drivers/Makefile

   1 #
   2 # Makefile for the Linux kernel device drivers.
   3 #
   4 # 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
   5 # Rewritten to use lists instead of if-statements.
   6 #
   7
   8 obj-y                           += irqchip/
   9 obj-y                           += bus/
  10
  11 obj-$(CONFIG_GENERIC_PHY)       += phy/
  12
  13 # GPIO must come after pinctrl as gpios may need to mux pins etc
  14 obj-y                           += pinctrl/
  15 obj-y                           += gpio/
  16 obj-y                           += pwm/
  17 obj-$(CONFIG_PCI)               += pci/
  18 obj-$(CONFIG_PARISC)            += parisc/
  19 obj-$(CONFIG_RAPIDIO)           += rapidio/
  20 obj-y                           += video/
  21 obj-y                           += idle/
  22
  23 # IPMI must come before ACPI in order to provide IPMI opregion support
  24 obj-$(CONFIG_IPMI_HANDLER)      += char/ipmi/
  25
  26 obj-$(CONFIG_ACPI)              += acpi/
  27 obj-$(CONFIG_SFI)               += sfi/
  28 # PnP must come after ACPI since it will eventually need to check if acpi
  29 # was used and do nothing if so
  30 obj-$(CONFIG_PNP)               += pnp/
  31 obj-y                           += amba/
  32 # Many drivers will want to use DMA so this has to be made available
  33 # really early.
  34 obj-$(CONFIG_DMADEVICES)        += dma/
  35
  36 obj-$(CONFIG_VIRTIO)            += virtio/
  37 obj-$(CONFIG_XEN)               += xen/
  38
  39 # regulators early, since some subsystems rely on them to initialize
  40 obj-$(CONFIG_REGULATOR)         += regulator/
  41
  42 # reset controllers early, since gpu drivers might rely on them to initialize
  43 obj-$(CONFIG_RESET_CONTROLLER)  += reset/
  44
  45 # tty/ comes before char/ so that the VT console is the boot-time
  46 # default.
  47 obj-y                           += tty/
  48 obj-y                           += char/
  49
  50 # gpu/ comes after char for AGP vs DRM startup
  51 obj-y                           += gpu/
  52
  53 obj-$(CONFIG_CONNECTOR)         += connector/
  54
  55 # i810fb and intelfb depend on char/agp/
  56 obj-$(CONFIG_FB_I810)           += video/i810/
  57 obj-$(CONFIG_FB_INTEL)          += video/intelfb/
  58
  59 obj-$(CONFIG_PARPORT)           += parport/
  60 obj-y                           += base/ block/ misc/ mfd/ nfc/
  61 obj-$(CONFIG_NUBUS)             += nubus/
  62 obj-y                           += macintosh/
  63 obj-$(CONFIG_IDE)               += ide/
  64 obj-$(CONFIG_SCSI)              += scsi/
  65 obj-$(CONFIG_ATA)               += ata/
  66 obj-$(CONFIG_TARGET_CORE)       += target/
  67 obj-$(CONFIG_MTD)               += mtd/
  68 obj-$(CONFIG_SPI)               += spi/
  69 obj-y                           += hsi/
  70 obj-y                           += net/
  71 obj-$(CONFIG_ATM)               += atm/
  72 obj-$(CONFIG_FUSION)            += message/
  73 obj-y                           += firewire/
  74 obj-$(CONFIG_UIO)               += uio/
  75 obj-$(CONFIG_VFIO)              += vfio/
  76 obj-y                           += cdrom/
  77 obj-y                           += auxdisplay/
  78 obj-$(CONFIG_PCCARD)            += pcmcia/
  79 obj-$(CONFIG_DIO)               += dio/
  80 obj-$(CONFIG_SBUS)              += sbus/
  81 obj-$(CONFIG_ZORRO)             += zorro/
  82 obj-$(CONFIG_MAC)               += macintosh/
  83 obj-$(CONFIG_ATA_OVER_ETH)      += block/aoe/
  84 obj-$(CONFIG_PARIDE)            += block/paride/
  85 obj-$(CONFIG_TC)                += tc/
  86 obj-$(CONFIG_UWB)               += uwb/
  87 obj-$(CONFIG_USB_PHY)           += usb/
  88 obj-$(CONFIG_USB)               += usb/
  89 obj-$(CONFIG_PCI)               += usb/
  90 obj-$(CONFIG_USB_GADGET)        += usb/
  91 obj-$(CONFIG_SERIO)             += input/serio/
  92 obj-$(CONFIG_GAMEPORT)          += input/gameport/
  93 obj-$(CONFIG_INPUT)             += input/
  94 obj-$(CONFIG_I2O)               += message/
  95 obj-$(CONFIG_RTC_LIB)           += rtc/
  96 obj-y                           += i2c/ media/
  97 obj-$(CONFIG_PPS)               += pps/
  98 obj-$(CONFIG_PTP_1588_CLOCK)    += ptp/
  99 obj-$(CONFIG_W1)                += w1/
 100 obj-$(CONFIG_POWER_SUPPLY)      += power/
 101 obj-$(CONFIG_HWMON)             += hwmon/
 102 obj-$(CONFIG_THERMAL)           += thermal/
 103 obj-$(CONFIG_WATCHDOG)          += watchdog/
 104 obj-$(CONFIG_MD)                += md/
 105 obj-$(CONFIG_BT)                += bluetooth/
 106 obj-$(CONFIG_ACCESSIBILITY)     += accessibility/
 107 obj-$(CONFIG_ISDN)              += isdn/
 108 obj-$(CONFIG_EDAC)              += edac/
 109 obj-$(CONFIG_EISA)              += eisa/
 110 obj-y                           += lguest/
 111 obj-$(CONFIG_CPU_FREQ)          += cpufreq/
 112 obj-$(CONFIG_CPU_IDLE)          += cpuidle/
 113 obj-y                           += mmc/
 114 obj-$(CONFIG_MEMSTICK)          += memstick/
 115 obj-y                           += leds/
 116 obj-$(CONFIG_SWITCH)            += switch/
 117 obj-$(CONFIG_INFINIBAND)        += infiniband/
 118 obj-$(CONFIG_SGI_SN)            += sn/
 119 obj-y                           += firmware/
 120 obj-$(CONFIG_CRYPTO)            += crypto/
 121 obj-$(CONFIG_SUPERH)            += sh/
 122 obj-$(CONFIG_ARCH_SHMOBILE)     += sh/
 123 obj-$(CONFIG_SSBI)              += ssbi/
 124 ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
 125 obj-y                           += clocksource/
 126 endif
 127 obj-$(CONFIG_DCA)               += dca/
 128 obj-$(CONFIG_HID)               += hid/
 129 obj-$(CONFIG_PPC_PS3)           += ps3/
 130 obj-$(CONFIG_OF)                += of/
 131 obj-$(CONFIG_SSB)               += ssb/
 132 obj-$(CONFIG_BCMA)              += bcma/
 133 obj-$(CONFIG_VHOST_RING)        += vhost/
 134 obj-$(CONFIG_VLYNQ)             += vlynq/
 135 obj-$(CONFIG_STAGING)           += staging/
 136 obj-y                           += platform/
 137 #common clk code
 138 obj-y                           += clk/
 139
 140 obj-$(CONFIG_MAILBOX)           += mailbox/
 141 obj-$(CONFIG_HWSPINLOCK)        += hwspinlock/
 142 obj-$(CONFIG_NFC)               += nfc/
 143 obj-$(CONFIG_IOMMU_SUPPORT)     += iommu/
 144 obj-$(CONFIG_REMOTEPROC)        += remoteproc/
 145 obj-$(CONFIG_RPMSG)             += rpmsg/
 146
 147 # Virtualization drivers
 148 obj-$(CONFIG_VIRT_DRIVERS)      += virt/
 149 obj-$(CONFIG_HYPERV)            += hv/
 150
 151 obj-$(CONFIG_PM_DEVFREQ)        += devfreq/
 152 obj-$(CONFIG_EXTCON)            += extcon/
 153 obj-$(CONFIG_MEMORY)            += memory/
 154 obj-$(CONFIG_IIO)               += iio/
 155 obj-$(CONFIG_VME_BUS)           += vme/
 156 obj-$(CONFIG_IPACK_BUS)         += ipack/
 157 obj-$(CONFIG_NTB)               += ntb/
 158
 159 obj-$(CONFIG_GATOR)             += gator/
 160 obj-y                           += headset_observe/