2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2008-2009 Bluetechnix
4 * 2005 National ICT Australia (NICTA)
5 * Aidan Williams <aidan@nicta.com.au>
7 * Licensed under the GPL-2 or later.
10 #include <linux/device.h>
11 #include <linux/platform_device.h>
12 #include <linux/mtd/mtd.h>
13 #include <linux/mtd/partitions.h>
14 #include <linux/mtd/physmap.h>
15 #include <linux/spi/spi.h>
16 #include <linux/spi/flash.h>
17 #include <linux/irq.h>
18 #include <linux/interrupt.h>
19 #include <linux/usb/musb.h>
20 #include <asm/bfin5xx_spi.h>
24 #include <asm/portmux.h>
25 #include <asm/bfin_sdh.h>
26 #include <mach/bf54x_keys.h>
28 #include <linux/input.h>
29 #include <linux/spi/ad7877.h>
32 * Name the Board for the /proc/cpuinfo
34 const char bfin_board_name[] = "Bluetechnix CM-BF548";
37 * Driver needs to know address, irq and flag pin.
40 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
42 #include <mach/bf54x-lq043.h>
44 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
47 .xres = {480, 480, 480},
48 .yres = {272, 272, 272},
53 static struct resource bf54x_lq043_resources[] = {
55 .start = IRQ_EPPI0_ERR,
57 .flags = IORESOURCE_IRQ,
61 static struct platform_device bf54x_lq043_device = {
62 .name = "bf54x-lq043",
64 .num_resources = ARRAY_SIZE(bf54x_lq043_resources),
65 .resource = bf54x_lq043_resources,
67 .platform_data = &bf54x_lq043_data,
72 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
73 static unsigned int bf548_keymap[] = {
74 KEYVAL(0, 0, KEY_ENTER),
75 KEYVAL(0, 1, KEY_HELP),
77 KEYVAL(0, 3, KEY_BACKSPACE),
78 KEYVAL(1, 0, KEY_TAB),
82 KEYVAL(2, 0, KEY_DOWN),
92 static struct bfin_kpad_platform_data bf54x_kpad_data = {
95 .keymap = bf548_keymap,
96 .keymapsize = ARRAY_SIZE(bf548_keymap),
98 .debounce_time = 5000, /* ns (5ms) */
99 .coldrive_time = 1000, /* ns (1ms) */
100 .keyup_test_interval = 50, /* ms (50ms) */
103 static struct resource bf54x_kpad_resources[] = {
107 .flags = IORESOURCE_IRQ,
111 static struct platform_device bf54x_kpad_device = {
112 .name = "bf54x-keys",
114 .num_resources = ARRAY_SIZE(bf54x_kpad_resources),
115 .resource = bf54x_kpad_resources,
117 .platform_data = &bf54x_kpad_data,
122 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
123 static struct platform_device rtc_device = {
129 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
130 #ifdef CONFIG_SERIAL_BFIN_UART0
131 static struct resource bfin_uart0_resources[] = {
135 .flags = IORESOURCE_MEM,
138 .start = IRQ_UART0_RX,
139 .end = IRQ_UART0_RX+1,
140 .flags = IORESOURCE_IRQ,
143 .start = IRQ_UART0_ERROR,
144 .end = IRQ_UART0_ERROR,
145 .flags = IORESOURCE_IRQ,
148 .start = CH_UART0_TX,
150 .flags = IORESOURCE_DMA,
153 .start = CH_UART0_RX,
155 .flags = IORESOURCE_DMA,
159 unsigned short bfin_uart0_peripherals[] = {
160 P_UART0_TX, P_UART0_RX, 0
163 static struct platform_device bfin_uart0_device = {
166 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
167 .resource = bfin_uart0_resources,
169 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
173 #ifdef CONFIG_SERIAL_BFIN_UART1
174 static struct resource bfin_uart1_resources[] = {
178 .flags = IORESOURCE_MEM,
181 .start = IRQ_UART1_RX,
182 .end = IRQ_UART1_RX+1,
183 .flags = IORESOURCE_IRQ,
186 .start = IRQ_UART1_ERROR,
187 .end = IRQ_UART1_ERROR,
188 .flags = IORESOURCE_IRQ,
191 .start = CH_UART1_TX,
193 .flags = IORESOURCE_DMA,
196 .start = CH_UART1_RX,
198 .flags = IORESOURCE_DMA,
200 #ifdef CONFIG_BFIN_UART1_CTSRTS
201 { /* CTS pin -- 0 means not supported */
204 .flags = IORESOURCE_IO,
206 { /* RTS pin -- 0 means not supported */
209 .flags = IORESOURCE_IO,
214 unsigned short bfin_uart1_peripherals[] = {
215 P_UART1_TX, P_UART1_RX,
216 #ifdef CONFIG_BFIN_UART1_CTSRTS
217 P_UART1_RTS, P_UART1_CTS,
222 static struct platform_device bfin_uart1_device = {
225 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
226 .resource = bfin_uart1_resources,
228 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
232 #ifdef CONFIG_SERIAL_BFIN_UART2
233 static struct resource bfin_uart2_resources[] = {
237 .flags = IORESOURCE_MEM,
240 .start = IRQ_UART2_RX,
241 .end = IRQ_UART2_RX+1,
242 .flags = IORESOURCE_IRQ,
245 .start = IRQ_UART2_ERROR,
246 .end = IRQ_UART2_ERROR,
247 .flags = IORESOURCE_IRQ,
250 .start = CH_UART2_TX,
252 .flags = IORESOURCE_DMA,
255 .start = CH_UART2_RX,
257 .flags = IORESOURCE_DMA,
261 unsigned short bfin_uart2_peripherals[] = {
262 P_UART2_TX, P_UART2_RX, 0
265 static struct platform_device bfin_uart2_device = {
268 .num_resources = ARRAY_SIZE(bfin_uart2_resources),
269 .resource = bfin_uart2_resources,
271 .platform_data = &bfin_uart2_peripherals, /* Passed to driver */
275 #ifdef CONFIG_SERIAL_BFIN_UART3
276 static struct resource bfin_uart3_resources[] = {
280 .flags = IORESOURCE_MEM,
283 .start = IRQ_UART3_RX,
284 .end = IRQ_UART3_RX+1,
285 .flags = IORESOURCE_IRQ,
288 .start = IRQ_UART3_ERROR,
289 .end = IRQ_UART3_ERROR,
290 .flags = IORESOURCE_IRQ,
293 .start = CH_UART3_TX,
295 .flags = IORESOURCE_DMA,
298 .start = CH_UART3_RX,
300 .flags = IORESOURCE_DMA,
302 #ifdef CONFIG_BFIN_UART3_CTSRTS
303 { /* CTS pin -- 0 means not supported */
306 .flags = IORESOURCE_IO,
308 { /* RTS pin -- 0 means not supported */
311 .flags = IORESOURCE_IO,
316 unsigned short bfin_uart3_peripherals[] = {
317 P_UART3_TX, P_UART3_RX,
318 #ifdef CONFIG_BFIN_UART3_CTSRTS
319 P_UART3_RTS, P_UART3_CTS,
324 static struct platform_device bfin_uart3_device = {
327 .num_resources = ARRAY_SIZE(bfin_uart3_resources),
328 .resource = bfin_uart3_resources,
330 .platform_data = &bfin_uart3_peripherals, /* Passed to driver */
336 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
337 #ifdef CONFIG_BFIN_SIR0
338 static struct resource bfin_sir0_resources[] = {
342 .flags = IORESOURCE_MEM,
345 .start = IRQ_UART0_RX,
346 .end = IRQ_UART0_RX+1,
347 .flags = IORESOURCE_IRQ,
350 .start = CH_UART0_RX,
351 .end = CH_UART0_RX+1,
352 .flags = IORESOURCE_DMA,
355 static struct platform_device bfin_sir0_device = {
358 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
359 .resource = bfin_sir0_resources,
362 #ifdef CONFIG_BFIN_SIR1
363 static struct resource bfin_sir1_resources[] = {
367 .flags = IORESOURCE_MEM,
370 .start = IRQ_UART1_RX,
371 .end = IRQ_UART1_RX+1,
372 .flags = IORESOURCE_IRQ,
375 .start = CH_UART1_RX,
376 .end = CH_UART1_RX+1,
377 .flags = IORESOURCE_DMA,
380 static struct platform_device bfin_sir1_device = {
383 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
384 .resource = bfin_sir1_resources,
387 #ifdef CONFIG_BFIN_SIR2
388 static struct resource bfin_sir2_resources[] = {
392 .flags = IORESOURCE_MEM,
395 .start = IRQ_UART2_RX,
396 .end = IRQ_UART2_RX+1,
397 .flags = IORESOURCE_IRQ,
400 .start = CH_UART2_RX,
401 .end = CH_UART2_RX+1,
402 .flags = IORESOURCE_DMA,
405 static struct platform_device bfin_sir2_device = {
408 .num_resources = ARRAY_SIZE(bfin_sir2_resources),
409 .resource = bfin_sir2_resources,
412 #ifdef CONFIG_BFIN_SIR3
413 static struct resource bfin_sir3_resources[] = {
417 .flags = IORESOURCE_MEM,
420 .start = IRQ_UART3_RX,
421 .end = IRQ_UART3_RX+1,
422 .flags = IORESOURCE_IRQ,
425 .start = CH_UART3_RX,
426 .end = CH_UART3_RX+1,
427 .flags = IORESOURCE_DMA,
430 static struct platform_device bfin_sir3_device = {
433 .num_resources = ARRAY_SIZE(bfin_sir3_resources),
434 .resource = bfin_sir3_resources,
439 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
440 #include <linux/smsc911x.h>
442 static struct resource smsc911x_resources[] = {
444 .name = "smsc911x-memory",
446 .end = 0x24000000 + 0xFF,
447 .flags = IORESOURCE_MEM,
452 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
456 static struct smsc911x_platform_config smsc911x_config = {
457 .flags = SMSC911X_USE_16BIT,
458 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
459 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
460 .phy_interface = PHY_INTERFACE_MODE_MII,
463 static struct platform_device smsc911x_device = {
466 .num_resources = ARRAY_SIZE(smsc911x_resources),
467 .resource = smsc911x_resources,
469 .platform_data = &smsc911x_config,
474 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
475 static struct resource musb_resources[] = {
479 .flags = IORESOURCE_MEM,
481 [1] = { /* general IRQ */
482 .start = IRQ_USB_INT0,
484 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
486 [2] = { /* DMA IRQ */
487 .start = IRQ_USB_DMA,
489 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
493 static struct musb_hdrc_config musb_config = {
500 .gpio_vrsel = GPIO_PH6,
503 static struct musb_hdrc_platform_data musb_plat = {
504 #if defined(CONFIG_USB_MUSB_OTG)
506 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
508 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
509 .mode = MUSB_PERIPHERAL,
511 .config = &musb_config,
514 static u64 musb_dmamask = ~(u32)0;
516 static struct platform_device musb_device = {
520 .dma_mask = &musb_dmamask,
521 .coherent_dma_mask = 0xffffffff,
522 .platform_data = &musb_plat,
524 .num_resources = ARRAY_SIZE(musb_resources),
525 .resource = musb_resources,
529 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
530 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
531 static struct resource bfin_sport0_uart_resources[] = {
533 .start = SPORT0_TCR1,
534 .end = SPORT0_MRCS3+4,
535 .flags = IORESOURCE_MEM,
538 .start = IRQ_SPORT0_RX,
539 .end = IRQ_SPORT0_RX+1,
540 .flags = IORESOURCE_IRQ,
543 .start = IRQ_SPORT0_ERROR,
544 .end = IRQ_SPORT0_ERROR,
545 .flags = IORESOURCE_IRQ,
549 unsigned short bfin_sport0_peripherals[] = {
550 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
551 P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
554 static struct platform_device bfin_sport0_uart_device = {
555 .name = "bfin-sport-uart",
557 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
558 .resource = bfin_sport0_uart_resources,
560 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
564 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
565 static struct resource bfin_sport1_uart_resources[] = {
567 .start = SPORT1_TCR1,
568 .end = SPORT1_MRCS3+4,
569 .flags = IORESOURCE_MEM,
572 .start = IRQ_SPORT1_RX,
573 .end = IRQ_SPORT1_RX+1,
574 .flags = IORESOURCE_IRQ,
577 .start = IRQ_SPORT1_ERROR,
578 .end = IRQ_SPORT1_ERROR,
579 .flags = IORESOURCE_IRQ,
583 unsigned short bfin_sport1_peripherals[] = {
584 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
585 P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
588 static struct platform_device bfin_sport1_uart_device = {
589 .name = "bfin-sport-uart",
591 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
592 .resource = bfin_sport1_uart_resources,
594 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
598 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
599 static struct resource bfin_sport2_uart_resources[] = {
601 .start = SPORT2_TCR1,
602 .end = SPORT2_MRCS3+4,
603 .flags = IORESOURCE_MEM,
606 .start = IRQ_SPORT2_RX,
607 .end = IRQ_SPORT2_RX+1,
608 .flags = IORESOURCE_IRQ,
611 .start = IRQ_SPORT2_ERROR,
612 .end = IRQ_SPORT2_ERROR,
613 .flags = IORESOURCE_IRQ,
617 unsigned short bfin_sport2_peripherals[] = {
618 P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
619 P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
622 static struct platform_device bfin_sport2_uart_device = {
623 .name = "bfin-sport-uart",
625 .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
626 .resource = bfin_sport2_uart_resources,
628 .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
632 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
633 static struct resource bfin_sport3_uart_resources[] = {
635 .start = SPORT3_TCR1,
636 .end = SPORT3_MRCS3+4,
637 .flags = IORESOURCE_MEM,
640 .start = IRQ_SPORT3_RX,
641 .end = IRQ_SPORT3_RX+1,
642 .flags = IORESOURCE_IRQ,
645 .start = IRQ_SPORT3_ERROR,
646 .end = IRQ_SPORT3_ERROR,
647 .flags = IORESOURCE_IRQ,
651 unsigned short bfin_sport3_peripherals[] = {
652 P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
653 P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
656 static struct platform_device bfin_sport3_uart_device = {
657 .name = "bfin-sport-uart",
659 .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
660 .resource = bfin_sport3_uart_resources,
662 .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
668 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
669 static struct resource bfin_atapi_resources[] = {
673 .flags = IORESOURCE_MEM,
676 .start = IRQ_ATAPI_ERR,
677 .end = IRQ_ATAPI_ERR,
678 .flags = IORESOURCE_IRQ,
682 static struct platform_device bfin_atapi_device = {
683 .name = "pata-bf54x",
685 .num_resources = ARRAY_SIZE(bfin_atapi_resources),
686 .resource = bfin_atapi_resources,
690 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
691 static struct mtd_partition partition_info[] = {
693 .name = "linux kernel(nand)",
695 .size = 4 * 1024 * 1024,
698 .name = "file system(nand)",
699 .offset = 4 * 1024 * 1024,
700 .size = (256 - 4) * 1024 * 1024,
704 static struct bf5xx_nand_platform bf5xx_nand_platform = {
705 .page_size = NFC_PG_SIZE_256,
706 .data_width = NFC_NWIDTH_8,
707 .partitions = partition_info,
708 .nr_partitions = ARRAY_SIZE(partition_info),
713 static struct resource bf5xx_nand_resources[] = {
717 .flags = IORESOURCE_MEM,
722 .flags = IORESOURCE_IRQ,
726 static struct platform_device bf5xx_nand_device = {
727 .name = "bf5xx-nand",
729 .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
730 .resource = bf5xx_nand_resources,
732 .platform_data = &bf5xx_nand_platform,
737 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
738 static struct bfin_sd_host bfin_sdh_data = {
740 .irq_int0 = IRQ_SDH_MASK0,
741 .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
744 static struct platform_device bf54x_sdh_device = {
748 .platform_data = &bfin_sdh_data,
753 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
754 static struct mtd_partition para_partitions[] = {
756 .name = "bootloader(nor)",
760 .name = "linux kernel(nor)",
762 .offset = MTDPART_OFS_APPEND,
764 .name = "file system(nor)",
765 .size = MTDPART_SIZ_FULL,
766 .offset = MTDPART_OFS_APPEND,
770 static struct physmap_flash_data para_flash_data = {
772 .parts = para_partitions,
773 .nr_parts = ARRAY_SIZE(para_partitions),
776 static struct resource para_flash_resource = {
779 .flags = IORESOURCE_MEM,
782 static struct platform_device para_flash_device = {
783 .name = "physmap-flash",
786 .platform_data = ¶_flash_data,
789 .resource = ¶_flash_resource,
793 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
794 /* all SPI peripherals info goes here */
795 #if defined(CONFIG_MTD_M25P80) \
796 || defined(CONFIG_MTD_M25P80_MODULE)
797 /* SPI flash chip (m25p16) */
798 static struct mtd_partition bfin_spi_flash_partitions[] = {
800 .name = "bootloader(spi)",
803 .mask_flags = MTD_CAP_ROM
805 .name = "linux kernel(spi)",
811 static struct flash_platform_data bfin_spi_flash_data = {
813 .parts = bfin_spi_flash_partitions,
814 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
818 static struct bfin5xx_spi_chip spi_flash_chip_info = {
819 .enable_dma = 0, /* use dma transfer with this chip*/
824 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
825 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
830 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
832 .vref_delay_usecs = 50, /* internal, no capacitor */
835 .pressure_max = 1000,
837 .stopacq_polarity = 1,
838 .first_conversion_delay = 3,
839 .acquisition_time = 1,
841 .pen_down_acc_interval = 1,
845 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
846 static struct bfin5xx_spi_chip spidev_chip_info = {
852 static struct spi_board_info bf54x_spi_board_info[] __initdata = {
853 #if defined(CONFIG_MTD_M25P80) \
854 || defined(CONFIG_MTD_M25P80_MODULE)
856 /* the modalias must be the same as spi device driver name */
857 .modalias = "m25p80", /* Name of spi_driver for this device */
858 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
859 .bus_num = 0, /* Framework bus number */
860 .chip_select = 1, /* SPI_SSEL1*/
861 .platform_data = &bfin_spi_flash_data,
862 .controller_data = &spi_flash_chip_info,
866 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
868 .modalias = "ad7877",
869 .platform_data = &bfin_ad7877_ts_info,
871 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
874 .controller_data = &spi_ad7877_chip_info,
877 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
879 .modalias = "spidev",
880 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
883 .controller_data = &spidev_chip_info,
889 static struct resource bfin_spi0_resource[] = {
891 .start = SPI0_REGBASE,
892 .end = SPI0_REGBASE + 0xFF,
893 .flags = IORESOURCE_MEM,
898 .flags = IORESOURCE_DMA,
903 .flags = IORESOURCE_IRQ,
908 static struct resource bfin_spi1_resource[] = {
910 .start = SPI1_REGBASE,
911 .end = SPI1_REGBASE + 0xFF,
912 .flags = IORESOURCE_MEM,
917 .flags = IORESOURCE_DMA,
922 .flags = IORESOURCE_IRQ,
926 /* SPI controller data */
927 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
929 .enable_dma = 1, /* master has the ability to do dma transfer */
930 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
933 static struct platform_device bf54x_spi_master0 = {
935 .id = 0, /* Bus number */
936 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
937 .resource = bfin_spi0_resource,
939 .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
943 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
945 .enable_dma = 1, /* master has the ability to do dma transfer */
946 .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
949 static struct platform_device bf54x_spi_master1 = {
951 .id = 1, /* Bus number */
952 .num_resources = ARRAY_SIZE(bfin_spi1_resource),
953 .resource = bfin_spi1_resource,
955 .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
958 #endif /* spi master and devices */
960 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
961 static struct resource bfin_twi0_resource[] = {
963 .start = TWI0_REGBASE,
964 .end = TWI0_REGBASE + 0xFF,
965 .flags = IORESOURCE_MEM,
970 .flags = IORESOURCE_IRQ,
974 static struct platform_device i2c_bfin_twi0_device = {
975 .name = "i2c-bfin-twi",
977 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
978 .resource = bfin_twi0_resource,
981 #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
982 static struct resource bfin_twi1_resource[] = {
984 .start = TWI1_REGBASE,
985 .end = TWI1_REGBASE + 0xFF,
986 .flags = IORESOURCE_MEM,
991 .flags = IORESOURCE_IRQ,
995 static struct platform_device i2c_bfin_twi1_device = {
996 .name = "i2c-bfin-twi",
998 .num_resources = ARRAY_SIZE(bfin_twi1_resource),
999 .resource = bfin_twi1_resource,
1004 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1005 #include <linux/gpio_keys.h>
1007 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1008 {BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"},
1011 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1012 .buttons = bfin_gpio_keys_table,
1013 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
1016 static struct platform_device bfin_device_gpiokeys = {
1017 .name = "gpio-keys",
1019 .platform_data = &bfin_gpio_keys_data,
1024 static const unsigned int cclk_vlev_datasheet[] =
1027 * Internal VLEV BF54XSBBC1533
1028 ****temporarily using these values until data sheet is updated
1030 VRPAIR(VLEV_085, 150000000),
1031 VRPAIR(VLEV_090, 250000000),
1032 VRPAIR(VLEV_110, 276000000),
1033 VRPAIR(VLEV_115, 301000000),
1034 VRPAIR(VLEV_120, 525000000),
1035 VRPAIR(VLEV_125, 550000000),
1036 VRPAIR(VLEV_130, 600000000),
1039 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1040 .tuple_tab = cclk_vlev_datasheet,
1041 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1042 .vr_settling_time = 25 /* us */,
1045 static struct platform_device bfin_dpmc = {
1046 .name = "bfin dpmc",
1048 .platform_data = &bfin_dmpc_vreg_data,
1052 static struct platform_device *cm_bf548_devices[] __initdata = {
1056 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1060 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1061 #ifdef CONFIG_SERIAL_BFIN_UART0
1064 #ifdef CONFIG_SERIAL_BFIN_UART1
1067 #ifdef CONFIG_SERIAL_BFIN_UART2
1070 #ifdef CONFIG_SERIAL_BFIN_UART3
1075 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1076 #ifdef CONFIG_BFIN_SIR0
1079 #ifdef CONFIG_BFIN_SIR1
1082 #ifdef CONFIG_BFIN_SIR2
1085 #ifdef CONFIG_BFIN_SIR3
1090 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
1091 &bf54x_lq043_device,
1094 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
1098 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1102 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1103 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1104 &bfin_sport0_uart_device,
1106 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1107 &bfin_sport1_uart_device,
1109 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1110 &bfin_sport2_uart_device,
1112 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1113 &bfin_sport3_uart_device,
1117 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
1121 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1125 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
1129 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1134 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
1138 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1139 &i2c_bfin_twi0_device,
1140 #if !defined(CONFIG_BF542)
1141 &i2c_bfin_twi1_device,
1145 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1146 &bfin_device_gpiokeys,
1149 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1154 static int __init cm_bf548_init(void)
1156 printk(KERN_INFO "%s(): registering device resources\n", __func__);
1157 platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
1159 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1160 spi_register_board_info(bf54x_spi_board_info,
1161 ARRAY_SIZE(bf54x_spi_board_info));
1167 arch_initcall(cm_bf548_init);
1169 static struct platform_device *cm_bf548_early_devices[] __initdata = {
1170 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1171 #ifdef CONFIG_SERIAL_BFIN_UART0
1174 #ifdef CONFIG_SERIAL_BFIN_UART1
1177 #ifdef CONFIG_SERIAL_BFIN_UART2
1180 #ifdef CONFIG_SERIAL_BFIN_UART3
1185 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1186 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1187 &bfin_sport0_uart_device,
1189 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1190 &bfin_sport1_uart_device,
1192 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1193 &bfin_sport2_uart_device,
1195 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1196 &bfin_sport3_uart_device,
1201 void __init native_machine_early_platform_add_devices(void)
1203 printk(KERN_INFO "register early platform devices\n");
1204 early_platform_add_devices(cm_bf548_early_devices,
1205 ARRAY_SIZE(cm_bf548_early_devices));