2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_GT8XX
15 tristate "Goodix touch screen gt801X2 support for rockchip based platform"
17 Say Y here if you have a touchscreen interface using the
18 two goodix gt801 , and your board-specific initialization
19 code includes that in its table of IIC devices.
22 config TOUCHSCREEN_88PM860X
23 tristate "Marvell 88PM860x touchscreen"
24 depends on MFD_88PM860X
26 Say Y here if you have a 88PM860x PMIC and want to enable
27 support for the built-in touchscreen.
31 To compile this driver as a module, choose M here: the
32 module will be called 88pm860x-ts.
34 config TOUCHSCREEN_ADS7846
35 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
37 depends on HWMON = n || HWMON
39 Say Y here if you have a touchscreen interface using the
40 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
41 and your board-specific setup code includes that in its
44 If HWMON is selected, and the driver is told the reference voltage
45 on your board, you will also get hwmon interfaces for the voltage
46 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
48 If unsure, say N (but it's safe to say "Y").
50 To compile this driver as a module, choose M here: the
51 module will be called ads7846.
53 config TOUCHSCREEN_AD7877
54 tristate "AD7877 based touchscreens"
57 Say Y here if you have a touchscreen interface using the
58 AD7877 controller, and your board-specific initialization
59 code includes that in its table of SPI devices.
61 If unsure, say N (but it's safe to say "Y").
63 To compile this driver as a module, choose M here: the
64 module will be called ad7877.
66 config TOUCHSCREEN_AD7879
67 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
69 Say Y here if you want to support a touchscreen interface using
70 the AD7879-1/AD7889-1 controller.
72 You should select a bus connection too.
74 To compile this driver as a module, choose M here: the
75 module will be called ad7879.
77 config TOUCHSCREEN_AD7879_I2C
78 tristate "support I2C bus connection"
79 depends on TOUCHSCREEN_AD7879 && I2C
81 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
83 To compile this driver as a module, choose M here: the
84 module will be called ad7879-i2c.
86 config TOUCHSCREEN_AD7879_SPI
87 tristate "support SPI bus connection"
88 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
90 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
92 If unsure, say N (but it's safe to say "Y").
94 To compile this driver as a module, choose M here: the
95 module will be called ad7879-spi.
97 config TOUCHSCREEN_ATMEL_MXT
98 tristate "Atmel mXT I2C Touchscreen"
101 Say Y here if you have Atmel mXT series I2C touchscreen,
102 such as AT42QT602240/ATMXT224, connected to your system.
106 To compile this driver as a module, choose M here: the
107 module will be called atmel_mxt_ts.
109 config TOUCHSCREEN_AUO_PIXCIR
110 tristate "AUO in-cell touchscreen using Pixcir ICs"
114 Say Y here if you have a AUO display with in-cell touchscreen
119 To compile this driver as a module, choose M here: the
120 module will be called auo-pixcir-ts.
122 config TOUCHSCREEN_BU21013
123 tristate "BU21013 based touch panel controllers"
126 Say Y here if you have a bu21013 touchscreen connected to
131 To compile this driver as a module, choose M here: the
132 module will be called bu21013_ts.
134 config TOUCHSCREEN_CY8CTMG110
135 tristate "cy8ctmg110 touchscreen"
139 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
144 To compile this driver as a module, choose M here: the
145 module will be called cy8ctmg110_ts.
147 config TOUCHSCREEN_CYTTSP_CORE
148 tristate "Cypress TTSP touchscreen"
150 Say Y here if you have a touchscreen using controller from
151 the Cypress TrueTouch(tm) Standard Product family connected
152 to your system. You will also need to select appropriate
153 bus connection below.
157 To compile this driver as a module, choose M here: the
158 module will be called cyttsp_core.
160 config TOUCHSCREEN_CYTTSP_I2C
161 tristate "support I2C bus connection"
162 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
164 Say Y here if the touchscreen is connected via I2C bus.
166 To compile this driver as a module, choose M here: the
167 module will be called cyttsp_i2c.
169 config TOUCHSCREEN_CYTTSP_SPI
170 tristate "support SPI bus connection"
171 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
173 Say Y here if the touchscreen is connected via SPI bus.
175 To compile this driver as a module, choose M here: the
176 module will be called cyttsp_spi.
178 config TOUCHSCREEN_DA9034
179 tristate "Touchscreen support for Dialog Semiconductor DA9034"
180 depends on PMIC_DA903X
183 Say Y here to enable the support for the touchscreen found
184 on Dialog Semiconductor DA9034 PMIC.
188 To compile this driver as a module, choose M here: the
189 module will be called da9034-ts.
191 config TOUCHSCREEN_DA9052
192 tristate "Dialog DA9052/DA9053 TSI"
193 depends on PMIC_DA9052
195 Say Y here to support the touchscreen found on Dialog Semiconductor
196 DA9052-BC and DA9053-AA/Bx PMICs.
200 To compile this driver as a module, choose M here: the
201 module will be called da9052_tsi.
203 config TOUCHSCREEN_DYNAPRO
204 tristate "Dynapro serial touchscreen"
207 Say Y here if you have a Dynapro serial touchscreen connected to
212 To compile this driver as a module, choose M here: the
213 module will be called dynapro.
215 config TOUCHSCREEN_HAMPSHIRE
216 tristate "Hampshire serial touchscreen"
219 Say Y here if you have a Hampshire serial touchscreen connected to
224 To compile this driver as a module, choose M here: the
225 module will be called hampshire.
227 config TOUCHSCREEN_EETI
228 tristate "EETI touchscreen panel support"
231 Say Y here to enable support for I2C connected EETI touch panels.
233 To compile this driver as a module, choose M here: the
234 module will be called eeti_ts.
236 config TOUCHSCREEN_EGALAX
237 tristate "EETI eGalax multi-touch panel support"
240 Say Y here to enable support for I2C connected EETI
241 eGalax multi-touch panels.
243 To compile this driver as a module, choose M here: the
244 module will be called egalax_ts.
246 config TOUCHSCREEN_FUJITSU
247 tristate "Fujitsu serial touchscreen"
250 Say Y here if you have the Fujitsu touchscreen (such as one
251 installed in Lifebook P series laptop) connected to your
256 To compile this driver as a module, choose M here: the
257 module will be called fujitsu-ts.
259 config TOUCHSCREEN_ILI210X
260 tristate "Ilitek ILI210X based touchscreen"
263 Say Y here if you have a ILI210X based touchscreen
264 controller. This driver supports models ILI2102,
265 ILI2102s, ILI2103, ILI2103s and ILI2105.
266 Such kind of chipsets can be found in Amazon Kindle Fire
271 To compile this driver as a module, choose M here: the
272 module will be called ili210x.
274 config TOUCHSCREEN_S3C2410
275 tristate "Samsung S3C2410/generic touchscreen input driver"
276 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
279 Say Y here if you have the s3c2410 touchscreen.
283 To compile this driver as a module, choose M here: the
284 module will be called s3c2410_ts.
286 config TOUCHSCREEN_GUNZE
287 tristate "Gunze AHL-51S touchscreen"
290 Say Y here if you have the Gunze AHL-51 touchscreen connected to
295 To compile this driver as a module, choose M here: the
296 module will be called gunze.
298 config TOUCHSCREEN_ELO
299 tristate "Elo serial touchscreens"
302 Say Y here if you have an Elo serial touchscreen connected to
307 To compile this driver as a module, choose M here: the
308 module will be called elo.
310 config TOUCHSCREEN_WACOM_W8001
311 tristate "Wacom W8001 penabled serial touchscreen"
314 Say Y here if you have an Wacom W8001 penabled serial touchscreen
315 connected to your system.
319 To compile this driver as a module, choose M here: the
320 module will be called wacom_w8001.
322 config TOUCHSCREEN_WACOM_I2C
323 tristate "Wacom Tablet support (I2C)"
326 Say Y here if you want to use the I2C version of the Wacom
331 To compile this driver as a module, choose M here: the module
332 will be called wacom_i2c.
334 config TOUCHSCREEN_LPC32XX
335 tristate "LPC32XX touchscreen controller"
336 depends on ARCH_LPC32XX
338 Say Y here if you have a LPC32XX device and want
339 to support the built-in touchscreen.
341 To compile this driver as a module, choose M here: the
342 module will be called lpc32xx_ts.
344 config TOUCHSCREEN_MAX11801
345 tristate "MAX11801 based touchscreens"
348 Say Y here if you have a MAX11801 based touchscreen
353 To compile this driver as a module, choose M here: the
354 module will be called max11801_ts.
356 config TOUCHSCREEN_MCS5000
357 tristate "MELFAS MCS-5000 touchscreen"
360 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
365 To compile this driver as a module, choose M here: the
366 module will be called mcs5000_ts.
368 config TOUCHSCREEN_MMS114
369 tristate "MELFAS MMS114 touchscreen"
370 depends on I2C && GENERIC_HARDIRQS
372 Say Y here if you have the MELFAS MMS114 touchscreen controller
377 To compile this driver as a module, choose M here: the
378 module will be called mms114.
380 config TOUCHSCREEN_MTOUCH
381 tristate "MicroTouch serial touchscreens"
384 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
389 To compile this driver as a module, choose M here: the
390 module will be called mtouch.
392 config TOUCHSCREEN_INEXIO
393 tristate "iNexio serial touchscreens"
396 Say Y here if you have an iNexio serial touchscreen connected to
401 To compile this driver as a module, choose M here: the
402 module will be called inexio.
404 config TOUCHSCREEN_INTEL_MID
405 tristate "Intel MID platform resistive touchscreen"
406 depends on INTEL_SCU_IPC
408 Say Y here if you have a Intel MID based touchscreen in
413 To compile this driver as a module, choose M here: the
414 module will be called intel_mid_touch.
416 config TOUCHSCREEN_MK712
417 tristate "ICS MicroClock MK712 touchscreen"
419 Say Y here if you have the ICS MicroClock MK712 touchscreen
420 controller chip in your system.
424 To compile this driver as a module, choose M here: the
425 module will be called mk712.
427 config TOUCHSCREEN_HP600
428 tristate "HP Jornada 6xx touchscreen"
429 depends on SH_HP6XX && SH_ADC
431 Say Y here if you have a HP Jornada 620/660/680/690 and want to
432 support the built-in touchscreen.
434 To compile this driver as a module, choose M here: the
435 module will be called hp680_ts_input.
437 config TOUCHSCREEN_HP7XX
438 tristate "HP Jornada 7xx touchscreen"
439 depends on SA1100_JORNADA720_SSP
441 Say Y here if you have a HP Jornada 710/720/728 and want
442 to support the built-in touchscreen.
444 To compile this driver as a module, choose M here: the
445 module will be called jornada720_ts.
447 config TOUCHSCREEN_HTCPEN
448 tristate "HTC Shift X9500 touchscreen"
451 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
452 Clio / Shangrila and want to support the built-in touchscreen.
456 To compile this driver as a module, choose M here: the
457 module will be called htcpen.
459 config TOUCHSCREEN_PENMOUNT
460 tristate "Penmount serial touchscreen"
463 Say Y here if you have a Penmount serial touchscreen connected to
468 To compile this driver as a module, choose M here: the
469 module will be called penmount.
471 config TOUCHSCREEN_EDT_FT5X06
472 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
475 Say Y here if you have an EDT "Polytouch" touchscreen based
476 on the FocalTech FT5x06 family of controllers connected to
481 To compile this driver as a module, choose M here: the
482 module will be called edt-ft5x06.
484 config TOUCHSCREEN_MIGOR
485 tristate "Renesas MIGO-R touchscreen"
486 depends on SH_MIGOR && I2C
488 Say Y here to enable MIGO-R touchscreen support.
492 To compile this driver as a module, choose M here: the
493 module will be called migor_ts.
495 config TOUCHSCREEN_TNETV107X
496 tristate "TI TNETV107X touchscreen support"
497 depends on ARCH_DAVINCI_TNETV107X
499 Say Y here if you want to use the TNETV107X touchscreen.
501 To compile this driver as a module, choose M here: the
502 module will be called tnetv107x-ts.
504 config TOUCHSCREEN_TOUCHRIGHT
505 tristate "Touchright serial touchscreen"
508 Say Y here if you have a Touchright serial touchscreen connected to
513 To compile this driver as a module, choose M here: the
514 module will be called touchright.
516 config TOUCHSCREEN_TOUCHWIN
517 tristate "Touchwin serial touchscreen"
520 Say Y here if you have a Touchwin serial touchscreen connected to
525 To compile this driver as a module, choose M here: the
526 module will be called touchwin.
528 config TOUCHSCREEN_TI_AM335X_TSC
529 tristate "TI Touchscreen Interface"
530 depends on MFD_TI_AM335X_TSCADC
532 Say Y here if you have 4/5/8 wire touchscreen controller
533 to be connected to the ADC controller on your TI AM335x SoC.
537 To compile this driver as a module, choose M here: the
538 module will be called ti_am335x_tsc.
540 config TOUCHSCREEN_ATMEL_TSADCC
541 tristate "Atmel Touchscreen Interface"
544 Say Y here if you have a 4-wire touchscreen connected to the
545 ADC Controller on your Atmel SoC.
549 To compile this driver as a module, choose M here: the
550 module will be called atmel_tsadcc.
552 config TOUCHSCREEN_UCB1400
553 tristate "Philips UCB1400 touchscreen"
555 depends on UCB1400_CORE
557 This enables support for the Philips UCB1400 touchscreen interface.
558 The UCB1400 is an AC97 audio codec. The touchscreen interface
559 will be initialized only after the ALSA subsystem has been
560 brought up and the UCB1400 detected. You therefore have to
561 configure ALSA support as well (either built-in or modular,
562 independently of whether this driver is itself built-in or
563 modular) for this driver to work.
565 To compile this driver as a module, choose M here: the
566 module will be called ucb1400_ts.
568 config TOUCHSCREEN_PIXCIR
569 tristate "PIXCIR I2C touchscreens"
572 Say Y here if you have a pixcir i2c touchscreen
577 To compile this driver as a module, choose M here: the
578 module will be called pixcir_i2c_ts.
580 config TOUCHSCREEN_WM831X
581 tristate "Support for WM831x touchscreen controllers"
582 depends on MFD_WM831X
584 This enables support for the touchscreen controller on the WM831x
587 To compile this driver as a module, choose M here: the
588 module will be called wm831x-ts.
590 config TOUCHSCREEN_WM97XX
591 tristate "Support for WM97xx AC97 touchscreen controllers"
594 Say Y here if you have a Wolfson Microelectronics WM97xx
595 touchscreen connected to your system. Note that this option
596 only enables core driver, you will also need to select
597 support for appropriate chip below.
601 To compile this driver as a module, choose M here: the
602 module will be called wm97xx-ts.
604 config TOUCHSCREEN_WM9705
605 bool "WM9705 Touchscreen interface support"
606 depends on TOUCHSCREEN_WM97XX
609 Say Y here to enable support for the Wolfson Microelectronics
610 WM9705 touchscreen controller.
612 config TOUCHSCREEN_WM9712
613 bool "WM9712 Touchscreen interface support"
614 depends on TOUCHSCREEN_WM97XX
617 Say Y here to enable support for the Wolfson Microelectronics
618 WM9712 touchscreen controller.
620 config TOUCHSCREEN_WM9713
621 bool "WM9713 Touchscreen interface support"
622 depends on TOUCHSCREEN_WM97XX
625 Say Y here to enable support for the Wolfson Microelectronics
626 WM9713 touchscreen controller.
628 config TOUCHSCREEN_WM97XX_ATMEL
629 tristate "WM97xx Atmel accelerated touch"
630 depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
632 Say Y here for support for streaming mode with WM97xx touchscreens
633 on Atmel AT91 or AVR32 systems with an AC97C module.
635 Be aware that this will use channel B in the controller for
636 streaming data, this must not conflict with other AC97C drivers.
640 To compile this driver as a module, choose M here: the module will
641 be called atmel-wm97xx.
643 config TOUCHSCREEN_WM97XX_MAINSTONE
644 tristate "WM97xx Mainstone/Palm accelerated touch"
645 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
647 Say Y here for support for streaming mode with WM97xx touchscreens
648 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
652 To compile this driver as a module, choose M here: the
653 module will be called mainstone-wm97xx.
655 config TOUCHSCREEN_WM97XX_ZYLONITE
656 tristate "Zylonite accelerated touch"
657 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
658 select TOUCHSCREEN_WM9713
660 Say Y here for support for streaming mode with the touchscreen
665 To compile this driver as a module, choose M here: the
666 module will be called zylonite-wm97xx.
668 config TOUCHSCREEN_USB_COMPOSITE
669 tristate "USB Touchscreen Driver"
670 depends on USB_ARCH_HAS_HCD
673 USB Touchscreen driver for:
674 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
675 - PanJit TouchSet USB
676 - 3M MicroTouch USB (EX II series)
678 - some other eTurboTouch
681 - IRTOUCHSYSTEMS/UNITOP
683 - GoTop Super_Q2/GogoPen/PenPower tablets
684 - JASTEC USB Touch Controller/DigiTech DTR-02U
685 - Zytronic controllers
686 - Elo TouchSystems 2700 IntelliTouch
687 - EasyTouch USB Touch Controller from Data Modul
688 - e2i (Mimo monitors)
690 Have a look at <http://linux.chapter7.ch/touchkit/> for
691 a usage description and the required user-space stuff.
693 To compile this driver as a module, choose M here: the
694 module will be called usbtouchscreen.
696 config TOUCHSCREEN_MC13783
697 tristate "Freescale MC13783 touchscreen input driver"
698 depends on MFD_MC13783
700 Say Y here if you have an Freescale MC13783 PMIC on your
701 board and want to use its touchscreen
705 To compile this driver as a module, choose M here: the
706 module will be called mc13783_ts.
708 config TOUCHSCREEN_USB_EGALAX
710 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
711 depends on TOUCHSCREEN_USB_COMPOSITE
713 config TOUCHSCREEN_USB_PANJIT
715 bool "PanJit device support" if EXPERT
716 depends on TOUCHSCREEN_USB_COMPOSITE
718 config TOUCHSCREEN_USB_3M
720 bool "3M/Microtouch EX II series device support" if EXPERT
721 depends on TOUCHSCREEN_USB_COMPOSITE
723 config TOUCHSCREEN_USB_ITM
725 bool "ITM device support" if EXPERT
726 depends on TOUCHSCREEN_USB_COMPOSITE
728 config TOUCHSCREEN_USB_ETURBO
730 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
731 depends on TOUCHSCREEN_USB_COMPOSITE
733 config TOUCHSCREEN_USB_GUNZE
735 bool "Gunze AHL61 device support" if EXPERT
736 depends on TOUCHSCREEN_USB_COMPOSITE
738 config TOUCHSCREEN_USB_DMC_TSC10
740 bool "DMC TSC-10/25 device support" if EXPERT
741 depends on TOUCHSCREEN_USB_COMPOSITE
743 config TOUCHSCREEN_USB_IRTOUCH
745 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
746 depends on TOUCHSCREEN_USB_COMPOSITE
748 config TOUCHSCREEN_USB_IDEALTEK
750 bool "IdealTEK URTC1000 device support" if EXPERT
751 depends on TOUCHSCREEN_USB_COMPOSITE
753 config TOUCHSCREEN_USB_GENERAL_TOUCH
755 bool "GeneralTouch Touchscreen device support" if EXPERT
756 depends on TOUCHSCREEN_USB_COMPOSITE
758 config TOUCHSCREEN_USB_GOTOP
760 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
761 depends on TOUCHSCREEN_USB_COMPOSITE
763 config TOUCHSCREEN_USB_JASTEC
765 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
766 depends on TOUCHSCREEN_USB_COMPOSITE
768 config TOUCHSCREEN_USB_ELO
770 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
771 depends on TOUCHSCREEN_USB_COMPOSITE
773 config TOUCHSCREEN_USB_E2I
775 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
776 depends on TOUCHSCREEN_USB_COMPOSITE
778 config TOUCHSCREEN_USB_ZYTRONIC
780 bool "Zytronic controller" if EXPERT
781 depends on TOUCHSCREEN_USB_COMPOSITE
783 config TOUCHSCREEN_USB_ETT_TC45USB
785 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
786 depends on TOUCHSCREEN_USB_COMPOSITE
788 config TOUCHSCREEN_USB_NEXIO
790 bool "NEXIO/iNexio device support" if EXPERT
791 depends on TOUCHSCREEN_USB_COMPOSITE
793 config TOUCHSCREEN_USB_EASYTOUCH
795 bool "EasyTouch USB Touch controller device support" if EMBEDDED
796 depends on TOUCHSCREEN_USB_COMPOSITE
798 Say Y here if you have an EasyTouch USB Touch controller.
801 config TOUCHSCREEN_TOUCHIT213
802 tristate "Sahara TouchIT-213 touchscreen"
805 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
809 To compile this driver as a module, choose M here: the
810 module will be called touchit213.
812 config TOUCHSCREEN_TSC_SERIO
813 tristate "TSC-10/25/40 serial touchscreen support"
816 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
821 To compile this driver as a module, choose M here: the
822 module will be called tsc40.
824 config TOUCHSCREEN_TSC2005
825 tristate "TSC2005 based touchscreens"
826 depends on SPI_MASTER && GENERIC_HARDIRQS
828 Say Y here if you have a TSC2005 based touchscreen.
832 To compile this driver as a module, choose M here: the
833 module will be called tsc2005.
835 config TOUCHSCREEN_TSC2007
836 tristate "TSC2007 based touchscreens"
839 Say Y here if you have a TSC2007 based touchscreen.
843 To compile this driver as a module, choose M here: the
844 module will be called tsc2007.
846 config TOUCHSCREEN_W90X900
847 tristate "W90P910 touchscreen driver"
850 Say Y here if you have a W90P910 based touchscreen.
852 To compile this driver as a module, choose M here: the
853 module will be called w90p910_ts.
855 config TOUCHSCREEN_PCAP
856 tristate "Motorola PCAP touchscreen"
859 Say Y here if you have a Motorola EZX telephone and
860 want to enable support for the built-in touchscreen.
862 To compile this driver as a module, choose M here: the
863 module will be called pcap_ts.
865 config TOUCHSCREEN_ST1232
866 tristate "Sitronix ST1232 touchscreen controllers"
869 Say Y here if you want to support Sitronix ST1232
870 touchscreen controller.
874 To compile this driver as a module, choose M here: the
875 module will be called st1232_ts.
877 config TOUCHSCREEN_STMPE
878 tristate "STMicroelectronics STMPE touchscreens"
881 Say Y here if you want support for STMicroelectronics
882 STMPE touchscreen controllers.
884 To compile this driver as a module, choose M here: the
885 module will be called stmpe-ts.
887 config TOUCHSCREEN_TPS6507X
888 tristate "TPS6507x based touchscreens"
891 Say Y here if you have a TPS6507x based touchscreen
896 To compile this driver as a module, choose M here: the
897 module will be called tps6507x_ts.