c_bus->i2c_adap,
1023                                                         LNBH24_PCL | LNBH24_TTX,
1024                                                         LNBH24_TEN, 0x0a))
1025                                                 printk(KERN_ERR
1026                                                         "No LNBH24 found!\n");
1027
1028                                 }
1029                         }
1030                         break;
1031                 }
1032                 break;
1033         case CX23885_BOARD_MYGICA_X8506:
1034                 i2c_bus = &dev->i2c_bus[0];
1035                 i2c_bus2 = &dev->i2c_bus[1];
1036                 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
1037                         &mygica_x8506_lgs8gl5_config,
1038                         &i2c_bus->i2c_adap);
1039                 if (fe0->dvb.frontend != NULL) {
1040                         dvb_attach(xc5000_attach,
1041                                 fe0->dvb.frontend,
1042                                 &i2c_bus2->i2c_adap,
1043                                 &mygica_x8506_xc5000_config);
1044                 }
1045                 break;
1046         case CX23885_BOARD_MAGICPRO_PROHDTVE2:
1047                 i2c_bus = &dev->i2c_bus[0];
1048                 i2c_bus2 = &dev->i2c_bus[1];
1049                 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
1050                         &magicpro_prohdtve2_lgs8g75_config,
1051                         &i2c_bus->i2c_adap);
1052                 if (fe0->dvb.frontend != NULL) {
1053                         dvb_attach(xc5000_attach,
1054                                 fe0->dvb.frontend,
1055                                 &i2c_bus2->i2c_adap,
1056                                 &magicpro_prohdtve2_xc5000_config);
1057                 }
1058                 break;
1059         case CX23885_BOARD_HAUPPAUGE_HVR1850:
1060                 i2c_bus = &dev->i2c_bus[0];
1061                 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1062                         &hcw_s5h1411_config,
1063                         &i2c_bus->i2c_adap);
1064                 if (fe0->dvb.frontend != NULL)
1065                         dvb_attach(tda18271_attach, fe0->dvb.frontend,
1066                                 0x60, &dev->i2c_bus[0].i2c_adap,
1067                                 &hauppauge_tda18271_config);
1068
1069                 tda18271_attach(&dev->ts1.analog_fe,
1070                         0x60, &dev->i2c_bus[1].i2c_adap,
1071                         &hauppauge_tda18271_config);
1072
1073                 break;
1074         case CX23885_BOARD_HAUPPAUGE_HVR1290:
1075                 i2c_bus = &dev->i2c_bus[0];
1076                 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1077                         &hcw_s5h1411_config,
1078                         &i2c_bus->i2c_adap);
1079                 if (fe0->dvb.frontend != NULL)
1080                         dvb_attach(tda18271_attach, fe0->dvb.frontend,
1081                                 0x60, &dev->i2c_bus[0].i2c_adap,
1082                                 &hauppauge_tda18271_config);
1083                 break;
1084         case CX23885_BOARD_MYGICA_X8558PRO:
1085                 switch (port->nr) {
1086                 /* port B */
1087                 case 1:
1088                         i2c_bus = &dev->i2c_bus[0];
1089                         fe0->dvb.frontend = dvb_attach(atbm8830_attach,
1090                                 &mygica_x8558pro_atbm8830_cfg1,
1091                                 &i2c_bus->i2c_adap);
1092                         if (fe0->dvb.frontend != NULL) {
1093                                 dvb_attach(max2165_attach,
1094                                         fe0->dvb.frontend,
1095                                         &i2c_bus->i2c_adap,
1096                                         &mygic_x8558pro_max2165_cfg1);
1097                         }
1098                         break;
1099                 /* port C */
1100                 case 2:
1101                         i2c_bus = &dev->i2c_bus[1];
1102                         fe0->dvb.frontend = dvb_attach(atbm8830_attach,
1103                                 &mygica_x8558pro_atbm8830_cfg2,
1104                                 &i2c_bus->i2c_adap);
1105                         if (fe0->dvb.frontend != NULL) {
1106                                 dvb_attach(max2165_attach,
1107                                         fe0->dvb.frontend,
1108                                         &i2c_bus->i2c_adap,
1109                                         &mygic_x8558pro_max2165_cfg2);
1110                         }
1111                         break;
1112                 }
1113                 break;
1114         case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
1115                 i2c_bus = &dev->i2c_bus[0];
1116                 mfe_shared = 1;/* MFE */
1117                 port->frontends.gate = 0;/* not clear for me yet */
1118                 /* ports B, C */
1119                 /* MFE frontend 1 DVB-T */
1120                 fe0->dvb.frontend = dvb_attach(stv0367ter_attach,
1121                                         &netup_stv0367_config[port->nr - 1],
1122                                         &i2c_bus->i2c_adap);
1123                 if (fe0->dvb.frontend != NULL) {
1124                         if (NULL == dvb_attach(xc5000_attach,
1125                                         fe0->dvb.frontend,
1126                                         &i2c_bus->i2c_adap,
1127                                         &netup_xc5000_config[port->nr - 1]))
1128                                 goto frontend_detach;
1129                         /* load xc5000 firmware */
1130                         fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend);
1131                 }
1132                 /* MFE frontend 2 */
1133                 fe1 = videobuf_dvb_get_frontend(&port->frontends, 2);
1134                 if (fe1 == NULL)
1135                         goto frontend_detach;
1136                 /* DVB-C init */
1137                 fe1->dvb.frontend = dvb_attach(stv0367cab_attach,
1138                                         &netup_stv0367_config[port->nr - 1],
1139                                         &i2c_bus->i2c_adap);
1140                 if (fe1->dvb.frontend != NULL) {
1141                         fe1->dvb.frontend->id = 1;
1142                         if (NULL == dvb_attach(xc5000_attach,
1143                                         fe1->dvb.frontend,
1144                                         &i2c_bus->i2c_adap,
1145                                         &netup_xc5000_config[port->nr - 1]))
1146                                 goto frontend_detach;
1147                 }
1148                 break;
1149         case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
1150                 i2c_bus = &dev->i2c_bus[0];
1151                 i2c_bus2 = &dev->i2c_bus[1];
1152
1153                 switch (port->nr) {
1154                 /* port b */
1155                 case 1:
1156                         fe0->dvb.frontend = dvb_attach(drxk_attach,
1157                                         &terratec_drxk_config[0],
1158                                         &i2c_bus->i2c_adap);
1159                         if (fe0->dvb.frontend != NULL) {
1160                                 if (!dvb_attach(mt2063_attach,
1161                                                 fe0->dvb.frontend,
1162                                                 &terratec_mt2063_config[0],
1163                                                 &i2c_bus2->i2c_adap))
1164                                         goto frontend_detach;
1165                         }
1166                         break;
1167                 /* port c */
1168                 case 2:
1169                         fe0->dvb.frontend = dvb_attach(drxk_attach,
1170                                         &terratec_drxk_config[1],
1171                                         &i2c_bus->i2c_adap);
1172                         if (fe0->dvb.frontend != NULL) {
1173                                 if (!dvb_attach(mt2063_attach,
1174                                                 fe0->dvb.frontend,
1175                                                 &terratec_mt2063_config[1],
1176                                                 &i2c_bus2->i2c_adap))
1177                                         goto frontend_detach;
1178                         }
1179                         break;
1180                 }
1181                 break;
1182         case CX23885_BOARD_TEVII_S471:
1183                 i2c_bus = &dev->i2c_bus[1];
1184
1185                 fe0->dvb.frontend = dvb_attach(ds3000_attach,
1186                                         &tevii_ds3000_config,
1187                                         &i2c_bus->i2c_adap);
1188                 break;
1189         default:
1190                 printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
1191                         " isn't supported yet\n",
1192                        dev->name);
1193                 break;
1194         }
1195
1196         if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) {
1197                 printk(KERN_ERR "%s: frontend initialization failed\n",
1198                        dev->name);
1199                 goto frontend_detach;
1200         }
1201
1202         /* define general-purpose callback pointer */
1203         fe0->dvb.frontend->callback = cx23885_tuner_callback;
1204         if (fe1)
1205                 fe1->dvb.frontend->callback = cx23885_tuner_callback;
1206 #if 0
1207         /* Ensure all frontends negotiate bus access */
1208         fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
1209         if (fe1)
1210                 fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
1211 #endif
1212
1213         /* Put the analog decoder in standby to keep it quiet */
1214         call_all(dev, core, s_power, 0);
1215
1216         if (fe0->dvb.frontend->ops.analog_ops.standby)
1217                 fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
1218
1219         /* register everything */
1220         ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
1221                                         &dev->pci->dev, adapter_nr, mfe_shared,
1222                                         NULL);
1223         if (ret)
1224                 goto frontend_detach;
1225
1226         /* init CI & MAC */
1227         switch (dev->board) {
1228         case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
1229                 static struct netup_card_info cinfo;
1230
1231                 netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
1232                 memcpy(port->frontends.adapter.proposed_mac,
1233                                 cinfo.port[port->nr - 1].mac, 6);
1234                 printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",
1235                         port->nr, port->frontends.adapter.proposed_mac);
1236
1237                 netup_ci_init(port);
1238                 break;
1239                 }
1240         case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
1241                 struct altera_ci_config netup_ci_cfg = {
1242                         .dev = dev,/* magic number to identify*/
1243                         .adapter = &port->frontends.adapter,/* for CI */
1244                         .demux = &fe0->dvb.demux,/* for hw pid filter */
1245                         .fpga_rw = netup_altera_fpga_rw,
1246                 };
1247
1248                 altera_ci_init(&netup_ci_cfg, port->nr);
1249                 break;
1250                 }
1251         case CX23885_BOARD_TEVII_S470: {
1252                 u8 eeprom[256]; /* 24C02 i2c eeprom */
1253
1254                 if (port->nr != 1)
1255                         break;
1256
1257                 /* Read entire EEPROM */
1258                 dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
1259                 tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
1260                 printk(KERN_INFO "TeVii S470 MAC= %pM\n", eeprom + 0xa0);
1261                 memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
1262                 break;
1263                 }
1264         }
1265
1266         return ret;
1267
1268 frontend_detach:
1269         port->gate_ctrl = NULL;
1270         videobuf_dvb_dealloc_frontends(&port->frontends);
1271         return -EINVAL;
1272 }
1273
1274 int cx23885_dvb_register(struct cx23885_tsport *port)
1275 {
1276
1277         struct videobuf_dvb_frontend *fe0;
1278         struct cx23885_dev *dev = port->dev;
1279         int err, i;
1280
1281         /* Here we need to allocate the correct number of frontends,
1282          * as reflected in the cards struct. The reality is that currently
1283          * no cx23885 boards support this - yet. But, if we don't modify this
1284          * code then the second frontend would never be allocated (later)
1285          * and fail with error before the attach in dvb_register().
1286          * Without these changes we risk an OOPS later. The changes here
1287          * are for safety, and should provide a good foundation for the
1288          * future addition of any multi-frontend cx23885 based boards.
1289          */
1290         printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
1291                 port->num_frontends);
1292
1293         for (i = 1; i <= port->num_frontends; i++) {
1294                 if (videobuf_dvb_alloc_frontend(
1295                         &port->frontends, i) == NULL) {
1296                         printk(KERN_ERR "%s() failed to alloc\n", __func__);
1297                         return -ENOMEM;
1298                 }
1299
1300                 fe0 = videobuf_dvb_get_frontend(&port->frontends, i);
1301                 if (!fe0)
1302                         err = -EINVAL;
1303
1304                 dprintk(1, "%s\n", __func__);
1305                 dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n",
1306                         dev->board,
1307                         dev->name,
1308                         dev->pci_bus,
1309                         dev->pci_slot);
1310
1311                 err = -ENODEV;
1312
1313                 /* dvb stuff */
1314                 /* We have to init the queue for each frontend on a port. */
1315                 printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name);
1316                 videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops,
1317                             &dev->pci->dev, &port->slock,
1318                             V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
1319                             sizeof(struct cx23885_buffer), port, NULL);
1320         }
1321         err = dvb_register(port);
1322         if (err != 0)
1323                 printk(KERN_ERR "%s() dvb_register failed err = %d\n",
1324                         __func__, err);
1325
1326         return err;
1327 }
1328
1329 int cx23885_dvb_unregister(struct cx23885_tsport *port)
1330 {
1331         struct videobuf_dvb_frontend *fe0;
1332
1333         /* FIXME: in an error condition where the we have
1334          * an expected number of frontends (attach problem)
1335          * then this might not clean up correctly, if 1
1336          * is invalid.
1337          * This comment only applies to future boards IF they
1338          * implement MFE support.
1339          */
1340         fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
1341         if (fe0 && fe0->dvb.frontend)
1342                 videobuf_dvb_unregister_bus(&port->frontends);
1343
1344         switch (port->dev->board) {
1345         case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
1346                 netup_ci_exit(port);
1347                 break;
1348         case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
1349                 altera_ci_release(port->dev, port->nr);
1350                 break;
1351         }
1352
1353         port->gate_ctrl = NULL;
1354
1355         return 0;
1356 }
1357