x86, gcc-4.6: Fix set but not read variables
[firefly-linux-kernel-4.4.55.git] / arch / mips / include / asm / mach-pb1x00 / pb1550.h
1 /*
2  * AMD Alchemy Semi PB1550 Referrence Board
3  * Board Registers defines.
4  *
5  * Copyright 2004 Embedded Edge LLC.
6  * Copyright 2005 Ralf Baechle (ralf@linux-mips.org)
7  *
8  * ########################################################################
9  *
10  *  This program is free software; you can distribute it and/or modify it
11  *  under the terms of the GNU General Public License (Version 2) as
12  *  published by the Free Software Foundation.
13  *
14  *  This program is distributed in the hope it will be useful, but WITHOUT
15  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
16  *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
17  *  for more details.
18  *
19  *  You should have received a copy of the GNU General Public License along
20  *  with this program; if not, write to the Free Software Foundation, Inc.,
21  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
22  *
23  * ########################################################################
24  *
25  *
26  */
27 #ifndef __ASM_PB1550_H
28 #define __ASM_PB1550_H
29
30 #include <linux/types.h>
31 #include <asm/mach-au1x00/au1xxx_psc.h>
32
33 #define DBDMA_AC97_TX_CHAN      DSCR_CMD0_PSC1_TX
34 #define DBDMA_AC97_RX_CHAN      DSCR_CMD0_PSC1_RX
35 #define DBDMA_I2S_TX_CHAN       DSCR_CMD0_PSC3_TX
36 #define DBDMA_I2S_RX_CHAN       DSCR_CMD0_PSC3_RX
37
38 #define SPI_PSC_BASE            PSC0_BASE_ADDR
39 #define AC97_PSC_BASE           PSC1_BASE_ADDR
40 #define SMBUS_PSC_BASE          PSC2_BASE_ADDR
41 #define I2S_PSC_BASE            PSC3_BASE_ADDR
42
43 #if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
44 #define PB1550_BOTH_BANKS
45 #elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
46 #define PB1550_BOOT_ONLY
47 #elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
48 #define PB1550_USER_ONLY
49 #endif
50
51 /*
52  * Timing values as described in databook, * ns value stripped of
53  * lower 2 bits.
54  * These defines are here rather than an SOC1550 generic file because
55  * the parts chosen on another board may be different and may require
56  * different timings.
57  */
58 #define NAND_T_H                (18 >> 2)
59 #define NAND_T_PUL              (30 >> 2)
60 #define NAND_T_SU               (30 >> 2)
61 #define NAND_T_WH               (30 >> 2)
62
63 /* Bitfield shift amounts */
64 #define NAND_T_H_SHIFT          0
65 #define NAND_T_PUL_SHIFT        4
66 #define NAND_T_SU_SHIFT         8
67 #define NAND_T_WH_SHIFT         12
68
69 #define NAND_TIMING     (((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
70                          ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
71                          ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
72                          ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
73
74 #define NAND_CS 1
75
76 /* Should be done by YAMON */
77 #define NAND_STCFG      0x00400005 /* 8-bit NAND */
78 #define NAND_STTIME     0x00007774 /* valid for 396 MHz SD=2 only */
79 #define NAND_STADDR     0x12000FFF /* physical address 0x20000000 */
80
81 #endif /* __ASM_PB1550_H */