Merge tag 'v4.4.76' into linux-linaro-lsk-v4.4
[firefly-linux-kernel-4.4.55.git] / arch / x86 / kernel / vmlinux.lds.S
1 /*
2  * ld script for the x86 kernel
3  *
4  * Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
5  *
6  * Modernisation, unification and other changes and fixes:
7  *   Copyright (C) 2007-2009  Sam Ravnborg <sam@ravnborg.org>
8  *
9  *
10  * Don't define absolute symbols until and unless you know that symbol
11  * value is should remain constant even if kernel image is relocated
12  * at run time. Absolute symbols are not relocated. If symbol value should
13  * change if kernel is relocated, make the symbol section relative and
14  * put it inside the section definition.
15  */
16
17 #ifdef CONFIG_X86_32
18 #define LOAD_OFFSET __PAGE_OFFSET
19 #else
20 #define LOAD_OFFSET __START_KERNEL_map
21 #endif
22
23 #include <asm-generic/vmlinux.lds.h>
24 #include <asm/asm-offsets.h>
25 #include <asm/thread_info.h>
26 #include <asm/page_types.h>
27 #include <asm/cache.h>
28 #include <asm/boot.h>
29
30 #undef i386     /* in case the preprocessor is a 32bit one */
31
32 OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
33
34 #ifdef CONFIG_X86_32
35 OUTPUT_ARCH(i386)
36 ENTRY(phys_startup_32)
37 jiffies = jiffies_64;
38 #else
39 OUTPUT_ARCH(i386:x86-64)
40 ENTRY(phys_startup_64)
41 jiffies_64 = jiffies;
42 #endif
43
44 #if defined(CONFIG_X86_64)
45 /*
46  * On 64-bit, align RODATA to 2MB so we retain large page mappings for
47  * boundaries spanning kernel text, rodata and data sections.
48  *
49  * However, kernel identity mappings will have different RWX permissions
50  * to the pages mapping to text and to the pages padding (which are freed) the
51  * text section. Hence kernel identity mappings will be broken to smaller
52  * pages. For 64-bit, kernel text and kernel identity mappings are different,
53  * so we can enable protection checks as well as retain 2MB large page
54  * mappings for kernel text.
55  */
56 #define X64_ALIGN_RODATA_BEGIN  . = ALIGN(HPAGE_SIZE);
57
58 #define X64_ALIGN_RODATA_END                                    \
59                 . = ALIGN(HPAGE_SIZE);                          \
60                 __end_rodata_hpage_align = .;
61
62 #else
63
64 #define X64_ALIGN_RODATA_BEGIN
65 #define X64_ALIGN_RODATA_END
66
67 #endif
68
69 PHDRS {
70         text PT_LOAD FLAGS(5);          /* R_E */
71         data PT_LOAD FLAGS(6);          /* RW_ */
72 #ifdef CONFIG_X86_64
73 #ifdef CONFIG_SMP
74         percpu PT_LOAD FLAGS(6);        /* RW_ */
75 #endif
76         init PT_LOAD FLAGS(7);          /* RWE */
77 #endif
78         note PT_NOTE FLAGS(0);          /* ___ */
79 }
80
81 SECTIONS
82 {
83 #ifdef CONFIG_X86_32
84         . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
85         phys_startup_32 = startup_32 - LOAD_OFFSET;
86 #else
87         . = __START_KERNEL;
88         phys_startup_64 = startup_64 - LOAD_OFFSET;
89 #endif
90
91         /* Text and read-only data */
92         .text :  AT(ADDR(.text) - LOAD_OFFSET) {
93                 _text = .;
94                 /* bootstrapping code */
95                 HEAD_TEXT
96                 . = ALIGN(8);
97                 _stext = .;
98                 TEXT_TEXT
99                 SCHED_TEXT
100                 LOCK_TEXT
101                 KPROBES_TEXT
102                 ENTRY_TEXT
103                 IRQENTRY_TEXT
104                 *(.fixup)
105                 *(.gnu.warning)
106                 /* End of text section */
107                 _etext = .;
108         } :text = 0x9090
109
110         NOTES :text :note
111
112         EXCEPTION_TABLE(16) :text = 0x9090
113
114         /* .text should occupy whole number of pages */
115         . = ALIGN(PAGE_SIZE);
116         X64_ALIGN_RODATA_BEGIN
117         RO_DATA(PAGE_SIZE)
118         X64_ALIGN_RODATA_END
119
120         /* Data */
121         .data : AT(ADDR(.data) - LOAD_OFFSET) {
122                 /* Start of data section */
123                 _sdata = .;
124
125                 /* init_task */
126                 INIT_TASK_DATA(THREAD_SIZE)
127
128 #ifdef CONFIG_X86_32
129                 /* 32 bit has nosave before _edata */
130                 NOSAVE_DATA
131 #endif
132
133                 PAGE_ALIGNED_DATA(PAGE_SIZE)
134
135                 CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
136
137                 DATA_DATA
138                 CONSTRUCTORS
139
140                 /* rarely changed data like cpu maps */
141                 READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES)
142
143                 /* End of data section */
144                 _edata = .;
145         } :data
146
147
148         . = ALIGN(PAGE_SIZE);
149         __vvar_page = .;
150
151         .vvar : AT(ADDR(.vvar) - LOAD_OFFSET) {
152                 /* work around gold bug 13023 */
153                 __vvar_beginning_hack = .;
154
155                 /* Place all vvars at the offsets in asm/vvar.h. */
156 #define EMIT_VVAR(name, offset)                         \
157                 . = __vvar_beginning_hack + offset;     \
158                 *(.vvar_ ## name)
159 #define __VVAR_KERNEL_LDS
160 #include <asm/vvar.h>
161 #undef __VVAR_KERNEL_LDS
162 #undef EMIT_VVAR
163
164                 /*
165                  * Pad the rest of the page with zeros.  Otherwise the loader
166                  * can leave garbage here.
167                  */
168                 . = __vvar_beginning_hack + PAGE_SIZE;
169         } :data
170
171        . = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE);
172
173         /* Init code and data - will be freed after init */
174         . = ALIGN(PAGE_SIZE);
175         .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
176                 __init_begin = .; /* paired with __init_end */
177         }
178
179 #if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
180         /*
181          * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
182          * output PHDR, so the next output section - .init.text - should
183          * start another segment - init.
184          */
185         PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu)
186         ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START,
187                "per-CPU data too large - increase CONFIG_PHYSICAL_START")
188 #endif
189
190         INIT_TEXT_SECTION(PAGE_SIZE)
191 #ifdef CONFIG_X86_64
192         :init
193 #endif
194
195         INIT_DATA_SECTION(16)
196
197         .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
198                 __x86_cpu_dev_start = .;
199                 *(.x86_cpu_dev.init)
200                 __x86_cpu_dev_end = .;
201         }
202
203 #ifdef CONFIG_X86_INTEL_MID
204         .x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \
205                                                                 LOAD_OFFSET) {
206                 __x86_intel_mid_dev_start = .;
207                 *(.x86_intel_mid_dev.init)
208                 __x86_intel_mid_dev_end = .;
209         }
210 #endif
211
212         /*
213          * start address and size of operations which during runtime
214          * can be patched with virtualization friendly instructions or
215          * baremetal native ones. Think page table operations.
216          * Details in paravirt_types.h
217          */
218         . = ALIGN(8);
219         .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
220                 __parainstructions = .;
221                 *(.parainstructions)
222                 __parainstructions_end = .;
223         }
224
225         /*
226          * struct alt_inst entries. From the header (alternative.h):
227          * "Alternative instructions for different CPU types or capabilities"
228          * Think locking instructions on spinlocks.
229          */
230         . = ALIGN(8);
231         .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
232                 __alt_instructions = .;
233                 *(.altinstructions)
234                 __alt_instructions_end = .;
235         }
236
237         /*
238          * And here are the replacement instructions. The linker sticks
239          * them as binary blobs. The .altinstructions has enough data to
240          * get the address and the length of them to patch the kernel safely.
241          */
242         .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
243                 *(.altinstr_replacement)
244         }
245
246         /*
247          * struct iommu_table_entry entries are injected in this section.
248          * It is an array of IOMMUs which during run time gets sorted depending
249          * on its dependency order. After rootfs_initcall is complete
250          * this section can be safely removed.
251          */
252         .iommu_table : AT(ADDR(.iommu_table) - LOAD_OFFSET) {
253                 __iommu_table = .;
254                 *(.iommu_table)
255                 __iommu_table_end = .;
256         }
257
258         . = ALIGN(8);
259         .apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) {
260                 __apicdrivers = .;
261                 *(.apicdrivers);
262                 __apicdrivers_end = .;
263         }
264
265         . = ALIGN(8);
266         /*
267          * .exit.text is discard at runtime, not link time, to deal with
268          *  references from .altinstructions and .eh_frame
269          */
270         .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
271                 EXIT_TEXT
272         }
273
274         .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
275                 EXIT_DATA
276         }
277
278 #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
279         PERCPU_SECTION(INTERNODE_CACHE_BYTES)
280 #endif
281
282         . = ALIGN(PAGE_SIZE);
283
284         /* freed after init ends here */
285         .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
286                 __init_end = .;
287         }
288
289         /*
290          * smp_locks might be freed after init
291          * start/end must be page aligned
292          */
293         . = ALIGN(PAGE_SIZE);
294         .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
295                 __smp_locks = .;
296                 *(.smp_locks)
297                 . = ALIGN(PAGE_SIZE);
298                 __smp_locks_end = .;
299         }
300
301 #ifdef CONFIG_X86_64
302         .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
303                 NOSAVE_DATA
304         }
305 #endif
306
307         /* BSS */
308         . = ALIGN(PAGE_SIZE);
309         .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
310                 __bss_start = .;
311                 *(.bss..page_aligned)
312                 *(.bss)
313                 . = ALIGN(PAGE_SIZE);
314                 __bss_stop = .;
315         }
316
317         . = ALIGN(PAGE_SIZE);
318         .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
319                 __brk_base = .;
320                 . += 64 * 1024;         /* 64k alignment slop space */
321                 *(.brk_reservation)     /* areas brk users have reserved */
322                 __brk_limit = .;
323         }
324
325         _end = .;
326
327         STABS_DEBUG
328         DWARF_DEBUG
329
330         /* Sections to be discarded */
331         DISCARDS
332         /DISCARD/ : { *(.eh_frame) }
333 }
334
335
336 #ifdef CONFIG_X86_32
337 /*
338  * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
339  */
340 . = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
341            "kernel image bigger than KERNEL_IMAGE_SIZE");
342 #else
343 /*
344  * Per-cpu symbols which need to be offset from __per_cpu_load
345  * for the boot processor.
346  */
347 #define INIT_PER_CPU(x) init_per_cpu__##x = x + __per_cpu_load
348 INIT_PER_CPU(gdt_page);
349 INIT_PER_CPU(irq_stack_union);
350
351 /*
352  * Build-time check on the image size:
353  */
354 . = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
355            "kernel image bigger than KERNEL_IMAGE_SIZE");
356
357 #ifdef CONFIG_SMP
358 . = ASSERT((irq_stack_union == 0),
359            "irq_stack_union is not at start of per-cpu area");
360 #endif
361
362 #endif /* CONFIG_X86_32 */
363
364 #ifdef CONFIG_KEXEC_CORE
365 #include <asm/kexec.h>
366
367 . = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
368            "kexec control code size is too big");
369 #endif
370