Input: ads7846 - SPI_CPHA mode bugfix
[firefly-linux-kernel-4.4.55.git] / arch / arm / mach-s3c2443 / clock.c
1 /* linux/arch/arm/mach-s3c2443/clock.c
2  *
3  * Copyright (c) 2007 Simtec Electronics
4  *      Ben Dooks <ben@simtec.co.uk>
5  *
6  * S3C2443 Clock control support
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
21 */
22
23 #include <linux/init.h>
24 #include <linux/module.h>
25 #include <linux/kernel.h>
26 #include <linux/list.h>
27 #include <linux/errno.h>
28 #include <linux/err.h>
29 #include <linux/sysdev.h>
30 #include <linux/clk.h>
31 #include <linux/mutex.h>
32 #include <linux/delay.h>
33 #include <linux/serial_core.h>
34
35 #include <asm/mach/map.h>
36
37 #include <asm/hardware.h>
38 #include <asm/io.h>
39
40 #include <asm/arch/regs-s3c2443-clock.h>
41
42 #include <asm/plat-s3c24xx/s3c2443.h>
43 #include <asm/plat-s3c24xx/clock.h>
44 #include <asm/plat-s3c24xx/cpu.h>
45
46 /* We currently have to assume that the system is running
47  * from the XTPll input, and that all ***REFCLKs are being
48  * fed from it, as we cannot read the state of OM[4] from
49  * software.
50  *
51  * It would be possible for each board initialisation to
52  * set the correct muxing at initialisation
53 */
54
55 static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
56 {
57         unsigned int clocks = clk->ctrlbit;
58         unsigned long clkcon;
59
60         clkcon = __raw_readl(S3C2443_HCLKCON);
61
62         if (enable)
63                 clkcon |= clocks;
64         else
65                 clkcon &= ~clocks;
66
67         __raw_writel(clkcon, S3C2443_HCLKCON);
68
69         return 0;
70 }
71
72 static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
73 {
74         unsigned int clocks = clk->ctrlbit;
75         unsigned long clkcon;
76
77         clkcon = __raw_readl(S3C2443_PCLKCON);
78
79         if (enable)
80                 clkcon |= clocks;
81         else
82                 clkcon &= ~clocks;
83
84         __raw_writel(clkcon, S3C2443_HCLKCON);
85
86         return 0;
87 }
88
89 static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
90 {
91         unsigned int clocks = clk->ctrlbit;
92         unsigned long clkcon;
93
94         clkcon = __raw_readl(S3C2443_SCLKCON);
95
96         if (enable)
97                 clkcon |= clocks;
98         else
99                 clkcon &= ~clocks;
100
101         __raw_writel(clkcon, S3C2443_SCLKCON);
102
103         return 0;
104 }
105
106 static unsigned long s3c2443_roundrate_clksrc(struct clk *clk,
107                                               unsigned long rate,
108                                               unsigned int max)
109 {
110         unsigned long parent_rate = clk_get_rate(clk->parent);
111         int div;
112
113         if (rate > parent_rate)
114                 return parent_rate;
115
116         /* note, we remove the +/- 1 calculations as they cancel out */
117
118         div = (rate / parent_rate);
119
120         if (div < 1)
121                 div = 1;
122         else if (div > max)
123                 div = max;
124
125         return parent_rate / div;
126 }
127
128 static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk,
129                                                unsigned long rate)
130 {
131         return s3c2443_roundrate_clksrc(clk, rate, 4);
132 }
133
134 static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk,
135                                                 unsigned long rate)
136 {
137         return s3c2443_roundrate_clksrc(clk, rate, 16);
138 }
139
140 static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
141                                                  unsigned long rate)
142 {
143         return s3c2443_roundrate_clksrc(clk, rate, 256);
144 }
145
146 /* clock selections */
147
148 /* CPU EXTCLK input */
149 static struct clk clk_ext = {
150         .name           = "ext",
151         .id             = -1,
152 };
153
154 static struct clk clk_mpllref = {
155         .name           = "mpllref",
156         .parent         = &clk_xtal,
157         .id             = -1,
158 };
159
160 #if 0
161 static struct clk clk_mpll = {
162         .name           = "mpll",
163         .parent         = &clk_mpllref,
164         .id             = -1,
165 };
166 #endif
167
168 static struct clk clk_epllref;
169
170 static struct clk clk_epll = {
171         .name           = "epll",
172         .parent         = &clk_epllref,
173         .id             = -1,
174 };
175
176 static struct clk clk_i2s_ext = {
177         .name           = "i2s-ext",
178         .id             = -1,
179 };
180
181 static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
182 {
183         unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
184
185         clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK;
186
187         if (parent == &clk_xtal)
188                 clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL;
189         else if (parent == &clk_ext)
190                 clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK;
191         else if (parent != &clk_mpllref)
192                 return -EINVAL;
193
194         __raw_writel(clksrc, S3C2443_CLKSRC);
195         clk->parent = parent;
196
197         return 0;
198 }
199
200 static struct clk clk_epllref = {
201         .name           = "epllref",
202         .id             = -1,
203         .set_parent     = s3c2443_setparent_epllref,
204 };
205
206 static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
207 {
208         unsigned long parent_rate = clk_get_rate(clk->parent);
209         unsigned long div = __raw_readl(S3C2443_CLKDIV0);
210
211         div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
212         div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);       /* x2 */
213
214         return parent_rate / (div + 1);
215 }
216
217 static struct clk clk_mdivclk = {
218         .name           = "mdivclk",
219         .parent         = &clk_mpllref,
220         .id             = -1,
221         .get_rate       = s3c2443_getrate_mdivclk,
222 };
223
224
225 static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
226 {
227         unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
228
229         clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL |
230                     S3C2443_CLKSRC_EXTCLK_DIV);
231
232         if (parent == &clk_mpll)
233                 clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL;
234         else if (parent == &clk_mdivclk)
235                 clksrc |= S3C2443_CLKSRC_EXTCLK_DIV;
236         else if (parent != &clk_mpllref)
237                 return -EINVAL;
238
239         __raw_writel(clksrc, S3C2443_CLKSRC);
240         clk->parent = parent;
241
242         return 0;
243 }
244
245 static struct clk clk_msysclk = {
246         .name           = "msysclk",
247         .parent         = &clk_xtal,
248         .id             = -1,
249         .set_parent     = s3c2443_setparent_msysclk,
250 };
251
252
253 /* esysclk
254  *
255  * this is sourced from either the EPLL or the EPLLref clock
256 */
257
258 static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent)
259 {
260         unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
261
262         if (parent == &clk_epll)
263                 clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL;
264         else if (parent == &clk_epllref)
265                 clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL;
266         else
267                 return -EINVAL;
268
269         __raw_writel(clksrc, S3C2443_CLKSRC);
270         clk->parent = parent;
271
272         return 0;
273 }
274
275 static struct clk clk_esysclk = {
276         .name           = "esysclk",
277         .parent         = &clk_epll,
278         .id             = -1,
279         .set_parent     = s3c2443_setparent_esysclk,
280 };
281
282 /* uartclk
283  *
284  * UART baud-rate clock sourced from esysclk via a divisor
285 */
286
287 static unsigned long s3c2443_getrate_uart(struct clk *clk)
288 {
289         unsigned long parent_rate = clk_get_rate(clk->parent);
290         unsigned long div = __raw_readl(S3C2443_CLKDIV1);
291
292         div &= S3C2443_CLKDIV1_UARTDIV_MASK;
293         div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT;
294
295         return parent_rate / (div + 1);
296 }
297
298
299 static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate)
300 {
301         unsigned long parent_rate = clk_get_rate(clk->parent);
302         unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
303
304         rate = s3c2443_roundrate_clksrc16(clk, rate);
305         rate = parent_rate / rate;
306
307         clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
308         clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
309
310         __raw_writel(clkdivn, S3C2443_CLKDIV1);
311         return 0;
312 }
313
314 static struct clk clk_uart = {
315         .name           = "uartclk",
316         .id             = -1,
317         .parent         = &clk_esysclk,
318         .get_rate       = s3c2443_getrate_uart,
319         .set_rate       = s3c2443_setrate_uart,
320         .round_rate     = s3c2443_roundrate_clksrc16,
321 };
322
323 /* hsspi
324  *
325  * high-speed spi clock, sourced from esysclk
326 */
327
328 static unsigned long s3c2443_getrate_hsspi(struct clk *clk)
329 {
330         unsigned long parent_rate = clk_get_rate(clk->parent);
331         unsigned long div = __raw_readl(S3C2443_CLKDIV1);
332
333         div &= S3C2443_CLKDIV1_HSSPIDIV_MASK;
334         div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
335
336         return parent_rate / (div + 1);
337 }
338
339
340 static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate)
341 {
342         unsigned long parent_rate = clk_get_rate(clk->parent);
343         unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
344
345         rate = s3c2443_roundrate_clksrc4(clk, rate);
346         rate = parent_rate / rate;
347
348         clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK;
349         clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
350
351         __raw_writel(clkdivn, S3C2443_CLKDIV1);
352         return 0;
353 }
354
355 static struct clk clk_hsspi = {
356         .name           = "hsspi",
357         .id             = -1,
358         .parent         = &clk_esysclk,
359         .ctrlbit        = S3C2443_SCLKCON_HSSPICLK,
360         .enable         = s3c2443_clkcon_enable_s,
361         .get_rate       = s3c2443_getrate_hsspi,
362         .set_rate       = s3c2443_setrate_hsspi,
363         .round_rate     = s3c2443_roundrate_clksrc4,
364 };
365
366 /* usbhost
367  *
368  * usb host bus-clock, usually 48MHz to provide USB bus clock timing
369 */
370
371 static unsigned long s3c2443_getrate_usbhost(struct clk *clk)
372 {
373         unsigned long parent_rate = clk_get_rate(clk->parent);
374         unsigned long div = __raw_readl(S3C2443_CLKDIV1);
375
376         div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK;
377         div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
378
379         return parent_rate / (div + 1);
380 }
381
382 static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
383 {
384         unsigned long parent_rate = clk_get_rate(clk->parent);
385         unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
386
387         rate = s3c2443_roundrate_clksrc4(clk, rate);
388         rate = parent_rate / rate;
389
390         clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK;
391         clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
392
393         __raw_writel(clkdivn, S3C2443_CLKDIV1);
394         return 0;
395 }
396
397 struct clk clk_usb_bus_host = {
398         .name           = "usb-bus-host-parent",
399         .id             = -1,
400         .parent         = &clk_esysclk,
401         .ctrlbit        = S3C2443_SCLKCON_USBHOST,
402         .enable         = s3c2443_clkcon_enable_s,
403         .get_rate       = s3c2443_getrate_usbhost,
404         .set_rate       = s3c2443_setrate_usbhost,
405         .round_rate     = s3c2443_roundrate_clksrc4,
406 };
407
408 /* clk_hsmcc_div
409  *
410  * this clock is sourced from epll, and is fed through a divider,
411  * to a mux controlled by sclkcon where either it or a extclk can
412  * be fed to the hsmmc block
413 */
414
415 static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk)
416 {
417         unsigned long parent_rate = clk_get_rate(clk->parent);
418         unsigned long div = __raw_readl(S3C2443_CLKDIV1);
419
420         div &= S3C2443_CLKDIV1_HSMMCDIV_MASK;
421         div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
422
423         return parent_rate / (div + 1);
424 }
425
426 static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate)
427 {
428         unsigned long parent_rate = clk_get_rate(clk->parent);
429         unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
430
431         rate = s3c2443_roundrate_clksrc4(clk, rate);
432         rate = parent_rate / rate;
433
434         clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK;
435         clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
436
437         __raw_writel(clkdivn, S3C2443_CLKDIV1);
438         return 0;
439 }
440
441 static struct clk clk_hsmmc_div = {
442         .name           = "hsmmc-div",
443         .id             = -1,
444         .parent         = &clk_esysclk,
445         .get_rate       = s3c2443_getrate_hsmmc_div,
446         .set_rate       = s3c2443_setrate_hsmmc_div,
447         .round_rate     = s3c2443_roundrate_clksrc4,
448 };
449
450 static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
451 {
452         unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
453
454         clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
455                     S3C2443_SCLKCON_HSMMCCLK_EPLL);
456
457         if (parent == &clk_epll)
458                 clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
459         else if (parent == &clk_ext)
460                 clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
461         else
462                 return -EINVAL;
463
464         if (clk->usage > 0) {
465                 __raw_writel(clksrc, S3C2443_SCLKCON);
466         }
467
468         clk->parent = parent;
469         return 0;
470 }
471
472 static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
473 {
474         return s3c2443_setparent_hsmmc(clk, clk->parent);
475 }
476
477 static struct clk clk_hsmmc = {
478         .name           = "hsmmc-if",
479         .id             = -1,
480         .parent         = &clk_hsmmc_div,
481         .enable         = s3c2443_enable_hsmmc,
482         .set_parent     = s3c2443_setparent_hsmmc,
483 };
484
485 /* i2s_eplldiv
486  *
487  * this clock is the output from the i2s divisor of esysclk
488 */
489
490 static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk)
491 {
492         unsigned long parent_rate = clk_get_rate(clk->parent);
493         unsigned long div = __raw_readl(S3C2443_CLKDIV1);
494
495         div &= S3C2443_CLKDIV1_I2SDIV_MASK;
496         div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT;
497
498         return parent_rate / (div + 1);
499 }
500
501 static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate)
502 {
503         unsigned long parent_rate = clk_get_rate(clk->parent);
504         unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
505
506         rate = s3c2443_roundrate_clksrc16(clk, rate);
507         rate = parent_rate / rate;
508
509         clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK;
510         clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT;
511
512         __raw_writel(clkdivn, S3C2443_CLKDIV1);
513         return 0;
514 }
515
516 static struct clk clk_i2s_eplldiv = {
517         .name           = "i2s-eplldiv",
518         .id             = -1,
519         .parent         = &clk_esysclk,
520         .get_rate       = s3c2443_getrate_i2s_eplldiv,
521         .set_rate       = s3c2443_setrate_i2s_eplldiv,
522         .round_rate     = s3c2443_roundrate_clksrc16,
523 };
524
525 /* i2s-ref
526  *
527  * i2s bus reference clock, selectable from external, esysclk or epllref
528 */
529
530 static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent)
531 {
532         unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
533
534         clksrc &= ~S3C2443_CLKSRC_I2S_MASK;
535
536         if (parent == &clk_epllref)
537                 clksrc |= S3C2443_CLKSRC_I2S_EPLLREF;
538         else if (parent == &clk_i2s_ext)
539                 clksrc |= S3C2443_CLKSRC_I2S_EXT;
540         else if (parent != &clk_i2s_eplldiv)
541                 return -EINVAL;
542
543         clk->parent = parent;
544         __raw_writel(clksrc, S3C2443_CLKSRC);
545
546         return 0;
547 }
548
549 static struct clk clk_i2s = {
550         .name           = "i2s-if",
551         .id             = -1,
552         .parent         = &clk_i2s_eplldiv,
553         .ctrlbit        = S3C2443_SCLKCON_I2SCLK,
554         .enable         = s3c2443_clkcon_enable_s,
555         .set_parent     = s3c2443_setparent_i2s,
556 };
557
558 /* cam-if
559  *
560  * camera interface bus-clock, divided down from esysclk
561 */
562
563 static unsigned long s3c2443_getrate_cam(struct clk *clk)
564 {
565         unsigned long parent_rate = clk_get_rate(clk->parent);
566         unsigned long div = __raw_readl(S3C2443_CLKDIV1);
567
568         div  &= S3C2443_CLKDIV1_CAMDIV_MASK;
569         div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT;
570
571         return parent_rate / (div + 1);
572 }
573
574 static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate)
575 {
576         unsigned long parent_rate = clk_get_rate(clk->parent);
577         unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1);
578
579         rate = s3c2443_roundrate_clksrc16(clk, rate);
580         rate = parent_rate / rate;
581
582         clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK;
583         clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT;
584
585         __raw_writel(clkdiv1, S3C2443_CLKDIV1);
586         return 0;
587 }
588
589 static struct clk clk_cam = {
590         .name           = "camif-upll",         /* same as 2440 name */
591         .id             = -1,
592         .parent         = &clk_esysclk,
593         .ctrlbit        = S3C2443_SCLKCON_CAMCLK,
594         .enable         = s3c2443_clkcon_enable_s,
595         .get_rate       = s3c2443_getrate_cam,
596         .set_rate       = s3c2443_setrate_cam,
597         .round_rate     = s3c2443_roundrate_clksrc16,
598 };
599
600 /* display-if
601  *
602  * display interface clock, divided from esysclk
603 */
604
605 static unsigned long s3c2443_getrate_display(struct clk *clk)
606 {
607         unsigned long parent_rate = clk_get_rate(clk->parent);
608         unsigned long div = __raw_readl(S3C2443_CLKDIV1);
609
610         div &= S3C2443_CLKDIV1_DISPDIV_MASK;
611         div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT;
612
613         return parent_rate / (div + 1);
614 }
615
616 static int s3c2443_setrate_display(struct clk *clk, unsigned long rate)
617 {
618         unsigned long parent_rate = clk_get_rate(clk->parent);
619         unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
620
621         rate = s3c2443_roundrate_clksrc256(clk, rate);
622         rate = parent_rate / rate;
623
624         clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
625         clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
626
627         __raw_writel(clkdivn, S3C2443_CLKDIV1);
628         return 0;
629 }
630
631 static struct clk clk_display = {
632         .name           = "display-if",
633         .id             = -1,
634         .parent         = &clk_esysclk,
635         .ctrlbit        = S3C2443_SCLKCON_DISPCLK,
636         .enable         = s3c2443_clkcon_enable_s,
637         .get_rate       = s3c2443_getrate_display,
638         .set_rate       = s3c2443_setrate_display,
639         .round_rate     = s3c2443_roundrate_clksrc256,
640 };
641
642 /* standard clock definitions */
643
644 static struct clk init_clocks_disable[] = {
645         {
646                 .name           = "nand",
647                 .id             = -1,
648                 .parent         = &clk_h,
649         }, {
650                 .name           = "sdi",
651                 .id             = -1,
652                 .parent         = &clk_p,
653                 .enable         = s3c2443_clkcon_enable_p,
654                 .ctrlbit        = S3C2443_PCLKCON_SDI,
655         }, {
656                 .name           = "adc",
657                 .id             = -1,
658                 .parent         = &clk_p,
659                 .enable         = s3c2443_clkcon_enable_p,
660                 .ctrlbit        = S3C2443_PCLKCON_ADC,
661         }, {
662                 .name           = "i2c",
663                 .id             = -1,
664                 .parent         = &clk_p,
665                 .enable         = s3c2443_clkcon_enable_p,
666                 .ctrlbit        = S3C2443_PCLKCON_IIC,
667         }, {
668                 .name           = "iis",
669                 .id             = -1,
670                 .parent         = &clk_p,
671                 .enable         = s3c2443_clkcon_enable_p,
672                 .ctrlbit        = S3C2443_PCLKCON_IIS,
673         }, {
674                 .name           = "spi",
675                 .id             = 0,
676                 .parent         = &clk_p,
677                 .enable         = s3c2443_clkcon_enable_p,
678                 .ctrlbit        = S3C2443_PCLKCON_SPI0,
679         }, {
680                 .name           = "spi",
681                 .id             = 1,
682                 .parent         = &clk_p,
683                 .enable         = s3c2443_clkcon_enable_p,
684                 .ctrlbit        = S3C2443_PCLKCON_SPI1,
685         }
686 };
687
688 static struct clk init_clocks[] = {
689         {
690                 .name           = "dma",
691                 .id             = 0,
692                 .parent         = &clk_h,
693                 .enable         = s3c2443_clkcon_enable_h,
694                 .ctrlbit        = S3C2443_HCLKCON_DMA0,
695         }, {
696                 .name           = "dma",
697                 .id             = 1,
698                 .parent         = &clk_h,
699                 .enable         = s3c2443_clkcon_enable_h,
700                 .ctrlbit        = S3C2443_HCLKCON_DMA1,
701         }, {
702                 .name           = "dma",
703                 .id             = 2,
704                 .parent         = &clk_h,
705                 .enable         = s3c2443_clkcon_enable_h,
706                 .ctrlbit        = S3C2443_HCLKCON_DMA2,
707         }, {
708                 .name           = "dma",
709                 .id             = 3,
710                 .parent         = &clk_h,
711                 .enable         = s3c2443_clkcon_enable_h,
712                 .ctrlbit        = S3C2443_HCLKCON_DMA3,
713         }, {
714                 .name           = "dma",
715                 .id             = 4,
716                 .parent         = &clk_h,
717                 .enable         = s3c2443_clkcon_enable_h,
718                 .ctrlbit        = S3C2443_HCLKCON_DMA4,
719         }, {
720                 .name           = "dma",
721                 .id             = 5,
722                 .parent         = &clk_h,
723                 .enable         = s3c2443_clkcon_enable_h,
724                 .ctrlbit        = S3C2443_HCLKCON_DMA5,
725         }, {
726                 .name           = "lcd",
727                 .id             = -1,
728                 .parent         = &clk_h,
729                 .enable         = s3c2443_clkcon_enable_h,
730                 .ctrlbit        = S3C2443_HCLKCON_LCDC,
731         }, {
732                 .name           = "gpio",
733                 .id             = -1,
734                 .parent         = &clk_p,
735                 .enable         = s3c2443_clkcon_enable_p,
736                 .ctrlbit        = S3C2443_PCLKCON_GPIO,
737         }, {
738                 .name           = "usb-host",
739                 .id             = -1,
740                 .parent         = &clk_h,
741                 .enable         = s3c2443_clkcon_enable_h,
742                 .ctrlbit        = S3C2443_HCLKCON_USBH,
743         }, {
744                 .name           = "usb-device",
745                 .id             = -1,
746                 .parent         = &clk_h,
747                 .enable         = s3c2443_clkcon_enable_h,
748                 .ctrlbit        = S3C2443_HCLKCON_USBD,
749         }, {
750                 .name           = "timers",
751                 .id             = -1,
752                 .parent         = &clk_p,
753                 .enable         = s3c2443_clkcon_enable_p,
754                 .ctrlbit        = S3C2443_PCLKCON_PWMT,
755         }, {
756                 .name           = "uart",
757                 .id             = 0,
758                 .parent         = &clk_p,
759                 .enable         = s3c2443_clkcon_enable_p,
760                 .ctrlbit        = S3C2443_PCLKCON_UART0,
761         }, {
762                 .name           = "uart",
763                 .id             = 1,
764                 .parent         = &clk_p,
765                 .enable         = s3c2443_clkcon_enable_p,
766                 .ctrlbit        = S3C2443_PCLKCON_UART1,
767         }, {
768                 .name           = "uart",
769                 .id             = 2,
770                 .parent         = &clk_p,
771                 .enable         = s3c2443_clkcon_enable_p,
772                 .ctrlbit        = S3C2443_PCLKCON_UART2,
773         }, {
774                 .name           = "uart",
775                 .id             = 3,
776                 .parent         = &clk_p,
777                 .enable         = s3c2443_clkcon_enable_p,
778                 .ctrlbit        = S3C2443_PCLKCON_UART3,
779         }, {
780                 .name           = "rtc",
781                 .id             = -1,
782                 .parent         = &clk_p,
783                 .enable         = s3c2443_clkcon_enable_p,
784                 .ctrlbit        = S3C2443_PCLKCON_RTC,
785         }, {
786                 .name           = "watchdog",
787                 .id             = -1,
788                 .parent         = &clk_p,
789                 .ctrlbit        = S3C2443_PCLKCON_WDT,
790         }, {
791                 .name           = "usb-bus-host",
792                 .id             = -1,
793                 .parent         = &clk_usb_bus_host,
794         }
795 };
796
797 /* clocks to add where we need to check their parentage */
798
799 /* s3c2443_clk_initparents
800  *
801  * Initialise the parents for the clocks that we get at start-time
802 */
803
804 static int __init clk_init_set_parent(struct clk *clk, struct clk *parent)
805 {
806         printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name);
807         return clk_set_parent(clk, parent);
808 }
809
810 static void __init s3c2443_clk_initparents(void)
811 {
812         unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
813         struct clk *parent;
814
815         switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) {
816         case S3C2443_CLKSRC_EPLLREF_EXTCLK:
817                 parent = &clk_ext;
818                 break;
819
820         case S3C2443_CLKSRC_EPLLREF_XTAL:
821         default:
822                 parent = &clk_xtal;
823                 break;
824
825         case S3C2443_CLKSRC_EPLLREF_MPLLREF:
826         case S3C2443_CLKSRC_EPLLREF_MPLLREF2:
827                 parent = &clk_mpllref;
828                 break;
829         }
830
831         clk_init_set_parent(&clk_epllref, parent);
832
833         switch (clksrc & S3C2443_CLKSRC_I2S_MASK) {
834         case S3C2443_CLKSRC_I2S_EXT:
835                 parent = &clk_i2s_ext;
836                 break;
837
838         case S3C2443_CLKSRC_I2S_EPLLDIV:
839         default:
840                 parent = &clk_i2s_eplldiv;
841                 break;
842
843         case S3C2443_CLKSRC_I2S_EPLLREF:
844         case S3C2443_CLKSRC_I2S_EPLLREF3:
845                 parent = &clk_epllref;
846         }
847
848         clk_init_set_parent(&clk_i2s, &clk_epllref);
849
850         /* esysclk source */
851
852         parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ?
853                 &clk_epll : &clk_epllref;
854
855         clk_init_set_parent(&clk_esysclk, parent);
856
857         /* msysclk source */
858
859         if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) {
860                 parent = &clk_mpll;
861         } else {
862                 parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ?
863                         &clk_mdivclk : &clk_mpllref;
864         }
865
866         clk_init_set_parent(&clk_msysclk, parent);
867 }
868
869 /* armdiv divisor table */
870
871 static unsigned int armdiv[16] = {
872         [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]      = 1,
873         [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]      = 2,
874         [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]      = 3,
875         [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]      = 4,
876         [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]      = 6,
877         [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]      = 8,
878         [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]     = 12,
879         [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]     = 16,
880 };
881
882 static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
883 {
884         clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
885
886         return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
887 }
888
889 static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0)
890 {
891         clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK;
892         clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
893
894         return clkcon0 + 1;
895 }
896
897 /* clocks to add straight away */
898
899 static struct clk *clks[] __initdata = {
900         &clk_ext,
901         &clk_epll,
902         &clk_usb_bus_host,
903         &clk_usb_bus,
904         &clk_esysclk,
905         &clk_epllref,
906         &clk_mpllref,
907         &clk_msysclk,
908         &clk_uart,
909         &clk_display,
910         &clk_cam,
911         &clk_i2s_eplldiv,
912         &clk_i2s,
913         &clk_hsspi,
914         &clk_hsmmc_div,
915         &clk_hsmmc,
916 };
917
918 void __init s3c2443_init_clocks(int xtal)
919 {
920         unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
921         unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
922         unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
923         unsigned long pll;
924         unsigned long fclk;
925         unsigned long hclk;
926         unsigned long pclk;
927         struct clk *clkp;
928         int ret;
929         int ptr;
930
931         pll = s3c2443_get_mpll(mpllcon, xtal);
932
933         fclk = pll / s3c2443_fclk_div(clkdiv0);
934         hclk = fclk / s3c2443_get_prediv(clkdiv0);
935         hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
936         pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
937
938         s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
939
940         printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
941                (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
942                print_mhz(pll), print_mhz(fclk),
943                print_mhz(hclk), print_mhz(pclk));
944
945         s3c2443_clk_initparents();
946
947         for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
948                 clkp = clks[ptr];
949
950                 ret = s3c24xx_register_clock(clkp);
951                 if (ret < 0) {
952                         printk(KERN_ERR "Failed to register clock %s (%d)\n",
953                                clkp->name, ret);
954                 }
955         }
956
957         clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
958
959         clk_usb_bus.parent = &clk_usb_bus_host;
960
961         /* ensure usb bus clock is within correct rate of 48MHz */
962
963         if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) {
964                 printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
965                 clk_set_rate(&clk_usb_bus_host, 48*1000*1000);
966         }
967
968         printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
969                (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
970                print_mhz(clk_get_rate(&clk_epll)),
971                print_mhz(clk_get_rate(&clk_usb_bus)));
972
973         /* register clocks from clock array */
974
975         clkp = init_clocks;
976         for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
977                 ret = s3c24xx_register_clock(clkp);
978                 if (ret < 0) {
979                         printk(KERN_ERR "Failed to register clock %s (%d)\n",
980                                clkp->name, ret);
981                 }
982         }
983
984         /* We must be careful disabling the clocks we are not intending to
985          * be using at boot time, as subsytems such as the LCD which do
986          * their own DMA requests to the bus can cause the system to lockup
987          * if they where in the middle of requesting bus access.
988          *
989          * Disabling the LCD clock if the LCD is active is very dangerous,
990          * and therefore the bootloader should be careful to not enable
991          * the LCD clock if it is not needed.
992         */
993
994         /* install (and disable) the clocks we do not need immediately */
995
996         clkp = init_clocks_disable;
997         for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
998
999                 ret = s3c24xx_register_clock(clkp);
1000                 if (ret < 0) {
1001                         printk(KERN_ERR "Failed to register clock %s (%d)\n",
1002                                clkp->name, ret);
1003                 }
1004
1005                 (clkp->enable)(clkp, 0);
1006         }
1007 }