2 * This file is dual-licensed: you can use it either under the terms
3 * of the GPL or the X11 license, at your option. Note that this dual
4 * licensing only applies to this file, and not this project as a
7 * a) This file is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of the
10 * License, or (at your option) any later version.
12 * This file is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
19 * b) Permission is hereby granted, free of charge, to any person
20 * obtaining a copy of this software and associated documentation
21 * files (the "Software"), to deal in the Software without
22 * restriction, including without limitation the rights to use,
23 * copy, modify, merge, publish, distribute, sublicense, and/or
24 * sell copies of the Software, and to permit persons to whom the
25 * Software is furnished to do so, subject to the following
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
33 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
35 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
36 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
37 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
38 * OTHER DEALINGS IN THE SOFTWARE.
43 #include "rk3036.dtsi"
46 model = "Rockchip RK3036 KylinBoard";
47 compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
50 compatible = "gpio-leds";
53 gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
54 label = "kylin:red:led";
55 pinctrl-names = "default";
56 pinctrl-0 = <&led_ctl>;
60 sdio_pwrseq: sdio-pwrseq {
61 compatible = "mmc-pwrseq-simple";
62 pinctrl-names = "default";
63 pinctrl-0 = <&bt_wake_h>;
66 * On the module itself this is one of these (depending
67 * on the actual card populated):
68 * - SDIO_RESET_L_WL_REG_ON
69 * - SDIO_RESET_L_WL_RST
70 * - SDIO_RESET_L_BT_EN
72 reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
73 <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */
74 <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */
78 compatible = "simple-audio-card";
79 simple-audio-card,format = "i2s";
80 simple-audio-card,name = "rockchip,rt5616-codec";
81 simple-audio-card,mclk-fs = <512>;
82 simple-audio-card,widgets =
83 "Microphone", "Microphone Jack",
84 "Headphone", "Headphone Jack";
85 simple-audio-card,routing =
86 "MIC1", "Microphone Jack",
87 "MIC2", "Microphone Jack",
88 "Microphone Jack", "micbias1",
89 "Headphone Jack", "HPOL",
90 "Headphone Jack", "HPOR";
92 simple-audio-card,cpu {
96 simple-audio-card,codec {
97 sound-dai = <&rt5616>;
101 vcc_sys: vsys-regulator {
102 compatible = "regulator-fixed";
103 regulator-name = "vcc_sys";
104 regulator-min-microvolt = <5000000>;
105 regulator-max-microvolt = <5000000>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
119 phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
120 phy-reset-duration = <10>; /* millisecond */
124 phy0: ethernet-phy@0 {
138 clock-frequency = <400000>;
143 compatible = "rockchip,rk808";
145 interrupt-parent = <&gpio2>;
146 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
147 pinctrl-names = "default";
148 pinctrl-0 = <&pmic_int &global_pwroff>;
149 rockchip,system-power-controller;
152 clock-output-names = "xin32k", "rk808-clkout2";
154 vcc1-supply = <&vcc_sys>;
155 vcc2-supply = <&vcc_sys>;
156 vcc3-supply = <&vcc_sys>;
157 vcc4-supply = <&vcc_sys>;
158 vcc6-supply = <&vcc_sys>;
159 vcc7-supply = <&vcc_sys>;
160 vcc8-supply = <&vcc_18>;
161 vcc9-supply = <&vcc_io>;
162 vcc10-supply = <&vcc_io>;
163 vcc11-supply = <&vcc_sys>;
164 vcc12-supply = <&vcc_io>;
165 vddio-supply = <&vccio_pmu>;
171 regulator-min-microvolt = <750000>;
172 regulator-max-microvolt = <1350000>;
173 regulator-name = "vdd_arm";
174 regulator-state-mem {
175 regulator-off-in-suspend;
182 regulator-min-microvolt = <850000>;
183 regulator-max-microvolt = <1250000>;
184 regulator-name = "vdd_gpu";
185 regulator-state-mem {
186 regulator-on-in-suspend;
187 regulator-suspend-microvolt = <1000000>;
194 regulator-name = "vcc_ddr";
195 regulator-state-mem {
196 regulator-on-in-suspend;
203 regulator-min-microvolt = <3300000>;
204 regulator-max-microvolt = <3300000>;
205 regulator-name = "vcc_io";
206 regulator-state-mem {
207 regulator-on-in-suspend;
208 regulator-suspend-microvolt = <3300000>;
212 vccio_pmu: LDO_REG1 {
215 regulator-min-microvolt = <3300000>;
216 regulator-max-microvolt = <3300000>;
217 regulator-name = "vccio_pmu";
218 regulator-state-mem {
219 regulator-on-in-suspend;
220 regulator-suspend-microvolt = <3300000>;
227 regulator-min-microvolt = <3300000>;
228 regulator-max-microvolt = <3300000>;
229 regulator-name = "vcc_tp";
230 regulator-state-mem {
231 regulator-off-in-suspend;
238 regulator-min-microvolt = <1000000>;
239 regulator-max-microvolt = <1000000>;
240 regulator-name = "vdd_10";
241 regulator-state-mem {
242 regulator-on-in-suspend;
243 regulator-suspend-microvolt = <1000000>;
247 vcc18_lcd: LDO_REG4 {
250 regulator-min-microvolt = <1800000>;
251 regulator-max-microvolt = <1800000>;
252 regulator-name = "vcc18_lcd";
253 regulator-state-mem {
254 regulator-on-in-suspend;
255 regulator-suspend-microvolt = <1800000>;
262 regulator-min-microvolt = <1800000>;
263 regulator-max-microvolt = <3300000>;
264 regulator-name = "vccio_sd";
265 regulator-state-mem {
266 regulator-on-in-suspend;
267 regulator-suspend-microvolt = <3300000>;
274 regulator-min-microvolt = <1800000>;
275 regulator-max-microvolt = <2500000>;
276 regulator-name = "vout5";
277 regulator-state-mem {
278 regulator-on-in-suspend;
279 regulator-suspend-microvolt = <1800000>;
286 regulator-min-microvolt = <1800000>;
287 regulator-max-microvolt = <1800000>;
288 regulator-name = "vcc_18";
289 regulator-state-mem {
290 regulator-on-in-suspend;
291 regulator-suspend-microvolt = <1800000>;
295 vcca_codec: LDO_REG8 {
298 regulator-min-microvolt = <1800000>;
299 regulator-max-microvolt = <1800000>;
300 regulator-name = "vcca_codec";
301 regulator-state-mem {
302 regulator-on-in-suspend;
303 regulator-suspend-microvolt = <1800000>;
307 vcc_wl: SWITCH_REG1 {
310 regulator-name = "vcc_wl";
311 regulator-state-mem {
312 regulator-on-in-suspend;
316 vcc_lcd: SWITCH_REG2 {
319 regulator-name = "vcc_lcd";
320 regulator-state-mem {
321 regulator-on-in-suspend;
332 compatible = "rt5616";
334 clocks = <&cru SCLK_I2S_OUT>;
335 clock-names = "mclk";
336 #sound-dai-cells = <0>;
341 #sound-dai-cells = <0>;
351 default-sample-phase = <90>;
352 keep-power-in-suspend;
353 mmc-pwrseq = <&sdio_pwrseq>;
356 pinctrl-names = "default";
357 pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
368 card-detect-delay = <200>;
371 pinctrl-names = "default";
372 pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
402 rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>;
408 rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
413 bt_wake_h: bt-wake-h {
414 rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>;
419 sdmmc_pwr: sdmmc-pwr {
420 rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
425 global_pwroff: global-pwroff {
426 rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;