2 * This file is dual-licensed: you can use it either under the terms
3 * of the GPL or the X11 license, at your option. Note that this dual
4 * licensing only applies to this file, and not this project as a
7 * a) This file is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of the
10 * License, or (at your option) any later version.
12 * This file is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
19 * b) Permission is hereby granted, free of charge, to any person
20 * obtaining a copy of this software and associated documentation
21 * files (the "Software"), to deal in the Software without
22 * restriction, including without limitation the rights to use,
23 * copy, modify, merge, publish, distribute, sublicense, and/or
24 * sell copies of the Software, and to permit persons to whom the
25 * Software is furnished to do so, subject to the following
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
33 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
35 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
36 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
37 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
38 * OTHER DEALINGS IN THE SOFTWARE.
42 #include "rk3288-evb.dtsi"
45 compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
47 ext_gmac: external-gmac-clock {
48 compatible = "fixed-clock";
49 clock-frequency = <125000000>;
50 clock-output-names = "ext_gmac";
54 sdio_pwrseq: sdio-pwrseq {
55 compatible = "mmc-pwrseq-simple";
57 clock-names = "ext_clock";
58 pinctrl-names = "default";
59 pinctrl-0 = <&wifi_enable_h>;
62 * On the module itself this is one of these (depending
63 * on the actual card populated):
64 * - SDIO_RESET_L_WL_REG_ON
65 * - PDN (power down when low)
67 reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
72 cpu0-supply = <&vdd_cpu>;
76 clock-frequency = <400000>;
79 compatible = "rockchip,rk808";
81 interrupt-parent = <&gpio0>;
82 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
83 pinctrl-names = "default";
84 pinctrl-0 = <&pmic_int &global_pwroff>;
85 rockchip,system-power-controller;
88 clock-output-names = "xin32k", "rk808-clkout2";
90 vcc1-supply = <&vcc_sys>;
91 vcc2-supply = <&vcc_sys>;
92 vcc3-supply = <&vcc_sys>;
93 vcc4-supply = <&vcc_sys>;
94 vcc6-supply = <&vcc_sys>;
95 vcc7-supply = <&vcc_sys>;
96 vcc8-supply = <&vcc_18>;
97 vcc9-supply = <&vcc_io>;
98 vcc10-supply = <&vcc_io>;
99 vcc11-supply = <&vcc_sys>;
100 vcc12-supply = <&vcc_io>;
101 vddio-supply = <&vccio_pmu>;
107 regulator-min-microvolt = <750000>;
108 regulator-max-microvolt = <1350000>;
109 regulator-name = "vdd_arm";
110 regulator-state-mem {
111 regulator-off-in-suspend;
118 regulator-min-microvolt = <850000>;
119 regulator-max-microvolt = <1250000>;
120 regulator-name = "vdd_gpu";
121 regulator-ramp-delay = <6000>;
122 regulator-state-mem {
123 regulator-on-in-suspend;
124 regulator-suspend-microvolt = <1000000>;
131 regulator-name = "vcc_ddr";
132 regulator-state-mem {
133 regulator-on-in-suspend;
140 regulator-min-microvolt = <3300000>;
141 regulator-max-microvolt = <3300000>;
142 regulator-name = "vcc_io";
143 regulator-state-mem {
144 regulator-on-in-suspend;
145 regulator-suspend-microvolt = <3300000>;
149 vccio_pmu: LDO_REG1 {
152 regulator-min-microvolt = <3300000>;
153 regulator-max-microvolt = <3300000>;
154 regulator-name = "vccio_pmu";
155 regulator-state-mem {
156 regulator-on-in-suspend;
157 regulator-suspend-microvolt = <3300000>;
164 regulator-min-microvolt = <3300000>;
165 regulator-max-microvolt = <3300000>;
166 regulator-name = "vcc_tp";
167 regulator-state-mem {
168 regulator-off-in-suspend;
175 regulator-min-microvolt = <1000000>;
176 regulator-max-microvolt = <1000000>;
177 regulator-name = "vdd_10";
178 regulator-state-mem {
179 regulator-on-in-suspend;
180 regulator-suspend-microvolt = <1000000>;
184 vcc18_lcd: LDO_REG4 {
187 regulator-min-microvolt = <1800000>;
188 regulator-max-microvolt = <1800000>;
189 regulator-name = "vcc18_lcd";
190 regulator-state-mem {
191 regulator-on-in-suspend;
192 regulator-suspend-microvolt = <1800000>;
199 regulator-min-microvolt = <1800000>;
200 regulator-max-microvolt = <3300000>;
201 regulator-name = "vccio_sd";
202 regulator-state-mem {
203 regulator-on-in-suspend;
204 regulator-suspend-microvolt = <3300000>;
208 vdd10_lcd: LDO_REG6 {
211 regulator-min-microvolt = <1000000>;
212 regulator-max-microvolt = <1000000>;
213 regulator-name = "vdd10_lcd";
214 regulator-state-mem {
215 regulator-on-in-suspend;
216 regulator-suspend-microvolt = <1000000>;
223 regulator-min-microvolt = <1800000>;
224 regulator-max-microvolt = <1800000>;
225 regulator-name = "vcc_18";
226 regulator-state-mem {
227 regulator-on-in-suspend;
228 regulator-suspend-microvolt = <1800000>;
232 vcca_codec: LDO_REG8 {
235 regulator-min-microvolt = <3300000>;
236 regulator-max-microvolt = <3300000>;
237 regulator-name = "vcca_codec";
238 regulator-state-mem {
239 regulator-on-in-suspend;
240 regulator-suspend-microvolt = <3300000>;
244 vcc_wl: SWITCH_REG1 {
247 regulator-name = "vcc_wl";
248 regulator-state-mem {
249 regulator-on-in-suspend;
253 vcc_lcd: SWITCH_REG2 {
256 regulator-name = "vcc_lcd";
257 regulator-state-mem {
258 regulator-on-in-suspend;
266 phy-supply = <&vcc_phy>;
268 clock_in_out = "input";
269 snps,reset-gpio = <&gpio4 7 0>;
270 snps,reset-active-low;
271 snps,reset-delays-us = <0 10000 1000000>;
272 assigned-clocks = <&cru SCLK_MAC>;
273 assigned-clock-parents = <&ext_gmac>;
274 pinctrl-names = "default";
275 pinctrl-0 = <&rgmii_pins>;
282 power-supply = <&vcc_lcd>;
286 power-supply = <&vcc_lcd>;