2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_ZET62XX
15 tristate "zet62xx touchscreen driver"
17 zet62xx touchscreen driver
20 config TOUCHSCREEN_GSLX680
21 tristate "gslX680 touchscreen driver"
23 gslX680 touchscreen driver
25 config TOUCHSCREEN_GT8XX
26 tristate "Goodix touch screen gt801X2 support for rockchip based platform"
28 Say Y here if you have a touchscreen interface using the
29 two goodix gt801 , and your board-specific initialization
30 code includes that in its table of IIC devices.
33 config TOUCHSCREEN_GT9XX
34 tristate "Goodix touch screen gt9xx support for rockchip based platform"
36 Say Y here if you have a touchscreen interface using the
37 two goodix gt9xx, and your board-specific initialization
38 code includes that in its table of IIC devices.
41 config TOUCHSCREEN_CT36X_TS
42 tristate "CT36X touchscreens support"
44 config TOUCHSCREEN_VTL_CT36X
45 tristate "VTL touchscreens support"
47 config TOUCHSCREEN_88PM860X
48 tristate "Marvell 88PM860x touchscreen"
49 depends on MFD_88PM860X
51 Say Y here if you have a 88PM860x PMIC and want to enable
52 support for the built-in touchscreen.
56 To compile this driver as a module, choose M here: the
57 module will be called 88pm860x-ts.
59 config TOUCHSCREEN_ADS7846
60 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
62 depends on HWMON = n || HWMON
64 Say Y here if you have a touchscreen interface using the
65 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
66 and your board-specific setup code includes that in its
69 If HWMON is selected, and the driver is told the reference voltage
70 on your board, you will also get hwmon interfaces for the voltage
71 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
73 If unsure, say N (but it's safe to say "Y").
75 To compile this driver as a module, choose M here: the
76 module will be called ads7846.
78 config TOUCHSCREEN_AD7877
79 tristate "AD7877 based touchscreens"
82 Say Y here if you have a touchscreen interface using the
83 AD7877 controller, and your board-specific initialization
84 code includes that in its table of SPI devices.
86 If unsure, say N (but it's safe to say "Y").
88 To compile this driver as a module, choose M here: the
89 module will be called ad7877.
91 config TOUCHSCREEN_AD7879
92 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
94 Say Y here if you want to support a touchscreen interface using
95 the AD7879-1/AD7889-1 controller.
97 You should select a bus connection too.
99 To compile this driver as a module, choose M here: the
100 module will be called ad7879.
102 config TOUCHSCREEN_AD7879_I2C
103 tristate "support I2C bus connection"
104 depends on TOUCHSCREEN_AD7879 && I2C
106 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
108 To compile this driver as a module, choose M here: the
109 module will be called ad7879-i2c.
111 config TOUCHSCREEN_AD7879_SPI
112 tristate "support SPI bus connection"
113 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
115 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
117 If unsure, say N (but it's safe to say "Y").
119 To compile this driver as a module, choose M here: the
120 module will be called ad7879-spi.
122 config TOUCHSCREEN_ATMEL_MXT
123 tristate "Atmel mXT I2C Touchscreen"
126 Say Y here if you have Atmel mXT series I2C touchscreen,
127 such as AT42QT602240/ATMXT224, connected to your system.
131 To compile this driver as a module, choose M here: the
132 module will be called atmel_mxt_ts.
134 config TOUCHSCREEN_AUO_PIXCIR
135 tristate "AUO in-cell touchscreen using Pixcir ICs"
139 Say Y here if you have a AUO display with in-cell touchscreen
144 To compile this driver as a module, choose M here: the
145 module will be called auo-pixcir-ts.
147 config TOUCHSCREEN_BU21013
148 tristate "BU21013 based touch panel controllers"
151 Say Y here if you have a bu21013 touchscreen connected to
156 To compile this driver as a module, choose M here: the
157 module will be called bu21013_ts.
159 config TOUCHSCREEN_CY8CTMG110
160 tristate "cy8ctmg110 touchscreen"
164 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
169 To compile this driver as a module, choose M here: the
170 module will be called cy8ctmg110_ts.
172 config TOUCHSCREEN_CYTTSP_CORE
173 tristate "Cypress TTSP touchscreen"
175 Say Y here if you have a touchscreen using controller from
176 the Cypress TrueTouch(tm) Standard Product family connected
177 to your system. You will also need to select appropriate
178 bus connection below.
182 To compile this driver as a module, choose M here: the
183 module will be called cyttsp_core.
185 config TOUCHSCREEN_CYTTSP_I2C
186 tristate "support I2C bus connection"
187 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
189 Say Y here if the touchscreen is connected via I2C bus.
191 To compile this driver as a module, choose M here: the
192 module will be called cyttsp_i2c.
194 config TOUCHSCREEN_CYTTSP_SPI
195 tristate "support SPI bus connection"
196 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
198 Say Y here if the touchscreen is connected via SPI bus.
200 To compile this driver as a module, choose M here: the
201 module will be called cyttsp_spi.
203 config TOUCHSCREEN_DA9034
204 tristate "Touchscreen support for Dialog Semiconductor DA9034"
205 depends on PMIC_DA903X
208 Say Y here to enable the support for the touchscreen found
209 on Dialog Semiconductor DA9034 PMIC.
213 To compile this driver as a module, choose M here: the
214 module will be called da9034-ts.
216 config TOUCHSCREEN_DA9052
217 tristate "Dialog DA9052/DA9053 TSI"
218 depends on PMIC_DA9052
220 Say Y here to support the touchscreen found on Dialog Semiconductor
221 DA9052-BC and DA9053-AA/Bx PMICs.
225 To compile this driver as a module, choose M here: the
226 module will be called da9052_tsi.
228 config TOUCHSCREEN_DYNAPRO
229 tristate "Dynapro serial touchscreen"
232 Say Y here if you have a Dynapro serial touchscreen connected to
237 To compile this driver as a module, choose M here: the
238 module will be called dynapro.
240 config TOUCHSCREEN_HAMPSHIRE
241 tristate "Hampshire serial touchscreen"
244 Say Y here if you have a Hampshire serial touchscreen connected to
249 To compile this driver as a module, choose M here: the
250 module will be called hampshire.
252 config TOUCHSCREEN_EETI
253 tristate "EETI touchscreen panel support"
256 Say Y here to enable support for I2C connected EETI touch panels.
258 To compile this driver as a module, choose M here: the
259 module will be called eeti_ts.
261 config TOUCHSCREEN_EGALAX
262 tristate "EETI eGalax multi-touch panel support"
265 Say Y here to enable support for I2C connected EETI
266 eGalax multi-touch panels.
268 To compile this driver as a module, choose M here: the
269 module will be called egalax_ts.
271 config TOUCHSCREEN_FUJITSU
272 tristate "Fujitsu serial touchscreen"
275 Say Y here if you have the Fujitsu touchscreen (such as one
276 installed in Lifebook P series laptop) connected to your
281 To compile this driver as a module, choose M here: the
282 module will be called fujitsu-ts.
284 config TOUCHSCREEN_ILI210X
285 tristate "Ilitek ILI210X based touchscreen"
288 Say Y here if you have a ILI210X based touchscreen
289 controller. This driver supports models ILI2102,
290 ILI2102s, ILI2103, ILI2103s and ILI2105.
291 Such kind of chipsets can be found in Amazon Kindle Fire
296 To compile this driver as a module, choose M here: the
297 module will be called ili210x.
299 config TOUCHSCREEN_S3C2410
300 tristate "Samsung S3C2410/generic touchscreen input driver"
301 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
304 Say Y here if you have the s3c2410 touchscreen.
308 To compile this driver as a module, choose M here: the
309 module will be called s3c2410_ts.
311 config TOUCHSCREEN_GUNZE
312 tristate "Gunze AHL-51S touchscreen"
315 Say Y here if you have the Gunze AHL-51 touchscreen connected to
320 To compile this driver as a module, choose M here: the
321 module will be called gunze.
323 config TOUCHSCREEN_ELO
324 tristate "Elo serial touchscreens"
327 Say Y here if you have an Elo serial touchscreen connected to
332 To compile this driver as a module, choose M here: the
333 module will be called elo.
335 config TOUCHSCREEN_WACOM_W8001
336 tristate "Wacom W8001 penabled serial touchscreen"
339 Say Y here if you have an Wacom W8001 penabled serial touchscreen
340 connected to your system.
344 To compile this driver as a module, choose M here: the
345 module will be called wacom_w8001.
347 config TOUCHSCREEN_WACOM_I2C
348 tristate "Wacom Tablet support (I2C)"
351 Say Y here if you want to use the I2C version of the Wacom
356 To compile this driver as a module, choose M here: the module
357 will be called wacom_i2c.
359 config TOUCHSCREEN_LPC32XX
360 tristate "LPC32XX touchscreen controller"
361 depends on ARCH_LPC32XX
363 Say Y here if you have a LPC32XX device and want
364 to support the built-in touchscreen.
366 To compile this driver as a module, choose M here: the
367 module will be called lpc32xx_ts.
369 config TOUCHSCREEN_MAX11801
370 tristate "MAX11801 based touchscreens"
373 Say Y here if you have a MAX11801 based touchscreen
378 To compile this driver as a module, choose M here: the
379 module will be called max11801_ts.
381 config TOUCHSCREEN_MCS5000
382 tristate "MELFAS MCS-5000 touchscreen"
385 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
390 To compile this driver as a module, choose M here: the
391 module will be called mcs5000_ts.
393 config TOUCHSCREEN_MMS114
394 tristate "MELFAS MMS114 touchscreen"
395 depends on I2C && GENERIC_HARDIRQS
397 Say Y here if you have the MELFAS MMS114 touchscreen controller
402 To compile this driver as a module, choose M here: the
403 module will be called mms114.
405 config TOUCHSCREEN_MTOUCH
406 tristate "MicroTouch serial touchscreens"
409 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
414 To compile this driver as a module, choose M here: the
415 module will be called mtouch.
417 config TOUCHSCREEN_INEXIO
418 tristate "iNexio serial touchscreens"
421 Say Y here if you have an iNexio serial touchscreen connected to
426 To compile this driver as a module, choose M here: the
427 module will be called inexio.
429 config TOUCHSCREEN_INTEL_MID
430 tristate "Intel MID platform resistive touchscreen"
431 depends on INTEL_SCU_IPC
433 Say Y here if you have a Intel MID based touchscreen in
438 To compile this driver as a module, choose M here: the
439 module will be called intel_mid_touch.
441 config TOUCHSCREEN_MK712
442 tristate "ICS MicroClock MK712 touchscreen"
444 Say Y here if you have the ICS MicroClock MK712 touchscreen
445 controller chip in your system.
449 To compile this driver as a module, choose M here: the
450 module will be called mk712.
452 config TOUCHSCREEN_HP600
453 tristate "HP Jornada 6xx touchscreen"
454 depends on SH_HP6XX && SH_ADC
456 Say Y here if you have a HP Jornada 620/660/680/690 and want to
457 support the built-in touchscreen.
459 To compile this driver as a module, choose M here: the
460 module will be called hp680_ts_input.
462 config TOUCHSCREEN_HP7XX
463 tristate "HP Jornada 7xx touchscreen"
464 depends on SA1100_JORNADA720_SSP
466 Say Y here if you have a HP Jornada 710/720/728 and want
467 to support the built-in touchscreen.
469 To compile this driver as a module, choose M here: the
470 module will be called jornada720_ts.
472 config TOUCHSCREEN_HTCPEN
473 tristate "HTC Shift X9500 touchscreen"
476 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
477 Clio / Shangrila and want to support the built-in touchscreen.
481 To compile this driver as a module, choose M here: the
482 module will be called htcpen.
484 config TOUCHSCREEN_PENMOUNT
485 tristate "Penmount serial touchscreen"
488 Say Y here if you have a Penmount serial touchscreen connected to
493 To compile this driver as a module, choose M here: the
494 module will be called penmount.
496 config TOUCHSCREEN_EDT_FT5X06
497 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
500 Say Y here if you have an EDT "Polytouch" touchscreen based
501 on the FocalTech FT5x06 family of controllers connected to
506 To compile this driver as a module, choose M here: the
507 module will be called edt-ft5x06.
509 config TOUCHSCREEN_MIGOR
510 tristate "Renesas MIGO-R touchscreen"
511 depends on SH_MIGOR && I2C
513 Say Y here to enable MIGO-R touchscreen support.
517 To compile this driver as a module, choose M here: the
518 module will be called migor_ts.
520 config TOUCHSCREEN_TNETV107X
521 tristate "TI TNETV107X touchscreen support"
522 depends on ARCH_DAVINCI_TNETV107X
524 Say Y here if you want to use the TNETV107X touchscreen.
526 To compile this driver as a module, choose M here: the
527 module will be called tnetv107x-ts.
529 config TOUCHSCREEN_TOUCHRIGHT
530 tristate "Touchright serial touchscreen"
533 Say Y here if you have a Touchright serial touchscreen connected to
538 To compile this driver as a module, choose M here: the
539 module will be called touchright.
541 config TOUCHSCREEN_TOUCHWIN
542 tristate "Touchwin serial touchscreen"
545 Say Y here if you have a Touchwin serial touchscreen connected to
550 To compile this driver as a module, choose M here: the
551 module will be called touchwin.
553 config TOUCHSCREEN_TI_AM335X_TSC
554 tristate "TI Touchscreen Interface"
555 depends on MFD_TI_AM335X_TSCADC
557 Say Y here if you have 4/5/8 wire touchscreen controller
558 to be connected to the ADC controller on your TI AM335x SoC.
562 To compile this driver as a module, choose M here: the
563 module will be called ti_am335x_tsc.
565 config TOUCHSCREEN_ATMEL_TSADCC
566 tristate "Atmel Touchscreen Interface"
569 Say Y here if you have a 4-wire touchscreen connected to the
570 ADC Controller on your Atmel SoC.
574 To compile this driver as a module, choose M here: the
575 module will be called atmel_tsadcc.
577 config TOUCHSCREEN_UCB1400
578 tristate "Philips UCB1400 touchscreen"
580 depends on UCB1400_CORE
582 This enables support for the Philips UCB1400 touchscreen interface.
583 The UCB1400 is an AC97 audio codec. The touchscreen interface
584 will be initialized only after the ALSA subsystem has been
585 brought up and the UCB1400 detected. You therefore have to
586 configure ALSA support as well (either built-in or modular,
587 independently of whether this driver is itself built-in or
588 modular) for this driver to work.
590 To compile this driver as a module, choose M here: the
591 module will be called ucb1400_ts.
593 config TOUCHSCREEN_PIXCIR
594 tristate "PIXCIR I2C touchscreens"
597 Say Y here if you have a pixcir i2c touchscreen
602 To compile this driver as a module, choose M here: the
603 module will be called pixcir_i2c_ts.
605 config TOUCHSCREEN_WM831X
606 tristate "Support for WM831x touchscreen controllers"
607 depends on MFD_WM831X
609 This enables support for the touchscreen controller on the WM831x
612 To compile this driver as a module, choose M here: the
613 module will be called wm831x-ts.
615 config TOUCHSCREEN_WM97XX
616 tristate "Support for WM97xx AC97 touchscreen controllers"
619 Say Y here if you have a Wolfson Microelectronics WM97xx
620 touchscreen connected to your system. Note that this option
621 only enables core driver, you will also need to select
622 support for appropriate chip below.
626 To compile this driver as a module, choose M here: the
627 module will be called wm97xx-ts.
629 config TOUCHSCREEN_WM9705
630 bool "WM9705 Touchscreen interface support"
631 depends on TOUCHSCREEN_WM97XX
634 Say Y here to enable support for the Wolfson Microelectronics
635 WM9705 touchscreen controller.
637 config TOUCHSCREEN_WM9712
638 bool "WM9712 Touchscreen interface support"
639 depends on TOUCHSCREEN_WM97XX
642 Say Y here to enable support for the Wolfson Microelectronics
643 WM9712 touchscreen controller.
645 config TOUCHSCREEN_WM9713
646 bool "WM9713 Touchscreen interface support"
647 depends on TOUCHSCREEN_WM97XX
650 Say Y here to enable support for the Wolfson Microelectronics
651 WM9713 touchscreen controller.
653 config TOUCHSCREEN_WM97XX_ATMEL
654 tristate "WM97xx Atmel accelerated touch"
655 depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
657 Say Y here for support for streaming mode with WM97xx touchscreens
658 on Atmel AT91 or AVR32 systems with an AC97C module.
660 Be aware that this will use channel B in the controller for
661 streaming data, this must not conflict with other AC97C drivers.
665 To compile this driver as a module, choose M here: the module will
666 be called atmel-wm97xx.
668 config TOUCHSCREEN_WM97XX_MAINSTONE
669 tristate "WM97xx Mainstone/Palm accelerated touch"
670 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
672 Say Y here for support for streaming mode with WM97xx touchscreens
673 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
677 To compile this driver as a module, choose M here: the
678 module will be called mainstone-wm97xx.
680 config TOUCHSCREEN_WM97XX_ZYLONITE
681 tristate "Zylonite accelerated touch"
682 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
683 select TOUCHSCREEN_WM9713
685 Say Y here for support for streaming mode with the touchscreen
690 To compile this driver as a module, choose M here: the
691 module will be called zylonite-wm97xx.
693 config TOUCHSCREEN_USB_COMPOSITE
694 tristate "USB Touchscreen Driver"
695 depends on USB_ARCH_HAS_HCD
698 USB Touchscreen driver for:
699 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
700 - PanJit TouchSet USB
701 - 3M MicroTouch USB (EX II series)
703 - some other eTurboTouch
706 - IRTOUCHSYSTEMS/UNITOP
708 - GoTop Super_Q2/GogoPen/PenPower tablets
709 - JASTEC USB Touch Controller/DigiTech DTR-02U
710 - Zytronic controllers
711 - Elo TouchSystems 2700 IntelliTouch
712 - EasyTouch USB Touch Controller from Data Modul
713 - e2i (Mimo monitors)
715 Have a look at <http://linux.chapter7.ch/touchkit/> for
716 a usage description and the required user-space stuff.
718 To compile this driver as a module, choose M here: the
719 module will be called usbtouchscreen.
721 config TOUCHSCREEN_MC13783
722 tristate "Freescale MC13783 touchscreen input driver"
723 depends on MFD_MC13783
725 Say Y here if you have an Freescale MC13783 PMIC on your
726 board and want to use its touchscreen
730 To compile this driver as a module, choose M here: the
731 module will be called mc13783_ts.
733 config TOUCHSCREEN_USB_EGALAX
735 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
736 depends on TOUCHSCREEN_USB_COMPOSITE
738 config TOUCHSCREEN_USB_PANJIT
740 bool "PanJit device support" if EXPERT
741 depends on TOUCHSCREEN_USB_COMPOSITE
743 config TOUCHSCREEN_USB_3M
745 bool "3M/Microtouch EX II series device support" if EXPERT
746 depends on TOUCHSCREEN_USB_COMPOSITE
748 config TOUCHSCREEN_USB_ITM
750 bool "ITM device support" if EXPERT
751 depends on TOUCHSCREEN_USB_COMPOSITE
753 config TOUCHSCREEN_USB_ETURBO
755 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
756 depends on TOUCHSCREEN_USB_COMPOSITE
758 config TOUCHSCREEN_USB_GUNZE
760 bool "Gunze AHL61 device support" if EXPERT
761 depends on TOUCHSCREEN_USB_COMPOSITE
763 config TOUCHSCREEN_USB_DMC_TSC10
765 bool "DMC TSC-10/25 device support" if EXPERT
766 depends on TOUCHSCREEN_USB_COMPOSITE
768 config TOUCHSCREEN_USB_IRTOUCH
770 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
771 depends on TOUCHSCREEN_USB_COMPOSITE
773 config TOUCHSCREEN_USB_IDEALTEK
775 bool "IdealTEK URTC1000 device support" if EXPERT
776 depends on TOUCHSCREEN_USB_COMPOSITE
778 config TOUCHSCREEN_USB_GENERAL_TOUCH
780 bool "GeneralTouch Touchscreen device support" if EXPERT
781 depends on TOUCHSCREEN_USB_COMPOSITE
783 config TOUCHSCREEN_USB_GOTOP
785 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
786 depends on TOUCHSCREEN_USB_COMPOSITE
788 config TOUCHSCREEN_USB_JASTEC
790 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
791 depends on TOUCHSCREEN_USB_COMPOSITE
793 config TOUCHSCREEN_USB_ELO
795 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
796 depends on TOUCHSCREEN_USB_COMPOSITE
798 config TOUCHSCREEN_USB_E2I
800 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
801 depends on TOUCHSCREEN_USB_COMPOSITE
803 config TOUCHSCREEN_USB_ZYTRONIC
805 bool "Zytronic controller" if EXPERT
806 depends on TOUCHSCREEN_USB_COMPOSITE
808 config TOUCHSCREEN_USB_ETT_TC45USB
810 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
811 depends on TOUCHSCREEN_USB_COMPOSITE
813 config TOUCHSCREEN_USB_NEXIO
815 bool "NEXIO/iNexio device support" if EXPERT
816 depends on TOUCHSCREEN_USB_COMPOSITE
818 config TOUCHSCREEN_USB_EASYTOUCH
820 bool "EasyTouch USB Touch controller device support" if EMBEDDED
821 depends on TOUCHSCREEN_USB_COMPOSITE
823 Say Y here if you have an EasyTouch USB Touch controller.
826 config TOUCHSCREEN_TOUCHIT213
827 tristate "Sahara TouchIT-213 touchscreen"
830 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
834 To compile this driver as a module, choose M here: the
835 module will be called touchit213.
837 config TOUCHSCREEN_TSC_SERIO
838 tristate "TSC-10/25/40 serial touchscreen support"
841 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
846 To compile this driver as a module, choose M here: the
847 module will be called tsc40.
849 config TOUCHSCREEN_TSC2005
850 tristate "TSC2005 based touchscreens"
851 depends on SPI_MASTER && GENERIC_HARDIRQS
853 Say Y here if you have a TSC2005 based touchscreen.
857 To compile this driver as a module, choose M here: the
858 module will be called tsc2005.
860 config TOUCHSCREEN_TSC2007
861 tristate "TSC2007 based touchscreens"
864 Say Y here if you have a TSC2007 based touchscreen.
868 To compile this driver as a module, choose M here: the
869 module will be called tsc2007.
871 config TOUCHSCREEN_W90X900
872 tristate "W90P910 touchscreen driver"
875 Say Y here if you have a W90P910 based touchscreen.
877 To compile this driver as a module, choose M here: the
878 module will be called w90p910_ts.
880 config TOUCHSCREEN_PCAP
881 tristate "Motorola PCAP touchscreen"
884 Say Y here if you have a Motorola EZX telephone and
885 want to enable support for the built-in touchscreen.
887 To compile this driver as a module, choose M here: the
888 module will be called pcap_ts.
890 config TOUCHSCREEN_ST1232
891 tristate "Sitronix ST1232 touchscreen controllers"
894 Say Y here if you want to support Sitronix ST1232
895 touchscreen controller.
899 To compile this driver as a module, choose M here: the
900 module will be called st1232_ts.
902 config TOUCHSCREEN_STMPE
903 tristate "STMicroelectronics STMPE touchscreens"
906 Say Y here if you want support for STMicroelectronics
907 STMPE touchscreen controllers.
909 To compile this driver as a module, choose M here: the
910 module will be called stmpe-ts.
912 config TOUCHSCREEN_TPS6507X
913 tristate "TPS6507x based touchscreens"
916 Say Y here if you have a TPS6507x based touchscreen
921 To compile this driver as a module, choose M here: the
922 module will be called tps6507x_ts.