4 //#include "lcd-b101ew05.dtsi"
5 #include "lcd-F402.dtsi"
12 compatible = "wlan-platdata";
15 sdio_vref = <1800>; //1800mv or 3300mv
18 power_pmu_regulator = "act_ldo3";
19 power_pmu_enable_level = <1>; //1->HIGH, 0->LOW
22 //vref_ctrl_gpio = <&gpio0 GPIO_A2 GPIO_ACTIVE_HIGH>;
23 vref_pmu_regulator = "act_ldo3";
24 vref_pmu_enable_level = <1>; //1->HIGH, 0->LOW
26 WIFI,poweren_gpio = <&gpio4 GPIO_D4 GPIO_ACTIVE_HIGH>;
27 WIFI,host_wake_irq = <&gpio4 GPIO_D6 GPIO_ACTIVE_HIGH>;
28 //WIFI,reset_gpio = <&gpio0 GPIO_A2 GPIO_ACTIVE_LOW>;
34 compatible = "bluetooth-platdata";
36 //wifi-bt-power-toggle;
38 uart_rts_gpios = <&gpio4 GPIO_C3 GPIO_ACTIVE_LOW>;
39 pinctrl-names = "default","rts_gpio";
40 pinctrl-0 = <&uart0_rts>;
41 pinctrl-1 = <&uart0_rts_gpio>;
43 BT,power_gpio = <&gpio4 GPIO_D3 GPIO_ACTIVE_HIGH>;
44 BT,reset_gpio = <&gpio4 GPIO_D5 GPIO_ACTIVE_HIGH>;
45 BT,wake_gpio = <&gpio4 GPIO_D2 GPIO_ACTIVE_HIGH>;
46 BT,wake_host_irq = <&gpio4 GPIO_D7 GPIO_ACTIVE_LOW>;
52 compatible = "hall_och165t";
53 type = <SENSOR_TYPE_HALL>;
54 irq-gpio = <&gpio0 GPIO_A6 IRQ_TYPE_EDGE_BOTH>;
58 compatible = "pwm-backlight";
59 pwms = <&pwm0 0 25000>;
60 brightness-levels = <255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240
61 239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220
62 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200
63 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180
64 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160
65 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140
66 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120
67 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100
68 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70
69 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40
70 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
72 default-brightness-level = <200>;
73 enable-gpios = <&gpio7 GPIO_A2 GPIO_ACTIVE_HIGH>;
77 compatible = "rockchip_pwm_regulator";
78 pwms = <&pwm1 0 2000>;
80 rockchip,pwm_voltage_map= <925000 950000 975000 1000000 1025000 1050000 1075000 1100000 1125000 1150000 1175000 1200000 1225000 1250000 1275000 1300000 1325000 1350000 1375000 1400000>;
81 rockchip,pwm_voltage= <1000000>;
82 rockchip,pwm_min_voltage= <925000>;
83 rockchip,pwm_max_voltage= <1400000>;
84 rockchip,pwm_suspend_voltage= <950000>;
85 rockchip,pwm_coefficient= <475>;
89 pwm_reg0: regulator@0 {
90 regulator-compatible = "pwm_dcdc1";
91 regulator-name= "vdd_logic";
92 regulator-min-microvolt = <925000>;
93 regulator-max-microvolt = <1400000>;
100 codec_hdmi_i2s: codec-hdmi-i2s {
101 compatible = "hdmi-i2s";
104 codec_hdmi_spdif: codec-hdmi-spdif {
105 compatible = "hdmi-spdif";
109 compatible = "rockchip-hdmi-i2s";
112 audio-codec = <&codec_hdmi_i2s>;
113 i2s-controller = <&i2s>;
116 //bitclock-inversion;
124 rockchip-hdmi-spdif {
125 compatible = "rockchip-hdmi-spdif";
128 audio-codec = <&codec_hdmi_spdif>;
129 i2s-controller = <&spdif>;
135 compatible = "rockchip-rt5631";
138 audio-codec = <&rt5631>;
139 i2s-controller = <&i2s>;
142 //bitclock-inversion;
151 compatible = "rockchip-rt3261";
154 audio-codec = <&rt3261>;
155 i2s-controller = <&i2s>;
158 //bitclock-inversion;
164 audio-codec = <&rt3261>;
165 i2s-controller = <&i2s>;
177 compatible = "rockchip,rk3288-usb-control";
179 host_drv_gpio = <&gpio0 GPIO_B6 GPIO_ACTIVE_LOW>;
180 otg_drv_gpio = <&gpio0 GPIO_B4 GPIO_ACTIVE_LOW>;
182 rockchip,remote_wakeup;
183 rockchip,usb_irq_wakeup;
188 // power_ctl_by = "gpio"; //"gpio" "pmu"
189 power-gpio = <&gpio0 GPIO_A6 GPIO_ACTIVE_HIGH>;
190 // power-pmu = "act_ldo"
191 // reset-gpio = <&gpio4 GPIO_A7 GPIO_ACTIVE_LOW>;
195 //used for init some gpio
196 init-gpios = <&gpio0 GPIO_A6 GPIO_ACTIVE_HIGH
197 /*&gpio0 GPIO_C2 GPIO_ACTIVE_HIGH */
198 /*&gpio7 GPIO_B7 GPIO_ACTIVE_LOW */>;
202 rockchip,pins = <GPIO0_C2>;
203 rockchip,pull = <VALUE_PULL_DOWN>;
211 rockchip,pins = <GPIO7_A7>;
212 rockchip,pull = <VALUE_PULL_DOWN>;
218 //could add other pinctrl definition such as gpio
223 status = "disabled"; // used nand set "disabled" ,used emmc set "okay"
226 status = "disabled"; // used nand set "disabled" ,used emmc set "okay"
230 status = "okay"; // used nand set "disabled" ,used emmc set "okay"
234 clock-frequency = <100000000>;
235 clock-freq-min-max = <400000 100000000>;
241 //supports-DDR_MODE; //you should set the two value in your project. only close in RK3288-SDK board.
245 keep-power-in-suspend;
252 clock-frequency = <50000000>;
253 clock-freq-min-max = <400000 50000000>;
257 card-detect-delay = <200>;
260 keep-power-in-suspend;
262 vmmc-supply = <&rk808_ldo5_reg>;
267 clock-frequency = <50000000>;
268 clock-freq-min-max = <200000 50000000>;
272 keep-power-in-suspend;
279 max-freq = <48000000>;
282 compatible = "rockchip,spi_test_bus0_cs0";
284 spi-max-frequency = <24000000>;
294 compatible = "rockchip,spi_test_bus0_cs1";
296 spi-max-frequency = <24000000>;
308 max-freq = <48000000>;
311 compatible = "rockchip,spi_test_bus1_cs0";
313 spi-max-frequency = <24000000>;
326 max-freq = <48000000>;
329 compatible = "rockchip,spi_test_bus2_cs0";
331 spi-max-frequency = <24000000>;
340 compatible = "rockchip,spi_test_bus2_cs1";
342 spi-max-frequency = <24000000>;
354 dma-names = "!tx", "!rx";
355 pinctrl-0 = <&uart0_xfer &uart0_cts>;
369 compatible = "silergy,syr82x";
373 #address-cells = <1>;
375 syr827_dc1: regulator@0 {
377 regulator-compatible = "syr82x_dcdc1";
378 regulator-name = "vdd_arm";
379 regulator-min-microvolt = <712500>;
380 regulator-max-microvolt = <1500000>;
383 regulator-initial-mode = <0x2>;
384 regulator-initial-state = <3>;
385 regulator-state-mem {
386 regulator-state-mode = <0x2>;
387 regulator-state-disabled;
388 regulator-state-uv = <900000>;
394 compatible = "silergy,syr82x";
398 #address-cells = <1>;
400 syr828_dc1: regulator@0 {
402 regulator-compatible = "syr82x_dcdc1";
403 regulator-name = "vdd_gpu";
404 regulator-min-microvolt = <712500>;
405 regulator-max-microvolt = <1500000>;
408 regulator-initial-mode = <0x2>;
409 regulator-initial-state = <3>;
410 regulator-state-mem {
411 regulator-state-mode = <0x2>;
412 regulator-state-enabled;
413 regulator-state-uv = <900000>;
418 act8846: act8846@5a {
423 ricoh619: ricoh619@32 {
427 bq24296: bq24296@6b {
428 compatible = "ti,bq24296";
430 gpios = <&gpio0 GPIO_A7 GPIO_ACTIVE_HIGH>,<&gpio0 GPIO_B0 GPIO_ACTIVE_HIGH>;
431 bq24296,chg_current = <1000 2000 3000>;
435 bq27320: bq27320@55 {
436 compatible = "ti,bq27320";
438 /* gpios = <&gpio0 GPIO_A7 GPIO_ACTIVE_HIGH>; */
443 compatible = "cw201x";
445 dc_det_gpio = <&gpio0 GPIO_B0 GPIO_ACTIVE_LOW>;
446 bat_low_gpio = <&gpio0 GPIO_A7 GPIO_ACTIVE_LOW>;
447 chg_ok_gpio = <&gpio0 GPIO_B1 GPIO_ACTIVE_HIGH>;
448 bat_config_info = <0x15 0x42 0x60 0x59 0x52 0x58 0x4D 0x48 0x48 0x44 0x44 0x46 0x49 0x48 0x32
449 0x24 0x20 0x17 0x13 0x0F 0x19 0x3E 0x51 0x45 0x08 0x76 0x0B 0x85 0x0E 0x1C 0x2E 0x3E 0x4D 0x52 0x52
450 0x57 0x3D 0x1B 0x6A 0x2D 0x25 0x43 0x52 0x87 0x8F 0x91 0x94 0x52 0x82 0x8C 0x92 0x96 0xFF 0x7B 0xBB
451 0xCB 0x2F 0x7D 0x72 0xA5 0xB5 0xC1 0x46 0xAE>;
457 compatible = "rtc,hym8563";
459 irq_gpio = <&gpio0 GPIO_A4 IRQ_TYPE_EDGE_FALLING>;
467 compatible = "nxp,pcf8563";
472 compatible = "gs_mma8452";
474 type = <SENSOR_TYPE_ACCEL>;
475 irq-gpio = <&gpio8 GPIO_A0 IRQ_TYPE_EDGE_FALLING>;
477 poll_delay_ms = <30>;
481 compatible = "gs_lis3dh";
483 type = <SENSOR_TYPE_ACCEL>;
484 irq-gpio = <&gpio0 GPIO_A0 IRQ_TYPE_LEVEL_LOW>;
486 poll_delay_ms = <30>;
491 compatible = "ak8963";
494 compass-adapt_num = <0>;
495 compass-orientation = <1 0 0 0 1 0 0 0 1>;
504 compatible = "ak8975";
507 compass-adapt_num = <0>;
508 compass-orientation = <0 1 0 1 0 0 0 0 1>;
520 compatible = "rt5631";
524 compatible = "es8323";
528 compatible = "rt3261";
530 // codec-en-gpio = <0>;//sdk default high level
532 modem-input-mode = <1>;
533 lout-to-modem_mode = <1>;
535 playback-if1-data_control = <0>;
536 playback-if2-data_control = <0>;
539 compatible = "rt5616";
551 compatible = "goodix,gt8xx";
553 touch-gpio = <&gpio7 GPIO_A6 IRQ_TYPE_LEVEL_LOW>;
554 reset-gpio = <&gpio7 GPIO_A5 GPIO_ACTIVE_LOW>;
555 //power-gpio = <&gpio0 GPIO_C5 GPIO_ACTIVE_LOW>;
561 compatible = "ct,vtl_ts";
563 screen_max_x = <1536>;
564 screen_max_y = <2048>;
565 irq_gpio_number = <&gpio7 GPIO_A6 IRQ_TYPE_LEVEL_LOW>;
566 rst_gpio_number = <&gpio7 GPIO_A5 GPIO_ACTIVE_HIGH>;
575 rockchip,disp-mode = <DUAL>;
579 display-timings = <&disp_timings>;
582 /*lcdc1 as PRMRY(LCD),lcdc0 as EXTEND(HDMI)*/
585 rockchip,mirror = <NO_MIRROR>;
586 rockchip,cabc_mode = <0>;
587 power_ctr: power_ctr {
588 rockchip,debug = <0>;
590 rockchip,power_type = <GPIO>;
591 gpios = <&gpio7 GPIO_A3 GPIO_ACTIVE_HIGH>;
592 rockchip,delay = <10>;
596 rockchip,power_type = <GPIO>;
597 gpios = <&gpio7 GPIO_A4 GPIO_ACTIVE_HIGH>;
598 rockchip,delay = <10>;
602 rockchip,power_type = <GPIO>;
603 gpios = <&gpio3 GPIO_D6 GPIO_ACTIVE_HIGH>;
604 rockchip,delay = <5>;
612 rockchip,mirror = <ROTATE_270>;
618 rockchips,hdmi_audio_source = <0>;
625 compatible = "rockchip_headset";
626 headset_gpio = <&gpio7 GPIO_A7 GPIO_ACTIVE_LOW>;
627 pinctrl-names = "default";
628 pinctrl-0 = <&gpio7_a7>;
629 io-channels = <&adc 2>;
632 hook_down_type = ; //interrupt hook key down status
637 compatible = "rockchip,key";
638 io-channels = <&adc 1>;
643 rockchip,adc_value = <1>;
648 label = "volume down";
649 rockchip,adc_value = <170>;
653 gpios = <&gpio0 GPIO_A5 GPIO_ACTIVE_LOW>;
662 rockchip,adc_value = <355>;
668 rockchip,adc_value = <746>;
674 rockchip,adc_value = <560>;
680 rockchip,adc_value = <450>;
694 &clk_core_dvfs_table {
715 &clk_gpu_dvfs_table {
727 &clk_ddr_dvfs_table {
738 SYS_STATUS_NORMAL 400000
739 SYS_STATUS_SUSPEND 200000
740 SYS_STATUS_VIDEO_1080P 240000
741 SYS_STATUS_VIDEO_4K 400000
742 SYS_STATUS_PERFORMANCE 528000
743 SYS_STATUS_DUALVIEW 400000
744 SYS_STATUS_BOOST 324000
745 SYS_STATUS_ISP 400000
756 /include/ "act8846.dtsi"
758 gpios =<&gpio7 GPIO_A1 GPIO_ACTIVE_LOW>,<&gpio0 GPIO_B2 GPIO_ACTIVE_HIGH>;
759 act8846,system-power-controller;
763 dcdc1_reg: regulator@0{
764 regulator-name= "act_dcdc1";
765 regulator-min-microvolt = <1200000>;
766 regulator-max-microvolt = <1200000>;
771 dcdc2_reg: regulator@1 {
772 regulator-name= "vccio";
773 regulator-min-microvolt = <3300000>;
774 regulator-max-microvolt = <3300000>;
775 regulator-initial-state = <3>;
776 regulator-state-mem {
777 regulator-state-enabled;
778 regulator-state-uv = <3300000>;
782 dcdc3_reg: regulator@2 {
783 regulator-name= "vdd_logic";
784 regulator-min-microvolt = <700000>;
785 regulator-max-microvolt = <1500000>;
786 regulator-initial-state = <3>;
787 regulator-state-mem {
788 regulator-state-enabled;
789 regulator-state-uv = <1000000>;
794 dcdc4_reg: regulator@3 {
795 regulator-name= "act_dcdc4";
796 regulator-min-microvolt = <2000000>;
797 regulator-max-microvolt = <2000000>;
798 regulator-initial-state = <3>;
799 regulator-state-mem {
800 regulator-state-enabled;
801 regulator-state-uv = <2000000>;
805 ldo1_reg: regulator@4 {
806 regulator-name= "vccio_sd";
807 regulator-min-microvolt = <3300000>;
808 regulator-max-microvolt = <3300000>;
812 ldo2_reg: regulator@5 {
813 regulator-name= "act_ldo2";
814 regulator-min-microvolt = <1000000>;
815 regulator-max-microvolt = <1000000>;
819 ldo3_reg: regulator@6 {
820 regulator-name= "act_ldo3";
821 regulator-min-microvolt = <3300000>;
822 regulator-max-microvolt = <3300000>;
826 ldo4_reg:regulator@7 {
827 regulator-name= "act_ldo4";
828 regulator-min-microvolt = <3300000>;
829 regulator-max-microvolt = <3300000>;
833 ldo5_reg: regulator@8 {
834 regulator-name= "act_ldo5";
835 regulator-min-microvolt = <3300000>;
836 regulator-max-microvolt = <3300000>;
840 ldo6_reg: regulator@9 {
841 regulator-name= "act_ldo6";
842 regulator-min-microvolt = <1000000>;
843 regulator-max-microvolt = <1000000>;
844 regulator-initial-state = <3>;
845 regulator-state-mem {
846 regulator-state-enabled;
851 ldo7_reg: regulator@10 {
852 regulator-name= "vcc_18";
853 regulator-min-microvolt = <1800000>;
854 regulator-max-microvolt = <1800000>;
855 regulator-initial-state = <3>;
856 regulator-state-mem {
857 regulator-state-enabled;
862 ldo8_reg: regulator@11 {
863 regulator-name= "act_ldo8";
864 regulator-min-microvolt = <1800000>;
865 regulator-max-microvolt = <1800000>;
872 /include/ "rk808.dtsi"
874 gpios =<&gpio0 GPIO_A4 GPIO_ACTIVE_HIGH>,<&gpio0 GPIO_B3 GPIO_ACTIVE_LOW>;
875 rk808,system-power-controller;
879 rk808_dcdc1_reg: regulator@0{
880 regulator-name= "vdd_arm";
885 rk808_dcdc2_reg: regulator@1 {
886 regulator-name= "vdd_gpu";
891 rk808_dcdc3_reg: regulator@2 {
892 regulator-name= "rk_dcdc3";
893 regulator-min-microvolt = <1200000>;
894 regulator-max-microvolt = <1200000>;
899 rk808_dcdc4_reg: regulator@3 {
900 regulator-name= "vccio";
901 regulator-min-microvolt = <1800000>;
902 regulator-max-microvolt = <3300000>;
907 rk808_ldo1_reg: regulator@4 {
908 regulator-name= "rk_ldo1";
909 regulator-min-microvolt = <3300000>;
910 regulator-max-microvolt = <3300000>;
915 rk808_ldo2_reg: regulator@5 {
916 regulator-name= "rk_ldo2";
917 regulator-min-microvolt = <3300000>;
918 regulator-max-microvolt = <3300000>;
923 rk808_ldo3_reg: regulator@6 {
924 regulator-name= "rk_ldo3";
925 regulator-min-microvolt = <1000000>;
926 regulator-max-microvolt = <1000000>;
931 rk808_ldo4_reg:regulator@7 {
932 regulator-name= "rk_ldo4";
933 regulator-min-microvolt = <1800000>;
934 regulator-max-microvolt = <1800000>;
939 rk808_ldo5_reg: regulator@8 {
940 regulator-name= "vcc_sd";
941 regulator-min-microvolt = <1800000>;
942 regulator-max-microvolt = <3300000>;
947 rk808_ldo6_reg: regulator@9 {
948 regulator-name= "rk_ldo6";
949 regulator-min-microvolt = <1000000>;
950 regulator-max-microvolt = <1000000>;
955 rk808_ldo7_reg: regulator@10 {
956 regulator-name= "rk_ldo7";
957 regulator-min-microvolt = <1800000>;
958 regulator-max-microvolt = <1800000>;
963 rk808_ldo8_reg: regulator@11 {
964 regulator-name= "rk_ldo8";
965 regulator-min-microvolt = <3300000>;
966 regulator-max-microvolt = <3300000>;
971 rk808_ldo9_reg: regulator@12 {
972 regulator-name= "rk_ldo9";
977 rk808_ldo10_reg: regulator@13 {
978 regulator-name= "rk_ldo10";
986 regulator-name = "vcc30_lcd";
989 regulator-name = "vcc18_cif";
992 regulator-name = "vcc_flash";
995 regulator-name = "vcc_flash";
998 regulator-name = "vccio_wl";
1001 regulator-name = "vccio";
1004 regulator-name = "vccio";
1007 regulator-name = "vccio";
1010 regulator-name = "vccio";
1013 regulator-name = "vcc_sd";