2 # Generic video config states
7 depends on VIDEO_DEV && VIDEO_V4L2_COMMON
8 default VIDEO_DEV && VIDEO_V4L2_COMMON
12 depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
13 default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
18 config VIDEOBUF_DMA_SG
23 config VIDEOBUF_VMALLOC
27 config VIDEOBUF_DMA_CONTIG
50 depends on MEDIA_TUNER
53 # Multimedia Video device configuration
56 menuconfig VIDEO_CAPTURE_DRIVERS
57 bool "Video capture adapters"
61 Say Y here to enable selecting the video adapters for
62 webcams, analog TV, and hybrid analog/digital TV.
63 Some of those devices also supports FM radio.
65 if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
67 config VIDEO_ADV_DEBUG
68 bool "Enable advanced debug functionality"
71 Say Y here to enable advanced debugging functionality on some
75 config VIDEO_FIXED_MINOR_RANGES
76 bool "Enable old-style fixed minor ranges for video devices"
79 Say Y here to enable the old-style fixed-range minor assignments.
80 Only useful if you rely on the old behavior and use mknod instead of udev.
84 config VIDEO_HELPER_CHIPS_AUTO
85 bool "Autoselect pertinent encoders/decoders and other helper chips"
88 Most video cards may require additional modules to encode or
89 decode audio/video standards. This option will autoselect
90 all pertinent modules to each selected video module.
92 Unselect this only if you know exactly what you are doing, since
93 it may break support on some boards.
98 tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
99 depends on I2C && VIDEO_IR
102 Most boards have an IR chip directly connected via GPIO. However,
103 some video boards have the IR connected via I2C bus.
105 If your board doesn't have an I2C IR chip, you may disable this
111 # Encoder / Decoder module configuration
114 menu "Encoders/decoders and other helper chips"
115 depends on !VIDEO_HELPER_CHIPS_AUTO
117 comment "Audio decoders"
120 tristate "Simple audio decoder chips"
121 depends on VIDEO_V4L2 && I2C
123 Support for several audio decoder chips found on some bt8xx boards:
124 Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
125 tea6320, tea6420, tda8425, ta8874z.
126 Microchip: pic16c54 based design on ProVideo PV951 board.
128 To compile this driver as a module, choose M here: the
129 module will be called tvaudio.
132 tristate "Philips TDA7432 audio processor"
133 depends on VIDEO_V4L2 && I2C
135 Support for tda7432 audio decoder chip found on some bt8xx boards.
137 To compile this driver as a module, choose M here: the
138 module will be called tda7432.
141 tristate "Philips TDA9840 audio processor"
144 Support for tda9840 audio decoder chip found on some Zoran boards.
146 To compile this driver as a module, choose M here: the
147 module will be called tda9840.
150 tristate "Philips TDA9875 audio processor"
151 depends on VIDEO_V4L2 && I2C
153 Support for tda9875 audio decoder chip found on some bt8xx boards.
155 To compile this driver as a module, choose M here: the
156 module will be called tda9875.
158 config VIDEO_TEA6415C
159 tristate "Philips TEA6415C audio processor"
162 Support for tea6415c audio decoder chip found on some bt8xx boards.
164 To compile this driver as a module, choose M here: the
165 module will be called tea6415c.
168 tristate "Philips TEA6420 audio processor"
171 Support for tea6420 audio decoder chip found on some bt8xx boards.
173 To compile this driver as a module, choose M here: the
174 module will be called tea6420.
177 tristate "Micronas MSP34xx audio decoders"
178 depends on VIDEO_V4L2 && I2C
180 Support for the Micronas MSP34xx series of audio decoders.
182 To compile this driver as a module, choose M here: the
183 module will be called msp3400.
186 tristate "Cirrus Logic CS5345 audio ADC"
187 depends on VIDEO_V4L2 && I2C
189 Support for the Cirrus Logic CS5345 24-bit, 192 kHz
190 stereo A/D converter.
192 To compile this driver as a module, choose M here: the
193 module will be called cs5345.
195 config VIDEO_CS53L32A
196 tristate "Cirrus Logic CS53L32A audio ADC"
197 depends on VIDEO_V4L2 && I2C
199 Support for the Cirrus Logic CS53L32A low voltage
200 stereo A/D converter.
202 To compile this driver as a module, choose M here: the
203 module will be called cs53l32a.
206 tristate "Mitsubishi M52790 A/V switch"
207 depends on VIDEO_V4L2 && I2C
209 Support for the Mitsubishi M52790 A/V switch.
211 To compile this driver as a module, choose M here: the
212 module will be called m52790.
214 config VIDEO_TLV320AIC23B
215 tristate "Texas Instruments TLV320AIC23B audio codec"
216 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
218 Support for the Texas Instruments TLV320AIC23B audio codec.
220 To compile this driver as a module, choose M here: the
221 module will be called tlv320aic23b.
224 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
225 depends on VIDEO_V4L2 && I2C
227 Support for the Wolfson Microelectronics WM8775 high
228 performance stereo A/D Converter with a 4 channel input mixer.
230 To compile this driver as a module, choose M here: the
231 module will be called wm8775.
234 tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
235 depends on VIDEO_V4L2 && I2C
237 Support for the Wolfson Microelectronics WM8739
238 stereo A/D Converter.
240 To compile this driver as a module, choose M here: the
241 module will be called wm8739.
243 config VIDEO_VP27SMPX
244 tristate "Panasonic VP27s internal MPX"
245 depends on VIDEO_V4L2 && I2C
247 Support for the internal MPX of the Panasonic VP27s tuner.
249 To compile this driver as a module, choose M here: the
250 module will be called vp27smpx.
252 comment "RDS decoders"
255 tristate "SAA6588 Radio Chip RDS decoder support"
256 depends on VIDEO_V4L2 && I2C
259 Support for this Radio Data System (RDS) decoder. This allows
260 seeing radio station identification transmitted using this
263 To compile this driver as a module, choose M here: the
264 module will be called saa6588.
266 comment "Video decoders"
269 tristate "Analog Devices ADV7180 decoder"
270 depends on VIDEO_V4L2 && I2C
272 Support for the Analog Devices ADV7180 video decoder.
274 To compile this driver as a module, choose M here: the
275 module will be called adv7180.
278 tristate "BT819A VideoStream decoder"
279 depends on VIDEO_V4L2 && I2C
281 Support for BT819A video decoder.
283 To compile this driver as a module, choose M here: the
284 module will be called bt819.
287 tristate "BT856 VideoStream decoder"
288 depends on VIDEO_V4L2 && I2C
290 Support for BT856 video decoder.
292 To compile this driver as a module, choose M here: the
293 module will be called bt856.
296 tristate "BT866 VideoStream decoder"
297 depends on VIDEO_V4L2 && I2C
299 Support for BT866 video decoder.
301 To compile this driver as a module, choose M here: the
302 module will be called bt866.
305 tristate "KS0127 video decoder"
306 depends on VIDEO_V4L2 && I2C
308 Support for KS0127 video decoder.
310 This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
313 To compile this driver as a module, choose M here: the
314 module will be called ks0127.
317 tristate "OmniVision OV7670 sensor support"
318 depends on I2C && VIDEO_V4L2
320 This is a Video4Linux2 sensor-level driver for the OmniVision
321 OV7670 VGA camera. It currently only works with the M88ALP01
325 tristate "Micron mt9v011 sensor support"
326 depends on I2C && VIDEO_V4L2
328 This is a Video4Linux2 sensor-level driver for the Micron
329 mt0v011 1.3 Mpixel camera. It currently only works with the
333 tristate "TCM825x camera sensor support"
334 depends on I2C && VIDEO_V4L2
336 This is a driver for the Toshiba TCM825x VGA camera sensor.
337 It is used for example in Nokia N800.
340 tristate "Philips SAA7110 video decoder"
341 depends on VIDEO_V4L2 && I2C
343 Support for the Philips SAA7110 video decoders.
345 To compile this driver as a module, choose M here: the
346 module will be called saa7110.
349 tristate "Philips SAA7111/3/4/5 video decoders"
350 depends on VIDEO_V4L2 && I2C
352 Support for the Philips SAA7111/3/4/5 video decoders.
354 To compile this driver as a module, choose M here: the
355 module will be called saa7115.
358 tristate "Philips SAA7171/3/4 audio/video decoders"
359 depends on VIDEO_V4L2 && I2C
361 Support for the Philips SAA7171/3/4 audio/video decoders.
363 To compile this driver as a module, choose M here: the
364 module will be called saa717x.
367 tristate "Philips SAA7191 video decoder"
368 depends on VIDEO_V4L1 && I2C
370 Support for the Philips SAA7191 video decoder.
372 To compile this driver as a module, choose M here: the
373 module will be called saa7191.
376 tristate "Texas Instruments TVP514x video decoder"
377 depends on VIDEO_V4L2 && I2C
379 This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
380 decoder. It is currently working with the TI OMAP3 camera
383 To compile this driver as a module, choose M here: the
384 module will be called tvp514x.
387 tristate "Texas Instruments TVP5150 video decoder"
388 depends on VIDEO_V4L2 && I2C
390 Support for the Texas Instruments TVP5150 video decoder.
392 To compile this driver as a module, choose M here: the
393 module will be called tvp5150.
396 tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
397 depends on VIDEO_V4L2 && I2C
399 Support for VPX322x video decoders.
401 To compile this driver as a module, choose M here: the
402 module will be called vpx3220.
404 comment "Video and audio decoders"
406 source "drivers/media/video/cx25840/Kconfig"
408 comment "MPEG video encoders"
411 tristate "Conexant CX2341x MPEG encoders"
412 depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
414 Support for the Conexant CX23416 MPEG encoders
415 and CX23415 MPEG encoder/decoders.
417 This module currently supports the encoding functions only.
419 To compile this driver as a module, choose M here: the
420 module will be called cx2341x.
422 comment "Video encoders"
425 tristate "Philips SAA7127/9 digital video encoders"
426 depends on VIDEO_V4L2 && I2C
428 Support for the Philips SAA7127/9 digital video encoders.
430 To compile this driver as a module, choose M here: the
431 module will be called saa7127.
434 tristate "Philips SAA7185 video encoder"
435 depends on VIDEO_V4L2 && I2C
437 Support for the Philips SAA7185 video encoder.
439 To compile this driver as a module, choose M here: the
440 module will be called saa7185.
443 tristate "Analog Devices ADV7170 video encoder"
444 depends on VIDEO_V4L2 && I2C
446 Support for the Analog Devices ADV7170 video encoder driver
448 To compile this driver as a module, choose M here: the
449 module will be called adv7170.
452 tristate "Analog Devices ADV7175 video encoder"
453 depends on VIDEO_V4L2 && I2C
455 Support for the Analog Devices ADV7175 video encoder driver
457 To compile this driver as a module, choose M here: the
458 module will be called adv7175.
461 tristate "THS7303 Video Amplifier"
464 Support for TI THS7303 video amplifier
466 To compile this driver as a module, choose M here: the
467 module will be called ths7303.
470 tristate "ADV7343 video encoder"
473 Support for Analog Devices I2C bus based ADV7343 encoder.
475 To compile this driver as a module, choose M here: the
476 module will be called adv7343.
478 comment "Video improvement chips"
480 config VIDEO_UPD64031A
481 tristate "NEC Electronics uPD64031A Ghost Reduction"
482 depends on VIDEO_V4L2 && I2C
484 Support for the NEC Electronics uPD64031A Ghost Reduction
485 video chip. It is most often found in NTSC TV cards made for
486 Japan and is used to reduce the 'ghosting' effect that can
487 be present in analog TV broadcasts.
489 To compile this driver as a module, choose M here: the
490 module will be called upd64031a.
492 config VIDEO_UPD64083
493 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
494 depends on VIDEO_V4L2 && I2C
496 Support for the NEC Electronics uPD64083 3-Dimensional Y/C
497 separation video chip. It is used to improve the quality of
498 the colors of a composite signal.
500 To compile this driver as a module, choose M here: the
501 module will be called upd64083.
503 endmenu # encoder / decoder chips
505 config DISPLAY_DAVINCI_DM646X_EVM
506 tristate "DM646x EVM Video Display"
507 depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
508 select VIDEOBUF_DMA_CONTIG
509 select VIDEO_DAVINCI_VPIF
513 Support for DM6467 based display device.
515 To compile this driver as a module, choose M here: the
516 module will be called vpif_display.
518 config CAPTURE_DAVINCI_DM646X_EVM
519 tristate "DM646x EVM Video Capture"
520 depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
521 select VIDEOBUF_DMA_CONTIG
522 select VIDEO_DAVINCI_VPIF
524 Support for DM6467 based capture device.
526 To compile this driver as a module, choose M here: the
527 module will be called vpif_capture.
529 config VIDEO_DAVINCI_VPIF
530 tristate "DaVinci VPIF Driver"
531 depends on DISPLAY_DAVINCI_DM646X_EVM
533 Support for DaVinci VPIF Driver.
535 To compile this driver as a module, choose M here: the
536 module will be called vpif.
539 tristate "Virtual Video Driver"
540 depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
541 select VIDEOBUF_VMALLOC
544 Enables a virtual video driver. This device shows a color bar
545 and a timestamp, as a real device would generate by using V4L2
547 Say Y here if you want to test video apps or debug V4L devices.
550 config VIDEO_VPSS_SYSTEM
551 tristate "VPSS System module driver"
552 depends on ARCH_DAVINCI
554 Support for vpss system module for video driver
557 config VIDEO_VPFE_CAPTURE
558 tristate "VPFE Video Capture Driver"
559 depends on VIDEO_V4L2 && ARCH_DAVINCI
560 select VIDEOBUF_DMA_CONTIG
562 Support for DMXXXX VPFE based frame grabber. This is the
563 common V4L2 module for following DMXXX SoCs from Texas
564 Instruments:- DM6446 & DM355.
566 To compile this driver as a module, choose M here: the
567 module will be called vpfe-capture.
569 config VIDEO_DM6446_CCDC
570 tristate "DM6446 CCDC HW module"
571 depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
572 select VIDEO_VPSS_SYSTEM
575 Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
576 with decoder modules such as TVP5146 over BT656 or
577 sensor module such as MT9T001 over a raw interface. This
578 module configures the interface and CCDC/ISIF to do
579 video frame capture from slave decoders.
581 To compile this driver as a module, choose M here: the
582 module will be called vpfe.
584 config VIDEO_DM355_CCDC
585 tristate "DM355 CCDC HW module"
586 depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
587 select VIDEO_VPSS_SYSTEM
590 Enables DM355 CCD hw module. DM355 CCDC hw interfaces
591 with decoder modules such as TVP5146 over BT656 or
592 sensor module such as MT9T001 over a raw interface. This
593 module configures the interface and CCDC/ISIF to do
594 video frame capture from a slave decoders
596 To compile this driver as a module, choose M here: the
597 module will be called vpfe.
599 source "drivers/media/video/bt8xx/Kconfig"
602 tristate "Mediavision Pro Movie Studio Video For Linux"
603 depends on ISA && VIDEO_V4L1
605 Say Y if you have such a thing.
607 To compile this driver as a module, choose M here: the
608 module will be called pms.
611 tristate "Quickcam BW Video For Linux"
612 depends on PARPORT && VIDEO_V4L1
614 Say Y have if you the black and white version of the QuickCam
615 camera. See the next option for the color version.
617 To compile this driver as a module, choose M here: the
618 module will be called bw-qcam.
621 tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
622 depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
624 This is the video4linux driver for the colour version of the
625 Connectix QuickCam. If you have one of these cameras, say Y here,
626 otherwise say N. This driver does not work with the original
627 monochrome QuickCam, QuickCam VC or QuickClip. It is also available
628 as a module (c-qcam).
629 Read <file:Documentation/video4linux/CQcam.txt> for more information.
632 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
633 depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
635 Video4linux driver for Winbond's w9966 based Webcams.
636 Currently tested with the LifeView FlyCam Supra.
637 If you have one of these cameras, say Y here
639 This driver is also available as a module (w9966).
641 Check out <file:Documentation/video4linux/w9966.txt> for more
645 tristate "CPiA Video For Linux"
646 depends on VIDEO_V4L1
648 This is the video4linux driver for cameras based on Vision's CPiA
649 (Colour Processor Interface ASIC), such as the Creative Labs Video
650 Blaster Webcam II. If you have one of these cameras, say Y here
651 and select parallel port and/or USB lowlevel support below,
652 otherwise say N. This will not work with the Creative Webcam III.
654 Please read <file:Documentation/video4linux/README.cpia> for more
657 This driver is also available as a module (cpia).
660 tristate "CPiA Parallel Port Lowlevel Support"
661 depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
663 This is the lowlevel parallel port support for cameras based on
664 Vision's CPiA (Colour Processor Interface ASIC), such as the
665 Creative Webcam II. If you have the parallel port version of one
666 of these cameras, say Y here, otherwise say N. It is also available
667 as a module (cpia_pp).
669 config VIDEO_CPIA_USB
670 tristate "CPiA USB Lowlevel Support"
671 depends on VIDEO_CPIA && USB
673 This is the lowlevel USB support for cameras based on Vision's CPiA
674 (Colour Processor Interface ASIC), such as the Creative Webcam II.
675 If you have the USB version of one of these cameras, say Y here,
676 otherwise say N. This will not work with the Creative Webcam III.
677 It is also available as a module (cpia_usb).
679 source "drivers/media/video/cpia2/Kconfig"
681 config VIDEO_SAA5246A
682 tristate "SAA5246A, SAA5281 Teletext processor"
683 depends on I2C && VIDEO_V4L2
685 Support for I2C bus based teletext using the SAA5246A or SAA5281
686 chip. Useful only if you live in Europe.
688 To compile this driver as a module, choose M here: the
689 module will be called saa5246a.
692 tristate "SAA5249 Teletext processor"
693 depends on I2C && VIDEO_V4L2
695 Support for I2C bus based teletext using the SAA5249 chip. At the
696 moment this is only useful on some European WinTV cards.
698 To compile this driver as a module, choose M here: the
699 module will be called saa5249.
702 tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
703 depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
704 select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
706 Say Y here to build in support for the Vino video input system found
707 on SGI Indy machines.
710 tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
711 depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
713 Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
714 driver for PCI. There is a product page at
715 <http://www.stradis.com/>.
717 source "drivers/media/video/zoran/Kconfig"
720 tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
721 depends on PCI && SONY_LAPTOP && VIDEO_V4L1
723 This is the video4linux driver for the Motion Eye camera found
724 in the Vaio Picturebook laptops. Please read the material in
725 <file:Documentation/video4linux/meye.txt> for more information.
727 If you say Y or M here, you need to say Y or M to "Sony Laptop
728 Extras" in the misc device section.
730 To compile this driver as a module, choose M here: the
731 module will be called meye.
733 source "drivers/media/video/saa7134/Kconfig"
736 tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
737 depends on PCI && VIDEO_V4L1 && I2C
738 select VIDEO_SAA7146_VV
740 select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
741 select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
742 select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
743 select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
745 This is a video4linux driver for the 'Multimedia eXtension Board'
746 TV card by Siemens-Nixdorf.
748 To compile this driver as a module, choose M here: the
749 module will be called mxb.
751 config VIDEO_HEXIUM_ORION
752 tristate "Hexium HV-PCI6 and Orion frame grabber"
753 depends on PCI && VIDEO_V4L2 && I2C
754 select VIDEO_SAA7146_VV
756 This is a video4linux driver for the Hexium HV-PCI6 and
757 Orion frame grabber cards by Hexium.
759 To compile this driver as a module, choose M here: the
760 module will be called hexium_orion.
762 config VIDEO_HEXIUM_GEMINI
763 tristate "Hexium Gemini frame grabber"
764 depends on PCI && VIDEO_V4L2 && I2C
765 select VIDEO_SAA7146_VV
767 This is a video4linux driver for the Hexium Gemini frame
768 grabber card by Hexium. Please note that the Gemini Dual
769 card is *not* fully supported.
771 To compile this driver as a module, choose M here: the
772 module will be called hexium_gemini.
774 source "drivers/media/video/cx88/Kconfig"
776 source "drivers/media/video/cx23885/Kconfig"
778 source "drivers/media/video/au0828/Kconfig"
780 source "drivers/media/video/ivtv/Kconfig"
782 source "drivers/media/video/cx18/Kconfig"
784 source "drivers/media/video/saa7164/Kconfig"
787 tristate "AR devices"
788 depends on M32R && VIDEO_V4L1
790 This is a video4linux driver for the Renesas AR (Artificial Retina)
793 config VIDEO_M32R_AR_M64278
794 tristate "AR device with color module M64278(VGA)"
795 depends on PLAT_M32700UT
798 This is a video4linux driver for the Renesas AR (Artificial
799 Retina) with M64278E-800 camera module.
800 This module supports VGA(640x480 pixels) resolutions.
802 To compile this driver as a module, choose M here: the
803 module will be called arv.
805 config VIDEO_CAFE_CCIC
806 tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
807 depends on PCI && I2C && VIDEO_V4L2
810 This is a video4linux2 driver for the Marvell 88ALP01 integrated
811 CMOS camera controller. This is the controller found on first-
812 generation OLPC systems.
815 tristate "SoC camera support"
816 depends on VIDEO_V4L2 && HAS_DMA && I2C
819 SoC Camera is a common API to several cameras, not connecting
820 over a bus like PCI or USB. For example some i2c camera connected
821 directly to the data bus of an SoC.
823 config SOC_CAMERA_MT9M001
824 tristate "mt9m001 support"
825 depends on SOC_CAMERA && I2C
826 select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
828 This driver supports MT9M001 cameras from Micron, monochrome
831 config SOC_CAMERA_MT9M111
832 tristate "mt9m111 and mt9m112 support"
833 depends on SOC_CAMERA && I2C
835 This driver supports MT9M111 and MT9M112 cameras from Micron
837 config SOC_CAMERA_MT9T031
838 tristate "mt9t031 support"
839 depends on SOC_CAMERA && I2C
841 This driver supports MT9T031 cameras from Micron.
843 config SOC_CAMERA_MT9V022
844 tristate "mt9v022 support"
845 depends on SOC_CAMERA && I2C
846 select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
848 This driver supports MT9V022 cameras from Micron
850 config SOC_CAMERA_TW9910
851 tristate "tw9910 support"
852 depends on SOC_CAMERA && I2C
854 This is a tw9910 video driver
856 config SOC_CAMERA_PLATFORM
857 tristate "platform camera support"
858 depends on SOC_CAMERA
860 This is a generic SoC camera platform driver, useful for testing
862 config SOC_CAMERA_OV772X
863 tristate "ov772x camera support"
864 depends on SOC_CAMERA && I2C
866 This is a ov772x camera driver
867 config SOC_CAMERA_OV7675
868 tristate "ov7675 camera support"
869 depends on SOC_CAMERA && I2C
871 This is a ov7675 camera driver
872 config SOC_CAMERA_OV2655
873 tristate "ov2655 camera support"
874 depends on SOC_CAMERA && I2C
876 This is a ov2655 camera driver
877 config SOC_CAMERA_OV2659
878 tristate "ov2659 camera support"
879 depends on SOC_CAMERA && I2C
881 This is a ov2659 camera driver
882 config SOC_CAMERA_OV9650
883 tristate "ov9650 camera support"
884 depends on SOC_CAMERA && I2C
886 This is a ov2655 camera driver
887 config SOC_CAMERA_OV3640
888 tristate "ov3640 camera support"
889 depends on SOC_CAMERA && I2C
891 This is a ov3640 camera driver
893 config SOC_CAMERA_OV5642
894 tristate "ov5642 camera support"
895 depends on SOC_CAMERA && I2C
897 This is a ov5642 camera driver
899 config SOC_CAMERA_S5K6AA
900 tristate "Samsung S5K6AA MIPI CSI-2 (importek mu736asa)"
901 depends on SOC_CAMERA && I2C
903 This is a samsung S5K6AA mobile camera driver
905 prompt "OV5642 Module Focus select"
906 depends on SOC_CAMERA_OV5642
907 default OV5642_AUTOFOCUS
910 config OV5642_AUTOFOCUS
911 bool "OV5642 auto focus"
913 config OV5642_FIXEDFOCUS
914 bool "OV5642 fixed focus"
922 tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
923 depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
925 select VIDEOBUF_DMA_CONTIG
928 This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
934 tristate "i.MX3x Camera Sensor Interface driver"
935 depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
936 select VIDEOBUF_DMA_CONTIG
939 This is a v4l2 driver for the i.MX3x Camera Sensor Interface
942 tristate "PXA27x Quick Capture Interface driver"
943 depends on VIDEO_DEV && PXA27x && SOC_CAMERA
944 select VIDEOBUF_DMA_SG
946 This is a v4l2 driver for the PXA27x Quick Capture Interface
948 config VIDEO_SH_MOBILE_CEU
949 tristate "SuperH Mobile CEU Interface driver"
950 depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
951 select VIDEOBUF_DMA_CONTIG
953 This is a v4l2 driver for the SuperH Mobile CEU Interface
956 tristate "OMAP2 Camera Capture Interface driver"
957 depends on VIDEO_DEV && ARCH_OMAP2
958 select VIDEOBUF_DMA_SG
960 This is a v4l2 driver for the TI OMAP2 camera capture interface
964 tristate "RK2818 Camera Sensor Interface driver"
965 depends on VIDEO_DEV && ARCH_RK2818 && SOC_CAMERA && HAS_DMA
966 select VIDEOBUF_DMA_CONTIG
968 This is a v4l2 driver for the RK2818 Camera Sensor Interface
971 tristate "RK29XX Camera Sensor Interface driver"
972 depends on VIDEO_DEV && ARCH_RK29 && SOC_CAMERA && HAS_DMA
973 select VIDEOBUF_DMA_CONTIG
975 This is a v4l2 driver for the RK29XX Camera Sensor Interface
977 prompt "RK29XX Camera Sensor Interface Work Mode"
978 depends on VIDEO_RK29
979 default VIDEO_RK29_WORK_ONEFRAME
981 RK29 Camera Sensor Interface(VIP) can work in 2 modes, ie:OneFrame,PingPong.
982 config VIDEO_RK29_WORK_ONEFRAME
983 bool "VIP OneFrame Mode"
985 config VIDEO_RK29_WORK_PINGPONG
986 bool "VIP PingPong Mode"
989 prompt "RK29XX camera sensor interface work with IPP "
990 depends on VIDEO_RK29 && RK29_IPP
991 default VIDEO_RK29_WORK_IPP
993 RK29 Camera Sensor Interface(VIP) can work with IPP or not IPP
994 config VIDEO_RK29_WORK_IPP
995 bool "VIP work with IPP"
997 config VIDEO_RK29_WORK_NOT_IPP
998 bool "VIP don't work with IPP"
1002 # USB Multimedia device configuration
1005 menuconfig V4L_USB_DRIVERS
1006 bool "V4L USB devices"
1010 if V4L_USB_DRIVERS && USB
1012 source "drivers/media/video/uvc/Kconfig"
1014 source "drivers/media/video/gspca/Kconfig"
1016 source "drivers/media/video/pvrusb2/Kconfig"
1018 source "drivers/media/video/hdpvr/Kconfig"
1020 source "drivers/media/video/em28xx/Kconfig"
1022 source "drivers/media/video/cx231xx/Kconfig"
1024 source "drivers/media/video/usbvision/Kconfig"
1026 source "drivers/media/video/usbvideo/Kconfig"
1028 source "drivers/media/video/et61x251/Kconfig"
1030 config VIDEO_OVCAMCHIP
1031 tristate "OmniVision Camera Chip support"
1032 depends on I2C && VIDEO_V4L1
1034 Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
1035 This driver is intended to be used with the ov511 and w9968cf USB
1038 To compile this driver as a module, choose M here: the
1039 module will be called ovcamchip.
1042 tristate "USB W996[87]CF JPEG Dual Mode Camera support"
1043 depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
1045 Say Y here if you want support for cameras based on OV681 or
1046 Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
1048 This driver has an optional plugin, which is distributed as a
1049 separate module only (released under GPL). It allows to use higher
1050 resolutions and framerates, but cannot be included in the official
1051 Linux kernel for performance purposes.
1053 See <file:Documentation/video4linux/w9968cf.txt> for more info.
1055 To compile this driver as a module, choose M here: the
1056 module will be called w9968cf.
1059 tristate "USB OV511 Camera support (DEPRECATED)"
1060 depends on VIDEO_V4L1
1062 This driver is DEPRECATED please use the gspca ov519 module
1063 instead. Note that for the ov511 / ov518 support of the gspca module
1064 you need atleast version 0.6.0 of libv4l.
1066 Say Y here if you want to connect this type of camera to your
1067 computer's USB port. See <file:Documentation/video4linux/ov511.txt>
1068 for more information and for a list of supported cameras.
1070 To compile this driver as a module, choose M here: the
1071 module will be called ov511.
1074 tristate "USB SE401 Camera support"
1075 depends on VIDEO_V4L1
1077 Say Y here if you want to connect this type of camera to your
1078 computer's USB port. See <file:Documentation/video4linux/se401.txt>
1079 for more information and for a list of supported cameras.
1081 To compile this driver as a module, choose M here: the
1082 module will be called se401.
1084 source "drivers/media/video/sn9c102/Kconfig"
1086 tristate "USB STV680 (Pencam) Camera support"
1087 depends on VIDEO_V4L1
1089 Say Y here if you want to connect this type of camera to your
1090 computer's USB port. This includes the Pencam line of cameras.
1091 See <file:Documentation/video4linux/stv680.txt> for more information
1092 and for a list of supported cameras.
1094 To compile this driver as a module, choose M here: the
1095 module will be called stv680.
1097 source "drivers/media/video/zc0301/Kconfig"
1099 source "drivers/media/video/pwc/Kconfig"
1102 tristate "USB ZR364XX Camera support"
1103 depends on VIDEO_V4L2
1105 select VIDEOBUF_VMALLOC
1107 Say Y here if you want to connect this type of camera to your
1108 computer's USB port.
1109 See <file:Documentation/video4linux/zr364xx.txt> for more info
1110 and list of supported cameras.
1112 To compile this driver as a module, choose M here: the
1113 module will be called zr364xx.
1115 config USB_STKWEBCAM
1116 tristate "USB Syntek DC1125 Camera support"
1117 depends on VIDEO_V4L2 && EXPERIMENTAL
1119 Say Y here if you want to use this type of camera.
1120 Supported devices are typically found in some Asus laptops,
1121 with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
1122 may be supported by the stk11xx driver, from which this is
1123 derived, see http://stk11xx.sourceforge.net
1125 To compile this driver as a module, choose M here: the
1126 module will be called stkwebcam.
1129 tristate "USB Sensoray 2255 video capture device"
1130 depends on VIDEO_V4L2
1131 select VIDEOBUF_VMALLOC
1134 Say Y here if you want support for the Sensoray 2255 USB device.
1135 This driver can be compiled as a module, called s2255drv.
1137 endif # V4L_USB_DRIVERS
1138 endif # VIDEO_CAPTURE_DRIVERS