2 # Multimedia Video device configuration
5 menuconfig RADIO_ADAPTERS
10 Say Y here to enable selecting AM/FM radio adapters.
12 if RADIO_ADAPTERS && VIDEO_V4L2
15 bool "Silicon Labs Si470x FM Radio Receiver support"
18 source "drivers/media/radio/si470x/Kconfig"
21 tristate "AverMedia MR 800 USB FM radio support"
22 depends on USB && VIDEO_V4L2
24 Say Y here if you want to connect this type of radio to your
25 computer's USB port. Note that the audio is not digital, and
26 you must connect the line out connector to a sound card or a
29 To compile this driver as a module, choose M here: the
30 module will be called radio-mr800.
33 tristate "D-Link/GemTek USB FM radio support"
34 depends on USB && VIDEO_V4L2
36 Say Y here if you want to connect this type of radio to your
37 computer's USB port. Note that the audio is not digital, and
38 you must connect the line out connector to a sound card or a
41 To compile this driver as a module, choose M here: the
42 module will be called dsbr100.
44 config RADIO_MAXIRADIO
45 tristate "Guillemot MAXI Radio FM 2000 radio"
46 depends on VIDEO_V4L2 && PCI && SND
48 Choose Y here if you have this radio card. This card may also be
49 found as Gemtek PCI FM.
51 In order to control your radio card, you will need to use programs
52 that are compatible with the Video For Linux API. Information on
53 this API and pointers to "v4l" programs may be found at
54 <file:Documentation/video4linux/API.html>.
56 To compile this driver as a module, choose M here: the
57 module will be called radio-maxiradio.
61 tristate "I2C driver for Silicon Labs Si4713 device"
62 depends on I2C && VIDEO_V4L2
64 Say Y here if you want support to Si4713 I2C device.
65 This device driver supports only i2c bus.
67 To compile this driver as a module, choose M here: the
68 module will be called si4713.
71 tristate "Silicon Labs Si4713 FM Radio Transmitter support"
72 depends on I2C && VIDEO_V4L2
75 Say Y here if you want support to Si4713 FM Radio Transmitter.
76 This device can transmit audio through FM. It can transmit
77 RDS and RBDS signals as well. This module is the v4l2 radio
78 interface for the i2c driver of this device.
80 To compile this driver as a module, choose M here: the
81 module will be called radio-si4713.
84 tristate "Keene FM Transmitter USB support"
85 depends on USB && VIDEO_V4L2
87 Say Y here if you want to connect this type of FM transmitter
88 to your computer's USB port.
90 To compile this driver as a module, choose M here: the
91 module will be called radio-keene.
94 tristate "TEA5764 I2C FM radio support"
95 depends on I2C && VIDEO_V4L2
97 Say Y here if you want to use the TEA5764 FM chip found in
98 EZX phones. This FM chip is present in EZX phones from Motorola,
99 connected to internal pxa I2C bus.
101 To compile this driver as a module, choose M here: the
102 module will be called radio-tea5764.
104 config RADIO_TEA5764_XTAL
105 bool "TEA5764 crystal reference"
106 depends on RADIO_TEA5764=y
109 Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
110 here if TEA5764 reference frequency is connected in FREQIN.
112 config RADIO_SAA7706H
113 tristate "SAA7706H Car Radio DSP"
114 depends on I2C && VIDEO_V4L2
116 Say Y here if you want to use the SAA7706H Car radio Digital
117 Signal Processor, found for instance on the Russellville development
118 board. On the russellville the device is connected to internal
121 To compile this driver as a module, choose M here: the
122 module will be called SAA7706H.
125 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
126 depends on I2C && VIDEO_V4L2
128 Say Y here if you want to use the TEF6862 Car Radio Enhanced
129 Selectivity Tuner, found for instance on the Russellville development
130 board. On the russellville the device is connected to internal
133 To compile this driver as a module, choose M here: the
134 module will be called TEF6862.
136 config RADIO_TIMBERDALE
137 tristate "Enable the Timberdale radio driver"
138 depends on MFD_TIMBERDALE && VIDEO_V4L2
139 depends on I2C # for RADIO_SAA7706H
141 select RADIO_SAA7706H
143 This is a kind of umbrella driver for the Radio Tuner and DSP
144 found behind the Timberdale FPGA on the Russellville board.
145 Enabling this driver will automatically select the DSP and tuner.
148 tristate "Texas Instruments WL1273 I2C FM Radio"
149 depends on I2C && VIDEO_V4L2
151 select MFD_WL1273_CORE
154 Choose Y here if you have this FM radio chip.
156 In order to control your radio card, you will need to use programs
157 that are compatible with the Video For Linux 2 API. Information on
158 this API and pointers to "v4l2" programs may be found at
159 <file:Documentation/video4linux/API.html>.
161 To compile this driver as a module, choose M here: the
162 module will be called radio-wl1273.
164 # TI's ST based wl128x FM radio
165 source "drivers/media/radio/wl128x/Kconfig"
168 # ISA drivers configuration
171 menuconfig V4L_RADIO_ISA_DRIVERS
172 bool "ISA radio devices"
176 Say Y here to enable support for these ISA drivers.
178 if V4L_RADIO_ISA_DRIVERS
185 tristate "ADS Cadet AM/FM Tuner"
186 depends on ISA && VIDEO_V4L2
188 Choose Y here if you have one of these AM/FM radio cards, and then
189 fill in the port address below.
191 To compile this driver as a module, choose M here: the
192 module will be called radio-cadet.
195 tristate "AIMSlab RadioTrack (aka RadioReveal) support"
196 depends on ISA && VIDEO_V4L2
199 Choose Y here if you have one of these FM radio cards, and then fill
200 in the port address below.
202 Note that newer AIMSlab RadioTrack cards have a different chipset
203 and are not supported by this driver. For these cards, use the
204 RadioTrack II driver below.
206 If you have a GemTeks combined (PnP) sound- and radio card you must
207 use this driver as a module and setup the card with isapnptools.
208 You must also pass the module a suitable io parameter, 0x248 has
209 been reported to be used by these cards.
211 More information is contained in the file
212 <file:Documentation/video4linux/radiotrack.txt>.
214 To compile this driver as a module, choose M here: the
215 module will be called radio-aimslab.
217 config RADIO_RTRACK_PORT
218 hex "RadioTrack i/o port (0x20f or 0x30f)"
219 depends on RADIO_RTRACK=y
222 Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
223 haven't changed the jumper setting on the card.
226 tristate "AIMSlab RadioTrack II support"
227 depends on ISA && VIDEO_V4L2
230 Choose Y here if you have this FM radio card, and then fill in the
233 Note: this driver hasn't been tested since a long time due to lack
234 of hardware. If you have this hardware, then please contact the
235 linux-media mailinglist.
237 To compile this driver as a module, choose M here: the
238 module will be called radio-rtrack2.
240 config RADIO_RTRACK2_PORT
241 hex "RadioTrack II i/o port (0x20c or 0x30c)"
242 depends on RADIO_RTRACK2=y
245 Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
246 haven't changed the jumper setting on the card.
249 tristate "Aztech/Packard Bell Radio"
250 depends on ISA && VIDEO_V4L2
253 Choose Y here if you have one of these FM radio cards, and then fill
254 in the port address below.
256 To compile this driver as a module, choose M here: the
257 module will be called radio-aztech.
259 config RADIO_AZTECH_PORT
260 hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
261 depends on RADIO_AZTECH=y
264 Enter either 0x350 or 0x358 here. The card default is 0x350, if you
265 haven't changed the setting of jumper JP3 on the card. Removing the
266 jumper sets the card to 0x358.
269 tristate "GemTek Radio card (or compatible) support"
270 depends on ISA && VIDEO_V4L2
273 Choose Y here if you have this FM radio card, and then fill in the
274 I/O port address and settings below. The following cards either have
275 GemTek Radio tuner or are rebranded GemTek Radio cards:
277 - Sound Vision 16 Gold with FM Radio
278 - Typhoon Radio card (some models)
281 To compile this driver as a module, choose M here: the
282 module will be called radio-gemtek.
284 config RADIO_GEMTEK_PORT
285 hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
286 depends on RADIO_GEMTEK=y
289 Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
290 card default is 0x34c, if you haven't changed the jumper setting
293 On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
294 port is 0x20c, 0x248 or 0x28c.
296 If automatic I/O port probing is enabled this port will be used only
297 in case of automatic probing failure, ie. as a fallback.
299 config RADIO_GEMTEK_PROBE
300 bool "Automatic I/O port probing"
301 depends on RADIO_GEMTEK=y
304 Say Y here to enable automatic probing for GemTek Radio card. The
305 following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
308 config RADIO_MIROPCM20
309 tristate "miroSOUND PCM20 radio"
310 depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
314 Choose Y here if you have this FM radio card. You also need to enable
315 the ALSA sound system. This choice automatically selects the ALSA
316 sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
317 is required for the radio-miropcm20.
319 To compile this driver as a module, choose M here: the
320 module will be called radio-miropcm20.
323 tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
324 depends on ISA && VIDEO_V4L2
326 Choose Y here if you have one of these FM radio cards.
328 To compile this driver as a module, choose M here: the
329 module will be called radio-sf16fmi.
331 config RADIO_SF16FMR2
332 tristate "SF16-FMR2/SF16-FMD2 Radio"
333 depends on ISA && VIDEO_V4L2 && SND
335 Choose Y here if you have one of these FM radio cards.
337 To compile this driver as a module, choose M here: the
338 module will be called radio-sf16fmr2.
340 config RADIO_TERRATEC
341 tristate "TerraTec ActiveRadio ISA Standalone"
342 depends on ISA && VIDEO_V4L2
345 Choose Y here if you have this FM radio card.
347 Note: this driver hasn't been tested since a long time due to lack
348 of hardware. If you have this hardware, then please contact the
349 linux-media mailinglist.
351 To compile this driver as a module, choose M here: the
352 module will be called radio-terratec.
355 tristate "Trust FM radio card"
356 depends on ISA && VIDEO_V4L2
359 This is a driver for the Trust FM radio cards. Say Y if you have
360 such a card and want to use it under Linux.
362 Note: this driver hasn't been tested since a long time due to lack
363 of hardware. If you have this hardware, then please contact the
364 linux-media mailinglist.
366 To compile this driver as a module, choose M here: the
367 module will be called radio-trust.
369 config RADIO_TRUST_PORT
370 hex "Trust i/o port (usually 0x350 or 0x358)"
371 depends on RADIO_TRUST=y
374 Enter the I/O port of your Trust FM radio card. If unsure, try the
375 values "0x350" or "0x358".
378 tristate "Typhoon Radio (a.k.a. EcoRadio)"
379 depends on ISA && VIDEO_V4L2
382 Choose Y here if you have one of these FM radio cards, and then fill
383 in the port address and the frequency used for muting below.
385 Note: this driver hasn't been tested since a long time due to lack
386 of hardware. If you have this hardware, then please contact the
387 linux-media mailinglist.
389 To compile this driver as a module, choose M here: the
390 module will be called radio-typhoon.
392 config RADIO_TYPHOON_PORT
393 hex "Typhoon I/O port (0x316 or 0x336)"
394 depends on RADIO_TYPHOON=y
397 Enter the I/O port of your Typhoon or EcoRadio radio card.
399 config RADIO_TYPHOON_MUTEFREQ
400 int "Typhoon frequency set when muting the device (kHz)"
401 depends on RADIO_TYPHOON=y
404 Enter the frequency used for muting the radio. The device is never
405 completely silent. If the volume is just turned down, you can still
406 hear silent voices and music. For that reason, the frequency of the
407 radio device is set to the frequency you can enter here whenever
408 the device is muted. There should be no local radio station at that
412 tristate "Zoltrix Radio"
413 depends on ISA && VIDEO_V4L2
416 Choose Y here if you have one of these FM radio cards, and then fill
417 in the port address below.
419 Note: this driver hasn't been tested since a long time due to lack
420 of hardware. If you have this hardware, then please contact the
421 linux-media mailinglist.
423 To compile this driver as a module, choose M here: the
424 module will be called radio-zoltrix.
426 config RADIO_ZOLTRIX_PORT
427 hex "ZOLTRIX I/O port (0x20c or 0x30c)"
428 depends on RADIO_ZOLTRIX=y
431 Enter the I/O port of your Zoltrix radio card.
433 endif # V4L_RADIO_ISA_DRIVERS
435 endif # RADIO_ADAPTERS