2 * Copyright 2011 ST-Ericsson AB
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
13 #include "ste-dbx5x0.dtsi"
14 #include "ste-href-ab8500.dtsi"
15 #include "ste-href-family-pinctrl.dtsi"
18 model = "Calao Systems Snowball platform with device tree";
19 compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
22 reg = <0x00000000 0x20000000>;
26 compatible = "regulator-fixed";
27 regulator-name = "en-3v3-fixed-supply";
28 regulator-min-microvolt = <3300000>;
29 regulator-max-microvolt = <3300000>;
30 /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
31 gpio = <&ab8500_gpio 25 0x4>;
32 startup-delay-us = <5000>;
37 compatible = "gpio-keys";
42 debounce_interval = <50>;
46 gpios = <&gpio1 0 0x4>;
49 debounce_interval = <50>;
53 gpios = <&gpio4 23 0x4>;
56 debounce_interval = <50>;
60 gpios = <&gpio4 24 0x4>;
63 debounce_interval = <50>;
67 gpios = <&gpio5 1 0x4>;
70 debounce_interval = <50>;
74 gpios = <&gpio5 2 0x4>;
79 compatible = "gpio-leds";
80 pinctrl-names = "default";
81 pinctrl-0 = <&gpioled_snowball_mode>;
84 gpios = <&gpio4 14 0x4>;
86 linux,default-trigger = "heartbeat";
92 pinctrl-names = "default", "sleep";
93 pinctrl-0 = <&musb_default_mode>;
94 pinctrl-1 = <&musb_sleep_mode>;
98 compatible = "stericsson,snd-soc-mop500";
100 stericsson,cpu-dai = <&msp1 &msp3>;
101 stericsson,audio-codec = <&codec>;
105 pinctrl-names = "default";
106 pinctrl-0 = <&msp0_default_mode>;
111 pinctrl-names = "default";
112 pinctrl-0 = <&msp1_default_mode>;
117 pinctrl-names = "default";
118 pinctrl-0 = <&msp2_default_mode>;
126 external-bus@50000000 {
130 compatible = "smsc,lan9115";
132 interrupts = <12 IRQ_TYPE_EDGE_RISING>;
133 interrupt-parent = <&gpio4>;
134 vdd33a-supply = <&en_3v3_reg>;
135 vddvario-supply = <&db8500_vape_reg>;
136 pinctrl-names = "default";
137 pinctrl-0 = <ð_snowball_mode>;
141 smsc,force-internal-phy;
142 smsc,irq-active-high;
145 clocks = <&prcc_pclk 3 0>;
149 vmmci: regulator-gpio {
150 gpios = <&gpio7 4 0x4>;
151 enable-gpio = <&gpio6 25 0x4>;
154 // External Micro SD slot
156 arm,primecell-periphid = <0x10480180>;
157 max-frequency = <100000000>;
160 vmmc-supply = <&ab8500_ldo_aux3_reg>;
161 vqmmc-supply = <&vmmci>;
162 pinctrl-names = "default", "sleep";
163 pinctrl-0 = <&sdi0_default_mode>;
164 pinctrl-1 = <&sdi0_sleep_mode>;
166 cd-gpios = <&gpio6 26 0x4>; // 218
174 arm,primecell-periphid = <0x10480180>;
175 max-frequency = <100000000>;
177 pinctrl-names = "default", "sleep";
178 pinctrl-0 = <&sdi1_default_mode>;
179 pinctrl-1 = <&sdi1_sleep_mode>;
184 // Unused PoP eMMC - register and put it to sleep by default */
186 arm,primecell-periphid = <0x10480180>;
187 pinctrl-names = "default";
188 pinctrl-0 = <&sdi2_sleep_mode>;
195 arm,primecell-periphid = <0x10480180>;
196 max-frequency = <100000000>;
199 vmmc-supply = <&ab8500_ldo_aux2_reg>;
200 pinctrl-names = "default", "sleep";
201 pinctrl-0 = <&sdi4_default_mode>;
202 pinctrl-1 = <&sdi4_sleep_mode>;
208 pinctrl-names = "default", "sleep";
209 pinctrl-0 = <&uart0_default_mode>;
210 pinctrl-1 = <&uart0_sleep_mode>;
215 pinctrl-names = "default", "sleep";
216 pinctrl-0 = <&uart1_default_mode>;
217 pinctrl-1 = <&uart1_sleep_mode>;
222 pinctrl-names = "default", "sleep";
223 pinctrl-0 = <&uart2_default_mode>;
224 pinctrl-1 = <&uart2_sleep_mode>;
229 pinctrl-names = "default","sleep";
230 pinctrl-0 = <&i2c0_default_mode>;
231 pinctrl-1 = <&i2c0_sleep_mode>;
235 pinctrl-names = "default","sleep";
236 pinctrl-0 = <&i2c1_default_mode>;
237 pinctrl-1 = <&i2c1_sleep_mode>;
241 pinctrl-names = "default","sleep";
242 pinctrl-0 = <&i2c2_default_mode>;
243 pinctrl-1 = <&i2c2_sleep_mode>;
246 compatible = "st,lsm303dlh-accel";
247 st,drdy-int-pin = <1>;
249 vdd-supply = <&ab8500_ldo_aux1_reg>;
250 vddio-supply = <&db8500_vsmps2_reg>;
251 pinctrl-names = "default";
252 pinctrl-0 = <&accel_snowball_mode>;
256 compatible = "st,lsm303dlm-magn";
258 vdd-supply = <&ab8500_ldo_aux1_reg>;
259 vddio-supply = <&db8500_vsmps2_reg>;
260 pinctrl-names = "default";
261 pinctrl-0 = <&magneto_snowball_mode>;
265 compatible = "st,l3g4200d-gyro";
266 st,drdy-int-pin = <2>;
268 vdd-supply = <&ab8500_ldo_aux1_reg>;
269 vddio-supply = <&db8500_vsmps2_reg>;
272 /* Barometer/pressure sensor */
273 compatible = "st,lps001wp-press";
275 vdd-supply = <&ab8500_ldo_aux1_reg>;
276 vddio-supply = <&db8500_vsmps2_reg>;
281 pinctrl-names = "default","sleep";
282 pinctrl-0 = <&i2c3_default_mode>;
283 pinctrl-1 = <&i2c3_sleep_mode>;
287 pinctrl-names = "default";
288 pinctrl-0 = <&ssp0_snowball_mode>;
303 trip0-temp = <70000>;
304 trip0-type = "active";
305 trip0-cdev-num = <1>;
306 trip0-cdev-name0 = "thermal-cpufreq-0";
308 trip1-temp = <75000>;
309 trip1-type = "active";
310 trip1-cdev-num = <1>;
311 trip1-cdev-name0 = "thermal-cpufreq-0";
313 trip2-temp = <80000>;
314 trip2-type = "active";
315 trip2-cdev-num = <1>;
316 trip2-cdev-name0 = "thermal-cpufreq-0";
318 trip3-temp = <85000>;
319 trip3-type = "critical";
320 trip3-cdev-num = <0>;
327 compatible = "stericsson,ab8500-gpio";
330 ext_regulators: ab8500-ext-regulators {
331 ab8500_ext1_reg: ab8500_ext1 {
332 regulator-name = "ab8500-ext-supply1";
335 ab8500_ext2_reg_reg: ab8500_ext2 {
336 regulator-name = "ab8500-ext-supply2";
339 ab8500_ext3_reg_reg: ab8500_ext3 {
340 regulator-name = "ab8500-ext-supply3";
345 ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
346 regulator-name = "V-DISPLAY";
349 ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
350 regulator-name = "V-eMMC1";
353 ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
354 regulator-name = "V-MMC-SD";
357 ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
358 regulator-name = "V-INTCORE";
361 ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
362 regulator-name = "V-TVOUT";
365 ab8500_ldo_usb_reg: ab8500_ldo_usb {
366 regulator-name = "dummy";
369 ab8500_ldo_audio_reg: ab8500_ldo_audio {
370 regulator-name = "V-AUD";
373 ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
374 regulator-name = "V-AMIC1";
377 ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
378 regulator-name = "V-AMIC2";
381 ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
382 regulator-name = "V-DMIC";
385 ab8500_ldo_ana_reg: ab8500_ldo_ana {
386 regulator-name = "V-CSI/DSI";
394 * Set this up using hogs, as time goes by and as seems fit, these
395 * can be moved over to being controlled by respective device.
397 pinctrl-names = "default";
398 pinctrl-0 = <&gbf_snowball_mode>,
399 <&wlan_snowball_mode>;
403 * Mux in "SM" which is used for the
404 * SMSC911x Ethernet adapter
406 eth_snowball_mode: eth_snowball {
413 ste,pins = "GPIO140_B11";
414 ste,config = <&in_nopull>;
418 ste,pins = "GPIO141_C12";
419 ste,config = <&gpio_out_hi>;
425 sdi0_default_mode: sdi0_default {
427 ste,function = "mc0";
428 ste,pins = "mc0dat31dir_a_1";
431 ste,pins = "GPIO21_AB3"; /* DAT31DIR */
432 ste,config = <&out_hi>;
438 ssp0_snowball_mode: ssp0_snowball_default {
440 ste,function = "ssp0";
441 ste,pins = "ssp0_a_1";
444 ste,pins = "GPIO144_B13"; /* FRM */
445 ste,config = <&gpio_out_hi>;
448 ste,pins = "GPIO145_C13"; /* RXD */
449 ste,config = <&in_pd>;
453 "GPIO146_D13", /* TXD */
454 "GPIO143_D12"; /* CLK */
455 ste,config = <&out_lo>;
461 gpioled_snowball_mode: gpioled_default {
463 ste,pins = "GPIO142_C11";
464 ste,config = <&gpio_out_hi>;
470 accel_snowball_mode: accel_snowball {
471 /* Accelerometer lines */
474 "GPIO163_C20", /* ACCEL_IRQ1 */
475 "GPIO164_B21"; /* ACCEL_IRQ2 */
476 ste,config = <&gpio_in_pu>;
481 magneto_snowball_mode: magneto_snowball {
483 ste,pins = "GPIO165_C21"; /* MAG_DRDY */
484 ste,config = <&gpio_in_pu>;
489 gbf_snowball_mode: gbf_snowball {
491 * GBF (GPS, Bluetooth, FM-radio) interface,
492 * pull low to reset state
495 ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
496 ste,config = <&gpio_out_lo>;
501 wlan_snowball_mode: wlan_snowball {
503 * Activate this mode with the WLAN chip.
504 * These are plain GPIO pins used by WLAN
508 "GPIO161_D21", /* WLAN_PMU_EN */
509 "GPIO215_AH13"; /* WLAN_ENA */
510 ste,config = <&gpio_out_lo>;
513 ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */
514 ste,config = <&gpio_in_pu>;
521 pinctrl-names = "default", "sleep";
522 pinctrl-0 = <&lcd_default_mode>;
523 pinctrl-1 = <&lcd_sleep_mode>;