3 menu "TI OMAP Common Features"
9 prompt "OMAP System Type"
10 default ARCH_OMAP2PLUS
16 select GENERIC_IRQ_CHIP
18 select NEED_MACH_MEMORY_H
20 "Systems based on omap7xx, omap15xx or omap16xx"
25 select GENERIC_IRQ_CHIP
28 "Systems based on OMAP2, OMAP3 or OMAP4"
32 comment "OMAP Feature Selections"
34 config OMAP_DEBUG_DEVICES
37 For debug cards on TI reference boards.
39 config OMAP_DEBUG_LEDS
41 depends on OMAP_DEBUG_DEVICES
42 default y if LEDS_CLASS
44 config OMAP_SMARTREFLEX
45 bool "SmartReflex support"
46 depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
48 Say Y if you want to enable SmartReflex.
50 SmartReflex can perform continuous dynamic voltage
51 scaling around the nominal operating point voltage
52 according to silicon characteristics and operating
53 conditions. Enabling SmartReflex reduces power
56 Please note, that by default SmartReflex is only
57 initialized. To enable the automatic voltage
58 compensation for vdd mpu and vdd core from user space,
60 /debug/voltage/vdd_<X>/smartreflex/autocomp,
61 where X is mpu or core for OMAP3.
62 Optionally autocompensation can be enabled in the kernel
63 by default during system init via the enable_on_init flag
64 which an be passed as platform data to the smartreflex driver.
66 config OMAP_SMARTREFLEX_CLASS3
67 bool "Class 3 mode of Smartreflex Implementation"
68 depends on OMAP_SMARTREFLEX && TWL4030_CORE
70 Say Y to enable Class 3 implementation of Smartreflex
72 Class 3 implementation of Smartreflex employs continuous hardware
75 config OMAP_RESET_CLOCKS
76 bool "Reset unused clocks during boot"
79 Say Y if you want to reset unused clocks during boot.
80 This option saves power, but assumes all drivers are
81 using the clock framework. Broken drivers that do not
82 yet use clock framework may not work with this option.
83 If you are booting from another operating system, you
84 probably do not want this option enabled until your
85 device drivers work properly.
88 bool "OMAP multiplexing support"
92 Pin multiplexing support for OMAP boards. If your bootloader
93 sets the multiplexing correctly, say N. Otherwise, or if unsure,
97 bool "Multiplexing debug output"
100 Makes the multiplexing functions print out a lot of debug info.
101 This is useful if you want to find out the correct values of the
102 multiplexing registers.
104 config OMAP_MUX_WARNINGS
105 bool "Warn about pins the bootloader didn't set up"
109 Choose Y here to warn whenever driver initialization logic needs
110 to change the pin multiplexing setup. When there are no warnings
111 printed, it's safe to deselect OMAP_MUX for your product.
118 Say Y here if you want support for the OMAP Multichannel
119 Buffered Serial Port.
122 tristate "Mailbox framework support"
125 Say Y here if you want to use OMAP Mailbox framework support for
126 DSP, IVA1.0 and IVA2 in OMAP1/2/3.
128 config OMAP_MBOX_KFIFO_SIZE
129 int "Mailbox kfifo default buffer size (bytes)"
130 depends on OMAP_MBOX_FWK
133 Specify the default size of mailbox's kfifo buffers (bytes).
134 This can also be changed at runtime (via the mbox_kfifo_size
140 config OMAP_IOMMU_DEBUG
141 tristate "Export OMAP IOMMU internals in DebugFS"
142 depends on OMAP_IOMMU && DEBUG_FS
144 Select this to see extensive information about
145 the internal state of OMAP IOMMU in debugfs.
147 Say N unless you know you need this.
149 config OMAP_IOMMU_IVA2
152 config OMAP_MPU_TIMER
154 depends on ARCH_OMAP1
156 Select this option if you want to use the OMAP mpu timer. This
157 timer provides more intra-tick resolution than the 32KHz timer,
158 but consumes more power.
160 config OMAP_32K_TIMER
161 bool "Use 32KHz timer"
162 depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
163 default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
165 Select this option if you want to enable the OMAP 32KHz timer.
166 This timer saves power compared to the OMAP_MPU_TIMER, and has
167 support for no tick during idle. The 32KHz timer provides less
168 intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
169 currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
171 config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
172 bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
173 depends on ARCH_OMAP3 && PM
176 Without this option, L2 Auxiliary control register contents are
177 lost during off-mode entry on HS/EMU devices. This feature
178 requires support from PPA / boot-loader in HS/EMU devices, which
179 currently does not exist by default.
181 config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
182 int "Service ID for the support routine to set L2 AUX control"
183 depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
186 PPA routine service ID for setting L2 auxiliary control register.
188 config OMAP_32K_TIMER_HZ
189 int "Kernel internal timer frequency for 32KHz timer"
191 depends on OMAP_32K_TIMER
194 Kernel internal timer frequency should be a divisor of 32768,
198 bool "Use dual-mode timer"
199 depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
201 Select this option if you want to use OMAP Dual-Mode timers.
203 config OMAP_SERIAL_WAKE
204 bool "Enable wake-up events for serial ports"
205 depends on ARCH_OMAP1 && OMAP_MUX
208 Select this option if you want to have your system wake up
209 to data on the serial RX line. This allows you to wake the
210 system from serial console.
213 prompt "OMAP PM layer selection"
218 bool "No-op/debug PM layer"