2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_PROPERTIES
18 config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
30 config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
33 depends on HWMON = n || HWMON
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
44 If unsure, say N (but it's safe to say "Y").
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
49 config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
57 If unsure, say N (but it's safe to say "Y").
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
62 config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
68 You should select a bus connection too.
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
73 config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
79 To compile this driver as a module, choose M here: the
80 module will be called ad7879-i2c.
82 config TOUCHSCREEN_AD7879_SPI
83 tristate "support SPI bus connection"
84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
88 If unsure, say N (but it's safe to say "Y").
90 To compile this driver as a module, choose M here: the
91 module will be called ad7879-spi.
93 config TOUCHSCREEN_AR1021_I2C
94 tristate "Microchip AR1021 i2c touchscreen"
97 Say Y here if you have the Microchip AR1021 touchscreen controller
102 To compile this driver as a module, choose M here: the
103 module will be called ar1021_i2c.
105 config TOUCHSCREEN_ATMEL_MXT
106 tristate "Atmel mXT I2C Touchscreen"
110 Say Y here if you have Atmel mXT series I2C touchscreen,
111 such as AT42QT602240/ATMXT224, connected to your system.
115 To compile this driver as a module, choose M here: the
116 module will be called atmel_mxt_ts.
118 config TOUCHSCREEN_AUO_PIXCIR
119 tristate "AUO in-cell touchscreen using Pixcir ICs"
121 depends on GPIOLIB || COMPILE_TEST
123 Say Y here if you have a AUO display with in-cell touchscreen
128 To compile this driver as a module, choose M here: the
129 module will be called auo-pixcir-ts.
131 config TOUCHSCREEN_BU21013
132 tristate "BU21013 based touch panel controllers"
135 Say Y here if you have a bu21013 touchscreen connected to
140 To compile this driver as a module, choose M here: the
141 module will be called bu21013_ts.
143 config TOUCHSCREEN_CHIPONE_ICN8318
144 tristate "chipone icn8318 touchscreen controller"
145 depends on GPIOLIB || COMPILE_TEST
149 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
153 To compile this driver as a module, choose M here: the
154 module will be called chipone_icn8318.
156 config TOUCHSCREEN_CY8CTMG110
157 tristate "cy8ctmg110 touchscreen"
159 depends on GPIOLIB || COMPILE_TEST
161 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
166 To compile this driver as a module, choose M here: the
167 module will be called cy8ctmg110_ts.
169 config TOUCHSCREEN_CYTTSP_CORE
170 tristate "Cypress TTSP touchscreen"
172 Say Y here if you have a touchscreen using controller from
173 the Cypress TrueTouch(tm) Standard Product family connected
174 to your system. You will also need to select appropriate
175 bus connection below.
179 To compile this driver as a module, choose M here: the
180 module will be called cyttsp_core.
182 config TOUCHSCREEN_CYTTSP_I2C
183 tristate "support I2C bus connection"
184 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
186 Say Y here if the touchscreen is connected via I2C bus.
188 To compile this driver as a module, choose M here: the
189 module will be called cyttsp_i2c.
191 config TOUCHSCREEN_CYTTSP_SPI
192 tristate "support SPI bus connection"
193 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
195 Say Y here if the touchscreen is connected via SPI bus.
197 To compile this driver as a module, choose M here: the
198 module will be called cyttsp_spi.
200 config TOUCHSCREEN_CYTTSP4_CORE
201 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
203 Core driver for Cypress TrueTouch(tm) Standard Product
204 Generation4 touchscreen controllers.
206 Say Y here if you have a Cypress Gen4 touchscreen.
210 To compile this driver as a module, choose M here.
212 config TOUCHSCREEN_CYTTSP4_I2C
213 tristate "support I2C bus connection"
214 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
216 Say Y here if the touchscreen is connected via I2C bus.
218 To compile this driver as a module, choose M here: the
219 module will be called cyttsp4_i2c.
221 config TOUCHSCREEN_CYTTSP4_SPI
222 tristate "support SPI bus connection"
223 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
225 Say Y here if the touchscreen is connected via SPI bus.
227 To compile this driver as a module, choose M here: the
228 module will be called cyttsp4_spi.
230 config TOUCHSCREEN_DA9034
231 tristate "Touchscreen support for Dialog Semiconductor DA9034"
232 depends on PMIC_DA903X
235 Say Y here to enable the support for the touchscreen found
236 on Dialog Semiconductor DA9034 PMIC.
240 To compile this driver as a module, choose M here: the
241 module will be called da9034-ts.
243 config TOUCHSCREEN_DA9052
244 tristate "Dialog DA9052/DA9053 TSI"
245 depends on PMIC_DA9052
247 Say Y here to support the touchscreen found on Dialog Semiconductor
248 DA9052-BC and DA9053-AA/Bx PMICs.
252 To compile this driver as a module, choose M here: the
253 module will be called da9052_tsi.
255 config TOUCHSCREEN_DYNAPRO
256 tristate "Dynapro serial touchscreen"
259 Say Y here if you have a Dynapro serial touchscreen connected to
264 To compile this driver as a module, choose M here: the
265 module will be called dynapro.
267 config TOUCHSCREEN_HAMPSHIRE
268 tristate "Hampshire serial touchscreen"
271 Say Y here if you have a Hampshire serial touchscreen connected to
276 To compile this driver as a module, choose M here: the
277 module will be called hampshire.
279 config TOUCHSCREEN_EETI
280 tristate "EETI touchscreen panel support"
283 Say Y here to enable support for I2C connected EETI touch panels.
285 To compile this driver as a module, choose M here: the
286 module will be called eeti_ts.
288 config TOUCHSCREEN_EGALAX
289 tristate "EETI eGalax multi-touch panel support"
292 Say Y here to enable support for I2C connected EETI
293 eGalax multi-touch panels.
295 To compile this driver as a module, choose M here: the
296 module will be called egalax_ts.
298 config TOUCHSCREEN_FT6236
299 tristate "FT6236 I2C touchscreen"
301 depends on GPIOLIB || COMPILE_TEST
303 Say Y here to enable support for the I2C connected FT6x06 and
304 FT6x36 family of capacitive touchscreen drivers.
308 To compile this driver as a module, choose M here: the
309 module will be called ft6236.
311 config TOUCHSCREEN_FUJITSU
312 tristate "Fujitsu serial touchscreen"
315 Say Y here if you have the Fujitsu touchscreen (such as one
316 installed in Lifebook P series laptop) connected to your
321 To compile this driver as a module, choose M here: the
322 module will be called fujitsu-ts.
324 config TOUCHSCREEN_GOODIX
325 tristate "Goodix I2C touchscreen"
328 Say Y here if you have the Goodix touchscreen (such as one
329 installed in Onda v975w tablets) connected to your
330 system. It also supports 5-finger chip models, which can be
331 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
335 To compile this driver as a module, choose M here: the
336 module will be called goodix.
338 config TOUCHSCREEN_GSLX680_VR
339 tristate "gslX680 touchpad driver for VR"
341 gslX680 touchpad driver for VR
343 config TOUCHSCREEN_GT9XX
344 tristate "Goodix gt9xx support for rockchip platform"
345 depends on I2C && ARCH_ROCKCHIP
347 Say Y here if you have a touchscreen interface using the gt9xx
348 on Rockchip platform, and your board-specific initialization
349 code includes that in its table of IIC devices.
352 config TOUCHSCREEN_ILI210X
353 tristate "Ilitek ILI210X based touchscreen"
356 Say Y here if you have a ILI210X based touchscreen
357 controller. This driver supports models ILI2102,
358 ILI2102s, ILI2103, ILI2103s and ILI2105.
359 Such kind of chipsets can be found in Amazon Kindle Fire
364 To compile this driver as a module, choose M here: the
365 module will be called ili210x.
367 config TOUCHSCREEN_IPROC
368 tristate "IPROC touch panel driver support"
369 depends on ARCH_BCM_IPROC || COMPILE_TEST
371 Say Y here if you want to add support for the IPROC touch
372 controller to your system.
376 To compile this driver as a module, choose M here: the
377 module will be called bcm_iproc_tsc.
379 config TOUCHSCREEN_S3C2410
380 tristate "Samsung S3C2410/generic touchscreen input driver"
381 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
384 Say Y here if you have the s3c2410 touchscreen.
388 To compile this driver as a module, choose M here: the
389 module will be called s3c2410_ts.
391 config TOUCHSCREEN_GUNZE
392 tristate "Gunze AHL-51S touchscreen"
395 Say Y here if you have the Gunze AHL-51 touchscreen connected to
400 To compile this driver as a module, choose M here: the
401 module will be called gunze.
403 config TOUCHSCREEN_ELAN
404 tristate "Elan eKTH I2C touchscreen"
407 Say Y here if you have an Elan eKTH I2C touchscreen
408 connected to your system.
412 To compile this driver as a module, choose M here: the
413 module will be called elants_i2c.
415 config TOUCHSCREEN_ELO
416 tristate "Elo serial touchscreens"
419 Say Y here if you have an Elo serial touchscreen connected to
424 To compile this driver as a module, choose M here: the
425 module will be called elo.
427 config TOUCHSCREEN_WACOM_W8001
428 tristate "Wacom W8001 penabled serial touchscreen"
431 Say Y here if you have an Wacom W8001 penabled serial touchscreen
432 connected to your system.
436 To compile this driver as a module, choose M here: the
437 module will be called wacom_w8001.
439 config TOUCHSCREEN_WACOM_I2C
440 tristate "Wacom Tablet support (I2C)"
443 Say Y here if you want to use the I2C version of the Wacom
448 To compile this driver as a module, choose M here: the module
449 will be called wacom_i2c.
451 config TOUCHSCREEN_LPC32XX
452 tristate "LPC32XX touchscreen controller"
453 depends on ARCH_LPC32XX
455 Say Y here if you have a LPC32XX device and want
456 to support the built-in touchscreen.
458 To compile this driver as a module, choose M here: the
459 module will be called lpc32xx_ts.
461 config TOUCHSCREEN_MAX11801
462 tristate "MAX11801 based touchscreens"
465 Say Y here if you have a MAX11801 based touchscreen
470 To compile this driver as a module, choose M here: the
471 module will be called max11801_ts.
473 config TOUCHSCREEN_MCS5000
474 tristate "MELFAS MCS-5000 touchscreen"
477 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
482 To compile this driver as a module, choose M here: the
483 module will be called mcs5000_ts.
485 config TOUCHSCREEN_MMS114
486 tristate "MELFAS MMS114 touchscreen"
489 Say Y here if you have the MELFAS MMS114 touchscreen controller
494 To compile this driver as a module, choose M here: the
495 module will be called mms114.
497 config TOUCHSCREEN_MTOUCH
498 tristate "MicroTouch serial touchscreens"
501 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
506 To compile this driver as a module, choose M here: the
507 module will be called mtouch.
509 config TOUCHSCREEN_IMX6UL_TSC
510 tristate "Freescale i.MX6UL touchscreen controller"
511 depends on (OF && GPIOLIB) || COMPILE_TEST
513 Say Y here if you have a Freescale i.MX6UL, and want to
514 use the internal touchscreen controller.
518 To compile this driver as a module, choose M here: the
519 module will be called imx6ul_tsc.
521 config TOUCHSCREEN_INEXIO
522 tristate "iNexio serial touchscreens"
525 Say Y here if you have an iNexio serial touchscreen connected to
530 To compile this driver as a module, choose M here: the
531 module will be called inexio.
533 config TOUCHSCREEN_INTEL_MID
534 tristate "Intel MID platform resistive touchscreen"
535 depends on INTEL_SCU_IPC
537 Say Y here if you have a Intel MID based touchscreen in
542 To compile this driver as a module, choose M here: the
543 module will be called intel_mid_touch.
545 config TOUCHSCREEN_MK712
546 tristate "ICS MicroClock MK712 touchscreen"
548 Say Y here if you have the ICS MicroClock MK712 touchscreen
549 controller chip in your system.
553 To compile this driver as a module, choose M here: the
554 module will be called mk712.
556 config TOUCHSCREEN_HP600
557 tristate "HP Jornada 6xx touchscreen"
558 depends on SH_HP6XX && SH_ADC
560 Say Y here if you have a HP Jornada 620/660/680/690 and want to
561 support the built-in touchscreen.
563 To compile this driver as a module, choose M here: the
564 module will be called hp680_ts_input.
566 config TOUCHSCREEN_HP7XX
567 tristate "HP Jornada 7xx touchscreen"
568 depends on SA1100_JORNADA720_SSP
570 Say Y here if you have a HP Jornada 710/720/728 and want
571 to support the built-in touchscreen.
573 To compile this driver as a module, choose M here: the
574 module will be called jornada720_ts.
576 config TOUCHSCREEN_IPAQ_MICRO
577 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
578 depends on MFD_IPAQ_MICRO
580 Say Y here to enable support for the touchscreen attached to
581 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
585 To compile this driver as a module, choose M here: the
586 module will be called ipaq-micro-ts.
588 config TOUCHSCREEN_HTCPEN
589 tristate "HTC Shift X9500 touchscreen"
592 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
593 Clio / Shangrila and want to support the built-in touchscreen.
597 To compile this driver as a module, choose M here: the
598 module will be called htcpen.
600 config TOUCHSCREEN_PENMOUNT
601 tristate "Penmount serial touchscreen"
604 Say Y here if you have a Penmount serial touchscreen connected to
609 To compile this driver as a module, choose M here: the
610 module will be called penmount.
612 config TOUCHSCREEN_EDT_FT5X06
613 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
616 Say Y here if you have an EDT "Polytouch" touchscreen based
617 on the FocalTech FT5x06 family of controllers connected to
622 To compile this driver as a module, choose M here: the
623 module will be called edt-ft5x06.
625 config TOUCHSCREEN_MIGOR
626 tristate "Renesas MIGO-R touchscreen"
627 depends on SH_MIGOR && I2C
629 Say Y here to enable MIGO-R touchscreen support.
633 To compile this driver as a module, choose M here: the
634 module will be called migor_ts.
636 config TOUCHSCREEN_TOUCHRIGHT
637 tristate "Touchright serial touchscreen"
640 Say Y here if you have a Touchright serial touchscreen connected to
645 To compile this driver as a module, choose M here: the
646 module will be called touchright.
648 config TOUCHSCREEN_TOUCHWIN
649 tristate "Touchwin serial touchscreen"
652 Say Y here if you have a Touchwin serial touchscreen connected to
657 To compile this driver as a module, choose M here: the
658 module will be called touchwin.
660 config TOUCHSCREEN_TI_AM335X_TSC
661 tristate "TI Touchscreen Interface"
662 depends on MFD_TI_AM335X_TSCADC
664 Say Y here if you have 4/5/8 wire touchscreen controller
665 to be connected to the ADC controller on your TI AM335x SoC.
669 To compile this driver as a module, choose M here: the
670 module will be called ti_am335x_tsc.
672 config TOUCHSCREEN_UCB1400
673 tristate "Philips UCB1400 touchscreen"
675 depends on UCB1400_CORE
677 This enables support for the Philips UCB1400 touchscreen interface.
678 The UCB1400 is an AC97 audio codec. The touchscreen interface
679 will be initialized only after the ALSA subsystem has been
680 brought up and the UCB1400 detected. You therefore have to
681 configure ALSA support as well (either built-in or modular,
682 independently of whether this driver is itself built-in or
683 modular) for this driver to work.
685 To compile this driver as a module, choose M here: the
686 module will be called ucb1400_ts.
688 config TOUCHSCREEN_PIXCIR
689 tristate "PIXCIR I2C touchscreens"
692 Say Y here if you have a pixcir i2c touchscreen
697 To compile this driver as a module, choose M here: the
698 module will be called pixcir_i2c_ts.
700 config TOUCHSCREEN_WDT87XX_I2C
701 tristate "Weida HiTech I2C touchscreen"
704 Say Y here if you have a Weida WDT87XX I2C touchscreen
705 connected to your system.
709 To compile this driver as a module, choose M here: the
710 module will be called wdt87xx_i2c.
712 config TOUCHSCREEN_WM831X
713 tristate "Support for WM831x touchscreen controllers"
714 depends on MFD_WM831X
716 This enables support for the touchscreen controller on the WM831x
719 To compile this driver as a module, choose M here: the
720 module will be called wm831x-ts.
722 config TOUCHSCREEN_WM97XX
723 tristate "Support for WM97xx AC97 touchscreen controllers"
726 Say Y here if you have a Wolfson Microelectronics WM97xx
727 touchscreen connected to your system. Note that this option
728 only enables core driver, you will also need to select
729 support for appropriate chip below.
733 To compile this driver as a module, choose M here: the
734 module will be called wm97xx-ts.
736 config TOUCHSCREEN_WM9705
737 bool "WM9705 Touchscreen interface support"
738 depends on TOUCHSCREEN_WM97XX
741 Say Y here to enable support for the Wolfson Microelectronics
742 WM9705 touchscreen controller.
744 config TOUCHSCREEN_WM9712
745 bool "WM9712 Touchscreen interface support"
746 depends on TOUCHSCREEN_WM97XX
749 Say Y here to enable support for the Wolfson Microelectronics
750 WM9712 touchscreen controller.
752 config TOUCHSCREEN_WM9713
753 bool "WM9713 Touchscreen interface support"
754 depends on TOUCHSCREEN_WM97XX
757 Say Y here to enable support for the Wolfson Microelectronics
758 WM9713 touchscreen controller.
760 config TOUCHSCREEN_WM97XX_ATMEL
761 tristate "WM97xx Atmel accelerated touch"
762 depends on TOUCHSCREEN_WM97XX && AVR32
764 Say Y here for support for streaming mode with WM97xx touchscreens
765 on Atmel AT91 or AVR32 systems with an AC97C module.
767 Be aware that this will use channel B in the controller for
768 streaming data, this must not conflict with other AC97C drivers.
772 To compile this driver as a module, choose M here: the module will
773 be called atmel-wm97xx.
775 config TOUCHSCREEN_WM97XX_MAINSTONE
776 tristate "WM97xx Mainstone/Palm accelerated touch"
777 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
779 Say Y here for support for streaming mode with WM97xx touchscreens
780 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
784 To compile this driver as a module, choose M here: the
785 module will be called mainstone-wm97xx.
787 config TOUCHSCREEN_WM97XX_ZYLONITE
788 tristate "Zylonite accelerated touch"
789 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
790 select TOUCHSCREEN_WM9713
792 Say Y here for support for streaming mode with the touchscreen
797 To compile this driver as a module, choose M here: the
798 module will be called zylonite-wm97xx.
800 config TOUCHSCREEN_USB_COMPOSITE
801 tristate "USB Touchscreen Driver"
802 depends on USB_ARCH_HAS_HCD
805 USB Touchscreen driver for:
806 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
807 - PanJit TouchSet USB
808 - 3M MicroTouch USB (EX II series)
810 - some other eTurboTouch
813 - IRTOUCHSYSTEMS/UNITOP
815 - GoTop Super_Q2/GogoPen/PenPower tablets
816 - JASTEC USB Touch Controller/DigiTech DTR-02U
817 - Zytronic controllers
818 - Elo TouchSystems 2700 IntelliTouch
819 - EasyTouch USB Touch Controller from Data Modul
820 - e2i (Mimo monitors)
822 Have a look at <http://linux.chapter7.ch/touchkit/> for
823 a usage description and the required user-space stuff.
825 To compile this driver as a module, choose M here: the
826 module will be called usbtouchscreen.
828 config TOUCHSCREEN_MC13783
829 tristate "Freescale MC13783 touchscreen input driver"
830 depends on MFD_MC13XXX
832 Say Y here if you have an Freescale MC13783 PMIC on your
833 board and want to use its touchscreen
837 To compile this driver as a module, choose M here: the
838 module will be called mc13783_ts.
840 config TOUCHSCREEN_USB_EGALAX
842 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
843 depends on TOUCHSCREEN_USB_COMPOSITE
845 config TOUCHSCREEN_USB_PANJIT
847 bool "PanJit device support" if EXPERT
848 depends on TOUCHSCREEN_USB_COMPOSITE
850 config TOUCHSCREEN_USB_3M
852 bool "3M/Microtouch EX II series device support" if EXPERT
853 depends on TOUCHSCREEN_USB_COMPOSITE
855 config TOUCHSCREEN_USB_ITM
857 bool "ITM device support" if EXPERT
858 depends on TOUCHSCREEN_USB_COMPOSITE
860 config TOUCHSCREEN_USB_ETURBO
862 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
863 depends on TOUCHSCREEN_USB_COMPOSITE
865 config TOUCHSCREEN_USB_GUNZE
867 bool "Gunze AHL61 device support" if EXPERT
868 depends on TOUCHSCREEN_USB_COMPOSITE
870 config TOUCHSCREEN_USB_DMC_TSC10
872 bool "DMC TSC-10/25 device support" if EXPERT
873 depends on TOUCHSCREEN_USB_COMPOSITE
875 config TOUCHSCREEN_USB_IRTOUCH
877 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
878 depends on TOUCHSCREEN_USB_COMPOSITE
880 config TOUCHSCREEN_USB_IDEALTEK
882 bool "IdealTEK URTC1000 device support" if EXPERT
883 depends on TOUCHSCREEN_USB_COMPOSITE
885 config TOUCHSCREEN_USB_GENERAL_TOUCH
887 bool "GeneralTouch Touchscreen device support" if EXPERT
888 depends on TOUCHSCREEN_USB_COMPOSITE
890 config TOUCHSCREEN_USB_GOTOP
892 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
893 depends on TOUCHSCREEN_USB_COMPOSITE
895 config TOUCHSCREEN_USB_JASTEC
897 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
898 depends on TOUCHSCREEN_USB_COMPOSITE
900 config TOUCHSCREEN_USB_ELO
902 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
903 depends on TOUCHSCREEN_USB_COMPOSITE
905 config TOUCHSCREEN_USB_E2I
907 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
908 depends on TOUCHSCREEN_USB_COMPOSITE
910 config TOUCHSCREEN_USB_ZYTRONIC
912 bool "Zytronic controller" if EXPERT
913 depends on TOUCHSCREEN_USB_COMPOSITE
915 config TOUCHSCREEN_USB_ETT_TC45USB
917 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
918 depends on TOUCHSCREEN_USB_COMPOSITE
920 config TOUCHSCREEN_USB_NEXIO
922 bool "NEXIO/iNexio device support" if EXPERT
923 depends on TOUCHSCREEN_USB_COMPOSITE
925 config TOUCHSCREEN_USB_EASYTOUCH
927 bool "EasyTouch USB Touch controller device support" if EMBEDDED
928 depends on TOUCHSCREEN_USB_COMPOSITE
930 Say Y here if you have an EasyTouch USB Touch controller.
933 config TOUCHSCREEN_TOUCHIT213
934 tristate "Sahara TouchIT-213 touchscreen"
937 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
941 To compile this driver as a module, choose M here: the
942 module will be called touchit213.
944 config TOUCHSCREEN_TSC_SERIO
945 tristate "TSC-10/25/40 serial touchscreen support"
948 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
953 To compile this driver as a module, choose M here: the
954 module will be called tsc40.
956 config TOUCHSCREEN_TSC200X_CORE
959 config TOUCHSCREEN_TSC2004
960 tristate "TSC2004 based touchscreens"
963 select TOUCHSCREEN_TSC200X_CORE
965 Say Y here if you have a TSC2004 based touchscreen.
969 To compile this driver as a module, choose M here: the
970 module will be called tsc2004.
972 config TOUCHSCREEN_TSC2005
973 tristate "TSC2005 based touchscreens"
974 depends on SPI_MASTER
976 select TOUCHSCREEN_TSC200X_CORE
978 Say Y here if you have a TSC2005 based touchscreen.
982 To compile this driver as a module, choose M here: the
983 module will be called tsc2005.
985 config TOUCHSCREEN_TSC2007
986 tristate "TSC2007 based touchscreens"
989 Say Y here if you have a TSC2007 based touchscreen.
993 To compile this driver as a module, choose M here: the
994 module will be called tsc2007.
996 config TOUCHSCREEN_W90X900
997 tristate "W90P910 touchscreen driver"
998 depends on ARCH_W90X900
1000 Say Y here if you have a W90P910 based touchscreen.
1002 To compile this driver as a module, choose M here: the
1003 module will be called w90p910_ts.
1005 config TOUCHSCREEN_PCAP
1006 tristate "Motorola PCAP touchscreen"
1009 Say Y here if you have a Motorola EZX telephone and
1010 want to enable support for the built-in touchscreen.
1012 To compile this driver as a module, choose M here: the
1013 module will be called pcap_ts.
1015 config TOUCHSCREEN_ST1232
1016 tristate "Sitronix ST1232 touchscreen controllers"
1019 Say Y here if you want to support Sitronix ST1232
1020 touchscreen controller.
1024 To compile this driver as a module, choose M here: the
1025 module will be called st1232_ts.
1027 config TOUCHSCREEN_STMPE
1028 tristate "STMicroelectronics STMPE touchscreens"
1029 depends on MFD_STMPE
1030 depends on (OF || COMPILE_TEST)
1032 Say Y here if you want support for STMicroelectronics
1033 STMPE touchscreen controllers.
1035 To compile this driver as a module, choose M here: the
1036 module will be called stmpe-ts.
1038 config TOUCHSCREEN_SUN4I
1039 tristate "Allwinner sun4i resistive touchscreen controller support"
1040 depends on ARCH_SUNXI || COMPILE_TEST
1042 depends on THERMAL || !THERMAL_OF
1044 This selects support for the resistive touchscreen controller
1045 found on Allwinner sunxi SoCs.
1047 To compile this driver as a module, choose M here: the
1048 module will be called sun4i-ts.
1050 config TOUCHSCREEN_SUR40
1051 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1052 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1053 depends on VIDEO_V4L2
1054 select INPUT_POLLDEV
1055 select VIDEOBUF2_DMA_SG
1057 Say Y here if you want support for the Samsung SUR40 touchscreen
1058 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1060 To compile this driver as a module, choose M here: the
1061 module will be called sur40.
1063 config TOUCHSCREEN_SX8654
1064 tristate "Semtech SX8654 touchscreen"
1067 Say Y here if you have a Semtech SX8654 touchscreen controller.
1071 To compile this driver as a module, choose M here: the
1072 module will be called sx8654.
1074 config TOUCHSCREEN_TPS6507X
1075 tristate "TPS6507x based touchscreens"
1077 select INPUT_POLLDEV
1079 Say Y here if you have a TPS6507x based touchscreen
1084 To compile this driver as a module, choose M here: the
1085 module will be called tps6507x_ts.
1087 config TOUCHSCREEN_ZFORCE
1088 tristate "Neonode zForce infrared touchscreens"
1090 depends on GPIOLIB || COMPILE_TEST
1092 Say Y here if you have a touchscreen using the zforce
1093 infraread technology from Neonode.
1097 To compile this driver as a module, choose M here: the
1098 module will be called zforce_ts.
1100 config TOUCHSCREEN_COLIBRI_VF50
1101 tristate "Toradex Colibri on board touchscreen driver"
1102 depends on GPIOLIB && IIO && VF610_ADC
1104 Say Y here if you have a Colibri VF50 and plan to use
1105 the on-board provided 4-wire touchscreen driver.
1109 To compile this driver as a module, choose M here: the
1110 module will be called colibri_vf50_ts.
1112 config TOUCHSCREEN_ROHM_BU21023
1113 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1116 Say Y here if you have a touchscreen using ROHM BU21023/24.
1120 To compile this driver as a module, choose M here: the
1121 module will be called bu21023_ts.