2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_PROPERTIES
18 config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
30 config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
33 depends on HWMON = n || HWMON
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
44 If unsure, say N (but it's safe to say "Y").
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
49 config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
57 If unsure, say N (but it's safe to say "Y").
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
62 config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
68 You should select a bus connection too.
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
73 config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
79 To compile this driver as a module, choose M here: the
80 module will be called ad7879-i2c.
82 config TOUCHSCREEN_AD7879_SPI
83 tristate "support SPI bus connection"
84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
88 If unsure, say N (but it's safe to say "Y").
90 To compile this driver as a module, choose M here: the
91 module will be called ad7879-spi.
93 config TOUCHSCREEN_AR1021_I2C
94 tristate "Microchip AR1021 i2c touchscreen"
97 Say Y here if you have the Microchip AR1021 touchscreen controller
102 To compile this driver as a module, choose M here: the
103 module will be called ar1021_i2c.
105 config TOUCHSCREEN_ATMEL_MXT
106 tristate "Atmel mXT I2C Touchscreen"
110 Say Y here if you have Atmel mXT series I2C touchscreen,
111 such as AT42QT602240/ATMXT224, connected to your system.
115 To compile this driver as a module, choose M here: the
116 module will be called atmel_mxt_ts.
118 config TOUCHSCREEN_AUO_PIXCIR
119 tristate "AUO in-cell touchscreen using Pixcir ICs"
121 depends on GPIOLIB || COMPILE_TEST
123 Say Y here if you have a AUO display with in-cell touchscreen
128 To compile this driver as a module, choose M here: the
129 module will be called auo-pixcir-ts.
131 config TOUCHSCREEN_BU21013
132 tristate "BU21013 based touch panel controllers"
135 Say Y here if you have a bu21013 touchscreen connected to
140 To compile this driver as a module, choose M here: the
141 module will be called bu21013_ts.
143 config TOUCHSCREEN_CHIPONE_ICN8318
144 tristate "chipone icn8318 touchscreen controller"
145 depends on GPIOLIB || COMPILE_TEST
149 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
153 To compile this driver as a module, choose M here: the
154 module will be called chipone_icn8318.
156 config TOUCHSCREEN_CY8CTMG110
157 tristate "cy8ctmg110 touchscreen"
159 depends on GPIOLIB || COMPILE_TEST
161 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
166 To compile this driver as a module, choose M here: the
167 module will be called cy8ctmg110_ts.
169 config TOUCHSCREEN_CYTTSP_CORE
170 tristate "Cypress TTSP touchscreen"
172 Say Y here if you have a touchscreen using controller from
173 the Cypress TrueTouch(tm) Standard Product family connected
174 to your system. You will also need to select appropriate
175 bus connection below.
179 To compile this driver as a module, choose M here: the
180 module will be called cyttsp_core.
182 config TOUCHSCREEN_CYTTSP_I2C
183 tristate "support I2C bus connection"
184 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
186 Say Y here if the touchscreen is connected via I2C bus.
188 To compile this driver as a module, choose M here: the
189 module will be called cyttsp_i2c.
191 config TOUCHSCREEN_CYTTSP_SPI
192 tristate "support SPI bus connection"
193 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
195 Say Y here if the touchscreen is connected via SPI bus.
197 To compile this driver as a module, choose M here: the
198 module will be called cyttsp_spi.
200 config TOUCHSCREEN_CYTTSP4_CORE
201 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
203 Core driver for Cypress TrueTouch(tm) Standard Product
204 Generation4 touchscreen controllers.
206 Say Y here if you have a Cypress Gen4 touchscreen.
210 To compile this driver as a module, choose M here.
212 config TOUCHSCREEN_CYTTSP4_I2C
213 tristate "support I2C bus connection"
214 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
216 Say Y here if the touchscreen is connected via I2C bus.
218 To compile this driver as a module, choose M here: the
219 module will be called cyttsp4_i2c.
221 config TOUCHSCREEN_CYTTSP4_SPI
222 tristate "support SPI bus connection"
223 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
225 Say Y here if the touchscreen is connected via SPI bus.
227 To compile this driver as a module, choose M here: the
228 module will be called cyttsp4_spi.
230 config TOUCHSCREEN_DA9034
231 tristate "Touchscreen support for Dialog Semiconductor DA9034"
232 depends on PMIC_DA903X
235 Say Y here to enable the support for the touchscreen found
236 on Dialog Semiconductor DA9034 PMIC.
240 To compile this driver as a module, choose M here: the
241 module will be called da9034-ts.
243 config TOUCHSCREEN_DA9052
244 tristate "Dialog DA9052/DA9053 TSI"
245 depends on PMIC_DA9052
247 Say Y here to support the touchscreen found on Dialog Semiconductor
248 DA9052-BC and DA9053-AA/Bx PMICs.
252 To compile this driver as a module, choose M here: the
253 module will be called da9052_tsi.
255 config TOUCHSCREEN_DYNAPRO
256 tristate "Dynapro serial touchscreen"
259 Say Y here if you have a Dynapro serial touchscreen connected to
264 To compile this driver as a module, choose M here: the
265 module will be called dynapro.
267 config TOUCHSCREEN_HAMPSHIRE
268 tristate "Hampshire serial touchscreen"
271 Say Y here if you have a Hampshire serial touchscreen connected to
276 To compile this driver as a module, choose M here: the
277 module will be called hampshire.
279 config TOUCHSCREEN_EETI
280 tristate "EETI touchscreen panel support"
283 Say Y here to enable support for I2C connected EETI touch panels.
285 To compile this driver as a module, choose M here: the
286 module will be called eeti_ts.
288 config TOUCHSCREEN_EGALAX
289 tristate "EETI eGalax multi-touch panel support"
292 Say Y here to enable support for I2C connected EETI
293 eGalax multi-touch panels.
295 To compile this driver as a module, choose M here: the
296 module will be called egalax_ts.
298 config TOUCHSCREEN_FT6236
299 tristate "FT6236 I2C touchscreen"
301 depends on GPIOLIB || COMPILE_TEST
303 Say Y here to enable support for the I2C connected FT6x06 and
304 FT6x36 family of capacitive touchscreen drivers.
308 To compile this driver as a module, choose M here: the
309 module will be called ft6236.
311 config TOUCHSCREEN_FUJITSU
312 tristate "Fujitsu serial touchscreen"
315 Say Y here if you have the Fujitsu touchscreen (such as one
316 installed in Lifebook P series laptop) connected to your
321 To compile this driver as a module, choose M here: the
322 module will be called fujitsu-ts.
324 config TOUCHSCREEN_GOODIX
325 tristate "Goodix I2C touchscreen"
328 Say Y here if you have the Goodix touchscreen (such as one
329 installed in Onda v975w tablets) connected to your
330 system. It also supports 5-finger chip models, which can be
331 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
335 To compile this driver as a module, choose M here: the
336 module will be called goodix.
338 config TOUCHSCREEN_GSLX680_VR
339 tristate "gslX680 touchpad driver for VR"
341 gslX680 touchpad driver for VR
343 config TOUCHSCREEN_GSL3673
344 tristate "gsl3673 touchpad driver for evb"
346 gsl3673 touchpad driver for evb
348 config TOUCHSCREEN_GT9XX
349 tristate "Goodix gt9xx support for rockchip platform"
350 depends on I2C && ARCH_ROCKCHIP
352 Say Y here if you have a touchscreen interface using the gt9xx
353 on Rockchip platform, and your board-specific initialization
354 code includes that in its table of IIC devices.
357 config TOUCHSCREEN_ILI210X
358 tristate "Ilitek ILI210X based touchscreen"
361 Say Y here if you have a ILI210X based touchscreen
362 controller. This driver supports models ILI2102,
363 ILI2102s, ILI2103, ILI2103s and ILI2105.
364 Such kind of chipsets can be found in Amazon Kindle Fire
369 To compile this driver as a module, choose M here: the
370 module will be called ili210x.
372 config TOUCHSCREEN_IPROC
373 tristate "IPROC touch panel driver support"
374 depends on ARCH_BCM_IPROC || COMPILE_TEST
376 Say Y here if you want to add support for the IPROC touch
377 controller to your system.
381 To compile this driver as a module, choose M here: the
382 module will be called bcm_iproc_tsc.
384 config TOUCHSCREEN_S3C2410
385 tristate "Samsung S3C2410/generic touchscreen input driver"
386 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
389 Say Y here if you have the s3c2410 touchscreen.
393 To compile this driver as a module, choose M here: the
394 module will be called s3c2410_ts.
396 config TOUCHSCREEN_GUNZE
397 tristate "Gunze AHL-51S touchscreen"
400 Say Y here if you have the Gunze AHL-51 touchscreen connected to
405 To compile this driver as a module, choose M here: the
406 module will be called gunze.
408 config TOUCHSCREEN_ELAN
409 tristate "Elan eKTH I2C touchscreen"
412 Say Y here if you have an Elan eKTH I2C touchscreen
413 connected to your system.
417 To compile this driver as a module, choose M here: the
418 module will be called elants_i2c.
420 config TOUCHSCREEN_ELO
421 tristate "Elo serial touchscreens"
424 Say Y here if you have an Elo serial touchscreen connected to
429 To compile this driver as a module, choose M here: the
430 module will be called elo.
432 config TOUCHSCREEN_WACOM_W8001
433 tristate "Wacom W8001 penabled serial touchscreen"
436 Say Y here if you have an Wacom W8001 penabled serial touchscreen
437 connected to your system.
441 To compile this driver as a module, choose M here: the
442 module will be called wacom_w8001.
444 config TOUCHSCREEN_WACOM_I2C
445 tristate "Wacom Tablet support (I2C)"
448 Say Y here if you want to use the I2C version of the Wacom
453 To compile this driver as a module, choose M here: the module
454 will be called wacom_i2c.
456 config TOUCHSCREEN_LPC32XX
457 tristate "LPC32XX touchscreen controller"
458 depends on ARCH_LPC32XX
460 Say Y here if you have a LPC32XX device and want
461 to support the built-in touchscreen.
463 To compile this driver as a module, choose M here: the
464 module will be called lpc32xx_ts.
466 config TOUCHSCREEN_MAX11801
467 tristate "MAX11801 based touchscreens"
470 Say Y here if you have a MAX11801 based touchscreen
475 To compile this driver as a module, choose M here: the
476 module will be called max11801_ts.
478 config TOUCHSCREEN_MCS5000
479 tristate "MELFAS MCS-5000 touchscreen"
482 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
487 To compile this driver as a module, choose M here: the
488 module will be called mcs5000_ts.
490 config TOUCHSCREEN_MMS114
491 tristate "MELFAS MMS114 touchscreen"
494 Say Y here if you have the MELFAS MMS114 touchscreen controller
499 To compile this driver as a module, choose M here: the
500 module will be called mms114.
502 config TOUCHSCREEN_MTOUCH
503 tristate "MicroTouch serial touchscreens"
506 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
511 To compile this driver as a module, choose M here: the
512 module will be called mtouch.
514 config TOUCHSCREEN_IMX6UL_TSC
515 tristate "Freescale i.MX6UL touchscreen controller"
516 depends on (OF && GPIOLIB) || COMPILE_TEST
518 Say Y here if you have a Freescale i.MX6UL, and want to
519 use the internal touchscreen controller.
523 To compile this driver as a module, choose M here: the
524 module will be called imx6ul_tsc.
526 config TOUCHSCREEN_INEXIO
527 tristate "iNexio serial touchscreens"
530 Say Y here if you have an iNexio serial touchscreen connected to
535 To compile this driver as a module, choose M here: the
536 module will be called inexio.
538 config TOUCHSCREEN_INTEL_MID
539 tristate "Intel MID platform resistive touchscreen"
540 depends on INTEL_SCU_IPC
542 Say Y here if you have a Intel MID based touchscreen in
547 To compile this driver as a module, choose M here: the
548 module will be called intel_mid_touch.
550 config TOUCHSCREEN_MK712
551 tristate "ICS MicroClock MK712 touchscreen"
553 Say Y here if you have the ICS MicroClock MK712 touchscreen
554 controller chip in your system.
558 To compile this driver as a module, choose M here: the
559 module will be called mk712.
561 config TOUCHSCREEN_HP600
562 tristate "HP Jornada 6xx touchscreen"
563 depends on SH_HP6XX && SH_ADC
565 Say Y here if you have a HP Jornada 620/660/680/690 and want to
566 support the built-in touchscreen.
568 To compile this driver as a module, choose M here: the
569 module will be called hp680_ts_input.
571 config TOUCHSCREEN_HP7XX
572 tristate "HP Jornada 7xx touchscreen"
573 depends on SA1100_JORNADA720_SSP
575 Say Y here if you have a HP Jornada 710/720/728 and want
576 to support the built-in touchscreen.
578 To compile this driver as a module, choose M here: the
579 module will be called jornada720_ts.
581 config TOUCHSCREEN_IPAQ_MICRO
582 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
583 depends on MFD_IPAQ_MICRO
585 Say Y here to enable support for the touchscreen attached to
586 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
590 To compile this driver as a module, choose M here: the
591 module will be called ipaq-micro-ts.
593 config TOUCHSCREEN_HTCPEN
594 tristate "HTC Shift X9500 touchscreen"
597 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
598 Clio / Shangrila and want to support the built-in touchscreen.
602 To compile this driver as a module, choose M here: the
603 module will be called htcpen.
605 config TOUCHSCREEN_PENMOUNT
606 tristate "Penmount serial touchscreen"
609 Say Y here if you have a Penmount serial touchscreen connected to
614 To compile this driver as a module, choose M here: the
615 module will be called penmount.
617 config TOUCHSCREEN_EDT_FT5X06
618 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
621 Say Y here if you have an EDT "Polytouch" touchscreen based
622 on the FocalTech FT5x06 family of controllers connected to
627 To compile this driver as a module, choose M here: the
628 module will be called edt-ft5x06.
630 config TOUCHSCREEN_MIGOR
631 tristate "Renesas MIGO-R touchscreen"
632 depends on SH_MIGOR && I2C
634 Say Y here to enable MIGO-R touchscreen support.
638 To compile this driver as a module, choose M here: the
639 module will be called migor_ts.
641 config TOUCHSCREEN_TOUCHRIGHT
642 tristate "Touchright serial touchscreen"
645 Say Y here if you have a Touchright serial touchscreen connected to
650 To compile this driver as a module, choose M here: the
651 module will be called touchright.
653 config TOUCHSCREEN_TOUCHWIN
654 tristate "Touchwin serial touchscreen"
657 Say Y here if you have a Touchwin serial touchscreen connected to
662 To compile this driver as a module, choose M here: the
663 module will be called touchwin.
665 config TOUCHSCREEN_TI_AM335X_TSC
666 tristate "TI Touchscreen Interface"
667 depends on MFD_TI_AM335X_TSCADC
669 Say Y here if you have 4/5/8 wire touchscreen controller
670 to be connected to the ADC controller on your TI AM335x SoC.
674 To compile this driver as a module, choose M here: the
675 module will be called ti_am335x_tsc.
677 config TOUCHSCREEN_UCB1400
678 tristate "Philips UCB1400 touchscreen"
680 depends on UCB1400_CORE
682 This enables support for the Philips UCB1400 touchscreen interface.
683 The UCB1400 is an AC97 audio codec. The touchscreen interface
684 will be initialized only after the ALSA subsystem has been
685 brought up and the UCB1400 detected. You therefore have to
686 configure ALSA support as well (either built-in or modular,
687 independently of whether this driver is itself built-in or
688 modular) for this driver to work.
690 To compile this driver as a module, choose M here: the
691 module will be called ucb1400_ts.
693 config TOUCHSCREEN_PIXCIR
694 tristate "PIXCIR I2C touchscreens"
697 Say Y here if you have a pixcir i2c touchscreen
702 To compile this driver as a module, choose M here: the
703 module will be called pixcir_i2c_ts.
705 config TOUCHSCREEN_WDT87XX_I2C
706 tristate "Weida HiTech I2C touchscreen"
709 Say Y here if you have a Weida WDT87XX I2C touchscreen
710 connected to your system.
714 To compile this driver as a module, choose M here: the
715 module will be called wdt87xx_i2c.
717 config TOUCHSCREEN_WM831X
718 tristate "Support for WM831x touchscreen controllers"
719 depends on MFD_WM831X
721 This enables support for the touchscreen controller on the WM831x
724 To compile this driver as a module, choose M here: the
725 module will be called wm831x-ts.
727 config TOUCHSCREEN_WM97XX
728 tristate "Support for WM97xx AC97 touchscreen controllers"
731 Say Y here if you have a Wolfson Microelectronics WM97xx
732 touchscreen connected to your system. Note that this option
733 only enables core driver, you will also need to select
734 support for appropriate chip below.
738 To compile this driver as a module, choose M here: the
739 module will be called wm97xx-ts.
741 config TOUCHSCREEN_WM9705
742 bool "WM9705 Touchscreen interface support"
743 depends on TOUCHSCREEN_WM97XX
746 Say Y here to enable support for the Wolfson Microelectronics
747 WM9705 touchscreen controller.
749 config TOUCHSCREEN_WM9712
750 bool "WM9712 Touchscreen interface support"
751 depends on TOUCHSCREEN_WM97XX
754 Say Y here to enable support for the Wolfson Microelectronics
755 WM9712 touchscreen controller.
757 config TOUCHSCREEN_WM9713
758 bool "WM9713 Touchscreen interface support"
759 depends on TOUCHSCREEN_WM97XX
762 Say Y here to enable support for the Wolfson Microelectronics
763 WM9713 touchscreen controller.
765 config TOUCHSCREEN_WM97XX_ATMEL
766 tristate "WM97xx Atmel accelerated touch"
767 depends on TOUCHSCREEN_WM97XX && AVR32
769 Say Y here for support for streaming mode with WM97xx touchscreens
770 on Atmel AT91 or AVR32 systems with an AC97C module.
772 Be aware that this will use channel B in the controller for
773 streaming data, this must not conflict with other AC97C drivers.
777 To compile this driver as a module, choose M here: the module will
778 be called atmel-wm97xx.
780 config TOUCHSCREEN_WM97XX_MAINSTONE
781 tristate "WM97xx Mainstone/Palm accelerated touch"
782 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
784 Say Y here for support for streaming mode with WM97xx touchscreens
785 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
789 To compile this driver as a module, choose M here: the
790 module will be called mainstone-wm97xx.
792 config TOUCHSCREEN_WM97XX_ZYLONITE
793 tristate "Zylonite accelerated touch"
794 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
795 select TOUCHSCREEN_WM9713
797 Say Y here for support for streaming mode with the touchscreen
802 To compile this driver as a module, choose M here: the
803 module will be called zylonite-wm97xx.
805 config TOUCHSCREEN_USB_COMPOSITE
806 tristate "USB Touchscreen Driver"
807 depends on USB_ARCH_HAS_HCD
810 USB Touchscreen driver for:
811 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
812 - PanJit TouchSet USB
813 - 3M MicroTouch USB (EX II series)
815 - some other eTurboTouch
818 - IRTOUCHSYSTEMS/UNITOP
820 - GoTop Super_Q2/GogoPen/PenPower tablets
821 - JASTEC USB Touch Controller/DigiTech DTR-02U
822 - Zytronic controllers
823 - Elo TouchSystems 2700 IntelliTouch
824 - EasyTouch USB Touch Controller from Data Modul
825 - e2i (Mimo monitors)
827 Have a look at <http://linux.chapter7.ch/touchkit/> for
828 a usage description and the required user-space stuff.
830 To compile this driver as a module, choose M here: the
831 module will be called usbtouchscreen.
833 config TOUCHSCREEN_MC13783
834 tristate "Freescale MC13783 touchscreen input driver"
835 depends on MFD_MC13XXX
837 Say Y here if you have an Freescale MC13783 PMIC on your
838 board and want to use its touchscreen
842 To compile this driver as a module, choose M here: the
843 module will be called mc13783_ts.
845 config TOUCHSCREEN_USB_EGALAX
847 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
848 depends on TOUCHSCREEN_USB_COMPOSITE
850 config TOUCHSCREEN_USB_PANJIT
852 bool "PanJit device support" if EXPERT
853 depends on TOUCHSCREEN_USB_COMPOSITE
855 config TOUCHSCREEN_USB_3M
857 bool "3M/Microtouch EX II series device support" if EXPERT
858 depends on TOUCHSCREEN_USB_COMPOSITE
860 config TOUCHSCREEN_USB_ITM
862 bool "ITM device support" if EXPERT
863 depends on TOUCHSCREEN_USB_COMPOSITE
865 config TOUCHSCREEN_USB_ETURBO
867 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
868 depends on TOUCHSCREEN_USB_COMPOSITE
870 config TOUCHSCREEN_USB_GUNZE
872 bool "Gunze AHL61 device support" if EXPERT
873 depends on TOUCHSCREEN_USB_COMPOSITE
875 config TOUCHSCREEN_USB_DMC_TSC10
877 bool "DMC TSC-10/25 device support" if EXPERT
878 depends on TOUCHSCREEN_USB_COMPOSITE
880 config TOUCHSCREEN_USB_IRTOUCH
882 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
883 depends on TOUCHSCREEN_USB_COMPOSITE
885 config TOUCHSCREEN_USB_IDEALTEK
887 bool "IdealTEK URTC1000 device support" if EXPERT
888 depends on TOUCHSCREEN_USB_COMPOSITE
890 config TOUCHSCREEN_USB_GENERAL_TOUCH
892 bool "GeneralTouch Touchscreen device support" if EXPERT
893 depends on TOUCHSCREEN_USB_COMPOSITE
895 config TOUCHSCREEN_USB_GOTOP
897 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
898 depends on TOUCHSCREEN_USB_COMPOSITE
900 config TOUCHSCREEN_USB_JASTEC
902 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
903 depends on TOUCHSCREEN_USB_COMPOSITE
905 config TOUCHSCREEN_USB_ELO
907 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
908 depends on TOUCHSCREEN_USB_COMPOSITE
910 config TOUCHSCREEN_USB_E2I
912 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
913 depends on TOUCHSCREEN_USB_COMPOSITE
915 config TOUCHSCREEN_USB_ZYTRONIC
917 bool "Zytronic controller" if EXPERT
918 depends on TOUCHSCREEN_USB_COMPOSITE
920 config TOUCHSCREEN_USB_ETT_TC45USB
922 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
923 depends on TOUCHSCREEN_USB_COMPOSITE
925 config TOUCHSCREEN_USB_NEXIO
927 bool "NEXIO/iNexio device support" if EXPERT
928 depends on TOUCHSCREEN_USB_COMPOSITE
930 config TOUCHSCREEN_USB_EASYTOUCH
932 bool "EasyTouch USB Touch controller device support" if EMBEDDED
933 depends on TOUCHSCREEN_USB_COMPOSITE
935 Say Y here if you have an EasyTouch USB Touch controller.
938 config TOUCHSCREEN_TOUCHIT213
939 tristate "Sahara TouchIT-213 touchscreen"
942 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
946 To compile this driver as a module, choose M here: the
947 module will be called touchit213.
949 config TOUCHSCREEN_TSC_SERIO
950 tristate "TSC-10/25/40 serial touchscreen support"
953 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
958 To compile this driver as a module, choose M here: the
959 module will be called tsc40.
961 config TOUCHSCREEN_TSC200X_CORE
964 config TOUCHSCREEN_TSC2004
965 tristate "TSC2004 based touchscreens"
968 select TOUCHSCREEN_TSC200X_CORE
970 Say Y here if you have a TSC2004 based touchscreen.
974 To compile this driver as a module, choose M here: the
975 module will be called tsc2004.
977 config TOUCHSCREEN_TSC2005
978 tristate "TSC2005 based touchscreens"
979 depends on SPI_MASTER
981 select TOUCHSCREEN_TSC200X_CORE
983 Say Y here if you have a TSC2005 based touchscreen.
987 To compile this driver as a module, choose M here: the
988 module will be called tsc2005.
990 config TOUCHSCREEN_TSC2007
991 tristate "TSC2007 based touchscreens"
994 Say Y here if you have a TSC2007 based touchscreen.
998 To compile this driver as a module, choose M here: the
999 module will be called tsc2007.
1001 config TOUCHSCREEN_W90X900
1002 tristate "W90P910 touchscreen driver"
1003 depends on ARCH_W90X900
1005 Say Y here if you have a W90P910 based touchscreen.
1007 To compile this driver as a module, choose M here: the
1008 module will be called w90p910_ts.
1010 config TOUCHSCREEN_PCAP
1011 tristate "Motorola PCAP touchscreen"
1014 Say Y here if you have a Motorola EZX telephone and
1015 want to enable support for the built-in touchscreen.
1017 To compile this driver as a module, choose M here: the
1018 module will be called pcap_ts.
1020 config TOUCHSCREEN_ST1232
1021 tristate "Sitronix ST1232 touchscreen controllers"
1024 Say Y here if you want to support Sitronix ST1232
1025 touchscreen controller.
1029 To compile this driver as a module, choose M here: the
1030 module will be called st1232_ts.
1032 config TOUCHSCREEN_STMPE
1033 tristate "STMicroelectronics STMPE touchscreens"
1034 depends on MFD_STMPE
1035 depends on (OF || COMPILE_TEST)
1037 Say Y here if you want support for STMicroelectronics
1038 STMPE touchscreen controllers.
1040 To compile this driver as a module, choose M here: the
1041 module will be called stmpe-ts.
1043 config TOUCHSCREEN_SUN4I
1044 tristate "Allwinner sun4i resistive touchscreen controller support"
1045 depends on ARCH_SUNXI || COMPILE_TEST
1047 depends on THERMAL || !THERMAL_OF
1049 This selects support for the resistive touchscreen controller
1050 found on Allwinner sunxi SoCs.
1052 To compile this driver as a module, choose M here: the
1053 module will be called sun4i-ts.
1055 config TOUCHSCREEN_SUR40
1056 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1057 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1058 depends on VIDEO_V4L2
1059 select INPUT_POLLDEV
1060 select VIDEOBUF2_DMA_SG
1062 Say Y here if you want support for the Samsung SUR40 touchscreen
1063 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1065 To compile this driver as a module, choose M here: the
1066 module will be called sur40.
1068 config TOUCHSCREEN_SX8654
1069 tristate "Semtech SX8654 touchscreen"
1072 Say Y here if you have a Semtech SX8654 touchscreen controller.
1076 To compile this driver as a module, choose M here: the
1077 module will be called sx8654.
1079 config TOUCHSCREEN_TPS6507X
1080 tristate "TPS6507x based touchscreens"
1082 select INPUT_POLLDEV
1084 Say Y here if you have a TPS6507x based touchscreen
1089 To compile this driver as a module, choose M here: the
1090 module will be called tps6507x_ts.
1092 config TOUCHSCREEN_ZFORCE
1093 tristate "Neonode zForce infrared touchscreens"
1095 depends on GPIOLIB || COMPILE_TEST
1097 Say Y here if you have a touchscreen using the zforce
1098 infraread technology from Neonode.
1102 To compile this driver as a module, choose M here: the
1103 module will be called zforce_ts.
1105 config TOUCHSCREEN_COLIBRI_VF50
1106 tristate "Toradex Colibri on board touchscreen driver"
1107 depends on GPIOLIB && IIO && VF610_ADC
1109 Say Y here if you have a Colibri VF50 and plan to use
1110 the on-board provided 4-wire touchscreen driver.
1114 To compile this driver as a module, choose M here: the
1115 module will be called colibri_vf50_ts.
1117 config TOUCHSCREEN_ROHM_BU21023
1118 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1121 Say Y here if you have a touchscreen using ROHM BU21023/24.
1125 To compile this driver as a module, choose M here: the
1126 module will be called bu21023_ts.