2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_GT8XX
15 tristate "Goodix touch screen gt801X2 support for rockchip based platform"
17 Say Y here if you have a touchscreen interface using the
18 two goodix gt801 , and your board-specific initialization
19 code includes that in its table of IIC devices.
22 config TOUCHSCREEN_CT36X_TS
23 tristate "CT36X touchscreens support"
25 config TOUCHSCREEN_VTL_CT36X
26 tristate "VTL touchscreens support"
28 config TOUCHSCREEN_88PM860X
29 tristate "Marvell 88PM860x touchscreen"
30 depends on MFD_88PM860X
32 Say Y here if you have a 88PM860x PMIC and want to enable
33 support for the built-in touchscreen.
37 To compile this driver as a module, choose M here: the
38 module will be called 88pm860x-ts.
40 config TOUCHSCREEN_ADS7846
41 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
43 depends on HWMON = n || HWMON
45 Say Y here if you have a touchscreen interface using the
46 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
47 and your board-specific setup code includes that in its
50 If HWMON is selected, and the driver is told the reference voltage
51 on your board, you will also get hwmon interfaces for the voltage
52 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
54 If unsure, say N (but it's safe to say "Y").
56 To compile this driver as a module, choose M here: the
57 module will be called ads7846.
59 config TOUCHSCREEN_AD7877
60 tristate "AD7877 based touchscreens"
63 Say Y here if you have a touchscreen interface using the
64 AD7877 controller, and your board-specific initialization
65 code includes that in its table of SPI devices.
67 If unsure, say N (but it's safe to say "Y").
69 To compile this driver as a module, choose M here: the
70 module will be called ad7877.
72 config TOUCHSCREEN_AD7879
73 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
75 Say Y here if you want to support a touchscreen interface using
76 the AD7879-1/AD7889-1 controller.
78 You should select a bus connection too.
80 To compile this driver as a module, choose M here: the
81 module will be called ad7879.
83 config TOUCHSCREEN_AD7879_I2C
84 tristate "support I2C bus connection"
85 depends on TOUCHSCREEN_AD7879 && I2C
87 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
89 To compile this driver as a module, choose M here: the
90 module will be called ad7879-i2c.
92 config TOUCHSCREEN_AD7879_SPI
93 tristate "support SPI bus connection"
94 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
96 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
98 If unsure, say N (but it's safe to say "Y").
100 To compile this driver as a module, choose M here: the
101 module will be called ad7879-spi.
103 config TOUCHSCREEN_ATMEL_MXT
104 tristate "Atmel mXT I2C Touchscreen"
107 Say Y here if you have Atmel mXT series I2C touchscreen,
108 such as AT42QT602240/ATMXT224, connected to your system.
112 To compile this driver as a module, choose M here: the
113 module will be called atmel_mxt_ts.
115 config TOUCHSCREEN_AUO_PIXCIR
116 tristate "AUO in-cell touchscreen using Pixcir ICs"
120 Say Y here if you have a AUO display with in-cell touchscreen
125 To compile this driver as a module, choose M here: the
126 module will be called auo-pixcir-ts.
128 config TOUCHSCREEN_BU21013
129 tristate "BU21013 based touch panel controllers"
132 Say Y here if you have a bu21013 touchscreen connected to
137 To compile this driver as a module, choose M here: the
138 module will be called bu21013_ts.
140 config TOUCHSCREEN_CY8CTMG110
141 tristate "cy8ctmg110 touchscreen"
145 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
150 To compile this driver as a module, choose M here: the
151 module will be called cy8ctmg110_ts.
153 config TOUCHSCREEN_CYTTSP_CORE
154 tristate "Cypress TTSP touchscreen"
156 Say Y here if you have a touchscreen using controller from
157 the Cypress TrueTouch(tm) Standard Product family connected
158 to your system. You will also need to select appropriate
159 bus connection below.
163 To compile this driver as a module, choose M here: the
164 module will be called cyttsp_core.
166 config TOUCHSCREEN_CYTTSP_I2C
167 tristate "support I2C bus connection"
168 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
170 Say Y here if the touchscreen is connected via I2C bus.
172 To compile this driver as a module, choose M here: the
173 module will be called cyttsp_i2c.
175 config TOUCHSCREEN_CYTTSP_SPI
176 tristate "support SPI bus connection"
177 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
179 Say Y here if the touchscreen is connected via SPI bus.
181 To compile this driver as a module, choose M here: the
182 module will be called cyttsp_spi.
184 config TOUCHSCREEN_DA9034
185 tristate "Touchscreen support for Dialog Semiconductor DA9034"
186 depends on PMIC_DA903X
189 Say Y here to enable the support for the touchscreen found
190 on Dialog Semiconductor DA9034 PMIC.
194 To compile this driver as a module, choose M here: the
195 module will be called da9034-ts.
197 config TOUCHSCREEN_DA9052
198 tristate "Dialog DA9052/DA9053 TSI"
199 depends on PMIC_DA9052
201 Say Y here to support the touchscreen found on Dialog Semiconductor
202 DA9052-BC and DA9053-AA/Bx PMICs.
206 To compile this driver as a module, choose M here: the
207 module will be called da9052_tsi.
209 config TOUCHSCREEN_DYNAPRO
210 tristate "Dynapro serial touchscreen"
213 Say Y here if you have a Dynapro serial touchscreen connected to
218 To compile this driver as a module, choose M here: the
219 module will be called dynapro.
221 config TOUCHSCREEN_HAMPSHIRE
222 tristate "Hampshire serial touchscreen"
225 Say Y here if you have a Hampshire serial touchscreen connected to
230 To compile this driver as a module, choose M here: the
231 module will be called hampshire.
233 config TOUCHSCREEN_EETI
234 tristate "EETI touchscreen panel support"
237 Say Y here to enable support for I2C connected EETI touch panels.
239 To compile this driver as a module, choose M here: the
240 module will be called eeti_ts.
242 config TOUCHSCREEN_EGALAX
243 tristate "EETI eGalax multi-touch panel support"
246 Say Y here to enable support for I2C connected EETI
247 eGalax multi-touch panels.
249 To compile this driver as a module, choose M here: the
250 module will be called egalax_ts.
252 config TOUCHSCREEN_FUJITSU
253 tristate "Fujitsu serial touchscreen"
256 Say Y here if you have the Fujitsu touchscreen (such as one
257 installed in Lifebook P series laptop) connected to your
262 To compile this driver as a module, choose M here: the
263 module will be called fujitsu-ts.
265 config TOUCHSCREEN_ILI210X
266 tristate "Ilitek ILI210X based touchscreen"
269 Say Y here if you have a ILI210X based touchscreen
270 controller. This driver supports models ILI2102,
271 ILI2102s, ILI2103, ILI2103s and ILI2105.
272 Such kind of chipsets can be found in Amazon Kindle Fire
277 To compile this driver as a module, choose M here: the
278 module will be called ili210x.
280 config TOUCHSCREEN_S3C2410
281 tristate "Samsung S3C2410/generic touchscreen input driver"
282 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
285 Say Y here if you have the s3c2410 touchscreen.
289 To compile this driver as a module, choose M here: the
290 module will be called s3c2410_ts.
292 config TOUCHSCREEN_GUNZE
293 tristate "Gunze AHL-51S touchscreen"
296 Say Y here if you have the Gunze AHL-51 touchscreen connected to
301 To compile this driver as a module, choose M here: the
302 module will be called gunze.
304 config TOUCHSCREEN_ELO
305 tristate "Elo serial touchscreens"
308 Say Y here if you have an Elo serial touchscreen connected to
313 To compile this driver as a module, choose M here: the
314 module will be called elo.
316 config TOUCHSCREEN_WACOM_W8001
317 tristate "Wacom W8001 penabled serial touchscreen"
320 Say Y here if you have an Wacom W8001 penabled serial touchscreen
321 connected to your system.
325 To compile this driver as a module, choose M here: the
326 module will be called wacom_w8001.
328 config TOUCHSCREEN_WACOM_I2C
329 tristate "Wacom Tablet support (I2C)"
332 Say Y here if you want to use the I2C version of the Wacom
337 To compile this driver as a module, choose M here: the module
338 will be called wacom_i2c.
340 config TOUCHSCREEN_LPC32XX
341 tristate "LPC32XX touchscreen controller"
342 depends on ARCH_LPC32XX
344 Say Y here if you have a LPC32XX device and want
345 to support the built-in touchscreen.
347 To compile this driver as a module, choose M here: the
348 module will be called lpc32xx_ts.
350 config TOUCHSCREEN_MAX11801
351 tristate "MAX11801 based touchscreens"
354 Say Y here if you have a MAX11801 based touchscreen
359 To compile this driver as a module, choose M here: the
360 module will be called max11801_ts.
362 config TOUCHSCREEN_MCS5000
363 tristate "MELFAS MCS-5000 touchscreen"
366 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
371 To compile this driver as a module, choose M here: the
372 module will be called mcs5000_ts.
374 config TOUCHSCREEN_MMS114
375 tristate "MELFAS MMS114 touchscreen"
376 depends on I2C && GENERIC_HARDIRQS
378 Say Y here if you have the MELFAS MMS114 touchscreen controller
383 To compile this driver as a module, choose M here: the
384 module will be called mms114.
386 config TOUCHSCREEN_MTOUCH
387 tristate "MicroTouch serial touchscreens"
390 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
395 To compile this driver as a module, choose M here: the
396 module will be called mtouch.
398 config TOUCHSCREEN_INEXIO
399 tristate "iNexio serial touchscreens"
402 Say Y here if you have an iNexio serial touchscreen connected to
407 To compile this driver as a module, choose M here: the
408 module will be called inexio.
410 config TOUCHSCREEN_INTEL_MID
411 tristate "Intel MID platform resistive touchscreen"
412 depends on INTEL_SCU_IPC
414 Say Y here if you have a Intel MID based touchscreen in
419 To compile this driver as a module, choose M here: the
420 module will be called intel_mid_touch.
422 config TOUCHSCREEN_MK712
423 tristate "ICS MicroClock MK712 touchscreen"
425 Say Y here if you have the ICS MicroClock MK712 touchscreen
426 controller chip in your system.
430 To compile this driver as a module, choose M here: the
431 module will be called mk712.
433 config TOUCHSCREEN_HP600
434 tristate "HP Jornada 6xx touchscreen"
435 depends on SH_HP6XX && SH_ADC
437 Say Y here if you have a HP Jornada 620/660/680/690 and want to
438 support the built-in touchscreen.
440 To compile this driver as a module, choose M here: the
441 module will be called hp680_ts_input.
443 config TOUCHSCREEN_HP7XX
444 tristate "HP Jornada 7xx touchscreen"
445 depends on SA1100_JORNADA720_SSP
447 Say Y here if you have a HP Jornada 710/720/728 and want
448 to support the built-in touchscreen.
450 To compile this driver as a module, choose M here: the
451 module will be called jornada720_ts.
453 config TOUCHSCREEN_HTCPEN
454 tristate "HTC Shift X9500 touchscreen"
457 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
458 Clio / Shangrila and want to support the built-in touchscreen.
462 To compile this driver as a module, choose M here: the
463 module will be called htcpen.
465 config TOUCHSCREEN_PENMOUNT
466 tristate "Penmount serial touchscreen"
469 Say Y here if you have a Penmount serial touchscreen connected to
474 To compile this driver as a module, choose M here: the
475 module will be called penmount.
477 config TOUCHSCREEN_EDT_FT5X06
478 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
481 Say Y here if you have an EDT "Polytouch" touchscreen based
482 on the FocalTech FT5x06 family of controllers connected to
487 To compile this driver as a module, choose M here: the
488 module will be called edt-ft5x06.
490 config TOUCHSCREEN_MIGOR
491 tristate "Renesas MIGO-R touchscreen"
492 depends on SH_MIGOR && I2C
494 Say Y here to enable MIGO-R touchscreen support.
498 To compile this driver as a module, choose M here: the
499 module will be called migor_ts.
501 config TOUCHSCREEN_TNETV107X
502 tristate "TI TNETV107X touchscreen support"
503 depends on ARCH_DAVINCI_TNETV107X
505 Say Y here if you want to use the TNETV107X touchscreen.
507 To compile this driver as a module, choose M here: the
508 module will be called tnetv107x-ts.
510 config TOUCHSCREEN_TOUCHRIGHT
511 tristate "Touchright serial touchscreen"
514 Say Y here if you have a Touchright serial touchscreen connected to
519 To compile this driver as a module, choose M here: the
520 module will be called touchright.
522 config TOUCHSCREEN_TOUCHWIN
523 tristate "Touchwin serial touchscreen"
526 Say Y here if you have a Touchwin serial touchscreen connected to
531 To compile this driver as a module, choose M here: the
532 module will be called touchwin.
534 config TOUCHSCREEN_TI_AM335X_TSC
535 tristate "TI Touchscreen Interface"
536 depends on MFD_TI_AM335X_TSCADC
538 Say Y here if you have 4/5/8 wire touchscreen controller
539 to be connected to the ADC controller on your TI AM335x SoC.
543 To compile this driver as a module, choose M here: the
544 module will be called ti_am335x_tsc.
546 config TOUCHSCREEN_ATMEL_TSADCC
547 tristate "Atmel Touchscreen Interface"
550 Say Y here if you have a 4-wire touchscreen connected to the
551 ADC Controller on your Atmel SoC.
555 To compile this driver as a module, choose M here: the
556 module will be called atmel_tsadcc.
558 config TOUCHSCREEN_UCB1400
559 tristate "Philips UCB1400 touchscreen"
561 depends on UCB1400_CORE
563 This enables support for the Philips UCB1400 touchscreen interface.
564 The UCB1400 is an AC97 audio codec. The touchscreen interface
565 will be initialized only after the ALSA subsystem has been
566 brought up and the UCB1400 detected. You therefore have to
567 configure ALSA support as well (either built-in or modular,
568 independently of whether this driver is itself built-in or
569 modular) for this driver to work.
571 To compile this driver as a module, choose M here: the
572 module will be called ucb1400_ts.
574 config TOUCHSCREEN_PIXCIR
575 tristate "PIXCIR I2C touchscreens"
578 Say Y here if you have a pixcir i2c touchscreen
583 To compile this driver as a module, choose M here: the
584 module will be called pixcir_i2c_ts.
586 config TOUCHSCREEN_WM831X
587 tristate "Support for WM831x touchscreen controllers"
588 depends on MFD_WM831X
590 This enables support for the touchscreen controller on the WM831x
593 To compile this driver as a module, choose M here: the
594 module will be called wm831x-ts.
596 config TOUCHSCREEN_WM97XX
597 tristate "Support for WM97xx AC97 touchscreen controllers"
600 Say Y here if you have a Wolfson Microelectronics WM97xx
601 touchscreen connected to your system. Note that this option
602 only enables core driver, you will also need to select
603 support for appropriate chip below.
607 To compile this driver as a module, choose M here: the
608 module will be called wm97xx-ts.
610 config TOUCHSCREEN_WM9705
611 bool "WM9705 Touchscreen interface support"
612 depends on TOUCHSCREEN_WM97XX
615 Say Y here to enable support for the Wolfson Microelectronics
616 WM9705 touchscreen controller.
618 config TOUCHSCREEN_WM9712
619 bool "WM9712 Touchscreen interface support"
620 depends on TOUCHSCREEN_WM97XX
623 Say Y here to enable support for the Wolfson Microelectronics
624 WM9712 touchscreen controller.
626 config TOUCHSCREEN_WM9713
627 bool "WM9713 Touchscreen interface support"
628 depends on TOUCHSCREEN_WM97XX
631 Say Y here to enable support for the Wolfson Microelectronics
632 WM9713 touchscreen controller.
634 config TOUCHSCREEN_WM97XX_ATMEL
635 tristate "WM97xx Atmel accelerated touch"
636 depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
638 Say Y here for support for streaming mode with WM97xx touchscreens
639 on Atmel AT91 or AVR32 systems with an AC97C module.
641 Be aware that this will use channel B in the controller for
642 streaming data, this must not conflict with other AC97C drivers.
646 To compile this driver as a module, choose M here: the module will
647 be called atmel-wm97xx.
649 config TOUCHSCREEN_WM97XX_MAINSTONE
650 tristate "WM97xx Mainstone/Palm accelerated touch"
651 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
653 Say Y here for support for streaming mode with WM97xx touchscreens
654 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
658 To compile this driver as a module, choose M here: the
659 module will be called mainstone-wm97xx.
661 config TOUCHSCREEN_WM97XX_ZYLONITE
662 tristate "Zylonite accelerated touch"
663 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
664 select TOUCHSCREEN_WM9713
666 Say Y here for support for streaming mode with the touchscreen
671 To compile this driver as a module, choose M here: the
672 module will be called zylonite-wm97xx.
674 config TOUCHSCREEN_USB_COMPOSITE
675 tristate "USB Touchscreen Driver"
676 depends on USB_ARCH_HAS_HCD
679 USB Touchscreen driver for:
680 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
681 - PanJit TouchSet USB
682 - 3M MicroTouch USB (EX II series)
684 - some other eTurboTouch
687 - IRTOUCHSYSTEMS/UNITOP
689 - GoTop Super_Q2/GogoPen/PenPower tablets
690 - JASTEC USB Touch Controller/DigiTech DTR-02U
691 - Zytronic controllers
692 - Elo TouchSystems 2700 IntelliTouch
693 - EasyTouch USB Touch Controller from Data Modul
694 - e2i (Mimo monitors)
696 Have a look at <http://linux.chapter7.ch/touchkit/> for
697 a usage description and the required user-space stuff.
699 To compile this driver as a module, choose M here: the
700 module will be called usbtouchscreen.
702 config TOUCHSCREEN_MC13783
703 tristate "Freescale MC13783 touchscreen input driver"
704 depends on MFD_MC13783
706 Say Y here if you have an Freescale MC13783 PMIC on your
707 board and want to use its touchscreen
711 To compile this driver as a module, choose M here: the
712 module will be called mc13783_ts.
714 config TOUCHSCREEN_USB_EGALAX
716 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
717 depends on TOUCHSCREEN_USB_COMPOSITE
719 config TOUCHSCREEN_USB_PANJIT
721 bool "PanJit device support" if EXPERT
722 depends on TOUCHSCREEN_USB_COMPOSITE
724 config TOUCHSCREEN_USB_3M
726 bool "3M/Microtouch EX II series device support" if EXPERT
727 depends on TOUCHSCREEN_USB_COMPOSITE
729 config TOUCHSCREEN_USB_ITM
731 bool "ITM device support" if EXPERT
732 depends on TOUCHSCREEN_USB_COMPOSITE
734 config TOUCHSCREEN_USB_ETURBO
736 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
737 depends on TOUCHSCREEN_USB_COMPOSITE
739 config TOUCHSCREEN_USB_GUNZE
741 bool "Gunze AHL61 device support" if EXPERT
742 depends on TOUCHSCREEN_USB_COMPOSITE
744 config TOUCHSCREEN_USB_DMC_TSC10
746 bool "DMC TSC-10/25 device support" if EXPERT
747 depends on TOUCHSCREEN_USB_COMPOSITE
749 config TOUCHSCREEN_USB_IRTOUCH
751 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
752 depends on TOUCHSCREEN_USB_COMPOSITE
754 config TOUCHSCREEN_USB_IDEALTEK
756 bool "IdealTEK URTC1000 device support" if EXPERT
757 depends on TOUCHSCREEN_USB_COMPOSITE
759 config TOUCHSCREEN_USB_GENERAL_TOUCH
761 bool "GeneralTouch Touchscreen device support" if EXPERT
762 depends on TOUCHSCREEN_USB_COMPOSITE
764 config TOUCHSCREEN_USB_GOTOP
766 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
767 depends on TOUCHSCREEN_USB_COMPOSITE
769 config TOUCHSCREEN_USB_JASTEC
771 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
772 depends on TOUCHSCREEN_USB_COMPOSITE
774 config TOUCHSCREEN_USB_ELO
776 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
777 depends on TOUCHSCREEN_USB_COMPOSITE
779 config TOUCHSCREEN_USB_E2I
781 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
782 depends on TOUCHSCREEN_USB_COMPOSITE
784 config TOUCHSCREEN_USB_ZYTRONIC
786 bool "Zytronic controller" if EXPERT
787 depends on TOUCHSCREEN_USB_COMPOSITE
789 config TOUCHSCREEN_USB_ETT_TC45USB
791 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
792 depends on TOUCHSCREEN_USB_COMPOSITE
794 config TOUCHSCREEN_USB_NEXIO
796 bool "NEXIO/iNexio device support" if EXPERT
797 depends on TOUCHSCREEN_USB_COMPOSITE
799 config TOUCHSCREEN_USB_EASYTOUCH
801 bool "EasyTouch USB Touch controller device support" if EMBEDDED
802 depends on TOUCHSCREEN_USB_COMPOSITE
804 Say Y here if you have an EasyTouch USB Touch controller.
807 config TOUCHSCREEN_TOUCHIT213
808 tristate "Sahara TouchIT-213 touchscreen"
811 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
815 To compile this driver as a module, choose M here: the
816 module will be called touchit213.
818 config TOUCHSCREEN_TSC_SERIO
819 tristate "TSC-10/25/40 serial touchscreen support"
822 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
827 To compile this driver as a module, choose M here: the
828 module will be called tsc40.
830 config TOUCHSCREEN_TSC2005
831 tristate "TSC2005 based touchscreens"
832 depends on SPI_MASTER && GENERIC_HARDIRQS
834 Say Y here if you have a TSC2005 based touchscreen.
838 To compile this driver as a module, choose M here: the
839 module will be called tsc2005.
841 config TOUCHSCREEN_TSC2007
842 tristate "TSC2007 based touchscreens"
845 Say Y here if you have a TSC2007 based touchscreen.
849 To compile this driver as a module, choose M here: the
850 module will be called tsc2007.
852 config TOUCHSCREEN_W90X900
853 tristate "W90P910 touchscreen driver"
856 Say Y here if you have a W90P910 based touchscreen.
858 To compile this driver as a module, choose M here: the
859 module will be called w90p910_ts.
861 config TOUCHSCREEN_PCAP
862 tristate "Motorola PCAP touchscreen"
865 Say Y here if you have a Motorola EZX telephone and
866 want to enable support for the built-in touchscreen.
868 To compile this driver as a module, choose M here: the
869 module will be called pcap_ts.
871 config TOUCHSCREEN_ST1232
872 tristate "Sitronix ST1232 touchscreen controllers"
875 Say Y here if you want to support Sitronix ST1232
876 touchscreen controller.
880 To compile this driver as a module, choose M here: the
881 module will be called st1232_ts.
883 config TOUCHSCREEN_STMPE
884 tristate "STMicroelectronics STMPE touchscreens"
887 Say Y here if you want support for STMicroelectronics
888 STMPE touchscreen controllers.
890 To compile this driver as a module, choose M here: the
891 module will be called stmpe-ts.
893 config TOUCHSCREEN_TPS6507X
894 tristate "TPS6507x based touchscreens"
897 Say Y here if you have a TPS6507x based touchscreen
902 To compile this driver as a module, choose M here: the
903 module will be called tps6507x_ts.