2 * Low-level CPU initialisation
3 * Based on arch/arm/kernel/head.S
5 * Copyright (C) 1994-2002 Russell King
6 * Copyright (C) 2003-2012 ARM Ltd.
7 * Authors: Catalin Marinas <catalin.marinas@arm.com>
8 * Will Deacon <will.deacon@arm.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program. If not, see <http://www.gnu.org/licenses/>.
23 #include <linux/linkage.h>
24 #include <linux/init.h>
26 #include <asm/assembler.h>
27 #include <asm/ptrace.h>
28 #include <asm/asm-offsets.h>
29 #include <asm/cputype.h>
30 #include <asm/memory.h>
31 #include <asm/thread_info.h>
32 #include <asm/pgtable-hwdef.h>
33 #include <asm/pgtable.h>
38 * swapper_pg_dir is the virtual address of the initial page table. We place
39 * the page tables 3 * PAGE_SIZE below KERNEL_RAM_VADDR. The idmap_pg_dir has
40 * 2 pages and is placed below swapper_pg_dir.
42 #define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
44 #if (KERNEL_RAM_VADDR & 0xfffff) != 0x80000
45 #error KERNEL_RAM_VADDR must start at 0xXXX80000
48 #define SWAPPER_DIR_SIZE (3 * PAGE_SIZE)
49 #define IDMAP_DIR_SIZE (2 * PAGE_SIZE)
52 .equ swapper_pg_dir, KERNEL_RAM_VADDR - SWAPPER_DIR_SIZE
55 .equ idmap_pg_dir, swapper_pg_dir - IDMAP_DIR_SIZE
57 .macro pgtbl, ttb0, ttb1, phys
58 add \ttb1, \phys, #TEXT_OFFSET - SWAPPER_DIR_SIZE
59 sub \ttb0, \ttb1, #IDMAP_DIR_SIZE
62 #ifdef CONFIG_ARM64_64K_PAGES
63 #define BLOCK_SHIFT PAGE_SHIFT
64 #define BLOCK_SIZE PAGE_SIZE
66 #define BLOCK_SHIFT SECTION_SHIFT
67 #define BLOCK_SIZE SECTION_SIZE
70 #define KERNEL_START KERNEL_RAM_VADDR
71 #define KERNEL_END _end
74 * Initial memory map attributes.
77 #define PTE_FLAGS PTE_TYPE_PAGE | PTE_AF
78 #define PMD_FLAGS PMD_TYPE_SECT | PMD_SECT_AF
80 #define PTE_FLAGS PTE_TYPE_PAGE | PTE_AF | PTE_SHARED
81 #define PMD_FLAGS PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S
84 #ifdef CONFIG_ARM64_64K_PAGES
85 #define MM_MMUFLAGS PTE_ATTRINDX(MT_NORMAL) | PTE_FLAGS
87 #define MM_MMUFLAGS PMD_ATTRINDX(MT_NORMAL) | PMD_FLAGS
91 * Kernel startup entry point.
92 * ---------------------------
94 * The requirements are:
95 * MMU = off, D-cache = off, I-cache = on or off,
96 * x0 = physical address to the FDT blob.
98 * This code is mostly position independent so you call this at
99 * __pa(PAGE_OFFSET + TEXT_OFFSET).
101 * Note that the callee-saved registers are used for storing variables
102 * that are useful before the MMU is enabled. The allocations are described
103 * in the entry routines.
108 * DO NOT MODIFY. Image header expected by Linux boot-loaders.
110 b stext // branch to kernel start, magic
112 .quad TEXT_OFFSET // Image load offset from start of RAM
117 mov x21, x0 // x21=FDT
118 bl el2_setup // Drop to EL1, w20=cpu_boot_mode
119 bl __calc_phys_offset // x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
120 bl set_cpu_boot_mode_flag
121 mrs x22, midr_el1 // x22=cpuid
123 bl lookup_processor_type
124 mov x23, x0 // x23=current cpu_table
125 cbz x23, __error_p // invalid processor (x23=0)?
127 bl __create_page_tables // x25=TTBR0, x26=TTBR1
129 * The following calls CPU specific code in a position independent
130 * manner. See arch/arm64/mm/proc.S for details. x23 = base of
131 * cpu_info structure selected by lookup_processor_type above.
132 * On return, the CPU will be ready for the MMU to be turned on and
133 * the TCR will have been set.
135 ldr x27, __switch_data // address to jump to after
136 // MMU has been enabled
137 adr lr, __enable_mmu // return (PIC) address
138 ldr x12, [x23, #CPU_INFO_SETUP]
139 add x12, x12, x28 // __virt_to_phys
140 br x12 // initialise processor
144 * If we're fortunate enough to boot at EL2, ensure that the world is
145 * sane before dropping to EL1.
147 * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x20 if
148 * booted in EL1 or EL2 respectively.
152 cmp x0, #PSR_MODE_EL2t
153 ccmp x0, #PSR_MODE_EL2h, #0x4, ne
156 CPU_BE( orr x0, x0, #(1 << 25) ) // Set the EE bit for EL2
157 CPU_LE( bic x0, x0, #(1 << 25) ) // Clear the EE bit for EL2
161 CPU_BE( orr x0, x0, #(3 << 24) ) // Set the EE and E0E bits for EL1
162 CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1
164 mov w20, #BOOT_CPU_MODE_EL1 // This cpu booted in EL1
168 /* Hyp configuration. */
169 2: mov x0, #(1 << 31) // 64-bit EL1
172 /* Generic timers. */
174 orr x0, x0, #3 // Enable EL1 physical timers
176 msr cntvoff_el2, xzr // Clear virtual offset
178 /* Populate ID registers. */
185 mov x0, #0x0800 // Set/clear RES{1,0} bits
186 CPU_BE( movk x0, #0x33d0, lsl #16 ) // Set EE and E0E on BE systems
187 CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems
190 /* Coprocessor traps. */
192 msr cptr_el2, x0 // Disable copro. traps to EL2
195 msr hstr_el2, xzr // Disable CP15 traps to EL2
198 /* Stage-2 translation */
201 /* Hypervisor stub */
202 adr x0, __hyp_stub_vectors
206 mov x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
210 mov w20, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2
215 * Sets the __boot_cpu_mode flag depending on the CPU boot mode passed
216 * in x20. See arch/arm64/include/asm/virt.h for more info.
218 ENTRY(set_cpu_boot_mode_flag)
219 ldr x1, =__boot_cpu_mode // Compute __boot_cpu_mode
221 cmp w20, #BOOT_CPU_MODE_EL2
224 1: str w20, [x1] // This CPU has booted in EL1
226 ENDPROC(set_cpu_boot_mode_flag)
229 * We need to find out the CPU boot mode long after boot, so we need to
230 * store it in a writable variable.
232 * This is not in .bss, because we set it sufficiently early that the boot-time
233 * zeroing of .bss would clobber it.
236 ENTRY(__boot_cpu_mode)
237 .long BOOT_CPU_MODE_EL2
248 .quad secondary_holding_pen_release
251 * This provides a "holding pen" for platforms to hold all secondary
252 * cores are held until we're ready for them to initialise.
254 ENTRY(secondary_holding_pen)
255 bl el2_setup // Drop to EL1, w20=cpu_boot_mode
256 bl __calc_phys_offset // x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
257 bl set_cpu_boot_mode_flag
259 ldr x1, =MPIDR_HWID_BITMASK
267 b.eq secondary_startup
270 ENDPROC(secondary_holding_pen)
273 * Secondary entry point that jumps straight into the kernel. Only to
274 * be used where CPUs are brought online dynamically by the kernel.
276 ENTRY(secondary_entry)
277 bl __calc_phys_offset // x2=phys offset
278 bl el2_setup // Drop to EL1
280 ENDPROC(secondary_entry)
282 ENTRY(secondary_startup)
284 * Common entry point for secondary CPUs.
286 mrs x22, midr_el1 // x22=cpuid
288 bl lookup_processor_type
289 mov x23, x0 // x23=current cpu_table
290 cbz x23, __error_p // invalid processor (x23=0)?
292 pgtbl x25, x26, x24 // x25=TTBR0, x26=TTBR1
293 ldr x12, [x23, #CPU_INFO_SETUP]
294 add x12, x12, x28 // __virt_to_phys
295 blr x12 // initialise processor
297 ldr x21, =secondary_data
298 ldr x27, =__secondary_switched // address to jump to after enabling the MMU
300 ENDPROC(secondary_startup)
302 ENTRY(__secondary_switched)
303 ldr x0, [x21] // get secondary_data.stack
306 b secondary_start_kernel
307 ENDPROC(__secondary_switched)
308 #endif /* CONFIG_SMP */
311 * Setup common bits before finally enabling the MMU. Essentially this is just
312 * loading the page table pointer and vector base registers.
314 * On entry to this code, x0 must contain the SCTLR_EL1 value for turning on
320 msr ttbr0_el1, x25 // load TTBR0
321 msr ttbr1_el1, x26 // load TTBR1
324 ENDPROC(__enable_mmu)
327 * Enable the MMU. This completely changes the structure of the visible memory
328 * space. You will not be able to trace execution through this.
330 * x0 = system control register
331 * x27 = *virtual* address to jump to upon completion
333 * other registers depend on the function called upon completion
340 ENDPROC(__turn_mmu_on)
343 * Calculate the start of physical memory.
348 sub x28, x0, x1 // x28 = PHYS_OFFSET - PAGE_OFFSET
349 add x24, x2, x28 // x24 = PHYS_OFFSET
351 ENDPROC(__calc_phys_offset)
358 * Macro to populate the PGD for the corresponding block entry in the next
359 * level (tbl) for the given virtual address.
361 * Preserves: pgd, tbl, virt
362 * Corrupts: tmp1, tmp2
364 .macro create_pgd_entry, pgd, tbl, virt, tmp1, tmp2
365 lsr \tmp1, \virt, #PGDIR_SHIFT
366 and \tmp1, \tmp1, #PTRS_PER_PGD - 1 // PGD index
367 orr \tmp2, \tbl, #3 // PGD entry table type
368 str \tmp2, [\pgd, \tmp1, lsl #3]
372 * Macro to populate block entries in the page table for the start..end
373 * virtual range (inclusive).
375 * Preserves: tbl, flags
376 * Corrupts: phys, start, end, pstate
378 .macro create_block_map, tbl, flags, phys, start, end, idmap=0
379 lsr \phys, \phys, #BLOCK_SHIFT
381 and \start, \phys, #PTRS_PER_PTE - 1 // table index
383 lsr \start, \start, #BLOCK_SHIFT
384 and \start, \start, #PTRS_PER_PTE - 1 // table index
386 orr \phys, \flags, \phys, lsl #BLOCK_SHIFT // table entry
388 lsr \end, \end, #BLOCK_SHIFT
389 and \end, \end, #PTRS_PER_PTE - 1 // table end index
391 9999: str \phys, [\tbl, \start, lsl #3] // store the entry
393 add \start, \start, #1 // next entry
394 add \phys, \phys, #BLOCK_SIZE // next block
401 * Setup the initial page tables. We only setup the barest amount which is
402 * required to get the kernel running. The following sections are required:
403 * - identity mapping to enable the MMU (low address, TTBR0)
404 * - first few MB of the kernel linear mapping to jump to once the MMU has
405 * been enabled, including the FDT blob (TTBR1)
406 * - UART mapping if CONFIG_EARLY_PRINTK is enabled (TTBR1)
408 __create_page_tables:
409 pgtbl x25, x26, x24 // idmap_pg_dir and swapper_pg_dir addresses
412 * Clear the idmap and swapper page tables.
415 add x6, x26, #SWAPPER_DIR_SIZE
416 1: stp xzr, xzr, [x0], #16
417 stp xzr, xzr, [x0], #16
418 stp xzr, xzr, [x0], #16
419 stp xzr, xzr, [x0], #16
426 * Create the identity mapping.
428 add x0, x25, #PAGE_SIZE // section table address
429 adr x3, __turn_mmu_on // virtual/physical address
430 create_pgd_entry x25, x0, x3, x5, x6
431 create_block_map x0, x7, x3, x5, x5, idmap=1
434 * Map the kernel image (starting with PHYS_OFFSET).
436 add x0, x26, #PAGE_SIZE // section table address
438 create_pgd_entry x26, x0, x5, x3, x6
439 ldr x6, =KERNEL_END - 1
440 mov x3, x24 // phys offset
441 create_block_map x0, x7, x3, x5, x6
444 * Map the FDT blob (maximum 2MB; must be within 512MB of
447 mov x3, x21 // FDT phys address
448 and x3, x3, #~((1 << 21) - 1) // 2MB aligned
450 sub x5, x3, x24 // subtract PHYS_OFFSET
451 tst x5, #~((1 << 29) - 1) // within 512MB?
452 csel x21, xzr, x21, ne // zero the FDT pointer
454 add x5, x5, x6 // __va(FDT blob)
455 add x6, x5, #1 << 21 // 2MB for the FDT blob
456 sub x6, x6, #1 // inclusive range
457 create_block_map x0, x7, x3, x5, x6
459 #ifdef CONFIG_EARLY_PRINTK
461 * Create the pgd entry for the UART mapping. The full mapping is done
462 * later based earlyprintk kernel parameter.
464 ldr x5, =EARLYCON_IOBASE // UART virtual address
465 add x0, x26, #2 * PAGE_SIZE // section table address
466 create_pgd_entry x26, x0, x5, x6, x7
469 ENDPROC(__create_page_tables)
473 .type __switch_data, %object
475 .quad __mmap_switched
476 .quad __data_loc // x4
478 .quad __bss_start // x6
480 .quad processor_id // x4
481 .quad __fdt_pointer // x5
482 .quad memstart_addr // x6
483 .quad init_thread_union + THREAD_START_SP // sp
486 * The following fragment of code is executed with the MMU on in MMU mode, and
487 * uses absolute addresses; this is not position independent.
490 adr x3, __switch_data + 8
492 ldp x4, x5, [x3], #16
493 ldp x6, x7, [x3], #16
494 cmp x4, x5 // Copy data segment if needed
495 1: ccmp x5, x6, #4, ne
503 str xzr, [x6], #8 // Clear BSS
506 ldp x4, x5, [x3], #16
510 str x22, [x4] // Save processor ID
511 str x21, [x5] // Save FDT pointer
512 str x24, [x6] // Save PHYS_OFFSET
515 ENDPROC(__mmap_switched)
518 * Exception handling. Something went wrong and we can't proceed. We ought to
519 * tell the user, but since we don't have any guarantee that we're even
520 * running on the right architecture, we do virtually nothing.
531 * This function gets the processor ID in w0 and searches the cpu_table[] for
532 * a match. It returns a pointer to the struct cpu_info it found. The
533 * cpu_table[] must end with an empty (all zeros) structure.
535 * This routine can be called via C code and it needs to work with the MMU
536 * both disabled and enabled (the offset is calculated automatically).
538 ENTRY(lookup_processor_type)
539 adr x1, __lookup_processor_type_data
541 sub x1, x1, x2 // get offset between VA and PA
542 add x3, x3, x1 // convert VA to PA
544 ldp w5, w6, [x3] // load cpu_id_val and cpu_id_mask
545 cbz w5, 2f // end of list?
549 add x3, x3, #CPU_INFO_SZ
552 mov x3, #0 // unknown processor
556 ENDPROC(lookup_processor_type)
559 .type __lookup_processor_type_data, %object
560 __lookup_processor_type_data:
563 .size __lookup_processor_type_data, . - __lookup_processor_type_data
566 * Determine validity of the x21 FDT pointer.
567 * The dtb must be 8-byte aligned and live in the first 512M of memory.