arch/arm/mach-omap2/usb-host.c

   1 /*
   2  * usb-host.c - OMAP USB Host
   3  *
   4  * This file will contain the board specific details for the
   5  * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
   6  *
   7  * Copyright (C) 2007-2011 Texas Instruments
   8  * Author: Vikram Pandita <vikram.pandita@ti.com>
   9  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
  10  *
  11  * Generalization by:
  12  * Felipe Balbi <balbi@ti.com>
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License version 2 as
  16  * published by the Free Software Foundation.
  17  */
  18
  19 #include <linux/types.h>
  20 #include <linux/errno.h>
  21 #include <linux/delay.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/slab.h>
  24 #include <linux/dma-mapping.h>
  25
  26 #include <asm/io.h>
  27
  28 #include "soc.h"
  29 #include "omap_device.h"
  30 #include "mux.h"
  31 #include "usb.h"
  32
  33 #ifdef CONFIG_MFD_OMAP_USB_HOST
  34
  35 #define OMAP_USBHS_DEVICE       "usbhs_omap"
  36 #define OMAP_USBTLL_DEVICE      "usbhs_tll"
  37 #define USBHS_UHH_HWMODNAME     "usb_host_hs"
  38 #define USBHS_TLL_HWMODNAME     "usb_tll_hs"
  39
  40 /* MUX settings for EHCI pins */
  41 /*
  42  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  43  */
  44 static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
  45 {
  46         switch (port_mode[0]) {
  47         case OMAP_EHCI_PORT_MODE_PHY:
  48                 omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
  49                 omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
  50                 omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
  51                 omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
  52                 omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
  53                 omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
  54                 omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
  55                 omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
  56                 omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
  57                 omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
  58                 omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
  59                 omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
  60                 break;
  61         case OMAP_EHCI_PORT_MODE_TLL:
  62                 omap_mux_init_signal("hsusb1_tll_stp",
  63                         OMAP_PIN_INPUT_PULLUP);
  64                 omap_mux_init_signal("hsusb1_tll_clk",
  65                         OMAP_PIN_INPUT_PULLDOWN);
  66                 omap_mux_init_signal("hsusb1_tll_dir",
  67                         OMAP_PIN_INPUT_PULLDOWN);
  68                 omap_mux_init_signal("hsusb1_tll_nxt",
  69                         OMAP_PIN_INPUT_PULLDOWN);
  70                 omap_mux_init_signal("hsusb1_tll_data0",
  71                         OMAP_PIN_INPUT_PULLDOWN);
  72                 omap_mux_init_signal("hsusb1_tll_data1",
  73                         OMAP_PIN_INPUT_PULLDOWN);
  74                 omap_mux_init_signal("hsusb1_tll_data2",
  75                         OMAP_PIN_INPUT_PULLDOWN);
  76                 omap_mux_init_signal("hsusb1_tll_data3",
  77                         OMAP_PIN_INPUT_PULLDOWN);
  78                 omap_mux_init_signal("hsusb1_tll_data4",
  79                         OMAP_PIN_INPUT_PULLDOWN);
  80                 omap_mux_init_signal("hsusb1_tll_data5",
  81                         OMAP_PIN_INPUT_PULLDOWN);
  82                 omap_mux_init_signal("hsusb1_tll_data6",
  83                         OMAP_PIN_INPUT_PULLDOWN);
  84                 omap_mux_init_signal("hsusb1_tll_data7",
  85                         OMAP_PIN_INPUT_PULLDOWN);
  86                 break;
  87         case OMAP_USBHS_PORT_MODE_UNUSED:
  88                 /* FALLTHROUGH */
  89         default:
  90                 break;
  91         }
  92
  93         switch (port_mode[1]) {
  94         case OMAP_EHCI_PORT_MODE_PHY:
  95                 omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
  96                 omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
  97                 omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
  98                 omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
  99                 omap_mux_init_signal("hsusb2_data0",
 100                         OMAP_PIN_INPUT_PULLDOWN);
 101                 omap_mux_init_signal("hsusb2_data1",
 102                         OMAP_PIN_INPUT_PULLDOWN);
 103                 omap_mux_init_signal("hsusb2_data2",
 104                         OMAP_PIN_INPUT_PULLDOWN);
 105                 omap_mux_init_signal("hsusb2_data3",
 106                         OMAP_PIN_INPUT_PULLDOWN);
 107                 omap_mux_init_signal("hsusb2_data4",
 108                         OMAP_PIN_INPUT_PULLDOWN);
 109                 omap_mux_init_signal("hsusb2_data5",
 110                         OMAP_PIN_INPUT_PULLDOWN);
 111                 omap_mux_init_signal("hsusb2_data6",
 112                         OMAP_PIN_INPUT_PULLDOWN);
 113                 omap_mux_init_signal("hsusb2_data7",
 114                         OMAP_PIN_INPUT_PULLDOWN);
 115                 break;
 116         case OMAP_EHCI_PORT_MODE_TLL:
 117                 omap_mux_init_signal("hsusb2_tll_stp",
 118                         OMAP_PIN_INPUT_PULLUP);
 119                 omap_mux_init_signal("hsusb2_tll_clk",
 120                         OMAP_PIN_INPUT_PULLDOWN);
 121                 omap_mux_init_signal("hsusb2_tll_dir",
 122                         OMAP_PIN_INPUT_PULLDOWN);
 123                 omap_mux_init_signal("hsusb2_tll_nxt",
 124                         OMAP_PIN_INPUT_PULLDOWN);
 125                 omap_mux_init_signal("hsusb2_tll_data0",
 126                         OMAP_PIN_INPUT_PULLDOWN);
 127                 omap_mux_init_signal("hsusb2_tll_data1",
 128                         OMAP_PIN_INPUT_PULLDOWN);
 129                 omap_mux_init_signal("hsusb2_tll_data2",
 130                         OMAP_PIN_INPUT_PULLDOWN);
 131                 omap_mux_init_signal("hsusb2_tll_data3",
 132                         OMAP_PIN_INPUT_PULLDOWN);
 133                 omap_mux_init_signal("hsusb2_tll_data4",
 134                         OMAP_PIN_INPUT_PULLDOWN);
 135                 omap_mux_init_signal("hsusb2_tll_data5",
 136                         OMAP_PIN_INPUT_PULLDOWN);
 137                 omap_mux_init_signal("hsusb2_tll_data6",
 138                         OMAP_PIN_INPUT_PULLDOWN);
 139                 omap_mux_init_signal("hsusb2_tll_data7",
 140                         OMAP_PIN_INPUT_PULLDOWN);
 141                 break;
 142         case OMAP_USBHS_PORT_MODE_UNUSED:
 143                 /* FALLTHROUGH */
 144         default:
 145                 break;
 146         }
 147
 148         switch (port_mode[2]) {
 149         case OMAP_EHCI_PORT_MODE_PHY:
 150                 printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
 151                 break;
 152         case OMAP_EHCI_PORT_MODE_TLL:
 153                 omap_mux_init_signal("hsusb3_tll_stp",
 154                         OMAP_PIN_INPUT_PULLUP);
 155                 omap_mux_init_signal("hsusb3_tll_clk",
 156                         OMAP_PIN_INPUT_PULLDOWN);
 157                 omap_mux_init_signal("hsusb3_tll_dir",
 158                         OMAP_PIN_INPUT_PULLDOWN);
 159                 omap_mux_init_signal("hsusb3_tll_nxt",
 160                         OMAP_PIN_INPUT_PULLDOWN);
 161                 omap_mux_init_signal("hsusb3_tll_data0",
 162                         OMAP_PIN_INPUT_PULLDOWN);
 163                 omap_mux_init_signal("hsusb3_tll_data1",
 164                         OMAP_PIN_INPUT_PULLDOWN);
 165                 omap_mux_init_signal("hsusb3_tll_data2",
 166                         OMAP_PIN_INPUT_PULLDOWN);
 167                 omap_mux_init_signal("hsusb3_tll_data3",
 168                         OMAP_PIN_INPUT_PULLDOWN);
 169                 omap_mux_init_signal("hsusb3_tll_data4",
 170                         OMAP_PIN_INPUT_PULLDOWN);
 171                 omap_mux_init_signal("hsusb3_tll_data5",
 172                         OMAP_PIN_INPUT_PULLDOWN);
 173                 omap_mux_init_signal("hsusb3_tll_data6",
 174                         OMAP_PIN_INPUT_PULLDOWN);
 175                 omap_mux_init_signal("hsusb3_tll_data7",
 176                         OMAP_PIN_INPUT_PULLDOWN);
 177                 break;
 178         case OMAP_USBHS_PORT_MODE_UNUSED:
 179                 /* FALLTHROUGH */
 180         default:
 181                 break;
 182         }
 183
 184         return;
 185 }
 186
 187 static
 188 void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 189 {
 190         switch (port_mode[0]) {
 191         case OMAP_EHCI_PORT_MODE_PHY:
 192                 omap_mux_init_signal("usbb1_ulpiphy_stp",
 193                         OMAP_PIN_OUTPUT);
 194                 omap_mux_init_signal("usbb1_ulpiphy_clk",
 195                         OMAP_PIN_INPUT_PULLDOWN);
 196                 omap_mux_init_signal("usbb1_ulpiphy_dir",
 197                         OMAP_PIN_INPUT_PULLDOWN);
 198                 omap_mux_init_signal("usbb1_ulpiphy_nxt",
 199                         OMAP_PIN_INPUT_PULLDOWN);
 200                 omap_mux_init_signal("usbb1_ulpiphy_dat0",
 201                         OMAP_PIN_INPUT_PULLDOWN);
 202                 omap_mux_init_signal("usbb1_ulpiphy_dat1",
 203                         OMAP_PIN_INPUT_PULLDOWN);
 204                 omap_mux_init_signal("usbb1_ulpiphy_dat2",
 205                         OMAP_PIN_INPUT_PULLDOWN);
 206                 omap_mux_init_signal("usbb1_ulpiphy_dat3",
 207                         OMAP_PIN_INPUT_PULLDOWN);
 208                 omap_mux_init_signal("usbb1_ulpiphy_dat4",
 209                         OMAP_PIN_INPUT_PULLDOWN);
 210                 omap_mux_init_signal("usbb1_ulpiphy_dat5",
 211                         OMAP_PIN_INPUT_PULLDOWN);
 212                 omap_mux_init_signal("usbb1_ulpiphy_dat6",
 213                         OMAP_PIN_INPUT_PULLDOWN);
 214                 omap_mux_init_signal("usbb1_ulpiphy_dat7",
 215                         OMAP_PIN_INPUT_PULLDOWN);
 216                         break;
 217         case OMAP_EHCI_PORT_MODE_TLL:
 218                 omap_mux_init_signal("usbb1_ulpitll_stp",
 219                         OMAP_PIN_INPUT_PULLUP);
 220                 omap_mux_init_signal("usbb1_ulpitll_clk",
 221                         OMAP_PIN_INPUT_PULLDOWN);
 222                 omap_mux_init_signal("usbb1_ulpitll_dir",
 223                         OMAP_PIN_INPUT_PULLDOWN);
 224                 omap_mux_init_signal("usbb1_ulpitll_nxt",
 225                         OMAP_PIN_INPUT_PULLDOWN);
 226                 omap_mux_init_signal("usbb1_ulpitll_dat0",
 227                         OMAP_PIN_INPUT_PULLDOWN);
 228                 omap_mux_init_signal("usbb1_ulpitll_dat1",
 229                         OMAP_PIN_INPUT_PULLDOWN);
 230                 omap_mux_init_signal("usbb1_ulpitll_dat2",
 231                         OMAP_PIN_INPUT_PULLDOWN);
 232                 omap_mux_init_signal("usbb1_ulpitll_dat3",
 233                         OMAP_PIN_INPUT_PULLDOWN);
 234                 omap_mux_init_signal("usbb1_ulpitll_dat4",
 235                         OMAP_PIN_INPUT_PULLDOWN);
 236                 omap_mux_init_signal("usbb1_ulpitll_dat5",
 237                         OMAP_PIN_INPUT_PULLDOWN);
 238                 omap_mux_init_signal("usbb1_ulpitll_dat6",
 239                         OMAP_PIN_INPUT_PULLDOWN);
 240                 omap_mux_init_signal("usbb1_ulpitll_dat7",
 241                         OMAP_PIN_INPUT_PULLDOWN);
 242                         break;
 243         case OMAP_USBHS_PORT_MODE_UNUSED:
 244         default:
 245                         break;
 246         }
 247         switch (port_mode[1]) {
 248         case OMAP_EHCI_PORT_MODE_PHY:
 249                 omap_mux_init_signal("usbb2_ulpiphy_stp",
 250                         OMAP_PIN_OUTPUT);
 251                 omap_mux_init_signal("usbb2_ulpiphy_clk",
 252                         OMAP_PIN_INPUT_PULLDOWN);
 253                 omap_mux_init_signal("usbb2_ulpiphy_dir",
 254                         OMAP_PIN_INPUT_PULLDOWN);
 255                 omap_mux_init_signal("usbb2_ulpiphy_nxt",
 256                         OMAP_PIN_INPUT_PULLDOWN);
 257                 omap_mux_init_signal("usbb2_ulpiphy_dat0",
 258                         OMAP_PIN_INPUT_PULLDOWN);
 259                 omap_mux_init_signal("usbb2_ulpiphy_dat1",
 260                         OMAP_PIN_INPUT_PULLDOWN);
 261                 omap_mux_init_signal("usbb2_ulpiphy_dat2",
 262                         OMAP_PIN_INPUT_PULLDOWN);
 263                 omap_mux_init_signal("usbb2_ulpiphy_dat3",
 264                         OMAP_PIN_INPUT_PULLDOWN);
 265                 omap_mux_init_signal("usbb2_ulpiphy_dat4",
 266                         OMAP_PIN_INPUT_PULLDOWN);
 267                 omap_mux_init_signal("usbb2_ulpiphy_dat5",
 268                         OMAP_PIN_INPUT_PULLDOWN);
 269                 omap_mux_init_signal("usbb2_ulpiphy_dat6",
 270                         OMAP_PIN_INPUT_PULLDOWN);
 271                 omap_mux_init_signal("usbb2_ulpiphy_dat7",
 272                         OMAP_PIN_INPUT_PULLDOWN);
 273                         break;
 274         case OMAP_EHCI_PORT_MODE_TLL:
 275                 omap_mux_init_signal("usbb2_ulpitll_stp",
 276                         OMAP_PIN_INPUT_PULLUP);
 277                 omap_mux_init_signal("usbb2_ulpitll_clk",
 278                         OMAP_PIN_INPUT_PULLDOWN);
 279                 omap_mux_init_signal("usbb2_ulpitll_dir",
 280                         OMAP_PIN_INPUT_PULLDOWN);
 281                 omap_mux_init_signal("usbb2_ulpitll_nxt",
 282                         OMAP_PIN_INPUT_PULLDOWN);
 283                 omap_mux_init_signal("usbb2_ulpitll_dat0",
 284                         OMAP_PIN_INPUT_PULLDOWN);
 285                 omap_mux_init_signal("usbb2_ulpitll_dat1",
 286                         OMAP_PIN_INPUT_PULLDOWN);
 287                 omap_mux_init_signal("usbb2_ulpitll_dat2",
 288                         OMAP_PIN_INPUT_PULLDOWN);
 289                 omap_mux_init_signal("usbb2_ulpitll_dat3",
 290                         OMAP_PIN_INPUT_PULLDOWN);
 291                 omap_mux_init_signal("usbb2_ulpitll_dat4",
 292                         OMAP_PIN_INPUT_PULLDOWN);
 293                 omap_mux_init_signal("usbb2_ulpitll_dat5",
 294                         OMAP_PIN_INPUT_PULLDOWN);
 295                 omap_mux_init_signal("usbb2_ulpitll_dat6",
 296                         OMAP_PIN_INPUT_PULLDOWN);
 297                 omap_mux_init_signal("usbb2_ulpitll_dat7",
 298                         OMAP_PIN_INPUT_PULLDOWN);
 299                         break;
 300         case OMAP_USBHS_PORT_MODE_UNUSED:
 301         default:
 302                         break;
 303         }
 304 }
 305
 306 static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 307 {
 308         switch (port_mode[0]) {
 309         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 310         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 311         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 312         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 313                 omap_mux_init_signal("mm1_rxdp",
 314                         OMAP_PIN_INPUT_PULLDOWN);
 315                 omap_mux_init_signal("mm1_rxdm",
 316                         OMAP_PIN_INPUT_PULLDOWN);
 317                 /* FALLTHROUGH */
 318         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 319         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 320                 omap_mux_init_signal("mm1_rxrcv",
 321                         OMAP_PIN_INPUT_PULLDOWN);
 322                 /* FALLTHROUGH */
 323         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 324         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 325                 omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
 326                 /* FALLTHROUGH */
 327         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 328         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 329                 omap_mux_init_signal("mm1_txse0",
 330                         OMAP_PIN_INPUT_PULLDOWN);
 331                 omap_mux_init_signal("mm1_txdat",
 332                         OMAP_PIN_INPUT_PULLDOWN);
 333                 break;
 334         case OMAP_USBHS_PORT_MODE_UNUSED:
 335                 /* FALLTHROUGH */
 336         default:
 337                 break;
 338         }
 339         switch (port_mode[1]) {
 340         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 341         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 342         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 343         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 344                 omap_mux_init_signal("mm2_rxdp",
 345                         OMAP_PIN_INPUT_PULLDOWN);
 346                 omap_mux_init_signal("mm2_rxdm",
 347                         OMAP_PIN_INPUT_PULLDOWN);
 348                 /* FALLTHROUGH */
 349         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 350         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 351                 omap_mux_init_signal("mm2_rxrcv",
 352                         OMAP_PIN_INPUT_PULLDOWN);
 353                 /* FALLTHROUGH */
 354         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 355         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 356                 omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
 357                 /* FALLTHROUGH */
 358         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 359         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 360                 omap_mux_init_signal("mm2_txse0",
 361                         OMAP_PIN_INPUT_PULLDOWN);
 362                 omap_mux_init_signal("mm2_txdat",
 363                         OMAP_PIN_INPUT_PULLDOWN);
 364                 break;
 365         case OMAP_USBHS_PORT_MODE_UNUSED:
 366                 /* FALLTHROUGH */
 367         default:
 368                 break;
 369         }
 370         switch (port_mode[2]) {
 371         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 372         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 373         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 374         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 375                 omap_mux_init_signal("mm3_rxdp",
 376                         OMAP_PIN_INPUT_PULLDOWN);
 377                 omap_mux_init_signal("mm3_rxdm",
 378                         OMAP_PIN_INPUT_PULLDOWN);
 379                 /* FALLTHROUGH */
 380         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 381         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 382                 omap_mux_init_signal("mm3_rxrcv",
 383                         OMAP_PIN_INPUT_PULLDOWN);
 384                 /* FALLTHROUGH */
 385         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 386         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 387                 omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
 388                 /* FALLTHROUGH */
 389         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 390         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 391                 omap_mux_init_signal("mm3_txse0",
 392                         OMAP_PIN_INPUT_PULLDOWN);
 393                 omap_mux_init_signal("mm3_txdat",
 394                         OMAP_PIN_INPUT_PULLDOWN);
 395                 break;
 396         case OMAP_USBHS_PORT_MODE_UNUSED:
 397                 /* FALLTHROUGH */
 398         default:
 399                 break;
 400         }
 401 }
 402
 403 static
 404 void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 405 {
 406         switch (port_mode[0]) {
 407         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 408         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 409         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 410         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 411                 omap_mux_init_signal("usbb1_mm_rxdp",
 412                         OMAP_PIN_INPUT_PULLDOWN);
 413                 omap_mux_init_signal("usbb1_mm_rxdm",
 414                         OMAP_PIN_INPUT_PULLDOWN);
 415
 416         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 417         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 418                 omap_mux_init_signal("usbb1_mm_rxrcv",
 419                         OMAP_PIN_INPUT_PULLDOWN);
 420
 421         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 422         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 423                 omap_mux_init_signal("usbb1_mm_txen",
 424                         OMAP_PIN_INPUT_PULLDOWN);
 425
 426
 427         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 428         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 429                 omap_mux_init_signal("usbb1_mm_txdat",
 430                         OMAP_PIN_INPUT_PULLDOWN);
 431                 omap_mux_init_signal("usbb1_mm_txse0",
 432                         OMAP_PIN_INPUT_PULLDOWN);
 433                 break;
 434
 435         case OMAP_USBHS_PORT_MODE_UNUSED:
 436         default:
 437                 break;
 438         }
 439
 440         switch (port_mode[1]) {
 441         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 442         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 443         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 444         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 445                 omap_mux_init_signal("usbb2_mm_rxdp",
 446                         OMAP_PIN_INPUT_PULLDOWN);
 447                 omap_mux_init_signal("usbb2_mm_rxdm",
 448                         OMAP_PIN_INPUT_PULLDOWN);
 449
 450         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 451         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 452                 omap_mux_init_signal("usbb2_mm_rxrcv",
 453                         OMAP_PIN_INPUT_PULLDOWN);
 454
 455         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 456         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 457                 omap_mux_init_signal("usbb2_mm_txen",
 458                         OMAP_PIN_INPUT_PULLDOWN);
 459
 460
 461         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 462         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 463                 omap_mux_init_signal("usbb2_mm_txdat",
 464                         OMAP_PIN_INPUT_PULLDOWN);
 465                 omap_mux_init_signal("usbb2_mm_txse0",
 466                         OMAP_PIN_INPUT_PULLDOWN);
 467                 break;
 468
 469         case OMAP_USBHS_PORT_MODE_UNUSED:
 470         default:
 471                 break;
 472         }
 473 }
 474
 475 void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 476 {
 477         struct omap_hwmod       *uhh_hwm, *tll_hwm;
 478         struct platform_device  *pdev;
 479         int                     bus_id = -1;
 480
 481         if (cpu_is_omap34xx()) {
 482                 setup_ehci_io_mux(pdata->port_mode);
 483                 setup_ohci_io_mux(pdata->port_mode);
 484
 485                 if (omap_rev() <= OMAP3430_REV_ES2_1)
 486                         pdata->single_ulpi_bypass = true;
 487
 488         } else if (cpu_is_omap44xx()) {
 489                 setup_4430ehci_io_mux(pdata->port_mode);
 490                 setup_4430ohci_io_mux(pdata->port_mode);
 491         }
 492
 493         uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
 494         if (!uhh_hwm) {
 495                 pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
 496                 return;
 497         }
 498
 499         tll_hwm = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
 500         if (!tll_hwm) {
 501                 pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
 502                 return;
 503         }
 504
 505         pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm,
 506                                 pdata, sizeof(*pdata));
 507         if (IS_ERR(pdev)) {
 508                 pr_err("Could not build hwmod device %s\n",
 509                        USBHS_TLL_HWMODNAME);
 510                 return;
 511         }
 512
 513         pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm,
 514                                 pdata, sizeof(*pdata));
 515         if (IS_ERR(pdev)) {
 516                 pr_err("Could not build hwmod devices %s\n",
 517                        USBHS_UHH_HWMODNAME);
 518                 return;
 519         }
 520 }
 521
 522 #else
 523
 524 void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 525 {
 526 }
 527
 528 #endif