cgroup: superblock can't be released with active dentries
[firefly-linux-kernel-4.4.55.git] / arch / tile / kernel / signal.c
1 /*
2  * Copyright (C) 1991, 1992  Linus Torvalds
3  * Copyright 2010 Tilera Corporation. All Rights Reserved.
4  *
5  *   This program is free software; you can redistribute it and/or
6  *   modify it under the terms of the GNU General Public License
7  *   as published by the Free Software Foundation, version 2.
8  *
9  *   This program is distributed in the hope that it will be useful, but
10  *   WITHOUT ANY WARRANTY; without even the implied warranty of
11  *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
12  *   NON INFRINGEMENT.  See the GNU General Public License for
13  *   more details.
14  */
15
16 #include <linux/sched.h>
17 #include <linux/mm.h>
18 #include <linux/smp.h>
19 #include <linux/kernel.h>
20 #include <linux/signal.h>
21 #include <linux/errno.h>
22 #include <linux/wait.h>
23 #include <linux/unistd.h>
24 #include <linux/stddef.h>
25 #include <linux/personality.h>
26 #include <linux/suspend.h>
27 #include <linux/ptrace.h>
28 #include <linux/elf.h>
29 #include <linux/compat.h>
30 #include <linux/syscalls.h>
31 #include <linux/uaccess.h>
32 #include <asm/processor.h>
33 #include <asm/ucontext.h>
34 #include <asm/sigframe.h>
35 #include <asm/syscalls.h>
36 #include <arch/interrupts.h>
37
38 #define DEBUG_SIG 0
39
40 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
41
42 SYSCALL_DEFINE3(sigaltstack, const stack_t __user *, uss,
43                 stack_t __user *, uoss, struct pt_regs *, regs)
44 {
45         return do_sigaltstack(uss, uoss, regs->sp);
46 }
47
48
49 /*
50  * Do a signal return; undo the signal stack.
51  */
52
53 int restore_sigcontext(struct pt_regs *regs,
54                        struct sigcontext __user *sc)
55 {
56         int err = 0;
57         int i;
58
59         /* Always make any pending restarted system calls return -EINTR */
60         current_thread_info()->restart_block.fn = do_no_restart_syscall;
61
62         /*
63          * Enforce that sigcontext is like pt_regs, and doesn't mess
64          * up our stack alignment rules.
65          */
66         BUILD_BUG_ON(sizeof(struct sigcontext) != sizeof(struct pt_regs));
67         BUILD_BUG_ON(sizeof(struct sigcontext) % 8 != 0);
68
69         for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
70                 err |= __get_user(regs->regs[i], &sc->gregs[i]);
71
72         /* Ensure that the PL is always set to USER_PL. */
73         regs->ex1 = PL_ICS_EX1(USER_PL, EX1_ICS(regs->ex1));
74
75         regs->faultnum = INT_SWINT_1_SIGRETURN;
76
77         return err;
78 }
79
80 void signal_fault(const char *type, struct pt_regs *regs,
81                   void __user *frame, int sig)
82 {
83         trace_unhandled_signal(type, regs, (unsigned long)frame, SIGSEGV);
84         force_sigsegv(sig, current);
85 }
86
87 /* The assembly shim for this function arranges to ignore the return value. */
88 SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
89 {
90         struct rt_sigframe __user *frame =
91                 (struct rt_sigframe __user *)(regs->sp);
92         sigset_t set;
93
94         if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
95                 goto badframe;
96         if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
97                 goto badframe;
98
99         sigdelsetmask(&set, ~_BLOCKABLE);
100         set_current_blocked(&set);
101
102         if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
103                 goto badframe;
104
105         if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
106                 goto badframe;
107
108         return 0;
109
110 badframe:
111         signal_fault("bad sigreturn frame", regs, frame, 0);
112         return 0;
113 }
114
115 /*
116  * Set up a signal frame.
117  */
118
119 int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
120 {
121         int i, err = 0;
122
123         for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
124                 err |= __put_user(regs->regs[i], &sc->gregs[i]);
125
126         return err;
127 }
128
129 /*
130  * Determine which stack to use..
131  */
132 static inline void __user *get_sigframe(struct k_sigaction *ka,
133                                         struct pt_regs *regs,
134                                         size_t frame_size)
135 {
136         unsigned long sp;
137
138         /* Default to using normal stack */
139         sp = regs->sp;
140
141         /*
142          * If we are on the alternate signal stack and would overflow
143          * it, don't.  Return an always-bogus address instead so we
144          * will die with SIGSEGV.
145          */
146         if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size)))
147                 return (void __user __force *)-1UL;
148
149         /* This is the X/Open sanctioned signal stack switching.  */
150         if (ka->sa.sa_flags & SA_ONSTACK) {
151                 if (sas_ss_flags(sp) == 0)
152                         sp = current->sas_ss_sp + current->sas_ss_size;
153         }
154
155         sp -= frame_size;
156         /*
157          * Align the stack pointer according to the TILE ABI,
158          * i.e. so that on function entry (sp & 15) == 0.
159          */
160         sp &= -16UL;
161         return (void __user *) sp;
162 }
163
164 static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
165                            sigset_t *set, struct pt_regs *regs)
166 {
167         unsigned long restorer;
168         struct rt_sigframe __user *frame;
169         int err = 0;
170         int usig;
171
172         frame = get_sigframe(ka, regs, sizeof(*frame));
173
174         if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
175                 goto give_sigsegv;
176
177         usig = current_thread_info()->exec_domain
178                 && current_thread_info()->exec_domain->signal_invmap
179                 && sig < 32
180                 ? current_thread_info()->exec_domain->signal_invmap[sig]
181                 : sig;
182
183         /* Always write at least the signal number for the stack backtracer. */
184         if (ka->sa.sa_flags & SA_SIGINFO) {
185                 /* At sigreturn time, restore the callee-save registers too. */
186                 err |= copy_siginfo_to_user(&frame->info, info);
187                 regs->flags |= PT_FLAGS_RESTORE_REGS;
188         } else {
189                 err |= __put_user(info->si_signo, &frame->info.si_signo);
190         }
191
192         /* Create the ucontext.  */
193         err |= __clear_user(&frame->save_area, sizeof(frame->save_area));
194         err |= __put_user(0, &frame->uc.uc_flags);
195         err |= __put_user(NULL, &frame->uc.uc_link);
196         err |= __put_user((void __user *)(current->sas_ss_sp),
197                           &frame->uc.uc_stack.ss_sp);
198         err |= __put_user(sas_ss_flags(regs->sp),
199                           &frame->uc.uc_stack.ss_flags);
200         err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
201         err |= setup_sigcontext(&frame->uc.uc_mcontext, regs);
202         err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
203         if (err)
204                 goto give_sigsegv;
205
206         restorer = VDSO_BASE;
207         if (ka->sa.sa_flags & SA_RESTORER)
208                 restorer = (unsigned long) ka->sa.sa_restorer;
209
210         /*
211          * Set up registers for signal handler.
212          * Registers that we don't modify keep the value they had from
213          * user-space at the time we took the signal.
214          * We always pass siginfo and mcontext, regardless of SA_SIGINFO,
215          * since some things rely on this (e.g. glibc's debug/segfault.c).
216          */
217         regs->pc = (unsigned long) ka->sa.sa_handler;
218         regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
219         regs->sp = (unsigned long) frame;
220         regs->lr = restorer;
221         regs->regs[0] = (unsigned long) usig;
222         regs->regs[1] = (unsigned long) &frame->info;
223         regs->regs[2] = (unsigned long) &frame->uc;
224         regs->flags |= PT_FLAGS_CALLER_SAVES;
225
226         /*
227          * Notify any tracer that was single-stepping it.
228          * The tracer may want to single-step inside the
229          * handler too.
230          */
231         if (test_thread_flag(TIF_SINGLESTEP))
232                 ptrace_notify(SIGTRAP);
233
234         return 0;
235
236 give_sigsegv:
237         signal_fault("bad setup frame", regs, frame, sig);
238         return -EFAULT;
239 }
240
241 /*
242  * OK, we're invoking a handler
243  */
244
245 static int handle_signal(unsigned long sig, siginfo_t *info,
246                          struct k_sigaction *ka, sigset_t *oldset,
247                          struct pt_regs *regs)
248 {
249         int ret;
250
251         /* Are we from a system call? */
252         if (regs->faultnum == INT_SWINT_1) {
253                 /* If so, check system call restarting.. */
254                 switch (regs->regs[0]) {
255                 case -ERESTART_RESTARTBLOCK:
256                 case -ERESTARTNOHAND:
257                         regs->regs[0] = -EINTR;
258                         break;
259
260                 case -ERESTARTSYS:
261                         if (!(ka->sa.sa_flags & SA_RESTART)) {
262                                 regs->regs[0] = -EINTR;
263                                 break;
264                         }
265                         /* fallthrough */
266                 case -ERESTARTNOINTR:
267                         /* Reload caller-saves to restore r0..r5 and r10. */
268                         regs->flags |= PT_FLAGS_CALLER_SAVES;
269                         regs->regs[0] = regs->orig_r0;
270                         regs->pc -= 8;
271                 }
272         }
273
274         /* Set up the stack frame */
275 #ifdef CONFIG_COMPAT
276         if (is_compat_task())
277                 ret = compat_setup_rt_frame(sig, ka, info, oldset, regs);
278         else
279 #endif
280                 ret = setup_rt_frame(sig, ka, info, oldset, regs);
281         if (ret == 0) {
282                 /* This code is only called from system calls or from
283                  * the work_pending path in the return-to-user code, and
284                  * either way we can re-enable interrupts unconditionally.
285                  */
286                 block_sigmask(ka, sig);
287         }
288
289         return ret;
290 }
291
292 /*
293  * Note that 'init' is a special process: it doesn't get signals it doesn't
294  * want to handle. Thus you cannot kill init even with a SIGKILL even by
295  * mistake.
296  */
297 void do_signal(struct pt_regs *regs)
298 {
299         siginfo_t info;
300         int signr;
301         struct k_sigaction ka;
302         sigset_t *oldset;
303
304         /*
305          * i386 will check if we're coming from kernel mode and bail out
306          * here.  In my experience this just turns weird crashes into
307          * weird spin-hangs.  But if we find a case where this seems
308          * helpful, we can reinstate the check on "!user_mode(regs)".
309          */
310
311         if (current_thread_info()->status & TS_RESTORE_SIGMASK)
312                 oldset = &current->saved_sigmask;
313         else
314                 oldset = &current->blocked;
315
316         signr = get_signal_to_deliver(&info, &ka, regs, NULL);
317         if (signr > 0) {
318                 /* Whee! Actually deliver the signal.  */
319                 if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
320                         /*
321                          * A signal was successfully delivered; the saved
322                          * sigmask will have been stored in the signal frame,
323                          * and will be restored by sigreturn, so we can simply
324                          * clear the TS_RESTORE_SIGMASK flag.
325                          */
326                         current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
327                 }
328
329                 goto done;
330         }
331
332         /* Did we come from a system call? */
333         if (regs->faultnum == INT_SWINT_1) {
334                 /* Restart the system call - no handlers present */
335                 switch (regs->regs[0]) {
336                 case -ERESTARTNOHAND:
337                 case -ERESTARTSYS:
338                 case -ERESTARTNOINTR:
339                         regs->flags |= PT_FLAGS_CALLER_SAVES;
340                         regs->regs[0] = regs->orig_r0;
341                         regs->pc -= 8;
342                         break;
343
344                 case -ERESTART_RESTARTBLOCK:
345                         regs->flags |= PT_FLAGS_CALLER_SAVES;
346                         regs->regs[TREG_SYSCALL_NR] = __NR_restart_syscall;
347                         regs->pc -= 8;
348                         break;
349                 }
350         }
351
352         /* If there's no signal to deliver, just put the saved sigmask back. */
353         if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
354                 current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
355                 sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
356         }
357
358 done:
359         /* Avoid double syscall restart if there are nested signals. */
360         regs->faultnum = INT_SWINT_1_SIGRETURN;
361 }
362
363 int show_unhandled_signals = 1;
364
365 static int __init crashinfo(char *str)
366 {
367         unsigned long val;
368         const char *word;
369
370         if (*str == '\0')
371                 val = 2;
372         else if (*str != '=' || strict_strtoul(++str, 0, &val) != 0)
373                 return 0;
374         show_unhandled_signals = val;
375         switch (show_unhandled_signals) {
376         case 0:
377                 word = "No";
378                 break;
379         case 1:
380                 word = "One-line";
381                 break;
382         default:
383                 word = "Detailed";
384                 break;
385         }
386         pr_info("%s crash reports will be generated on the console\n", word);
387         return 1;
388 }
389 __setup("crashinfo", crashinfo);
390
391 static void dump_mem(void __user *address)
392 {
393         void __user *addr;
394         enum { region_size = 256, bytes_per_line = 16 };
395         int i, j, k;
396         int found_readable_mem = 0;
397
398         pr_err("\n");
399         if (!access_ok(VERIFY_READ, address, 1)) {
400                 pr_err("Not dumping at address 0x%lx (kernel address)\n",
401                        (unsigned long)address);
402                 return;
403         }
404
405         addr = (void __user *)
406                 (((unsigned long)address & -bytes_per_line) - region_size/2);
407         if (addr > address)
408                 addr = NULL;
409         for (i = 0; i < region_size;
410              addr += bytes_per_line, i += bytes_per_line) {
411                 unsigned char buf[bytes_per_line];
412                 char line[100];
413                 if (copy_from_user(buf, addr, bytes_per_line))
414                         continue;
415                 if (!found_readable_mem) {
416                         pr_err("Dumping memory around address 0x%lx:\n",
417                                (unsigned long)address);
418                         found_readable_mem = 1;
419                 }
420                 j = sprintf(line, REGFMT":", (unsigned long)addr);
421                 for (k = 0; k < bytes_per_line; ++k)
422                         j += sprintf(&line[j], " %02x", buf[k]);
423                 pr_err("%s\n", line);
424         }
425         if (!found_readable_mem)
426                 pr_err("No readable memory around address 0x%lx\n",
427                        (unsigned long)address);
428 }
429
430 void trace_unhandled_signal(const char *type, struct pt_regs *regs,
431                             unsigned long address, int sig)
432 {
433         struct task_struct *tsk = current;
434
435         if (show_unhandled_signals == 0)
436                 return;
437
438         /* If the signal is handled, don't show it here. */
439         if (!is_global_init(tsk)) {
440                 void __user *handler =
441                         tsk->sighand->action[sig-1].sa.sa_handler;
442                 if (handler != SIG_IGN && handler != SIG_DFL)
443                         return;
444         }
445
446         /* Rate-limit the one-line output, not the detailed output. */
447         if (show_unhandled_signals <= 1 && !printk_ratelimit())
448                 return;
449
450         printk("%s%s[%d]: %s at %lx pc "REGFMT" signal %d",
451                task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
452                tsk->comm, task_pid_nr(tsk), type, address, regs->pc, sig);
453
454         print_vma_addr(KERN_CONT " in ", regs->pc);
455
456         printk(KERN_CONT "\n");
457
458         if (show_unhandled_signals > 1) {
459                 switch (sig) {
460                 case SIGILL:
461                 case SIGFPE:
462                 case SIGSEGV:
463                 case SIGBUS:
464                         pr_err("User crash: signal %d,"
465                                " trap %ld, address 0x%lx\n",
466                                sig, regs->faultnum, address);
467                         show_regs(regs);
468                         dump_mem((void __user *)address);
469                         break;
470                 default:
471                         pr_err("User crash: signal %d, trap %ld\n",
472                                sig, regs->faultnum);
473                         break;
474                 }
475         }
476 }