2 * Copyright © 2008 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
24 * Keith Packard <keithp@keithp.com>
28 #include <linux/i2c.h>
29 #include <linux/slab.h>
30 #include <linux/export.h>
31 #include <linux/notifier.h>
32 #include <linux/reboot.h>
34 #include <drm/drm_atomic_helper.h>
35 #include <drm/drm_crtc.h>
36 #include <drm/drm_crtc_helper.h>
37 #include <drm/drm_edid.h>
38 #include "intel_drv.h"
39 #include <drm/i915_drm.h>
42 #define DP_LINK_CHECK_TIMEOUT (10 * 1000)
49 static const struct dp_link_dpll gen4_dpll[] = {
51 { .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8 } },
53 { .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2 } }
56 static const struct dp_link_dpll pch_dpll[] = {
58 { .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9 } },
60 { .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8 } }
63 static const struct dp_link_dpll vlv_dpll[] = {
65 { .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81 } },
67 { .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } }
71 * CHV supports eDP 1.4 that have more link rates.
72 * Below only provides the fixed rate but exclude variable rate.
74 static const struct dp_link_dpll chv_dpll[] = {
76 * CHV requires to program fractional division for m2.
77 * m2 is stored in fixed point format using formula below
78 * (m2_int << 22) | m2_fraction
80 { DP_LINK_BW_1_62, /* m2_int = 32, m2_fraction = 1677722 */
81 { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } },
82 { DP_LINK_BW_2_7, /* m2_int = 27, m2_fraction = 0 */
83 { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } },
84 { DP_LINK_BW_5_4, /* m2_int = 27, m2_fraction = 0 */
85 { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
89 * is_edp - is the given port attached to an eDP panel (either CPU or PCH)
90 * @intel_dp: DP struct
92 * If a CPU or PCH DP output is attached to an eDP panel, this function
93 * will return true, and false otherwise.
95 static bool is_edp(struct intel_dp *intel_dp)
97 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
99 return intel_dig_port->base.type == INTEL_OUTPUT_EDP;
102 static struct drm_device *intel_dp_to_dev(struct intel_dp *intel_dp)
104 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
106 return intel_dig_port->base.base.dev;
109 static struct intel_dp *intel_attached_dp(struct drm_connector *connector)
111 return enc_to_intel_dp(&intel_attached_encoder(connector)->base);
114 static void intel_dp_link_down(struct intel_dp *intel_dp);
115 static bool edp_panel_vdd_on(struct intel_dp *intel_dp);
116 static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
117 static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp);
118 static void vlv_steal_power_sequencer(struct drm_device *dev,
122 intel_dp_max_link_bw(struct intel_dp *intel_dp)
124 int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE];
125 struct drm_device *dev = intel_dp->attached_connector->base.dev;
127 switch (max_link_bw) {
128 case DP_LINK_BW_1_62:
131 case DP_LINK_BW_5_4: /* 1.2 capable displays may advertise higher bw */
132 if (((IS_HASWELL(dev) && !IS_HSW_ULX(dev)) ||
133 INTEL_INFO(dev)->gen >= 8) &&
134 intel_dp->dpcd[DP_DPCD_REV] >= 0x12)
135 max_link_bw = DP_LINK_BW_5_4;
137 max_link_bw = DP_LINK_BW_2_7;
140 WARN(1, "invalid max DP link bw val %x, using 1.62Gbps\n",
142 max_link_bw = DP_LINK_BW_1_62;
148 static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
150 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
151 struct drm_device *dev = intel_dig_port->base.base.dev;
152 u8 source_max, sink_max;
155 if (HAS_DDI(dev) && intel_dig_port->port == PORT_A &&
156 (intel_dig_port->saved_port_bits & DDI_A_4_LANES) == 0)
159 sink_max = drm_dp_max_lane_count(intel_dp->dpcd);
161 return min(source_max, sink_max);
165 * The units on the numbers in the next two are... bizarre. Examples will
166 * make it clearer; this one parallels an example in the eDP spec.
168 * intel_dp_max_data_rate for one lane of 2.7GHz evaluates as:
170 * 270000 * 1 * 8 / 10 == 216000
172 * The actual data capacity of that configuration is 2.16Gbit/s, so the
173 * units are decakilobits. ->clock in a drm_display_mode is in kilohertz -
174 * or equivalently, kilopixels per second - so for 1680x1050R it'd be
175 * 119000. At 18bpp that's 2142000 kilobits per second.
177 * Thus the strange-looking division by 10 in intel_dp_link_required, to
178 * get the result in decakilobits instead of kilobits.
182 intel_dp_link_required(int pixel_clock, int bpp)
184 return (pixel_clock * bpp + 9) / 10;
188 intel_dp_max_data_rate(int max_link_clock, int max_lanes)
190 return (max_link_clock * max_lanes * 8) / 10;
193 static enum drm_mode_status
194 intel_dp_mode_valid(struct drm_connector *connector,
195 struct drm_display_mode *mode)
197 struct intel_dp *intel_dp = intel_attached_dp(connector);
198 struct intel_connector *intel_connector = to_intel_connector(connector);
199 struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
200 int target_clock = mode->clock;
201 int max_rate, mode_rate, max_lanes, max_link_clock;
203 if (is_edp(intel_dp) && fixed_mode) {
204 if (mode->hdisplay > fixed_mode->hdisplay)
207 if (mode->vdisplay > fixed_mode->vdisplay)
210 target_clock = fixed_mode->clock;
213 max_link_clock = drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp));
214 max_lanes = intel_dp_max_lane_count(intel_dp);
216 max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
217 mode_rate = intel_dp_link_required(target_clock, 18);
219 if (mode_rate > max_rate)
220 return MODE_CLOCK_HIGH;
222 if (mode->clock < 10000)
223 return MODE_CLOCK_LOW;
225 if (mode->flags & DRM_MODE_FLAG_DBLCLK)
226 return MODE_H_ILLEGAL;
231 uint32_t intel_dp_pack_aux(const uint8_t *src, int src_bytes)
238 for (i = 0; i < src_bytes; i++)
239 v |= ((uint32_t) src[i]) << ((3-i) * 8);
243 void intel_dp_unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
248 for (i = 0; i < dst_bytes; i++)
249 dst[i] = src >> ((3-i) * 8);
252 /* hrawclock is 1/4 the FSB frequency */
254 intel_hrawclk(struct drm_device *dev)
256 struct drm_i915_private *dev_priv = dev->dev_private;
259 /* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */
260 if (IS_VALLEYVIEW(dev))
263 clkcfg = I915_READ(CLKCFG);
264 switch (clkcfg & CLKCFG_FSB_MASK) {
273 case CLKCFG_FSB_1067:
275 case CLKCFG_FSB_1333:
277 /* these two are just a guess; one of them might be right */
278 case CLKCFG_FSB_1600:
279 case CLKCFG_FSB_1600_ALT:
287 intel_dp_init_panel_power_sequencer(struct drm_device *dev,
288 struct intel_dp *intel_dp);
290 intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
291 struct intel_dp *intel_dp);
293 static void pps_lock(struct intel_dp *intel_dp)
295 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
296 struct intel_encoder *encoder = &intel_dig_port->base;
297 struct drm_device *dev = encoder->base.dev;
298 struct drm_i915_private *dev_priv = dev->dev_private;
299 enum intel_display_power_domain power_domain;
302 * See vlv_power_sequencer_reset() why we need
303 * a power domain reference here.
305 power_domain = intel_display_port_power_domain(encoder);
306 intel_display_power_get(dev_priv, power_domain);
308 mutex_lock(&dev_priv->pps_mutex);
311 static void pps_unlock(struct intel_dp *intel_dp)
313 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
314 struct intel_encoder *encoder = &intel_dig_port->base;
315 struct drm_device *dev = encoder->base.dev;
316 struct drm_i915_private *dev_priv = dev->dev_private;
317 enum intel_display_power_domain power_domain;
319 mutex_unlock(&dev_priv->pps_mutex);
321 power_domain = intel_display_port_power_domain(encoder);
322 intel_display_power_put(dev_priv, power_domain);
326 vlv_power_sequencer_kick(struct intel_dp *intel_dp)
328 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
329 struct drm_device *dev = intel_dig_port->base.base.dev;
330 struct drm_i915_private *dev_priv = dev->dev_private;
331 enum pipe pipe = intel_dp->pps_pipe;
335 if (WARN(I915_READ(intel_dp->output_reg) & DP_PORT_EN,
336 "skipping pipe %c power seqeuncer kick due to port %c being active\n",
337 pipe_name(pipe), port_name(intel_dig_port->port)))
340 DRM_DEBUG_KMS("kicking pipe %c power sequencer for port %c\n",
341 pipe_name(pipe), port_name(intel_dig_port->port));
343 /* Preserve the BIOS-computed detected bit. This is
344 * supposed to be read-only.
346 DP = I915_READ(intel_dp->output_reg) & DP_DETECTED;
347 DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
348 DP |= DP_PORT_WIDTH(1);
349 DP |= DP_LINK_TRAIN_PAT_1;
351 if (IS_CHERRYVIEW(dev))
352 DP |= DP_PIPE_SELECT_CHV(pipe);
353 else if (pipe == PIPE_B)
354 DP |= DP_PIPEB_SELECT;
356 pll_enabled = I915_READ(DPLL(pipe)) & DPLL_VCO_ENABLE;
359 * The DPLL for the pipe must be enabled for this to work.
360 * So enable temporarily it if it's not already enabled.
363 vlv_force_pll_on(dev, pipe, IS_CHERRYVIEW(dev) ?
364 &chv_dpll[0].dpll : &vlv_dpll[0].dpll);
367 * Similar magic as in intel_dp_enable_port().
368 * We _must_ do this port enable + disable trick
369 * to make this power seqeuencer lock onto the port.
370 * Otherwise even VDD force bit won't work.
372 I915_WRITE(intel_dp->output_reg, DP);
373 POSTING_READ(intel_dp->output_reg);
375 I915_WRITE(intel_dp->output_reg, DP | DP_PORT_EN);
376 POSTING_READ(intel_dp->output_reg);
378 I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
379 POSTING_READ(intel_dp->output_reg);
382 vlv_force_pll_off(dev, pipe);
386 vlv_power_sequencer_pipe(struct intel_dp *intel_dp)
388 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
389 struct drm_device *dev = intel_dig_port->base.base.dev;
390 struct drm_i915_private *dev_priv = dev->dev_private;
391 struct intel_encoder *encoder;
392 unsigned int pipes = (1 << PIPE_A) | (1 << PIPE_B);
395 lockdep_assert_held(&dev_priv->pps_mutex);
397 /* We should never land here with regular DP ports */
398 WARN_ON(!is_edp(intel_dp));
400 if (intel_dp->pps_pipe != INVALID_PIPE)
401 return intel_dp->pps_pipe;
404 * We don't have power sequencer currently.
405 * Pick one that's not used by other ports.
407 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
409 struct intel_dp *tmp;
411 if (encoder->type != INTEL_OUTPUT_EDP)
414 tmp = enc_to_intel_dp(&encoder->base);
416 if (tmp->pps_pipe != INVALID_PIPE)
417 pipes &= ~(1 << tmp->pps_pipe);
421 * Didn't find one. This should not happen since there
422 * are two power sequencers and up to two eDP ports.
424 if (WARN_ON(pipes == 0))
427 pipe = ffs(pipes) - 1;
429 vlv_steal_power_sequencer(dev, pipe);
430 intel_dp->pps_pipe = pipe;
432 DRM_DEBUG_KMS("picked pipe %c power sequencer for port %c\n",
433 pipe_name(intel_dp->pps_pipe),
434 port_name(intel_dig_port->port));
436 /* init power sequencer on this pipe and port */
437 intel_dp_init_panel_power_sequencer(dev, intel_dp);
438 intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
441 * Even vdd force doesn't work until we've made
442 * the power sequencer lock in on the port.
444 vlv_power_sequencer_kick(intel_dp);
446 return intel_dp->pps_pipe;
449 typedef bool (*vlv_pipe_check)(struct drm_i915_private *dev_priv,
452 static bool vlv_pipe_has_pp_on(struct drm_i915_private *dev_priv,
455 return I915_READ(VLV_PIPE_PP_STATUS(pipe)) & PP_ON;
458 static bool vlv_pipe_has_vdd_on(struct drm_i915_private *dev_priv,
461 return I915_READ(VLV_PIPE_PP_CONTROL(pipe)) & EDP_FORCE_VDD;
464 static bool vlv_pipe_any(struct drm_i915_private *dev_priv,
471 vlv_initial_pps_pipe(struct drm_i915_private *dev_priv,
473 vlv_pipe_check pipe_check)
477 for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) {
478 u32 port_sel = I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe)) &
479 PANEL_PORT_SELECT_MASK;
481 if (port_sel != PANEL_PORT_SELECT_VLV(port))
484 if (!pipe_check(dev_priv, pipe))
494 vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp)
496 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
497 struct drm_device *dev = intel_dig_port->base.base.dev;
498 struct drm_i915_private *dev_priv = dev->dev_private;
499 enum port port = intel_dig_port->port;
501 lockdep_assert_held(&dev_priv->pps_mutex);
503 /* try to find a pipe with this port selected */
504 /* first pick one where the panel is on */
505 intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
507 /* didn't find one? pick one where vdd is on */
508 if (intel_dp->pps_pipe == INVALID_PIPE)
509 intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
510 vlv_pipe_has_vdd_on);
511 /* didn't find one? pick one with just the correct port */
512 if (intel_dp->pps_pipe == INVALID_PIPE)
513 intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
516 /* didn't find one? just let vlv_power_sequencer_pipe() pick one when needed */
517 if (intel_dp->pps_pipe == INVALID_PIPE) {
518 DRM_DEBUG_KMS("no initial power sequencer for port %c\n",
523 DRM_DEBUG_KMS("initial power sequencer for port %c: pipe %c\n",
524 port_name(port), pipe_name(intel_dp->pps_pipe));
526 intel_dp_init_panel_power_sequencer(dev, intel_dp);
527 intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
530 void vlv_power_sequencer_reset(struct drm_i915_private *dev_priv)
532 struct drm_device *dev = dev_priv->dev;
533 struct intel_encoder *encoder;
535 if (WARN_ON(!IS_VALLEYVIEW(dev)))
539 * We can't grab pps_mutex here due to deadlock with power_domain
540 * mutex when power_domain functions are called while holding pps_mutex.
541 * That also means that in order to use pps_pipe the code needs to
542 * hold both a power domain reference and pps_mutex, and the power domain
543 * reference get/put must be done while _not_ holding pps_mutex.
544 * pps_{lock,unlock}() do these steps in the correct order, so one
545 * should use them always.
548 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
549 struct intel_dp *intel_dp;
551 if (encoder->type != INTEL_OUTPUT_EDP)
554 intel_dp = enc_to_intel_dp(&encoder->base);
555 intel_dp->pps_pipe = INVALID_PIPE;
559 static u32 _pp_ctrl_reg(struct intel_dp *intel_dp)
561 struct drm_device *dev = intel_dp_to_dev(intel_dp);
563 if (HAS_PCH_SPLIT(dev))
564 return PCH_PP_CONTROL;
566 return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp));
569 static u32 _pp_stat_reg(struct intel_dp *intel_dp)
571 struct drm_device *dev = intel_dp_to_dev(intel_dp);
573 if (HAS_PCH_SPLIT(dev))
574 return PCH_PP_STATUS;
576 return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp));
579 /* Reboot notifier handler to shutdown panel power to guarantee T12 timing
580 This function only applicable when panel PM state is not to be tracked */
581 static int edp_notify_handler(struct notifier_block *this, unsigned long code,
584 struct intel_dp *intel_dp = container_of(this, typeof(* intel_dp),
586 struct drm_device *dev = intel_dp_to_dev(intel_dp);
587 struct drm_i915_private *dev_priv = dev->dev_private;
589 u32 pp_ctrl_reg, pp_div_reg;
591 if (!is_edp(intel_dp) || code != SYS_RESTART)
596 if (IS_VALLEYVIEW(dev)) {
597 enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
599 pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
600 pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
601 pp_div = I915_READ(pp_div_reg);
602 pp_div &= PP_REFERENCE_DIVIDER_MASK;
604 /* 0x1F write to PP_DIV_REG sets max cycle delay */
605 I915_WRITE(pp_div_reg, pp_div | 0x1F);
606 I915_WRITE(pp_ctrl_reg, PANEL_UNLOCK_REGS | PANEL_POWER_OFF);
607 msleep(intel_dp->panel_power_cycle_delay);
610 pps_unlock(intel_dp);
615 static bool edp_have_panel_power(struct intel_dp *intel_dp)
617 struct drm_device *dev = intel_dp_to_dev(intel_dp);
618 struct drm_i915_private *dev_priv = dev->dev_private;
620 lockdep_assert_held(&dev_priv->pps_mutex);
622 if (IS_VALLEYVIEW(dev) &&
623 intel_dp->pps_pipe == INVALID_PIPE)
626 return (I915_READ(_pp_stat_reg(intel_dp)) & PP_ON) != 0;
629 static bool edp_have_panel_vdd(struct intel_dp *intel_dp)
631 struct drm_device *dev = intel_dp_to_dev(intel_dp);
632 struct drm_i915_private *dev_priv = dev->dev_private;
634 lockdep_assert_held(&dev_priv->pps_mutex);
636 if (IS_VALLEYVIEW(dev) &&
637 intel_dp->pps_pipe == INVALID_PIPE)
640 return I915_READ(_pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD;
644 intel_dp_check_edp(struct intel_dp *intel_dp)
646 struct drm_device *dev = intel_dp_to_dev(intel_dp);
647 struct drm_i915_private *dev_priv = dev->dev_private;
649 if (!is_edp(intel_dp))
652 if (!edp_have_panel_power(intel_dp) && !edp_have_panel_vdd(intel_dp)) {
653 WARN(1, "eDP powered off while attempting aux channel communication.\n");
654 DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n",
655 I915_READ(_pp_stat_reg(intel_dp)),
656 I915_READ(_pp_ctrl_reg(intel_dp)));
661 intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
663 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
664 struct drm_device *dev = intel_dig_port->base.base.dev;
665 struct drm_i915_private *dev_priv = dev->dev_private;
666 uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg;
670 #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
672 done = wait_event_timeout(dev_priv->gmbus_wait_queue, C,
673 msecs_to_jiffies_timeout(10));
675 done = wait_for_atomic(C, 10) == 0;
677 DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
684 static uint32_t i9xx_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
686 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
687 struct drm_device *dev = intel_dig_port->base.base.dev;
690 * The clock divider is based off the hrawclk, and would like to run at
691 * 2MHz. So, take the hrawclk value and divide by 2 and use that
693 return index ? 0 : intel_hrawclk(dev) / 2;
696 static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
698 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
699 struct drm_device *dev = intel_dig_port->base.base.dev;
704 if (intel_dig_port->port == PORT_A) {
705 if (IS_GEN6(dev) || IS_GEN7(dev))
706 return 200; /* SNB & IVB eDP input clock at 400Mhz */
708 return 225; /* eDP input clock at 450Mhz */
710 return DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
714 static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
716 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
717 struct drm_device *dev = intel_dig_port->base.base.dev;
718 struct drm_i915_private *dev_priv = dev->dev_private;
720 if (intel_dig_port->port == PORT_A) {
723 return DIV_ROUND_CLOSEST(intel_ddi_get_cdclk_freq(dev_priv), 2000);
724 } else if (dev_priv->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
725 /* Workaround for non-ULT HSW */
732 return index ? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev), 2);
736 static uint32_t vlv_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
738 return index ? 0 : 100;
741 static uint32_t skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
744 * SKL doesn't need us to program the AUX clock divider (Hardware will
745 * derive the clock from CDCLK automatically). We still implement the
746 * get_aux_clock_divider vfunc to plug-in into the existing code.
748 return index ? 0 : 1;
751 static uint32_t i9xx_get_aux_send_ctl(struct intel_dp *intel_dp,
754 uint32_t aux_clock_divider)
756 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
757 struct drm_device *dev = intel_dig_port->base.base.dev;
758 uint32_t precharge, timeout;
765 if (IS_BROADWELL(dev) && intel_dp->aux_ch_ctl_reg == DPA_AUX_CH_CTL)
766 timeout = DP_AUX_CH_CTL_TIME_OUT_600us;
768 timeout = DP_AUX_CH_CTL_TIME_OUT_400us;
770 return DP_AUX_CH_CTL_SEND_BUSY |
772 (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
773 DP_AUX_CH_CTL_TIME_OUT_ERROR |
775 DP_AUX_CH_CTL_RECEIVE_ERROR |
776 (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
777 (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
778 (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT);
781 static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp,
786 return DP_AUX_CH_CTL_SEND_BUSY |
788 (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
789 DP_AUX_CH_CTL_TIME_OUT_ERROR |
790 DP_AUX_CH_CTL_TIME_OUT_1600us |
791 DP_AUX_CH_CTL_RECEIVE_ERROR |
792 (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
793 DP_AUX_CH_CTL_SYNC_PULSE_SKL(32);
797 intel_dp_aux_ch(struct intel_dp *intel_dp,
798 const uint8_t *send, int send_bytes,
799 uint8_t *recv, int recv_size)
801 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
802 struct drm_device *dev = intel_dig_port->base.base.dev;
803 struct drm_i915_private *dev_priv = dev->dev_private;
804 uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg;
805 uint32_t ch_data = ch_ctl + 4;
806 uint32_t aux_clock_divider;
807 int i, ret, recv_bytes;
810 bool has_aux_irq = HAS_AUX_IRQ(dev);
816 * We will be called with VDD already enabled for dpcd/edid/oui reads.
817 * In such cases we want to leave VDD enabled and it's up to upper layers
818 * to turn it off. But for eg. i2c-dev access we need to turn it on/off
821 vdd = edp_panel_vdd_on(intel_dp);
823 /* dp aux is extremely sensitive to irq latency, hence request the
824 * lowest possible wakeup latency and so prevent the cpu from going into
827 pm_qos_update_request(&dev_priv->pm_qos, 0);
829 intel_dp_check_edp(intel_dp);
831 intel_aux_display_runtime_get(dev_priv);
833 /* Try to wait for any previous AUX channel activity */
834 for (try = 0; try < 3; try++) {
835 status = I915_READ_NOTRACE(ch_ctl);
836 if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
842 WARN(1, "dp_aux_ch not started status 0x%08x\n",
848 /* Only 5 data registers! */
849 if (WARN_ON(send_bytes > 20 || recv_size > 20)) {
854 while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) {
855 u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp,
860 /* Must try at least 3 times according to DP spec */
861 for (try = 0; try < 5; try++) {
862 /* Load the send data into the aux channel data registers */
863 for (i = 0; i < send_bytes; i += 4)
864 I915_WRITE(ch_data + i,
865 intel_dp_pack_aux(send + i,
868 /* Send the command and wait for it to complete */
869 I915_WRITE(ch_ctl, send_ctl);
871 status = intel_dp_aux_wait_done(intel_dp, has_aux_irq);
873 /* Clear done status and any errors */
877 DP_AUX_CH_CTL_TIME_OUT_ERROR |
878 DP_AUX_CH_CTL_RECEIVE_ERROR);
880 if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR |
881 DP_AUX_CH_CTL_RECEIVE_ERROR))
883 if (status & DP_AUX_CH_CTL_DONE)
886 if (status & DP_AUX_CH_CTL_DONE)
890 if ((status & DP_AUX_CH_CTL_DONE) == 0) {
891 DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
896 /* Check for timeout or receive error.
897 * Timeouts occur when the sink is not connected
899 if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
900 DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
905 /* Timeouts occur when the device isn't connected, so they're
906 * "normal" -- don't fill the kernel log with these */
907 if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
908 DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
913 /* Unload any bytes sent back from the other side */
914 recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
915 DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
916 if (recv_bytes > recv_size)
917 recv_bytes = recv_size;
919 for (i = 0; i < recv_bytes; i += 4)
920 intel_dp_unpack_aux(I915_READ(ch_data + i),
921 recv + i, recv_bytes - i);
925 pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE);
926 intel_aux_display_runtime_put(dev_priv);
929 edp_panel_vdd_off(intel_dp, false);
931 pps_unlock(intel_dp);
936 #define BARE_ADDRESS_SIZE 3
937 #define HEADER_SIZE (BARE_ADDRESS_SIZE + 1)
939 intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
941 struct intel_dp *intel_dp = container_of(aux, struct intel_dp, aux);
942 uint8_t txbuf[20], rxbuf[20];
943 size_t txsize, rxsize;
946 txbuf[0] = msg->request << 4;
947 txbuf[1] = msg->address >> 8;
948 txbuf[2] = msg->address & 0xff;
949 txbuf[3] = msg->size - 1;
951 switch (msg->request & ~DP_AUX_I2C_MOT) {
952 case DP_AUX_NATIVE_WRITE:
953 case DP_AUX_I2C_WRITE:
954 txsize = msg->size ? HEADER_SIZE + msg->size : BARE_ADDRESS_SIZE;
957 if (WARN_ON(txsize > 20))
960 memcpy(txbuf + HEADER_SIZE, msg->buffer, msg->size);
962 ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize);
964 msg->reply = rxbuf[0] >> 4;
966 /* Return payload size. */
971 case DP_AUX_NATIVE_READ:
972 case DP_AUX_I2C_READ:
973 txsize = msg->size ? HEADER_SIZE : BARE_ADDRESS_SIZE;
974 rxsize = msg->size + 1;
976 if (WARN_ON(rxsize > 20))
979 ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize);
981 msg->reply = rxbuf[0] >> 4;
983 * Assume happy day, and copy the data. The caller is
984 * expected to check msg->reply before touching it.
986 * Return payload size.
989 memcpy(msg->buffer, rxbuf + 1, ret);
1002 intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
1004 struct drm_device *dev = intel_dp_to_dev(intel_dp);
1005 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
1006 enum port port = intel_dig_port->port;
1007 const char *name = NULL;
1012 intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL;
1016 intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL;
1020 intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL;
1024 intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL;
1032 * The AUX_CTL register is usually DP_CTL + 0x10.
1034 * On Haswell and Broadwell though:
1035 * - Both port A DDI_BUF_CTL and DDI_AUX_CTL are on the CPU
1036 * - Port B/C/D AUX channels are on the PCH, DDI_BUF_CTL on the CPU
1038 * Skylake moves AUX_CTL back next to DDI_BUF_CTL, on the CPU.
1040 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
1041 intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
1043 intel_dp->aux.name = name;
1044 intel_dp->aux.dev = dev->dev;
1045 intel_dp->aux.transfer = intel_dp_aux_transfer;
1047 DRM_DEBUG_KMS("registering %s bus for %s\n", name,
1048 connector->base.kdev->kobj.name);
1050 ret = drm_dp_aux_register(&intel_dp->aux);
1052 DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
1057 ret = sysfs_create_link(&connector->base.kdev->kobj,
1058 &intel_dp->aux.ddc.dev.kobj,
1059 intel_dp->aux.ddc.dev.kobj.name);
1061 DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret);
1062 drm_dp_aux_unregister(&intel_dp->aux);
1067 intel_dp_connector_unregister(struct intel_connector *intel_connector)
1069 struct intel_dp *intel_dp = intel_attached_dp(&intel_connector->base);
1071 if (!intel_connector->mst_port)
1072 sysfs_remove_link(&intel_connector->base.kdev->kobj,
1073 intel_dp->aux.ddc.dev.kobj.name);
1074 intel_connector_unregister(intel_connector);
1078 skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_bw)
1082 pipe_config->ddi_pll_sel = SKL_DPLL0;
1083 pipe_config->dpll_hw_state.cfgcr1 = 0;
1084 pipe_config->dpll_hw_state.cfgcr2 = 0;
1086 ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
1088 case DP_LINK_BW_1_62:
1089 ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810,
1092 case DP_LINK_BW_2_7:
1093 ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350,
1096 case DP_LINK_BW_5_4:
1097 ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700,
1101 pipe_config->dpll_hw_state.ctrl1 = ctrl1;
1105 hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config, int link_bw)
1108 case DP_LINK_BW_1_62:
1109 pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
1111 case DP_LINK_BW_2_7:
1112 pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
1114 case DP_LINK_BW_5_4:
1115 pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
1121 intel_dp_set_clock(struct intel_encoder *encoder,
1122 struct intel_crtc_state *pipe_config, int link_bw)
1124 struct drm_device *dev = encoder->base.dev;
1125 const struct dp_link_dpll *divisor = NULL;
1129 divisor = gen4_dpll;
1130 count = ARRAY_SIZE(gen4_dpll);
1131 } else if (HAS_PCH_SPLIT(dev)) {
1133 count = ARRAY_SIZE(pch_dpll);
1134 } else if (IS_CHERRYVIEW(dev)) {
1136 count = ARRAY_SIZE(chv_dpll);
1137 } else if (IS_VALLEYVIEW(dev)) {
1139 count = ARRAY_SIZE(vlv_dpll);
1142 if (divisor && count) {
1143 for (i = 0; i < count; i++) {
1144 if (link_bw == divisor[i].link_bw) {
1145 pipe_config->dpll = divisor[i].dpll;
1146 pipe_config->clock_set = true;
1154 intel_dp_compute_config(struct intel_encoder *encoder,
1155 struct intel_crtc_state *pipe_config)
1157 struct drm_device *dev = encoder->base.dev;
1158 struct drm_i915_private *dev_priv = dev->dev_private;
1159 struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
1160 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
1161 enum port port = dp_to_dig_port(intel_dp)->port;
1162 struct intel_crtc *intel_crtc = encoder->new_crtc;
1163 struct intel_connector *intel_connector = intel_dp->attached_connector;
1164 int lane_count, clock;
1165 int min_lane_count = 1;
1166 int max_lane_count = intel_dp_max_lane_count(intel_dp);
1167 /* Conveniently, the link BW constants become indices with a shift...*/
1169 int max_clock = intel_dp_max_link_bw(intel_dp) >> 3;
1171 static int bws[] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 };
1172 int link_avail, link_clock;
1174 if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A)
1175 pipe_config->has_pch_encoder = true;
1177 pipe_config->has_dp_encoder = true;
1178 pipe_config->has_drrs = false;
1179 pipe_config->has_audio = intel_dp->has_audio;
1181 if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
1182 intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
1184 if (!HAS_PCH_SPLIT(dev))
1185 intel_gmch_panel_fitting(intel_crtc, pipe_config,
1186 intel_connector->panel.fitting_mode);
1188 intel_pch_panel_fitting(intel_crtc, pipe_config,
1189 intel_connector->panel.fitting_mode);
1192 if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
1195 DRM_DEBUG_KMS("DP link computation with max lane count %i "
1196 "max bw %02x pixel clock %iKHz\n",
1197 max_lane_count, bws[max_clock],
1198 adjusted_mode->crtc_clock);
1200 /* Walk through all bpp values. Luckily they're all nicely spaced with 2
1201 * bpc in between. */
1202 bpp = pipe_config->pipe_bpp;
1203 if (is_edp(intel_dp)) {
1204 if (dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp) {
1205 DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n",
1206 dev_priv->vbt.edp_bpp);
1207 bpp = dev_priv->vbt.edp_bpp;
1211 * Use the maximum clock and number of lanes the eDP panel
1212 * advertizes being capable of. The panels are generally
1213 * designed to support only a single clock and lane
1214 * configuration, and typically these values correspond to the
1215 * native resolution of the panel.
1217 min_lane_count = max_lane_count;
1218 min_clock = max_clock;
1221 for (; bpp >= 6*3; bpp -= 2*3) {
1222 mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock,
1225 for (clock = min_clock; clock <= max_clock; clock++) {
1226 for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) {
1227 link_clock = drm_dp_bw_code_to_link_rate(bws[clock]);
1228 link_avail = intel_dp_max_data_rate(link_clock,
1231 if (mode_rate <= link_avail) {
1241 if (intel_dp->color_range_auto) {
1244 * CEA-861-E - 5.1 Default Encoding Parameters
1245 * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry
1247 if (bpp != 18 && drm_match_cea_mode(adjusted_mode) > 1)
1248 intel_dp->color_range = DP_COLOR_RANGE_16_235;
1250 intel_dp->color_range = 0;
1253 if (intel_dp->color_range)
1254 pipe_config->limited_color_range = true;
1256 intel_dp->link_bw = bws[clock];
1257 intel_dp->lane_count = lane_count;
1258 pipe_config->pipe_bpp = bpp;
1259 pipe_config->port_clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
1261 DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n",
1262 intel_dp->link_bw, intel_dp->lane_count,
1263 pipe_config->port_clock, bpp);
1264 DRM_DEBUG_KMS("DP link bw required %i available %i\n",
1265 mode_rate, link_avail);
1267 intel_link_compute_m_n(bpp, lane_count,
1268 adjusted_mode->crtc_clock,
1269 pipe_config->port_clock,
1270 &pipe_config->dp_m_n);
1272 if (intel_connector->panel.downclock_mode != NULL &&
1273 dev_priv->drrs.type == SEAMLESS_DRRS_SUPPORT) {
1274 pipe_config->has_drrs = true;
1275 intel_link_compute_m_n(bpp, lane_count,
1276 intel_connector->panel.downclock_mode->clock,
1277 pipe_config->port_clock,
1278 &pipe_config->dp_m2_n2);
1281 if (IS_SKYLAKE(dev) && is_edp(intel_dp))
1282 skl_edp_set_pll_config(pipe_config, intel_dp->link_bw);
1283 else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
1284 hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw);
1286 intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
1291 static void ironlake_set_pll_cpu_edp(struct intel_dp *intel_dp)
1293 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
1294 struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
1295 struct drm_device *dev = crtc->base.dev;
1296 struct drm_i915_private *dev_priv = dev->dev_private;
1299 DRM_DEBUG_KMS("eDP PLL enable for clock %d\n",
1300 crtc->config->port_clock);
1301 dpa_ctl = I915_READ(DP_A);
1302 dpa_ctl &= ~DP_PLL_FREQ_MASK;
1304 if (crtc->config->port_clock == 162000) {
1305 /* For a long time we've carried around a ILK-DevA w/a for the
1306 * 160MHz clock. If we're really unlucky, it's still required.
1308 DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
1309 dpa_ctl |= DP_PLL_FREQ_160MHZ;
1310 intel_dp->DP |= DP_PLL_FREQ_160MHZ;
1312 dpa_ctl |= DP_PLL_FREQ_270MHZ;
1313 intel_dp->DP |= DP_PLL_FREQ_270MHZ;
1316 I915_WRITE(DP_A, dpa_ctl);
1322 static void intel_dp_prepare(struct intel_encoder *encoder)
1324 struct drm_device *dev = encoder->base.dev;
1325 struct drm_i915_private *dev_priv = dev->dev_private;
1326 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
1327 enum port port = dp_to_dig_port(intel_dp)->port;
1328 struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
1329 struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
1332 * There are four kinds of DP registers:
1339 * IBX PCH and CPU are the same for almost everything,
1340 * except that the CPU DP PLL is configured in this
1343 * CPT PCH is quite different, having many bits moved
1344 * to the TRANS_DP_CTL register instead. That
1345 * configuration happens (oddly) in ironlake_pch_enable
1348 /* Preserve the BIOS-computed detected bit. This is
1349 * supposed to be read-only.
1351 intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED;
1353 /* Handle DP bits in common between all three register formats */
1354 intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
1355 intel_dp->DP |= DP_PORT_WIDTH(intel_dp->lane_count);
1357 if (crtc->config->has_audio)
1358 intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
1360 /* Split out the IBX/CPU vs CPT settings */
1362 if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
1363 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
1364 intel_dp->DP |= DP_SYNC_HS_HIGH;
1365 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
1366 intel_dp->DP |= DP_SYNC_VS_HIGH;
1367 intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
1369 if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
1370 intel_dp->DP |= DP_ENHANCED_FRAMING;
1372 intel_dp->DP |= crtc->pipe << 29;
1373 } else if (!HAS_PCH_CPT(dev) || port == PORT_A) {
1374 if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev))
1375 intel_dp->DP |= intel_dp->color_range;
1377 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
1378 intel_dp->DP |= DP_SYNC_HS_HIGH;
1379 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
1380 intel_dp->DP |= DP_SYNC_VS_HIGH;
1381 intel_dp->DP |= DP_LINK_TRAIN_OFF;
1383 if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
1384 intel_dp->DP |= DP_ENHANCED_FRAMING;
1386 if (!IS_CHERRYVIEW(dev)) {
1387 if (crtc->pipe == 1)
1388 intel_dp->DP |= DP_PIPEB_SELECT;
1390 intel_dp->DP |= DP_PIPE_SELECT_CHV(crtc->pipe);
1393 intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
1397 #define IDLE_ON_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
1398 #define IDLE_ON_VALUE (PP_ON | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE)
1400 #define IDLE_OFF_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | 0)
1401 #define IDLE_OFF_VALUE (0 | PP_SEQUENCE_NONE | 0 | 0)
1403 #define IDLE_CYCLE_MASK (PP_ON | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK)
1404 #define IDLE_CYCLE_VALUE (0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE)
1406 static void wait_panel_status(struct intel_dp *intel_dp,
1410 struct drm_device *dev = intel_dp_to_dev(intel_dp);
1411 struct drm_i915_private *dev_priv = dev->dev_private;
1412 u32 pp_stat_reg, pp_ctrl_reg;
1414 lockdep_assert_held(&dev_priv->pps_mutex);
1416 pp_stat_reg = _pp_stat_reg(intel_dp);
1417 pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
1419 DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
1421 I915_READ(pp_stat_reg),
1422 I915_READ(pp_ctrl_reg));
1424 if (_wait_for((I915_READ(pp_stat_reg) & mask) == value, 5000, 10)) {
1425 DRM_ERROR("Panel status timeout: status %08x control %08x\n",
1426 I915_READ(pp_stat_reg),
1427 I915_READ(pp_ctrl_reg));
1430 DRM_DEBUG_KMS("Wait complete\n");
1433 static void wait_panel_on(struct intel_dp *intel_dp)
1435 DRM_DEBUG_KMS("Wait for panel power on\n");
1436 wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE);
1439 static void wait_panel_off(struct intel_dp *intel_dp)
1441 DRM_DEBUG_KMS("Wait for panel power off time\n");
1442 wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE);
1445 static void wait_panel_power_cycle(struct intel_dp *intel_dp)
1447 DRM_DEBUG_KMS("Wait for panel power cycle\n");
1449 /* When we disable the VDD override bit last we have to do the manual
1451 wait_remaining_ms_from_jiffies(intel_dp->last_power_cycle,
1452 intel_dp->panel_power_cycle_delay);
1454 wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
1457 static void wait_backlight_on(struct intel_dp *intel_dp)
1459 wait_remaining_ms_from_jiffies(intel_dp->last_power_on,
1460 intel_dp->backlight_on_delay);
1463 static void edp_wait_backlight_off(struct intel_dp *intel_dp)
1465 wait_remaining_ms_from_jiffies(intel_dp->last_backlight_off,
1466 intel_dp->backlight_off_delay);
1469 /* Read the current pp_control value, unlocking the register if it
1473 static u32 ironlake_get_pp_control(struct intel_dp *intel_dp)
1475 struct drm_device *dev = intel_dp_to_dev(intel_dp);
1476 struct drm_i915_private *dev_priv = dev->dev_private;
1479 lockdep_assert_held(&dev_priv->pps_mutex);
1481 control = I915_READ(_pp_ctrl_reg(intel_dp));
1482 control &= ~PANEL_UNLOCK_MASK;
1483 control |= PANEL_UNLOCK_REGS;
1488 * Must be paired with edp_panel_vdd_off().
1489 * Must hold pps_mutex around the whole on/off sequence.
1490 * Can be nested with intel_edp_panel_vdd_{on,off}() calls.
1492 static bool edp_panel_vdd_on(struct intel_dp *intel_dp)
1494 struct drm_device *dev = intel_dp_to_dev(intel_dp);
1495 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
1496 struct intel_encoder *intel_encoder = &intel_dig_port->base;
1497 struct drm_i915_private *dev_priv = dev->dev_private;
1498 enum intel_display_power_domain power_domain;
1500 u32 pp_stat_reg, pp_ctrl_reg;
1501 bool need_to_disable = !intel_dp->want_panel_vdd;
1503 lockdep_assert_held(&dev_priv->pps_mutex);
1505 if (!is_edp(intel_dp))
1508 cancel_delayed_work(&intel_dp->panel_vdd_work);
1509 intel_dp->want_panel_vdd = true;
1511 if (edp_have_panel_vdd(intel_dp))
1512 return need_to_disable;
1514 power_domain = intel_display_port_power_domain(intel_encoder);
1515 intel_display_power_get(dev_priv, power_domain);
1517 DRM_DEBUG_KMS("Turning eDP port %c VDD on\n",
1518 port_name(intel_dig_port->port));
1520 if (!edp_have_panel_power(intel_dp))
1521 wait_panel_power_cycle(intel_dp);
1523 pp = ironlake_get_pp_control(intel_dp);
1524 pp |= EDP_FORCE_VDD;
1526 pp_stat_reg = _pp_stat_reg(intel_dp);
1527 pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
1529 I915_WRITE(pp_ctrl_reg, pp);
1530 POSTING_READ(pp_ctrl_reg);
1531 DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
1532 I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
1534 * If the panel wasn't on, delay before accessing aux channel
1536 if (!edp_have_panel_power(intel_dp)) {
1537 DRM_DEBUG_KMS("eDP port %c panel power wasn't enabled\n",
1538 port_name(intel_dig_port->port));
1539 msleep(intel_dp->panel_power_up_delay);
1542 return need_to_disable;
1546 * Must be paired with intel_edp_panel_vdd_off() or
1547 * intel_edp_panel_off().
1548 * Nested calls to these functions are not allowed since
1549 * we drop the lock. Caller must use some higher level
1550 * locking to prevent nested calls from other threads.
1552 void intel_edp_panel_vdd_on(struct intel_dp *intel_dp)
1556 if (!is_edp(intel_dp))
1560 vdd = edp_panel_vdd_on(intel_dp);
1561 pps_unlock(intel_dp);
1563 I915_STATE_WARN(!vdd, "eDP port %c VDD already requested on\n",
1564 port_name(dp_to_dig_port(intel_dp)->port));
1567 static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp)
1569 struct drm_device *dev = intel_dp_to_dev(intel_dp);
1570 struct drm_i915_private *dev_priv = dev->dev_private;
1571 struct intel_digital_port *intel_dig_port =
1572 dp_to_dig_port(intel_dp);
1573 struct intel_encoder *intel_encoder = &intel_dig_port->base;
1574 enum intel_display_power_domain power_domain;
1576 u32 pp_stat_reg, pp_ctrl_reg;
1578 lockdep_assert_held(&dev_priv->pps_mutex);
1580 WARN_ON(intel_dp->want_panel_vdd);
1582 if (!edp_have_panel_vdd(intel_dp))
1585 DRM_DEBUG_KMS("Turning eDP port %c VDD off\n",
1586 port_name(intel_dig_port->port));
1588 pp = ironlake_get_pp_control(intel_dp);
1589 pp &= ~EDP_FORCE_VDD;
1591 pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
1592 pp_stat_reg = _pp_stat_reg(intel_dp);
1594 I915_WRITE(pp_ctrl_reg, pp);
1595 POSTING_READ(pp_ctrl_reg);
1597 /* Make sure sequencer is idle before allowing subsequent activity */
1598 DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
1599 I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
1601 if ((pp & POWER_TARGET_ON) == 0)
1602 intel_dp->last_power_cycle = jiffies;
1604 power_domain = intel_display_port_power_domain(intel_encoder);
1605 intel_display_power_put(dev_priv, power_domain);
1608 static void edp_panel_vdd_work(struct work_struct *__work)
1610 struct intel_dp *intel_dp = container_of(to_delayed_work(__work),
1611 struct intel_dp, panel_vdd_work);
1614 if (!intel_dp->want_panel_vdd)
1615 edp_panel_vdd_off_sync(intel_dp);
1616 pps_unlock(intel_dp);
1619 static void edp_panel_vdd_schedule_off(struct intel_dp *intel_dp)
1621 unsigned long delay;
1624 * Queue the timer to fire a long time from now (relative to the power
1625 * down delay) to keep the panel power up across a sequence of
1628 delay = msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5);
1629 schedule_delayed_work(&intel_dp->panel_vdd_work, delay);
1633 * Must be paired with edp_panel_vdd_on().
1634 * Must hold pps_mutex around the whole on/off sequence.
1635 * Can be nested with intel_edp_panel_vdd_{on,off}() calls.
1637 static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
1639 struct drm_i915_private *dev_priv =
1640 intel_dp_to_dev(intel_dp)->dev_private;
1642 lockdep_assert_held(&dev_priv->pps_mutex);
1644 if (!is_edp(intel_dp))
1647 I915_STATE_WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on",
1648 port_name(dp_to_dig_port(intel_dp)->port));
1650 intel_dp->want_panel_vdd = false;
1653 edp_panel_vdd_off_sync(intel_dp);
1655 edp_panel_vdd_schedule_off(intel_dp);
1658 static void edp_panel_on(struct intel_dp *intel_dp)
1660 struct drm_device *dev = intel_dp_to_dev(intel_dp);
1661 struct drm_i915_private *dev_priv = dev->dev_private;
1665 lockdep_assert_held(&dev_priv->pps_mutex);
1667 if (!is_edp(intel_dp))
1670 DRM_DEBUG_KMS("Turn eDP port %c panel power on\n",
1671 port_name(dp_to_dig_port(intel_dp)->port));
1673 if (WARN(edp_have_panel_power(intel_dp),
1674 "eDP port %c panel power already on\n",
1675 port_name(dp_to_dig_port(intel_dp)->port)))
1678 wait_panel_power_cycle(intel_dp);
1680 pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
1681 pp = ironlake_get_pp_control(intel_dp);
1683 /* ILK workaround: disable reset around power sequence */
1684 pp &= ~PANEL_POWER_RESET;
1685 I915_WRITE(pp_ctrl_reg, pp);
1686 POSTING_READ(pp_ctrl_reg);
1689 pp |= POWER_TARGET_ON;
1691 pp |= PANEL_POWER_RESET;
1693 I915_WRITE(pp_ctrl_reg, pp);
1694 POSTING_READ(pp_ctrl_reg);
1696 wait_panel_on(intel_dp);
1697 intel_dp->last_power_on = jiffies;
1700 pp |= PANEL_POWER_RESET; /* restore panel reset bit */
1701 I915_WRITE(pp_ctrl_reg, pp);
1702 POSTING_READ(pp_ctrl_reg);
1706 void intel_edp_panel_on(struct intel_dp *intel_dp)
1708 if (!is_edp(intel_dp))
1712 edp_panel_on(intel_dp);
1713 pps_unlock(intel_dp);
1717 static void edp_panel_off(struct intel_dp *intel_dp)
1719 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
1720 struct intel_encoder *intel_encoder = &intel_dig_port->base;
1721 struct drm_device *dev = intel_dp_to_dev(intel_dp);
1722 struct drm_i915_private *dev_priv = dev->dev_private;
1723 enum intel_display_power_domain power_domain;
1727 lockdep_assert_held(&dev_priv->pps_mutex);
1729 if (!is_edp(intel_dp))
1732 DRM_DEBUG_KMS("Turn eDP port %c panel power off\n",
1733 port_name(dp_to_dig_port(intel_dp)->port));
1735 WARN(!intel_dp->want_panel_vdd, "Need eDP port %c VDD to turn off panel\n",
1736 port_name(dp_to_dig_port(intel_dp)->port));
1738 pp = ironlake_get_pp_control(intel_dp);
1739 /* We need to switch off panel power _and_ force vdd, for otherwise some
1740 * panels get very unhappy and cease to work. */
1741 pp &= ~(POWER_TARGET_ON | PANEL_POWER_RESET | EDP_FORCE_VDD |
1744 pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
1746 intel_dp->want_panel_vdd = false;
1748 I915_WRITE(pp_ctrl_reg, pp);
1749 POSTING_READ(pp_ctrl_reg);
1751 intel_dp->last_power_cycle = jiffies;
1752 wait_panel_off(intel_dp);
1754 /* We got a reference when we enabled the VDD. */
1755 power_domain = intel_display_port_power_domain(intel_encoder);
1756 intel_display_power_put(dev_priv, power_domain);
1759 void intel_edp_panel_off(struct intel_dp *intel_dp)
1761 if (!is_edp(intel_dp))
1765 edp_panel_off(intel_dp);
1766 pps_unlock(intel_dp);
1769 /* Enable backlight in the panel power control. */
1770 static void _intel_edp_backlight_on(struct intel_dp *intel_dp)
1772 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
1773 struct drm_device *dev = intel_dig_port->base.base.dev;
1774 struct drm_i915_private *dev_priv = dev->dev_private;
1779 * If we enable the backlight right away following a panel power
1780 * on, we may see slight flicker as the panel syncs with the eDP
1781 * link. So delay a bit to make sure the image is solid before
1782 * allowing it to appear.
1784 wait_backlight_on(intel_dp);
1788 pp = ironlake_get_pp_control(intel_dp);
1789 pp |= EDP_BLC_ENABLE;
1791 pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
1793 I915_WRITE(pp_ctrl_reg, pp);
1794 POSTING_READ(pp_ctrl_reg);
1796 pps_unlock(intel_dp);
1799 /* Enable backlight PWM and backlight PP control. */
1800 void intel_edp_backlight_on(struct intel_dp *intel_dp)
1802 if (!is_edp(intel_dp))
1805 DRM_DEBUG_KMS("\n");
1807 intel_panel_enable_backlight(intel_dp->attached_connector);
1808 _intel_edp_backlight_on(intel_dp);
1811 /* Disable backlight in the panel power control. */
1812 static void _intel_edp_backlight_off(struct intel_dp *intel_dp)
1814 struct drm_device *dev = intel_dp_to_dev(intel_dp);
1815 struct drm_i915_private *dev_priv = dev->dev_private;
1819 if (!is_edp(intel_dp))
1824 pp = ironlake_get_pp_control(intel_dp);
1825 pp &= ~EDP_BLC_ENABLE;
1827 pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
1829 I915_WRITE(pp_ctrl_reg, pp);
1830 POSTING_READ(pp_ctrl_reg);
1832 pps_unlock(intel_dp);
1834 intel_dp->last_backlight_off = jiffies;
1835 edp_wait_backlight_off(intel_dp);
1838 /* Disable backlight PP control and backlight PWM. */
1839 void intel_edp_backlight_off(struct intel_dp *intel_dp)
1841 if (!is_edp(intel_dp))
1844 DRM_DEBUG_KMS("\n");
1846 _intel_edp_backlight_off(intel_dp);
1847 intel_panel_disable_backlight(intel_dp->attached_connector);
1851 * Hook for controlling the panel power control backlight through the bl_power
1852 * sysfs attribute. Take care to handle multiple calls.
1854 static void intel_edp_backlight_power(struct intel_connector *connector,
1857 struct intel_dp *intel_dp = intel_attached_dp(&connector->base);
1861 is_enabled = ironlake_get_pp_control(intel_dp) & EDP_BLC_ENABLE;
1862 pps_unlock(intel_dp);
1864 if (is_enabled == enable)
1867 DRM_DEBUG_KMS("panel power control backlight %s\n",
1868 enable ? "enable" : "disable");
1871 _intel_edp_backlight_on(intel_dp);
1873 _intel_edp_backlight_off(intel_dp);
1876 static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
1878 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
1879 struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
1880 struct drm_device *dev = crtc->dev;
1881 struct drm_i915_private *dev_priv = dev->dev_private;
1884 assert_pipe_disabled(dev_priv,
1885 to_intel_crtc(crtc)->pipe);
1887 DRM_DEBUG_KMS("\n");
1888 dpa_ctl = I915_READ(DP_A);
1889 WARN(dpa_ctl & DP_PLL_ENABLE, "dp pll on, should be off\n");
1890 WARN(dpa_ctl & DP_PORT_EN, "dp port still on, should be off\n");
1892 /* We don't adjust intel_dp->DP while tearing down the link, to
1893 * facilitate link retraining (e.g. after hotplug). Hence clear all
1894 * enable bits here to ensure that we don't enable too much. */
1895 intel_dp->DP &= ~(DP_PORT_EN | DP_AUDIO_OUTPUT_ENABLE);
1896 intel_dp->DP |= DP_PLL_ENABLE;
1897 I915_WRITE(DP_A, intel_dp->DP);
1902 static void ironlake_edp_pll_off(struct intel_dp *intel_dp)
1904 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
1905 struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
1906 struct drm_device *dev = crtc->dev;
1907 struct drm_i915_private *dev_priv = dev->dev_private;
1910 assert_pipe_disabled(dev_priv,
1911 to_intel_crtc(crtc)->pipe);
1913 dpa_ctl = I915_READ(DP_A);
1914 WARN((dpa_ctl & DP_PLL_ENABLE) == 0,
1915 "dp pll off, should be on\n");
1916 WARN(dpa_ctl & DP_PORT_EN, "dp port still on, should be off\n");
1918 /* We can't rely on the value tracked for the DP register in
1919 * intel_dp->DP because link_down must not change that (otherwise link
1920 * re-training will fail. */
1921 dpa_ctl &= ~DP_PLL_ENABLE;
1922 I915_WRITE(DP_A, dpa_ctl);
1927 /* If the sink supports it, try to set the power state appropriately */
1928 void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
1932 /* Should have a valid DPCD by this point */
1933 if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
1936 if (mode != DRM_MODE_DPMS_ON) {
1937 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
1941 * When turning on, we need to retry for 1ms to give the sink
1944 for (i = 0; i < 3; i++) {
1945 ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
1954 DRM_DEBUG_KMS("failed to %s sink power state\n",
1955 mode == DRM_MODE_DPMS_ON ? "enable" : "disable");
1958 static bool intel_dp_get_hw_state(struct intel_encoder *encoder,
1961 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
1962 enum port port = dp_to_dig_port(intel_dp)->port;
1963 struct drm_device *dev = encoder->base.dev;
1964 struct drm_i915_private *dev_priv = dev->dev_private;
1965 enum intel_display_power_domain power_domain;
1968 power_domain = intel_display_port_power_domain(encoder);
1969 if (!intel_display_power_is_enabled(dev_priv, power_domain))
1972 tmp = I915_READ(intel_dp->output_reg);
1974 if (!(tmp & DP_PORT_EN))
1977 if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
1978 *pipe = PORT_TO_PIPE_CPT(tmp);
1979 } else if (IS_CHERRYVIEW(dev)) {
1980 *pipe = DP_PORT_TO_PIPE_CHV(tmp);
1981 } else if (!HAS_PCH_CPT(dev) || port == PORT_A) {
1982 *pipe = PORT_TO_PIPE(tmp);
1988 switch (intel_dp->output_reg) {
1990 trans_sel = TRANS_DP_PORT_SEL_B;
1993 trans_sel = TRANS_DP_PORT_SEL_C;
1996 trans_sel = TRANS_DP_PORT_SEL_D;
2002 for_each_pipe(dev_priv, i) {
2003 trans_dp = I915_READ(TRANS_DP_CTL(i));
2004 if ((trans_dp & TRANS_DP_PORT_SEL_MASK) == trans_sel) {
2010 DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n",
2011 intel_dp->output_reg);
2017 static void intel_dp_get_config(struct intel_encoder *encoder,
2018 struct intel_crtc_state *pipe_config)
2020 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
2022 struct drm_device *dev = encoder->base.dev;
2023 struct drm_i915_private *dev_priv = dev->dev_private;
2024 enum port port = dp_to_dig_port(intel_dp)->port;
2025 struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
2028 tmp = I915_READ(intel_dp->output_reg);
2029 if (tmp & DP_AUDIO_OUTPUT_ENABLE)
2030 pipe_config->has_audio = true;
2032 if ((port == PORT_A) || !HAS_PCH_CPT(dev)) {
2033 if (tmp & DP_SYNC_HS_HIGH)
2034 flags |= DRM_MODE_FLAG_PHSYNC;
2036 flags |= DRM_MODE_FLAG_NHSYNC;
2038 if (tmp & DP_SYNC_VS_HIGH)
2039 flags |= DRM_MODE_FLAG_PVSYNC;
2041 flags |= DRM_MODE_FLAG_NVSYNC;
2043 tmp = I915_READ(TRANS_DP_CTL(crtc->pipe));
2044 if (tmp & TRANS_DP_HSYNC_ACTIVE_HIGH)
2045 flags |= DRM_MODE_FLAG_PHSYNC;
2047 flags |= DRM_MODE_FLAG_NHSYNC;
2049 if (tmp & TRANS_DP_VSYNC_ACTIVE_HIGH)
2050 flags |= DRM_MODE_FLAG_PVSYNC;
2052 flags |= DRM_MODE_FLAG_NVSYNC;
2055 pipe_config->base.adjusted_mode.flags |= flags;
2057 if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev) &&
2058 tmp & DP_COLOR_RANGE_16_235)
2059 pipe_config->limited_color_range = true;
2061 pipe_config->has_dp_encoder = true;
2063 intel_dp_get_m_n(crtc, pipe_config);
2065 if (port == PORT_A) {
2066 if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_160MHZ)
2067 pipe_config->port_clock = 162000;
2069 pipe_config->port_clock = 270000;
2072 dotclock = intel_dotclock_calculate(pipe_config->port_clock,
2073 &pipe_config->dp_m_n);
2075 if (HAS_PCH_SPLIT(dev_priv->dev) && port != PORT_A)
2076 ironlake_check_encoder_dotclock(pipe_config, dotclock);
2078 pipe_config->base.adjusted_mode.crtc_clock = dotclock;
2080 if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp &&
2081 pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) {
2083 * This is a big fat ugly hack.
2085 * Some machines in UEFI boot mode provide us a VBT that has 18
2086 * bpp and 1.62 GHz link bandwidth for eDP, which for reasons
2087 * unknown we fail to light up. Yet the same BIOS boots up with
2088 * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
2089 * max, not what it tells us to use.
2091 * Note: This will still be broken if the eDP panel is not lit
2092 * up by the BIOS, and thus we can't get the mode at module
2095 DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
2096 pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp);
2097 dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp;
2101 static void intel_disable_dp(struct intel_encoder *encoder)
2103 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
2104 struct drm_device *dev = encoder->base.dev;
2105 struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
2107 if (crtc->config->has_audio)
2108 intel_audio_codec_disable(encoder);
2110 if (HAS_PSR(dev) && !HAS_DDI(dev))
2111 intel_psr_disable(intel_dp);
2113 /* Make sure the panel is off before trying to change the mode. But also
2114 * ensure that we have vdd while we switch off the panel. */
2115 intel_edp_panel_vdd_on(intel_dp);
2116 intel_edp_backlight_off(intel_dp);
2117 intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
2118 intel_edp_panel_off(intel_dp);
2120 /* disable the port before the pipe on g4x */
2121 if (INTEL_INFO(dev)->gen < 5)
2122 intel_dp_link_down(intel_dp);
2125 static void ilk_post_disable_dp(struct intel_encoder *encoder)
2127 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
2128 enum port port = dp_to_dig_port(intel_dp)->port;
2130 intel_dp_link_down(intel_dp);
2132 ironlake_edp_pll_off(intel_dp);
2135 static void vlv_post_disable_dp(struct intel_encoder *encoder)
2137 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
2139 intel_dp_link_down(intel_dp);
2142 static void chv_post_disable_dp(struct intel_encoder *encoder)
2144 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
2145 struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
2146 struct drm_device *dev = encoder->base.dev;
2147 struct drm_i915_private *dev_priv = dev->dev_private;
2148 struct intel_crtc *intel_crtc =
2149 to_intel_crtc(encoder->base.crtc);
2150 enum dpio_channel ch = vlv_dport_to_channel(dport);
2151 enum pipe pipe = intel_crtc->pipe;
2154 intel_dp_link_down(intel_dp);
2156 mutex_lock(&dev_priv->dpio_lock);
2158 /* Propagate soft reset to data lane reset */
2159 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
2160 val |= CHV_PCS_REQ_SOFTRESET_EN;
2161 vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val);
2163 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch));
2164 val |= CHV_PCS_REQ_SOFTRESET_EN;
2165 vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val);
2167 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch));
2168 val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
2169 vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val);
2171 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch));
2172 val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
2173 vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val);
2175 mutex_unlock(&dev_priv->dpio_lock);
2179 _intel_dp_set_link_train(struct intel_dp *intel_dp,
2181 uint8_t dp_train_pat)
2183 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
2184 struct drm_device *dev = intel_dig_port->base.base.dev;
2185 struct drm_i915_private *dev_priv = dev->dev_private;
2186 enum port port = intel_dig_port->port;
2189 uint32_t temp = I915_READ(DP_TP_CTL(port));
2191 if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE)
2192 temp |= DP_TP_CTL_SCRAMBLE_DISABLE;
2194 temp &= ~DP_TP_CTL_SCRAMBLE_DISABLE;
2196 temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
2197 switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
2198 case DP_TRAINING_PATTERN_DISABLE:
2199 temp |= DP_TP_CTL_LINK_TRAIN_NORMAL;
2202 case DP_TRAINING_PATTERN_1:
2203 temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
2205 case DP_TRAINING_PATTERN_2:
2206 temp |= DP_TP_CTL_LINK_TRAIN_PAT2;
2208 case DP_TRAINING_PATTERN_3:
2209 temp |= DP_TP_CTL_LINK_TRAIN_PAT3;
2212 I915_WRITE(DP_TP_CTL(port), temp);
2214 } else if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) {
2215 *DP &= ~DP_LINK_TRAIN_MASK_CPT;
2217 switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
2218 case DP_TRAINING_PATTERN_DISABLE:
2219 *DP |= DP_LINK_TRAIN_OFF_CPT;
2221 case DP_TRAINING_PATTERN_1:
2222 *DP |= DP_LINK_TRAIN_PAT_1_CPT;
2224 case DP_TRAINING_PATTERN_2:
2225 *DP |= DP_LINK_TRAIN_PAT_2_CPT;
2227 case DP_TRAINING_PATTERN_3:
2228 DRM_ERROR("DP training pattern 3 not supported\n");
2229 *DP |= DP_LINK_TRAIN_PAT_2_CPT;
2234 if (IS_CHERRYVIEW(dev))
2235 *DP &= ~DP_LINK_TRAIN_MASK_CHV;
2237 *DP &= ~DP_LINK_TRAIN_MASK;
2239 switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
2240 case DP_TRAINING_PATTERN_DISABLE:
2241 *DP |= DP_LINK_TRAIN_OFF;
2243 case DP_TRAINING_PATTERN_1:
2244 *DP |= DP_LINK_TRAIN_PAT_1;
2246 case DP_TRAINING_PATTERN_2:
2247 *DP |= DP_LINK_TRAIN_PAT_2;
2249 case DP_TRAINING_PATTERN_3:
2250 if (IS_CHERRYVIEW(dev)) {
2251 *DP |= DP_LINK_TRAIN_PAT_3_CHV;
2253 DRM_ERROR("DP training pattern 3 not supported\n");
2254 *DP |= DP_LINK_TRAIN_PAT_2;
2261 static void intel_dp_enable_port(struct intel_dp *intel_dp)
2263 struct drm_device *dev = intel_dp_to_dev(intel_dp);
2264 struct drm_i915_private *dev_priv = dev->dev_private;
2266 /* enable with pattern 1 (as per spec) */
2267 _intel_dp_set_link_train(intel_dp, &intel_dp->DP,
2268 DP_TRAINING_PATTERN_1);
2270 I915_WRITE(intel_dp->output_reg, intel_dp->DP);
2271 POSTING_READ(intel_dp->output_reg);
2274 * Magic for VLV/CHV. We _must_ first set up the register
2275 * without actually enabling the port, and then do another
2276 * write to enable the port. Otherwise link training will
2277 * fail when the power sequencer is freshly used for this port.
2279 intel_dp->DP |= DP_PORT_EN;
2281 I915_WRITE(intel_dp->output_reg, intel_dp->DP);
2282 POSTING_READ(intel_dp->output_reg);
2285 static void intel_enable_dp(struct intel_encoder *encoder)
2287 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
2288 struct drm_device *dev = encoder->base.dev;
2289 struct drm_i915_private *dev_priv = dev->dev_private;
2290 struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
2291 uint32_t dp_reg = I915_READ(intel_dp->output_reg);
2293 if (WARN_ON(dp_reg & DP_PORT_EN))
2298 if (IS_VALLEYVIEW(dev))
2299 vlv_init_panel_power_sequencer(intel_dp);
2301 intel_dp_enable_port(intel_dp);
2303 edp_panel_vdd_on(intel_dp);
2304 edp_panel_on(intel_dp);
2305 edp_panel_vdd_off(intel_dp, true);
2307 pps_unlock(intel_dp);
2309 if (IS_VALLEYVIEW(dev))
2310 vlv_wait_port_ready(dev_priv, dp_to_dig_port(intel_dp));
2312 intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
2313 intel_dp_start_link_train(intel_dp);
2314 intel_dp_complete_link_train(intel_dp);
2315 intel_dp_stop_link_train(intel_dp);
2317 if (crtc->config->has_audio) {
2318 DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
2319 pipe_name(crtc->pipe));
2320 intel_audio_codec_enable(encoder);
2324 static void g4x_enable_dp(struct intel_encoder *encoder)
2326 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
2328 intel_enable_dp(encoder);
2329 intel_edp_backlight_on(intel_dp);
2332 static void vlv_enable_dp(struct intel_encoder *encoder)
2334 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
2336 intel_edp_backlight_on(intel_dp);
2337 intel_psr_enable(intel_dp);
2340 static void g4x_pre_enable_dp(struct intel_encoder *encoder)
2342 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
2343 struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
2345 intel_dp_prepare(encoder);
2347 /* Only ilk+ has port A */
2348 if (dport->port == PORT_A) {
2349 ironlake_set_pll_cpu_edp(intel_dp);
2350 ironlake_edp_pll_on(intel_dp);
2354 static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
2356 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
2357 struct drm_i915_private *dev_priv = intel_dig_port->base.base.dev->dev_private;
2358 enum pipe pipe = intel_dp->pps_pipe;
2359 int pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
2361 edp_panel_vdd_off_sync(intel_dp);
2364 * VLV seems to get confused when multiple power seqeuencers
2365 * have the same port selected (even if only one has power/vdd
2366 * enabled). The failure manifests as vlv_wait_port_ready() failing
2367 * CHV on the other hand doesn't seem to mind having the same port
2368 * selected in multiple power seqeuencers, but let's clear the
2369 * port select always when logically disconnecting a power sequencer
2372 DRM_DEBUG_KMS("detaching pipe %c power sequencer from port %c\n",
2373 pipe_name(pipe), port_name(intel_dig_port->port));
2374 I915_WRITE(pp_on_reg, 0);
2375 POSTING_READ(pp_on_reg);
2377 intel_dp->pps_pipe = INVALID_PIPE;
2380 static void vlv_steal_power_sequencer(struct drm_device *dev,
2383 struct drm_i915_private *dev_priv = dev->dev_private;
2384 struct intel_encoder *encoder;
2386 lockdep_assert_held(&dev_priv->pps_mutex);
2388 if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B))
2391 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
2393 struct intel_dp *intel_dp;
2396 if (encoder->type != INTEL_OUTPUT_EDP)
2399 intel_dp = enc_to_intel_dp(&encoder->base);
2400 port = dp_to_dig_port(intel_dp)->port;
2402 if (intel_dp->pps_pipe != pipe)
2405 DRM_DEBUG_KMS("stealing pipe %c power sequencer from port %c\n",
2406 pipe_name(pipe), port_name(port));
2408 WARN(encoder->connectors_active,
2409 "stealing pipe %c power sequencer from active eDP port %c\n",
2410 pipe_name(pipe), port_name(port));
2412 /* make sure vdd is off before we steal it */
2413 vlv_detach_power_sequencer(intel_dp);
2417 static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp)
2419 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
2420 struct intel_encoder *encoder = &intel_dig_port->base;
2421 struct drm_device *dev = encoder->base.dev;
2422 struct drm_i915_private *dev_priv = dev->dev_private;
2423 struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
2425 lockdep_assert_held(&dev_priv->pps_mutex);
2427 if (!is_edp(intel_dp))
2430 if (intel_dp->pps_pipe == crtc->pipe)
2434 * If another power sequencer was being used on this
2435 * port previously make sure to turn off vdd there while
2436 * we still have control of it.
2438 if (intel_dp->pps_pipe != INVALID_PIPE)
2439 vlv_detach_power_sequencer(intel_dp);
2442 * We may be stealing the power
2443 * sequencer from another port.
2445 vlv_steal_power_sequencer(dev, crtc->pipe);
2447 /* now it's all ours */
2448 intel_dp->pps_pipe = crtc->pipe;
2450 DRM_DEBUG_KMS("initializing pipe %c power sequencer for port %c\n",
2451 pipe_name(intel_dp->pps_pipe), port_name(intel_dig_port->port));
2453 /* init power sequencer on this pipe and port */
2454 intel_dp_init_panel_power_sequencer(dev, intel_dp);
2455 intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
2458 static void vlv_pre_enable_dp(struct intel_encoder *encoder)
2460 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
2461 struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
2462 struct drm_device *dev = encoder->base.dev;
2463 struct drm_i915_private *dev_priv = dev->dev_private;
2464 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
2465 enum dpio_channel port = vlv_dport_to_channel(dport);
2466 int pipe = intel_crtc->pipe;
2469 mutex_lock(&dev_priv->dpio_lock);
2471 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(port));
2478 vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW8(port), val);
2479 vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018);
2480 vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
2482 mutex_unlock(&dev_priv->dpio_lock);
2484 intel_enable_dp(encoder);
2487 static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder)
2489 struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
2490 struct drm_device *dev = encoder->base.dev;
2491 struct drm_i915_private *dev_priv = dev->dev_private;
2492 struct intel_crtc *intel_crtc =
2493 to_intel_crtc(encoder->base.crtc);
2494 enum dpio_channel port = vlv_dport_to_channel(dport);
2495 int pipe = intel_crtc->pipe;
2497 intel_dp_prepare(encoder);
2499 /* Program Tx lane resets to default */
2500 mutex_lock(&dev_priv->dpio_lock);
2501 vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
2502 DPIO_PCS_TX_LANE2_RESET |
2503 DPIO_PCS_TX_LANE1_RESET);
2504 vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port),
2505 DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
2506 DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
2507 (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
2508 DPIO_PCS_CLK_SOFT_RESET);
2510 /* Fix up inter-pair skew failure */
2511 vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
2512 vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
2513 vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
2514 mutex_unlock(&dev_priv->dpio_lock);
2517 static void chv_pre_enable_dp(struct intel_encoder *encoder)
2519 struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
2520 struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
2521 struct drm_device *dev = encoder->base.dev;
2522 struct drm_i915_private *dev_priv = dev->dev_private;
2523 struct intel_crtc *intel_crtc =
2524 to_intel_crtc(encoder->base.crtc);
2525 enum dpio_channel ch = vlv_dport_to_channel(dport);
2526 int pipe = intel_crtc->pipe;
2530 mutex_lock(&dev_priv->dpio_lock);
2532 /* allow hardware to manage TX FIFO reset source */
2533 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
2534 val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
2535 vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
2537 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
2538 val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
2539 vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
2541 /* Deassert soft data lane reset*/
2542 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
2543 val |= CHV_PCS_REQ_SOFTRESET_EN;
2544 vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val);
2546 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch));
2547 val |= CHV_PCS_REQ_SOFTRESET_EN;
2548 vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val);
2550 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch));
2551 val |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
2552 vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val);
2554 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch));
2555 val |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
2556 vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val);
2558 /* Program Tx lane latency optimal setting*/
2559 for (i = 0; i < 4; i++) {
2560 /* Set the latency optimal bit */
2561 data = (i == 1) ? 0x0 : 0x6;
2562 vlv_dpio_write(dev_priv, pipe, CHV_TX_DW11(ch, i),
2563 data << DPIO_FRC_LATENCY_SHFIT);
2565 /* Set the upar bit */
2566 data = (i == 1) ? 0x0 : 0x1;
2567 vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),
2568 data << DPIO_UPAR_SHIFT);
2571 /* Data lane stagger programming */
2572 /* FIXME: Fix up value only after power analysis */
2574 mutex_unlock(&dev_priv->dpio_lock);
2576 intel_enable_dp(encoder);
2579 static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
2581 struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
2582 struct drm_device *dev = encoder->base.dev;
2583 struct drm_i915_private *dev_priv = dev->dev_private;
2584 struct intel_crtc *intel_crtc =
2585 to_intel_crtc(encoder->base.crtc);
2586 enum dpio_channel ch = vlv_dport_to_channel(dport);
2587 enum pipe pipe = intel_crtc->pipe;
2590 intel_dp_prepare(encoder);
2592 mutex_lock(&dev_priv->dpio_lock);
2594 /* program left/right clock distribution */
2595 if (pipe != PIPE_B) {
2596 val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
2597 val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
2599 val |= CHV_BUFLEFTENA1_FORCE;
2601 val |= CHV_BUFRIGHTENA1_FORCE;
2602 vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
2604 val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
2605 val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
2607 val |= CHV_BUFLEFTENA2_FORCE;
2609 val |= CHV_BUFRIGHTENA2_FORCE;
2610 vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
2613 /* program clock channel usage */
2614 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch));
2615 val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
2617 val &= ~CHV_PCS_USEDCLKCHANNEL;
2619 val |= CHV_PCS_USEDCLKCHANNEL;
2620 vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);
2622 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
2623 val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
2625 val &= ~CHV_PCS_USEDCLKCHANNEL;
2627 val |= CHV_PCS_USEDCLKCHANNEL;
2628 vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
2631 * This a a bit weird since generally CL
2632 * matches the pipe, but here we need to
2633 * pick the CL based on the port.
2635 val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch));
2637 val &= ~CHV_CMN_USEDCLKCHANNEL;
2639 val |= CHV_CMN_USEDCLKCHANNEL;
2640 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
2642 mutex_unlock(&dev_priv->dpio_lock);
2646 * Native read with retry for link status and receiver capability reads for
2647 * cases where the sink may still be asleep.
2649 * Sinks are *supposed* to come up within 1ms from an off state, but we're also
2650 * supposed to retry 3 times per the spec.
2653 intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset,
2654 void *buffer, size_t size)
2660 * Sometime we just get the same incorrect byte repeated
2661 * over the entire buffer. Doing just one throw away read
2662 * initially seems to "solve" it.
2664 drm_dp_dpcd_read(aux, DP_DPCD_REV, buffer, 1);
2666 for (i = 0; i < 3; i++) {
2667 ret = drm_dp_dpcd_read(aux, offset, buffer, size);
2677 * Fetch AUX CH registers 0x202 - 0x207 which contain
2678 * link status information
2681 intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
2683 return intel_dp_dpcd_read_wake(&intel_dp->aux,
2686 DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE;
2689 /* These are source-specific values. */
2691 intel_dp_voltage_max(struct intel_dp *intel_dp)
2693 struct drm_device *dev = intel_dp_to_dev(intel_dp);
2694 enum port port = dp_to_dig_port(intel_dp)->port;
2696 if (INTEL_INFO(dev)->gen >= 9)
2697 return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
2698 else if (IS_VALLEYVIEW(dev))
2699 return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
2700 else if (IS_GEN7(dev) && port == PORT_A)
2701 return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
2702 else if (HAS_PCH_CPT(dev) && port != PORT_A)
2703 return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
2705 return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
2709 intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
2711 struct drm_device *dev = intel_dp_to_dev(intel_dp);
2712 enum port port = dp_to_dig_port(intel_dp)->port;
2714 if (INTEL_INFO(dev)->gen >= 9) {
2715 switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
2716 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2717 return DP_TRAIN_PRE_EMPH_LEVEL_3;
2718 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
2719 return DP_TRAIN_PRE_EMPH_LEVEL_2;
2720 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
2721 return DP_TRAIN_PRE_EMPH_LEVEL_1;
2723 return DP_TRAIN_PRE_EMPH_LEVEL_0;
2725 } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
2726 switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
2727 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2728 return DP_TRAIN_PRE_EMPH_LEVEL_3;
2729 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
2730 return DP_TRAIN_PRE_EMPH_LEVEL_2;
2731 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
2732 return DP_TRAIN_PRE_EMPH_LEVEL_1;
2733 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
2735 return DP_TRAIN_PRE_EMPH_LEVEL_0;
2737 } else if (IS_VALLEYVIEW(dev)) {
2738 switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
2739 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2740 return DP_TRAIN_PRE_EMPH_LEVEL_3;
2741 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
2742 return DP_TRAIN_PRE_EMPH_LEVEL_2;
2743 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
2744 return DP_TRAIN_PRE_EMPH_LEVEL_1;
2745 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
2747 return DP_TRAIN_PRE_EMPH_LEVEL_0;
2749 } else if (IS_GEN7(dev) && port == PORT_A) {
2750 switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
2751 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2752 return DP_TRAIN_PRE_EMPH_LEVEL_2;
2753 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
2754 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
2755 return DP_TRAIN_PRE_EMPH_LEVEL_1;
2757 return DP_TRAIN_PRE_EMPH_LEVEL_0;
2760 switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
2761 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2762 return DP_TRAIN_PRE_EMPH_LEVEL_2;
2763 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
2764 return DP_TRAIN_PRE_EMPH_LEVEL_2;
2765 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
2766 return DP_TRAIN_PRE_EMPH_LEVEL_1;
2767 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
2769 return DP_TRAIN_PRE_EMPH_LEVEL_0;
2774 static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp)
2776 struct drm_device *dev = intel_dp_to_dev(intel_dp);
2777 struct drm_i915_private *dev_priv = dev->dev_private;
2778 struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
2779 struct intel_crtc *intel_crtc =
2780 to_intel_crtc(dport->base.base.crtc);
2781 unsigned long demph_reg_value, preemph_reg_value,
2782 uniqtranscale_reg_value;
2783 uint8_t train_set = intel_dp->train_set[0];
2784 enum dpio_channel port = vlv_dport_to_channel(dport);
2785 int pipe = intel_crtc->pipe;
2787 switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
2788 case DP_TRAIN_PRE_EMPH_LEVEL_0:
2789 preemph_reg_value = 0x0004000;
2790 switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
2791 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2792 demph_reg_value = 0x2B405555;
2793 uniqtranscale_reg_value = 0x552AB83A;
2795 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
2796 demph_reg_value = 0x2B404040;
2797 uniqtranscale_reg_value = 0x5548B83A;
2799 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
2800 demph_reg_value = 0x2B245555;
2801 uniqtranscale_reg_value = 0x5560B83A;
2803 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
2804 demph_reg_value = 0x2B405555;
2805 uniqtranscale_reg_value = 0x5598DA3A;
2811 case DP_TRAIN_PRE_EMPH_LEVEL_1:
2812 preemph_reg_value = 0x0002000;
2813 switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
2814 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2815 demph_reg_value = 0x2B404040;
2816 uniqtranscale_reg_value = 0x5552B83A;
2818 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
2819 demph_reg_value = 0x2B404848;
2820 uniqtranscale_reg_value = 0x5580B83A;
2822 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
2823 demph_reg_value = 0x2B404040;
2824 uniqtranscale_reg_value = 0x55ADDA3A;
2830 case DP_TRAIN_PRE_EMPH_LEVEL_2:
2831 preemph_reg_value = 0x0000000;
2832 switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
2833 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2834 demph_reg_value = 0x2B305555;
2835 uniqtranscale_reg_value = 0x5570B83A;
2837 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
2838 demph_reg_value = 0x2B2B4040;
2839 uniqtranscale_reg_value = 0x55ADDA3A;
2845 case DP_TRAIN_PRE_EMPH_LEVEL_3:
2846 preemph_reg_value = 0x0006000;
2847 switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
2848 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2849 demph_reg_value = 0x1B405555;
2850 uniqtranscale_reg_value = 0x55ADDA3A;
2860 mutex_lock(&dev_priv->dpio_lock);
2861 vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x00000000);
2862 vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), demph_reg_value);
2863 vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port),
2864 uniqtranscale_reg_value);
2865 vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0C782040);
2866 vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
2867 vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), preemph_reg_value);
2868 vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x80000000);
2869 mutex_unlock(&dev_priv->dpio_lock);
2874 static uint32_t intel_chv_signal_levels(struct intel_dp *intel_dp)
2876 struct drm_device *dev = intel_dp_to_dev(intel_dp);
2877 struct drm_i915_private *dev_priv = dev->dev_private;
2878 struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
2879 struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc);
2880 u32 deemph_reg_value, margin_reg_value, val;
2881 uint8_t train_set = intel_dp->train_set[0];
2882 enum dpio_channel ch = vlv_dport_to_channel(dport);
2883 enum pipe pipe = intel_crtc->pipe;
2886 switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
2887 case DP_TRAIN_PRE_EMPH_LEVEL_0:
2888 switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
2889 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2890 deemph_reg_value = 128;
2891 margin_reg_value = 52;
2893 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
2894 deemph_reg_value = 128;
2895 margin_reg_value = 77;
2897 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
2898 deemph_reg_value = 128;
2899 margin_reg_value = 102;
2901 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
2902 deemph_reg_value = 128;
2903 margin_reg_value = 154;
2904 /* FIXME extra to set for 1200 */
2910 case DP_TRAIN_PRE_EMPH_LEVEL_1:
2911 switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
2912 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2913 deemph_reg_value = 85;
2914 margin_reg_value = 78;
2916 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
2917 deemph_reg_value = 85;
2918 margin_reg_value = 116;
2920 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
2921 deemph_reg_value = 85;
2922 margin_reg_value = 154;
2928 case DP_TRAIN_PRE_EMPH_LEVEL_2:
2929 switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
2930 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2931 deemph_reg_value = 64;
2932 margin_reg_value = 104;
2934 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
2935 deemph_reg_value = 64;
2936 margin_reg_value = 154;
2942 case DP_TRAIN_PRE_EMPH_LEVEL_3:
2943 switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
2944 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
2945 deemph_reg_value = 43;
2946 margin_reg_value = 154;
2956 mutex_lock(&dev_priv->dpio_lock);
2958 /* Clear calc init */
2959 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
2960 val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
2961 val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
2962 val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
2963 vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
2965 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
2966 val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
2967 val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
2968 val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
2969 vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
2971 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
2972 val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
2973 val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
2974 vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
2976 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
2977 val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
2978 val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
2979 vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
2981 /* Program swing deemph */
2982 for (i = 0; i < 4; i++) {
2983 val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
2984 val &= ~DPIO_SWING_DEEMPH9P5_MASK;
2985 val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT;
2986 vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
2989 /* Program swing margin */
2990 for (i = 0; i < 4; i++) {
2991 val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
2992 val &= ~DPIO_SWING_MARGIN000_MASK;
2993 val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
2994 vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
2997 /* Disable unique transition scale */
2998 for (i = 0; i < 4; i++) {
2999 val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
3000 val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
3001 vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
3004 if (((train_set & DP_TRAIN_PRE_EMPHASIS_MASK)
3005 == DP_TRAIN_PRE_EMPH_LEVEL_0) &&
3006 ((train_set & DP_TRAIN_VOLTAGE_SWING_MASK)
3007 == DP_TRAIN_VOLTAGE_SWING_LEVEL_3)) {
3010 * The document said it needs to set bit 27 for ch0 and bit 26
3011 * for ch1. Might be a typo in the doc.
3012 * For now, for this unique transition scale selection, set bit
3013 * 27 for ch0 and ch1.
3015 for (i = 0; i < 4; i++) {
3016 val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
3017 val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;
3018 vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
3021 for (i = 0; i < 4; i++) {
3022 val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
3023 val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
3024 val |= (0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT);
3025 vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
3029 /* Start swing calculation */
3030 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
3031 val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
3032 vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
3034 val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
3035 val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
3036 vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
3039 val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30);
3040 val |= DPIO_LRC_BYPASS;
3041 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, val);
3043 mutex_unlock(&dev_priv->dpio_lock);
3049 intel_get_adjust_train(struct intel_dp *intel_dp,
3050 const uint8_t link_status[DP_LINK_STATUS_SIZE])
3055 uint8_t voltage_max;
3056 uint8_t preemph_max;
3058 for (lane = 0; lane < intel_dp->lane_count; lane++) {
3059 uint8_t this_v = drm_dp_get_adjust_request_voltage(link_status, lane);
3060 uint8_t this_p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane);
3068 voltage_max = intel_dp_voltage_max(intel_dp);
3069 if (v >= voltage_max)
3070 v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
3072 preemph_max = intel_dp_pre_emphasis_max(intel_dp, v);
3073 if (p >= preemph_max)
3074 p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
3076 for (lane = 0; lane < 4; lane++)
3077 intel_dp->train_set[lane] = v | p;
3081 intel_gen4_signal_levels(uint8_t train_set)
3083 uint32_t signal_levels = 0;
3085 switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
3086 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
3088 signal_levels |= DP_VOLTAGE_0_4;
3090 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
3091 signal_levels |= DP_VOLTAGE_0_6;
3093 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
3094 signal_levels |= DP_VOLTAGE_0_8;
3096 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
3097 signal_levels |= DP_VOLTAGE_1_2;
3100 switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
3101 case DP_TRAIN_PRE_EMPH_LEVEL_0:
3103 signal_levels |= DP_PRE_EMPHASIS_0;
3105 case DP_TRAIN_PRE_EMPH_LEVEL_1:
3106 signal_levels |= DP_PRE_EMPHASIS_3_5;
3108 case DP_TRAIN_PRE_EMPH_LEVEL_2:
3109 signal_levels |= DP_PRE_EMPHASIS_6;
3111 case DP_TRAIN_PRE_EMPH_LEVEL_3:
3112 signal_levels |= DP_PRE_EMPHASIS_9_5;
3115 return signal_levels;
3118 /* Gen6's DP voltage swing and pre-emphasis control */
3120 intel_gen6_edp_signal_levels(uint8_t train_set)
3122 int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
3123 DP_TRAIN_PRE_EMPHASIS_MASK);
3124 switch (signal_levels) {
3125 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
3126 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
3127 return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
3128 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1:
3129 return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B;
3130 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2:
3131 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2:
3132 return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B;
3133 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1:
3134 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1:
3135 return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B;
3136 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0:
3137 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0:
3138 return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B;
3140 DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
3141 "0x%x\n", signal_levels);
3142 return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
3146 /* Gen7's DP voltage swing and pre-emphasis control */
3148 intel_gen7_edp_signal_levels(uint8_t train_set)
3150 int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
3151 DP_TRAIN_PRE_EMPHASIS_MASK);
3152 switch (signal_levels) {
3153 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
3154 return EDP_LINK_TRAIN_400MV_0DB_IVB;
3155 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1:
3156 return EDP_LINK_TRAIN_400MV_3_5DB_IVB;
3157 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2:
3158 return EDP_LINK_TRAIN_400MV_6DB_IVB;
3160 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
3161 return EDP_LINK_TRAIN_600MV_0DB_IVB;
3162 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1:
3163 return EDP_LINK_TRAIN_600MV_3_5DB_IVB;
3165 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0:
3166 return EDP_LINK_TRAIN_800MV_0DB_IVB;
3167 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1:
3168 return EDP_LINK_TRAIN_800MV_3_5DB_IVB;
3171 DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
3172 "0x%x\n", signal_levels);
3173 return EDP_LINK_TRAIN_500MV_0DB_IVB;
3177 /* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */
3179 intel_hsw_signal_levels(uint8_t train_set)
3181 int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
3182 DP_TRAIN_PRE_EMPHASIS_MASK);
3183 switch (signal_levels) {
3184 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
3185 return DDI_BUF_TRANS_SELECT(0);
3186 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1:
3187 return DDI_BUF_TRANS_SELECT(1);
3188 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2:
3189 return DDI_BUF_TRANS_SELECT(2);
3190 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3:
3191 return DDI_BUF_TRANS_SELECT(3);
3193 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
3194 return DDI_BUF_TRANS_SELECT(4);
3195 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1:
3196 return DDI_BUF_TRANS_SELECT(5);
3197 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2:
3198 return DDI_BUF_TRANS_SELECT(6);
3200 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0:
3201 return DDI_BUF_TRANS_SELECT(7);
3202 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1:
3203 return DDI_BUF_TRANS_SELECT(8);
3205 DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
3206 "0x%x\n", signal_levels);
3207 return DDI_BUF_TRANS_SELECT(0);
3211 /* Properly updates "DP" with the correct signal levels. */
3213 intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
3215 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
3216 enum port port = intel_dig_port->port;
3217 struct drm_device *dev = intel_dig_port->base.base.dev;
3218 uint32_t signal_levels, mask;
3219 uint8_t train_set = intel_dp->train_set[0];
3221 if (IS_HASWELL(dev) || IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) {
3222 signal_levels = intel_hsw_signal_levels(train_set);
3223 mask = DDI_BUF_EMP_MASK;
3224 } else if (IS_CHERRYVIEW(dev)) {
3225 signal_levels = intel_chv_signal_levels(intel_dp);
3227 } else if (IS_VALLEYVIEW(dev)) {
3228 signal_levels = intel_vlv_signal_levels(intel_dp);
3230 } else if (IS_GEN7(dev) && port == PORT_A) {
3231 signal_levels = intel_gen7_edp_signal_levels(train_set);
3232 mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
3233 } else if (IS_GEN6(dev) && port == PORT_A) {
3234 signal_levels = intel_gen6_edp_signal_levels(train_set);
3235 mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB;
3237 signal_levels = intel_gen4_signal_levels(train_set);
3238 mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK;
3241 DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels);
3243 *DP = (*DP & ~mask) | signal_levels;
3247 intel_dp_set_link_train(struct intel_dp *intel_dp,
3249 uint8_t dp_train_pat)
3251 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
3252 struct drm_device *dev = intel_dig_port->base.base.dev;
3253 struct drm_i915_private *dev_priv = dev->dev_private;
3254 uint8_t buf[sizeof(intel_dp->train_set) + 1];
3257 _intel_dp_set_link_train(intel_dp, DP, dp_train_pat);
3259 I915_WRITE(intel_dp->output_reg, *DP);
3260 POSTING_READ(intel_dp->output_reg);
3262 buf[0] = dp_train_pat;
3263 if ((dp_train_pat & DP_TRAINING_PATTERN_MASK) ==
3264 DP_TRAINING_PATTERN_DISABLE) {
3265 /* don't write DP_TRAINING_LANEx_SET on disable */
3268 /* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */
3269 memcpy(buf + 1, intel_dp->train_set, intel_dp->lane_count);
3270 len = intel_dp->lane_count + 1;
3273 ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_PATTERN_SET,
3280 intel_dp_reset_link_train(struct intel_dp *intel_dp, uint32_t *DP,
3281 uint8_t dp_train_pat)
3283 memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
3284 intel_dp_set_signal_levels(intel_dp, DP);
3285 return intel_dp_set_link_train(intel_dp, DP, dp_train_pat);
3289 intel_dp_update_link_train(struct intel_dp *intel_dp, uint32_t *DP,
3290 const uint8_t link_status[DP_LINK_STATUS_SIZE])
3292 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
3293 struct drm_device *dev = intel_dig_port->base.base.dev;
3294 struct drm_i915_private *dev_priv = dev->dev_private;
3297 intel_get_adjust_train(intel_dp, link_status);
3298 intel_dp_set_signal_levels(intel_dp, DP);
3300 I915_WRITE(intel_dp->output_reg, *DP);
3301 POSTING_READ(intel_dp->output_reg);
3303 ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET,
3304 intel_dp->train_set, intel_dp->lane_count);
3306 return ret == intel_dp->lane_count;
3309 static void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
3311 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
3312 struct drm_device *dev = intel_dig_port->base.base.dev;
3313 struct drm_i915_private *dev_priv = dev->dev_private;
3314 enum port port = intel_dig_port->port;
3320 val = I915_READ(DP_TP_CTL(port));
3321 val &= ~DP_TP_CTL_LINK_TRAIN_MASK;
3322 val |= DP_TP_CTL_LINK_TRAIN_IDLE;
3323 I915_WRITE(DP_TP_CTL(port), val);
3326 * On PORT_A we can have only eDP in SST mode. There the only reason
3327 * we need to set idle transmission mode is to work around a HW issue
3328 * where we enable the pipe while not in idle link-training mode.
3329 * In this case there is requirement to wait for a minimum number of
3330 * idle patterns to be sent.
3335 if (wait_for((I915_READ(DP_TP_STATUS(port)) & DP_TP_STATUS_IDLE_DONE),
3337 DRM_ERROR("Timed out waiting for DP idle patterns\n");
3340 /* Enable corresponding port and start training pattern 1 */
3342 intel_dp_start_link_train(struct intel_dp *intel_dp)
3344 struct drm_encoder *encoder = &dp_to_dig_port(intel_dp)->base.base;
3345 struct drm_device *dev = encoder->dev;
3348 int voltage_tries, loop_tries;
3349 uint32_t DP = intel_dp->DP;
3350 uint8_t link_config[2];
3353 intel_ddi_prepare_link_retrain(encoder);
3355 /* Write the link configuration data */
3356 link_config[0] = intel_dp->link_bw;
3357 link_config[1] = intel_dp->lane_count;
3358 if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
3359 link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
3360 drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
3363 link_config[1] = DP_SET_ANSI_8B10B;
3364 drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2);
3368 /* clock recovery */
3369 if (!intel_dp_reset_link_train(intel_dp, &DP,
3370 DP_TRAINING_PATTERN_1 |
3371 DP_LINK_SCRAMBLING_DISABLE)) {
3372 DRM_ERROR("failed to enable link training\n");
3380 uint8_t link_status[DP_LINK_STATUS_SIZE];
3382 drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd);
3383 if (!intel_dp_get_link_status(intel_dp, link_status)) {
3384 DRM_ERROR("failed to get link status\n");
3388 if (drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
3389 DRM_DEBUG_KMS("clock recovery OK\n");
3393 /* Check to see if we've tried the max voltage */
3394 for (i = 0; i < intel_dp->lane_count; i++)
3395 if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
3397 if (i == intel_dp->lane_count) {
3399 if (loop_tries == 5) {
3400 DRM_ERROR("too many full retries, give up\n");
3403 intel_dp_reset_link_train(intel_dp, &DP,
3404 DP_TRAINING_PATTERN_1 |
3405 DP_LINK_SCRAMBLING_DISABLE);
3410 /* Check to see if we've tried the same voltage 5 times */
3411 if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
3413 if (voltage_tries == 5) {
3414 DRM_ERROR("too many voltage retries, give up\n");
3419 voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
3421 /* Update training set as requested by target */
3422 if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) {
3423 DRM_ERROR("failed to update link training\n");
3432 intel_dp_complete_link_train(struct intel_dp *intel_dp)
3434 bool channel_eq = false;
3435 int tries, cr_tries;
3436 uint32_t DP = intel_dp->DP;
3437 uint32_t training_pattern = DP_TRAINING_PATTERN_2;
3439 /* Training Pattern 3 for HBR2 ot 1.2 devices that support it*/
3440 if (intel_dp->link_bw == DP_LINK_BW_5_4 || intel_dp->use_tps3)
3441 training_pattern = DP_TRAINING_PATTERN_3;
3443 /* channel equalization */
3444 if (!intel_dp_set_link_train(intel_dp, &DP,
3446 DP_LINK_SCRAMBLING_DISABLE)) {
3447 DRM_ERROR("failed to start channel equalization\n");
3455 uint8_t link_status[DP_LINK_STATUS_SIZE];
3458 DRM_ERROR("failed to train DP, aborting\n");
3462 drm_dp_link_train_channel_eq_delay(intel_dp->dpcd);
3463 if (!intel_dp_get_link_status(intel_dp, link_status)) {
3464 DRM_ERROR("failed to get link status\n");
3468 /* Make sure clock is still ok */
3469 if (!drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
3470 intel_dp_start_link_train(intel_dp);
3471 intel_dp_set_link_train(intel_dp, &DP,
3473 DP_LINK_SCRAMBLING_DISABLE);
3478 if (drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
3483 /* Try 5 times, then try clock recovery if that fails */
3485 intel_dp_start_link_train(intel_dp);
3486 intel_dp_set_link_train(intel_dp, &DP,
3488 DP_LINK_SCRAMBLING_DISABLE);
3494 /* Update training set as requested by target */
3495 if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) {
3496 DRM_ERROR("failed to update link training\n");
3502 intel_dp_set_idle_link_train(intel_dp);
3507 DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n");
3511 void intel_dp_stop_link_train(struct intel_dp *intel_dp)
3513 intel_dp_set_link_train(intel_dp, &intel_dp->DP,
3514 DP_TRAINING_PATTERN_DISABLE);
3518 intel_dp_link_down(struct intel_dp *intel_dp)
3520 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
3521 enum port port = intel_dig_port->port;
3522 struct drm_device *dev = intel_dig_port->base.base.dev;
3523 struct drm_i915_private *dev_priv = dev->dev_private;
3524 uint32_t DP = intel_dp->DP;
3526 if (WARN_ON(HAS_DDI(dev)))
3529 if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0))
3532 DRM_DEBUG_KMS("\n");
3534 if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) {
3535 DP &= ~DP_LINK_TRAIN_MASK_CPT;
3536 I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT);
3538 if (IS_CHERRYVIEW(dev))
3539 DP &= ~DP_LINK_TRAIN_MASK_CHV;
3541 DP &= ~DP_LINK_TRAIN_MASK;
3542 I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
3544 POSTING_READ(intel_dp->output_reg);
3546 if (HAS_PCH_IBX(dev) &&
3547 I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
3548 /* Hardware workaround: leaving our transcoder select
3549 * set to transcoder B while it's off will prevent the
3550 * corresponding HDMI output on transcoder A.
3552 * Combine this with another hardware workaround:
3553 * transcoder select bit can only be cleared while the
3556 DP &= ~DP_PIPEB_SELECT;
3557 I915_WRITE(intel_dp->output_reg, DP);
3558 POSTING_READ(intel_dp->output_reg);
3561 DP &= ~DP_AUDIO_OUTPUT_ENABLE;
3562 I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
3563 POSTING_READ(intel_dp->output_reg);
3564 msleep(intel_dp->panel_power_down_delay);
3568 intel_dp_get_dpcd(struct intel_dp *intel_dp)
3570 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
3571 struct drm_device *dev = dig_port->base.base.dev;
3572 struct drm_i915_private *dev_priv = dev->dev_private;
3574 if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd,
3575 sizeof(intel_dp->dpcd)) < 0)
3576 return false; /* aux transfer failed */
3578 DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd);
3580 if (intel_dp->dpcd[DP_DPCD_REV] == 0)
3581 return false; /* DPCD not present */
3583 /* Check if the panel supports PSR */
3584 memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd));
3585 if (is_edp(intel_dp)) {
3586 intel_dp_dpcd_read_wake(&intel_dp->aux, DP_PSR_SUPPORT,
3588 sizeof(intel_dp->psr_dpcd));
3589 if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) {
3590 dev_priv->psr.sink_support = true;
3591 DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
3595 /* Training Pattern 3 support, both source and sink */
3596 if (intel_dp->dpcd[DP_DPCD_REV] >= 0x12 &&
3597 intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED &&
3598 (IS_HASWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 8)) {
3599 intel_dp->use_tps3 = true;
3600 DRM_DEBUG_KMS("Displayport TPS3 supported\n");
3602 intel_dp->use_tps3 = false;
3604 if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
3605 DP_DWN_STRM_PORT_PRESENT))
3606 return true; /* native DP sink */
3608 if (intel_dp->dpcd[DP_DPCD_REV] == 0x10)
3609 return true; /* no per-port downstream info */
3611 if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_DOWNSTREAM_PORT_0,
3612 intel_dp->downstream_ports,
3613 DP_MAX_DOWNSTREAM_PORTS) < 0)
3614 return false; /* downstream port status fetch failed */
3620 intel_dp_probe_oui(struct intel_dp *intel_dp)
3624 if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
3627 if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3)
3628 DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
3629 buf[0], buf[1], buf[2]);
3631 if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3)
3632 DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
3633 buf[0], buf[1], buf[2]);
3637 intel_dp_probe_mst(struct intel_dp *intel_dp)
3641 if (!intel_dp->can_mst)
3644 if (intel_dp->dpcd[DP_DPCD_REV] < 0x12)
3647 if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_MSTM_CAP, buf, 1)) {
3648 if (buf[0] & DP_MST_CAP) {
3649 DRM_DEBUG_KMS("Sink is MST capable\n");
3650 intel_dp->is_mst = true;
3652 DRM_DEBUG_KMS("Sink is not MST capable\n");
3653 intel_dp->is_mst = false;
3657 drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst);
3658 return intel_dp->is_mst;
3661 int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
3663 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
3664 struct drm_device *dev = intel_dig_port->base.base.dev;
3665 struct intel_crtc *intel_crtc =
3666 to_intel_crtc(intel_dig_port->base.base.crtc);
3671 if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0)
3674 if (!(buf & DP_TEST_CRC_SUPPORTED))
3677 if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0)
3680 if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
3681 buf | DP_TEST_SINK_START) < 0)
3684 if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0)
3686 test_crc_count = buf & DP_TEST_COUNT_MASK;
3689 if (drm_dp_dpcd_readb(&intel_dp->aux,
3690 DP_TEST_SINK_MISC, &buf) < 0)
3692 intel_wait_for_vblank(dev, intel_crtc->pipe);
3693 } while (--attempts && (buf & DP_TEST_COUNT_MASK) == test_crc_count);
3695 if (attempts == 0) {
3696 DRM_DEBUG_KMS("Panel is unable to calculate CRC after 6 vblanks\n");
3700 if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0)
3703 if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0)
3705 if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
3706 buf & ~DP_TEST_SINK_START) < 0)
3713 intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector)
3715 return intel_dp_dpcd_read_wake(&intel_dp->aux,
3716 DP_DEVICE_SERVICE_IRQ_VECTOR,
3717 sink_irq_vector, 1) == 1;
3721 intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector)
3725 ret = intel_dp_dpcd_read_wake(&intel_dp->aux,
3727 sink_irq_vector, 14);
3735 intel_dp_handle_test_request(struct intel_dp *intel_dp)
3737 /* NAK by default */
3738 drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, DP_TEST_NAK);
3742 intel_dp_check_mst_status(struct intel_dp *intel_dp)
3746 if (intel_dp->is_mst) {
3751 bret = intel_dp_get_sink_irq_esi(intel_dp, esi);
3755 /* check link status - esi[10] = 0x200c */
3756 if (intel_dp->active_mst_links && !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
3757 DRM_DEBUG_KMS("channel EQ not ok, retraining\n");
3758 intel_dp_start_link_train(intel_dp);
3759 intel_dp_complete_link_train(intel_dp);
3760 intel_dp_stop_link_train(intel_dp);
3763 DRM_DEBUG_KMS("got esi %3ph\n", esi);
3764 ret = drm_dp_mst_hpd_irq(&intel_dp->mst_mgr, esi, &handled);
3767 for (retry = 0; retry < 3; retry++) {
3769 wret = drm_dp_dpcd_write(&intel_dp->aux,
3770 DP_SINK_COUNT_ESI+1,
3777 bret = intel_dp_get_sink_irq_esi(intel_dp, esi);
3779 DRM_DEBUG_KMS("got esi2 %3ph\n", esi);
3787 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
3788 DRM_DEBUG_KMS("failed to get ESI - device may have failed\n");
3789 intel_dp->is_mst = false;
3790 drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst);
3791 /* send a hotplug event */
3792 drm_kms_helper_hotplug_event(intel_dig_port->base.base.dev);
3799 * According to DP spec
3802 * 2. Configure link according to Receiver Capabilities
3803 * 3. Use Link Training from 2.5.3.3 and 3.5.1.3
3804 * 4. Check link status on receipt of hot-plug interrupt
3807 intel_dp_check_link_status(struct intel_dp *intel_dp)
3809 struct drm_device *dev = intel_dp_to_dev(intel_dp);
3810 struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
3812 u8 link_status[DP_LINK_STATUS_SIZE];
3814 WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
3816 if (!intel_encoder->connectors_active)
3819 if (WARN_ON(!intel_encoder->base.crtc))
3822 if (!to_intel_crtc(intel_encoder->base.crtc)->active)
3825 /* Try to read receiver status if the link appears to be up */
3826 if (!intel_dp_get_link_status(intel_dp, link_status)) {
3830 /* Now read the DPCD to see if it's actually running */
3831 if (!intel_dp_get_dpcd(intel_dp)) {
3835 /* Try to read the source of the interrupt */
3836 if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
3837 intel_dp_get_sink_irq(intel_dp, &sink_irq_vector)) {
3838 /* Clear interrupt source */
3839 drm_dp_dpcd_writeb(&intel_dp->aux,
3840 DP_DEVICE_SERVICE_IRQ_VECTOR,
3843 if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
3844 intel_dp_handle_test_request(intel_dp);
3845 if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
3846 DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
3849 if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
3850 DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
3851 intel_encoder->base.name);
3852 intel_dp_start_link_train(intel_dp);
3853 intel_dp_complete_link_train(intel_dp);
3854 intel_dp_stop_link_train(intel_dp);
3858 /* XXX this is probably wrong for multiple downstream ports */
3859 static enum drm_connector_status
3860 intel_dp_detect_dpcd(struct intel_dp *intel_dp)
3862 uint8_t *dpcd = intel_dp->dpcd;
3865 if (!intel_dp_get_dpcd(intel_dp))
3866 return connector_status_disconnected;
3868 /* if there's no downstream port, we're done */
3869 if (!(dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT))
3870 return connector_status_connected;
3872 /* If we're HPD-aware, SINK_COUNT changes dynamically */
3873 if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
3874 intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) {
3877 if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_COUNT,
3879 return connector_status_unknown;
3881 return DP_GET_SINK_COUNT(reg) ? connector_status_connected
3882 : connector_status_disconnected;
3885 /* If no HPD, poke DDC gently */
3886 if (drm_probe_ddc(&intel_dp->aux.ddc))
3887 return connector_status_connected;
3889 /* Well we tried, say unknown for unreliable port types */
3890 if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) {
3891 type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
3892 if (type == DP_DS_PORT_TYPE_VGA ||
3893 type == DP_DS_PORT_TYPE_NON_EDID)
3894 return connector_status_unknown;
3896 type = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
3897 DP_DWN_STRM_PORT_TYPE_MASK;
3898 if (type == DP_DWN_STRM_PORT_TYPE_ANALOG ||
3899 type == DP_DWN_STRM_PORT_TYPE_OTHER)
3900 return connector_status_unknown;
3903 /* Anything else is out of spec, warn and ignore */
3904 DRM_DEBUG_KMS("Broken DP branch device, ignoring\n");
3905 return connector_status_disconnected;
3908 static enum drm_connector_status
3909 edp_detect(struct intel_dp *intel_dp)
3911 struct drm_device *dev = intel_dp_to_dev(intel_dp);
3912 enum drm_connector_status status;
3914 status = intel_panel_detect(dev);
3915 if (status == connector_status_unknown)
3916 status = connector_status_connected;
3921 static enum drm_connector_status
3922 ironlake_dp_detect(struct intel_dp *intel_dp)
3924 struct drm_device *dev = intel_dp_to_dev(intel_dp);
3925 struct drm_i915_private *dev_priv = dev->dev_private;
3926 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
3928 if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
3929 return connector_status_disconnected;
3931 return intel_dp_detect_dpcd(intel_dp);
3934 static int g4x_digital_port_connected(struct drm_device *dev,
3935 struct intel_digital_port *intel_dig_port)
3937 struct drm_i915_private *dev_priv = dev->dev_private;
3940 if (IS_VALLEYVIEW(dev)) {
3941 switch (intel_dig_port->port) {
3943 bit = PORTB_HOTPLUG_LIVE_STATUS_VLV;
3946 bit = PORTC_HOTPLUG_LIVE_STATUS_VLV;
3949 bit = PORTD_HOTPLUG_LIVE_STATUS_VLV;
3955 switch (intel_dig_port->port) {
3957 bit = PORTB_HOTPLUG_LIVE_STATUS_G4X;
3960 bit = PORTC_HOTPLUG_LIVE_STATUS_G4X;
3963 bit = PORTD_HOTPLUG_LIVE_STATUS_G4X;
3970 if ((I915_READ(PORT_HOTPLUG_STAT) & bit) == 0)
3975 static enum drm_connector_status
3976 g4x_dp_detect(struct intel_dp *intel_dp)
3978 struct drm_device *dev = intel_dp_to_dev(intel_dp);
3979 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
3982 /* Can't disconnect eDP, but you can close the lid... */
3983 if (is_edp(intel_dp)) {
3984 enum drm_connector_status status;
3986 status = intel_panel_detect(dev);
3987 if (status == connector_status_unknown)
3988 status = connector_status_connected;
3992 ret = g4x_digital_port_connected(dev, intel_dig_port);
3994 return connector_status_unknown;
3996 return connector_status_disconnected;
3998 return intel_dp_detect_dpcd(intel_dp);
4001 static struct edid *
4002 intel_dp_get_edid(struct intel_dp *intel_dp)
4004 struct intel_connector *intel_connector = intel_dp->attached_connector;
4006 /* use cached edid if we have one */
4007 if (intel_connector->edid) {
4009 if (IS_ERR(intel_connector->edid))
4012 return drm_edid_duplicate(intel_connector->edid);
4014 return drm_get_edid(&intel_connector->base,
4015 &intel_dp->aux.ddc);
4019 intel_dp_set_edid(struct intel_dp *intel_dp)
4021 struct intel_connector *intel_connector = intel_dp->attached_connector;
4024 edid = intel_dp_get_edid(intel_dp);
4025 intel_connector->detect_edid = edid;
4027 if (intel_dp->force_audio != HDMI_AUDIO_AUTO)
4028 intel_dp->has_audio = intel_dp->force_audio == HDMI_AUDIO_ON;
4030 intel_dp->has_audio = drm_detect_monitor_audio(edid);
4034 intel_dp_unset_edid(struct intel_dp *intel_dp)
4036 struct intel_connector *intel_connector = intel_dp->attached_connector;
4038 kfree(intel_connector->detect_edid);
4039 intel_connector->detect_edid = NULL;
4041 intel_dp->has_audio = false;
4044 static enum intel_display_power_domain
4045 intel_dp_power_get(struct intel_dp *dp)
4047 struct intel_encoder *encoder = &dp_to_dig_port(dp)->base;
4048 enum intel_display_power_domain power_domain;
4050 power_domain = intel_display_port_power_domain(encoder);
4051 intel_display_power_get(to_i915(encoder->base.dev), power_domain);
4053 return power_domain;
4057 intel_dp_power_put(struct intel_dp *dp,
4058 enum intel_display_power_domain power_domain)
4060 struct intel_encoder *encoder = &dp_to_dig_port(dp)->base;
4061 intel_display_power_put(to_i915(encoder->base.dev), power_domain);
4064 static enum drm_connector_status
4065 intel_dp_detect(struct drm_connector *connector, bool force)
4067 struct intel_dp *intel_dp = intel_attached_dp(connector);
4068 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
4069 struct intel_encoder *intel_encoder = &intel_dig_port->base;
4070 struct drm_device *dev = connector->dev;
4071 enum drm_connector_status status;
4072 enum intel_display_power_domain power_domain;
4075 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
4076 connector->base.id, connector->name);
4077 intel_dp_unset_edid(intel_dp);
4079 if (intel_dp->is_mst) {
4080 /* MST devices are disconnected from a monitor POV */
4081 if (intel_encoder->type != INTEL_OUTPUT_EDP)
4082 intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
4083 return connector_status_disconnected;
4086 power_domain = intel_dp_power_get(intel_dp);
4088 /* Can't disconnect eDP, but you can close the lid... */
4089 if (is_edp(intel_dp))
4090 status = edp_detect(intel_dp);
4091 else if (HAS_PCH_SPLIT(dev))
4092 status = ironlake_dp_detect(intel_dp);
4094 status = g4x_dp_detect(intel_dp);
4095 if (status != connector_status_connected)
4098 intel_dp_probe_oui(intel_dp);
4100 ret = intel_dp_probe_mst(intel_dp);
4102 /* if we are in MST mode then this connector
4103 won't appear connected or have anything with EDID on it */
4104 if (intel_encoder->type != INTEL_OUTPUT_EDP)
4105 intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
4106 status = connector_status_disconnected;
4110 intel_dp_set_edid(intel_dp);
4112 if (intel_encoder->type != INTEL_OUTPUT_EDP)
4113 intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
4114 status = connector_status_connected;
4117 intel_dp_power_put(intel_dp, power_domain);
4122 intel_dp_force(struct drm_connector *connector)
4124 struct intel_dp *intel_dp = intel_attached_dp(connector);
4125 struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
4126 enum intel_display_power_domain power_domain;
4128 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
4129 connector->base.id, connector->name);
4130 intel_dp_unset_edid(intel_dp);
4132 if (connector->status != connector_status_connected)
4135 power_domain = intel_dp_power_get(intel_dp);
4137 intel_dp_set_edid(intel_dp);
4139 intel_dp_power_put(intel_dp, power_domain);
4141 if (intel_encoder->type != INTEL_OUTPUT_EDP)
4142 intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
4145 static int intel_dp_get_modes(struct drm_connector *connector)
4147 struct intel_connector *intel_connector = to_intel_connector(connector);
4150 edid = intel_connector->detect_edid;
4152 int ret = intel_connector_update_modes(connector, edid);
4157 /* if eDP has no EDID, fall back to fixed mode */
4158 if (is_edp(intel_attached_dp(connector)) &&
4159 intel_connector->panel.fixed_mode) {
4160 struct drm_display_mode *mode;
4162 mode = drm_mode_duplicate(connector->dev,
4163 intel_connector->panel.fixed_mode);
4165 drm_mode_probed_add(connector, mode);
4174 intel_dp_detect_audio(struct drm_connector *connector)
4176 bool has_audio = false;
4179 edid = to_intel_connector(connector)->detect_edid;
4181 has_audio = drm_detect_monitor_audio(edid);
4187 intel_dp_set_property(struct drm_connector *connector,
4188 struct drm_property *property,
4191 struct drm_i915_private *dev_priv = connector->dev->dev_private;
4192 struct intel_connector *intel_connector = to_intel_connector(connector);
4193 struct intel_encoder *intel_encoder = intel_attached_encoder(connector);
4194 struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
4197 ret = drm_object_property_set_value(&connector->base, property, val);
4201 if (property == dev_priv->force_audio_property) {
4205 if (i == intel_dp->force_audio)
4208 intel_dp->force_audio = i;
4210 if (i == HDMI_AUDIO_AUTO)
4211 has_audio = intel_dp_detect_audio(connector);
4213 has_audio = (i == HDMI_AUDIO_ON);
4215 if (has_audio == intel_dp->has_audio)
4218 intel_dp->has_audio = has_audio;
4222 if (property == dev_priv->broadcast_rgb_property) {
4223 bool old_auto = intel_dp->color_range_auto;
4224 uint32_t old_range = intel_dp->color_range;
4227 case INTEL_BROADCAST_RGB_AUTO:
4228 intel_dp->color_range_auto = true;
4230 case INTEL_BROADCAST_RGB_FULL:
4231 intel_dp->color_range_auto = false;
4232 intel_dp->color_range = 0;
4234 case INTEL_BROADCAST_RGB_LIMITED:
4235 intel_dp->color_range_auto = false;
4236 intel_dp->color_range = DP_COLOR_RANGE_16_235;
4242 if (old_auto == intel_dp->color_range_auto &&
4243 old_range == intel_dp->color_range)
4249 if (is_edp(intel_dp) &&
4250 property == connector->dev->mode_config.scaling_mode_property) {
4251 if (val == DRM_MODE_SCALE_NONE) {
4252 DRM_DEBUG_KMS("no scaling not supported\n");
4256 if (intel_connector->panel.fitting_mode == val) {
4257 /* the eDP scaling property is not changed */
4260 intel_connector->panel.fitting_mode = val;
4268 if (intel_encoder->base.crtc)
4269 intel_crtc_restore_mode(intel_encoder->base.crtc);
4275 intel_dp_connector_destroy(struct drm_connector *connector)
4277 struct intel_connector *intel_connector = to_intel_connector(connector);
4279 kfree(intel_connector->detect_edid);
4281 if (!IS_ERR_OR_NULL(intel_connector->edid))
4282 kfree(intel_connector->edid);
4284 /* Can't call is_edp() since the encoder may have been destroyed
4286 if (connector->connector_type == DRM_MODE_CONNECTOR_eDP)
4287 intel_panel_fini(&intel_connector->panel);
4289 drm_connector_cleanup(connector);
4293 void intel_dp_encoder_destroy(struct drm_encoder *encoder)
4295 struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
4296 struct intel_dp *intel_dp = &intel_dig_port->dp;
4298 drm_dp_aux_unregister(&intel_dp->aux);
4299 intel_dp_mst_encoder_cleanup(intel_dig_port);
4300 if (is_edp(intel_dp)) {
4301 cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
4303 * vdd might still be enabled do to the delayed vdd off.
4304 * Make sure vdd is actually turned off here.
4307 edp_panel_vdd_off_sync(intel_dp);
4308 pps_unlock(intel_dp);
4310 if (intel_dp->edp_notifier.notifier_call) {
4311 unregister_reboot_notifier(&intel_dp->edp_notifier);
4312 intel_dp->edp_notifier.notifier_call = NULL;
4315 drm_encoder_cleanup(encoder);
4316 kfree(intel_dig_port);
4319 static void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
4321 struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
4323 if (!is_edp(intel_dp))
4327 * vdd might still be enabled do to the delayed vdd off.
4328 * Make sure vdd is actually turned off here.
4330 cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
4332 edp_panel_vdd_off_sync(intel_dp);
4333 pps_unlock(intel_dp);
4336 static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp)
4338 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
4339 struct drm_device *dev = intel_dig_port->base.base.dev;
4340 struct drm_i915_private *dev_priv = dev->dev_private;
4341 enum intel_display_power_domain power_domain;
4343 lockdep_assert_held(&dev_priv->pps_mutex);
4345 if (!edp_have_panel_vdd(intel_dp))
4349 * The VDD bit needs a power domain reference, so if the bit is
4350 * already enabled when we boot or resume, grab this reference and
4351 * schedule a vdd off, so we don't hold on to the reference
4354 DRM_DEBUG_KMS("VDD left on by BIOS, adjusting state tracking\n");
4355 power_domain = intel_display_port_power_domain(&intel_dig_port->base);
4356 intel_display_power_get(dev_priv, power_domain);
4358 edp_panel_vdd_schedule_off(intel_dp);
4361 static void intel_dp_encoder_reset(struct drm_encoder *encoder)
4363 struct intel_dp *intel_dp;
4365 if (to_intel_encoder(encoder)->type != INTEL_OUTPUT_EDP)
4368 intel_dp = enc_to_intel_dp(encoder);
4373 * Read out the current power sequencer assignment,
4374 * in case the BIOS did something with it.
4376 if (IS_VALLEYVIEW(encoder->dev))
4377 vlv_initial_power_sequencer_setup(intel_dp);
4379 intel_edp_panel_vdd_sanitize(intel_dp);
4381 pps_unlock(intel_dp);
4384 static const struct drm_connector_funcs intel_dp_connector_funcs = {
4385 .dpms = intel_connector_dpms,
4386 .detect = intel_dp_detect,
4387 .force = intel_dp_force,
4388 .fill_modes = drm_helper_probe_single_connector_modes,
4389 .set_property = intel_dp_set_property,
4390 .atomic_get_property = intel_connector_atomic_get_property,
4391 .destroy = intel_dp_connector_destroy,
4392 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
4395 static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
4396 .get_modes = intel_dp_get_modes,
4397 .mode_valid = intel_dp_mode_valid,
4398 .best_encoder = intel_best_encoder,
4401 static const struct drm_encoder_funcs intel_dp_enc_funcs = {
4402 .reset = intel_dp_encoder_reset,
4403 .destroy = intel_dp_encoder_destroy,
4407 intel_dp_hot_plug(struct intel_encoder *intel_encoder)
4413 intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
4415 struct intel_dp *intel_dp = &intel_dig_port->dp;
4416 struct intel_encoder *intel_encoder = &intel_dig_port->base;
4417 struct drm_device *dev = intel_dig_port->base.base.dev;
4418 struct drm_i915_private *dev_priv = dev->dev_private;
4419 enum intel_display_power_domain power_domain;
4420 enum irqreturn ret = IRQ_NONE;
4422 if (intel_dig_port->base.type != INTEL_OUTPUT_EDP)
4423 intel_dig_port->base.type = INTEL_OUTPUT_DISPLAYPORT;
4425 if (long_hpd && intel_dig_port->base.type == INTEL_OUTPUT_EDP) {
4427 * vdd off can generate a long pulse on eDP which
4428 * would require vdd on to handle it, and thus we
4429 * would end up in an endless cycle of
4430 * "vdd off -> long hpd -> vdd on -> detect -> vdd off -> ..."
4432 DRM_DEBUG_KMS("ignoring long hpd on eDP port %c\n",
4433 port_name(intel_dig_port->port));
4437 DRM_DEBUG_KMS("got hpd irq on port %c - %s\n",
4438 port_name(intel_dig_port->port),
4439 long_hpd ? "long" : "short");
4441 power_domain = intel_display_port_power_domain(intel_encoder);
4442 intel_display_power_get(dev_priv, power_domain);
4446 if (HAS_PCH_SPLIT(dev)) {
4447 if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
4450 if (g4x_digital_port_connected(dev, intel_dig_port) != 1)
4454 if (!intel_dp_get_dpcd(intel_dp)) {
4458 intel_dp_probe_oui(intel_dp);
4460 if (!intel_dp_probe_mst(intel_dp))
4464 if (intel_dp->is_mst) {
4465 if (intel_dp_check_mst_status(intel_dp) == -EINVAL)
4469 if (!intel_dp->is_mst) {
4471 * we'll check the link status via the normal hot plug path later -
4472 * but for short hpds we should check it now
4474 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
4475 intel_dp_check_link_status(intel_dp);
4476 drm_modeset_unlock(&dev->mode_config.connection_mutex);
4484 /* if we were in MST mode, and device is not there get out of MST mode */
4485 if (intel_dp->is_mst) {
4486 DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n", intel_dp->is_mst, intel_dp->mst_mgr.mst_state);
4487 intel_dp->is_mst = false;
4488 drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst);
4491 intel_display_power_put(dev_priv, power_domain);
4496 /* Return which DP Port should be selected for Transcoder DP control */
4498 intel_trans_dp_port_sel(struct drm_crtc *crtc)
4500 struct drm_device *dev = crtc->dev;
4501 struct intel_encoder *intel_encoder;
4502 struct intel_dp *intel_dp;
4504 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
4505 intel_dp = enc_to_intel_dp(&intel_encoder->base);
4507 if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
4508 intel_encoder->type == INTEL_OUTPUT_EDP)
4509 return intel_dp->output_reg;
4515 /* check the VBT to see whether the eDP is on DP-D port */
4516 bool intel_dp_is_edp(struct drm_device *dev, enum port port)
4518 struct drm_i915_private *dev_priv = dev->dev_private;
4519 union child_device_config *p_child;
4521 static const short port_mapping[] = {
4522 [PORT_B] = PORT_IDPB,
4523 [PORT_C] = PORT_IDPC,
4524 [PORT_D] = PORT_IDPD,
4530 if (!dev_priv->vbt.child_dev_num)
4533 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
4534 p_child = dev_priv->vbt.child_dev + i;
4536 if (p_child->common.dvo_port == port_mapping[port] &&
4537 (p_child->common.device_type & DEVICE_TYPE_eDP_BITS) ==
4538 (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS))
4545 intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector)
4547 struct intel_connector *intel_connector = to_intel_connector(connector);
4549 intel_attach_force_audio_property(connector);
4550 intel_attach_broadcast_rgb_property(connector);
4551 intel_dp->color_range_auto = true;
4553 if (is_edp(intel_dp)) {
4554 drm_mode_create_scaling_mode_property(connector->dev);
4555 drm_object_attach_property(
4557 connector->dev->mode_config.scaling_mode_property,
4558 DRM_MODE_SCALE_ASPECT);
4559 intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
4563 static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
4565 intel_dp->last_power_cycle = jiffies;
4566 intel_dp->last_power_on = jiffies;
4567 intel_dp->last_backlight_off = jiffies;
4571 intel_dp_init_panel_power_sequencer(struct drm_device *dev,
4572 struct intel_dp *intel_dp)
4574 struct drm_i915_private *dev_priv = dev->dev_private;
4575 struct edp_power_seq cur, vbt, spec,
4576 *final = &intel_dp->pps_delays;
4577 u32 pp_on, pp_off, pp_div, pp;
4578 int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg;
4580 lockdep_assert_held(&dev_priv->pps_mutex);
4582 /* already initialized? */
4583 if (final->t11_t12 != 0)
4586 if (HAS_PCH_SPLIT(dev)) {
4587 pp_ctrl_reg = PCH_PP_CONTROL;
4588 pp_on_reg = PCH_PP_ON_DELAYS;
4589 pp_off_reg = PCH_PP_OFF_DELAYS;
4590 pp_div_reg = PCH_PP_DIVISOR;
4592 enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
4594 pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
4595 pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
4596 pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe);
4597 pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
4600 /* Workaround: Need to write PP_CONTROL with the unlock key as
4601 * the very first thing. */
4602 pp = ironlake_get_pp_control(intel_dp);
4603 I915_WRITE(pp_ctrl_reg, pp);
4605 pp_on = I915_READ(pp_on_reg);
4606 pp_off = I915_READ(pp_off_reg);
4607 pp_div = I915_READ(pp_div_reg);
4609 /* Pull timing values out of registers */
4610 cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
4611 PANEL_POWER_UP_DELAY_SHIFT;
4613 cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >>
4614 PANEL_LIGHT_ON_DELAY_SHIFT;
4616 cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >>
4617 PANEL_LIGHT_OFF_DELAY_SHIFT;
4619 cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
4620 PANEL_POWER_DOWN_DELAY_SHIFT;
4622 cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
4623 PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
4625 DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
4626 cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
4628 vbt = dev_priv->vbt.edp_pps;
4630 /* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
4631 * our hw here, which are all in 100usec. */
4632 spec.t1_t3 = 210 * 10;
4633 spec.t8 = 50 * 10; /* no limit for t8, use t7 instead */
4634 spec.t9 = 50 * 10; /* no limit for t9, make it symmetric with t8 */
4635 spec.t10 = 500 * 10;
4636 /* This one is special and actually in units of 100ms, but zero
4637 * based in the hw (so we need to add 100 ms). But the sw vbt
4638 * table multiplies it with 1000 to make it in units of 100usec,
4640 spec.t11_t12 = (510 + 100) * 10;
4642 DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
4643 vbt.t1_t3, vbt.t8, vbt.t9, vbt.t10, vbt.t11_t12);
4645 /* Use the max of the register settings and vbt. If both are
4646 * unset, fall back to the spec limits. */
4647 #define assign_final(field) final->field = (max(cur.field, vbt.field) == 0 ? \
4649 max(cur.field, vbt.field))
4650 assign_final(t1_t3);
4654 assign_final(t11_t12);
4657 #define get_delay(field) (DIV_ROUND_UP(final->field, 10))
4658 intel_dp->panel_power_up_delay = get_delay(t1_t3);
4659 intel_dp->backlight_on_delay = get_delay(t8);
4660 intel_dp->backlight_off_delay = get_delay(t9);
4661 intel_dp->panel_power_down_delay = get_delay(t10);
4662 intel_dp->panel_power_cycle_delay = get_delay(t11_t12);
4665 DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
4666 intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay,
4667 intel_dp->panel_power_cycle_delay);
4669 DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
4670 intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
4674 intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
4675 struct intel_dp *intel_dp)
4677 struct drm_i915_private *dev_priv = dev->dev_private;
4678 u32 pp_on, pp_off, pp_div, port_sel = 0;
4679 int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev);
4680 int pp_on_reg, pp_off_reg, pp_div_reg;
4681 enum port port = dp_to_dig_port(intel_dp)->port;
4682 const struct edp_power_seq *seq = &intel_dp->pps_delays;
4684 lockdep_assert_held(&dev_priv->pps_mutex);
4686 if (HAS_PCH_SPLIT(dev)) {
4687 pp_on_reg = PCH_PP_ON_DELAYS;
4688 pp_off_reg = PCH_PP_OFF_DELAYS;
4689 pp_div_reg = PCH_PP_DIVISOR;
4691 enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
4693 pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
4694 pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe);
4695 pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
4699 * And finally store the new values in the power sequencer. The
4700 * backlight delays are set to 1 because we do manual waits on them. For
4701 * T8, even BSpec recommends doing it. For T9, if we don't do this,
4702 * we'll end up waiting for the backlight off delay twice: once when we
4703 * do the manual sleep, and once when we disable the panel and wait for
4704 * the PP_STATUS bit to become zero.
4706 pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
4707 (1 << PANEL_LIGHT_ON_DELAY_SHIFT);
4708 pp_off = (1 << PANEL_LIGHT_OFF_DELAY_SHIFT) |
4709 (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
4710 /* Compute the divisor for the pp clock, simply match the Bspec
4712 pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
4713 pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
4714 << PANEL_POWER_CYCLE_DELAY_SHIFT);
4716 /* Haswell doesn't have any port selection bits for the panel
4717 * power sequencer any more. */
4718 if (IS_VALLEYVIEW(dev)) {
4719 port_sel = PANEL_PORT_SELECT_VLV(port);
4720 } else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
4722 port_sel = PANEL_PORT_SELECT_DPA;
4724 port_sel = PANEL_PORT_SELECT_DPD;
4729 I915_WRITE(pp_on_reg, pp_on);
4730 I915_WRITE(pp_off_reg, pp_off);
4731 I915_WRITE(pp_div_reg, pp_div);
4733 DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
4734 I915_READ(pp_on_reg),
4735 I915_READ(pp_off_reg),
4736 I915_READ(pp_div_reg));
4739 static void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate)
4741 struct drm_i915_private *dev_priv = dev->dev_private;
4742 struct intel_encoder *encoder;
4743 struct intel_digital_port *dig_port = NULL;
4744 struct intel_dp *intel_dp = dev_priv->drrs.dp;
4745 struct intel_crtc_state *config = NULL;
4746 struct intel_crtc *intel_crtc = NULL;
4748 enum drrs_refresh_rate_type index = DRRS_HIGH_RR;
4750 if (refresh_rate <= 0) {
4751 DRM_DEBUG_KMS("Refresh rate should be positive non-zero.\n");
4755 if (intel_dp == NULL) {
4756 DRM_DEBUG_KMS("DRRS not supported.\n");
4761 * FIXME: This needs proper synchronization with psr state for some
4762 * platforms that cannot have PSR and DRRS enabled at the same time.
4765 dig_port = dp_to_dig_port(intel_dp);
4766 encoder = &dig_port->base;
4767 intel_crtc = encoder->new_crtc;
4770 DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n");
4774 config = intel_crtc->config;
4776 if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) {
4777 DRM_DEBUG_KMS("Only Seamless DRRS supported.\n");
4781 if (intel_dp->attached_connector->panel.downclock_mode->vrefresh ==
4783 index = DRRS_LOW_RR;
4785 if (index == dev_priv->drrs.refresh_rate_type) {
4787 "DRRS requested for previously set RR...ignoring\n");
4791 if (!intel_crtc->active) {
4792 DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n");
4796 if (INTEL_INFO(dev)->gen > 6 && INTEL_INFO(dev)->gen < 8) {
4797 reg = PIPECONF(intel_crtc->config->cpu_transcoder);
4798 val = I915_READ(reg);
4799 if (index > DRRS_HIGH_RR) {
4800 val |= PIPECONF_EDP_RR_MODE_SWITCH;
4801 intel_dp_set_m_n(intel_crtc);
4803 val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
4805 I915_WRITE(reg, val);
4808 dev_priv->drrs.refresh_rate_type = index;
4810 DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate);
4813 void intel_edp_drrs_enable(struct intel_dp *intel_dp)
4815 struct drm_device *dev = intel_dp_to_dev(intel_dp);
4816 struct drm_i915_private *dev_priv = dev->dev_private;
4817 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
4818 struct drm_crtc *crtc = dig_port->base.base.crtc;
4819 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4821 if (!intel_crtc->config->has_drrs) {
4822 DRM_DEBUG_KMS("Panel doesn't support DRRS\n");
4826 mutex_lock(&dev_priv->drrs.mutex);
4827 if (WARN_ON(dev_priv->drrs.dp)) {
4828 DRM_ERROR("DRRS already enabled\n");
4832 dev_priv->drrs.busy_frontbuffer_bits = 0;
4834 dev_priv->drrs.dp = intel_dp;
4837 mutex_unlock(&dev_priv->drrs.mutex);
4840 void intel_edp_drrs_disable(struct intel_dp *intel_dp)
4842 struct drm_device *dev = intel_dp_to_dev(intel_dp);
4843 struct drm_i915_private *dev_priv = dev->dev_private;
4844 struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
4845 struct drm_crtc *crtc = dig_port->base.base.crtc;
4846 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4848 if (!intel_crtc->config->has_drrs)
4851 mutex_lock(&dev_priv->drrs.mutex);
4852 if (!dev_priv->drrs.dp) {
4853 mutex_unlock(&dev_priv->drrs.mutex);
4857 if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
4858 intel_dp_set_drrs_state(dev_priv->dev,
4859 intel_dp->attached_connector->panel.
4860 fixed_mode->vrefresh);
4862 dev_priv->drrs.dp = NULL;
4863 mutex_unlock(&dev_priv->drrs.mutex);
4865 cancel_delayed_work_sync(&dev_priv->drrs.work);
4868 static void intel_edp_drrs_downclock_work(struct work_struct *work)
4870 struct drm_i915_private *dev_priv =
4871 container_of(work, typeof(*dev_priv), drrs.work.work);
4872 struct intel_dp *intel_dp;
4874 mutex_lock(&dev_priv->drrs.mutex);
4876 intel_dp = dev_priv->drrs.dp;
4882 * The delayed work can race with an invalidate hence we need to
4886 if (dev_priv->drrs.busy_frontbuffer_bits)
4889 if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR)
4890 intel_dp_set_drrs_state(dev_priv->dev,
4891 intel_dp->attached_connector->panel.
4892 downclock_mode->vrefresh);
4896 mutex_unlock(&dev_priv->drrs.mutex);
4899 void intel_edp_drrs_invalidate(struct drm_device *dev,
4900 unsigned frontbuffer_bits)
4902 struct drm_i915_private *dev_priv = dev->dev_private;
4903 struct drm_crtc *crtc;
4906 if (!dev_priv->drrs.dp)
4909 mutex_lock(&dev_priv->drrs.mutex);
4910 crtc = dp_to_dig_port(dev_priv->drrs.dp)->base.base.crtc;
4911 pipe = to_intel_crtc(crtc)->pipe;
4913 if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) {
4914 cancel_delayed_work_sync(&dev_priv->drrs.work);
4915 intel_dp_set_drrs_state(dev_priv->dev,
4916 dev_priv->drrs.dp->attached_connector->panel.
4917 fixed_mode->vrefresh);
4920 frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
4922 dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
4923 mutex_unlock(&dev_priv->drrs.mutex);
4926 void intel_edp_drrs_flush(struct drm_device *dev,
4927 unsigned frontbuffer_bits)
4929 struct drm_i915_private *dev_priv = dev->dev_private;
4930 struct drm_crtc *crtc;
4933 if (!dev_priv->drrs.dp)
4936 mutex_lock(&dev_priv->drrs.mutex);
4937 crtc = dp_to_dig_port(dev_priv->drrs.dp)->base.base.crtc;
4938 pipe = to_intel_crtc(crtc)->pipe;
4939 dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits;
4941 cancel_delayed_work_sync(&dev_priv->drrs.work);
4943 if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR &&
4944 !dev_priv->drrs.busy_frontbuffer_bits)
4945 schedule_delayed_work(&dev_priv->drrs.work,
4946 msecs_to_jiffies(1000));
4947 mutex_unlock(&dev_priv->drrs.mutex);
4950 static struct drm_display_mode *
4951 intel_dp_drrs_init(struct intel_connector *intel_connector,
4952 struct drm_display_mode *fixed_mode)
4954 struct drm_connector *connector = &intel_connector->base;
4955 struct drm_device *dev = connector->dev;
4956 struct drm_i915_private *dev_priv = dev->dev_private;
4957 struct drm_display_mode *downclock_mode = NULL;
4959 if (INTEL_INFO(dev)->gen <= 6) {
4960 DRM_DEBUG_KMS("DRRS supported for Gen7 and above\n");
4964 if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) {
4965 DRM_DEBUG_KMS("VBT doesn't support DRRS\n");
4969 downclock_mode = intel_find_panel_downclock
4970 (dev, fixed_mode, connector);
4972 if (!downclock_mode) {
4973 DRM_DEBUG_KMS("DRRS not supported\n");
4977 INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work);
4979 mutex_init(&dev_priv->drrs.mutex);
4981 dev_priv->drrs.type = dev_priv->vbt.drrs_type;
4983 dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR;
4984 DRM_DEBUG_KMS("seamless DRRS supported for eDP panel.\n");
4985 return downclock_mode;
4988 static bool intel_edp_init_connector(struct intel_dp *intel_dp,
4989 struct intel_connector *intel_connector)
4991 struct drm_connector *connector = &intel_connector->base;
4992 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
4993 struct intel_encoder *intel_encoder = &intel_dig_port->base;
4994 struct drm_device *dev = intel_encoder->base.dev;
4995 struct drm_i915_private *dev_priv = dev->dev_private;
4996 struct drm_display_mode *fixed_mode = NULL;
4997 struct drm_display_mode *downclock_mode = NULL;
4999 struct drm_display_mode *scan;
5001 enum pipe pipe = INVALID_PIPE;
5003 dev_priv->drrs.type = DRRS_NOT_SUPPORTED;
5005 if (!is_edp(intel_dp))
5009 intel_edp_panel_vdd_sanitize(intel_dp);
5010 pps_unlock(intel_dp);
5012 /* Cache DPCD and EDID for edp. */
5013 has_dpcd = intel_dp_get_dpcd(intel_dp);
5016 if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
5017 dev_priv->no_aux_handshake =
5018 intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
5019 DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
5021 /* if this fails, presume the device is a ghost */
5022 DRM_INFO("failed to retrieve link info, disabling eDP\n");
5026 /* We now know it's not a ghost, init power sequence regs. */
5028 intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
5029 pps_unlock(intel_dp);
5031 mutex_lock(&dev->mode_config.mutex);
5032 edid = drm_get_edid(connector, &intel_dp->aux.ddc);
5034 if (drm_add_edid_modes(connector, edid)) {
5035 drm_mode_connector_update_edid_property(connector,
5037 drm_edid_to_eld(connector, edid);
5040 edid = ERR_PTR(-EINVAL);
5043 edid = ERR_PTR(-ENOENT);
5045 intel_connector->edid = edid;
5047 /* prefer fixed mode from EDID if available */
5048 list_for_each_entry(scan, &connector->probed_modes, head) {
5049 if ((scan->type & DRM_MODE_TYPE_PREFERRED)) {
5050 fixed_mode = drm_mode_duplicate(dev, scan);
5051 downclock_mode = intel_dp_drrs_init(
5052 intel_connector, fixed_mode);
5057 /* fallback to VBT if available for eDP */
5058 if (!fixed_mode && dev_priv->vbt.lfp_lvds_vbt_mode) {
5059 fixed_mode = drm_mode_duplicate(dev,
5060 dev_priv->vbt.lfp_lvds_vbt_mode);
5062 fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
5064 mutex_unlock(&dev->mode_config.mutex);
5066 if (IS_VALLEYVIEW(dev)) {
5067 intel_dp->edp_notifier.notifier_call = edp_notify_handler;
5068 register_reboot_notifier(&intel_dp->edp_notifier);
5071 * Figure out the current pipe for the initial backlight setup.
5072 * If the current pipe isn't valid, try the PPS pipe, and if that
5073 * fails just assume pipe A.
5075 if (IS_CHERRYVIEW(dev))
5076 pipe = DP_PORT_TO_PIPE_CHV(intel_dp->DP);
5078 pipe = PORT_TO_PIPE(intel_dp->DP);
5080 if (pipe != PIPE_A && pipe != PIPE_B)
5081 pipe = intel_dp->pps_pipe;
5083 if (pipe != PIPE_A && pipe != PIPE_B)
5086 DRM_DEBUG_KMS("using pipe %c for initial backlight setup\n",
5090 intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
5091 intel_connector->panel.backlight_power = intel_edp_backlight_power;
5092 intel_panel_setup_backlight(connector, pipe);
5098 intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
5099 struct intel_connector *intel_connector)
5101 struct drm_connector *connector = &intel_connector->base;
5102 struct intel_dp *intel_dp = &intel_dig_port->dp;
5103 struct intel_encoder *intel_encoder = &intel_dig_port->base;
5104 struct drm_device *dev = intel_encoder->base.dev;
5105 struct drm_i915_private *dev_priv = dev->dev_private;
5106 enum port port = intel_dig_port->port;
5109 intel_dp->pps_pipe = INVALID_PIPE;
5111 /* intel_dp vfuncs */
5112 if (INTEL_INFO(dev)->gen >= 9)
5113 intel_dp->get_aux_clock_divider = skl_get_aux_clock_divider;
5114 else if (IS_VALLEYVIEW(dev))
5115 intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider;
5116 else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
5117 intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider;
5118 else if (HAS_PCH_SPLIT(dev))
5119 intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider;
5121 intel_dp->get_aux_clock_divider = i9xx_get_aux_clock_divider;
5123 if (INTEL_INFO(dev)->gen >= 9)
5124 intel_dp->get_aux_send_ctl = skl_get_aux_send_ctl;
5126 intel_dp->get_aux_send_ctl = i9xx_get_aux_send_ctl;
5128 /* Preserve the current hw state. */
5129 intel_dp->DP = I915_READ(intel_dp->output_reg);
5130 intel_dp->attached_connector = intel_connector;
5132 if (intel_dp_is_edp(dev, port))
5133 type = DRM_MODE_CONNECTOR_eDP;
5135 type = DRM_MODE_CONNECTOR_DisplayPort;
5138 * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
5139 * for DP the encoder type can be set by the caller to
5140 * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
5142 if (type == DRM_MODE_CONNECTOR_eDP)
5143 intel_encoder->type = INTEL_OUTPUT_EDP;
5145 /* eDP only on port B and/or C on vlv/chv */
5146 if (WARN_ON(IS_VALLEYVIEW(dev) && is_edp(intel_dp) &&
5147 port != PORT_B && port != PORT_C))
5150 DRM_DEBUG_KMS("Adding %s connector on port %c\n",
5151 type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP",
5154 drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
5155 drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
5157 connector->interlace_allowed = true;
5158 connector->doublescan_allowed = 0;
5160 INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
5161 edp_panel_vdd_work);
5163 intel_connector_attach_encoder(intel_connector, intel_encoder);
5164 drm_connector_register(connector);
5167 intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
5169 intel_connector->get_hw_state = intel_connector_get_hw_state;
5170 intel_connector->unregister = intel_dp_connector_unregister;
5172 /* Set up the hotplug pin. */
5175 intel_encoder->hpd_pin = HPD_PORT_A;
5178 intel_encoder->hpd_pin = HPD_PORT_B;
5181 intel_encoder->hpd_pin = HPD_PORT_C;
5184 intel_encoder->hpd_pin = HPD_PORT_D;
5190 if (is_edp(intel_dp)) {
5192 intel_dp_init_panel_power_timestamps(intel_dp);
5193 if (IS_VALLEYVIEW(dev))
5194 vlv_initial_power_sequencer_setup(intel_dp);
5196 intel_dp_init_panel_power_sequencer(dev, intel_dp);
5197 pps_unlock(intel_dp);
5200 intel_dp_aux_init(intel_dp, intel_connector);
5202 /* init MST on ports that can support it */
5203 if (IS_HASWELL(dev) || IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) {
5204 if (port == PORT_B || port == PORT_C || port == PORT_D) {
5205 intel_dp_mst_encoder_init(intel_dig_port,
5206 intel_connector->base.base.id);
5210 if (!intel_edp_init_connector(intel_dp, intel_connector)) {
5211 drm_dp_aux_unregister(&intel_dp->aux);
5212 if (is_edp(intel_dp)) {
5213 cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
5215 * vdd might still be enabled do to the delayed vdd off.
5216 * Make sure vdd is actually turned off here.
5219 edp_panel_vdd_off_sync(intel_dp);
5220 pps_unlock(intel_dp);
5222 drm_connector_unregister(connector);
5223 drm_connector_cleanup(connector);
5227 intel_dp_add_properties(intel_dp, connector);
5229 /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
5230 * 0xd. Failure to do so will result in spurious interrupts being
5231 * generated on the port when a cable is not attached.
5233 if (IS_G4X(dev) && !IS_GM45(dev)) {
5234 u32 temp = I915_READ(PEG_BAND_GAP_DATA);
5235 I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
5242 intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
5244 struct drm_i915_private *dev_priv = dev->dev_private;
5245 struct intel_digital_port *intel_dig_port;
5246 struct intel_encoder *intel_encoder;
5247 struct drm_encoder *encoder;
5248 struct intel_connector *intel_connector;
5250 intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL);
5251 if (!intel_dig_port)
5254 intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
5255 if (!intel_connector) {
5256 kfree(intel_dig_port);
5260 intel_encoder = &intel_dig_port->base;
5261 encoder = &intel_encoder->base;
5263 drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs,
5264 DRM_MODE_ENCODER_TMDS);
5266 intel_encoder->compute_config = intel_dp_compute_config;
5267 intel_encoder->disable = intel_disable_dp;
5268 intel_encoder->get_hw_state = intel_dp_get_hw_state;
5269 intel_encoder->get_config = intel_dp_get_config;
5270 intel_encoder->suspend = intel_dp_encoder_suspend;
5271 if (IS_CHERRYVIEW(dev)) {
5272 intel_encoder->pre_pll_enable = chv_dp_pre_pll_enable;
5273 intel_encoder->pre_enable = chv_pre_enable_dp;
5274 intel_encoder->enable = vlv_enable_dp;
5275 intel_encoder->post_disable = chv_post_disable_dp;
5276 } else if (IS_VALLEYVIEW(dev)) {
5277 intel_encoder->pre_pll_enable = vlv_dp_pre_pll_enable;
5278 intel_encoder->pre_enable = vlv_pre_enable_dp;
5279 intel_encoder->enable = vlv_enable_dp;
5280 intel_encoder->post_disable = vlv_post_disable_dp;
5282 intel_encoder->pre_enable = g4x_pre_enable_dp;
5283 intel_encoder->enable = g4x_enable_dp;
5284 if (INTEL_INFO(dev)->gen >= 5)
5285 intel_encoder->post_disable = ilk_post_disable_dp;
5288 intel_dig_port->port = port;
5289 intel_dig_port->dp.output_reg = output_reg;
5291 intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
5292 if (IS_CHERRYVIEW(dev)) {
5294 intel_encoder->crtc_mask = 1 << 2;
5296 intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
5298 intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
5300 intel_encoder->cloneable = 0;
5301 intel_encoder->hot_plug = intel_dp_hot_plug;
5303 intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
5304 dev_priv->hpd_irq_port[port] = intel_dig_port;
5306 if (!intel_dp_init_connector(intel_dig_port, intel_connector)) {
5307 drm_encoder_cleanup(encoder);
5308 kfree(intel_dig_port);
5309 kfree(intel_connector);
5313 void intel_dp_mst_suspend(struct drm_device *dev)
5315 struct drm_i915_private *dev_priv = dev->dev_private;
5319 for (i = 0; i < I915_MAX_PORTS; i++) {
5320 struct intel_digital_port *intel_dig_port = dev_priv->hpd_irq_port[i];
5321 if (!intel_dig_port)
5324 if (intel_dig_port->base.type == INTEL_OUTPUT_DISPLAYPORT) {
5325 if (!intel_dig_port->dp.can_mst)
5327 if (intel_dig_port->dp.is_mst)
5328 drm_dp_mst_topology_mgr_suspend(&intel_dig_port->dp.mst_mgr);
5333 void intel_dp_mst_resume(struct drm_device *dev)
5335 struct drm_i915_private *dev_priv = dev->dev_private;
5338 for (i = 0; i < I915_MAX_PORTS; i++) {
5339 struct intel_digital_port *intel_dig_port = dev_priv->hpd_irq_port[i];
5340 if (!intel_dig_port)
5342 if (intel_dig_port->base.type == INTEL_OUTPUT_DISPLAYPORT) {
5345 if (!intel_dig_port->dp.can_mst)
5348 ret = drm_dp_mst_topology_mgr_resume(&intel_dig_port->dp.mst_mgr);
5350 intel_dp_check_mst_status(&intel_dig_port->dp);