Merge branch 'x15-audio-fixes' into omap-for-v4.4/fixes
[firefly-linux-kernel-4.4.55.git] / arch / arm / boot / dts / sama5d3.dtsi
1 /*
2  * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
3  *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
4  *
5  *  Copyright (C) 2013 Atmel,
6  *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
7  *
8  * Licensed under GPLv2 or later.
9  */
10
11 #include "skeleton.dtsi"
12 #include <dt-bindings/dma/at91.h>
13 #include <dt-bindings/pinctrl/at91.h>
14 #include <dt-bindings/interrupt-controller/irq.h>
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/clock/at91.h>
17
18 / {
19         model = "Atmel SAMA5D3 family SoC";
20         compatible = "atmel,sama5d3", "atmel,sama5";
21         interrupt-parent = <&aic>;
22
23         aliases {
24                 serial0 = &dbgu;
25                 serial1 = &usart0;
26                 serial2 = &usart1;
27                 serial3 = &usart2;
28                 serial4 = &usart3;
29                 serial5 = &uart0;
30                 gpio0 = &pioA;
31                 gpio1 = &pioB;
32                 gpio2 = &pioC;
33                 gpio3 = &pioD;
34                 gpio4 = &pioE;
35                 tcb0 = &tcb0;
36                 i2c0 = &i2c0;
37                 i2c1 = &i2c1;
38                 i2c2 = &i2c2;
39                 ssc0 = &ssc0;
40                 ssc1 = &ssc1;
41                 pwm0 = &pwm0;
42         };
43         cpus {
44                 #address-cells = <1>;
45                 #size-cells = <0>;
46                 cpu@0 {
47                         device_type = "cpu";
48                         compatible = "arm,cortex-a5";
49                         reg = <0x0>;
50                 };
51         };
52
53         pmu {
54                 compatible = "arm,cortex-a5-pmu";
55                 interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
56         };
57
58         memory {
59                 reg = <0x20000000 0x8000000>;
60         };
61
62         clocks {
63                 slow_xtal: slow_xtal {
64                         compatible = "fixed-clock";
65                         #clock-cells = <0>;
66                         clock-frequency = <0>;
67                 };
68
69                 main_xtal: main_xtal {
70                         compatible = "fixed-clock";
71                         #clock-cells = <0>;
72                         clock-frequency = <0>;
73                 };
74
75                 adc_op_clk: adc_op_clk{
76                         compatible = "fixed-clock";
77                         #clock-cells = <0>;
78                         clock-frequency = <1000000>;
79                 };
80         };
81
82         sram: sram@00300000 {
83                 compatible = "mmio-sram";
84                 reg = <0x00300000 0x20000>;
85         };
86
87         ahb {
88                 compatible = "simple-bus";
89                 #address-cells = <1>;
90                 #size-cells = <1>;
91                 ranges;
92
93                 apb {
94                         compatible = "simple-bus";
95                         #address-cells = <1>;
96                         #size-cells = <1>;
97                         ranges;
98
99                         mmc0: mmc@f0000000 {
100                                 compatible = "atmel,hsmci";
101                                 reg = <0xf0000000 0x600>;
102                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
103                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
104                                 dma-names = "rxtx";
105                                 pinctrl-names = "default";
106                                 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
107                                 status = "disabled";
108                                 #address-cells = <1>;
109                                 #size-cells = <0>;
110                                 clocks = <&mci0_clk>;
111                                 clock-names = "mci_clk";
112                         };
113
114                         spi0: spi@f0004000 {
115                                 #address-cells = <1>;
116                                 #size-cells = <0>;
117                                 compatible = "atmel,at91rm9200-spi";
118                                 reg = <0xf0004000 0x100>;
119                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
120                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
121                                        <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
122                                 dma-names = "tx", "rx";
123                                 pinctrl-names = "default";
124                                 pinctrl-0 = <&pinctrl_spi0>;
125                                 clocks = <&spi0_clk>;
126                                 clock-names = "spi_clk";
127                                 status = "disabled";
128                         };
129
130                         ssc0: ssc@f0008000 {
131                                 compatible = "atmel,at91sam9g45-ssc";
132                                 reg = <0xf0008000 0x4000>;
133                                 interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
134                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
135                                        <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
136                                 dma-names = "tx", "rx";
137                                 pinctrl-names = "default";
138                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
139                                 clocks = <&ssc0_clk>;
140                                 clock-names = "pclk";
141                                 status = "disabled";
142                         };
143
144                         tcb0: timer@f0010000 {
145                                 compatible = "atmel,at91sam9x5-tcb";
146                                 reg = <0xf0010000 0x100>;
147                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
148                                 clocks = <&tcb0_clk>, <&clk32k>;
149                                 clock-names = "t0_clk", "slow_clk";
150                         };
151
152                         i2c0: i2c@f0014000 {
153                                 compatible = "atmel,at91sam9x5-i2c";
154                                 reg = <0xf0014000 0x4000>;
155                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
156                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
157                                        <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
158                                 dma-names = "tx", "rx";
159                                 pinctrl-names = "default";
160                                 pinctrl-0 = <&pinctrl_i2c0>;
161                                 #address-cells = <1>;
162                                 #size-cells = <0>;
163                                 clocks = <&twi0_clk>;
164                                 status = "disabled";
165                         };
166
167                         i2c1: i2c@f0018000 {
168                                 compatible = "atmel,at91sam9x5-i2c";
169                                 reg = <0xf0018000 0x4000>;
170                                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
171                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
172                                        <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
173                                 dma-names = "tx", "rx";
174                                 pinctrl-names = "default";
175                                 pinctrl-0 = <&pinctrl_i2c1>;
176                                 #address-cells = <1>;
177                                 #size-cells = <0>;
178                                 clocks = <&twi1_clk>;
179                                 status = "disabled";
180                         };
181
182                         usart0: serial@f001c000 {
183                                 compatible = "atmel,at91sam9260-usart";
184                                 reg = <0xf001c000 0x100>;
185                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
186                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
187                                        <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
188                                 dma-names = "tx", "rx";
189                                 pinctrl-names = "default";
190                                 pinctrl-0 = <&pinctrl_usart0>;
191                                 clocks = <&usart0_clk>;
192                                 clock-names = "usart";
193                                 status = "disabled";
194                         };
195
196                         usart1: serial@f0020000 {
197                                 compatible = "atmel,at91sam9260-usart";
198                                 reg = <0xf0020000 0x100>;
199                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
200                                 dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
201                                        <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
202                                 dma-names = "tx", "rx";
203                                 pinctrl-names = "default";
204                                 pinctrl-0 = <&pinctrl_usart1>;
205                                 clocks = <&usart1_clk>;
206                                 clock-names = "usart";
207                                 status = "disabled";
208                         };
209
210                         uart0: serial@f0024000 {
211                                 compatible = "atmel,at91sam9260-usart";
212                                 reg = <0xf0024000 0x100>;
213                                 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
214                                 pinctrl-names = "default";
215                                 pinctrl-0 = <&pinctrl_uart0>;
216                                 clocks = <&uart0_clk>;
217                                 clock-names = "usart";
218                                 status = "disabled";
219                         };
220
221                         pwm0: pwm@f002c000 {
222                                 compatible = "atmel,sama5d3-pwm";
223                                 reg = <0xf002c000 0x300>;
224                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
225                                 #pwm-cells = <3>;
226                                 clocks = <&pwm_clk>;
227                                 status = "disabled";
228                         };
229
230                         isi: isi@f0034000 {
231                                 compatible = "atmel,at91sam9g45-isi";
232                                 reg = <0xf0034000 0x4000>;
233                                 interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
234                                 pinctrl-names = "default";
235                                 pinctrl-0 = <&pinctrl_isi_data_0_7>;
236                                 clocks = <&isi_clk>;
237                                 clock-names = "isi_clk";
238                                 status = "disabled";
239                                 port {
240                                         #address-cells = <1>;
241                                         #size-cells = <0>;
242                                 };
243                         };
244
245                         sfr: sfr@f0038000 {
246                                 compatible = "atmel,sama5d3-sfr", "syscon";
247                                 reg = <0xf0038000 0x60>;
248                         };
249
250                         mmc1: mmc@f8000000 {
251                                 compatible = "atmel,hsmci";
252                                 reg = <0xf8000000 0x600>;
253                                 interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
254                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
255                                 dma-names = "rxtx";
256                                 pinctrl-names = "default";
257                                 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
258                                 status = "disabled";
259                                 #address-cells = <1>;
260                                 #size-cells = <0>;
261                                 clocks = <&mci1_clk>;
262                                 clock-names = "mci_clk";
263                         };
264
265                         spi1: spi@f8008000 {
266                                 #address-cells = <1>;
267                                 #size-cells = <0>;
268                                 compatible = "atmel,at91rm9200-spi";
269                                 reg = <0xf8008000 0x100>;
270                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
271                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
272                                        <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
273                                 dma-names = "tx", "rx";
274                                 pinctrl-names = "default";
275                                 pinctrl-0 = <&pinctrl_spi1>;
276                                 clocks = <&spi1_clk>;
277                                 clock-names = "spi_clk";
278                                 status = "disabled";
279                         };
280
281                         ssc1: ssc@f800c000 {
282                                 compatible = "atmel,at91sam9g45-ssc";
283                                 reg = <0xf800c000 0x4000>;
284                                 interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
285                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
286                                        <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
287                                 dma-names = "tx", "rx";
288                                 pinctrl-names = "default";
289                                 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
290                                 clocks = <&ssc1_clk>;
291                                 clock-names = "pclk";
292                                 status = "disabled";
293                         };
294
295                         adc0: adc@f8018000 {
296                                 #address-cells = <1>;
297                                 #size-cells = <0>;
298                                 compatible = "atmel,at91sam9x5-adc";
299                                 reg = <0xf8018000 0x100>;
300                                 interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
301                                 pinctrl-names = "default";
302                                 pinctrl-0 = <
303                                         &pinctrl_adc0_adtrg
304                                         &pinctrl_adc0_ad0
305                                         &pinctrl_adc0_ad1
306                                         &pinctrl_adc0_ad2
307                                         &pinctrl_adc0_ad3
308                                         &pinctrl_adc0_ad4
309                                         &pinctrl_adc0_ad5
310                                         &pinctrl_adc0_ad6
311                                         &pinctrl_adc0_ad7
312                                         &pinctrl_adc0_ad8
313                                         &pinctrl_adc0_ad9
314                                         &pinctrl_adc0_ad10
315                                         &pinctrl_adc0_ad11
316                                         >;
317                                 clocks = <&adc_clk>,
318                                          <&adc_op_clk>;
319                                 clock-names = "adc_clk", "adc_op_clk";
320                                 atmel,adc-channels-used = <0xfff>;
321                                 atmel,adc-startup-time = <40>;
322                                 atmel,adc-use-external-triggers;
323                                 atmel,adc-vref = <3000>;
324                                 atmel,adc-res = <10 12>;
325                                 atmel,adc-sample-hold-time = <11>;
326                                 atmel,adc-res-names = "lowres", "highres";
327                                 status = "disabled";
328
329                                 trigger@0 {
330                                         reg = <0>;
331                                         trigger-name = "external-rising";
332                                         trigger-value = <0x1>;
333                                         trigger-external;
334                                 };
335                                 trigger@1 {
336                                         reg = <1>;
337                                         trigger-name = "external-falling";
338                                         trigger-value = <0x2>;
339                                         trigger-external;
340                                 };
341                                 trigger@2 {
342                                         reg = <2>;
343                                         trigger-name = "external-any";
344                                         trigger-value = <0x3>;
345                                         trigger-external;
346                                 };
347                                 trigger@3 {
348                                         reg = <3>;
349                                         trigger-name = "continuous";
350                                         trigger-value = <0x6>;
351                                 };
352                         };
353
354                         i2c2: i2c@f801c000 {
355                                 compatible = "atmel,at91sam9x5-i2c";
356                                 reg = <0xf801c000 0x4000>;
357                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
358                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
359                                        <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
360                                 dma-names = "tx", "rx";
361                                 pinctrl-names = "default";
362                                 pinctrl-0 = <&pinctrl_i2c2>;
363                                 #address-cells = <1>;
364                                 #size-cells = <0>;
365                                 clocks = <&twi2_clk>;
366                                 status = "disabled";
367                         };
368
369                         usart2: serial@f8020000 {
370                                 compatible = "atmel,at91sam9260-usart";
371                                 reg = <0xf8020000 0x100>;
372                                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
373                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
374                                        <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
375                                 dma-names = "tx", "rx";
376                                 pinctrl-names = "default";
377                                 pinctrl-0 = <&pinctrl_usart2>;
378                                 clocks = <&usart2_clk>;
379                                 clock-names = "usart";
380                                 status = "disabled";
381                         };
382
383                         usart3: serial@f8024000 {
384                                 compatible = "atmel,at91sam9260-usart";
385                                 reg = <0xf8024000 0x100>;
386                                 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
387                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
388                                        <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
389                                 dma-names = "tx", "rx";
390                                 pinctrl-names = "default";
391                                 pinctrl-0 = <&pinctrl_usart3>;
392                                 clocks = <&usart3_clk>;
393                                 clock-names = "usart";
394                                 status = "disabled";
395                         };
396
397                         sha@f8034000 {
398                                 compatible = "atmel,at91sam9g46-sha";
399                                 reg = <0xf8034000 0x100>;
400                                 interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
401                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
402                                 dma-names = "tx";
403                                 clocks = <&sha_clk>;
404                                 clock-names = "sha_clk";
405                         };
406
407                         aes@f8038000 {
408                                 compatible = "atmel,at91sam9g46-aes";
409                                 reg = <0xf8038000 0x100>;
410                                 interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
411                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
412                                        <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
413                                 dma-names = "tx", "rx";
414                                 clocks = <&aes_clk>;
415                                 clock-names = "aes_clk";
416                         };
417
418                         tdes@f803c000 {
419                                 compatible = "atmel,at91sam9g46-tdes";
420                                 reg = <0xf803c000 0x100>;
421                                 interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
422                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
423                                        <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
424                                 dma-names = "tx", "rx";
425                                 clocks = <&tdes_clk>;
426                                 clock-names = "tdes_clk";
427                         };
428
429                         dma0: dma-controller@ffffe600 {
430                                 compatible = "atmel,at91sam9g45-dma";
431                                 reg = <0xffffe600 0x200>;
432                                 interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
433                                 #dma-cells = <2>;
434                                 clocks = <&dma0_clk>;
435                                 clock-names = "dma_clk";
436                         };
437
438                         dma1: dma-controller@ffffe800 {
439                                 compatible = "atmel,at91sam9g45-dma";
440                                 reg = <0xffffe800 0x200>;
441                                 interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
442                                 #dma-cells = <2>;
443                                 clocks = <&dma1_clk>;
444                                 clock-names = "dma_clk";
445                         };
446
447                         ramc0: ramc@ffffea00 {
448                                 compatible = "atmel,sama5d3-ddramc";
449                                 reg = <0xffffea00 0x200>;
450                                 clocks = <&ddrck>, <&mpddr_clk>;
451                                 clock-names = "ddrck", "mpddr";
452                         };
453
454                         dbgu: serial@ffffee00 {
455                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
456                                 reg = <0xffffee00 0x200>;
457                                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
458                                 dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
459                                        <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
460                                 dma-names = "tx", "rx";
461                                 pinctrl-names = "default";
462                                 pinctrl-0 = <&pinctrl_dbgu>;
463                                 clocks = <&dbgu_clk>;
464                                 clock-names = "usart";
465                                 status = "disabled";
466                         };
467
468                         aic: interrupt-controller@fffff000 {
469                                 #interrupt-cells = <3>;
470                                 compatible = "atmel,sama5d3-aic";
471                                 interrupt-controller;
472                                 reg = <0xfffff000 0x200>;
473                                 atmel,external-irqs = <47>;
474                         };
475
476                         pinctrl@fffff200 {
477                                 #address-cells = <1>;
478                                 #size-cells = <1>;
479                                 compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
480                                 ranges = <0xfffff200 0xfffff200 0xa00>;
481                                 atmel,mux-mask = <
482                                         /*   A          B          C  */
483                                         0xffffffff 0xc0fc0000 0xc0ff0000        /* pioA */
484                                         0xffffffff 0x0ff8ffff 0x00000000        /* pioB */
485                                         0xffffffff 0xbc00f1ff 0x7c00fc00        /* pioC */
486                                         0xffffffff 0xc001c0e0 0x0001c1e0        /* pioD */
487                                         0xffffffff 0xbf9f8000 0x18000000        /* pioE */
488                                         >;
489
490                                 /* shared pinctrl settings */
491                                 adc0 {
492                                         pinctrl_adc0_adtrg: adc0_adtrg {
493                                                 atmel,pins =
494                                                         <AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD19 periph A ADTRG */
495                                         };
496                                         pinctrl_adc0_ad0: adc0_ad0 {
497                                                 atmel,pins =
498                                                         <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD20 periph A AD0 */
499                                         };
500                                         pinctrl_adc0_ad1: adc0_ad1 {
501                                                 atmel,pins =
502                                                         <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A AD1 */
503                                         };
504                                         pinctrl_adc0_ad2: adc0_ad2 {
505                                                 atmel,pins =
506                                                         <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD22 periph A AD2 */
507                                         };
508                                         pinctrl_adc0_ad3: adc0_ad3 {
509                                                 atmel,pins =
510                                                         <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD23 periph A AD3 */
511                                         };
512                                         pinctrl_adc0_ad4: adc0_ad4 {
513                                                 atmel,pins =
514                                                         <AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD24 periph A AD4 */
515                                         };
516                                         pinctrl_adc0_ad5: adc0_ad5 {
517                                                 atmel,pins =
518                                                         <AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD25 periph A AD5 */
519                                         };
520                                         pinctrl_adc0_ad6: adc0_ad6 {
521                                                 atmel,pins =
522                                                         <AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD26 periph A AD6 */
523                                         };
524                                         pinctrl_adc0_ad7: adc0_ad7 {
525                                                 atmel,pins =
526                                                         <AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD27 periph A AD7 */
527                                         };
528                                         pinctrl_adc0_ad8: adc0_ad8 {
529                                                 atmel,pins =
530                                                         <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD28 periph A AD8 */
531                                         };
532                                         pinctrl_adc0_ad9: adc0_ad9 {
533                                                 atmel,pins =
534                                                         <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD29 periph A AD9 */
535                                         };
536                                         pinctrl_adc0_ad10: adc0_ad10 {
537                                                 atmel,pins =
538                                                         <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */
539                                         };
540                                         pinctrl_adc0_ad11: adc0_ad11 {
541                                                 atmel,pins =
542                                                         <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */
543                                         };
544                                 };
545
546                                 dbgu {
547                                         pinctrl_dbgu: dbgu-0 {
548                                                 atmel,pins =
549                                                         <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB30 periph A */
550                                                          AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PB31 periph A with pullup */
551                                         };
552                                 };
553
554                                 i2c0 {
555                                         pinctrl_i2c0: i2c0-0 {
556                                                 atmel,pins =
557                                                         <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
558                                                          AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
559                                         };
560                                 };
561
562                                 i2c1 {
563                                         pinctrl_i2c1: i2c1-0 {
564                                                 atmel,pins =
565                                                         <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
566                                                          AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
567                                         };
568                                 };
569
570                                 i2c2 {
571                                         pinctrl_i2c2: i2c2-0 {
572                                                 atmel,pins =
573                                                         <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE   /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
574                                                          AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
575                                         };
576                                 };
577
578                                 isi {
579                                         pinctrl_isi_data_0_7: isi-0-data-0-7 {
580                                                 atmel,pins =
581                                                         <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
582                                                          AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
583                                                          AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
584                                                          AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
585                                                          AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
586                                                          AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
587                                                          AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
588                                                          AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
589                                                          AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC30 periph C ISI_PCK, conflicts with UTXD0 */
590                                                          AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
591                                                          AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
592                                         };
593
594                                         pinctrl_isi_data_8_9: isi-0-data-8-9 {
595                                                 atmel,pins =
596                                                         <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
597                                                          AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
598                                         };
599
600                                         pinctrl_isi_data_10_11: isi-0-data-10-11 {
601                                                 atmel,pins =
602                                                         <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
603                                                          AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
604                                         };
605                                 };
606
607                                 mmc0 {
608                                         pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
609                                                 atmel,pins =
610                                                         <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD9 periph A MCI0_CK */
611                                                          AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A MCI0_CDA with pullup */
612                                                          AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PD1 periph A MCI0_DA0 with pullup */
613                                         };
614                                         pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
615                                                 atmel,pins =
616                                                         <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A MCI0_DA1 with pullup */
617                                                          AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A MCI0_DA2 with pullup */
618                                                          AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PD4 periph A MCI0_DA3 with pullup */
619                                         };
620                                         pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
621                                                 atmel,pins =
622                                                         <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
623                                                          AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
624                                                          AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
625                                                          AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
626                                         };
627                                 };
628
629                                 mmc1 {
630                                         pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
631                                                 atmel,pins =
632                                                         <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB24 periph A MCI1_CK, conflicts with GRX5 */
633                                                          AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
634                                                          AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
635                                         };
636                                         pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
637                                                 atmel,pins =
638                                                         <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
639                                                          AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
640                                                          AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
641                                         };
642                                 };
643
644                                 nand0 {
645                                         pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
646                                                 atmel,pins =
647                                                         <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PE21 periph A with pullup */
648                                                          AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PE22 periph A with pullup */
649                                         };
650                                 };
651
652                                 pwm0 {
653                                         pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
654                                                 atmel,pins =
655                                                         <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D4 and LCDDAT20 */
656                                         };
657                                         pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
658                                                 atmel,pins =
659                                                         <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GTX0 */
660                                         };
661                                         pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
662                                                 atmel,pins =
663                                                         <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D5 and LCDDAT21 */
664                                         };
665                                         pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
666                                                 atmel,pins =
667                                                         <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GTX1 */
668                                         };
669
670                                         pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
671                                                 atmel,pins =
672                                                         <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D6 and LCDDAT22 */
673                                         };
674                                         pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
675                                                 atmel,pins =
676                                                         <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GRX0 */
677                                         };
678                                         pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
679                                                 atmel,pins =
680                                                         <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with G125CKO and RTS1 */
681                                         };
682                                         pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
683                                                 atmel,pins =
684                                                         <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D7 and LCDDAT23 */
685                                         };
686                                         pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
687                                                 atmel,pins =
688                                                         <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GRX1 */
689                                         };
690                                         pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
691                                                 atmel,pins =
692                                                         <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with IRQ */
693                                         };
694
695                                         pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
696                                                 atmel,pins =
697                                                         <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GTXCK */
698                                         };
699                                         pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
700                                                 atmel,pins =
701                                                         <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* conflicts with MCI0_DA4 and TIOA0 */
702                                         };
703                                         pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
704                                                 atmel,pins =
705                                                         <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* conflicts with GTXEN */
706                                         };
707                                         pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
708                                                 atmel,pins =
709                                                         <AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* conflicts with MCI0_DA5 and TIOB0 */
710                                         };
711
712                                         pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
713                                                 atmel,pins =
714                                                         <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXDV */
715                                         };
716                                         pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
717                                                 atmel,pins =
718                                                         <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* conflicts with MCI0_DA6 and TCLK0 */
719                                         };
720                                         pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
721                                                 atmel,pins =
722                                                         <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXER */
723                                         };
724                                         pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
725                                                 atmel,pins =
726                                                         <AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* conflicts with MCI0_DA7 */
727                                         };
728                                 };
729
730                                 spi0 {
731                                         pinctrl_spi0: spi0-0 {
732                                                 atmel,pins =
733                                                         <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD10 periph A SPI0_MISO pin */
734                                                          AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD11 periph A SPI0_MOSI pin */
735                                                          AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A SPI0_SPCK pin */
736                                         };
737                                 };
738
739                                 spi1 {
740                                         pinctrl_spi1: spi1-0 {
741                                                 atmel,pins =
742                                                         <AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC22 periph A SPI1_MISO pin */
743                                                          AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC23 periph A SPI1_MOSI pin */
744                                                          AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC24 periph A SPI1_SPCK pin */
745                                         };
746                                 };
747
748                                 ssc0 {
749                                         pinctrl_ssc0_tx: ssc0_tx {
750                                                 atmel,pins =
751                                                         <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC16 periph A TK0 */
752                                                          AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC17 periph A TF0 */
753                                                          AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC18 periph A TD0 */
754                                         };
755
756                                         pinctrl_ssc0_rx: ssc0_rx {
757                                                 atmel,pins =
758                                                         <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC19 periph A RK0 */
759                                                          AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PC20 periph A RF0 */
760                                                          AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC21 periph A RD0 */
761                                         };
762                                 };
763
764                                 ssc1 {
765                                         pinctrl_ssc1_tx: ssc1_tx {
766                                                 atmel,pins =
767                                                         <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB2 periph B TK1, conflicts with GTX2 */
768                                                          AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB3 periph B TF1, conflicts with GTX3 */
769                                                          AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB6 periph B TD1, conflicts with TD1 */
770                                         };
771
772                                         pinctrl_ssc1_rx: ssc1_rx {
773                                                 atmel,pins =
774                                                         <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB7 periph B RK1, conflicts with EREFCK */
775                                                          AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PB10 periph B RF1, conflicts with GTXER */
776                                                          AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB11 periph B RD1, conflicts with GRXCK */
777                                         };
778                                 };
779
780                                 uart0 {
781                                         pinctrl_uart0: uart0-0 {
782                                                 atmel,pins =
783                                                         <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE   /* conflicts with PWMFI2, ISI_D8 */
784                                                          AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* conflicts with ISI_PCK */
785                                         };
786                                 };
787
788                                 uart1 {
789                                         pinctrl_uart1: uart1-0 {
790                                                 atmel,pins =
791                                                         <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE   /* conflicts with TWD0, ISI_VSYNC */
792                                                          AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;      /* conflicts with TWCK0, ISI_HSYNC */
793                                         };
794                                 };
795
796                                 usart0 {
797                                         pinctrl_usart0: usart0-0 {
798                                                 atmel,pins =
799                                                         <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD17 periph A */
800                                                          AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PD18 periph A with pullup */
801                                         };
802
803                                         pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
804                                                 atmel,pins =
805                                                         <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
806                                                          AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
807                                         };
808                                 };
809
810                                 usart1 {
811                                         pinctrl_usart1: usart1-0 {
812                                                 atmel,pins =
813                                                         <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB28 periph A */
814                                                          AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PB29 periph A with pullup */
815                                         };
816
817                                         pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
818                                                 atmel,pins =
819                                                         <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB26 periph A, conflicts with GRX7 */
820                                                          AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A, conflicts with G125CKO */
821                                         };
822                                 };
823
824                                 usart2 {
825                                         pinctrl_usart2: usart2-0 {
826                                                 atmel,pins =
827                                                         <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PE25 periph B, conflicts with A25 */
828                                                          AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;      /* PE26 periph B with pullup, conflicts NCS0 */
829                                         };
830
831                                         pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
832                                                 atmel,pins =
833                                                         <AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PE23 periph B, conflicts with A23 */
834                                                          AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE24 periph B, conflicts with A24 */
835                                         };
836                                 };
837
838                                 usart3 {
839                                         pinctrl_usart3: usart3-0 {
840                                                 atmel,pins =
841                                                         <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PE18 periph B, conflicts with A18 */
842                                                          AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;      /* PE19 periph B with pullup, conflicts with A19 */
843                                         };
844
845                                         pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
846                                                 atmel,pins =
847                                                         <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PE16 periph B, conflicts with A16 */
848                                                          AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE17 periph B, conflicts with A17 */
849                                         };
850                                 };
851
852
853                                 pioA: gpio@fffff200 {
854                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
855                                         reg = <0xfffff200 0x100>;
856                                         interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
857                                         #gpio-cells = <2>;
858                                         gpio-controller;
859                                         interrupt-controller;
860                                         #interrupt-cells = <2>;
861                                         clocks = <&pioA_clk>;
862                                 };
863
864                                 pioB: gpio@fffff400 {
865                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
866                                         reg = <0xfffff400 0x100>;
867                                         interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
868                                         #gpio-cells = <2>;
869                                         gpio-controller;
870                                         interrupt-controller;
871                                         #interrupt-cells = <2>;
872                                         clocks = <&pioB_clk>;
873                                 };
874
875                                 pioC: gpio@fffff600 {
876                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
877                                         reg = <0xfffff600 0x100>;
878                                         interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
879                                         #gpio-cells = <2>;
880                                         gpio-controller;
881                                         interrupt-controller;
882                                         #interrupt-cells = <2>;
883                                         clocks = <&pioC_clk>;
884                                 };
885
886                                 pioD: gpio@fffff800 {
887                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
888                                         reg = <0xfffff800 0x100>;
889                                         interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
890                                         #gpio-cells = <2>;
891                                         gpio-controller;
892                                         interrupt-controller;
893                                         #interrupt-cells = <2>;
894                                         clocks = <&pioD_clk>;
895                                 };
896
897                                 pioE: gpio@fffffa00 {
898                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
899                                         reg = <0xfffffa00 0x100>;
900                                         interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
901                                         #gpio-cells = <2>;
902                                         gpio-controller;
903                                         interrupt-controller;
904                                         #interrupt-cells = <2>;
905                                         clocks = <&pioE_clk>;
906                                 };
907                         };
908
909                         pmc: pmc@fffffc00 {
910                                 compatible = "atmel,sama5d3-pmc", "syscon";
911                                 reg = <0xfffffc00 0x120>;
912                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
913                                 interrupt-controller;
914                                 #address-cells = <1>;
915                                 #size-cells = <0>;
916                                 #interrupt-cells = <1>;
917
918                                 main_rc_osc: main_rc_osc {
919                                         compatible = "atmel,at91sam9x5-clk-main-rc-osc";
920                                         #clock-cells = <0>;
921                                         interrupt-parent = <&pmc>;
922                                         interrupts = <AT91_PMC_MOSCRCS>;
923                                         clock-frequency = <12000000>;
924                                         clock-accuracy = <50000000>;
925                                 };
926
927                                 main_osc: main_osc {
928                                         compatible = "atmel,at91rm9200-clk-main-osc";
929                                         #clock-cells = <0>;
930                                         interrupt-parent = <&pmc>;
931                                         interrupts = <AT91_PMC_MOSCS>;
932                                         clocks = <&main_xtal>;
933                                 };
934
935                                 main: mainck {
936                                         compatible = "atmel,at91sam9x5-clk-main";
937                                         #clock-cells = <0>;
938                                         interrupt-parent = <&pmc>;
939                                         interrupts = <AT91_PMC_MOSCSELS>;
940                                         clocks = <&main_rc_osc &main_osc>;
941                                 };
942
943                                 plla: pllack {
944                                         compatible = "atmel,sama5d3-clk-pll";
945                                         #clock-cells = <0>;
946                                         interrupt-parent = <&pmc>;
947                                         interrupts = <AT91_PMC_LOCKA>;
948                                         clocks = <&main>;
949                                         reg = <0>;
950                                         atmel,clk-input-range = <8000000 50000000>;
951                                         #atmel,pll-clk-output-range-cells = <4>;
952                                         atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>;
953                                 };
954
955                                 plladiv: plladivck {
956                                         compatible = "atmel,at91sam9x5-clk-plldiv";
957                                         #clock-cells = <0>;
958                                         clocks = <&plla>;
959                                 };
960
961                                 utmi: utmick {
962                                         compatible = "atmel,at91sam9x5-clk-utmi";
963                                         #clock-cells = <0>;
964                                         interrupt-parent = <&pmc>;
965                                         interrupts = <AT91_PMC_LOCKU>;
966                                         clocks = <&main>;
967                                 };
968
969                                 mck: masterck {
970                                         compatible = "atmel,at91sam9x5-clk-master";
971                                         #clock-cells = <0>;
972                                         interrupt-parent = <&pmc>;
973                                         interrupts = <AT91_PMC_MCKRDY>;
974                                         clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
975                                         atmel,clk-output-range = <0 166000000>;
976                                         atmel,clk-divisors = <1 2 4 3>;
977                                 };
978
979                                 usb: usbck {
980                                         compatible = "atmel,at91sam9x5-clk-usb";
981                                         #clock-cells = <0>;
982                                         clocks = <&plladiv>, <&utmi>;
983                                 };
984
985                                 prog: progck {
986                                         compatible = "atmel,at91sam9x5-clk-programmable";
987                                         #address-cells = <1>;
988                                         #size-cells = <0>;
989                                         interrupt-parent = <&pmc>;
990                                         clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
991
992                                         prog0: prog0 {
993                                                 #clock-cells = <0>;
994                                                 reg = <0>;
995                                                 interrupts = <AT91_PMC_PCKRDY(0)>;
996                                         };
997
998                                         prog1: prog1 {
999                                                 #clock-cells = <0>;
1000                                                 reg = <1>;
1001                                                 interrupts = <AT91_PMC_PCKRDY(1)>;
1002                                         };
1003
1004                                         prog2: prog2 {
1005                                                 #clock-cells = <0>;
1006                                                 reg = <2>;
1007                                                 interrupts = <AT91_PMC_PCKRDY(2)>;
1008                                         };
1009                                 };
1010
1011                                 smd: smdclk {
1012                                         compatible = "atmel,at91sam9x5-clk-smd";
1013                                         #clock-cells = <0>;
1014                                         clocks = <&plladiv>, <&utmi>;
1015                                 };
1016
1017                                 systemck {
1018                                         compatible = "atmel,at91rm9200-clk-system";
1019                                         #address-cells = <1>;
1020                                         #size-cells = <0>;
1021
1022                                         ddrck: ddrck {
1023                                                 #clock-cells = <0>;
1024                                                 reg = <2>;
1025                                                 clocks = <&mck>;
1026                                         };
1027
1028                                         smdck: smdck {
1029                                                 #clock-cells = <0>;
1030                                                 reg = <4>;
1031                                                 clocks = <&smd>;
1032                                         };
1033
1034                                         uhpck: uhpck {
1035                                                 #clock-cells = <0>;
1036                                                 reg = <6>;
1037                                                 clocks = <&usb>;
1038                                         };
1039
1040                                         udpck: udpck {
1041                                                 #clock-cells = <0>;
1042                                                 reg = <7>;
1043                                                 clocks = <&usb>;
1044                                         };
1045
1046                                         pck0: pck0 {
1047                                                 #clock-cells = <0>;
1048                                                 reg = <8>;
1049                                                 clocks = <&prog0>;
1050                                         };
1051
1052                                         pck1: pck1 {
1053                                                 #clock-cells = <0>;
1054                                                 reg = <9>;
1055                                                 clocks = <&prog1>;
1056                                         };
1057
1058                                         pck2: pck2 {
1059                                                 #clock-cells = <0>;
1060                                                 reg = <10>;
1061                                                 clocks = <&prog2>;
1062                                         };
1063                                 };
1064
1065                                 periphck {
1066                                         compatible = "atmel,at91sam9x5-clk-peripheral";
1067                                         #address-cells = <1>;
1068                                         #size-cells = <0>;
1069                                         clocks = <&mck>;
1070
1071                                         dbgu_clk: dbgu_clk {
1072                                                 #clock-cells = <0>;
1073                                                 reg = <2>;
1074                                         };
1075
1076                                         hsmc_clk: hsmc_clk {
1077                                                 #clock-cells = <0>;
1078                                                 reg = <5>;
1079                                         };
1080
1081                                         pioA_clk: pioA_clk {
1082                                                 #clock-cells = <0>;
1083                                                 reg = <6>;
1084                                         };
1085
1086                                         pioB_clk: pioB_clk {
1087                                                 #clock-cells = <0>;
1088                                                 reg = <7>;
1089                                         };
1090
1091                                         pioC_clk: pioC_clk {
1092                                                 #clock-cells = <0>;
1093                                                 reg = <8>;
1094                                         };
1095
1096                                         pioD_clk: pioD_clk {
1097                                                 #clock-cells = <0>;
1098                                                 reg = <9>;
1099                                         };
1100
1101                                         pioE_clk: pioE_clk {
1102                                                 #clock-cells = <0>;
1103                                                 reg = <10>;
1104                                         };
1105
1106                                         usart0_clk: usart0_clk {
1107                                                 #clock-cells = <0>;
1108                                                 reg = <12>;
1109                                                 atmel,clk-output-range = <0 66000000>;
1110                                         };
1111
1112                                         usart1_clk: usart1_clk {
1113                                                 #clock-cells = <0>;
1114                                                 reg = <13>;
1115                                                 atmel,clk-output-range = <0 66000000>;
1116                                         };
1117
1118                                         usart2_clk: usart2_clk {
1119                                                 #clock-cells = <0>;
1120                                                 reg = <14>;
1121                                                 atmel,clk-output-range = <0 66000000>;
1122                                         };
1123
1124                                         usart3_clk: usart3_clk {
1125                                                 #clock-cells = <0>;
1126                                                 reg = <15>;
1127                                                 atmel,clk-output-range = <0 66000000>;
1128                                         };
1129
1130                                         uart0_clk: uart0_clk {
1131                                                 #clock-cells = <0>;
1132                                                 reg = <16>;
1133                                                 atmel,clk-output-range = <0 66000000>;
1134                                         };
1135
1136                                         twi0_clk: twi0_clk {
1137                                                 reg = <18>;
1138                                                 #clock-cells = <0>;
1139                                                 atmel,clk-output-range = <0 16625000>;
1140                                         };
1141
1142                                         twi1_clk: twi1_clk {
1143                                                 #clock-cells = <0>;
1144                                                 reg = <19>;
1145                                                 atmel,clk-output-range = <0 16625000>;
1146                                         };
1147
1148                                         twi2_clk: twi2_clk {
1149                                                 #clock-cells = <0>;
1150                                                 reg = <20>;
1151                                                 atmel,clk-output-range = <0 16625000>;
1152                                         };
1153
1154                                         mci0_clk: mci0_clk {
1155                                                 #clock-cells = <0>;
1156                                                 reg = <21>;
1157                                         };
1158
1159                                         mci1_clk: mci1_clk {
1160                                                 #clock-cells = <0>;
1161                                                 reg = <22>;
1162                                         };
1163
1164                                         spi0_clk: spi0_clk {
1165                                                 #clock-cells = <0>;
1166                                                 reg = <24>;
1167                                                 atmel,clk-output-range = <0 133000000>;
1168                                         };
1169
1170                                         spi1_clk: spi1_clk {
1171                                                 #clock-cells = <0>;
1172                                                 reg = <25>;
1173                                                 atmel,clk-output-range = <0 133000000>;
1174                                         };
1175
1176                                         tcb0_clk: tcb0_clk {
1177                                                 #clock-cells = <0>;
1178                                                 reg = <26>;
1179                                                 atmel,clk-output-range = <0 133000000>;
1180                                         };
1181
1182                                         pwm_clk: pwm_clk {
1183                                                 #clock-cells = <0>;
1184                                                 reg = <28>;
1185                                         };
1186
1187                                         adc_clk: adc_clk {
1188                                                 #clock-cells = <0>;
1189                                                 reg = <29>;
1190                                                 atmel,clk-output-range = <0 66000000>;
1191                                         };
1192
1193                                         dma0_clk: dma0_clk {
1194                                                 #clock-cells = <0>;
1195                                                 reg = <30>;
1196                                         };
1197
1198                                         dma1_clk: dma1_clk {
1199                                                 #clock-cells = <0>;
1200                                                 reg = <31>;
1201                                         };
1202
1203                                         uhphs_clk: uhphs_clk {
1204                                                 #clock-cells = <0>;
1205                                                 reg = <32>;
1206                                         };
1207
1208                                         udphs_clk: udphs_clk {
1209                                                 #clock-cells = <0>;
1210                                                 reg = <33>;
1211                                         };
1212
1213                                         isi_clk: isi_clk {
1214                                                 #clock-cells = <0>;
1215                                                 reg = <37>;
1216                                         };
1217
1218                                         ssc0_clk: ssc0_clk {
1219                                                 #clock-cells = <0>;
1220                                                 reg = <38>;
1221                                                 atmel,clk-output-range = <0 66000000>;
1222                                         };
1223
1224                                         ssc1_clk: ssc1_clk {
1225                                                 #clock-cells = <0>;
1226                                                 reg = <39>;
1227                                                 atmel,clk-output-range = <0 66000000>;
1228                                         };
1229
1230                                         sha_clk: sha_clk {
1231                                                 #clock-cells = <0>;
1232                                                 reg = <42>;
1233                                         };
1234
1235                                         aes_clk: aes_clk {
1236                                                 #clock-cells = <0>;
1237                                                 reg = <43>;
1238                                         };
1239
1240                                         tdes_clk: tdes_clk {
1241                                                 #clock-cells = <0>;
1242                                                 reg = <44>;
1243                                         };
1244
1245                                         trng_clk: trng_clk {
1246                                                 #clock-cells = <0>;
1247                                                 reg = <45>;
1248                                         };
1249
1250                                         fuse_clk: fuse_clk {
1251                                                 #clock-cells = <0>;
1252                                                 reg = <48>;
1253                                         };
1254
1255                                         mpddr_clk: mpddr_clk {
1256                                                 #clock-cells = <0>;
1257                                                 reg = <49>;
1258                                         };
1259                                 };
1260                         };
1261
1262                         rstc@fffffe00 {
1263                                 compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
1264                                 reg = <0xfffffe00 0x10>;
1265                                 clocks = <&clk32k>;
1266                         };
1267
1268                         shutdown-controller@fffffe10 {
1269                                 compatible = "atmel,at91sam9x5-shdwc";
1270                                 reg = <0xfffffe10 0x10>;
1271                                 clocks = <&clk32k>;
1272                         };
1273
1274                         pit: timer@fffffe30 {
1275                                 compatible = "atmel,at91sam9260-pit";
1276                                 reg = <0xfffffe30 0xf>;
1277                                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
1278                                 clocks = <&mck>;
1279                         };
1280
1281                         watchdog@fffffe40 {
1282                                 compatible = "atmel,at91sam9260-wdt";
1283                                 reg = <0xfffffe40 0x10>;
1284                                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
1285                                 clocks = <&clk32k>;
1286                                 atmel,watchdog-type = "hardware";
1287                                 atmel,reset-type = "all";
1288                                 atmel,dbg-halt;
1289                                 status = "disabled";
1290                         };
1291
1292                         sckc@fffffe50 {
1293                                 compatible = "atmel,at91sam9x5-sckc";
1294                                 reg = <0xfffffe50 0x4>;
1295
1296                                 slow_rc_osc: slow_rc_osc {
1297                                         compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
1298                                         #clock-cells = <0>;
1299                                         clock-frequency = <32768>;
1300                                         clock-accuracy = <50000000>;
1301                                         atmel,startup-time-usec = <75>;
1302                                 };
1303
1304                                 slow_osc: slow_osc {
1305                                         compatible = "atmel,at91sam9x5-clk-slow-osc";
1306                                         #clock-cells = <0>;
1307                                         clocks = <&slow_xtal>;
1308                                         atmel,startup-time-usec = <1200000>;
1309                                 };
1310
1311                                 clk32k: slowck {
1312                                         compatible = "atmel,at91sam9x5-clk-slow";
1313                                         #clock-cells = <0>;
1314                                         clocks = <&slow_rc_osc &slow_osc>;
1315                                 };
1316                         };
1317
1318                         rtc@fffffeb0 {
1319                                 compatible = "atmel,at91rm9200-rtc";
1320                                 reg = <0xfffffeb0 0x30>;
1321                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1322                                 clocks = <&clk32k>;
1323                         };
1324                 };
1325
1326                 usb0: gadget@00500000 {
1327                         #address-cells = <1>;
1328                         #size-cells = <0>;
1329                         compatible = "atmel,sama5d3-udc";
1330                         reg = <0x00500000 0x100000
1331                                0xf8030000 0x4000>;
1332                         interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
1333                         clocks = <&udphs_clk>, <&utmi>;
1334                         clock-names = "pclk", "hclk";
1335                         status = "disabled";
1336
1337                         ep0 {
1338                                 reg = <0>;
1339                                 atmel,fifo-size = <64>;
1340                                 atmel,nb-banks = <1>;
1341                         };
1342
1343                         ep1 {
1344                                 reg = <1>;
1345                                 atmel,fifo-size = <1024>;
1346                                 atmel,nb-banks = <3>;
1347                                 atmel,can-dma;
1348                                 atmel,can-isoc;
1349                         };
1350
1351                         ep2 {
1352                                 reg = <2>;
1353                                 atmel,fifo-size = <1024>;
1354                                 atmel,nb-banks = <3>;
1355                                 atmel,can-dma;
1356                                 atmel,can-isoc;
1357                         };
1358
1359                         ep3 {
1360                                 reg = <3>;
1361                                 atmel,fifo-size = <1024>;
1362                                 atmel,nb-banks = <2>;
1363                                 atmel,can-dma;
1364                         };
1365
1366                         ep4 {
1367                                 reg = <4>;
1368                                 atmel,fifo-size = <1024>;
1369                                 atmel,nb-banks = <2>;
1370                                 atmel,can-dma;
1371                         };
1372
1373                         ep5 {
1374                                 reg = <5>;
1375                                 atmel,fifo-size = <1024>;
1376                                 atmel,nb-banks = <2>;
1377                                 atmel,can-dma;
1378                         };
1379
1380                         ep6 {
1381                                 reg = <6>;
1382                                 atmel,fifo-size = <1024>;
1383                                 atmel,nb-banks = <2>;
1384                                 atmel,can-dma;
1385                         };
1386
1387                         ep7 {
1388                                 reg = <7>;
1389                                 atmel,fifo-size = <1024>;
1390                                 atmel,nb-banks = <2>;
1391                                 atmel,can-dma;
1392                         };
1393
1394                         ep8 {
1395                                 reg = <8>;
1396                                 atmel,fifo-size = <1024>;
1397                                 atmel,nb-banks = <2>;
1398                         };
1399
1400                         ep9 {
1401                                 reg = <9>;
1402                                 atmel,fifo-size = <1024>;
1403                                 atmel,nb-banks = <2>;
1404                         };
1405
1406                         ep10 {
1407                                 reg = <10>;
1408                                 atmel,fifo-size = <1024>;
1409                                 atmel,nb-banks = <2>;
1410                         };
1411
1412                         ep11 {
1413                                 reg = <11>;
1414                                 atmel,fifo-size = <1024>;
1415                                 atmel,nb-banks = <2>;
1416                         };
1417
1418                         ep12 {
1419                                 reg = <12>;
1420                                 atmel,fifo-size = <1024>;
1421                                 atmel,nb-banks = <2>;
1422                         };
1423
1424                         ep13 {
1425                                 reg = <13>;
1426                                 atmel,fifo-size = <1024>;
1427                                 atmel,nb-banks = <2>;
1428                         };
1429
1430                         ep14 {
1431                                 reg = <14>;
1432                                 atmel,fifo-size = <1024>;
1433                                 atmel,nb-banks = <2>;
1434                         };
1435
1436                         ep15 {
1437                                 reg = <15>;
1438                                 atmel,fifo-size = <1024>;
1439                                 atmel,nb-banks = <2>;
1440                         };
1441                 };
1442
1443                 usb1: ohci@00600000 {
1444                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1445                         reg = <0x00600000 0x100000>;
1446                         interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
1447                         clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
1448                         clock-names = "ohci_clk", "hclk", "uhpck";
1449                         status = "disabled";
1450                 };
1451
1452                 usb2: ehci@00700000 {
1453                         compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
1454                         reg = <0x00700000 0x100000>;
1455                         interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
1456                         clocks = <&utmi>, <&uhphs_clk>;
1457                         clock-names = "usb_clk", "ehci_clk";
1458                         status = "disabled";
1459                 };
1460
1461                 nand0: nand@60000000 {
1462                         compatible = "atmel,at91rm9200-nand";
1463                         #address-cells = <1>;
1464                         #size-cells = <1>;
1465                         ranges;
1466                         reg = < 0x60000000 0x01000000   /* EBI CS3 */
1467                                 0xffffc070 0x00000490   /* SMC PMECC regs */
1468                                 0xffffc500 0x00000100   /* SMC PMECC Error Location regs */
1469                                 0x00110000 0x00018000   /* ROM code */
1470                                 >;
1471                         interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
1472                         atmel,nand-addr-offset = <21>;
1473                         atmel,nand-cmd-offset = <22>;
1474                         atmel,nand-has-dma;
1475                         pinctrl-names = "default";
1476                         pinctrl-0 = <&pinctrl_nand0_ale_cle>;
1477                         atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
1478                         status = "disabled";
1479
1480                         nfc@70000000 {
1481                                 compatible = "atmel,sama5d3-nfc";
1482                                 #address-cells = <1>;
1483                                 #size-cells = <1>;
1484                                 reg = <
1485                                         0x70000000 0x08000000   /* NFC Command Registers */
1486                                         0xffffc000 0x00000070   /* NFC HSMC regs */
1487                                         0x00200000 0x00100000   /* NFC SRAM banks */
1488                                         >;
1489                                 clocks = <&hsmc_clk>;
1490                         };
1491                 };
1492         };
1493 };