2 * SuperH Timer Support - CMT
4 * Copyright (C) 2008 Magnus Damm
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #include <linux/clk.h>
17 #include <linux/clockchips.h>
18 #include <linux/clocksource.h>
19 #include <linux/delay.h>
20 #include <linux/err.h>
21 #include <linux/init.h>
22 #include <linux/interrupt.h>
24 #include <linux/ioport.h>
25 #include <linux/irq.h>
26 #include <linux/module.h>
28 #include <linux/platform_device.h>
29 #include <linux/pm_domain.h>
30 #include <linux/pm_runtime.h>
31 #include <linux/sh_timer.h>
32 #include <linux/slab.h>
33 #include <linux/spinlock.h>
38 * The CMT comes in 5 different identified flavours, depending not only on the
39 * SoC but also on the particular instance. The following table lists the main
40 * characteristics of those flavours.
42 * 16B 32B 32B-F 48B 48B-2
43 * -----------------------------------------------------------------------------
44 * Channels 2 1/4 1 6 2/8
45 * Control Width 16 16 16 16 32
46 * Counter Width 16 32 32 32/48 32/48
47 * Shared Start/Stop Y Y Y Y N
49 * The 48-bit gen2 version has a per-channel start/stop register located in the
50 * channel registers block. All other versions have a shared start/stop register
51 * located in the global space.
53 * Channels are indexed from 0 to N-1 in the documentation. The channel index
54 * infers the start/stop bit position in the control register and the channel
55 * registers block address. Some CMT instances have a subset of channels
56 * available, in which case the index in the documentation doesn't match the
57 * "real" index as implemented in hardware. This is for instance the case with
58 * CMT0 on r8a7740, which is a 32-bit variant with a single channel numbered 0
59 * in the documentation but using start/stop bit 5 and having its registers
62 * Similarly CMT0 on r8a73a4, r8a7790 and r8a7791, while implementing 32-bit
63 * channels only, is a 48-bit gen2 CMT with the 48-bit channels unavailable.
75 enum sh_cmt_model model;
77 unsigned long width; /* 16 or 32 bit version of hardware block */
78 unsigned long overflow_bit;
79 unsigned long clear_bits;
81 /* callbacks for CMSTR and CMCSR access */
82 unsigned long (*read_control)(void __iomem *base, unsigned long offs);
83 void (*write_control)(void __iomem *base, unsigned long offs,
86 /* callbacks for CMCNT and CMCOR access */
87 unsigned long (*read_count)(void __iomem *base, unsigned long offs);
88 void (*write_count)(void __iomem *base, unsigned long offs,
92 struct sh_cmt_channel {
93 struct sh_cmt_device *cmt;
95 unsigned int index; /* Index in the documentation */
96 unsigned int hwidx; /* Real hardware index */
98 void __iomem *iostart;
101 unsigned int timer_bit;
103 unsigned long match_value;
104 unsigned long next_match_value;
105 unsigned long max_match_value;
108 struct clock_event_device ced;
109 struct clocksource cs;
110 unsigned long total_cycles;
114 struct sh_cmt_device {
115 struct platform_device *pdev;
117 const struct sh_cmt_info *info;
119 void __iomem *mapbase;
122 raw_spinlock_t lock; /* Protect the shared start/stop register */
124 struct sh_cmt_channel *channels;
125 unsigned int num_channels;
126 unsigned int hw_channels;
129 bool has_clocksource;
132 #define SH_CMT16_CMCSR_CMF (1 << 7)
133 #define SH_CMT16_CMCSR_CMIE (1 << 6)
134 #define SH_CMT16_CMCSR_CKS8 (0 << 0)
135 #define SH_CMT16_CMCSR_CKS32 (1 << 0)
136 #define SH_CMT16_CMCSR_CKS128 (2 << 0)
137 #define SH_CMT16_CMCSR_CKS512 (3 << 0)
138 #define SH_CMT16_CMCSR_CKS_MASK (3 << 0)
140 #define SH_CMT32_CMCSR_CMF (1 << 15)
141 #define SH_CMT32_CMCSR_OVF (1 << 14)
142 #define SH_CMT32_CMCSR_WRFLG (1 << 13)
143 #define SH_CMT32_CMCSR_STTF (1 << 12)
144 #define SH_CMT32_CMCSR_STPF (1 << 11)
145 #define SH_CMT32_CMCSR_SSIE (1 << 10)
146 #define SH_CMT32_CMCSR_CMS (1 << 9)
147 #define SH_CMT32_CMCSR_CMM (1 << 8)
148 #define SH_CMT32_CMCSR_CMTOUT_IE (1 << 7)
149 #define SH_CMT32_CMCSR_CMR_NONE (0 << 4)
150 #define SH_CMT32_CMCSR_CMR_DMA (1 << 4)
151 #define SH_CMT32_CMCSR_CMR_IRQ (2 << 4)
152 #define SH_CMT32_CMCSR_CMR_MASK (3 << 4)
153 #define SH_CMT32_CMCSR_DBGIVD (1 << 3)
154 #define SH_CMT32_CMCSR_CKS_RCLK8 (4 << 0)
155 #define SH_CMT32_CMCSR_CKS_RCLK32 (5 << 0)
156 #define SH_CMT32_CMCSR_CKS_RCLK128 (6 << 0)
157 #define SH_CMT32_CMCSR_CKS_RCLK1 (7 << 0)
158 #define SH_CMT32_CMCSR_CKS_MASK (7 << 0)
160 static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs)
162 return ioread16(base + (offs << 1));
165 static unsigned long sh_cmt_read32(void __iomem *base, unsigned long offs)
167 return ioread32(base + (offs << 2));
170 static void sh_cmt_write16(void __iomem *base, unsigned long offs,
173 iowrite16(value, base + (offs << 1));
176 static void sh_cmt_write32(void __iomem *base, unsigned long offs,
179 iowrite32(value, base + (offs << 2));
182 static const struct sh_cmt_info sh_cmt_info[] = {
184 .model = SH_CMT_16BIT,
186 .overflow_bit = SH_CMT16_CMCSR_CMF,
187 .clear_bits = ~SH_CMT16_CMCSR_CMF,
188 .read_control = sh_cmt_read16,
189 .write_control = sh_cmt_write16,
190 .read_count = sh_cmt_read16,
191 .write_count = sh_cmt_write16,
194 .model = SH_CMT_32BIT,
196 .overflow_bit = SH_CMT32_CMCSR_CMF,
197 .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
198 .read_control = sh_cmt_read16,
199 .write_control = sh_cmt_write16,
200 .read_count = sh_cmt_read32,
201 .write_count = sh_cmt_write32,
203 [SH_CMT_32BIT_FAST] = {
204 .model = SH_CMT_32BIT_FAST,
206 .overflow_bit = SH_CMT32_CMCSR_CMF,
207 .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
208 .read_control = sh_cmt_read16,
209 .write_control = sh_cmt_write16,
210 .read_count = sh_cmt_read32,
211 .write_count = sh_cmt_write32,
214 .model = SH_CMT_48BIT,
216 .overflow_bit = SH_CMT32_CMCSR_CMF,
217 .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
218 .read_control = sh_cmt_read32,
219 .write_control = sh_cmt_write32,
220 .read_count = sh_cmt_read32,
221 .write_count = sh_cmt_write32,
223 [SH_CMT_48BIT_GEN2] = {
224 .model = SH_CMT_48BIT_GEN2,
226 .overflow_bit = SH_CMT32_CMCSR_CMF,
227 .clear_bits = ~(SH_CMT32_CMCSR_CMF | SH_CMT32_CMCSR_OVF),
228 .read_control = sh_cmt_read32,
229 .write_control = sh_cmt_write32,
230 .read_count = sh_cmt_read32,
231 .write_count = sh_cmt_write32,
235 #define CMCSR 0 /* channel register */
236 #define CMCNT 1 /* channel register */
237 #define CMCOR 2 /* channel register */
239 static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_channel *ch)
242 return ch->cmt->info->read_control(ch->iostart, 0);
244 return ch->cmt->info->read_control(ch->cmt->mapbase, 0);
247 static inline void sh_cmt_write_cmstr(struct sh_cmt_channel *ch,
251 ch->cmt->info->write_control(ch->iostart, 0, value);
253 ch->cmt->info->write_control(ch->cmt->mapbase, 0, value);
256 static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_channel *ch)
258 return ch->cmt->info->read_control(ch->ioctrl, CMCSR);
261 static inline void sh_cmt_write_cmcsr(struct sh_cmt_channel *ch,
264 ch->cmt->info->write_control(ch->ioctrl, CMCSR, value);
267 static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_channel *ch)
269 return ch->cmt->info->read_count(ch->ioctrl, CMCNT);
272 static inline void sh_cmt_write_cmcnt(struct sh_cmt_channel *ch,
275 ch->cmt->info->write_count(ch->ioctrl, CMCNT, value);
278 static inline void sh_cmt_write_cmcor(struct sh_cmt_channel *ch,
281 ch->cmt->info->write_count(ch->ioctrl, CMCOR, value);
284 static unsigned long sh_cmt_get_counter(struct sh_cmt_channel *ch,
287 unsigned long v1, v2, v3;
290 o1 = sh_cmt_read_cmcsr(ch) & ch->cmt->info->overflow_bit;
292 /* Make sure the timer value is stable. Stolen from acpi_pm.c */
295 v1 = sh_cmt_read_cmcnt(ch);
296 v2 = sh_cmt_read_cmcnt(ch);
297 v3 = sh_cmt_read_cmcnt(ch);
298 o1 = sh_cmt_read_cmcsr(ch) & ch->cmt->info->overflow_bit;
299 } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
300 || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
306 static void sh_cmt_start_stop_ch(struct sh_cmt_channel *ch, int start)
308 unsigned long flags, value;
310 /* start stop register shared by multiple timer channels */
311 raw_spin_lock_irqsave(&ch->cmt->lock, flags);
312 value = sh_cmt_read_cmstr(ch);
315 value |= 1 << ch->timer_bit;
317 value &= ~(1 << ch->timer_bit);
319 sh_cmt_write_cmstr(ch, value);
320 raw_spin_unlock_irqrestore(&ch->cmt->lock, flags);
323 static int sh_cmt_enable(struct sh_cmt_channel *ch, unsigned long *rate)
327 pm_runtime_get_sync(&ch->cmt->pdev->dev);
328 dev_pm_syscore_device(&ch->cmt->pdev->dev, true);
331 ret = clk_enable(ch->cmt->clk);
333 dev_err(&ch->cmt->pdev->dev, "ch%u: cannot enable clock\n",
338 /* make sure channel is disabled */
339 sh_cmt_start_stop_ch(ch, 0);
341 /* configure channel, periodic mode and maximum timeout */
342 if (ch->cmt->info->width == 16) {
343 *rate = clk_get_rate(ch->cmt->clk) / 512;
344 sh_cmt_write_cmcsr(ch, SH_CMT16_CMCSR_CMIE |
345 SH_CMT16_CMCSR_CKS512);
347 *rate = clk_get_rate(ch->cmt->clk) / 8;
348 sh_cmt_write_cmcsr(ch, SH_CMT32_CMCSR_CMM |
349 SH_CMT32_CMCSR_CMTOUT_IE |
350 SH_CMT32_CMCSR_CMR_IRQ |
351 SH_CMT32_CMCSR_CKS_RCLK8);
354 sh_cmt_write_cmcor(ch, 0xffffffff);
355 sh_cmt_write_cmcnt(ch, 0);
358 * According to the sh73a0 user's manual, as CMCNT can be operated
359 * only by the RCLK (Pseudo 32 KHz), there's one restriction on
360 * modifying CMCNT register; two RCLK cycles are necessary before
361 * this register is either read or any modification of the value
362 * it holds is reflected in the LSI's actual operation.
364 * While at it, we're supposed to clear out the CMCNT as of this
365 * moment, so make sure it's processed properly here. This will
366 * take RCLKx2 at maximum.
368 for (k = 0; k < 100; k++) {
369 if (!sh_cmt_read_cmcnt(ch))
374 if (sh_cmt_read_cmcnt(ch)) {
375 dev_err(&ch->cmt->pdev->dev, "ch%u: cannot clear CMCNT\n",
382 sh_cmt_start_stop_ch(ch, 1);
386 clk_disable(ch->cmt->clk);
392 static void sh_cmt_disable(struct sh_cmt_channel *ch)
394 /* disable channel */
395 sh_cmt_start_stop_ch(ch, 0);
397 /* disable interrupts in CMT block */
398 sh_cmt_write_cmcsr(ch, 0);
401 clk_disable(ch->cmt->clk);
403 dev_pm_syscore_device(&ch->cmt->pdev->dev, false);
404 pm_runtime_put(&ch->cmt->pdev->dev);
408 #define FLAG_CLOCKEVENT (1 << 0)
409 #define FLAG_CLOCKSOURCE (1 << 1)
410 #define FLAG_REPROGRAM (1 << 2)
411 #define FLAG_SKIPEVENT (1 << 3)
412 #define FLAG_IRQCONTEXT (1 << 4)
414 static void sh_cmt_clock_event_program_verify(struct sh_cmt_channel *ch,
417 unsigned long new_match;
418 unsigned long value = ch->next_match_value;
419 unsigned long delay = 0;
420 unsigned long now = 0;
423 now = sh_cmt_get_counter(ch, &has_wrapped);
424 ch->flags |= FLAG_REPROGRAM; /* force reprogram */
427 /* we're competing with the interrupt handler.
428 * -> let the interrupt handler reprogram the timer.
429 * -> interrupt number two handles the event.
431 ch->flags |= FLAG_SKIPEVENT;
439 /* reprogram the timer hardware,
440 * but don't save the new match value yet.
442 new_match = now + value + delay;
443 if (new_match > ch->max_match_value)
444 new_match = ch->max_match_value;
446 sh_cmt_write_cmcor(ch, new_match);
448 now = sh_cmt_get_counter(ch, &has_wrapped);
449 if (has_wrapped && (new_match > ch->match_value)) {
450 /* we are changing to a greater match value,
451 * so this wrap must be caused by the counter
452 * matching the old value.
453 * -> first interrupt reprograms the timer.
454 * -> interrupt number two handles the event.
456 ch->flags |= FLAG_SKIPEVENT;
461 /* we are changing to a smaller match value,
462 * so the wrap must be caused by the counter
463 * matching the new value.
464 * -> save programmed match value.
465 * -> let isr handle the event.
467 ch->match_value = new_match;
471 /* be safe: verify hardware settings */
472 if (now < new_match) {
473 /* timer value is below match value, all good.
474 * this makes sure we won't miss any match events.
475 * -> save programmed match value.
476 * -> let isr handle the event.
478 ch->match_value = new_match;
482 /* the counter has reached a value greater
483 * than our new match value. and since the
484 * has_wrapped flag isn't set we must have
485 * programmed a too close event.
486 * -> increase delay and retry.
494 dev_warn(&ch->cmt->pdev->dev, "ch%u: too long delay\n",
500 static void __sh_cmt_set_next(struct sh_cmt_channel *ch, unsigned long delta)
502 if (delta > ch->max_match_value)
503 dev_warn(&ch->cmt->pdev->dev, "ch%u: delta out of range\n",
506 ch->next_match_value = delta;
507 sh_cmt_clock_event_program_verify(ch, 0);
510 static void sh_cmt_set_next(struct sh_cmt_channel *ch, unsigned long delta)
514 raw_spin_lock_irqsave(&ch->lock, flags);
515 __sh_cmt_set_next(ch, delta);
516 raw_spin_unlock_irqrestore(&ch->lock, flags);
519 static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id)
521 struct sh_cmt_channel *ch = dev_id;
524 sh_cmt_write_cmcsr(ch, sh_cmt_read_cmcsr(ch) &
525 ch->cmt->info->clear_bits);
527 /* update clock source counter to begin with if enabled
528 * the wrap flag should be cleared by the timer specific
529 * isr before we end up here.
531 if (ch->flags & FLAG_CLOCKSOURCE)
532 ch->total_cycles += ch->match_value + 1;
534 if (!(ch->flags & FLAG_REPROGRAM))
535 ch->next_match_value = ch->max_match_value;
537 ch->flags |= FLAG_IRQCONTEXT;
539 if (ch->flags & FLAG_CLOCKEVENT) {
540 if (!(ch->flags & FLAG_SKIPEVENT)) {
541 if (clockevent_state_oneshot(&ch->ced)) {
542 ch->next_match_value = ch->max_match_value;
543 ch->flags |= FLAG_REPROGRAM;
546 ch->ced.event_handler(&ch->ced);
550 ch->flags &= ~FLAG_SKIPEVENT;
552 if (ch->flags & FLAG_REPROGRAM) {
553 ch->flags &= ~FLAG_REPROGRAM;
554 sh_cmt_clock_event_program_verify(ch, 1);
556 if (ch->flags & FLAG_CLOCKEVENT)
557 if ((clockevent_state_shutdown(&ch->ced))
558 || (ch->match_value == ch->next_match_value))
559 ch->flags &= ~FLAG_REPROGRAM;
562 ch->flags &= ~FLAG_IRQCONTEXT;
567 static int sh_cmt_start(struct sh_cmt_channel *ch, unsigned long flag)
572 raw_spin_lock_irqsave(&ch->lock, flags);
574 if (!(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
575 ret = sh_cmt_enable(ch, &ch->rate);
581 /* setup timeout if no clockevent */
582 if ((flag == FLAG_CLOCKSOURCE) && (!(ch->flags & FLAG_CLOCKEVENT)))
583 __sh_cmt_set_next(ch, ch->max_match_value);
585 raw_spin_unlock_irqrestore(&ch->lock, flags);
590 static void sh_cmt_stop(struct sh_cmt_channel *ch, unsigned long flag)
595 raw_spin_lock_irqsave(&ch->lock, flags);
597 f = ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE);
600 if (f && !(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
603 /* adjust the timeout to maximum if only clocksource left */
604 if ((flag == FLAG_CLOCKEVENT) && (ch->flags & FLAG_CLOCKSOURCE))
605 __sh_cmt_set_next(ch, ch->max_match_value);
607 raw_spin_unlock_irqrestore(&ch->lock, flags);
610 static struct sh_cmt_channel *cs_to_sh_cmt(struct clocksource *cs)
612 return container_of(cs, struct sh_cmt_channel, cs);
615 static cycle_t sh_cmt_clocksource_read(struct clocksource *cs)
617 struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
618 unsigned long flags, raw;
622 raw_spin_lock_irqsave(&ch->lock, flags);
623 value = ch->total_cycles;
624 raw = sh_cmt_get_counter(ch, &has_wrapped);
626 if (unlikely(has_wrapped))
627 raw += ch->match_value + 1;
628 raw_spin_unlock_irqrestore(&ch->lock, flags);
633 static int sh_cmt_clocksource_enable(struct clocksource *cs)
636 struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
638 WARN_ON(ch->cs_enabled);
640 ch->total_cycles = 0;
642 ret = sh_cmt_start(ch, FLAG_CLOCKSOURCE);
644 __clocksource_update_freq_hz(cs, ch->rate);
645 ch->cs_enabled = true;
650 static void sh_cmt_clocksource_disable(struct clocksource *cs)
652 struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
654 WARN_ON(!ch->cs_enabled);
656 sh_cmt_stop(ch, FLAG_CLOCKSOURCE);
657 ch->cs_enabled = false;
660 static void sh_cmt_clocksource_suspend(struct clocksource *cs)
662 struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
667 sh_cmt_stop(ch, FLAG_CLOCKSOURCE);
668 pm_genpd_syscore_poweroff(&ch->cmt->pdev->dev);
671 static void sh_cmt_clocksource_resume(struct clocksource *cs)
673 struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
678 pm_genpd_syscore_poweron(&ch->cmt->pdev->dev);
679 sh_cmt_start(ch, FLAG_CLOCKSOURCE);
682 static int sh_cmt_register_clocksource(struct sh_cmt_channel *ch,
685 struct clocksource *cs = &ch->cs;
689 cs->read = sh_cmt_clocksource_read;
690 cs->enable = sh_cmt_clocksource_enable;
691 cs->disable = sh_cmt_clocksource_disable;
692 cs->suspend = sh_cmt_clocksource_suspend;
693 cs->resume = sh_cmt_clocksource_resume;
694 cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
695 cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
697 dev_info(&ch->cmt->pdev->dev, "ch%u: used as clock source\n",
700 /* Register with dummy 1 Hz value, gets updated in ->enable() */
701 clocksource_register_hz(cs, 1);
705 static struct sh_cmt_channel *ced_to_sh_cmt(struct clock_event_device *ced)
707 return container_of(ced, struct sh_cmt_channel, ced);
710 static void sh_cmt_clock_event_start(struct sh_cmt_channel *ch, int periodic)
712 struct clock_event_device *ced = &ch->ced;
714 sh_cmt_start(ch, FLAG_CLOCKEVENT);
716 /* TODO: calculate good shift from rate and counter bit width */
719 ced->mult = div_sc(ch->rate, NSEC_PER_SEC, ced->shift);
720 ced->max_delta_ns = clockevent_delta2ns(ch->max_match_value, ced);
721 ced->min_delta_ns = clockevent_delta2ns(0x1f, ced);
724 sh_cmt_set_next(ch, ((ch->rate + HZ/2) / HZ) - 1);
726 sh_cmt_set_next(ch, ch->max_match_value);
729 static int sh_cmt_clock_event_shutdown(struct clock_event_device *ced)
731 struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
733 sh_cmt_stop(ch, FLAG_CLOCKEVENT);
737 static int sh_cmt_clock_event_set_state(struct clock_event_device *ced,
740 struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
742 /* deal with old setting first */
743 if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
744 sh_cmt_stop(ch, FLAG_CLOCKEVENT);
746 dev_info(&ch->cmt->pdev->dev, "ch%u: used for %s clock events\n",
747 ch->index, periodic ? "periodic" : "oneshot");
748 sh_cmt_clock_event_start(ch, periodic);
752 static int sh_cmt_clock_event_set_oneshot(struct clock_event_device *ced)
754 return sh_cmt_clock_event_set_state(ced, 0);
757 static int sh_cmt_clock_event_set_periodic(struct clock_event_device *ced)
759 return sh_cmt_clock_event_set_state(ced, 1);
762 static int sh_cmt_clock_event_next(unsigned long delta,
763 struct clock_event_device *ced)
765 struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
767 BUG_ON(!clockevent_state_oneshot(ced));
768 if (likely(ch->flags & FLAG_IRQCONTEXT))
769 ch->next_match_value = delta - 1;
771 sh_cmt_set_next(ch, delta - 1);
776 static void sh_cmt_clock_event_suspend(struct clock_event_device *ced)
778 struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
780 pm_genpd_syscore_poweroff(&ch->cmt->pdev->dev);
781 clk_unprepare(ch->cmt->clk);
784 static void sh_cmt_clock_event_resume(struct clock_event_device *ced)
786 struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
788 clk_prepare(ch->cmt->clk);
789 pm_genpd_syscore_poweron(&ch->cmt->pdev->dev);
792 static int sh_cmt_register_clockevent(struct sh_cmt_channel *ch,
795 struct clock_event_device *ced = &ch->ced;
799 irq = platform_get_irq(ch->cmt->pdev, ch->index);
801 dev_err(&ch->cmt->pdev->dev, "ch%u: failed to get irq\n",
806 ret = request_irq(irq, sh_cmt_interrupt,
807 IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
808 dev_name(&ch->cmt->pdev->dev), ch);
810 dev_err(&ch->cmt->pdev->dev, "ch%u: failed to request irq %d\n",
816 ced->features = CLOCK_EVT_FEAT_PERIODIC;
817 ced->features |= CLOCK_EVT_FEAT_ONESHOT;
819 ced->cpumask = cpu_possible_mask;
820 ced->set_next_event = sh_cmt_clock_event_next;
821 ced->set_state_shutdown = sh_cmt_clock_event_shutdown;
822 ced->set_state_periodic = sh_cmt_clock_event_set_periodic;
823 ced->set_state_oneshot = sh_cmt_clock_event_set_oneshot;
824 ced->suspend = sh_cmt_clock_event_suspend;
825 ced->resume = sh_cmt_clock_event_resume;
827 dev_info(&ch->cmt->pdev->dev, "ch%u: used for clock events\n",
829 clockevents_register_device(ced);
834 static int sh_cmt_register(struct sh_cmt_channel *ch, const char *name,
835 bool clockevent, bool clocksource)
840 ch->cmt->has_clockevent = true;
841 ret = sh_cmt_register_clockevent(ch, name);
847 ch->cmt->has_clocksource = true;
848 sh_cmt_register_clocksource(ch, name);
854 static int sh_cmt_setup_channel(struct sh_cmt_channel *ch, unsigned int index,
855 unsigned int hwidx, bool clockevent,
856 bool clocksource, struct sh_cmt_device *cmt)
860 /* Skip unused channels. */
861 if (!clockevent && !clocksource)
869 * Compute the address of the channel control register block. For the
870 * timers with a per-channel start/stop register, compute its address
873 switch (cmt->info->model) {
875 ch->ioctrl = cmt->mapbase + 2 + ch->hwidx * 6;
879 ch->ioctrl = cmt->mapbase + 0x10 + ch->hwidx * 0x10;
881 case SH_CMT_32BIT_FAST:
883 * The 32-bit "fast" timer has a single channel at hwidx 5 but
884 * is located at offset 0x40 instead of 0x60 for some reason.
886 ch->ioctrl = cmt->mapbase + 0x40;
888 case SH_CMT_48BIT_GEN2:
889 ch->iostart = cmt->mapbase + ch->hwidx * 0x100;
890 ch->ioctrl = ch->iostart + 0x10;
894 if (cmt->info->width == (sizeof(ch->max_match_value) * 8))
895 ch->max_match_value = ~0;
897 ch->max_match_value = (1 << cmt->info->width) - 1;
899 ch->match_value = ch->max_match_value;
900 raw_spin_lock_init(&ch->lock);
902 ch->timer_bit = cmt->info->model == SH_CMT_48BIT_GEN2 ? 0 : ch->hwidx;
904 ret = sh_cmt_register(ch, dev_name(&cmt->pdev->dev),
905 clockevent, clocksource);
907 dev_err(&cmt->pdev->dev, "ch%u: registration failed\n",
911 ch->cs_enabled = false;
916 static int sh_cmt_map_memory(struct sh_cmt_device *cmt)
918 struct resource *mem;
920 mem = platform_get_resource(cmt->pdev, IORESOURCE_MEM, 0);
922 dev_err(&cmt->pdev->dev, "failed to get I/O memory\n");
926 cmt->mapbase = ioremap_nocache(mem->start, resource_size(mem));
927 if (cmt->mapbase == NULL) {
928 dev_err(&cmt->pdev->dev, "failed to remap I/O memory\n");
935 static const struct platform_device_id sh_cmt_id_table[] = {
936 { "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },
937 { "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
940 MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);
942 static const struct of_device_id sh_cmt_of_table[] __maybe_unused = {
943 { .compatible = "renesas,cmt-32", .data = &sh_cmt_info[SH_CMT_32BIT] },
944 { .compatible = "renesas,cmt-32-fast", .data = &sh_cmt_info[SH_CMT_32BIT_FAST] },
945 { .compatible = "renesas,cmt-48", .data = &sh_cmt_info[SH_CMT_48BIT] },
946 { .compatible = "renesas,cmt-48-gen2", .data = &sh_cmt_info[SH_CMT_48BIT_GEN2] },
949 MODULE_DEVICE_TABLE(of, sh_cmt_of_table);
951 static int sh_cmt_parse_dt(struct sh_cmt_device *cmt)
953 struct device_node *np = cmt->pdev->dev.of_node;
955 return of_property_read_u32(np, "renesas,channels-mask",
959 static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
966 raw_spin_lock_init(&cmt->lock);
968 if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
969 const struct of_device_id *id;
971 id = of_match_node(sh_cmt_of_table, pdev->dev.of_node);
972 cmt->info = id->data;
974 ret = sh_cmt_parse_dt(cmt);
977 } else if (pdev->dev.platform_data) {
978 struct sh_timer_config *cfg = pdev->dev.platform_data;
979 const struct platform_device_id *id = pdev->id_entry;
981 cmt->info = (const struct sh_cmt_info *)id->driver_data;
982 cmt->hw_channels = cfg->channels_mask;
984 dev_err(&cmt->pdev->dev, "missing platform data\n");
988 /* Get hold of clock. */
989 cmt->clk = clk_get(&cmt->pdev->dev, "fck");
990 if (IS_ERR(cmt->clk)) {
991 dev_err(&cmt->pdev->dev, "cannot get clock\n");
992 return PTR_ERR(cmt->clk);
995 ret = clk_prepare(cmt->clk);
999 /* Map the memory resource(s). */
1000 ret = sh_cmt_map_memory(cmt);
1002 goto err_clk_unprepare;
1004 /* Allocate and setup the channels. */
1005 cmt->num_channels = hweight8(cmt->hw_channels);
1006 cmt->channels = kzalloc(cmt->num_channels * sizeof(*cmt->channels),
1008 if (cmt->channels == NULL) {
1014 * Use the first channel as a clock event device and the second channel
1015 * as a clock source. If only one channel is available use it for both.
1017 for (i = 0, mask = cmt->hw_channels; i < cmt->num_channels; ++i) {
1018 unsigned int hwidx = ffs(mask) - 1;
1019 bool clocksource = i == 1 || cmt->num_channels == 1;
1020 bool clockevent = i == 0;
1022 ret = sh_cmt_setup_channel(&cmt->channels[i], i, hwidx,
1023 clockevent, clocksource, cmt);
1027 mask &= ~(1 << hwidx);
1030 platform_set_drvdata(pdev, cmt);
1035 kfree(cmt->channels);
1036 iounmap(cmt->mapbase);
1038 clk_unprepare(cmt->clk);
1044 static int sh_cmt_probe(struct platform_device *pdev)
1046 struct sh_cmt_device *cmt = platform_get_drvdata(pdev);
1049 if (!is_early_platform_device(pdev)) {
1050 pm_runtime_set_active(&pdev->dev);
1051 pm_runtime_enable(&pdev->dev);
1055 dev_info(&pdev->dev, "kept as earlytimer\n");
1059 cmt = kzalloc(sizeof(*cmt), GFP_KERNEL);
1063 ret = sh_cmt_setup(cmt, pdev);
1066 pm_runtime_idle(&pdev->dev);
1069 if (is_early_platform_device(pdev))
1073 if (cmt->has_clockevent || cmt->has_clocksource)
1074 pm_runtime_irq_safe(&pdev->dev);
1076 pm_runtime_idle(&pdev->dev);
1081 static int sh_cmt_remove(struct platform_device *pdev)
1083 return -EBUSY; /* cannot unregister clockevent and clocksource */
1086 static struct platform_driver sh_cmt_device_driver = {
1087 .probe = sh_cmt_probe,
1088 .remove = sh_cmt_remove,
1091 .of_match_table = of_match_ptr(sh_cmt_of_table),
1093 .id_table = sh_cmt_id_table,
1096 static int __init sh_cmt_init(void)
1098 return platform_driver_register(&sh_cmt_device_driver);
1101 static void __exit sh_cmt_exit(void)
1103 platform_driver_unregister(&sh_cmt_device_driver);
1106 early_platform_init("earlytimer", &sh_cmt_device_driver);
1107 subsys_initcall(sh_cmt_init);
1108 module_exit(sh_cmt_exit);
1110 MODULE_AUTHOR("Magnus Damm");
1111 MODULE_DESCRIPTION("SuperH CMT Timer Driver");
1112 MODULE_LICENSE("GPL v2");