drivers/gpu/drm/i915/intel_display.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *      Eric Anholt <eric@anholt.net>
  25  */
  26
  27 #include <linux/dmi.h>
  28 #include <linux/module.h>
  29 #include <linux/input.h>
  30 #include <linux/i2c.h>
  31 #include <linux/kernel.h>
  32 #include <linux/slab.h>
  33 #include <linux/vgaarb.h>
  34 #include <drm/drm_edid.h>
  35 #include <drm/drmP.h>
  36 #include "intel_drv.h"
  37 #include <drm/i915_drm.h>
  38 #include "i915_drv.h"
  39 #include "i915_trace.h"
  40 #include <drm/drm_atomic.h>
  41 #include <drm/drm_atomic_helper.h>
  42 #include <drm/drm_dp_helper.h>
  43 #include <drm/drm_crtc_helper.h>
  44 #include <drm/drm_plane_helper.h>
  45 #include <drm/drm_rect.h>
  46 #include <linux/dma_remapping.h>
  47
  48 /* Primary plane formats for gen <= 3 */
  49 static const uint32_t i8xx_primary_formats[] = {
  50         DRM_FORMAT_C8,
  51         DRM_FORMAT_RGB565,
  52         DRM_FORMAT_XRGB1555,
  53         DRM_FORMAT_XRGB8888,
  54 };
  55
  56 /* Primary plane formats for gen >= 4 */
  57 static const uint32_t i965_primary_formats[] = {
  58         DRM_FORMAT_C8,
  59         DRM_FORMAT_RGB565,
  60         DRM_FORMAT_XRGB8888,
  61         DRM_FORMAT_XBGR8888,
  62         DRM_FORMAT_XRGB2101010,
  63         DRM_FORMAT_XBGR2101010,
  64 };
  65
  66 static const uint32_t skl_primary_formats[] = {
  67         DRM_FORMAT_C8,
  68         DRM_FORMAT_RGB565,
  69         DRM_FORMAT_XRGB8888,
  70         DRM_FORMAT_XBGR8888,
  71         DRM_FORMAT_ARGB8888,
  72         DRM_FORMAT_ABGR8888,
  73         DRM_FORMAT_XRGB2101010,
  74         DRM_FORMAT_XBGR2101010,
  75         DRM_FORMAT_YUYV,
  76         DRM_FORMAT_YVYU,
  77         DRM_FORMAT_UYVY,
  78         DRM_FORMAT_VYUY,
  79 };
  80
  81 /* Cursor formats */
  82 static const uint32_t intel_cursor_formats[] = {
  83         DRM_FORMAT_ARGB8888,
  84 };
  85
  86 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
  87
  88 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
  89                                 struct intel_crtc_state *pipe_config);
  90 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
  91                                    struct intel_crtc_state *pipe_config);
  92
  93 static int intel_framebuffer_init(struct drm_device *dev,
  94                                   struct intel_framebuffer *ifb,
  95                                   struct drm_mode_fb_cmd2 *mode_cmd,
  96                                   struct drm_i915_gem_object *obj);
  97 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc);
  98 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc);
  99 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
 100                                          struct intel_link_m_n *m_n,
 101                                          struct intel_link_m_n *m2_n2);
 102 static void ironlake_set_pipeconf(struct drm_crtc *crtc);
 103 static void haswell_set_pipeconf(struct drm_crtc *crtc);
 104 static void intel_set_pipe_csc(struct drm_crtc *crtc);
 105 static void vlv_prepare_pll(struct intel_crtc *crtc,
 106                             const struct intel_crtc_state *pipe_config);
 107 static void chv_prepare_pll(struct intel_crtc *crtc,
 108                             const struct intel_crtc_state *pipe_config);
 109 static void intel_begin_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
 110 static void intel_finish_crtc_commit(struct drm_crtc *, struct drm_crtc_state *);
 111 static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
 112         struct intel_crtc_state *crtc_state);
 113 static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
 114                            int num_connectors);
 115 static void skylake_pfit_enable(struct intel_crtc *crtc);
 116 static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
 117 static void ironlake_pfit_enable(struct intel_crtc *crtc);
 118 static void intel_modeset_setup_hw_state(struct drm_device *dev);
 119
 120 typedef struct {
 121         int     min, max;
 122 } intel_range_t;
 123
 124 typedef struct {
 125         int     dot_limit;
 126         int     p2_slow, p2_fast;
 127 } intel_p2_t;
 128
 129 typedef struct intel_limit intel_limit_t;
 130 struct intel_limit {
 131         intel_range_t   dot, vco, n, m, m1, m2, p, p1;
 132         intel_p2_t          p2;
 133 };
 134
 135 /* returns HPLL frequency in kHz */
 136 static int valleyview_get_vco(struct drm_i915_private *dev_priv)
 137 {
 138         int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
 139
 140         /* Obtain SKU information */
 141         mutex_lock(&dev_priv->sb_lock);
 142         hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
 143                 CCK_FUSE_HPLL_FREQ_MASK;
 144         mutex_unlock(&dev_priv->sb_lock);
 145
 146         return vco_freq[hpll_freq] * 1000;
 147 }
 148
 149 static int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
 150                                   const char *name, u32 reg)
 151 {
 152         u32 val;
 153         int divider;
 154
 155         if (dev_priv->hpll_freq == 0)
 156                 dev_priv->hpll_freq = valleyview_get_vco(dev_priv);
 157
 158         mutex_lock(&dev_priv->sb_lock);
 159         val = vlv_cck_read(dev_priv, reg);
 160         mutex_unlock(&dev_priv->sb_lock);
 161
 162         divider = val & CCK_FREQUENCY_VALUES;
 163
 164         WARN((val & CCK_FREQUENCY_STATUS) !=
 165              (divider << CCK_FREQUENCY_STATUS_SHIFT),
 166              "%s change in progress\n", name);
 167
 168         return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, divider + 1);
 169 }
 170
 171 int
 172 intel_pch_rawclk(struct drm_device *dev)
 173 {
 174         struct drm_i915_private *dev_priv = dev->dev_private;
 175
 176         WARN_ON(!HAS_PCH_SPLIT(dev));
 177
 178         return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
 179 }
 180
 181 /* hrawclock is 1/4 the FSB frequency */
 182 int intel_hrawclk(struct drm_device *dev)
 183 {
 184         struct drm_i915_private *dev_priv = dev->dev_private;
 185         uint32_t clkcfg;
 186
 187         /* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */
 188         if (IS_VALLEYVIEW(dev))
 189                 return 200;
 190
 191         clkcfg = I915_READ(CLKCFG);
 192         switch (clkcfg & CLKCFG_FSB_MASK) {
 193         case CLKCFG_FSB_400:
 194                 return 100;
 195         case CLKCFG_FSB_533:
 196                 return 133;
 197         case CLKCFG_FSB_667:
 198                 return 166;
 199         case CLKCFG_FSB_800:
 200                 return 200;
 201         case CLKCFG_FSB_1067:
 202                 return 266;
 203         case CLKCFG_FSB_1333:
 204                 return 333;
 205         /* these two are just a guess; one of them might be right */
 206         case CLKCFG_FSB_1600:
 207         case CLKCFG_FSB_1600_ALT:
 208                 return 400;
 209         default:
 210                 return 133;
 211         }
 212 }
 213
 214 static void intel_update_czclk(struct drm_i915_private *dev_priv)
 215 {
 216         if (!IS_VALLEYVIEW(dev_priv))
 217                 return;
 218
 219         dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk",
 220                                                       CCK_CZ_CLOCK_CONTROL);
 221
 222         DRM_DEBUG_DRIVER("CZ clock rate: %d kHz\n", dev_priv->czclk_freq);
 223 }
 224
 225 static inline u32 /* units of 100MHz */
 226 intel_fdi_link_freq(struct drm_device *dev)
 227 {
 228         if (IS_GEN5(dev)) {
 229                 struct drm_i915_private *dev_priv = dev->dev_private;
 230                 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
 231         } else
 232                 return 27;
 233 }
 234
 235 static const intel_limit_t intel_limits_i8xx_dac = {
 236         .dot = { .min = 25000, .max = 350000 },
 237         .vco = { .min = 908000, .max = 1512000 },
 238         .n = { .min = 2, .max = 16 },
 239         .m = { .min = 96, .max = 140 },
 240         .m1 = { .min = 18, .max = 26 },
 241         .m2 = { .min = 6, .max = 16 },
 242         .p = { .min = 4, .max = 128 },
 243         .p1 = { .min = 2, .max = 33 },
 244         .p2 = { .dot_limit = 165000,
 245                 .p2_slow = 4, .p2_fast = 2 },
 246 };
 247
 248 static const intel_limit_t intel_limits_i8xx_dvo = {
 249         .dot = { .min = 25000, .max = 350000 },
 250         .vco = { .min = 908000, .max = 1512000 },
 251         .n = { .min = 2, .max = 16 },
 252         .m = { .min = 96, .max = 140 },
 253         .m1 = { .min = 18, .max = 26 },
 254         .m2 = { .min = 6, .max = 16 },
 255         .p = { .min = 4, .max = 128 },
 256         .p1 = { .min = 2, .max = 33 },
 257         .p2 = { .dot_limit = 165000,
 258                 .p2_slow = 4, .p2_fast = 4 },
 259 };
 260
 261 static const intel_limit_t intel_limits_i8xx_lvds = {
 262         .dot = { .min = 25000, .max = 350000 },
 263         .vco = { .min = 908000, .max = 1512000 },
 264         .n = { .min = 2, .max = 16 },
 265         .m = { .min = 96, .max = 140 },
 266         .m1 = { .min = 18, .max = 26 },
 267         .m2 = { .min = 6, .max = 16 },
 268         .p = { .min = 4, .max = 128 },
 269         .p1 = { .min = 1, .max = 6 },
 270         .p2 = { .dot_limit = 165000,
 271                 .p2_slow = 14, .p2_fast = 7 },
 272 };
 273
 274 static const intel_limit_t intel_limits_i9xx_sdvo = {
 275         .dot = { .min = 20000, .max = 400000 },
 276         .vco = { .min = 1400000, .max = 2800000 },
 277         .n = { .min = 1, .max = 6 },
 278         .m = { .min = 70, .max = 120 },
 279         .m1 = { .min = 8, .max = 18 },
 280         .m2 = { .min = 3, .max = 7 },
 281         .p = { .min = 5, .max = 80 },
 282         .p1 = { .min = 1, .max = 8 },
 283         .p2 = { .dot_limit = 200000,
 284                 .p2_slow = 10, .p2_fast = 5 },
 285 };
 286
 287 static const intel_limit_t intel_limits_i9xx_lvds = {
 288         .dot = { .min = 20000, .max = 400000 },
 289         .vco = { .min = 1400000, .max = 2800000 },
 290         .n = { .min = 1, .max = 6 },
 291         .m = { .min = 70, .max = 120 },
 292         .m1 = { .min = 8, .max = 18 },
 293         .m2 = { .min = 3, .max = 7 },
 294         .p = { .min = 7, .max = 98 },
 295         .p1 = { .min = 1, .max = 8 },
 296         .p2 = { .dot_limit = 112000,
 297                 .p2_slow = 14, .p2_fast = 7 },
 298 };
 299
 300
 301 static const intel_limit_t intel_limits_g4x_sdvo = {
 302         .dot = { .min = 25000, .max = 270000 },
 303         .vco = { .min = 1750000, .max = 3500000},
 304         .n = { .min = 1, .max = 4 },
 305         .m = { .min = 104, .max = 138 },
 306         .m1 = { .min = 17, .max = 23 },
 307         .m2 = { .min = 5, .max = 11 },
 308         .p = { .min = 10, .max = 30 },
 309         .p1 = { .min = 1, .max = 3},
 310         .p2 = { .dot_limit = 270000,
 311                 .p2_slow = 10,
 312                 .p2_fast = 10
 313         },
 314 };
 315
 316 static const intel_limit_t intel_limits_g4x_hdmi = {
 317         .dot = { .min = 22000, .max = 400000 },
 318         .vco = { .min = 1750000, .max = 3500000},
 319         .n = { .min = 1, .max = 4 },
 320         .m = { .min = 104, .max = 138 },
 321         .m1 = { .min = 16, .max = 23 },
 322         .m2 = { .min = 5, .max = 11 },
 323         .p = { .min = 5, .max = 80 },
 324         .p1 = { .min = 1, .max = 8},
 325         .p2 = { .dot_limit = 165000,
 326                 .p2_slow = 10, .p2_fast = 5 },
 327 };
 328
 329 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
 330         .dot = { .min = 20000, .max = 115000 },
 331         .vco = { .min = 1750000, .max = 3500000 },
 332         .n = { .min = 1, .max = 3 },
 333         .m = { .min = 104, .max = 138 },
 334         .m1 = { .min = 17, .max = 23 },
 335         .m2 = { .min = 5, .max = 11 },
 336         .p = { .min = 28, .max = 112 },
 337         .p1 = { .min = 2, .max = 8 },
 338         .p2 = { .dot_limit = 0,
 339                 .p2_slow = 14, .p2_fast = 14
 340         },
 341 };
 342
 343 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
 344         .dot = { .min = 80000, .max = 224000 },
 345         .vco = { .min = 1750000, .max = 3500000 },
 346         .n = { .min = 1, .max = 3 },
 347         .m = { .min = 104, .max = 138 },
 348         .m1 = { .min = 17, .max = 23 },
 349         .m2 = { .min = 5, .max = 11 },
 350         .p = { .min = 14, .max = 42 },
 351         .p1 = { .min = 2, .max = 6 },
 352         .p2 = { .dot_limit = 0,
 353                 .p2_slow = 7, .p2_fast = 7
 354         },
 355 };
 356
 357 static const intel_limit_t intel_limits_pineview_sdvo = {
 358         .dot = { .min = 20000, .max = 400000},
 359         .vco = { .min = 1700000, .max = 3500000 },
 360         /* Pineview's Ncounter is a ring counter */
 361         .n = { .min = 3, .max = 6 },
 362         .m = { .min = 2, .max = 256 },
 363         /* Pineview only has one combined m divider, which we treat as m2. */
 364         .m1 = { .min = 0, .max = 0 },
 365         .m2 = { .min = 0, .max = 254 },
 366         .p = { .min = 5, .max = 80 },
 367         .p1 = { .min = 1, .max = 8 },
 368         .p2 = { .dot_limit = 200000,
 369                 .p2_slow = 10, .p2_fast = 5 },
 370 };
 371
 372 static const intel_limit_t intel_limits_pineview_lvds = {
 373         .dot = { .min = 20000, .max = 400000 },
 374         .vco = { .min = 1700000, .max = 3500000 },
 375         .n = { .min = 3, .max = 6 },
 376         .m = { .min = 2, .max = 256 },
 377         .m1 = { .min = 0, .max = 0 },
 378         .m2 = { .min = 0, .max = 254 },
 379         .p = { .min = 7, .max = 112 },
 380         .p1 = { .min = 1, .max = 8 },
 381         .p2 = { .dot_limit = 112000,
 382                 .p2_slow = 14, .p2_fast = 14 },
 383 };
 384
 385 /* Ironlake / Sandybridge
 386  *
 387  * We calculate clock using (register_value + 2) for N/M1/M2, so here
 388  * the range value for them is (actual_value - 2).
 389  */
 390 static const intel_limit_t intel_limits_ironlake_dac = {
 391         .dot = { .min = 25000, .max = 350000 },
 392         .vco = { .min = 1760000, .max = 3510000 },
 393         .n = { .min = 1, .max = 5 },
 394         .m = { .min = 79, .max = 127 },
 395         .m1 = { .min = 12, .max = 22 },
 396         .m2 = { .min = 5, .max = 9 },
 397         .p = { .min = 5, .max = 80 },
 398         .p1 = { .min = 1, .max = 8 },
 399         .p2 = { .dot_limit = 225000,
 400                 .p2_slow = 10, .p2_fast = 5 },
 401 };
 402
 403 static const intel_limit_t intel_limits_ironlake_single_lvds = {
 404         .dot = { .min = 25000, .max = 350000 },
 405         .vco = { .min = 1760000, .max = 3510000 },
 406         .n = { .min = 1, .max = 3 },
 407         .m = { .min = 79, .max = 118 },
 408         .m1 = { .min = 12, .max = 22 },
 409         .m2 = { .min = 5, .max = 9 },
 410         .p = { .min = 28, .max = 112 },
 411         .p1 = { .min = 2, .max = 8 },
 412         .p2 = { .dot_limit = 225000,
 413                 .p2_slow = 14, .p2_fast = 14 },
 414 };
 415
 416 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
 417         .dot = { .min = 25000, .max = 350000 },
 418         .vco = { .min = 1760000, .max = 3510000 },
 419         .n = { .min = 1, .max = 3 },
 420         .m = { .min = 79, .max = 127 },
 421         .m1 = { .min = 12, .max = 22 },
 422         .m2 = { .min = 5, .max = 9 },
 423         .p = { .min = 14, .max = 56 },
 424         .p1 = { .min = 2, .max = 8 },
 425         .p2 = { .dot_limit = 225000,
 426                 .p2_slow = 7, .p2_fast = 7 },
 427 };
 428
 429 /* LVDS 100mhz refclk limits. */
 430 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
 431         .dot = { .min = 25000, .max = 350000 },
 432         .vco = { .min = 1760000, .max = 3510000 },
 433         .n = { .min = 1, .max = 2 },
 434         .m = { .min = 79, .max = 126 },
 435         .m1 = { .min = 12, .max = 22 },
 436         .m2 = { .min = 5, .max = 9 },
 437         .p = { .min = 28, .max = 112 },
 438         .p1 = { .min = 2, .max = 8 },
 439         .p2 = { .dot_limit = 225000,
 440                 .p2_slow = 14, .p2_fast = 14 },
 441 };
 442
 443 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
 444         .dot = { .min = 25000, .max = 350000 },
 445         .vco = { .min = 1760000, .max = 3510000 },
 446         .n = { .min = 1, .max = 3 },
 447         .m = { .min = 79, .max = 126 },
 448         .m1 = { .min = 12, .max = 22 },
 449         .m2 = { .min = 5, .max = 9 },
 450         .p = { .min = 14, .max = 42 },
 451         .p1 = { .min = 2, .max = 6 },
 452         .p2 = { .dot_limit = 225000,
 453                 .p2_slow = 7, .p2_fast = 7 },
 454 };
 455
 456 static const intel_limit_t intel_limits_vlv = {
 457          /*
 458           * These are the data rate limits (measured in fast clocks)
 459           * since those are the strictest limits we have. The fast
 460           * clock and actual rate limits are more relaxed, so checking
 461           * them would make no difference.
 462           */
 463         .dot = { .min = 25000 * 5, .max = 270000 * 5 },
 464         .vco = { .min = 4000000, .max = 6000000 },
 465         .n = { .min = 1, .max = 7 },
 466         .m1 = { .min = 2, .max = 3 },
 467         .m2 = { .min = 11, .max = 156 },
 468         .p1 = { .min = 2, .max = 3 },
 469         .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
 470 };
 471
 472 static const intel_limit_t intel_limits_chv = {
 473         /*
 474          * These are the data rate limits (measured in fast clocks)
 475          * since those are the strictest limits we have.  The fast
 476          * clock and actual rate limits are more relaxed, so checking
 477          * them would make no difference.
 478          */
 479         .dot = { .min = 25000 * 5, .max = 540000 * 5},
 480         .vco = { .min = 4800000, .max = 6480000 },
 481         .n = { .min = 1, .max = 1 },
 482         .m1 = { .min = 2, .max = 2 },
 483         .m2 = { .min = 24 << 22, .max = 175 << 22 },
 484         .p1 = { .min = 2, .max = 4 },
 485         .p2 = { .p2_slow = 1, .p2_fast = 14 },
 486 };
 487
 488 static const intel_limit_t intel_limits_bxt = {
 489         /* FIXME: find real dot limits */
 490         .dot = { .min = 0, .max = INT_MAX },
 491         .vco = { .min = 4800000, .max = 6700000 },
 492         .n = { .min = 1, .max = 1 },
 493         .m1 = { .min = 2, .max = 2 },
 494         /* FIXME: find real m2 limits */
 495         .m2 = { .min = 2 << 22, .max = 255 << 22 },
 496         .p1 = { .min = 2, .max = 4 },
 497         .p2 = { .p2_slow = 1, .p2_fast = 20 },
 498 };
 499
 500 static bool
 501 needs_modeset(struct drm_crtc_state *state)
 502 {
 503         return drm_atomic_crtc_needs_modeset(state);
 504 }
 505
 506 /**
 507  * Returns whether any output on the specified pipe is of the specified type
 508  */
 509 bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type)
 510 {
 511         struct drm_device *dev = crtc->base.dev;
 512         struct intel_encoder *encoder;
 513
 514         for_each_encoder_on_crtc(dev, &crtc->base, encoder)
 515                 if (encoder->type == type)
 516                         return true;
 517
 518         return false;
 519 }
 520
 521 /**
 522  * Returns whether any output on the specified pipe will have the specified
 523  * type after a staged modeset is complete, i.e., the same as
 524  * intel_pipe_has_type() but looking at encoder->new_crtc instead of
 525  * encoder->crtc.
 526  */
 527 static bool intel_pipe_will_have_type(const struct intel_crtc_state *crtc_state,
 528                                       int type)
 529 {
 530         struct drm_atomic_state *state = crtc_state->base.state;
 531         struct drm_connector *connector;
 532         struct drm_connector_state *connector_state;
 533         struct intel_encoder *encoder;
 534         int i, num_connectors = 0;
 535
 536         for_each_connector_in_state(state, connector, connector_state, i) {
 537                 if (connector_state->crtc != crtc_state->base.crtc)
 538                         continue;
 539
 540                 num_connectors++;
 541
 542                 encoder = to_intel_encoder(connector_state->best_encoder);
 543                 if (encoder->type == type)
 544                         return true;
 545         }
 546
 547         WARN_ON(num_connectors == 0);
 548
 549         return false;
 550 }
 551
 552 static const intel_limit_t *
 553 intel_ironlake_limit(struct intel_crtc_state *crtc_state, int refclk)
 554 {
 555         struct drm_device *dev = crtc_state->base.crtc->dev;
 556         const intel_limit_t *limit;
 557
 558         if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
 559                 if (intel_is_dual_link_lvds(dev)) {
 560                         if (refclk == 100000)
 561                                 limit = &intel_limits_ironlake_dual_lvds_100m;
 562                         else
 563                                 limit = &intel_limits_ironlake_dual_lvds;
 564                 } else {
 565                         if (refclk == 100000)
 566                                 limit = &intel_limits_ironlake_single_lvds_100m;
 567                         else
 568                                 limit = &intel_limits_ironlake_single_lvds;
 569                 }
 570         } else
 571                 limit = &intel_limits_ironlake_dac;
 572
 573         return limit;
 574 }
 575
 576 static const intel_limit_t *
 577 intel_g4x_limit(struct intel_crtc_state *crtc_state)
 578 {
 579         struct drm_device *dev = crtc_state->base.crtc->dev;
 580         const intel_limit_t *limit;
 581
 582         if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
 583                 if (intel_is_dual_link_lvds(dev))
 584                         limit = &intel_limits_g4x_dual_channel_lvds;
 585                 else
 586                         limit = &intel_limits_g4x_single_channel_lvds;
 587         } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI) ||
 588                    intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
 589                 limit = &intel_limits_g4x_hdmi;
 590         } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO)) {
 591                 limit = &intel_limits_g4x_sdvo;
 592         } else /* The option is for other outputs */
 593                 limit = &intel_limits_i9xx_sdvo;
 594
 595         return limit;
 596 }
 597
 598 static const intel_limit_t *
 599 intel_limit(struct intel_crtc_state *crtc_state, int refclk)
 600 {
 601         struct drm_device *dev = crtc_state->base.crtc->dev;
 602         const intel_limit_t *limit;
 603
 604         if (IS_BROXTON(dev))
 605                 limit = &intel_limits_bxt;
 606         else if (HAS_PCH_SPLIT(dev))
 607                 limit = intel_ironlake_limit(crtc_state, refclk);
 608         else if (IS_G4X(dev)) {
 609                 limit = intel_g4x_limit(crtc_state);
 610         } else if (IS_PINEVIEW(dev)) {
 611                 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
 612                         limit = &intel_limits_pineview_lvds;
 613                 else
 614                         limit = &intel_limits_pineview_sdvo;
 615         } else if (IS_CHERRYVIEW(dev)) {
 616                 limit = &intel_limits_chv;
 617         } else if (IS_VALLEYVIEW(dev)) {
 618                 limit = &intel_limits_vlv;
 619         } else if (!IS_GEN2(dev)) {
 620                 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
 621                         limit = &intel_limits_i9xx_lvds;
 622                 else
 623                         limit = &intel_limits_i9xx_sdvo;
 624         } else {
 625                 if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
 626                         limit = &intel_limits_i8xx_lvds;
 627                 else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
 628                         limit = &intel_limits_i8xx_dvo;
 629                 else
 630                         limit = &intel_limits_i8xx_dac;
 631         }
 632         return limit;
 633 }
 634
 635 /*
 636  * Platform specific helpers to calculate the port PLL loopback- (clock.m),
 637  * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
 638  * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
 639  * The helpers' return value is the rate of the clock that is fed to the
 640  * display engine's pipe which can be the above fast dot clock rate or a
 641  * divided-down version of it.
 642  */
 643 /* m1 is reserved as 0 in Pineview, n is a ring counter */
 644 static int pnv_calc_dpll_params(int refclk, intel_clock_t *clock)
 645 {
 646         clock->m = clock->m2 + 2;
 647         clock->p = clock->p1 * clock->p2;
 648         if (WARN_ON(clock->n == 0 || clock->p == 0))
 649                 return 0;
 650         clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
 651         clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
 652
 653         return clock->dot;
 654 }
 655
 656 static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
 657 {
 658         return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
 659 }
 660
 661 static int i9xx_calc_dpll_params(int refclk, intel_clock_t *clock)
 662 {
 663         clock->m = i9xx_dpll_compute_m(clock);
 664         clock->p = clock->p1 * clock->p2;
 665         if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
 666                 return 0;
 667         clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
 668         clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
 669
 670         return clock->dot;
 671 }
 672
 673 static int vlv_calc_dpll_params(int refclk, intel_clock_t *clock)
 674 {
 675         clock->m = clock->m1 * clock->m2;
 676         clock->p = clock->p1 * clock->p2;
 677         if (WARN_ON(clock->n == 0 || clock->p == 0))
 678                 return 0;
 679         clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
 680         clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
 681
 682         return clock->dot / 5;
 683 }
 684
 685 int chv_calc_dpll_params(int refclk, intel_clock_t *clock)
 686 {
 687         clock->m = clock->m1 * clock->m2;
 688         clock->p = clock->p1 * clock->p2;
 689         if (WARN_ON(clock->n == 0 || clock->p == 0))
 690                 return 0;
 691         clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
 692                         clock->n << 22);
 693         clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
 694
 695         return clock->dot / 5;
 696 }
 697
 698 #define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
 699 /**
 700  * Returns whether the given set of divisors are valid for a given refclk with
 701  * the given connectors.
 702  */
 703
 704 static bool intel_PLL_is_valid(struct drm_device *dev,
 705                                const intel_limit_t *limit,
 706                                const intel_clock_t *clock)
 707 {
 708         if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
 709                 INTELPllInvalid("n out of range\n");
 710         if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
 711                 INTELPllInvalid("p1 out of range\n");
 712         if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
 713                 INTELPllInvalid("m2 out of range\n");
 714         if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
 715                 INTELPllInvalid("m1 out of range\n");
 716
 717         if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev) && !IS_BROXTON(dev))
 718                 if (clock->m1 <= clock->m2)
 719                         INTELPllInvalid("m1 <= m2\n");
 720
 721         if (!IS_VALLEYVIEW(dev) && !IS_BROXTON(dev)) {
 722                 if (clock->p < limit->p.min || limit->p.max < clock->p)
 723                         INTELPllInvalid("p out of range\n");
 724                 if (clock->m < limit->m.min || limit->m.max < clock->m)
 725                         INTELPllInvalid("m out of range\n");
 726         }
 727
 728         if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
 729                 INTELPllInvalid("vco out of range\n");
 730         /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
 731          * connector, etc., rather than just a single range.
 732          */
 733         if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
 734                 INTELPllInvalid("dot out of range\n");
 735
 736         return true;
 737 }
 738
 739 static int
 740 i9xx_select_p2_div(const intel_limit_t *limit,
 741                    const struct intel_crtc_state *crtc_state,
 742                    int target)
 743 {
 744         struct drm_device *dev = crtc_state->base.crtc->dev;
 745
 746         if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
 747                 /*
 748                  * For LVDS just rely on its current settings for dual-channel.
 749                  * We haven't figured out how to reliably set up different
 750                  * single/dual channel state, if we even can.
 751                  */
 752                 if (intel_is_dual_link_lvds(dev))
 753                         return limit->p2.p2_fast;
 754                 else
 755                         return limit->p2.p2_slow;
 756         } else {
 757                 if (target < limit->p2.dot_limit)
 758                         return limit->p2.p2_slow;
 759                 else
 760                         return limit->p2.p2_fast;
 761         }
 762 }
 763
 764 static bool
 765 i9xx_find_best_dpll(const intel_limit_t *limit,
 766                     struct intel_crtc_state *crtc_state,
 767                     int target, int refclk, intel_clock_t *match_clock,
 768                     intel_clock_t *best_clock)
 769 {
 770         struct drm_device *dev = crtc_state->base.crtc->dev;
 771         intel_clock_t clock;
 772         int err = target;
 773
 774         memset(best_clock, 0, sizeof(*best_clock));
 775
 776         clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
 777
 778         for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
 779              clock.m1++) {
 780                 for (clock.m2 = limit->m2.min;
 781                      clock.m2 <= limit->m2.max; clock.m2++) {
 782                         if (clock.m2 >= clock.m1)
 783                                 break;
 784                         for (clock.n = limit->n.min;
 785                              clock.n <= limit->n.max; clock.n++) {
 786                                 for (clock.p1 = limit->p1.min;
 787                                         clock.p1 <= limit->p1.max; clock.p1++) {
 788                                         int this_err;
 789
 790                                         i9xx_calc_dpll_params(refclk, &clock);
 791                                         if (!intel_PLL_is_valid(dev, limit,
 792                                                                 &clock))
 793                                                 continue;
 794                                         if (match_clock &&
 795                                             clock.p != match_clock->p)
 796                                                 continue;
 797
 798                                         this_err = abs(clock.dot - target);
 799                                         if (this_err < err) {
 800                                                 *best_clock = clock;
 801                                                 err = this_err;
 802                                         }
 803                                 }
 804                         }
 805                 }
 806         }
 807
 808         return (err != target);
 809 }
 810
 811 static bool
 812 pnv_find_best_dpll(const intel_limit_t *limit,
 813                    struct intel_crtc_state *crtc_state,
 814                    int target, int refclk, intel_clock_t *match_clock,
 815                    intel_clock_t *best_clock)
 816 {
 817         struct drm_device *dev = crtc_state->base.crtc->dev;
 818         intel_clock_t clock;
 819         int err = target;
 820
 821         memset(best_clock, 0, sizeof(*best_clock));
 822
 823         clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
 824
 825         for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
 826              clock.m1++) {
 827                 for (clock.m2 = limit->m2.min;
 828                      clock.m2 <= limit->m2.max; clock.m2++) {
 829                         for (clock.n = limit->n.min;
 830                              clock.n <= limit->n.max; clock.n++) {
 831                                 for (clock.p1 = limit->p1.min;
 832                                         clock.p1 <= limit->p1.max; clock.p1++) {
 833                                         int this_err;
 834
 835                                         pnv_calc_dpll_params(refclk, &clock);
 836                                         if (!intel_PLL_is_valid(dev, limit,
 837                                                                 &clock))
 838                                                 continue;
 839                                         if (match_clock &&
 840                                             clock.p != match_clock->p)
 841                                                 continue;
 842
 843                                         this_err = abs(clock.dot - target);
 844                                         if (this_err < err) {
 845                                                 *best_clock = clock;
 846                                                 err = this_err;
 847                                         }
 848                                 }
 849                         }
 850                 }
 851         }
 852
 853         return (err != target);
 854 }
 855
 856 static bool
 857 g4x_find_best_dpll(const intel_limit_t *limit,
 858                    struct intel_crtc_state *crtc_state,
 859                    int target, int refclk, intel_clock_t *match_clock,
 860                    intel_clock_t *best_clock)
 861 {
 862         struct drm_device *dev = crtc_state->base.crtc->dev;
 863         intel_clock_t clock;
 864         int max_n;
 865         bool found = false;
 866         /* approximately equals target * 0.00585 */
 867         int err_most = (target >> 8) + (target >> 9);
 868
 869         memset(best_clock, 0, sizeof(*best_clock));
 870
 871         clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
 872
 873         max_n = limit->n.max;
 874         /* based on hardware requirement, prefer smaller n to precision */
 875         for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
 876                 /* based on hardware requirement, prefere larger m1,m2 */
 877                 for (clock.m1 = limit->m1.max;
 878                      clock.m1 >= limit->m1.min; clock.m1--) {
 879                         for (clock.m2 = limit->m2.max;
 880                              clock.m2 >= limit->m2.min; clock.m2--) {
 881                                 for (clock.p1 = limit->p1.max;
 882                                      clock.p1 >= limit->p1.min; clock.p1--) {
 883                                         int this_err;
 884
 885                                         i9xx_calc_dpll_params(refclk, &clock);
 886                                         if (!intel_PLL_is_valid(dev, limit,
 887                                                                 &clock))
 888                                                 continue;
 889
 890                                         this_err = abs(clock.dot - target);
 891                                         if (this_err < err_most) {
 892                                                 *best_clock = clock;
 893                                                 err_most = this_err;
 894                                                 max_n = clock.n;
 895                                                 found = true;
 896                                         }
 897                                 }
 898                         }
 899                 }
 900         }
 901         return found;
 902 }
 903
 904 /*
 905  * Check if the calculated PLL configuration is more optimal compared to the
 906  * best configuration and error found so far. Return the calculated error.
 907  */
 908 static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
 909                                const intel_clock_t *calculated_clock,
 910                                const intel_clock_t *best_clock,
 911                                unsigned int best_error_ppm,
 912                                unsigned int *error_ppm)
 913 {
 914         /*
 915          * For CHV ignore the error and consider only the P value.
 916          * Prefer a bigger P value based on HW requirements.
 917          */
 918         if (IS_CHERRYVIEW(dev)) {
 919                 *error_ppm = 0;
 920
 921                 return calculated_clock->p > best_clock->p;
 922         }
 923
 924         if (WARN_ON_ONCE(!target_freq))
 925                 return false;
 926
 927         *error_ppm = div_u64(1000000ULL *
 928                                 abs(target_freq - calculated_clock->dot),
 929                              target_freq);
 930         /*
 931          * Prefer a better P value over a better (smaller) error if the error
 932          * is small. Ensure this preference for future configurations too by
 933          * setting the error to 0.
 934          */
 935         if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
 936                 *error_ppm = 0;
 937
 938                 return true;
 939         }
 940
 941         return *error_ppm + 10 < best_error_ppm;
 942 }
 943
 944 static bool
 945 vlv_find_best_dpll(const intel_limit_t *limit,
 946                    struct intel_crtc_state *crtc_state,
 947                    int target, int refclk, intel_clock_t *match_clock,
 948                    intel_clock_t *best_clock)
 949 {
 950         struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
 951         struct drm_device *dev = crtc->base.dev;
 952         intel_clock_t clock;
 953         unsigned int bestppm = 1000000;
 954         /* min update 19.2 MHz */
 955         int max_n = min(limit->n.max, refclk / 19200);
 956         bool found = false;
 957
 958         target *= 5; /* fast clock */
 959
 960         memset(best_clock, 0, sizeof(*best_clock));
 961
 962         /* based on hardware requirement, prefer smaller n to precision */
 963         for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
 964                 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
 965                         for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
 966                              clock.p2 -= clock.p2 > 10 ? 2 : 1) {
 967                                 clock.p = clock.p1 * clock.p2;
 968                                 /* based on hardware requirement, prefer bigger m1,m2 values */
 969                                 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
 970                                         unsigned int ppm;
 971
 972                                         clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
 973                                                                      refclk * clock.m1);
 974
 975                                         vlv_calc_dpll_params(refclk, &clock);
 976
 977                                         if (!intel_PLL_is_valid(dev, limit,
 978                                                                 &clock))
 979                                                 continue;
 980
 981                                         if (!vlv_PLL_is_optimal(dev, target,
 982                                                                 &clock,
 983                                                                 best_clock,
 984                                                                 bestppm, &ppm))
 985                                                 continue;
 986
 987                                         *best_clock = clock;
 988                                         bestppm = ppm;
 989                                         found = true;
 990                                 }
 991                         }
 992                 }
 993         }
 994
 995         return found;
 996 }
 997
 998 static bool
 999 chv_find_best_dpll(const intel_limit_t *limit,
1000                    struct intel_crtc_state *crtc_state,
1001                    int target, int refclk, intel_clock_t *match_clock,
1002                    intel_clock_t *best_clock)
1003 {
1004         struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
1005         struct drm_device *dev = crtc->base.dev;
1006         unsigned int best_error_ppm;
1007         intel_clock_t clock;
1008         uint64_t m2;
1009         int found = false;
1010
1011         memset(best_clock, 0, sizeof(*best_clock));
1012         best_error_ppm = 1000000;
1013
1014         /*
1015          * Based on hardware doc, the n always set to 1, and m1 always
1016          * set to 2.  If requires to support 200Mhz refclk, we need to
1017          * revisit this because n may not 1 anymore.
1018          */
1019         clock.n = 1, clock.m1 = 2;
1020         target *= 5;    /* fast clock */
1021
1022         for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
1023                 for (clock.p2 = limit->p2.p2_fast;
1024                                 clock.p2 >= limit->p2.p2_slow;
1025                                 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
1026                         unsigned int error_ppm;
1027
1028                         clock.p = clock.p1 * clock.p2;
1029
1030                         m2 = DIV_ROUND_CLOSEST_ULL(((uint64_t)target * clock.p *
1031                                         clock.n) << 22, refclk * clock.m1);
1032
1033                         if (m2 > INT_MAX/clock.m1)
1034                                 continue;
1035
1036                         clock.m2 = m2;
1037
1038                         chv_calc_dpll_params(refclk, &clock);
1039
1040                         if (!intel_PLL_is_valid(dev, limit, &clock))
1041                                 continue;
1042
1043                         if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
1044                                                 best_error_ppm, &error_ppm))
1045                                 continue;
1046
1047                         *best_clock = clock;
1048                         best_error_ppm = error_ppm;
1049                         found = true;
1050                 }
1051         }
1052
1053         return found;
1054 }
1055
1056 bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
1057                         intel_clock_t *best_clock)
1058 {
1059         int refclk = i9xx_get_refclk(crtc_state, 0);
1060
1061         return chv_find_best_dpll(intel_limit(crtc_state, refclk), crtc_state,
1062                                   target_clock, refclk, NULL, best_clock);
1063 }
1064
1065 bool intel_crtc_active(struct drm_crtc *crtc)
1066 {
1067         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1068
1069         /* Be paranoid as we can arrive here with only partial
1070          * state retrieved from the hardware during setup.
1071          *
1072          * We can ditch the adjusted_mode.crtc_clock check as soon
1073          * as Haswell has gained clock readout/fastboot support.
1074          *
1075          * We can ditch the crtc->primary->fb check as soon as we can
1076          * properly reconstruct framebuffers.
1077          *
1078          * FIXME: The intel_crtc->active here should be switched to
1079          * crtc->state->active once we have proper CRTC states wired up
1080          * for atomic.
1081          */
1082         return intel_crtc->active && crtc->primary->state->fb &&
1083                 intel_crtc->config->base.adjusted_mode.crtc_clock;
1084 }
1085
1086 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
1087                                              enum pipe pipe)
1088 {
1089         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1090         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1091
1092         return intel_crtc->config->cpu_transcoder;
1093 }
1094
1095 static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe)
1096 {
1097         struct drm_i915_private *dev_priv = dev->dev_private;
1098         u32 reg = PIPEDSL(pipe);
1099         u32 line1, line2;
1100         u32 line_mask;
1101
1102         if (IS_GEN2(dev))
1103                 line_mask = DSL_LINEMASK_GEN2;
1104         else
1105                 line_mask = DSL_LINEMASK_GEN3;
1106
1107         line1 = I915_READ(reg) & line_mask;
1108         msleep(5);
1109         line2 = I915_READ(reg) & line_mask;
1110
1111         return line1 == line2;
1112 }
1113
1114 /*
1115  * intel_wait_for_pipe_off - wait for pipe to turn off
1116  * @crtc: crtc whose pipe to wait for
1117  *
1118  * After disabling a pipe, we can't wait for vblank in the usual way,
1119  * spinning on the vblank interrupt status bit, since we won't actually
1120  * see an interrupt when the pipe is disabled.
1121  *
1122  * On Gen4 and above:
1123  *   wait for the pipe register state bit to turn off
1124  *
1125  * Otherwise:
1126  *   wait for the display line value to settle (it usually
1127  *   ends up stopping at the start of the next frame).
1128  *
1129  */
1130 static void intel_wait_for_pipe_off(struct intel_crtc *crtc)
1131 {
1132         struct drm_device *dev = crtc->base.dev;
1133         struct drm_i915_private *dev_priv = dev->dev_private;
1134         enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
1135         enum pipe pipe = crtc->pipe;
1136
1137         if (INTEL_INFO(dev)->gen >= 4) {
1138                 int reg = PIPECONF(cpu_transcoder);
1139
1140                 /* Wait for the Pipe State to go off */
1141                 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
1142                              100))
1143                         WARN(1, "pipe_off wait timed out\n");
1144         } else {
1145                 /* Wait for the display line to settle */
1146                 if (wait_for(pipe_dsl_stopped(dev, pipe), 100))
1147                         WARN(1, "pipe_off wait timed out\n");
1148         }
1149 }
1150
1151 static const char *state_string(bool enabled)
1152 {
1153         return enabled ? "on" : "off";
1154 }
1155
1156 /* Only for pre-ILK configs */
1157 void assert_pll(struct drm_i915_private *dev_priv,
1158                 enum pipe pipe, bool state)
1159 {
1160         u32 val;
1161         bool cur_state;
1162
1163         val = I915_READ(DPLL(pipe));
1164         cur_state = !!(val & DPLL_VCO_ENABLE);
1165         I915_STATE_WARN(cur_state != state,
1166              "PLL state assertion failure (expected %s, current %s)\n",
1167              state_string(state), state_string(cur_state));
1168 }
1169
1170 /* XXX: the dsi pll is shared between MIPI DSI ports */
1171 static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
1172 {
1173         u32 val;
1174         bool cur_state;
1175
1176         mutex_lock(&dev_priv->sb_lock);
1177         val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
1178         mutex_unlock(&dev_priv->sb_lock);
1179
1180         cur_state = val & DSI_PLL_VCO_EN;
1181         I915_STATE_WARN(cur_state != state,
1182              "DSI PLL state assertion failure (expected %s, current %s)\n",
1183              state_string(state), state_string(cur_state));
1184 }
1185 #define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
1186 #define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)
1187
1188 struct intel_shared_dpll *
1189 intel_crtc_to_shared_dpll(struct intel_crtc *crtc)
1190 {
1191         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
1192
1193         if (crtc->config->shared_dpll < 0)
1194                 return NULL;
1195
1196         return &dev_priv->shared_dplls[crtc->config->shared_dpll];
1197 }
1198
1199 /* For ILK+ */
1200 void assert_shared_dpll(struct drm_i915_private *dev_priv,
1201                         struct intel_shared_dpll *pll,
1202                         bool state)
1203 {
1204         bool cur_state;
1205         struct intel_dpll_hw_state hw_state;
1206
1207         if (WARN (!pll,
1208                   "asserting DPLL %s with no DPLL\n", state_string(state)))
1209                 return;
1210
1211         cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
1212         I915_STATE_WARN(cur_state != state,
1213              "%s assertion failure (expected %s, current %s)\n",
1214              pll->name, state_string(state), state_string(cur_state));
1215 }
1216
1217 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
1218                           enum pipe pipe, bool state)
1219 {
1220         bool cur_state;
1221         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1222                                                                       pipe);
1223
1224         if (HAS_DDI(dev_priv->dev)) {
1225                 /* DDI does not have a specific FDI_TX register */
1226                 u32 val = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
1227                 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
1228         } else {
1229                 u32 val = I915_READ(FDI_TX_CTL(pipe));
1230                 cur_state = !!(val & FDI_TX_ENABLE);
1231         }
1232         I915_STATE_WARN(cur_state != state,
1233              "FDI TX state assertion failure (expected %s, current %s)\n",
1234              state_string(state), state_string(cur_state));
1235 }
1236 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1237 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1238
1239 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1240                           enum pipe pipe, bool state)
1241 {
1242         u32 val;
1243         bool cur_state;
1244
1245         val = I915_READ(FDI_RX_CTL(pipe));
1246         cur_state = !!(val & FDI_RX_ENABLE);
1247         I915_STATE_WARN(cur_state != state,
1248              "FDI RX state assertion failure (expected %s, current %s)\n",
1249              state_string(state), state_string(cur_state));
1250 }
1251 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1252 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1253
1254 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1255                                       enum pipe pipe)
1256 {
1257         u32 val;
1258
1259         /* ILK FDI PLL is always enabled */
1260         if (INTEL_INFO(dev_priv->dev)->gen == 5)
1261                 return;
1262
1263         /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1264         if (HAS_DDI(dev_priv->dev))
1265                 return;
1266
1267         val = I915_READ(FDI_TX_CTL(pipe));
1268         I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1269 }
1270
1271 void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
1272                        enum pipe pipe, bool state)
1273 {
1274         u32 val;
1275         bool cur_state;
1276
1277         val = I915_READ(FDI_RX_CTL(pipe));
1278         cur_state = !!(val & FDI_RX_PLL_ENABLE);
1279         I915_STATE_WARN(cur_state != state,
1280              "FDI RX PLL assertion failure (expected %s, current %s)\n",
1281              state_string(state), state_string(cur_state));
1282 }
1283
1284 void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1285                            enum pipe pipe)
1286 {
1287         struct drm_device *dev = dev_priv->dev;
1288         int pp_reg;
1289         u32 val;
1290         enum pipe panel_pipe = PIPE_A;
1291         bool locked = true;
1292
1293         if (WARN_ON(HAS_DDI(dev)))
1294                 return;
1295
1296         if (HAS_PCH_SPLIT(dev)) {
1297                 u32 port_sel;
1298
1299                 pp_reg = PCH_PP_CONTROL;
1300                 port_sel = I915_READ(PCH_PP_ON_DELAYS) & PANEL_PORT_SELECT_MASK;
1301
1302                 if (port_sel == PANEL_PORT_SELECT_LVDS &&
1303                     I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
1304                         panel_pipe = PIPE_B;
1305                 /* XXX: else fix for eDP */
1306         } else if (IS_VALLEYVIEW(dev)) {
1307                 /* presumably write lock depends on pipe, not port select */
1308                 pp_reg = VLV_PIPE_PP_CONTROL(pipe);
1309                 panel_pipe = pipe;
1310         } else {
1311                 pp_reg = PP_CONTROL;
1312                 if (I915_READ(LVDS) & LVDS_PIPEB_SELECT)
1313                         panel_pipe = PIPE_B;
1314         }
1315
1316         val = I915_READ(pp_reg);
1317         if (!(val & PANEL_POWER_ON) ||
1318             ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
1319                 locked = false;
1320
1321         I915_STATE_WARN(panel_pipe == pipe && locked,
1322              "panel assertion failure, pipe %c regs locked\n",
1323              pipe_name(pipe));
1324 }
1325
1326 static void assert_cursor(struct drm_i915_private *dev_priv,
1327                           enum pipe pipe, bool state)
1328 {
1329         struct drm_device *dev = dev_priv->dev;
1330         bool cur_state;
1331
1332         if (IS_845G(dev) || IS_I865G(dev))
1333                 cur_state = I915_READ(CURCNTR(PIPE_A)) & CURSOR_ENABLE;
1334         else
1335                 cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
1336
1337         I915_STATE_WARN(cur_state != state,
1338              "cursor on pipe %c assertion failure (expected %s, current %s)\n",
1339              pipe_name(pipe), state_string(state), state_string(cur_state));
1340 }
1341 #define assert_cursor_enabled(d, p) assert_cursor(d, p, true)
1342 #define assert_cursor_disabled(d, p) assert_cursor(d, p, false)
1343
1344 void assert_pipe(struct drm_i915_private *dev_priv,
1345                  enum pipe pipe, bool state)
1346 {
1347         bool cur_state;
1348         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1349                                                                       pipe);
1350
1351         /* if we need the pipe quirk it must be always on */
1352         if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
1353             (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
1354                 state = true;
1355
1356         if (!intel_display_power_is_enabled(dev_priv,
1357                                 POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
1358                 cur_state = false;
1359         } else {
1360                 u32 val = I915_READ(PIPECONF(cpu_transcoder));
1361                 cur_state = !!(val & PIPECONF_ENABLE);
1362         }
1363
1364         I915_STATE_WARN(cur_state != state,
1365              "pipe %c assertion failure (expected %s, current %s)\n",
1366              pipe_name(pipe), state_string(state), state_string(cur_state));
1367 }
1368
1369 static void assert_plane(struct drm_i915_private *dev_priv,
1370                          enum plane plane, bool state)
1371 {
1372         u32 val;
1373         bool cur_state;
1374
1375         val = I915_READ(DSPCNTR(plane));
1376         cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1377         I915_STATE_WARN(cur_state != state,
1378              "plane %c assertion failure (expected %s, current %s)\n",
1379              plane_name(plane), state_string(state), state_string(cur_state));
1380 }
1381
1382 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1383 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1384
1385 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1386                                    enum pipe pipe)
1387 {
1388         struct drm_device *dev = dev_priv->dev;
1389         int i;
1390
1391         /* Primary planes are fixed to pipes on gen4+ */
1392         if (INTEL_INFO(dev)->gen >= 4) {
1393                 u32 val = I915_READ(DSPCNTR(pipe));
1394                 I915_STATE_WARN(val & DISPLAY_PLANE_ENABLE,
1395                      "plane %c assertion failure, should be disabled but not\n",
1396                      plane_name(pipe));
1397                 return;
1398         }
1399
1400         /* Need to check both planes against the pipe */
1401         for_each_pipe(dev_priv, i) {
1402                 u32 val = I915_READ(DSPCNTR(i));
1403                 enum pipe cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1404                         DISPPLANE_SEL_PIPE_SHIFT;
1405                 I915_STATE_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1406                      "plane %c assertion failure, should be off on pipe %c but is still active\n",
1407                      plane_name(i), pipe_name(pipe));
1408         }
1409 }
1410
1411 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1412                                     enum pipe pipe)
1413 {
1414         struct drm_device *dev = dev_priv->dev;
1415         int sprite;
1416
1417         if (INTEL_INFO(dev)->gen >= 9) {
1418                 for_each_sprite(dev_priv, pipe, sprite) {
1419                         u32 val = I915_READ(PLANE_CTL(pipe, sprite));
1420                         I915_STATE_WARN(val & PLANE_CTL_ENABLE,
1421                              "plane %d assertion failure, should be off on pipe %c but is still active\n",
1422                              sprite, pipe_name(pipe));
1423                 }
1424         } else if (IS_VALLEYVIEW(dev)) {
1425                 for_each_sprite(dev_priv, pipe, sprite) {
1426                         u32 val = I915_READ(SPCNTR(pipe, sprite));
1427                         I915_STATE_WARN(val & SP_ENABLE,
1428                              "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1429                              sprite_name(pipe, sprite), pipe_name(pipe));
1430                 }
1431         } else if (INTEL_INFO(dev)->gen >= 7) {
1432                 u32 val = I915_READ(SPRCTL(pipe));
1433                 I915_STATE_WARN(val & SPRITE_ENABLE,
1434                      "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1435                      plane_name(pipe), pipe_name(pipe));
1436         } else if (INTEL_INFO(dev)->gen >= 5) {
1437                 u32 val = I915_READ(DVSCNTR(pipe));
1438                 I915_STATE_WARN(val & DVS_ENABLE,
1439                      "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1440                      plane_name(pipe), pipe_name(pipe));
1441         }
1442 }
1443
1444 static void assert_vblank_disabled(struct drm_crtc *crtc)
1445 {
1446         if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
1447                 drm_crtc_vblank_put(crtc);
1448 }
1449
1450 static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
1451 {
1452         u32 val;
1453         bool enabled;
1454
1455         I915_STATE_WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
1456
1457         val = I915_READ(PCH_DREF_CONTROL);
1458         enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1459                             DREF_SUPERSPREAD_SOURCE_MASK));
1460         I915_STATE_WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
1461 }
1462
1463 static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
1464                                            enum pipe pipe)
1465 {
1466         u32 val;
1467         bool enabled;
1468
1469         val = I915_READ(PCH_TRANSCONF(pipe));
1470         enabled = !!(val & TRANS_ENABLE);
1471         I915_STATE_WARN(enabled,
1472              "transcoder assertion failed, should be off on pipe %c but is still active\n",
1473              pipe_name(pipe));
1474 }
1475
1476 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1477                             enum pipe pipe, u32 port_sel, u32 val)
1478 {
1479         if ((val & DP_PORT_EN) == 0)
1480                 return false;
1481
1482         if (HAS_PCH_CPT(dev_priv->dev)) {
1483                 u32     trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1484                 u32     trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1485                 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1486                         return false;
1487         } else if (IS_CHERRYVIEW(dev_priv->dev)) {
1488                 if ((val & DP_PIPE_MASK_CHV) != DP_PIPE_SELECT_CHV(pipe))
1489                         return false;
1490         } else {
1491                 if ((val & DP_PIPE_MASK) != (pipe << 30))
1492                         return false;
1493         }
1494         return true;
1495 }
1496
1497 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1498                               enum pipe pipe, u32 val)
1499 {
1500         if ((val & SDVO_ENABLE) == 0)
1501                 return false;
1502
1503         if (HAS_PCH_CPT(dev_priv->dev)) {
1504                 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1505                         return false;
1506         } else if (IS_CHERRYVIEW(dev_priv->dev)) {
1507                 if ((val & SDVO_PIPE_SEL_MASK_CHV) != SDVO_PIPE_SEL_CHV(pipe))
1508                         return false;
1509         } else {
1510                 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1511                         return false;
1512         }
1513         return true;
1514 }
1515
1516 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1517                               enum pipe pipe, u32 val)
1518 {
1519         if ((val & LVDS_PORT_EN) == 0)
1520                 return false;
1521
1522         if (HAS_PCH_CPT(dev_priv->dev)) {
1523                 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1524                         return false;
1525         } else {
1526                 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1527                         return false;
1528         }
1529         return true;
1530 }
1531
1532 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1533                               enum pipe pipe, u32 val)
1534 {
1535         if ((val & ADPA_DAC_ENABLE) == 0)
1536                 return false;
1537         if (HAS_PCH_CPT(dev_priv->dev)) {
1538                 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1539                         return false;
1540         } else {
1541                 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1542                         return false;
1543         }
1544         return true;
1545 }
1546
1547 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1548                                    enum pipe pipe, int reg, u32 port_sel)
1549 {
1550         u32 val = I915_READ(reg);
1551         I915_STATE_WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1552              "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1553              reg, pipe_name(pipe));
1554
1555         I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
1556              && (val & DP_PIPEB_SELECT),
1557              "IBX PCH dp port still using transcoder B\n");
1558 }
1559
1560 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1561                                      enum pipe pipe, int reg)
1562 {
1563         u32 val = I915_READ(reg);
1564         I915_STATE_WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1565              "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1566              reg, pipe_name(pipe));
1567
1568         I915_STATE_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
1569              && (val & SDVO_PIPE_B_SELECT),
1570              "IBX PCH hdmi port still using transcoder B\n");
1571 }
1572
1573 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1574                                       enum pipe pipe)
1575 {
1576         u32 val;
1577
1578         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1579         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1580         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1581
1582         val = I915_READ(PCH_ADPA);
1583         I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1584              "PCH VGA enabled on transcoder %c, should be disabled\n",
1585              pipe_name(pipe));
1586
1587         val = I915_READ(PCH_LVDS);
1588         I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1589              "PCH LVDS enabled on transcoder %c, should be disabled\n",
1590              pipe_name(pipe));
1591
1592         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1593         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1594         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1595 }
1596
1597 static void vlv_enable_pll(struct intel_crtc *crtc,
1598                            const struct intel_crtc_state *pipe_config)
1599 {
1600         struct drm_device *dev = crtc->base.dev;
1601         struct drm_i915_private *dev_priv = dev->dev_private;
1602         int reg = DPLL(crtc->pipe);
1603         u32 dpll = pipe_config->dpll_hw_state.dpll;
1604
1605         assert_pipe_disabled(dev_priv, crtc->pipe);
1606
1607         /* No really, not for ILK+ */
1608         BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
1609
1610         /* PLL is protected by panel, make sure we can write it */
1611         if (IS_MOBILE(dev_priv->dev))
1612                 assert_panel_unlocked(dev_priv, crtc->pipe);
1613
1614         I915_WRITE(reg, dpll);
1615         POSTING_READ(reg);
1616         udelay(150);
1617
1618         if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1619                 DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe);
1620
1621         I915_WRITE(DPLL_MD(crtc->pipe), pipe_config->dpll_hw_state.dpll_md);
1622         POSTING_READ(DPLL_MD(crtc->pipe));
1623
1624         /* We do this three times for luck */
1625         I915_WRITE(reg, dpll);
1626         POSTING_READ(reg);
1627         udelay(150); /* wait for warmup */
1628         I915_WRITE(reg, dpll);
1629         POSTING_READ(reg);
1630         udelay(150); /* wait for warmup */
1631         I915_WRITE(reg, dpll);
1632         POSTING_READ(reg);
1633         udelay(150); /* wait for warmup */
1634 }
1635
1636 static void chv_enable_pll(struct intel_crtc *crtc,
1637                            const struct intel_crtc_state *pipe_config)
1638 {
1639         struct drm_device *dev = crtc->base.dev;
1640         struct drm_i915_private *dev_priv = dev->dev_private;
1641         int pipe = crtc->pipe;
1642         enum dpio_channel port = vlv_pipe_to_channel(pipe);
1643         u32 tmp;
1644
1645         assert_pipe_disabled(dev_priv, crtc->pipe);
1646
1647         BUG_ON(!IS_CHERRYVIEW(dev_priv->dev));
1648
1649         mutex_lock(&dev_priv->sb_lock);
1650
1651         /* Enable back the 10bit clock to display controller */
1652         tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1653         tmp |= DPIO_DCLKP_EN;
1654         vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
1655
1656         mutex_unlock(&dev_priv->sb_lock);
1657
1658         /*
1659          * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
1660          */
1661         udelay(1);
1662
1663         /* Enable PLL */
1664         I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
1665
1666         /* Check PLL is locked */
1667         if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1668                 DRM_ERROR("PLL %d failed to lock\n", pipe);
1669
1670         /* not sure when this should be written */
1671         I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
1672         POSTING_READ(DPLL_MD(pipe));
1673 }
1674
1675 static int intel_num_dvo_pipes(struct drm_device *dev)
1676 {
1677         struct intel_crtc *crtc;
1678         int count = 0;
1679
1680         for_each_intel_crtc(dev, crtc)
1681                 count += crtc->base.state->active &&
1682                         intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
1683
1684         return count;
1685 }
1686
1687 static void i9xx_enable_pll(struct intel_crtc *crtc)
1688 {
1689         struct drm_device *dev = crtc->base.dev;
1690         struct drm_i915_private *dev_priv = dev->dev_private;
1691         int reg = DPLL(crtc->pipe);
1692         u32 dpll = crtc->config->dpll_hw_state.dpll;
1693
1694         assert_pipe_disabled(dev_priv, crtc->pipe);
1695
1696         /* No really, not for ILK+ */
1697         BUG_ON(INTEL_INFO(dev)->gen >= 5);
1698
1699         /* PLL is protected by panel, make sure we can write it */
1700         if (IS_MOBILE(dev) && !IS_I830(dev))
1701                 assert_panel_unlocked(dev_priv, crtc->pipe);
1702
1703         /* Enable DVO 2x clock on both PLLs if necessary */
1704         if (IS_I830(dev) && intel_num_dvo_pipes(dev) > 0) {
1705                 /*
1706                  * It appears to be important that we don't enable this
1707                  * for the current pipe before otherwise configuring the
1708                  * PLL. No idea how this should be handled if multiple
1709                  * DVO outputs are enabled simultaneosly.
1710                  */
1711                 dpll |= DPLL_DVO_2X_MODE;
1712                 I915_WRITE(DPLL(!crtc->pipe),
1713                            I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
1714         }
1715
1716         /*
1717          * Apparently we need to have VGA mode enabled prior to changing
1718          * the P1/P2 dividers. Otherwise the DPLL will keep using the old
1719          * dividers, even though the register value does change.
1720          */
1721         I915_WRITE(reg, 0);
1722
1723         I915_WRITE(reg, dpll);
1724
1725         /* Wait for the clocks to stabilize. */
1726         POSTING_READ(reg);
1727         udelay(150);
1728
1729         if (INTEL_INFO(dev)->gen >= 4) {
1730                 I915_WRITE(DPLL_MD(crtc->pipe),
1731                            crtc->config->dpll_hw_state.dpll_md);
1732         } else {
1733                 /* The pixel multiplier can only be updated once the
1734                  * DPLL is enabled and the clocks are stable.
1735                  *
1736                  * So write it again.
1737                  */
1738                 I915_WRITE(reg, dpll);
1739         }
1740
1741         /* We do this three times for luck */
1742         I915_WRITE(reg, dpll);
1743         POSTING_READ(reg);
1744         udelay(150); /* wait for warmup */
1745         I915_WRITE(reg, dpll);
1746         POSTING_READ(reg);
1747         udelay(150); /* wait for warmup */
1748         I915_WRITE(reg, dpll);
1749         POSTING_READ(reg);
1750         udelay(150); /* wait for warmup */
1751 }
1752
1753 /**
1754  * i9xx_disable_pll - disable a PLL
1755  * @dev_priv: i915 private structure
1756  * @pipe: pipe PLL to disable
1757  *
1758  * Disable the PLL for @pipe, making sure the pipe is off first.
1759  *
1760  * Note!  This is for pre-ILK only.
1761  */
1762 static void i9xx_disable_pll(struct intel_crtc *crtc)
1763 {
1764         struct drm_device *dev = crtc->base.dev;
1765         struct drm_i915_private *dev_priv = dev->dev_private;
1766         enum pipe pipe = crtc->pipe;
1767
1768         /* Disable DVO 2x clock on both PLLs if necessary */
1769         if (IS_I830(dev) &&
1770             intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
1771             !intel_num_dvo_pipes(dev)) {
1772                 I915_WRITE(DPLL(PIPE_B),
1773                            I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
1774                 I915_WRITE(DPLL(PIPE_A),
1775                            I915_READ(DPLL(PIPE_A)) & ~DPLL_DVO_2X_MODE);
1776         }
1777
1778         /* Don't disable pipe or pipe PLLs if needed */
1779         if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
1780             (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
1781                 return;
1782
1783         /* Make sure the pipe isn't still relying on us */
1784         assert_pipe_disabled(dev_priv, pipe);
1785
1786         I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS);
1787         POSTING_READ(DPLL(pipe));
1788 }
1789
1790 static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1791 {
1792         u32 val;
1793
1794         /* Make sure the pipe isn't still relying on us */
1795         assert_pipe_disabled(dev_priv, pipe);
1796
1797         /*
1798          * Leave integrated clock source and reference clock enabled for pipe B.
1799          * The latter is needed for VGA hotplug / manual detection.
1800          */
1801         val = DPLL_VGA_MODE_DIS;
1802         if (pipe == PIPE_B)
1803                 val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REF_CLK_ENABLE_VLV;
1804         I915_WRITE(DPLL(pipe), val);
1805         POSTING_READ(DPLL(pipe));
1806
1807 }
1808
1809 static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1810 {
1811         enum dpio_channel port = vlv_pipe_to_channel(pipe);
1812         u32 val;
1813
1814         /* Make sure the pipe isn't still relying on us */
1815         assert_pipe_disabled(dev_priv, pipe);
1816
1817         /* Set PLL en = 0 */
1818         val = DPLL_SSC_REF_CLK_CHV |
1819                 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
1820         if (pipe != PIPE_A)
1821                 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
1822         I915_WRITE(DPLL(pipe), val);
1823         POSTING_READ(DPLL(pipe));
1824
1825         mutex_lock(&dev_priv->sb_lock);
1826
1827         /* Disable 10bit clock to display controller */
1828         val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1829         val &= ~DPIO_DCLKP_EN;
1830         vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
1831
1832         mutex_unlock(&dev_priv->sb_lock);
1833 }
1834
1835 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
1836                          struct intel_digital_port *dport,
1837                          unsigned int expected_mask)
1838 {
1839         u32 port_mask;
1840         int dpll_reg;
1841
1842         switch (dport->port) {
1843         case PORT_B:
1844                 port_mask = DPLL_PORTB_READY_MASK;
1845                 dpll_reg = DPLL(0);
1846                 break;
1847         case PORT_C:
1848                 port_mask = DPLL_PORTC_READY_MASK;
1849                 dpll_reg = DPLL(0);
1850                 expected_mask <<= 4;
1851                 break;
1852         case PORT_D:
1853                 port_mask = DPLL_PORTD_READY_MASK;
1854                 dpll_reg = DPIO_PHY_STATUS;
1855                 break;
1856         default:
1857                 BUG();
1858         }
1859
1860         if (wait_for((I915_READ(dpll_reg) & port_mask) == expected_mask, 1000))
1861                 WARN(1, "timed out waiting for port %c ready: got 0x%x, expected 0x%x\n",
1862                      port_name(dport->port), I915_READ(dpll_reg) & port_mask, expected_mask);
1863 }
1864
1865 static void intel_prepare_shared_dpll(struct intel_crtc *crtc)
1866 {
1867         struct drm_device *dev = crtc->base.dev;
1868         struct drm_i915_private *dev_priv = dev->dev_private;
1869         struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1870
1871         if (WARN_ON(pll == NULL))
1872                 return;
1873
1874         WARN_ON(!pll->config.crtc_mask);
1875         if (pll->active == 0) {
1876                 DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
1877                 WARN_ON(pll->on);
1878                 assert_shared_dpll_disabled(dev_priv, pll);
1879
1880                 pll->mode_set(dev_priv, pll);
1881         }
1882 }
1883
1884 /**
1885  * intel_enable_shared_dpll - enable PCH PLL
1886  * @dev_priv: i915 private structure
1887  * @pipe: pipe PLL to enable
1888  *
1889  * The PCH PLL needs to be enabled before the PCH transcoder, since it
1890  * drives the transcoder clock.
1891  */
1892 static void intel_enable_shared_dpll(struct intel_crtc *crtc)
1893 {
1894         struct drm_device *dev = crtc->base.dev;
1895         struct drm_i915_private *dev_priv = dev->dev_private;
1896         struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1897
1898         if (WARN_ON(pll == NULL))
1899                 return;
1900
1901         if (WARN_ON(pll->config.crtc_mask == 0))
1902                 return;
1903
1904         DRM_DEBUG_KMS("enable %s (active %d, on? %d) for crtc %d\n",
1905                       pll->name, pll->active, pll->on,
1906                       crtc->base.base.id);
1907
1908         if (pll->active++) {
1909                 WARN_ON(!pll->on);
1910                 assert_shared_dpll_enabled(dev_priv, pll);
1911                 return;
1912         }
1913         WARN_ON(pll->on);
1914
1915         intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
1916
1917         DRM_DEBUG_KMS("enabling %s\n", pll->name);
1918         pll->enable(dev_priv, pll);
1919         pll->on = true;
1920 }
1921
1922 static void intel_disable_shared_dpll(struct intel_crtc *crtc)
1923 {
1924         struct drm_device *dev = crtc->base.dev;
1925         struct drm_i915_private *dev_priv = dev->dev_private;
1926         struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1927
1928         /* PCH only available on ILK+ */
1929         if (INTEL_INFO(dev)->gen < 5)
1930                 return;
1931
1932         if (pll == NULL)
1933                 return;
1934
1935         if (WARN_ON(!(pll->config.crtc_mask & (1 << drm_crtc_index(&crtc->base)))))
1936                 return;
1937
1938         DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
1939                       pll->name, pll->active, pll->on,
1940                       crtc->base.base.id);
1941
1942         if (WARN_ON(pll->active == 0)) {
1943                 assert_shared_dpll_disabled(dev_priv, pll);
1944                 return;
1945         }
1946
1947         assert_shared_dpll_enabled(dev_priv, pll);
1948         WARN_ON(!pll->on);
1949         if (--pll->active)
1950                 return;
1951
1952         DRM_DEBUG_KMS("disabling %s\n", pll->name);
1953         pll->disable(dev_priv, pll);
1954         pll->on = false;
1955
1956         intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
1957 }
1958
1959 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1960                                            enum pipe pipe)
1961 {
1962         struct drm_device *dev = dev_priv->dev;
1963         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1964         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1965         uint32_t reg, val, pipeconf_val;
1966
1967         /* PCH only available on ILK+ */
1968         BUG_ON(!HAS_PCH_SPLIT(dev));
1969
1970         /* Make sure PCH DPLL is enabled */
1971         assert_shared_dpll_enabled(dev_priv,
1972                                    intel_crtc_to_shared_dpll(intel_crtc));
1973
1974         /* FDI must be feeding us bits for PCH ports */
1975         assert_fdi_tx_enabled(dev_priv, pipe);
1976         assert_fdi_rx_enabled(dev_priv, pipe);
1977
1978         if (HAS_PCH_CPT(dev)) {
1979                 /* Workaround: Set the timing override bit before enabling the
1980                  * pch transcoder. */
1981                 reg = TRANS_CHICKEN2(pipe);
1982                 val = I915_READ(reg);
1983                 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1984                 I915_WRITE(reg, val);
1985         }
1986
1987         reg = PCH_TRANSCONF(pipe);
1988         val = I915_READ(reg);
1989         pipeconf_val = I915_READ(PIPECONF(pipe));
1990
1991         if (HAS_PCH_IBX(dev_priv->dev)) {
1992                 /*
1993                  * Make the BPC in transcoder be consistent with
1994                  * that in pipeconf reg. For HDMI we must use 8bpc
1995                  * here for both 8bpc and 12bpc.
1996                  */
1997                 val &= ~PIPECONF_BPC_MASK;
1998                 if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_HDMI))
1999                         val |= PIPECONF_8BPC;
2000                 else
2001                         val |= pipeconf_val & PIPECONF_BPC_MASK;
2002         }
2003
2004         val &= ~TRANS_INTERLACE_MASK;
2005         if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
2006                 if (HAS_PCH_IBX(dev_priv->dev) &&
2007                     intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
2008                         val |= TRANS_LEGACY_INTERLACED_ILK;
2009                 else
2010                         val |= TRANS_INTERLACED;
2011         else
2012                 val |= TRANS_PROGRESSIVE;
2013
2014         I915_WRITE(reg, val | TRANS_ENABLE);
2015         if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
2016                 DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
2017 }
2018
2019 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
2020                                       enum transcoder cpu_transcoder)
2021 {
2022         u32 val, pipeconf_val;
2023
2024         /* PCH only available on ILK+ */
2025         BUG_ON(!HAS_PCH_SPLIT(dev_priv->dev));
2026
2027         /* FDI must be feeding us bits for PCH ports */
2028         assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
2029         assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
2030
2031         /* Workaround: set timing override bit. */
2032         val = I915_READ(TRANS_CHICKEN2(PIPE_A));
2033         val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
2034         I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
2035
2036         val = TRANS_ENABLE;
2037         pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
2038
2039         if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
2040             PIPECONF_INTERLACED_ILK)
2041                 val |= TRANS_INTERLACED;
2042         else
2043                 val |= TRANS_PROGRESSIVE;
2044
2045         I915_WRITE(LPT_TRANSCONF, val);
2046         if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
2047                 DRM_ERROR("Failed to enable PCH transcoder\n");
2048 }
2049
2050 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
2051                                             enum pipe pipe)
2052 {
2053         struct drm_device *dev = dev_priv->dev;
2054         uint32_t reg, val;
2055
2056         /* FDI relies on the transcoder */
2057         assert_fdi_tx_disabled(dev_priv, pipe);
2058         assert_fdi_rx_disabled(dev_priv, pipe);
2059
2060         /* Ports must be off as well */
2061         assert_pch_ports_disabled(dev_priv, pipe);
2062
2063         reg = PCH_TRANSCONF(pipe);
2064         val = I915_READ(reg);
2065         val &= ~TRANS_ENABLE;
2066         I915_WRITE(reg, val);
2067         /* wait for PCH transcoder off, transcoder state */
2068         if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
2069                 DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
2070
2071         if (!HAS_PCH_IBX(dev)) {
2072                 /* Workaround: Clear the timing override chicken bit again. */
2073                 reg = TRANS_CHICKEN2(pipe);
2074                 val = I915_READ(reg);
2075                 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
2076                 I915_WRITE(reg, val);
2077         }
2078 }
2079
2080 static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
2081 {
2082         u32 val;
2083
2084         val = I915_READ(LPT_TRANSCONF);
2085         val &= ~TRANS_ENABLE;
2086         I915_WRITE(LPT_TRANSCONF, val);
2087         /* wait for PCH transcoder off, transcoder state */
2088         if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
2089                 DRM_ERROR("Failed to disable PCH transcoder\n");
2090
2091         /* Workaround: clear timing override bit. */
2092         val = I915_READ(TRANS_CHICKEN2(PIPE_A));
2093         val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
2094         I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
2095 }
2096
2097 /**
2098  * intel_enable_pipe - enable a pipe, asserting requirements
2099  * @crtc: crtc responsible for the pipe
2100  *
2101  * Enable @crtc's pipe, making sure that various hardware specific requirements
2102  * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
2103  */
2104 static void intel_enable_pipe(struct intel_crtc *crtc)
2105 {
2106         struct drm_device *dev = crtc->base.dev;
2107         struct drm_i915_private *dev_priv = dev->dev_private;
2108         enum pipe pipe = crtc->pipe;
2109         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
2110                                                                       pipe);
2111         enum pipe pch_transcoder;
2112         int reg;
2113         u32 val;
2114
2115         DRM_DEBUG_KMS("enabling pipe %c\n", pipe_name(pipe));
2116
2117         assert_planes_disabled(dev_priv, pipe);
2118         assert_cursor_disabled(dev_priv, pipe);
2119         assert_sprites_disabled(dev_priv, pipe);
2120
2121         if (HAS_PCH_LPT(dev_priv->dev))
2122                 pch_transcoder = TRANSCODER_A;
2123         else
2124                 pch_transcoder = pipe;
2125
2126         /*
2127          * A pipe without a PLL won't actually be able to drive bits from
2128          * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
2129          * need the check.
2130          */
2131         if (HAS_GMCH_DISPLAY(dev_priv->dev))
2132                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
2133                         assert_dsi_pll_enabled(dev_priv);
2134                 else
2135                         assert_pll_enabled(dev_priv, pipe);
2136         else {
2137                 if (crtc->config->has_pch_encoder) {
2138                         /* if driving the PCH, we need FDI enabled */
2139                         assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
2140                         assert_fdi_tx_pll_enabled(dev_priv,
2141                                                   (enum pipe) cpu_transcoder);
2142                 }
2143                 /* FIXME: assert CPU port conditions for SNB+ */
2144         }
2145
2146         reg = PIPECONF(cpu_transcoder);
2147         val = I915_READ(reg);
2148         if (val & PIPECONF_ENABLE) {
2149                 WARN_ON(!((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
2150                           (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE)));
2151                 return;
2152         }
2153
2154         I915_WRITE(reg, val | PIPECONF_ENABLE);
2155         POSTING_READ(reg);
2156 }
2157
2158 /**
2159  * intel_disable_pipe - disable a pipe, asserting requirements
2160  * @crtc: crtc whose pipes is to be disabled
2161  *
2162  * Disable the pipe of @crtc, making sure that various hardware
2163  * specific requirements are met, if applicable, e.g. plane
2164  * disabled, panel fitter off, etc.
2165  *
2166  * Will wait until the pipe has shut down before returning.
2167  */
2168 static void intel_disable_pipe(struct intel_crtc *crtc)
2169 {
2170         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
2171         enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
2172         enum pipe pipe = crtc->pipe;
2173         int reg;
2174         u32 val;
2175
2176         DRM_DEBUG_KMS("disabling pipe %c\n", pipe_name(pipe));
2177
2178         /*
2179          * Make sure planes won't keep trying to pump pixels to us,
2180          * or we might hang the display.
2181          */
2182         assert_planes_disabled(dev_priv, pipe);
2183         assert_cursor_disabled(dev_priv, pipe);
2184         assert_sprites_disabled(dev_priv, pipe);
2185
2186         reg = PIPECONF(cpu_transcoder);
2187         val = I915_READ(reg);
2188         if ((val & PIPECONF_ENABLE) == 0)
2189                 return;
2190
2191         /*
2192          * Double wide has implications for planes
2193          * so best keep it disabled when not needed.
2194          */
2195         if (crtc->config->double_wide)
2196                 val &= ~PIPECONF_DOUBLE_WIDE;
2197
2198         /* Don't disable pipe or pipe PLLs if needed */
2199         if (!(pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) &&
2200             !(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
2201                 val &= ~PIPECONF_ENABLE;
2202
2203         I915_WRITE(reg, val);
2204         if ((val & PIPECONF_ENABLE) == 0)
2205                 intel_wait_for_pipe_off(crtc);
2206 }
2207
2208 static bool need_vtd_wa(struct drm_device *dev)
2209 {
2210 #ifdef CONFIG_INTEL_IOMMU
2211         if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
2212                 return true;
2213 #endif
2214         return false;
2215 }
2216
2217 unsigned int
2218 intel_tile_height(struct drm_device *dev, uint32_t pixel_format,
2219                   uint64_t fb_format_modifier, unsigned int plane)
2220 {
2221         unsigned int tile_height;
2222         uint32_t pixel_bytes;
2223
2224         switch (fb_format_modifier) {
2225         case DRM_FORMAT_MOD_NONE:
2226                 tile_height = 1;
2227                 break;
2228         case I915_FORMAT_MOD_X_TILED:
2229                 tile_height = IS_GEN2(dev) ? 16 : 8;
2230                 break;
2231         case I915_FORMAT_MOD_Y_TILED:
2232                 tile_height = 32;
2233                 break;
2234         case I915_FORMAT_MOD_Yf_TILED:
2235                 pixel_bytes = drm_format_plane_cpp(pixel_format, plane);
2236                 switch (pixel_bytes) {
2237                 default:
2238                 case 1:
2239                         tile_height = 64;
2240                         break;
2241                 case 2:
2242                 case 4:
2243                         tile_height = 32;
2244                         break;
2245                 case 8:
2246                         tile_height = 16;
2247                         break;
2248                 case 16:
2249                         WARN_ONCE(1,
2250                                   "128-bit pixels are not supported for display!");
2251                         tile_height = 16;
2252                         break;
2253                 }
2254                 break;
2255         default:
2256                 MISSING_CASE(fb_format_modifier);
2257                 tile_height = 1;
2258                 break;
2259         }
2260
2261         return tile_height;
2262 }
2263
2264 unsigned int
2265 intel_fb_align_height(struct drm_device *dev, unsigned int height,
2266                       uint32_t pixel_format, uint64_t fb_format_modifier)
2267 {
2268         return ALIGN(height, intel_tile_height(dev, pixel_format,
2269                                                fb_format_modifier, 0));
2270 }
2271
2272 static int
2273 intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb,
2274                         const struct drm_plane_state *plane_state)
2275 {
2276         struct intel_rotation_info *info = &view->rotation_info;
2277         unsigned int tile_height, tile_pitch;
2278
2279         *view = i915_ggtt_view_normal;
2280
2281         if (!plane_state)
2282                 return 0;
2283
2284         if (!intel_rotation_90_or_270(plane_state->rotation))
2285                 return 0;
2286
2287         *view = i915_ggtt_view_rotated;
2288
2289         info->height = fb->height;
2290         info->pixel_format = fb->pixel_format;
2291         info->pitch = fb->pitches[0];
2292         info->uv_offset = fb->offsets[1];
2293         info->fb_modifier = fb->modifier[0];
2294
2295         tile_height = intel_tile_height(fb->dev, fb->pixel_format,
2296                                         fb->modifier[0], 0);
2297         tile_pitch = PAGE_SIZE / tile_height;
2298         info->width_pages = DIV_ROUND_UP(fb->pitches[0], tile_pitch);
2299         info->height_pages = DIV_ROUND_UP(fb->height, tile_height);
2300         info->size = info->width_pages * info->height_pages * PAGE_SIZE;
2301
2302         if (info->pixel_format == DRM_FORMAT_NV12) {
2303                 tile_height = intel_tile_height(fb->dev, fb->pixel_format,
2304                                                 fb->modifier[0], 1);
2305                 tile_pitch = PAGE_SIZE / tile_height;
2306                 info->width_pages_uv = DIV_ROUND_UP(fb->pitches[0], tile_pitch);
2307                 info->height_pages_uv = DIV_ROUND_UP(fb->height / 2,
2308                                                      tile_height);
2309                 info->size_uv = info->width_pages_uv * info->height_pages_uv *
2310                                 PAGE_SIZE;
2311         }
2312
2313         return 0;
2314 }
2315
2316 static unsigned int intel_linear_alignment(struct drm_i915_private *dev_priv)
2317 {
2318         if (INTEL_INFO(dev_priv)->gen >= 9)
2319                 return 256 * 1024;
2320         else if (IS_BROADWATER(dev_priv) || IS_CRESTLINE(dev_priv) ||
2321                  IS_VALLEYVIEW(dev_priv))
2322                 return 128 * 1024;
2323         else if (INTEL_INFO(dev_priv)->gen >= 4)
2324                 return 4 * 1024;
2325         else
2326                 return 0;
2327 }
2328
2329 int
2330 intel_pin_and_fence_fb_obj(struct drm_plane *plane,
2331                            struct drm_framebuffer *fb,
2332                            const struct drm_plane_state *plane_state,
2333                            struct intel_engine_cs *pipelined,
2334                            struct drm_i915_gem_request **pipelined_request)
2335 {
2336         struct drm_device *dev = fb->dev;
2337         struct drm_i915_private *dev_priv = dev->dev_private;
2338         struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2339         struct i915_ggtt_view view;
2340         u32 alignment;
2341         int ret;
2342
2343         WARN_ON(!mutex_is_locked(&dev->struct_mutex));
2344
2345         switch (fb->modifier[0]) {
2346         case DRM_FORMAT_MOD_NONE:
2347                 alignment = intel_linear_alignment(dev_priv);
2348                 break;
2349         case I915_FORMAT_MOD_X_TILED:
2350                 if (INTEL_INFO(dev)->gen >= 9)
2351                         alignment = 256 * 1024;
2352                 else {
2353                         /* pin() will align the object as required by fence */
2354                         alignment = 0;
2355                 }
2356                 break;
2357         case I915_FORMAT_MOD_Y_TILED:
2358         case I915_FORMAT_MOD_Yf_TILED:
2359                 if (WARN_ONCE(INTEL_INFO(dev)->gen < 9,
2360                           "Y tiling bo slipped through, driver bug!\n"))
2361                         return -EINVAL;
2362                 alignment = 1 * 1024 * 1024;
2363                 break;
2364         default:
2365                 MISSING_CASE(fb->modifier[0]);
2366                 return -EINVAL;
2367         }
2368
2369         ret = intel_fill_fb_ggtt_view(&view, fb, plane_state);
2370         if (ret)
2371                 return ret;
2372
2373         /* Note that the w/a also requires 64 PTE of padding following the
2374          * bo. We currently fill all unused PTE with the shadow page and so
2375          * we should always have valid PTE following the scanout preventing
2376          * the VT-d warning.
2377          */
2378         if (need_vtd_wa(dev) && alignment < 256 * 1024)
2379                 alignment = 256 * 1024;
2380
2381         /*
2382          * Global gtt pte registers are special registers which actually forward
2383          * writes to a chunk of system memory. Which means that there is no risk
2384          * that the register values disappear as soon as we call
2385          * intel_runtime_pm_put(), so it is correct to wrap only the
2386          * pin/unpin/fence and not more.
2387          */
2388         intel_runtime_pm_get(dev_priv);
2389
2390         dev_priv->mm.interruptible = false;
2391         ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined,
2392                                                    pipelined_request, &view);
2393         if (ret)
2394                 goto err_interruptible;
2395
2396         /* Install a fence for tiled scan-out. Pre-i965 always needs a
2397          * fence, whereas 965+ only requires a fence if using
2398          * framebuffer compression.  For simplicity, we always install
2399          * a fence as the cost is not that onerous.
2400          */
2401         if (view.type == I915_GGTT_VIEW_NORMAL) {
2402                 ret = i915_gem_object_get_fence(obj);
2403                 if (ret == -EDEADLK) {
2404                         /*
2405                          * -EDEADLK means there are no free fences
2406                          * no pending flips.
2407                          *
2408                          * This is propagated to atomic, but it uses
2409                          * -EDEADLK to force a locking recovery, so
2410                          * change the returned error to -EBUSY.
2411                          */
2412                         ret = -EBUSY;
2413                         goto err_unpin;
2414                 } else if (ret)
2415                         goto err_unpin;
2416
2417                 i915_gem_object_pin_fence(obj);
2418         }
2419
2420         dev_priv->mm.interruptible = true;
2421         intel_runtime_pm_put(dev_priv);
2422         return 0;
2423
2424 err_unpin:
2425         i915_gem_object_unpin_from_display_plane(obj, &view);
2426 err_interruptible:
2427         dev_priv->mm.interruptible = true;
2428         intel_runtime_pm_put(dev_priv);
2429         return ret;
2430 }
2431
2432 static void intel_unpin_fb_obj(struct drm_framebuffer *fb,
2433                                const struct drm_plane_state *plane_state)
2434 {
2435         struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2436         struct i915_ggtt_view view;
2437         int ret;
2438
2439         WARN_ON(!mutex_is_locked(&obj->base.dev->struct_mutex));
2440
2441         ret = intel_fill_fb_ggtt_view(&view, fb, plane_state);
2442         WARN_ONCE(ret, "Couldn't get view from plane state!");
2443
2444         if (view.type == I915_GGTT_VIEW_NORMAL)
2445                 i915_gem_object_unpin_fence(obj);
2446
2447         i915_gem_object_unpin_from_display_plane(obj, &view);
2448 }
2449
2450 /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
2451  * is assumed to be a power-of-two. */
2452 unsigned long intel_gen4_compute_page_offset(struct drm_i915_private *dev_priv,
2453                                              int *x, int *y,
2454                                              unsigned int tiling_mode,
2455                                              unsigned int cpp,
2456                                              unsigned int pitch)
2457 {
2458         if (tiling_mode != I915_TILING_NONE) {
2459                 unsigned int tile_rows, tiles;
2460
2461                 tile_rows = *y / 8;
2462                 *y %= 8;
2463
2464                 tiles = *x / (512/cpp);
2465                 *x %= 512/cpp;
2466
2467                 return tile_rows * pitch * 8 + tiles * 4096;
2468         } else {
2469                 unsigned int alignment = intel_linear_alignment(dev_priv) - 1;
2470                 unsigned int offset;
2471
2472                 offset = *y * pitch + *x * cpp;
2473                 *y = (offset & alignment) / pitch;
2474                 *x = ((offset & alignment) - *y * pitch) / cpp;
2475                 return offset & ~alignment;
2476         }
2477 }
2478
2479 static int i9xx_format_to_fourcc(int format)
2480 {
2481         switch (format) {
2482         case DISPPLANE_8BPP:
2483                 return DRM_FORMAT_C8;
2484         case DISPPLANE_BGRX555:
2485                 return DRM_FORMAT_XRGB1555;
2486         case DISPPLANE_BGRX565:
2487                 return DRM_FORMAT_RGB565;
2488         default:
2489         case DISPPLANE_BGRX888:
2490                 return DRM_FORMAT_XRGB8888;
2491         case DISPPLANE_RGBX888:
2492                 return DRM_FORMAT_XBGR8888;
2493         case DISPPLANE_BGRX101010:
2494                 return DRM_FORMAT_XRGB2101010;
2495         case DISPPLANE_RGBX101010:
2496                 return DRM_FORMAT_XBGR2101010;
2497         }
2498 }
2499
2500 static int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
2501 {
2502         switch (format) {
2503         case PLANE_CTL_FORMAT_RGB_565:
2504                 return DRM_FORMAT_RGB565;
2505         default:
2506         case PLANE_CTL_FORMAT_XRGB_8888:
2507                 if (rgb_order) {
2508                         if (alpha)
2509                                 return DRM_FORMAT_ABGR8888;
2510                         else
2511                                 return DRM_FORMAT_XBGR8888;
2512                 } else {
2513                         if (alpha)
2514                                 return DRM_FORMAT_ARGB8888;
2515                         else
2516                                 return DRM_FORMAT_XRGB8888;
2517                 }
2518         case PLANE_CTL_FORMAT_XRGB_2101010:
2519                 if (rgb_order)
2520                         return DRM_FORMAT_XBGR2101010;
2521                 else
2522                         return DRM_FORMAT_XRGB2101010;
2523         }
2524 }
2525
2526 static bool
2527 intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
2528                               struct intel_initial_plane_config *plane_config)
2529 {
2530         struct drm_device *dev = crtc->base.dev;
2531         struct drm_i915_private *dev_priv = to_i915(dev);
2532         struct drm_i915_gem_object *obj = NULL;
2533         struct drm_mode_fb_cmd2 mode_cmd = { 0 };
2534         struct drm_framebuffer *fb = &plane_config->fb->base;
2535         u32 base_aligned = round_down(plane_config->base, PAGE_SIZE);
2536         u32 size_aligned = round_up(plane_config->base + plane_config->size,
2537                                     PAGE_SIZE);
2538
2539         size_aligned -= base_aligned;
2540
2541         if (plane_config->size == 0)
2542                 return false;
2543
2544         /* If the FB is too big, just don't use it since fbdev is not very
2545          * important and we should probably use that space with FBC or other
2546          * features. */
2547         if (size_aligned * 2 > dev_priv->gtt.stolen_usable_size)
2548                 return false;
2549
2550         obj = i915_gem_object_create_stolen_for_preallocated(dev,
2551                                                              base_aligned,
2552                                                              base_aligned,
2553                                                              size_aligned);
2554         if (!obj)
2555                 return false;
2556
2557         obj->tiling_mode = plane_config->tiling;
2558         if (obj->tiling_mode == I915_TILING_X)
2559                 obj->stride = fb->pitches[0];
2560
2561         mode_cmd.pixel_format = fb->pixel_format;
2562         mode_cmd.width = fb->width;
2563         mode_cmd.height = fb->height;
2564         mode_cmd.pitches[0] = fb->pitches[0];
2565         mode_cmd.modifier[0] = fb->modifier[0];
2566         mode_cmd.flags = DRM_MODE_FB_MODIFIERS;
2567
2568         mutex_lock(&dev->struct_mutex);
2569         if (intel_framebuffer_init(dev, to_intel_framebuffer(fb),
2570                                    &mode_cmd, obj)) {
2571                 DRM_DEBUG_KMS("intel fb init failed\n");
2572                 goto out_unref_obj;
2573         }
2574         mutex_unlock(&dev->struct_mutex);
2575
2576         DRM_DEBUG_KMS("initial plane fb obj %p\n", obj);
2577         return true;
2578
2579 out_unref_obj:
2580         drm_gem_object_unreference(&obj->base);
2581         mutex_unlock(&dev->struct_mutex);
2582         return false;
2583 }
2584
2585 /* Update plane->state->fb to match plane->fb after driver-internal updates */
2586 static void
2587 update_state_fb(struct drm_plane *plane)
2588 {
2589         if (plane->fb == plane->state->fb)
2590                 return;
2591
2592         if (plane->state->fb)
2593                 drm_framebuffer_unreference(plane->state->fb);
2594         plane->state->fb = plane->fb;
2595         if (plane->state->fb)
2596                 drm_framebuffer_reference(plane->state->fb);
2597 }
2598
2599 static void
2600 intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
2601                              struct intel_initial_plane_config *plane_config)
2602 {
2603         struct drm_device *dev = intel_crtc->base.dev;
2604         struct drm_i915_private *dev_priv = dev->dev_private;
2605         struct drm_crtc *c;
2606         struct intel_crtc *i;
2607         struct drm_i915_gem_object *obj;
2608         struct drm_plane *primary = intel_crtc->base.primary;
2609         struct drm_plane_state *plane_state = primary->state;
2610         struct drm_framebuffer *fb;
2611
2612         if (!plane_config->fb)
2613                 return;
2614
2615         if (intel_alloc_initial_plane_obj(intel_crtc, plane_config)) {
2616                 fb = &plane_config->fb->base;
2617                 goto valid_fb;
2618         }
2619
2620         kfree(plane_config->fb);
2621
2622         /*
2623          * Failed to alloc the obj, check to see if we should share
2624          * an fb with another CRTC instead
2625          */
2626         for_each_crtc(dev, c) {
2627                 i = to_intel_crtc(c);
2628
2629                 if (c == &intel_crtc->base)
2630                         continue;
2631
2632                 if (!i->active)
2633                         continue;
2634
2635                 fb = c->primary->fb;
2636                 if (!fb)
2637                         continue;
2638
2639                 obj = intel_fb_obj(fb);
2640                 if (i915_gem_obj_ggtt_offset(obj) == plane_config->base) {
2641                         drm_framebuffer_reference(fb);
2642                         goto valid_fb;
2643                 }
2644         }
2645
2646         return;
2647
2648 valid_fb:
2649         plane_state->src_x = 0;
2650         plane_state->src_y = 0;
2651         plane_state->src_w = fb->width << 16;
2652         plane_state->src_h = fb->height << 16;
2653
2654         plane_state->crtc_x = 0;
2655         plane_state->crtc_y = 0;
2656         plane_state->crtc_w = fb->width;
2657         plane_state->crtc_h = fb->height;
2658
2659         obj = intel_fb_obj(fb);
2660         if (obj->tiling_mode != I915_TILING_NONE)
2661                 dev_priv->preserve_bios_swizzle = true;
2662
2663         drm_framebuffer_reference(fb);
2664         primary->fb = primary->state->fb = fb;
2665         primary->crtc = primary->state->crtc = &intel_crtc->base;
2666         intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
2667         obj->frontbuffer_bits |= to_intel_plane(primary)->frontbuffer_bit;
2668 }
2669
2670 static void i9xx_update_primary_plane(struct drm_crtc *crtc,
2671                                       struct drm_framebuffer *fb,
2672                                       int x, int y)
2673 {
2674         struct drm_device *dev = crtc->dev;
2675         struct drm_i915_private *dev_priv = dev->dev_private;
2676         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2677         struct drm_plane *primary = crtc->primary;
2678         bool visible = to_intel_plane_state(primary->state)->visible;
2679         struct drm_i915_gem_object *obj;
2680         int plane = intel_crtc->plane;
2681         unsigned long linear_offset;
2682         u32 dspcntr;
2683         u32 reg = DSPCNTR(plane);
2684         int pixel_size;
2685
2686         if (!visible || !fb) {
2687                 I915_WRITE(reg, 0);
2688                 if (INTEL_INFO(dev)->gen >= 4)
2689                         I915_WRITE(DSPSURF(plane), 0);
2690                 else
2691                         I915_WRITE(DSPADDR(plane), 0);
2692                 POSTING_READ(reg);
2693                 return;
2694         }
2695
2696         obj = intel_fb_obj(fb);
2697         if (WARN_ON(obj == NULL))
2698                 return;
2699
2700         pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
2701
2702         dspcntr = DISPPLANE_GAMMA_ENABLE;
2703
2704         dspcntr |= DISPLAY_PLANE_ENABLE;
2705
2706         if (INTEL_INFO(dev)->gen < 4) {
2707                 if (intel_crtc->pipe == PIPE_B)
2708                         dspcntr |= DISPPLANE_SEL_PIPE_B;
2709
2710                 /* pipesrc and dspsize control the size that is scaled from,
2711                  * which should always be the user's requested size.
2712                  */
2713                 I915_WRITE(DSPSIZE(plane),
2714                            ((intel_crtc->config->pipe_src_h - 1) << 16) |
2715                            (intel_crtc->config->pipe_src_w - 1));
2716                 I915_WRITE(DSPPOS(plane), 0);
2717         } else if (IS_CHERRYVIEW(dev) && plane == PLANE_B) {
2718                 I915_WRITE(PRIMSIZE(plane),
2719                            ((intel_crtc->config->pipe_src_h - 1) << 16) |
2720                            (intel_crtc->config->pipe_src_w - 1));
2721                 I915_WRITE(PRIMPOS(plane), 0);
2722                 I915_WRITE(PRIMCNSTALPHA(plane), 0);
2723         }
2724
2725         switch (fb->pixel_format) {
2726         case DRM_FORMAT_C8:
2727                 dspcntr |= DISPPLANE_8BPP;
2728                 break;
2729         case DRM_FORMAT_XRGB1555:
2730                 dspcntr |= DISPPLANE_BGRX555;
2731                 break;
2732         case DRM_FORMAT_RGB565:
2733                 dspcntr |= DISPPLANE_BGRX565;
2734                 break;
2735         case DRM_FORMAT_XRGB8888:
2736                 dspcntr |= DISPPLANE_BGRX888;
2737                 break;
2738         case DRM_FORMAT_XBGR8888:
2739                 dspcntr |= DISPPLANE_RGBX888;
2740                 break;
2741         case DRM_FORMAT_XRGB2101010:
2742                 dspcntr |= DISPPLANE_BGRX101010;
2743                 break;
2744         case DRM_FORMAT_XBGR2101010:
2745                 dspcntr |= DISPPLANE_RGBX101010;
2746                 break;
2747         default:
2748                 BUG();
2749         }
2750
2751         if (INTEL_INFO(dev)->gen >= 4 &&
2752             obj->tiling_mode != I915_TILING_NONE)
2753                 dspcntr |= DISPPLANE_TILED;
2754
2755         if (IS_G4X(dev))
2756                 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2757
2758         linear_offset = y * fb->pitches[0] + x * pixel_size;
2759
2760         if (INTEL_INFO(dev)->gen >= 4) {
2761                 intel_crtc->dspaddr_offset =
2762                         intel_gen4_compute_page_offset(dev_priv,
2763                                                        &x, &y, obj->tiling_mode,
2764                                                        pixel_size,
2765                                                        fb->pitches[0]);
2766                 linear_offset -= intel_crtc->dspaddr_offset;
2767         } else {
2768                 intel_crtc->dspaddr_offset = linear_offset;
2769         }
2770
2771         if (crtc->primary->state->rotation == BIT(DRM_ROTATE_180)) {
2772                 dspcntr |= DISPPLANE_ROTATE_180;
2773
2774                 x += (intel_crtc->config->pipe_src_w - 1);
2775                 y += (intel_crtc->config->pipe_src_h - 1);
2776
2777                 /* Finding the last pixel of the last line of the display
2778                 data and adding to linear_offset*/
2779                 linear_offset +=
2780                         (intel_crtc->config->pipe_src_h - 1) * fb->pitches[0] +
2781                         (intel_crtc->config->pipe_src_w - 1) * pixel_size;
2782         }
2783
2784         intel_crtc->adjusted_x = x;
2785         intel_crtc->adjusted_y = y;
2786
2787         I915_WRITE(reg, dspcntr);
2788
2789         I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2790         if (INTEL_INFO(dev)->gen >= 4) {
2791                 I915_WRITE(DSPSURF(plane),
2792                            i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2793                 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2794                 I915_WRITE(DSPLINOFF(plane), linear_offset);
2795         } else
2796                 I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset);
2797         POSTING_READ(reg);
2798 }
2799
2800 static void ironlake_update_primary_plane(struct drm_crtc *crtc,
2801                                           struct drm_framebuffer *fb,
2802                                           int x, int y)
2803 {
2804         struct drm_device *dev = crtc->dev;
2805         struct drm_i915_private *dev_priv = dev->dev_private;
2806         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2807         struct drm_plane *primary = crtc->primary;
2808         bool visible = to_intel_plane_state(primary->state)->visible;
2809         struct drm_i915_gem_object *obj;
2810         int plane = intel_crtc->plane;
2811         unsigned long linear_offset;
2812         u32 dspcntr;
2813         u32 reg = DSPCNTR(plane);
2814         int pixel_size;
2815
2816         if (!visible || !fb) {
2817                 I915_WRITE(reg, 0);
2818                 I915_WRITE(DSPSURF(plane), 0);
2819                 POSTING_READ(reg);
2820                 return;
2821         }
2822
2823         obj = intel_fb_obj(fb);
2824         if (WARN_ON(obj == NULL))
2825                 return;
2826
2827         pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
2828
2829         dspcntr = DISPPLANE_GAMMA_ENABLE;
2830
2831         dspcntr |= DISPLAY_PLANE_ENABLE;
2832
2833         if (IS_HASWELL(dev) || IS_BROADWELL(dev))
2834                 dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;
2835
2836         switch (fb->pixel_format) {
2837         case DRM_FORMAT_C8:
2838                 dspcntr |= DISPPLANE_8BPP;
2839                 break;
2840         case DRM_FORMAT_RGB565:
2841                 dspcntr |= DISPPLANE_BGRX565;
2842                 break;
2843         case DRM_FORMAT_XRGB8888:
2844                 dspcntr |= DISPPLANE_BGRX888;
2845                 break;
2846         case DRM_FORMAT_XBGR8888:
2847                 dspcntr |= DISPPLANE_RGBX888;
2848                 break;
2849         case DRM_FORMAT_XRGB2101010:
2850                 dspcntr |= DISPPLANE_BGRX101010;
2851                 break;
2852         case DRM_FORMAT_XBGR2101010:
2853                 dspcntr |= DISPPLANE_RGBX101010;
2854                 break;
2855         default:
2856                 BUG();
2857         }
2858
2859         if (obj->tiling_mode != I915_TILING_NONE)
2860                 dspcntr |= DISPPLANE_TILED;
2861
2862         if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
2863                 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2864
2865         linear_offset = y * fb->pitches[0] + x * pixel_size;
2866         intel_crtc->dspaddr_offset =
2867                 intel_gen4_compute_page_offset(dev_priv,
2868                                                &x, &y, obj->tiling_mode,
2869                                                pixel_size,
2870                                                fb->pitches[0]);
2871         linear_offset -= intel_crtc->dspaddr_offset;
2872         if (crtc->primary->state->rotation == BIT(DRM_ROTATE_180)) {
2873                 dspcntr |= DISPPLANE_ROTATE_180;
2874
2875                 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
2876                         x += (intel_crtc->config->pipe_src_w - 1);
2877                         y += (intel_crtc->config->pipe_src_h - 1);
2878
2879                         /* Finding the last pixel of the last line of the display
2880                         data and adding to linear_offset*/
2881                         linear_offset +=
2882                                 (intel_crtc->config->pipe_src_h - 1) * fb->pitches[0] +
2883                                 (intel_crtc->config->pipe_src_w - 1) * pixel_size;
2884                 }
2885         }
2886
2887         intel_crtc->adjusted_x = x;
2888         intel_crtc->adjusted_y = y;
2889
2890         I915_WRITE(reg, dspcntr);
2891
2892         I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2893         I915_WRITE(DSPSURF(plane),
2894                    i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2895         if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
2896                 I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
2897         } else {
2898                 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2899                 I915_WRITE(DSPLINOFF(plane), linear_offset);
2900         }
2901         POSTING_READ(reg);
2902 }
2903
2904 u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier,
2905                               uint32_t pixel_format)
2906 {
2907         u32 bits_per_pixel = drm_format_plane_cpp(pixel_format, 0) * 8;
2908
2909         /*
2910          * The stride is either expressed as a multiple of 64 bytes
2911          * chunks for linear buffers or in number of tiles for tiled
2912          * buffers.
2913          */
2914         switch (fb_modifier) {
2915         case DRM_FORMAT_MOD_NONE:
2916                 return 64;
2917         case I915_FORMAT_MOD_X_TILED:
2918                 if (INTEL_INFO(dev)->gen == 2)
2919                         return 128;
2920                 return 512;
2921         case I915_FORMAT_MOD_Y_TILED:
2922                 /* No need to check for old gens and Y tiling since this is
2923                  * about the display engine and those will be blocked before
2924                  * we get here.
2925                  */
2926                 return 128;
2927         case I915_FORMAT_MOD_Yf_TILED:
2928                 if (bits_per_pixel == 8)
2929                         return 64;
2930                 else
2931                         return 128;
2932         default:
2933                 MISSING_CASE(fb_modifier);
2934                 return 64;
2935         }
2936 }
2937
2938 unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
2939                                      struct drm_i915_gem_object *obj,
2940                                      unsigned int plane)
2941 {
2942         const struct i915_ggtt_view *view = &i915_ggtt_view_normal;
2943         struct i915_vma *vma;
2944         unsigned char *offset;
2945
2946         if (intel_rotation_90_or_270(intel_plane->base.state->rotation))
2947                 view = &i915_ggtt_view_rotated;
2948
2949         vma = i915_gem_obj_to_ggtt_view(obj, view);
2950         if (WARN(!vma, "ggtt vma for display object not found! (view=%u)\n",
2951                 view->type))
2952                 return -1;
2953
2954         offset = (unsigned char *)vma->node.start;
2955
2956         if (plane == 1) {
2957                 offset += vma->ggtt_view.rotation_info.uv_start_page *
2958                           PAGE_SIZE;
2959         }
2960
2961         return (unsigned long)offset;
2962 }
2963
2964 static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
2965 {
2966         struct drm_device *dev = intel_crtc->base.dev;
2967         struct drm_i915_private *dev_priv = dev->dev_private;
2968
2969         I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0);
2970         I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
2971         I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
2972 }
2973
2974 /*
2975  * This function detaches (aka. unbinds) unused scalers in hardware
2976  */
2977 static void skl_detach_scalers(struct intel_crtc *intel_crtc)
2978 {
2979         struct intel_crtc_scaler_state *scaler_state;
2980         int i;
2981
2982         scaler_state = &intel_crtc->config->scaler_state;
2983
2984         /* loop through and disable scalers that aren't in use */
2985         for (i = 0; i < intel_crtc->num_scalers; i++) {
2986                 if (!scaler_state->scalers[i].in_use)
2987                         skl_detach_scaler(intel_crtc, i);
2988         }
2989 }
2990
2991 u32 skl_plane_ctl_format(uint32_t pixel_format)
2992 {
2993         switch (pixel_format) {
2994         case DRM_FORMAT_C8:
2995                 return PLANE_CTL_FORMAT_INDEXED;
2996         case DRM_FORMAT_RGB565:
2997                 return PLANE_CTL_FORMAT_RGB_565;
2998         case DRM_FORMAT_XBGR8888:
2999                 return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
3000         case DRM_FORMAT_XRGB8888:
3001                 return PLANE_CTL_FORMAT_XRGB_8888;
3002         /*
3003          * XXX: For ARBG/ABGR formats we default to expecting scanout buffers
3004          * to be already pre-multiplied. We need to add a knob (or a different
3005          * DRM_FORMAT) for user-space to configure that.
3006          */
3007         case DRM_FORMAT_ABGR8888:
3008                 return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX |
3009                         PLANE_CTL_ALPHA_SW_PREMULTIPLY;
3010         case DRM_FORMAT_ARGB8888:
3011                 return PLANE_CTL_FORMAT_XRGB_8888 |
3012                         PLANE_CTL_ALPHA_SW_PREMULTIPLY;
3013         case DRM_FORMAT_XRGB2101010:
3014                 return PLANE_CTL_FORMAT_XRGB_2101010;
3015         case DRM_FORMAT_XBGR2101010:
3016                 return PLANE_CTL_ORDER_RGBX | PLANE_CTL_FORMAT_XRGB_2101010;
3017         case DRM_FORMAT_YUYV:
3018                 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
3019         case DRM_FORMAT_YVYU:
3020                 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
3021         case DRM_FORMAT_UYVY:
3022                 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
3023         case DRM_FORMAT_VYUY:
3024                 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
3025         default:
3026                 MISSING_CASE(pixel_format);
3027         }
3028
3029         return 0;
3030 }
3031
3032 u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
3033 {
3034         switch (fb_modifier) {
3035         case DRM_FORMAT_MOD_NONE:
3036                 break;
3037         case I915_FORMAT_MOD_X_TILED:
3038                 return PLANE_CTL_TILED_X;
3039         case I915_FORMAT_MOD_Y_TILED:
3040                 return PLANE_CTL_TILED_Y;
3041         case I915_FORMAT_MOD_Yf_TILED:
3042                 return PLANE_CTL_TILED_YF;
3043         default:
3044                 MISSING_CASE(fb_modifier);
3045         }
3046
3047         return 0;
3048 }
3049
3050 u32 skl_plane_ctl_rotation(unsigned int rotation)
3051 {
3052         switch (rotation) {
3053         case BIT(DRM_ROTATE_0):
3054                 break;
3055         /*
3056          * DRM_ROTATE_ is counter clockwise to stay compatible with Xrandr
3057          * while i915 HW rotation is clockwise, thats why this swapping.
3058          */
3059         case BIT(DRM_ROTATE_90):
3060                 return PLANE_CTL_ROTATE_270;
3061         case BIT(DRM_ROTATE_180):
3062                 return PLANE_CTL_ROTATE_180;
3063         case BIT(DRM_ROTATE_270):
3064                 return PLANE_CTL_ROTATE_90;
3065         default:
3066                 MISSING_CASE(rotation);
3067         }
3068
3069         return 0;
3070 }
3071
3072 static void skylake_update_primary_plane(struct drm_crtc *crtc,
3073                                          struct drm_framebuffer *fb,
3074                                          int x, int y)
3075 {
3076         struct drm_device *dev = crtc->dev;
3077         struct drm_i915_private *dev_priv = dev->dev_private;
3078         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3079         struct drm_plane *plane = crtc->primary;
3080         bool visible = to_intel_plane_state(plane->state)->visible;
3081         struct drm_i915_gem_object *obj;
3082         int pipe = intel_crtc->pipe;
3083         u32 plane_ctl, stride_div, stride;
3084         u32 tile_height, plane_offset, plane_size;
3085         unsigned int rotation;
3086         int x_offset, y_offset;
3087         unsigned long surf_addr;
3088         struct intel_crtc_state *crtc_state = intel_crtc->config;
3089         struct intel_plane_state *plane_state;
3090         int src_x = 0, src_y = 0, src_w = 0, src_h = 0;
3091         int dst_x = 0, dst_y = 0, dst_w = 0, dst_h = 0;
3092         int scaler_id = -1;
3093
3094         plane_state = to_intel_plane_state(plane->state);
3095
3096         if (!visible || !fb) {
3097                 I915_WRITE(PLANE_CTL(pipe, 0), 0);
3098                 I915_WRITE(PLANE_SURF(pipe, 0), 0);
3099                 POSTING_READ(PLANE_CTL(pipe, 0));
3100                 return;
3101         }
3102
3103         plane_ctl = PLANE_CTL_ENABLE |
3104                     PLANE_CTL_PIPE_GAMMA_ENABLE |
3105                     PLANE_CTL_PIPE_CSC_ENABLE;
3106
3107         plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
3108         plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
3109         plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
3110
3111         rotation = plane->state->rotation;
3112         plane_ctl |= skl_plane_ctl_rotation(rotation);
3113
3114         obj = intel_fb_obj(fb);
3115         stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
3116                                                fb->pixel_format);
3117         surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj, 0);
3118
3119         WARN_ON(drm_rect_width(&plane_state->src) == 0);
3120
3121         scaler_id = plane_state->scaler_id;
3122         src_x = plane_state->src.x1 >> 16;
3123         src_y = plane_state->src.y1 >> 16;
3124         src_w = drm_rect_width(&plane_state->src) >> 16;
3125         src_h = drm_rect_height(&plane_state->src) >> 16;
3126         dst_x = plane_state->dst.x1;
3127         dst_y = plane_state->dst.y1;
3128         dst_w = drm_rect_width(&plane_state->dst);
3129         dst_h = drm_rect_height(&plane_state->dst);
3130
3131         WARN_ON(x != src_x || y != src_y);
3132
3133         if (intel_rotation_90_or_270(rotation)) {
3134                 /* stride = Surface height in tiles */
3135                 tile_height = intel_tile_height(dev, fb->pixel_format,
3136                                                 fb->modifier[0], 0);
3137                 stride = DIV_ROUND_UP(fb->height, tile_height);
3138                 x_offset = stride * tile_height - y - src_h;
3139                 y_offset = x;
3140                 plane_size = (src_w - 1) << 16 | (src_h - 1);
3141         } else {
3142                 stride = fb->pitches[0] / stride_div;
3143                 x_offset = x;
3144                 y_offset = y;
3145                 plane_size = (src_h - 1) << 16 | (src_w - 1);
3146         }
3147         plane_offset = y_offset << 16 | x_offset;
3148
3149         intel_crtc->adjusted_x = x_offset;
3150         intel_crtc->adjusted_y = y_offset;
3151
3152         I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
3153         I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
3154         I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
3155         I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
3156
3157         if (scaler_id >= 0) {
3158                 uint32_t ps_ctrl = 0;
3159
3160                 WARN_ON(!dst_w || !dst_h);
3161                 ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
3162                         crtc_state->scaler_state.scalers[scaler_id].mode;
3163                 I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
3164                 I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
3165                 I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) | dst_y);
3166                 I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) | dst_h);
3167                 I915_WRITE(PLANE_POS(pipe, 0), 0);
3168         } else {
3169                 I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
3170         }
3171
3172         I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
3173
3174         POSTING_READ(PLANE_SURF(pipe, 0));
3175 }
3176
3177 /* Assume fb object is pinned & idle & fenced and just update base pointers */
3178 static int
3179 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
3180                            int x, int y, enum mode_set_atomic state)
3181 {
3182         struct drm_device *dev = crtc->dev;
3183         struct drm_i915_private *dev_priv = dev->dev_private;
3184
3185         if (dev_priv->fbc.disable_fbc)
3186                 dev_priv->fbc.disable_fbc(dev_priv);
3187
3188         dev_priv->display.update_primary_plane(crtc, fb, x, y);
3189
3190         return 0;
3191 }
3192
3193 static void intel_complete_page_flips(struct drm_device *dev)
3194 {
3195         struct drm_crtc *crtc;
3196
3197         for_each_crtc(dev, crtc) {
3198                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3199                 enum plane plane = intel_crtc->plane;
3200
3201                 intel_prepare_page_flip(dev, plane);
3202                 intel_finish_page_flip_plane(dev, plane);
3203         }
3204 }
3205
3206 static void intel_update_primary_planes(struct drm_device *dev)
3207 {
3208         struct drm_crtc *crtc;
3209
3210         for_each_crtc(dev, crtc) {
3211                 struct intel_plane *plane = to_intel_plane(crtc->primary);
3212                 struct intel_plane_state *plane_state;
3213
3214                 drm_modeset_lock_crtc(crtc, &plane->base);
3215
3216                 plane_state = to_intel_plane_state(plane->base.state);
3217
3218                 if (plane_state->base.fb)
3219                         plane->commit_plane(&plane->base, plane_state);
3220
3221                 drm_modeset_unlock_crtc(crtc);
3222         }
3223 }
3224
3225 void intel_prepare_reset(struct drm_device *dev)
3226 {
3227         /* no reset support for gen2 */
3228         if (IS_GEN2(dev))
3229                 return;
3230
3231         /* reset doesn't touch the display */
3232         if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
3233                 return;
3234
3235         drm_modeset_lock_all(dev);
3236         /*
3237          * Disabling the crtcs gracefully seems nicer. Also the
3238          * g33 docs say we should at least disable all the planes.
3239          */
3240         intel_display_suspend(dev);
3241 }
3242
3243 void intel_finish_reset(struct drm_device *dev)
3244 {
3245         struct drm_i915_private *dev_priv = to_i915(dev);
3246
3247         /*
3248          * Flips in the rings will be nuked by the reset,
3249          * so complete all pending flips so that user space
3250          * will get its events and not get stuck.
3251          */
3252         intel_complete_page_flips(dev);
3253
3254         /* no reset support for gen2 */
3255         if (IS_GEN2(dev))
3256                 return;
3257
3258         /* reset doesn't touch the display */
3259         if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev)) {
3260                 /*
3261                  * Flips in the rings have been nuked by the reset,
3262                  * so update the base address of all primary
3263                  * planes to the the last fb to make sure we're
3264                  * showing the correct fb after a reset.
3265                  *
3266                  * FIXME: Atomic will make this obsolete since we won't schedule
3267                  * CS-based flips (which might get lost in gpu resets) any more.
3268                  */
3269                 intel_update_primary_planes(dev);
3270                 return;
3271         }
3272
3273         /*
3274          * The display has been reset as well,
3275          * so need a full re-initialization.
3276          */
3277         intel_runtime_pm_disable_interrupts(dev_priv);
3278         intel_runtime_pm_enable_interrupts(dev_priv);
3279
3280         intel_modeset_init_hw(dev);
3281
3282         spin_lock_irq(&dev_priv->irq_lock);
3283         if (dev_priv->display.hpd_irq_setup)
3284                 dev_priv->display.hpd_irq_setup(dev);
3285         spin_unlock_irq(&dev_priv->irq_lock);
3286
3287         intel_display_resume(dev);
3288
3289         intel_hpd_init(dev_priv);
3290
3291         drm_modeset_unlock_all(dev);
3292 }
3293
3294 static void
3295 intel_finish_fb(struct drm_framebuffer *old_fb)
3296 {
3297         struct drm_i915_gem_object *obj = intel_fb_obj(old_fb);
3298         struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
3299         bool was_interruptible = dev_priv->mm.interruptible;
3300         int ret;
3301
3302         /* Big Hammer, we also need to ensure that any pending
3303          * MI_WAIT_FOR_EVENT inside a user batch buffer on the
3304          * current scanout is retired before unpinning the old
3305          * framebuffer. Note that we rely on userspace rendering
3306          * into the buffer attached to the pipe they are waiting
3307          * on. If not, userspace generates a GPU hang with IPEHR
3308          * point to the MI_WAIT_FOR_EVENT.
3309          *
3310          * This should only fail upon a hung GPU, in which case we
3311          * can safely continue.
3312          */
3313         dev_priv->mm.interruptible = false;
3314         ret = i915_gem_object_wait_rendering(obj, true);
3315         dev_priv->mm.interruptible = was_interruptible;
3316
3317         WARN_ON(ret);
3318 }
3319
3320 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
3321 {
3322         struct drm_device *dev = crtc->dev;
3323         struct drm_i915_private *dev_priv = dev->dev_private;
3324         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3325         bool pending;
3326
3327         if (i915_reset_in_progress(&dev_priv->gpu_error) ||
3328             intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
3329                 return false;
3330
3331         spin_lock_irq(&dev->event_lock);
3332         pending = to_intel_crtc(crtc)->unpin_work != NULL;
3333         spin_unlock_irq(&dev->event_lock);
3334
3335         return pending;
3336 }
3337
3338 static void intel_update_pipe_config(struct intel_crtc *crtc,
3339                                      struct intel_crtc_state *old_crtc_state)
3340 {
3341         struct drm_device *dev = crtc->base.dev;
3342         struct drm_i915_private *dev_priv = dev->dev_private;
3343         struct intel_crtc_state *pipe_config =
3344                 to_intel_crtc_state(crtc->base.state);
3345
3346         /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
3347         crtc->base.mode = crtc->base.state->mode;
3348
3349         DRM_DEBUG_KMS("Updating pipe size %ix%i -> %ix%i\n",
3350                       old_crtc_state->pipe_src_w, old_crtc_state->pipe_src_h,
3351                       pipe_config->pipe_src_w, pipe_config->pipe_src_h);
3352
3353         if (HAS_DDI(dev))
3354                 intel_set_pipe_csc(&crtc->base);
3355
3356         /*
3357          * Update pipe size and adjust fitter if needed: the reason for this is
3358          * that in compute_mode_changes we check the native mode (not the pfit
3359          * mode) to see if we can flip rather than do a full mode set. In the
3360          * fastboot case, we'll flip, but if we don't update the pipesrc and
3361          * pfit state, we'll end up with a big fb scanned out into the wrong
3362          * sized surface.
3363          */
3364
3365         I915_WRITE(PIPESRC(crtc->pipe),
3366                    ((pipe_config->pipe_src_w - 1) << 16) |
3367                    (pipe_config->pipe_src_h - 1));
3368
3369         /* on skylake this is done by detaching scalers */
3370         if (INTEL_INFO(dev)->gen >= 9) {
3371                 skl_detach_scalers(crtc);
3372
3373                 if (pipe_config->pch_pfit.enabled)
3374                         skylake_pfit_enable(crtc);
3375         } else if (HAS_PCH_SPLIT(dev)) {
3376                 if (pipe_config->pch_pfit.enabled)
3377                         ironlake_pfit_enable(crtc);
3378                 else if (old_crtc_state->pch_pfit.enabled)
3379                         ironlake_pfit_disable(crtc, true);
3380         }
3381 }
3382
3383 static void intel_fdi_normal_train(struct drm_crtc *crtc)
3384 {
3385         struct drm_device *dev = crtc->dev;
3386         struct drm_i915_private *dev_priv = dev->dev_private;
3387         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3388         int pipe = intel_crtc->pipe;
3389         u32 reg, temp;
3390
3391         /* enable normal train */
3392         reg = FDI_TX_CTL(pipe);
3393         temp = I915_READ(reg);
3394         if (IS_IVYBRIDGE(dev)) {
3395                 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
3396                 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
3397         } else {
3398                 temp &= ~FDI_LINK_TRAIN_NONE;
3399                 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
3400         }
3401         I915_WRITE(reg, temp);
3402
3403         reg = FDI_RX_CTL(pipe);
3404         temp = I915_READ(reg);
3405         if (HAS_PCH_CPT(dev)) {
3406                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3407                 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
3408         } else {
3409                 temp &= ~FDI_LINK_TRAIN_NONE;
3410                 temp |= FDI_LINK_TRAIN_NONE;
3411         }
3412         I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
3413
3414         /* wait one idle pattern time */
3415         POSTING_READ(reg);
3416         udelay(1000);
3417
3418         /* IVB wants error correction enabled */
3419         if (IS_IVYBRIDGE(dev))
3420                 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
3421                            FDI_FE_ERRC_ENABLE);
3422 }
3423
3424 /* The FDI link training functions for ILK/Ibexpeak. */
3425 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
3426 {
3427         struct drm_device *dev = crtc->dev;
3428         struct drm_i915_private *dev_priv = dev->dev_private;
3429         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3430         int pipe = intel_crtc->pipe;
3431         u32 reg, temp, tries;
3432
3433         /* FDI needs bits from pipe first */
3434         assert_pipe_enabled(dev_priv, pipe);
3435
3436         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3437            for train result */
3438         reg = FDI_RX_IMR(pipe);
3439         temp = I915_READ(reg);
3440         temp &= ~FDI_RX_SYMBOL_LOCK;
3441         temp &= ~FDI_RX_BIT_LOCK;
3442         I915_WRITE(reg, temp);
3443         I915_READ(reg);
3444         udelay(150);
3445
3446         /* enable CPU FDI TX and PCH FDI RX */
3447         reg = FDI_TX_CTL(pipe);
3448         temp = I915_READ(reg);
3449         temp &= ~FDI_DP_PORT_WIDTH_MASK;
3450         temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3451         temp &= ~FDI_LINK_TRAIN_NONE;
3452         temp |= FDI_LINK_TRAIN_PATTERN_1;
3453         I915_WRITE(reg, temp | FDI_TX_ENABLE);
3454
3455         reg = FDI_RX_CTL(pipe);
3456         temp = I915_READ(reg);
3457         temp &= ~FDI_LINK_TRAIN_NONE;
3458         temp |= FDI_LINK_TRAIN_PATTERN_1;
3459         I915_WRITE(reg, temp | FDI_RX_ENABLE);
3460
3461         POSTING_READ(reg);
3462         udelay(150);
3463
3464         /* Ironlake workaround, enable clock pointer after FDI enable*/
3465         I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3466         I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
3467                    FDI_RX_PHASE_SYNC_POINTER_EN);
3468
3469         reg = FDI_RX_IIR(pipe);
3470         for (tries = 0; tries < 5; tries++) {
3471                 temp = I915_READ(reg);
3472                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3473
3474                 if ((temp & FDI_RX_BIT_LOCK)) {
3475                         DRM_DEBUG_KMS("FDI train 1 done.\n");
3476                         I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3477                         break;
3478                 }
3479         }
3480         if (tries == 5)
3481                 DRM_ERROR("FDI train 1 fail!\n");
3482
3483         /* Train 2 */
3484         reg = FDI_TX_CTL(pipe);
3485         temp = I915_READ(reg);
3486         temp &= ~FDI_LINK_TRAIN_NONE;
3487         temp |= FDI_LINK_TRAIN_PATTERN_2;
3488         I915_WRITE(reg, temp);
3489
3490         reg = FDI_RX_CTL(pipe);
3491         temp = I915_READ(reg);
3492         temp &= ~FDI_LINK_TRAIN_NONE;
3493         temp |= FDI_LINK_TRAIN_PATTERN_2;
3494         I915_WRITE(reg, temp);
3495
3496         POSTING_READ(reg);
3497         udelay(150);
3498
3499         reg = FDI_RX_IIR(pipe);
3500         for (tries = 0; tries < 5; tries++) {
3501                 temp = I915_READ(reg);
3502                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3503
3504                 if (temp & FDI_RX_SYMBOL_LOCK) {
3505                         I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3506                         DRM_DEBUG_KMS("FDI train 2 done.\n");
3507                         break;
3508                 }
3509         }
3510         if (tries == 5)
3511                 DRM_ERROR("FDI train 2 fail!\n");
3512
3513         DRM_DEBUG_KMS("FDI train done\n");
3514
3515 }
3516
3517 static const int snb_b_fdi_train_param[] = {
3518         FDI_LINK_TRAIN_400MV_0DB_SNB_B,
3519         FDI_LINK_TRAIN_400MV_6DB_SNB_B,
3520         FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
3521         FDI_LINK_TRAIN_800MV_0DB_SNB_B,
3522 };
3523
3524 /* The FDI link training functions for SNB/Cougarpoint. */
3525 static void gen6_fdi_link_train(struct drm_crtc *crtc)
3526 {
3527         struct drm_device *dev = crtc->dev;
3528         struct drm_i915_private *dev_priv = dev->dev_private;
3529         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3530         int pipe = intel_crtc->pipe;
3531         u32 reg, temp, i, retry;
3532
3533         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3534            for train result */
3535         reg = FDI_RX_IMR(pipe);
3536         temp = I915_READ(reg);
3537         temp &= ~FDI_RX_SYMBOL_LOCK;
3538         temp &= ~FDI_RX_BIT_LOCK;
3539         I915_WRITE(reg, temp);
3540
3541         POSTING_READ(reg);
3542         udelay(150);
3543
3544         /* enable CPU FDI TX and PCH FDI RX */
3545         reg = FDI_TX_CTL(pipe);
3546         temp = I915_READ(reg);
3547         temp &= ~FDI_DP_PORT_WIDTH_MASK;
3548         temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3549         temp &= ~FDI_LINK_TRAIN_NONE;
3550         temp |= FDI_LINK_TRAIN_PATTERN_1;
3551         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3552         /* SNB-B */
3553         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3554         I915_WRITE(reg, temp | FDI_TX_ENABLE);
3555
3556         I915_WRITE(FDI_RX_MISC(pipe),
3557                    FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
3558
3559         reg = FDI_RX_CTL(pipe);
3560         temp = I915_READ(reg);
3561         if (HAS_PCH_CPT(dev)) {
3562                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3563                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3564         } else {
3565                 temp &= ~FDI_LINK_TRAIN_NONE;
3566                 temp |= FDI_LINK_TRAIN_PATTERN_1;
3567         }
3568         I915_WRITE(reg, temp | FDI_RX_ENABLE);
3569
3570         POSTING_READ(reg);
3571         udelay(150);
3572
3573         for (i = 0; i < 4; i++) {
3574                 reg = FDI_TX_CTL(pipe);
3575                 temp = I915_READ(reg);
3576                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3577                 temp |= snb_b_fdi_train_param[i];
3578                 I915_WRITE(reg, temp);
3579
3580                 POSTING_READ(reg);
3581                 udelay(500);
3582
3583                 for (retry = 0; retry < 5; retry++) {
3584                         reg = FDI_RX_IIR(pipe);
3585                         temp = I915_READ(reg);
3586                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3587                         if (temp & FDI_RX_BIT_LOCK) {
3588                                 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3589                                 DRM_DEBUG_KMS("FDI train 1 done.\n");
3590                                 break;
3591                         }
3592                         udelay(50);
3593                 }
3594                 if (retry < 5)
3595                         break;
3596         }
3597         if (i == 4)
3598                 DRM_ERROR("FDI train 1 fail!\n");
3599
3600         /* Train 2 */
3601         reg = FDI_TX_CTL(pipe);
3602         temp = I915_READ(reg);
3603         temp &= ~FDI_LINK_TRAIN_NONE;
3604         temp |= FDI_LINK_TRAIN_PATTERN_2;
3605         if (IS_GEN6(dev)) {
3606                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3607                 /* SNB-B */
3608                 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3609         }
3610         I915_WRITE(reg, temp);
3611
3612         reg = FDI_RX_CTL(pipe);
3613         temp = I915_READ(reg);
3614         if (HAS_PCH_CPT(dev)) {
3615                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3616                 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
3617         } else {
3618                 temp &= ~FDI_LINK_TRAIN_NONE;
3619                 temp |= FDI_LINK_TRAIN_PATTERN_2;
3620         }
3621         I915_WRITE(reg, temp);
3622
3623         POSTING_READ(reg);
3624         udelay(150);
3625
3626         for (i = 0; i < 4; i++) {
3627                 reg = FDI_TX_CTL(pipe);
3628                 temp = I915_READ(reg);
3629                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3630                 temp |= snb_b_fdi_train_param[i];
3631                 I915_WRITE(reg, temp);
3632
3633                 POSTING_READ(reg);
3634                 udelay(500);
3635
3636                 for (retry = 0; retry < 5; retry++) {
3637                         reg = FDI_RX_IIR(pipe);
3638                         temp = I915_READ(reg);
3639                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3640                         if (temp & FDI_RX_SYMBOL_LOCK) {
3641                                 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3642                                 DRM_DEBUG_KMS("FDI train 2 done.\n");
3643                                 break;
3644                         }
3645                         udelay(50);
3646                 }
3647                 if (retry < 5)
3648                         break;
3649         }
3650         if (i == 4)
3651                 DRM_ERROR("FDI train 2 fail!\n");
3652
3653         DRM_DEBUG_KMS("FDI train done.\n");
3654 }
3655
3656 /* Manual link training for Ivy Bridge A0 parts */
3657 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
3658 {
3659         struct drm_device *dev = crtc->dev;
3660         struct drm_i915_private *dev_priv = dev->dev_private;
3661         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3662         int pipe = intel_crtc->pipe;
3663         u32 reg, temp, i, j;
3664
3665         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3666            for train result */
3667         reg = FDI_RX_IMR(pipe);
3668         temp = I915_READ(reg);
3669         temp &= ~FDI_RX_SYMBOL_LOCK;
3670         temp &= ~FDI_RX_BIT_LOCK;
3671         I915_WRITE(reg, temp);
3672
3673         POSTING_READ(reg);
3674         udelay(150);
3675
3676         DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
3677                       I915_READ(FDI_RX_IIR(pipe)));
3678
3679         /* Try each vswing and preemphasis setting twice before moving on */
3680         for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
3681                 /* disable first in case we need to retry */
3682                 reg = FDI_TX_CTL(pipe);
3683                 temp = I915_READ(reg);
3684                 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
3685                 temp &= ~FDI_TX_ENABLE;
3686                 I915_WRITE(reg, temp);
3687
3688                 reg = FDI_RX_CTL(pipe);
3689                 temp = I915_READ(reg);
3690                 temp &= ~FDI_LINK_TRAIN_AUTO;
3691                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3692                 temp &= ~FDI_RX_ENABLE;
3693                 I915_WRITE(reg, temp);
3694
3695                 /* enable CPU FDI TX and PCH FDI RX */
3696                 reg = FDI_TX_CTL(pipe);
3697                 temp = I915_READ(reg);
3698                 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3699                 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3700                 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
3701                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3702                 temp |= snb_b_fdi_train_param[j/2];
3703                 temp |= FDI_COMPOSITE_SYNC;
3704                 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3705
3706                 I915_WRITE(FDI_RX_MISC(pipe),
3707                            FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
3708
3709                 reg = FDI_RX_CTL(pipe);
3710                 temp = I915_READ(reg);
3711                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3712                 temp |= FDI_COMPOSITE_SYNC;
3713                 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3714
3715                 POSTING_READ(reg);
3716                 udelay(1); /* should be 0.5us */
3717
3718                 for (i = 0; i < 4; i++) {
3719                         reg = FDI_RX_IIR(pipe);
3720                         temp = I915_READ(reg);
3721                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3722
3723                         if (temp & FDI_RX_BIT_LOCK ||
3724                             (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
3725                                 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3726                                 DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
3727                                               i);
3728                                 break;
3729                         }
3730                         udelay(1); /* should be 0.5us */
3731                 }
3732                 if (i == 4) {
3733                         DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
3734                         continue;
3735                 }
3736
3737                 /* Train 2 */
3738                 reg = FDI_TX_CTL(pipe);
3739                 temp = I915_READ(reg);
3740                 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
3741                 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
3742                 I915_WRITE(reg, temp);
3743
3744                 reg = FDI_RX_CTL(pipe);
3745                 temp = I915_READ(reg);
3746                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3747                 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
3748                 I915_WRITE(reg, temp);
3749
3750                 POSTING_READ(reg);
3751                 udelay(2); /* should be 1.5us */
3752
3753                 for (i = 0; i < 4; i++) {
3754                         reg = FDI_RX_IIR(pipe);
3755                         temp = I915_READ(reg);
3756                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3757
3758                         if (temp & FDI_RX_SYMBOL_LOCK ||
3759                             (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
3760                                 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3761                                 DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
3762                                               i);
3763                                 goto train_done;
3764                         }
3765                         udelay(2); /* should be 1.5us */
3766                 }
3767                 if (i == 4)
3768                         DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
3769         }
3770
3771 train_done:
3772         DRM_DEBUG_KMS("FDI train done.\n");
3773 }
3774
3775 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
3776 {
3777         struct drm_device *dev = intel_crtc->base.dev;
3778         struct drm_i915_private *dev_priv = dev->dev_private;
3779         int pipe = intel_crtc->pipe;
3780         u32 reg, temp;
3781
3782
3783         /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
3784         reg = FDI_RX_CTL(pipe);
3785         temp = I915_READ(reg);
3786         temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
3787         temp |= FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes);
3788         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3789         I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
3790
3791         POSTING_READ(reg);
3792         udelay(200);
3793
3794         /* Switch from Rawclk to PCDclk */
3795         temp = I915_READ(reg);
3796         I915_WRITE(reg, temp | FDI_PCDCLK);
3797
3798         POSTING_READ(reg);
3799         udelay(200);
3800
3801         /* Enable CPU FDI TX PLL, always on for Ironlake */
3802         reg = FDI_TX_CTL(pipe);
3803         temp = I915_READ(reg);
3804         if ((temp & FDI_TX_PLL_ENABLE) == 0) {
3805                 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
3806
3807                 POSTING_READ(reg);
3808                 udelay(100);
3809         }
3810 }
3811
3812 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
3813 {
3814         struct drm_device *dev = intel_crtc->base.dev;
3815         struct drm_i915_private *dev_priv = dev->dev_private;
3816         int pipe = intel_crtc->pipe;
3817         u32 reg, temp;
3818
3819         /* Switch from PCDclk to Rawclk */
3820         reg = FDI_RX_CTL(pipe);
3821         temp = I915_READ(reg);
3822         I915_WRITE(reg, temp & ~FDI_PCDCLK);
3823
3824         /* Disable CPU FDI TX PLL */
3825         reg = FDI_TX_CTL(pipe);
3826         temp = I915_READ(reg);
3827         I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
3828
3829         POSTING_READ(reg);
3830         udelay(100);
3831
3832         reg = FDI_RX_CTL(pipe);
3833         temp = I915_READ(reg);
3834         I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
3835
3836         /* Wait for the clocks to turn off. */
3837         POSTING_READ(reg);
3838         udelay(100);
3839 }
3840
3841 static void ironlake_fdi_disable(struct drm_crtc *crtc)
3842 {
3843         struct drm_device *dev = crtc->dev;
3844         struct drm_i915_private *dev_priv = dev->dev_private;
3845         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3846         int pipe = intel_crtc->pipe;
3847         u32 reg, temp;
3848
3849         /* disable CPU FDI tx and PCH FDI rx */
3850         reg = FDI_TX_CTL(pipe);
3851         temp = I915_READ(reg);
3852         I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
3853         POSTING_READ(reg);
3854
3855         reg = FDI_RX_CTL(pipe);
3856         temp = I915_READ(reg);
3857         temp &= ~(0x7 << 16);
3858         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3859         I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
3860
3861         POSTING_READ(reg);
3862         udelay(100);
3863
3864         /* Ironlake workaround, disable clock pointer after downing FDI */
3865         if (HAS_PCH_IBX(dev))
3866                 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3867
3868         /* still set train pattern 1 */
3869         reg = FDI_TX_CTL(pipe);
3870         temp = I915_READ(reg);
3871         temp &= ~FDI_LINK_TRAIN_NONE;
3872         temp |= FDI_LINK_TRAIN_PATTERN_1;
3873         I915_WRITE(reg, temp);
3874
3875         reg = FDI_RX_CTL(pipe);
3876         temp = I915_READ(reg);
3877         if (HAS_PCH_CPT(dev)) {
3878                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3879                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3880         } else {
3881                 temp &= ~FDI_LINK_TRAIN_NONE;
3882                 temp |= FDI_LINK_TRAIN_PATTERN_1;
3883         }
3884         /* BPC in FDI rx is consistent with that in PIPECONF */
3885         temp &= ~(0x07 << 16);
3886         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3887         I915_WRITE(reg, temp);
3888
3889         POSTING_READ(reg);
3890         udelay(100);
3891 }
3892
3893 bool intel_has_pending_fb_unpin(struct drm_device *dev)
3894 {
3895         struct intel_crtc *crtc;
3896
3897         /* Note that we don't need to be called with mode_config.lock here
3898          * as our list of CRTC objects is static for the lifetime of the
3899          * device and so cannot disappear as we iterate. Similarly, we can
3900          * happily treat the predicates as racy, atomic checks as userspace
3901          * cannot claim and pin a new fb without at least acquring the
3902          * struct_mutex and so serialising with us.
3903          */
3904         for_each_intel_crtc(dev, crtc) {
3905                 if (atomic_read(&crtc->unpin_work_count) == 0)
3906                         continue;
3907
3908                 if (crtc->unpin_work)
3909                         intel_wait_for_vblank(dev, crtc->pipe);
3910
3911                 return true;
3912         }
3913
3914         return false;
3915 }
3916
3917 static void page_flip_completed(struct intel_crtc *intel_crtc)
3918 {
3919         struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
3920         struct intel_unpin_work *work = intel_crtc->unpin_work;
3921
3922         /* ensure that the unpin work is consistent wrt ->pending. */
3923         smp_rmb();
3924         intel_crtc->unpin_work = NULL;
3925
3926         if (work->event)
3927                 drm_send_vblank_event(intel_crtc->base.dev,
3928                                       intel_crtc->pipe,
3929                                       work->event);
3930
3931         drm_crtc_vblank_put(&intel_crtc->base);
3932
3933         wake_up_all(&dev_priv->pending_flip_queue);
3934         queue_work(dev_priv->wq, &work->work);
3935
3936         trace_i915_flip_complete(intel_crtc->plane,
3937                                  work->pending_flip_obj);
3938 }
3939
3940 void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
3941 {
3942         struct drm_device *dev = crtc->dev;
3943         struct drm_i915_private *dev_priv = dev->dev_private;
3944
3945         WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
3946         if (WARN_ON(wait_event_timeout(dev_priv->pending_flip_queue,
3947                                        !intel_crtc_has_pending_flip(crtc),
3948                                        60*HZ) == 0)) {
3949                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3950
3951                 spin_lock_irq(&dev->event_lock);
3952                 if (intel_crtc->unpin_work) {
3953                         WARN_ONCE(1, "Removing stuck page flip\n");
3954                         page_flip_completed(intel_crtc);
3955                 }
3956                 spin_unlock_irq(&dev->event_lock);
3957         }
3958
3959         if (crtc->primary->fb) {
3960                 mutex_lock(&dev->struct_mutex);
3961                 intel_finish_fb(crtc->primary->fb);
3962                 mutex_unlock(&dev->struct_mutex);
3963         }
3964 }
3965
3966 /* Program iCLKIP clock to the desired frequency */
3967 static void lpt_program_iclkip(struct drm_crtc *crtc)
3968 {
3969         struct drm_device *dev = crtc->dev;
3970         struct drm_i915_private *dev_priv = dev->dev_private;
3971         int clock = to_intel_crtc(crtc)->config->base.adjusted_mode.crtc_clock;
3972         u32 divsel, phaseinc, auxdiv, phasedir = 0;
3973         u32 temp;
3974
3975         mutex_lock(&dev_priv->sb_lock);
3976
3977         /* It is necessary to ungate the pixclk gate prior to programming
3978          * the divisors, and gate it back when it is done.
3979          */
3980         I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
3981
3982         /* Disable SSCCTL */
3983         intel_sbi_write(dev_priv, SBI_SSCCTL6,
3984                         intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK) |
3985                                 SBI_SSCCTL_DISABLE,
3986                         SBI_ICLK);
3987
3988         /* 20MHz is a corner case which is out of range for the 7-bit divisor */
3989         if (clock == 20000) {
3990                 auxdiv = 1;
3991                 divsel = 0x41;
3992                 phaseinc = 0x20;
3993         } else {
3994                 /* The iCLK virtual clock root frequency is in MHz,
3995                  * but the adjusted_mode->crtc_clock in in KHz. To get the
3996                  * divisors, it is necessary to divide one by another, so we
3997                  * convert the virtual clock precision to KHz here for higher
3998                  * precision.
3999                  */
4000                 u32 iclk_virtual_root_freq = 172800 * 1000;
4001                 u32 iclk_pi_range = 64;
4002                 u32 desired_divisor, msb_divisor_value, pi_value;
4003
4004                 desired_divisor = (iclk_virtual_root_freq / clock);
4005                 msb_divisor_value = desired_divisor / iclk_pi_range;
4006                 pi_value = desired_divisor % iclk_pi_range;
4007
4008                 auxdiv = 0;
4009                 divsel = msb_divisor_value - 2;
4010                 phaseinc = pi_value;
4011         }
4012
4013         /* This should not happen with any sane values */
4014         WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
4015                 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
4016         WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
4017                 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
4018
4019         DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
4020                         clock,
4021                         auxdiv,
4022                         divsel,
4023                         phasedir,
4024                         phaseinc);
4025
4026         /* Program SSCDIVINTPHASE6 */
4027         temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
4028         temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
4029         temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
4030         temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
4031         temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
4032         temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
4033         temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
4034         intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
4035
4036         /* Program SSCAUXDIV */
4037         temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
4038         temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
4039         temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
4040         intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
4041
4042         /* Enable modulator and associated divider */
4043         temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
4044         temp &= ~SBI_SSCCTL_DISABLE;
4045         intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
4046
4047         /* Wait for initialization time */
4048         udelay(24);
4049
4050         I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
4051
4052         mutex_unlock(&dev_priv->sb_lock);
4053 }
4054
4055 static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
4056                                                 enum pipe pch_transcoder)
4057 {
4058         struct drm_device *dev = crtc->base.dev;
4059         struct drm_i915_private *dev_priv = dev->dev_private;
4060         enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
4061
4062         I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
4063                    I915_READ(HTOTAL(cpu_transcoder)));
4064         I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
4065                    I915_READ(HBLANK(cpu_transcoder)));
4066         I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
4067                    I915_READ(HSYNC(cpu_transcoder)));
4068
4069         I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
4070                    I915_READ(VTOTAL(cpu_transcoder)));
4071         I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
4072                    I915_READ(VBLANK(cpu_transcoder)));
4073         I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
4074                    I915_READ(VSYNC(cpu_transcoder)));
4075         I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
4076                    I915_READ(VSYNCSHIFT(cpu_transcoder)));
4077 }
4078
4079 static void cpt_set_fdi_bc_bifurcation(struct drm_device *dev, bool enable)
4080 {
4081         struct drm_i915_private *dev_priv = dev->dev_private;
4082         uint32_t temp;
4083
4084         temp = I915_READ(SOUTH_CHICKEN1);
4085         if (!!(temp & FDI_BC_BIFURCATION_SELECT) == enable)
4086                 return;
4087
4088         WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
4089         WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
4090
4091         temp &= ~FDI_BC_BIFURCATION_SELECT;
4092         if (enable)
4093                 temp |= FDI_BC_BIFURCATION_SELECT;
4094
4095         DRM_DEBUG_KMS("%sabling fdi C rx\n", enable ? "en" : "dis");
4096         I915_WRITE(SOUTH_CHICKEN1, temp);
4097         POSTING_READ(SOUTH_CHICKEN1);
4098 }
4099
4100 static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
4101 {
4102         struct drm_device *dev = intel_crtc->base.dev;
4103
4104         switch (intel_crtc->pipe) {
4105         case PIPE_A:
4106                 break;
4107         case PIPE_B:
4108                 if (intel_crtc->config->fdi_lanes > 2)
4109                         cpt_set_fdi_bc_bifurcation(dev, false);
4110                 else
4111                         cpt_set_fdi_bc_bifurcation(dev, true);
4112
4113                 break;
4114         case PIPE_C:
4115                 cpt_set_fdi_bc_bifurcation(dev, true);
4116
4117                 break;
4118         default:
4119                 BUG();
4120         }
4121 }
4122
4123 /*
4124  * Enable PCH resources required for PCH ports:
4125  *   - PCH PLLs
4126  *   - FDI training & RX/TX
4127  *   - update transcoder timings
4128  *   - DP transcoding bits
4129  *   - transcoder
4130  */
4131 static void ironlake_pch_enable(struct drm_crtc *crtc)
4132 {
4133         struct drm_device *dev = crtc->dev;
4134         struct drm_i915_private *dev_priv = dev->dev_private;
4135         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4136         int pipe = intel_crtc->pipe;
4137         u32 reg, temp;
4138
4139         assert_pch_transcoder_disabled(dev_priv, pipe);
4140
4141         if (IS_IVYBRIDGE(dev))
4142                 ivybridge_update_fdi_bc_bifurcation(intel_crtc);
4143
4144         /* Write the TU size bits before fdi link training, so that error
4145          * detection works. */
4146         I915_WRITE(FDI_RX_TUSIZE1(pipe),
4147                    I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
4148
4149         /* For PCH output, training FDI link */
4150         dev_priv->display.fdi_link_train(crtc);
4151
4152         /* We need to program the right clock selection before writing the pixel
4153          * mutliplier into the DPLL. */
4154         if (HAS_PCH_CPT(dev)) {
4155                 u32 sel;
4156
4157                 temp = I915_READ(PCH_DPLL_SEL);
4158                 temp |= TRANS_DPLL_ENABLE(pipe);
4159                 sel = TRANS_DPLLB_SEL(pipe);
4160                 if (intel_crtc->config->shared_dpll == DPLL_ID_PCH_PLL_B)
4161                         temp |= sel;
4162                 else
4163                         temp &= ~sel;
4164                 I915_WRITE(PCH_DPLL_SEL, temp);
4165         }
4166
4167         /* XXX: pch pll's can be enabled any time before we enable the PCH
4168          * transcoder, and we actually should do this to not upset any PCH
4169          * transcoder that already use the clock when we share it.
4170          *
4171          * Note that enable_shared_dpll tries to do the right thing, but
4172          * get_shared_dpll unconditionally resets the pll - we need that to have
4173          * the right LVDS enable sequence. */
4174         intel_enable_shared_dpll(intel_crtc);
4175
4176         /* set transcoder timing, panel must allow it */
4177         assert_panel_unlocked(dev_priv, pipe);
4178         ironlake_pch_transcoder_set_timings(intel_crtc, pipe);
4179
4180         intel_fdi_normal_train(crtc);
4181
4182         /* For PCH DP, enable TRANS_DP_CTL */
4183         if (HAS_PCH_CPT(dev) && intel_crtc->config->has_dp_encoder) {
4184                 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
4185                 reg = TRANS_DP_CTL(pipe);
4186                 temp = I915_READ(reg);
4187                 temp &= ~(TRANS_DP_PORT_SEL_MASK |
4188                           TRANS_DP_SYNC_MASK |
4189                           TRANS_DP_BPC_MASK);
4190                 temp |= TRANS_DP_OUTPUT_ENABLE;
4191                 temp |= bpc << 9; /* same format but at 11:9 */
4192
4193                 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
4194                         temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
4195                 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
4196                         temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
4197
4198                 switch (intel_trans_dp_port_sel(crtc)) {
4199                 case PCH_DP_B:
4200                         temp |= TRANS_DP_PORT_SEL_B;
4201                         break;
4202                 case PCH_DP_C:
4203                         temp |= TRANS_DP_PORT_SEL_C;
4204                         break;
4205                 case PCH_DP_D:
4206                         temp |= TRANS_DP_PORT_SEL_D;
4207                         break;
4208                 default:
4209                         BUG();
4210                 }
4211
4212                 I915_WRITE(reg, temp);
4213         }
4214
4215         ironlake_enable_pch_transcoder(dev_priv, pipe);
4216 }
4217
4218 static void lpt_pch_enable(struct drm_crtc *crtc)
4219 {
4220         struct drm_device *dev = crtc->dev;
4221         struct drm_i915_private *dev_priv = dev->dev_private;
4222         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4223         enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
4224
4225         assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
4226
4227         lpt_program_iclkip(crtc);
4228
4229         /* Set transcoder timing. */
4230         ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A);
4231
4232         lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
4233 }
4234
4235 struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc,
4236                                                 struct intel_crtc_state *crtc_state)
4237 {
4238         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
4239         struct intel_shared_dpll *pll;
4240         struct intel_shared_dpll_config *shared_dpll;
4241         enum intel_dpll_id i;
4242         int max = dev_priv->num_shared_dpll;
4243
4244         shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state);
4245
4246         if (HAS_PCH_IBX(dev_priv->dev)) {
4247                 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
4248                 i = (enum intel_dpll_id) crtc->pipe;
4249                 pll = &dev_priv->shared_dplls[i];
4250
4251                 DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
4252                               crtc->base.base.id, pll->name);
4253
4254                 WARN_ON(shared_dpll[i].crtc_mask);
4255
4256                 goto found;
4257         }
4258
4259         if (IS_BROXTON(dev_priv->dev)) {
4260                 /* PLL is attached to port in bxt */
4261                 struct intel_encoder *encoder;
4262                 struct intel_digital_port *intel_dig_port;
4263
4264                 encoder = intel_ddi_get_crtc_new_encoder(crtc_state);
4265                 if (WARN_ON(!encoder))
4266                         return NULL;
4267
4268                 intel_dig_port = enc_to_dig_port(&encoder->base);
4269                 /* 1:1 mapping between ports and PLLs */
4270                 i = (enum intel_dpll_id)intel_dig_port->port;
4271                 pll = &dev_priv->shared_dplls[i];
4272                 DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
4273                         crtc->base.base.id, pll->name);
4274                 WARN_ON(shared_dpll[i].crtc_mask);
4275
4276                 goto found;
4277         } else if (INTEL_INFO(dev_priv)->gen < 9 && HAS_DDI(dev_priv))
4278                 /* Do not consider SPLL */
4279                 max = 2;
4280
4281         for (i = 0; i < max; i++) {
4282                 pll = &dev_priv->shared_dplls[i];
4283
4284                 /* Only want to check enabled timings first */
4285                 if (shared_dpll[i].crtc_mask == 0)
4286                         continue;
4287
4288                 if (memcmp(&crtc_state->dpll_hw_state,
4289                            &shared_dpll[i].hw_state,
4290                            sizeof(crtc_state->dpll_hw_state)) == 0) {
4291                         DRM_DEBUG_KMS("CRTC:%d sharing existing %s (crtc mask 0x%08x, ative %d)\n",
4292                                       crtc->base.base.id, pll->name,
4293                                       shared_dpll[i].crtc_mask,
4294                                       pll->active);
4295                         goto found;
4296                 }
4297         }
4298
4299         /* Ok no matching timings, maybe there's a free one? */
4300         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
4301                 pll = &dev_priv->shared_dplls[i];
4302                 if (shared_dpll[i].crtc_mask == 0) {
4303                         DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
4304                                       crtc->base.base.id, pll->name);
4305                         goto found;
4306                 }
4307         }
4308
4309         return NULL;
4310
4311 found:
4312         if (shared_dpll[i].crtc_mask == 0)
4313                 shared_dpll[i].hw_state =
4314                         crtc_state->dpll_hw_state;
4315
4316         crtc_state->shared_dpll = i;
4317         DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
4318                          pipe_name(crtc->pipe));
4319
4320         shared_dpll[i].crtc_mask |= 1 << crtc->pipe;
4321
4322         return pll;
4323 }
4324
4325 static void intel_shared_dpll_commit(struct drm_atomic_state *state)
4326 {
4327         struct drm_i915_private *dev_priv = to_i915(state->dev);
4328         struct intel_shared_dpll_config *shared_dpll;
4329         struct intel_shared_dpll *pll;
4330         enum intel_dpll_id i;
4331
4332         if (!to_intel_atomic_state(state)->dpll_set)
4333                 return;
4334
4335         shared_dpll = to_intel_atomic_state(state)->shared_dpll;
4336         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
4337                 pll = &dev_priv->shared_dplls[i];
4338                 pll->config = shared_dpll[i];
4339         }
4340 }
4341
4342 static void cpt_verify_modeset(struct drm_device *dev, int pipe)
4343 {
4344         struct drm_i915_private *dev_priv = dev->dev_private;
4345         int dslreg = PIPEDSL(pipe);
4346         u32 temp;
4347
4348         temp = I915_READ(dslreg);
4349         udelay(500);
4350         if (wait_for(I915_READ(dslreg) != temp, 5)) {
4351                 if (wait_for(I915_READ(dslreg) != temp, 5))
4352                         DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
4353         }
4354 }
4355
4356 static int
4357 skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
4358                   unsigned scaler_user, int *scaler_id, unsigned int rotation,
4359                   int src_w, int src_h, int dst_w, int dst_h)
4360 {
4361         struct intel_crtc_scaler_state *scaler_state =
4362                 &crtc_state->scaler_state;
4363         struct intel_crtc *intel_crtc =
4364                 to_intel_crtc(crtc_state->base.crtc);
4365         int need_scaling;
4366
4367         need_scaling = intel_rotation_90_or_270(rotation) ?
4368                 (src_h != dst_w || src_w != dst_h):
4369                 (src_w != dst_w || src_h != dst_h);
4370
4371         /*
4372          * if plane is being disabled or scaler is no more required or force detach
4373          *  - free scaler binded to this plane/crtc
4374          *  - in order to do this, update crtc->scaler_usage
4375          *
4376          * Here scaler state in crtc_state is set free so that
4377          * scaler can be assigned to other user. Actual register
4378          * update to free the scaler is done in plane/panel-fit programming.
4379          * For this purpose crtc/plane_state->scaler_id isn't reset here.
4380          */
4381         if (force_detach || !need_scaling) {
4382                 if (*scaler_id >= 0) {
4383                         scaler_state->scaler_users &= ~(1 << scaler_user);
4384                         scaler_state->scalers[*scaler_id].in_use = 0;
4385
4386                         DRM_DEBUG_KMS("scaler_user index %u.%u: "
4387                                 "Staged freeing scaler id %d scaler_users = 0x%x\n",
4388                                 intel_crtc->pipe, scaler_user, *scaler_id,
4389                                 scaler_state->scaler_users);
4390                         *scaler_id = -1;
4391                 }
4392                 return 0;
4393         }
4394
4395         /* range checks */
4396         if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
4397                 dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
4398
4399                 src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
4400                 dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H) {
4401                 DRM_DEBUG_KMS("scaler_user index %u.%u: src %ux%u dst %ux%u "
4402                         "size is out of scaler range\n",
4403                         intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h);
4404                 return -EINVAL;
4405         }
4406
4407         /* mark this plane as a scaler user in crtc_state */
4408         scaler_state->scaler_users |= (1 << scaler_user);
4409         DRM_DEBUG_KMS("scaler_user index %u.%u: "
4410                 "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
4411                 intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
4412                 scaler_state->scaler_users);
4413
4414         return 0;
4415 }
4416
4417 /**
4418  * skl_update_scaler_crtc - Stages update to scaler state for a given crtc.
4419  *
4420  * @state: crtc's scaler state
4421  *
4422  * Return
4423  *     0 - scaler_usage updated successfully
4424  *    error - requested scaling cannot be supported or other error condition
4425  */
4426 int skl_update_scaler_crtc(struct intel_crtc_state *state)
4427 {
4428         struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc);
4429         const struct drm_display_mode *adjusted_mode = &state->base.adjusted_mode;
4430
4431         DRM_DEBUG_KMS("Updating scaler for [CRTC:%i] scaler_user index %u.%u\n",
4432                       intel_crtc->base.base.id, intel_crtc->pipe, SKL_CRTC_INDEX);
4433
4434         return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
4435                 &state->scaler_state.scaler_id, DRM_ROTATE_0,
4436                 state->pipe_src_w, state->pipe_src_h,
4437                 adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay);
4438 }
4439
4440 /**
4441  * skl_update_scaler_plane - Stages update to scaler state for a given plane.
4442  *
4443  * @state: crtc's scaler state
4444  * @plane_state: atomic plane state to update
4445  *
4446  * Return
4447  *     0 - scaler_usage updated successfully
4448  *    error - requested scaling cannot be supported or other error condition
4449  */
4450 static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
4451                                    struct intel_plane_state *plane_state)
4452 {
4453
4454         struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
4455         struct intel_plane *intel_plane =
4456                 to_intel_plane(plane_state->base.plane);
4457         struct drm_framebuffer *fb = plane_state->base.fb;
4458         int ret;
4459
4460         bool force_detach = !fb || !plane_state->visible;
4461
4462         DRM_DEBUG_KMS("Updating scaler for [PLANE:%d] scaler_user index %u.%u\n",
4463                       intel_plane->base.base.id, intel_crtc->pipe,
4464                       drm_plane_index(&intel_plane->base));
4465
4466         ret = skl_update_scaler(crtc_state, force_detach,
4467                                 drm_plane_index(&intel_plane->base),
4468                                 &plane_state->scaler_id,
4469                                 plane_state->base.rotation,
4470                                 drm_rect_width(&plane_state->src) >> 16,
4471                                 drm_rect_height(&plane_state->src) >> 16,
4472                                 drm_rect_width(&plane_state->dst),
4473                                 drm_rect_height(&plane_state->dst));
4474
4475         if (ret || plane_state->scaler_id < 0)
4476                 return ret;
4477
4478         /* check colorkey */
4479         if (plane_state->ckey.flags != I915_SET_COLORKEY_NONE) {
4480                 DRM_DEBUG_KMS("[PLANE:%d] scaling with color key not allowed",
4481                               intel_plane->base.base.id);
4482                 return -EINVAL;
4483         }
4484
4485         /* Check src format */
4486         switch (fb->pixel_format) {
4487         case DRM_FORMAT_RGB565:
4488         case DRM_FORMAT_XBGR8888:
4489         case DRM_FORMAT_XRGB8888:
4490         case DRM_FORMAT_ABGR8888:
4491         case DRM_FORMAT_ARGB8888:
4492         case DRM_FORMAT_XRGB2101010:
4493         case DRM_FORMAT_XBGR2101010:
4494         case DRM_FORMAT_YUYV:
4495         case DRM_FORMAT_YVYU:
4496         case DRM_FORMAT_UYVY:
4497         case DRM_FORMAT_VYUY:
4498                 break;
4499         default:
4500                 DRM_DEBUG_KMS("[PLANE:%d] FB:%d unsupported scaling format 0x%x\n",
4501                         intel_plane->base.base.id, fb->base.id, fb->pixel_format);
4502                 return -EINVAL;
4503         }
4504
4505         return 0;
4506 }
4507
4508 static void skylake_scaler_disable(struct intel_crtc *crtc)
4509 {
4510         int i;
4511
4512         for (i = 0; i < crtc->num_scalers; i++)
4513                 skl_detach_scaler(crtc, i);
4514 }
4515
4516 static void skylake_pfit_enable(struct intel_crtc *crtc)
4517 {
4518         struct drm_device *dev = crtc->base.dev;
4519         struct drm_i915_private *dev_priv = dev->dev_private;
4520         int pipe = crtc->pipe;
4521         struct intel_crtc_scaler_state *scaler_state =
4522                 &crtc->config->scaler_state;
4523
4524         DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
4525
4526         if (crtc->config->pch_pfit.enabled) {
4527                 int id;
4528
4529                 if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) {
4530                         DRM_ERROR("Requesting pfit without getting a scaler first\n");
4531                         return;
4532                 }
4533
4534                 id = scaler_state->scaler_id;
4535                 I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
4536                         PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
4537                 I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
4538                 I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
4539
4540                 DRM_DEBUG_KMS("for crtc_state = %p scaler_id = %d\n", crtc->config, id);
4541         }
4542 }
4543
4544 static void ironlake_pfit_enable(struct intel_crtc *crtc)
4545 {
4546         struct drm_device *dev = crtc->base.dev;
4547         struct drm_i915_private *dev_priv = dev->dev_private;
4548         int pipe = crtc->pipe;
4549
4550         if (crtc->config->pch_pfit.enabled) {
4551                 /* Force use of hard-coded filter coefficients
4552                  * as some pre-programmed values are broken,
4553                  * e.g. x201.
4554                  */
4555                 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
4556                         I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
4557                                                  PF_PIPE_SEL_IVB(pipe));
4558                 else
4559                         I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
4560                 I915_WRITE(PF_WIN_POS(pipe), crtc->config->pch_pfit.pos);
4561                 I915_WRITE(PF_WIN_SZ(pipe), crtc->config->pch_pfit.size);
4562         }
4563 }
4564
4565 void hsw_enable_ips(struct intel_crtc *crtc)
4566 {
4567         struct drm_device *dev = crtc->base.dev;
4568         struct drm_i915_private *dev_priv = dev->dev_private;
4569
4570         if (!crtc->config->ips_enabled)
4571                 return;
4572
4573         /* We can only enable IPS after we enable a plane and wait for a vblank */
4574         intel_wait_for_vblank(dev, crtc->pipe);
4575
4576         assert_plane_enabled(dev_priv, crtc->plane);
4577         if (IS_BROADWELL(dev)) {
4578                 mutex_lock(&dev_priv->rps.hw_lock);
4579                 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0xc0000000));
4580                 mutex_unlock(&dev_priv->rps.hw_lock);
4581                 /* Quoting Art Runyan: "its not safe to expect any particular
4582                  * value in IPS_CTL bit 31 after enabling IPS through the
4583                  * mailbox." Moreover, the mailbox may return a bogus state,
4584                  * so we need to just enable it and continue on.
4585                  */
4586         } else {
4587                 I915_WRITE(IPS_CTL, IPS_ENABLE);
4588                 /* The bit only becomes 1 in the next vblank, so this wait here
4589                  * is essentially intel_wait_for_vblank. If we don't have this
4590                  * and don't wait for vblanks until the end of crtc_enable, then
4591                  * the HW state readout code will complain that the expected
4592                  * IPS_CTL value is not the one we read. */
4593                 if (wait_for(I915_READ_NOTRACE(IPS_CTL) & IPS_ENABLE, 50))
4594                         DRM_ERROR("Timed out waiting for IPS enable\n");
4595         }
4596 }
4597
4598 void hsw_disable_ips(struct intel_crtc *crtc)
4599 {
4600         struct drm_device *dev = crtc->base.dev;
4601         struct drm_i915_private *dev_priv = dev->dev_private;
4602
4603         if (!crtc->config->ips_enabled)
4604                 return;
4605
4606         assert_plane_enabled(dev_priv, crtc->plane);
4607         if (IS_BROADWELL(dev)) {
4608                 mutex_lock(&dev_priv->rps.hw_lock);
4609                 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
4610                 mutex_unlock(&dev_priv->rps.hw_lock);
4611                 /* wait for pcode to finish disabling IPS, which may take up to 42ms */
4612                 if (wait_for((I915_READ(IPS_CTL) & IPS_ENABLE) == 0, 42))
4613                         DRM_ERROR("Timed out waiting for IPS disable\n");
4614         } else {
4615                 I915_WRITE(IPS_CTL, 0);
4616                 POSTING_READ(IPS_CTL);
4617         }
4618
4619         /* We need to wait for a vblank before we can disable the plane. */
4620         intel_wait_for_vblank(dev, crtc->pipe);
4621 }
4622
4623 /** Loads the palette/gamma unit for the CRTC with the prepared values */
4624 static void intel_crtc_load_lut(struct drm_crtc *crtc)
4625 {
4626         struct drm_device *dev = crtc->dev;
4627         struct drm_i915_private *dev_priv = dev->dev_private;
4628         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4629         enum pipe pipe = intel_crtc->pipe;
4630         int i;
4631         bool reenable_ips = false;
4632
4633         /* The clocks have to be on to load the palette. */
4634         if (!crtc->state->active)
4635                 return;
4636
4637         if (HAS_GMCH_DISPLAY(dev_priv->dev)) {
4638                 if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI))
4639                         assert_dsi_pll_enabled(dev_priv);
4640                 else
4641                         assert_pll_enabled(dev_priv, pipe);
4642         }
4643
4644         /* Workaround : Do not read or write the pipe palette/gamma data while
4645          * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
4646          */
4647         if (IS_HASWELL(dev) && intel_crtc->config->ips_enabled &&
4648             ((I915_READ(GAMMA_MODE(pipe)) & GAMMA_MODE_MODE_MASK) ==
4649              GAMMA_MODE_MODE_SPLIT)) {
4650                 hsw_disable_ips(intel_crtc);
4651                 reenable_ips = true;
4652         }
4653
4654         for (i = 0; i < 256; i++) {
4655                 u32 palreg;
4656
4657                 if (HAS_GMCH_DISPLAY(dev))
4658                         palreg = PALETTE(pipe, i);
4659                 else
4660                         palreg = LGC_PALETTE(pipe, i);
4661
4662                 I915_WRITE(palreg,
4663                            (intel_crtc->lut_r[i] << 16) |
4664                            (intel_crtc->lut_g[i] << 8) |
4665                            intel_crtc->lut_b[i]);
4666         }
4667
4668         if (reenable_ips)
4669                 hsw_enable_ips(intel_crtc);
4670 }
4671
4672 static void intel_crtc_dpms_overlay_disable(struct intel_crtc *intel_crtc)
4673 {
4674         if (intel_crtc->overlay) {
4675                 struct drm_device *dev = intel_crtc->base.dev;
4676                 struct drm_i915_private *dev_priv = dev->dev_private;
4677
4678                 mutex_lock(&dev->struct_mutex);
4679                 dev_priv->mm.interruptible = false;
4680                 (void) intel_overlay_switch_off(intel_crtc->overlay);
4681                 dev_priv->mm.interruptible = true;
4682                 mutex_unlock(&dev->struct_mutex);
4683         }
4684
4685         /* Let userspace switch the overlay on again. In most cases userspace
4686          * has to recompute where to put it anyway.
4687          */
4688 }
4689
4690 /**
4691  * intel_post_enable_primary - Perform operations after enabling primary plane
4692  * @crtc: the CRTC whose primary plane was just enabled
4693  *
4694  * Performs potentially sleeping operations that must be done after the primary
4695  * plane is enabled, such as updating FBC and IPS.  Note that this may be
4696  * called due to an explicit primary plane update, or due to an implicit
4697  * re-enable that is caused when a sprite plane is updated to no longer
4698  * completely hide the primary plane.
4699  */
4700 static void
4701 intel_post_enable_primary(struct drm_crtc *crtc)
4702 {
4703         struct drm_device *dev = crtc->dev;
4704         struct drm_i915_private *dev_priv = dev->dev_private;
4705         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4706         int pipe = intel_crtc->pipe;
4707
4708         /*
4709          * BDW signals flip done immediately if the plane
4710          * is disabled, even if the plane enable is already
4711          * armed to occur at the next vblank :(
4712          */
4713         if (IS_BROADWELL(dev))
4714                 intel_wait_for_vblank(dev, pipe);
4715
4716         /*
4717          * FIXME IPS should be fine as long as one plane is
4718          * enabled, but in practice it seems to have problems
4719          * when going from primary only to sprite only and vice
4720          * versa.
4721          */
4722         hsw_enable_ips(intel_crtc);
4723
4724         /*
4725          * Gen2 reports pipe underruns whenever all planes are disabled.
4726          * So don't enable underrun reporting before at least some planes
4727          * are enabled.
4728          * FIXME: Need to fix the logic to work when we turn off all planes
4729          * but leave the pipe running.
4730          */
4731         if (IS_GEN2(dev))
4732                 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4733
4734         /* Underruns don't raise interrupts, so check manually. */
4735         if (HAS_GMCH_DISPLAY(dev))
4736                 i9xx_check_fifo_underruns(dev_priv);
4737 }
4738
4739 /**
4740  * intel_pre_disable_primary - Perform operations before disabling primary plane
4741  * @crtc: the CRTC whose primary plane is to be disabled
4742  *
4743  * Performs potentially sleeping operations that must be done before the
4744  * primary plane is disabled, such as updating FBC and IPS.  Note that this may
4745  * be called due to an explicit primary plane update, or due to an implicit
4746  * disable that is caused when a sprite plane completely hides the primary
4747  * plane.
4748  */
4749 static void
4750 intel_pre_disable_primary(struct drm_crtc *crtc)
4751 {
4752         struct drm_device *dev = crtc->dev;
4753         struct drm_i915_private *dev_priv = dev->dev_private;
4754         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4755         int pipe = intel_crtc->pipe;
4756
4757         /*
4758          * Gen2 reports pipe underruns whenever all planes are disabled.
4759          * So diasble underrun reporting before all the planes get disabled.
4760          * FIXME: Need to fix the logic to work when we turn off all planes
4761          * but leave the pipe running.
4762          */
4763         if (IS_GEN2(dev))
4764                 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
4765
4766         /*
4767          * Vblank time updates from the shadow to live plane control register
4768          * are blocked if the memory self-refresh mode is active at that
4769          * moment. So to make sure the plane gets truly disabled, disable
4770          * first the self-refresh mode. The self-refresh enable bit in turn
4771          * will be checked/applied by the HW only at the next frame start
4772          * event which is after the vblank start event, so we need to have a
4773          * wait-for-vblank between disabling the plane and the pipe.
4774          */
4775         if (HAS_GMCH_DISPLAY(dev)) {
4776                 intel_set_memory_cxsr(dev_priv, false);
4777                 dev_priv->wm.vlv.cxsr = false;
4778                 intel_wait_for_vblank(dev, pipe);
4779         }
4780
4781         /*
4782          * FIXME IPS should be fine as long as one plane is
4783          * enabled, but in practice it seems to have problems
4784          * when going from primary only to sprite only and vice
4785          * versa.
4786          */
4787         hsw_disable_ips(intel_crtc);
4788 }
4789
4790 static void intel_post_plane_update(struct intel_crtc *crtc)
4791 {
4792         struct intel_crtc_atomic_commit *atomic = &crtc->atomic;
4793         struct drm_device *dev = crtc->base.dev;
4794         struct drm_i915_private *dev_priv = dev->dev_private;
4795         struct drm_plane *plane;
4796
4797         if (atomic->wait_vblank)
4798                 intel_wait_for_vblank(dev, crtc->pipe);
4799
4800         intel_frontbuffer_flip(dev, atomic->fb_bits);
4801
4802         if (atomic->disable_cxsr)
4803                 crtc->wm.cxsr_allowed = true;
4804
4805         if (crtc->atomic.update_wm_post)
4806                 intel_update_watermarks(&crtc->base);
4807
4808         if (atomic->update_fbc)
4809                 intel_fbc_update(dev_priv);
4810
4811         if (atomic->post_enable_primary)
4812                 intel_post_enable_primary(&crtc->base);
4813
4814         drm_for_each_plane_mask(plane, dev, atomic->update_sprite_watermarks)
4815                 intel_update_sprite_watermarks(plane, &crtc->base,
4816                                                0, 0, 0, false, false);
4817
4818         memset(atomic, 0, sizeof(*atomic));
4819 }
4820
4821 static void intel_pre_plane_update(struct intel_crtc *crtc)
4822 {
4823         struct drm_device *dev = crtc->base.dev;
4824         struct drm_i915_private *dev_priv = dev->dev_private;
4825         struct intel_crtc_atomic_commit *atomic = &crtc->atomic;
4826         struct drm_plane *p;
4827
4828         /* Track fb's for any planes being disabled */
4829         drm_for_each_plane_mask(p, dev, atomic->disabled_planes) {
4830                 struct intel_plane *plane = to_intel_plane(p);
4831
4832                 mutex_lock(&dev->struct_mutex);
4833                 i915_gem_track_fb(intel_fb_obj(plane->base.fb), NULL,
4834                                   plane->frontbuffer_bit);
4835                 mutex_unlock(&dev->struct_mutex);
4836         }
4837
4838         if (atomic->wait_for_flips)
4839                 intel_crtc_wait_for_pending_flips(&crtc->base);
4840
4841         if (atomic->disable_fbc)
4842                 intel_fbc_disable_crtc(crtc);
4843
4844         if (crtc->atomic.disable_ips)
4845                 hsw_disable_ips(crtc);
4846
4847         if (atomic->pre_disable_primary)
4848                 intel_pre_disable_primary(&crtc->base);
4849
4850         if (atomic->disable_cxsr) {
4851                 crtc->wm.cxsr_allowed = false;
4852                 intel_set_memory_cxsr(dev_priv, false);
4853         }
4854 }
4855
4856 static void intel_crtc_disable_planes(struct drm_crtc *crtc, unsigned plane_mask)
4857 {
4858         struct drm_device *dev = crtc->dev;
4859         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4860         struct drm_plane *p;
4861         int pipe = intel_crtc->pipe;
4862
4863         intel_crtc_dpms_overlay_disable(intel_crtc);
4864
4865         drm_for_each_plane_mask(p, dev, plane_mask)
4866                 to_intel_plane(p)->disable_plane(p, crtc);
4867
4868         /*
4869          * FIXME: Once we grow proper nuclear flip support out of this we need
4870          * to compute the mask of flip planes precisely. For the time being
4871          * consider this a flip to a NULL plane.
4872          */
4873         intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
4874 }
4875
4876 static void ironlake_crtc_enable(struct drm_crtc *crtc)
4877 {
4878         struct drm_device *dev = crtc->dev;
4879         struct drm_i915_private *dev_priv = dev->dev_private;
4880         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4881         struct intel_encoder *encoder;
4882         int pipe = intel_crtc->pipe;
4883
4884         if (WARN_ON(intel_crtc->active))
4885                 return;
4886
4887         if (intel_crtc->config->has_pch_encoder)
4888                 intel_prepare_shared_dpll(intel_crtc);
4889
4890         if (intel_crtc->config->has_dp_encoder)
4891                 intel_dp_set_m_n(intel_crtc, M1_N1);
4892
4893         intel_set_pipe_timings(intel_crtc);
4894
4895         if (intel_crtc->config->has_pch_encoder) {
4896                 intel_cpu_transcoder_set_m_n(intel_crtc,
4897                                      &intel_crtc->config->fdi_m_n, NULL);
4898         }
4899
4900         ironlake_set_pipeconf(crtc);
4901
4902         intel_crtc->active = true;
4903
4904         intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4905         intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
4906
4907         for_each_encoder_on_crtc(dev, crtc, encoder)
4908                 if (encoder->pre_enable)
4909                         encoder->pre_enable(encoder);
4910
4911         if (intel_crtc->config->has_pch_encoder) {
4912                 /* Note: FDI PLL enabling _must_ be done before we enable the
4913                  * cpu pipes, hence this is separate from all the other fdi/pch
4914                  * enabling. */
4915                 ironlake_fdi_pll_enable(intel_crtc);
4916         } else {
4917                 assert_fdi_tx_disabled(dev_priv, pipe);
4918                 assert_fdi_rx_disabled(dev_priv, pipe);
4919         }
4920
4921         ironlake_pfit_enable(intel_crtc);
4922
4923         /*
4924          * On ILK+ LUT must be loaded before the pipe is running but with
4925          * clocks enabled
4926          */
4927         intel_crtc_load_lut(crtc);
4928
4929         intel_update_watermarks(crtc);
4930         intel_enable_pipe(intel_crtc);
4931
4932         if (intel_crtc->config->has_pch_encoder)
4933                 ironlake_pch_enable(crtc);
4934
4935         assert_vblank_disabled(crtc);
4936         drm_crtc_vblank_on(crtc);
4937
4938         for_each_encoder_on_crtc(dev, crtc, encoder)
4939                 encoder->enable(encoder);
4940
4941         if (HAS_PCH_CPT(dev))
4942                 cpt_verify_modeset(dev, intel_crtc->pipe);
4943 }
4944
4945 /* IPS only exists on ULT machines and is tied to pipe A. */
4946 static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
4947 {
4948         return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
4949 }
4950
4951 static void haswell_crtc_enable(struct drm_crtc *crtc)
4952 {
4953         struct drm_device *dev = crtc->dev;
4954         struct drm_i915_private *dev_priv = dev->dev_private;
4955         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4956         struct intel_encoder *encoder;
4957         int pipe = intel_crtc->pipe, hsw_workaround_pipe;
4958         struct intel_crtc_state *pipe_config =
4959                 to_intel_crtc_state(crtc->state);
4960         bool is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
4961
4962         if (WARN_ON(intel_crtc->active))
4963                 return;
4964
4965         if (intel_crtc_to_shared_dpll(intel_crtc))
4966                 intel_enable_shared_dpll(intel_crtc);
4967
4968         if (intel_crtc->config->has_dp_encoder)
4969                 intel_dp_set_m_n(intel_crtc, M1_N1);
4970
4971         intel_set_pipe_timings(intel_crtc);
4972
4973         if (intel_crtc->config->cpu_transcoder != TRANSCODER_EDP) {
4974                 I915_WRITE(PIPE_MULT(intel_crtc->config->cpu_transcoder),
4975                            intel_crtc->config->pixel_multiplier - 1);
4976         }
4977
4978         if (intel_crtc->config->has_pch_encoder) {
4979                 intel_cpu_transcoder_set_m_n(intel_crtc,
4980                                      &intel_crtc->config->fdi_m_n, NULL);
4981         }
4982
4983         haswell_set_pipeconf(crtc);
4984
4985         intel_set_pipe_csc(crtc);
4986
4987         intel_crtc->active = true;
4988
4989         intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4990         for_each_encoder_on_crtc(dev, crtc, encoder) {
4991                 if (encoder->pre_pll_enable)
4992                         encoder->pre_pll_enable(encoder);
4993                 if (encoder->pre_enable)
4994                         encoder->pre_enable(encoder);
4995         }
4996
4997         if (intel_crtc->config->has_pch_encoder) {
4998                 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
4999                                                       true);
5000                 dev_priv->display.fdi_link_train(crtc);
5001         }
5002
5003         if (!is_dsi)
5004                 intel_ddi_enable_pipe_clock(intel_crtc);
5005
5006         if (INTEL_INFO(dev)->gen >= 9)
5007                 skylake_pfit_enable(intel_crtc);
5008         else
5009                 ironlake_pfit_enable(intel_crtc);
5010
5011         /*
5012          * On ILK+ LUT must be loaded before the pipe is running but with
5013          * clocks enabled
5014          */
5015         intel_crtc_load_lut(crtc);
5016
5017         intel_ddi_set_pipe_settings(crtc);
5018         if (!is_dsi)
5019                 intel_ddi_enable_transcoder_func(crtc);
5020
5021         intel_update_watermarks(crtc);
5022         intel_enable_pipe(intel_crtc);
5023
5024         if (intel_crtc->config->has_pch_encoder)
5025                 lpt_pch_enable(crtc);
5026
5027         if (intel_crtc->config->dp_encoder_is_mst && !is_dsi)
5028                 intel_ddi_set_vc_payload_alloc(crtc, true);
5029
5030         assert_vblank_disabled(crtc);
5031         drm_crtc_vblank_on(crtc);
5032
5033         for_each_encoder_on_crtc(dev, crtc, encoder) {
5034                 encoder->enable(encoder);
5035                 intel_opregion_notify_encoder(encoder, true);
5036         }
5037
5038         /* If we change the relative order between pipe/planes enabling, we need
5039          * to change the workaround. */
5040         hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
5041         if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
5042                 intel_wait_for_vblank(dev, hsw_workaround_pipe);
5043                 intel_wait_for_vblank(dev, hsw_workaround_pipe);
5044         }
5045 }
5046
5047 static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force)
5048 {
5049         struct drm_device *dev = crtc->base.dev;
5050         struct drm_i915_private *dev_priv = dev->dev_private;
5051         int pipe = crtc->pipe;
5052
5053         /* To avoid upsetting the power well on haswell only disable the pfit if
5054          * it's in use. The hw state code will make sure we get this right. */
5055         if (force || crtc->config->pch_pfit.enabled) {
5056                 I915_WRITE(PF_CTL(pipe), 0);
5057                 I915_WRITE(PF_WIN_POS(pipe), 0);
5058                 I915_WRITE(PF_WIN_SZ(pipe), 0);
5059         }
5060 }
5061
5062 static void ironlake_crtc_disable(struct drm_crtc *crtc)
5063 {
5064         struct drm_device *dev = crtc->dev;
5065         struct drm_i915_private *dev_priv = dev->dev_private;
5066         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5067         struct intel_encoder *encoder;
5068         int pipe = intel_crtc->pipe;
5069         u32 reg, temp;
5070
5071         for_each_encoder_on_crtc(dev, crtc, encoder)
5072                 encoder->disable(encoder);
5073
5074         drm_crtc_vblank_off(crtc);
5075         assert_vblank_disabled(crtc);
5076
5077         if (intel_crtc->config->has_pch_encoder)
5078                 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
5079
5080         intel_disable_pipe(intel_crtc);
5081
5082         ironlake_pfit_disable(intel_crtc, false);
5083
5084         if (intel_crtc->config->has_pch_encoder)
5085                 ironlake_fdi_disable(crtc);
5086
5087         for_each_encoder_on_crtc(dev, crtc, encoder)
5088                 if (encoder->post_disable)
5089                         encoder->post_disable(encoder);
5090
5091         if (intel_crtc->config->has_pch_encoder) {
5092                 ironlake_disable_pch_transcoder(dev_priv, pipe);
5093
5094                 if (HAS_PCH_CPT(dev)) {
5095                         /* disable TRANS_DP_CTL */
5096                         reg = TRANS_DP_CTL(pipe);
5097                         temp = I915_READ(reg);
5098                         temp &= ~(TRANS_DP_OUTPUT_ENABLE |
5099                                   TRANS_DP_PORT_SEL_MASK);
5100                         temp |= TRANS_DP_PORT_SEL_NONE;
5101                         I915_WRITE(reg, temp);
5102
5103                         /* disable DPLL_SEL */
5104                         temp = I915_READ(PCH_DPLL_SEL);
5105                         temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
5106                         I915_WRITE(PCH_DPLL_SEL, temp);
5107                 }
5108
5109                 ironlake_fdi_pll_disable(intel_crtc);
5110         }
5111 }
5112
5113 static void haswell_crtc_disable(struct drm_crtc *crtc)
5114 {
5115         struct drm_device *dev = crtc->dev;
5116         struct drm_i915_private *dev_priv = dev->dev_private;
5117         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5118         struct intel_encoder *encoder;
5119         enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
5120         bool is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
5121
5122         for_each_encoder_on_crtc(dev, crtc, encoder) {
5123                 intel_opregion_notify_encoder(encoder, false);
5124                 encoder->disable(encoder);
5125         }
5126
5127         drm_crtc_vblank_off(crtc);
5128         assert_vblank_disabled(crtc);
5129
5130         if (intel_crtc->config->has_pch_encoder)
5131                 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
5132                                                       false);
5133         intel_disable_pipe(intel_crtc);
5134
5135         if (intel_crtc->config->dp_encoder_is_mst)
5136                 intel_ddi_set_vc_payload_alloc(crtc, false);
5137
5138         if (!is_dsi)
5139                 intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
5140
5141         if (INTEL_INFO(dev)->gen >= 9)
5142                 skylake_scaler_disable(intel_crtc);
5143         else
5144                 ironlake_pfit_disable(intel_crtc, false);
5145
5146         if (!is_dsi)
5147                 intel_ddi_disable_pipe_clock(intel_crtc);
5148
5149         if (intel_crtc->config->has_pch_encoder) {
5150                 lpt_disable_pch_transcoder(dev_priv);
5151                 intel_ddi_fdi_disable(crtc);
5152         }
5153
5154         for_each_encoder_on_crtc(dev, crtc, encoder)
5155                 if (encoder->post_disable)
5156                         encoder->post_disable(encoder);
5157 }
5158
5159 static void i9xx_pfit_enable(struct intel_crtc *crtc)
5160 {
5161         struct drm_device *dev = crtc->base.dev;
5162         struct drm_i915_private *dev_priv = dev->dev_private;
5163         struct intel_crtc_state *pipe_config = crtc->config;
5164
5165         if (!pipe_config->gmch_pfit.control)
5166                 return;
5167
5168         /*
5169          * The panel fitter should only be adjusted whilst the pipe is disabled,
5170          * according to register description and PRM.
5171          */
5172         WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
5173         assert_pipe_disabled(dev_priv, crtc->pipe);
5174
5175         I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
5176         I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
5177
5178         /* Border color in case we don't scale up to the full screen. Black by
5179          * default, change to something else for debugging. */
5180         I915_WRITE(BCLRPAT(crtc->pipe), 0);
5181 }
5182
5183 static enum intel_display_power_domain port_to_power_domain(enum port port)
5184 {
5185         switch (port) {
5186         case PORT_A:
5187                 return POWER_DOMAIN_PORT_DDI_A_4_LANES;
5188         case PORT_B:
5189                 return POWER_DOMAIN_PORT_DDI_B_4_LANES;
5190         case PORT_C:
5191                 return POWER_DOMAIN_PORT_DDI_C_4_LANES;
5192         case PORT_D:
5193                 return POWER_DOMAIN_PORT_DDI_D_4_LANES;
5194         case PORT_E:
5195                 return POWER_DOMAIN_PORT_DDI_E_2_LANES;
5196         default:
5197                 MISSING_CASE(port);
5198                 return POWER_DOMAIN_PORT_OTHER;
5199         }
5200 }
5201
5202 static enum intel_display_power_domain port_to_aux_power_domain(enum port port)
5203 {
5204         switch (port) {
5205         case PORT_A:
5206                 return POWER_DOMAIN_AUX_A;
5207         case PORT_B:
5208                 return POWER_DOMAIN_AUX_B;
5209         case PORT_C:
5210                 return POWER_DOMAIN_AUX_C;
5211         case PORT_D:
5212                 return POWER_DOMAIN_AUX_D;
5213         case PORT_E:
5214                 /* FIXME: Check VBT for actual wiring of PORT E */
5215                 return POWER_DOMAIN_AUX_D;
5216         default:
5217                 MISSING_CASE(port);
5218                 return POWER_DOMAIN_AUX_A;
5219         }
5220 }
5221
5222 #define for_each_power_domain(domain, mask)                             \
5223         for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++)     \
5224                 if ((1 << (domain)) & (mask))
5225
5226 enum intel_display_power_domain
5227 intel_display_port_power_domain(struct intel_encoder *intel_encoder)
5228 {
5229         struct drm_device *dev = intel_encoder->base.dev;
5230         struct intel_digital_port *intel_dig_port;
5231
5232         switch (intel_encoder->type) {
5233         case INTEL_OUTPUT_UNKNOWN:
5234                 /* Only DDI platforms should ever use this output type */
5235                 WARN_ON_ONCE(!HAS_DDI(dev));
5236         case INTEL_OUTPUT_DISPLAYPORT:
5237         case INTEL_OUTPUT_HDMI:
5238         case INTEL_OUTPUT_EDP:
5239                 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
5240                 return port_to_power_domain(intel_dig_port->port);
5241         case INTEL_OUTPUT_DP_MST:
5242                 intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
5243                 return port_to_power_domain(intel_dig_port->port);
5244         case INTEL_OUTPUT_ANALOG:
5245                 return POWER_DOMAIN_PORT_CRT;
5246         case INTEL_OUTPUT_DSI:
5247                 return POWER_DOMAIN_PORT_DSI;
5248         default:
5249                 return POWER_DOMAIN_PORT_OTHER;
5250         }
5251 }
5252
5253 enum intel_display_power_domain
5254 intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
5255 {
5256         struct drm_device *dev = intel_encoder->base.dev;
5257         struct intel_digital_port *intel_dig_port;
5258
5259         switch (intel_encoder->type) {
5260         case INTEL_OUTPUT_UNKNOWN:
5261         case INTEL_OUTPUT_HDMI:
5262                 /*
5263                  * Only DDI platforms should ever use these output types.
5264                  * We can get here after the HDMI detect code has already set
5265                  * the type of the shared encoder. Since we can't be sure
5266                  * what's the status of the given connectors, play safe and
5267                  * run the DP detection too.
5268                  */
5269                 WARN_ON_ONCE(!HAS_DDI(dev));
5270         case INTEL_OUTPUT_DISPLAYPORT:
5271         case INTEL_OUTPUT_EDP:
5272                 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
5273                 return port_to_aux_power_domain(intel_dig_port->port);
5274         case INTEL_OUTPUT_DP_MST:
5275                 intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
5276                 return port_to_aux_power_domain(intel_dig_port->port);
5277         default:
5278                 MISSING_CASE(intel_encoder->type);
5279                 return POWER_DOMAIN_AUX_A;
5280         }
5281 }
5282
5283 static unsigned long get_crtc_power_domains(struct drm_crtc *crtc)
5284 {
5285         struct drm_device *dev = crtc->dev;
5286         struct intel_encoder *intel_encoder;
5287         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5288         enum pipe pipe = intel_crtc->pipe;
5289         unsigned long mask;
5290         enum transcoder transcoder;
5291
5292         if (!crtc->state->active)
5293                 return 0;
5294
5295         transcoder = intel_pipe_to_cpu_transcoder(dev->dev_private, pipe);
5296
5297         mask = BIT(POWER_DOMAIN_PIPE(pipe));
5298         mask |= BIT(POWER_DOMAIN_TRANSCODER(transcoder));
5299         if (intel_crtc->config->pch_pfit.enabled ||
5300             intel_crtc->config->pch_pfit.force_thru)
5301                 mask |= BIT(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
5302
5303         for_each_encoder_on_crtc(dev, crtc, intel_encoder)
5304                 mask |= BIT(intel_display_port_power_domain(intel_encoder));
5305
5306         return mask;
5307 }
5308
5309 static unsigned long modeset_get_crtc_power_domains(struct drm_crtc *crtc)
5310 {
5311         struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5312         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5313         enum intel_display_power_domain domain;
5314         unsigned long domains, new_domains, old_domains;
5315
5316         old_domains = intel_crtc->enabled_power_domains;
5317         intel_crtc->enabled_power_domains = new_domains = get_crtc_power_domains(crtc);
5318
5319         domains = new_domains & ~old_domains;
5320
5321         for_each_power_domain(domain, domains)
5322                 intel_display_power_get(dev_priv, domain);
5323
5324         return old_domains & ~new_domains;
5325 }
5326
5327 static void modeset_put_power_domains(struct drm_i915_private *dev_priv,
5328                                       unsigned long domains)
5329 {
5330         enum intel_display_power_domain domain;
5331
5332         for_each_power_domain(domain, domains)
5333                 intel_display_power_put(dev_priv, domain);
5334 }
5335
5336 static void modeset_update_crtc_power_domains(struct drm_atomic_state *state)
5337 {
5338         struct drm_device *dev = state->dev;
5339         struct drm_i915_private *dev_priv = dev->dev_private;
5340         unsigned long put_domains[I915_MAX_PIPES] = {};
5341         struct drm_crtc_state *crtc_state;
5342         struct drm_crtc *crtc;
5343         int i;
5344
5345         for_each_crtc_in_state(state, crtc, crtc_state, i) {
5346                 if (needs_modeset(crtc->state))
5347                         put_domains[to_intel_crtc(crtc)->pipe] =
5348                                 modeset_get_crtc_power_domains(crtc);
5349         }
5350
5351         if (dev_priv->display.modeset_commit_cdclk) {
5352                 unsigned int cdclk = to_intel_atomic_state(state)->cdclk;
5353
5354                 if (cdclk != dev_priv->cdclk_freq &&
5355                     !WARN_ON(!state->allow_modeset))
5356                         dev_priv->display.modeset_commit_cdclk(state);
5357         }
5358
5359         for (i = 0; i < I915_MAX_PIPES; i++)
5360                 if (put_domains[i])
5361                         modeset_put_power_domains(dev_priv, put_domains[i]);
5362 }
5363
5364 static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
5365 {
5366         int max_cdclk_freq = dev_priv->max_cdclk_freq;
5367
5368         if (INTEL_INFO(dev_priv)->gen >= 9 ||
5369             IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
5370                 return max_cdclk_freq;
5371         else if (IS_CHERRYVIEW(dev_priv))
5372                 return max_cdclk_freq*95/100;
5373         else if (INTEL_INFO(dev_priv)->gen < 4)
5374                 return 2*max_cdclk_freq*90/100;
5375         else
5376                 return max_cdclk_freq*90/100;
5377 }
5378
5379 static void intel_update_max_cdclk(struct drm_device *dev)
5380 {
5381         struct drm_i915_private *dev_priv = dev->dev_private;
5382
5383         if (IS_SKYLAKE(dev)) {
5384                 u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
5385
5386                 if (limit == SKL_DFSM_CDCLK_LIMIT_675)
5387                         dev_priv->max_cdclk_freq = 675000;
5388                 else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
5389                         dev_priv->max_cdclk_freq = 540000;
5390                 else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
5391                         dev_priv->max_cdclk_freq = 450000;
5392                 else
5393                         dev_priv->max_cdclk_freq = 337500;
5394         } else if (IS_BROADWELL(dev))  {
5395                 /*
5396                  * FIXME with extra cooling we can allow
5397                  * 540 MHz for ULX and 675 Mhz for ULT.
5398                  * How can we know if extra cooling is
5399                  * available? PCI ID, VTB, something else?
5400                  */
5401                 if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
5402                         dev_priv->max_cdclk_freq = 450000;
5403                 else if (IS_BDW_ULX(dev))
5404                         dev_priv->max_cdclk_freq = 450000;
5405                 else if (IS_BDW_ULT(dev))
5406                         dev_priv->max_cdclk_freq = 540000;
5407                 else
5408                         dev_priv->max_cdclk_freq = 675000;
5409         } else if (IS_CHERRYVIEW(dev)) {
5410                 dev_priv->max_cdclk_freq = 320000;
5411         } else if (IS_VALLEYVIEW(dev)) {
5412                 dev_priv->max_cdclk_freq = 400000;
5413         } else {
5414                 /* otherwise assume cdclk is fixed */
5415                 dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
5416         }
5417
5418         dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
5419
5420         DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
5421                          dev_priv->max_cdclk_freq);
5422
5423         DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n",
5424                          dev_priv->max_dotclk_freq);
5425 }
5426
5427 static void intel_update_cdclk(struct drm_device *dev)
5428 {
5429         struct drm_i915_private *dev_priv = dev->dev_private;
5430
5431         dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
5432         DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
5433                          dev_priv->cdclk_freq);
5434
5435         /*
5436          * Program the gmbus_freq based on the cdclk frequency.
5437          * BSpec erroneously claims we should aim for 4MHz, but
5438          * in fact 1MHz is the correct frequency.
5439          */
5440         if (IS_VALLEYVIEW(dev)) {
5441                 /*
5442                  * Program the gmbus_freq based on the cdclk frequency.
5443                  * BSpec erroneously claims we should aim for 4MHz, but
5444                  * in fact 1MHz is the correct frequency.
5445                  */
5446                 I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
5447         }
5448
5449         if (dev_priv->max_cdclk_freq == 0)
5450                 intel_update_max_cdclk(dev);
5451 }
5452
5453 static void broxton_set_cdclk(struct drm_device *dev, int frequency)
5454 {
5455         struct drm_i915_private *dev_priv = dev->dev_private;
5456         uint32_t divider;
5457         uint32_t ratio;
5458         uint32_t current_freq;
5459         int ret;
5460
5461         /* frequency = 19.2MHz * ratio / 2 / div{1,1.5,2,4} */
5462         switch (frequency) {
5463         case 144000:
5464                 divider = BXT_CDCLK_CD2X_DIV_SEL_4;
5465                 ratio = BXT_DE_PLL_RATIO(60);
5466                 break;
5467         case 288000:
5468                 divider = BXT_CDCLK_CD2X_DIV_SEL_2;
5469                 ratio = BXT_DE_PLL_RATIO(60);
5470                 break;
5471         case 384000:
5472                 divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
5473                 ratio = BXT_DE_PLL_RATIO(60);
5474                 break;
5475         case 576000:
5476                 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
5477                 ratio = BXT_DE_PLL_RATIO(60);
5478                 break;
5479         case 624000:
5480                 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
5481                 ratio = BXT_DE_PLL_RATIO(65);
5482                 break;
5483         case 19200:
5484                 /*
5485                  * Bypass frequency with DE PLL disabled. Init ratio, divider
5486                  * to suppress GCC warning.
5487                  */
5488                 ratio = 0;
5489                 divider = 0;
5490                 break;
5491         default:
5492                 DRM_ERROR("unsupported CDCLK freq %d", frequency);
5493
5494                 return;
5495         }
5496
5497         mutex_lock(&dev_priv->rps.hw_lock);
5498         /* Inform power controller of upcoming frequency change */
5499         ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
5500                                       0x80000000);
5501         mutex_unlock(&dev_priv->rps.hw_lock);
5502
5503         if (ret) {
5504                 DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n",
5505                           ret, frequency);
5506                 return;
5507         }
5508
5509         current_freq = I915_READ(CDCLK_CTL) & CDCLK_FREQ_DECIMAL_MASK;
5510         /* convert from .1 fixpoint MHz with -1MHz offset to kHz */
5511         current_freq = current_freq * 500 + 1000;
5512
5513         /*
5514          * DE PLL has to be disabled when
5515          * - setting to 19.2MHz (bypass, PLL isn't used)
5516          * - before setting to 624MHz (PLL needs toggling)
5517          * - before setting to any frequency from 624MHz (PLL needs toggling)
5518          */
5519         if (frequency == 19200 || frequency == 624000 ||
5520             current_freq == 624000) {
5521                 I915_WRITE(BXT_DE_PLL_ENABLE, ~BXT_DE_PLL_PLL_ENABLE);
5522                 /* Timeout 200us */
5523                 if (wait_for(!(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK),
5524                              1))
5525                         DRM_ERROR("timout waiting for DE PLL unlock\n");
5526         }
5527
5528         if (frequency != 19200) {
5529                 uint32_t val;
5530
5531                 val = I915_READ(BXT_DE_PLL_CTL);
5532                 val &= ~BXT_DE_PLL_RATIO_MASK;
5533                 val |= ratio;
5534                 I915_WRITE(BXT_DE_PLL_CTL, val);
5535
5536                 I915_WRITE(BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE);
5537                 /* Timeout 200us */
5538                 if (wait_for(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK, 1))
5539                         DRM_ERROR("timeout waiting for DE PLL lock\n");
5540
5541                 val = I915_READ(CDCLK_CTL);
5542                 val &= ~BXT_CDCLK_CD2X_DIV_SEL_MASK;
5543                 val |= divider;
5544                 /*
5545                  * Disable SSA Precharge when CD clock frequency < 500 MHz,
5546                  * enable otherwise.
5547                  */
5548                 val &= ~BXT_CDCLK_SSA_PRECHARGE_ENABLE;
5549                 if (frequency >= 500000)
5550                         val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
5551
5552                 val &= ~CDCLK_FREQ_DECIMAL_MASK;
5553                 /* convert from kHz to .1 fixpoint MHz with -1MHz offset */
5554                 val |= (frequency - 1000) / 500;
5555                 I915_WRITE(CDCLK_CTL, val);
5556         }
5557
5558         mutex_lock(&dev_priv->rps.hw_lock);
5559         ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
5560                                       DIV_ROUND_UP(frequency, 25000));
5561         mutex_unlock(&dev_priv->rps.hw_lock);
5562
5563         if (ret) {
5564                 DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n",
5565                           ret, frequency);
5566                 return;
5567         }
5568
5569         intel_update_cdclk(dev);
5570 }
5571
5572 void broxton_init_cdclk(struct drm_device *dev)
5573 {
5574         struct drm_i915_private *dev_priv = dev->dev_private;
5575         uint32_t val;
5576
5577         /*
5578          * NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT
5579          * or else the reset will hang because there is no PCH to respond.
5580          * Move the handshake programming to initialization sequence.
5581          * Previously was left up to BIOS.
5582          */
5583         val = I915_READ(HSW_NDE_RSTWRN_OPT);
5584         val &= ~RESET_PCH_HANDSHAKE_ENABLE;
5585         I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
5586
5587         /* Enable PG1 for cdclk */
5588         intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
5589
5590         /* check if cd clock is enabled */
5591         if (I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_PLL_ENABLE) {
5592                 DRM_DEBUG_KMS("Display already initialized\n");
5593                 return;
5594         }
5595
5596         /*
5597          * FIXME:
5598          * - The initial CDCLK needs to be read from VBT.
5599          *   Need to make this change after VBT has changes for BXT.
5600          * - check if setting the max (or any) cdclk freq is really necessary
5601          *   here, it belongs to modeset time
5602          */
5603         broxton_set_cdclk(dev, 624000);
5604
5605         I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
5606         POSTING_READ(DBUF_CTL);
5607
5608         udelay(10);
5609
5610         if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
5611                 DRM_ERROR("DBuf power enable timeout!\n");
5612 }
5613
5614 void broxton_uninit_cdclk(struct drm_device *dev)
5615 {
5616         struct drm_i915_private *dev_priv = dev->dev_private;
5617
5618         I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
5619         POSTING_READ(DBUF_CTL);
5620
5621         udelay(10);
5622
5623         if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
5624                 DRM_ERROR("DBuf power disable timeout!\n");
5625
5626         /* Set minimum (bypass) frequency, in effect turning off the DE PLL */
5627         broxton_set_cdclk(dev, 19200);
5628
5629         intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
5630 }
5631
5632 static const struct skl_cdclk_entry {
5633         unsigned int freq;
5634         unsigned int vco;
5635 } skl_cdclk_frequencies[] = {
5636         { .freq = 308570, .vco = 8640 },
5637         { .freq = 337500, .vco = 8100 },
5638         { .freq = 432000, .vco = 8640 },
5639         { .freq = 450000, .vco = 8100 },
5640         { .freq = 540000, .vco = 8100 },
5641         { .freq = 617140, .vco = 8640 },
5642         { .freq = 675000, .vco = 8100 },
5643 };
5644
5645 static unsigned int skl_cdclk_decimal(unsigned int freq)
5646 {
5647         return (freq - 1000) / 500;
5648 }
5649
5650 static unsigned int skl_cdclk_get_vco(unsigned int freq)
5651 {
5652         unsigned int i;
5653
5654         for (i = 0; i < ARRAY_SIZE(skl_cdclk_frequencies); i++) {
5655                 const struct skl_cdclk_entry *e = &skl_cdclk_frequencies[i];
5656
5657                 if (e->freq == freq)
5658                         return e->vco;
5659         }
5660
5661         return 8100;
5662 }
5663
5664 static void
5665 skl_dpll0_enable(struct drm_i915_private *dev_priv, unsigned int required_vco)
5666 {
5667         unsigned int min_freq;
5668         u32 val;
5669
5670         /* select the minimum CDCLK before enabling DPLL 0 */
5671         val = I915_READ(CDCLK_CTL);
5672         val &= ~CDCLK_FREQ_SEL_MASK | ~CDCLK_FREQ_DECIMAL_MASK;
5673         val |= CDCLK_FREQ_337_308;
5674
5675         if (required_vco == 8640)
5676                 min_freq = 308570;
5677         else
5678                 min_freq = 337500;
5679
5680         val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_freq);
5681
5682         I915_WRITE(CDCLK_CTL, val);
5683         POSTING_READ(CDCLK_CTL);
5684
5685         /*
5686          * We always enable DPLL0 with the lowest link rate possible, but still
5687          * taking into account the VCO required to operate the eDP panel at the
5688          * desired frequency. The usual DP link rates operate with a VCO of
5689          * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
5690          * The modeset code is responsible for the selection of the exact link
5691          * rate later on, with the constraint of choosing a frequency that
5692          * works with required_vco.
5693          */
5694         val = I915_READ(DPLL_CTRL1);
5695
5696         val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
5697                  DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
5698         val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
5699         if (required_vco == 8640)
5700                 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
5701                                             SKL_DPLL0);
5702         else
5703                 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
5704                                             SKL_DPLL0);
5705
5706         I915_WRITE(DPLL_CTRL1, val);
5707         POSTING_READ(DPLL_CTRL1);
5708
5709         I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE);
5710
5711         if (wait_for(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK, 5))
5712                 DRM_ERROR("DPLL0 not locked\n");
5713 }
5714
5715 static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
5716 {
5717         int ret;
5718         u32 val;
5719
5720         /* inform PCU we want to change CDCLK */
5721         val = SKL_CDCLK_PREPARE_FOR_CHANGE;
5722         mutex_lock(&dev_priv->rps.hw_lock);
5723         ret = sandybridge_pcode_read(dev_priv, SKL_PCODE_CDCLK_CONTROL, &val);
5724         mutex_unlock(&dev_priv->rps.hw_lock);
5725
5726         return ret == 0 && (val & SKL_CDCLK_READY_FOR_CHANGE);
5727 }
5728
5729 static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv)
5730 {
5731         unsigned int i;
5732
5733         for (i = 0; i < 15; i++) {
5734                 if (skl_cdclk_pcu_ready(dev_priv))
5735                         return true;
5736                 udelay(10);
5737         }
5738
5739         return false;
5740 }
5741
5742 static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq)
5743 {
5744         struct drm_device *dev = dev_priv->dev;
5745         u32 freq_select, pcu_ack;
5746
5747         DRM_DEBUG_DRIVER("Changing CDCLK to %dKHz\n", freq);
5748
5749         if (!skl_cdclk_wait_for_pcu_ready(dev_priv)) {
5750                 DRM_ERROR("failed to inform PCU about cdclk change\n");
5751                 return;
5752         }
5753
5754         /* set CDCLK_CTL */
5755         switch(freq) {
5756         case 450000:
5757         case 432000:
5758                 freq_select = CDCLK_FREQ_450_432;
5759                 pcu_ack = 1;
5760                 break;
5761         case 540000:
5762                 freq_select = CDCLK_FREQ_540;
5763                 pcu_ack = 2;
5764                 break;
5765         case 308570:
5766         case 337500:
5767         default:
5768                 freq_select = CDCLK_FREQ_337_308;
5769                 pcu_ack = 0;
5770                 break;
5771         case 617140:
5772         case 675000:
5773                 freq_select = CDCLK_FREQ_675_617;
5774                 pcu_ack = 3;
5775                 break;
5776         }
5777
5778         I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(freq));
5779         POSTING_READ(CDCLK_CTL);
5780
5781         /* inform PCU of the change */
5782         mutex_lock(&dev_priv->rps.hw_lock);
5783         sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
5784         mutex_unlock(&dev_priv->rps.hw_lock);
5785
5786         intel_update_cdclk(dev);
5787 }
5788
5789 void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
5790 {
5791         /* disable DBUF power */
5792         I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
5793         POSTING_READ(DBUF_CTL);
5794
5795         udelay(10);
5796
5797         if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
5798                 DRM_ERROR("DBuf power disable timeout\n");
5799
5800         /*
5801          * DMC assumes ownership of LCPLL and will get confused if we touch it.
5802          */
5803         if (dev_priv->csr.dmc_payload) {
5804                 /* disable DPLL0 */
5805                 I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) &
5806                                         ~LCPLL_PLL_ENABLE);
5807                 if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
5808                         DRM_ERROR("Couldn't disable DPLL0\n");
5809         }
5810
5811         intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
5812 }
5813
5814 void skl_init_cdclk(struct drm_i915_private *dev_priv)
5815 {
5816         u32 val;
5817         unsigned int required_vco;
5818
5819         /* enable PCH reset handshake */
5820         val = I915_READ(HSW_NDE_RSTWRN_OPT);
5821         I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE);
5822
5823         /* enable PG1 and Misc I/O */
5824         intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
5825
5826         /* DPLL0 not enabled (happens on early BIOS versions) */
5827         if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE)) {
5828                 /* enable DPLL0 */
5829                 required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk);
5830                 skl_dpll0_enable(dev_priv, required_vco);
5831         }
5832
5833         /* set CDCLK to the frequency the BIOS chose */
5834         skl_set_cdclk(dev_priv, dev_priv->skl_boot_cdclk);
5835
5836         /* enable DBUF power */
5837         I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
5838         POSTING_READ(DBUF_CTL);
5839
5840         udelay(10);
5841
5842         if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
5843                 DRM_ERROR("DBuf power enable timeout\n");
5844 }
5845
5846 /* Adjust CDclk dividers to allow high res or save power if possible */
5847 static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
5848 {
5849         struct drm_i915_private *dev_priv = dev->dev_private;
5850         u32 val, cmd;
5851
5852         WARN_ON(dev_priv->display.get_display_clock_speed(dev)
5853                                         != dev_priv->cdclk_freq);
5854
5855         if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
5856                 cmd = 2;
5857         else if (cdclk == 266667)
5858                 cmd = 1;
5859         else
5860                 cmd = 0;
5861
5862         mutex_lock(&dev_priv->rps.hw_lock);
5863         val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
5864         val &= ~DSPFREQGUAR_MASK;
5865         val |= (cmd << DSPFREQGUAR_SHIFT);
5866         vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
5867         if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
5868                       DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
5869                      50)) {
5870                 DRM_ERROR("timed out waiting for CDclk change\n");
5871         }
5872         mutex_unlock(&dev_priv->rps.hw_lock);
5873
5874         mutex_lock(&dev_priv->sb_lock);
5875
5876         if (cdclk == 400000) {
5877                 u32 divider;
5878
5879                 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
5880
5881                 /* adjust cdclk divider */
5882                 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
5883                 val &= ~CCK_FREQUENCY_VALUES;
5884                 val |= divider;
5885                 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
5886
5887                 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
5888                               CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT),
5889                              50))
5890                         DRM_ERROR("timed out waiting for CDclk change\n");
5891         }
5892
5893         /* adjust self-refresh exit latency value */
5894         val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
5895         val &= ~0x7f;
5896
5897         /*
5898          * For high bandwidth configs, we set a higher latency in the bunit
5899          * so that the core display fetch happens in time to avoid underruns.
5900          */
5901         if (cdclk == 400000)
5902                 val |= 4500 / 250; /* 4.5 usec */
5903         else
5904                 val |= 3000 / 250; /* 3.0 usec */
5905         vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
5906
5907         mutex_unlock(&dev_priv->sb_lock);
5908
5909         intel_update_cdclk(dev);
5910 }
5911
5912 static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
5913 {
5914         struct drm_i915_private *dev_priv = dev->dev_private;
5915         u32 val, cmd;
5916
5917         WARN_ON(dev_priv->display.get_display_clock_speed(dev)
5918                                                 != dev_priv->cdclk_freq);
5919
5920         switch (cdclk) {
5921         case 333333:
5922         case 320000:
5923         case 266667:
5924         case 200000:
5925                 break;
5926         default:
5927                 MISSING_CASE(cdclk);
5928                 return;
5929         }
5930
5931         /*
5932          * Specs are full of misinformation, but testing on actual
5933          * hardware has shown that we just need to write the desired
5934          * CCK divider into the Punit register.
5935          */
5936         cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
5937
5938         mutex_lock(&dev_priv->rps.hw_lock);
5939         val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
5940         val &= ~DSPFREQGUAR_MASK_CHV;
5941         val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
5942         vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
5943         if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
5944                       DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
5945                      50)) {
5946                 DRM_ERROR("timed out waiting for CDclk change\n");
5947         }
5948         mutex_unlock(&dev_priv->rps.hw_lock);
5949
5950         intel_update_cdclk(dev);
5951 }
5952
5953 static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
5954                                  int max_pixclk)
5955 {
5956         int freq_320 = (dev_priv->hpll_freq <<  1) % 320000 != 0 ? 333333 : 320000;
5957         int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90;
5958
5959         /*
5960          * Really only a few cases to deal with, as only 4 CDclks are supported:
5961          *   200MHz
5962          *   267MHz
5963          *   320/333MHz (depends on HPLL freq)
5964          *   400MHz (VLV only)
5965          * So we check to see whether we're above 90% (VLV) or 95% (CHV)
5966          * of the lower bin and adjust if needed.
5967          *
5968          * We seem to get an unstable or solid color picture at 200MHz.
5969          * Not sure what's wrong. For now use 200MHz only when all pipes
5970          * are off.
5971          */
5972         if (!IS_CHERRYVIEW(dev_priv) &&
5973             max_pixclk > freq_320*limit/100)
5974                 return 400000;
5975         else if (max_pixclk > 266667*limit/100)
5976                 return freq_320;
5977         else if (max_pixclk > 0)
5978                 return 266667;
5979         else
5980                 return 200000;
5981 }
5982
5983 static int broxton_calc_cdclk(struct drm_i915_private *dev_priv,
5984                               int max_pixclk)
5985 {
5986         /*
5987          * FIXME:
5988          * - remove the guardband, it's not needed on BXT
5989          * - set 19.2MHz bypass frequency if there are no active pipes
5990          */
5991         if (max_pixclk > 576000*9/10)
5992                 return 624000;
5993         else if (max_pixclk > 384000*9/10)
5994                 return 576000;
5995         else if (max_pixclk > 288000*9/10)
5996                 return 384000;
5997         else if (max_pixclk > 144000*9/10)
5998                 return 288000;
5999         else
6000                 return 144000;
6001 }
6002
6003 /* Compute the max pixel clock for new configuration. Uses atomic state if
6004  * that's non-NULL, look at current state otherwise. */
6005 static int intel_mode_max_pixclk(struct drm_device *dev,
6006                                  struct drm_atomic_state *state)
6007 {
6008         struct intel_crtc *intel_crtc;
6009         struct intel_crtc_state *crtc_state;
6010         int max_pixclk = 0;
6011
6012         for_each_intel_crtc(dev, intel_crtc) {
6013                 crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
6014                 if (IS_ERR(crtc_state))
6015                         return PTR_ERR(crtc_state);
6016
6017                 if (!crtc_state->base.enable)
6018                         continue;
6019
6020                 max_pixclk = max(max_pixclk,
6021                                  crtc_state->base.adjusted_mode.crtc_clock);
6022         }
6023
6024         return max_pixclk;
6025 }
6026
6027 static int valleyview_modeset_calc_cdclk(struct drm_atomic_state *state)
6028 {
6029         struct drm_device *dev = state->dev;
6030         struct drm_i915_private *dev_priv = dev->dev_private;
6031         int max_pixclk = intel_mode_max_pixclk(dev, state);
6032
6033         if (max_pixclk < 0)
6034                 return max_pixclk;
6035
6036         to_intel_atomic_state(state)->cdclk =
6037                 valleyview_calc_cdclk(dev_priv, max_pixclk);
6038
6039         return 0;
6040 }
6041
6042 static int broxton_modeset_calc_cdclk(struct drm_atomic_state *state)
6043 {
6044         struct drm_device *dev = state->dev;
6045         struct drm_i915_private *dev_priv = dev->dev_private;
6046         int max_pixclk = intel_mode_max_pixclk(dev, state);
6047
6048         if (max_pixclk < 0)
6049                 return max_pixclk;
6050
6051         to_intel_atomic_state(state)->cdclk =
6052                 broxton_calc_cdclk(dev_priv, max_pixclk);
6053
6054         return 0;
6055 }
6056
6057 static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
6058 {
6059         unsigned int credits, default_credits;
6060
6061         if (IS_CHERRYVIEW(dev_priv))
6062                 default_credits = PFI_CREDIT(12);
6063         else
6064                 default_credits = PFI_CREDIT(8);
6065
6066         if (dev_priv->cdclk_freq >= dev_priv->czclk_freq) {
6067                 /* CHV suggested value is 31 or 63 */
6068                 if (IS_CHERRYVIEW(dev_priv))
6069                         credits = PFI_CREDIT_63;
6070                 else
6071                         credits = PFI_CREDIT(15);
6072         } else {
6073                 credits = default_credits;
6074         }
6075
6076         /*
6077          * WA - write default credits before re-programming
6078          * FIXME: should we also set the resend bit here?
6079          */
6080         I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
6081                    default_credits);
6082
6083         I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE |
6084                    credits | PFI_CREDIT_RESEND);
6085
6086         /*
6087          * FIXME is this guaranteed to clear
6088          * immediately or should we poll for it?
6089          */
6090         WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND);
6091 }
6092
6093 static void valleyview_modeset_commit_cdclk(struct drm_atomic_state *old_state)
6094 {
6095         struct drm_device *dev = old_state->dev;
6096         unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
6097         struct drm_i915_private *dev_priv = dev->dev_private;
6098
6099         /*
6100          * FIXME: We can end up here with all power domains off, yet
6101          * with a CDCLK frequency other than the minimum. To account
6102          * for this take the PIPE-A power domain, which covers the HW
6103          * blocks needed for the following programming. This can be
6104          * removed once it's guaranteed that we get here either with
6105          * the minimum CDCLK set, or the required power domains
6106          * enabled.
6107          */
6108         intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
6109
6110         if (IS_CHERRYVIEW(dev))
6111                 cherryview_set_cdclk(dev, req_cdclk);
6112         else
6113                 valleyview_set_cdclk(dev, req_cdclk);
6114
6115         vlv_program_pfi_credits(dev_priv);
6116
6117         intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
6118 }
6119
6120 static void valleyview_crtc_enable(struct drm_crtc *crtc)
6121 {
6122         struct drm_device *dev = crtc->dev;
6123         struct drm_i915_private *dev_priv = to_i915(dev);
6124         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6125         struct intel_encoder *encoder;
6126         int pipe = intel_crtc->pipe;
6127         bool is_dsi;
6128
6129         if (WARN_ON(intel_crtc->active))
6130                 return;
6131
6132         is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
6133
6134         if (intel_crtc->config->has_dp_encoder)
6135                 intel_dp_set_m_n(intel_crtc, M1_N1);
6136
6137         intel_set_pipe_timings(intel_crtc);
6138
6139         if (IS_CHERRYVIEW(dev) && pipe == PIPE_B) {
6140                 struct drm_i915_private *dev_priv = dev->dev_private;
6141
6142                 I915_WRITE(CHV_BLEND(pipe), CHV_BLEND_LEGACY);
6143                 I915_WRITE(CHV_CANVAS(pipe), 0);
6144         }
6145
6146         i9xx_set_pipeconf(intel_crtc);
6147
6148         intel_crtc->active = true;
6149
6150         intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
6151
6152         for_each_encoder_on_crtc(dev, crtc, encoder)
6153                 if (encoder->pre_pll_enable)
6154                         encoder->pre_pll_enable(encoder);
6155
6156         if (!is_dsi) {
6157                 if (IS_CHERRYVIEW(dev)) {
6158                         chv_prepare_pll(intel_crtc, intel_crtc->config);
6159                         chv_enable_pll(intel_crtc, intel_crtc->config);
6160                 } else {
6161                         vlv_prepare_pll(intel_crtc, intel_crtc->config);
6162                         vlv_enable_pll(intel_crtc, intel_crtc->config);
6163                 }
6164         }
6165
6166         for_each_encoder_on_crtc(dev, crtc, encoder)
6167                 if (encoder->pre_enable)
6168                         encoder->pre_enable(encoder);
6169
6170         i9xx_pfit_enable(intel_crtc);
6171
6172         intel_crtc_load_lut(crtc);
6173
6174         intel_enable_pipe(intel_crtc);
6175
6176         assert_vblank_disabled(crtc);
6177         drm_crtc_vblank_on(crtc);
6178
6179         for_each_encoder_on_crtc(dev, crtc, encoder)
6180                 encoder->enable(encoder);
6181 }
6182
6183 static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
6184 {
6185         struct drm_device *dev = crtc->base.dev;
6186         struct drm_i915_private *dev_priv = dev->dev_private;
6187
6188         I915_WRITE(FP0(crtc->pipe), crtc->config->dpll_hw_state.fp0);
6189         I915_WRITE(FP1(crtc->pipe), crtc->config->dpll_hw_state.fp1);
6190 }
6191
6192 static void i9xx_crtc_enable(struct drm_crtc *crtc)
6193 {
6194         struct drm_device *dev = crtc->dev;
6195         struct drm_i915_private *dev_priv = to_i915(dev);
6196         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6197         struct intel_encoder *encoder;
6198         int pipe = intel_crtc->pipe;
6199
6200         if (WARN_ON(intel_crtc->active))
6201                 return;
6202
6203         i9xx_set_pll_dividers(intel_crtc);
6204
6205         if (intel_crtc->config->has_dp_encoder)
6206                 intel_dp_set_m_n(intel_crtc, M1_N1);
6207
6208         intel_set_pipe_timings(intel_crtc);
6209
6210         i9xx_set_pipeconf(intel_crtc);
6211
6212         intel_crtc->active = true;
6213
6214         if (!IS_GEN2(dev))
6215                 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
6216
6217         for_each_encoder_on_crtc(dev, crtc, encoder)
6218                 if (encoder->pre_enable)
6219                         encoder->pre_enable(encoder);
6220
6221         i9xx_enable_pll(intel_crtc);
6222
6223         i9xx_pfit_enable(intel_crtc);
6224
6225         intel_crtc_load_lut(crtc);
6226
6227         intel_update_watermarks(crtc);
6228         intel_enable_pipe(intel_crtc);
6229
6230         assert_vblank_disabled(crtc);
6231         drm_crtc_vblank_on(crtc);
6232
6233         for_each_encoder_on_crtc(dev, crtc, encoder)
6234                 encoder->enable(encoder);
6235 }
6236
6237 static void i9xx_pfit_disable(struct intel_crtc *crtc)
6238 {
6239         struct drm_device *dev = crtc->base.dev;
6240         struct drm_i915_private *dev_priv = dev->dev_private;
6241
6242         if (!crtc->config->gmch_pfit.control)
6243                 return;
6244
6245         assert_pipe_disabled(dev_priv, crtc->pipe);
6246
6247         DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n",
6248                          I915_READ(PFIT_CONTROL));
6249         I915_WRITE(PFIT_CONTROL, 0);
6250 }
6251
6252 static void i9xx_crtc_disable(struct drm_crtc *crtc)
6253 {
6254         struct drm_device *dev = crtc->dev;
6255         struct drm_i915_private *dev_priv = dev->dev_private;
6256         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6257         struct intel_encoder *encoder;
6258         int pipe = intel_crtc->pipe;
6259
6260         /*
6261          * On gen2 planes are double buffered but the pipe isn't, so we must
6262          * wait for planes to fully turn off before disabling the pipe.
6263          * We also need to wait on all gmch platforms because of the
6264          * self-refresh mode constraint explained above.
6265          */
6266         intel_wait_for_vblank(dev, pipe);
6267
6268         for_each_encoder_on_crtc(dev, crtc, encoder)
6269                 encoder->disable(encoder);
6270
6271         drm_crtc_vblank_off(crtc);
6272         assert_vblank_disabled(crtc);
6273
6274         intel_disable_pipe(intel_crtc);
6275
6276         i9xx_pfit_disable(intel_crtc);
6277
6278         for_each_encoder_on_crtc(dev, crtc, encoder)
6279                 if (encoder->post_disable)
6280                         encoder->post_disable(encoder);
6281
6282         if (!intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI)) {
6283                 if (IS_CHERRYVIEW(dev))
6284                         chv_disable_pll(dev_priv, pipe);
6285                 else if (IS_VALLEYVIEW(dev))
6286                         vlv_disable_pll(dev_priv, pipe);
6287                 else
6288                         i9xx_disable_pll(intel_crtc);
6289         }
6290
6291         for_each_encoder_on_crtc(dev, crtc, encoder)
6292                 if (encoder->post_pll_disable)
6293                         encoder->post_pll_disable(encoder);
6294
6295         if (!IS_GEN2(dev))
6296                 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
6297 }
6298
6299 static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
6300 {
6301         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6302         struct drm_i915_private *dev_priv = to_i915(crtc->dev);
6303         enum intel_display_power_domain domain;
6304         unsigned long domains;
6305
6306         if (!intel_crtc->active)
6307                 return;
6308
6309         if (to_intel_plane_state(crtc->primary->state)->visible) {
6310                 intel_crtc_wait_for_pending_flips(crtc);
6311                 intel_pre_disable_primary(crtc);
6312         }
6313
6314         intel_crtc_disable_planes(crtc, crtc->state->plane_mask);
6315         dev_priv->display.crtc_disable(crtc);
6316         intel_crtc->active = false;
6317         intel_update_watermarks(crtc);
6318         intel_disable_shared_dpll(intel_crtc);
6319
6320         domains = intel_crtc->enabled_power_domains;
6321         for_each_power_domain(domain, domains)
6322                 intel_display_power_put(dev_priv, domain);
6323         intel_crtc->enabled_power_domains = 0;
6324 }
6325
6326 /*
6327  * turn all crtc's off, but do not adjust state
6328  * This has to be paired with a call to intel_modeset_setup_hw_state.
6329  */
6330 int intel_display_suspend(struct drm_device *dev)
6331 {
6332         struct drm_mode_config *config = &dev->mode_config;
6333         struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx;
6334         struct drm_atomic_state *state;
6335         struct drm_crtc *crtc;
6336         unsigned crtc_mask = 0;
6337         int ret = 0;
6338
6339         if (WARN_ON(!ctx))
6340                 return 0;
6341
6342         lockdep_assert_held(&ctx->ww_ctx);
6343         state = drm_atomic_state_alloc(dev);
6344         if (WARN_ON(!state))
6345                 return -ENOMEM;
6346
6347         state->acquire_ctx = ctx;
6348         state->allow_modeset = true;
6349
6350         for_each_crtc(dev, crtc) {
6351                 struct drm_crtc_state *crtc_state =
6352                         drm_atomic_get_crtc_state(state, crtc);
6353
6354                 ret = PTR_ERR_OR_ZERO(crtc_state);
6355                 if (ret)
6356                         goto free;
6357
6358                 if (!crtc_state->active)
6359                         continue;
6360
6361                 crtc_state->active = false;
6362                 crtc_mask |= 1 << drm_crtc_index(crtc);
6363         }
6364
6365         if (crtc_mask) {
6366                 ret = drm_atomic_commit(state);
6367
6368                 if (!ret) {
6369                         for_each_crtc(dev, crtc)
6370                                 if (crtc_mask & (1 << drm_crtc_index(crtc)))
6371                                         crtc->state->active = true;
6372
6373                         return ret;
6374                 }
6375         }
6376
6377 free:
6378         if (ret)
6379                 DRM_ERROR("Suspending crtc's failed with %i\n", ret);
6380         drm_atomic_state_free(state);
6381         return ret;
6382 }
6383
6384 void intel_encoder_destroy(struct drm_encoder *encoder)
6385 {
6386         struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
6387
6388         drm_encoder_cleanup(encoder);
6389         kfree(intel_encoder);
6390 }
6391
6392 /* Cross check the actual hw state with our own modeset state tracking (and it's
6393  * internal consistency). */
6394 static void intel_connector_check_state(struct intel_connector *connector)
6395 {
6396         struct drm_crtc *crtc = connector->base.state->crtc;
6397
6398         DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
6399                       connector->base.base.id,
6400                       connector->base.name);
6401
6402         if (connector->get_hw_state(connector)) {
6403                 struct intel_encoder *encoder = connector->encoder;
6404                 struct drm_connector_state *conn_state = connector->base.state;
6405
6406                 I915_STATE_WARN(!crtc,
6407                          "connector enabled without attached crtc\n");
6408
6409                 if (!crtc)
6410                         return;
6411
6412                 I915_STATE_WARN(!crtc->state->active,
6413                       "connector is active, but attached crtc isn't\n");
6414
6415                 if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST)
6416                         return;
6417
6418                 I915_STATE_WARN(conn_state->best_encoder != &encoder->base,
6419                         "atomic encoder doesn't match attached encoder\n");
6420
6421                 I915_STATE_WARN(conn_state->crtc != encoder->base.crtc,
6422                         "attached encoder crtc differs from connector crtc\n");
6423         } else {
6424                 I915_STATE_WARN(crtc && crtc->state->active,
6425                         "attached crtc is active, but connector isn't\n");
6426                 I915_STATE_WARN(!crtc && connector->base.state->best_encoder,
6427                         "best encoder set without crtc!\n");
6428         }
6429 }
6430
6431 int intel_connector_init(struct intel_connector *connector)
6432 {
6433         struct drm_connector_state *connector_state;
6434
6435         connector_state = kzalloc(sizeof *connector_state, GFP_KERNEL);
6436         if (!connector_state)
6437                 return -ENOMEM;
6438
6439         connector->base.state = connector_state;
6440         return 0;
6441 }
6442
6443 struct intel_connector *intel_connector_alloc(void)
6444 {
6445         struct intel_connector *connector;
6446
6447         connector = kzalloc(sizeof *connector, GFP_KERNEL);
6448         if (!connector)
6449                 return NULL;
6450
6451         if (intel_connector_init(connector) < 0) {
6452                 kfree(connector);
6453                 return NULL;
6454         }
6455
6456         return connector;
6457 }
6458
6459 /* Simple connector->get_hw_state implementation for encoders that support only
6460  * one connector and no cloning and hence the encoder state determines the state
6461  * of the connector. */
6462 bool intel_connector_get_hw_state(struct intel_connector *connector)
6463 {
6464         enum pipe pipe = 0;
6465         struct intel_encoder *encoder = connector->encoder;
6466
6467         return encoder->get_hw_state(encoder, &pipe);
6468 }
6469
6470 static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
6471 {
6472         if (crtc_state->base.enable && crtc_state->has_pch_encoder)
6473                 return crtc_state->fdi_lanes;
6474
6475         return 0;
6476 }
6477
6478 static int ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
6479                                      struct intel_crtc_state *pipe_config)
6480 {
6481         struct drm_atomic_state *state = pipe_config->base.state;
6482         struct intel_crtc *other_crtc;
6483         struct intel_crtc_state *other_crtc_state;
6484
6485         DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
6486                       pipe_name(pipe), pipe_config->fdi_lanes);
6487         if (pipe_config->fdi_lanes > 4) {
6488                 DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
6489                               pipe_name(pipe), pipe_config->fdi_lanes);
6490                 return -EINVAL;
6491         }
6492
6493         if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
6494                 if (pipe_config->fdi_lanes > 2) {
6495                         DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
6496                                       pipe_config->fdi_lanes);
6497                         return -EINVAL;
6498                 } else {
6499                         return 0;
6500                 }
6501         }
6502
6503         if (INTEL_INFO(dev)->num_pipes == 2)
6504                 return 0;
6505
6506         /* Ivybridge 3 pipe is really complicated */
6507         switch (pipe) {
6508         case PIPE_A:
6509                 return 0;
6510         case PIPE_B:
6511                 if (pipe_config->fdi_lanes <= 2)
6512                         return 0;
6513
6514                 other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_C));
6515                 other_crtc_state =
6516                         intel_atomic_get_crtc_state(state, other_crtc);
6517                 if (IS_ERR(other_crtc_state))
6518                         return PTR_ERR(other_crtc_state);
6519
6520                 if (pipe_required_fdi_lanes(other_crtc_state) > 0) {
6521                         DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
6522                                       pipe_name(pipe), pipe_config->fdi_lanes);
6523                         return -EINVAL;
6524                 }
6525                 return 0;
6526         case PIPE_C:
6527                 if (pipe_config->fdi_lanes > 2) {
6528                         DRM_DEBUG_KMS("only 2 lanes on pipe %c: required %i lanes\n",
6529                                       pipe_name(pipe), pipe_config->fdi_lanes);
6530                         return -EINVAL;
6531                 }
6532
6533                 other_crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, PIPE_B));
6534                 other_crtc_state =
6535                         intel_atomic_get_crtc_state(state, other_crtc);
6536                 if (IS_ERR(other_crtc_state))
6537                         return PTR_ERR(other_crtc_state);
6538
6539                 if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
6540                         DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
6541                         return -EINVAL;
6542                 }
6543                 return 0;
6544         default:
6545                 BUG();
6546         }
6547 }
6548
6549 #define RETRY 1
6550 static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
6551                                        struct intel_crtc_state *pipe_config)
6552 {
6553         struct drm_device *dev = intel_crtc->base.dev;
6554         const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
6555         int lane, link_bw, fdi_dotclock, ret;
6556         bool needs_recompute = false;
6557
6558 retry:
6559         /* FDI is a binary signal running at ~2.7GHz, encoding
6560          * each output octet as 10 bits. The actual frequency
6561          * is stored as a divider into a 100MHz clock, and the
6562          * mode pixel clock is stored in units of 1KHz.
6563          * Hence the bw of each lane in terms of the mode signal
6564          * is:
6565          */
6566         link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
6567
6568         fdi_dotclock = adjusted_mode->crtc_clock;
6569
6570         lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
6571                                            pipe_config->pipe_bpp);
6572
6573         pipe_config->fdi_lanes = lane;
6574
6575         intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
6576                                link_bw, &pipe_config->fdi_m_n);
6577
6578         ret = ironlake_check_fdi_lanes(intel_crtc->base.dev,
6579                                        intel_crtc->pipe, pipe_config);
6580         if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
6581                 pipe_config->pipe_bpp -= 2*3;
6582                 DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
6583                               pipe_config->pipe_bpp);
6584                 needs_recompute = true;
6585                 pipe_config->bw_constrained = true;
6586
6587                 goto retry;
6588         }
6589
6590         if (needs_recompute)
6591                 return RETRY;
6592
6593         return ret;
6594 }
6595
6596 static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
6597                                      struct intel_crtc_state *pipe_config)
6598 {
6599         if (pipe_config->pipe_bpp > 24)
6600                 return false;
6601
6602         /* HSW can handle pixel rate up to cdclk? */
6603         if (IS_HASWELL(dev_priv->dev))
6604                 return true;
6605
6606         /*
6607          * We compare against max which means we must take
6608          * the increased cdclk requirement into account when
6609          * calculating the new cdclk.
6610          *
6611          * Should measure whether using a lower cdclk w/o IPS
6612          */
6613         return ilk_pipe_pixel_rate(pipe_config) <=
6614                 dev_priv->max_cdclk_freq * 95 / 100;
6615 }
6616
6617 static void hsw_compute_ips_config(struct intel_crtc *crtc,
6618                                    struct intel_crtc_state *pipe_config)
6619 {
6620         struct drm_device *dev = crtc->base.dev;
6621         struct drm_i915_private *dev_priv = dev->dev_private;
6622
6623         pipe_config->ips_enabled = i915.enable_ips &&
6624                 hsw_crtc_supports_ips(crtc) &&
6625                 pipe_config_supports_ips(dev_priv, pipe_config);
6626 }
6627
6628 static int intel_crtc_compute_config(struct intel_crtc *crtc,
6629                                      struct intel_crtc_state *pipe_config)
6630 {
6631         struct drm_device *dev = crtc->base.dev;
6632         struct drm_i915_private *dev_priv = dev->dev_private;
6633         const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
6634
6635         /* FIXME should check pixel clock limits on all platforms */
6636         if (INTEL_INFO(dev)->gen < 4) {
6637                 int clock_limit = dev_priv->max_cdclk_freq;
6638
6639                 /*
6640                  * Enable pixel doubling when the dot clock
6641                  * is > 90% of the (display) core speed.
6642                  *
6643                  * GDG double wide on either pipe,
6644                  * otherwise pipe A only.
6645                  */
6646                 if ((crtc->pipe == PIPE_A || IS_I915G(dev)) &&
6647                     adjusted_mode->crtc_clock > clock_limit * 9 / 10) {
6648                         clock_limit *= 2;
6649                         pipe_config->double_wide = true;
6650                 }
6651
6652                 if (adjusted_mode->crtc_clock > clock_limit * 9 / 10)
6653                         return -EINVAL;
6654         }
6655
6656         /*
6657          * Pipe horizontal size must be even in:
6658          * - DVO ganged mode
6659          * - LVDS dual channel mode
6660          * - Double wide pipe
6661          */
6662         if ((intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_LVDS) &&
6663              intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
6664                 pipe_config->pipe_src_w &= ~1;
6665
6666         /* Cantiga+ cannot handle modes with a hsync front porch of 0.
6667          * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
6668          */
6669         if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
6670                 adjusted_mode->crtc_hsync_start == adjusted_mode->crtc_hdisplay)
6671                 return -EINVAL;
6672
6673         if (HAS_IPS(dev))
6674                 hsw_compute_ips_config(crtc, pipe_config);
6675
6676         if (pipe_config->has_pch_encoder)
6677                 return ironlake_fdi_compute_config(crtc, pipe_config);
6678
6679         return 0;
6680 }
6681
6682 static int skylake_get_display_clock_speed(struct drm_device *dev)
6683 {
6684         struct drm_i915_private *dev_priv = to_i915(dev);
6685         uint32_t lcpll1 = I915_READ(LCPLL1_CTL);
6686         uint32_t cdctl = I915_READ(CDCLK_CTL);
6687         uint32_t linkrate;
6688
6689         if (!(lcpll1 & LCPLL_PLL_ENABLE))
6690                 return 24000; /* 24MHz is the cd freq with NSSC ref */
6691
6692         if ((cdctl & CDCLK_FREQ_SEL_MASK) == CDCLK_FREQ_540)
6693                 return 540000;
6694
6695         linkrate = (I915_READ(DPLL_CTRL1) &
6696                     DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) >> 1;
6697
6698         if (linkrate == DPLL_CTRL1_LINK_RATE_2160 ||
6699             linkrate == DPLL_CTRL1_LINK_RATE_1080) {
6700                 /* vco 8640 */
6701                 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
6702                 case CDCLK_FREQ_450_432:
6703                         return 432000;
6704                 case CDCLK_FREQ_337_308:
6705                         return 308570;
6706                 case CDCLK_FREQ_675_617:
6707                         return 617140;
6708                 default:
6709                         WARN(1, "Unknown cd freq selection\n");
6710                 }
6711         } else {
6712                 /* vco 8100 */
6713                 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
6714                 case CDCLK_FREQ_450_432:
6715                         return 450000;
6716                 case CDCLK_FREQ_337_308:
6717                         return 337500;
6718                 case CDCLK_FREQ_675_617:
6719                         return 675000;
6720                 default:
6721                         WARN(1, "Unknown cd freq selection\n");
6722                 }
6723         }
6724
6725         /* error case, do as if DPLL0 isn't enabled */
6726         return 24000;
6727 }
6728
6729 static int broxton_get_display_clock_speed(struct drm_device *dev)
6730 {
6731         struct drm_i915_private *dev_priv = to_i915(dev);
6732         uint32_t cdctl = I915_READ(CDCLK_CTL);
6733         uint32_t pll_ratio = I915_READ(BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
6734         uint32_t pll_enab = I915_READ(BXT_DE_PLL_ENABLE);
6735         int cdclk;
6736
6737         if (!(pll_enab & BXT_DE_PLL_PLL_ENABLE))
6738                 return 19200;
6739
6740         cdclk = 19200 * pll_ratio / 2;
6741
6742         switch (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) {
6743         case BXT_CDCLK_CD2X_DIV_SEL_1:
6744                 return cdclk;  /* 576MHz or 624MHz */
6745         case BXT_CDCLK_CD2X_DIV_SEL_1_5:
6746                 return cdclk * 2 / 3; /* 384MHz */
6747         case BXT_CDCLK_CD2X_DIV_SEL_2:
6748                 return cdclk / 2; /* 288MHz */
6749         case BXT_CDCLK_CD2X_DIV_SEL_4:
6750                 return cdclk / 4; /* 144MHz */
6751         }
6752
6753         /* error case, do as if DE PLL isn't enabled */
6754         return 19200;
6755 }
6756
6757 static int broadwell_get_display_clock_speed(struct drm_device *dev)
6758 {
6759         struct drm_i915_private *dev_priv = dev->dev_private;
6760         uint32_t lcpll = I915_READ(LCPLL_CTL);
6761         uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
6762
6763         if (lcpll & LCPLL_CD_SOURCE_FCLK)
6764                 return 800000;
6765         else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
6766                 return 450000;
6767         else if (freq == LCPLL_CLK_FREQ_450)
6768                 return 450000;
6769         else if (freq == LCPLL_CLK_FREQ_54O_BDW)
6770                 return 540000;
6771         else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
6772                 return 337500;
6773         else
6774                 return 675000;
6775 }
6776
6777 static int haswell_get_display_clock_speed(struct drm_device *dev)
6778 {
6779         struct drm_i915_private *dev_priv = dev->dev_private;
6780         uint32_t lcpll = I915_READ(LCPLL_CTL);
6781         uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
6782
6783         if (lcpll & LCPLL_CD_SOURCE_FCLK)
6784                 return 800000;
6785         else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
6786                 return 450000;
6787         else if (freq == LCPLL_CLK_FREQ_450)
6788                 return 450000;
6789         else if (IS_HSW_ULT(dev))
6790                 return 337500;
6791         else
6792                 return 540000;
6793 }
6794
6795 static int valleyview_get_display_clock_speed(struct drm_device *dev)
6796 {
6797         return vlv_get_cck_clock_hpll(to_i915(dev), "cdclk",
6798                                       CCK_DISPLAY_CLOCK_CONTROL);
6799 }
6800
6801 static int ilk_get_display_clock_speed(struct drm_device *dev)
6802 {
6803         return 450000;
6804 }
6805
6806 static int i945_get_display_clock_speed(struct drm_device *dev)
6807 {
6808         return 400000;
6809 }
6810
6811 static int i915_get_display_clock_speed(struct drm_device *dev)
6812 {
6813         return 333333;
6814 }
6815
6816 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
6817 {
6818         return 200000;
6819 }
6820
6821 static int pnv_get_display_clock_speed(struct drm_device *dev)
6822 {
6823         u16 gcfgc = 0;
6824
6825         pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
6826
6827         switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
6828         case GC_DISPLAY_CLOCK_267_MHZ_PNV:
6829                 return 266667;
6830         case GC_DISPLAY_CLOCK_333_MHZ_PNV:
6831                 return 333333;
6832         case GC_DISPLAY_CLOCK_444_MHZ_PNV:
6833                 return 444444;
6834         case GC_DISPLAY_CLOCK_200_MHZ_PNV:
6835                 return 200000;
6836         default:
6837                 DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc);
6838         case GC_DISPLAY_CLOCK_133_MHZ_PNV:
6839                 return 133333;
6840         case GC_DISPLAY_CLOCK_167_MHZ_PNV:
6841                 return 166667;
6842         }
6843 }
6844
6845 static int i915gm_get_display_clock_speed(struct drm_device *dev)
6846 {
6847         u16 gcfgc = 0;
6848
6849         pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
6850
6851         if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
6852                 return 133333;
6853         else {
6854                 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
6855                 case GC_DISPLAY_CLOCK_333_MHZ:
6856                         return 333333;
6857                 default:
6858                 case GC_DISPLAY_CLOCK_190_200_MHZ:
6859                         return 190000;
6860                 }
6861         }
6862 }
6863
6864 static int i865_get_display_clock_speed(struct drm_device *dev)
6865 {
6866         return 266667;
6867 }
6868
6869 static int i85x_get_display_clock_speed(struct drm_device *dev)
6870 {
6871         u16 hpllcc = 0;
6872
6873         /*
6874          * 852GM/852GMV only supports 133 MHz and the HPLLCC
6875          * encoding is different :(
6876          * FIXME is this the right way to detect 852GM/852GMV?
6877          */
6878         if (dev->pdev->revision == 0x1)
6879                 return 133333;
6880
6881         pci_bus_read_config_word(dev->pdev->bus,
6882                                  PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
6883
6884         /* Assume that the hardware is in the high speed state.  This
6885          * should be the default.
6886          */
6887         switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
6888         case GC_CLOCK_133_200:
6889         case GC_CLOCK_133_200_2:
6890         case GC_CLOCK_100_200:
6891                 return 200000;
6892         case GC_CLOCK_166_250:
6893                 return 250000;
6894         case GC_CLOCK_100_133:
6895                 return 133333;
6896         case GC_CLOCK_133_266:
6897         case GC_CLOCK_133_266_2:
6898         case GC_CLOCK_166_266:
6899                 return 266667;
6900         }
6901
6902         /* Shouldn't happen */
6903         return 0;
6904 }
6905
6906 static int i830_get_display_clock_speed(struct drm_device *dev)
6907 {
6908         return 133333;
6909 }
6910
6911 static unsigned int intel_hpll_vco(struct drm_device *dev)
6912 {
6913         struct drm_i915_private *dev_priv = dev->dev_private;
6914         static const unsigned int blb_vco[8] = {
6915                 [0] = 3200000,
6916                 [1] = 4000000,
6917                 [2] = 5333333,
6918                 [3] = 4800000,
6919                 [4] = 6400000,
6920         };
6921         static const unsigned int pnv_vco[8] = {
6922                 [0] = 3200000,
6923                 [1] = 4000000,
6924                 [2] = 5333333,
6925                 [3] = 4800000,
6926                 [4] = 2666667,
6927         };
6928         static const unsigned int cl_vco[8] = {
6929                 [0] = 3200000,
6930                 [1] = 4000000,
6931                 [2] = 5333333,
6932                 [3] = 6400000,
6933                 [4] = 3333333,
6934                 [5] = 3566667,
6935                 [6] = 4266667,
6936         };
6937         static const unsigned int elk_vco[8] = {
6938                 [0] = 3200000,
6939                 [1] = 4000000,
6940                 [2] = 5333333,
6941                 [3] = 4800000,
6942         };
6943         static const unsigned int ctg_vco[8] = {
6944                 [0] = 3200000,
6945                 [1] = 4000000,
6946                 [2] = 5333333,
6947                 [3] = 6400000,
6948                 [4] = 2666667,
6949                 [5] = 4266667,
6950         };
6951         const unsigned int *vco_table;
6952         unsigned int vco;
6953         uint8_t tmp = 0;
6954
6955         /* FIXME other chipsets? */
6956         if (IS_GM45(dev))
6957                 vco_table = ctg_vco;
6958         else if (IS_G4X(dev))
6959                 vco_table = elk_vco;
6960         else if (IS_CRESTLINE(dev))
6961                 vco_table = cl_vco;
6962         else if (IS_PINEVIEW(dev))
6963                 vco_table = pnv_vco;
6964         else if (IS_G33(dev))
6965                 vco_table = blb_vco;
6966         else
6967                 return 0;
6968
6969         tmp = I915_READ(IS_MOBILE(dev) ? HPLLVCO_MOBILE : HPLLVCO);
6970
6971         vco = vco_table[tmp & 0x7];
6972         if (vco == 0)
6973                 DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp);
6974         else
6975                 DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco);
6976
6977         return vco;
6978 }
6979
6980 static int gm45_get_display_clock_speed(struct drm_device *dev)
6981 {
6982         unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
6983         uint16_t tmp = 0;
6984
6985         pci_read_config_word(dev->pdev, GCFGC, &tmp);
6986
6987         cdclk_sel = (tmp >> 12) & 0x1;
6988
6989         switch (vco) {
6990         case 2666667:
6991         case 4000000:
6992         case 5333333:
6993                 return cdclk_sel ? 333333 : 222222;
6994         case 3200000:
6995                 return cdclk_sel ? 320000 : 228571;
6996         default:
6997                 DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", vco, tmp);
6998                 return 222222;
6999         }
7000 }
7001
7002 static int i965gm_get_display_clock_speed(struct drm_device *dev)
7003 {
7004         static const uint8_t div_3200[] = { 16, 10,  8 };
7005         static const uint8_t div_4000[] = { 20, 12, 10 };
7006         static const uint8_t div_5333[] = { 24, 16, 14 };
7007         const uint8_t *div_table;
7008         unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
7009         uint16_t tmp = 0;
7010
7011         pci_read_config_word(dev->pdev, GCFGC, &tmp);
7012
7013         cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
7014
7015         if (cdclk_sel >= ARRAY_SIZE(div_3200))
7016                 goto fail;
7017
7018         switch (vco) {
7019         case 3200000:
7020                 div_table = div_3200;
7021                 break;
7022         case 4000000:
7023                 div_table = div_4000;
7024                 break;
7025         case 5333333:
7026                 div_table = div_5333;
7027                 break;
7028         default:
7029                 goto fail;
7030         }
7031
7032         return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
7033
7034 fail:
7035         DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", vco, tmp);
7036         return 200000;
7037 }
7038
7039 static int g33_get_display_clock_speed(struct drm_device *dev)
7040 {
7041         static const uint8_t div_3200[] = { 12, 10,  8,  7, 5, 16 };
7042         static const uint8_t div_4000[] = { 14, 12, 10,  8, 6, 20 };
7043         static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 };
7044         static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 };
7045         const uint8_t *div_table;
7046         unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
7047         uint16_t tmp = 0;
7048
7049         pci_read_config_word(dev->pdev, GCFGC, &tmp);
7050
7051         cdclk_sel = (tmp >> 4) & 0x7;
7052
7053         if (cdclk_sel >= ARRAY_SIZE(div_3200))
7054                 goto fail;
7055
7056         switch (vco) {
7057         case 3200000:
7058                 div_table = div_3200;
7059                 break;
7060         case 4000000:
7061                 div_table = div_4000;
7062                 break;
7063         case 4800000:
7064                 div_table = div_4800;
7065                 break;
7066         case 5333333:
7067                 div_table = div_5333;
7068                 break;
7069         default:
7070                 goto fail;
7071         }
7072
7073         return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
7074
7075 fail:
7076         DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", vco, tmp);
7077         return 190476;
7078 }
7079
7080 static void
7081 intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
7082 {
7083         while (*num > DATA_LINK_M_N_MASK ||
7084                *den > DATA_LINK_M_N_MASK) {
7085                 *num >>= 1;
7086                 *den >>= 1;
7087         }
7088 }
7089
7090 static void compute_m_n(unsigned int m, unsigned int n,
7091                         uint32_t *ret_m, uint32_t *ret_n)
7092 {
7093         *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
7094         *ret_m = div_u64((uint64_t) m * *ret_n, n);
7095         intel_reduce_m_n_ratio(ret_m, ret_n);
7096 }
7097
7098 void
7099 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
7100                        int pixel_clock, int link_clock,
7101                        struct intel_link_m_n *m_n)
7102 {
7103         m_n->tu = 64;
7104
7105         compute_m_n(bits_per_pixel * pixel_clock,
7106                     link_clock * nlanes * 8,
7107                     &m_n->gmch_m, &m_n->gmch_n);
7108
7109         compute_m_n(pixel_clock, link_clock,
7110                     &m_n->link_m, &m_n->link_n);
7111 }
7112
7113 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
7114 {
7115         if (i915.panel_use_ssc >= 0)
7116                 return i915.panel_use_ssc != 0;
7117         return dev_priv->vbt.lvds_use_ssc
7118                 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
7119 }
7120
7121 static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
7122                            int num_connectors)
7123 {
7124         struct drm_device *dev = crtc_state->base.crtc->dev;
7125         struct drm_i915_private *dev_priv = dev->dev_private;
7126         int refclk;
7127
7128         WARN_ON(!crtc_state->base.state);
7129
7130         if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
7131                 refclk = 100000;
7132         } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7133             intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
7134                 refclk = dev_priv->vbt.lvds_ssc_freq;
7135                 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
7136         } else if (!IS_GEN2(dev)) {
7137                 refclk = 96000;
7138         } else {
7139                 refclk = 48000;
7140         }
7141
7142         return refclk;
7143 }
7144
7145 static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
7146 {
7147         return (1 << dpll->n) << 16 | dpll->m2;
7148 }
7149
7150 static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
7151 {
7152         return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
7153 }
7154
7155 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
7156                                      struct intel_crtc_state *crtc_state,
7157                                      intel_clock_t *reduced_clock)
7158 {
7159         struct drm_device *dev = crtc->base.dev;
7160         u32 fp, fp2 = 0;
7161
7162         if (IS_PINEVIEW(dev)) {
7163                 fp = pnv_dpll_compute_fp(&crtc_state->dpll);
7164                 if (reduced_clock)
7165                         fp2 = pnv_dpll_compute_fp(reduced_clock);
7166         } else {
7167                 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
7168                 if (reduced_clock)
7169                         fp2 = i9xx_dpll_compute_fp(reduced_clock);
7170         }
7171
7172         crtc_state->dpll_hw_state.fp0 = fp;
7173
7174         crtc->lowfreq_avail = false;
7175         if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7176             reduced_clock) {
7177                 crtc_state->dpll_hw_state.fp1 = fp2;
7178                 crtc->lowfreq_avail = true;
7179         } else {
7180                 crtc_state->dpll_hw_state.fp1 = fp;
7181         }
7182 }
7183
7184 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
7185                 pipe)
7186 {
7187         u32 reg_val;
7188
7189         /*
7190          * PLLB opamp always calibrates to max value of 0x3f, force enable it
7191          * and set it to a reasonable value instead.
7192          */
7193         reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
7194         reg_val &= 0xffffff00;
7195         reg_val |= 0x00000030;
7196         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
7197
7198         reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
7199         reg_val &= 0x8cffffff;
7200         reg_val = 0x8c000000;
7201         vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
7202
7203         reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
7204         reg_val &= 0xffffff00;
7205         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
7206
7207         reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
7208         reg_val &= 0x00ffffff;
7209         reg_val |= 0xb0000000;
7210         vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
7211 }
7212
7213 static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
7214                                          struct intel_link_m_n *m_n)
7215 {
7216         struct drm_device *dev = crtc->base.dev;
7217         struct drm_i915_private *dev_priv = dev->dev_private;
7218         int pipe = crtc->pipe;
7219
7220         I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
7221         I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
7222         I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
7223         I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
7224 }
7225
7226 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
7227                                          struct intel_link_m_n *m_n,
7228                                          struct intel_link_m_n *m2_n2)
7229 {
7230         struct drm_device *dev = crtc->base.dev;
7231         struct drm_i915_private *dev_priv = dev->dev_private;
7232         int pipe = crtc->pipe;
7233         enum transcoder transcoder = crtc->config->cpu_transcoder;
7234
7235         if (INTEL_INFO(dev)->gen >= 5) {
7236                 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
7237                 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
7238                 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
7239                 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
7240                 /* M2_N2 registers to be set only for gen < 8 (M2_N2 available
7241                  * for gen < 8) and if DRRS is supported (to make sure the
7242                  * registers are not unnecessarily accessed).
7243                  */
7244                 if (m2_n2 && (IS_CHERRYVIEW(dev) || INTEL_INFO(dev)->gen < 8) &&
7245                         crtc->config->has_drrs) {
7246                         I915_WRITE(PIPE_DATA_M2(transcoder),
7247                                         TU_SIZE(m2_n2->tu) | m2_n2->gmch_m);
7248                         I915_WRITE(PIPE_DATA_N2(transcoder), m2_n2->gmch_n);
7249                         I915_WRITE(PIPE_LINK_M2(transcoder), m2_n2->link_m);
7250                         I915_WRITE(PIPE_LINK_N2(transcoder), m2_n2->link_n);
7251                 }
7252         } else {
7253                 I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
7254                 I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
7255                 I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
7256                 I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
7257         }
7258 }
7259
7260 void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n)
7261 {
7262         struct intel_link_m_n *dp_m_n, *dp_m2_n2 = NULL;
7263
7264         if (m_n == M1_N1) {
7265                 dp_m_n = &crtc->config->dp_m_n;
7266                 dp_m2_n2 = &crtc->config->dp_m2_n2;
7267         } else if (m_n == M2_N2) {
7268
7269                 /*
7270                  * M2_N2 registers are not supported. Hence m2_n2 divider value
7271                  * needs to be programmed into M1_N1.
7272                  */
7273                 dp_m_n = &crtc->config->dp_m2_n2;
7274         } else {
7275                 DRM_ERROR("Unsupported divider value\n");
7276                 return;
7277         }
7278
7279         if (crtc->config->has_pch_encoder)
7280                 intel_pch_transcoder_set_m_n(crtc, &crtc->config->dp_m_n);
7281         else
7282                 intel_cpu_transcoder_set_m_n(crtc, dp_m_n, dp_m2_n2);
7283 }
7284
7285 static void vlv_compute_dpll(struct intel_crtc *crtc,
7286                              struct intel_crtc_state *pipe_config)
7287 {
7288         u32 dpll, dpll_md;
7289
7290         /*
7291          * Enable DPIO clock input. We should never disable the reference
7292          * clock for pipe B, since VGA hotplug / manual detection depends
7293          * on it.
7294          */
7295         dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REF_CLK_ENABLE_VLV |
7296                 DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_REF_CLK_VLV;
7297         /* We should never disable this, set it here for state tracking */
7298         if (crtc->pipe == PIPE_B)
7299                 dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
7300         dpll |= DPLL_VCO_ENABLE;
7301         pipe_config->dpll_hw_state.dpll = dpll;
7302
7303         dpll_md = (pipe_config->pixel_multiplier - 1)
7304                 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7305         pipe_config->dpll_hw_state.dpll_md = dpll_md;
7306 }
7307
7308 static void vlv_prepare_pll(struct intel_crtc *crtc,
7309                             const struct intel_crtc_state *pipe_config)
7310 {
7311         struct drm_device *dev = crtc->base.dev;
7312         struct drm_i915_private *dev_priv = dev->dev_private;
7313         int pipe = crtc->pipe;
7314         u32 mdiv;
7315         u32 bestn, bestm1, bestm2, bestp1, bestp2;
7316         u32 coreclk, reg_val;
7317
7318         mutex_lock(&dev_priv->sb_lock);
7319
7320         bestn = pipe_config->dpll.n;
7321         bestm1 = pipe_config->dpll.m1;
7322         bestm2 = pipe_config->dpll.m2;
7323         bestp1 = pipe_config->dpll.p1;
7324         bestp2 = pipe_config->dpll.p2;
7325
7326         /* See eDP HDMI DPIO driver vbios notes doc */
7327
7328         /* PLL B needs special handling */
7329         if (pipe == PIPE_B)
7330                 vlv_pllb_recal_opamp(dev_priv, pipe);
7331
7332         /* Set up Tx target for periodic Rcomp update */
7333         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
7334
7335         /* Disable target IRef on PLL */
7336         reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
7337         reg_val &= 0x00ffffff;
7338         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
7339
7340         /* Disable fast lock */
7341         vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
7342
7343         /* Set idtafcrecal before PLL is enabled */
7344         mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
7345         mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
7346         mdiv |= ((bestn << DPIO_N_SHIFT));
7347         mdiv |= (1 << DPIO_K_SHIFT);
7348
7349         /*
7350          * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
7351          * but we don't support that).
7352          * Note: don't use the DAC post divider as it seems unstable.
7353          */
7354         mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
7355         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
7356
7357         mdiv |= DPIO_ENABLE_CALIBRATION;
7358         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
7359
7360         /* Set HBR and RBR LPF coefficients */
7361         if (pipe_config->port_clock == 162000 ||
7362             intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG) ||
7363             intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
7364                 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
7365                                  0x009f0003);
7366         else
7367                 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
7368                                  0x00d0000f);
7369
7370         if (pipe_config->has_dp_encoder) {
7371                 /* Use SSC source */
7372                 if (pipe == PIPE_A)
7373                         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7374                                          0x0df40000);
7375                 else
7376                         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7377                                          0x0df70000);
7378         } else { /* HDMI or VGA */
7379                 /* Use bend source */
7380                 if (pipe == PIPE_A)
7381                         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7382                                          0x0df70000);
7383                 else
7384                         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7385                                          0x0df40000);
7386         }
7387
7388         coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
7389         coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
7390         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
7391             intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
7392                 coreclk |= 0x01000000;
7393         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
7394
7395         vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
7396         mutex_unlock(&dev_priv->sb_lock);
7397 }
7398
7399 static void chv_compute_dpll(struct intel_crtc *crtc,
7400                              struct intel_crtc_state *pipe_config)
7401 {
7402         pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
7403                 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
7404                 DPLL_VCO_ENABLE;
7405         if (crtc->pipe != PIPE_A)
7406                 pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
7407
7408         pipe_config->dpll_hw_state.dpll_md =
7409                 (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7410 }
7411
7412 static void chv_prepare_pll(struct intel_crtc *crtc,
7413                             const struct intel_crtc_state *pipe_config)
7414 {
7415         struct drm_device *dev = crtc->base.dev;
7416         struct drm_i915_private *dev_priv = dev->dev_private;
7417         int pipe = crtc->pipe;
7418         int dpll_reg = DPLL(crtc->pipe);
7419         enum dpio_channel port = vlv_pipe_to_channel(pipe);
7420         u32 loopfilter, tribuf_calcntr;
7421         u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
7422         u32 dpio_val;
7423         int vco;
7424
7425         bestn = pipe_config->dpll.n;
7426         bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
7427         bestm1 = pipe_config->dpll.m1;
7428         bestm2 = pipe_config->dpll.m2 >> 22;
7429         bestp1 = pipe_config->dpll.p1;
7430         bestp2 = pipe_config->dpll.p2;
7431         vco = pipe_config->dpll.vco;
7432         dpio_val = 0;
7433         loopfilter = 0;
7434
7435         /*
7436          * Enable Refclk and SSC
7437          */
7438         I915_WRITE(dpll_reg,
7439                    pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
7440
7441         mutex_lock(&dev_priv->sb_lock);
7442
7443         /* p1 and p2 divider */
7444         vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
7445                         5 << DPIO_CHV_S1_DIV_SHIFT |
7446                         bestp1 << DPIO_CHV_P1_DIV_SHIFT |
7447                         bestp2 << DPIO_CHV_P2_DIV_SHIFT |
7448                         1 << DPIO_CHV_K_DIV_SHIFT);
7449
7450         /* Feedback post-divider - m2 */
7451         vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
7452
7453         /* Feedback refclk divider - n and m1 */
7454         vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
7455                         DPIO_CHV_M1_DIV_BY_2 |
7456                         1 << DPIO_CHV_N_DIV_SHIFT);
7457
7458         /* M2 fraction division */
7459         vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
7460
7461         /* M2 fraction division enable */
7462         dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
7463         dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN);
7464         dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT);
7465         if (bestm2_frac)
7466                 dpio_val |= DPIO_CHV_FRAC_DIV_EN;
7467         vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);
7468
7469         /* Program digital lock detect threshold */
7470         dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
7471         dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
7472                                         DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
7473         dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
7474         if (!bestm2_frac)
7475                 dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
7476         vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);
7477
7478         /* Loop filter */
7479         if (vco == 5400000) {
7480                 loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT);
7481                 loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT);
7482                 loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT);
7483                 tribuf_calcntr = 0x9;
7484         } else if (vco <= 6200000) {
7485                 loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT);
7486                 loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT);
7487                 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7488                 tribuf_calcntr = 0x9;
7489         } else if (vco <= 6480000) {
7490                 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
7491                 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
7492                 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7493                 tribuf_calcntr = 0x8;
7494         } else {
7495                 /* Not supported. Apply the same limits as in the max case */
7496                 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
7497                 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
7498                 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
7499                 tribuf_calcntr = 0;
7500         }
7501         vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
7502
7503         dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port));
7504         dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK;
7505         dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT);
7506         vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val);
7507
7508         /* AFC Recal */
7509         vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
7510                         vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
7511                         DPIO_AFC_RECAL);
7512
7513         mutex_unlock(&dev_priv->sb_lock);
7514 }
7515
7516 /**
7517  * vlv_force_pll_on - forcibly enable just the PLL
7518  * @dev_priv: i915 private structure
7519  * @pipe: pipe PLL to enable
7520  * @dpll: PLL configuration
7521  *
7522  * Enable the PLL for @pipe using the supplied @dpll config. To be used
7523  * in cases where we need the PLL enabled even when @pipe is not going to
7524  * be enabled.
7525  */
7526 void vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
7527                       const struct dpll *dpll)
7528 {
7529         struct intel_crtc *crtc =
7530                 to_intel_crtc(intel_get_crtc_for_pipe(dev, pipe));
7531         struct intel_crtc_state pipe_config = {
7532                 .base.crtc = &crtc->base,
7533                 .pixel_multiplier = 1,
7534                 .dpll = *dpll,
7535         };
7536
7537         if (IS_CHERRYVIEW(dev)) {
7538                 chv_compute_dpll(crtc, &pipe_config);
7539                 chv_prepare_pll(crtc, &pipe_config);
7540                 chv_enable_pll(crtc, &pipe_config);
7541         } else {
7542                 vlv_compute_dpll(crtc, &pipe_config);
7543                 vlv_prepare_pll(crtc, &pipe_config);
7544                 vlv_enable_pll(crtc, &pipe_config);
7545         }
7546 }
7547
7548 /**
7549  * vlv_force_pll_off - forcibly disable just the PLL
7550  * @dev_priv: i915 private structure
7551  * @pipe: pipe PLL to disable
7552  *
7553  * Disable the PLL for @pipe. To be used in cases where we need
7554  * the PLL enabled even when @pipe is not going to be enabled.
7555  */
7556 void vlv_force_pll_off(struct drm_device *dev, enum pipe pipe)
7557 {
7558         if (IS_CHERRYVIEW(dev))
7559                 chv_disable_pll(to_i915(dev), pipe);
7560         else
7561                 vlv_disable_pll(to_i915(dev), pipe);
7562 }
7563
7564 static void i9xx_compute_dpll(struct intel_crtc *crtc,
7565                               struct intel_crtc_state *crtc_state,
7566                               intel_clock_t *reduced_clock,
7567                               int num_connectors)
7568 {
7569         struct drm_device *dev = crtc->base.dev;
7570         struct drm_i915_private *dev_priv = dev->dev_private;
7571         u32 dpll;
7572         bool is_sdvo;
7573         struct dpll *clock = &crtc_state->dpll;
7574
7575         i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
7576
7577         is_sdvo = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO) ||
7578                 intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI);
7579
7580         dpll = DPLL_VGA_MODE_DIS;
7581
7582         if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
7583                 dpll |= DPLLB_MODE_LVDS;
7584         else
7585                 dpll |= DPLLB_MODE_DAC_SERIAL;
7586
7587         if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
7588                 dpll |= (crtc_state->pixel_multiplier - 1)
7589                         << SDVO_MULTIPLIER_SHIFT_HIRES;
7590         }
7591
7592         if (is_sdvo)
7593                 dpll |= DPLL_SDVO_HIGH_SPEED;
7594
7595         if (crtc_state->has_dp_encoder)
7596                 dpll |= DPLL_SDVO_HIGH_SPEED;
7597
7598         /* compute bitmask from p1 value */
7599         if (IS_PINEVIEW(dev))
7600                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
7601         else {
7602                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7603                 if (IS_G4X(dev) && reduced_clock)
7604                         dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
7605         }
7606         switch (clock->p2) {
7607         case 5:
7608                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
7609                 break;
7610         case 7:
7611                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
7612                 break;
7613         case 10:
7614                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
7615                 break;
7616         case 14:
7617                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
7618                 break;
7619         }
7620         if (INTEL_INFO(dev)->gen >= 4)
7621                 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
7622
7623         if (crtc_state->sdvo_tv_clock)
7624                 dpll |= PLL_REF_INPUT_TVCLKINBC;
7625         else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7626                  intel_panel_use_ssc(dev_priv) && num_connectors < 2)
7627                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
7628         else
7629                 dpll |= PLL_REF_INPUT_DREFCLK;
7630
7631         dpll |= DPLL_VCO_ENABLE;
7632         crtc_state->dpll_hw_state.dpll = dpll;
7633
7634         if (INTEL_INFO(dev)->gen >= 4) {
7635                 u32 dpll_md = (crtc_state->pixel_multiplier - 1)
7636                         << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7637                 crtc_state->dpll_hw_state.dpll_md = dpll_md;
7638         }
7639 }
7640
7641 static void i8xx_compute_dpll(struct intel_crtc *crtc,
7642                               struct intel_crtc_state *crtc_state,
7643                               intel_clock_t *reduced_clock,
7644                               int num_connectors)
7645 {
7646         struct drm_device *dev = crtc->base.dev;
7647         struct drm_i915_private *dev_priv = dev->dev_private;
7648         u32 dpll;
7649         struct dpll *clock = &crtc_state->dpll;
7650
7651         i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
7652
7653         dpll = DPLL_VGA_MODE_DIS;
7654
7655         if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
7656                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7657         } else {
7658                 if (clock->p1 == 2)
7659                         dpll |= PLL_P1_DIVIDE_BY_TWO;
7660                 else
7661                         dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7662                 if (clock->p2 == 4)
7663                         dpll |= PLL_P2_DIVIDE_BY_4;
7664         }
7665
7666         if (!IS_I830(dev) && intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_DVO))
7667                 dpll |= DPLL_DVO_2X_MODE;
7668
7669         if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7670                  intel_panel_use_ssc(dev_priv) && num_connectors < 2)
7671                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
7672         else
7673                 dpll |= PLL_REF_INPUT_DREFCLK;
7674
7675         dpll |= DPLL_VCO_ENABLE;
7676         crtc_state->dpll_hw_state.dpll = dpll;
7677 }
7678
7679 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
7680 {
7681         struct drm_device *dev = intel_crtc->base.dev;
7682         struct drm_i915_private *dev_priv = dev->dev_private;
7683         enum pipe pipe = intel_crtc->pipe;
7684         enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
7685         const struct drm_display_mode *adjusted_mode = &intel_crtc->config->base.adjusted_mode;
7686         uint32_t crtc_vtotal, crtc_vblank_end;
7687         int vsyncshift = 0;
7688
7689         /* We need to be careful not to changed the adjusted mode, for otherwise
7690          * the hw state checker will get angry at the mismatch. */
7691         crtc_vtotal = adjusted_mode->crtc_vtotal;
7692         crtc_vblank_end = adjusted_mode->crtc_vblank_end;
7693
7694         if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
7695                 /* the chip adds 2 halflines automatically */
7696                 crtc_vtotal -= 1;
7697                 crtc_vblank_end -= 1;
7698
7699                 if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
7700                         vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2;
7701                 else
7702                         vsyncshift = adjusted_mode->crtc_hsync_start -
7703                                 adjusted_mode->crtc_htotal / 2;
7704                 if (vsyncshift < 0)
7705                         vsyncshift += adjusted_mode->crtc_htotal;
7706         }
7707
7708         if (INTEL_INFO(dev)->gen > 3)
7709                 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
7710
7711         I915_WRITE(HTOTAL(cpu_transcoder),
7712                    (adjusted_mode->crtc_hdisplay - 1) |
7713                    ((adjusted_mode->crtc_htotal - 1) << 16));
7714         I915_WRITE(HBLANK(cpu_transcoder),
7715                    (adjusted_mode->crtc_hblank_start - 1) |
7716                    ((adjusted_mode->crtc_hblank_end - 1) << 16));
7717         I915_WRITE(HSYNC(cpu_transcoder),
7718                    (adjusted_mode->crtc_hsync_start - 1) |
7719                    ((adjusted_mode->crtc_hsync_end - 1) << 16));
7720
7721         I915_WRITE(VTOTAL(cpu_transcoder),
7722                    (adjusted_mode->crtc_vdisplay - 1) |
7723                    ((crtc_vtotal - 1) << 16));
7724         I915_WRITE(VBLANK(cpu_transcoder),
7725                    (adjusted_mode->crtc_vblank_start - 1) |
7726                    ((crtc_vblank_end - 1) << 16));
7727         I915_WRITE(VSYNC(cpu_transcoder),
7728                    (adjusted_mode->crtc_vsync_start - 1) |
7729                    ((adjusted_mode->crtc_vsync_end - 1) << 16));
7730
7731         /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
7732          * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
7733          * documented on the DDI_FUNC_CTL register description, EDP Input Select
7734          * bits. */
7735         if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
7736             (pipe == PIPE_B || pipe == PIPE_C))
7737                 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
7738
7739         /* pipesrc controls the size that is scaled from, which should
7740          * always be the user's requested size.
7741          */
7742         I915_WRITE(PIPESRC(pipe),
7743                    ((intel_crtc->config->pipe_src_w - 1) << 16) |
7744                    (intel_crtc->config->pipe_src_h - 1));
7745 }
7746
7747 static void intel_get_pipe_timings(struct intel_crtc *crtc,
7748                                    struct intel_crtc_state *pipe_config)
7749 {
7750         struct drm_device *dev = crtc->base.dev;
7751         struct drm_i915_private *dev_priv = dev->dev_private;
7752         enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
7753         uint32_t tmp;
7754
7755         tmp = I915_READ(HTOTAL(cpu_transcoder));
7756         pipe_config->base.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
7757         pipe_config->base.adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
7758         tmp = I915_READ(HBLANK(cpu_transcoder));
7759         pipe_config->base.adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
7760         pipe_config->base.adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
7761         tmp = I915_READ(HSYNC(cpu_transcoder));
7762         pipe_config->base.adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
7763         pipe_config->base.adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
7764
7765         tmp = I915_READ(VTOTAL(cpu_transcoder));
7766         pipe_config->base.adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
7767         pipe_config->base.adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
7768         tmp = I915_READ(VBLANK(cpu_transcoder));
7769         pipe_config->base.adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
7770         pipe_config->base.adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
7771         tmp = I915_READ(VSYNC(cpu_transcoder));
7772         pipe_config->base.adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
7773         pipe_config->base.adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
7774
7775         if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
7776                 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
7777                 pipe_config->base.adjusted_mode.crtc_vtotal += 1;
7778                 pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
7779         }
7780
7781         tmp = I915_READ(PIPESRC(crtc->pipe));
7782         pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
7783         pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
7784
7785         pipe_config->base.mode.vdisplay = pipe_config->pipe_src_h;
7786         pipe_config->base.mode.hdisplay = pipe_config->pipe_src_w;
7787 }
7788
7789 void intel_mode_from_pipe_config(struct drm_display_mode *mode,
7790                                  struct intel_crtc_state *pipe_config)
7791 {
7792         mode->hdisplay = pipe_config->base.adjusted_mode.crtc_hdisplay;
7793         mode->htotal = pipe_config->base.adjusted_mode.crtc_htotal;
7794         mode->hsync_start = pipe_config->base.adjusted_mode.crtc_hsync_start;
7795         mode->hsync_end = pipe_config->base.adjusted_mode.crtc_hsync_end;
7796
7797         mode->vdisplay = pipe_config->base.adjusted_mode.crtc_vdisplay;
7798         mode->vtotal = pipe_config->base.adjusted_mode.crtc_vtotal;
7799         mode->vsync_start = pipe_config->base.adjusted_mode.crtc_vsync_start;
7800         mode->vsync_end = pipe_config->base.adjusted_mode.crtc_vsync_end;
7801
7802         mode->flags = pipe_config->base.adjusted_mode.flags;
7803         mode->type = DRM_MODE_TYPE_DRIVER;
7804
7805         mode->clock = pipe_config->base.adjusted_mode.crtc_clock;
7806         mode->flags |= pipe_config->base.adjusted_mode.flags;
7807
7808         mode->hsync = drm_mode_hsync(mode);
7809         mode->vrefresh = drm_mode_vrefresh(mode);
7810         drm_mode_set_name(mode);
7811 }
7812
7813 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
7814 {
7815         struct drm_device *dev = intel_crtc->base.dev;
7816         struct drm_i915_private *dev_priv = dev->dev_private;
7817         uint32_t pipeconf;
7818
7819         pipeconf = 0;
7820
7821         if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
7822             (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
7823                 pipeconf |= I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE;
7824
7825         if (intel_crtc->config->double_wide)
7826                 pipeconf |= PIPECONF_DOUBLE_WIDE;
7827
7828         /* only g4x and later have fancy bpc/dither controls */
7829         if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
7830                 /* Bspec claims that we can't use dithering for 30bpp pipes. */
7831                 if (intel_crtc->config->dither && intel_crtc->config->pipe_bpp != 30)
7832                         pipeconf |= PIPECONF_DITHER_EN |
7833                                     PIPECONF_DITHER_TYPE_SP;
7834
7835                 switch (intel_crtc->config->pipe_bpp) {
7836                 case 18:
7837                         pipeconf |= PIPECONF_6BPC;
7838                         break;
7839                 case 24:
7840                         pipeconf |= PIPECONF_8BPC;
7841                         break;
7842                 case 30:
7843                         pipeconf |= PIPECONF_10BPC;
7844                         break;
7845                 default:
7846                         /* Case prevented by intel_choose_pipe_bpp_dither. */
7847                         BUG();
7848                 }
7849         }
7850
7851         if (HAS_PIPE_CXSR(dev)) {
7852                 if (intel_crtc->lowfreq_avail) {
7853                         DRM_DEBUG_KMS("enabling CxSR downclocking\n");
7854                         pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
7855                 } else {
7856                         DRM_DEBUG_KMS("disabling CxSR downclocking\n");
7857                 }
7858         }
7859
7860         if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
7861                 if (INTEL_INFO(dev)->gen < 4 ||
7862                     intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
7863                         pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
7864                 else
7865                         pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT;
7866         } else
7867                 pipeconf |= PIPECONF_PROGRESSIVE;
7868
7869         if (IS_VALLEYVIEW(dev) && intel_crtc->config->limited_color_range)
7870                 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
7871
7872         I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
7873         POSTING_READ(PIPECONF(intel_crtc->pipe));
7874 }
7875
7876 static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
7877                                    struct intel_crtc_state *crtc_state)
7878 {
7879         struct drm_device *dev = crtc->base.dev;
7880         struct drm_i915_private *dev_priv = dev->dev_private;
7881         int refclk, num_connectors = 0;
7882         intel_clock_t clock;
7883         bool ok;
7884         bool is_dsi = false;
7885         struct intel_encoder *encoder;
7886         const intel_limit_t *limit;
7887         struct drm_atomic_state *state = crtc_state->base.state;
7888         struct drm_connector *connector;
7889         struct drm_connector_state *connector_state;
7890         int i;
7891
7892         memset(&crtc_state->dpll_hw_state, 0,
7893                sizeof(crtc_state->dpll_hw_state));
7894
7895         for_each_connector_in_state(state, connector, connector_state, i) {
7896                 if (connector_state->crtc != &crtc->base)
7897                         continue;
7898
7899                 encoder = to_intel_encoder(connector_state->best_encoder);
7900
7901                 switch (encoder->type) {
7902                 case INTEL_OUTPUT_DSI:
7903                         is_dsi = true;
7904                         break;
7905                 default:
7906                         break;
7907                 }
7908
7909                 num_connectors++;
7910         }
7911
7912         if (is_dsi)
7913                 return 0;
7914
7915         if (!crtc_state->clock_set) {
7916                 refclk = i9xx_get_refclk(crtc_state, num_connectors);
7917
7918                 /*
7919                  * Returns a set of divisors for the desired target clock with
7920                  * the given refclk, or FALSE.  The returned values represent
7921                  * the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
7922                  * 2) / p1 / p2.
7923                  */
7924                 limit = intel_limit(crtc_state, refclk);
7925                 ok = dev_priv->display.find_dpll(limit, crtc_state,
7926                                                  crtc_state->port_clock,
7927                                                  refclk, NULL, &clock);
7928                 if (!ok) {
7929                         DRM_ERROR("Couldn't find PLL settings for mode!\n");
7930                         return -EINVAL;
7931                 }
7932
7933                 /* Compat-code for transition, will disappear. */
7934                 crtc_state->dpll.n = clock.n;
7935                 crtc_state->dpll.m1 = clock.m1;
7936                 crtc_state->dpll.m2 = clock.m2;
7937                 crtc_state->dpll.p1 = clock.p1;
7938                 crtc_state->dpll.p2 = clock.p2;
7939         }
7940
7941         if (IS_GEN2(dev)) {
7942                 i8xx_compute_dpll(crtc, crtc_state, NULL,
7943                                   num_connectors);
7944         } else if (IS_CHERRYVIEW(dev)) {
7945                 chv_compute_dpll(crtc, crtc_state);
7946         } else if (IS_VALLEYVIEW(dev)) {
7947                 vlv_compute_dpll(crtc, crtc_state);
7948         } else {
7949                 i9xx_compute_dpll(crtc, crtc_state, NULL,
7950                                   num_connectors);
7951         }
7952
7953         return 0;
7954 }
7955
7956 static void i9xx_get_pfit_config(struct intel_crtc *crtc,
7957                                  struct intel_crtc_state *pipe_config)
7958 {
7959         struct drm_device *dev = crtc->base.dev;
7960         struct drm_i915_private *dev_priv = dev->dev_private;
7961         uint32_t tmp;
7962
7963         if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev)))
7964                 return;
7965
7966         tmp = I915_READ(PFIT_CONTROL);
7967         if (!(tmp & PFIT_ENABLE))
7968                 return;
7969
7970         /* Check whether the pfit is attached to our pipe. */
7971         if (INTEL_INFO(dev)->gen < 4) {
7972                 if (crtc->pipe != PIPE_B)
7973                         return;
7974         } else {
7975                 if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
7976                         return;
7977         }
7978
7979         pipe_config->gmch_pfit.control = tmp;
7980         pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
7981         if (INTEL_INFO(dev)->gen < 5)
7982                 pipe_config->gmch_pfit.lvds_border_bits =
7983                         I915_READ(LVDS) & LVDS_BORDER_ENABLE;
7984 }
7985
7986 static void vlv_crtc_clock_get(struct intel_crtc *crtc,
7987                                struct intel_crtc_state *pipe_config)
7988 {
7989         struct drm_device *dev = crtc->base.dev;
7990         struct drm_i915_private *dev_priv = dev->dev_private;
7991         int pipe = pipe_config->cpu_transcoder;
7992         intel_clock_t clock;
7993         u32 mdiv;
7994         int refclk = 100000;
7995
7996         /* In case of MIPI DPLL will not even be used */
7997         if (!(pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE))
7998                 return;
7999
8000         mutex_lock(&dev_priv->sb_lock);
8001         mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
8002         mutex_unlock(&dev_priv->sb_lock);
8003
8004         clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
8005         clock.m2 = mdiv & DPIO_M2DIV_MASK;
8006         clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
8007         clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
8008         clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
8009
8010         pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock);
8011 }
8012
8013 static void
8014 i9xx_get_initial_plane_config(struct intel_crtc *crtc,
8015                               struct intel_initial_plane_config *plane_config)
8016 {
8017         struct drm_device *dev = crtc->base.dev;
8018         struct drm_i915_private *dev_priv = dev->dev_private;
8019         u32 val, base, offset;
8020         int pipe = crtc->pipe, plane = crtc->plane;
8021         int fourcc, pixel_format;
8022         unsigned int aligned_height;
8023         struct drm_framebuffer *fb;
8024         struct intel_framebuffer *intel_fb;
8025
8026         val = I915_READ(DSPCNTR(plane));
8027         if (!(val & DISPLAY_PLANE_ENABLE))
8028                 return;
8029
8030         intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
8031         if (!intel_fb) {
8032                 DRM_DEBUG_KMS("failed to alloc fb\n");
8033                 return;
8034         }
8035
8036         fb = &intel_fb->base;
8037
8038         if (INTEL_INFO(dev)->gen >= 4) {
8039                 if (val & DISPPLANE_TILED) {
8040                         plane_config->tiling = I915_TILING_X;
8041                         fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
8042                 }
8043         }
8044
8045         pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
8046         fourcc = i9xx_format_to_fourcc(pixel_format);
8047         fb->pixel_format = fourcc;
8048         fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
8049
8050         if (INTEL_INFO(dev)->gen >= 4) {
8051                 if (plane_config->tiling)
8052                         offset = I915_READ(DSPTILEOFF(plane));
8053                 else
8054                         offset = I915_READ(DSPLINOFF(plane));
8055                 base = I915_READ(DSPSURF(plane)) & 0xfffff000;
8056         } else {
8057                 base = I915_READ(DSPADDR(plane));
8058         }
8059         plane_config->base = base;
8060
8061         val = I915_READ(PIPESRC(pipe));
8062         fb->width = ((val >> 16) & 0xfff) + 1;
8063         fb->height = ((val >> 0) & 0xfff) + 1;
8064
8065         val = I915_READ(DSPSTRIDE(pipe));
8066         fb->pitches[0] = val & 0xffffffc0;
8067
8068         aligned_height = intel_fb_align_height(dev, fb->height,
8069                                                fb->pixel_format,
8070                                                fb->modifier[0]);
8071
8072         plane_config->size = fb->pitches[0] * aligned_height;
8073
8074         DRM_DEBUG_KMS("pipe/plane %c/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
8075                       pipe_name(pipe), plane, fb->width, fb->height,
8076                       fb->bits_per_pixel, base, fb->pitches[0],
8077                       plane_config->size);
8078
8079         plane_config->fb = intel_fb;
8080 }
8081
8082 static void chv_crtc_clock_get(struct intel_crtc *crtc,
8083                                struct intel_crtc_state *pipe_config)
8084 {
8085         struct drm_device *dev = crtc->base.dev;
8086         struct drm_i915_private *dev_priv = dev->dev_private;
8087         int pipe = pipe_config->cpu_transcoder;
8088         enum dpio_channel port = vlv_pipe_to_channel(pipe);
8089         intel_clock_t clock;
8090         u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3;
8091         int refclk = 100000;
8092
8093         mutex_lock(&dev_priv->sb_lock);
8094         cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
8095         pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
8096         pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
8097         pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
8098         pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
8099         mutex_unlock(&dev_priv->sb_lock);
8100
8101         clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
8102         clock.m2 = (pll_dw0 & 0xff) << 22;
8103         if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN)
8104                 clock.m2 |= pll_dw2 & 0x3fffff;
8105         clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
8106         clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
8107         clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
8108
8109         pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
8110 }
8111
8112 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
8113                                  struct intel_crtc_state *pipe_config)
8114 {
8115         struct drm_device *dev = crtc->base.dev;
8116         struct drm_i915_private *dev_priv = dev->dev_private;
8117         uint32_t tmp;
8118
8119         if (!intel_display_power_is_enabled(dev_priv,
8120                                             POWER_DOMAIN_PIPE(crtc->pipe)))
8121                 return false;
8122
8123         pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
8124         pipe_config->shared_dpll = DPLL_ID_PRIVATE;
8125
8126         tmp = I915_READ(PIPECONF(crtc->pipe));
8127         if (!(tmp & PIPECONF_ENABLE))
8128                 return false;
8129
8130         if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
8131                 switch (tmp & PIPECONF_BPC_MASK) {
8132                 case PIPECONF_6BPC:
8133                         pipe_config->pipe_bpp = 18;
8134                         break;
8135                 case PIPECONF_8BPC:
8136                         pipe_config->pipe_bpp = 24;
8137                         break;
8138                 case PIPECONF_10BPC:
8139                         pipe_config->pipe_bpp = 30;
8140                         break;
8141                 default:
8142                         break;
8143                 }
8144         }
8145
8146         if (IS_VALLEYVIEW(dev) && (tmp & PIPECONF_COLOR_RANGE_SELECT))
8147                 pipe_config->limited_color_range = true;
8148
8149         if (INTEL_INFO(dev)->gen < 4)
8150                 pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
8151
8152         intel_get_pipe_timings(crtc, pipe_config);
8153
8154         i9xx_get_pfit_config(crtc, pipe_config);
8155
8156         if (INTEL_INFO(dev)->gen >= 4) {
8157                 tmp = I915_READ(DPLL_MD(crtc->pipe));
8158                 pipe_config->pixel_multiplier =
8159                         ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
8160                          >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
8161                 pipe_config->dpll_hw_state.dpll_md = tmp;
8162         } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
8163                 tmp = I915_READ(DPLL(crtc->pipe));
8164                 pipe_config->pixel_multiplier =
8165                         ((tmp & SDVO_MULTIPLIER_MASK)
8166                          >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
8167         } else {
8168                 /* Note that on i915G/GM the pixel multiplier is in the sdvo
8169                  * port and will be fixed up in the encoder->get_config
8170                  * function. */
8171                 pipe_config->pixel_multiplier = 1;
8172         }
8173         pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
8174         if (!IS_VALLEYVIEW(dev)) {
8175                 /*
8176                  * DPLL_DVO_2X_MODE must be enabled for both DPLLs
8177                  * on 830. Filter it out here so that we don't
8178                  * report errors due to that.
8179                  */
8180                 if (IS_I830(dev))
8181                         pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE;
8182
8183                 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
8184                 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
8185         } else {
8186                 /* Mask out read-only status bits. */
8187                 pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
8188                                                      DPLL_PORTC_READY_MASK |
8189                                                      DPLL_PORTB_READY_MASK);
8190         }
8191
8192         if (IS_CHERRYVIEW(dev))
8193                 chv_crtc_clock_get(crtc, pipe_config);
8194         else if (IS_VALLEYVIEW(dev))
8195                 vlv_crtc_clock_get(crtc, pipe_config);
8196         else
8197                 i9xx_crtc_clock_get(crtc, pipe_config);
8198
8199         /*
8200          * Normally the dotclock is filled in by the encoder .get_config()
8201          * but in case the pipe is enabled w/o any ports we need a sane
8202          * default.
8203          */
8204         pipe_config->base.adjusted_mode.crtc_clock =
8205                 pipe_config->port_clock / pipe_config->pixel_multiplier;
8206
8207         return true;
8208 }
8209
8210 static void ironlake_init_pch_refclk(struct drm_device *dev)
8211 {
8212         struct drm_i915_private *dev_priv = dev->dev_private;
8213         struct intel_encoder *encoder;
8214         u32 val, final;
8215         bool has_lvds = false;
8216         bool has_cpu_edp = false;
8217         bool has_panel = false;
8218         bool has_ck505 = false;
8219         bool can_ssc = false;
8220
8221         /* We need to take the global config into account */
8222         for_each_intel_encoder(dev, encoder) {
8223                 switch (encoder->type) {
8224                 case INTEL_OUTPUT_LVDS:
8225                         has_panel = true;
8226                         has_lvds = true;
8227                         break;
8228                 case INTEL_OUTPUT_EDP:
8229                         has_panel = true;
8230                         if (enc_to_dig_port(&encoder->base)->port == PORT_A)
8231                                 has_cpu_edp = true;
8232                         break;
8233                 default:
8234                         break;
8235                 }
8236         }
8237
8238         if (HAS_PCH_IBX(dev)) {
8239                 has_ck505 = dev_priv->vbt.display_clock_mode;
8240                 can_ssc = has_ck505;
8241         } else {
8242                 has_ck505 = false;
8243                 can_ssc = true;
8244         }
8245
8246         DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n",
8247                       has_panel, has_lvds, has_ck505);
8248
8249         /* Ironlake: try to setup display ref clock before DPLL
8250          * enabling. This is only under driver's control after
8251          * PCH B stepping, previous chipset stepping should be
8252          * ignoring this setting.
8253          */
8254         val = I915_READ(PCH_DREF_CONTROL);
8255
8256         /* As we must carefully and slowly disable/enable each source in turn,
8257          * compute the final state we want first and check if we need to
8258          * make any changes at all.
8259          */
8260         final = val;
8261         final &= ~DREF_NONSPREAD_SOURCE_MASK;
8262         if (has_ck505)
8263                 final |= DREF_NONSPREAD_CK505_ENABLE;
8264         else
8265                 final |= DREF_NONSPREAD_SOURCE_ENABLE;
8266
8267         final &= ~DREF_SSC_SOURCE_MASK;
8268         final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8269         final &= ~DREF_SSC1_ENABLE;
8270
8271         if (has_panel) {
8272                 final |= DREF_SSC_SOURCE_ENABLE;
8273
8274                 if (intel_panel_use_ssc(dev_priv) && can_ssc)
8275                         final |= DREF_SSC1_ENABLE;
8276
8277                 if (has_cpu_edp) {
8278                         if (intel_panel_use_ssc(dev_priv) && can_ssc)
8279                                 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
8280                         else
8281                                 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
8282                 } else
8283                         final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8284         } else {
8285                 final |= DREF_SSC_SOURCE_DISABLE;
8286                 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8287         }
8288
8289         if (final == val)
8290                 return;
8291
8292         /* Always enable nonspread source */
8293         val &= ~DREF_NONSPREAD_SOURCE_MASK;
8294
8295         if (has_ck505)
8296                 val |= DREF_NONSPREAD_CK505_ENABLE;
8297         else
8298                 val |= DREF_NONSPREAD_SOURCE_ENABLE;
8299
8300         if (has_panel) {
8301                 val &= ~DREF_SSC_SOURCE_MASK;
8302                 val |= DREF_SSC_SOURCE_ENABLE;
8303
8304                 /* SSC must be turned on before enabling the CPU output  */
8305                 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
8306                         DRM_DEBUG_KMS("Using SSC on panel\n");
8307                         val |= DREF_SSC1_ENABLE;
8308                 } else
8309                         val &= ~DREF_SSC1_ENABLE;
8310
8311                 /* Get SSC going before enabling the outputs */
8312                 I915_WRITE(PCH_DREF_CONTROL, val);
8313                 POSTING_READ(PCH_DREF_CONTROL);
8314                 udelay(200);
8315
8316                 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8317
8318                 /* Enable CPU source on CPU attached eDP */
8319                 if (has_cpu_edp) {
8320                         if (intel_panel_use_ssc(dev_priv) && can_ssc) {
8321                                 DRM_DEBUG_KMS("Using SSC on eDP\n");
8322                                 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
8323                         } else
8324                                 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
8325                 } else
8326                         val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8327
8328                 I915_WRITE(PCH_DREF_CONTROL, val);
8329                 POSTING_READ(PCH_DREF_CONTROL);
8330                 udelay(200);
8331         } else {
8332                 DRM_DEBUG_KMS("Disabling SSC entirely\n");
8333
8334                 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
8335
8336                 /* Turn off CPU output */
8337                 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
8338
8339                 I915_WRITE(PCH_DREF_CONTROL, val);
8340                 POSTING_READ(PCH_DREF_CONTROL);
8341                 udelay(200);
8342
8343                 /* Turn off the SSC source */
8344                 val &= ~DREF_SSC_SOURCE_MASK;
8345                 val |= DREF_SSC_SOURCE_DISABLE;
8346
8347                 /* Turn off SSC1 */
8348                 val &= ~DREF_SSC1_ENABLE;
8349
8350                 I915_WRITE(PCH_DREF_CONTROL, val);
8351                 POSTING_READ(PCH_DREF_CONTROL);
8352                 udelay(200);
8353         }
8354
8355         BUG_ON(val != final);
8356 }
8357
8358 static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
8359 {
8360         uint32_t tmp;
8361
8362         tmp = I915_READ(SOUTH_CHICKEN2);
8363         tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
8364         I915_WRITE(SOUTH_CHICKEN2, tmp);
8365
8366         if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
8367                                FDI_MPHY_IOSFSB_RESET_STATUS, 100))
8368                 DRM_ERROR("FDI mPHY reset assert timeout\n");
8369
8370         tmp = I915_READ(SOUTH_CHICKEN2);
8371         tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
8372         I915_WRITE(SOUTH_CHICKEN2, tmp);
8373
8374         if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
8375                                 FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
8376                 DRM_ERROR("FDI mPHY reset de-assert timeout\n");
8377 }
8378
8379 /* WaMPhyProgramming:hsw */
8380 static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
8381 {
8382         uint32_t tmp;
8383
8384         tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
8385         tmp &= ~(0xFF << 24);
8386         tmp |= (0x12 << 24);
8387         intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
8388
8389         tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
8390         tmp |= (1 << 11);
8391         intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
8392
8393         tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
8394         tmp |= (1 << 11);
8395         intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
8396
8397         tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
8398         tmp |= (1 << 24) | (1 << 21) | (1 << 18);
8399         intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
8400
8401         tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
8402         tmp |= (1 << 24) | (1 << 21) | (1 << 18);
8403         intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
8404
8405         tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
8406         tmp &= ~(7 << 13);
8407         tmp |= (5 << 13);
8408         intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
8409
8410         tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
8411         tmp &= ~(7 << 13);
8412         tmp |= (5 << 13);
8413         intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
8414
8415         tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
8416         tmp &= ~0xFF;
8417         tmp |= 0x1C;
8418         intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
8419
8420         tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
8421         tmp &= ~0xFF;
8422         tmp |= 0x1C;
8423         intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
8424
8425         tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
8426         tmp &= ~(0xFF << 16);
8427         tmp |= (0x1C << 16);
8428         intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
8429
8430         tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
8431         tmp &= ~(0xFF << 16);
8432         tmp |= (0x1C << 16);
8433         intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
8434
8435         tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
8436         tmp |= (1 << 27);
8437         intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
8438
8439         tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
8440         tmp |= (1 << 27);
8441         intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
8442
8443         tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
8444         tmp &= ~(0xF << 28);
8445         tmp |= (4 << 28);
8446         intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
8447
8448         tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
8449         tmp &= ~(0xF << 28);
8450         tmp |= (4 << 28);
8451         intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
8452 }
8453
8454 /* Implements 3 different sequences from BSpec chapter "Display iCLK
8455  * Programming" based on the parameters passed:
8456  * - Sequence to enable CLKOUT_DP
8457  * - Sequence to enable CLKOUT_DP without spread
8458  * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
8459  */
8460 static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
8461                                  bool with_fdi)
8462 {
8463         struct drm_i915_private *dev_priv = dev->dev_private;
8464         uint32_t reg, tmp;
8465
8466         if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
8467                 with_spread = true;
8468         if (WARN(HAS_PCH_LPT_LP(dev) && with_fdi, "LP PCH doesn't have FDI\n"))
8469                 with_fdi = false;
8470
8471         mutex_lock(&dev_priv->sb_lock);
8472
8473         tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8474         tmp &= ~SBI_SSCCTL_DISABLE;
8475         tmp |= SBI_SSCCTL_PATHALT;
8476         intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8477
8478         udelay(24);
8479
8480         if (with_spread) {
8481                 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8482                 tmp &= ~SBI_SSCCTL_PATHALT;
8483                 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8484
8485                 if (with_fdi) {
8486                         lpt_reset_fdi_mphy(dev_priv);
8487                         lpt_program_fdi_mphy(dev_priv);
8488                 }
8489         }
8490
8491         reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
8492         tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
8493         tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
8494         intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
8495
8496         mutex_unlock(&dev_priv->sb_lock);
8497 }
8498
8499 /* Sequence to disable CLKOUT_DP */
8500 static void lpt_disable_clkout_dp(struct drm_device *dev)
8501 {
8502         struct drm_i915_private *dev_priv = dev->dev_private;
8503         uint32_t reg, tmp;
8504
8505         mutex_lock(&dev_priv->sb_lock);
8506
8507         reg = HAS_PCH_LPT_LP(dev) ? SBI_GEN0 : SBI_DBUFF0;
8508         tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
8509         tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
8510         intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
8511
8512         tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
8513         if (!(tmp & SBI_SSCCTL_DISABLE)) {
8514                 if (!(tmp & SBI_SSCCTL_PATHALT)) {
8515                         tmp |= SBI_SSCCTL_PATHALT;
8516                         intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8517                         udelay(32);
8518                 }
8519                 tmp |= SBI_SSCCTL_DISABLE;
8520                 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
8521         }
8522
8523         mutex_unlock(&dev_priv->sb_lock);
8524 }
8525
8526 static void lpt_init_pch_refclk(struct drm_device *dev)
8527 {
8528         struct intel_encoder *encoder;
8529         bool has_vga = false;
8530
8531         for_each_intel_encoder(dev, encoder) {
8532                 switch (encoder->type) {
8533                 case INTEL_OUTPUT_ANALOG:
8534                         has_vga = true;
8535                         break;
8536                 default:
8537                         break;
8538                 }
8539         }
8540
8541         if (has_vga)
8542                 lpt_enable_clkout_dp(dev, true, true);
8543         else
8544                 lpt_disable_clkout_dp(dev);
8545 }
8546
8547 /*
8548  * Initialize reference clocks when the driver loads
8549  */
8550 void intel_init_pch_refclk(struct drm_device *dev)
8551 {
8552         if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
8553                 ironlake_init_pch_refclk(dev);
8554         else if (HAS_PCH_LPT(dev))
8555                 lpt_init_pch_refclk(dev);
8556 }
8557
8558 static int ironlake_get_refclk(struct intel_crtc_state *crtc_state)
8559 {
8560         struct drm_device *dev = crtc_state->base.crtc->dev;
8561         struct drm_i915_private *dev_priv = dev->dev_private;
8562         struct drm_atomic_state *state = crtc_state->base.state;
8563         struct drm_connector *connector;
8564         struct drm_connector_state *connector_state;
8565         struct intel_encoder *encoder;
8566         int num_connectors = 0, i;
8567         bool is_lvds = false;
8568
8569         for_each_connector_in_state(state, connector, connector_state, i) {
8570                 if (connector_state->crtc != crtc_state->base.crtc)
8571                         continue;
8572
8573                 encoder = to_intel_encoder(connector_state->best_encoder);
8574
8575                 switch (encoder->type) {
8576                 case INTEL_OUTPUT_LVDS:
8577                         is_lvds = true;
8578                         break;
8579                 default:
8580                         break;
8581                 }
8582                 num_connectors++;
8583         }
8584
8585         if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
8586                 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
8587                               dev_priv->vbt.lvds_ssc_freq);
8588                 return dev_priv->vbt.lvds_ssc_freq;
8589         }
8590
8591         return 120000;
8592 }
8593
8594 static void ironlake_set_pipeconf(struct drm_crtc *crtc)
8595 {
8596         struct drm_i915_private *dev_priv = crtc->dev->dev_private;
8597         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8598         int pipe = intel_crtc->pipe;
8599         uint32_t val;
8600
8601         val = 0;
8602
8603         switch (intel_crtc->config->pipe_bpp) {
8604         case 18:
8605                 val |= PIPECONF_6BPC;
8606                 break;
8607         case 24:
8608                 val |= PIPECONF_8BPC;
8609                 break;
8610         case 30:
8611                 val |= PIPECONF_10BPC;
8612                 break;
8613         case 36:
8614                 val |= PIPECONF_12BPC;
8615                 break;
8616         default:
8617                 /* Case prevented by intel_choose_pipe_bpp_dither. */
8618                 BUG();
8619         }
8620
8621         if (intel_crtc->config->dither)
8622                 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
8623
8624         if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
8625                 val |= PIPECONF_INTERLACED_ILK;
8626         else
8627                 val |= PIPECONF_PROGRESSIVE;
8628
8629         if (intel_crtc->config->limited_color_range)
8630                 val |= PIPECONF_COLOR_RANGE_SELECT;
8631
8632         I915_WRITE(PIPECONF(pipe), val);
8633         POSTING_READ(PIPECONF(pipe));
8634 }
8635
8636 /*
8637  * Set up the pipe CSC unit.
8638  *
8639  * Currently only full range RGB to limited range RGB conversion
8640  * is supported, but eventually this should handle various
8641  * RGB<->YCbCr scenarios as well.
8642  */
8643 static void intel_set_pipe_csc(struct drm_crtc *crtc)
8644 {
8645         struct drm_device *dev = crtc->dev;
8646         struct drm_i915_private *dev_priv = dev->dev_private;
8647         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8648         int pipe = intel_crtc->pipe;
8649         uint16_t coeff = 0x7800; /* 1.0 */
8650
8651         /*
8652          * TODO: Check what kind of values actually come out of the pipe
8653          * with these coeff/postoff values and adjust to get the best
8654          * accuracy. Perhaps we even need to take the bpc value into
8655          * consideration.
8656          */
8657
8658         if (intel_crtc->config->limited_color_range)
8659                 coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
8660
8661         /*
8662          * GY/GU and RY/RU should be the other way around according
8663          * to BSpec, but reality doesn't agree. Just set them up in
8664          * a way that results in the correct picture.
8665          */
8666         I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), coeff << 16);
8667         I915_WRITE(PIPE_CSC_COEFF_BY(pipe), 0);
8668
8669         I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), coeff);
8670         I915_WRITE(PIPE_CSC_COEFF_BU(pipe), 0);
8671
8672         I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), 0);
8673         I915_WRITE(PIPE_CSC_COEFF_BV(pipe), coeff << 16);
8674
8675         I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0);
8676         I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0);
8677         I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0);
8678
8679         if (INTEL_INFO(dev)->gen > 6) {
8680                 uint16_t postoff = 0;
8681
8682                 if (intel_crtc->config->limited_color_range)
8683                         postoff = (16 * (1 << 12) / 255) & 0x1fff;
8684
8685                 I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
8686                 I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
8687                 I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
8688
8689                 I915_WRITE(PIPE_CSC_MODE(pipe), 0);
8690         } else {
8691                 uint32_t mode = CSC_MODE_YUV_TO_RGB;
8692
8693                 if (intel_crtc->config->limited_color_range)
8694                         mode |= CSC_BLACK_SCREEN_OFFSET;
8695
8696                 I915_WRITE(PIPE_CSC_MODE(pipe), mode);
8697         }
8698 }
8699
8700 static void haswell_set_pipeconf(struct drm_crtc *crtc)
8701 {
8702         struct drm_device *dev = crtc->dev;
8703         struct drm_i915_private *dev_priv = dev->dev_private;
8704         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8705         enum pipe pipe = intel_crtc->pipe;
8706         enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
8707         uint32_t val;
8708
8709         val = 0;
8710
8711         if (IS_HASWELL(dev) && intel_crtc->config->dither)
8712                 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
8713
8714         if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
8715                 val |= PIPECONF_INTERLACED_ILK;
8716         else
8717                 val |= PIPECONF_PROGRESSIVE;
8718
8719         I915_WRITE(PIPECONF(cpu_transcoder), val);
8720         POSTING_READ(PIPECONF(cpu_transcoder));
8721
8722         I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT);
8723         POSTING_READ(GAMMA_MODE(intel_crtc->pipe));
8724
8725         if (IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) {
8726                 val = 0;
8727
8728                 switch (intel_crtc->config->pipe_bpp) {
8729                 case 18:
8730                         val |= PIPEMISC_DITHER_6_BPC;
8731                         break;
8732                 case 24:
8733                         val |= PIPEMISC_DITHER_8_BPC;
8734                         break;
8735                 case 30:
8736                         val |= PIPEMISC_DITHER_10_BPC;
8737                         break;
8738                 case 36:
8739                         val |= PIPEMISC_DITHER_12_BPC;
8740                         break;
8741                 default:
8742                         /* Case prevented by pipe_config_set_bpp. */
8743                         BUG();
8744                 }
8745
8746                 if (intel_crtc->config->dither)
8747                         val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
8748
8749                 I915_WRITE(PIPEMISC(pipe), val);
8750         }
8751 }
8752
8753 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
8754                                     struct intel_crtc_state *crtc_state,
8755                                     intel_clock_t *clock,
8756                                     bool *has_reduced_clock,
8757                                     intel_clock_t *reduced_clock)
8758 {
8759         struct drm_device *dev = crtc->dev;
8760         struct drm_i915_private *dev_priv = dev->dev_private;
8761         int refclk;
8762         const intel_limit_t *limit;
8763         bool ret;
8764
8765         refclk = ironlake_get_refclk(crtc_state);
8766
8767         /*
8768          * Returns a set of divisors for the desired target clock with the given
8769          * refclk, or FALSE.  The returned values represent the clock equation:
8770          * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
8771          */
8772         limit = intel_limit(crtc_state, refclk);
8773         ret = dev_priv->display.find_dpll(limit, crtc_state,
8774                                           crtc_state->port_clock,
8775                                           refclk, NULL, clock);
8776         if (!ret)
8777                 return false;
8778
8779         return true;
8780 }
8781
8782 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
8783 {
8784         /*
8785          * Account for spread spectrum to avoid
8786          * oversubscribing the link. Max center spread
8787          * is 2.5%; use 5% for safety's sake.
8788          */
8789         u32 bps = target_clock * bpp * 21 / 20;
8790         return DIV_ROUND_UP(bps, link_bw * 8);
8791 }
8792
8793 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
8794 {
8795         return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
8796 }
8797
8798 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
8799                                       struct intel_crtc_state *crtc_state,
8800                                       u32 *fp,
8801                                       intel_clock_t *reduced_clock, u32 *fp2)
8802 {
8803         struct drm_crtc *crtc = &intel_crtc->base;
8804         struct drm_device *dev = crtc->dev;
8805         struct drm_i915_private *dev_priv = dev->dev_private;
8806         struct drm_atomic_state *state = crtc_state->base.state;
8807         struct drm_connector *connector;
8808         struct drm_connector_state *connector_state;
8809         struct intel_encoder *encoder;
8810         uint32_t dpll;
8811         int factor, num_connectors = 0, i;
8812         bool is_lvds = false, is_sdvo = false;
8813
8814         for_each_connector_in_state(state, connector, connector_state, i) {
8815                 if (connector_state->crtc != crtc_state->base.crtc)
8816                         continue;
8817
8818                 encoder = to_intel_encoder(connector_state->best_encoder);
8819
8820                 switch (encoder->type) {
8821                 case INTEL_OUTPUT_LVDS:
8822                         is_lvds = true;
8823                         break;
8824                 case INTEL_OUTPUT_SDVO:
8825                 case INTEL_OUTPUT_HDMI:
8826                         is_sdvo = true;
8827                         break;
8828                 default:
8829                         break;
8830                 }
8831
8832                 num_connectors++;
8833         }
8834
8835         /* Enable autotuning of the PLL clock (if permissible) */
8836         factor = 21;
8837         if (is_lvds) {
8838                 if ((intel_panel_use_ssc(dev_priv) &&
8839                      dev_priv->vbt.lvds_ssc_freq == 100000) ||
8840                     (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
8841                         factor = 25;
8842         } else if (crtc_state->sdvo_tv_clock)
8843                 factor = 20;
8844
8845         if (ironlake_needs_fb_cb_tune(&crtc_state->dpll, factor))
8846                 *fp |= FP_CB_TUNE;
8847
8848         if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
8849                 *fp2 |= FP_CB_TUNE;
8850
8851         dpll = 0;
8852
8853         if (is_lvds)
8854                 dpll |= DPLLB_MODE_LVDS;
8855         else
8856                 dpll |= DPLLB_MODE_DAC_SERIAL;
8857
8858         dpll |= (crtc_state->pixel_multiplier - 1)
8859                 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
8860
8861         if (is_sdvo)
8862                 dpll |= DPLL_SDVO_HIGH_SPEED;
8863         if (crtc_state->has_dp_encoder)
8864                 dpll |= DPLL_SDVO_HIGH_SPEED;
8865
8866         /* compute bitmask from p1 value */
8867         dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
8868         /* also FPA1 */
8869         dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
8870
8871         switch (crtc_state->dpll.p2) {
8872         case 5:
8873                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
8874                 break;
8875         case 7:
8876                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
8877                 break;
8878         case 10:
8879                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
8880                 break;
8881         case 14:
8882                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
8883                 break;
8884         }
8885
8886         if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
8887                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
8888         else
8889                 dpll |= PLL_REF_INPUT_DREFCLK;
8890
8891         return dpll | DPLL_VCO_ENABLE;
8892 }
8893
8894 static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,
8895                                        struct intel_crtc_state *crtc_state)
8896 {
8897         struct drm_device *dev = crtc->base.dev;
8898         intel_clock_t clock, reduced_clock;
8899         u32 dpll = 0, fp = 0, fp2 = 0;
8900         bool ok, has_reduced_clock = false;
8901         bool is_lvds = false;
8902         struct intel_shared_dpll *pll;
8903
8904         memset(&crtc_state->dpll_hw_state, 0,
8905                sizeof(crtc_state->dpll_hw_state));
8906
8907         is_lvds = intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS);
8908
8909         WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
8910              "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
8911
8912         ok = ironlake_compute_clocks(&crtc->base, crtc_state, &clock,
8913                                      &has_reduced_clock, &reduced_clock);
8914         if (!ok && !crtc_state->clock_set) {
8915                 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8916                 return -EINVAL;
8917         }
8918         /* Compat-code for transition, will disappear. */
8919         if (!crtc_state->clock_set) {
8920                 crtc_state->dpll.n = clock.n;
8921                 crtc_state->dpll.m1 = clock.m1;
8922                 crtc_state->dpll.m2 = clock.m2;
8923                 crtc_state->dpll.p1 = clock.p1;
8924                 crtc_state->dpll.p2 = clock.p2;
8925         }
8926
8927         /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
8928         if (crtc_state->has_pch_encoder) {
8929                 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
8930                 if (has_reduced_clock)
8931                         fp2 = i9xx_dpll_compute_fp(&reduced_clock);
8932
8933                 dpll = ironlake_compute_dpll(crtc, crtc_state,
8934                                              &fp, &reduced_clock,
8935                                              has_reduced_clock ? &fp2 : NULL);
8936
8937                 crtc_state->dpll_hw_state.dpll = dpll;
8938                 crtc_state->dpll_hw_state.fp0 = fp;
8939                 if (has_reduced_clock)
8940                         crtc_state->dpll_hw_state.fp1 = fp2;
8941                 else
8942                         crtc_state->dpll_hw_state.fp1 = fp;
8943
8944                 pll = intel_get_shared_dpll(crtc, crtc_state);
8945                 if (pll == NULL) {
8946                         DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
8947                                          pipe_name(crtc->pipe));
8948                         return -EINVAL;
8949                 }
8950         }
8951
8952         if (is_lvds && has_reduced_clock)
8953                 crtc->lowfreq_avail = true;
8954         else
8955                 crtc->lowfreq_avail = false;
8956
8957         return 0;
8958 }
8959
8960 static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
8961                                          struct intel_link_m_n *m_n)
8962 {
8963         struct drm_device *dev = crtc->base.dev;
8964         struct drm_i915_private *dev_priv = dev->dev_private;
8965         enum pipe pipe = crtc->pipe;
8966
8967         m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe));
8968         m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe));
8969         m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe))
8970                 & ~TU_SIZE_MASK;
8971         m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe));
8972         m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe))
8973                     & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
8974 }
8975
8976 static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
8977                                          enum transcoder transcoder,
8978                                          struct intel_link_m_n *m_n,
8979                                          struct intel_link_m_n *m2_n2)
8980 {
8981         struct drm_device *dev = crtc->base.dev;
8982         struct drm_i915_private *dev_priv = dev->dev_private;
8983         enum pipe pipe = crtc->pipe;
8984
8985         if (INTEL_INFO(dev)->gen >= 5) {
8986                 m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder));
8987                 m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder));
8988                 m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
8989                         & ~TU_SIZE_MASK;
8990                 m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
8991                 m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
8992                             & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
8993                 /* Read M2_N2 registers only for gen < 8 (M2_N2 available for
8994                  * gen < 8) and if DRRS is supported (to make sure the
8995                  * registers are not unnecessarily read).
8996                  */
8997                 if (m2_n2 && INTEL_INFO(dev)->gen < 8 &&
8998                         crtc->config->has_drrs) {
8999                         m2_n2->link_m = I915_READ(PIPE_LINK_M2(transcoder));
9000                         m2_n2->link_n = I915_READ(PIPE_LINK_N2(transcoder));
9001                         m2_n2->gmch_m = I915_READ(PIPE_DATA_M2(transcoder))
9002                                         & ~TU_SIZE_MASK;
9003                         m2_n2->gmch_n = I915_READ(PIPE_DATA_N2(transcoder));
9004                         m2_n2->tu = ((I915_READ(PIPE_DATA_M2(transcoder))
9005                                         & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9006                 }
9007         } else {
9008                 m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
9009                 m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
9010                 m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe))
9011                         & ~TU_SIZE_MASK;
9012                 m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe));
9013                 m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe))
9014                             & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9015         }
9016 }
9017
9018 void intel_dp_get_m_n(struct intel_crtc *crtc,
9019                       struct intel_crtc_state *pipe_config)
9020 {
9021         if (pipe_config->has_pch_encoder)
9022                 intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
9023         else
9024                 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
9025                                              &pipe_config->dp_m_n,
9026                                              &pipe_config->dp_m2_n2);
9027 }
9028
9029 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
9030                                         struct intel_crtc_state *pipe_config)
9031 {
9032         intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
9033                                      &pipe_config->fdi_m_n, NULL);
9034 }
9035
9036 static void skylake_get_pfit_config(struct intel_crtc *crtc,
9037                                     struct intel_crtc_state *pipe_config)
9038 {
9039         struct drm_device *dev = crtc->base.dev;
9040         struct drm_i915_private *dev_priv = dev->dev_private;
9041         struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
9042         uint32_t ps_ctrl = 0;
9043         int id = -1;
9044         int i;
9045
9046         /* find scaler attached to this pipe */
9047         for (i = 0; i < crtc->num_scalers; i++) {
9048                 ps_ctrl = I915_READ(SKL_PS_CTRL(crtc->pipe, i));
9049                 if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
9050                         id = i;
9051                         pipe_config->pch_pfit.enabled = true;
9052                         pipe_config->pch_pfit.pos = I915_READ(SKL_PS_WIN_POS(crtc->pipe, i));
9053                         pipe_config->pch_pfit.size = I915_READ(SKL_PS_WIN_SZ(crtc->pipe, i));
9054                         break;
9055                 }
9056         }
9057
9058         scaler_state->scaler_id = id;
9059         if (id >= 0) {
9060                 scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
9061         } else {
9062                 scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
9063         }
9064 }
9065
9066 static void
9067 skylake_get_initial_plane_config(struct intel_crtc *crtc,
9068                                  struct intel_initial_plane_config *plane_config)
9069 {
9070         struct drm_device *dev = crtc->base.dev;
9071         struct drm_i915_private *dev_priv = dev->dev_private;
9072         u32 val, base, offset, stride_mult, tiling;
9073         int pipe = crtc->pipe;
9074         int fourcc, pixel_format;
9075         unsigned int aligned_height;
9076         struct drm_framebuffer *fb;
9077         struct intel_framebuffer *intel_fb;
9078
9079         intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
9080         if (!intel_fb) {
9081                 DRM_DEBUG_KMS("failed to alloc fb\n");
9082                 return;
9083         }
9084
9085         fb = &intel_fb->base;
9086
9087         val = I915_READ(PLANE_CTL(pipe, 0));
9088         if (!(val & PLANE_CTL_ENABLE))
9089                 goto error;
9090
9091         pixel_format = val & PLANE_CTL_FORMAT_MASK;
9092         fourcc = skl_format_to_fourcc(pixel_format,
9093                                       val & PLANE_CTL_ORDER_RGBX,
9094                                       val & PLANE_CTL_ALPHA_MASK);
9095         fb->pixel_format = fourcc;
9096         fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
9097
9098         tiling = val & PLANE_CTL_TILED_MASK;
9099         switch (tiling) {
9100         case PLANE_CTL_TILED_LINEAR:
9101                 fb->modifier[0] = DRM_FORMAT_MOD_NONE;
9102                 break;
9103         case PLANE_CTL_TILED_X:
9104                 plane_config->tiling = I915_TILING_X;
9105                 fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
9106                 break;
9107         case PLANE_CTL_TILED_Y:
9108                 fb->modifier[0] = I915_FORMAT_MOD_Y_TILED;
9109                 break;
9110         case PLANE_CTL_TILED_YF:
9111                 fb->modifier[0] = I915_FORMAT_MOD_Yf_TILED;
9112                 break;
9113         default:
9114                 MISSING_CASE(tiling);
9115                 goto error;
9116         }
9117
9118         base = I915_READ(PLANE_SURF(pipe, 0)) & 0xfffff000;
9119         plane_config->base = base;
9120
9121         offset = I915_READ(PLANE_OFFSET(pipe, 0));
9122
9123         val = I915_READ(PLANE_SIZE(pipe, 0));
9124         fb->height = ((val >> 16) & 0xfff) + 1;
9125         fb->width = ((val >> 0) & 0x1fff) + 1;
9126
9127         val = I915_READ(PLANE_STRIDE(pipe, 0));
9128         stride_mult = intel_fb_stride_alignment(dev, fb->modifier[0],
9129                                                 fb->pixel_format);
9130         fb->pitches[0] = (val & 0x3ff) * stride_mult;
9131
9132         aligned_height = intel_fb_align_height(dev, fb->height,
9133                                                fb->pixel_format,
9134                                                fb->modifier[0]);
9135
9136         plane_config->size = fb->pitches[0] * aligned_height;
9137
9138         DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
9139                       pipe_name(pipe), fb->width, fb->height,
9140                       fb->bits_per_pixel, base, fb->pitches[0],
9141                       plane_config->size);
9142
9143         plane_config->fb = intel_fb;
9144         return;
9145
9146 error:
9147         kfree(fb);
9148 }
9149
9150 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
9151                                      struct intel_crtc_state *pipe_config)
9152 {
9153         struct drm_device *dev = crtc->base.dev;
9154         struct drm_i915_private *dev_priv = dev->dev_private;
9155         uint32_t tmp;
9156
9157         tmp = I915_READ(PF_CTL(crtc->pipe));
9158
9159         if (tmp & PF_ENABLE) {
9160                 pipe_config->pch_pfit.enabled = true;
9161                 pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
9162                 pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
9163
9164                 /* We currently do not free assignements of panel fitters on
9165                  * ivb/hsw (since we don't use the higher upscaling modes which
9166                  * differentiates them) so just WARN about this case for now. */
9167                 if (IS_GEN7(dev)) {
9168                         WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
9169                                 PF_PIPE_SEL_IVB(crtc->pipe));
9170                 }
9171         }
9172 }
9173
9174 static void
9175 ironlake_get_initial_plane_config(struct intel_crtc *crtc,
9176                                   struct intel_initial_plane_config *plane_config)
9177 {
9178         struct drm_device *dev = crtc->base.dev;
9179         struct drm_i915_private *dev_priv = dev->dev_private;
9180         u32 val, base, offset;
9181         int pipe = crtc->pipe;
9182         int fourcc, pixel_format;
9183         unsigned int aligned_height;
9184         struct drm_framebuffer *fb;
9185         struct intel_framebuffer *intel_fb;
9186
9187         val = I915_READ(DSPCNTR(pipe));
9188         if (!(val & DISPLAY_PLANE_ENABLE))
9189                 return;
9190
9191         intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
9192         if (!intel_fb) {
9193                 DRM_DEBUG_KMS("failed to alloc fb\n");
9194                 return;
9195         }
9196
9197         fb = &intel_fb->base;
9198
9199         if (INTEL_INFO(dev)->gen >= 4) {
9200                 if (val & DISPPLANE_TILED) {
9201                         plane_config->tiling = I915_TILING_X;
9202                         fb->modifier[0] = I915_FORMAT_MOD_X_TILED;
9203                 }
9204         }
9205
9206         pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
9207         fourcc = i9xx_format_to_fourcc(pixel_format);
9208         fb->pixel_format = fourcc;
9209         fb->bits_per_pixel = drm_format_plane_cpp(fourcc, 0) * 8;
9210
9211         base = I915_READ(DSPSURF(pipe)) & 0xfffff000;
9212         if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
9213                 offset = I915_READ(DSPOFFSET(pipe));
9214         } else {
9215                 if (plane_config->tiling)
9216                         offset = I915_READ(DSPTILEOFF(pipe));
9217                 else
9218                         offset = I915_READ(DSPLINOFF(pipe));
9219         }
9220         plane_config->base = base;
9221
9222         val = I915_READ(PIPESRC(pipe));
9223         fb->width = ((val >> 16) & 0xfff) + 1;
9224         fb->height = ((val >> 0) & 0xfff) + 1;
9225
9226         val = I915_READ(DSPSTRIDE(pipe));
9227         fb->pitches[0] = val & 0xffffffc0;
9228
9229         aligned_height = intel_fb_align_height(dev, fb->height,
9230                                                fb->pixel_format,
9231                                                fb->modifier[0]);
9232
9233         plane_config->size = fb->pitches[0] * aligned_height;
9234
9235         DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
9236                       pipe_name(pipe), fb->width, fb->height,
9237                       fb->bits_per_pixel, base, fb->pitches[0],
9238                       plane_config->size);
9239
9240         plane_config->fb = intel_fb;
9241 }
9242
9243 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
9244                                      struct intel_crtc_state *pipe_config)
9245 {
9246         struct drm_device *dev = crtc->base.dev;
9247         struct drm_i915_private *dev_priv = dev->dev_private;
9248         uint32_t tmp;
9249
9250         if (!intel_display_power_is_enabled(dev_priv,
9251                                             POWER_DOMAIN_PIPE(crtc->pipe)))
9252                 return false;
9253
9254         pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
9255         pipe_config->shared_dpll = DPLL_ID_PRIVATE;
9256
9257         tmp = I915_READ(PIPECONF(crtc->pipe));
9258         if (!(tmp & PIPECONF_ENABLE))
9259                 return false;
9260
9261         switch (tmp & PIPECONF_BPC_MASK) {
9262         case PIPECONF_6BPC:
9263                 pipe_config->pipe_bpp = 18;
9264                 break;
9265         case PIPECONF_8BPC:
9266                 pipe_config->pipe_bpp = 24;
9267                 break;
9268         case PIPECONF_10BPC:
9269                 pipe_config->pipe_bpp = 30;
9270                 break;
9271         case PIPECONF_12BPC:
9272                 pipe_config->pipe_bpp = 36;
9273                 break;
9274         default:
9275                 break;
9276         }
9277
9278         if (tmp & PIPECONF_COLOR_RANGE_SELECT)
9279                 pipe_config->limited_color_range = true;
9280
9281         if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
9282                 struct intel_shared_dpll *pll;
9283
9284                 pipe_config->has_pch_encoder = true;
9285
9286                 tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
9287                 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
9288                                           FDI_DP_PORT_WIDTH_SHIFT) + 1;
9289
9290                 ironlake_get_fdi_m_n_config(crtc, pipe_config);
9291
9292                 if (HAS_PCH_IBX(dev_priv->dev)) {
9293                         pipe_config->shared_dpll =
9294                                 (enum intel_dpll_id) crtc->pipe;
9295                 } else {
9296                         tmp = I915_READ(PCH_DPLL_SEL);
9297                         if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
9298                                 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_B;
9299                         else
9300                                 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_A;
9301                 }
9302
9303                 pll = &dev_priv->shared_dplls[pipe_config->shared_dpll];
9304
9305                 WARN_ON(!pll->get_hw_state(dev_priv, pll,
9306                                            &pipe_config->dpll_hw_state));
9307
9308                 tmp = pipe_config->dpll_hw_state.dpll;
9309                 pipe_config->pixel_multiplier =
9310                         ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
9311                          >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
9312
9313                 ironlake_pch_clock_get(crtc, pipe_config);
9314         } else {
9315                 pipe_config->pixel_multiplier = 1;
9316         }
9317
9318         intel_get_pipe_timings(crtc, pipe_config);
9319
9320         ironlake_get_pfit_config(crtc, pipe_config);
9321
9322         return true;
9323 }
9324
9325 static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
9326 {
9327         struct drm_device *dev = dev_priv->dev;
9328         struct intel_crtc *crtc;
9329
9330         for_each_intel_crtc(dev, crtc)
9331                 I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
9332                      pipe_name(crtc->pipe));
9333
9334         I915_STATE_WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
9335         I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
9336         I915_STATE_WARN(I915_READ(WRPLL_CTL1) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
9337         I915_STATE_WARN(I915_READ(WRPLL_CTL2) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
9338         I915_STATE_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
9339         I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
9340              "CPU PWM1 enabled\n");
9341         if (IS_HASWELL(dev))
9342                 I915_STATE_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
9343                      "CPU PWM2 enabled\n");
9344         I915_STATE_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
9345              "PCH PWM1 enabled\n");
9346         I915_STATE_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
9347              "Utility pin enabled\n");
9348         I915_STATE_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
9349
9350         /*
9351          * In theory we can still leave IRQs enabled, as long as only the HPD
9352          * interrupts remain enabled. We used to check for that, but since it's
9353          * gen-specific and since we only disable LCPLL after we fully disable
9354          * the interrupts, the check below should be enough.
9355          */
9356         I915_STATE_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
9357 }
9358
9359 static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
9360 {
9361         struct drm_device *dev = dev_priv->dev;
9362
9363         if (IS_HASWELL(dev))
9364                 return I915_READ(D_COMP_HSW);
9365         else
9366                 return I915_READ(D_COMP_BDW);
9367 }
9368
9369 static void hsw_write_dcomp(struct drm_i915_private *dev_priv, uint32_t val)
9370 {
9371         struct drm_device *dev = dev_priv->dev;
9372
9373         if (IS_HASWELL(dev)) {
9374                 mutex_lock(&dev_priv->rps.hw_lock);
9375                 if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP,
9376                                             val))
9377                         DRM_ERROR("Failed to write to D_COMP\n");
9378                 mutex_unlock(&dev_priv->rps.hw_lock);
9379         } else {
9380                 I915_WRITE(D_COMP_BDW, val);
9381                 POSTING_READ(D_COMP_BDW);
9382         }
9383 }
9384
9385 /*
9386  * This function implements pieces of two sequences from BSpec:
9387  * - Sequence for display software to disable LCPLL
9388  * - Sequence for display software to allow package C8+
9389  * The steps implemented here are just the steps that actually touch the LCPLL
9390  * register. Callers should take care of disabling all the display engine
9391  * functions, doing the mode unset, fixing interrupts, etc.
9392  */
9393 static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
9394                               bool switch_to_fclk, bool allow_power_down)
9395 {
9396         uint32_t val;
9397
9398         assert_can_disable_lcpll(dev_priv);
9399
9400         val = I915_READ(LCPLL_CTL);
9401
9402         if (switch_to_fclk) {
9403                 val |= LCPLL_CD_SOURCE_FCLK;
9404                 I915_WRITE(LCPLL_CTL, val);
9405
9406                 if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
9407                                        LCPLL_CD_SOURCE_FCLK_DONE, 1))
9408                         DRM_ERROR("Switching to FCLK failed\n");
9409
9410                 val = I915_READ(LCPLL_CTL);
9411         }
9412
9413         val |= LCPLL_PLL_DISABLE;
9414         I915_WRITE(LCPLL_CTL, val);
9415         POSTING_READ(LCPLL_CTL);
9416
9417         if (wait_for((I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK) == 0, 1))
9418                 DRM_ERROR("LCPLL still locked\n");
9419
9420         val = hsw_read_dcomp(dev_priv);
9421         val |= D_COMP_COMP_DISABLE;
9422         hsw_write_dcomp(dev_priv, val);
9423         ndelay(100);
9424
9425         if (wait_for((hsw_read_dcomp(dev_priv) & D_COMP_RCOMP_IN_PROGRESS) == 0,
9426                      1))
9427                 DRM_ERROR("D_COMP RCOMP still in progress\n");
9428
9429         if (allow_power_down) {
9430                 val = I915_READ(LCPLL_CTL);
9431                 val |= LCPLL_POWER_DOWN_ALLOW;
9432                 I915_WRITE(LCPLL_CTL, val);
9433                 POSTING_READ(LCPLL_CTL);
9434         }
9435 }
9436
9437 /*
9438  * Fully restores LCPLL, disallowing power down and switching back to LCPLL
9439  * source.
9440  */
9441 static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
9442 {
9443         uint32_t val;
9444
9445         val = I915_READ(LCPLL_CTL);
9446
9447         if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
9448                     LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
9449                 return;
9450
9451         /*
9452          * Make sure we're not on PC8 state before disabling PC8, otherwise
9453          * we'll hang the machine. To prevent PC8 state, just enable force_wake.
9454          */
9455         intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
9456
9457         if (val & LCPLL_POWER_DOWN_ALLOW) {
9458                 val &= ~LCPLL_POWER_DOWN_ALLOW;
9459                 I915_WRITE(LCPLL_CTL, val);
9460                 POSTING_READ(LCPLL_CTL);
9461         }
9462
9463         val = hsw_read_dcomp(dev_priv);
9464         val |= D_COMP_COMP_FORCE;
9465         val &= ~D_COMP_COMP_DISABLE;
9466         hsw_write_dcomp(dev_priv, val);
9467
9468         val = I915_READ(LCPLL_CTL);
9469         val &= ~LCPLL_PLL_DISABLE;
9470         I915_WRITE(LCPLL_CTL, val);
9471
9472         if (wait_for(I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK, 5))
9473                 DRM_ERROR("LCPLL not locked yet\n");
9474
9475         if (val & LCPLL_CD_SOURCE_FCLK) {
9476                 val = I915_READ(LCPLL_CTL);
9477                 val &= ~LCPLL_CD_SOURCE_FCLK;
9478                 I915_WRITE(LCPLL_CTL, val);
9479
9480                 if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
9481                                         LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
9482                         DRM_ERROR("Switching back to LCPLL failed\n");
9483         }
9484
9485         intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
9486         intel_update_cdclk(dev_priv->dev);
9487 }
9488
9489 /*
9490  * Package states C8 and deeper are really deep PC states that can only be
9491  * reached when all the devices on the system allow it, so even if the graphics
9492  * device allows PC8+, it doesn't mean the system will actually get to these
9493  * states. Our driver only allows PC8+ when going into runtime PM.
9494  *
9495  * The requirements for PC8+ are that all the outputs are disabled, the power
9496  * well is disabled and most interrupts are disabled, and these are also
9497  * requirements for runtime PM. When these conditions are met, we manually do
9498  * the other conditions: disable the interrupts, clocks and switch LCPLL refclk
9499  * to Fclk. If we're in PC8+ and we get an non-hotplug interrupt, we can hard
9500  * hang the machine.
9501  *
9502  * When we really reach PC8 or deeper states (not just when we allow it) we lose
9503  * the state of some registers, so when we come back from PC8+ we need to
9504  * restore this state. We don't get into PC8+ if we're not in RC6, so we don't
9505  * need to take care of the registers kept by RC6. Notice that this happens even
9506  * if we don't put the device in PCI D3 state (which is what currently happens
9507  * because of the runtime PM support).
9508  *
9509  * For more, read "Display Sequences for Package C8" on the hardware
9510  * documentation.
9511  */
9512 void hsw_enable_pc8(struct drm_i915_private *dev_priv)
9513 {
9514         struct drm_device *dev = dev_priv->dev;
9515         uint32_t val;
9516
9517         DRM_DEBUG_KMS("Enabling package C8+\n");
9518
9519         if (HAS_PCH_LPT_LP(dev)) {
9520                 val = I915_READ(SOUTH_DSPCLK_GATE_D);
9521                 val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
9522                 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
9523         }
9524
9525         lpt_disable_clkout_dp(dev);
9526         hsw_disable_lcpll(dev_priv, true, true);
9527 }
9528
9529 void hsw_disable_pc8(struct drm_i915_private *dev_priv)
9530 {
9531         struct drm_device *dev = dev_priv->dev;
9532         uint32_t val;
9533
9534         DRM_DEBUG_KMS("Disabling package C8+\n");
9535
9536         hsw_restore_lcpll(dev_priv);
9537         lpt_init_pch_refclk(dev);
9538
9539         if (HAS_PCH_LPT_LP(dev)) {
9540                 val = I915_READ(SOUTH_DSPCLK_GATE_D);
9541                 val |= PCH_LP_PARTITION_LEVEL_DISABLE;
9542                 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
9543         }
9544
9545         intel_prepare_ddi(dev);
9546 }
9547
9548 static void broxton_modeset_commit_cdclk(struct drm_atomic_state *old_state)
9549 {
9550         struct drm_device *dev = old_state->dev;
9551         unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
9552
9553         broxton_set_cdclk(dev, req_cdclk);
9554 }
9555
9556 /* compute the max rate for new configuration */
9557 static int ilk_max_pixel_rate(struct drm_atomic_state *state)
9558 {
9559         struct intel_crtc *intel_crtc;
9560         struct intel_crtc_state *crtc_state;
9561         int max_pixel_rate = 0;
9562
9563         for_each_intel_crtc(state->dev, intel_crtc) {
9564                 int pixel_rate;
9565
9566                 crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
9567                 if (IS_ERR(crtc_state))
9568                         return PTR_ERR(crtc_state);
9569
9570                 if (!crtc_state->base.enable)
9571                         continue;
9572
9573                 pixel_rate = ilk_pipe_pixel_rate(crtc_state);
9574
9575                 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
9576                 if (IS_BROADWELL(state->dev) && crtc_state->ips_enabled)
9577                         pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
9578
9579                 max_pixel_rate = max(max_pixel_rate, pixel_rate);
9580         }
9581
9582         return max_pixel_rate;
9583 }
9584
9585 static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
9586 {
9587         struct drm_i915_private *dev_priv = dev->dev_private;
9588         uint32_t val, data;
9589         int ret;
9590
9591         if (WARN((I915_READ(LCPLL_CTL) &
9592                   (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
9593                    LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
9594                    LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
9595                    LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
9596                  "trying to change cdclk frequency with cdclk not enabled\n"))
9597                 return;
9598
9599         mutex_lock(&dev_priv->rps.hw_lock);
9600         ret = sandybridge_pcode_write(dev_priv,
9601                                       BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
9602         mutex_unlock(&dev_priv->rps.hw_lock);
9603         if (ret) {
9604                 DRM_ERROR("failed to inform pcode about cdclk change\n");
9605                 return;
9606         }
9607
9608         val = I915_READ(LCPLL_CTL);
9609         val |= LCPLL_CD_SOURCE_FCLK;
9610         I915_WRITE(LCPLL_CTL, val);
9611
9612         if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
9613                                LCPLL_CD_SOURCE_FCLK_DONE, 1))
9614                 DRM_ERROR("Switching to FCLK failed\n");
9615
9616         val = I915_READ(LCPLL_CTL);
9617         val &= ~LCPLL_CLK_FREQ_MASK;
9618
9619         switch (cdclk) {
9620         case 450000:
9621                 val |= LCPLL_CLK_FREQ_450;
9622                 data = 0;
9623                 break;
9624         case 540000:
9625                 val |= LCPLL_CLK_FREQ_54O_BDW;
9626                 data = 1;
9627                 break;
9628         case 337500:
9629                 val |= LCPLL_CLK_FREQ_337_5_BDW;
9630                 data = 2;
9631                 break;
9632         case 675000:
9633                 val |= LCPLL_CLK_FREQ_675_BDW;
9634                 data = 3;
9635                 break;
9636         default:
9637                 WARN(1, "invalid cdclk frequency\n");
9638                 return;
9639         }
9640
9641         I915_WRITE(LCPLL_CTL, val);
9642
9643         val = I915_READ(LCPLL_CTL);
9644         val &= ~LCPLL_CD_SOURCE_FCLK;
9645         I915_WRITE(LCPLL_CTL, val);
9646
9647         if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
9648                                 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
9649                 DRM_ERROR("Switching back to LCPLL failed\n");
9650
9651         mutex_lock(&dev_priv->rps.hw_lock);
9652         sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
9653         mutex_unlock(&dev_priv->rps.hw_lock);
9654
9655         intel_update_cdclk(dev);
9656
9657         WARN(cdclk != dev_priv->cdclk_freq,
9658              "cdclk requested %d kHz but got %d kHz\n",
9659              cdclk, dev_priv->cdclk_freq);
9660 }
9661
9662 static int broadwell_modeset_calc_cdclk(struct drm_atomic_state *state)
9663 {
9664         struct drm_i915_private *dev_priv = to_i915(state->dev);
9665         int max_pixclk = ilk_max_pixel_rate(state);
9666         int cdclk;
9667
9668         /*
9669          * FIXME should also account for plane ratio
9670          * once 64bpp pixel formats are supported.
9671          */
9672         if (max_pixclk > 540000)
9673                 cdclk = 675000;
9674         else if (max_pixclk > 450000)
9675                 cdclk = 540000;
9676         else if (max_pixclk > 337500)
9677                 cdclk = 450000;
9678         else
9679                 cdclk = 337500;
9680
9681         /*
9682          * FIXME move the cdclk caclulation to
9683          * compute_config() so we can fail gracegully.
9684          */
9685         if (cdclk > dev_priv->max_cdclk_freq) {
9686                 DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
9687                           cdclk, dev_priv->max_cdclk_freq);
9688                 cdclk = dev_priv->max_cdclk_freq;
9689         }
9690
9691         to_intel_atomic_state(state)->cdclk = cdclk;
9692
9693         return 0;
9694 }
9695
9696 static void broadwell_modeset_commit_cdclk(struct drm_atomic_state *old_state)
9697 {
9698         struct drm_device *dev = old_state->dev;
9699         unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
9700
9701         broadwell_set_cdclk(dev, req_cdclk);
9702 }
9703
9704 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
9705                                       struct intel_crtc_state *crtc_state)
9706 {
9707         if (!intel_ddi_pll_select(crtc, crtc_state))
9708                 return -EINVAL;
9709
9710         crtc->lowfreq_avail = false;
9711
9712         return 0;
9713 }
9714
9715 static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,
9716                                 enum port port,
9717                                 struct intel_crtc_state *pipe_config)
9718 {
9719         switch (port) {
9720         case PORT_A:
9721                 pipe_config->ddi_pll_sel = SKL_DPLL0;
9722                 pipe_config->shared_dpll = DPLL_ID_SKL_DPLL1;
9723                 break;
9724         case PORT_B:
9725                 pipe_config->ddi_pll_sel = SKL_DPLL1;
9726                 pipe_config->shared_dpll = DPLL_ID_SKL_DPLL2;
9727                 break;
9728         case PORT_C:
9729                 pipe_config->ddi_pll_sel = SKL_DPLL2;
9730                 pipe_config->shared_dpll = DPLL_ID_SKL_DPLL3;
9731                 break;
9732         default:
9733                 DRM_ERROR("Incorrect port type\n");
9734         }
9735 }
9736
9737 static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv,
9738                                 enum port port,
9739                                 struct intel_crtc_state *pipe_config)
9740 {
9741         u32 temp, dpll_ctl1;
9742
9743         temp = I915_READ(DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
9744         pipe_config->ddi_pll_sel = temp >> (port * 3 + 1);
9745
9746         switch (pipe_config->ddi_pll_sel) {
9747         case SKL_DPLL0:
9748                 /*
9749                  * On SKL the eDP DPLL (DPLL0 as we don't use SSC) is not part
9750                  * of the shared DPLL framework and thus needs to be read out
9751                  * separately
9752                  */
9753                 dpll_ctl1 = I915_READ(DPLL_CTRL1);
9754                 pipe_config->dpll_hw_state.ctrl1 = dpll_ctl1 & 0x3f;
9755                 break;
9756         case SKL_DPLL1:
9757                 pipe_config->shared_dpll = DPLL_ID_SKL_DPLL1;
9758                 break;
9759         case SKL_DPLL2:
9760                 pipe_config->shared_dpll = DPLL_ID_SKL_DPLL2;
9761                 break;
9762         case SKL_DPLL3:
9763                 pipe_config->shared_dpll = DPLL_ID_SKL_DPLL3;
9764                 break;
9765         }
9766 }
9767
9768 static void haswell_get_ddi_pll(struct drm_i915_private *dev_priv,
9769                                 enum port port,
9770                                 struct intel_crtc_state *pipe_config)
9771 {
9772         pipe_config->ddi_pll_sel = I915_READ(PORT_CLK_SEL(port));
9773
9774         switch (pipe_config->ddi_pll_sel) {
9775         case PORT_CLK_SEL_WRPLL1:
9776                 pipe_config->shared_dpll = DPLL_ID_WRPLL1;
9777                 break;
9778         case PORT_CLK_SEL_WRPLL2:
9779                 pipe_config->shared_dpll = DPLL_ID_WRPLL2;
9780                 break;
9781         case PORT_CLK_SEL_SPLL:
9782                 pipe_config->shared_dpll = DPLL_ID_SPLL;
9783         }
9784 }
9785
9786 static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
9787                                        struct intel_crtc_state *pipe_config)
9788 {
9789         struct drm_device *dev = crtc->base.dev;
9790         struct drm_i915_private *dev_priv = dev->dev_private;
9791         struct intel_shared_dpll *pll;
9792         enum port port;
9793         uint32_t tmp;
9794
9795         tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
9796
9797         port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
9798
9799         if (IS_SKYLAKE(dev))
9800                 skylake_get_ddi_pll(dev_priv, port, pipe_config);
9801         else if (IS_BROXTON(dev))
9802                 bxt_get_ddi_pll(dev_priv, port, pipe_config);
9803         else
9804                 haswell_get_ddi_pll(dev_priv, port, pipe_config);
9805
9806         if (pipe_config->shared_dpll >= 0) {
9807                 pll = &dev_priv->shared_dplls[pipe_config->shared_dpll];
9808
9809                 WARN_ON(!pll->get_hw_state(dev_priv, pll,
9810                                            &pipe_config->dpll_hw_state));
9811         }
9812
9813         /*
9814          * Haswell has only FDI/PCH transcoder A. It is which is connected to
9815          * DDI E. So just check whether this pipe is wired to DDI E and whether
9816          * the PCH transcoder is on.
9817          */
9818         if (INTEL_INFO(dev)->gen < 9 &&
9819             (port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
9820                 pipe_config->has_pch_encoder = true;
9821
9822                 tmp = I915_READ(FDI_RX_CTL(PIPE_A));
9823                 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
9824                                           FDI_DP_PORT_WIDTH_SHIFT) + 1;
9825
9826                 ironlake_get_fdi_m_n_config(crtc, pipe_config);
9827         }
9828 }
9829
9830 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
9831                                     struct intel_crtc_state *pipe_config)
9832 {
9833         struct drm_device *dev = crtc->base.dev;
9834         struct drm_i915_private *dev_priv = dev->dev_private;
9835         enum intel_display_power_domain pfit_domain;
9836         uint32_t tmp;
9837
9838         if (!intel_display_power_is_enabled(dev_priv,
9839                                          POWER_DOMAIN_PIPE(crtc->pipe)))
9840                 return false;
9841
9842         pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
9843         pipe_config->shared_dpll = DPLL_ID_PRIVATE;
9844
9845         tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
9846         if (tmp & TRANS_DDI_FUNC_ENABLE) {
9847                 enum pipe trans_edp_pipe;
9848                 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
9849                 default:
9850                         WARN(1, "unknown pipe linked to edp transcoder\n");
9851                 case TRANS_DDI_EDP_INPUT_A_ONOFF:
9852                 case TRANS_DDI_EDP_INPUT_A_ON:
9853                         trans_edp_pipe = PIPE_A;
9854                         break;
9855                 case TRANS_DDI_EDP_INPUT_B_ONOFF:
9856                         trans_edp_pipe = PIPE_B;
9857                         break;
9858                 case TRANS_DDI_EDP_INPUT_C_ONOFF:
9859                         trans_edp_pipe = PIPE_C;
9860                         break;
9861                 }
9862
9863                 if (trans_edp_pipe == crtc->pipe)
9864                         pipe_config->cpu_transcoder = TRANSCODER_EDP;
9865         }
9866
9867         if (!intel_display_power_is_enabled(dev_priv,
9868                         POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder)))
9869                 return false;
9870
9871         tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
9872         if (!(tmp & PIPECONF_ENABLE))
9873                 return false;
9874
9875         haswell_get_ddi_port_state(crtc, pipe_config);
9876
9877         intel_get_pipe_timings(crtc, pipe_config);
9878
9879         if (INTEL_INFO(dev)->gen >= 9) {
9880                 skl_init_scalers(dev, crtc, pipe_config);
9881         }
9882
9883         pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
9884
9885         if (INTEL_INFO(dev)->gen >= 9) {
9886                 pipe_config->scaler_state.scaler_id = -1;
9887                 pipe_config->scaler_state.scaler_users &= ~(1 << SKL_CRTC_INDEX);
9888         }
9889
9890         if (intel_display_power_is_enabled(dev_priv, pfit_domain)) {
9891                 if (INTEL_INFO(dev)->gen >= 9)
9892                         skylake_get_pfit_config(crtc, pipe_config);
9893                 else
9894                         ironlake_get_pfit_config(crtc, pipe_config);
9895         }
9896
9897         if (IS_HASWELL(dev))
9898                 pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
9899                         (I915_READ(IPS_CTL) & IPS_ENABLE);
9900
9901         if (pipe_config->cpu_transcoder != TRANSCODER_EDP) {
9902                 pipe_config->pixel_multiplier =
9903                         I915_READ(PIPE_MULT(pipe_config->cpu_transcoder)) + 1;
9904         } else {
9905                 pipe_config->pixel_multiplier = 1;
9906         }
9907
9908         return true;
9909 }
9910
9911 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
9912 {
9913         struct drm_device *dev = crtc->dev;
9914         struct drm_i915_private *dev_priv = dev->dev_private;
9915         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9916         uint32_t cntl = 0, size = 0;
9917
9918         if (base) {
9919                 unsigned int width = intel_crtc->base.cursor->state->crtc_w;
9920                 unsigned int height = intel_crtc->base.cursor->state->crtc_h;
9921                 unsigned int stride = roundup_pow_of_two(width) * 4;
9922
9923                 switch (stride) {
9924                 default:
9925                         WARN_ONCE(1, "Invalid cursor width/stride, width=%u, stride=%u\n",
9926                                   width, stride);
9927                         stride = 256;
9928                         /* fallthrough */
9929                 case 256:
9930                 case 512:
9931                 case 1024:
9932                 case 2048:
9933                         break;
9934                 }
9935
9936                 cntl |= CURSOR_ENABLE |
9937                         CURSOR_GAMMA_ENABLE |
9938                         CURSOR_FORMAT_ARGB |
9939                         CURSOR_STRIDE(stride);
9940
9941                 size = (height << 12) | width;
9942         }
9943
9944         if (intel_crtc->cursor_cntl != 0 &&
9945             (intel_crtc->cursor_base != base ||
9946              intel_crtc->cursor_size != size ||
9947              intel_crtc->cursor_cntl != cntl)) {
9948                 /* On these chipsets we can only modify the base/size/stride
9949                  * whilst the cursor is disabled.
9950                  */
9951                 I915_WRITE(CURCNTR(PIPE_A), 0);
9952                 POSTING_READ(CURCNTR(PIPE_A));
9953                 intel_crtc->cursor_cntl = 0;
9954         }
9955
9956         if (intel_crtc->cursor_base != base) {
9957                 I915_WRITE(CURBASE(PIPE_A), base);
9958                 intel_crtc->cursor_base = base;
9959         }
9960
9961         if (intel_crtc->cursor_size != size) {
9962                 I915_WRITE(CURSIZE, size);
9963                 intel_crtc->cursor_size = size;
9964         }
9965
9966         if (intel_crtc->cursor_cntl != cntl) {
9967                 I915_WRITE(CURCNTR(PIPE_A), cntl);
9968                 POSTING_READ(CURCNTR(PIPE_A));
9969                 intel_crtc->cursor_cntl = cntl;
9970         }
9971 }
9972
9973 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
9974 {
9975         struct drm_device *dev = crtc->dev;
9976         struct drm_i915_private *dev_priv = dev->dev_private;
9977         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9978         int pipe = intel_crtc->pipe;
9979         uint32_t cntl;
9980
9981         cntl = 0;
9982         if (base) {
9983                 cntl = MCURSOR_GAMMA_ENABLE;
9984                 switch (intel_crtc->base.cursor->state->crtc_w) {
9985                         case 64:
9986                                 cntl |= CURSOR_MODE_64_ARGB_AX;
9987                                 break;
9988                         case 128:
9989                                 cntl |= CURSOR_MODE_128_ARGB_AX;
9990                                 break;
9991                         case 256:
9992                                 cntl |= CURSOR_MODE_256_ARGB_AX;
9993                                 break;
9994                         default:
9995                                 MISSING_CASE(intel_crtc->base.cursor->state->crtc_w);
9996                                 return;
9997                 }
9998                 cntl |= pipe << 28; /* Connect to correct pipe */
9999
10000                 if (HAS_DDI(dev))
10001                         cntl |= CURSOR_PIPE_CSC_ENABLE;
10002         }
10003
10004         if (crtc->cursor->state->rotation == BIT(DRM_ROTATE_180))
10005                 cntl |= CURSOR_ROTATE_180;
10006
10007         if (intel_crtc->cursor_cntl != cntl) {
10008                 I915_WRITE(CURCNTR(pipe), cntl);
10009                 POSTING_READ(CURCNTR(pipe));
10010                 intel_crtc->cursor_cntl = cntl;
10011         }
10012
10013         /* and commit changes on next vblank */
10014         I915_WRITE(CURBASE(pipe), base);
10015         POSTING_READ(CURBASE(pipe));
10016
10017         intel_crtc->cursor_base = base;
10018 }
10019
10020 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
10021 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
10022                                      bool on)
10023 {
10024         struct drm_device *dev = crtc->dev;
10025         struct drm_i915_private *dev_priv = dev->dev_private;
10026         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10027         int pipe = intel_crtc->pipe;
10028         struct drm_plane_state *cursor_state = crtc->cursor->state;
10029         int x = cursor_state->crtc_x;
10030         int y = cursor_state->crtc_y;
10031         u32 base = 0, pos = 0;
10032
10033         if (on)
10034                 base = intel_crtc->cursor_addr;
10035
10036         if (x >= intel_crtc->config->pipe_src_w)
10037                 base = 0;
10038
10039         if (y >= intel_crtc->config->pipe_src_h)
10040                 base = 0;
10041
10042         if (x < 0) {
10043                 if (x + cursor_state->crtc_w <= 0)
10044                         base = 0;
10045
10046                 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
10047                 x = -x;
10048         }
10049         pos |= x << CURSOR_X_SHIFT;
10050
10051         if (y < 0) {
10052                 if (y + cursor_state->crtc_h <= 0)
10053                         base = 0;
10054
10055                 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
10056                 y = -y;
10057         }
10058         pos |= y << CURSOR_Y_SHIFT;
10059
10060         if (base == 0 && intel_crtc->cursor_base == 0)
10061                 return;
10062
10063         I915_WRITE(CURPOS(pipe), pos);
10064
10065         /* ILK+ do this automagically */
10066         if (HAS_GMCH_DISPLAY(dev) &&
10067             crtc->cursor->state->rotation == BIT(DRM_ROTATE_180)) {
10068                 base += (cursor_state->crtc_h *
10069                          cursor_state->crtc_w - 1) * 4;
10070         }
10071
10072         if (IS_845G(dev) || IS_I865G(dev))
10073                 i845_update_cursor(crtc, base);
10074         else
10075                 i9xx_update_cursor(crtc, base);
10076 }
10077
10078 static bool cursor_size_ok(struct drm_device *dev,
10079                            uint32_t width, uint32_t height)
10080 {
10081         if (width == 0 || height == 0)
10082                 return false;
10083
10084         /*
10085          * 845g/865g are special in that they are only limited by
10086          * the width of their cursors, the height is arbitrary up to
10087          * the precision of the register. Everything else requires
10088          * square cursors, limited to a few power-of-two sizes.
10089          */
10090         if (IS_845G(dev) || IS_I865G(dev)) {
10091                 if ((width & 63) != 0)
10092                         return false;
10093
10094                 if (width > (IS_845G(dev) ? 64 : 512))
10095                         return false;
10096
10097                 if (height > 1023)
10098                         return false;
10099         } else {
10100                 switch (width | height) {
10101                 case 256:
10102                 case 128:
10103                         if (IS_GEN2(dev))
10104                                 return false;
10105                 case 64:
10106                         break;
10107                 default:
10108                         return false;
10109                 }
10110         }
10111
10112         return true;
10113 }
10114
10115 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
10116                                  u16 *blue, uint32_t start, uint32_t size)
10117 {
10118         int end = (start + size > 256) ? 256 : start + size, i;
10119         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10120
10121         for (i = start; i < end; i++) {
10122                 intel_crtc->lut_r[i] = red[i] >> 8;
10123                 intel_crtc->lut_g[i] = green[i] >> 8;
10124                 intel_crtc->lut_b[i] = blue[i] >> 8;
10125         }
10126
10127         intel_crtc_load_lut(crtc);
10128 }
10129
10130 /* VESA 640x480x72Hz mode to set on the pipe */
10131 static struct drm_display_mode load_detect_mode = {
10132         DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
10133                  704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
10134 };
10135
10136 struct drm_framebuffer *
10137 __intel_framebuffer_create(struct drm_device *dev,
10138                            struct drm_mode_fb_cmd2 *mode_cmd,
10139                            struct drm_i915_gem_object *obj)
10140 {
10141         struct intel_framebuffer *intel_fb;
10142         int ret;
10143
10144         intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
10145         if (!intel_fb) {
10146                 drm_gem_object_unreference(&obj->base);
10147                 return ERR_PTR(-ENOMEM);
10148         }
10149
10150         ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
10151         if (ret)
10152                 goto err;
10153
10154         return &intel_fb->base;
10155 err:
10156         drm_gem_object_unreference(&obj->base);
10157         kfree(intel_fb);
10158
10159         return ERR_PTR(ret);
10160 }
10161
10162 static struct drm_framebuffer *
10163 intel_framebuffer_create(struct drm_device *dev,
10164                          struct drm_mode_fb_cmd2 *mode_cmd,
10165                          struct drm_i915_gem_object *obj)
10166 {
10167         struct drm_framebuffer *fb;
10168         int ret;
10169
10170         ret = i915_mutex_lock_interruptible(dev);
10171         if (ret)
10172                 return ERR_PTR(ret);
10173         fb = __intel_framebuffer_create(dev, mode_cmd, obj);
10174         mutex_unlock(&dev->struct_mutex);
10175
10176         return fb;
10177 }
10178
10179 static u32
10180 intel_framebuffer_pitch_for_width(int width, int bpp)
10181 {
10182         u32 pitch = DIV_ROUND_UP(width * bpp, 8);
10183         return ALIGN(pitch, 64);
10184 }
10185
10186 static u32
10187 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
10188 {
10189         u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
10190         return PAGE_ALIGN(pitch * mode->vdisplay);
10191 }
10192
10193 static struct drm_framebuffer *
10194 intel_framebuffer_create_for_mode(struct drm_device *dev,
10195                                   struct drm_display_mode *mode,
10196                                   int depth, int bpp)
10197 {
10198         struct drm_i915_gem_object *obj;
10199         struct drm_mode_fb_cmd2 mode_cmd = { 0 };
10200
10201         obj = i915_gem_alloc_object(dev,
10202                                     intel_framebuffer_size_for_mode(mode, bpp));
10203         if (obj == NULL)
10204                 return ERR_PTR(-ENOMEM);
10205
10206         mode_cmd.width = mode->hdisplay;
10207         mode_cmd.height = mode->vdisplay;
10208         mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
10209                                                                 bpp);
10210         mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
10211
10212         return intel_framebuffer_create(dev, &mode_cmd, obj);
10213 }
10214
10215 static struct drm_framebuffer *
10216 mode_fits_in_fbdev(struct drm_device *dev,
10217                    struct drm_display_mode *mode)
10218 {
10219 #ifdef CONFIG_DRM_FBDEV_EMULATION
10220         struct drm_i915_private *dev_priv = dev->dev_private;
10221         struct drm_i915_gem_object *obj;
10222         struct drm_framebuffer *fb;
10223
10224         if (!dev_priv->fbdev)
10225                 return NULL;
10226
10227         if (!dev_priv->fbdev->fb)
10228                 return NULL;
10229
10230         obj = dev_priv->fbdev->fb->obj;
10231         BUG_ON(!obj);
10232
10233         fb = &dev_priv->fbdev->fb->base;
10234         if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
10235                                                                fb->bits_per_pixel))
10236                 return NULL;
10237
10238         if (obj->base.size < mode->vdisplay * fb->pitches[0])
10239                 return NULL;
10240
10241         return fb;
10242 #else
10243         return NULL;
10244 #endif
10245 }
10246
10247 static int intel_modeset_setup_plane_state(struct drm_atomic_state *state,
10248                                            struct drm_crtc *crtc,
10249                                            struct drm_display_mode *mode,
10250                                            struct drm_framebuffer *fb,
10251                                            int x, int y)
10252 {
10253         struct drm_plane_state *plane_state;
10254         int hdisplay, vdisplay;
10255         int ret;
10256
10257         plane_state = drm_atomic_get_plane_state(state, crtc->primary);
10258         if (IS_ERR(plane_state))
10259                 return PTR_ERR(plane_state);
10260
10261         if (mode)
10262                 drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
10263         else
10264                 hdisplay = vdisplay = 0;
10265
10266         ret = drm_atomic_set_crtc_for_plane(plane_state, fb ? crtc : NULL);
10267         if (ret)
10268                 return ret;
10269         drm_atomic_set_fb_for_plane(plane_state, fb);
10270         plane_state->crtc_x = 0;
10271         plane_state->crtc_y = 0;
10272         plane_state->crtc_w = hdisplay;
10273         plane_state->crtc_h = vdisplay;
10274         plane_state->src_x = x << 16;
10275         plane_state->src_y = y << 16;
10276         plane_state->src_w = hdisplay << 16;
10277         plane_state->src_h = vdisplay << 16;
10278
10279         return 0;
10280 }
10281
10282 bool intel_get_load_detect_pipe(struct drm_connector *connector,
10283                                 struct drm_display_mode *mode,
10284                                 struct intel_load_detect_pipe *old,
10285                                 struct drm_modeset_acquire_ctx *ctx)
10286 {
10287         struct intel_crtc *intel_crtc;
10288         struct intel_encoder *intel_encoder =
10289                 intel_attached_encoder(connector);
10290         struct drm_crtc *possible_crtc;
10291         struct drm_encoder *encoder = &intel_encoder->base;
10292         struct drm_crtc *crtc = NULL;
10293         struct drm_device *dev = encoder->dev;
10294         struct drm_framebuffer *fb;
10295         struct drm_mode_config *config = &dev->mode_config;
10296         struct drm_atomic_state *state = NULL;
10297         struct drm_connector_state *connector_state;
10298         struct intel_crtc_state *crtc_state;
10299         int ret, i = -1;
10300
10301         DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
10302                       connector->base.id, connector->name,
10303                       encoder->base.id, encoder->name);
10304
10305 retry:
10306         ret = drm_modeset_lock(&config->connection_mutex, ctx);
10307         if (ret)
10308                 goto fail;
10309
10310         /*
10311          * Algorithm gets a little messy:
10312          *
10313          *   - if the connector already has an assigned crtc, use it (but make
10314          *     sure it's on first)
10315          *
10316          *   - try to find the first unused crtc that can drive this connector,
10317          *     and use that if we find one
10318          */
10319
10320         /* See if we already have a CRTC for this connector */
10321         if (encoder->crtc) {
10322                 crtc = encoder->crtc;
10323
10324                 ret = drm_modeset_lock(&crtc->mutex, ctx);
10325                 if (ret)
10326                         goto fail;
10327                 ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
10328                 if (ret)
10329                         goto fail;
10330
10331                 old->dpms_mode = connector->dpms;
10332                 old->load_detect_temp = false;
10333
10334                 /* Make sure the crtc and connector are running */
10335                 if (connector->dpms != DRM_MODE_DPMS_ON)
10336                         connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
10337
10338                 return true;
10339         }
10340
10341         /* Find an unused one (if possible) */
10342         for_each_crtc(dev, possible_crtc) {
10343                 i++;
10344                 if (!(encoder->possible_crtcs & (1 << i)))
10345                         continue;
10346                 if (possible_crtc->state->enable)
10347                         continue;
10348
10349                 crtc = possible_crtc;
10350                 break;
10351         }
10352
10353         /*
10354          * If we didn't find an unused CRTC, don't use any.
10355          */
10356         if (!crtc) {
10357                 DRM_DEBUG_KMS("no pipe available for load-detect\n");
10358                 goto fail;
10359         }
10360
10361         ret = drm_modeset_lock(&crtc->mutex, ctx);
10362         if (ret)
10363                 goto fail;
10364         ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
10365         if (ret)
10366                 goto fail;
10367
10368         intel_crtc = to_intel_crtc(crtc);
10369         old->dpms_mode = connector->dpms;
10370         old->load_detect_temp = true;
10371         old->release_fb = NULL;
10372
10373         state = drm_atomic_state_alloc(dev);
10374         if (!state)
10375                 return false;
10376
10377         state->acquire_ctx = ctx;
10378
10379         connector_state = drm_atomic_get_connector_state(state, connector);
10380         if (IS_ERR(connector_state)) {
10381                 ret = PTR_ERR(connector_state);
10382                 goto fail;
10383         }
10384
10385         connector_state->crtc = crtc;
10386         connector_state->best_encoder = &intel_encoder->base;
10387
10388         crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
10389         if (IS_ERR(crtc_state)) {
10390                 ret = PTR_ERR(crtc_state);
10391                 goto fail;
10392         }
10393
10394         crtc_state->base.active = crtc_state->base.enable = true;
10395
10396         if (!mode)
10397                 mode = &load_detect_mode;
10398
10399         /* We need a framebuffer large enough to accommodate all accesses
10400          * that the plane may generate whilst we perform load detection.
10401          * We can not rely on the fbcon either being present (we get called
10402          * during its initialisation to detect all boot displays, or it may
10403          * not even exist) or that it is large enough to satisfy the
10404          * requested mode.
10405          */
10406         fb = mode_fits_in_fbdev(dev, mode);
10407         if (fb == NULL) {
10408                 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
10409                 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
10410                 old->release_fb = fb;
10411         } else
10412                 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
10413         if (IS_ERR(fb)) {
10414                 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
10415                 goto fail;
10416         }
10417
10418         ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0);
10419         if (ret)
10420                 goto fail;
10421
10422         drm_mode_copy(&crtc_state->base.mode, mode);
10423
10424         if (drm_atomic_commit(state)) {
10425                 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
10426                 if (old->release_fb)
10427                         old->release_fb->funcs->destroy(old->release_fb);
10428                 goto fail;
10429         }
10430         crtc->primary->crtc = crtc;
10431
10432         /* let the connector get through one full cycle before testing */
10433         intel_wait_for_vblank(dev, intel_crtc->pipe);
10434         return true;
10435
10436 fail:
10437         drm_atomic_state_free(state);
10438         state = NULL;
10439
10440         if (ret == -EDEADLK) {
10441                 drm_modeset_backoff(ctx);
10442                 goto retry;
10443         }
10444
10445         return false;
10446 }
10447
10448 void intel_release_load_detect_pipe(struct drm_connector *connector,
10449                                     struct intel_load_detect_pipe *old,
10450                                     struct drm_modeset_acquire_ctx *ctx)
10451 {
10452         struct drm_device *dev = connector->dev;
10453         struct intel_encoder *intel_encoder =
10454                 intel_attached_encoder(connector);
10455         struct drm_encoder *encoder = &intel_encoder->base;
10456         struct drm_crtc *crtc = encoder->crtc;
10457         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10458         struct drm_atomic_state *state;
10459         struct drm_connector_state *connector_state;
10460         struct intel_crtc_state *crtc_state;
10461         int ret;
10462
10463         DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
10464                       connector->base.id, connector->name,
10465                       encoder->base.id, encoder->name);
10466
10467         if (old->load_detect_temp) {
10468                 state = drm_atomic_state_alloc(dev);
10469                 if (!state)
10470                         goto fail;
10471
10472                 state->acquire_ctx = ctx;
10473
10474                 connector_state = drm_atomic_get_connector_state(state, connector);
10475                 if (IS_ERR(connector_state))
10476                         goto fail;
10477
10478                 crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
10479                 if (IS_ERR(crtc_state))
10480                         goto fail;
10481
10482                 connector_state->best_encoder = NULL;
10483                 connector_state->crtc = NULL;
10484
10485                 crtc_state->base.enable = crtc_state->base.active = false;
10486
10487                 ret = intel_modeset_setup_plane_state(state, crtc, NULL, NULL,
10488                                                       0, 0);
10489                 if (ret)
10490                         goto fail;
10491
10492                 ret = drm_atomic_commit(state);
10493                 if (ret)
10494                         goto fail;
10495
10496                 if (old->release_fb) {
10497                         drm_framebuffer_unregister_private(old->release_fb);
10498                         drm_framebuffer_unreference(old->release_fb);
10499                 }
10500
10501                 return;
10502         }
10503
10504         /* Switch crtc and encoder back off if necessary */
10505         if (old->dpms_mode != DRM_MODE_DPMS_ON)
10506                 connector->funcs->dpms(connector, old->dpms_mode);
10507
10508         return;
10509 fail:
10510         DRM_DEBUG_KMS("Couldn't release load detect pipe.\n");
10511         drm_atomic_state_free(state);
10512 }
10513
10514 static int i9xx_pll_refclk(struct drm_device *dev,
10515                            const struct intel_crtc_state *pipe_config)
10516 {
10517         struct drm_i915_private *dev_priv = dev->dev_private;
10518         u32 dpll = pipe_config->dpll_hw_state.dpll;
10519
10520         if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
10521                 return dev_priv->vbt.lvds_ssc_freq;
10522         else if (HAS_PCH_SPLIT(dev))
10523                 return 120000;
10524         else if (!IS_GEN2(dev))
10525                 return 96000;
10526         else
10527                 return 48000;
10528 }
10529
10530 /* Returns the clock of the currently programmed mode of the given pipe. */
10531 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
10532                                 struct intel_crtc_state *pipe_config)
10533 {
10534         struct drm_device *dev = crtc->base.dev;
10535         struct drm_i915_private *dev_priv = dev->dev_private;
10536         int pipe = pipe_config->cpu_transcoder;
10537         u32 dpll = pipe_config->dpll_hw_state.dpll;
10538         u32 fp;
10539         intel_clock_t clock;
10540         int port_clock;
10541         int refclk = i9xx_pll_refclk(dev, pipe_config);
10542
10543         if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
10544                 fp = pipe_config->dpll_hw_state.fp0;
10545         else
10546                 fp = pipe_config->dpll_hw_state.fp1;
10547
10548         clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
10549         if (IS_PINEVIEW(dev)) {
10550                 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
10551                 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
10552         } else {
10553                 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
10554                 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
10555         }
10556
10557         if (!IS_GEN2(dev)) {
10558                 if (IS_PINEVIEW(dev))
10559                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
10560                                 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
10561                 else
10562                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
10563                                DPLL_FPA01_P1_POST_DIV_SHIFT);
10564
10565                 switch (dpll & DPLL_MODE_MASK) {
10566                 case DPLLB_MODE_DAC_SERIAL:
10567                         clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
10568                                 5 : 10;
10569                         break;
10570                 case DPLLB_MODE_LVDS:
10571                         clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
10572                                 7 : 14;
10573                         break;
10574                 default:
10575                         DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
10576                                   "mode\n", (int)(dpll & DPLL_MODE_MASK));
10577                         return;
10578                 }
10579
10580                 if (IS_PINEVIEW(dev))
10581                         port_clock = pnv_calc_dpll_params(refclk, &clock);
10582                 else
10583                         port_clock = i9xx_calc_dpll_params(refclk, &clock);
10584         } else {
10585                 u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
10586                 bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
10587
10588                 if (is_lvds) {
10589                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
10590                                        DPLL_FPA01_P1_POST_DIV_SHIFT);
10591
10592                         if (lvds & LVDS_CLKB_POWER_UP)
10593                                 clock.p2 = 7;
10594                         else
10595                                 clock.p2 = 14;
10596                 } else {
10597                         if (dpll & PLL_P1_DIVIDE_BY_TWO)
10598                                 clock.p1 = 2;
10599                         else {
10600                                 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
10601                                             DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
10602                         }
10603                         if (dpll & PLL_P2_DIVIDE_BY_4)
10604                                 clock.p2 = 4;
10605                         else
10606                                 clock.p2 = 2;
10607                 }
10608
10609                 port_clock = i9xx_calc_dpll_params(refclk, &clock);
10610         }
10611
10612         /*
10613          * This value includes pixel_multiplier. We will use
10614          * port_clock to compute adjusted_mode.crtc_clock in the
10615          * encoder's get_config() function.
10616          */
10617         pipe_config->port_clock = port_clock;
10618 }
10619
10620 int intel_dotclock_calculate(int link_freq,
10621                              const struct intel_link_m_n *m_n)
10622 {
10623         /*
10624          * The calculation for the data clock is:
10625          * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
10626          * But we want to avoid losing precison if possible, so:
10627          * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
10628          *
10629          * and the link clock is simpler:
10630          * link_clock = (m * link_clock) / n
10631          */
10632
10633         if (!m_n->link_n)
10634                 return 0;
10635
10636         return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
10637 }
10638
10639 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
10640                                    struct intel_crtc_state *pipe_config)
10641 {
10642         struct drm_device *dev = crtc->base.dev;
10643
10644         /* read out port_clock from the DPLL */
10645         i9xx_crtc_clock_get(crtc, pipe_config);
10646
10647         /*
10648          * This value does not include pixel_multiplier.
10649          * We will check that port_clock and adjusted_mode.crtc_clock
10650          * agree once we know their relationship in the encoder's
10651          * get_config() function.
10652          */
10653         pipe_config->base.adjusted_mode.crtc_clock =
10654                 intel_dotclock_calculate(intel_fdi_link_freq(dev) * 10000,
10655                                          &pipe_config->fdi_m_n);
10656 }
10657
10658 /** Returns the currently programmed mode of the given pipe. */
10659 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
10660                                              struct drm_crtc *crtc)
10661 {
10662         struct drm_i915_private *dev_priv = dev->dev_private;
10663         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10664         enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
10665         struct drm_display_mode *mode;
10666         struct intel_crtc_state pipe_config;
10667         int htot = I915_READ(HTOTAL(cpu_transcoder));
10668         int hsync = I915_READ(HSYNC(cpu_transcoder));
10669         int vtot = I915_READ(VTOTAL(cpu_transcoder));
10670         int vsync = I915_READ(VSYNC(cpu_transcoder));
10671         enum pipe pipe = intel_crtc->pipe;
10672
10673         mode = kzalloc(sizeof(*mode), GFP_KERNEL);
10674         if (!mode)
10675                 return NULL;
10676
10677         /*
10678          * Construct a pipe_config sufficient for getting the clock info
10679          * back out of crtc_clock_get.
10680          *
10681          * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
10682          * to use a real value here instead.
10683          */
10684         pipe_config.cpu_transcoder = (enum transcoder) pipe;
10685         pipe_config.pixel_multiplier = 1;
10686         pipe_config.dpll_hw_state.dpll = I915_READ(DPLL(pipe));
10687         pipe_config.dpll_hw_state.fp0 = I915_READ(FP0(pipe));
10688         pipe_config.dpll_hw_state.fp1 = I915_READ(FP1(pipe));
10689         i9xx_crtc_clock_get(intel_crtc, &pipe_config);
10690
10691         mode->clock = pipe_config.port_clock / pipe_config.pixel_multiplier;
10692         mode->hdisplay = (htot & 0xffff) + 1;
10693         mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
10694         mode->hsync_start = (hsync & 0xffff) + 1;
10695         mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
10696         mode->vdisplay = (vtot & 0xffff) + 1;
10697         mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
10698         mode->vsync_start = (vsync & 0xffff) + 1;
10699         mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
10700
10701         drm_mode_set_name(mode);
10702
10703         return mode;
10704 }
10705
10706 void intel_mark_busy(struct drm_device *dev)
10707 {
10708         struct drm_i915_private *dev_priv = dev->dev_private;
10709
10710         if (dev_priv->mm.busy)
10711                 return;
10712
10713         intel_runtime_pm_get(dev_priv);
10714         i915_update_gfx_val(dev_priv);
10715         if (INTEL_INFO(dev)->gen >= 6)
10716                 gen6_rps_busy(dev_priv);
10717         dev_priv->mm.busy = true;
10718 }
10719
10720 void intel_mark_idle(struct drm_device *dev)
10721 {
10722         struct drm_i915_private *dev_priv = dev->dev_private;
10723
10724         if (!dev_priv->mm.busy)
10725                 return;
10726
10727         dev_priv->mm.busy = false;
10728
10729         if (INTEL_INFO(dev)->gen >= 6)
10730                 gen6_rps_idle(dev->dev_private);
10731
10732         intel_runtime_pm_put(dev_priv);
10733 }
10734
10735 static void intel_crtc_destroy(struct drm_crtc *crtc)
10736 {
10737         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10738         struct drm_device *dev = crtc->dev;
10739         struct intel_unpin_work *work;
10740
10741         spin_lock_irq(&dev->event_lock);
10742         work = intel_crtc->unpin_work;
10743         intel_crtc->unpin_work = NULL;
10744         spin_unlock_irq(&dev->event_lock);
10745
10746         if (work) {
10747                 cancel_work_sync(&work->work);
10748                 kfree(work);
10749         }
10750
10751         drm_crtc_cleanup(crtc);
10752
10753         kfree(intel_crtc);
10754 }
10755
10756 static void intel_unpin_work_fn(struct work_struct *__work)
10757 {
10758         struct intel_unpin_work *work =
10759                 container_of(__work, struct intel_unpin_work, work);
10760         struct intel_crtc *crtc = to_intel_crtc(work->crtc);
10761         struct drm_device *dev = crtc->base.dev;
10762         struct drm_plane *primary = crtc->base.primary;
10763
10764         mutex_lock(&dev->struct_mutex);
10765         intel_unpin_fb_obj(work->old_fb, primary->state);
10766         drm_gem_object_unreference(&work->pending_flip_obj->base);
10767
10768         if (work->flip_queued_req)
10769                 i915_gem_request_assign(&work->flip_queued_req, NULL);
10770         mutex_unlock(&dev->struct_mutex);
10771
10772         intel_frontbuffer_flip_complete(dev, to_intel_plane(primary)->frontbuffer_bit);
10773         drm_framebuffer_unreference(work->old_fb);
10774
10775         BUG_ON(atomic_read(&crtc->unpin_work_count) == 0);
10776         atomic_dec(&crtc->unpin_work_count);
10777
10778         kfree(work);
10779 }
10780
10781 static void do_intel_finish_page_flip(struct drm_device *dev,
10782                                       struct drm_crtc *crtc)
10783 {
10784         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10785         struct intel_unpin_work *work;
10786         unsigned long flags;
10787
10788         /* Ignore early vblank irqs */
10789         if (intel_crtc == NULL)
10790                 return;
10791
10792         /*
10793          * This is called both by irq handlers and the reset code (to complete
10794          * lost pageflips) so needs the full irqsave spinlocks.
10795          */
10796         spin_lock_irqsave(&dev->event_lock, flags);
10797         work = intel_crtc->unpin_work;
10798
10799         /* Ensure we don't miss a work->pending update ... */
10800         smp_rmb();
10801
10802         if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
10803                 spin_unlock_irqrestore(&dev->event_lock, flags);
10804                 return;
10805         }
10806
10807         page_flip_completed(intel_crtc);
10808
10809         spin_unlock_irqrestore(&dev->event_lock, flags);
10810 }
10811
10812 void intel_finish_page_flip(struct drm_device *dev, int pipe)
10813 {
10814         struct drm_i915_private *dev_priv = dev->dev_private;
10815         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
10816
10817         do_intel_finish_page_flip(dev, crtc);
10818 }
10819
10820 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
10821 {
10822         struct drm_i915_private *dev_priv = dev->dev_private;
10823         struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
10824
10825         do_intel_finish_page_flip(dev, crtc);
10826 }
10827
10828 /* Is 'a' after or equal to 'b'? */
10829 static bool g4x_flip_count_after_eq(u32 a, u32 b)
10830 {
10831         return !((a - b) & 0x80000000);
10832 }
10833
10834 static bool page_flip_finished(struct intel_crtc *crtc)
10835 {
10836         struct drm_device *dev = crtc->base.dev;
10837         struct drm_i915_private *dev_priv = dev->dev_private;
10838
10839         if (i915_reset_in_progress(&dev_priv->gpu_error) ||
10840             crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
10841                 return true;
10842
10843         /*
10844          * The relevant registers doen't exist on pre-ctg.
10845          * As the flip done interrupt doesn't trigger for mmio
10846          * flips on gmch platforms, a flip count check isn't
10847          * really needed there. But since ctg has the registers,
10848          * include it in the check anyway.
10849          */
10850         if (INTEL_INFO(dev)->gen < 5 && !IS_G4X(dev))
10851                 return true;
10852
10853         /*
10854          * A DSPSURFLIVE check isn't enough in case the mmio and CS flips
10855          * used the same base address. In that case the mmio flip might
10856          * have completed, but the CS hasn't even executed the flip yet.
10857          *
10858          * A flip count check isn't enough as the CS might have updated
10859          * the base address just after start of vblank, but before we
10860          * managed to process the interrupt. This means we'd complete the
10861          * CS flip too soon.
10862          *
10863          * Combining both checks should get us a good enough result. It may
10864          * still happen that the CS flip has been executed, but has not
10865          * yet actually completed. But in case the base address is the same
10866          * anyway, we don't really care.
10867          */
10868         return (I915_READ(DSPSURFLIVE(crtc->plane)) & ~0xfff) ==
10869                 crtc->unpin_work->gtt_offset &&
10870                 g4x_flip_count_after_eq(I915_READ(PIPE_FLIPCOUNT_G4X(crtc->pipe)),
10871                                     crtc->unpin_work->flip_count);
10872 }
10873
10874 void intel_prepare_page_flip(struct drm_device *dev, int plane)
10875 {
10876         struct drm_i915_private *dev_priv = dev->dev_private;
10877         struct intel_crtc *intel_crtc =
10878                 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
10879         unsigned long flags;
10880
10881
10882         /*
10883          * This is called both by irq handlers and the reset code (to complete
10884          * lost pageflips) so needs the full irqsave spinlocks.
10885          *
10886          * NB: An MMIO update of the plane base pointer will also
10887          * generate a page-flip completion irq, i.e. every modeset
10888          * is also accompanied by a spurious intel_prepare_page_flip().
10889          */
10890         spin_lock_irqsave(&dev->event_lock, flags);
10891         if (intel_crtc->unpin_work && page_flip_finished(intel_crtc))
10892                 atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
10893         spin_unlock_irqrestore(&dev->event_lock, flags);
10894 }
10895
10896 static inline void intel_mark_page_flip_active(struct intel_unpin_work *work)
10897 {
10898         /* Ensure that the work item is consistent when activating it ... */
10899         smp_wmb();
10900         atomic_set(&work->pending, INTEL_FLIP_PENDING);
10901         /* and that it is marked active as soon as the irq could fire. */
10902         smp_wmb();
10903 }
10904
10905 static int intel_gen2_queue_flip(struct drm_device *dev,
10906                                  struct drm_crtc *crtc,
10907                                  struct drm_framebuffer *fb,
10908                                  struct drm_i915_gem_object *obj,
10909                                  struct drm_i915_gem_request *req,
10910                                  uint32_t flags)
10911 {
10912         struct intel_engine_cs *ring = req->ring;
10913         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10914         u32 flip_mask;
10915         int ret;
10916
10917         ret = intel_ring_begin(req, 6);
10918         if (ret)
10919                 return ret;
10920
10921         /* Can't queue multiple flips, so wait for the previous
10922          * one to finish before executing the next.
10923          */
10924         if (intel_crtc->plane)
10925                 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
10926         else
10927                 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
10928         intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
10929         intel_ring_emit(ring, MI_NOOP);
10930         intel_ring_emit(ring, MI_DISPLAY_FLIP |
10931                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
10932         intel_ring_emit(ring, fb->pitches[0]);
10933         intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
10934         intel_ring_emit(ring, 0); /* aux display base address, unused */
10935
10936         intel_mark_page_flip_active(intel_crtc->unpin_work);
10937         return 0;
10938 }
10939
10940 static int intel_gen3_queue_flip(struct drm_device *dev,
10941                                  struct drm_crtc *crtc,
10942                                  struct drm_framebuffer *fb,
10943                                  struct drm_i915_gem_object *obj,
10944                                  struct drm_i915_gem_request *req,
10945                                  uint32_t flags)
10946 {
10947         struct intel_engine_cs *ring = req->ring;
10948         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10949         u32 flip_mask;
10950         int ret;
10951
10952         ret = intel_ring_begin(req, 6);
10953         if (ret)
10954                 return ret;
10955
10956         if (intel_crtc->plane)
10957                 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
10958         else
10959                 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
10960         intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
10961         intel_ring_emit(ring, MI_NOOP);
10962         intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
10963                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
10964         intel_ring_emit(ring, fb->pitches[0]);
10965         intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
10966         intel_ring_emit(ring, MI_NOOP);
10967
10968         intel_mark_page_flip_active(intel_crtc->unpin_work);
10969         return 0;
10970 }
10971
10972 static int intel_gen4_queue_flip(struct drm_device *dev,
10973                                  struct drm_crtc *crtc,
10974                                  struct drm_framebuffer *fb,
10975                                  struct drm_i915_gem_object *obj,
10976                                  struct drm_i915_gem_request *req,
10977                                  uint32_t flags)
10978 {
10979         struct intel_engine_cs *ring = req->ring;
10980         struct drm_i915_private *dev_priv = dev->dev_private;
10981         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
10982         uint32_t pf, pipesrc;
10983         int ret;
10984
10985         ret = intel_ring_begin(req, 4);
10986         if (ret)
10987                 return ret;
10988
10989         /* i965+ uses the linear or tiled offsets from the
10990          * Display Registers (which do not change across a page-flip)
10991          * so we need only reprogram the base address.
10992          */
10993         intel_ring_emit(ring, MI_DISPLAY_FLIP |
10994                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
10995         intel_ring_emit(ring, fb->pitches[0]);
10996         intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset |
10997                         obj->tiling_mode);
10998
10999         /* XXX Enabling the panel-fitter across page-flip is so far
11000          * untested on non-native modes, so ignore it for now.
11001          * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
11002          */
11003         pf = 0;
11004         pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
11005         intel_ring_emit(ring, pf | pipesrc);
11006
11007         intel_mark_page_flip_active(intel_crtc->unpin_work);
11008         return 0;
11009 }
11010
11011 static int intel_gen6_queue_flip(struct drm_device *dev,
11012                                  struct drm_crtc *crtc,
11013                                  struct drm_framebuffer *fb,
11014                                  struct drm_i915_gem_object *obj,
11015                                  struct drm_i915_gem_request *req,
11016                                  uint32_t flags)
11017 {
11018         struct intel_engine_cs *ring = req->ring;
11019         struct drm_i915_private *dev_priv = dev->dev_private;
11020         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11021         uint32_t pf, pipesrc;
11022         int ret;
11023
11024         ret = intel_ring_begin(req, 4);
11025         if (ret)
11026                 return ret;
11027
11028         intel_ring_emit(ring, MI_DISPLAY_FLIP |
11029                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
11030         intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
11031         intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
11032
11033         /* Contrary to the suggestions in the documentation,
11034          * "Enable Panel Fitter" does not seem to be required when page
11035          * flipping with a non-native mode, and worse causes a normal
11036          * modeset to fail.
11037          * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
11038          */
11039         pf = 0;
11040         pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
11041         intel_ring_emit(ring, pf | pipesrc);
11042
11043         intel_mark_page_flip_active(intel_crtc->unpin_work);
11044         return 0;
11045 }
11046
11047 static int intel_gen7_queue_flip(struct drm_device *dev,
11048                                  struct drm_crtc *crtc,
11049                                  struct drm_framebuffer *fb,
11050                                  struct drm_i915_gem_object *obj,
11051                                  struct drm_i915_gem_request *req,
11052                                  uint32_t flags)
11053 {
11054         struct intel_engine_cs *ring = req->ring;
11055         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11056         uint32_t plane_bit = 0;
11057         int len, ret;
11058
11059         switch (intel_crtc->plane) {
11060         case PLANE_A:
11061                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
11062                 break;
11063         case PLANE_B:
11064                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
11065                 break;
11066         case PLANE_C:
11067                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
11068                 break;
11069         default:
11070                 WARN_ONCE(1, "unknown plane in flip command\n");
11071                 return -ENODEV;
11072         }
11073
11074         len = 4;
11075         if (ring->id == RCS) {
11076                 len += 6;
11077                 /*
11078                  * On Gen 8, SRM is now taking an extra dword to accommodate
11079                  * 48bits addresses, and we need a NOOP for the batch size to
11080                  * stay even.
11081                  */
11082                 if (IS_GEN8(dev))
11083                         len += 2;
11084         }
11085
11086         /*
11087          * BSpec MI_DISPLAY_FLIP for IVB:
11088          * "The full packet must be contained within the same cache line."
11089          *
11090          * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
11091          * cacheline, if we ever start emitting more commands before
11092          * the MI_DISPLAY_FLIP we may need to first emit everything else,
11093          * then do the cacheline alignment, and finally emit the
11094          * MI_DISPLAY_FLIP.
11095          */
11096         ret = intel_ring_cacheline_align(req);
11097         if (ret)
11098                 return ret;
11099
11100         ret = intel_ring_begin(req, len);
11101         if (ret)
11102                 return ret;
11103
11104         /* Unmask the flip-done completion message. Note that the bspec says that
11105          * we should do this for both the BCS and RCS, and that we must not unmask
11106          * more than one flip event at any time (or ensure that one flip message
11107          * can be sent by waiting for flip-done prior to queueing new flips).
11108          * Experimentation says that BCS works despite DERRMR masking all
11109          * flip-done completion events and that unmasking all planes at once
11110          * for the RCS also doesn't appear to drop events. Setting the DERRMR
11111          * to zero does lead to lockups within MI_DISPLAY_FLIP.
11112          */
11113         if (ring->id == RCS) {
11114                 intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
11115                 intel_ring_emit(ring, DERRMR);
11116                 intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
11117                                         DERRMR_PIPEB_PRI_FLIP_DONE |
11118                                         DERRMR_PIPEC_PRI_FLIP_DONE));
11119                 if (IS_GEN8(dev))
11120                         intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8 |
11121                                               MI_SRM_LRM_GLOBAL_GTT);
11122                 else
11123                         intel_ring_emit(ring, MI_STORE_REGISTER_MEM |
11124                                               MI_SRM_LRM_GLOBAL_GTT);
11125                 intel_ring_emit(ring, DERRMR);
11126                 intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
11127                 if (IS_GEN8(dev)) {
11128                         intel_ring_emit(ring, 0);
11129                         intel_ring_emit(ring, MI_NOOP);
11130                 }
11131         }
11132
11133         intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
11134         intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
11135         intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
11136         intel_ring_emit(ring, (MI_NOOP));
11137
11138         intel_mark_page_flip_active(intel_crtc->unpin_work);
11139         return 0;
11140 }
11141
11142 static bool use_mmio_flip(struct intel_engine_cs *ring,
11143                           struct drm_i915_gem_object *obj)
11144 {
11145         /*
11146          * This is not being used for older platforms, because
11147          * non-availability of flip done interrupt forces us to use
11148          * CS flips. Older platforms derive flip done using some clever
11149          * tricks involving the flip_pending status bits and vblank irqs.
11150          * So using MMIO flips there would disrupt this mechanism.
11151          */
11152
11153         if (ring == NULL)
11154                 return true;
11155
11156         if (INTEL_INFO(ring->dev)->gen < 5)
11157                 return false;
11158
11159         if (i915.use_mmio_flip < 0)
11160                 return false;
11161         else if (i915.use_mmio_flip > 0)
11162                 return true;
11163         else if (i915.enable_execlists)
11164                 return true;
11165         else
11166                 return ring != i915_gem_request_get_ring(obj->last_write_req);
11167 }
11168
11169 static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
11170                              struct intel_unpin_work *work)
11171 {
11172         struct drm_device *dev = intel_crtc->base.dev;
11173         struct drm_i915_private *dev_priv = dev->dev_private;
11174         struct drm_framebuffer *fb = intel_crtc->base.primary->fb;
11175         const enum pipe pipe = intel_crtc->pipe;
11176         u32 ctl, stride;
11177
11178         ctl = I915_READ(PLANE_CTL(pipe, 0));
11179         ctl &= ~PLANE_CTL_TILED_MASK;
11180         switch (fb->modifier[0]) {
11181         case DRM_FORMAT_MOD_NONE:
11182                 break;
11183         case I915_FORMAT_MOD_X_TILED:
11184                 ctl |= PLANE_CTL_TILED_X;
11185                 break;
11186         case I915_FORMAT_MOD_Y_TILED:
11187                 ctl |= PLANE_CTL_TILED_Y;
11188                 break;
11189         case I915_FORMAT_MOD_Yf_TILED:
11190                 ctl |= PLANE_CTL_TILED_YF;
11191                 break;
11192         default:
11193                 MISSING_CASE(fb->modifier[0]);
11194         }
11195
11196         /*
11197          * The stride is either expressed as a multiple of 64 bytes chunks for
11198          * linear buffers or in number of tiles for tiled buffers.
11199          */
11200         stride = fb->pitches[0] /
11201                  intel_fb_stride_alignment(dev, fb->modifier[0],
11202                                            fb->pixel_format);
11203
11204         /*
11205          * Both PLANE_CTL and PLANE_STRIDE are not updated on vblank but on
11206          * PLANE_SURF updates, the update is then guaranteed to be atomic.
11207          */
11208         I915_WRITE(PLANE_CTL(pipe, 0), ctl);
11209         I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
11210
11211         I915_WRITE(PLANE_SURF(pipe, 0), work->gtt_offset);
11212         POSTING_READ(PLANE_SURF(pipe, 0));
11213 }
11214
11215 static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc,
11216                              struct intel_unpin_work *work)
11217 {
11218         struct drm_device *dev = intel_crtc->base.dev;
11219         struct drm_i915_private *dev_priv = dev->dev_private;
11220         struct intel_framebuffer *intel_fb =
11221                 to_intel_framebuffer(intel_crtc->base.primary->fb);
11222         struct drm_i915_gem_object *obj = intel_fb->obj;
11223         u32 dspcntr;
11224         u32 reg;
11225
11226         reg = DSPCNTR(intel_crtc->plane);
11227         dspcntr = I915_READ(reg);
11228
11229         if (obj->tiling_mode != I915_TILING_NONE)
11230                 dspcntr |= DISPPLANE_TILED;
11231         else
11232                 dspcntr &= ~DISPPLANE_TILED;
11233
11234         I915_WRITE(reg, dspcntr);
11235
11236         I915_WRITE(DSPSURF(intel_crtc->plane), work->gtt_offset);
11237         POSTING_READ(DSPSURF(intel_crtc->plane));
11238 }
11239
11240 /*
11241  * XXX: This is the temporary way to update the plane registers until we get
11242  * around to using the usual plane update functions for MMIO flips
11243  */
11244 static void intel_do_mmio_flip(struct intel_mmio_flip *mmio_flip)
11245 {
11246         struct intel_crtc *crtc = mmio_flip->crtc;
11247         struct intel_unpin_work *work;
11248
11249         spin_lock_irq(&crtc->base.dev->event_lock);
11250         work = crtc->unpin_work;
11251         spin_unlock_irq(&crtc->base.dev->event_lock);
11252         if (work == NULL)
11253                 return;
11254
11255         intel_mark_page_flip_active(work);
11256
11257         intel_pipe_update_start(crtc);
11258
11259         if (INTEL_INFO(mmio_flip->i915)->gen >= 9)
11260                 skl_do_mmio_flip(crtc, work);
11261         else
11262                 /* use_mmio_flip() retricts MMIO flips to ilk+ */
11263                 ilk_do_mmio_flip(crtc, work);
11264
11265         intel_pipe_update_end(crtc);
11266 }
11267
11268 static void intel_mmio_flip_work_func(struct work_struct *work)
11269 {
11270         struct intel_mmio_flip *mmio_flip =
11271                 container_of(work, struct intel_mmio_flip, work);
11272
11273         if (mmio_flip->req) {
11274                 WARN_ON(__i915_wait_request(mmio_flip->req,
11275                                             mmio_flip->crtc->reset_counter,
11276                                             false, NULL,
11277                                             &mmio_flip->i915->rps.mmioflips));
11278                 i915_gem_request_unreference__unlocked(mmio_flip->req);
11279         }
11280
11281         intel_do_mmio_flip(mmio_flip);
11282         kfree(mmio_flip);
11283 }
11284
11285 static int intel_queue_mmio_flip(struct drm_device *dev,
11286                                  struct drm_crtc *crtc,
11287                                  struct drm_framebuffer *fb,
11288                                  struct drm_i915_gem_object *obj,
11289                                  struct intel_engine_cs *ring,
11290                                  uint32_t flags)
11291 {
11292         struct intel_mmio_flip *mmio_flip;
11293
11294         mmio_flip = kmalloc(sizeof(*mmio_flip), GFP_KERNEL);
11295         if (mmio_flip == NULL)
11296                 return -ENOMEM;
11297
11298         mmio_flip->i915 = to_i915(dev);
11299         mmio_flip->req = i915_gem_request_reference(obj->last_write_req);
11300         mmio_flip->crtc = to_intel_crtc(crtc);
11301
11302         INIT_WORK(&mmio_flip->work, intel_mmio_flip_work_func);
11303         schedule_work(&mmio_flip->work);
11304
11305         return 0;
11306 }
11307
11308 static int intel_default_queue_flip(struct drm_device *dev,
11309                                     struct drm_crtc *crtc,
11310                                     struct drm_framebuffer *fb,
11311                                     struct drm_i915_gem_object *obj,
11312                                     struct drm_i915_gem_request *req,
11313                                     uint32_t flags)
11314 {
11315         return -ENODEV;
11316 }
11317
11318 static bool __intel_pageflip_stall_check(struct drm_device *dev,
11319                                          struct drm_crtc *crtc)
11320 {
11321         struct drm_i915_private *dev_priv = dev->dev_private;
11322         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11323         struct intel_unpin_work *work = intel_crtc->unpin_work;
11324         u32 addr;
11325
11326         if (atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE)
11327                 return true;
11328
11329         if (atomic_read(&work->pending) < INTEL_FLIP_PENDING)
11330                 return false;
11331
11332         if (!work->enable_stall_check)
11333                 return false;
11334
11335         if (work->flip_ready_vblank == 0) {
11336                 if (work->flip_queued_req &&
11337                     !i915_gem_request_completed(work->flip_queued_req, true))
11338                         return false;
11339
11340                 work->flip_ready_vblank = drm_crtc_vblank_count(crtc);
11341         }
11342
11343         if (drm_crtc_vblank_count(crtc) - work->flip_ready_vblank < 3)
11344                 return false;
11345
11346         /* Potential stall - if we see that the flip has happened,
11347          * assume a missed interrupt. */
11348         if (INTEL_INFO(dev)->gen >= 4)
11349                 addr = I915_HI_DISPBASE(I915_READ(DSPSURF(intel_crtc->plane)));
11350         else
11351                 addr = I915_READ(DSPADDR(intel_crtc->plane));
11352
11353         /* There is a potential issue here with a false positive after a flip
11354          * to the same address. We could address this by checking for a
11355          * non-incrementing frame counter.
11356          */
11357         return addr == work->gtt_offset;
11358 }
11359
11360 void intel_check_page_flip(struct drm_device *dev, int pipe)
11361 {
11362         struct drm_i915_private *dev_priv = dev->dev_private;
11363         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
11364         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11365         struct intel_unpin_work *work;
11366
11367         WARN_ON(!in_interrupt());
11368
11369         if (crtc == NULL)
11370                 return;
11371
11372         spin_lock(&dev->event_lock);
11373         work = intel_crtc->unpin_work;
11374         if (work != NULL && __intel_pageflip_stall_check(dev, crtc)) {
11375                 WARN_ONCE(1, "Kicking stuck page flip: queued at %d, now %d\n",
11376                          work->flip_queued_vblank, drm_vblank_count(dev, pipe));
11377                 page_flip_completed(intel_crtc);
11378                 work = NULL;
11379         }
11380         if (work != NULL &&
11381             drm_vblank_count(dev, pipe) - work->flip_queued_vblank > 1)
11382                 intel_queue_rps_boost_for_request(dev, work->flip_queued_req);
11383         spin_unlock(&dev->event_lock);
11384 }
11385
11386 static int intel_crtc_page_flip(struct drm_crtc *crtc,
11387                                 struct drm_framebuffer *fb,
11388                                 struct drm_pending_vblank_event *event,
11389                                 uint32_t page_flip_flags)
11390 {
11391         struct drm_device *dev = crtc->dev;
11392         struct drm_i915_private *dev_priv = dev->dev_private;
11393         struct drm_framebuffer *old_fb = crtc->primary->fb;
11394         struct drm_i915_gem_object *obj = intel_fb_obj(fb);
11395         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11396         struct drm_plane *primary = crtc->primary;
11397         enum pipe pipe = intel_crtc->pipe;
11398         struct intel_unpin_work *work;
11399         struct intel_engine_cs *ring;
11400         bool mmio_flip;
11401         struct drm_i915_gem_request *request = NULL;
11402         int ret;
11403
11404         /*
11405          * drm_mode_page_flip_ioctl() should already catch this, but double
11406          * check to be safe.  In the future we may enable pageflipping from
11407          * a disabled primary plane.
11408          */
11409         if (WARN_ON(intel_fb_obj(old_fb) == NULL))
11410                 return -EBUSY;
11411
11412         /* Can't change pixel format via MI display flips. */
11413         if (fb->pixel_format != crtc->primary->fb->pixel_format)
11414                 return -EINVAL;
11415
11416         /*
11417          * TILEOFF/LINOFF registers can't be changed via MI display flips.
11418          * Note that pitch changes could also affect these register.
11419          */
11420         if (INTEL_INFO(dev)->gen > 3 &&
11421             (fb->offsets[0] != crtc->primary->fb->offsets[0] ||
11422              fb->pitches[0] != crtc->primary->fb->pitches[0]))
11423                 return -EINVAL;
11424
11425         if (i915_terminally_wedged(&dev_priv->gpu_error))
11426                 goto out_hang;
11427
11428         work = kzalloc(sizeof(*work), GFP_KERNEL);
11429         if (work == NULL)
11430                 return -ENOMEM;
11431
11432         work->event = event;
11433         work->crtc = crtc;
11434         work->old_fb = old_fb;
11435         INIT_WORK(&work->work, intel_unpin_work_fn);
11436
11437         ret = drm_crtc_vblank_get(crtc);
11438         if (ret)
11439                 goto free_work;
11440
11441         /* We borrow the event spin lock for protecting unpin_work */
11442         spin_lock_irq(&dev->event_lock);
11443         if (intel_crtc->unpin_work) {
11444                 /* Before declaring the flip queue wedged, check if
11445                  * the hardware completed the operation behind our backs.
11446                  */
11447                 if (__intel_pageflip_stall_check(dev, crtc)) {
11448                         DRM_DEBUG_DRIVER("flip queue: previous flip completed, continuing\n");
11449                         page_flip_completed(intel_crtc);
11450                 } else {
11451                         DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
11452                         spin_unlock_irq(&dev->event_lock);
11453
11454                         drm_crtc_vblank_put(crtc);
11455                         kfree(work);
11456                         return -EBUSY;
11457                 }
11458         }
11459         intel_crtc->unpin_work = work;
11460         spin_unlock_irq(&dev->event_lock);
11461
11462         if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
11463                 flush_workqueue(dev_priv->wq);
11464
11465         /* Reference the objects for the scheduled work. */
11466         drm_framebuffer_reference(work->old_fb);
11467         drm_gem_object_reference(&obj->base);
11468
11469         crtc->primary->fb = fb;
11470         update_state_fb(crtc->primary);
11471
11472         work->pending_flip_obj = obj;
11473
11474         ret = i915_mutex_lock_interruptible(dev);
11475         if (ret)
11476                 goto cleanup;
11477
11478         atomic_inc(&intel_crtc->unpin_work_count);
11479         intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
11480
11481         if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
11482                 work->flip_count = I915_READ(PIPE_FLIPCOUNT_G4X(pipe)) + 1;
11483
11484         if (IS_VALLEYVIEW(dev)) {
11485                 ring = &dev_priv->ring[BCS];
11486                 if (obj->tiling_mode != intel_fb_obj(work->old_fb)->tiling_mode)
11487                         /* vlv: DISPLAY_FLIP fails to change tiling */
11488                         ring = NULL;
11489         } else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
11490                 ring = &dev_priv->ring[BCS];
11491         } else if (INTEL_INFO(dev)->gen >= 7) {
11492                 ring = i915_gem_request_get_ring(obj->last_write_req);
11493                 if (ring == NULL || ring->id != RCS)
11494                         ring = &dev_priv->ring[BCS];
11495         } else {
11496                 ring = &dev_priv->ring[RCS];
11497         }
11498
11499         mmio_flip = use_mmio_flip(ring, obj);
11500
11501         /* When using CS flips, we want to emit semaphores between rings.
11502          * However, when using mmio flips we will create a task to do the
11503          * synchronisation, so all we want here is to pin the framebuffer
11504          * into the display plane and skip any waits.
11505          */
11506         ret = intel_pin_and_fence_fb_obj(crtc->primary, fb,
11507                                          crtc->primary->state,
11508                                          mmio_flip ? i915_gem_request_get_ring(obj->last_write_req) : ring, &request);
11509         if (ret)
11510                 goto cleanup_pending;
11511
11512         work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary),
11513                                                   obj, 0);
11514         work->gtt_offset += intel_crtc->dspaddr_offset;
11515
11516         if (mmio_flip) {
11517                 ret = intel_queue_mmio_flip(dev, crtc, fb, obj, ring,
11518                                             page_flip_flags);
11519                 if (ret)
11520                         goto cleanup_unpin;
11521
11522                 i915_gem_request_assign(&work->flip_queued_req,
11523                                         obj->last_write_req);
11524         } else {
11525                 if (!request) {
11526                         ret = i915_gem_request_alloc(ring, ring->default_context, &request);
11527                         if (ret)
11528                                 goto cleanup_unpin;
11529                 }
11530
11531                 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, request,
11532                                                    page_flip_flags);
11533                 if (ret)
11534                         goto cleanup_unpin;
11535
11536                 i915_gem_request_assign(&work->flip_queued_req, request);
11537         }
11538
11539         if (request)
11540                 i915_add_request_no_flush(request);
11541
11542         work->flip_queued_vblank = drm_crtc_vblank_count(crtc);
11543         work->enable_stall_check = true;
11544
11545         i915_gem_track_fb(intel_fb_obj(work->old_fb), obj,
11546                           to_intel_plane(primary)->frontbuffer_bit);
11547         mutex_unlock(&dev->struct_mutex);
11548
11549         intel_fbc_disable_crtc(intel_crtc);
11550         intel_frontbuffer_flip_prepare(dev,
11551                                        to_intel_plane(primary)->frontbuffer_bit);
11552
11553         trace_i915_flip_request(intel_crtc->plane, obj);
11554
11555         return 0;
11556
11557 cleanup_unpin:
11558         intel_unpin_fb_obj(fb, crtc->primary->state);
11559 cleanup_pending:
11560         if (request)
11561                 i915_gem_request_cancel(request);
11562         atomic_dec(&intel_crtc->unpin_work_count);
11563         mutex_unlock(&dev->struct_mutex);
11564 cleanup:
11565         crtc->primary->fb = old_fb;
11566         update_state_fb(crtc->primary);
11567
11568         drm_gem_object_unreference_unlocked(&obj->base);
11569         drm_framebuffer_unreference(work->old_fb);
11570
11571         spin_lock_irq(&dev->event_lock);
11572         intel_crtc->unpin_work = NULL;
11573         spin_unlock_irq(&dev->event_lock);
11574
11575         drm_crtc_vblank_put(crtc);
11576 free_work:
11577         kfree(work);
11578
11579         if (ret == -EIO) {
11580                 struct drm_atomic_state *state;
11581                 struct drm_plane_state *plane_state;
11582
11583 out_hang:
11584                 state = drm_atomic_state_alloc(dev);
11585                 if (!state)
11586                         return -ENOMEM;
11587                 state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
11588
11589 retry:
11590                 plane_state = drm_atomic_get_plane_state(state, primary);
11591                 ret = PTR_ERR_OR_ZERO(plane_state);
11592                 if (!ret) {
11593                         drm_atomic_set_fb_for_plane(plane_state, fb);
11594
11595                         ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
11596                         if (!ret)
11597                                 ret = drm_atomic_commit(state);
11598                 }
11599
11600                 if (ret == -EDEADLK) {
11601                         drm_modeset_backoff(state->acquire_ctx);
11602                         drm_atomic_state_clear(state);
11603                         goto retry;
11604                 }
11605
11606                 if (ret)
11607                         drm_atomic_state_free(state);
11608
11609                 if (ret == 0 && event) {
11610                         spin_lock_irq(&dev->event_lock);
11611                         drm_send_vblank_event(dev, pipe, event);
11612                         spin_unlock_irq(&dev->event_lock);
11613                 }
11614         }
11615         return ret;
11616 }
11617
11618
11619 /**
11620  * intel_wm_need_update - Check whether watermarks need updating
11621  * @plane: drm plane
11622  * @state: new plane state
11623  *
11624  * Check current plane state versus the new one to determine whether
11625  * watermarks need to be recalculated.
11626  *
11627  * Returns true or false.
11628  */
11629 static bool intel_wm_need_update(struct drm_plane *plane,
11630                                  struct drm_plane_state *state)
11631 {
11632         /* Update watermarks on tiling changes. */
11633         if (!plane->state->fb || !state->fb ||
11634             plane->state->fb->modifier[0] != state->fb->modifier[0] ||
11635             plane->state->rotation != state->rotation)
11636                 return true;
11637
11638         if (plane->state->crtc_w != state->crtc_w)
11639                 return true;
11640
11641         return false;
11642 }
11643
11644 int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
11645                                     struct drm_plane_state *plane_state)
11646 {
11647         struct drm_crtc *crtc = crtc_state->crtc;
11648         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11649         struct drm_plane *plane = plane_state->plane;
11650         struct drm_device *dev = crtc->dev;
11651         struct drm_i915_private *dev_priv = dev->dev_private;
11652         struct intel_plane_state *old_plane_state =
11653                 to_intel_plane_state(plane->state);
11654         int idx = intel_crtc->base.base.id, ret;
11655         int i = drm_plane_index(plane);
11656         bool mode_changed = needs_modeset(crtc_state);
11657         bool was_crtc_enabled = crtc->state->active;
11658         bool is_crtc_enabled = crtc_state->active;
11659
11660         bool turn_off, turn_on, visible, was_visible;
11661         struct drm_framebuffer *fb = plane_state->fb;
11662
11663         if (crtc_state && INTEL_INFO(dev)->gen >= 9 &&
11664             plane->type != DRM_PLANE_TYPE_CURSOR) {
11665                 ret = skl_update_scaler_plane(
11666                         to_intel_crtc_state(crtc_state),
11667                         to_intel_plane_state(plane_state));
11668                 if (ret)
11669                         return ret;
11670         }
11671
11672         /*
11673          * Disabling a plane is always okay; we just need to update
11674          * fb tracking in a special way since cleanup_fb() won't
11675          * get called by the plane helpers.
11676          */
11677         if (old_plane_state->base.fb && !fb)
11678                 intel_crtc->atomic.disabled_planes |= 1 << i;
11679
11680         was_visible = old_plane_state->visible;
11681         visible = to_intel_plane_state(plane_state)->visible;
11682
11683         if (!was_crtc_enabled && WARN_ON(was_visible))
11684                 was_visible = false;
11685
11686         if (!is_crtc_enabled && WARN_ON(visible))
11687                 visible = false;
11688
11689         if (!was_visible && !visible)
11690                 return 0;
11691
11692         turn_off = was_visible && (!visible || mode_changed);
11693         turn_on = visible && (!was_visible || mode_changed);
11694
11695         DRM_DEBUG_ATOMIC("[CRTC:%i] has [PLANE:%i] with fb %i\n", idx,
11696                          plane->base.id, fb ? fb->base.id : -1);
11697
11698         DRM_DEBUG_ATOMIC("[PLANE:%i] visible %i -> %i, off %i, on %i, ms %i\n",
11699                          plane->base.id, was_visible, visible,
11700                          turn_off, turn_on, mode_changed);
11701
11702         if (turn_on) {
11703                 intel_crtc->atomic.update_wm_pre = true;
11704                 /* must disable cxsr around plane enable/disable */
11705                 if (plane->type != DRM_PLANE_TYPE_CURSOR) {
11706                         intel_crtc->atomic.disable_cxsr = true;
11707                         /* to potentially re-enable cxsr */
11708                         intel_crtc->atomic.wait_vblank = true;
11709                         intel_crtc->atomic.update_wm_post = true;
11710                 }
11711         } else if (turn_off) {
11712                 intel_crtc->atomic.update_wm_post = true;
11713                 /* must disable cxsr around plane enable/disable */
11714                 if (plane->type != DRM_PLANE_TYPE_CURSOR) {
11715                         if (is_crtc_enabled)
11716                                 intel_crtc->atomic.wait_vblank = true;
11717                         intel_crtc->atomic.disable_cxsr = true;
11718                 }
11719         } else if (intel_wm_need_update(plane, plane_state)) {
11720                 intel_crtc->atomic.update_wm_pre = true;
11721         }
11722
11723         if (visible || was_visible)
11724                 intel_crtc->atomic.fb_bits |=
11725                         to_intel_plane(plane)->frontbuffer_bit;
11726
11727         switch (plane->type) {
11728         case DRM_PLANE_TYPE_PRIMARY:
11729                 intel_crtc->atomic.wait_for_flips = true;
11730                 intel_crtc->atomic.pre_disable_primary = turn_off;
11731                 intel_crtc->atomic.post_enable_primary = turn_on;
11732
11733                 if (turn_off) {
11734                         /*
11735                          * FIXME: Actually if we will still have any other
11736                          * plane enabled on the pipe we could let IPS enabled
11737                          * still, but for now lets consider that when we make
11738                          * primary invisible by setting DSPCNTR to 0 on
11739                          * update_primary_plane function IPS needs to be
11740                          * disable.
11741                          */
11742                         intel_crtc->atomic.disable_ips = true;
11743
11744                         intel_crtc->atomic.disable_fbc = true;
11745                 }
11746
11747                 /*
11748                  * FBC does not work on some platforms for rotated
11749                  * planes, so disable it when rotation is not 0 and
11750                  * update it when rotation is set back to 0.
11751                  *
11752                  * FIXME: This is redundant with the fbc update done in
11753                  * the primary plane enable function except that that
11754                  * one is done too late. We eventually need to unify
11755                  * this.
11756                  */
11757
11758                 if (visible &&
11759                     INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
11760                     dev_priv->fbc.crtc == intel_crtc &&
11761                     plane_state->rotation != BIT(DRM_ROTATE_0))
11762                         intel_crtc->atomic.disable_fbc = true;
11763
11764                 /*
11765                  * BDW signals flip done immediately if the plane
11766                  * is disabled, even if the plane enable is already
11767                  * armed to occur at the next vblank :(
11768                  */
11769                 if (turn_on && IS_BROADWELL(dev))
11770                         intel_crtc->atomic.wait_vblank = true;
11771
11772                 intel_crtc->atomic.update_fbc |= visible || mode_changed;
11773                 break;
11774         case DRM_PLANE_TYPE_CURSOR:
11775                 break;
11776         case DRM_PLANE_TYPE_OVERLAY:
11777                 if (turn_off && !mode_changed) {
11778                         intel_crtc->atomic.wait_vblank = true;
11779                         intel_crtc->atomic.update_sprite_watermarks |=
11780                                 1 << i;
11781                 }
11782         }
11783         return 0;
11784 }
11785
11786 static bool encoders_cloneable(const struct intel_encoder *a,
11787                                const struct intel_encoder *b)
11788 {
11789         /* masks could be asymmetric, so check both ways */
11790         return a == b || (a->cloneable & (1 << b->type) &&
11791                           b->cloneable & (1 << a->type));
11792 }
11793
11794 static bool check_single_encoder_cloning(struct drm_atomic_state *state,
11795                                          struct intel_crtc *crtc,
11796                                          struct intel_encoder *encoder)
11797 {
11798         struct intel_encoder *source_encoder;
11799         struct drm_connector *connector;
11800         struct drm_connector_state *connector_state;
11801         int i;
11802
11803         for_each_connector_in_state(state, connector, connector_state, i) {
11804                 if (connector_state->crtc != &crtc->base)
11805                         continue;
11806
11807                 source_encoder =
11808                         to_intel_encoder(connector_state->best_encoder);
11809                 if (!encoders_cloneable(encoder, source_encoder))
11810                         return false;
11811         }
11812
11813         return true;
11814 }
11815
11816 static bool check_encoder_cloning(struct drm_atomic_state *state,
11817                                   struct intel_crtc *crtc)
11818 {
11819         struct intel_encoder *encoder;
11820         struct drm_connector *connector;
11821         struct drm_connector_state *connector_state;
11822         int i;
11823
11824         for_each_connector_in_state(state, connector, connector_state, i) {
11825                 if (connector_state->crtc != &crtc->base)
11826                         continue;
11827
11828                 encoder = to_intel_encoder(connector_state->best_encoder);
11829                 if (!check_single_encoder_cloning(state, crtc, encoder))
11830                         return false;
11831         }
11832
11833         return true;
11834 }
11835
11836 static int intel_crtc_atomic_check(struct drm_crtc *crtc,
11837                                    struct drm_crtc_state *crtc_state)
11838 {
11839         struct drm_device *dev = crtc->dev;
11840         struct drm_i915_private *dev_priv = dev->dev_private;
11841         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11842         struct intel_crtc_state *pipe_config =
11843                 to_intel_crtc_state(crtc_state);
11844         struct drm_atomic_state *state = crtc_state->state;
11845         int ret;
11846         bool mode_changed = needs_modeset(crtc_state);
11847
11848         if (mode_changed && !check_encoder_cloning(state, intel_crtc)) {
11849                 DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
11850                 return -EINVAL;
11851         }
11852
11853         if (mode_changed && !crtc_state->active)
11854                 intel_crtc->atomic.update_wm_post = true;
11855
11856         if (mode_changed && crtc_state->enable &&
11857             dev_priv->display.crtc_compute_clock &&
11858             !WARN_ON(pipe_config->shared_dpll != DPLL_ID_PRIVATE)) {
11859                 ret = dev_priv->display.crtc_compute_clock(intel_crtc,
11860                                                            pipe_config);
11861                 if (ret)
11862                         return ret;
11863         }
11864
11865         ret = 0;
11866         if (INTEL_INFO(dev)->gen >= 9) {
11867                 if (mode_changed)
11868                         ret = skl_update_scaler_crtc(pipe_config);
11869
11870                 if (!ret)
11871                         ret = intel_atomic_setup_scalers(dev, intel_crtc,
11872                                                          pipe_config);
11873         }
11874
11875         return ret;
11876 }
11877
11878 static const struct drm_crtc_helper_funcs intel_helper_funcs = {
11879         .mode_set_base_atomic = intel_pipe_set_base_atomic,
11880         .load_lut = intel_crtc_load_lut,
11881         .atomic_begin = intel_begin_crtc_commit,
11882         .atomic_flush = intel_finish_crtc_commit,
11883         .atomic_check = intel_crtc_atomic_check,
11884 };
11885
11886 static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
11887 {
11888         struct intel_connector *connector;
11889
11890         for_each_intel_connector(dev, connector) {
11891                 if (connector->base.encoder) {
11892                         connector->base.state->best_encoder =
11893                                 connector->base.encoder;
11894                         connector->base.state->crtc =
11895                                 connector->base.encoder->crtc;
11896                 } else {
11897                         connector->base.state->best_encoder = NULL;
11898                         connector->base.state->crtc = NULL;
11899                 }
11900         }
11901 }
11902
11903 static void
11904 connected_sink_compute_bpp(struct intel_connector *connector,
11905                            struct intel_crtc_state *pipe_config)
11906 {
11907         int bpp = pipe_config->pipe_bpp;
11908
11909         DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
11910                 connector->base.base.id,
11911                 connector->base.name);
11912
11913         /* Don't use an invalid EDID bpc value */
11914         if (connector->base.display_info.bpc &&
11915             connector->base.display_info.bpc * 3 < bpp) {
11916                 DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
11917                               bpp, connector->base.display_info.bpc*3);
11918                 pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
11919         }
11920
11921         /* Clamp bpp to 8 on screens without EDID 1.4 */
11922         if (connector->base.display_info.bpc == 0 && bpp > 24) {
11923                 DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n",
11924                               bpp);
11925                 pipe_config->pipe_bpp = 24;
11926         }
11927 }
11928
11929 static int
11930 compute_baseline_pipe_bpp(struct intel_crtc *crtc,
11931                           struct intel_crtc_state *pipe_config)
11932 {
11933         struct drm_device *dev = crtc->base.dev;
11934         struct drm_atomic_state *state;
11935         struct drm_connector *connector;
11936         struct drm_connector_state *connector_state;
11937         int bpp, i;
11938
11939         if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)))
11940                 bpp = 10*3;
11941         else if (INTEL_INFO(dev)->gen >= 5)
11942                 bpp = 12*3;
11943         else
11944                 bpp = 8*3;
11945
11946
11947         pipe_config->pipe_bpp = bpp;
11948
11949         state = pipe_config->base.state;
11950
11951         /* Clamp display bpp to EDID value */
11952         for_each_connector_in_state(state, connector, connector_state, i) {
11953                 if (connector_state->crtc != &crtc->base)
11954                         continue;
11955
11956                 connected_sink_compute_bpp(to_intel_connector(connector),
11957                                            pipe_config);
11958         }
11959
11960         return bpp;
11961 }
11962
11963 static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
11964 {
11965         DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
11966                         "type: 0x%x flags: 0x%x\n",
11967                 mode->crtc_clock,
11968                 mode->crtc_hdisplay, mode->crtc_hsync_start,
11969                 mode->crtc_hsync_end, mode->crtc_htotal,
11970                 mode->crtc_vdisplay, mode->crtc_vsync_start,
11971                 mode->crtc_vsync_end, mode->crtc_vtotal, mode->type, mode->flags);
11972 }
11973
11974 static void intel_dump_pipe_config(struct intel_crtc *crtc,
11975                                    struct intel_crtc_state *pipe_config,
11976                                    const char *context)
11977 {
11978         struct drm_device *dev = crtc->base.dev;
11979         struct drm_plane *plane;
11980         struct intel_plane *intel_plane;
11981         struct intel_plane_state *state;
11982         struct drm_framebuffer *fb;
11983
11984         DRM_DEBUG_KMS("[CRTC:%d]%s config %p for pipe %c\n", crtc->base.base.id,
11985                       context, pipe_config, pipe_name(crtc->pipe));
11986
11987         DRM_DEBUG_KMS("cpu_transcoder: %c\n", transcoder_name(pipe_config->cpu_transcoder));
11988         DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
11989                       pipe_config->pipe_bpp, pipe_config->dither);
11990         DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
11991                       pipe_config->has_pch_encoder,
11992                       pipe_config->fdi_lanes,
11993                       pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
11994                       pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
11995                       pipe_config->fdi_m_n.tu);
11996         DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
11997                       pipe_config->has_dp_encoder,
11998                       pipe_config->lane_count,
11999                       pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
12000                       pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
12001                       pipe_config->dp_m_n.tu);
12002
12003         DRM_DEBUG_KMS("dp: %i, lanes: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
12004                       pipe_config->has_dp_encoder,
12005                       pipe_config->lane_count,
12006                       pipe_config->dp_m2_n2.gmch_m,
12007                       pipe_config->dp_m2_n2.gmch_n,
12008                       pipe_config->dp_m2_n2.link_m,
12009                       pipe_config->dp_m2_n2.link_n,
12010                       pipe_config->dp_m2_n2.tu);
12011
12012         DRM_DEBUG_KMS("audio: %i, infoframes: %i\n",
12013                       pipe_config->has_audio,
12014                       pipe_config->has_infoframe);
12015
12016         DRM_DEBUG_KMS("requested mode:\n");
12017         drm_mode_debug_printmodeline(&pipe_config->base.mode);
12018         DRM_DEBUG_KMS("adjusted mode:\n");
12019         drm_mode_debug_printmodeline(&pipe_config->base.adjusted_mode);
12020         intel_dump_crtc_timings(&pipe_config->base.adjusted_mode);
12021         DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
12022         DRM_DEBUG_KMS("pipe src size: %dx%d\n",
12023                       pipe_config->pipe_src_w, pipe_config->pipe_src_h);
12024         DRM_DEBUG_KMS("num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n",
12025                       crtc->num_scalers,
12026                       pipe_config->scaler_state.scaler_users,
12027                       pipe_config->scaler_state.scaler_id);
12028         DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
12029                       pipe_config->gmch_pfit.control,
12030                       pipe_config->gmch_pfit.pgm_ratios,
12031                       pipe_config->gmch_pfit.lvds_border_bits);
12032         DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
12033                       pipe_config->pch_pfit.pos,
12034                       pipe_config->pch_pfit.size,
12035                       pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
12036         DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
12037         DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
12038
12039         if (IS_BROXTON(dev)) {
12040                 DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: ebb0: 0x%x, ebb4: 0x%x,"
12041                               "pll0: 0x%x, pll1: 0x%x, pll2: 0x%x, pll3: 0x%x, "
12042                               "pll6: 0x%x, pll8: 0x%x, pll9: 0x%x, pll10: 0x%x, pcsdw12: 0x%x\n",
12043                               pipe_config->ddi_pll_sel,
12044                               pipe_config->dpll_hw_state.ebb0,
12045                               pipe_config->dpll_hw_state.ebb4,
12046                               pipe_config->dpll_hw_state.pll0,
12047                               pipe_config->dpll_hw_state.pll1,
12048                               pipe_config->dpll_hw_state.pll2,
12049                               pipe_config->dpll_hw_state.pll3,
12050                               pipe_config->dpll_hw_state.pll6,
12051                               pipe_config->dpll_hw_state.pll8,
12052                               pipe_config->dpll_hw_state.pll9,
12053                               pipe_config->dpll_hw_state.pll10,
12054                               pipe_config->dpll_hw_state.pcsdw12);
12055         } else if (IS_SKYLAKE(dev)) {
12056                 DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: "
12057                               "ctrl1: 0x%x, cfgcr1: 0x%x, cfgcr2: 0x%x\n",
12058                               pipe_config->ddi_pll_sel,
12059                               pipe_config->dpll_hw_state.ctrl1,
12060                               pipe_config->dpll_hw_state.cfgcr1,
12061                               pipe_config->dpll_hw_state.cfgcr2);
12062         } else if (HAS_DDI(dev)) {
12063                 DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: wrpll: 0x%x spll: 0x%x\n",
12064                               pipe_config->ddi_pll_sel,
12065                               pipe_config->dpll_hw_state.wrpll,
12066                               pipe_config->dpll_hw_state.spll);
12067         } else {
12068                 DRM_DEBUG_KMS("dpll_hw_state: dpll: 0x%x, dpll_md: 0x%x, "
12069                               "fp0: 0x%x, fp1: 0x%x\n",
12070                               pipe_config->dpll_hw_state.dpll,
12071                               pipe_config->dpll_hw_state.dpll_md,
12072                               pipe_config->dpll_hw_state.fp0,
12073                               pipe_config->dpll_hw_state.fp1);
12074         }
12075
12076         DRM_DEBUG_KMS("planes on this crtc\n");
12077         list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
12078                 intel_plane = to_intel_plane(plane);
12079                 if (intel_plane->pipe != crtc->pipe)
12080                         continue;
12081
12082                 state = to_intel_plane_state(plane->state);
12083                 fb = state->base.fb;
12084                 if (!fb) {
12085                         DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d "
12086                                 "disabled, scaler_id = %d\n",
12087                                 plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
12088                                 plane->base.id, intel_plane->pipe,
12089                                 (crtc->base.primary == plane) ? 0 : intel_plane->plane + 1,
12090                                 drm_plane_index(plane), state->scaler_id);
12091                         continue;
12092                 }
12093
12094                 DRM_DEBUG_KMS("%s PLANE:%d plane: %u.%u idx: %d enabled",
12095                         plane->type == DRM_PLANE_TYPE_CURSOR ? "CURSOR" : "STANDARD",
12096                         plane->base.id, intel_plane->pipe,
12097                         crtc->base.primary == plane ? 0 : intel_plane->plane + 1,
12098                         drm_plane_index(plane));
12099                 DRM_DEBUG_KMS("\tFB:%d, fb = %ux%u format = 0x%x",
12100                         fb->base.id, fb->width, fb->height, fb->pixel_format);
12101                 DRM_DEBUG_KMS("\tscaler:%d src (%u, %u) %ux%u dst (%u, %u) %ux%u\n",
12102                         state->scaler_id,
12103                         state->src.x1 >> 16, state->src.y1 >> 16,
12104                         drm_rect_width(&state->src) >> 16,
12105                         drm_rect_height(&state->src) >> 16,
12106                         state->dst.x1, state->dst.y1,
12107                         drm_rect_width(&state->dst), drm_rect_height(&state->dst));
12108         }
12109 }
12110
12111 static bool check_digital_port_conflicts(struct drm_atomic_state *state)
12112 {
12113         struct drm_device *dev = state->dev;
12114         struct intel_encoder *encoder;
12115         struct drm_connector *connector;
12116         struct drm_connector_state *connector_state;
12117         unsigned int used_ports = 0;
12118         int i;
12119
12120         /*
12121          * Walk the connector list instead of the encoder
12122          * list to detect the problem on ddi platforms
12123          * where there's just one encoder per digital port.
12124          */
12125         for_each_connector_in_state(state, connector, connector_state, i) {
12126                 if (!connector_state->best_encoder)
12127                         continue;
12128
12129                 encoder = to_intel_encoder(connector_state->best_encoder);
12130
12131                 WARN_ON(!connector_state->crtc);
12132
12133                 switch (encoder->type) {
12134                         unsigned int port_mask;
12135                 case INTEL_OUTPUT_UNKNOWN:
12136                         if (WARN_ON(!HAS_DDI(dev)))
12137                                 break;
12138                 case INTEL_OUTPUT_DISPLAYPORT:
12139                 case INTEL_OUTPUT_HDMI:
12140                 case INTEL_OUTPUT_EDP:
12141                         port_mask = 1 << enc_to_dig_port(&encoder->base)->port;
12142
12143                         /* the same port mustn't appear more than once */
12144                         if (used_ports & port_mask)
12145                                 return false;
12146
12147                         used_ports |= port_mask;
12148                 default:
12149                         break;
12150                 }
12151         }
12152
12153         return true;
12154 }
12155
12156 static void
12157 clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
12158 {
12159         struct drm_crtc_state tmp_state;
12160         struct intel_crtc_scaler_state scaler_state;
12161         struct intel_dpll_hw_state dpll_hw_state;
12162         enum intel_dpll_id shared_dpll;
12163         uint32_t ddi_pll_sel;
12164         bool force_thru;
12165
12166         /* FIXME: before the switch to atomic started, a new pipe_config was
12167          * kzalloc'd. Code that depends on any field being zero should be
12168          * fixed, so that the crtc_state can be safely duplicated. For now,
12169          * only fields that are know to not cause problems are preserved. */
12170
12171         tmp_state = crtc_state->base;
12172         scaler_state = crtc_state->scaler_state;
12173         shared_dpll = crtc_state->shared_dpll;
12174         dpll_hw_state = crtc_state->dpll_hw_state;
12175         ddi_pll_sel = crtc_state->ddi_pll_sel;
12176         force_thru = crtc_state->pch_pfit.force_thru;
12177
12178         memset(crtc_state, 0, sizeof *crtc_state);
12179
12180         crtc_state->base = tmp_state;
12181         crtc_state->scaler_state = scaler_state;
12182         crtc_state->shared_dpll = shared_dpll;
12183         crtc_state->dpll_hw_state = dpll_hw_state;
12184         crtc_state->ddi_pll_sel = ddi_pll_sel;
12185         crtc_state->pch_pfit.force_thru = force_thru;
12186 }
12187
12188 static int
12189 intel_modeset_pipe_config(struct drm_crtc *crtc,
12190                           struct intel_crtc_state *pipe_config)
12191 {
12192         struct drm_atomic_state *state = pipe_config->base.state;
12193         struct intel_encoder *encoder;
12194         struct drm_connector *connector;
12195         struct drm_connector_state *connector_state;
12196         int base_bpp, ret = -EINVAL;
12197         int i;
12198         bool retry = true;
12199
12200         clear_intel_crtc_state(pipe_config);
12201
12202         pipe_config->cpu_transcoder =
12203                 (enum transcoder) to_intel_crtc(crtc)->pipe;
12204
12205         /*
12206          * Sanitize sync polarity flags based on requested ones. If neither
12207          * positive or negative polarity is requested, treat this as meaning
12208          * negative polarity.
12209          */
12210         if (!(pipe_config->base.adjusted_mode.flags &
12211               (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
12212                 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
12213
12214         if (!(pipe_config->base.adjusted_mode.flags &
12215               (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
12216                 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
12217
12218         base_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
12219                                              pipe_config);
12220         if (base_bpp < 0)
12221                 goto fail;
12222
12223         /*
12224          * Determine the real pipe dimensions. Note that stereo modes can
12225          * increase the actual pipe size due to the frame doubling and
12226          * insertion of additional space for blanks between the frame. This
12227          * is stored in the crtc timings. We use the requested mode to do this
12228          * computation to clearly distinguish it from the adjusted mode, which
12229          * can be changed by the connectors in the below retry loop.
12230          */
12231         drm_crtc_get_hv_timing(&pipe_config->base.mode,
12232                                &pipe_config->pipe_src_w,
12233                                &pipe_config->pipe_src_h);
12234
12235 encoder_retry:
12236         /* Ensure the port clock defaults are reset when retrying. */
12237         pipe_config->port_clock = 0;
12238         pipe_config->pixel_multiplier = 1;
12239
12240         /* Fill in default crtc timings, allow encoders to overwrite them. */
12241         drm_mode_set_crtcinfo(&pipe_config->base.adjusted_mode,
12242                               CRTC_STEREO_DOUBLE);
12243
12244         /* Pass our mode to the connectors and the CRTC to give them a chance to
12245          * adjust it according to limitations or connector properties, and also
12246          * a chance to reject the mode entirely.
12247          */
12248         for_each_connector_in_state(state, connector, connector_state, i) {
12249                 if (connector_state->crtc != crtc)
12250                         continue;
12251
12252                 encoder = to_intel_encoder(connector_state->best_encoder);
12253
12254                 if (!(encoder->compute_config(encoder, pipe_config))) {
12255                         DRM_DEBUG_KMS("Encoder config failure\n");
12256                         goto fail;
12257                 }
12258         }
12259
12260         /* Set default port clock if not overwritten by the encoder. Needs to be
12261          * done afterwards in case the encoder adjusts the mode. */
12262         if (!pipe_config->port_clock)
12263                 pipe_config->port_clock = pipe_config->base.adjusted_mode.crtc_clock
12264                         * pipe_config->pixel_multiplier;
12265
12266         ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
12267         if (ret < 0) {
12268                 DRM_DEBUG_KMS("CRTC fixup failed\n");
12269                 goto fail;
12270         }
12271
12272         if (ret == RETRY) {
12273                 if (WARN(!retry, "loop in pipe configuration computation\n")) {
12274                         ret = -EINVAL;
12275                         goto fail;
12276                 }
12277
12278                 DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
12279                 retry = false;
12280                 goto encoder_retry;
12281         }
12282
12283         /* Dithering seems to not pass-through bits correctly when it should, so
12284          * only enable it on 6bpc panels. */
12285         pipe_config->dither = pipe_config->pipe_bpp == 6*3;
12286         DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
12287                       base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
12288
12289 fail:
12290         return ret;
12291 }
12292
12293 static void
12294 intel_modeset_update_crtc_state(struct drm_atomic_state *state)
12295 {
12296         struct drm_crtc *crtc;
12297         struct drm_crtc_state *crtc_state;
12298         int i;
12299
12300         /* Double check state. */
12301         for_each_crtc_in_state(state, crtc, crtc_state, i) {
12302                 to_intel_crtc(crtc)->config = to_intel_crtc_state(crtc->state);
12303
12304                 /* Update hwmode for vblank functions */
12305                 if (crtc->state->active)
12306                         crtc->hwmode = crtc->state->adjusted_mode;
12307                 else
12308                         crtc->hwmode.crtc_clock = 0;
12309         }
12310 }
12311
12312 static bool intel_fuzzy_clock_check(int clock1, int clock2)
12313 {
12314         int diff;
12315
12316         if (clock1 == clock2)
12317                 return true;
12318
12319         if (!clock1 || !clock2)
12320                 return false;
12321
12322         diff = abs(clock1 - clock2);
12323
12324         if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
12325                 return true;
12326
12327         return false;
12328 }
12329
12330 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
12331         list_for_each_entry((intel_crtc), \
12332                             &(dev)->mode_config.crtc_list, \
12333                             base.head) \
12334                 if (mask & (1 <<(intel_crtc)->pipe))
12335
12336 static bool
12337 intel_compare_m_n(unsigned int m, unsigned int n,
12338                   unsigned int m2, unsigned int n2,
12339                   bool exact)
12340 {
12341         if (m == m2 && n == n2)
12342                 return true;
12343
12344         if (exact || !m || !n || !m2 || !n2)
12345                 return false;
12346
12347         BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX);
12348
12349         if (m > m2) {
12350                 while (m > m2) {
12351                         m2 <<= 1;
12352                         n2 <<= 1;
12353                 }
12354         } else if (m < m2) {
12355                 while (m < m2) {
12356                         m <<= 1;
12357                         n <<= 1;
12358                 }
12359         }
12360
12361         return m == m2 && n == n2;
12362 }
12363
12364 static bool
12365 intel_compare_link_m_n(const struct intel_link_m_n *m_n,
12366                        struct intel_link_m_n *m2_n2,
12367                        bool adjust)
12368 {
12369         if (m_n->tu == m2_n2->tu &&
12370             intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
12371                               m2_n2->gmch_m, m2_n2->gmch_n, !adjust) &&
12372             intel_compare_m_n(m_n->link_m, m_n->link_n,
12373                               m2_n2->link_m, m2_n2->link_n, !adjust)) {
12374                 if (adjust)
12375                         *m2_n2 = *m_n;
12376
12377                 return true;
12378         }
12379
12380         return false;
12381 }
12382
12383 static bool
12384 intel_pipe_config_compare(struct drm_device *dev,
12385                           struct intel_crtc_state *current_config,
12386                           struct intel_crtc_state *pipe_config,
12387                           bool adjust)
12388 {
12389         bool ret = true;
12390
12391 #define INTEL_ERR_OR_DBG_KMS(fmt, ...) \
12392         do { \
12393                 if (!adjust) \
12394                         DRM_ERROR(fmt, ##__VA_ARGS__); \
12395                 else \
12396                         DRM_DEBUG_KMS(fmt, ##__VA_ARGS__); \
12397         } while (0)
12398
12399 #define PIPE_CONF_CHECK_X(name) \
12400         if (current_config->name != pipe_config->name) { \
12401                 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12402                           "(expected 0x%08x, found 0x%08x)\n", \
12403                           current_config->name, \
12404                           pipe_config->name); \
12405                 ret = false; \
12406         }
12407
12408 #define PIPE_CONF_CHECK_I(name) \
12409         if (current_config->name != pipe_config->name) { \
12410                 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12411                           "(expected %i, found %i)\n", \
12412                           current_config->name, \
12413                           pipe_config->name); \
12414                 ret = false; \
12415         }
12416
12417 #define PIPE_CONF_CHECK_M_N(name) \
12418         if (!intel_compare_link_m_n(&current_config->name, \
12419                                     &pipe_config->name,\
12420                                     adjust)) { \
12421                 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12422                           "(expected tu %i gmch %i/%i link %i/%i, " \
12423                           "found tu %i, gmch %i/%i link %i/%i)\n", \
12424                           current_config->name.tu, \
12425                           current_config->name.gmch_m, \
12426                           current_config->name.gmch_n, \
12427                           current_config->name.link_m, \
12428                           current_config->name.link_n, \
12429                           pipe_config->name.tu, \
12430                           pipe_config->name.gmch_m, \
12431                           pipe_config->name.gmch_n, \
12432                           pipe_config->name.link_m, \
12433                           pipe_config->name.link_n); \
12434                 ret = false; \
12435         }
12436
12437 #define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) \
12438         if (!intel_compare_link_m_n(&current_config->name, \
12439                                     &pipe_config->name, adjust) && \
12440             !intel_compare_link_m_n(&current_config->alt_name, \
12441                                     &pipe_config->name, adjust)) { \
12442                 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12443                           "(expected tu %i gmch %i/%i link %i/%i, " \
12444                           "or tu %i gmch %i/%i link %i/%i, " \
12445                           "found tu %i, gmch %i/%i link %i/%i)\n", \
12446                           current_config->name.tu, \
12447                           current_config->name.gmch_m, \
12448                           current_config->name.gmch_n, \
12449                           current_config->name.link_m, \
12450                           current_config->name.link_n, \
12451                           current_config->alt_name.tu, \
12452                           current_config->alt_name.gmch_m, \
12453                           current_config->alt_name.gmch_n, \
12454                           current_config->alt_name.link_m, \
12455                           current_config->alt_name.link_n, \
12456                           pipe_config->name.tu, \
12457                           pipe_config->name.gmch_m, \
12458                           pipe_config->name.gmch_n, \
12459                           pipe_config->name.link_m, \
12460                           pipe_config->name.link_n); \
12461                 ret = false; \
12462         }
12463
12464 /* This is required for BDW+ where there is only one set of registers for
12465  * switching between high and low RR.
12466  * This macro can be used whenever a comparison has to be made between one
12467  * hw state and multiple sw state variables.
12468  */
12469 #define PIPE_CONF_CHECK_I_ALT(name, alt_name) \
12470         if ((current_config->name != pipe_config->name) && \
12471                 (current_config->alt_name != pipe_config->name)) { \
12472                         INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12473                                   "(expected %i or %i, found %i)\n", \
12474                                   current_config->name, \
12475                                   current_config->alt_name, \
12476                                   pipe_config->name); \
12477                         ret = false; \
12478         }
12479
12480 #define PIPE_CONF_CHECK_FLAGS(name, mask)       \
12481         if ((current_config->name ^ pipe_config->name) & (mask)) { \
12482                 INTEL_ERR_OR_DBG_KMS("mismatch in " #name "(" #mask ") " \
12483                           "(expected %i, found %i)\n", \
12484                           current_config->name & (mask), \
12485                           pipe_config->name & (mask)); \
12486                 ret = false; \
12487         }
12488
12489 #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
12490         if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
12491                 INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
12492                           "(expected %i, found %i)\n", \
12493                           current_config->name, \
12494                           pipe_config->name); \
12495                 ret = false; \
12496         }
12497
12498 #define PIPE_CONF_QUIRK(quirk)  \
12499         ((current_config->quirks | pipe_config->quirks) & (quirk))
12500
12501         PIPE_CONF_CHECK_I(cpu_transcoder);
12502
12503         PIPE_CONF_CHECK_I(has_pch_encoder);
12504         PIPE_CONF_CHECK_I(fdi_lanes);
12505         PIPE_CONF_CHECK_M_N(fdi_m_n);
12506
12507         PIPE_CONF_CHECK_I(has_dp_encoder);
12508         PIPE_CONF_CHECK_I(lane_count);
12509
12510         if (INTEL_INFO(dev)->gen < 8) {
12511                 PIPE_CONF_CHECK_M_N(dp_m_n);
12512
12513                 if (current_config->has_drrs)
12514                         PIPE_CONF_CHECK_M_N(dp_m2_n2);
12515         } else
12516                 PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);
12517
12518         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
12519         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
12520         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_start);
12521         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_end);
12522         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_start);
12523         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_end);
12524
12525         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vdisplay);
12526         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vtotal);
12527         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_start);
12528         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_end);
12529         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_start);
12530         PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_end);
12531
12532         PIPE_CONF_CHECK_I(pixel_multiplier);
12533         PIPE_CONF_CHECK_I(has_hdmi_sink);
12534         if ((INTEL_INFO(dev)->gen < 8 && !IS_HASWELL(dev)) ||
12535             IS_VALLEYVIEW(dev))
12536                 PIPE_CONF_CHECK_I(limited_color_range);
12537         PIPE_CONF_CHECK_I(has_infoframe);
12538
12539         PIPE_CONF_CHECK_I(has_audio);
12540
12541         PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12542                               DRM_MODE_FLAG_INTERLACE);
12543
12544         if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
12545                 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12546                                       DRM_MODE_FLAG_PHSYNC);
12547                 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12548                                       DRM_MODE_FLAG_NHSYNC);
12549                 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12550                                       DRM_MODE_FLAG_PVSYNC);
12551                 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
12552                                       DRM_MODE_FLAG_NVSYNC);
12553         }
12554
12555         PIPE_CONF_CHECK_X(gmch_pfit.control);
12556         /* pfit ratios are autocomputed by the hw on gen4+ */
12557         if (INTEL_INFO(dev)->gen < 4)
12558                 PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
12559         PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits);
12560
12561         if (!adjust) {
12562                 PIPE_CONF_CHECK_I(pipe_src_w);
12563                 PIPE_CONF_CHECK_I(pipe_src_h);
12564
12565                 PIPE_CONF_CHECK_I(pch_pfit.enabled);
12566                 if (current_config->pch_pfit.enabled) {
12567                         PIPE_CONF_CHECK_X(pch_pfit.pos);
12568                         PIPE_CONF_CHECK_X(pch_pfit.size);
12569                 }
12570
12571                 PIPE_CONF_CHECK_I(scaler_state.scaler_id);
12572         }
12573
12574         /* BDW+ don't expose a synchronous way to read the state */
12575         if (IS_HASWELL(dev))
12576                 PIPE_CONF_CHECK_I(ips_enabled);
12577
12578         PIPE_CONF_CHECK_I(double_wide);
12579
12580         PIPE_CONF_CHECK_X(ddi_pll_sel);
12581
12582         PIPE_CONF_CHECK_I(shared_dpll);
12583         PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
12584         PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
12585         PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
12586         PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
12587         PIPE_CONF_CHECK_X(dpll_hw_state.wrpll);
12588         PIPE_CONF_CHECK_X(dpll_hw_state.spll);
12589         PIPE_CONF_CHECK_X(dpll_hw_state.ctrl1);
12590         PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1);
12591         PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2);
12592
12593         if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
12594                 PIPE_CONF_CHECK_I(pipe_bpp);
12595
12596         PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.crtc_clock);
12597         PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
12598
12599 #undef PIPE_CONF_CHECK_X
12600 #undef PIPE_CONF_CHECK_I
12601 #undef PIPE_CONF_CHECK_I_ALT
12602 #undef PIPE_CONF_CHECK_FLAGS
12603 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
12604 #undef PIPE_CONF_QUIRK
12605 #undef INTEL_ERR_OR_DBG_KMS
12606
12607         return ret;
12608 }
12609
12610 static void check_wm_state(struct drm_device *dev)
12611 {
12612         struct drm_i915_private *dev_priv = dev->dev_private;
12613         struct skl_ddb_allocation hw_ddb, *sw_ddb;
12614         struct intel_crtc *intel_crtc;
12615         int plane;
12616
12617         if (INTEL_INFO(dev)->gen < 9)
12618                 return;
12619
12620         skl_ddb_get_hw_state(dev_priv, &hw_ddb);
12621         sw_ddb = &dev_priv->wm.skl_hw.ddb;
12622
12623         for_each_intel_crtc(dev, intel_crtc) {
12624                 struct skl_ddb_entry *hw_entry, *sw_entry;
12625                 const enum pipe pipe = intel_crtc->pipe;
12626
12627                 if (!intel_crtc->active)
12628                         continue;
12629
12630                 /* planes */
12631                 for_each_plane(dev_priv, pipe, plane) {
12632                         hw_entry = &hw_ddb.plane[pipe][plane];
12633                         sw_entry = &sw_ddb->plane[pipe][plane];
12634
12635                         if (skl_ddb_entry_equal(hw_entry, sw_entry))
12636                                 continue;
12637
12638                         DRM_ERROR("mismatch in DDB state pipe %c plane %d "
12639                                   "(expected (%u,%u), found (%u,%u))\n",
12640                                   pipe_name(pipe), plane + 1,
12641                                   sw_entry->start, sw_entry->end,
12642                                   hw_entry->start, hw_entry->end);
12643                 }
12644
12645                 /* cursor */
12646                 hw_entry = &hw_ddb.plane[pipe][PLANE_CURSOR];
12647                 sw_entry = &sw_ddb->plane[pipe][PLANE_CURSOR];
12648
12649                 if (skl_ddb_entry_equal(hw_entry, sw_entry))
12650                         continue;
12651
12652                 DRM_ERROR("mismatch in DDB state pipe %c cursor "
12653                           "(expected (%u,%u), found (%u,%u))\n",
12654                           pipe_name(pipe),
12655                           sw_entry->start, sw_entry->end,
12656                           hw_entry->start, hw_entry->end);
12657         }
12658 }
12659
12660 static void
12661 check_connector_state(struct drm_device *dev,
12662                       struct drm_atomic_state *old_state)
12663 {
12664         struct drm_connector_state *old_conn_state;
12665         struct drm_connector *connector;
12666         int i;
12667
12668         for_each_connector_in_state(old_state, connector, old_conn_state, i) {
12669                 struct drm_encoder *encoder = connector->encoder;
12670                 struct drm_connector_state *state = connector->state;
12671
12672                 /* This also checks the encoder/connector hw state with the
12673                  * ->get_hw_state callbacks. */
12674                 intel_connector_check_state(to_intel_connector(connector));
12675
12676                 I915_STATE_WARN(state->best_encoder != encoder,
12677                      "connector's atomic encoder doesn't match legacy encoder\n");
12678         }
12679 }
12680
12681 static void
12682 check_encoder_state(struct drm_device *dev)
12683 {
12684         struct intel_encoder *encoder;
12685         struct intel_connector *connector;
12686
12687         for_each_intel_encoder(dev, encoder) {
12688                 bool enabled = false;
12689                 enum pipe pipe;
12690
12691                 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
12692                               encoder->base.base.id,
12693                               encoder->base.name);
12694
12695                 for_each_intel_connector(dev, connector) {
12696                         if (connector->base.state->best_encoder != &encoder->base)
12697                                 continue;
12698                         enabled = true;
12699
12700                         I915_STATE_WARN(connector->base.state->crtc !=
12701                                         encoder->base.crtc,
12702                              "connector's crtc doesn't match encoder crtc\n");
12703                 }
12704
12705                 I915_STATE_WARN(!!encoder->base.crtc != enabled,
12706                      "encoder's enabled state mismatch "
12707                      "(expected %i, found %i)\n",
12708                      !!encoder->base.crtc, enabled);
12709
12710                 if (!encoder->base.crtc) {
12711                         bool active;
12712
12713                         active = encoder->get_hw_state(encoder, &pipe);
12714                         I915_STATE_WARN(active,
12715                              "encoder detached but still enabled on pipe %c.\n",
12716                              pipe_name(pipe));
12717                 }
12718         }
12719 }
12720
12721 static void
12722 check_crtc_state(struct drm_device *dev, struct drm_atomic_state *old_state)
12723 {
12724         struct drm_i915_private *dev_priv = dev->dev_private;
12725         struct intel_encoder *encoder;
12726         struct drm_crtc_state *old_crtc_state;
12727         struct drm_crtc *crtc;
12728         int i;
12729
12730         for_each_crtc_in_state(old_state, crtc, old_crtc_state, i) {
12731                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
12732                 struct intel_crtc_state *pipe_config, *sw_config;
12733                 bool active;
12734
12735                 if (!needs_modeset(crtc->state) &&
12736                     !to_intel_crtc_state(crtc->state)->update_pipe)
12737                         continue;
12738
12739                 __drm_atomic_helper_crtc_destroy_state(crtc, old_crtc_state);
12740                 pipe_config = to_intel_crtc_state(old_crtc_state);
12741                 memset(pipe_config, 0, sizeof(*pipe_config));
12742                 pipe_config->base.crtc = crtc;
12743                 pipe_config->base.state = old_state;
12744
12745                 DRM_DEBUG_KMS("[CRTC:%d]\n",
12746                               crtc->base.id);
12747
12748                 active = dev_priv->display.get_pipe_config(intel_crtc,
12749                                                            pipe_config);
12750
12751                 /* hw state is inconsistent with the pipe quirk */
12752                 if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
12753                     (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
12754                         active = crtc->state->active;
12755
12756                 I915_STATE_WARN(crtc->state->active != active,
12757                      "crtc active state doesn't match with hw state "
12758                      "(expected %i, found %i)\n", crtc->state->active, active);
12759
12760                 I915_STATE_WARN(intel_crtc->active != crtc->state->active,
12761                      "transitional active state does not match atomic hw state "
12762                      "(expected %i, found %i)\n", crtc->state->active, intel_crtc->active);
12763
12764                 for_each_encoder_on_crtc(dev, crtc, encoder) {
12765                         enum pipe pipe;
12766
12767                         active = encoder->get_hw_state(encoder, &pipe);
12768                         I915_STATE_WARN(active != crtc->state->active,
12769                                 "[ENCODER:%i] active %i with crtc active %i\n",
12770                                 encoder->base.base.id, active, crtc->state->active);
12771
12772                         I915_STATE_WARN(active && intel_crtc->pipe != pipe,
12773                                         "Encoder connected to wrong pipe %c\n",
12774                                         pipe_name(pipe));
12775
12776                         if (active)
12777                                 encoder->get_config(encoder, pipe_config);
12778                 }
12779
12780                 if (!crtc->state->active)
12781                         continue;
12782
12783                 sw_config = to_intel_crtc_state(crtc->state);
12784                 if (!intel_pipe_config_compare(dev, sw_config,
12785                                                pipe_config, false)) {
12786                         I915_STATE_WARN(1, "pipe state doesn't match!\n");
12787                         intel_dump_pipe_config(intel_crtc, pipe_config,
12788                                                "[hw state]");
12789                         intel_dump_pipe_config(intel_crtc, sw_config,
12790                                                "[sw state]");
12791                 }
12792         }
12793 }
12794
12795 static void
12796 check_shared_dpll_state(struct drm_device *dev)
12797 {
12798         struct drm_i915_private *dev_priv = dev->dev_private;
12799         struct intel_crtc *crtc;
12800         struct intel_dpll_hw_state dpll_hw_state;
12801         int i;
12802
12803         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
12804                 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
12805                 int enabled_crtcs = 0, active_crtcs = 0;
12806                 bool active;
12807
12808                 memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
12809
12810                 DRM_DEBUG_KMS("%s\n", pll->name);
12811
12812                 active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
12813
12814                 I915_STATE_WARN(pll->active > hweight32(pll->config.crtc_mask),
12815                      "more active pll users than references: %i vs %i\n",
12816                      pll->active, hweight32(pll->config.crtc_mask));
12817                 I915_STATE_WARN(pll->active && !pll->on,
12818                      "pll in active use but not on in sw tracking\n");
12819                 I915_STATE_WARN(pll->on && !pll->active,
12820                      "pll in on but not on in use in sw tracking\n");
12821                 I915_STATE_WARN(pll->on != active,
12822                      "pll on state mismatch (expected %i, found %i)\n",
12823                      pll->on, active);
12824
12825                 for_each_intel_crtc(dev, crtc) {
12826                         if (crtc->base.state->enable && intel_crtc_to_shared_dpll(crtc) == pll)
12827                                 enabled_crtcs++;
12828                         if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
12829                                 active_crtcs++;
12830                 }
12831                 I915_STATE_WARN(pll->active != active_crtcs,
12832                      "pll active crtcs mismatch (expected %i, found %i)\n",
12833                      pll->active, active_crtcs);
12834                 I915_STATE_WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
12835                      "pll enabled crtcs mismatch (expected %i, found %i)\n",
12836                      hweight32(pll->config.crtc_mask), enabled_crtcs);
12837
12838                 I915_STATE_WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
12839                                        sizeof(dpll_hw_state)),
12840                      "pll hw state mismatch\n");
12841         }
12842 }
12843
12844 static void
12845 intel_modeset_check_state(struct drm_device *dev,
12846                           struct drm_atomic_state *old_state)
12847 {
12848         check_wm_state(dev);
12849         check_connector_state(dev, old_state);
12850         check_encoder_state(dev);
12851         check_crtc_state(dev, old_state);
12852         check_shared_dpll_state(dev);
12853 }
12854
12855 void ironlake_check_encoder_dotclock(const struct intel_crtc_state *pipe_config,
12856                                      int dotclock)
12857 {
12858         /*
12859          * FDI already provided one idea for the dotclock.
12860          * Yell if the encoder disagrees.
12861          */
12862         WARN(!intel_fuzzy_clock_check(pipe_config->base.adjusted_mode.crtc_clock, dotclock),
12863              "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
12864              pipe_config->base.adjusted_mode.crtc_clock, dotclock);
12865 }
12866
12867 static void update_scanline_offset(struct intel_crtc *crtc)
12868 {
12869         struct drm_device *dev = crtc->base.dev;
12870
12871         /*
12872          * The scanline counter increments at the leading edge of hsync.
12873          *
12874          * On most platforms it starts counting from vtotal-1 on the
12875          * first active line. That means the scanline counter value is
12876          * always one less than what we would expect. Ie. just after
12877          * start of vblank, which also occurs at start of hsync (on the
12878          * last active line), the scanline counter will read vblank_start-1.
12879          *
12880          * On gen2 the scanline counter starts counting from 1 instead
12881          * of vtotal-1, so we have to subtract one (or rather add vtotal-1
12882          * to keep the value positive), instead of adding one.
12883          *
12884          * On HSW+ the behaviour of the scanline counter depends on the output
12885          * type. For DP ports it behaves like most other platforms, but on HDMI
12886          * there's an extra 1 line difference. So we need to add two instead of
12887          * one to the value.
12888          */
12889         if (IS_GEN2(dev)) {
12890                 const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
12891                 int vtotal;
12892
12893                 vtotal = adjusted_mode->crtc_vtotal;
12894                 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
12895                         vtotal /= 2;
12896
12897                 crtc->scanline_offset = vtotal - 1;
12898         } else if (HAS_DDI(dev) &&
12899                    intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
12900                 crtc->scanline_offset = 2;
12901         } else
12902                 crtc->scanline_offset = 1;
12903 }
12904
12905 static void intel_modeset_clear_plls(struct drm_atomic_state *state)
12906 {
12907         struct drm_device *dev = state->dev;
12908         struct drm_i915_private *dev_priv = to_i915(dev);
12909         struct intel_shared_dpll_config *shared_dpll = NULL;
12910         struct intel_crtc *intel_crtc;
12911         struct intel_crtc_state *intel_crtc_state;
12912         struct drm_crtc *crtc;
12913         struct drm_crtc_state *crtc_state;
12914         int i;
12915
12916         if (!dev_priv->display.crtc_compute_clock)
12917                 return;
12918
12919         for_each_crtc_in_state(state, crtc, crtc_state, i) {
12920                 int dpll;
12921
12922                 intel_crtc = to_intel_crtc(crtc);
12923                 intel_crtc_state = to_intel_crtc_state(crtc_state);
12924                 dpll = intel_crtc_state->shared_dpll;
12925
12926                 if (!needs_modeset(crtc_state) || dpll == DPLL_ID_PRIVATE)
12927                         continue;
12928
12929                 intel_crtc_state->shared_dpll = DPLL_ID_PRIVATE;
12930
12931                 if (!shared_dpll)
12932                         shared_dpll = intel_atomic_get_shared_dpll_state(state);
12933
12934                 shared_dpll[dpll].crtc_mask &= ~(1 << intel_crtc->pipe);
12935         }
12936 }
12937
12938 /*
12939  * This implements the workaround described in the "notes" section of the mode
12940  * set sequence documentation. When going from no pipes or single pipe to
12941  * multiple pipes, and planes are enabled after the pipe, we need to wait at
12942  * least 2 vblanks on the first pipe before enabling planes on the second pipe.
12943  */
12944 static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
12945 {
12946         struct drm_crtc_state *crtc_state;
12947         struct intel_crtc *intel_crtc;
12948         struct drm_crtc *crtc;
12949         struct intel_crtc_state *first_crtc_state = NULL;
12950         struct intel_crtc_state *other_crtc_state = NULL;
12951         enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
12952         int i;
12953
12954         /* look at all crtc's that are going to be enabled in during modeset */
12955         for_each_crtc_in_state(state, crtc, crtc_state, i) {
12956                 intel_crtc = to_intel_crtc(crtc);
12957
12958                 if (!crtc_state->active || !needs_modeset(crtc_state))
12959                         continue;
12960
12961                 if (first_crtc_state) {
12962                         other_crtc_state = to_intel_crtc_state(crtc_state);
12963                         break;
12964                 } else {
12965                         first_crtc_state = to_intel_crtc_state(crtc_state);
12966                         first_pipe = intel_crtc->pipe;
12967                 }
12968         }
12969
12970         /* No workaround needed? */
12971         if (!first_crtc_state)
12972                 return 0;
12973
12974         /* w/a possibly needed, check how many crtc's are already enabled. */
12975         for_each_intel_crtc(state->dev, intel_crtc) {
12976                 struct intel_crtc_state *pipe_config;
12977
12978                 pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
12979                 if (IS_ERR(pipe_config))
12980                         return PTR_ERR(pipe_config);
12981
12982                 pipe_config->hsw_workaround_pipe = INVALID_PIPE;
12983
12984                 if (!pipe_config->base.active ||
12985                     needs_modeset(&pipe_config->base))
12986                         continue;
12987
12988                 /* 2 or more enabled crtcs means no need for w/a */
12989                 if (enabled_pipe != INVALID_PIPE)
12990                         return 0;
12991
12992                 enabled_pipe = intel_crtc->pipe;
12993         }
12994
12995         if (enabled_pipe != INVALID_PIPE)
12996                 first_crtc_state->hsw_workaround_pipe = enabled_pipe;
12997         else if (other_crtc_state)
12998                 other_crtc_state->hsw_workaround_pipe = first_pipe;
12999
13000         return 0;
13001 }
13002
13003 static int intel_modeset_all_pipes(struct drm_atomic_state *state)
13004 {
13005         struct drm_crtc *crtc;
13006         struct drm_crtc_state *crtc_state;
13007         int ret = 0;
13008
13009         /* add all active pipes to the state */
13010         for_each_crtc(state->dev, crtc) {
13011                 crtc_state = drm_atomic_get_crtc_state(state, crtc);
13012                 if (IS_ERR(crtc_state))
13013                         return PTR_ERR(crtc_state);
13014
13015                 if (!crtc_state->active || needs_modeset(crtc_state))
13016                         continue;
13017
13018                 crtc_state->mode_changed = true;
13019
13020                 ret = drm_atomic_add_affected_connectors(state, crtc);
13021                 if (ret)
13022                         break;
13023
13024                 ret = drm_atomic_add_affected_planes(state, crtc);
13025                 if (ret)
13026                         break;
13027         }
13028
13029         return ret;
13030 }
13031
13032 static int intel_modeset_checks(struct drm_atomic_state *state)
13033 {
13034         struct drm_device *dev = state->dev;
13035         struct drm_i915_private *dev_priv = dev->dev_private;
13036         int ret;
13037
13038         if (!check_digital_port_conflicts(state)) {
13039                 DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
13040                 return -EINVAL;
13041         }
13042
13043         /*
13044          * See if the config requires any additional preparation, e.g.
13045          * to adjust global state with pipes off.  We need to do this
13046          * here so we can get the modeset_pipe updated config for the new
13047          * mode set on this crtc.  For other crtcs we need to use the
13048          * adjusted_mode bits in the crtc directly.
13049          */
13050         if (dev_priv->display.modeset_calc_cdclk) {
13051                 unsigned int cdclk;
13052
13053                 ret = dev_priv->display.modeset_calc_cdclk(state);
13054
13055                 cdclk = to_intel_atomic_state(state)->cdclk;
13056                 if (!ret && cdclk != dev_priv->cdclk_freq)
13057                         ret = intel_modeset_all_pipes(state);
13058
13059                 if (ret < 0)
13060                         return ret;
13061         } else
13062                 to_intel_atomic_state(state)->cdclk = dev_priv->cdclk_freq;
13063
13064         intel_modeset_clear_plls(state);
13065
13066         if (IS_HASWELL(dev))
13067                 return haswell_mode_set_planes_workaround(state);
13068
13069         return 0;
13070 }
13071
13072 /**
13073  * intel_atomic_check - validate state object
13074  * @dev: drm device
13075  * @state: state to validate
13076  */
13077 static int intel_atomic_check(struct drm_device *dev,
13078                               struct drm_atomic_state *state)
13079 {
13080         struct drm_crtc *crtc;
13081         struct drm_crtc_state *crtc_state;
13082         int ret, i;
13083         bool any_ms = false;
13084
13085         ret = drm_atomic_helper_check_modeset(dev, state);
13086         if (ret)
13087                 return ret;
13088
13089         for_each_crtc_in_state(state, crtc, crtc_state, i) {
13090                 struct intel_crtc_state *pipe_config =
13091                         to_intel_crtc_state(crtc_state);
13092
13093                 memset(&to_intel_crtc(crtc)->atomic, 0,
13094                        sizeof(struct intel_crtc_atomic_commit));
13095
13096                 /* Catch I915_MODE_FLAG_INHERITED */
13097                 if (crtc_state->mode.private_flags != crtc->state->mode.private_flags)
13098                         crtc_state->mode_changed = true;
13099
13100                 if (!crtc_state->enable) {
13101                         if (needs_modeset(crtc_state))
13102                                 any_ms = true;
13103                         continue;
13104                 }
13105
13106                 if (!needs_modeset(crtc_state))
13107                         continue;
13108
13109                 /* FIXME: For only active_changed we shouldn't need to do any
13110                  * state recomputation at all. */
13111
13112                 ret = drm_atomic_add_affected_connectors(state, crtc);
13113                 if (ret)
13114                         return ret;
13115
13116                 ret = intel_modeset_pipe_config(crtc, pipe_config);
13117                 if (ret)
13118                         return ret;
13119
13120                 if (i915.fastboot &&
13121                     intel_pipe_config_compare(state->dev,
13122                                         to_intel_crtc_state(crtc->state),
13123                                         pipe_config, true)) {
13124                         crtc_state->mode_changed = false;
13125                         to_intel_crtc_state(crtc_state)->update_pipe = true;
13126                 }
13127
13128                 if (needs_modeset(crtc_state)) {
13129                         any_ms = true;
13130
13131                         ret = drm_atomic_add_affected_planes(state, crtc);
13132                         if (ret)
13133                                 return ret;
13134                 }
13135
13136                 intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
13137                                        needs_modeset(crtc_state) ?
13138                                        "[modeset]" : "[fastset]");
13139         }
13140
13141         if (any_ms) {
13142                 ret = intel_modeset_checks(state);
13143
13144                 if (ret)
13145                         return ret;
13146         } else
13147                 to_intel_atomic_state(state)->cdclk =
13148                         to_i915(state->dev)->cdclk_freq;
13149
13150         return drm_atomic_helper_check_planes(state->dev, state);
13151 }
13152
13153 /**
13154  * intel_atomic_commit - commit validated state object
13155  * @dev: DRM device
13156  * @state: the top-level driver state object
13157  * @async: asynchronous commit
13158  *
13159  * This function commits a top-level state object that has been validated
13160  * with drm_atomic_helper_check().
13161  *
13162  * FIXME:  Atomic modeset support for i915 is not yet complete.  At the moment
13163  * we can only handle plane-related operations and do not yet support
13164  * asynchronous commit.
13165  *
13166  * RETURNS
13167  * Zero for success or -errno.
13168  */
13169 static int intel_atomic_commit(struct drm_device *dev,
13170                                struct drm_atomic_state *state,
13171                                bool async)
13172 {
13173         struct drm_i915_private *dev_priv = dev->dev_private;
13174         struct drm_crtc *crtc;
13175         struct drm_crtc_state *crtc_state;
13176         int ret = 0;
13177         int i;
13178         bool any_ms = false;
13179
13180         if (async) {
13181                 DRM_DEBUG_KMS("i915 does not yet support async commit\n");
13182                 return -EINVAL;
13183         }
13184
13185         ret = drm_atomic_helper_prepare_planes(dev, state);
13186         if (ret)
13187                 return ret;
13188
13189         drm_atomic_helper_swap_state(dev, state);
13190
13191         for_each_crtc_in_state(state, crtc, crtc_state, i) {
13192                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13193
13194                 if (!needs_modeset(crtc->state))
13195                         continue;
13196
13197                 any_ms = true;
13198                 intel_pre_plane_update(intel_crtc);
13199
13200                 if (crtc_state->active) {
13201                         intel_crtc_disable_planes(crtc, crtc_state->plane_mask);
13202                         dev_priv->display.crtc_disable(crtc);
13203                         intel_crtc->active = false;
13204                         intel_disable_shared_dpll(intel_crtc);
13205                 }
13206         }
13207
13208         /* Only after disabling all output pipelines that will be changed can we
13209          * update the the output configuration. */
13210         intel_modeset_update_crtc_state(state);
13211
13212         if (any_ms) {
13213                 intel_shared_dpll_commit(state);
13214
13215                 drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
13216                 modeset_update_crtc_power_domains(state);
13217         }
13218
13219         /* Now enable the clocks, plane, pipe, and connectors that we set up. */
13220         for_each_crtc_in_state(state, crtc, crtc_state, i) {
13221                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13222                 bool modeset = needs_modeset(crtc->state);
13223                 bool update_pipe = !modeset &&
13224                         to_intel_crtc_state(crtc->state)->update_pipe;
13225                 unsigned long put_domains = 0;
13226
13227                 if (modeset && crtc->state->active) {
13228                         update_scanline_offset(to_intel_crtc(crtc));
13229                         dev_priv->display.crtc_enable(crtc);
13230                 }
13231
13232                 if (update_pipe) {
13233                         put_domains = modeset_get_crtc_power_domains(crtc);
13234
13235                         /* make sure intel_modeset_check_state runs */
13236                         any_ms = true;
13237                 }
13238
13239                 if (!modeset)
13240                         intel_pre_plane_update(intel_crtc);
13241
13242                 drm_atomic_helper_commit_planes_on_crtc(crtc_state);
13243
13244                 if (put_domains)
13245                         modeset_put_power_domains(dev_priv, put_domains);
13246
13247                 intel_post_plane_update(intel_crtc);
13248         }
13249
13250         /* FIXME: add subpixel order */
13251
13252         drm_atomic_helper_wait_for_vblanks(dev, state);
13253         drm_atomic_helper_cleanup_planes(dev, state);
13254
13255         if (any_ms)
13256                 intel_modeset_check_state(dev, state);
13257
13258         drm_atomic_state_free(state);
13259
13260         return 0;
13261 }
13262
13263 void intel_crtc_restore_mode(struct drm_crtc *crtc)
13264 {
13265         struct drm_device *dev = crtc->dev;
13266         struct drm_atomic_state *state;
13267         struct drm_crtc_state *crtc_state;
13268         int ret;
13269
13270         state = drm_atomic_state_alloc(dev);
13271         if (!state) {
13272                 DRM_DEBUG_KMS("[CRTC:%d] crtc restore failed, out of memory",
13273                               crtc->base.id);
13274                 return;
13275         }
13276
13277         state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
13278
13279 retry:
13280         crtc_state = drm_atomic_get_crtc_state(state, crtc);
13281         ret = PTR_ERR_OR_ZERO(crtc_state);
13282         if (!ret) {
13283                 if (!crtc_state->active)
13284                         goto out;
13285
13286                 crtc_state->mode_changed = true;
13287                 ret = drm_atomic_commit(state);
13288         }
13289
13290         if (ret == -EDEADLK) {
13291                 drm_atomic_state_clear(state);
13292                 drm_modeset_backoff(state->acquire_ctx);
13293                 goto retry;
13294         }
13295
13296         if (ret)
13297 out:
13298                 drm_atomic_state_free(state);
13299 }
13300
13301 #undef for_each_intel_crtc_masked
13302
13303 static const struct drm_crtc_funcs intel_crtc_funcs = {
13304         .gamma_set = intel_crtc_gamma_set,
13305         .set_config = drm_atomic_helper_set_config,
13306         .destroy = intel_crtc_destroy,
13307         .page_flip = intel_crtc_page_flip,
13308         .atomic_duplicate_state = intel_crtc_duplicate_state,
13309         .atomic_destroy_state = intel_crtc_destroy_state,
13310 };
13311
13312 static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
13313                                       struct intel_shared_dpll *pll,
13314                                       struct intel_dpll_hw_state *hw_state)
13315 {
13316         uint32_t val;
13317
13318         if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PLLS))
13319                 return false;
13320
13321         val = I915_READ(PCH_DPLL(pll->id));
13322         hw_state->dpll = val;
13323         hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
13324         hw_state->fp1 = I915_READ(PCH_FP1(pll->id));
13325
13326         return val & DPLL_VCO_ENABLE;
13327 }
13328
13329 static void ibx_pch_dpll_mode_set(struct drm_i915_private *dev_priv,
13330                                   struct intel_shared_dpll *pll)
13331 {
13332         I915_WRITE(PCH_FP0(pll->id), pll->config.hw_state.fp0);
13333         I915_WRITE(PCH_FP1(pll->id), pll->config.hw_state.fp1);
13334 }
13335
13336 static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
13337                                 struct intel_shared_dpll *pll)
13338 {
13339         /* PCH refclock must be enabled first */
13340         ibx_assert_pch_refclk_enabled(dev_priv);
13341
13342         I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll);
13343
13344         /* Wait for the clocks to stabilize. */
13345         POSTING_READ(PCH_DPLL(pll->id));
13346         udelay(150);
13347
13348         /* The pixel multiplier can only be updated once the
13349          * DPLL is enabled and the clocks are stable.
13350          *
13351          * So write it again.
13352          */
13353         I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll);
13354         POSTING_READ(PCH_DPLL(pll->id));
13355         udelay(200);
13356 }
13357
13358 static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv,
13359                                  struct intel_shared_dpll *pll)
13360 {
13361         struct drm_device *dev = dev_priv->dev;
13362         struct intel_crtc *crtc;
13363
13364         /* Make sure no transcoder isn't still depending on us. */
13365         for_each_intel_crtc(dev, crtc) {
13366                 if (intel_crtc_to_shared_dpll(crtc) == pll)
13367                         assert_pch_transcoder_disabled(dev_priv, crtc->pipe);
13368         }
13369
13370         I915_WRITE(PCH_DPLL(pll->id), 0);
13371         POSTING_READ(PCH_DPLL(pll->id));
13372         udelay(200);
13373 }
13374
13375 static char *ibx_pch_dpll_names[] = {
13376         "PCH DPLL A",
13377         "PCH DPLL B",
13378 };
13379
13380 static void ibx_pch_dpll_init(struct drm_device *dev)
13381 {
13382         struct drm_i915_private *dev_priv = dev->dev_private;
13383         int i;
13384
13385         dev_priv->num_shared_dpll = 2;
13386
13387         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
13388                 dev_priv->shared_dplls[i].id = i;
13389                 dev_priv->shared_dplls[i].name = ibx_pch_dpll_names[i];
13390                 dev_priv->shared_dplls[i].mode_set = ibx_pch_dpll_mode_set;
13391                 dev_priv->shared_dplls[i].enable = ibx_pch_dpll_enable;
13392                 dev_priv->shared_dplls[i].disable = ibx_pch_dpll_disable;
13393                 dev_priv->shared_dplls[i].get_hw_state =
13394                         ibx_pch_dpll_get_hw_state;
13395         }
13396 }
13397
13398 static void intel_shared_dpll_init(struct drm_device *dev)
13399 {
13400         struct drm_i915_private *dev_priv = dev->dev_private;
13401
13402         if (HAS_DDI(dev))
13403                 intel_ddi_pll_init(dev);
13404         else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
13405                 ibx_pch_dpll_init(dev);
13406         else
13407                 dev_priv->num_shared_dpll = 0;
13408
13409         BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
13410 }
13411
13412 /**
13413  * intel_prepare_plane_fb - Prepare fb for usage on plane
13414  * @plane: drm plane to prepare for
13415  * @fb: framebuffer to prepare for presentation
13416  *
13417  * Prepares a framebuffer for usage on a display plane.  Generally this
13418  * involves pinning the underlying object and updating the frontbuffer tracking
13419  * bits.  Some older platforms need special physical address handling for
13420  * cursor planes.
13421  *
13422  * Returns 0 on success, negative error code on failure.
13423  */
13424 int
13425 intel_prepare_plane_fb(struct drm_plane *plane,
13426                        const struct drm_plane_state *new_state)
13427 {
13428         struct drm_device *dev = plane->dev;
13429         struct drm_framebuffer *fb = new_state->fb;
13430         struct intel_plane *intel_plane = to_intel_plane(plane);
13431         struct drm_i915_gem_object *obj = intel_fb_obj(fb);
13432         struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
13433         int ret = 0;
13434
13435         if (!obj)
13436                 return 0;
13437
13438         mutex_lock(&dev->struct_mutex);
13439
13440         if (plane->type == DRM_PLANE_TYPE_CURSOR &&
13441             INTEL_INFO(dev)->cursor_needs_physical) {
13442                 int align = IS_I830(dev) ? 16 * 1024 : 256;
13443                 ret = i915_gem_object_attach_phys(obj, align);
13444                 if (ret)
13445                         DRM_DEBUG_KMS("failed to attach phys object\n");
13446         } else {
13447                 ret = intel_pin_and_fence_fb_obj(plane, fb, new_state, NULL, NULL);
13448         }
13449
13450         if (ret == 0)
13451                 i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
13452
13453         mutex_unlock(&dev->struct_mutex);
13454
13455         return ret;
13456 }
13457
13458 /**
13459  * intel_cleanup_plane_fb - Cleans up an fb after plane use
13460  * @plane: drm plane to clean up for
13461  * @fb: old framebuffer that was on plane
13462  *
13463  * Cleans up a framebuffer that has just been removed from a plane.
13464  */
13465 void
13466 intel_cleanup_plane_fb(struct drm_plane *plane,
13467                        const struct drm_plane_state *old_state)
13468 {
13469         struct drm_device *dev = plane->dev;
13470         struct drm_i915_gem_object *obj = intel_fb_obj(old_state->fb);
13471
13472         if (!obj)
13473                 return;
13474
13475         if (plane->type != DRM_PLANE_TYPE_CURSOR ||
13476             !INTEL_INFO(dev)->cursor_needs_physical) {
13477                 mutex_lock(&dev->struct_mutex);
13478                 intel_unpin_fb_obj(old_state->fb, old_state);
13479                 mutex_unlock(&dev->struct_mutex);
13480         }
13481 }
13482
13483 int
13484 skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
13485 {
13486         int max_scale;
13487         struct drm_device *dev;
13488         struct drm_i915_private *dev_priv;
13489         int crtc_clock, cdclk;
13490
13491         if (!intel_crtc || !crtc_state)
13492                 return DRM_PLANE_HELPER_NO_SCALING;
13493
13494         dev = intel_crtc->base.dev;
13495         dev_priv = dev->dev_private;
13496         crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
13497         cdclk = to_intel_atomic_state(crtc_state->base.state)->cdclk;
13498
13499         if (!crtc_clock || !cdclk)
13500                 return DRM_PLANE_HELPER_NO_SCALING;
13501
13502         /*
13503          * skl max scale is lower of:
13504          *    close to 3 but not 3, -1 is for that purpose
13505          *            or
13506          *    cdclk/crtc_clock
13507          */
13508         max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock));
13509
13510         return max_scale;
13511 }
13512
13513 static int
13514 intel_check_primary_plane(struct drm_plane *plane,
13515                           struct intel_crtc_state *crtc_state,
13516                           struct intel_plane_state *state)
13517 {
13518         struct drm_crtc *crtc = state->base.crtc;
13519         struct drm_framebuffer *fb = state->base.fb;
13520         int min_scale = DRM_PLANE_HELPER_NO_SCALING;
13521         int max_scale = DRM_PLANE_HELPER_NO_SCALING;
13522         bool can_position = false;
13523
13524         /* use scaler when colorkey is not required */
13525         if (INTEL_INFO(plane->dev)->gen >= 9 &&
13526             state->ckey.flags == I915_SET_COLORKEY_NONE) {
13527                 min_scale = 1;
13528                 max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
13529                 can_position = true;
13530         }
13531
13532         return drm_plane_helper_check_update(plane, crtc, fb, &state->src,
13533                                              &state->dst, &state->clip,
13534                                              min_scale, max_scale,
13535                                              can_position, true,
13536                                              &state->visible);
13537 }
13538
13539 static void
13540 intel_commit_primary_plane(struct drm_plane *plane,
13541                            struct intel_plane_state *state)
13542 {
13543         struct drm_crtc *crtc = state->base.crtc;
13544         struct drm_framebuffer *fb = state->base.fb;
13545         struct drm_device *dev = plane->dev;
13546         struct drm_i915_private *dev_priv = dev->dev_private;
13547         struct intel_crtc *intel_crtc;
13548         struct drm_rect *src = &state->src;
13549
13550         crtc = crtc ? crtc : plane->crtc;
13551         intel_crtc = to_intel_crtc(crtc);
13552
13553         plane->fb = fb;
13554         crtc->x = src->x1 >> 16;
13555         crtc->y = src->y1 >> 16;
13556
13557         if (!crtc->state->active)
13558                 return;
13559
13560         dev_priv->display.update_primary_plane(crtc, fb,
13561                                                state->src.x1 >> 16,
13562                                                state->src.y1 >> 16);
13563 }
13564
13565 static void
13566 intel_disable_primary_plane(struct drm_plane *plane,
13567                             struct drm_crtc *crtc)
13568 {
13569         struct drm_device *dev = plane->dev;
13570         struct drm_i915_private *dev_priv = dev->dev_private;
13571
13572         dev_priv->display.update_primary_plane(crtc, NULL, 0, 0);
13573 }
13574
13575 static void intel_begin_crtc_commit(struct drm_crtc *crtc,
13576                                     struct drm_crtc_state *old_crtc_state)
13577 {
13578         struct drm_device *dev = crtc->dev;
13579         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13580         struct intel_crtc_state *old_intel_state =
13581                 to_intel_crtc_state(old_crtc_state);
13582         bool modeset = needs_modeset(crtc->state);
13583
13584         if (intel_crtc->atomic.update_wm_pre)
13585                 intel_update_watermarks(crtc);
13586
13587         /* Perform vblank evasion around commit operation */
13588         if (crtc->state->active)
13589                 intel_pipe_update_start(intel_crtc);
13590
13591         if (modeset)
13592                 return;
13593
13594         if (to_intel_crtc_state(crtc->state)->update_pipe)
13595                 intel_update_pipe_config(intel_crtc, old_intel_state);
13596         else if (INTEL_INFO(dev)->gen >= 9)
13597                 skl_detach_scalers(intel_crtc);
13598 }
13599
13600 static void intel_finish_crtc_commit(struct drm_crtc *crtc,
13601                                      struct drm_crtc_state *old_crtc_state)
13602 {
13603         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
13604
13605         if (crtc->state->active)
13606                 intel_pipe_update_end(intel_crtc);
13607 }
13608
13609 /**
13610  * intel_plane_destroy - destroy a plane
13611  * @plane: plane to destroy
13612  *
13613  * Common destruction function for all types of planes (primary, cursor,
13614  * sprite).
13615  */
13616 void intel_plane_destroy(struct drm_plane *plane)
13617 {
13618         struct intel_plane *intel_plane = to_intel_plane(plane);
13619         drm_plane_cleanup(plane);
13620         kfree(intel_plane);
13621 }
13622
13623 const struct drm_plane_funcs intel_plane_funcs = {
13624         .update_plane = drm_atomic_helper_update_plane,
13625         .disable_plane = drm_atomic_helper_disable_plane,
13626         .destroy = intel_plane_destroy,
13627         .set_property = drm_atomic_helper_plane_set_property,
13628         .atomic_get_property = intel_plane_atomic_get_property,
13629         .atomic_set_property = intel_plane_atomic_set_property,
13630         .atomic_duplicate_state = intel_plane_duplicate_state,
13631         .atomic_destroy_state = intel_plane_destroy_state,
13632
13633 };
13634
13635 static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
13636                                                     int pipe)
13637 {
13638         struct intel_plane *primary;
13639         struct intel_plane_state *state;
13640         const uint32_t *intel_primary_formats;
13641         unsigned int num_formats;
13642
13643         primary = kzalloc(sizeof(*primary), GFP_KERNEL);
13644         if (primary == NULL)
13645                 return NULL;
13646
13647         state = intel_create_plane_state(&primary->base);
13648         if (!state) {
13649                 kfree(primary);
13650                 return NULL;
13651         }
13652         primary->base.state = &state->base;
13653
13654         primary->can_scale = false;
13655         primary->max_downscale = 1;
13656         if (INTEL_INFO(dev)->gen >= 9) {
13657                 primary->can_scale = true;
13658                 state->scaler_id = -1;
13659         }
13660         primary->pipe = pipe;
13661         primary->plane = pipe;
13662         primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe);
13663         primary->check_plane = intel_check_primary_plane;
13664         primary->commit_plane = intel_commit_primary_plane;
13665         primary->disable_plane = intel_disable_primary_plane;
13666         if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4)
13667                 primary->plane = !pipe;
13668
13669         if (INTEL_INFO(dev)->gen >= 9) {
13670                 intel_primary_formats = skl_primary_formats;
13671                 num_formats = ARRAY_SIZE(skl_primary_formats);
13672         } else if (INTEL_INFO(dev)->gen >= 4) {
13673                 intel_primary_formats = i965_primary_formats;
13674                 num_formats = ARRAY_SIZE(i965_primary_formats);
13675         } else {
13676                 intel_primary_formats = i8xx_primary_formats;
13677                 num_formats = ARRAY_SIZE(i8xx_primary_formats);
13678         }
13679
13680         drm_universal_plane_init(dev, &primary->base, 0,
13681                                  &intel_plane_funcs,
13682                                  intel_primary_formats, num_formats,
13683                                  DRM_PLANE_TYPE_PRIMARY);
13684
13685         if (INTEL_INFO(dev)->gen >= 4)
13686                 intel_create_rotation_property(dev, primary);
13687
13688         drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
13689
13690         return &primary->base;
13691 }
13692
13693 void intel_create_rotation_property(struct drm_device *dev, struct intel_plane *plane)
13694 {
13695         if (!dev->mode_config.rotation_property) {
13696                 unsigned long flags = BIT(DRM_ROTATE_0) |
13697                         BIT(DRM_ROTATE_180);
13698
13699                 if (INTEL_INFO(dev)->gen >= 9)
13700                         flags |= BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270);
13701
13702                 dev->mode_config.rotation_property =
13703                         drm_mode_create_rotation_property(dev, flags);
13704         }
13705         if (dev->mode_config.rotation_property)
13706                 drm_object_attach_property(&plane->base.base,
13707                                 dev->mode_config.rotation_property,
13708                                 plane->base.state->rotation);
13709 }
13710
13711 static int
13712 intel_check_cursor_plane(struct drm_plane *plane,
13713                          struct intel_crtc_state *crtc_state,
13714                          struct intel_plane_state *state)
13715 {
13716         struct drm_crtc *crtc = crtc_state->base.crtc;
13717         struct drm_framebuffer *fb = state->base.fb;
13718         struct drm_i915_gem_object *obj = intel_fb_obj(fb);
13719         unsigned stride;
13720         int ret;
13721
13722         ret = drm_plane_helper_check_update(plane, crtc, fb, &state->src,
13723                                             &state->dst, &state->clip,
13724                                             DRM_PLANE_HELPER_NO_SCALING,
13725                                             DRM_PLANE_HELPER_NO_SCALING,
13726                                             true, true, &state->visible);
13727         if (ret)
13728                 return ret;
13729
13730         /* if we want to turn off the cursor ignore width and height */
13731         if (!obj)
13732                 return 0;
13733
13734         /* Check for which cursor types we support */
13735         if (!cursor_size_ok(plane->dev, state->base.crtc_w, state->base.crtc_h)) {
13736                 DRM_DEBUG("Cursor dimension %dx%d not supported\n",
13737                           state->base.crtc_w, state->base.crtc_h);
13738                 return -EINVAL;
13739         }
13740
13741         stride = roundup_pow_of_two(state->base.crtc_w) * 4;
13742         if (obj->base.size < stride * state->base.crtc_h) {
13743                 DRM_DEBUG_KMS("buffer is too small\n");
13744                 return -ENOMEM;
13745         }
13746
13747         if (fb->modifier[0] != DRM_FORMAT_MOD_NONE) {
13748                 DRM_DEBUG_KMS("cursor cannot be tiled\n");
13749                 return -EINVAL;
13750         }
13751
13752         return 0;
13753 }
13754
13755 static void
13756 intel_disable_cursor_plane(struct drm_plane *plane,
13757                            struct drm_crtc *crtc)
13758 {
13759         intel_crtc_update_cursor(crtc, false);
13760 }
13761
13762 static void
13763 intel_commit_cursor_plane(struct drm_plane *plane,
13764                           struct intel_plane_state *state)
13765 {
13766         struct drm_crtc *crtc = state->base.crtc;
13767         struct drm_device *dev = plane->dev;
13768         struct intel_crtc *intel_crtc;
13769         struct drm_i915_gem_object *obj = intel_fb_obj(state->base.fb);
13770         uint32_t addr;
13771
13772         crtc = crtc ? crtc : plane->crtc;
13773         intel_crtc = to_intel_crtc(crtc);
13774
13775         if (intel_crtc->cursor_bo == obj)
13776                 goto update;
13777
13778         if (!obj)
13779                 addr = 0;
13780         else if (!INTEL_INFO(dev)->cursor_needs_physical)
13781                 addr = i915_gem_obj_ggtt_offset(obj);
13782         else
13783                 addr = obj->phys_handle->busaddr;
13784
13785         intel_crtc->cursor_addr = addr;
13786         intel_crtc->cursor_bo = obj;
13787
13788 update:
13789         if (crtc->state->active)
13790                 intel_crtc_update_cursor(crtc, state->visible);
13791 }
13792
13793 static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
13794                                                    int pipe)
13795 {
13796         struct intel_plane *cursor;
13797         struct intel_plane_state *state;
13798
13799         cursor = kzalloc(sizeof(*cursor), GFP_KERNEL);
13800         if (cursor == NULL)
13801                 return NULL;
13802
13803         state = intel_create_plane_state(&cursor->base);
13804         if (!state) {
13805                 kfree(cursor);
13806                 return NULL;
13807         }
13808         cursor->base.state = &state->base;
13809
13810         cursor->can_scale = false;
13811         cursor->max_downscale = 1;
13812         cursor->pipe = pipe;
13813         cursor->plane = pipe;
13814         cursor->frontbuffer_bit = INTEL_FRONTBUFFER_CURSOR(pipe);
13815         cursor->check_plane = intel_check_cursor_plane;
13816         cursor->commit_plane = intel_commit_cursor_plane;
13817         cursor->disable_plane = intel_disable_cursor_plane;
13818
13819         drm_universal_plane_init(dev, &cursor->base, 0,
13820                                  &intel_plane_funcs,
13821                                  intel_cursor_formats,
13822                                  ARRAY_SIZE(intel_cursor_formats),
13823                                  DRM_PLANE_TYPE_CURSOR);
13824
13825         if (INTEL_INFO(dev)->gen >= 4) {
13826                 if (!dev->mode_config.rotation_property)
13827                         dev->mode_config.rotation_property =
13828                                 drm_mode_create_rotation_property(dev,
13829                                                         BIT(DRM_ROTATE_0) |
13830                                                         BIT(DRM_ROTATE_180));
13831                 if (dev->mode_config.rotation_property)
13832                         drm_object_attach_property(&cursor->base.base,
13833                                 dev->mode_config.rotation_property,
13834                                 state->base.rotation);
13835         }
13836
13837         if (INTEL_INFO(dev)->gen >=9)
13838                 state->scaler_id = -1;
13839
13840         drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
13841
13842         return &cursor->base;
13843 }
13844
13845 static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_crtc,
13846         struct intel_crtc_state *crtc_state)
13847 {
13848         int i;
13849         struct intel_scaler *intel_scaler;
13850         struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state;
13851
13852         for (i = 0; i < intel_crtc->num_scalers; i++) {
13853                 intel_scaler = &scaler_state->scalers[i];
13854                 intel_scaler->in_use = 0;
13855                 intel_scaler->mode = PS_SCALER_MODE_DYN;
13856         }
13857
13858         scaler_state->scaler_id = -1;
13859 }
13860
13861 static void intel_crtc_init(struct drm_device *dev, int pipe)
13862 {
13863         struct drm_i915_private *dev_priv = dev->dev_private;
13864         struct intel_crtc *intel_crtc;
13865         struct intel_crtc_state *crtc_state = NULL;
13866         struct drm_plane *primary = NULL;
13867         struct drm_plane *cursor = NULL;
13868         int i, ret;
13869
13870         intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
13871         if (intel_crtc == NULL)
13872                 return;
13873
13874         crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
13875         if (!crtc_state)
13876                 goto fail;
13877         intel_crtc->config = crtc_state;
13878         intel_crtc->base.state = &crtc_state->base;
13879         crtc_state->base.crtc = &intel_crtc->base;
13880
13881         /* initialize shared scalers */
13882         if (INTEL_INFO(dev)->gen >= 9) {
13883                 if (pipe == PIPE_C)
13884                         intel_crtc->num_scalers = 1;
13885                 else
13886                         intel_crtc->num_scalers = SKL_NUM_SCALERS;
13887
13888                 skl_init_scalers(dev, intel_crtc, crtc_state);
13889         }
13890
13891         primary = intel_primary_plane_create(dev, pipe);
13892         if (!primary)
13893                 goto fail;
13894
13895         cursor = intel_cursor_plane_create(dev, pipe);
13896         if (!cursor)
13897                 goto fail;
13898
13899         ret = drm_crtc_init_with_planes(dev, &intel_crtc->base, primary,
13900                                         cursor, &intel_crtc_funcs);
13901         if (ret)
13902                 goto fail;
13903
13904         drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
13905         for (i = 0; i < 256; i++) {
13906                 intel_crtc->lut_r[i] = i;
13907                 intel_crtc->lut_g[i] = i;
13908                 intel_crtc->lut_b[i] = i;
13909         }
13910
13911         /*
13912          * On gen2/3 only plane A can do fbc, but the panel fitter and lvds port
13913          * is hooked to pipe B. Hence we want plane A feeding pipe B.
13914          */
13915         intel_crtc->pipe = pipe;
13916         intel_crtc->plane = pipe;
13917         if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
13918                 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
13919                 intel_crtc->plane = !pipe;
13920         }
13921
13922         intel_crtc->cursor_base = ~0;
13923         intel_crtc->cursor_cntl = ~0;
13924         intel_crtc->cursor_size = ~0;
13925
13926         intel_crtc->wm.cxsr_allowed = true;
13927
13928         BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
13929                dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
13930         dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
13931         dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
13932
13933         drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
13934
13935         WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
13936         return;
13937
13938 fail:
13939         if (primary)
13940                 drm_plane_cleanup(primary);
13941         if (cursor)
13942                 drm_plane_cleanup(cursor);
13943         kfree(crtc_state);
13944         kfree(intel_crtc);
13945 }
13946
13947 enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
13948 {
13949         struct drm_encoder *encoder = connector->base.encoder;
13950         struct drm_device *dev = connector->base.dev;
13951
13952         WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
13953
13954         if (!encoder || WARN_ON(!encoder->crtc))
13955                 return INVALID_PIPE;
13956
13957         return to_intel_crtc(encoder->crtc)->pipe;
13958 }
13959
13960 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
13961                                 struct drm_file *file)
13962 {
13963         struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
13964         struct drm_crtc *drmmode_crtc;
13965         struct intel_crtc *crtc;
13966
13967         drmmode_crtc = drm_crtc_find(dev, pipe_from_crtc_id->crtc_id);
13968
13969         if (!drmmode_crtc) {
13970                 DRM_ERROR("no such CRTC id\n");
13971                 return -ENOENT;
13972         }
13973
13974         crtc = to_intel_crtc(drmmode_crtc);
13975         pipe_from_crtc_id->pipe = crtc->pipe;
13976
13977         return 0;
13978 }
13979
13980 static int intel_encoder_clones(struct intel_encoder *encoder)
13981 {
13982         struct drm_device *dev = encoder->base.dev;
13983         struct intel_encoder *source_encoder;
13984         int index_mask = 0;
13985         int entry = 0;
13986
13987         for_each_intel_encoder(dev, source_encoder) {
13988                 if (encoders_cloneable(encoder, source_encoder))
13989                         index_mask |= (1 << entry);
13990
13991                 entry++;
13992         }
13993
13994         return index_mask;
13995 }
13996
13997 static bool has_edp_a(struct drm_device *dev)
13998 {
13999         struct drm_i915_private *dev_priv = dev->dev_private;
14000
14001         if (!IS_MOBILE(dev))
14002                 return false;
14003
14004         if ((I915_READ(DP_A) & DP_DETECTED) == 0)
14005                 return false;
14006
14007         if (IS_GEN5(dev) && (I915_READ(FUSE_STRAP) & ILK_eDP_A_DISABLE))
14008                 return false;
14009
14010         return true;
14011 }
14012
14013 static bool intel_crt_present(struct drm_device *dev)
14014 {
14015         struct drm_i915_private *dev_priv = dev->dev_private;
14016
14017         if (INTEL_INFO(dev)->gen >= 9)
14018                 return false;
14019
14020         if (IS_HSW_ULT(dev) || IS_BDW_ULT(dev))
14021                 return false;
14022
14023         if (IS_CHERRYVIEW(dev))
14024                 return false;
14025
14026         if (IS_VALLEYVIEW(dev) && !dev_priv->vbt.int_crt_support)
14027                 return false;
14028
14029         return true;
14030 }
14031
14032 static void intel_setup_outputs(struct drm_device *dev)
14033 {
14034         struct drm_i915_private *dev_priv = dev->dev_private;
14035         struct intel_encoder *encoder;
14036         bool dpd_is_edp = false;
14037
14038         intel_lvds_init(dev);
14039
14040         if (intel_crt_present(dev))
14041                 intel_crt_init(dev);
14042
14043         if (IS_BROXTON(dev)) {
14044                 /*
14045                  * FIXME: Broxton doesn't support port detection via the
14046                  * DDI_BUF_CTL_A or SFUSE_STRAP registers, find another way to
14047                  * detect the ports.
14048                  */
14049                 intel_ddi_init(dev, PORT_A);
14050                 intel_ddi_init(dev, PORT_B);
14051                 intel_ddi_init(dev, PORT_C);
14052         } else if (HAS_DDI(dev)) {
14053                 int found;
14054
14055                 /*
14056                  * Haswell uses DDI functions to detect digital outputs.
14057                  * On SKL pre-D0 the strap isn't connected, so we assume
14058                  * it's there.
14059                  */
14060                 found = I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
14061                 /* WaIgnoreDDIAStrap: skl */
14062                 if (found || IS_SKYLAKE(dev))
14063                         intel_ddi_init(dev, PORT_A);
14064
14065                 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
14066                  * register */
14067                 found = I915_READ(SFUSE_STRAP);
14068
14069                 if (found & SFUSE_STRAP_DDIB_DETECTED)
14070                         intel_ddi_init(dev, PORT_B);
14071                 if (found & SFUSE_STRAP_DDIC_DETECTED)
14072                         intel_ddi_init(dev, PORT_C);
14073                 if (found & SFUSE_STRAP_DDID_DETECTED)
14074                         intel_ddi_init(dev, PORT_D);
14075                 /*
14076                  * On SKL we don't have a way to detect DDI-E so we rely on VBT.
14077                  */
14078                 if (IS_SKYLAKE(dev) &&
14079                     (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
14080                      dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
14081                      dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
14082                         intel_ddi_init(dev, PORT_E);
14083
14084         } else if (HAS_PCH_SPLIT(dev)) {
14085                 int found;
14086                 dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
14087
14088                 if (has_edp_a(dev))
14089                         intel_dp_init(dev, DP_A, PORT_A);
14090
14091                 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
14092                         /* PCH SDVOB multiplex with HDMIB */
14093                         found = intel_sdvo_init(dev, PCH_SDVOB, true);
14094                         if (!found)
14095                                 intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
14096                         if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
14097                                 intel_dp_init(dev, PCH_DP_B, PORT_B);
14098                 }
14099
14100                 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
14101                         intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
14102
14103                 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
14104                         intel_hdmi_init(dev, PCH_HDMID, PORT_D);
14105
14106                 if (I915_READ(PCH_DP_C) & DP_DETECTED)
14107                         intel_dp_init(dev, PCH_DP_C, PORT_C);
14108
14109                 if (I915_READ(PCH_DP_D) & DP_DETECTED)
14110                         intel_dp_init(dev, PCH_DP_D, PORT_D);
14111         } else if (IS_VALLEYVIEW(dev)) {
14112                 /*
14113                  * The DP_DETECTED bit is the latched state of the DDC
14114                  * SDA pin at boot. However since eDP doesn't require DDC
14115                  * (no way to plug in a DP->HDMI dongle) the DDC pins for
14116                  * eDP ports may have been muxed to an alternate function.
14117                  * Thus we can't rely on the DP_DETECTED bit alone to detect
14118                  * eDP ports. Consult the VBT as well as DP_DETECTED to
14119                  * detect eDP ports.
14120                  */
14121                 if (I915_READ(VLV_HDMIB) & SDVO_DETECTED &&
14122                     !intel_dp_is_edp(dev, PORT_B))
14123                         intel_hdmi_init(dev, VLV_HDMIB, PORT_B);
14124                 if (I915_READ(VLV_DP_B) & DP_DETECTED ||
14125                     intel_dp_is_edp(dev, PORT_B))
14126                         intel_dp_init(dev, VLV_DP_B, PORT_B);
14127
14128                 if (I915_READ(VLV_HDMIC) & SDVO_DETECTED &&
14129                     !intel_dp_is_edp(dev, PORT_C))
14130                         intel_hdmi_init(dev, VLV_HDMIC, PORT_C);
14131                 if (I915_READ(VLV_DP_C) & DP_DETECTED ||
14132                     intel_dp_is_edp(dev, PORT_C))
14133                         intel_dp_init(dev, VLV_DP_C, PORT_C);
14134
14135                 if (IS_CHERRYVIEW(dev)) {
14136                         /* eDP not supported on port D, so don't check VBT */
14137                         if (I915_READ(CHV_HDMID) & SDVO_DETECTED)
14138                                 intel_hdmi_init(dev, CHV_HDMID, PORT_D);
14139                         if (I915_READ(CHV_DP_D) & DP_DETECTED)
14140                                 intel_dp_init(dev, CHV_DP_D, PORT_D);
14141                 }
14142
14143                 intel_dsi_init(dev);
14144         } else if (!IS_GEN2(dev) && !IS_PINEVIEW(dev)) {
14145                 bool found = false;
14146
14147                 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
14148                         DRM_DEBUG_KMS("probing SDVOB\n");
14149                         found = intel_sdvo_init(dev, GEN3_SDVOB, true);
14150                         if (!found && IS_G4X(dev)) {
14151                                 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
14152                                 intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
14153                         }
14154
14155                         if (!found && IS_G4X(dev))
14156                                 intel_dp_init(dev, DP_B, PORT_B);
14157                 }
14158
14159                 /* Before G4X SDVOC doesn't have its own detect register */
14160
14161                 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
14162                         DRM_DEBUG_KMS("probing SDVOC\n");
14163                         found = intel_sdvo_init(dev, GEN3_SDVOC, false);
14164                 }
14165
14166                 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
14167
14168                         if (IS_G4X(dev)) {
14169                                 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
14170                                 intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
14171                         }
14172                         if (IS_G4X(dev))
14173                                 intel_dp_init(dev, DP_C, PORT_C);
14174                 }
14175
14176                 if (IS_G4X(dev) &&
14177                     (I915_READ(DP_D) & DP_DETECTED))
14178                         intel_dp_init(dev, DP_D, PORT_D);
14179         } else if (IS_GEN2(dev))
14180                 intel_dvo_init(dev);
14181
14182         if (SUPPORTS_TV(dev))
14183                 intel_tv_init(dev);
14184
14185         intel_psr_init(dev);
14186
14187         for_each_intel_encoder(dev, encoder) {
14188                 encoder->base.possible_crtcs = encoder->crtc_mask;
14189                 encoder->base.possible_clones =
14190                         intel_encoder_clones(encoder);
14191         }
14192
14193         intel_init_pch_refclk(dev);
14194
14195         drm_helper_move_panel_connectors_to_head(dev);
14196 }
14197
14198 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
14199 {
14200         struct drm_device *dev = fb->dev;
14201         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14202
14203         drm_framebuffer_cleanup(fb);
14204         mutex_lock(&dev->struct_mutex);
14205         WARN_ON(!intel_fb->obj->framebuffer_references--);
14206         drm_gem_object_unreference(&intel_fb->obj->base);
14207         mutex_unlock(&dev->struct_mutex);
14208         kfree(intel_fb);
14209 }
14210
14211 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
14212                                                 struct drm_file *file,
14213                                                 unsigned int *handle)
14214 {
14215         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14216         struct drm_i915_gem_object *obj = intel_fb->obj;
14217
14218         if (obj->userptr.mm) {
14219                 DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
14220                 return -EINVAL;
14221         }
14222
14223         return drm_gem_handle_create(file, &obj->base, handle);
14224 }
14225
14226 static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,
14227                                         struct drm_file *file,
14228                                         unsigned flags, unsigned color,
14229                                         struct drm_clip_rect *clips,
14230                                         unsigned num_clips)
14231 {
14232         struct drm_device *dev = fb->dev;
14233         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
14234         struct drm_i915_gem_object *obj = intel_fb->obj;
14235
14236         mutex_lock(&dev->struct_mutex);
14237         intel_fb_obj_flush(obj, false, ORIGIN_DIRTYFB);
14238         mutex_unlock(&dev->struct_mutex);
14239
14240         return 0;
14241 }
14242
14243 static const struct drm_framebuffer_funcs intel_fb_funcs = {
14244         .destroy = intel_user_framebuffer_destroy,
14245         .create_handle = intel_user_framebuffer_create_handle,
14246         .dirty = intel_user_framebuffer_dirty,
14247 };
14248
14249 static
14250 u32 intel_fb_pitch_limit(struct drm_device *dev, uint64_t fb_modifier,
14251                          uint32_t pixel_format)
14252 {
14253         u32 gen = INTEL_INFO(dev)->gen;
14254
14255         if (gen >= 9) {
14256                 /* "The stride in bytes must not exceed the of the size of 8K
14257                  *  pixels and 32K bytes."
14258                  */
14259                  return min(8192*drm_format_plane_cpp(pixel_format, 0), 32768);
14260         } else if (gen >= 5 && !IS_VALLEYVIEW(dev)) {
14261                 return 32*1024;
14262         } else if (gen >= 4) {
14263                 if (fb_modifier == I915_FORMAT_MOD_X_TILED)
14264                         return 16*1024;
14265                 else
14266                         return 32*1024;
14267         } else if (gen >= 3) {
14268                 if (fb_modifier == I915_FORMAT_MOD_X_TILED)
14269                         return 8*1024;
14270                 else
14271                         return 16*1024;
14272         } else {
14273                 /* XXX DSPC is limited to 4k tiled */
14274                 return 8*1024;
14275         }
14276 }
14277
14278 static int intel_framebuffer_init(struct drm_device *dev,
14279                                   struct intel_framebuffer *intel_fb,
14280                                   struct drm_mode_fb_cmd2 *mode_cmd,
14281                                   struct drm_i915_gem_object *obj)
14282 {
14283         unsigned int aligned_height;
14284         int ret;
14285         u32 pitch_limit, stride_alignment;
14286
14287         WARN_ON(!mutex_is_locked(&dev->struct_mutex));
14288
14289         if (mode_cmd->flags & DRM_MODE_FB_MODIFIERS) {
14290                 /* Enforce that fb modifier and tiling mode match, but only for
14291                  * X-tiled. This is needed for FBC. */
14292                 if (!!(obj->tiling_mode == I915_TILING_X) !=
14293                     !!(mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED)) {
14294                         DRM_DEBUG("tiling_mode doesn't match fb modifier\n");
14295                         return -EINVAL;
14296                 }
14297         } else {
14298                 if (obj->tiling_mode == I915_TILING_X)
14299                         mode_cmd->modifier[0] = I915_FORMAT_MOD_X_TILED;
14300                 else if (obj->tiling_mode == I915_TILING_Y) {
14301                         DRM_DEBUG("No Y tiling for legacy addfb\n");
14302                         return -EINVAL;
14303                 }
14304         }
14305
14306         /* Passed in modifier sanity checking. */
14307         switch (mode_cmd->modifier[0]) {
14308         case I915_FORMAT_MOD_Y_TILED:
14309         case I915_FORMAT_MOD_Yf_TILED:
14310                 if (INTEL_INFO(dev)->gen < 9) {
14311                         DRM_DEBUG("Unsupported tiling 0x%llx!\n",
14312                                   mode_cmd->modifier[0]);
14313                         return -EINVAL;
14314                 }
14315         case DRM_FORMAT_MOD_NONE:
14316         case I915_FORMAT_MOD_X_TILED:
14317                 break;
14318         default:
14319                 DRM_DEBUG("Unsupported fb modifier 0x%llx!\n",
14320                           mode_cmd->modifier[0]);
14321                 return -EINVAL;
14322         }
14323
14324         stride_alignment = intel_fb_stride_alignment(dev, mode_cmd->modifier[0],
14325                                                      mode_cmd->pixel_format);
14326         if (mode_cmd->pitches[0] & (stride_alignment - 1)) {
14327                 DRM_DEBUG("pitch (%d) must be at least %u byte aligned\n",
14328                           mode_cmd->pitches[0], stride_alignment);
14329                 return -EINVAL;
14330         }
14331
14332         pitch_limit = intel_fb_pitch_limit(dev, mode_cmd->modifier[0],
14333                                            mode_cmd->pixel_format);
14334         if (mode_cmd->pitches[0] > pitch_limit) {
14335                 DRM_DEBUG("%s pitch (%u) must be at less than %d\n",
14336                           mode_cmd->modifier[0] != DRM_FORMAT_MOD_NONE ?
14337                           "tiled" : "linear",
14338                           mode_cmd->pitches[0], pitch_limit);
14339                 return -EINVAL;
14340         }
14341
14342         if (mode_cmd->modifier[0] == I915_FORMAT_MOD_X_TILED &&
14343             mode_cmd->pitches[0] != obj->stride) {
14344                 DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
14345                           mode_cmd->pitches[0], obj->stride);
14346                 return -EINVAL;
14347         }
14348
14349         /* Reject formats not supported by any plane early. */
14350         switch (mode_cmd->pixel_format) {
14351         case DRM_FORMAT_C8:
14352         case DRM_FORMAT_RGB565:
14353         case DRM_FORMAT_XRGB8888:
14354         case DRM_FORMAT_ARGB8888:
14355                 break;
14356         case DRM_FORMAT_XRGB1555:
14357                 if (INTEL_INFO(dev)->gen > 3) {
14358                         DRM_DEBUG("unsupported pixel format: %s\n",
14359                                   drm_get_format_name(mode_cmd->pixel_format));
14360                         return -EINVAL;
14361                 }
14362                 break;
14363         case DRM_FORMAT_ABGR8888:
14364                 if (!IS_VALLEYVIEW(dev) && INTEL_INFO(dev)->gen < 9) {
14365                         DRM_DEBUG("unsupported pixel format: %s\n",
14366                                   drm_get_format_name(mode_cmd->pixel_format));
14367                         return -EINVAL;
14368                 }
14369                 break;
14370         case DRM_FORMAT_XBGR8888:
14371         case DRM_FORMAT_XRGB2101010:
14372         case DRM_FORMAT_XBGR2101010:
14373                 if (INTEL_INFO(dev)->gen < 4) {
14374                         DRM_DEBUG("unsupported pixel format: %s\n",
14375                                   drm_get_format_name(mode_cmd->pixel_format));
14376                         return -EINVAL;
14377                 }
14378                 break;
14379         case DRM_FORMAT_ABGR2101010:
14380                 if (!IS_VALLEYVIEW(dev)) {
14381                         DRM_DEBUG("unsupported pixel format: %s\n",
14382                                   drm_get_format_name(mode_cmd->pixel_format));
14383                         return -EINVAL;
14384                 }
14385                 break;
14386         case DRM_FORMAT_YUYV:
14387         case DRM_FORMAT_UYVY:
14388         case DRM_FORMAT_YVYU:
14389         case DRM_FORMAT_VYUY:
14390                 if (INTEL_INFO(dev)->gen < 5) {
14391                         DRM_DEBUG("unsupported pixel format: %s\n",
14392                                   drm_get_format_name(mode_cmd->pixel_format));
14393                         return -EINVAL;
14394                 }
14395                 break;
14396         default:
14397                 DRM_DEBUG("unsupported pixel format: %s\n",
14398                           drm_get_format_name(mode_cmd->pixel_format));
14399                 return -EINVAL;
14400         }
14401
14402         /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
14403         if (mode_cmd->offsets[0] != 0)
14404                 return -EINVAL;
14405
14406         aligned_height = intel_fb_align_height(dev, mode_cmd->height,
14407                                                mode_cmd->pixel_format,
14408                                                mode_cmd->modifier[0]);
14409         /* FIXME drm helper for size checks (especially planar formats)? */
14410         if (obj->base.size < aligned_height * mode_cmd->pitches[0])
14411                 return -EINVAL;
14412
14413         drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
14414         intel_fb->obj = obj;
14415         intel_fb->obj->framebuffer_references++;
14416
14417         ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
14418         if (ret) {
14419                 DRM_ERROR("framebuffer init failed %d\n", ret);
14420                 return ret;
14421         }
14422
14423         return 0;
14424 }
14425
14426 static struct drm_framebuffer *
14427 intel_user_framebuffer_create(struct drm_device *dev,
14428                               struct drm_file *filp,
14429                               struct drm_mode_fb_cmd2 *user_mode_cmd)
14430 {
14431         struct drm_i915_gem_object *obj;
14432         struct drm_mode_fb_cmd2 mode_cmd = *user_mode_cmd;
14433
14434         obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
14435                                                 mode_cmd.handles[0]));
14436         if (&obj->base == NULL)
14437                 return ERR_PTR(-ENOENT);
14438
14439         return intel_framebuffer_create(dev, &mode_cmd, obj);
14440 }
14441
14442 #ifndef CONFIG_DRM_FBDEV_EMULATION
14443 static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
14444 {
14445 }
14446 #endif
14447
14448 static const struct drm_mode_config_funcs intel_mode_funcs = {
14449         .fb_create = intel_user_framebuffer_create,
14450         .output_poll_changed = intel_fbdev_output_poll_changed,
14451         .atomic_check = intel_atomic_check,
14452         .atomic_commit = intel_atomic_commit,
14453         .atomic_state_alloc = intel_atomic_state_alloc,
14454         .atomic_state_clear = intel_atomic_state_clear,
14455 };
14456
14457 /* Set up chip specific display functions */
14458 static void intel_init_display(struct drm_device *dev)
14459 {
14460         struct drm_i915_private *dev_priv = dev->dev_private;
14461
14462         if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
14463                 dev_priv->display.find_dpll = g4x_find_best_dpll;
14464         else if (IS_CHERRYVIEW(dev))
14465                 dev_priv->display.find_dpll = chv_find_best_dpll;
14466         else if (IS_VALLEYVIEW(dev))
14467                 dev_priv->display.find_dpll = vlv_find_best_dpll;
14468         else if (IS_PINEVIEW(dev))
14469                 dev_priv->display.find_dpll = pnv_find_best_dpll;
14470         else
14471                 dev_priv->display.find_dpll = i9xx_find_best_dpll;
14472
14473         if (INTEL_INFO(dev)->gen >= 9) {
14474                 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
14475                 dev_priv->display.get_initial_plane_config =
14476                         skylake_get_initial_plane_config;
14477                 dev_priv->display.crtc_compute_clock =
14478                         haswell_crtc_compute_clock;
14479                 dev_priv->display.crtc_enable = haswell_crtc_enable;
14480                 dev_priv->display.crtc_disable = haswell_crtc_disable;
14481                 dev_priv->display.update_primary_plane =
14482                         skylake_update_primary_plane;
14483         } else if (HAS_DDI(dev)) {
14484                 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
14485                 dev_priv->display.get_initial_plane_config =
14486                         ironlake_get_initial_plane_config;
14487                 dev_priv->display.crtc_compute_clock =
14488                         haswell_crtc_compute_clock;
14489                 dev_priv->display.crtc_enable = haswell_crtc_enable;
14490                 dev_priv->display.crtc_disable = haswell_crtc_disable;
14491                 dev_priv->display.update_primary_plane =
14492                         ironlake_update_primary_plane;
14493         } else if (HAS_PCH_SPLIT(dev)) {
14494                 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
14495                 dev_priv->display.get_initial_plane_config =
14496                         ironlake_get_initial_plane_config;
14497                 dev_priv->display.crtc_compute_clock =
14498                         ironlake_crtc_compute_clock;
14499                 dev_priv->display.crtc_enable = ironlake_crtc_enable;
14500                 dev_priv->display.crtc_disable = ironlake_crtc_disable;
14501                 dev_priv->display.update_primary_plane =
14502                         ironlake_update_primary_plane;
14503         } else if (IS_VALLEYVIEW(dev)) {
14504                 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14505                 dev_priv->display.get_initial_plane_config =
14506                         i9xx_get_initial_plane_config;
14507                 dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
14508                 dev_priv->display.crtc_enable = valleyview_crtc_enable;
14509                 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14510                 dev_priv->display.update_primary_plane =
14511                         i9xx_update_primary_plane;
14512         } else {
14513                 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
14514                 dev_priv->display.get_initial_plane_config =
14515                         i9xx_get_initial_plane_config;
14516                 dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
14517                 dev_priv->display.crtc_enable = i9xx_crtc_enable;
14518                 dev_priv->display.crtc_disable = i9xx_crtc_disable;
14519                 dev_priv->display.update_primary_plane =
14520                         i9xx_update_primary_plane;
14521         }
14522
14523         /* Returns the core display clock speed */
14524         if (IS_SKYLAKE(dev))
14525                 dev_priv->display.get_display_clock_speed =
14526                         skylake_get_display_clock_speed;
14527         else if (IS_BROXTON(dev))
14528                 dev_priv->display.get_display_clock_speed =
14529                         broxton_get_display_clock_speed;
14530         else if (IS_BROADWELL(dev))
14531                 dev_priv->display.get_display_clock_speed =
14532                         broadwell_get_display_clock_speed;
14533         else if (IS_HASWELL(dev))
14534                 dev_priv->display.get_display_clock_speed =
14535                         haswell_get_display_clock_speed;
14536         else if (IS_VALLEYVIEW(dev))
14537                 dev_priv->display.get_display_clock_speed =
14538                         valleyview_get_display_clock_speed;
14539         else if (IS_GEN5(dev))
14540                 dev_priv->display.get_display_clock_speed =
14541                         ilk_get_display_clock_speed;
14542         else if (IS_I945G(dev) || IS_BROADWATER(dev) ||
14543                  IS_GEN6(dev) || IS_IVYBRIDGE(dev))
14544                 dev_priv->display.get_display_clock_speed =
14545                         i945_get_display_clock_speed;
14546         else if (IS_GM45(dev))
14547                 dev_priv->display.get_display_clock_speed =
14548                         gm45_get_display_clock_speed;
14549         else if (IS_CRESTLINE(dev))
14550                 dev_priv->display.get_display_clock_speed =
14551                         i965gm_get_display_clock_speed;
14552         else if (IS_PINEVIEW(dev))
14553                 dev_priv->display.get_display_clock_speed =
14554                         pnv_get_display_clock_speed;
14555         else if (IS_G33(dev) || IS_G4X(dev))
14556                 dev_priv->display.get_display_clock_speed =
14557                         g33_get_display_clock_speed;
14558         else if (IS_I915G(dev))
14559                 dev_priv->display.get_display_clock_speed =
14560                         i915_get_display_clock_speed;
14561         else if (IS_I945GM(dev) || IS_845G(dev))
14562                 dev_priv->display.get_display_clock_speed =
14563                         i9xx_misc_get_display_clock_speed;
14564         else if (IS_PINEVIEW(dev))
14565                 dev_priv->display.get_display_clock_speed =
14566                         pnv_get_display_clock_speed;
14567         else if (IS_I915GM(dev))
14568                 dev_priv->display.get_display_clock_speed =
14569                         i915gm_get_display_clock_speed;
14570         else if (IS_I865G(dev))
14571                 dev_priv->display.get_display_clock_speed =
14572                         i865_get_display_clock_speed;
14573         else if (IS_I85X(dev))
14574                 dev_priv->display.get_display_clock_speed =
14575                         i85x_get_display_clock_speed;
14576         else { /* 830 */
14577                 WARN(!IS_I830(dev), "Unknown platform. Assuming 133 MHz CDCLK\n");
14578                 dev_priv->display.get_display_clock_speed =
14579                         i830_get_display_clock_speed;
14580         }
14581
14582         if (IS_GEN5(dev)) {
14583                 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
14584         } else if (IS_GEN6(dev)) {
14585                 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
14586         } else if (IS_IVYBRIDGE(dev)) {
14587                 /* FIXME: detect B0+ stepping and use auto training */
14588                 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
14589         } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
14590                 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
14591                 if (IS_BROADWELL(dev)) {
14592                         dev_priv->display.modeset_commit_cdclk =
14593                                 broadwell_modeset_commit_cdclk;
14594                         dev_priv->display.modeset_calc_cdclk =
14595                                 broadwell_modeset_calc_cdclk;
14596                 }
14597         } else if (IS_VALLEYVIEW(dev)) {
14598                 dev_priv->display.modeset_commit_cdclk =
14599                         valleyview_modeset_commit_cdclk;
14600                 dev_priv->display.modeset_calc_cdclk =
14601                         valleyview_modeset_calc_cdclk;
14602         } else if (IS_BROXTON(dev)) {
14603                 dev_priv->display.modeset_commit_cdclk =
14604                         broxton_modeset_commit_cdclk;
14605                 dev_priv->display.modeset_calc_cdclk =
14606                         broxton_modeset_calc_cdclk;
14607         }
14608
14609         switch (INTEL_INFO(dev)->gen) {
14610         case 2:
14611                 dev_priv->display.queue_flip = intel_gen2_queue_flip;
14612                 break;
14613
14614         case 3:
14615                 dev_priv->display.queue_flip = intel_gen3_queue_flip;
14616                 break;
14617
14618         case 4:
14619         case 5:
14620                 dev_priv->display.queue_flip = intel_gen4_queue_flip;
14621                 break;
14622
14623         case 6:
14624                 dev_priv->display.queue_flip = intel_gen6_queue_flip;
14625                 break;
14626         case 7:
14627         case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
14628                 dev_priv->display.queue_flip = intel_gen7_queue_flip;
14629                 break;
14630         case 9:
14631                 /* Drop through - unsupported since execlist only. */
14632         default:
14633                 /* Default just returns -ENODEV to indicate unsupported */
14634                 dev_priv->display.queue_flip = intel_default_queue_flip;
14635         }
14636
14637         mutex_init(&dev_priv->pps_mutex);
14638 }
14639
14640 /*
14641  * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
14642  * resume, or other times.  This quirk makes sure that's the case for
14643  * affected systems.
14644  */
14645 static void quirk_pipea_force(struct drm_device *dev)
14646 {
14647         struct drm_i915_private *dev_priv = dev->dev_private;
14648
14649         dev_priv->quirks |= QUIRK_PIPEA_FORCE;
14650         DRM_INFO("applying pipe a force quirk\n");
14651 }
14652
14653 static void quirk_pipeb_force(struct drm_device *dev)
14654 {
14655         struct drm_i915_private *dev_priv = dev->dev_private;
14656
14657         dev_priv->quirks |= QUIRK_PIPEB_FORCE;
14658         DRM_INFO("applying pipe b force quirk\n");
14659 }
14660
14661 /*
14662  * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
14663  */
14664 static void quirk_ssc_force_disable(struct drm_device *dev)
14665 {
14666         struct drm_i915_private *dev_priv = dev->dev_private;
14667         dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
14668         DRM_INFO("applying lvds SSC disable quirk\n");
14669 }
14670
14671 /*
14672  * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
14673  * brightness value
14674  */
14675 static void quirk_invert_brightness(struct drm_device *dev)
14676 {
14677         struct drm_i915_private *dev_priv = dev->dev_private;
14678         dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
14679         DRM_INFO("applying inverted panel brightness quirk\n");
14680 }
14681
14682 /* Some VBT's incorrectly indicate no backlight is present */
14683 static void quirk_backlight_present(struct drm_device *dev)
14684 {
14685         struct drm_i915_private *dev_priv = dev->dev_private;
14686         dev_priv->quirks |= QUIRK_BACKLIGHT_PRESENT;
14687         DRM_INFO("applying backlight present quirk\n");
14688 }
14689
14690 struct intel_quirk {
14691         int device;
14692         int subsystem_vendor;
14693         int subsystem_device;
14694         void (*hook)(struct drm_device *dev);
14695 };
14696
14697 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
14698 struct intel_dmi_quirk {
14699         void (*hook)(struct drm_device *dev);
14700         const struct dmi_system_id (*dmi_id_list)[];
14701 };
14702
14703 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
14704 {
14705         DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
14706         return 1;
14707 }
14708
14709 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
14710         {
14711                 .dmi_id_list = &(const struct dmi_system_id[]) {
14712                         {
14713                                 .callback = intel_dmi_reverse_brightness,
14714                                 .ident = "NCR Corporation",
14715                                 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
14716                                             DMI_MATCH(DMI_PRODUCT_NAME, ""),
14717                                 },
14718                         },
14719                         { }  /* terminating entry */
14720                 },
14721                 .hook = quirk_invert_brightness,
14722         },
14723 };
14724
14725 static struct intel_quirk intel_quirks[] = {
14726         /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
14727         { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
14728
14729         /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
14730         { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
14731
14732         /* 830 needs to leave pipe A & dpll A up */
14733         { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
14734
14735         /* 830 needs to leave pipe B & dpll B up */
14736         { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipeb_force },
14737
14738         /* Lenovo U160 cannot use SSC on LVDS */
14739         { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
14740
14741         /* Sony Vaio Y cannot use SSC on LVDS */
14742         { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
14743
14744         /* Acer Aspire 5734Z must invert backlight brightness */
14745         { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
14746
14747         /* Acer/eMachines G725 */
14748         { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
14749
14750         /* Acer/eMachines e725 */
14751         { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
14752
14753         /* Acer/Packard Bell NCL20 */
14754         { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
14755
14756         /* Acer Aspire 4736Z */
14757         { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
14758
14759         /* Acer Aspire 5336 */
14760         { 0x2a42, 0x1025, 0x048a, quirk_invert_brightness },
14761
14762         /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */
14763         { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present },
14764
14765         /* Acer C720 Chromebook (Core i3 4005U) */
14766         { 0x0a16, 0x1025, 0x0a11, quirk_backlight_present },
14767
14768         /* Apple Macbook 2,1 (Core 2 T7400) */
14769         { 0x27a2, 0x8086, 0x7270, quirk_backlight_present },
14770
14771         /* Apple Macbook 4,1 */
14772         { 0x2a02, 0x106b, 0x00a1, quirk_backlight_present },
14773
14774         /* Toshiba CB35 Chromebook (Celeron 2955U) */
14775         { 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
14776
14777         /* HP Chromebook 14 (Celeron 2955U) */
14778         { 0x0a06, 0x103c, 0x21ed, quirk_backlight_present },
14779
14780         /* Dell Chromebook 11 */
14781         { 0x0a06, 0x1028, 0x0a35, quirk_backlight_present },
14782
14783         /* Dell Chromebook 11 (2015 version) */
14784         { 0x0a16, 0x1028, 0x0a35, quirk_backlight_present },
14785 };
14786
14787 static void intel_init_quirks(struct drm_device *dev)
14788 {
14789         struct pci_dev *d = dev->pdev;
14790         int i;
14791
14792         for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
14793                 struct intel_quirk *q = &intel_quirks[i];
14794
14795                 if (d->device == q->device &&
14796                     (d->subsystem_vendor == q->subsystem_vendor ||
14797                      q->subsystem_vendor == PCI_ANY_ID) &&
14798                     (d->subsystem_device == q->subsystem_device ||
14799                      q->subsystem_device == PCI_ANY_ID))
14800                         q->hook(dev);
14801         }
14802         for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
14803                 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
14804                         intel_dmi_quirks[i].hook(dev);
14805         }
14806 }
14807
14808 /* Disable the VGA plane that we never use */
14809 static void i915_disable_vga(struct drm_device *dev)
14810 {
14811         struct drm_i915_private *dev_priv = dev->dev_private;
14812         u8 sr1;
14813         u32 vga_reg = i915_vgacntrl_reg(dev);
14814
14815         /* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */
14816         vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
14817         outb(SR01, VGA_SR_INDEX);
14818         sr1 = inb(VGA_SR_DATA);
14819         outb(sr1 | 1<<5, VGA_SR_DATA);
14820         vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
14821         udelay(300);
14822
14823         I915_WRITE(vga_reg, VGA_DISP_DISABLE);
14824         POSTING_READ(vga_reg);
14825 }
14826
14827 void intel_modeset_init_hw(struct drm_device *dev)
14828 {
14829         intel_update_cdclk(dev);
14830         intel_prepare_ddi(dev);
14831         intel_init_clock_gating(dev);
14832         intel_enable_gt_powersave(dev);
14833 }
14834
14835 void intel_modeset_init(struct drm_device *dev)
14836 {
14837         struct drm_i915_private *dev_priv = dev->dev_private;
14838         int sprite, ret;
14839         enum pipe pipe;
14840         struct intel_crtc *crtc;
14841
14842         drm_mode_config_init(dev);
14843
14844         dev->mode_config.min_width = 0;
14845         dev->mode_config.min_height = 0;
14846
14847         dev->mode_config.preferred_depth = 24;
14848         dev->mode_config.prefer_shadow = 1;
14849
14850         dev->mode_config.allow_fb_modifiers = true;
14851
14852         dev->mode_config.funcs = &intel_mode_funcs;
14853
14854         intel_init_quirks(dev);
14855
14856         intel_init_pm(dev);
14857
14858         if (INTEL_INFO(dev)->num_pipes == 0)
14859                 return;
14860
14861         /*
14862          * There may be no VBT; and if the BIOS enabled SSC we can
14863          * just keep using it to avoid unnecessary flicker.  Whereas if the
14864          * BIOS isn't using it, don't assume it will work even if the VBT
14865          * indicates as much.
14866          */
14867         if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
14868                 bool bios_lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
14869                                             DREF_SSC1_ENABLE);
14870
14871                 if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
14872                         DRM_DEBUG_KMS("SSC %sabled by BIOS, overriding VBT which says %sabled\n",
14873                                      bios_lvds_use_ssc ? "en" : "dis",
14874                                      dev_priv->vbt.lvds_use_ssc ? "en" : "dis");
14875                         dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
14876                 }
14877         }
14878
14879         intel_init_display(dev);
14880         intel_init_audio(dev);
14881
14882         if (IS_GEN2(dev)) {
14883                 dev->mode_config.max_width = 2048;
14884                 dev->mode_config.max_height = 2048;
14885         } else if (IS_GEN3(dev)) {
14886                 dev->mode_config.max_width = 4096;
14887                 dev->mode_config.max_height = 4096;
14888         } else {
14889                 dev->mode_config.max_width = 8192;
14890                 dev->mode_config.max_height = 8192;
14891         }
14892
14893         if (IS_845G(dev) || IS_I865G(dev)) {
14894                 dev->mode_config.cursor_width = IS_845G(dev) ? 64 : 512;
14895                 dev->mode_config.cursor_height = 1023;
14896         } else if (IS_GEN2(dev)) {
14897                 dev->mode_config.cursor_width = GEN2_CURSOR_WIDTH;
14898                 dev->mode_config.cursor_height = GEN2_CURSOR_HEIGHT;
14899         } else {
14900                 dev->mode_config.cursor_width = MAX_CURSOR_WIDTH;
14901                 dev->mode_config.cursor_height = MAX_CURSOR_HEIGHT;
14902         }
14903
14904         dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
14905
14906         DRM_DEBUG_KMS("%d display pipe%s available.\n",
14907                       INTEL_INFO(dev)->num_pipes,
14908                       INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
14909
14910         for_each_pipe(dev_priv, pipe) {
14911                 intel_crtc_init(dev, pipe);
14912                 for_each_sprite(dev_priv, pipe, sprite) {
14913                         ret = intel_plane_init(dev, pipe, sprite);
14914                         if (ret)
14915                                 DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
14916                                               pipe_name(pipe), sprite_name(pipe, sprite), ret);
14917                 }
14918         }
14919
14920         intel_update_czclk(dev_priv);
14921         intel_update_cdclk(dev);
14922
14923         intel_shared_dpll_init(dev);
14924
14925         /* Just disable it once at startup */
14926         i915_disable_vga(dev);
14927         intel_setup_outputs(dev);
14928
14929         /* Just in case the BIOS is doing something questionable. */
14930         intel_fbc_disable(dev_priv);
14931
14932         drm_modeset_lock_all(dev);
14933         intel_modeset_setup_hw_state(dev);
14934         drm_modeset_unlock_all(dev);
14935
14936         for_each_intel_crtc(dev, crtc) {
14937                 struct intel_initial_plane_config plane_config = {};
14938
14939                 if (!crtc->active)
14940                         continue;
14941
14942                 /*
14943                  * Note that reserving the BIOS fb up front prevents us
14944                  * from stuffing other stolen allocations like the ring
14945                  * on top.  This prevents some ugliness at boot time, and
14946                  * can even allow for smooth boot transitions if the BIOS
14947                  * fb is large enough for the active pipe configuration.
14948                  */
14949                 dev_priv->display.get_initial_plane_config(crtc,
14950                                                            &plane_config);
14951
14952                 /*
14953                  * If the fb is shared between multiple heads, we'll
14954                  * just get the first one.
14955                  */
14956                 intel_find_initial_plane_obj(crtc, &plane_config);
14957         }
14958 }
14959
14960 static void intel_enable_pipe_a(struct drm_device *dev)
14961 {
14962         struct intel_connector *connector;
14963         struct drm_connector *crt = NULL;
14964         struct intel_load_detect_pipe load_detect_temp;
14965         struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
14966
14967         /* We can't just switch on the pipe A, we need to set things up with a
14968          * proper mode and output configuration. As a gross hack, enable pipe A
14969          * by enabling the load detect pipe once. */
14970         for_each_intel_connector(dev, connector) {
14971                 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
14972                         crt = &connector->base;
14973                         break;
14974                 }
14975         }
14976
14977         if (!crt)
14978                 return;
14979
14980         if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp, ctx))
14981                 intel_release_load_detect_pipe(crt, &load_detect_temp, ctx);
14982 }
14983
14984 static bool
14985 intel_check_plane_mapping(struct intel_crtc *crtc)
14986 {
14987         struct drm_device *dev = crtc->base.dev;
14988         struct drm_i915_private *dev_priv = dev->dev_private;
14989         u32 val;
14990
14991         if (INTEL_INFO(dev)->num_pipes == 1)
14992                 return true;
14993
14994         val = I915_READ(DSPCNTR(!crtc->plane));
14995
14996         if ((val & DISPLAY_PLANE_ENABLE) &&
14997             (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
14998                 return false;
14999
15000         return true;
15001 }
15002
15003 static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
15004 {
15005         struct drm_device *dev = crtc->base.dev;
15006         struct intel_encoder *encoder;
15007
15008         for_each_encoder_on_crtc(dev, &crtc->base, encoder)
15009                 return true;
15010
15011         return false;
15012 }
15013
15014 static void intel_sanitize_crtc(struct intel_crtc *crtc)
15015 {
15016         struct drm_device *dev = crtc->base.dev;
15017         struct drm_i915_private *dev_priv = dev->dev_private;
15018         u32 reg;
15019
15020         /* Clear any frame start delays used for debugging left by the BIOS */
15021         reg = PIPECONF(crtc->config->cpu_transcoder);
15022         I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
15023
15024         /* restore vblank interrupts to correct state */
15025         drm_crtc_vblank_reset(&crtc->base);
15026         if (crtc->active) {
15027                 struct intel_plane *plane;
15028
15029                 drm_crtc_vblank_on(&crtc->base);
15030
15031                 /* Disable everything but the primary plane */
15032                 for_each_intel_plane_on_crtc(dev, crtc, plane) {
15033                         if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
15034                                 continue;
15035
15036                         plane->disable_plane(&plane->base, &crtc->base);
15037                 }
15038         }
15039
15040         /* We need to sanitize the plane -> pipe mapping first because this will
15041          * disable the crtc (and hence change the state) if it is wrong. Note
15042          * that gen4+ has a fixed plane -> pipe mapping.  */
15043         if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
15044                 bool plane;
15045
15046                 DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
15047                               crtc->base.base.id);
15048
15049                 /* Pipe has the wrong plane attached and the plane is active.
15050                  * Temporarily change the plane mapping and disable everything
15051                  * ...  */
15052                 plane = crtc->plane;
15053                 to_intel_plane_state(crtc->base.primary->state)->visible = true;
15054                 crtc->plane = !plane;
15055                 intel_crtc_disable_noatomic(&crtc->base);
15056                 crtc->plane = plane;
15057         }
15058
15059         if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
15060             crtc->pipe == PIPE_A && !crtc->active) {
15061                 /* BIOS forgot to enable pipe A, this mostly happens after
15062                  * resume. Force-enable the pipe to fix this, the update_dpms
15063                  * call below we restore the pipe to the right state, but leave
15064                  * the required bits on. */
15065                 intel_enable_pipe_a(dev);
15066         }
15067
15068         /* Adjust the state of the output pipe according to whether we
15069          * have active connectors/encoders. */
15070         if (!intel_crtc_has_encoders(crtc))
15071                 intel_crtc_disable_noatomic(&crtc->base);
15072
15073         if (crtc->active != crtc->base.state->active) {
15074                 struct intel_encoder *encoder;
15075
15076                 /* This can happen either due to bugs in the get_hw_state
15077                  * functions or because of calls to intel_crtc_disable_noatomic,
15078                  * or because the pipe is force-enabled due to the
15079                  * pipe A quirk. */
15080                 DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
15081                               crtc->base.base.id,
15082                               crtc->base.state->enable ? "enabled" : "disabled",
15083                               crtc->active ? "enabled" : "disabled");
15084
15085                 WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, NULL) < 0);
15086                 crtc->base.state->active = crtc->active;
15087                 crtc->base.enabled = crtc->active;
15088
15089                 /* Because we only establish the connector -> encoder ->
15090                  * crtc links if something is active, this means the
15091                  * crtc is now deactivated. Break the links. connector
15092                  * -> encoder links are only establish when things are
15093                  *  actually up, hence no need to break them. */
15094                 WARN_ON(crtc->active);
15095
15096                 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
15097                         encoder->base.crtc = NULL;
15098         }
15099
15100         if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
15101                 /*
15102                  * We start out with underrun reporting disabled to avoid races.
15103                  * For correct bookkeeping mark this on active crtcs.
15104                  *
15105                  * Also on gmch platforms we dont have any hardware bits to
15106                  * disable the underrun reporting. Which means we need to start
15107                  * out with underrun reporting disabled also on inactive pipes,
15108                  * since otherwise we'll complain about the garbage we read when
15109                  * e.g. coming up after runtime pm.
15110                  *
15111                  * No protection against concurrent access is required - at
15112                  * worst a fifo underrun happens which also sets this to false.
15113                  */
15114                 crtc->cpu_fifo_underrun_disabled = true;
15115                 crtc->pch_fifo_underrun_disabled = true;
15116         }
15117 }
15118
15119 static void intel_sanitize_encoder(struct intel_encoder *encoder)
15120 {
15121         struct intel_connector *connector;
15122         struct drm_device *dev = encoder->base.dev;
15123         bool active = false;
15124
15125         /* We need to check both for a crtc link (meaning that the
15126          * encoder is active and trying to read from a pipe) and the
15127          * pipe itself being active. */
15128         bool has_active_crtc = encoder->base.crtc &&
15129                 to_intel_crtc(encoder->base.crtc)->active;
15130
15131         for_each_intel_connector(dev, connector) {
15132                 if (connector->base.encoder != &encoder->base)
15133                         continue;
15134
15135                 active = true;
15136                 break;
15137         }
15138
15139         if (active && !has_active_crtc) {
15140                 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
15141                               encoder->base.base.id,
15142                               encoder->base.name);
15143
15144                 /* Connector is active, but has no active pipe. This is
15145                  * fallout from our resume register restoring. Disable
15146                  * the encoder manually again. */
15147                 if (encoder->base.crtc) {
15148                         DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
15149                                       encoder->base.base.id,
15150                                       encoder->base.name);
15151                         encoder->disable(encoder);
15152                         if (encoder->post_disable)
15153                                 encoder->post_disable(encoder);
15154                 }
15155                 encoder->base.crtc = NULL;
15156
15157                 /* Inconsistent output/port/pipe state happens presumably due to
15158                  * a bug in one of the get_hw_state functions. Or someplace else
15159                  * in our code, like the register restore mess on resume. Clamp
15160                  * things to off as a safer default. */
15161                 for_each_intel_connector(dev, connector) {
15162                         if (connector->encoder != encoder)
15163                                 continue;
15164                         connector->base.dpms = DRM_MODE_DPMS_OFF;
15165                         connector->base.encoder = NULL;
15166                 }
15167         }
15168         /* Enabled encoders without active connectors will be fixed in
15169          * the crtc fixup. */
15170 }
15171
15172 void i915_redisable_vga_power_on(struct drm_device *dev)
15173 {
15174         struct drm_i915_private *dev_priv = dev->dev_private;
15175         u32 vga_reg = i915_vgacntrl_reg(dev);
15176
15177         if (!(I915_READ(vga_reg) & VGA_DISP_DISABLE)) {
15178                 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
15179                 i915_disable_vga(dev);
15180         }
15181 }
15182
15183 void i915_redisable_vga(struct drm_device *dev)
15184 {
15185         struct drm_i915_private *dev_priv = dev->dev_private;
15186
15187         /* This function can be called both from intel_modeset_setup_hw_state or
15188          * at a very early point in our resume sequence, where the power well
15189          * structures are not yet restored. Since this function is at a very
15190          * paranoid "someone might have enabled VGA while we were not looking"
15191          * level, just check if the power well is enabled instead of trying to
15192          * follow the "don't touch the power well if we don't need it" policy
15193          * the rest of the driver uses. */
15194         if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_VGA))
15195                 return;
15196
15197         i915_redisable_vga_power_on(dev);
15198 }
15199
15200 static bool primary_get_hw_state(struct intel_plane *plane)
15201 {
15202         struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
15203
15204         return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
15205 }
15206
15207 /* FIXME read out full plane state for all planes */
15208 static void readout_plane_state(struct intel_crtc *crtc)
15209 {
15210         struct drm_plane *primary = crtc->base.primary;
15211         struct intel_plane_state *plane_state =
15212                 to_intel_plane_state(primary->state);
15213
15214         plane_state->visible =
15215                 primary_get_hw_state(to_intel_plane(primary));
15216
15217         if (plane_state->visible)
15218                 crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
15219 }
15220
15221 static void intel_modeset_readout_hw_state(struct drm_device *dev)
15222 {
15223         struct drm_i915_private *dev_priv = dev->dev_private;
15224         enum pipe pipe;
15225         struct intel_crtc *crtc;
15226         struct intel_encoder *encoder;
15227         struct intel_connector *connector;
15228         int i;
15229
15230         for_each_intel_crtc(dev, crtc) {
15231                 __drm_atomic_helper_crtc_destroy_state(&crtc->base, crtc->base.state);
15232                 memset(crtc->config, 0, sizeof(*crtc->config));
15233                 crtc->config->base.crtc = &crtc->base;
15234
15235                 crtc->active = dev_priv->display.get_pipe_config(crtc,
15236                                                                  crtc->config);
15237
15238                 crtc->base.state->active = crtc->active;
15239                 crtc->base.enabled = crtc->active;
15240
15241                 readout_plane_state(crtc);
15242
15243                 DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
15244                               crtc->base.base.id,
15245                               crtc->active ? "enabled" : "disabled");
15246         }
15247
15248         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
15249                 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
15250
15251                 pll->on = pll->get_hw_state(dev_priv, pll,
15252                                             &pll->config.hw_state);
15253                 pll->active = 0;
15254                 pll->config.crtc_mask = 0;
15255                 for_each_intel_crtc(dev, crtc) {
15256                         if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) {
15257                                 pll->active++;
15258                                 pll->config.crtc_mask |= 1 << crtc->pipe;
15259                         }
15260                 }
15261
15262                 DRM_DEBUG_KMS("%s hw state readout: crtc_mask 0x%08x, on %i\n",
15263                               pll->name, pll->config.crtc_mask, pll->on);
15264
15265                 if (pll->config.crtc_mask)
15266                         intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
15267         }
15268
15269         for_each_intel_encoder(dev, encoder) {
15270                 pipe = 0;
15271
15272                 if (encoder->get_hw_state(encoder, &pipe)) {
15273                         crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
15274                         encoder->base.crtc = &crtc->base;
15275                         encoder->get_config(encoder, crtc->config);
15276                 } else {
15277                         encoder->base.crtc = NULL;
15278                 }
15279
15280                 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
15281                               encoder->base.base.id,
15282                               encoder->base.name,
15283                               encoder->base.crtc ? "enabled" : "disabled",
15284                               pipe_name(pipe));
15285         }
15286
15287         for_each_intel_connector(dev, connector) {
15288                 if (connector->get_hw_state(connector)) {
15289                         connector->base.dpms = DRM_MODE_DPMS_ON;
15290                         connector->base.encoder = &connector->encoder->base;
15291                 } else {
15292                         connector->base.dpms = DRM_MODE_DPMS_OFF;
15293                         connector->base.encoder = NULL;
15294                 }
15295                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
15296                               connector->base.base.id,
15297                               connector->base.name,
15298                               connector->base.encoder ? "enabled" : "disabled");
15299         }
15300
15301         for_each_intel_crtc(dev, crtc) {
15302                 crtc->base.hwmode = crtc->config->base.adjusted_mode;
15303
15304                 memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
15305                 if (crtc->base.state->active) {
15306                         intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
15307                         intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
15308                         WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
15309
15310                         /*
15311                          * The initial mode needs to be set in order to keep
15312                          * the atomic core happy. It wants a valid mode if the
15313                          * crtc's enabled, so we do the above call.
15314                          *
15315                          * At this point some state updated by the connectors
15316                          * in their ->detect() callback has not run yet, so
15317                          * no recalculation can be done yet.
15318                          *
15319                          * Even if we could do a recalculation and modeset
15320                          * right now it would cause a double modeset if
15321                          * fbdev or userspace chooses a different initial mode.
15322                          *
15323                          * If that happens, someone indicated they wanted a
15324                          * mode change, which means it's safe to do a full
15325                          * recalculation.
15326                          */
15327                         crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
15328
15329                         drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
15330                         update_scanline_offset(crtc);
15331                 }
15332         }
15333 }
15334
15335 /* Scan out the current hw modeset state,
15336  * and sanitizes it to the current state
15337  */
15338 static void
15339 intel_modeset_setup_hw_state(struct drm_device *dev)
15340 {
15341         struct drm_i915_private *dev_priv = dev->dev_private;
15342         enum pipe pipe;
15343         struct intel_crtc *crtc;
15344         struct intel_encoder *encoder;
15345         int i;
15346
15347         intel_modeset_readout_hw_state(dev);
15348
15349         /* HW state is read out, now we need to sanitize this mess. */
15350         for_each_intel_encoder(dev, encoder) {
15351                 intel_sanitize_encoder(encoder);
15352         }
15353
15354         for_each_pipe(dev_priv, pipe) {
15355                 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
15356                 intel_sanitize_crtc(crtc);
15357                 intel_dump_pipe_config(crtc, crtc->config,
15358                                        "[setup_hw_state]");
15359         }
15360
15361         intel_modeset_update_connector_atomic_state(dev);
15362
15363         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
15364                 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
15365
15366                 if (!pll->on || pll->active)
15367                         continue;
15368
15369                 DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name);
15370
15371                 pll->disable(dev_priv, pll);
15372                 pll->on = false;
15373         }
15374
15375         if (IS_VALLEYVIEW(dev))
15376                 vlv_wm_get_hw_state(dev);
15377         else if (IS_GEN9(dev))
15378                 skl_wm_get_hw_state(dev);
15379         else if (HAS_PCH_SPLIT(dev))
15380                 ilk_wm_get_hw_state(dev);
15381
15382         for_each_intel_crtc(dev, crtc) {
15383                 unsigned long put_domains;
15384
15385                 put_domains = modeset_get_crtc_power_domains(&crtc->base);
15386                 if (WARN_ON(put_domains))
15387                         modeset_put_power_domains(dev_priv, put_domains);
15388         }
15389         intel_display_set_init_power(dev_priv, false);
15390 }
15391
15392 void intel_display_resume(struct drm_device *dev)
15393 {
15394         struct drm_atomic_state *state = drm_atomic_state_alloc(dev);
15395         struct intel_connector *conn;
15396         struct intel_plane *plane;
15397         struct drm_crtc *crtc;
15398         int ret;
15399
15400         if (!state)
15401                 return;
15402
15403         state->acquire_ctx = dev->mode_config.acquire_ctx;
15404
15405         /* preserve complete old state, including dpll */
15406         intel_atomic_get_shared_dpll_state(state);
15407
15408         for_each_crtc(dev, crtc) {
15409                 struct drm_crtc_state *crtc_state =
15410                         drm_atomic_get_crtc_state(state, crtc);
15411
15412                 ret = PTR_ERR_OR_ZERO(crtc_state);
15413                 if (ret)
15414                         goto err;
15415
15416                 /* force a restore */
15417                 crtc_state->mode_changed = true;
15418         }
15419
15420         for_each_intel_plane(dev, plane) {
15421                 ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(state, &plane->base));
15422                 if (ret)
15423                         goto err;
15424         }
15425
15426         for_each_intel_connector(dev, conn) {
15427                 ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(state, &conn->base));
15428                 if (ret)
15429                         goto err;
15430         }
15431
15432         intel_modeset_setup_hw_state(dev);
15433
15434         i915_redisable_vga(dev);
15435         ret = drm_atomic_commit(state);
15436         if (!ret)
15437                 return;
15438
15439 err:
15440         DRM_ERROR("Restoring old state failed with %i\n", ret);
15441         drm_atomic_state_free(state);
15442 }
15443
15444 void intel_modeset_gem_init(struct drm_device *dev)
15445 {
15446         struct drm_crtc *c;
15447         struct drm_i915_gem_object *obj;
15448         int ret;
15449
15450         mutex_lock(&dev->struct_mutex);
15451         intel_init_gt_powersave(dev);
15452         mutex_unlock(&dev->struct_mutex);
15453
15454         intel_modeset_init_hw(dev);
15455
15456         intel_setup_overlay(dev);
15457
15458         /*
15459          * Make sure any fbs we allocated at startup are properly
15460          * pinned & fenced.  When we do the allocation it's too early
15461          * for this.
15462          */
15463         for_each_crtc(dev, c) {
15464                 obj = intel_fb_obj(c->primary->fb);
15465                 if (obj == NULL)
15466                         continue;
15467
15468                 mutex_lock(&dev->struct_mutex);
15469                 ret = intel_pin_and_fence_fb_obj(c->primary,
15470                                                  c->primary->fb,
15471                                                  c->primary->state,
15472                                                  NULL, NULL);
15473                 mutex_unlock(&dev->struct_mutex);
15474                 if (ret) {
15475                         DRM_ERROR("failed to pin boot fb on pipe %d\n",
15476                                   to_intel_crtc(c)->pipe);
15477                         drm_framebuffer_unreference(c->primary->fb);
15478                         c->primary->fb = NULL;
15479                         c->primary->crtc = c->primary->state->crtc = NULL;
15480                         update_state_fb(c->primary);
15481                         c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
15482                 }
15483         }
15484
15485         intel_backlight_register(dev);
15486 }
15487
15488 void intel_connector_unregister(struct intel_connector *intel_connector)
15489 {
15490         struct drm_connector *connector = &intel_connector->base;
15491
15492         intel_panel_destroy_backlight(connector);
15493         drm_connector_unregister(connector);
15494 }
15495
15496 void intel_modeset_cleanup(struct drm_device *dev)
15497 {
15498         struct drm_i915_private *dev_priv = dev->dev_private;
15499         struct drm_connector *connector;
15500
15501         intel_disable_gt_powersave(dev);
15502
15503         intel_backlight_unregister(dev);
15504
15505         /*
15506          * Interrupts and polling as the first thing to avoid creating havoc.
15507          * Too much stuff here (turning of connectors, ...) would
15508          * experience fancy races otherwise.
15509          */
15510         intel_irq_uninstall(dev_priv);
15511
15512         /*
15513          * Due to the hpd irq storm handling the hotplug work can re-arm the
15514          * poll handlers. Hence disable polling after hpd handling is shut down.
15515          */
15516         drm_kms_helper_poll_fini(dev);
15517
15518         intel_unregister_dsm_handler();
15519
15520         intel_fbc_disable(dev_priv);
15521
15522         /* flush any delayed tasks or pending work */
15523         flush_scheduled_work();
15524
15525         /* destroy the backlight and sysfs files before encoders/connectors */
15526         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
15527                 struct intel_connector *intel_connector;
15528
15529                 intel_connector = to_intel_connector(connector);
15530                 intel_connector->unregister(intel_connector);
15531         }
15532
15533         drm_mode_config_cleanup(dev);
15534
15535         intel_cleanup_overlay(dev);
15536
15537         mutex_lock(&dev->struct_mutex);
15538         intel_cleanup_gt_powersave(dev);
15539         mutex_unlock(&dev->struct_mutex);
15540 }
15541
15542 /*
15543  * Return which encoder is currently attached for connector.
15544  */
15545 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
15546 {
15547         return &intel_attached_encoder(connector)->base;
15548 }
15549
15550 void intel_connector_attach_encoder(struct intel_connector *connector,
15551                                     struct intel_encoder *encoder)
15552 {
15553         connector->encoder = encoder;
15554         drm_mode_connector_attach_encoder(&connector->base,
15555                                           &encoder->base);
15556 }
15557
15558 /*
15559  * set vga decode state - true == enable VGA decode
15560  */
15561 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
15562 {
15563         struct drm_i915_private *dev_priv = dev->dev_private;
15564         unsigned reg = INTEL_INFO(dev)->gen >= 6 ? SNB_GMCH_CTRL : INTEL_GMCH_CTRL;
15565         u16 gmch_ctrl;
15566
15567         if (pci_read_config_word(dev_priv->bridge_dev, reg, &gmch_ctrl)) {
15568                 DRM_ERROR("failed to read control word\n");
15569                 return -EIO;
15570         }
15571
15572         if (!!(gmch_ctrl & INTEL_GMCH_VGA_DISABLE) == !state)
15573                 return 0;
15574
15575         if (state)
15576                 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
15577         else
15578                 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
15579
15580         if (pci_write_config_word(dev_priv->bridge_dev, reg, gmch_ctrl)) {
15581                 DRM_ERROR("failed to write control word\n");
15582                 return -EIO;
15583         }
15584
15585         return 0;
15586 }
15587
15588 struct intel_display_error_state {
15589
15590         u32 power_well_driver;
15591
15592         int num_transcoders;
15593
15594         struct intel_cursor_error_state {
15595                 u32 control;
15596                 u32 position;
15597                 u32 base;
15598                 u32 size;
15599         } cursor[I915_MAX_PIPES];
15600
15601         struct intel_pipe_error_state {
15602                 bool power_domain_on;
15603                 u32 source;
15604                 u32 stat;
15605         } pipe[I915_MAX_PIPES];
15606
15607         struct intel_plane_error_state {
15608                 u32 control;
15609                 u32 stride;
15610                 u32 size;
15611                 u32 pos;
15612                 u32 addr;
15613                 u32 surface;
15614                 u32 tile_offset;
15615         } plane[I915_MAX_PIPES];
15616
15617         struct intel_transcoder_error_state {
15618                 bool power_domain_on;
15619                 enum transcoder cpu_transcoder;
15620
15621                 u32 conf;
15622
15623                 u32 htotal;
15624                 u32 hblank;
15625                 u32 hsync;
15626                 u32 vtotal;
15627                 u32 vblank;
15628                 u32 vsync;
15629         } transcoder[4];
15630 };
15631
15632 struct intel_display_error_state *
15633 intel_display_capture_error_state(struct drm_device *dev)
15634 {
15635         struct drm_i915_private *dev_priv = dev->dev_private;
15636         struct intel_display_error_state *error;
15637         int transcoders[] = {
15638                 TRANSCODER_A,
15639                 TRANSCODER_B,
15640                 TRANSCODER_C,
15641                 TRANSCODER_EDP,
15642         };
15643         int i;
15644
15645         if (INTEL_INFO(dev)->num_pipes == 0)
15646                 return NULL;
15647
15648         error = kzalloc(sizeof(*error), GFP_ATOMIC);
15649         if (error == NULL)
15650                 return NULL;
15651
15652         if (IS_HASWELL(dev) || IS_BROADWELL(dev))
15653                 error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
15654
15655         for_each_pipe(dev_priv, i) {
15656                 error->pipe[i].power_domain_on =
15657                         __intel_display_power_is_enabled(dev_priv,
15658                                                          POWER_DOMAIN_PIPE(i));
15659                 if (!error->pipe[i].power_domain_on)
15660                         continue;
15661
15662                 error->cursor[i].control = I915_READ(CURCNTR(i));
15663                 error->cursor[i].position = I915_READ(CURPOS(i));
15664                 error->cursor[i].base = I915_READ(CURBASE(i));
15665
15666                 error->plane[i].control = I915_READ(DSPCNTR(i));
15667                 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
15668                 if (INTEL_INFO(dev)->gen <= 3) {
15669                         error->plane[i].size = I915_READ(DSPSIZE(i));
15670                         error->plane[i].pos = I915_READ(DSPPOS(i));
15671                 }
15672                 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
15673                         error->plane[i].addr = I915_READ(DSPADDR(i));
15674                 if (INTEL_INFO(dev)->gen >= 4) {
15675                         error->plane[i].surface = I915_READ(DSPSURF(i));
15676                         error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
15677                 }
15678
15679                 error->pipe[i].source = I915_READ(PIPESRC(i));
15680
15681                 if (HAS_GMCH_DISPLAY(dev))
15682                         error->pipe[i].stat = I915_READ(PIPESTAT(i));
15683         }
15684
15685         error->num_transcoders = INTEL_INFO(dev)->num_pipes;
15686         if (HAS_DDI(dev_priv->dev))
15687                 error->num_transcoders++; /* Account for eDP. */
15688
15689         for (i = 0; i < error->num_transcoders; i++) {
15690                 enum transcoder cpu_transcoder = transcoders[i];
15691
15692                 error->transcoder[i].power_domain_on =
15693                         __intel_display_power_is_enabled(dev_priv,
15694                                 POWER_DOMAIN_TRANSCODER(cpu_transcoder));
15695                 if (!error->transcoder[i].power_domain_on)
15696                         continue;
15697
15698                 error->transcoder[i].cpu_transcoder = cpu_transcoder;
15699
15700                 error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
15701                 error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
15702                 error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
15703                 error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
15704                 error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
15705                 error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
15706                 error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
15707         }
15708
15709         return error;
15710 }
15711
15712 #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
15713
15714 void
15715 intel_display_print_error_state(struct drm_i915_error_state_buf *m,
15716                                 struct drm_device *dev,
15717                                 struct intel_display_error_state *error)
15718 {
15719         struct drm_i915_private *dev_priv = dev->dev_private;
15720         int i;
15721
15722         if (!error)
15723                 return;
15724
15725         err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
15726         if (IS_HASWELL(dev) || IS_BROADWELL(dev))
15727                 err_printf(m, "PWR_WELL_CTL2: %08x\n",
15728                            error->power_well_driver);
15729         for_each_pipe(dev_priv, i) {
15730                 err_printf(m, "Pipe [%d]:\n", i);
15731                 err_printf(m, "  Power: %s\n",
15732                            error->pipe[i].power_domain_on ? "on" : "off");
15733                 err_printf(m, "  SRC: %08x\n", error->pipe[i].source);
15734                 err_printf(m, "  STAT: %08x\n", error->pipe[i].stat);
15735
15736                 err_printf(m, "Plane [%d]:\n", i);
15737                 err_printf(m, "  CNTR: %08x\n", error->plane[i].control);
15738                 err_printf(m, "  STRIDE: %08x\n", error->plane[i].stride);
15739                 if (INTEL_INFO(dev)->gen <= 3) {
15740                         err_printf(m, "  SIZE: %08x\n", error->plane[i].size);
15741                         err_printf(m, "  POS: %08x\n", error->plane[i].pos);
15742                 }
15743                 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
15744                         err_printf(m, "  ADDR: %08x\n", error->plane[i].addr);
15745                 if (INTEL_INFO(dev)->gen >= 4) {
15746                         err_printf(m, "  SURF: %08x\n", error->plane[i].surface);
15747                         err_printf(m, "  TILEOFF: %08x\n", error->plane[i].tile_offset);
15748                 }
15749
15750                 err_printf(m, "Cursor [%d]:\n", i);
15751                 err_printf(m, "  CNTR: %08x\n", error->cursor[i].control);
15752                 err_printf(m, "  POS: %08x\n", error->cursor[i].position);
15753                 err_printf(m, "  BASE: %08x\n", error->cursor[i].base);
15754         }
15755
15756         for (i = 0; i < error->num_transcoders; i++) {
15757                 err_printf(m, "CPU transcoder: %c\n",
15758                            transcoder_name(error->transcoder[i].cpu_transcoder));
15759                 err_printf(m, "  Power: %s\n",
15760                            error->transcoder[i].power_domain_on ? "on" : "off");
15761                 err_printf(m, "  CONF: %08x\n", error->transcoder[i].conf);
15762                 err_printf(m, "  HTOTAL: %08x\n", error->transcoder[i].htotal);
15763                 err_printf(m, "  HBLANK: %08x\n", error->transcoder[i].hblank);
15764                 err_printf(m, "  HSYNC: %08x\n", error->transcoder[i].hsync);
15765                 err_printf(m, "  VTOTAL: %08x\n", error->transcoder[i].vtotal);
15766                 err_printf(m, "  VBLANK: %08x\n", error->transcoder[i].vblank);
15767                 err_printf(m, "  VSYNC: %08x\n", error->transcoder[i].vsync);
15768         }
15769 }
15770
15771 void intel_modeset_preclose(struct drm_device *dev, struct drm_file *file)
15772 {
15773         struct intel_crtc *crtc;
15774
15775         for_each_intel_crtc(dev, crtc) {
15776                 struct intel_unpin_work *work;
15777
15778                 spin_lock_irq(&dev->event_lock);
15779
15780                 work = crtc->unpin_work;
15781
15782                 if (work && work->event &&
15783                     work->event->base.file_priv == file) {
15784                         kfree(work->event);
15785                         work->event = NULL;
15786                 }
15787
15788                 spin_unlock_irq(&dev->event_lock);
15789         }
15790 }