2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_PROPERTIES
18 config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
30 config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
33 depends on HWMON = n || HWMON
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
44 If unsure, say N (but it's safe to say "Y").
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
49 config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
57 If unsure, say N (but it's safe to say "Y").
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
62 config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
68 You should select a bus connection too.
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
73 config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
79 To compile this driver as a module, choose M here: the
80 module will be called ad7879-i2c.
82 config TOUCHSCREEN_AD7879_SPI
83 tristate "support SPI bus connection"
84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
88 If unsure, say N (but it's safe to say "Y").
90 To compile this driver as a module, choose M here: the
91 module will be called ad7879-spi.
93 config TOUCHSCREEN_AR1021_I2C
94 tristate "Microchip AR1021 i2c touchscreen"
97 Say Y here if you have the Microchip AR1021 touchscreen controller
102 To compile this driver as a module, choose M here: the
103 module will be called ar1021_i2c.
105 config TOUCHSCREEN_ATMEL_MXT
106 tristate "Atmel mXT I2C Touchscreen"
110 Say Y here if you have Atmel mXT series I2C touchscreen,
111 such as AT42QT602240/ATMXT224, connected to your system.
115 To compile this driver as a module, choose M here: the
116 module will be called atmel_mxt_ts.
118 config TOUCHSCREEN_AUO_PIXCIR
119 tristate "AUO in-cell touchscreen using Pixcir ICs"
121 depends on GPIOLIB || COMPILE_TEST
123 Say Y here if you have a AUO display with in-cell touchscreen
128 To compile this driver as a module, choose M here: the
129 module will be called auo-pixcir-ts.
131 config TOUCHSCREEN_BU21013
132 tristate "BU21013 based touch panel controllers"
135 Say Y here if you have a bu21013 touchscreen connected to
140 To compile this driver as a module, choose M here: the
141 module will be called bu21013_ts.
143 config TOUCHSCREEN_CHIPONE_ICN8318
144 tristate "chipone icn8318 touchscreen controller"
145 depends on GPIOLIB || COMPILE_TEST
149 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
153 To compile this driver as a module, choose M here: the
154 module will be called chipone_icn8318.
156 config TOUCHSCREEN_CY8CTMG110
157 tristate "cy8ctmg110 touchscreen"
159 depends on GPIOLIB || COMPILE_TEST
161 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
166 To compile this driver as a module, choose M here: the
167 module will be called cy8ctmg110_ts.
169 config TOUCHSCREEN_CYTTSP_CORE
170 tristate "Cypress TTSP touchscreen"
172 Say Y here if you have a touchscreen using controller from
173 the Cypress TrueTouch(tm) Standard Product family connected
174 to your system. You will also need to select appropriate
175 bus connection below.
179 To compile this driver as a module, choose M here: the
180 module will be called cyttsp_core.
182 config TOUCHSCREEN_CYTTSP_I2C
183 tristate "support I2C bus connection"
184 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
186 Say Y here if the touchscreen is connected via I2C bus.
188 To compile this driver as a module, choose M here: the
189 module will be called cyttsp_i2c.
191 config TOUCHSCREEN_CYTTSP_SPI
192 tristate "support SPI bus connection"
193 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
195 Say Y here if the touchscreen is connected via SPI bus.
197 To compile this driver as a module, choose M here: the
198 module will be called cyttsp_spi.
200 config TOUCHSCREEN_CYTTSP4_CORE
201 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
203 Core driver for Cypress TrueTouch(tm) Standard Product
204 Generation4 touchscreen controllers.
206 Say Y here if you have a Cypress Gen4 touchscreen.
210 To compile this driver as a module, choose M here.
212 config TOUCHSCREEN_CYTTSP4_I2C
213 tristate "support I2C bus connection"
214 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
216 Say Y here if the touchscreen is connected via I2C bus.
218 To compile this driver as a module, choose M here: the
219 module will be called cyttsp4_i2c.
221 config TOUCHSCREEN_CYTTSP4_SPI
222 tristate "support SPI bus connection"
223 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
225 Say Y here if the touchscreen is connected via SPI bus.
227 To compile this driver as a module, choose M here: the
228 module will be called cyttsp4_spi.
230 config TOUCHSCREEN_DA9034
231 tristate "Touchscreen support for Dialog Semiconductor DA9034"
232 depends on PMIC_DA903X
235 Say Y here to enable the support for the touchscreen found
236 on Dialog Semiconductor DA9034 PMIC.
240 To compile this driver as a module, choose M here: the
241 module will be called da9034-ts.
243 config TOUCHSCREEN_DA9052
244 tristate "Dialog DA9052/DA9053 TSI"
245 depends on PMIC_DA9052
247 Say Y here to support the touchscreen found on Dialog Semiconductor
248 DA9052-BC and DA9053-AA/Bx PMICs.
252 To compile this driver as a module, choose M here: the
253 module will be called da9052_tsi.
255 config TOUCHSCREEN_DYNAPRO
256 tristate "Dynapro serial touchscreen"
259 Say Y here if you have a Dynapro serial touchscreen connected to
264 To compile this driver as a module, choose M here: the
265 module will be called dynapro.
267 config TOUCHSCREEN_HAMPSHIRE
268 tristate "Hampshire serial touchscreen"
271 Say Y here if you have a Hampshire serial touchscreen connected to
276 To compile this driver as a module, choose M here: the
277 module will be called hampshire.
279 config TOUCHSCREEN_EETI
280 tristate "EETI touchscreen panel support"
283 Say Y here to enable support for I2C connected EETI touch panels.
285 To compile this driver as a module, choose M here: the
286 module will be called eeti_ts.
288 config TOUCHSCREEN_EGALAX
289 tristate "EETI eGalax multi-touch panel support"
292 Say Y here to enable support for I2C connected EETI
293 eGalax multi-touch panels.
295 To compile this driver as a module, choose M here: the
296 module will be called egalax_ts.
298 config TOUCHSCREEN_FT6236
299 tristate "FT6236 I2C touchscreen"
301 depends on GPIOLIB || COMPILE_TEST
303 Say Y here to enable support for the I2C connected FT6x06 and
304 FT6x36 family of capacitive touchscreen drivers.
308 To compile this driver as a module, choose M here: the
309 module will be called ft6236.
311 config TOUCHSCREEN_FUJITSU
312 tristate "Fujitsu serial touchscreen"
315 Say Y here if you have the Fujitsu touchscreen (such as one
316 installed in Lifebook P series laptop) connected to your
321 To compile this driver as a module, choose M here: the
322 module will be called fujitsu-ts.
324 config TOUCHSCREEN_GOODIX
325 tristate "Goodix I2C touchscreen"
328 Say Y here if you have the Goodix touchscreen (such as one
329 installed in Onda v975w tablets) connected to your
330 system. It also supports 5-finger chip models, which can be
331 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
335 To compile this driver as a module, choose M here: the
336 module will be called goodix.
338 config TOUCHSCREEN_GT9XX
339 tristate "Goodix gt9xx support for rockchip platform"
340 depends on I2C && ARCH_ROCKCHIP
342 Say Y here if you have a touchscreen interface using the gt9xx
343 on Rockchip platform, and your board-specific initialization
344 code includes that in its table of IIC devices.
347 config TOUCHSCREEN_ILI210X
348 tristate "Ilitek ILI210X based touchscreen"
351 Say Y here if you have a ILI210X based touchscreen
352 controller. This driver supports models ILI2102,
353 ILI2102s, ILI2103, ILI2103s and ILI2105.
354 Such kind of chipsets can be found in Amazon Kindle Fire
359 To compile this driver as a module, choose M here: the
360 module will be called ili210x.
362 config TOUCHSCREEN_IPROC
363 tristate "IPROC touch panel driver support"
364 depends on ARCH_BCM_IPROC || COMPILE_TEST
366 Say Y here if you want to add support for the IPROC touch
367 controller to your system.
371 To compile this driver as a module, choose M here: the
372 module will be called bcm_iproc_tsc.
374 config TOUCHSCREEN_S3C2410
375 tristate "Samsung S3C2410/generic touchscreen input driver"
376 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
379 Say Y here if you have the s3c2410 touchscreen.
383 To compile this driver as a module, choose M here: the
384 module will be called s3c2410_ts.
386 config TOUCHSCREEN_GUNZE
387 tristate "Gunze AHL-51S touchscreen"
390 Say Y here if you have the Gunze AHL-51 touchscreen connected to
395 To compile this driver as a module, choose M here: the
396 module will be called gunze.
398 config TOUCHSCREEN_ELAN
399 tristate "Elan eKTH I2C touchscreen"
402 Say Y here if you have an Elan eKTH I2C touchscreen
403 connected to your system.
407 To compile this driver as a module, choose M here: the
408 module will be called elants_i2c.
410 config TOUCHSCREEN_ELO
411 tristate "Elo serial touchscreens"
414 Say Y here if you have an Elo serial touchscreen connected to
419 To compile this driver as a module, choose M here: the
420 module will be called elo.
422 config TOUCHSCREEN_WACOM_W8001
423 tristate "Wacom W8001 penabled serial touchscreen"
426 Say Y here if you have an Wacom W8001 penabled serial touchscreen
427 connected to your system.
431 To compile this driver as a module, choose M here: the
432 module will be called wacom_w8001.
434 config TOUCHSCREEN_WACOM_I2C
435 tristate "Wacom Tablet support (I2C)"
438 Say Y here if you want to use the I2C version of the Wacom
443 To compile this driver as a module, choose M here: the module
444 will be called wacom_i2c.
446 config TOUCHSCREEN_LPC32XX
447 tristate "LPC32XX touchscreen controller"
448 depends on ARCH_LPC32XX
450 Say Y here if you have a LPC32XX device and want
451 to support the built-in touchscreen.
453 To compile this driver as a module, choose M here: the
454 module will be called lpc32xx_ts.
456 config TOUCHSCREEN_MAX11801
457 tristate "MAX11801 based touchscreens"
460 Say Y here if you have a MAX11801 based touchscreen
465 To compile this driver as a module, choose M here: the
466 module will be called max11801_ts.
468 config TOUCHSCREEN_MCS5000
469 tristate "MELFAS MCS-5000 touchscreen"
472 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
477 To compile this driver as a module, choose M here: the
478 module will be called mcs5000_ts.
480 config TOUCHSCREEN_MMS114
481 tristate "MELFAS MMS114 touchscreen"
484 Say Y here if you have the MELFAS MMS114 touchscreen controller
489 To compile this driver as a module, choose M here: the
490 module will be called mms114.
492 config TOUCHSCREEN_MTOUCH
493 tristate "MicroTouch serial touchscreens"
496 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
501 To compile this driver as a module, choose M here: the
502 module will be called mtouch.
504 config TOUCHSCREEN_IMX6UL_TSC
505 tristate "Freescale i.MX6UL touchscreen controller"
506 depends on (OF && GPIOLIB) || COMPILE_TEST
508 Say Y here if you have a Freescale i.MX6UL, and want to
509 use the internal touchscreen controller.
513 To compile this driver as a module, choose M here: the
514 module will be called imx6ul_tsc.
516 config TOUCHSCREEN_INEXIO
517 tristate "iNexio serial touchscreens"
520 Say Y here if you have an iNexio serial touchscreen connected to
525 To compile this driver as a module, choose M here: the
526 module will be called inexio.
528 config TOUCHSCREEN_INTEL_MID
529 tristate "Intel MID platform resistive touchscreen"
530 depends on INTEL_SCU_IPC
532 Say Y here if you have a Intel MID based touchscreen in
537 To compile this driver as a module, choose M here: the
538 module will be called intel_mid_touch.
540 config TOUCHSCREEN_MK712
541 tristate "ICS MicroClock MK712 touchscreen"
543 Say Y here if you have the ICS MicroClock MK712 touchscreen
544 controller chip in your system.
548 To compile this driver as a module, choose M here: the
549 module will be called mk712.
551 config TOUCHSCREEN_HP600
552 tristate "HP Jornada 6xx touchscreen"
553 depends on SH_HP6XX && SH_ADC
555 Say Y here if you have a HP Jornada 620/660/680/690 and want to
556 support the built-in touchscreen.
558 To compile this driver as a module, choose M here: the
559 module will be called hp680_ts_input.
561 config TOUCHSCREEN_HP7XX
562 tristate "HP Jornada 7xx touchscreen"
563 depends on SA1100_JORNADA720_SSP
565 Say Y here if you have a HP Jornada 710/720/728 and want
566 to support the built-in touchscreen.
568 To compile this driver as a module, choose M here: the
569 module will be called jornada720_ts.
571 config TOUCHSCREEN_IPAQ_MICRO
572 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
573 depends on MFD_IPAQ_MICRO
575 Say Y here to enable support for the touchscreen attached to
576 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
580 To compile this driver as a module, choose M here: the
581 module will be called ipaq-micro-ts.
583 config TOUCHSCREEN_HTCPEN
584 tristate "HTC Shift X9500 touchscreen"
587 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
588 Clio / Shangrila and want to support the built-in touchscreen.
592 To compile this driver as a module, choose M here: the
593 module will be called htcpen.
595 config TOUCHSCREEN_PENMOUNT
596 tristate "Penmount serial touchscreen"
599 Say Y here if you have a Penmount serial touchscreen connected to
604 To compile this driver as a module, choose M here: the
605 module will be called penmount.
607 config TOUCHSCREEN_EDT_FT5X06
608 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
611 Say Y here if you have an EDT "Polytouch" touchscreen based
612 on the FocalTech FT5x06 family of controllers connected to
617 To compile this driver as a module, choose M here: the
618 module will be called edt-ft5x06.
620 config TOUCHSCREEN_MIGOR
621 tristate "Renesas MIGO-R touchscreen"
622 depends on SH_MIGOR && I2C
624 Say Y here to enable MIGO-R touchscreen support.
628 To compile this driver as a module, choose M here: the
629 module will be called migor_ts.
631 config TOUCHSCREEN_TOUCHRIGHT
632 tristate "Touchright serial touchscreen"
635 Say Y here if you have a Touchright serial touchscreen connected to
640 To compile this driver as a module, choose M here: the
641 module will be called touchright.
643 config TOUCHSCREEN_TOUCHWIN
644 tristate "Touchwin serial touchscreen"
647 Say Y here if you have a Touchwin serial touchscreen connected to
652 To compile this driver as a module, choose M here: the
653 module will be called touchwin.
655 config TOUCHSCREEN_TI_AM335X_TSC
656 tristate "TI Touchscreen Interface"
657 depends on MFD_TI_AM335X_TSCADC
659 Say Y here if you have 4/5/8 wire touchscreen controller
660 to be connected to the ADC controller on your TI AM335x SoC.
664 To compile this driver as a module, choose M here: the
665 module will be called ti_am335x_tsc.
667 config TOUCHSCREEN_UCB1400
668 tristate "Philips UCB1400 touchscreen"
670 depends on UCB1400_CORE
672 This enables support for the Philips UCB1400 touchscreen interface.
673 The UCB1400 is an AC97 audio codec. The touchscreen interface
674 will be initialized only after the ALSA subsystem has been
675 brought up and the UCB1400 detected. You therefore have to
676 configure ALSA support as well (either built-in or modular,
677 independently of whether this driver is itself built-in or
678 modular) for this driver to work.
680 To compile this driver as a module, choose M here: the
681 module will be called ucb1400_ts.
683 config TOUCHSCREEN_PIXCIR
684 tristate "PIXCIR I2C touchscreens"
687 Say Y here if you have a pixcir i2c touchscreen
692 To compile this driver as a module, choose M here: the
693 module will be called pixcir_i2c_ts.
695 config TOUCHSCREEN_WDT87XX_I2C
696 tristate "Weida HiTech I2C touchscreen"
699 Say Y here if you have a Weida WDT87XX I2C touchscreen
700 connected to your system.
704 To compile this driver as a module, choose M here: the
705 module will be called wdt87xx_i2c.
707 config TOUCHSCREEN_WM831X
708 tristate "Support for WM831x touchscreen controllers"
709 depends on MFD_WM831X
711 This enables support for the touchscreen controller on the WM831x
714 To compile this driver as a module, choose M here: the
715 module will be called wm831x-ts.
717 config TOUCHSCREEN_WM97XX
718 tristate "Support for WM97xx AC97 touchscreen controllers"
721 Say Y here if you have a Wolfson Microelectronics WM97xx
722 touchscreen connected to your system. Note that this option
723 only enables core driver, you will also need to select
724 support for appropriate chip below.
728 To compile this driver as a module, choose M here: the
729 module will be called wm97xx-ts.
731 config TOUCHSCREEN_WM9705
732 bool "WM9705 Touchscreen interface support"
733 depends on TOUCHSCREEN_WM97XX
736 Say Y here to enable support for the Wolfson Microelectronics
737 WM9705 touchscreen controller.
739 config TOUCHSCREEN_WM9712
740 bool "WM9712 Touchscreen interface support"
741 depends on TOUCHSCREEN_WM97XX
744 Say Y here to enable support for the Wolfson Microelectronics
745 WM9712 touchscreen controller.
747 config TOUCHSCREEN_WM9713
748 bool "WM9713 Touchscreen interface support"
749 depends on TOUCHSCREEN_WM97XX
752 Say Y here to enable support for the Wolfson Microelectronics
753 WM9713 touchscreen controller.
755 config TOUCHSCREEN_WM97XX_ATMEL
756 tristate "WM97xx Atmel accelerated touch"
757 depends on TOUCHSCREEN_WM97XX && AVR32
759 Say Y here for support for streaming mode with WM97xx touchscreens
760 on Atmel AT91 or AVR32 systems with an AC97C module.
762 Be aware that this will use channel B in the controller for
763 streaming data, this must not conflict with other AC97C drivers.
767 To compile this driver as a module, choose M here: the module will
768 be called atmel-wm97xx.
770 config TOUCHSCREEN_WM97XX_MAINSTONE
771 tristate "WM97xx Mainstone/Palm accelerated touch"
772 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
774 Say Y here for support for streaming mode with WM97xx touchscreens
775 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
779 To compile this driver as a module, choose M here: the
780 module will be called mainstone-wm97xx.
782 config TOUCHSCREEN_WM97XX_ZYLONITE
783 tristate "Zylonite accelerated touch"
784 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
785 select TOUCHSCREEN_WM9713
787 Say Y here for support for streaming mode with the touchscreen
792 To compile this driver as a module, choose M here: the
793 module will be called zylonite-wm97xx.
795 config TOUCHSCREEN_USB_COMPOSITE
796 tristate "USB Touchscreen Driver"
797 depends on USB_ARCH_HAS_HCD
800 USB Touchscreen driver for:
801 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
802 - PanJit TouchSet USB
803 - 3M MicroTouch USB (EX II series)
805 - some other eTurboTouch
808 - IRTOUCHSYSTEMS/UNITOP
810 - GoTop Super_Q2/GogoPen/PenPower tablets
811 - JASTEC USB Touch Controller/DigiTech DTR-02U
812 - Zytronic controllers
813 - Elo TouchSystems 2700 IntelliTouch
814 - EasyTouch USB Touch Controller from Data Modul
815 - e2i (Mimo monitors)
817 Have a look at <http://linux.chapter7.ch/touchkit/> for
818 a usage description and the required user-space stuff.
820 To compile this driver as a module, choose M here: the
821 module will be called usbtouchscreen.
823 config TOUCHSCREEN_MC13783
824 tristate "Freescale MC13783 touchscreen input driver"
825 depends on MFD_MC13XXX
827 Say Y here if you have an Freescale MC13783 PMIC on your
828 board and want to use its touchscreen
832 To compile this driver as a module, choose M here: the
833 module will be called mc13783_ts.
835 config TOUCHSCREEN_USB_EGALAX
837 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
838 depends on TOUCHSCREEN_USB_COMPOSITE
840 config TOUCHSCREEN_USB_PANJIT
842 bool "PanJit device support" if EXPERT
843 depends on TOUCHSCREEN_USB_COMPOSITE
845 config TOUCHSCREEN_USB_3M
847 bool "3M/Microtouch EX II series device support" if EXPERT
848 depends on TOUCHSCREEN_USB_COMPOSITE
850 config TOUCHSCREEN_USB_ITM
852 bool "ITM device support" if EXPERT
853 depends on TOUCHSCREEN_USB_COMPOSITE
855 config TOUCHSCREEN_USB_ETURBO
857 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
858 depends on TOUCHSCREEN_USB_COMPOSITE
860 config TOUCHSCREEN_USB_GUNZE
862 bool "Gunze AHL61 device support" if EXPERT
863 depends on TOUCHSCREEN_USB_COMPOSITE
865 config TOUCHSCREEN_USB_DMC_TSC10
867 bool "DMC TSC-10/25 device support" if EXPERT
868 depends on TOUCHSCREEN_USB_COMPOSITE
870 config TOUCHSCREEN_USB_IRTOUCH
872 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
873 depends on TOUCHSCREEN_USB_COMPOSITE
875 config TOUCHSCREEN_USB_IDEALTEK
877 bool "IdealTEK URTC1000 device support" if EXPERT
878 depends on TOUCHSCREEN_USB_COMPOSITE
880 config TOUCHSCREEN_USB_GENERAL_TOUCH
882 bool "GeneralTouch Touchscreen device support" if EXPERT
883 depends on TOUCHSCREEN_USB_COMPOSITE
885 config TOUCHSCREEN_USB_GOTOP
887 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
888 depends on TOUCHSCREEN_USB_COMPOSITE
890 config TOUCHSCREEN_USB_JASTEC
892 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
893 depends on TOUCHSCREEN_USB_COMPOSITE
895 config TOUCHSCREEN_USB_ELO
897 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
898 depends on TOUCHSCREEN_USB_COMPOSITE
900 config TOUCHSCREEN_USB_E2I
902 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
903 depends on TOUCHSCREEN_USB_COMPOSITE
905 config TOUCHSCREEN_USB_ZYTRONIC
907 bool "Zytronic controller" if EXPERT
908 depends on TOUCHSCREEN_USB_COMPOSITE
910 config TOUCHSCREEN_USB_ETT_TC45USB
912 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
913 depends on TOUCHSCREEN_USB_COMPOSITE
915 config TOUCHSCREEN_USB_NEXIO
917 bool "NEXIO/iNexio device support" if EXPERT
918 depends on TOUCHSCREEN_USB_COMPOSITE
920 config TOUCHSCREEN_USB_EASYTOUCH
922 bool "EasyTouch USB Touch controller device support" if EMBEDDED
923 depends on TOUCHSCREEN_USB_COMPOSITE
925 Say Y here if you have an EasyTouch USB Touch controller.
928 config TOUCHSCREEN_TOUCHIT213
929 tristate "Sahara TouchIT-213 touchscreen"
932 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
936 To compile this driver as a module, choose M here: the
937 module will be called touchit213.
939 config TOUCHSCREEN_TSC_SERIO
940 tristate "TSC-10/25/40 serial touchscreen support"
943 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
948 To compile this driver as a module, choose M here: the
949 module will be called tsc40.
951 config TOUCHSCREEN_TSC200X_CORE
954 config TOUCHSCREEN_TSC2004
955 tristate "TSC2004 based touchscreens"
958 select TOUCHSCREEN_TSC200X_CORE
960 Say Y here if you have a TSC2004 based touchscreen.
964 To compile this driver as a module, choose M here: the
965 module will be called tsc2004.
967 config TOUCHSCREEN_TSC2005
968 tristate "TSC2005 based touchscreens"
969 depends on SPI_MASTER
971 select TOUCHSCREEN_TSC200X_CORE
973 Say Y here if you have a TSC2005 based touchscreen.
977 To compile this driver as a module, choose M here: the
978 module will be called tsc2005.
980 config TOUCHSCREEN_TSC2007
981 tristate "TSC2007 based touchscreens"
984 Say Y here if you have a TSC2007 based touchscreen.
988 To compile this driver as a module, choose M here: the
989 module will be called tsc2007.
991 config TOUCHSCREEN_W90X900
992 tristate "W90P910 touchscreen driver"
993 depends on ARCH_W90X900
995 Say Y here if you have a W90P910 based touchscreen.
997 To compile this driver as a module, choose M here: the
998 module will be called w90p910_ts.
1000 config TOUCHSCREEN_PCAP
1001 tristate "Motorola PCAP touchscreen"
1004 Say Y here if you have a Motorola EZX telephone and
1005 want to enable support for the built-in touchscreen.
1007 To compile this driver as a module, choose M here: the
1008 module will be called pcap_ts.
1010 config TOUCHSCREEN_ST1232
1011 tristate "Sitronix ST1232 touchscreen controllers"
1014 Say Y here if you want to support Sitronix ST1232
1015 touchscreen controller.
1019 To compile this driver as a module, choose M here: the
1020 module will be called st1232_ts.
1022 config TOUCHSCREEN_STMPE
1023 tristate "STMicroelectronics STMPE touchscreens"
1024 depends on MFD_STMPE
1025 depends on (OF || COMPILE_TEST)
1027 Say Y here if you want support for STMicroelectronics
1028 STMPE touchscreen controllers.
1030 To compile this driver as a module, choose M here: the
1031 module will be called stmpe-ts.
1033 config TOUCHSCREEN_SUN4I
1034 tristate "Allwinner sun4i resistive touchscreen controller support"
1035 depends on ARCH_SUNXI || COMPILE_TEST
1037 depends on THERMAL || !THERMAL_OF
1039 This selects support for the resistive touchscreen controller
1040 found on Allwinner sunxi SoCs.
1042 To compile this driver as a module, choose M here: the
1043 module will be called sun4i-ts.
1045 config TOUCHSCREEN_SUR40
1046 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1047 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1048 depends on VIDEO_V4L2
1049 select INPUT_POLLDEV
1050 select VIDEOBUF2_DMA_SG
1052 Say Y here if you want support for the Samsung SUR40 touchscreen
1053 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1055 To compile this driver as a module, choose M here: the
1056 module will be called sur40.
1058 config TOUCHSCREEN_SX8654
1059 tristate "Semtech SX8654 touchscreen"
1062 Say Y here if you have a Semtech SX8654 touchscreen controller.
1066 To compile this driver as a module, choose M here: the
1067 module will be called sx8654.
1069 config TOUCHSCREEN_TPS6507X
1070 tristate "TPS6507x based touchscreens"
1072 select INPUT_POLLDEV
1074 Say Y here if you have a TPS6507x based touchscreen
1079 To compile this driver as a module, choose M here: the
1080 module will be called tps6507x_ts.
1082 config TOUCHSCREEN_ZFORCE
1083 tristate "Neonode zForce infrared touchscreens"
1085 depends on GPIOLIB || COMPILE_TEST
1087 Say Y here if you have a touchscreen using the zforce
1088 infraread technology from Neonode.
1092 To compile this driver as a module, choose M here: the
1093 module will be called zforce_ts.
1095 config TOUCHSCREEN_COLIBRI_VF50
1096 tristate "Toradex Colibri on board touchscreen driver"
1097 depends on GPIOLIB && IIO && VF610_ADC
1099 Say Y here if you have a Colibri VF50 and plan to use
1100 the on-board provided 4-wire touchscreen driver.
1104 To compile this driver as a module, choose M here: the
1105 module will be called colibri_vf50_ts.
1107 config TOUCHSCREEN_ROHM_BU21023
1108 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1111 Say Y here if you have a touchscreen using ROHM BU21023/24.
1115 To compile this driver as a module, choose M here: the
1116 module will be called bu21023_ts.