arch/arm/boot/dts/vexpress-v2m-rs1.dtsi

   1 /*
   2  * ARM Ltd. Versatile Express
   3  *
   4  * Motherboard Express uATX
   5  * V2M-P1
   6  *
   7  * HBI-0190D
   8  *
   9  * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
  10  * Technical Reference Manual)
  11  *
  12  * WARNING! The hardware described in this file is independent from the
  13  * original variant (vexpress-v2m.dtsi), but there is a strong
  14  * correspondence between the two configurations.
  15  *
  16  * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
  17  * CHANGES TO vexpress-v2m.dtsi!
  18  */
  19
  20         motherboard {
  21                 model = "V2M-P1";
  22                 arm,hbi = <0x190>;
  23                 arm,vexpress,site = <0>;
  24                 arm,v2m-memory-map = "rs1";
  25                 compatible = "arm,vexpress,v2m-p1", "simple-bus";
  26                 #address-cells = <2>; /* SMB chipselect number and offset */
  27                 #size-cells = <1>;
  28                 #interrupt-cells = <1>;
  29                 ranges;
  30
  31                 flash@0,00000000 {
  32                         compatible = "arm,vexpress-flash", "cfi-flash";
  33                         reg = <0 0x00000000 0x04000000>,
  34                               <4 0x00000000 0x04000000>;
  35                         bank-width = <4>;
  36                 };
  37
  38                 psram@1,00000000 {
  39                         compatible = "arm,vexpress-psram", "mtd-ram";
  40                         reg = <1 0x00000000 0x02000000>;
  41                         bank-width = <4>;
  42                 };
  43
  44                 vram@2,00000000 {
  45                         compatible = "arm,vexpress-vram";
  46                         reg = <2 0x00000000 0x00800000>;
  47                 };
  48
  49                 ethernet@2,02000000 {
  50                         compatible = "smsc,lan9118", "smsc,lan9115";
  51                         reg = <2 0x02000000 0x10000>;
  52                         interrupts = <15>;
  53                         phy-mode = "mii";
  54                         reg-io-width = <4>;
  55                         smsc,irq-active-high;
  56                         smsc,irq-push-pull;
  57                         vdd33a-supply = <&v2m_fixed_3v3>;
  58                         vddvario-supply = <&v2m_fixed_3v3>;
  59                 };
  60
  61                 usb@2,03000000 {
  62                         compatible = "nxp,usb-isp1761";
  63                         reg = <2 0x03000000 0x20000>;
  64                         interrupts = <16>;
  65                         port1-otg;
  66                 };
  67
  68                 iofpga@3,00000000 {
  69                         compatible = "arm,amba-bus", "simple-bus";
  70                         #address-cells = <1>;
  71                         #size-cells = <1>;
  72                         ranges = <0 3 0 0x200000>;
  73
  74                         v2m_sysreg: sysreg@010000 {
  75                                 compatible = "arm,vexpress-sysreg";
  76                                 reg = <0x010000 0x1000>;
  77
  78                                 v2m_led_gpios: sys_led@08 {
  79                                         compatible = "arm,vexpress-sysreg,sys_led";
  80                                         gpio-controller;
  81                                         #gpio-cells = <2>;
  82                                 };
  83
  84                                 v2m_mmc_gpios: sys_mci@48 {
  85                                         compatible = "arm,vexpress-sysreg,sys_mci";
  86                                         gpio-controller;
  87                                         #gpio-cells = <2>;
  88                                 };
  89
  90                                 v2m_flash_gpios: sys_flash@4c {
  91                                         compatible = "arm,vexpress-sysreg,sys_flash";
  92                                         gpio-controller;
  93                                         #gpio-cells = <2>;
  94                                 };
  95                         };
  96
  97                         v2m_sysctl: sysctl@020000 {
  98                                 compatible = "arm,sp810", "arm,primecell";
  99                                 reg = <0x020000 0x1000>;
 100                                 clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
 101                                 clock-names = "refclk", "timclk", "apb_pclk";
 102                                 #clock-cells = <1>;
 103                                 clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
 104                         };
 105
 106                         /* PCI-E I2C bus */
 107                         v2m_i2c_pcie: i2c@030000 {
 108                                 compatible = "arm,versatile-i2c";
 109                                 reg = <0x030000 0x1000>;
 110
 111                                 #address-cells = <1>;
 112                                 #size-cells = <0>;
 113
 114                                 pcie-switch@60 {
 115                                         compatible = "idt,89hpes32h8";
 116                                         reg = <0x60>;
 117                                 };
 118                         };
 119
 120                         aaci@040000 {
 121                                 compatible = "arm,pl041", "arm,primecell";
 122                                 reg = <0x040000 0x1000>;
 123                                 interrupts = <11>;
 124                                 clocks = <&smbclk>;
 125                                 clock-names = "apb_pclk";
 126                         };
 127
 128                         mmci@050000 {
 129                                 compatible = "arm,pl180", "arm,primecell";
 130                                 reg = <0x050000 0x1000>;
 131                                 interrupts = <9 10>;
 132                                 cd-gpios = <&v2m_mmc_gpios 0 0>;
 133                                 wp-gpios = <&v2m_mmc_gpios 1 0>;
 134                                 max-frequency = <12000000>;
 135                                 vmmc-supply = <&v2m_fixed_3v3>;
 136                                 clocks = <&v2m_clk24mhz>, <&smbclk>;
 137                                 clock-names = "mclk", "apb_pclk";
 138                         };
 139
 140                         kmi@060000 {
 141                                 compatible = "arm,pl050", "arm,primecell";
 142                                 reg = <0x060000 0x1000>;
 143                                 interrupts = <12>;
 144                                 clocks = <&v2m_clk24mhz>, <&smbclk>;
 145                                 clock-names = "KMIREFCLK", "apb_pclk";
 146                         };
 147
 148                         kmi@070000 {
 149                                 compatible = "arm,pl050", "arm,primecell";
 150                                 reg = <0x070000 0x1000>;
 151                                 interrupts = <13>;
 152                                 clocks = <&v2m_clk24mhz>, <&smbclk>;
 153                                 clock-names = "KMIREFCLK", "apb_pclk";
 154                         };
 155
 156                         v2m_serial0: uart@090000 {
 157                                 compatible = "arm,pl011", "arm,primecell";
 158                                 reg = <0x090000 0x1000>;
 159                                 interrupts = <5>;
 160                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 161                                 clock-names = "uartclk", "apb_pclk";
 162                         };
 163
 164                         v2m_serial1: uart@0a0000 {
 165                                 compatible = "arm,pl011", "arm,primecell";
 166                                 reg = <0x0a0000 0x1000>;
 167                                 interrupts = <6>;
 168                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 169                                 clock-names = "uartclk", "apb_pclk";
 170                         };
 171
 172                         v2m_serial2: uart@0b0000 {
 173                                 compatible = "arm,pl011", "arm,primecell";
 174                                 reg = <0x0b0000 0x1000>;
 175                                 interrupts = <7>;
 176                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 177                                 clock-names = "uartclk", "apb_pclk";
 178                         };
 179
 180                         v2m_serial3: uart@0c0000 {
 181                                 compatible = "arm,pl011", "arm,primecell";
 182                                 reg = <0x0c0000 0x1000>;
 183                                 interrupts = <8>;
 184                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 185                                 clock-names = "uartclk", "apb_pclk";
 186                         };
 187
 188                         wdt@0f0000 {
 189                                 compatible = "arm,sp805", "arm,primecell";
 190                                 reg = <0x0f0000 0x1000>;
 191                                 interrupts = <0>;
 192                                 clocks = <&v2m_refclk32khz>, <&smbclk>;
 193                                 clock-names = "wdogclk", "apb_pclk";
 194                         };
 195
 196                         v2m_timer01: timer@110000 {
 197                                 compatible = "arm,sp804", "arm,primecell";
 198                                 reg = <0x110000 0x1000>;
 199                                 interrupts = <2>;
 200                                 clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
 201                                 clock-names = "timclken1", "timclken2", "apb_pclk";
 202                         };
 203
 204                         v2m_timer23: timer@120000 {
 205                                 compatible = "arm,sp804", "arm,primecell";
 206                                 reg = <0x120000 0x1000>;
 207                                 interrupts = <3>;
 208                                 clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
 209                                 clock-names = "timclken1", "timclken2", "apb_pclk";
 210                         };
 211
 212                         /* DVI I2C bus */
 213                         v2m_i2c_dvi: i2c@160000 {
 214                                 compatible = "arm,versatile-i2c";
 215                                 reg = <0x160000 0x1000>;
 216
 217                                 #address-cells = <1>;
 218                                 #size-cells = <0>;
 219
 220                                 dvi-transmitter@39 {
 221                                         compatible = "sil,sii9022-tpi", "sil,sii9022";
 222                                         reg = <0x39>;
 223                                 };
 224
 225                                 dvi-transmitter@60 {
 226                                         compatible = "sil,sii9022-cpi", "sil,sii9022";
 227                                         reg = <0x60>;
 228                                 };
 229                         };
 230
 231                         rtc@170000 {
 232                                 compatible = "arm,pl031", "arm,primecell";
 233                                 reg = <0x170000 0x1000>;
 234                                 interrupts = <4>;
 235                                 clocks = <&smbclk>;
 236                                 clock-names = "apb_pclk";
 237                         };
 238
 239                         compact-flash@1a0000 {
 240                                 compatible = "arm,vexpress-cf", "ata-generic";
 241                                 reg = <0x1a0000 0x100
 242                                        0x1a0100 0xf00>;
 243                                 reg-shift = <2>;
 244                         };
 245
 246                         clcd@1f0000 {
 247                                 compatible = "arm,pl111", "arm,primecell";
 248                                 reg = <0x1f0000 0x1000>;
 249                                 interrupts = <14>;
 250                                 clocks = <&v2m_oscclk1>, <&smbclk>;
 251                                 clock-names = "clcdclk", "apb_pclk";
 252                         };
 253                 };
 254
 255                 v2m_fixed_3v3: fixedregulator@0 {
 256                         compatible = "regulator-fixed";
 257                         regulator-name = "3V3";
 258                         regulator-min-microvolt = <3300000>;
 259                         regulator-max-microvolt = <3300000>;
 260                         regulator-always-on;
 261                 };
 262
 263                 v2m_clk24mhz: clk24mhz {
 264                         compatible = "fixed-clock";
 265                         #clock-cells = <0>;
 266                         clock-frequency = <24000000>;
 267                         clock-output-names = "v2m:clk24mhz";
 268                 };
 269
 270                 v2m_refclk1mhz: refclk1mhz {
 271                         compatible = "fixed-clock";
 272                         #clock-cells = <0>;
 273                         clock-frequency = <1000000>;
 274                         clock-output-names = "v2m:refclk1mhz";
 275                 };
 276
 277                 v2m_refclk32khz: refclk32khz {
 278                         compatible = "fixed-clock";
 279                         #clock-cells = <0>;
 280                         clock-frequency = <32768>;
 281                         clock-output-names = "v2m:refclk32khz";
 282                 };
 283
 284                 leds {
 285                         compatible = "gpio-leds";
 286
 287                         user@1 {
 288                                 label = "v2m:green:user1";
 289                                 gpios = <&v2m_led_gpios 0 0>;
 290                                 linux,default-trigger = "heartbeat";
 291                         };
 292
 293                         user@2 {
 294                                 label = "v2m:green:user2";
 295                                 gpios = <&v2m_led_gpios 1 0>;
 296                                 linux,default-trigger = "mmc0";
 297                         };
 298
 299                         user@3 {
 300                                 label = "v2m:green:user3";
 301                                 gpios = <&v2m_led_gpios 2 0>;
 302                                 linux,default-trigger = "cpu0";
 303                         };
 304
 305                         user@4 {
 306                                 label = "v2m:green:user4";
 307                                 gpios = <&v2m_led_gpios 3 0>;
 308                                 linux,default-trigger = "cpu1";
 309                         };
 310
 311                         user@5 {
 312                                 label = "v2m:green:user5";
 313                                 gpios = <&v2m_led_gpios 4 0>;
 314                                 linux,default-trigger = "cpu2";
 315                         };
 316
 317                         user@6 {
 318                                 label = "v2m:green:user6";
 319                                 gpios = <&v2m_led_gpios 5 0>;
 320                                 linux,default-trigger = "cpu3";
 321                         };
 322
 323                         user@7 {
 324                                 label = "v2m:green:user7";
 325                                 gpios = <&v2m_led_gpios 6 0>;
 326                                 linux,default-trigger = "cpu4";
 327                         };
 328
 329                         user@8 {
 330                                 label = "v2m:green:user8";
 331                                 gpios = <&v2m_led_gpios 7 0>;
 332                                 linux,default-trigger = "cpu5";
 333                         };
 334                 };
 335
 336                 mcc {
 337                         compatible = "arm,vexpress,config-bus";
 338                         arm,vexpress,config-bridge = <&v2m_sysreg>;
 339
 340                         osc@0 {
 341                                 /* MCC static memory clock */
 342                                 compatible = "arm,vexpress-osc";
 343                                 arm,vexpress-sysreg,func = <1 0>;
 344                                 freq-range = <25000000 60000000>;
 345                                 #clock-cells = <0>;
 346                                 clock-output-names = "v2m:oscclk0";
 347                         };
 348
 349                         v2m_oscclk1: osc@1 {
 350                                 /* CLCD clock */
 351                                 compatible = "arm,vexpress-osc";
 352                                 arm,vexpress-sysreg,func = <1 1>;
 353                                 freq-range = <23750000 63500000>;
 354                                 #clock-cells = <0>;
 355                                 clock-output-names = "v2m:oscclk1";
 356                         };
 357
 358                         v2m_oscclk2: osc@2 {
 359                                 /* IO FPGA peripheral clock */
 360                                 compatible = "arm,vexpress-osc";
 361                                 arm,vexpress-sysreg,func = <1 2>;
 362                                 freq-range = <24000000 24000000>;
 363                                 #clock-cells = <0>;
 364                                 clock-output-names = "v2m:oscclk2";
 365                         };
 366
 367                         volt@0 {
 368                                 /* Logic level voltage */
 369                                 compatible = "arm,vexpress-volt";
 370                                 arm,vexpress-sysreg,func = <2 0>;
 371                                 regulator-name = "VIO";
 372                                 regulator-always-on;
 373                                 label = "VIO";
 374                         };
 375
 376                         temp@0 {
 377                                 /* MCC internal operating temperature */
 378                                 compatible = "arm,vexpress-temp";
 379                                 arm,vexpress-sysreg,func = <4 0>;
 380                                 label = "MCC";
 381                         };
 382
 383                         reset@0 {
 384                                 compatible = "arm,vexpress-reset";
 385                                 arm,vexpress-sysreg,func = <5 0>;
 386                         };
 387
 388                         muxfpga@0 {
 389                                 compatible = "arm,vexpress-muxfpga";
 390                                 arm,vexpress-sysreg,func = <7 0>;
 391                         };
 392
 393                         shutdown@0 {
 394                                 compatible = "arm,vexpress-shutdown";
 395                                 arm,vexpress-sysreg,func = <8 0>;
 396                         };
 397
 398                         reboot@0 {
 399                                 compatible = "arm,vexpress-reboot";
 400                                 arm,vexpress-sysreg,func = <9 0>;
 401                         };
 402
 403                         dvimode@0 {
 404                                 compatible = "arm,vexpress-dvimode";
 405                                 arm,vexpress-sysreg,func = <11 0>;
 406                         };
 407                 };
 408         };