drivers/input/touchscreen/zforce_ts.c

   1 /*
   2  * Copyright (C) 2012-2013 MundoReader S.L.
   3  * Author: Heiko Stuebner <heiko@sntech.de>
   4  *
   5  * based in parts on Nook zforce driver
   6  *
   7  * Copyright (C) 2010 Barnes & Noble, Inc.
   8  * Author: Pieter Truter<ptruter@intrinsyc.com>
   9  *
  10  * This software is licensed under the terms of the GNU General Public
  11  * License version 2, as published by the Free Software Foundation, and
  12  * may be copied, distributed, and modified under those terms.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  */
  19
  20 #include <linux/module.h>
  21 #include <linux/hrtimer.h>
  22 #include <linux/slab.h>
  23 #include <linux/input.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/i2c.h>
  26 #include <linux/delay.h>
  27 #include <linux/gpio.h>
  28 #include <linux/device.h>
  29 #include <linux/sysfs.h>
  30 #include <linux/input/mt.h>
  31 #include <linux/platform_data/zforce_ts.h>
  32
  33 #define WAIT_TIMEOUT            msecs_to_jiffies(1000)
  34
  35 #define FRAME_START             0xee
  36
  37 /* Offsets of the different parts of the payload the controller sends */
  38 #define PAYLOAD_HEADER          0
  39 #define PAYLOAD_LENGTH          1
  40 #define PAYLOAD_BODY            2
  41
  42 /* Response offsets */
  43 #define RESPONSE_ID             0
  44 #define RESPONSE_DATA           1
  45
  46 /* Commands */
  47 #define COMMAND_DEACTIVATE      0x00
  48 #define COMMAND_INITIALIZE      0x01
  49 #define COMMAND_RESOLUTION      0x02
  50 #define COMMAND_SETCONFIG       0x03
  51 #define COMMAND_DATAREQUEST     0x04
  52 #define COMMAND_SCANFREQ        0x08
  53 #define COMMAND_STATUS          0X1e
  54
  55 /*
  56  * Responses the controller sends as a result of
  57  * command requests
  58  */
  59 #define RESPONSE_DEACTIVATE     0x00
  60 #define RESPONSE_INITIALIZE     0x01
  61 #define RESPONSE_RESOLUTION     0x02
  62 #define RESPONSE_SETCONFIG      0x03
  63 #define RESPONSE_SCANFREQ       0x08
  64 #define RESPONSE_STATUS         0X1e
  65
  66 /*
  67  * Notifications are send by the touch controller without
  68  * being requested by the driver and include for example
  69  * touch indications
  70  */
  71 #define NOTIFICATION_TOUCH              0x04
  72 #define NOTIFICATION_BOOTCOMPLETE       0x07
  73 #define NOTIFICATION_OVERRUN            0x25
  74 #define NOTIFICATION_PROXIMITY          0x26
  75 #define NOTIFICATION_INVALID_COMMAND    0xfe
  76
  77 #define ZFORCE_REPORT_POINTS            2
  78 #define ZFORCE_MAX_AREA                 0xff
  79
  80 #define STATE_DOWN                      0
  81 #define STATE_MOVE                      1
  82 #define STATE_UP                        2
  83
  84 #define SETCONFIG_DUALTOUCH             (1 << 0)
  85
  86 struct zforce_point {
  87         int coord_x;
  88         int coord_y;
  89         int state;
  90         int id;
  91         int area_major;
  92         int area_minor;
  93         int orientation;
  94         int pressure;
  95         int prblty;
  96 };
  97
  98 /*
  99  * @client              the i2c_client
 100  * @input               the input device
 101  * @suspending          in the process of going to suspend (don't emit wakeup
 102  *                      events for commands executed to suspend the device)
 103  * @suspended           device suspended
 104  * @access_mutex        serialize i2c-access, to keep multipart reads together
 105  * @command_done        completion to wait for the command result
 106  * @command_mutex       serialize commands send to the ic
 107  * @command_waiting     the id of the command that that is currently waiting
 108  *                      for a result
 109  * @command_result      returned result of the command
 110  */
 111 struct zforce_ts {
 112         struct i2c_client       *client;
 113         struct input_dev        *input;
 114         const struct zforce_ts_platdata *pdata;
 115         char                    phys[32];
 116
 117         bool                    suspending;
 118         bool                    suspended;
 119         bool                    boot_complete;
 120
 121         /* Firmware version information */
 122         u16                     version_major;
 123         u16                     version_minor;
 124         u16                     version_build;
 125         u16                     version_rev;
 126
 127         struct mutex            access_mutex;
 128
 129         struct completion       command_done;
 130         struct mutex            command_mutex;
 131         int                     command_waiting;
 132         int                     command_result;
 133 };
 134
 135 static int zforce_command(struct zforce_ts *ts, u8 cmd)
 136 {
 137         struct i2c_client *client = ts->client;
 138         char buf[3];
 139         int ret;
 140
 141         dev_dbg(&client->dev, "%s: 0x%x\n", __func__, cmd);
 142
 143         buf[0] = FRAME_START;
 144         buf[1] = 1; /* data size, command only */
 145         buf[2] = cmd;
 146
 147         mutex_lock(&ts->access_mutex);
 148         ret = i2c_master_send(client, &buf[0], ARRAY_SIZE(buf));
 149         mutex_unlock(&ts->access_mutex);
 150         if (ret < 0) {
 151                 dev_err(&client->dev, "i2c send data request error: %d\n", ret);
 152                 return ret;
 153         }
 154
 155         return 0;
 156 }
 157
 158 static int zforce_send_wait(struct zforce_ts *ts, const char *buf, int len)
 159 {
 160         struct i2c_client *client = ts->client;
 161         int ret;
 162
 163         ret = mutex_trylock(&ts->command_mutex);
 164         if (!ret) {
 165                 dev_err(&client->dev, "already waiting for a command\n");
 166                 return -EBUSY;
 167         }
 168
 169         dev_dbg(&client->dev, "sending %d bytes for command 0x%x\n",
 170                 buf[1], buf[2]);
 171
 172         ts->command_waiting = buf[2];
 173
 174         mutex_lock(&ts->access_mutex);
 175         ret = i2c_master_send(client, buf, len);
 176         mutex_unlock(&ts->access_mutex);
 177         if (ret < 0) {
 178                 dev_err(&client->dev, "i2c send data request error: %d\n", ret);
 179                 goto unlock;
 180         }
 181
 182         dev_dbg(&client->dev, "waiting for result for command 0x%x\n", buf[2]);
 183
 184         if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0) {
 185                 ret = -ETIME;
 186                 goto unlock;
 187         }
 188
 189         ret = ts->command_result;
 190
 191 unlock:
 192         mutex_unlock(&ts->command_mutex);
 193         return ret;
 194 }
 195
 196 static int zforce_command_wait(struct zforce_ts *ts, u8 cmd)
 197 {
 198         struct i2c_client *client = ts->client;
 199         char buf[3];
 200         int ret;
 201
 202         dev_dbg(&client->dev, "%s: 0x%x\n", __func__, cmd);
 203
 204         buf[0] = FRAME_START;
 205         buf[1] = 1; /* data size, command only */
 206         buf[2] = cmd;
 207
 208         ret = zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
 209         if (ret < 0) {
 210                 dev_err(&client->dev, "i2c send data request error: %d\n", ret);
 211                 return ret;
 212         }
 213
 214         return 0;
 215 }
 216
 217 static int zforce_resolution(struct zforce_ts *ts, u16 x, u16 y)
 218 {
 219         struct i2c_client *client = ts->client;
 220         char buf[7] = { FRAME_START, 5, COMMAND_RESOLUTION,
 221                         (x & 0xff), ((x >> 8) & 0xff),
 222                         (y & 0xff), ((y >> 8) & 0xff) };
 223
 224         dev_dbg(&client->dev, "set resolution to (%d,%d)\n", x, y);
 225
 226         return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
 227 }
 228
 229 static int zforce_scan_frequency(struct zforce_ts *ts, u16 idle, u16 finger,
 230                                  u16 stylus)
 231 {
 232         struct i2c_client *client = ts->client;
 233         char buf[9] = { FRAME_START, 7, COMMAND_SCANFREQ,
 234                         (idle & 0xff), ((idle >> 8) & 0xff),
 235                         (finger & 0xff), ((finger >> 8) & 0xff),
 236                         (stylus & 0xff), ((stylus >> 8) & 0xff) };
 237
 238         dev_dbg(&client->dev, "set scan frequency to (idle: %d, finger: %d, stylus: %d)\n",
 239                 idle, finger, stylus);
 240
 241         return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
 242 }
 243
 244 static int zforce_setconfig(struct zforce_ts *ts, char b1)
 245 {
 246         struct i2c_client *client = ts->client;
 247         char buf[7] = { FRAME_START, 5, COMMAND_SETCONFIG,
 248                         b1, 0, 0, 0 };
 249
 250         dev_dbg(&client->dev, "set config to (%d)\n", b1);
 251
 252         return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
 253 }
 254
 255 static int zforce_start(struct zforce_ts *ts)
 256 {
 257         struct i2c_client *client = ts->client;
 258         const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
 259         int ret;
 260
 261         dev_dbg(&client->dev, "starting device\n");
 262
 263         ret = zforce_command_wait(ts, COMMAND_INITIALIZE);
 264         if (ret) {
 265                 dev_err(&client->dev, "Unable to initialize, %d\n", ret);
 266                 return ret;
 267         }
 268
 269         ret = zforce_resolution(ts, pdata->x_max, pdata->y_max);
 270         if (ret) {
 271                 dev_err(&client->dev, "Unable to set resolution, %d\n", ret);
 272                 goto error;
 273         }
 274
 275         ret = zforce_scan_frequency(ts, 10, 50, 50);
 276         if (ret) {
 277                 dev_err(&client->dev, "Unable to set scan frequency, %d\n",
 278                         ret);
 279                 goto error;
 280         }
 281
 282         ret = zforce_setconfig(ts, SETCONFIG_DUALTOUCH);
 283         if (ret) {
 284                 dev_err(&client->dev, "Unable to set config\n");
 285                 goto error;
 286         }
 287
 288         /* start sending touch events */
 289         ret = zforce_command(ts, COMMAND_DATAREQUEST);
 290         if (ret) {
 291                 dev_err(&client->dev, "Unable to request data\n");
 292                 goto error;
 293         }
 294
 295         /*
 296          * Per NN, initial cal. take max. of 200msec.
 297          * Allow time to complete this calibration
 298          */
 299         msleep(200);
 300
 301         return 0;
 302
 303 error:
 304         zforce_command_wait(ts, COMMAND_DEACTIVATE);
 305         return ret;
 306 }
 307
 308 static int zforce_stop(struct zforce_ts *ts)
 309 {
 310         struct i2c_client *client = ts->client;
 311         int ret;
 312
 313         dev_dbg(&client->dev, "stopping device\n");
 314
 315         /* Deactivates touch sensing and puts the device into sleep. */
 316         ret = zforce_command_wait(ts, COMMAND_DEACTIVATE);
 317         if (ret != 0) {
 318                 dev_err(&client->dev, "could not deactivate device, %d\n",
 319                         ret);
 320                 return ret;
 321         }
 322
 323         return 0;
 324 }
 325
 326 static int zforce_touch_event(struct zforce_ts *ts, u8 *payload)
 327 {
 328         struct i2c_client *client = ts->client;
 329         const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
 330         struct zforce_point point;
 331         int count, i, num = 0;
 332
 333         count = payload[0];
 334         if (count > ZFORCE_REPORT_POINTS) {
 335                 dev_warn(&client->dev, "to many coordinates %d, expected max %d\n",
 336                          count, ZFORCE_REPORT_POINTS);
 337                 count = ZFORCE_REPORT_POINTS;
 338         }
 339
 340         for (i = 0; i < count; i++) {
 341                 point.coord_x =
 342                         payload[9 * i + 2] << 8 | payload[9 * i + 1];
 343                 point.coord_y =
 344                         payload[9 * i + 4] << 8 | payload[9 * i + 3];
 345
 346                 if (point.coord_x > pdata->x_max ||
 347                     point.coord_y > pdata->y_max) {
 348                         dev_warn(&client->dev, "coordinates (%d,%d) invalid\n",
 349                                 point.coord_x, point.coord_y);
 350                         point.coord_x = point.coord_y = 0;
 351                 }
 352
 353                 point.state = payload[9 * i + 5] & 0x03;
 354                 point.id = (payload[9 * i + 5] & 0xfc) >> 2;
 355
 356                 /* determine touch major, minor and orientation */
 357                 point.area_major = max(payload[9 * i + 6],
 358                                           payload[9 * i + 7]);
 359                 point.area_minor = min(payload[9 * i + 6],
 360                                           payload[9 * i + 7]);
 361                 point.orientation = payload[9 * i + 6] > payload[9 * i + 7];
 362
 363                 point.pressure = payload[9 * i + 8];
 364                 point.prblty = payload[9 * i + 9];
 365
 366                 dev_dbg(&client->dev,
 367                         "point %d/%d: state %d, id %d, pressure %d, prblty %d, x %d, y %d, amajor %d, aminor %d, ori %d\n",
 368                         i, count, point.state, point.id,
 369                         point.pressure, point.prblty,
 370                         point.coord_x, point.coord_y,
 371                         point.area_major, point.area_minor,
 372                         point.orientation);
 373
 374                 /* the zforce id starts with "1", so needs to be decreased */
 375                 input_mt_slot(ts->input, point.id - 1);
 376
 377                 input_mt_report_slot_state(ts->input, MT_TOOL_FINGER,
 378                                                 point.state != STATE_UP);
 379
 380                 if (point.state != STATE_UP) {
 381                         input_report_abs(ts->input, ABS_MT_POSITION_X,
 382                                          point.coord_x);
 383                         input_report_abs(ts->input, ABS_MT_POSITION_Y,
 384                                          point.coord_y);
 385                         input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
 386                                          point.area_major);
 387                         input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
 388                                          point.area_minor);
 389                         input_report_abs(ts->input, ABS_MT_ORIENTATION,
 390                                          point.orientation);
 391                         num++;
 392                 }
 393         }
 394
 395         input_mt_sync_frame(ts->input);
 396
 397         input_mt_report_finger_count(ts->input, num);
 398
 399         input_sync(ts->input);
 400
 401         return 0;
 402 }
 403
 404 static int zforce_read_packet(struct zforce_ts *ts, u8 *buf)
 405 {
 406         struct i2c_client *client = ts->client;
 407         int ret;
 408
 409         mutex_lock(&ts->access_mutex);
 410
 411         /* read 2 byte message header */
 412         ret = i2c_master_recv(client, buf, 2);
 413         if (ret < 0) {
 414                 dev_err(&client->dev, "error reading header: %d\n", ret);
 415                 goto unlock;
 416         }
 417
 418         if (buf[PAYLOAD_HEADER] != FRAME_START) {
 419                 dev_err(&client->dev, "invalid frame start: %d\n", buf[0]);
 420                 ret = -EIO;
 421                 goto unlock;
 422         }
 423
 424         if (buf[PAYLOAD_LENGTH] <= 0 || buf[PAYLOAD_LENGTH] > 255) {
 425                 dev_err(&client->dev, "invalid payload length: %d\n",
 426                         buf[PAYLOAD_LENGTH]);
 427                 ret = -EIO;
 428                 goto unlock;
 429         }
 430
 431         /* read the message */
 432         ret = i2c_master_recv(client, &buf[PAYLOAD_BODY], buf[PAYLOAD_LENGTH]);
 433         if (ret < 0) {
 434                 dev_err(&client->dev, "error reading payload: %d\n", ret);
 435                 goto unlock;
 436         }
 437
 438         dev_dbg(&client->dev, "read %d bytes for response command 0x%x\n",
 439                 buf[PAYLOAD_LENGTH], buf[PAYLOAD_BODY]);
 440
 441 unlock:
 442         mutex_unlock(&ts->access_mutex);
 443         return ret;
 444 }
 445
 446 static void zforce_complete(struct zforce_ts *ts, int cmd, int result)
 447 {
 448         struct i2c_client *client = ts->client;
 449
 450         if (ts->command_waiting == cmd) {
 451                 dev_dbg(&client->dev, "completing command 0x%x\n", cmd);
 452                 ts->command_result = result;
 453                 complete(&ts->command_done);
 454         } else {
 455                 dev_dbg(&client->dev, "command %d not for us\n", cmd);
 456         }
 457 }
 458
 459 static irqreturn_t zforce_irq(int irq, void *dev_id)
 460 {
 461         struct zforce_ts *ts = dev_id;
 462         struct i2c_client *client = ts->client;
 463
 464         if (ts->suspended && device_may_wakeup(&client->dev))
 465                 pm_wakeup_event(&client->dev, 500);
 466
 467         return IRQ_WAKE_THREAD;
 468 }
 469
 470 static irqreturn_t zforce_irq_thread(int irq, void *dev_id)
 471 {
 472         struct zforce_ts *ts = dev_id;
 473         struct i2c_client *client = ts->client;
 474         const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
 475         int ret;
 476         u8 payload_buffer[512];
 477         u8 *payload;
 478
 479         /*
 480          * When still suspended, return.
 481          * Due to the level-interrupt we will get re-triggered later.
 482          */
 483         if (ts->suspended) {
 484                 msleep(20);
 485                 return IRQ_HANDLED;
 486         }
 487
 488         dev_dbg(&client->dev, "handling interrupt\n");
 489
 490         /* Don't emit wakeup events from commands run by zforce_suspend */
 491         if (!ts->suspending && device_may_wakeup(&client->dev))
 492                 pm_stay_awake(&client->dev);
 493
 494         while (!gpio_get_value(pdata->gpio_int)) {
 495                 ret = zforce_read_packet(ts, payload_buffer);
 496                 if (ret < 0) {
 497                         dev_err(&client->dev, "could not read packet, ret: %d\n",
 498                                 ret);
 499                         break;
 500                 }
 501
 502                 payload =  &payload_buffer[PAYLOAD_BODY];
 503
 504                 switch (payload[RESPONSE_ID]) {
 505                 case NOTIFICATION_TOUCH:
 506                         /*
 507                          * Always report touch-events received while
 508                          * suspending, when being a wakeup source
 509                          */
 510                         if (ts->suspending && device_may_wakeup(&client->dev))
 511                                 pm_wakeup_event(&client->dev, 500);
 512                         zforce_touch_event(ts, &payload[RESPONSE_DATA]);
 513                         break;
 514
 515                 case NOTIFICATION_BOOTCOMPLETE:
 516                         ts->boot_complete = payload[RESPONSE_DATA];
 517                         zforce_complete(ts, payload[RESPONSE_ID], 0);
 518                         break;
 519
 520                 case RESPONSE_INITIALIZE:
 521                 case RESPONSE_DEACTIVATE:
 522                 case RESPONSE_SETCONFIG:
 523                 case RESPONSE_RESOLUTION:
 524                 case RESPONSE_SCANFREQ:
 525                         zforce_complete(ts, payload[RESPONSE_ID],
 526                                         payload[RESPONSE_DATA]);
 527                         break;
 528
 529                 case RESPONSE_STATUS:
 530                         /*
 531                          * Version Payload Results
 532                          * [2:major] [2:minor] [2:build] [2:rev]
 533                          */
 534                         ts->version_major = (payload[RESPONSE_DATA + 1] << 8) |
 535                                                 payload[RESPONSE_DATA];
 536                         ts->version_minor = (payload[RESPONSE_DATA + 3] << 8) |
 537                                                 payload[RESPONSE_DATA + 2];
 538                         ts->version_build = (payload[RESPONSE_DATA + 5] << 8) |
 539                                                 payload[RESPONSE_DATA + 4];
 540                         ts->version_rev   = (payload[RESPONSE_DATA + 7] << 8) |
 541                                                 payload[RESPONSE_DATA + 6];
 542                         dev_dbg(&ts->client->dev, "Firmware Version %04x:%04x %04x:%04x\n",
 543                                 ts->version_major, ts->version_minor,
 544                                 ts->version_build, ts->version_rev);
 545
 546                         zforce_complete(ts, payload[RESPONSE_ID], 0);
 547                         break;
 548
 549                 case NOTIFICATION_INVALID_COMMAND:
 550                         dev_err(&ts->client->dev, "invalid command: 0x%x\n",
 551                                 payload[RESPONSE_DATA]);
 552                         break;
 553
 554                 default:
 555                         dev_err(&ts->client->dev, "unrecognized response id: 0x%x\n",
 556                                 payload[RESPONSE_ID]);
 557                         break;
 558                 }
 559         }
 560
 561         if (!ts->suspending && device_may_wakeup(&client->dev))
 562                 pm_relax(&client->dev);
 563
 564         dev_dbg(&client->dev, "finished interrupt\n");
 565
 566         return IRQ_HANDLED;
 567 }
 568
 569 static int zforce_input_open(struct input_dev *dev)
 570 {
 571         struct zforce_ts *ts = input_get_drvdata(dev);
 572         int ret;
 573
 574         ret = zforce_start(ts);
 575         if (ret)
 576                 return ret;
 577
 578         return 0;
 579 }
 580
 581 static void zforce_input_close(struct input_dev *dev)
 582 {
 583         struct zforce_ts *ts = input_get_drvdata(dev);
 584         struct i2c_client *client = ts->client;
 585         int ret;
 586
 587         ret = zforce_stop(ts);
 588         if (ret)
 589                 dev_warn(&client->dev, "stopping zforce failed\n");
 590
 591         return;
 592 }
 593
 594 #ifdef CONFIG_PM_SLEEP
 595 static int zforce_suspend(struct device *dev)
 596 {
 597         struct i2c_client *client = to_i2c_client(dev);
 598         struct zforce_ts *ts = i2c_get_clientdata(client);
 599         struct input_dev *input = ts->input;
 600         int ret = 0;
 601
 602         mutex_lock(&input->mutex);
 603         ts->suspending = true;
 604
 605         /*
 606          * When configured as a wakeup source device should always wake
 607          * the system, therefore start device if necessary.
 608          */
 609         if (device_may_wakeup(&client->dev)) {
 610                 dev_dbg(&client->dev, "suspend while being a wakeup source\n");
 611
 612                 /* Need to start device, if not open, to be a wakeup source. */
 613                 if (!input->users) {
 614                         ret = zforce_start(ts);
 615                         if (ret)
 616                                 goto unlock;
 617                 }
 618
 619                 enable_irq_wake(client->irq);
 620         } else if (input->users) {
 621                 dev_dbg(&client->dev, "suspend without being a wakeup source\n");
 622
 623                 ret = zforce_stop(ts);
 624                 if (ret)
 625                         goto unlock;
 626
 627                 disable_irq(client->irq);
 628         }
 629
 630         ts->suspended = true;
 631
 632 unlock:
 633         ts->suspending = false;
 634         mutex_unlock(&input->mutex);
 635
 636         return ret;
 637 }
 638
 639 static int zforce_resume(struct device *dev)
 640 {
 641         struct i2c_client *client = to_i2c_client(dev);
 642         struct zforce_ts *ts = i2c_get_clientdata(client);
 643         struct input_dev *input = ts->input;
 644         int ret = 0;
 645
 646         mutex_lock(&input->mutex);
 647
 648         ts->suspended = false;
 649
 650         if (device_may_wakeup(&client->dev)) {
 651                 dev_dbg(&client->dev, "resume from being a wakeup source\n");
 652
 653                 disable_irq_wake(client->irq);
 654
 655                 /* need to stop device if it was not open on suspend */
 656                 if (!input->users) {
 657                         ret = zforce_stop(ts);
 658                         if (ret)
 659                                 goto unlock;
 660                 }
 661         } else if (input->users) {
 662                 dev_dbg(&client->dev, "resume without being a wakeup source\n");
 663
 664                 enable_irq(client->irq);
 665
 666                 ret = zforce_start(ts);
 667                 if (ret < 0)
 668                         goto unlock;
 669         }
 670
 671 unlock:
 672         mutex_unlock(&input->mutex);
 673
 674         return ret;
 675 }
 676 #endif
 677
 678 static SIMPLE_DEV_PM_OPS(zforce_pm_ops, zforce_suspend, zforce_resume);
 679
 680 static void zforce_reset(void *data)
 681 {
 682         struct zforce_ts *ts = data;
 683
 684         gpio_set_value(ts->pdata->gpio_rst, 0);
 685 }
 686
 687 static int zforce_probe(struct i2c_client *client,
 688                         const struct i2c_device_id *id)
 689 {
 690         const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
 691         struct zforce_ts *ts;
 692         struct input_dev *input_dev;
 693         int ret;
 694
 695         if (!pdata)
 696                 return -EINVAL;
 697
 698         ts = devm_kzalloc(&client->dev, sizeof(struct zforce_ts), GFP_KERNEL);
 699         if (!ts)
 700                 return -ENOMEM;
 701
 702         ret = devm_gpio_request_one(&client->dev, pdata->gpio_int, GPIOF_IN,
 703                                     "zforce_ts_int");
 704         if (ret) {
 705                 dev_err(&client->dev, "request of gpio %d failed, %d\n",
 706                         pdata->gpio_int, ret);
 707                 return ret;
 708         }
 709
 710         ret = devm_gpio_request_one(&client->dev, pdata->gpio_rst,
 711                                     GPIOF_OUT_INIT_LOW, "zforce_ts_rst");
 712         if (ret) {
 713                 dev_err(&client->dev, "request of gpio %d failed, %d\n",
 714                         pdata->gpio_rst, ret);
 715                 return ret;
 716         }
 717
 718         ret = devm_add_action(&client->dev, zforce_reset, ts);
 719         if (ret) {
 720                 dev_err(&client->dev, "failed to register reset action, %d\n",
 721                         ret);
 722                 return ret;
 723         }
 724
 725         snprintf(ts->phys, sizeof(ts->phys),
 726                  "%s/input0", dev_name(&client->dev));
 727
 728         input_dev = devm_input_allocate_device(&client->dev);
 729         if (!input_dev) {
 730                 dev_err(&client->dev, "could not allocate input device\n");
 731                 return -ENOMEM;
 732         }
 733
 734         mutex_init(&ts->access_mutex);
 735         mutex_init(&ts->command_mutex);
 736
 737         ts->pdata = pdata;
 738         ts->client = client;
 739         ts->input = input_dev;
 740
 741         input_dev->name = "Neonode zForce touchscreen";
 742         input_dev->phys = ts->phys;
 743         input_dev->id.bustype = BUS_I2C;
 744
 745         input_dev->open = zforce_input_open;
 746         input_dev->close = zforce_input_close;
 747
 748         __set_bit(EV_KEY, input_dev->evbit);
 749         __set_bit(EV_SYN, input_dev->evbit);
 750         __set_bit(EV_ABS, input_dev->evbit);
 751
 752         /* For multi touch */
 753         input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
 754                              pdata->x_max, 0, 0);
 755         input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
 756                              pdata->y_max, 0, 0);
 757
 758         input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
 759                              ZFORCE_MAX_AREA, 0, 0);
 760         input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0,
 761                              ZFORCE_MAX_AREA, 0, 0);
 762         input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
 763         input_mt_init_slots(input_dev, ZFORCE_REPORT_POINTS, INPUT_MT_DIRECT);
 764
 765         input_set_drvdata(ts->input, ts);
 766
 767         init_completion(&ts->command_done);
 768
 769         /*
 770          * The zforce pulls the interrupt low when it has data ready.
 771          * After it is triggered the isr thread runs until all the available
 772          * packets have been read and the interrupt is high again.
 773          * Therefore we can trigger the interrupt anytime it is low and do
 774          * not need to limit it to the interrupt edge.
 775          */
 776         ret = devm_request_threaded_irq(&client->dev, client->irq,
 777                                         zforce_irq, zforce_irq_thread,
 778                                         IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 779                                         input_dev->name, ts);
 780         if (ret) {
 781                 dev_err(&client->dev, "irq %d request failed\n", client->irq);
 782                 return ret;
 783         }
 784
 785         i2c_set_clientdata(client, ts);
 786
 787         /* let the controller boot */
 788         gpio_set_value(pdata->gpio_rst, 1);
 789
 790         ts->command_waiting = NOTIFICATION_BOOTCOMPLETE;
 791         if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0)
 792                 dev_warn(&client->dev, "bootcomplete timed out\n");
 793
 794         /* need to start device to get version information */
 795         ret = zforce_command_wait(ts, COMMAND_INITIALIZE);
 796         if (ret) {
 797                 dev_err(&client->dev, "unable to initialize, %d\n", ret);
 798                 return ret;
 799         }
 800
 801         /* this gets the firmware version among other informations */
 802         ret = zforce_command_wait(ts, COMMAND_STATUS);
 803         if (ret < 0) {
 804                 dev_err(&client->dev, "couldn't get status, %d\n", ret);
 805                 zforce_stop(ts);
 806                 return ret;
 807         }
 808
 809         /* stop device and put it into sleep until it is opened */
 810         ret = zforce_stop(ts);
 811         if (ret < 0)
 812                 return ret;
 813
 814         device_set_wakeup_capable(&client->dev, true);
 815
 816         ret = input_register_device(input_dev);
 817         if (ret) {
 818                 dev_err(&client->dev, "could not register input device, %d\n",
 819                         ret);
 820                 return ret;
 821         }
 822
 823         return 0;
 824 }
 825
 826 static struct i2c_device_id zforce_idtable[] = {
 827         { "zforce-ts", 0 },
 828         { }
 829 };
 830 MODULE_DEVICE_TABLE(i2c, zforce_idtable);
 831
 832 static struct i2c_driver zforce_driver = {
 833         .driver = {
 834                 .owner  = THIS_MODULE,
 835                 .name   = "zforce-ts",
 836                 .pm     = &zforce_pm_ops,
 837         },
 838         .probe          = zforce_probe,
 839         .id_table       = zforce_idtable,
 840 };
 841
 842 module_i2c_driver(zforce_driver);
 843
 844 MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
 845 MODULE_DESCRIPTION("zForce TouchScreen Driver");
 846 MODULE_LICENSE("GPL");