4 //#include "lcd-b101ew05.dtsi"
5 #include "lcd-F402.dtsi"
6 #include "vtl_ts_sdk8846.dtsi"
14 compatible = "wlan-platdata";
16 wifi_chip_type = "rkwifi"; // rkwifi, like ap6xxx, rk90x
19 // other, for other wifi
20 sdio_vref = <1800>; //1800mv or 3300mv
23 power_pmu_regulator = "act_ldo3";
24 power_pmu_enable_level = <1>; //1->HIGH, 0->LOW
27 //vref_ctrl_gpio = <&gpio0 GPIO_A2 GPIO_ACTIVE_HIGH>;
28 vref_pmu_regulator = "act_ldo3";
29 vref_pmu_enable_level = <1>; //1->HIGH, 0->LOW
31 WIFI,poweren_gpio = <&gpio4 GPIO_D4 GPIO_ACTIVE_HIGH>;
32 WIFI,host_wake_irq = <&gpio4 GPIO_D6 GPIO_ACTIVE_HIGH>;
33 //WIFI,reset_gpio = <&gpio0 GPIO_A2 GPIO_ACTIVE_LOW>;
39 compatible = "bluetooth-platdata";
41 //wifi-bt-power-toggle;
43 uart_rts_gpios = <&gpio4 GPIO_C3 GPIO_ACTIVE_LOW>;
44 pinctrl-names = "default","rts_gpio";
45 pinctrl-0 = <&uart0_rts>;
46 pinctrl-1 = <&uart0_rts_gpio>;
48 BT,power_gpio = <&gpio4 GPIO_D3 GPIO_ACTIVE_HIGH>;
49 BT,reset_gpio = <&gpio4 GPIO_D5 GPIO_ACTIVE_HIGH>;
50 BT,wake_gpio = <&gpio4 GPIO_D2 GPIO_ACTIVE_HIGH>;
51 BT,wake_host_irq = <&gpio4 GPIO_D7 GPIO_ACTIVE_LOW>;
57 compatible = "hall_och165t";
58 type = <SENSOR_TYPE_HALL>;
59 irq-gpio = <&gpio0 GPIO_A6 IRQ_TYPE_EDGE_BOTH>;
63 compatible = "pwm-backlight";
64 pwms = <&pwm0 0 25000>;
65 brightness-levels = <255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240
66 239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220
67 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200
68 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180
69 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160
70 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140
71 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120
72 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100
73 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70
74 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40
75 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
77 default-brightness-level = <200>;
78 enable-gpios = <&gpio7 GPIO_A2 GPIO_ACTIVE_HIGH>;
82 compatible = "rockchip_pwm_regulator";
83 pwms = <&pwm1 0 2000>;
85 rockchip,pwm_voltage_map= <925000 950000 975000 1000000 1025000 1050000 1075000 1100000 1125000 1150000 1175000 1200000 1225000 1250000 1275000 1300000 1325000 1350000 1375000 1400000>;
86 rockchip,pwm_voltage= <1000000>;
87 rockchip,pwm_min_voltage= <925000>;
88 rockchip,pwm_max_voltage= <1400000>;
89 rockchip,pwm_suspend_voltage= <950000>;
90 rockchip,pwm_coefficient= <475>;
94 pwm_reg0: regulator@0 {
95 regulator-compatible = "pwm_dcdc1";
96 regulator-name= "vdd_logic";
97 regulator-min-microvolt = <925000>;
98 regulator-max-microvolt = <1400000>;
105 codec_hdmi_i2s: codec-hdmi-i2s {
106 compatible = "hdmi-i2s";
109 codec_hdmi_spdif: codec-hdmi-spdif {
110 compatible = "hdmi-spdif";
114 compatible = "rockchip-hdmi-i2s";
117 audio-codec = <&codec_hdmi_i2s>;
118 i2s-controller = <&i2s>;
121 //bitclock-inversion;
129 rockchip-hdmi-spdif {
130 compatible = "rockchip-hdmi-spdif";
133 audio-codec = <&codec_hdmi_spdif>;
134 i2s-controller = <&spdif>;
140 compatible = "rockchip-rt5631";
143 audio-codec = <&rt5631>;
144 i2s-controller = <&i2s>;
147 //bitclock-inversion;
156 compatible = "rockchip-rt3261";
159 audio-codec = <&rt3261>;
160 i2s-controller = <&i2s>;
163 //bitclock-inversion;
169 audio-codec = <&rt3261>;
170 i2s-controller = <&i2s>;
182 compatible = "rockchip,rk3288-usb-control";
184 host_drv_gpio = <&gpio0 GPIO_B6 GPIO_ACTIVE_LOW>;
185 otg_drv_gpio = <&gpio0 GPIO_B4 GPIO_ACTIVE_LOW>;
187 rockchip,remote_wakeup;
188 rockchip,usb_irq_wakeup;
191 bootargs = "vmalloc=512M";
196 // power_ctl_by = "gpio"; //"gpio" "pmu"
197 power-gpio = <&gpio0 GPIO_A6 GPIO_ACTIVE_HIGH>;
198 // power-pmu = "act_ldo"
199 // reset-gpio = <&gpio4 GPIO_A7 GPIO_ACTIVE_LOW>;
201 clock_in_out = "input";
207 //used for init some gpio
208 init-gpios = <&gpio0 GPIO_A6 GPIO_ACTIVE_HIGH
209 /*&gpio0 GPIO_C2 GPIO_ACTIVE_HIGH */
210 /*&gpio7 GPIO_B7 GPIO_ACTIVE_LOW */>;
214 rockchip,pins = <GPIO0_C2>;
215 rockchip,pull = <VALUE_PULL_DOWN>;
223 rockchip,pins = <GPIO7_A7>;
224 rockchip,pull = <VALUE_PULL_DOWN>;
230 //could add other pinctrl definition such as gpio
232 // gmac drive strength
235 rockchip,drive = <VALUE_DRV_12MA>;
238 mac_txpins: mac-txpins {
239 rockchip,drive = <VALUE_DRV_12MA>;
242 mac_rxpins: mac-rxpins {
243 rockchip,drive = <VALUE_DRV_12MA>;
247 rockchip,drive = <VALUE_DRV_12MA>;
250 mac_mdpins: mac-mdpins {
251 rockchip,drive = <VALUE_DRV_12MA>;
257 status = "disabled"; // used nand set "disabled" ,used emmc set "okay"
260 status = "disabled"; // used nand set "disabled" ,used emmc set "okay"
264 status = "okay"; // used nand set "disabled" ,used emmc set "okay"
268 clock-frequency = <100000000>;
269 clock-freq-min-max = <400000 100000000>;
276 //supports-DDR_MODE; //you should set the two value in your project. only close in RK3288-SDK board.
280 keep-power-in-suspend;
287 clock-frequency = <50000000>;
288 clock-freq-min-max = <400000 50000000>;
292 card-detect-delay = <200>;
295 keep-power-in-suspend;
297 vmmc-supply = <&ldo1_reg>;
302 clock-frequency = <50000000>;
303 clock-freq-min-max = <200000 50000000>;
307 keep-power-in-suspend;
314 max-freq = <48000000>;
317 compatible = "rockchip,spi_test_bus0_cs0";
319 spi-max-frequency = <24000000>;
329 compatible = "rockchip,spi_test_bus0_cs1";
331 spi-max-frequency = <24000000>;
343 max-freq = <48000000>;
346 compatible = "rockchip,spi_test_bus1_cs0";
348 spi-max-frequency = <24000000>;
361 max-freq = <48000000>;
364 compatible = "rockchip,spi_test_bus2_cs0";
366 spi-max-frequency = <24000000>;
375 compatible = "rockchip,spi_test_bus2_cs1";
377 spi-max-frequency = <24000000>;
389 dma-names = "!tx", "!rx";
390 pinctrl-0 = <&uart0_xfer &uart0_cts>;
404 compatible = "silergy,syr82x";
408 #address-cells = <1>;
410 syr827_dc1: regulator@0 {
412 regulator-compatible = "syr82x_dcdc1";
413 regulator-name = "vdd_arm";
414 regulator-min-microvolt = <712500>;
415 regulator-max-microvolt = <1500000>;
418 regulator-initial-mode = <0x2>;
419 regulator-initial-state = <3>;
420 regulator-state-mem {
421 regulator-state-mode = <0x2>;
422 regulator-state-disabled;
423 regulator-state-uv = <900000>;
429 compatible = "silergy,syr82x";
433 #address-cells = <1>;
435 syr828_dc1: regulator@0 {
437 regulator-compatible = "syr82x_dcdc1";
438 regulator-name = "vdd_gpu";
439 regulator-min-microvolt = <712500>;
440 regulator-max-microvolt = <1500000>;
443 regulator-initial-mode = <0x2>;
444 regulator-initial-state = <3>;
445 regulator-state-mem {
446 regulator-state-mode = <0x2>;
447 regulator-state-enabled;
448 regulator-state-uv = <900000>;
453 act8846: act8846@5a {
458 ricoh619: ricoh619@32 {
462 bq24296: bq24296@6b {
463 compatible = "ti,bq24296";
465 gpios = <&gpio0 GPIO_A7 GPIO_ACTIVE_HIGH>,<&gpio0 GPIO_B0 GPIO_ACTIVE_HIGH>;
466 bq24296,chg_current = <1000 2000 3000>;
470 bq27320: bq27320@55 {
471 compatible = "ti,bq27320";
473 /* gpios = <&gpio0 GPIO_A7 GPIO_ACTIVE_HIGH>; */
478 compatible = "cw201x";
480 dc_det_gpio = <&gpio0 GPIO_B0 GPIO_ACTIVE_LOW>;
481 bat_low_gpio = <&gpio0 GPIO_A7 GPIO_ACTIVE_LOW>;
482 chg_ok_gpio = <&gpio0 GPIO_B1 GPIO_ACTIVE_HIGH>;
483 bat_config_info = <0x15 0x42 0x60 0x59 0x52 0x58 0x4D 0x48 0x48 0x44 0x44 0x46 0x49 0x48 0x32
484 0x24 0x20 0x17 0x13 0x0F 0x19 0x3E 0x51 0x45 0x08 0x76 0x0B 0x85 0x0E 0x1C 0x2E 0x3E 0x4D 0x52 0x52
485 0x57 0x3D 0x1B 0x6A 0x2D 0x25 0x43 0x52 0x87 0x8F 0x91 0x94 0x52 0x82 0x8C 0x92 0x96 0xFF 0x7B 0xBB
486 0xCB 0x2F 0x7D 0x72 0xA5 0xB5 0xC1 0x46 0xAE>;
492 compatible = "rtc,hym8563";
494 irq_gpio = <&gpio0 GPIO_A4 IRQ_TYPE_EDGE_FALLING>;
503 compatible = "mpu6050";
505 mpu-int_config = <0x10>;
506 mpu-level_shifter = <0>;
507 mpu-orientation = <0 1 0 1 0 0 0 0 1>;
511 irq-gpio = <&gpio8 GPIO_A0 IRQ_TYPE_LEVEL_LOW>;
517 compatible = "mpu_ak8963";
520 compass-adapt_num = <0>;
521 compass-orientation = <1 0 0 0 1 0 0 0 1>;
534 compatible = "rt5631";
538 compatible = "es8323";
542 compatible = "rt3261";
544 // codec-en-gpio = <0>;//sdk default high level
546 modem-input-mode = <1>;
547 lout-to-modem_mode = <1>;
549 playback-if1-data_control = <0>;
550 playback-if2-data_control = <0>;
553 compatible = "rt5616";
565 compatible = "goodix,gt8xx";
567 touch-gpio = <&gpio7 GPIO_A6 IRQ_TYPE_LEVEL_LOW>;
568 reset-gpio = <&gpio7 GPIO_A5 GPIO_ACTIVE_LOW>;
569 //power-gpio = <&gpio0 GPIO_C5 GPIO_ACTIVE_LOW>;
575 compatible = "ct,vtl_ts";
577 screen_max_x = <1536>;
578 screen_max_y = <2048>;
585 irq_gpio_number = <&gpio7 GPIO_A6 IRQ_TYPE_LEVEL_LOW>;
586 rst_gpio_number = <&gpio7 GPIO_A5 GPIO_ACTIVE_HIGH>;
595 rockchip,disp-mode = <DUAL>;
596 rockchip,uboot-logo-on = <1>;
600 display-timings = <&disp_timings>;
603 /*lcdc0 as PRMRY(LCD),lcdc1 as EXTEND(HDMI)*/
606 rockchip,mirror = <NO_MIRROR>;
607 rockchip,cabc_mode = <0>;
608 power_ctr: power_ctr {
609 rockchip,debug = <0>;
611 rockchip,power_type = <GPIO>;
612 gpios = <&gpio7 GPIO_A3 GPIO_ACTIVE_HIGH>;
613 rockchip,delay = <10>;
617 rockchip,power_type = <GPIO>;
618 gpios = <&gpio7 GPIO_A4 GPIO_ACTIVE_HIGH>;
619 rockchip,delay = <10>;
623 rockchip,power_type = <GPIO>;
624 gpios = <&gpio3 GPIO_D6 GPIO_ACTIVE_HIGH>;
625 rockchip,delay = <5>;
633 rockchip,mirror = <ROTATE_270>;
639 rockchips,hdmi_audio_source = <0>;
646 compatible = "rockchip_headset";
647 headset_gpio = <&gpio7 GPIO_A7 GPIO_ACTIVE_LOW>;
648 pinctrl-names = "default";
649 pinctrl-0 = <&gpio7_a7>;
650 io-channels = <&adc 2>;
653 hook_down_type = ; //interrupt hook key down status
658 compatible = "rockchip,key";
659 io-channels = <&adc 1>;
664 rockchip,adc_value = <1>;
669 label = "volume down";
670 rockchip,adc_value = <170>;
674 gpios = <&gpio0 GPIO_A5 GPIO_ACTIVE_LOW>;
683 rockchip,adc_value = <355>;
689 rockchip,adc_value = <746>;
695 rockchip,adc_value = <560>;
701 rockchip,adc_value = <450>;
715 &clk_core_dvfs_table {
736 &clk_gpu_dvfs_table {
748 &clk_ddr_dvfs_table {
759 SYS_STATUS_NORMAL 400000
760 SYS_STATUS_SUSPEND 200000
761 SYS_STATUS_VIDEO_1080P 240000
762 SYS_STATUS_VIDEO_4K 400000
763 SYS_STATUS_PERFORMANCE 528000
764 SYS_STATUS_DUALVIEW 400000
765 SYS_STATUS_BOOST 324000
766 SYS_STATUS_ISP 400000
777 /include/ "act8846.dtsi"
779 gpios =<&gpio7 GPIO_A1 GPIO_ACTIVE_LOW>,<&gpio0 GPIO_B2 GPIO_ACTIVE_HIGH>;
780 act8846,system-power-controller;
784 dcdc1_reg: regulator@0{
785 regulator-name= "act_dcdc1";
786 regulator-min-microvolt = <1200000>;
787 regulator-max-microvolt = <1200000>;
792 dcdc2_reg: regulator@1 {
793 regulator-name= "vccio";
794 regulator-min-microvolt = <3300000>;
795 regulator-max-microvolt = <3300000>;
796 regulator-initial-state = <3>;
797 regulator-state-mem {
798 regulator-state-enabled;
799 regulator-state-uv = <3300000>;
803 dcdc3_reg: regulator@2 {
804 regulator-name= "vdd_logic";
805 regulator-min-microvolt = <700000>;
806 regulator-max-microvolt = <1500000>;
807 regulator-initial-state = <3>;
808 regulator-state-mem {
809 regulator-state-enabled;
810 regulator-state-uv = <1000000>;
815 dcdc4_reg: regulator@3 {
816 regulator-name= "act_dcdc4";
817 regulator-min-microvolt = <2000000>;
818 regulator-max-microvolt = <2000000>;
819 regulator-initial-state = <3>;
820 regulator-state-mem {
821 regulator-state-enabled;
822 regulator-state-uv = <2000000>;
826 ldo1_reg: regulator@4 {
827 regulator-name= "vccio_sd";
828 regulator-min-microvolt = <1800000>;
829 regulator-max-microvolt = <3300000>;
833 ldo2_reg: regulator@5 {
834 regulator-name= "act_ldo2";
835 regulator-min-microvolt = <1000000>;
836 regulator-max-microvolt = <1000000>;
840 ldo3_reg: regulator@6 {
841 regulator-name= "act_ldo3";
842 regulator-min-microvolt = <3300000>;
843 regulator-max-microvolt = <3300000>;
847 ldo4_reg:regulator@7 {
848 regulator-name= "act_ldo4";
849 regulator-min-microvolt = <3300000>;
850 regulator-max-microvolt = <3300000>;
854 ldo5_reg: regulator@8 {
855 regulator-name= "act_ldo5";
856 regulator-min-microvolt = <3300000>;
857 regulator-max-microvolt = <3300000>;
861 ldo6_reg: regulator@9 {
862 regulator-name= "act_ldo6";
863 regulator-min-microvolt = <1000000>;
864 regulator-max-microvolt = <1000000>;
865 regulator-initial-state = <3>;
866 regulator-state-mem {
867 regulator-state-enabled;
872 ldo7_reg: regulator@10 {
873 regulator-name= "vcc_18";
874 regulator-min-microvolt = <1800000>;
875 regulator-max-microvolt = <1800000>;
876 regulator-initial-state = <3>;
877 regulator-state-mem {
878 regulator-state-enabled;
883 ldo8_reg: regulator@11 {
884 regulator-name= "act_ldo8";
885 regulator-min-microvolt = <1800000>;
886 regulator-max-microvolt = <1800000>;
893 /include/ "rk808.dtsi"
895 gpios =<&gpio0 GPIO_A4 GPIO_ACTIVE_HIGH>,<&gpio0 GPIO_B3 GPIO_ACTIVE_LOW>;
896 rk808,system-power-controller;
900 rk808_dcdc1_reg: regulator@0{
901 regulator-name= "vdd_arm";
906 rk808_dcdc2_reg: regulator@1 {
907 regulator-name= "vdd_gpu";
912 rk808_dcdc3_reg: regulator@2 {
913 regulator-name= "rk_dcdc3";
914 regulator-min-microvolt = <1200000>;
915 regulator-max-microvolt = <1200000>;
920 rk808_dcdc4_reg: regulator@3 {
921 regulator-name= "vccio";
922 regulator-min-microvolt = <1800000>;
923 regulator-max-microvolt = <3300000>;
928 rk808_ldo1_reg: regulator@4 {
929 regulator-name= "rk_ldo1";
930 regulator-min-microvolt = <3300000>;
931 regulator-max-microvolt = <3300000>;
936 rk808_ldo2_reg: regulator@5 {
937 regulator-name= "rk_ldo2";
938 regulator-min-microvolt = <3300000>;
939 regulator-max-microvolt = <3300000>;
944 rk808_ldo3_reg: regulator@6 {
945 regulator-name= "rk_ldo3";
946 regulator-min-microvolt = <1000000>;
947 regulator-max-microvolt = <1000000>;
952 rk808_ldo4_reg:regulator@7 {
953 regulator-name= "rk_ldo4";
954 regulator-min-microvolt = <1800000>;
955 regulator-max-microvolt = <1800000>;
960 rk808_ldo5_reg: regulator@8 {
961 regulator-name= "vcc_sd";
962 regulator-min-microvolt = <1800000>;
963 regulator-max-microvolt = <3300000>;
968 rk808_ldo6_reg: regulator@9 {
969 regulator-name= "rk_ldo6";
970 regulator-min-microvolt = <1000000>;
971 regulator-max-microvolt = <1000000>;
976 rk808_ldo7_reg: regulator@10 {
977 regulator-name= "rk_ldo7";
978 regulator-min-microvolt = <1800000>;
979 regulator-max-microvolt = <1800000>;
984 rk808_ldo8_reg: regulator@11 {
985 regulator-name= "rk_ldo8";
986 regulator-min-microvolt = <3300000>;
987 regulator-max-microvolt = <3300000>;
992 rk808_ldo9_reg: regulator@12 {
993 regulator-name= "rk_ldo9";
998 rk808_ldo10_reg: regulator@13 {
999 regulator-name= "rk_ldo10";
1000 regulator-always-on;
1007 regulator-name = "vcc30_lcd";
1010 regulator-name = "vcc18_cif";
1013 regulator-name = "vcc_flash";
1016 regulator-name = "vcc_flash";
1019 regulator-name = "vccio_wl";
1022 regulator-name = "vccio";
1025 regulator-name = "vccio";
1028 regulator-name = "vccio";
1031 regulator-name = "vccio";
1034 regulator-name = "vcc_sd";
1038 reg = <0x40000000 0x28000000>; /* 640MB */
1043 status = "disabled";