arch/arm/mach-at91/at91sam9261_devices.c

   1 /*
   2  * arch/arm/mach-at91/at91sam9261_devices.c
   3  *
   4  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
   5  *  Copyright (C) 2005 David Brownell
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  */
  13 #include <asm/mach/arch.h>
  14 #include <asm/mach/map.h>
  15
  16 #include <linux/dma-mapping.h>
  17 #include <linux/gpio.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/i2c-gpio.h>
  20
  21 #include <linux/fb.h>
  22 #include <video/atmel_lcdc.h>
  23
  24 #include <mach/board.h>
  25 #include <mach/at91sam9261.h>
  26 #include <mach/at91sam9261_matrix.h>
  27 #include <mach/at91_matrix.h>
  28 #include <mach/at91sam9_smc.h>
  29
  30 #include "generic.h"
  31
  32
  33 /* --------------------------------------------------------------------
  34  *  USB Host
  35  * -------------------------------------------------------------------- */
  36
  37 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
  38 static u64 ohci_dmamask = DMA_BIT_MASK(32);
  39 static struct at91_usbh_data usbh_data;
  40
  41 static struct resource usbh_resources[] = {
  42         [0] = {
  43                 .start  = AT91SAM9261_UHP_BASE,
  44                 .end    = AT91SAM9261_UHP_BASE + SZ_1M - 1,
  45                 .flags  = IORESOURCE_MEM,
  46         },
  47         [1] = {
  48                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP,
  49                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP,
  50                 .flags  = IORESOURCE_IRQ,
  51         },
  52 };
  53
  54 static struct platform_device at91sam9261_usbh_device = {
  55         .name           = "at91_ohci",
  56         .id             = -1,
  57         .dev            = {
  58                                 .dma_mask               = &ohci_dmamask,
  59                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
  60                                 .platform_data          = &usbh_data,
  61         },
  62         .resource       = usbh_resources,
  63         .num_resources  = ARRAY_SIZE(usbh_resources),
  64 };
  65
  66 void __init at91_add_device_usbh(struct at91_usbh_data *data)
  67 {
  68         int i;
  69
  70         if (!data)
  71                 return;
  72
  73         /* Enable overcurrent notification */
  74         for (i = 0; i < data->ports; i++) {
  75                 if (data->overcurrent_pin[i])
  76                         at91_set_gpio_input(data->overcurrent_pin[i], 1);
  77         }
  78
  79         usbh_data = *data;
  80         platform_device_register(&at91sam9261_usbh_device);
  81 }
  82 #else
  83 void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  84 #endif
  85
  86
  87 /* --------------------------------------------------------------------
  88  *  USB Device (Gadget)
  89  * -------------------------------------------------------------------- */
  90
  91 #if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
  92 static struct at91_udc_data udc_data;
  93
  94 static struct resource udc_resources[] = {
  95         [0] = {
  96                 .start  = AT91SAM9261_BASE_UDP,
  97                 .end    = AT91SAM9261_BASE_UDP + SZ_16K - 1,
  98                 .flags  = IORESOURCE_MEM,
  99         },
 100         [1] = {
 101                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP,
 102                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP,
 103                 .flags  = IORESOURCE_IRQ,
 104         },
 105 };
 106
 107 static struct platform_device at91sam9261_udc_device = {
 108         .name           = "at91_udc",
 109         .id             = -1,
 110         .dev            = {
 111                                 .platform_data          = &udc_data,
 112         },
 113         .resource       = udc_resources,
 114         .num_resources  = ARRAY_SIZE(udc_resources),
 115 };
 116
 117 void __init at91_add_device_udc(struct at91_udc_data *data)
 118 {
 119         if (!data)
 120                 return;
 121
 122         if (gpio_is_valid(data->vbus_pin)) {
 123                 at91_set_gpio_input(data->vbus_pin, 0);
 124                 at91_set_deglitch(data->vbus_pin, 1);
 125         }
 126
 127         /* Pullup pin is handled internally by USB device peripheral */
 128
 129         udc_data = *data;
 130         platform_device_register(&at91sam9261_udc_device);
 131 }
 132 #else
 133 void __init at91_add_device_udc(struct at91_udc_data *data) {}
 134 #endif
 135
 136 /* --------------------------------------------------------------------
 137  *  MMC / SD
 138  * -------------------------------------------------------------------- */
 139
 140 #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
 141 static u64 mmc_dmamask = DMA_BIT_MASK(32);
 142 static struct at91_mmc_data mmc_data;
 143
 144 static struct resource mmc_resources[] = {
 145         [0] = {
 146                 .start  = AT91SAM9261_BASE_MCI,
 147                 .end    = AT91SAM9261_BASE_MCI + SZ_16K - 1,
 148                 .flags  = IORESOURCE_MEM,
 149         },
 150         [1] = {
 151                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI,
 152                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI,
 153                 .flags  = IORESOURCE_IRQ,
 154         },
 155 };
 156
 157 static struct platform_device at91sam9261_mmc_device = {
 158         .name           = "at91_mci",
 159         .id             = -1,
 160         .dev            = {
 161                                 .dma_mask               = &mmc_dmamask,
 162                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 163                                 .platform_data          = &mmc_data,
 164         },
 165         .resource       = mmc_resources,
 166         .num_resources  = ARRAY_SIZE(mmc_resources),
 167 };
 168
 169 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 170 {
 171         if (!data)
 172                 return;
 173
 174         /* input/irq */
 175         if (gpio_is_valid(data->det_pin)) {
 176                 at91_set_gpio_input(data->det_pin, 1);
 177                 at91_set_deglitch(data->det_pin, 1);
 178         }
 179         if (gpio_is_valid(data->wp_pin))
 180                 at91_set_gpio_input(data->wp_pin, 1);
 181         if (gpio_is_valid(data->vcc_pin))
 182                 at91_set_gpio_output(data->vcc_pin, 0);
 183
 184         /* CLK */
 185         at91_set_B_periph(AT91_PIN_PA2, 0);
 186
 187         /* CMD */
 188         at91_set_B_periph(AT91_PIN_PA1, 1);
 189
 190         /* DAT0, maybe DAT1..DAT3 */
 191         at91_set_B_periph(AT91_PIN_PA0, 1);
 192         if (data->wire4) {
 193                 at91_set_B_periph(AT91_PIN_PA4, 1);
 194                 at91_set_B_periph(AT91_PIN_PA5, 1);
 195                 at91_set_B_periph(AT91_PIN_PA6, 1);
 196         }
 197
 198         mmc_data = *data;
 199         platform_device_register(&at91sam9261_mmc_device);
 200 }
 201 #else
 202 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 203 #endif
 204
 205
 206 /* --------------------------------------------------------------------
 207  *  NAND / SmartMedia
 208  * -------------------------------------------------------------------- */
 209
 210 #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 211 static struct atmel_nand_data nand_data;
 212
 213 #define NAND_BASE       AT91_CHIPSELECT_3
 214
 215 static struct resource nand_resources[] = {
 216         {
 217                 .start  = NAND_BASE,
 218                 .end    = NAND_BASE + SZ_256M - 1,
 219                 .flags  = IORESOURCE_MEM,
 220         }
 221 };
 222
 223 static struct platform_device atmel_nand_device = {
 224         .name           = "atmel_nand",
 225         .id             = -1,
 226         .dev            = {
 227                                 .platform_data  = &nand_data,
 228         },
 229         .resource       = nand_resources,
 230         .num_resources  = ARRAY_SIZE(nand_resources),
 231 };
 232
 233 void __init at91_add_device_nand(struct atmel_nand_data *data)
 234 {
 235         unsigned long csa;
 236
 237         if (!data)
 238                 return;
 239
 240         csa = at91_matrix_read(AT91_MATRIX_EBICSA);
 241         at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 242
 243         /* enable pin */
 244         if (gpio_is_valid(data->enable_pin))
 245                 at91_set_gpio_output(data->enable_pin, 1);
 246
 247         /* ready/busy pin */
 248         if (gpio_is_valid(data->rdy_pin))
 249                 at91_set_gpio_input(data->rdy_pin, 1);
 250
 251         /* card detect pin */
 252         if (gpio_is_valid(data->det_pin))
 253                 at91_set_gpio_input(data->det_pin, 1);
 254
 255         at91_set_A_periph(AT91_PIN_PC0, 0);             /* NANDOE */
 256         at91_set_A_periph(AT91_PIN_PC1, 0);             /* NANDWE */
 257
 258         nand_data = *data;
 259         platform_device_register(&atmel_nand_device);
 260 }
 261
 262 #else
 263 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 264 #endif
 265
 266
 267 /* --------------------------------------------------------------------
 268  *  TWI (i2c)
 269  * -------------------------------------------------------------------- */
 270
 271 /*
 272  * Prefer the GPIO code since the TWI controller isn't robust
 273  * (gets overruns and underruns under load) and can only issue
 274  * repeated STARTs in one scenario (the driver doesn't yet handle them).
 275  */
 276 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 277
 278 static struct i2c_gpio_platform_data pdata = {
 279         .sda_pin                = AT91_PIN_PA7,
 280         .sda_is_open_drain      = 1,
 281         .scl_pin                = AT91_PIN_PA8,
 282         .scl_is_open_drain      = 1,
 283         .udelay                 = 2,            /* ~100 kHz */
 284 };
 285
 286 static struct platform_device at91sam9261_twi_device = {
 287         .name                   = "i2c-gpio",
 288         .id                     = -1,
 289         .dev.platform_data      = &pdata,
 290 };
 291
 292 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 293 {
 294         at91_set_GPIO_periph(AT91_PIN_PA7, 1);          /* TWD (SDA) */
 295         at91_set_multi_drive(AT91_PIN_PA7, 1);
 296
 297         at91_set_GPIO_periph(AT91_PIN_PA8, 1);          /* TWCK (SCL) */
 298         at91_set_multi_drive(AT91_PIN_PA8, 1);
 299
 300         i2c_register_board_info(0, devices, nr_devices);
 301         platform_device_register(&at91sam9261_twi_device);
 302 }
 303
 304 #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 305
 306 static struct resource twi_resources[] = {
 307         [0] = {
 308                 .start  = AT91SAM9261_BASE_TWI,
 309                 .end    = AT91SAM9261_BASE_TWI + SZ_16K - 1,
 310                 .flags  = IORESOURCE_MEM,
 311         },
 312         [1] = {
 313                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI,
 314                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI,
 315                 .flags  = IORESOURCE_IRQ,
 316         },
 317 };
 318
 319 static struct platform_device at91sam9261_twi_device = {
 320         .name           = "at91_i2c",
 321         .id             = -1,
 322         .resource       = twi_resources,
 323         .num_resources  = ARRAY_SIZE(twi_resources),
 324 };
 325
 326 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 327 {
 328         /* pins used for TWI interface */
 329         at91_set_A_periph(AT91_PIN_PA7, 0);             /* TWD */
 330         at91_set_multi_drive(AT91_PIN_PA7, 1);
 331
 332         at91_set_A_periph(AT91_PIN_PA8, 0);             /* TWCK */
 333         at91_set_multi_drive(AT91_PIN_PA8, 1);
 334
 335         i2c_register_board_info(0, devices, nr_devices);
 336         platform_device_register(&at91sam9261_twi_device);
 337 }
 338 #else
 339 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 340 #endif
 341
 342
 343 /* --------------------------------------------------------------------
 344  *  SPI
 345  * -------------------------------------------------------------------- */
 346
 347 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 348 static u64 spi_dmamask = DMA_BIT_MASK(32);
 349
 350 static struct resource spi0_resources[] = {
 351         [0] = {
 352                 .start  = AT91SAM9261_BASE_SPI0,
 353                 .end    = AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
 354                 .flags  = IORESOURCE_MEM,
 355         },
 356         [1] = {
 357                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0,
 358                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0,
 359                 .flags  = IORESOURCE_IRQ,
 360         },
 361 };
 362
 363 static struct platform_device at91sam9261_spi0_device = {
 364         .name           = "atmel_spi",
 365         .id             = 0,
 366         .dev            = {
 367                                 .dma_mask               = &spi_dmamask,
 368                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 369         },
 370         .resource       = spi0_resources,
 371         .num_resources  = ARRAY_SIZE(spi0_resources),
 372 };
 373
 374 static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
 375
 376 static struct resource spi1_resources[] = {
 377         [0] = {
 378                 .start  = AT91SAM9261_BASE_SPI1,
 379                 .end    = AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
 380                 .flags  = IORESOURCE_MEM,
 381         },
 382         [1] = {
 383                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1,
 384                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1,
 385                 .flags  = IORESOURCE_IRQ,
 386         },
 387 };
 388
 389 static struct platform_device at91sam9261_spi1_device = {
 390         .name           = "atmel_spi",
 391         .id             = 1,
 392         .dev            = {
 393                                 .dma_mask               = &spi_dmamask,
 394                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 395         },
 396         .resource       = spi1_resources,
 397         .num_resources  = ARRAY_SIZE(spi1_resources),
 398 };
 399
 400 static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
 401
 402 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 403 {
 404         int i;
 405         unsigned long cs_pin;
 406         short enable_spi0 = 0;
 407         short enable_spi1 = 0;
 408
 409         /* Choose SPI chip-selects */
 410         for (i = 0; i < nr_devices; i++) {
 411                 if (devices[i].controller_data)
 412                         cs_pin = (unsigned long) devices[i].controller_data;
 413                 else if (devices[i].bus_num == 0)
 414                         cs_pin = spi0_standard_cs[devices[i].chip_select];
 415                 else
 416                         cs_pin = spi1_standard_cs[devices[i].chip_select];
 417
 418                 if (!gpio_is_valid(cs_pin))
 419                         continue;
 420
 421                 if (devices[i].bus_num == 0)
 422                         enable_spi0 = 1;
 423                 else
 424                         enable_spi1 = 1;
 425
 426                 /* enable chip-select pin */
 427                 at91_set_gpio_output(cs_pin, 1);
 428
 429                 /* pass chip-select pin to driver */
 430                 devices[i].controller_data = (void *) cs_pin;
 431         }
 432
 433         spi_register_board_info(devices, nr_devices);
 434
 435         /* Configure SPI bus(es) */
 436         if (enable_spi0) {
 437                 at91_set_A_periph(AT91_PIN_PA0, 0);     /* SPI0_MISO */
 438                 at91_set_A_periph(AT91_PIN_PA1, 0);     /* SPI0_MOSI */
 439                 at91_set_A_periph(AT91_PIN_PA2, 0);     /* SPI0_SPCK */
 440
 441                 platform_device_register(&at91sam9261_spi0_device);
 442         }
 443         if (enable_spi1) {
 444                 at91_set_A_periph(AT91_PIN_PB30, 0);    /* SPI1_MISO */
 445                 at91_set_A_periph(AT91_PIN_PB31, 0);    /* SPI1_MOSI */
 446                 at91_set_A_periph(AT91_PIN_PB29, 0);    /* SPI1_SPCK */
 447
 448                 platform_device_register(&at91sam9261_spi1_device);
 449         }
 450 }
 451 #else
 452 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
 453 #endif
 454
 455
 456 /* --------------------------------------------------------------------
 457  *  LCD Controller
 458  * -------------------------------------------------------------------- */
 459
 460 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 461 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
 462 static struct atmel_lcdfb_info lcdc_data;
 463
 464 static struct resource lcdc_resources[] = {
 465         [0] = {
 466                 .start  = AT91SAM9261_LCDC_BASE,
 467                 .end    = AT91SAM9261_LCDC_BASE + SZ_4K - 1,
 468                 .flags  = IORESOURCE_MEM,
 469         },
 470         [1] = {
 471                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC,
 472                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC,
 473                 .flags  = IORESOURCE_IRQ,
 474         },
 475 #if defined(CONFIG_FB_INTSRAM)
 476         [2] = {
 477                 .start  = AT91SAM9261_SRAM_BASE,
 478                 .end    = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
 479                 .flags  = IORESOURCE_MEM,
 480         },
 481 #endif
 482 };
 483
 484 static struct platform_device at91_lcdc_device = {
 485         .name           = "atmel_lcdfb",
 486         .id             = 0,
 487         .dev            = {
 488                                 .dma_mask               = &lcdc_dmamask,
 489                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 490                                 .platform_data          = &lcdc_data,
 491         },
 492         .resource       = lcdc_resources,
 493         .num_resources  = ARRAY_SIZE(lcdc_resources),
 494 };
 495
 496 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 497 {
 498         if (!data) {
 499                 return;
 500         }
 501
 502 #if defined(CONFIG_FB_ATMEL_STN)
 503         at91_set_A_periph(AT91_PIN_PB0, 0);     /* LCDVSYNC */
 504         at91_set_A_periph(AT91_PIN_PB1, 0);     /* LCDHSYNC */
 505         at91_set_A_periph(AT91_PIN_PB2, 0);     /* LCDDOTCK */
 506         at91_set_A_periph(AT91_PIN_PB3, 0);     /* LCDDEN */
 507         at91_set_A_periph(AT91_PIN_PB4, 0);     /* LCDCC */
 508         at91_set_A_periph(AT91_PIN_PB5, 0);     /* LCDD0 */
 509         at91_set_A_periph(AT91_PIN_PB6, 0);     /* LCDD1 */
 510         at91_set_A_periph(AT91_PIN_PB7, 0);     /* LCDD2 */
 511         at91_set_A_periph(AT91_PIN_PB8, 0);     /* LCDD3 */
 512 #else
 513         at91_set_A_periph(AT91_PIN_PB1, 0);     /* LCDHSYNC */
 514         at91_set_A_periph(AT91_PIN_PB2, 0);     /* LCDDOTCK */
 515         at91_set_A_periph(AT91_PIN_PB3, 0);     /* LCDDEN */
 516         at91_set_A_periph(AT91_PIN_PB4, 0);     /* LCDCC */
 517         at91_set_A_periph(AT91_PIN_PB7, 0);     /* LCDD2 */
 518         at91_set_A_periph(AT91_PIN_PB8, 0);     /* LCDD3 */
 519         at91_set_A_periph(AT91_PIN_PB9, 0);     /* LCDD4 */
 520         at91_set_A_periph(AT91_PIN_PB10, 0);    /* LCDD5 */
 521         at91_set_A_periph(AT91_PIN_PB11, 0);    /* LCDD6 */
 522         at91_set_A_periph(AT91_PIN_PB12, 0);    /* LCDD7 */
 523         at91_set_A_periph(AT91_PIN_PB15, 0);    /* LCDD10 */
 524         at91_set_A_periph(AT91_PIN_PB16, 0);    /* LCDD11 */
 525         at91_set_A_periph(AT91_PIN_PB17, 0);    /* LCDD12 */
 526         at91_set_A_periph(AT91_PIN_PB18, 0);    /* LCDD13 */
 527         at91_set_A_periph(AT91_PIN_PB19, 0);    /* LCDD14 */
 528         at91_set_A_periph(AT91_PIN_PB20, 0);    /* LCDD15 */
 529         at91_set_B_periph(AT91_PIN_PB23, 0);    /* LCDD18 */
 530         at91_set_B_periph(AT91_PIN_PB24, 0);    /* LCDD19 */
 531         at91_set_B_periph(AT91_PIN_PB25, 0);    /* LCDD20 */
 532         at91_set_B_periph(AT91_PIN_PB26, 0);    /* LCDD21 */
 533         at91_set_B_periph(AT91_PIN_PB27, 0);    /* LCDD22 */
 534         at91_set_B_periph(AT91_PIN_PB28, 0);    /* LCDD23 */
 535 #endif
 536
 537         if (ARRAY_SIZE(lcdc_resources) > 2) {
 538                 void __iomem *fb;
 539                 struct resource *fb_res = &lcdc_resources[2];
 540                 size_t fb_len = resource_size(fb_res);
 541
 542                 fb = ioremap(fb_res->start, fb_len);
 543                 if (fb) {
 544                         memset(fb, 0, fb_len);
 545                         iounmap(fb);
 546                 }
 547         }
 548         lcdc_data = *data;
 549         platform_device_register(&at91_lcdc_device);
 550 }
 551 #else
 552 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
 553 #endif
 554
 555
 556 /* --------------------------------------------------------------------
 557  *  Timer/Counter block
 558  * -------------------------------------------------------------------- */
 559
 560 #ifdef CONFIG_ATMEL_TCLIB
 561
 562 static struct resource tcb_resources[] = {
 563         [0] = {
 564                 .start  = AT91SAM9261_BASE_TCB0,
 565                 .end    = AT91SAM9261_BASE_TCB0 + SZ_16K - 1,
 566                 .flags  = IORESOURCE_MEM,
 567         },
 568         [1] = {
 569                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0,
 570                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0,
 571                 .flags  = IORESOURCE_IRQ,
 572         },
 573         [2] = {
 574                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1,
 575                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1,
 576                 .flags  = IORESOURCE_IRQ,
 577         },
 578         [3] = {
 579                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2,
 580                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2,
 581                 .flags  = IORESOURCE_IRQ,
 582         },
 583 };
 584
 585 static struct platform_device at91sam9261_tcb_device = {
 586         .name           = "atmel_tcb",
 587         .id             = 0,
 588         .resource       = tcb_resources,
 589         .num_resources  = ARRAY_SIZE(tcb_resources),
 590 };
 591
 592 static void __init at91_add_device_tc(void)
 593 {
 594         platform_device_register(&at91sam9261_tcb_device);
 595 }
 596 #else
 597 static void __init at91_add_device_tc(void) { }
 598 #endif
 599
 600
 601 /* --------------------------------------------------------------------
 602  *  RTT
 603  * -------------------------------------------------------------------- */
 604
 605 static struct resource rtt_resources[] = {
 606         {
 607                 .start  = AT91SAM9261_BASE_RTT,
 608                 .end    = AT91SAM9261_BASE_RTT + SZ_16 - 1,
 609                 .flags  = IORESOURCE_MEM,
 610         }, {
 611                 .flags  = IORESOURCE_MEM,
 612         }, {
 613                 .flags  = IORESOURCE_IRQ,
 614         }
 615 };
 616
 617 static struct platform_device at91sam9261_rtt_device = {
 618         .name           = "at91_rtt",
 619         .id             = 0,
 620         .resource       = rtt_resources,
 621 };
 622
 623 #if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
 624 static void __init at91_add_device_rtt_rtc(void)
 625 {
 626         at91sam9261_rtt_device.name = "rtc-at91sam9";
 627         /*
 628          * The second resource is needed:
 629          * GPBR will serve as the storage for RTC time offset
 630          */
 631         at91sam9261_rtt_device.num_resources = 3;
 632         rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
 633                                  4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 634         rtt_resources[1].end = rtt_resources[1].start + 3;
 635         rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
 636         rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 637 }
 638 #else
 639 static void __init at91_add_device_rtt_rtc(void)
 640 {
 641         /* Only one resource is needed: RTT not used as RTC */
 642         at91sam9261_rtt_device.num_resources = 1;
 643 }
 644 #endif
 645
 646 static void __init at91_add_device_rtt(void)
 647 {
 648         at91_add_device_rtt_rtc();
 649         platform_device_register(&at91sam9261_rtt_device);
 650 }
 651
 652
 653 /* --------------------------------------------------------------------
 654  *  Watchdog
 655  * -------------------------------------------------------------------- */
 656
 657 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 658 static struct resource wdt_resources[] = {
 659         {
 660                 .start  = AT91SAM9261_BASE_WDT,
 661                 .end    = AT91SAM9261_BASE_WDT + SZ_16 - 1,
 662                 .flags  = IORESOURCE_MEM,
 663         }
 664 };
 665
 666 static struct platform_device at91sam9261_wdt_device = {
 667         .name           = "at91_wdt",
 668         .id             = -1,
 669         .resource       = wdt_resources,
 670         .num_resources  = ARRAY_SIZE(wdt_resources),
 671 };
 672
 673 static void __init at91_add_device_watchdog(void)
 674 {
 675         platform_device_register(&at91sam9261_wdt_device);
 676 }
 677 #else
 678 static void __init at91_add_device_watchdog(void) {}
 679 #endif
 680
 681
 682 /* --------------------------------------------------------------------
 683  *  SSC -- Synchronous Serial Controller
 684  * -------------------------------------------------------------------- */
 685
 686 #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
 687 static u64 ssc0_dmamask = DMA_BIT_MASK(32);
 688
 689 static struct resource ssc0_resources[] = {
 690         [0] = {
 691                 .start  = AT91SAM9261_BASE_SSC0,
 692                 .end    = AT91SAM9261_BASE_SSC0 + SZ_16K - 1,
 693                 .flags  = IORESOURCE_MEM,
 694         },
 695         [1] = {
 696                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0,
 697                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0,
 698                 .flags  = IORESOURCE_IRQ,
 699         },
 700 };
 701
 702 static struct platform_device at91sam9261_ssc0_device = {
 703         .name   = "ssc",
 704         .id     = 0,
 705         .dev    = {
 706                 .dma_mask               = &ssc0_dmamask,
 707                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 708         },
 709         .resource       = ssc0_resources,
 710         .num_resources  = ARRAY_SIZE(ssc0_resources),
 711 };
 712
 713 static inline void configure_ssc0_pins(unsigned pins)
 714 {
 715         if (pins & ATMEL_SSC_TF)
 716                 at91_set_A_periph(AT91_PIN_PB21, 1);
 717         if (pins & ATMEL_SSC_TK)
 718                 at91_set_A_periph(AT91_PIN_PB22, 1);
 719         if (pins & ATMEL_SSC_TD)
 720                 at91_set_A_periph(AT91_PIN_PB23, 1);
 721         if (pins & ATMEL_SSC_RD)
 722                 at91_set_A_periph(AT91_PIN_PB24, 1);
 723         if (pins & ATMEL_SSC_RK)
 724                 at91_set_A_periph(AT91_PIN_PB25, 1);
 725         if (pins & ATMEL_SSC_RF)
 726                 at91_set_A_periph(AT91_PIN_PB26, 1);
 727 }
 728
 729 static u64 ssc1_dmamask = DMA_BIT_MASK(32);
 730
 731 static struct resource ssc1_resources[] = {
 732         [0] = {
 733                 .start  = AT91SAM9261_BASE_SSC1,
 734                 .end    = AT91SAM9261_BASE_SSC1 + SZ_16K - 1,
 735                 .flags  = IORESOURCE_MEM,
 736         },
 737         [1] = {
 738                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1,
 739                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1,
 740                 .flags  = IORESOURCE_IRQ,
 741         },
 742 };
 743
 744 static struct platform_device at91sam9261_ssc1_device = {
 745         .name   = "ssc",
 746         .id     = 1,
 747         .dev    = {
 748                 .dma_mask               = &ssc1_dmamask,
 749                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 750         },
 751         .resource       = ssc1_resources,
 752         .num_resources  = ARRAY_SIZE(ssc1_resources),
 753 };
 754
 755 static inline void configure_ssc1_pins(unsigned pins)
 756 {
 757         if (pins & ATMEL_SSC_TF)
 758                 at91_set_B_periph(AT91_PIN_PA17, 1);
 759         if (pins & ATMEL_SSC_TK)
 760                 at91_set_B_periph(AT91_PIN_PA18, 1);
 761         if (pins & ATMEL_SSC_TD)
 762                 at91_set_B_periph(AT91_PIN_PA19, 1);
 763         if (pins & ATMEL_SSC_RD)
 764                 at91_set_B_periph(AT91_PIN_PA20, 1);
 765         if (pins & ATMEL_SSC_RK)
 766                 at91_set_B_periph(AT91_PIN_PA21, 1);
 767         if (pins & ATMEL_SSC_RF)
 768                 at91_set_B_periph(AT91_PIN_PA22, 1);
 769 }
 770
 771 static u64 ssc2_dmamask = DMA_BIT_MASK(32);
 772
 773 static struct resource ssc2_resources[] = {
 774         [0] = {
 775                 .start  = AT91SAM9261_BASE_SSC2,
 776                 .end    = AT91SAM9261_BASE_SSC2 + SZ_16K - 1,
 777                 .flags  = IORESOURCE_MEM,
 778         },
 779         [1] = {
 780                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2,
 781                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2,
 782                 .flags  = IORESOURCE_IRQ,
 783         },
 784 };
 785
 786 static struct platform_device at91sam9261_ssc2_device = {
 787         .name   = "ssc",
 788         .id     = 2,
 789         .dev    = {
 790                 .dma_mask               = &ssc2_dmamask,
 791                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 792         },
 793         .resource       = ssc2_resources,
 794         .num_resources  = ARRAY_SIZE(ssc2_resources),
 795 };
 796
 797 static inline void configure_ssc2_pins(unsigned pins)
 798 {
 799         if (pins & ATMEL_SSC_TF)
 800                 at91_set_B_periph(AT91_PIN_PC25, 1);
 801         if (pins & ATMEL_SSC_TK)
 802                 at91_set_B_periph(AT91_PIN_PC26, 1);
 803         if (pins & ATMEL_SSC_TD)
 804                 at91_set_B_periph(AT91_PIN_PC27, 1);
 805         if (pins & ATMEL_SSC_RD)
 806                 at91_set_B_periph(AT91_PIN_PC28, 1);
 807         if (pins & ATMEL_SSC_RK)
 808                 at91_set_B_periph(AT91_PIN_PC29, 1);
 809         if (pins & ATMEL_SSC_RF)
 810                 at91_set_B_periph(AT91_PIN_PC30, 1);
 811 }
 812
 813 /*
 814  * SSC controllers are accessed through library code, instead of any
 815  * kind of all-singing/all-dancing driver.  For example one could be
 816  * used by a particular I2S audio codec's driver, while another one
 817  * on the same system might be used by a custom data capture driver.
 818  */
 819 void __init at91_add_device_ssc(unsigned id, unsigned pins)
 820 {
 821         struct platform_device *pdev;
 822
 823         /*
 824          * NOTE: caller is responsible for passing information matching
 825          * "pins" to whatever will be using each particular controller.
 826          */
 827         switch (id) {
 828         case AT91SAM9261_ID_SSC0:
 829                 pdev = &at91sam9261_ssc0_device;
 830                 configure_ssc0_pins(pins);
 831                 break;
 832         case AT91SAM9261_ID_SSC1:
 833                 pdev = &at91sam9261_ssc1_device;
 834                 configure_ssc1_pins(pins);
 835                 break;
 836         case AT91SAM9261_ID_SSC2:
 837                 pdev = &at91sam9261_ssc2_device;
 838                 configure_ssc2_pins(pins);
 839                 break;
 840         default:
 841                 return;
 842         }
 843
 844         platform_device_register(pdev);
 845 }
 846
 847 #else
 848 void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 849 #endif
 850
 851
 852 /* --------------------------------------------------------------------
 853  *  UART
 854  * -------------------------------------------------------------------- */
 855
 856 #if defined(CONFIG_SERIAL_ATMEL)
 857 static struct resource dbgu_resources[] = {
 858         [0] = {
 859                 .start  = AT91SAM9261_BASE_DBGU,
 860                 .end    = AT91SAM9261_BASE_DBGU + SZ_512 - 1,
 861                 .flags  = IORESOURCE_MEM,
 862         },
 863         [1] = {
 864                 .start  = NR_IRQS_LEGACY + AT91_ID_SYS,
 865                 .end    = NR_IRQS_LEGACY + AT91_ID_SYS,
 866                 .flags  = IORESOURCE_IRQ,
 867         },
 868 };
 869
 870 static struct atmel_uart_data dbgu_data = {
 871         .use_dma_tx     = 0,
 872         .use_dma_rx     = 0,            /* DBGU not capable of receive DMA */
 873 };
 874
 875 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
 876
 877 static struct platform_device at91sam9261_dbgu_device = {
 878         .name           = "atmel_usart",
 879         .id             = 0,
 880         .dev            = {
 881                                 .dma_mask               = &dbgu_dmamask,
 882                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 883                                 .platform_data          = &dbgu_data,
 884         },
 885         .resource       = dbgu_resources,
 886         .num_resources  = ARRAY_SIZE(dbgu_resources),
 887 };
 888
 889 static inline void configure_dbgu_pins(void)
 890 {
 891         at91_set_A_periph(AT91_PIN_PA9, 0);             /* DRXD */
 892         at91_set_A_periph(AT91_PIN_PA10, 1);            /* DTXD */
 893 }
 894
 895 static struct resource uart0_resources[] = {
 896         [0] = {
 897                 .start  = AT91SAM9261_BASE_US0,
 898                 .end    = AT91SAM9261_BASE_US0 + SZ_16K - 1,
 899                 .flags  = IORESOURCE_MEM,
 900         },
 901         [1] = {
 902                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_US0,
 903                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_US0,
 904                 .flags  = IORESOURCE_IRQ,
 905         },
 906 };
 907
 908 static struct atmel_uart_data uart0_data = {
 909         .use_dma_tx     = 1,
 910         .use_dma_rx     = 1,
 911 };
 912
 913 static u64 uart0_dmamask = DMA_BIT_MASK(32);
 914
 915 static struct platform_device at91sam9261_uart0_device = {
 916         .name           = "atmel_usart",
 917         .id             = 1,
 918         .dev            = {
 919                                 .dma_mask               = &uart0_dmamask,
 920                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 921                                 .platform_data          = &uart0_data,
 922         },
 923         .resource       = uart0_resources,
 924         .num_resources  = ARRAY_SIZE(uart0_resources),
 925 };
 926
 927 static inline void configure_usart0_pins(unsigned pins)
 928 {
 929         at91_set_A_periph(AT91_PIN_PC8, 1);             /* TXD0 */
 930         at91_set_A_periph(AT91_PIN_PC9, 0);             /* RXD0 */
 931
 932         if (pins & ATMEL_UART_RTS)
 933                 at91_set_A_periph(AT91_PIN_PC10, 0);    /* RTS0 */
 934         if (pins & ATMEL_UART_CTS)
 935                 at91_set_A_periph(AT91_PIN_PC11, 0);    /* CTS0 */
 936 }
 937
 938 static struct resource uart1_resources[] = {
 939         [0] = {
 940                 .start  = AT91SAM9261_BASE_US1,
 941                 .end    = AT91SAM9261_BASE_US1 + SZ_16K - 1,
 942                 .flags  = IORESOURCE_MEM,
 943         },
 944         [1] = {
 945                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_US1,
 946                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_US1,
 947                 .flags  = IORESOURCE_IRQ,
 948         },
 949 };
 950
 951 static struct atmel_uart_data uart1_data = {
 952         .use_dma_tx     = 1,
 953         .use_dma_rx     = 1,
 954 };
 955
 956 static u64 uart1_dmamask = DMA_BIT_MASK(32);
 957
 958 static struct platform_device at91sam9261_uart1_device = {
 959         .name           = "atmel_usart",
 960         .id             = 2,
 961         .dev            = {
 962                                 .dma_mask               = &uart1_dmamask,
 963                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 964                                 .platform_data          = &uart1_data,
 965         },
 966         .resource       = uart1_resources,
 967         .num_resources  = ARRAY_SIZE(uart1_resources),
 968 };
 969
 970 static inline void configure_usart1_pins(unsigned pins)
 971 {
 972         at91_set_A_periph(AT91_PIN_PC12, 1);            /* TXD1 */
 973         at91_set_A_periph(AT91_PIN_PC13, 0);            /* RXD1 */
 974
 975         if (pins & ATMEL_UART_RTS)
 976                 at91_set_B_periph(AT91_PIN_PA12, 0);    /* RTS1 */
 977         if (pins & ATMEL_UART_CTS)
 978                 at91_set_B_periph(AT91_PIN_PA13, 0);    /* CTS1 */
 979 }
 980
 981 static struct resource uart2_resources[] = {
 982         [0] = {
 983                 .start  = AT91SAM9261_BASE_US2,
 984                 .end    = AT91SAM9261_BASE_US2 + SZ_16K - 1,
 985                 .flags  = IORESOURCE_MEM,
 986         },
 987         [1] = {
 988                 .start  = NR_IRQS_LEGACY + AT91SAM9261_ID_US2,
 989                 .end    = NR_IRQS_LEGACY + AT91SAM9261_ID_US2,
 990                 .flags  = IORESOURCE_IRQ,
 991         },
 992 };
 993
 994 static struct atmel_uart_data uart2_data = {
 995         .use_dma_tx     = 1,
 996         .use_dma_rx     = 1,
 997 };
 998
 999 static u64 uart2_dmamask = DMA_BIT_MASK(32);
1000
1001 static struct platform_device at91sam9261_uart2_device = {
1002         .name           = "atmel_usart",
1003         .id             = 3,
1004         .dev            = {
1005                                 .dma_mask               = &uart2_dmamask,
1006                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1007                                 .platform_data          = &uart2_data,
1008         },
1009         .resource       = uart2_resources,
1010         .num_resources  = ARRAY_SIZE(uart2_resources),
1011 };
1012
1013 static inline void configure_usart2_pins(unsigned pins)
1014 {
1015         at91_set_A_periph(AT91_PIN_PC15, 0);            /* RXD2 */
1016         at91_set_A_periph(AT91_PIN_PC14, 1);            /* TXD2 */
1017
1018         if (pins & ATMEL_UART_RTS)
1019                 at91_set_B_periph(AT91_PIN_PA15, 0);    /* RTS2*/
1020         if (pins & ATMEL_UART_CTS)
1021                 at91_set_B_periph(AT91_PIN_PA16, 0);    /* CTS2 */
1022 }
1023
1024 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];   /* the UARTs to use */
1025
1026 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
1027 {
1028         struct platform_device *pdev;
1029         struct atmel_uart_data *pdata;
1030
1031         switch (id) {
1032                 case 0:         /* DBGU */
1033                         pdev = &at91sam9261_dbgu_device;
1034                         configure_dbgu_pins();
1035                         break;
1036                 case AT91SAM9261_ID_US0:
1037                         pdev = &at91sam9261_uart0_device;
1038                         configure_usart0_pins(pins);
1039                         break;
1040                 case AT91SAM9261_ID_US1:
1041                         pdev = &at91sam9261_uart1_device;
1042                         configure_usart1_pins(pins);
1043                         break;
1044                 case AT91SAM9261_ID_US2:
1045                         pdev = &at91sam9261_uart2_device;
1046                         configure_usart2_pins(pins);
1047                         break;
1048                 default:
1049                         return;
1050         }
1051         pdata = pdev->dev.platform_data;
1052         pdata->num = portnr;            /* update to mapped ID */
1053
1054         if (portnr < ATMEL_MAX_UART)
1055                 at91_uarts[portnr] = pdev;
1056 }
1057
1058 void __init at91_add_device_serial(void)
1059 {
1060         int i;
1061
1062         for (i = 0; i < ATMEL_MAX_UART; i++) {
1063                 if (at91_uarts[i])
1064                         platform_device_register(at91_uarts[i]);
1065         }
1066 }
1067 #else
1068 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1069 void __init at91_add_device_serial(void) {}
1070 #endif
1071
1072
1073 /* -------------------------------------------------------------------- */
1074
1075 /*
1076  * These devices are always present and don't need any board-specific
1077  * setup.
1078  */
1079 static int __init at91_add_standard_devices(void)
1080 {
1081         at91_add_device_rtt();
1082         at91_add_device_watchdog();
1083         at91_add_device_tc();
1084         return 0;
1085 }
1086
1087 arch_initcall(at91_add_standard_devices);