3 * Copyright (C) 2012 ROCKCHIP, Inc.
5 * This software is licensed under the terms of the GNU General Public
6 * License version 2, as published by the Free Software Foundation, and
7 * may be copied, distributed, and modified under those terms.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/platform_device.h>
19 #include <linux/input.h>
21 #include <linux/delay.h>
22 #include <linux/i2c.h>
23 #include <linux/skbuff.h>
24 #include <linux/spi/spi.h>
25 #include <linux/mmc/host.h>
26 #include <linux/ion.h>
27 #include <linux/cpufreq.h>
28 #include <linux/clk.h>
29 #include <mach/dvfs.h>
31 #include <asm/setup.h>
32 #include <asm/mach-types.h>
33 #include <asm/mach/arch.h>
34 #include <asm/mach/map.h>
35 #include <asm/mach/flash.h>
36 #include <asm/hardware/gic.h>
38 #include <mach/board.h>
39 #include <mach/hardware.h>
41 #include <mach/gpio.h>
42 #include <mach/iomux.h>
44 #include <linux/regulator/machine.h>
45 #include <linux/rfkill-rk.h>
46 #include <linux/sensor-dev.h>
47 #include <linux/mfd/tps65910.h>
48 #include <linux/regulator/rk29-pwm-regulator.h>
49 #if defined(CONFIG_HDMI_RK30)
50 #include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h"
53 #if defined(CONFIG_SPIM_RK29)
54 #include "../../../drivers/spi/rk29_spim.h"
56 #if defined(CONFIG_MU509)
57 #include <linux/mu509.h>
59 #if defined(CONFIG_MW100)
60 #include <linux/mw100.h>
62 #if defined(CONFIG_MT6229)
63 #include <linux/mt6229.h>
65 #if defined(CONFIG_ANDROID_TIMED_GPIO)
66 #include "../../../drivers/staging/android/timed_gpio.h"
69 #ifdef CONFIG_THREE_FB_BUFFER
70 #define RK30_FB0_MEM_SIZE 12*SZ_1M
72 #define RK30_FB0_MEM_SIZE 8*SZ_1M
75 #include "board-rk3066b-sdk-camera.c"
76 #include "board-rk3066b-sdk-key.c"
78 #if defined(CONFIG_TOUCHSCREEN_GT8XX)
79 #define TOUCH_RESET_PIN RK30_PIN2_PC0
80 #define TOUCH_PWR_PIN INVALID_GPIO
81 static int goodix_init_platform_hw(void)
85 rk30_mux_api_set(GPIO2C0_LCDC1DATA16_SMCADDR0_TRACECLK_NAME, GPIO2C_GPIO2C0);
86 rk30_mux_api_set(GPIO0D4_SPI1RXD_NAME, GPIO0D_GPIO0D4);
87 printk("%s:0x%x,0x%x\n",__func__,rk30_mux_api_get(GPIO2C0_LCDC1DATA16_SMCADDR0_TRACECLK_NAME),rk30_mux_api_get(GPIO0D4_SPI1RXD_NAME));
89 if (TOUCH_PWR_PIN != INVALID_GPIO) {
90 ret = gpio_request(TOUCH_PWR_PIN, "goodix power pin");
92 gpio_free(TOUCH_PWR_PIN);
93 printk("goodix power error\n");
96 gpio_direction_output(TOUCH_PWR_PIN, 0);
97 gpio_set_value(TOUCH_PWR_PIN, GPIO_LOW);
101 if (TOUCH_RESET_PIN != INVALID_GPIO) {
102 ret = gpio_request(TOUCH_RESET_PIN, "goodix reset pin");
104 gpio_free(TOUCH_RESET_PIN);
105 printk("goodix gpio_request error\n");
108 gpio_direction_output(TOUCH_RESET_PIN, 1);
110 //gpio_set_value(TOUCH_RESET_PIN, GPIO_LOW);
112 //gpio_set_value(TOUCH_RESET_PIN, GPIO_HIGH);
118 struct goodix_platform_data goodix_info = {
120 .irq_pin = RK30_PIN0_PD4,
121 .rest_pin = TOUCH_RESET_PIN,
122 .init_platform_hw = goodix_init_platform_hw,
126 static struct spi_board_info board_spi_devices[] = {
129 /***********************************************************
131 ************************************************************/
132 #ifdef CONFIG_BACKLIGHT_RK29_BL
134 #define PWM_MUX_NAME GPIO3D3_PWM0_NAME
135 #define PWM_MUX_MODE GPIO3D_PWM0
136 #define PWM_MUX_MODE_GPIO GPIO3D_GPIO3D4
137 #define PWM_GPIO RK30_PIN3_PD4
138 #define PWM_EFFECT_VALUE 1
140 #define LCD_DISP_ON_PIN
142 #ifdef LCD_DISP_ON_PIN
143 #define BL_EN_PIN RK30_PIN0_PA1
144 #define BL_EN_VALUE GPIO_HIGH
146 static int rk29_backlight_io_init(void)
149 rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
150 #ifdef LCD_DISP_ON_PIN
151 // rk30_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
153 ret = gpio_request(BL_EN_PIN, NULL);
155 gpio_free(BL_EN_PIN);
158 gpio_direction_output(BL_EN_PIN, 0);
159 gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
164 static int rk29_backlight_io_deinit(void)
167 #ifdef LCD_DISP_ON_PIN
168 gpio_free(BL_EN_PIN);
170 rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
174 static int rk29_backlight_pwm_suspend(void)
177 rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
178 if (gpio_request(PWM_GPIO, NULL)) {
179 printk("func %s, line %d: request gpio fail\n", __FUNCTION__, __LINE__);
182 gpio_direction_output(PWM_GPIO, GPIO_LOW);
183 #ifdef LCD_DISP_ON_PIN
184 gpio_direction_output(BL_EN_PIN, 0);
185 gpio_set_value(BL_EN_PIN, !BL_EN_VALUE);
190 static int rk29_backlight_pwm_resume(void)
193 rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
194 #ifdef LCD_DISP_ON_PIN
196 gpio_direction_output(BL_EN_PIN, 1);
197 gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
202 static struct rk29_bl_info rk29_bl_info = {
204 .bl_ref = PWM_EFFECT_VALUE,
205 .io_init = rk29_backlight_io_init,
206 .io_deinit = rk29_backlight_io_deinit,
207 .pwm_suspend = rk29_backlight_pwm_suspend,
208 .pwm_resume = rk29_backlight_pwm_resume,
211 static struct platform_device rk29_device_backlight = {
212 .name = "rk29_backlight",
215 .platform_data = &rk29_bl_info,
221 #ifdef CONFIG_RK29_SUPPORT_MODEM
223 #define RK30_MODEM_POWER RK30_PIN2_PB0
224 #define RK30_MODEM_POWER_IOMUX rk29_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0)
226 static int rk30_modem_io_init(void)
228 printk("%s\n", __FUNCTION__);
229 RK30_MODEM_POWER_IOMUX;
234 static struct rk29_io_t rk30_modem_io = {
235 .io_addr = RK30_MODEM_POWER,
238 .io_init = rk30_modem_io_init,
241 static struct platform_device rk30_device_modem = {
242 .name = "rk30_modem",
245 .platform_data = &rk30_modem_io,
249 #if defined(CONFIG_MU509)
250 static int mu509_io_init(void)
253 rk30_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0);
254 rk30_mux_api_set(GPIO2D1_LCDC1DEN_SMCWEN_NAME, GPIO2D_GPIO2D1);
255 rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
256 rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
260 static int mu509_io_deinit(void)
266 struct rk29_mu509_data rk29_mu509_info = {
267 .io_init = mu509_io_init,
268 .io_deinit = mu509_io_deinit,
269 .modem_power_en = RK30_PIN2_PB0,
270 .bp_power = RK30_PIN2_PB0,
271 .bp_reset = RK30_PIN2_PD1,
272 .ap_wakeup_bp = RK30_PIN2_PB7,
273 .bp_wakeup_ap = RK30_PIN6_PA0,
275 struct platform_device rk29_device_mu509 = {
279 .platform_data = &rk29_mu509_info,
283 #if defined(CONFIG_MW100)
284 static int mw100_io_init(void)
286 rk30_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0);
287 rk30_mux_api_set(GPIO2D1_LCDC1DEN_SMCWEN_NAME, GPIO2D_GPIO2D1);
288 rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
289 rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
293 static int mw100_io_deinit(void)
299 struct rk29_mw100_data rk29_mw100_info = {
300 .io_init = mw100_io_init,
301 .io_deinit = mw100_io_deinit,
302 .modem_power_en = RK30_PIN6_PB0,
303 .bp_power = RK30_PIN2_PB0,
304 .bp_reset = RK30_PIN2_PD1,
305 .ap_wakeup_bp = RK30_PIN2_PB7,
306 .bp_wakeup_ap = RK30_PIN6_PA0,
308 struct platform_device rk29_device_mw100 = {
312 .platform_data = &rk29_mw100_info,
316 #if defined(CONFIG_MT6229)
317 static int mt6229_io_init(void)
319 rk30_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0);
320 rk30_mux_api_set(GPIO2D1_LCDC1DEN_SMCWEN_NAME, GPIO2D_GPIO2D1);
321 rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
322 rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
326 static int mt6229_io_deinit(void)
332 struct rk29_mt6229_data rk29_mt6229_info = {
333 .io_init = mt6229_io_init,
334 .io_deinit = mt6229_io_deinit,
335 .modem_power_en = RK30_PIN2_PB0,
336 .bp_power = RK30_PIN2_PB0,//RK30_PIN2_PB6,
337 .bp_reset = RK30_PIN2_PD1,
338 .ap_wakeup_bp = RK30_PIN2_PC0,
339 .bp_wakeup_ap = RK30_PIN6_PA0,
341 struct platform_device rk29_device_mt6229 = {
345 .platform_data = &rk29_mt6229_info,
351 #if defined (CONFIG_GS_MMA8452)
352 #define MMA8452_INT_PIN RK30_PIN3_PD7
354 static int mma8452_init_platform_hw(void)
359 static struct sensor_platform_data mma8452_info = {
360 .type = SENSOR_TYPE_ACCEL,
363 .init_platform_hw = mma8452_init_platform_hw,
364 .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
367 #if defined (CONFIG_GS_LIS3DH)
368 #define LIS3DH_INT_PIN RK30_PIN3_PD7
370 static int lis3dh_init_platform_hw(void)
376 static struct sensor_platform_data lis3dh_info = {
377 .type = SENSOR_TYPE_ACCEL,
380 .init_platform_hw = lis3dh_init_platform_hw,
381 .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
384 #if defined (CONFIG_COMPASS_AK8975)
385 static struct sensor_platform_data akm8975_info =
387 .type = SENSOR_TYPE_COMPASS,
420 #if defined(CONFIG_GYRO_L3G4200D)
422 #include <linux/l3g4200d.h>
423 #define L3G4200D_INT_PIN RK30_PIN0_PB4
425 static int l3g4200d_init_platform_hw(void)
430 static struct sensor_platform_data l3g4200d_info = {
431 .type = SENSOR_TYPE_GYROSCOPE,
434 .orientation = {0, 1, 0, -1, 0, 0, 0, 0, 1},
435 .init_platform_hw = l3g4200d_init_platform_hw,
436 .x_min = 40,//x_min,y_min,z_min = (0-100) according to hardware
443 #ifdef CONFIG_LS_CM3217
444 static struct sensor_platform_data cm3217_info = {
445 .type = SENSOR_TYPE_LIGHT,
447 .poll_delay_ms = 500,
452 #ifdef CONFIG_FB_ROCKCHIP
454 #define LCD_CS_PIN RK30_PIN0_PB0
455 #define LCD_CS_VALUE GPIO_HIGH
457 #define LCD_EN_PIN RK30_PIN0_PB0
458 #define LCD_EN_VALUE GPIO_LOW
460 static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting)
463 ret = gpio_request(LCD_CS_PIN, NULL);
466 gpio_free(LCD_CS_PIN);
467 printk(KERN_ERR "request lcd cs pin fail!\n");
472 gpio_direction_output(LCD_CS_PIN, LCD_CS_VALUE);
474 ret = gpio_request(LCD_EN_PIN, NULL);
477 gpio_free(LCD_EN_PIN);
478 printk(KERN_ERR "request lcd en pin fail!\n");
483 gpio_direction_output(LCD_EN_PIN, LCD_EN_VALUE);
487 static int rk_fb_io_disable(void)
489 gpio_set_value(LCD_CS_PIN, LCD_CS_VALUE? 0:1);
490 gpio_set_value(LCD_EN_PIN, LCD_EN_VALUE? 0:1);
493 static int rk_fb_io_enable(void)
495 gpio_set_value(LCD_CS_PIN, LCD_CS_VALUE);
496 gpio_set_value(LCD_EN_PIN, LCD_EN_VALUE);
500 #if defined(CONFIG_LCDC0_RK31)
501 struct rk29fb_info lcdc0_screen_info = {
502 .prop = PRMRY, //primary display device
503 .io_init = rk_fb_io_init,
504 .io_disable = rk_fb_io_disable,
505 .io_enable = rk_fb_io_enable,
506 .set_screen_info = set_lcd_info,
510 #if defined(CONFIG_LCDC1_RK31)
511 struct rk29fb_info lcdc1_screen_info = {
512 #if defined(CONFIG_HDMI_RK30)
513 .prop = EXTEND, //extend display device
515 .set_screen_info = hdmi_init_lcdc,
520 static struct resource resource_fb[] = {
524 .end = 0,//RK30_FB0_MEM_SIZE - 1,
525 .flags = IORESOURCE_MEM,
528 .name = "ipp buf", //for rotate
530 .end = 0,//RK30_FB0_MEM_SIZE - 1,
531 .flags = IORESOURCE_MEM,
536 .end = 0,//RK30_FB0_MEM_SIZE - 1,
537 .flags = IORESOURCE_MEM,
541 static struct platform_device device_fb = {
544 .num_resources = ARRAY_SIZE(resource_fb),
545 .resource = resource_fb,
549 #if defined(CONFIG_LCDC0_RK31)
550 static struct resource resource_lcdc0[] = {
553 .start = RK30_LCDC0_PHYS,
554 .end = RK30_LCDC0_PHYS + RK30_LCDC0_SIZE - 1,
555 .flags = IORESOURCE_MEM,
562 .flags = IORESOURCE_IRQ,
566 static struct platform_device device_lcdc0 = {
569 .num_resources = ARRAY_SIZE(resource_lcdc0),
570 .resource = resource_lcdc0,
572 .platform_data = &lcdc0_screen_info,
576 #if defined(CONFIG_LCDC1_RK31)
577 static struct resource resource_lcdc1[] = {
580 .start = RK30_LCDC1_PHYS,
581 .end = RK30_LCDC1_PHYS + RK30_LCDC1_SIZE - 1,
582 .flags = IORESOURCE_MEM,
588 .flags = IORESOURCE_IRQ,
592 static struct platform_device device_lcdc1 = {
595 .num_resources = ARRAY_SIZE(resource_lcdc1),
596 .resource = resource_lcdc1,
598 .platform_data = &lcdc1_screen_info,
603 #ifdef CONFIG_ANDROID_TIMED_GPIO
604 static struct timed_gpio timed_gpios[] = {
607 .gpio = RK30_PIN0_PA4,
610 .adjust_time =20, //adjust for diff product
614 static struct timed_gpio_platform_data rk29_vibrator_info = {
616 .gpios = timed_gpios,
619 static struct platform_device rk29_device_vibrator = {
620 .name = "timed-gpio",
623 .platform_data = &rk29_vibrator_info,
629 #ifdef CONFIG_LEDS_GPIO_PLATFORM
630 static struct gpio_led rk29_leds[] = {
632 .name = "button-backlight",
633 .gpio = RK30_PIN2_PB3,
634 .default_trigger = "timer",
636 .retain_state_suspended = 0,
637 .default_state = LEDS_GPIO_DEFSTATE_OFF,
641 static struct gpio_led_platform_data rk29_leds_pdata = {
643 .num_leds = ARRAY_SIZE(rk29_leds),
646 static struct platform_device rk29_device_gpio_leds = {
650 .platform_data = &rk29_leds_pdata,
655 #ifdef CONFIG_RK_IRDA
656 #define IRDA_IRQ_PIN RK30_PIN0_PA3
658 static int irda_iomux_init(void)
663 ret = gpio_request(IRDA_IRQ_PIN, NULL);
665 gpio_free(IRDA_IRQ_PIN);
666 printk(">>>>>> IRDA_IRQ_PIN gpio_request err \n ");
668 gpio_pull_updown(IRDA_IRQ_PIN, PullDisable);
669 gpio_direction_input(IRDA_IRQ_PIN);
674 static int irda_iomux_deinit(void)
676 gpio_free(IRDA_IRQ_PIN);
680 static struct irda_info rk29_irda_info = {
681 .intr_pin = IRDA_IRQ_PIN,
682 .iomux_init = irda_iomux_init,
683 .iomux_deinit = irda_iomux_deinit,
684 //.irda_pwr_ctl = bu92747guw_power_ctl,
687 static struct platform_device irda_device = {
688 #ifdef CONFIG_RK_IRDA_NET
691 .name = "bu92747_irda",
695 .platform_data = &rk29_irda_info,
701 #define ION_RESERVE_SIZE (80 * SZ_1M)
702 static struct ion_platform_data rk30_ion_pdata = {
706 .type = ION_HEAP_TYPE_CARVEOUT,
707 .id = ION_NOR_HEAP_ID,
709 .size = ION_RESERVE_SIZE,
714 static struct platform_device device_ion = {
715 .name = "ion-rockchip",
718 .platform_data = &rk30_ion_pdata,
723 /**************************************************************************************************
724 * SDMMC devices, include the module of SD,MMC,and sdio.noted by xbw at 2012-03-05
725 **************************************************************************************************/
726 #ifdef CONFIG_SDMMC_RK29
727 #include "board-rk3066b-sdk-sdmmc.c"
729 #if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
730 #define SDMMC0_WRITE_PROTECT_PIN RK30_PIN3_PB7 //According to your own project to set the value of write-protect-pin.
733 #if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
734 #define SDMMC1_WRITE_PROTECT_PIN RK30_PIN3_PC7 //According to your own project to set the value of write-protect-pin.
737 #define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK30_PIN6_PB2
739 #endif //endif ---#ifdef CONFIG_SDMMC_RK29
741 #ifdef CONFIG_SDMMC0_RK29
742 static int rk29_sdmmc0_cfg_gpio(void)
744 #ifdef CONFIG_SDMMC_RK29_OLD
745 rk30_mux_api_set(GPIO3B1_SDMMC0CMD_NAME, GPIO3B_SDMMC0_CMD);
746 rk30_mux_api_set(GPIO3B0_SDMMC0CLKOUT_NAME, GPIO3B_SDMMC0_CLKOUT);
747 rk30_mux_api_set(GPIO3B2_SDMMC0DATA0_NAME, GPIO3B_SDMMC0_DATA0);
748 rk30_mux_api_set(GPIO3B3_SDMMC0DATA1_NAME, GPIO3B_SDMMC0_DATA1);
749 rk30_mux_api_set(GPIO3B4_SDMMC0DATA2_NAME, GPIO3B_SDMMC0_DATA2);
750 rk30_mux_api_set(GPIO3B5_SDMMC0DATA3_NAME, GPIO3B_SDMMC0_DATA3);
752 rk30_mux_api_set(GPIO3B6_SDMMC0DETECTN_NAME, GPIO3B_GPIO3B6);
754 rk30_mux_api_set(GPIO3A7_SDMMC0PWREN_NAME, GPIO3A_GPIO3A7);
755 gpio_request(RK30_PIN3_PA7, "sdmmc-power");
756 gpio_direction_output(RK30_PIN3_PA7, GPIO_LOW);
759 rk29_sdmmc_set_iomux(0, 0xFFFF);
761 rk30_mux_api_set(GPIO3B0_SDMMC0DETECTN_NAME, GPIO3B_SDMMC0DETECTN);
763 #if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
764 gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp");
765 gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN);
773 #define CONFIG_SDMMC0_USE_DMA
774 struct rk29_sdmmc_platform_data default_sdmmc0_data = {
776 (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
777 MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
778 MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36),
780 (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
781 .io_init = rk29_sdmmc0_cfg_gpio,
783 #if !defined(CONFIG_SDMMC_RK29_OLD)
784 .set_iomux = rk29_sdmmc_set_iomux,
787 .dma_name = "sd_mmc",
788 #ifdef CONFIG_SDMMC0_USE_DMA
793 .detect_irq = RK30_PIN3_PB6, // INVALID_GPIO
794 .enable_sd_wakeup = 0,
796 #if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
797 .write_prt = SDMMC0_WRITE_PROTECT_PIN,
799 .write_prt = INVALID_GPIO,
802 #endif // CONFIG_SDMMC0_RK29
804 #ifdef CONFIG_SDMMC1_RK29
805 #define CONFIG_SDMMC1_USE_DMA
806 static int rk29_sdmmc1_cfg_gpio(void)
808 #if defined(CONFIG_SDMMC_RK29_OLD)
809 rk30_mux_api_set(GPIO3C0_SMMC1CMD_NAME, GPIO3C_SMMC1_CMD);
810 rk30_mux_api_set(GPIO3C5_SDMMC1CLKOUT_NAME, GPIO3C_SDMMC1_CLKOUT);
811 rk30_mux_api_set(GPIO3C1_SDMMC1DATA0_NAME, GPIO3C_SDMMC1_DATA0);
812 rk30_mux_api_set(GPIO3C2_SDMMC1DATA1_NAME, GPIO3C_SDMMC1_DATA1);
813 rk30_mux_api_set(GPIO3C3_SDMMC1DATA2_NAME, GPIO3C_SDMMC1_DATA2);
814 rk30_mux_api_set(GPIO3C4_SDMMC1DATA3_NAME, GPIO3C_SDMMC1_DATA3);
815 //rk30_mux_api_set(GPIO3C6_SDMMC1DETECTN_NAME, GPIO3C_SDMMC1_DETECT_N);
819 #if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
820 gpio_request(SDMMC1_WRITE_PROTECT_PIN, "sdio-wp");
821 gpio_direction_input(SDMMC1_WRITE_PROTECT_PIN);
829 struct rk29_sdmmc_platform_data default_sdmmc1_data = {
831 (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
832 MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
835 #if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
836 .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
837 MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
840 (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
843 .io_init = rk29_sdmmc1_cfg_gpio,
845 #if !defined(CONFIG_SDMMC_RK29_OLD)
846 .set_iomux = rk29_sdmmc_set_iomux,
850 #ifdef CONFIG_SDMMC1_USE_DMA
856 #if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
857 #ifdef CONFIG_WIFI_CONTROL_FUNC
858 .status = rk29sdk_wifi_status,
859 .register_status_notify = rk29sdk_wifi_status_register,
862 .detect_irq = RK29SDK_WIFI_SDIO_CARD_DETECT_N,
865 #if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
866 .write_prt = SDMMC1_WRITE_PROTECT_PIN,
868 .write_prt = INVALID_GPIO,
872 .detect_irq = INVALID_GPIO,
873 .enable_sd_wakeup = 0,
877 #endif //endif--#ifdef CONFIG_SDMMC1_RK29
879 /**************************************************************************************************
880 * the end of setting for SDMMC devices
881 **************************************************************************************************/
883 #ifdef CONFIG_BATTERY_RK30_ADC
884 static struct rk30_adc_battery_platform_data rk30_adc_battery_platdata = {
885 .dc_det_pin = RK30_PIN0_PB2,
886 .batt_low_pin = RK30_PIN0_PB1,
887 .charge_set_pin = INVALID_GPIO,
888 .charge_ok_pin = RK30_PIN0_PA6,
889 .dc_det_level = GPIO_LOW,
890 .charge_ok_level = GPIO_HIGH,
893 static struct platform_device rk30_device_adc_battery = {
894 .name = "rk30-battery",
897 .platform_data = &rk30_adc_battery_platdata,
901 #ifdef CONFIG_RK30_PWM_REGULATOR
902 const static int pwm_voltage_map[] = {
903 1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000
906 static struct regulator_consumer_supply pwm_dcdc1_consumers[] = {
908 .supply = "vdd_core",
912 struct regulator_init_data pwm_regulator_init_dcdc[1] =
918 .max_uV = 1800000, //0.6-1.8V
920 .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
922 .num_consumer_supplies = ARRAY_SIZE(pwm_dcdc1_consumers),
923 .consumer_supplies = pwm_dcdc1_consumers,
927 static struct pwm_platform_data pwm_regulator_info[1] = {
930 .pwm_gpio = RK30_PIN3_PD6,
931 .pwm_iomux_name = GPIO3D6_PWM3_JTAGTMS_HOSTDRVVBUS_NAME,
932 .pwm_iomux_pwm = GPIO3D_PWM3,
933 .pwm_iomux_gpio = GPIO3D_GPIO3D6,
934 .pwm_voltage = 1100000,
935 .suspend_voltage = 1050000,
938 .coefficient = 455, //45.5%
939 .pwm_voltage_map = pwm_voltage_map,
940 .init_data = &pwm_regulator_init_dcdc[0],
944 struct platform_device pwm_regulator_device[1] = {
946 .name = "pwm-voltage-regulator",
949 .platform_data = &pwm_regulator_info[0],
955 #ifdef CONFIG_RK29_VMAC
956 #define PHY_PWR_EN_GPIO RK30_PIN1_PD6
957 #include "board-rk30-sdk-vmac.c"
960 #ifdef CONFIG_RFKILL_RK
961 // bluetooth rfkill device, its driver in net/rfkill/rfkill-rk.c
962 static struct rfkill_rk_platform_data rfkill_rk_platdata = {
963 .type = RFKILL_TYPE_BLUETOOTH,
965 .poweron_gpio = { // BT_REG_ON
969 .name = GPIO3C6_SDMMC1DETECTN_RMIIRXERR_NAME,
970 .fgpio = GPIO3C_GPIO3C6,
974 .reset_gpio = { // BT_RST
975 .io = RK30_PIN3_PD0, // set io to INVALID_GPIO for disable it
978 .name = GPIO3D0_SDMMC1PWREN_MIIMD_NAME,
979 .fgpio = GPIO3D_GPIO3D0,
983 .wake_gpio = { // BT_WAKE, use to control bt's sleep and wakeup
984 .io = RK30_PIN3_PC5, // set io to INVALID_GPIO for disable it
987 .name = GPIO3C5_SDMMC1CLKOUT_RMIICLKOUT_RMIICLKIN_NAME,
988 .fgpio = GPIO3C_GPIO3C5,
992 .wake_host_irq = { // BT_HOST_WAKE, for bt wakeup host when it is in deep sleep
994 .io = RK30_PIN0_PA5, // set io to INVALID_GPIO for disable it
995 .enable = GPIO_LOW, // set GPIO_LOW for falling, set 0 for rising
1002 .rts_gpio = { // UART_RTS, enable or disable BT's data coming
1003 .io = RK30_PIN1_PA3, // set io to INVALID_GPIO for disable it
1006 .name = GPIO1A3_UART0RTSN_NAME,
1007 .fgpio = GPIO1A_GPIO1A3,
1008 .fmux = GPIO1A_UART0RTSN,
1013 static struct platform_device device_rfkill_rk = {
1014 .name = "rfkill_rk",
1017 .platform_data = &rfkill_rk_platdata,
1022 static struct platform_device *devices[] __initdata = {
1023 #ifdef CONFIG_FB_ROCKCHIP
1026 #if defined(CONFIG_LCDC0_RK31)
1029 #if defined(CONFIG_LCDC1_RK31)
1033 #ifdef CONFIG_BACKLIGHT_RK29_BL
1034 &rk29_device_backlight,
1040 #ifdef CONFIG_ANDROID_TIMED_GPIO
1041 &rk29_device_vibrator,
1043 #ifdef CONFIG_LEDS_GPIO_PLATFORM
1044 &rk29_device_gpio_leds,
1046 #ifdef CONFIG_RK_IRDA
1049 #ifdef CONFIG_WIFI_CONTROL_FUNC
1050 &rk29sdk_wifi_device,
1052 #ifdef CONFIG_RK29_SUPPORT_MODEM
1055 #if defined(CONFIG_MU509)
1058 #if defined(CONFIG_MW100)
1061 #if defined(CONFIG_MT6229)
1062 &rk29_device_mt6229,
1064 #ifdef CONFIG_BATTERY_RK30_ADC
1065 &rk30_device_adc_battery,
1067 #ifdef CONFIG_RFKILL_RK
1073 #ifdef CONFIG_I2C0_RK30
1074 static struct i2c_board_info __initdata i2c0_info[] = {
1075 #if defined (CONFIG_GS_MMA8452)
1077 .type = "gs_mma8452",
1080 .irq = MMA8452_INT_PIN,
1081 .platform_data = &mma8452_info,
1084 #if defined (CONFIG_GS_LIS3DH)
1086 .type = "gs_lis3dh",
1087 .addr = 0x19, //0x19(SA0-->VCC), 0x18(SA0-->GND)
1089 .irq = LIS3DH_INT_PIN,
1090 .platform_data = &lis3dh_info,
1093 #if defined (CONFIG_COMPASS_AK8975)
1098 .irq = RK30_PIN0_PD5,
1099 .platform_data = &akm8975_info,
1102 #if defined (CONFIG_GYRO_L3G4200D)
1104 .type = "l3g4200d_gryo",
1107 .irq = L3G4200D_INT_PIN,
1108 .platform_data = &l3g4200d_info,
1111 #if defined (CONFIG_SND_SOC_RK1000)
1113 .type = "rk1000_i2c_codec",
1118 .type = "rk1000_control",
1123 #if defined (CONFIG_SND_SOC_RT5631)
1131 #ifdef CONFIG_MFD_RK610
1133 .type = "rk610_ctl",
1137 #ifdef CONFIG_RK610_TVOUT
1139 .type = "rk610_tvout",
1144 #ifdef CONFIG_RK610_HDMI
1146 .type = "rk610_hdmi",
1149 .irq = RK29_PIN5_PA2,
1152 #ifdef CONFIG_SND_SOC_RK610
1153 {//RK610_CODEC addr from 0x60 to 0x80 (0x60~0x80)
1154 .type = "rk610_i2c_codec",
1164 #define PMIC_TYPE_WM8326 1
1165 #define PMIC_TYPE_TPS65910 2
1166 int __sramdata g_pmic_type = 0;
1167 #ifdef CONFIG_I2C1_RK30
1168 #ifdef CONFIG_MFD_WM831X_I2C
1169 #include "board-rk3066b-sdk-wm8326.c"
1171 #ifdef CONFIG_MFD_TPS65910
1172 #define TPS65910_HOST_IRQ RK30_PIN6_PA4
1173 #include "board-rk3066b-sdk-tps65910.c"
1176 static struct i2c_board_info __initdata i2c1_info[] = {
1177 #if defined (CONFIG_MFD_WM831X_I2C)
1182 .irq = RK30_PIN0_PB3,
1183 .platform_data = &wm831x_platdata,
1186 #if defined (CONFIG_MFD_TPS65910)
1189 .addr = TPS65910_I2C_ID0,
1191 .irq = TPS65910_HOST_IRQ,
1192 .platform_data = &tps65910_data,
1198 void __sramfunc board_pmu_suspend(void)
1200 #if defined (CONFIG_MFD_WM831X_I2C)
1201 if(g_pmic_type == PMIC_TYPE_WM8326)
1202 board_pmu_wm8326_suspend();
1204 #if defined (CONFIG_MFD_TPS65910)
1205 if(g_pmic_type == PMIC_TYPE_TPS65910)
1206 board_pmu_tps65910_suspend();
1210 void __sramfunc board_pmu_resume(void)
1212 #if defined (CONFIG_MFD_WM831X_I2C)
1213 if(g_pmic_type == PMIC_TYPE_WM8326)
1214 board_pmu_wm8326_resume();
1216 #if defined (CONFIG_MFD_TPS65910)
1217 if(g_pmic_type == PMIC_TYPE_TPS65910)
1218 board_pmu_tps65910_resume();
1222 int __sramdata gpio0d7_iomux,gpio0d7_do,gpio0d7_dir,gpio0d7_en;
1224 void __sramfunc rk30_pwm_logic_suspend_voltage(void)
1226 #ifdef CONFIG_RK30_PWM_REGULATOR
1228 // int gpio0d7_iomux,gpio0d7_do,gpio0d7_dir,gpio0d7_en;
1230 gpio0d7_iomux = readl_relaxed(GRF_GPIO0D_IOMUX);
1231 gpio0d7_do = grf_readl(GRF_GPIO0H_DO);
1232 gpio0d7_dir = grf_readl(GRF_GPIO0H_DIR);
1233 gpio0d7_en = grf_readl(GRF_GPIO0H_EN);
1235 writel_relaxed((1<<30), GRF_GPIO0D_IOMUX);
1236 grf_writel((1<<31)|(1<<15), GRF_GPIO0H_DIR);
1237 grf_writel((1<<31)|(1<<15), GRF_GPIO0H_DO);
1238 grf_writel((1<<31)|(1<<15), GRF_GPIO0H_EN);
1241 void __sramfunc rk30_pwm_logic_resume_voltage(void)
1243 #ifdef CONFIG_RK30_PWM_REGULATOR
1244 writel_relaxed((1<<30)|gpio0d7_iomux, GRF_GPIO0D_IOMUX);
1245 grf_writel((1<<31)|gpio0d7_en, GRF_GPIO0H_EN);
1246 grf_writel((1<<31)|gpio0d7_dir, GRF_GPIO0H_DIR);
1247 grf_writel((1<<31)|gpio0d7_do, GRF_GPIO0H_DO);
1253 extern void pwm_suspend_voltage(void);
1254 extern void pwm_resume_voltage(void);
1255 void rk30_pwm_suspend_voltage_set(void)
1257 #ifdef CONFIG_RK30_PWM_REGULATOR
1258 pwm_suspend_voltage();
1261 void rk30_pwm_resume_voltage_set(void)
1263 #ifdef CONFIG_RK30_PWM_REGULATOR
1264 pwm_resume_voltage();
1269 #ifdef CONFIG_I2C2_RK30
1270 static struct i2c_board_info __initdata i2c2_info[] = {
1271 #if defined (CONFIG_TOUCHSCREEN_GT8XX)
1273 .type = "Goodix-TS",
1276 .irq = RK30_PIN0_PD4,
1277 .platform_data = &goodix_info,
1280 #if defined (CONFIG_LS_CM3217)
1282 .type = "lightsensor",
1285 .platform_data = &cm3217_info,
1291 #ifdef CONFIG_I2C3_RK30
1292 static struct i2c_board_info __initdata i2c3_info[] = {
1296 #ifdef CONFIG_I2C4_RK30
1297 static struct i2c_board_info __initdata i2c4_info[] = {
1301 #ifdef CONFIG_I2C_GPIO_RK30
1302 #define I2C_SDA_PIN INVALID_GPIO// RK30_PIN2_PD6 //set sda_pin here
1303 #define I2C_SCL_PIN INVALID_GPIO//RK30_PIN2_PD7 //set scl_pin here
1304 static int rk30_i2c_io_init(void)
1306 //set iomux (gpio) here
1307 //rk30_mux_api_set(GPIO2D7_I2C1SCL_NAME, GPIO2D_GPIO2D7);
1308 //rk30_mux_api_set(GPIO2D6_I2C1SDA_NAME, GPIO2D_GPIO2D6);
1312 struct i2c_gpio_platform_data default_i2c_gpio_data = {
1313 .sda_pin = I2C_SDA_PIN,
1314 .scl_pin = I2C_SCL_PIN,
1315 .udelay = 5, // clk = 500/udelay = 100Khz
1316 .timeout = 100,//msecs_to_jiffies(100),
1318 .io_init = rk30_i2c_io_init,
1320 static struct i2c_board_info __initdata i2c_gpio_info[] = {
1324 static void __init rk30_i2c_register_board_info(void)
1326 #ifdef CONFIG_I2C0_RK30
1327 i2c_register_board_info(0, i2c0_info, ARRAY_SIZE(i2c0_info));
1329 #ifdef CONFIG_I2C1_RK30
1330 i2c_register_board_info(1, i2c1_info, ARRAY_SIZE(i2c1_info));
1332 #ifdef CONFIG_I2C2_RK30
1333 i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info));
1335 #ifdef CONFIG_I2C3_RK30
1336 i2c_register_board_info(3, i2c3_info, ARRAY_SIZE(i2c3_info));
1338 #ifdef CONFIG_I2C4_RK30
1339 i2c_register_board_info(4, i2c4_info, ARRAY_SIZE(i2c4_info));
1341 #ifdef CONFIG_I2C_GPIO_RK30
1342 i2c_register_board_info(5, i2c_gpio_info, ARRAY_SIZE(i2c_gpio_info));
1347 #define POWER_ON_PIN RK30_PIN0_PA0 //power_hold
1348 static void rk30_pm_power_off(void)
1350 printk(KERN_ERR "rk30_pm_power_off start...\n");
1351 gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
1352 #if defined(CONFIG_MFD_WM831X)
1353 wm831x_set_bits(Wm831x,WM831X_GPIO_LEVEL,0x0001,0x0000); //set sys_pwr 0
1354 wm831x_device_shutdown(Wm831x);//wm8326 shutdown
1359 static void __init machine_rk30_board_init(void)
1362 gpio_request(POWER_ON_PIN, "poweronpin");
1363 gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
1365 pm_power_off = rk30_pm_power_off;
1367 rk30_i2c_register_board_info();
1368 spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
1369 platform_add_devices(devices, ARRAY_SIZE(devices));
1370 board_usb_detect_init(RK30_PIN0_PA7);
1372 #ifdef CONFIG_WIFI_CONTROL_FUNC
1373 rk29sdk_wifi_bt_gpio_control_init();
1377 static void __init rk30_reserve(void)
1380 rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion", ION_RESERVE_SIZE);
1382 #ifdef CONFIG_FB_ROCKCHIP
1383 resource_fb[0].start = board_mem_reserve_add("fb0", RK30_FB0_MEM_SIZE);
1384 resource_fb[0].end = resource_fb[0].start + RK30_FB0_MEM_SIZE - 1;
1386 resource_fb[1].start = board_mem_reserve_add("ipp buf", RK30_FB0_MEM_SIZE);
1387 resource_fb[1].end = resource_fb[1].start + RK30_FB0_MEM_SIZE - 1;
1388 resource_fb[2].start = board_mem_reserve_add("fb2", RK30_FB0_MEM_SIZE);
1389 resource_fb[2].end = resource_fb[2].start + RK30_FB0_MEM_SIZE - 1;
1392 #ifdef CONFIG_VIDEO_RK29
1393 rk30_camera_request_reserve_mem();
1395 board_mem_reserved();
1399 * dvfs_cpu_logic_table: table for arm and logic dvfs
1400 * @frequency : arm frequency
1401 * @cpu_volt : arm voltage depend on frequency
1402 * @logic_volt : logic voltage arm requests depend on frequency
1403 * comments : min arm/logic voltage
1405 static struct dvfs_arm_table dvfs_cpu_logic_table[] = {
1406 {.frequency = 252 * 1000, .cpu_volt = 1075 * 1000, .logic_volt = 1125 * 1000},//0.975V/1.000V
1407 {.frequency = 504 * 1000, .cpu_volt = 1100 * 1000, .logic_volt = 1125 * 1000},//0.975V/1.000V
1408 {.frequency = 816 * 1000, .cpu_volt = 1125 * 1000, .logic_volt = 1150 * 1000},//1.000V/1.025V
1409 {.frequency = 1008 * 1000, .cpu_volt = 1125 * 1000, .logic_volt = 1150 * 1000},//1.025V/1.050V
1410 {.frequency = 1200 * 1000, .cpu_volt = 1175 * 1000, .logic_volt = 1200 * 1000},//1.100V/1.050V
1411 {.frequency = 1272 * 1000, .cpu_volt = 1225 * 1000, .logic_volt = 1200 * 1000},//1.150V/1.100V
1412 {.frequency = 1416 * 1000, .cpu_volt = 1300 * 1000, .logic_volt = 1200 * 1000},//1.225V/1.100V
1413 {.frequency = 1512 * 1000, .cpu_volt = 1350 * 1000, .logic_volt = 1250 * 1000},//1.300V/1.150V
1414 {.frequency = 1608 * 1000, .cpu_volt = 1425 * 1000, .logic_volt = 1300 * 1000},//1.325V/1.175V
1415 {.frequency = CPUFREQ_TABLE_END},
1418 static struct cpufreq_frequency_table dvfs_gpu_table[] = {
1419 {.frequency = 266 * 1000, .index = 1050 * 1000},
1420 {.frequency = 400 * 1000, .index = 1275 * 1000},
1421 {.frequency = CPUFREQ_TABLE_END},
1424 static struct cpufreq_frequency_table dvfs_ddr_table[] = {
1425 {.frequency = 300 * 1000, .index = 1050 * 1000},
1426 {.frequency = 400 * 1000, .index = 1125 * 1000},
1427 {.frequency = CPUFREQ_TABLE_END},
1430 #define DVFS_CPU_TABLE_SIZE (ARRAY_SIZE(dvfs_cpu_logic_table))
1431 static struct cpufreq_frequency_table cpu_dvfs_table[DVFS_CPU_TABLE_SIZE];
1432 static struct cpufreq_frequency_table dep_cpu2core_table[DVFS_CPU_TABLE_SIZE];
1434 void __init board_clock_init(void)
1436 rk30_clock_data_init(periph_pll_default, codec_pll_default, RK30_CLOCKS_DEFAULT_FLAGS);
1437 dvfs_set_arm_logic_volt(dvfs_cpu_logic_table, cpu_dvfs_table, dep_cpu2core_table);
1438 dvfs_set_freq_volt_table(clk_get(NULL, "gpu"), dvfs_gpu_table);
1439 dvfs_set_freq_volt_table(clk_get(NULL, "ddr"), dvfs_ddr_table);
1442 MACHINE_START(RK30, "RK30board")
1443 .boot_params = PLAT_PHYS_OFFSET + 0x800,
1444 .fixup = rk30_fixup,
1445 .reserve = &rk30_reserve,
1446 .map_io = rk30_map_io,
1447 .init_irq = rk30_init_irq,
1448 .timer = &rk30_timer,
1449 .init_machine = machine_rk30_board_init,