drivers/gpu/drm/i915/intel_dvo.c

   1 /*
   2  * Copyright 2006 Dave Airlie <airlied@linux.ie>
   3  * Copyright © 2006-2007 Intel Corporation
   4  *
   5  * Permission is hereby granted, free of charge, to any person obtaining a
   6  * copy of this software and associated documentation files (the "Software"),
   7  * to deal in the Software without restriction, including without limitation
   8  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   9  * and/or sell copies of the Software, and to permit persons to whom the
  10  * Software is furnished to do so, subject to the following conditions:
  11  *
  12  * The above copyright notice and this permission notice (including the next
  13  * paragraph) shall be included in all copies or substantial portions of the
  14  * Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  21  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  22  * DEALINGS IN THE SOFTWARE.
  23  *
  24  * Authors:
  25  *      Eric Anholt <eric@anholt.net>
  26  */
  27 #include <linux/i2c.h>
  28 #include <linux/slab.h>
  29 #include <drm/drmP.h>
  30 #include <drm/drm_crtc.h>
  31 #include "intel_drv.h"
  32 #include <drm/i915_drm.h>
  33 #include "i915_drv.h"
  34 #include "dvo.h"
  35
  36 #define SIL164_ADDR     0x38
  37 #define CH7xxx_ADDR     0x76
  38 #define TFP410_ADDR     0x38
  39 #define NS2501_ADDR     0x38
  40
  41 static const struct intel_dvo_device intel_dvo_devices[] = {
  42         {
  43                 .type = INTEL_DVO_CHIP_TMDS,
  44                 .name = "sil164",
  45                 .dvo_reg = DVOC,
  46                 .slave_addr = SIL164_ADDR,
  47                 .dev_ops = &sil164_ops,
  48         },
  49         {
  50                 .type = INTEL_DVO_CHIP_TMDS,
  51                 .name = "ch7xxx",
  52                 .dvo_reg = DVOC,
  53                 .slave_addr = CH7xxx_ADDR,
  54                 .dev_ops = &ch7xxx_ops,
  55         },
  56         {
  57                 .type = INTEL_DVO_CHIP_TMDS,
  58                 .name = "ch7xxx",
  59                 .dvo_reg = DVOC,
  60                 .slave_addr = 0x75, /* For some ch7010 */
  61                 .dev_ops = &ch7xxx_ops,
  62         },
  63         {
  64                 .type = INTEL_DVO_CHIP_LVDS,
  65                 .name = "ivch",
  66                 .dvo_reg = DVOA,
  67                 .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
  68                 .dev_ops = &ivch_ops,
  69         },
  70         {
  71                 .type = INTEL_DVO_CHIP_TMDS,
  72                 .name = "tfp410",
  73                 .dvo_reg = DVOC,
  74                 .slave_addr = TFP410_ADDR,
  75                 .dev_ops = &tfp410_ops,
  76         },
  77         {
  78                 .type = INTEL_DVO_CHIP_LVDS,
  79                 .name = "ch7017",
  80                 .dvo_reg = DVOC,
  81                 .slave_addr = 0x75,
  82                 .gpio = GMBUS_PORT_DPB,
  83                 .dev_ops = &ch7017_ops,
  84         },
  85         {
  86                 .type = INTEL_DVO_CHIP_TMDS,
  87                 .name = "ns2501",
  88                 .dvo_reg = DVOC,
  89                 .slave_addr = NS2501_ADDR,
  90                 .dev_ops = &ns2501_ops,
  91        }
  92 };
  93
  94 struct intel_dvo {
  95         struct intel_encoder base;
  96
  97         struct intel_dvo_device dev;
  98
  99         struct drm_display_mode *panel_fixed_mode;
 100         bool panel_wants_dither;
 101 };
 102
 103 static struct intel_dvo *enc_to_dvo(struct intel_encoder *encoder)
 104 {
 105         return container_of(encoder, struct intel_dvo, base);
 106 }
 107
 108 static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector)
 109 {
 110         return enc_to_dvo(intel_attached_encoder(connector));
 111 }
 112
 113 static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector)
 114 {
 115         struct intel_dvo *intel_dvo = intel_attached_dvo(&connector->base);
 116
 117         return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev);
 118 }
 119
 120 static bool intel_dvo_get_hw_state(struct intel_encoder *encoder,
 121                                    enum pipe *pipe)
 122 {
 123         struct drm_device *dev = encoder->base.dev;
 124         struct drm_i915_private *dev_priv = dev->dev_private;
 125         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 126         u32 tmp;
 127
 128         tmp = I915_READ(intel_dvo->dev.dvo_reg);
 129
 130         if (!(tmp & DVO_ENABLE))
 131                 return false;
 132
 133         *pipe = PORT_TO_PIPE(tmp);
 134
 135         return true;
 136 }
 137
 138 static void intel_dvo_get_config(struct intel_encoder *encoder,
 139                                  struct intel_crtc_config *pipe_config)
 140 {
 141         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 142         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 143         u32 tmp, flags = 0;
 144
 145         tmp = I915_READ(intel_dvo->dev.dvo_reg);
 146         if (tmp & DVO_HSYNC_ACTIVE_HIGH)
 147                 flags |= DRM_MODE_FLAG_PHSYNC;
 148         else
 149                 flags |= DRM_MODE_FLAG_NHSYNC;
 150         if (tmp & DVO_VSYNC_ACTIVE_HIGH)
 151                 flags |= DRM_MODE_FLAG_PVSYNC;
 152         else
 153                 flags |= DRM_MODE_FLAG_NVSYNC;
 154
 155         pipe_config->adjusted_mode.flags |= flags;
 156
 157         pipe_config->adjusted_mode.crtc_clock = pipe_config->port_clock;
 158 }
 159
 160 static void intel_disable_dvo(struct intel_encoder *encoder)
 161 {
 162         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 163         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 164         u32 dvo_reg = intel_dvo->dev.dvo_reg;
 165         u32 temp = I915_READ(dvo_reg);
 166
 167         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
 168         I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
 169         I915_READ(dvo_reg);
 170 }
 171
 172 static void intel_enable_dvo(struct intel_encoder *encoder)
 173 {
 174         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 175         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 176         struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 177         u32 dvo_reg = intel_dvo->dev.dvo_reg;
 178         u32 temp = I915_READ(dvo_reg);
 179
 180         I915_WRITE(dvo_reg, temp | DVO_ENABLE);
 181         I915_READ(dvo_reg);
 182         intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
 183                                          &crtc->config.requested_mode,
 184                                          &crtc->config.adjusted_mode);
 185
 186         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 187 }
 188
 189 /* Special dpms function to support cloning between dvo/sdvo/crt. */
 190 static void intel_dvo_dpms(struct drm_connector *connector, int mode)
 191 {
 192         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 193         struct drm_crtc *crtc;
 194         struct intel_crtc_config *config;
 195
 196         /* dvo supports only 2 dpms states. */
 197         if (mode != DRM_MODE_DPMS_ON)
 198                 mode = DRM_MODE_DPMS_OFF;
 199
 200         if (mode == connector->dpms)
 201                 return;
 202
 203         connector->dpms = mode;
 204
 205         /* Only need to change hw state when actually enabled */
 206         crtc = intel_dvo->base.base.crtc;
 207         if (!crtc) {
 208                 intel_dvo->base.connectors_active = false;
 209                 return;
 210         }
 211
 212         /* We call connector dpms manually below in case pipe dpms doesn't
 213          * change due to cloning. */
 214         if (mode == DRM_MODE_DPMS_ON) {
 215                 config = &to_intel_crtc(crtc)->config;
 216
 217                 intel_dvo->base.connectors_active = true;
 218
 219                 intel_crtc_update_dpms(crtc);
 220
 221                 intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
 222                                                  &config->requested_mode,
 223                                                  &config->adjusted_mode);
 224
 225                 intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 226         } else {
 227                 intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
 228
 229                 intel_dvo->base.connectors_active = false;
 230
 231                 intel_crtc_update_dpms(crtc);
 232         }
 233
 234         intel_modeset_check_state(connector->dev);
 235 }
 236
 237 static enum drm_mode_status
 238 intel_dvo_mode_valid(struct drm_connector *connector,
 239                      struct drm_display_mode *mode)
 240 {
 241         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 242
 243         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 244                 return MODE_NO_DBLESCAN;
 245
 246         /* XXX: Validate clock range */
 247
 248         if (intel_dvo->panel_fixed_mode) {
 249                 if (mode->hdisplay > intel_dvo->panel_fixed_mode->hdisplay)
 250                         return MODE_PANEL;
 251                 if (mode->vdisplay > intel_dvo->panel_fixed_mode->vdisplay)
 252                         return MODE_PANEL;
 253         }
 254
 255         return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode);
 256 }
 257
 258 static bool intel_dvo_compute_config(struct intel_encoder *encoder,
 259                                      struct intel_crtc_config *pipe_config)
 260 {
 261         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 262         struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
 263
 264         /* If we have timings from the BIOS for the panel, put them in
 265          * to the adjusted mode.  The CRTC will be set up for this mode,
 266          * with the panel scaling set up to source from the H/VDisplay
 267          * of the original mode.
 268          */
 269         if (intel_dvo->panel_fixed_mode != NULL) {
 270 #define C(x) adjusted_mode->x = intel_dvo->panel_fixed_mode->x
 271                 C(hdisplay);
 272                 C(hsync_start);
 273                 C(hsync_end);
 274                 C(htotal);
 275                 C(vdisplay);
 276                 C(vsync_start);
 277                 C(vsync_end);
 278                 C(vtotal);
 279                 C(clock);
 280 #undef C
 281
 282                 drm_mode_set_crtcinfo(adjusted_mode, 0);
 283         }
 284
 285         return true;
 286 }
 287
 288 static void intel_dvo_pre_enable(struct intel_encoder *encoder)
 289 {
 290         struct drm_device *dev = encoder->base.dev;
 291         struct drm_i915_private *dev_priv = dev->dev_private;
 292         struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 293         struct drm_display_mode *adjusted_mode = &crtc->config.adjusted_mode;
 294         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 295         int pipe = crtc->pipe;
 296         u32 dvo_val;
 297         u32 dvo_reg = intel_dvo->dev.dvo_reg, dvo_srcdim_reg;
 298
 299         switch (dvo_reg) {
 300         case DVOA:
 301         default:
 302                 dvo_srcdim_reg = DVOA_SRCDIM;
 303                 break;
 304         case DVOB:
 305                 dvo_srcdim_reg = DVOB_SRCDIM;
 306                 break;
 307         case DVOC:
 308                 dvo_srcdim_reg = DVOC_SRCDIM;
 309                 break;
 310         }
 311
 312         /* Save the data order, since I don't know what it should be set to. */
 313         dvo_val = I915_READ(dvo_reg) &
 314                   (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG);
 315         dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |
 316                    DVO_BLANK_ACTIVE_HIGH;
 317
 318         if (pipe == 1)
 319                 dvo_val |= DVO_PIPE_B_SELECT;
 320         dvo_val |= DVO_PIPE_STALL;
 321         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 322                 dvo_val |= DVO_HSYNC_ACTIVE_HIGH;
 323         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 324                 dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
 325
 326         /*I915_WRITE(DVOB_SRCDIM,
 327           (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
 328           (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/
 329         I915_WRITE(dvo_srcdim_reg,
 330                    (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
 331                    (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));
 332         /*I915_WRITE(DVOB, dvo_val);*/
 333         I915_WRITE(dvo_reg, dvo_val);
 334 }
 335
 336 /**
 337  * Detect the output connection on our DVO device.
 338  *
 339  * Unimplemented.
 340  */
 341 static enum drm_connector_status
 342 intel_dvo_detect(struct drm_connector *connector, bool force)
 343 {
 344         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 345         DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
 346                       connector->base.id, connector->name);
 347         return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev);
 348 }
 349
 350 static int intel_dvo_get_modes(struct drm_connector *connector)
 351 {
 352         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 353         struct drm_i915_private *dev_priv = connector->dev->dev_private;
 354
 355         /* We should probably have an i2c driver get_modes function for those
 356          * devices which will have a fixed set of modes determined by the chip
 357          * (TV-out, for example), but for now with just TMDS and LVDS,
 358          * that's not the case.
 359          */
 360         intel_ddc_get_modes(connector,
 361                             intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC));
 362         if (!list_empty(&connector->probed_modes))
 363                 return 1;
 364
 365         if (intel_dvo->panel_fixed_mode != NULL) {
 366                 struct drm_display_mode *mode;
 367                 mode = drm_mode_duplicate(connector->dev, intel_dvo->panel_fixed_mode);
 368                 if (mode) {
 369                         drm_mode_probed_add(connector, mode);
 370                         return 1;
 371                 }
 372         }
 373
 374         return 0;
 375 }
 376
 377 static void intel_dvo_destroy(struct drm_connector *connector)
 378 {
 379         drm_connector_cleanup(connector);
 380         kfree(connector);
 381 }
 382
 383 static const struct drm_connector_funcs intel_dvo_connector_funcs = {
 384         .dpms = intel_dvo_dpms,
 385         .detect = intel_dvo_detect,
 386         .destroy = intel_dvo_destroy,
 387         .fill_modes = drm_helper_probe_single_connector_modes,
 388 };
 389
 390 static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {
 391         .mode_valid = intel_dvo_mode_valid,
 392         .get_modes = intel_dvo_get_modes,
 393         .best_encoder = intel_best_encoder,
 394 };
 395
 396 static void intel_dvo_enc_destroy(struct drm_encoder *encoder)
 397 {
 398         struct intel_dvo *intel_dvo = enc_to_dvo(to_intel_encoder(encoder));
 399
 400         if (intel_dvo->dev.dev_ops->destroy)
 401                 intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev);
 402
 403         kfree(intel_dvo->panel_fixed_mode);
 404
 405         intel_encoder_destroy(encoder);
 406 }
 407
 408 static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
 409         .destroy = intel_dvo_enc_destroy,
 410 };
 411
 412 /**
 413  * Attempts to get a fixed panel timing for LVDS (currently only the i830).
 414  *
 415  * Other chips with DVO LVDS will need to extend this to deal with the LVDS
 416  * chip being on DVOB/C and having multiple pipes.
 417  */
 418 static struct drm_display_mode *
 419 intel_dvo_get_current_mode(struct drm_connector *connector)
 420 {
 421         struct drm_device *dev = connector->dev;
 422         struct drm_i915_private *dev_priv = dev->dev_private;
 423         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 424         uint32_t dvo_val = I915_READ(intel_dvo->dev.dvo_reg);
 425         struct drm_display_mode *mode = NULL;
 426
 427         /* If the DVO port is active, that'll be the LVDS, so we can pull out
 428          * its timings to get how the BIOS set up the panel.
 429          */
 430         if (dvo_val & DVO_ENABLE) {
 431                 struct drm_crtc *crtc;
 432                 int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
 433
 434                 crtc = intel_get_crtc_for_pipe(dev, pipe);
 435                 if (crtc) {
 436                         mode = intel_crtc_mode_get(dev, crtc);
 437                         if (mode) {
 438                                 mode->type |= DRM_MODE_TYPE_PREFERRED;
 439                                 if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
 440                                         mode->flags |= DRM_MODE_FLAG_PHSYNC;
 441                                 if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)
 442                                         mode->flags |= DRM_MODE_FLAG_PVSYNC;
 443                         }
 444                 }
 445         }
 446
 447         return mode;
 448 }
 449
 450 void intel_dvo_init(struct drm_device *dev)
 451 {
 452         struct drm_i915_private *dev_priv = dev->dev_private;
 453         struct intel_encoder *intel_encoder;
 454         struct intel_dvo *intel_dvo;
 455         struct intel_connector *intel_connector;
 456         int i;
 457         int encoder_type = DRM_MODE_ENCODER_NONE;
 458
 459         intel_dvo = kzalloc(sizeof(*intel_dvo), GFP_KERNEL);
 460         if (!intel_dvo)
 461                 return;
 462
 463         intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
 464         if (!intel_connector) {
 465                 kfree(intel_dvo);
 466                 return;
 467         }
 468
 469         intel_encoder = &intel_dvo->base;
 470         drm_encoder_init(dev, &intel_encoder->base,
 471                          &intel_dvo_enc_funcs, encoder_type);
 472
 473         intel_encoder->disable = intel_disable_dvo;
 474         intel_encoder->enable = intel_enable_dvo;
 475         intel_encoder->get_hw_state = intel_dvo_get_hw_state;
 476         intel_encoder->get_config = intel_dvo_get_config;
 477         intel_encoder->compute_config = intel_dvo_compute_config;
 478         intel_encoder->pre_enable = intel_dvo_pre_enable;
 479         intel_connector->get_hw_state = intel_dvo_connector_get_hw_state;
 480         intel_connector->unregister = intel_connector_unregister;
 481
 482         /* Now, try to find a controller */
 483         for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
 484                 struct drm_connector *connector = &intel_connector->base;
 485                 const struct intel_dvo_device *dvo = &intel_dvo_devices[i];
 486                 struct i2c_adapter *i2c;
 487                 int gpio;
 488                 bool dvoinit;
 489
 490                 /* Allow the I2C driver info to specify the GPIO to be used in
 491                  * special cases, but otherwise default to what's defined
 492                  * in the spec.
 493                  */
 494                 if (intel_gmbus_is_port_valid(dvo->gpio))
 495                         gpio = dvo->gpio;
 496                 else if (dvo->type == INTEL_DVO_CHIP_LVDS)
 497                         gpio = GMBUS_PORT_SSC;
 498                 else
 499                         gpio = GMBUS_PORT_DPB;
 500
 501                 /* Set up the I2C bus necessary for the chip we're probing.
 502                  * It appears that everything is on GPIOE except for panels
 503                  * on i830 laptops, which are on GPIOB (DVOA).
 504                  */
 505                 i2c = intel_gmbus_get_adapter(dev_priv, gpio);
 506
 507                 intel_dvo->dev = *dvo;
 508
 509                 /* GMBUS NAK handling seems to be unstable, hence let the
 510                  * transmitter detection run in bit banging mode for now.
 511                  */
 512                 intel_gmbus_force_bit(i2c, true);
 513
 514                 dvoinit = dvo->dev_ops->init(&intel_dvo->dev, i2c);
 515
 516                 intel_gmbus_force_bit(i2c, false);
 517
 518                 if (!dvoinit)
 519                         continue;
 520
 521                 intel_encoder->type = INTEL_OUTPUT_DVO;
 522                 intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
 523                 switch (dvo->type) {
 524                 case INTEL_DVO_CHIP_TMDS:
 525                         intel_encoder->cloneable = (1 << INTEL_OUTPUT_ANALOG) |
 526                                 (1 << INTEL_OUTPUT_DVO);
 527                         drm_connector_init(dev, connector,
 528                                            &intel_dvo_connector_funcs,
 529                                            DRM_MODE_CONNECTOR_DVII);
 530                         encoder_type = DRM_MODE_ENCODER_TMDS;
 531                         break;
 532                 case INTEL_DVO_CHIP_LVDS:
 533                         intel_encoder->cloneable = 0;
 534                         drm_connector_init(dev, connector,
 535                                            &intel_dvo_connector_funcs,
 536                                            DRM_MODE_CONNECTOR_LVDS);
 537                         encoder_type = DRM_MODE_ENCODER_LVDS;
 538                         break;
 539                 }
 540
 541                 drm_connector_helper_add(connector,
 542                                          &intel_dvo_connector_helper_funcs);
 543                 connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 544                 connector->interlace_allowed = false;
 545                 connector->doublescan_allowed = false;
 546
 547                 intel_connector_attach_encoder(intel_connector, intel_encoder);
 548                 if (dvo->type == INTEL_DVO_CHIP_LVDS) {
 549                         /* For our LVDS chipsets, we should hopefully be able
 550                          * to dig the fixed panel mode out of the BIOS data.
 551                          * However, it's in a different format from the BIOS
 552                          * data on chipsets with integrated LVDS (stored in AIM
 553                          * headers, likely), so for now, just get the current
 554                          * mode being output through DVO.
 555                          */
 556                         intel_dvo->panel_fixed_mode =
 557                                 intel_dvo_get_current_mode(connector);
 558                         intel_dvo->panel_wants_dither = true;
 559                 }
 560
 561                 drm_sysfs_connector_add(connector);
 562                 return;
 563         }
 564
 565         drm_encoder_cleanup(&intel_encoder->base);
 566         kfree(intel_dvo);
 567         kfree(intel_connector);
 568 }